summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/bluetooth/Kconfig15
-rw-r--r--drivers/bluetooth/Makefile1
-rw-r--r--drivers/bluetooth/btbcm.c5
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c36
-rw-r--r--drivers/bluetooth/btmtksdio.c1101
-rw-r--r--drivers/bluetooth/btmtkuart.c2
-rw-r--r--drivers/bluetooth/btqca.h2
-rw-r--r--drivers/bluetooth/btsdio.c15
-rw-r--r--drivers/bluetooth/hci_bcm.c20
-rw-r--r--drivers/bluetooth/hci_h5.c2
-rw-r--r--drivers/bluetooth/hci_qca.c50
-rw-r--r--include/linux/mmc/sdio_func.h12
-rw-r--r--include/linux/mmc/sdio_ids.h2
-rw-r--r--include/net/bluetooth/hci_core.h3
-rw-r--r--net/6lowpan/nhc.c2
-rw-r--r--net/bluetooth/hci_conn.c8
-rw-r--r--net/bluetooth/hci_core.c2
-rw-r--r--net/bluetooth/hci_event.c2
-rw-r--r--net/bluetooth/hidp/sock.c1
-rw-r--r--net/bluetooth/l2cap_core.c9
-rw-r--r--net/bluetooth/l2cap_sock.c7
-rw-r--r--net/bluetooth/mgmt.c11
22 files changed, 1246 insertions, 62 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 7b2e76e7f22f..b9c34ff9a0d3 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -336,7 +336,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8997.
+ Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -350,7 +350,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997
+ devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
@@ -379,6 +379,17 @@ config BT_WILINK
Say Y here to compile support for Texas Instrument's WiLink7 driver
into the kernel or say M to compile it as module (btwilink).
+config BT_MTKSDIO
+ tristate "MediaTek HCI SDIO driver"
+ depends on MMC
+ help
+ MediaTek Bluetooth HCI SDIO driver.
+ This driver is required if you want to use MediaTek Bluetooth
+ with SDIO interface.
+
+ Say Y here to compile support for MediaTek Bluetooth SDIO devices
+ into the kernel or say M to compile it as module (btmtksdio).
+
config BT_MTKUART
tristate "MediaTek HCI UART driver"
depends on SERIAL_DEV_BUS
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index b7e393cfc1e3..34887b9b3a85 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_BT_ATH3K) += ath3k.o
obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
+obj-$(CONFIG_BT_MTKSDIO) += btmtksdio.o
obj-$(CONFIG_BT_MTKUART) += btmtkuart.o
obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
obj-$(CONFIG_BT_BCM) += btbcm.o
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index d5d6e6e5da3b..71e74ec08310 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -37,6 +37,7 @@
#define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
#define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
+#define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}})
int btbcm_check_bdaddr(struct hci_dev *hdev)
{
@@ -82,7 +83,8 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
!bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
- !bacmp(&bda->bdaddr, BDADDR_BCM43430A0)) {
+ !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) ||
+ !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) {
bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
&bda->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
@@ -333,6 +335,7 @@ struct bcm_subver_table {
static const struct bcm_subver_table bcm_uart_subver_table[] = {
{ 0x4103, "BCM4330B1" }, /* 002.001.003 */
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
+ { 0x4204, "BCM2076B1" }, /* 002.002.004 */
{ 0x4406, "BCM4324B3" }, /* 002.004.006 */
{ 0x6109, "BCM4335C0" }, /* 003.001.009 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 047b75ce1deb..0f3a020703ab 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -235,6 +235,29 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
.fw_dump_end = 0xf8,
};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
+ .cfg = 0x00,
+ .host_int_mask = 0x08,
+ .host_intstatus = 0x0c,
+ .card_status = 0x5c,
+ .sq_read_base_addr_a0 = 0xf8,
+ .sq_read_base_addr_a1 = 0xf9,
+ .card_revision = 0xc8,
+ .card_fw_status0 = 0xe8,
+ .card_fw_status1 = 0xe9,
+ .card_rx_len = 0xea,
+ .card_rx_unit = 0xeb,
+ .io_port_0 = 0xe4,
+ .io_port_1 = 0xe5,
+ .io_port_2 = 0xe6,
+ .int_read_to_clear = true,
+ .host_int_rsr = 0x04,
+ .card_misc_cfg = 0xd8,
+ .fw_dump_ctrl = 0xf0,
+ .fw_dump_start = 0xf1,
+ .fw_dump_end = 0xf8,
+};
+
static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
.cfg = 0x00,
.host_int_mask = 0x08,
@@ -312,6 +335,15 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
.supports_fw_dump = true,
};
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
+ .helper = NULL,
+ .firmware = "mrvl/sd8987_uapsta.bin",
+ .reg = &btmrvl_reg_8987,
+ .support_pscan_win_report = true,
+ .sd_blksz_fw_dl = 256,
+ .supports_fw_dump = true,
+};
+
static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
.helper = NULL,
.firmware = "mrvl/sd8997_uapsta.bin",
@@ -343,6 +375,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8977 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9146),
.driver_data = (unsigned long)&btmrvl_sdio_sd8977 },
+ /* Marvell SD8987 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x914A),
+ .driver_data = (unsigned long)&btmrvl_sdio_sd8987 },
/* Marvell SD8997 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
@@ -1797,4 +1832,5 @@ MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8977_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8987_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
new file mode 100644
index 000000000000..813338288453
--- /dev/null
+++ b/drivers/bluetooth/btmtksdio.c
@@ -0,0 +1,1101 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 MediaTek Inc.
