summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/multiqueue.txt79
-rw-r--r--drivers/net/Kconfig8
-rw-r--r--drivers/net/cpmac.c14
-rw-r--r--drivers/net/ixgbe/ixgbe_ethtool.c6
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c40
-rw-r--r--drivers/net/s2io.c47
-rw-r--r--include/linux/netdevice.h14
-rw-r--r--include/linux/skbuff.h10
-rw-r--r--net/mac80211/Kconfig3
9 files changed, 9 insertions, 212 deletions
diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt
index ea5a42e8f79f..e6dc1ee9e8f1 100644
--- a/Documentation/networking/multiqueue.txt
+++ b/Documentation/networking/multiqueue.txt
@@ -3,19 +3,11 @@
===========================================
Section 1: Base driver requirements for implementing multiqueue support
-Section 2: Qdisc support for multiqueue devices
-Section 3: Brief howto using PRIO or RR for multiqueue devices
-
Intro: Kernel support for multiqueue devices
---------------------------------------------------------
-Kernel support for multiqueue devices is only an API that is presented to the
-netdevice layer for base drivers to implement. This feature is part of the
-core networking stack, and all network devices will be running on the
-multiqueue-aware stack. If a base driver only has one queue, then these
-changes are transparent to that driver.
-
+Kernel support for multiqueue devices is always present.
Section 1: Base driver requirements for implementing multiqueue support
-----------------------------------------------------------------------
@@ -43,73 +35,4 @@ bitmap on device initialization. Below is an example from e1000:
netdev->features |= NETIF_F_MULTI_QUEUE;
#endif
-
-Section 2: Qdisc support for multiqueue devices
------------------------------------------------
-
-Currently two qdiscs support multiqueue devices. A new round-robin qdisc,
-sch_rr, and sch_prio. The qdisc is responsible for classifying the skb's to
-bands and queues, and will store the queue mapping into skb->queue_mapping.
-Use this field in the base driver to determine which queue to send the skb
-to.
-
-sch_rr has been added for hardware that doesn't want scheduling policies from
-software, so it's a straight round-robin qdisc. It uses the same syntax and
-classification priomap that sch_prio uses, so it should be intuitive to
-configure for people who've used sch_prio.
-
-In order to utilitize the multiqueue features of the qdiscs, the network
-device layer needs to enable multiple queue support. This can be done by
-selecting NETDEVICES_MULTIQUEUE under Drivers.
-
-The PRIO qdisc naturally plugs into a multiqueue device. If
-NETDEVICES_MULTIQUEUE is selected, then on qdisc load, the number of
-bands requested is compared to the number of queues on the hardware. If they
-are equal, it sets a one-to-one mapping up between the queues and bands. If
-they're not equal, it will not load the qdisc. This is the same behavior
-for RR. Once the association is made, any skb that is classified will have
-skb->queue_mapping set, which will allow the driver to properly queue skb's
-to multiple queues.
-
-
-Section 3: Brief howto using PRIO and RR for multiqueue devices
----------------------------------------------------------------
-
-The userspace command 'tc,' part of the iproute2 package, is used to configure
-qdiscs. To add the PRIO qdisc to your network device, assuming the device is
-called eth0, run the following command:
-
-# tc qdisc add dev eth0 root handle 1: prio bands 4 multiqueue
-
-This will create 4 bands, 0 being highest priority, and associate those bands
-to the queues on your NIC. Assuming eth0 has 4 Tx queues, the band mapping
-would look like:
-
-band 0 => queue 0
-band 1 => queue 1
-band 2 => queue 2
-band 3 => queue 3
-
-Traffic will begin flowing through each queue if your TOS values are assigning
-traffic across the various bands. For example, ssh traffic will always try to
-go out band 0 based on TOS -> Linux priority conversion (realtime traffic),
-so it will be sent out queue 0. ICMP traffic (pings) fall into the "normal"
-traffic classification, which is band 1. Therefore pings will be send out
-queue 1 on the NIC.
-
-Note the use of the multiqueue keyword. This is only in versions of iproute2
-that support multiqueue networking devices; if this is omitted when loading
-a qdisc onto a multiqueue device, the qdisc will load and operate the same
-if it were loaded onto a single-queue device (i.e. - sends all traffic to
-queue 0).
