summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/ltc297857
-rw-r--r--drivers/hwmon/pmbus/Kconfig4
-rw-r--r--drivers/hwmon/pmbus/ltc2978.c137
3 files changed, 168 insertions, 30 deletions
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index 499129e11897..c365f9beb5dd 100644
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -6,6 +6,10 @@ Supported chips:
Prefix: 'ltc2978'
Addresses scanned: -
Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
+ * Linear Technology LTC3880
+ Prefix: 'ltc3880'
+ Addresses scanned: -
+ Datasheet: http://cds.linear.com/docs/Datasheet/3880f.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
@@ -14,7 +18,8 @@ Description
-----------
The LTC2978 is an octal power supply monitor, supervisor, sequencer and
-margin controller.
+margin controller. The LTC3880 is a dual, PolyPhase DC/DC synchronous
+step-down switching regulator controller.
Usage Notes
@@ -43,12 +48,12 @@ in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
in1_lcrit_alarm Input voltage critical low alarm.
in1_crit_alarm Input voltage critical high alarm.
-in1_lowest Lowest input voltage.
+in1_lowest Lowest input voltage. LTC2978 only.
in1_highest Highest input voltage.
in1_reset_history Reset history. Writing into this attribute will reset
history for all attributes.
-in[2-9]_label "vout[1-8]".
+in[2-9]_label "vout[1-8]". Channels 3 to 9 on LTC2978 only.
in[2-9]_input Measured output voltage.
in[2-9]_min Minimum output voltage.
in[2-9]_max Maximum output voltage.
@@ -58,21 +63,41 @@ in[2-9]_min_alarm Output voltage low alarm.
in[2-9]_max_alarm Output voltage high alarm.
in[2-9]_lcrit_alarm Output voltage critical low alarm.
in[2-9]_crit_alarm Output voltage critical high alarm.
-in[2-9]_lowest Lowest output voltage.
+in[2-9]_lowest Lowest output voltage. LTC2978 only.
in[2-9]_highest Lowest output voltage.
in[2-9]_reset_history Reset history. Writing into this attribute will reset
history for all attributes.
-temp1_input Measured temperature.
-temp1_min Mimimum temperature.
-temp1_max Maximum temperature.
-temp1_lcrit Critical low temperature.
-temp1_crit Critical high temperature.
-temp1_min_alarm Chip temperature low alarm.
-temp1_max_alarm Chip temperature high alarm.
-temp1_lcrit_alarm Chip temperature critical low alarm.
-temp1_crit_alarm Chip temperature critical high alarm.
-temp1_lowest Lowest measured temperature.
-temp1_highest Highest measured temperature.
-temp1_reset_history Reset history. Writing into this attribute will reset
+temp[1-3]_input Measured temperature.
+ On LTC2978, only one temperature measurement is
+ supported and reflects the internal temperature.
+ On LTC3880, temp1 and temp2 report external
+ temperatures, and temp3 reports the internal
+ temperature.
+temp[1-3]_min Mimimum temperature.
+temp[1-3]_max Maximum temperature.
+temp[1-3]_lcrit Critical low temperature.
+temp[1-3]_crit Critical high temperature.
+temp[1-3]_min_alarm Chip temperature low alarm.
+temp[1-3]_max_alarm Chip temperature high alarm.
+temp[1-3]_lcrit_alarm Chip temperature critical low alarm.
+temp[1-3]_crit_alarm Chip temperature critical high alarm.
+temp[1-3]_lowest Lowest measured temperature. LTC2978 only.
+temp[1-3]_highest Highest measured temperature.
+temp[1-3]_reset_history Reset history. Writing into this attribute will reset
history for all attributes.
+
+power[1-2]_label "pout[1-2]". LTC3880 only.
+power[1-2]_input Measured power.
+
+curr1_label "iin". LTC3880 only.
+curr1_input Measured input current.
+curr1_max Maximum input current.
+curr1_max_alarm Input current high alarm.
+
+curr[2-3]_label "iout[1-2]". LTC3880 only.
+curr[2-3]_input Measured input current.
+curr[2-3]_max Maximum input current.
+curr[2-3]_crit Critical input current.
+curr[2-3]_max_alarm Input current high alarm.
+curr[2-3]_crit_alarm Input current critical high alarm.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index c4dcdca25555..4b26f51920ba 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -47,11 +47,11 @@ config SENSORS_LM25066
be called lm25066.
config SENSORS_LTC2978
- tristate "Linear Technologies LTC2978"
+ tristate "Linear Technologies LTC2978 and LTC3880"
default n
help
If you say yes here you get hardware monitoring support for Linear
- Technology LTC2978.
+ Technology LTC2978 and LTC3880.
This driver can also be built as a module. If so, the module will
be called ltc2978.
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index 02b2e49adb31..820fff48910b 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -1,5 +1,5 @@
/*
- * Hardware monitoring driver for LTC2978
+ * Hardware monitoring driver for LTC2978 and LTC3880
*
* Copyright (c) 2011 Ericsson AB.