+
+/*
+ * Bluetooth support for MediaTek SDIO devices
+ *
+ * This file is written based on btsdio.c and btmtkuart.c.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/atomic.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/skbuff.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "h4_recv.h"
+
+#define VERSION "0.1"
+
+#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
+#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
+
+#define MTKBTSDIO_AUTOSUSPEND_DELAY 8000
+
+static bool enable_autosuspend;
+
+struct btmtksdio_data {
+ const char *fwname;
+};
+
+static const struct btmtksdio_data mt7663_data = {
+ .fwname = FIRMWARE_MT7663,
+};
+
+static const struct btmtksdio_data mt7668_data = {
+ .fwname = FIRMWARE_MT7668,
+};
+
+static const struct sdio_device_id btmtksdio_table[] = {
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7663),
+ .driver_data = (kernel_ulong_t)&mt7663_data },
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7668),
+ .driver_data = (kernel_ulong_t)&mt7668_data },
+ { } /* Terminating entry */
+};
+
+#define MTK_REG_CHLPCR 0x4 /* W1S */
+#define C_INT_EN_SET BIT(0)
+#define C_INT_EN_CLR BIT(1)
+#define C_FW_OWN_REQ_SET BIT(8) /* For write */
+#define C_COM_DRV_OWN BIT(8) /* For read */
+#define C_FW_OWN_REQ_CLR BIT(9)
+
+#define MTK_REG_CSDIOCSR 0x8
+#define SDIO_RE_INIT_EN BIT(0)
+#define SDIO_INT_CTL BIT(2)
+
+#define MTK_REG_CHCR 0xc
+#define C_INT_CLR_CTRL BIT(1)
+
+/* CHISR have the same bits field definition with CHIER */
+#define MTK_REG_CHISR 0x10
+#define MTK_REG_CHIER 0x14
+#define FW_OWN_BACK_INT BIT(0)
+#define RX_DONE_INT BIT(1)
+#define TX_EMPTY BIT(2)
+#define TX_FIFO_OVERFLOW BIT(8)
+#define RX_PKT_LEN GENMASK(31, 16)
+
+#define MTK_REG_CTDR 0x18
+
+#define MTK_REG_CRDR 0x1c
+
+#define MTK_SDIO_BLOCK_SIZE 256
+
+#define BTMTKSDIO_TX_WAIT_VND_EVT 1
+
+enum {
+ MTK_WMT_PATCH_DWNLD = 0x1,
+ MTK_WMT_TEST = 0x2,
+ MTK_WMT_WAKEUP = 0x3,
+ MTK_WMT_HIF = 0x4,
+ MTK_WMT_FUNC_CTRL = 0x6,
+ MTK_WMT_RST = 0x7,
+ MTK_WMT_SEMAPHORE = 0x17,
+};
+
+enum {
+ BTMTK_WMT_INVALID,
+ BTMTK_WMT_PATCH_UNDONE,
+ BTMTK_WMT_PATCH_DONE,
+ BTMTK_WMT_ON_UNDONE,
+ BTMTK_WMT_ON_DONE,
+ BTMTK_WMT_ON_PROGRESS,
+};
+
+struct mtkbtsdio_hdr {
+ __le16 len;
+ __le16 reserved;
+ u8 bt_type;
+} __packed;
+
+struct mtk_wmt_hdr {
+ u8 dir;
+ u8 op;
+ __le16 dlen;
+ u8 flag;
+} __packed;
+
+struct mtk_hci_wmt_cmd {
+ struct mtk_wmt_hdr hdr;
+ u8 data[256];
+} __packed;
+
+struct btmtk_hci_wmt_evt {
+ struct hci_event_hdr hhdr;
+ struct mtk_wmt_hdr whdr;
+} __packed;
+
+struct btmtk_hci_wmt_evt_funcc {
+ struct btmtk_hci_wmt_evt hwhdr;
+ __be16 status;
+} __packed;
+
+struct btmtk_tci_sleep {
+ u8 mode;
+ __le16 duration;
+ __le16 host_duration;
+ u8 host_wakeup_pin;
+ u8 time_compensation;
+} __packed;
+
+struct btmtk_hci_wmt_params {
+ u8 op;
+ u8 flag;
+ u16 dlen;
+ const void *data;
+ u32 *status;
+};
+
+struct btmtksdio_dev {
+ struct hci_dev *hdev;
+ struct sdio_func *func;
+ struct device *dev;
+
+ struct work_struct tx_work;
+ unsigned long tx_state;
+ struct sk_buff_head txq;
+
+ struct sk_buff *evt_skb;
+
+ const struct btmtksdio_data *data;
+};
+
+static int mtk_hci_wmt_sync(struct hci_dev *hdev,
+ struct btmtk_hci_wmt_params *wmt_params)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+ u32 hlen, status = BTMTK_WMT_INVALID;
+ struct btmtk_hci_wmt_evt *wmt_evt;
+ struct mtk_hci_wmt_cmd wc;
+ struct mtk_wmt_hdr *hdr;
+ int err;
+
+ hlen = sizeof(*hdr) + wmt_params->dlen;
+ if (hlen > 255)
+ return -EINVAL;
+
+ hdr = (struct mtk_wmt_hdr *)&wc;
+ hdr->dir = 1;
+ hdr->op = wmt_params->op;
+ hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
+ hdr->flag = wmt_params->flag;
+ memcpy(wc.data, wmt_params->data, wmt_params->dlen);
+
+ set_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+
+ err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
+ if (err < 0) {
+ clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+ return err;
+ }
+
+ /* The vendor specific WMT commands are all answered by a vendor
+ * specific event and will not have the Command Status or Command
+ * Complete as with usual HCI command flow control.
+ *
+ * After sending the command, wait for BTMTKSDIO_TX_WAIT_VND_EVT
+ * state to be cleared. The driver specific event receive routine
+ * will clear that state and with that indicate completion of the
+ * WMT command.