-
-Another alternative to multiqueue band allocation can be done by using the
-multiqueue option and specify 0 bands. If this is the case, the qdisc will
-allocate the number of bands to equal the number of queues that the device
-reports, and bring the qdisc online.
-
-The behavior of tc filters remains the same, where it will override TOS priority
-classification.
-
-
Author: Peter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ef733abc857d..4675c1bd6fb9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -26,14 +26,6 @@ menuconfig NETDEVICES
# that for each of the symbols.
if NETDEVICES
-config NETDEVICES_MULTIQUEUE
- bool "Netdevice multiple hardware queue support"
- ---help---
- Say Y here if you want to allow the network stack to use multiple
- hardware TX queues on an ethernet device.
-
- Most people will say N here.
-
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 7f3f62e1b113..d630e2a72f42 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -569,11 +569,7 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
len = max(skb->len, ETH_ZLEN);
queue = skb_get_queue_mapping(skb);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netif_stop_subqueue(dev, queue);
-#else
- netif_stop_queue(dev);
-#endif
desc = &priv->desc_ring[queue];
if (unlikely(desc->dataflags & CPMAC_OWN)) {
@@ -626,24 +622,14 @@ static void cpmac_end_xmit(struct net_device *dev, int queue)
dev_kfree_skb_irq(desc->skb);
desc->skb = NULL;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (netif_subqueue_stopped(dev, queue))
netif_wake_subqueue(dev, queue);
-#else
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
-#endif
} else {
if (netif_msg_tx_err(priv) && net_ratelimit())
printk(KERN_WARNING
"%s: end_xmit: spurious interrupt\n", dev->name);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (netif_subqueue_stopped(dev, queue))
netif_wake_subqueue(dev, queue);
-#else
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
-#endif
}
}
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 12990b1fe7e4..81b769093d22 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -252,21 +252,15 @@ static int ixgbe_set_tso(struct net_device *netdev, u32 data)
netdev->features |= NETIF_F_TSO;
netdev->features |= NETIF_F_TSO6;
} else {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int i;
-#endif
netif_stop_queue(netdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
for (i = 0; i < adapter->num_tx_queues; i++)
netif_stop_subqueue(netdev, i);
-#endif
netdev->features &= ~NETIF_F_TSO;
netdev->features &= ~NETIF_F_TSO6;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
for (i = 0; i < adapter->num_tx_queues; i++)
netif_start_subqueue(netdev, i);
-#endif
netif_start_queue(netdev);
}
return 0;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b37d618d8e2a..10a1c8c5cda1 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -266,28 +266,16 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
* sees the new next_to_clean.
*/
smp_mb();
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
!test_bit(__IXGBE_DOWN, &adapter->state)) {
netif_wake_subqueue(netdev, tx_ring->queue_index);
adapter->restart_queue++;
}
-#else
- if (netif_queue_stopped(netdev) &&
- !test_bit(__IXGBE_DOWN, &adapter->state)) {
- netif_wake_queue(netdev);
- adapter->restart_queue++;
- }
-#endif
}
if (adapter->detect_tx_hung)
if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc))
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netif_stop_subqueue(netdev, tx_ring->queue_index);
-#else
- netif_stop_queue(netdev);
-#endif
if (total_tx_packets >= tx_ring->work_limit)
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value);
@@ -2192,11 +2180,7 @@ static void __devinit ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
case (IXGBE_FLAG_RSS_ENABLED):
rss_m = 0xF;
nrq = rss_i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
ntq = rss_i;
-#else
- ntq = 1;
-#endif
break;
case 0:
default:
@@ -2370,10 +2354,8 @@ try_msi:
}
out:
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
/* Notify the stack of the (possibly) reduced Tx Queue count. */
adapter->netdev->egress_subqueue_count = adapter->num_tx_queues;
-#endif
return err;
}
@@ -2910,9 +2892,7 @@ static void ixgbe_watchdog(unsigned long data)
struct net_device *netdev = adapter->netdev;
bool link_up;
u32 link_speed = 0;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
int i;
-#endif
adapter->hw.mac.ops.check_link(&adapter->hw, &(link_speed), &link_up);
@@ -2934,10 +2914,8 @@ static void ixgbe_watchdog(unsigned long data)
netif_carrier_on(netdev);
