diff options
-rw-r--r-- | Documentation/devicetree/bindings/hwmon/jc42.txt | 4 | ||||
-rw-r--r-- | MAINTAINERS | 1 | ||||
-rw-r--r-- | drivers/hwmon/jc42.c | 21 | ||||
-rw-r--r-- | drivers/hwmon/pmbus/pmbus_core.c | 21 |
4 files changed, 37 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt index 07a250498fbb..f569db58f64a 100644 --- a/Documentation/devicetree/bindings/hwmon/jc42.txt +++ b/Documentation/devicetree/bindings/hwmon/jc42.txt @@ -34,6 +34,10 @@ Required properties: - reg: I2C address +Optional properties: +- smbus-timeout-disable: When set, the smbus timeout function will be disabled. + This is not supported on all chips. + Example: temp-sensor@1a { diff --git a/MAINTAINERS b/MAINTAINERS index 77d819b458a9..d4fdcb12616c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6174,7 +6174,6 @@ M: Jean Delvare <jdelvare@suse.com> M: Guenter Roeck <linux@roeck-us.net> L: linux-hwmon@vger.kernel.org W: http://hwmon.wiki.kernel.org/ -T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git S: Maintained F: Documentation/hwmon/ diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 5f11dc014ed6..e5234f953a6d 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -22,6 +22,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/bitops.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> @@ -45,6 +46,7 @@ static const unsigned short normal_i2c[] = { #define JC42_REG_TEMP 0x05 #define JC42_REG_MANID 0x06 #define JC42_REG_DEVICEID 0x07 +#define JC42_REG_SMBUS 0x22 /* NXP and Atmel, possibly others? */ /* Status bits in temperature register */ #define JC42_ALARM_CRIT_BIT 15 @@ -75,6 +77,9 @@ static const unsigned short normal_i2c[] = { #define GT_MANID 0x1c68 /* Giantec */ #define GT_MANID2 0x132d /* Giantec, 2nd mfg ID */ +/* SMBUS register */ +#define SMBUS_STMOUT BIT(7) /* SMBus time-out, active low */ + /* Supported chips */ /* Analog Devices */ @@ -495,6 +500,22 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id) data->extended = !!(cap & JC42_CAP_RANGE); + if (device_property_read_bool(dev, "smbus-timeout-disable")) { + int smbus; + + /* + * Not all chips support this register, but from a + * quick read of various datasheets no chip appears + * incompatible with the below attempt to disable + * the timeout. And the whole thing is opt-in... + */ + smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS); + if (smbus < 0) + return smbus; + i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS, + smbus | SMBUS_STMOUT); + } + config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG); if (config < 0) return config; diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 52a58b8b6e1b..a139940cd991 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -21,6 +21,7 @@ #include <linux/debugfs.h> #include <linux/kernel.h> +#include <linux/math64.h> #include <linux/module.h> #include <linux/init.h> #include <linux/err.h> @@ -499,8 +500,8 @@ static long pmbus_reg2data_linear(struct pmbus_data *data, static long pmbus_reg2data_direct(struct pmbus_data *data, struct pmbus_sensor *sensor) { - long val = (s16) sensor->data; - long m, b, R; + s64 b, val = (s16)sensor->data; + s32 m, R; m = data->info->m[sensor->class]; b = data->info->b[sensor->class]; @@ -528,11 +529,12 @@ static long pmbus_reg2data_direct(struct pmbus_data *data, R--; } while (R < 0) { - val = DIV_ROUND_CLOSEST(val, 10); + val = div_s64(val + 5LL, 10L); /* round closest */ R++; } - return (val - b) / m; + val = div_s64(val - b, m); + return clamp_val(val, LONG_MIN, LONG_MAX); } /* @@ -656,7 +658,8 @@ static u16 pmbus_data2reg_linear(struct pmbus_data *data, static u16 pmbus_data2reg_direct(struct pmbus_data *data, struct pmbus_sensor *sensor, long val) { - long m, b, R; + s64 b, val64 = val; + s32 m, R; m = data->info->m[sensor->class]; b = data->info->b[sensor->class]; @@ -673,18 +676,18 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data, R -= 3; /* Adjust R and b for data in milli-units */ b *= 1000; } - val = val * m + b; + val64 = val64 * m + b; while (R > 0) { - val *= 10; + val64 *= 10; R--; } while (R < 0) { - val = DIV_ROUND_CLOSEST(val, 10); + val64 = div_s64(val64 + 5LL, 10L); /* round closest */ R++; } - return val; + return (u16)clamp_val(val64, S16_MIN, S16_MAX); } static u16 pmbus_data2reg_vid(struct pmbus_data *data, |