summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/core/hcd-pci.c200
-rw-r--r--drivers/usb/core/hcd.h4
-rw-r--r--drivers/usb/host/ehci-pci.c2
-rw-r--r--drivers/usb/host/ohci-pci.c2
-rw-r--r--drivers/usb/host/uhci-hcd.c2
5 files changed, 115 insertions, 95 deletions
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 5b87ae7f0a6a..99432785f438 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -191,17 +191,15 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
/**
* usb_hcd_pci_suspend - power management suspend of a PCI-based HCD
* @dev: USB Host Controller being suspended
- * @message: semantics in flux
+ * @message: Power Management message describing this state transition
*
- * Store this function in the HCD's struct pci_driver as suspend().
+ * Store this function in the HCD's struct pci_driver as .suspend.
*/
int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
{
- struct usb_hcd *hcd;
+ struct usb_hcd *hcd = pci_get_drvdata(dev);
int retval = 0;
- int has_pci_pm;
-
- hcd = pci_get_drvdata(dev);
+ int wake, w;
/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
@@ -212,8 +210,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
* otherwise the swsusp will save (and restore) garbage state.
*/
if (!(hcd->state == HC_STATE_SUSPENDED ||
- hcd->state == HC_STATE_HALT))
- return -EBUSY;
+ hcd->state == HC_STATE_HALT)) {
+ dev_warn(&dev->dev, "Root hub is not suspended\n");
+ retval = -EBUSY;
+ goto done;
+ }
+
+ /* We might already be suspended (runtime PM -- not yet written) */
+ if (dev->current_state != PCI_D0)
+ goto done;
if (hcd->driver->pci_suspend) {
retval = hcd->driver->pci_suspend(hcd, message);
@@ -221,49 +226,60 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
if (retval)
goto done;
}
- synchronize_irq(dev->irq);
- /* FIXME until the generic PM interfaces change a lot more, this
- * can't use PCI D1 and D2 states. For example, the confusion
- * between messages and states will need to vanish, and messages
- * will need to provide a target system state again.
- *
- * It'll be important to learn characteristics of the target state,
- * especially on embedded hardware where the HCD will often be in
- * charge of an external VBUS power supply and one or more clocks.
- * Some target system states will leave them active; others won't.
- * (With PCI, that's often handled by platform BIOS code.)
- */
+ synchronize_irq(dev->irq);
- /* even when the PCI layer rejects some of the PCI calls
- * below, HCs can try global suspend and reduce DMA traffic.
- * PM-sensitive HCDs may already have done this.
+ /* Don't fail on error to enable wakeup. We rely on pci code
+ * to reject requests the hardware can't implement, rather
+ * than coding the same thing.
*/
- has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ wake = (hcd->state == HC_STATE_SUSPENDED &&
+ device_may_wakeup(&dev->dev));
+ w = pci_wake_from_d3(dev, wake);
+ if (w < 0)
+ wake = w;
+ dev_dbg(&dev->dev, "wakeup: %d\n", wake);
/* Downstream ports from this root hub should already be quiesced, so
* there will be no DMA activity. Now we can shut down the upstream
* link (except maybe for PME# resume signaling) and enter some PCI
* low power state, if the hardware allows.
*/
- if (hcd->state == HC_STATE_SUSPENDED) {
+ pci_disable_device(dev);
+ done:
+ return retval;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
- /* no DMA or IRQs except when HC is active */
- if (dev->current_state == PCI_D0) {
- pci_save_state(dev);
- pci_disable_device(dev);
- }
+/**
+ * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
+ * @dev: USB Host Controller being suspended
+ * @message: Power Management message describing this state transition
+ *
+ * Store this function in the HCD's struct pci_driver as .suspend_late.
+ */
+int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
+{
+ int retval = 0;
+ int has_pci_pm;
- if (message.event == PM_EVENT_FREEZE ||
- message.event == PM_EVENT_PRETHAW) {
- dev_dbg(hcd->self.controller, "--> no state change\n");
- goto done;
- }
+ /* We might already be suspended (runtime PM -- not yet written) */
+ if (dev->current_state != PCI_D0)
+ goto done;
- if (!has_pci_pm) {
- dev_dbg(hcd->self.controller, "--> PCI D0/legacy\n");
- goto done;
- }
+ pci_save_state(dev);
+
+ /* Don't change state if we don't need to */
+ if (message.event == PM_EVENT_FREEZE ||
+ message.event == PM_EVENT_PRETHAW) {
+ dev_dbg(&dev->dev, "--> no state change\n");
+ goto done;
+ }
+
+ has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!has_pci_pm) {
+ dev_dbg(&dev->dev, "--> PCI D0 legacy\n");
+ } else {
/* NOTE: dev->current_state becomes nonzero only here, and
* only for devices that support PCI PM. Also, exiting
@@ -273,35 +289,16 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
retval = pci_set_power_state(dev, PCI_D3hot);
suspend_report_result(pci_set_power_state, retval);
if (retval == 0) {
- int wake = device_can_wakeup(&hcd->self.root_hub->dev);
-
- wake = wake && device_may_wakeup(hcd->self.controller);
-
- dev_dbg(hcd->self.controller, "--> PCI D3%s\n",
- wake ? "/wakeup" : "");
-
- /* Ignore these return values. We rely on pci code to
- * reject requests the hardware can't implement, rather
- * than coding the same thing.