netif_wake_queue(netdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
for (i = 0; i < adapter->num_tx_queues; i++)
netif_wake_subqueue(netdev, i);
-#endif
} else {
/* Force detection of hung controller */
adapter->detect_tx_hung = true;
@@ -3264,11 +3242,7 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netif_stop_subqueue(netdev, tx_ring->queue_index);
-#else
- netif_stop_queue(netdev);
-#endif
/* Herbert's original patch had:
* smp_mb__after_netif_stop_queue();
* but since that doesn't exist yet, just open code it. */
@@ -3280,11 +3254,7 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
return -EBUSY;
/* A reprieve! - use start_queue because it doesn't call schedule */
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netif_wake_subqueue(netdev, tx_ring->queue_index);
-#else
- netif_wake_queue(netdev);
-#endif
++adapter->restart_queue;
return 0;
}
@@ -3312,9 +3282,7 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int f;
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
len -= skb->data_len;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping;
-#endif
tx_ring = &adapter->tx_ring[r_idx];
@@ -3502,11 +3470,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
pci_set_master(pdev);
pci_save_state(pdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES);
-#else
- netdev = alloc_etherdev(sizeof(struct ixgbe_adapter));
-#endif
if (!netdev) {
err = -ENOMEM;
goto err_alloc_etherdev;
@@ -3598,9 +3562,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netdev->features |= NETIF_F_MULTI_QUEUE;
-#endif
/* make sure the EEPROM is good */
if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) {
@@ -3668,10 +3630,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netif_carrier_off(netdev);
netif_stop_queue(netdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
for (i = 0; i < adapter->num_tx_queues; i++)
netif_stop_subqueue(netdev, i);
-#endif
ixgbe_napi_add_all(adapter);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index e7a3dbec674c..51a91154125d 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -546,13 +546,10 @@ static struct pci_driver s2io_driver = {
static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
{
int i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (sp->config.multiq) {
for (i = 0; i < sp->config.tx_fifo_num; i++)
netif_stop_subqueue(sp->dev, i);
- } else
-#endif
- {
+ } else {
for (i = 0; i < sp->config.tx_fifo_num; i++)
sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
netif_stop_queue(sp->dev);
@@ -561,12 +558,9 @@ static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (sp->config.multiq)
netif_stop_subqueue(sp->dev, fifo_no);
- else
-#endif
- {
+ else {
sp->mac_control.fifos[fifo_no].queue_state =
FIFO_QUEUE_STOP;
netif_stop_queue(sp->dev);
@@ -576,13 +570,10 @@ static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
{
int i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (sp->config.multiq) {
for (i = 0; i < sp->config.tx_fifo_num; i++)
netif_start_subqueue(sp->dev, i);
- } else
-#endif
- {
+ } else {
for (i = 0; i < sp->config.tx_fifo_num; i++)
sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
netif_start_queue(sp->dev);
@@ -591,12 +582,9 @@ static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (sp->config.multiq)
netif_start_subqueue(sp->dev, fifo_no);
- else
-#endif
- {
+ else {
sp->mac_control.fifos[fifo_no].queue_state =
FIFO_QUEUE_START;
netif_start_queue(sp->dev);
@@ -606,13 +594,10 @@ static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
{
int i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (sp->config.multiq) {
for (i = 0; i < sp->config.tx_fifo_num; i++)
netif_wake_subqueue(sp->dev, i);
- } else
-#endif
- {
+ } else {
for (i = 0; i < sp->config.tx_fifo_num; i++)
sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
netif_wake_queue(sp->dev);
@@ -623,13 +608,10 @@ static inline void s2io_wake_tx_queue(
struct fifo_info *fifo, int cnt, u8 multiq)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (multiq) {
if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
netif_wake_subqueue(fifo->dev, fifo->fifo_no);
- } else
-#endif
- if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
+ } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
if (netif_queue_stopped(fifo->dev)) {
fifo->queue_state = FIFO_QUEUE_START;
netif_wake_queue(fifo->dev);
@@ -4189,15 +4171,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_LOCKED;
}
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (sp->config.multiq) {
if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