*
@@ -26,19 +26,28 @@
#include <linux/i2c.h>
#include "pmbus.h"
-enum chips { ltc2978 };
+enum chips { ltc2978, ltc3880 };
+/* LTC2978 and LTC3880 */
#define LTC2978_MFR_VOUT_PEAK 0xdd
#define LTC2978_MFR_VIN_PEAK 0xde
#define LTC2978_MFR_TEMPERATURE_PEAK 0xdf
#define LTC2978_MFR_SPECIAL_ID 0xe7
+/* LTC2978 only */
#define LTC2978_MFR_VOUT_MIN 0xfb
#define LTC2978_MFR_VIN_MIN 0xfc
#define LTC2978_MFR_TEMPERATURE_MIN 0xfd
+/* LTC3880 only */
+#define LTC3880_MFR_IOUT_PEAK 0xd7
+#define LTC3880_MFR_CLEAR_PEAKS 0xe3
+#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
+
#define LTC2978_ID_REV1 0x0121
#define LTC2978_ID_REV2 0x0122
+#define LTC3880_ID 0x4000
+#define LTC3880_ID_MASK 0xff00
/*
* LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
@@ -52,6 +61,8 @@ struct ltc2978_data {
int vin_min, vin_max;
int temp_min, temp_max;
int vout_min[8], vout_max[8];
+ int iout_max[2];
+ int temp2_max[2];
struct pmbus_driver_info info;
};
@@ -70,7 +81,8 @@ static inline int lin11_to_val(int data)
return (e < 0 ? m >> -e : m << e);
}
-static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
+static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
+ int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct ltc2978_data *data = to_ltc2978_data(info);
@@ -106,6 +118,25 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
ret = data->temp_max;
}
break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
case PMBUS_VIRT_READ_VIN_MIN:
ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_MIN);
if (ret >= 0) {
@@ -140,18 +171,74 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
ret = data->temp_min;
}
break;
- case PMBUS_VIRT_RESET_VOUT_HISTORY:
- case PMBUS_VIRT_RESET_VIN_HISTORY:
- case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_READ_TEMP2_MAX:
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ ret = -ENXIO;
+ break;
+ default:
+ ret = ltc2978_read_word_data_common(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3880_MFR_IOUT_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->iout_max[page]))
+ data->iout_max[page] = ret;
+ ret = data->iout_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP2_MAX:
+ ret = pmbus_read_word_data(client, page,
+ LTC3880_MFR_TEMPERATURE2_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->temp2_max[page]))
+ data->temp2_max[page] = ret;
+ ret = data->temp2_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_VIN_MIN:
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ case PMBUS_VIRT_READ_TEMP_MIN:
+ ret = -ENXIO;
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
ret = 0;
break;
default:
- ret = -ENODATA;
+ ret = ltc2978_read_word_data_common(client, page, reg);
break;
}
return ret;
}
+static int ltc2978_clear_peaks(struct i2c_client *client, int page,
+ enum chips id)
+{
+ int ret;
+
+ if (id == ltc2978)
+ ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ else
+ ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
+
+ return ret;
+}
+
static int ltc2978_write_word_data(struct i2c_client *client, int page,
int reg, u16 word)
{
@@ -160,20 +247,28 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
int ret;
switch (reg) {
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ data->iout_max[page] = 0x7fff;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ data->temp2_max[page] = 0x7fff;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
data->vout_min[page] = 0xffff;
data->vout_max[page] = 0;
- ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ ret = ltc2978_clear_peaks(client, page, data->id);
break;
case PMBUS_VIRT_RESET_VIN_HISTORY:
data->vin_min = 0x7bff;
data->vin_max = 0;
- ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ ret = ltc2978_clear_peaks(client, page, data->id);
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
data->temp_min = 0x7bff;
data->temp_max = 0x7fff;
- ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ ret = ltc2978_clear_peaks(client, page, data->id);
break;
default:
ret = -ENODATA;
@@ -184,6 +279,7 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
static const struct i2c_device_id ltc2978_id[] = {
{"ltc2978", ltc2978},
+ {"ltc3880", ltc3880},
{}
};
MODULE_DEVICE_TABLE(i2c, ltc2978_id);
@@ -211,6 +307,8 @@ static int ltc2978_probe(struct i2c_client *client,
if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) {
data->id = ltc2978;
+ } else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) {
+ data->id = ltc3880;
} else {
dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
ret = -ENODEV;
@@ -223,7 +321,6 @@ static int ltc2978_probe(struct i2c_client *client,
ltc2978_id[data->id].name);
info = &data->info;
- info->read_word_data = ltc2978_read_word_data;
info->write_word_data = ltc2978_write_word_data;
data->vout_min[0] = 0xffff;
@@ -233,6 +330,7 @@ static int ltc2978_probe(struct i2c_client *client,
switch (id->driver_data) {
case ltc2978:
+ info->read_word_data = ltc2978_read_word_data;
info->pages = 8;
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
@@ -243,6 +341,21 @@ static int ltc2978_probe(struct i2c_client *client,
data->vout_min[i] = 0xffff;
}
break;
+ case ltc3880:
+ info->read_word_data = ltc3880_read_word_data;
+ info->pages = 2;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+ info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ data->vout_min[1] = 0xffff;
+ break;
default:
ret = -ENODEV;
goto err_mem;
@@ -289,7 +402,7 @@ static void __exit ltc2978_exit(void)
}
MODULE_AUTHOR("Guenter Roeck");
-MODULE_DESCRIPTION("PMBus driver for LTC2978");
+MODULE_DESCRIPTION("PMBus driver for LTC2978 and LTC3880");
MODULE_LICENSE("GPL");
module_init(ltc2978_init);
module_exit(ltc2978_exit);