summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/phy/phy-rcar-usb.c51
1 files changed, 45 insertions, 6 deletions
diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
index d636cc742e8f..823b2bb807d2 100644
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
@@ -1,8 +1,9 @@
/*
* Renesas R-Car USB phy driver
*
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/module.h>
+#include <linux/platform_data/usb-rcar-phy.h>
/* REGS block */
#define USBPCTRL0 0x00
@@ -24,6 +26,25 @@
#define USBOH0 0x1C
#define USBCTL0 0x58
+/* USBPCTRL0 */
+#define OVC2 (1 << 10) /* Switches the OVC input pin for port 2: */
+ /* 1: USB_OVC2, 0: OVC2 */
+#define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */
+ /* 1: USB_OVC1, 0: OVC1/VBUS1 */
+ /* Function mode: set to 0 */
+#define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */
+ /* 1: USB_OVC0 pin, 0: OVC0 */
+#define OVC2_ACT (1 << 6) /* Host mode: OVC2 polarity: */
+ /* 1: active-high, 0: active-low */
+#define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */
+ /* 1: high, 0: low */
+#define OVC0_ACT (1 << 3) /* Host mode: OVC0 polarity: */
+ /* 1: active-high, 0: active-low */
+#define OVC1_ACT (1 << 1) /* Host mode: OVC1 polarity: */
+ /* 1: active-high, 0: active-low */
+ /* Function mode: be sure to set to 1 */
+#define PORT1 (1 << 0) /* Selects port 1 mode: */
+ /* 1: function, 0: host */
/* USBPCTRL1 */
#define PHY_RST (1 << 2)
#define PLL_ENB (1 << 1)
@@ -55,7 +76,9 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
{
struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
struct device *dev = phy->dev;
+ struct rcar_phy_platform_data *pdata = dev->platform_data;
void __iomem *reg0 = priv->reg0;
+ static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
int i;
u32 val;
unsigned long flags;
@@ -89,8 +112,21 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
/* (4) USB-PHY reset clear */
iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
- /* set platform specific port settings */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
+ /* Board specific port settings */
+ val = 0;
+ if (pdata->port1_func)
+ val |= PORT1;
+ if (pdata->penc1)
+ val |= PENC;
+ for (i = 0; i < 3; i++) {
+ /* OVCn bits follow each other in the right order */
+ if (pdata->ovc_pin[i].select_3_3v)
+ val |= OVC0 << i;
+ /* OVCn_ACT bits are spaced by irregular intervals */
+ if (pdata->ovc_pin[i].active_high)
+ val |= ovcn_act[i];
+ }
+ iowrite32(val, (reg0 + USBPCTRL0));
/*
* Bus alignment settings
@@ -117,10 +153,8 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy)
spin_lock_irqsave(&priv->lock, flags);
- if (priv->counter-- == 1) { /* last user */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
+ if (priv->counter-- == 1) /* last user */
iowrite32(0x00000000, (reg0 + USBPCTRL1));
- }
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -133,6 +167,11 @@ static int rcar_usb_phy_probe(struct platform_device *pdev)
void __iomem *reg0;
int ret;
+ if (!pdev->dev.platform_data) {
+ dev_err(dev, "No platform data\n");
+ return -EINVAL;
+ }
+
res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res0) {
dev_err(dev, "Not enough platform resources\n");