diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/cdns,macb.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/cdns,macb.yaml | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 8dd06db34169..6cd3d853dcba 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -81,6 +81,25 @@ properties: phy-handle: true + phys: + maxItems: 1 + + phy-names: + const: sgmii-phy + description: + Required with ZynqMP SoC when in SGMII mode. + Should reference PS-GTR generic PHY device for this controller + instance. See ZynqMP example. + + resets: + maxItems: 1 + description: + Recommended with ZynqMP, specify reset control for this + controller instance with zynqmp-reset driver. + + reset-names: + maxItems: 1 + fixed-link: true iommus: @@ -157,3 +176,40 @@ examples: reset-gpios = <&pioE 6 1>; }; }; + + - | + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + #include <dt-bindings/power/xlnx-zynqmp-power.h> + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + #include <dt-bindings/phy/phy.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + gem1: ethernet@ff0c0000 { + compatible = "cdns,zynqmp-gem", "cdns,gem"; + interrupt-parent = <&gic>; + interrupts = <0 59 4>, <0 59 4>; + reg = <0x0 0xff0c0000 0x0 0x1000>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; + #address-cells = <1>; + #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x875>; + power-domains = <&zynqmp_firmware PD_ETH_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; + reset-names = "gem1_rst"; + status = "okay"; + phy-mode = "sgmii"; + phy-names = "sgmii-phy"; + phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; |