+ */
+ err = wait_on_bit_timeout(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT,
+ TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Execution of wmt command interrupted");
+ clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+ return err;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Execution of wmt command timed out");
+ clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+ return -ETIMEDOUT;
+ }
+
+ /* Parse and handle the return WMT event */
+ wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
+ if (wmt_evt->whdr.op != hdr->op) {
+ bt_dev_err(hdev, "Wrong op received %d expected %d",
+ wmt_evt->whdr.op, hdr->op);
+ err = -EIO;
+ goto err_free_skb;
+ }
+
+ switch (wmt_evt->whdr.op) {
+ case MTK_WMT_SEMAPHORE:
+ if (wmt_evt->whdr.flag == 2)
+ status = BTMTK_WMT_PATCH_UNDONE;
+ else
+ status = BTMTK_WMT_PATCH_DONE;
+ break;
+ case MTK_WMT_FUNC_CTRL:
+ wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+ if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+ status = BTMTK_WMT_ON_DONE;
+ else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+ status = BTMTK_WMT_ON_PROGRESS;
+ else
+ status = BTMTK_WMT_ON_UNDONE;
+ break;
+ }
+
+ if (wmt_params->status)
+ *wmt_params->status = status;
+
+err_free_skb:
+ kfree_skb(bdev->evt_skb);
+ bdev->evt_skb = NULL;
+
+ return err;
+}
+
+static int btmtksdio_tx_packet(struct btmtksdio_dev *bdev,
+ struct sk_buff *skb)
+{
+ struct mtkbtsdio_hdr *sdio_hdr;
+ int err;
+
+ /* Make sure that there are enough rooms for SDIO header */
+ if (unlikely(skb_headroom(skb) < sizeof(*sdio_hdr))) {
+ err = pskb_expand_head(skb, sizeof(*sdio_hdr), 0,
+ GFP_ATOMIC);
+ if (err < 0)
+ return err;
+ }
+
+ /* Prepend MediaTek SDIO Specific Header */
+ skb_push(skb, sizeof(*sdio_hdr));
+
+ sdio_hdr = (void *)skb->data;
+ sdio_hdr->len = cpu_to_le16(skb->len);
+ sdio_hdr->reserved = cpu_to_le16(0);
+ sdio_hdr->bt_type = hci_skb_pkt_type(skb);
+
+ err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data,
+ round_up(skb->len, MTK_SDIO_BLOCK_SIZE));
+ if (err < 0)
+ goto err_skb_pull;
+
+ bdev->hdev->stat.byte_tx += skb->len;
+
+ kfree_skb(skb);
+
+ return 0;
+
+err_skb_pull:
+ skb_pull(skb, sizeof(*sdio_hdr));
+
+ return err;
+}
+
+static u32 btmtksdio_drv_own_query(struct btmtksdio_dev *bdev)
+{
+ return sdio_readl(bdev->func, MTK_REG_CHLPCR, NULL);
+}
+
+static void btmtksdio_tx_work(struct work_struct *work)
+{
+ struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev,
+ tx_work);
+ struct sk_buff *skb;
+ int err;
+
+ pm_runtime_get_sync(bdev->dev);
+
+ sdio_claim_host(bdev->func);
+
+ while ((skb = skb_dequeue(&bdev->txq))) {
+ err = btmtksdio_tx_packet(bdev, skb);
+ if (err < 0) {
+ bdev->hdev->stat.err_tx++;
+ skb_queue_head(&bdev->txq, skb);
+ break;
+ }
+ }
+
+ sdio_release_host(bdev->func);
+
+ pm_runtime_mark_last_busy(bdev->dev);
+ pm_runtime_put_autosuspend(bdev->dev);
+}
+
+static int btmtksdio_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ struct hci_event_hdr *hdr = (void *)skb->data;
+ int err;
+
+ /* Fix up the vendor event id with 0xff for vendor specific instead
+ * of 0xe4 so that event send via monitoring socket can be parsed
+ * properly.
+ */
+ if (hdr->evt == 0xe4)
+ hdr->evt = HCI_EV_VENDOR;
+
+ /* When someone waits for the WMT event, the skb is being cloned
+ * and being processed the events from there then.
+ */
+ if (test_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state)) {
+ bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
+ if (!bdev->evt_skb) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ }
+
+ err = hci_recv_frame(hdev, skb);
+ if (err < 0)
+ goto err_free_skb;
+
+ if (hdr->evt == HCI_EV_VENDOR) {
+ if (test_and_clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT,
+ &bdev->tx_state)) {
+ /* Barrier to sync with other CPUs */
+ smp_mb__after_atomic();
+ wake_up_bit(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT);
+ }
+ }
+
+ return 0;
+
+err_free_skb:
+ kfree_skb(bdev->evt_skb);
+ bdev->evt_skb = NULL;
+
+err_out:
+ return err;
+}
+
+static const struct h4_recv_pkt mtk_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = btmtksdio_recv_event },
+};
+
+static int btmtksdio_rx_packet(struct btmtksdio_dev *bdev, u16 rx_size)
+{
+ const struct h4_recv_pkt *pkts = mtk_recv_pkts;
+ int pkts_count = ARRAY_SIZE(mtk_recv_pkts);
+ struct mtkbtsdio_hdr *sdio_hdr;
+ int err, i, pad_size;
+ struct sk_buff *skb;
+ u16 dlen;
+
+ if (rx_size < sizeof(*sdio_hdr))
+ return -EILSEQ;
+
+ /* A SDIO packet is exactly containing a Bluetooth packet */
+ skb = bt_skb_alloc(rx_size, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_put(skb, rx_size);
+
+ err = sdio_readsb(bdev->func, skb->data, MTK_REG_CRDR, rx_size);
+ if (err < 0)
+ goto err_kfree_skb;
+
+ sdio_hdr = (void *)skb->data;
+
+ /* We assume the default error as -EILSEQ simply to make the error path
+ * be cleaner.
+ */
+ err = -EILSEQ;
+
+ if (rx_size != le16_to_cpu(sdio_hdr->len)) {
+ bt_dev_err(bdev->hdev, "Rx size in sdio header is mismatched ");
+ goto err_kfree_skb;
+ }
+
+ hci_skb_pkt_type(skb) = sdio_hdr->bt_type;
+
+ /* Remove MediaTek SDIO header */
+ skb_pull(skb, sizeof(*sdio_hdr));
+
+ /* We have to dig into the packet to get payload size and then know how
+ * many padding bytes at the tail, these padding bytes should be removed
+ * before the packet is indicated to the core layer.
+ */
+ for (i = 0; i < pkts_count; i++) {
+ if (sdio_hdr->bt_type == (&pkts[i])->type)
+ break;
+ }
+
+ if (i >= pkts_count) {
+ bt_dev_err(bdev->hdev, "Invalid bt type 0x%02x",
+ sdio_hdr->bt_type);
+ goto err_kfree_skb;
+ }
+
+ /* Remaining bytes cannot hold a header*/
+ if (skb->len < (&pkts[i])->hlen) {
+ bt_dev_err(bdev->hdev, "The size of bt header is mismatched");
+ goto err_kfree_skb;
+ }
+
+ switch ((&pkts[i])->lsize) {
+ case 1:
+ dlen = skb->data[(&pkts[i])->loff];
+ break;
+ case 2:
+ dlen = get_unaligned_le16(skb->data +
+ (&pkts[i])->loff);
+ break;
+ default:
+ goto err_kfree_skb;
+ }
+
+ pad_size = skb->len - (&pkts[i])->hlen - dlen;
+
+ /* Remaining bytes cannot hold a payload */
+ if (pad_size < 0) {
+ bt_dev_err(bdev->hdev, "The size of bt payload is mismatched");
+ goto err_kfree_skb;
+ }
+
+ /* Remove padding bytes */
+ skb_trim(skb, skb->len - pad_size);
+
+ /* Complete frame */
+ (&pkts[i])->recv(bdev->hdev, skb);
+
+ bdev->hdev->stat.byte_rx += rx_size;
+
+ return 0;
+
+err_kfree_skb:
+ kfree_skb(skb);
+
+ return err;
+}
+
+static void btmtksdio_interrupt(struct sdio_func *func)
+{
+ struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+ u32 int_status;
+ u16 rx_size;
+
+ /* It is required that the host gets ownership from the device before
+ * accessing any register, however, if SDIO host is not being released,
+ * a potential deadlock probably happens in a circular wait between SDIO
+ * IRQ work and PM runtime work. So, we have to explicitly release SDIO
+ * host here and claim again after the PM runtime work is all done.