- */
- (void) pci_enable_wake(dev, PCI_D3hot, wake);
- (void) pci_enable_wake(dev, PCI_D3cold, wake);
+ dev_dbg(&dev->dev, "--> PCI D3\n");
} else {
dev_dbg(&dev->dev, "PCI D3 suspend fail, %d\n",
retval);
- (void) usb_hcd_pci_resume(dev);
+ pci_restore_state(dev);
}
-
- } else if (hcd->state != HC_STATE_HALT) {
- dev_dbg(hcd->self.controller, "hcd state %d; not suspended\n",
- hcd->state);
- WARN_ON(1);
- retval = -EINVAL;
}
-done:
- if (retval == 0) {
#ifdef CONFIG_PPC_PMAC
+ if (retval == 0) {
/* Disable ASIC clocks for USB */
if (machine_is(powermac)) {
struct device_node *of_node;
@@ -311,30 +308,24 @@ done:
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 0);
}
-#endif
}
+#endif
+ done:
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
/**
- * usb_hcd_pci_resume - power management resume of a PCI-based HCD
+ * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
* @dev: USB Host Controller being resumed
*
- * Store this function in the HCD's struct pci_driver as resume().
+ * Store this function in the HCD's struct pci_driver as .resume_early.
*/
-int usb_hcd_pci_resume(struct pci_dev *dev)
+int usb_hcd_pci_resume_early(struct pci_dev *dev)
{
- struct usb_hcd *hcd;
- int retval;
-
- hcd = pci_get_drvdata(dev);
- if (hcd->state != HC_STATE_SUSPENDED) {
- dev_dbg(hcd->self.controller,
- "can't resume, not suspended!\n");
- return 0;
- }
+ int retval = 0;
+ pci_power_t state = dev->current_state;
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
@@ -352,7 +343,7 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
* calls "standby", "suspend to RAM", and so on). There are also
* dirty cases when swsusp fakes a suspend in "shutdown" mode.
*/
- if (dev->current_state != PCI_D0) {
+ if (state != PCI_D0) {
#ifdef DEBUG
int pci_pm;
u16 pmcr;
@@ -364,8 +355,7 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
/* Clean case: power to USB and to HC registers was
* maintained; remote wakeup is easy.
*/
- dev_dbg(hcd->self.controller, "resume from PCI D%d\n",
- pmcr);
+ dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
} else {
/* Clean: HC lost Vcc power, D0 uninitialized
* + Vaux may have preserved port and transceiver
@@ -376,32 +366,55 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
* + after BIOS init
* + after Linux init (HCD statically linked)
*/
- dev_dbg(hcd->self.controller,
- "PCI D0, from previous PCI D%d\n",
- dev->current_state);
+ dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
+ state);
}
#endif
- /* yes, ignore these results too... */
- (void) pci_enable_wake(dev, dev->current_state, 0);
- (void) pci_enable_wake(dev, PCI_D3cold, 0);
+
+ retval = pci_set_power_state(dev, PCI_D0);
} else {
/* Same basic cases: clean (powered/not), dirty */
- dev_dbg(hcd->self.controller, "PCI legacy resume\n");
+ dev_dbg(&dev->dev, "PCI legacy resume\n");
+ }
+
+ if (retval < 0)
+ dev_err(&dev->dev, "can't resume: %d\n", retval);
+ else
+ pci_restore_state(dev);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
+
+/**
+ * usb_hcd_pci_resume - power management resume of a PCI-based HCD
+ * @dev: USB Host Controller being resumed
+ *
+ * Store this function in the HCD's struct pci_driver as .resume.
+ */
+int usb_hcd_pci_resume(struct pci_dev *dev)
+{
+ struct usb_hcd *hcd;
+ int retval;
+
+ hcd = pci_get_drvdata(dev);
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ dev_dbg(hcd->self.controller,
+ "can't resume, not suspended!\n");
+ return 0;
}
- /* NOTE: the PCI API itself is asymmetric here. We don't need to
- * pci_set_power_state(PCI_D0) since that's part of re-enabling;
- * but that won't re-enable bus mastering. Yet pci_disable_device()
- * explicitly disables bus mastering...
- */
retval = pci_enable_device(dev);
if (retval < 0) {
- dev_err(hcd->self.controller,
- "can't re-enable after resume, %d!\n", retval);
+ dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
+ retval);
return retval;
}
+
pci_set_master(dev);
- pci_restore_state(dev);
+
+ /* yes, ignore this result too... */
+ (void) pci_wake_from_d3(dev, 0);
clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
@@ -413,7 +426,6 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
usb_hc_died(hcd);
}
}
-
return retval;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_resume);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index aa5da82d9071..572d2cf46e8d 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -256,7 +256,9 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev,
extern void usb_hcd_pci_remove(struct pci_dev *dev);
#ifdef CONFIG_PM
-extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t state);
+extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
+extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
+extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 36864f958444..6af47a0937b8 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -428,6 +428,8 @@ static struct pci_driver ehci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
+ .suspend_late = usb_hcd_pci_suspend_late,
+ .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
.shutdown = usb_hcd_pci_shutdown,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index a9c2ae36c7ad..8380cc2e961a 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,6 +487,8 @@ static struct pci_driver ohci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
+ .suspend_late = usb_hcd_pci_suspend_late,
+ .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index cf5e4cf7ea42..4e221060f58c 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,6 +942,8 @@ static struct pci_driver uhci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
+ .suspend_late = usb_hcd_pci_suspend_late,
+ .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */
};