diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/ti,dp83822.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/ti,dp83822.yaml | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml index db74474207ed..784866ea392b 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -62,6 +62,40 @@ properties: for the PHY. The internal delay for the PHY is fixed to 3.5ns relative to transmit data. + ti,cfg-dac-minus-one-bp: + description: | + DP83826 PHY only. + Sets the voltage ratio (with respect to the nominal value) + of the logical level -1 for the MLT-3 encoded TX data. + enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000, + 10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000] + default: 10000 + + ti,cfg-dac-plus-one-bp: + description: | + DP83826 PHY only. + Sets the voltage ratio (with respect to the nominal value) + of the logical level +1 for the MLT-3 encoded TX data. + enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000, + 10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000] + default: 10000 + + ti,rmii-mode: + description: | + If present, select the RMII operation mode. Two modes are + available: + - RMII master, where the PHY outputs a 50MHz reference clock which can + be connected to the MAC. + - RMII slave, where the PHY expects a 50MHz reference clock input + shared with the MAC. + The RMII operation mode can also be configured by its straps. + If the strap pin is not set correctly or not set at all, then this can be + used to configure it. + $ref: /schemas/types.yaml#/definitions/string + enum: + - master + - slave + required: - reg |