+ */
+ sdio_release_host(bdev->func);
+
+ pm_runtime_get_sync(bdev->dev);
+
+ sdio_claim_host(bdev->func);
+
+ /* Disable interrupt */
+ sdio_writel(func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
+
+ int_status = sdio_readl(func, MTK_REG_CHISR, NULL);
+
+ /* Ack an interrupt as soon as possible before any operation on
+ * hardware.
+ *
+ * Note that we don't ack any status during operations to avoid race
+ * condition between the host and the device such as it's possible to
+ * mistakenly ack RX_DONE for the next packet and then cause interrupts
+ * not be raised again but there is still pending data in the hardware
+ * FIFO.
+ */
+ sdio_writel(func, int_status, MTK_REG_CHISR, NULL);
+
+ if (unlikely(!int_status))
+ bt_dev_err(bdev->hdev, "CHISR is 0");
+
+ if (int_status & FW_OWN_BACK_INT)
+ bt_dev_dbg(bdev->hdev, "Get fw own back");
+
+ if (int_status & TX_EMPTY)
+ schedule_work(&bdev->tx_work);
+ else if (unlikely(int_status & TX_FIFO_OVERFLOW))
+ bt_dev_warn(bdev->hdev, "Tx fifo overflow");
+
+ if (int_status & RX_DONE_INT) {
+ rx_size = (int_status & RX_PKT_LEN) >> 16;
+
+ if (btmtksdio_rx_packet(bdev, rx_size) < 0)
+ bdev->hdev->stat.err_rx++;
+ }
+
+ /* Enable interrupt */
+ sdio_writel(func, C_INT_EN_SET, MTK_REG_CHLPCR, 0);
+
+ pm_runtime_mark_last_busy(bdev->dev);
+ pm_runtime_put_autosuspend(bdev->dev);
+}
+
+static int btmtksdio_open(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ int err;
+ u32 status;
+
+ sdio_claim_host(bdev->func);
+
+ err = sdio_enable_func(bdev->func);
+ if (err < 0)
+ goto err_release_host;
+
+ /* Get ownership from the device */
+ sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto err_disable_func;
+
+ err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+ status & C_COM_DRV_OWN, 2000, 1000000);
+ if (err < 0) {
+ bt_dev_err(bdev->hdev, "Cannot get ownership from device");
+ goto err_disable_func;
+ }
+
+ /* Disable interrupt & mask out all interrupt sources */
+ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto err_disable_func;
+
+ sdio_writel(bdev->func, 0, MTK_REG_CHIER, &err);
+ if (err < 0)
+ goto err_disable_func;
+
+ err = sdio_claim_irq(bdev->func, btmtksdio_interrupt);
+ if (err < 0)
+ goto err_disable_func;
+
+ err = sdio_set_block_size(bdev->func, MTK_SDIO_BLOCK_SIZE);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* SDIO CMD 5 allows the SDIO device back to idle state an
+ * synchronous interrupt is supported in SDIO 4-bit mode
+ */
+ sdio_writel(bdev->func, SDIO_INT_CTL | SDIO_RE_INIT_EN,
+ MTK_REG_CSDIOCSR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* Setup write-1-clear for CHISR register */
+ sdio_writel(bdev->func, C_INT_CLR_CTRL, MTK_REG_CHCR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* Setup interrupt sources */
+ sdio_writel(bdev->func, RX_DONE_INT | TX_EMPTY | TX_FIFO_OVERFLOW,
+ MTK_REG_CHIER, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* Enable interrupt */
+ sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ sdio_release_host(bdev->func);
+
+ return 0;
+
+err_release_irq:
+ sdio_release_irq(bdev->func);
+
+err_disable_func:
+ sdio_disable_func(bdev->func);
+
+err_release_host:
+ sdio_release_host(bdev->func);
+
+ return err;
+}
+
+static int btmtksdio_close(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ u32 status;
+ int err;
+
+ sdio_claim_host(bdev->func);
+
+ /* Disable interrupt */
+ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL);
+
+ sdio_release_irq(bdev->func);
+
+ /* Return ownership to the device */
+ sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, NULL);
+
+ err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+ !(status & C_COM_DRV_OWN), 2000, 1000000);
+ if (err < 0)
+ bt_dev_err(bdev->hdev, "Cannot return ownership to device");
+
+ sdio_disable_func(bdev->func);
+
+ sdio_release_host(bdev->func);
+
+ return 0;
+}
+
+static int btmtksdio_flush(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+ skb_queue_purge(&bdev->txq);
+
+ cancel_work_sync(&bdev->tx_work);
+
+ return 0;
+}
+
+static int btmtksdio_func_query(struct hci_dev *hdev)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ int status, err;
+ u8 param = 0;
+
+ /* Query whether the function is enabled */
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 4;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = &status;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to query function status (%d)", err);
+ return err;
+ }
+
+ return status;
+}
+
+static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ size_t fw_size;
+ int err, dlen;
+ u8 flag;
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+ return err;
+ }
+
+ fw_ptr = fw->data;
+ fw_size = fw->size;
+
+ /* The size of patch header is 30 bytes, should be skip */
+ if (fw_size < 30) {
+ err = -EINVAL;
+ goto free_fw;
+ }
+
+ fw_size -= 30;
+ fw_ptr += 30;
+ flag = 1;
+
+ wmt_params.op = MTK_WMT_PATCH_DWNLD;
+ wmt_params.status = NULL;
+
+ while (fw_size > 0) {
+ dlen = min_t(int, 250, fw_size);
+
+ /* Tell device the position in sequence */
+ if (fw_size - dlen <= 0)
+ flag = 3;
+ else if (fw_size < fw->size - 30)
+ flag = 2;
+
+ wmt_params.flag = flag;
+ wmt_params.dlen = dlen;