spin_unlock_irqrestore(&fifo->tx_lock, flags);
return NETDEV_TX_BUSY;
}
- } else
-#endif
- if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
+ } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
if (netif_queue_stopped(dev)) {
spin_unlock_irqrestore(&fifo->tx_lock, flags);
return NETDEV_TX_BUSY;
@@ -7633,12 +7612,6 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
DBG_PRINT(ERR_DBG, "tx fifos\n");
}
-#ifndef CONFIG_NETDEVICES_MULTIQUEUE
- if (multiq) {
- DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n");
- multiq = 0;
- }
-#endif
if (multiq)
*dev_multiq = multiq;
@@ -7783,12 +7756,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
pci_disable_device(pdev);
return -ENODEV;
}
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (dev_multiq)
dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
else
-#endif
- dev = alloc_etherdev(sizeof(struct s2io_nic));
+ dev = alloc_etherdev(sizeof(struct s2io_nic));
if (dev == NULL) {
DBG_PRINT(ERR_DBG, "Device allocation failed\n");
pci_disable_device(pdev);
@@ -7979,10 +7950,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
dev->features |= NETIF_F_UFO;
dev->features |= NETIF_F_HW_CSUM;
}
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
if (config->multiq)
dev->features |= NETIF_F_MULTI_QUEUE;
-#endif
dev->tx_timeout = &s2io_tx_watchdog;
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index c8d5f128858d..e2d931f9b700 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1043,9 +1043,7 @@ static inline int netif_running(const struct net_device *dev)
*/
static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
clear_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
-#endif
}
/**
@@ -1057,13 +1055,11 @@ static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
*/
static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
#ifdef CONFIG_NETPOLL_TRAP
if (netpoll_trap())
return;
#endif
set_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
-#endif
}
/**
@@ -1076,12 +1072,8 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
static inline int __netif_subqueue_stopped(const struct net_device *dev,
u16 queue_index)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
return test_bit(__LINK_STATE_XOFF,
&dev->egress_subqueue[queue_index].state);
-#else
- return 0;
-#endif
}
static inline int netif_subqueue_stopped(const struct net_device *dev,
@@ -1099,7 +1091,6 @@ static inline int netif_subqueue_stopped(const struct net_device *dev,
*/
static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
#ifdef CONFIG_NETPOLL_TRAP
if (netpoll_trap())
return;
@@ -1107,7 +1098,6 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
if (test_and_clear_bit(__LINK_STATE_XOFF,
&dev->egress_subqueue[queue_index].state))
__netif_schedule(&dev->tx_queue);
-#endif
}
/**
@@ -1119,11 +1109,7 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
*/
static inline int netif_is_multiqueue(const struct net_device *dev)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
return (!!(NETIF_F_MULTI_QUEUE & dev->features));
-#else
- return 0;
-#endif
}
/* Use this variant when it is known for sure that it
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 2220b9e2dab0..8f10e3d08fd9 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -305,9 +305,7 @@ struct sk_buff {
#endif
int iif;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
__u16 queue_mapping;
-#endif
#ifdef CONFIG_NET_SCHED
__u16 tc_index; /* traffic control index */
#ifdef CONFIG_NET_CLS_ACT
@@ -1671,25 +1669,17 @@ static inline void skb_init_secmark(struct sk_buff *skb)
static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
skb->queue_mapping = queue_mapping;
-#endif
}
static inline u16 skb_get_queue_mapping(struct sk_buff *skb)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
return skb->queue_mapping;
-#else
- return 0;
-#endif
}
static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
to->queue_mapping = from->queue_mapping;
-#endif
}
static inline int skb_is_gso(const struct sk_buff *skb)
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 40f1add17753..d2038418e2bd 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -15,14 +15,11 @@ config MAC80211_QOS
def_bool y
depends on MAC80211
depends on NET_SCHED
- depends on NETDEVICES_MULTIQUEUE
comment "QoS/HT support disabled"
depends on MAC80211 && !MAC80211_QOS
comment "QoS/HT support needs CONFIG_NET_SCHED"
depends on MAC80211 && !NET_SCHED
-comment "QoS/HT support needs CONFIG_NETDEVICES_MULTIQUEUE"
- depends on MAC80211 && !NETDEVICES_MULTIQUEUE
menu "Rate control algorithm selection"
depends on MAC80211 != n