+ wmt_params.data = fw_ptr;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+ err);
+ goto free_fw;
+ }
+
+ fw_size -= dlen;
+ fw_ptr += dlen;
+ }
+
+ wmt_params.op = MTK_WMT_RST;
+ wmt_params.flag = 4;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = NULL;
+
+ /* Activate funciton the firmware providing to */
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+ goto free_fw;
+ }
+
+ /* Wait a few moments for firmware activation done */
+ usleep_range(10000, 12000);
+
+free_fw:
+ release_firmware(fw);
+ return err;
+}
+
+static int btmtksdio_setup(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_params wmt_params;
+ ktime_t calltime, delta, rettime;
+ struct btmtk_tci_sleep tci_sleep;
+ unsigned long long duration;
+ struct sk_buff *skb;
+ int err, status;
+ u8 param = 0x1;
+
+ calltime = ktime_get();
+
+ /* Query whether the firmware is already download */
+ wmt_params.op = MTK_WMT_SEMAPHORE;
+ wmt_params.flag = 1;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = &status;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+ return err;
+ }
+
+ if (status == BTMTK_WMT_PATCH_DONE) {
+ bt_dev_info(hdev, "Firmware already downloaded");
+ goto ignore_setup_fw;
+ }
+
+ /* Setup a firmware which the device definitely requires */
+ err = mtk_setup_firmware(hdev, bdev->data->fwname);
+ if (err < 0)
+ return err;
+
+ignore_setup_fw:
+ /* Query whether the device is already enabled */
+ err = readx_poll_timeout(btmtksdio_func_query, hdev, status,
+ status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+ 2000, 5000000);
+ /* -ETIMEDOUT happens */
+ if (err < 0)
+ return err;
+
+ /* The other errors happen in btusb_mtk_func_query */
+ if (status < 0)
+ return status;
+
+ if (status == BTMTK_WMT_ON_DONE) {
+ bt_dev_info(hdev, "function already on");
+ goto ignore_func_on;
+ }
+
+ /* Enable Bluetooth protocol */
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 0;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+ return err;
+ }
+
+ignore_func_on:
+ /* Apply the low power environment setup */
+ tci_sleep.mode = 0x5;
+ tci_sleep.duration = cpu_to_le16(0x640);
+ tci_sleep.host_duration = cpu_to_le16(0x640);
+ tci_sleep.host_wakeup_pin = 0;
+ tci_sleep.time_compensation = 0;
+
+ skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+ pm_runtime_set_autosuspend_delay(bdev->dev,
+ MTKBTSDIO_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(bdev->dev);
+
+ err = pm_runtime_set_active(bdev->dev);
+ if (err < 0)
+ return err;
+
+ /* Default forbid runtime auto suspend, that can be allowed by
+ * enable_autosuspend flag or the PM runtime entry under sysfs.
+ */
+ pm_runtime_forbid(bdev->dev);
+ pm_runtime_enable(bdev->dev);
+
+ if (enable_autosuspend)
+ pm_runtime_allow(bdev->dev);
+
+ bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
+ return 0;
+}
+
+static int btmtksdio_shutdown(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_params wmt_params;
+ u8 param = 0x0;
+ int err;
+
+ /* Get back the state to be consistent with the state
+ * in btmtksdio_setup.
+ */
+ pm_runtime_get_sync(bdev->dev);
+
+ /* Disable the device */
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 0;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+ return err;
+ }
+
+ pm_runtime_put_noidle(bdev->dev);
+ pm_runtime_disable(bdev->dev);
+
+ return 0;
+}
+
+static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+ switch (hci_skb_pkt_type(skb)) {
+ case HCI_COMMAND_PKT:
+ hdev->stat.cmd_tx++;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ hdev->stat.acl_tx++;
+ break;
+
+ case HCI_SCODATA_PKT:
+ hdev->stat.sco_tx++;
+ break;
+
+ default:
+ return -EILSEQ;
+ }
+
+ skb_queue_tail(&bdev->txq, skb);
+
+ schedule_work(&bdev->tx_work);
+
+ return 0;
+}
+
+static int btmtksdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct btmtksdio_dev *bdev;
+ struct hci_dev *hdev;
+ int err;
+
+ bdev = devm_kzalloc(&func->dev, sizeof(*bdev), GFP_KERNEL);
+ if (!bdev)
+ return -ENOMEM;
+
+ bdev->data = (void *)id->driver_data;
+ if (!bdev->data)
+ return -ENODEV;
+
+ bdev->dev = &func->dev;
+ bdev->func = func;
+
+ INIT_WORK(&bdev->tx_work, btmtksdio_tx_work);
+ skb_queue_head_init(&bdev->txq);
+
+ /* Initialize and register HCI device */
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ dev_err(&func->dev, "Can't allocate HCI device\n");
+ return -ENOMEM;
+ }
+
+ bdev->hdev = hdev;
+
+ hdev->bus = HCI_SDIO;
+ hci_set_drvdata(hdev, bdev);
+
+ hdev->open = btmtksdio_open;
+ hdev->close = btmtksdio_close;
+ hdev->flush = btmtksdio_flush;
+ hdev->setup = btmtksdio_setup;
+ hdev->shutdown = btmtksdio_shutdown;
+ hdev->send = btmtksdio_send_frame;
+ SET_HCIDEV_DEV(hdev, &func->dev);
+
+ hdev->manufacturer = 70;
+ set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+
+ err = hci_register_dev(hdev);
+ if (err < 0) {
+ dev_err(&func->dev, "Can't register HCI device\n");
+ hci_free_dev(hdev);
+ return err;
+ }
+
+ sdio_set_drvdata(func, bdev);
+
+ /* pm_runtime_enable would be done after the firmware is being
+ * downloaded because the core layer probably already enables
+ * runtime PM for this func such as the case host->caps &
+ * MMC_CAP_POWER_OFF_CARD.
+ */
+ if (pm_runtime_enabled(bdev->dev))
+ pm_runtime_disable(bdev->dev);
+
+ /* As explaination in drivers/mmc/core/sdio_bus.c tells us:
+ * Unbound SDIO functions are always suspended.
+ * During probe, the function is set active and the usage count
+ * is incremented. If the driver supports runtime PM,
+ * it should call pm_runtime_put_noidle() in its probe routine and
+ * pm_runtime_get_noresume() in its remove routine.
+ *
+ * So, put a pm_runtime_put_noidle here !
+ */
+ pm_runtime_put_noidle(bdev->dev);
+
+ return 0;
+}
+
+static void btmtksdio_remove(struct sdio_func *func)
+{
+ struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+ struct hci_dev *hdev;
+
+ if (!bdev)
+ return;
+
+ /* Be consistent the state in btmtksdio_probe */
+ pm_runtime_get_noresume(bdev->dev);
+
+ hdev = bdev->hdev;
+
+ sdio_set_drvdata(func, NULL);
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+}
+
+#ifdef CONFIG_PM
+static int btmtksdio_runtime_suspend(struct device *dev)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct btmtksdio_dev *bdev;
+ u32 status;
+ int err;
+
+ bdev = sdio_get_drvdata(func);
+ if (!bdev)
+ return 0;
+
+ sdio_claim_host(bdev->func);
+
+ sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto out;
+
+ err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+ !(status & C_COM_DRV_OWN), 2000, 1000000);
+out:
+ bt_dev_info(bdev->hdev, "status (%d) return ownership to device", err);
+
+ sdio_release_host(bdev->func);
+
+ return err;
+}
+
+static int btmtksdio_runtime_resume(struct device *dev)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct btmtksdio_dev *bdev;
+ u32 status;
+ int err;
+
+ bdev = sdio_get_drvdata(func);
+ if (!bdev)
+ return 0;
+
+ sdio_claim_host(bdev->func);
+
+ sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto out;
+
+ err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+ status & C_COM_DRV_OWN, 2000, 1000000);
+out:
+ bt_dev_info(bdev->hdev, "status (%d) get ownership from device", err);
+
+ sdio_release_host(bdev->func);
+
+ return err;
+}
+
+static UNIVERSAL_DEV_PM_OPS(btmtksdio_pm_ops, btmtksdio_runtime_suspend,
+ btmtksdio_runtime_resume, NULL);
+#define BTMTKSDIO_PM_OPS (&btmtksdio_pm_ops)
+#else /* CONFIG_PM */
+#define BTMTKSDIO_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct sdio_driver btmtksdio_driver = {
+ .name = "btmtksdio",
+ .probe = btmtksdio_probe,
+ .remove = btmtksdio_remove,
+ .id_table = btmtksdio_table,
+ .drv = {
+ .owner = THIS_MODULE,
+ .pm = BTMTKSDIO_PM_OPS,
+ }
+};
+
+module_sdio_driver(btmtksdio_driver);
+
+module_param(enable_autosuspend, bool, 0644);
+MODULE_PARM_DESC(enable_autosuspend, "Enable autosuspend by default");
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek Bluetooth SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FIRMWARE_MT7663);
+MODULE_FIRMWARE(FIRMWARE_MT7668);
diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index b0b680dd69f4..f5dbeec8e274 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -661,7 +661,7 @@ static int btmtkuart_change_baudrate(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct btmtk_hci_wmt_params wmt_params;
- u32 baudrate;
+ __le32 baudrate;
u8 param;
int err;
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index c72c56ea7480..6fdc25d7bba7 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -41,7 +41,7 @@
#define QCA_WCN3990_POWERON_PULSE 0xFC
#define QCA_WCN3990_POWEROFF_PULSE 0xC0
-enum qca_bardrate {
+enum qca_baudrate {
QCA_BAUDRATE_115200 = 0,
QCA_BAUDRATE_57600,
QCA_BAUDRATE_38400,
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 282d1af1d3ba..4cfa9abe03c8 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -376,20 +376,7 @@ static struct sdio_driver btsdio_driver = {
.id_table = btsdio_table,
};
-static int __init btsdio_init(void)
-{
- BT_INFO("Generic Bluetooth SDIO driver ver %s", VERSION);
-
- return sdio_register_driver(&btsdio_driver);
-}
-
-static void __exit btsdio_exit(void)
-{
- sdio_unregister_driver(&btsdio_driver);
-}
-
-module_init(btsdio_init);
-module_exit(btsdio_exit);
+module_sdio_driver(btsdio_driver);
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Generic Bluetooth SDIO driver ver " VERSION);
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index ddbe518c3e5b..b5d31d583d60 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -228,9 +228,15 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
int err;
if (powered && !dev->res_enabled) {
- err = regulator_bulk_enable(BCM_NUM_SUPPLIES, dev->supplies);
- if (err)
- return err;
+ /* Intel Macs use bcm_apple_get_resources() and don't
+ * have regulator supplies configured.
+ */
+ if (dev->supplies[0].supply) {
+ err = regulator_bulk_enable(BCM_NUM_SUPPLIES,
+ dev->supplies);
+ if (err)
+ return err;
+ }
/* LPO clock needs to be 32.768 kHz */
err = clk_set_rate(dev->lpo_clk, 32768);
@@ -259,7 +265,13 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
if (!powered && dev->res_enabled) {
clk_disable_unprepare(dev->txco_clk);
clk_disable_unprepare(dev->lpo_clk);
- regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies);
+
+ /* Intel Macs use bcm_apple_get_resources() and don't
+ * have regulator supplies configured.
+ */
+ if (dev->supplies[0].supply)
+ regulator_bulk_disable(BCM_NUM_SUPPLIES,
+ dev->supplies);
}
/* wait for device to power on and come out of reset */
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 069d1c8fde73..3f02ae560120 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -536,7 +536,7 @@ static void h5_unslip_one_byte(struct h5 *h5, unsigned char c)
skb_put_data(h5->rx_skb, byte, 1);
h5->rx_pending--;
- BT_DBG("unsliped 0x%02hhx, rx_pending %zu", *byte, h5->rx_pending);
+ BT_DBG("unslipped 0x%02hhx, rx_pending %zu", *byte, h5->rx_pending);
}
static void h5_reset_rx(struct h5 *h5)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 237aea34b69f..7f75652686fe 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -174,6 +174,21 @@ static int qca_power_setup(struct hci_uart *hu, bool on);
static void qca_power_shutdown(struct hci_uart *hu);
static int qca_power_off(struct hci_dev *hdev);
+static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
+{
+ enum qca_btsoc_type soc_type;
+
+ if (hu->serdev) {
+ struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+ soc_type = qsd->btsoc_type;
+ } else {
+ soc_type = QCA_ROME;
+ }
+
+ return soc_type;
+}
+
static void __serial_clock_on(struct tty_struct *tty)
{
/* TODO: Some chipset requires to enable UART clock on client
@@ -508,6 +523,8 @@ static int qca_open(struct hci_uart *hu)
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->btsoc_type != QCA_WCN3990) {
gpiod_set_value_cansleep(qcadev->bt_en, 1);
+ /* Controller needs time to bootup. */
+ msleep(150);
} else {
hu->init_speed = qcadev->init_speed;
hu->oper_speed = qcadev->oper_speed;
@@ -963,7 +980,6 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
- struct qca_serdev *qcadev;
struct sk_buff *skb;
u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
@@ -985,18 +1001,17 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
skb_queue_tail(&qca->txq, skb);
hci_uart_tx_wakeup(hu);
- qcadev = serdev_device_get_drvdata(hu->serdev);
-
/* Wait for the baudrate change request to be sent */
while (!skb_queue_empty(&qca->txq))
usleep_range(100, 200);
- serdev_device_wait_until_sent(hu->serdev,
+ if (hu->serdev)
+ serdev_device_wait_until_sent(hu->serdev,
msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
/* Give the controller time to process the request */
- if (qcadev->btsoc_type == QCA_WCN3990)
+ if (qca_soc_type(hu) == QCA_WCN3990)
msleep(10);
else
msleep(300);
@@ -1072,10 +1087,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
static int qca_check_speeds(struct hci_uart *hu)
{
- struct qca_serdev *qcadev;
-
- qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qcadev->btsoc_type == QCA_WCN3990) {
+ if (qca_soc_type(hu) == QCA_WCN3990) {
if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
!qca_get_speed(hu, QCA_OPER_SPEED))
return -EINVAL;
@@ -1091,7 +1103,6 @@ static int qca_check_speeds(struct hci_uart *hu)
static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
{
unsigned int speed, qca_baudrate;
- struct qca_serdev *qcadev;
int ret = 0;
if (speed_type == QCA_INIT_SPEED) {
@@ -1099,6 +1110,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
if (speed)
host_set_baudrate(hu, speed);
} else {
+ enum qca_btsoc_type soc_type = qca_soc_type(hu);
+
speed = qca_get_speed(hu, QCA_OPER_SPEED);
if (!speed)
return 0;
@@ -1106,8 +1119,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
/* Disable flow control for wcn3990 to deassert RTS while
* changing the baudrate of chip and host.
*/
- qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qcadev->btsoc_type == QCA_WCN3990)
+ if (soc_type == QCA_WCN3990)
hci_uart_set_flow_control(hu, true);
qca_baudrate = qca_get_baudrate_value(speed);
@@ -1119,7 +1131,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
host_set_baudrate(hu, speed);
error:
- if (qcadev->btsoc_type == QCA_WCN3990)
+ if (soc_type == QCA_WCN3990)
hci_uart_set_flow_control(hu, false);
}
@@ -1181,12 +1193,10 @@ static int qca_setup(struct hci_uart *hu)
struct hci_dev *hdev = hu->hdev;
struct qca_data *qca = hu->priv;
unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
- struct qca_serdev *qcadev;
+ enum qca_btsoc_type soc_type = qca_soc_type(hu);
int ret;
int soc_ver = 0;
- qcadev = serdev_device_get_drvdata(hu->serdev);
-
ret = qca_check_speeds(hu);
if (ret)
return ret;
@@ -1194,7 +1204,7 @@ static int qca_setup(struct hci_uart *hu)
/* Patch downloading has to be done without IBS mode */
clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
- if (qcadev->btsoc_type == QCA_WCN3990) {
+ if (soc_type == QCA_WCN3990) {
bt_dev_info(hdev, "setting up wcn3990");
/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
@@ -1225,7 +1235,7 @@ static int qca_setup(struct hci_uart *hu)
qca_baudrate = qca_get_baudrate_value(speed);
}
- if (qcadev->btsoc_type != QCA_WCN3990) {
+ if (soc_type != QCA_WCN3990) {
/* Get QCA version information */
ret = qca_read_soc_version(hdev, &soc_ver);
if (ret)
@@ -1234,7 +1244,7 @@ static int qca_setup(struct hci_uart *hu)
bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
/* Setup patch / NVM configurations */
- ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
+ ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver);
if (!ret) {
set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
@@ -1250,7 +1260,7 @@ static int qca_setup(struct hci_uart *hu)
}
/* Setup bdaddr */
- if (qcadev->btsoc_type == QCA_WCN3990)
+ if (soc_type == QCA_WCN3990)
hu->hdev->set_bdaddr = qca_set_bdaddr;
else
hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 97ca105347a6..5685805533b5 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -111,6 +111,18 @@ struct sdio_driver {
extern int sdio_register_driver(struct sdio_driver *);
extern void sdio_unregister_driver(struct sdio_driver *);
+/**
+ * module_sdio_driver() - Helper macro for registering a SDIO driver
+ * @__sdio_driver: sdio_driver struct
+ *
+ * Helper macro for SDIO drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_sdio_driver(__sdio_driver) \
+ module_driver(__sdio_driver, sdio_register_driver, \
+ sdio_unregister_driver)
+
/*
* SDIO I/O operations
*/
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 4332199c71c2..d1a5d5df02f5 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -59,6 +59,8 @@
#define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128
#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134
+#define SDIO_VENDOR_ID_MEDIATEK 0x037a
+
#define SDIO_VENDOR_ID_SIANO 0x039a
#define SDIO_DEVICE_ID_SIANO_NOVA_B0 0x0201
#define SDIO_DEVICE_ID_SIANO_NICE 0x0202
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 094e61e07030..05b1b96f4d9e 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -190,6 +190,9 @@ struct adv_info {
#define HCI_MAX_SHORT_NAME_LENGTH 10
+/* Min encryption key size to match with SMP */
+#define HCI_MIN_ENC_KEY_SIZE 7
+
/* Default LE RPA expiry time, 15 minutes */
#define HCI_DEFAULT_RPA_TIMEOUT (15 * 60)
diff --git a/net/6lowpan/nhc.c b/net/6lowpan/nhc.c
index 4fa2fdda174d..9e56fb98f33c 100644
--- a/net/6lowpan/nhc.c
+++ b/net/6lowpan/nhc.c
@@ -18,7 +18,7 @@
#include "nhc.h"
static struct rb_root rb_root = RB_ROOT;
-static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX];
+static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX + 1];
static DEFINE_SPINLOCK(lowpan_nhc_lock);
static int lowpan_nhc_insert(struct lowpan_nhc *nhc)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index bd4978ce8c45..3cf0764d5793 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1276,6 +1276,14 @@ int hci_conn_check_link_mode(struct hci_conn *conn)
!test_bit(HCI_CONN_ENCRYPT, &conn->flags))
return 0;
+ /* The minimum encryption key size needs to be enforced by the
+ * host stack before establishing any L2CAP connections. The
+ * specification in theory allows a minimum of 1, but to align
+ * BR/EDR and LE transports, a minimum of 7 is chosen.
+ */
+ if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
+ return 0;
+
return 1;
}
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index d6b2540ba7f8..3d9175f130b3 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1460,8 +1460,6 @@ static int hci_dev_do_open(struct hci_dev *hdev)
hdev->set_bdaddr)
ret = hdev->set_bdaddr(hdev,
&hdev->public_addr);
- else
- ret = -EADDRNOTAVAIL;
}
setup_failed:
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 609fd6871c5a..66b631ab0d35 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5433,7 +5433,7 @@ static void hci_le_ext_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
ev->data, ev->length);
}
- ptr += sizeof(*ev) + ev->length + 1;
+ ptr += sizeof(*ev) + ev->length;
}
hci_dev_unlock(hdev);
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 9f85a1943be9..2151913892ce 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -75,6 +75,7 @@ static int do_hidp_sock_ioctl(struct socket *sock, unsigned int cmd, void __user
sockfd_put(csock);
return err;
}
+ ca.name[sizeof(ca.name)-1] = 0;
err = hidp_connection_add(&ca, csock, isock);
if (!err && copy_to_user(argp, &ca, sizeof(ca)))
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index f17e393b43b4..b53acd6c9a3d 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -510,12 +510,12 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
}
EXPORT_SYMBOL_GPL(l2cap_chan_set_defaults);
-static void l2cap_le_flowctl_init(struct l2cap_chan *chan)
+static void l2cap_le_flowctl_init(struct l2cap_chan *chan, u16 tx_credits)
{
chan->sdu = NULL;
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
- chan->tx_credits = 0;
+ chan->tx_credits = tx_credits;
/* Derive MPS from connection MTU to stop HCI fragmentation */
chan->mps = min_t(u16, chan->imtu, chan->conn->mtu - L2CAP_HDR_SIZE);
/* Give enough credits for a full packet */
@@ -1281,7 +1281,7 @@ static void l2cap_le_connect(struct l2cap_chan *chan)
if (test_and_set_bit(FLAG_LE_CONN_REQ_SENT, &chan->flags))
return;
- l2cap_le_flowctl_init(chan);
+ l2cap_le_flowctl_init(chan, 0);
req.psm = chan->psm;
req.scid = cpu_to_le16(chan->scid);
@@ -5532,11 +5532,10 @@ static int l2cap_le_connect_req(struct l2cap_conn *conn,
chan->dcid = scid;
chan->omtu = mtu;
chan->remote_mps = mps;
- chan->tx_credits = __le16_to_cpu(req->credits);
__l2cap_chan_add(conn, chan);
- l2cap_le_flowctl_init(chan);
+ l2cap_le_flowctl_init(chan, __le16_to_cpu(req->credits));
dcid = chan->scid;
credits = chan->rx_credits;
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index dcb14abebeba..a7be8b59b3c2 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -791,10 +791,13 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
conn = chan->conn;
- /*change security for LE channels */
+ /* change security for LE channels */
if (chan->scid == L2CAP_CID_ATT) {
- if (smp_conn_security(conn->hcon, sec.level))
+ if (smp_conn_security(conn->hcon, sec.level)) {
+ err = -EINVAL;
break;
+ }
+
set_bit(FLAG_PENDING_SECURITY, &chan->flags);
sk->sk_state = BT_CONFIG;
chan->state = BT_CONFIG;
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 2457f408d17d..150114e33b20 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -2301,8 +2301,7 @@ static int load_link_keys(struct sock *sk, struct hci_dev *hdev, void *data,
MGMT_STATUS_INVALID_PARAMS);
}
- expected_len = sizeof(*cp) + key_count *
- sizeof(struct mgmt_link_key_info);
+ expected_len = struct_size(cp, keys, key_count);
if (expected_len != len) {
bt_dev_err(hdev, "load_link_keys: expected %u bytes, got %u bytes",
expected_len, len);
@@ -5030,7 +5029,7 @@ static int load_irks(struct sock *sk, struct hci_dev *hdev, void *cp_data,
MGMT_STATUS_INVALID_PARAMS);
}
- expected_len = sizeof(*cp) + irk_count * sizeof(struct mgmt_irk_info);
+ expected_len = struct_size(cp, irks, irk_count);
if (expected_len != len) {
bt_dev_err(hdev, "load_irks: expected %u bytes, got %u bytes",
expected_len, len);
@@ -5112,8 +5111,7 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev,
MGMT_STATUS_INVALID_PARAMS);
}
- expected_len = sizeof(*cp) + key_count *
- sizeof(struct mgmt_ltk_info);
+ expected_len = struct_size(cp, keys, key_count);
if (expected_len != len) {
bt_dev_err(hdev, "load_keys: expected %u bytes, got %u bytes",
expected_len, len);
@@ -5847,8 +5845,7 @@ static int load_conn_param(struct sock *sk, struct hci_dev *hdev, void *data,
MGMT_STATUS_INVALID_PARAMS);
}
- expected_len = sizeof(*cp) + param_count *
- sizeof(struct mgmt_conn_param);
+ expected_len = struct_size(cp, params, param_count);
if (expected_len != len) {
bt_dev_err(hdev, "load_conn_param: expected %u bytes, got %u bytes",
expected_len, len);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 13:30:53 +0000