diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
66 files changed, 1229 insertions, 430 deletions
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml index 5c223cb063d4..f7d578a171a4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - mediatek,mt7622-wed + - mediatek,mt7981-wed - mediatek,mt7986-wed - const: syscon diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt deleted file mode 100644 index d2c24c277514..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt +++ /dev/null @@ -1,27 +0,0 @@ -MediaTek SGMIISYS controller -============================ - -The MediaTek SGMIISYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt7622-sgmiisys", "syscon" - - "mediatek,mt7629-sgmiisys", "syscon" - - "mediatek,mt7981-sgmiisys_0", "syscon" - - "mediatek,mt7981-sgmiisys_1", "syscon" - - "mediatek,mt7986-sgmiisys_0", "syscon" - - "mediatek,mt7986-sgmiisys_1", "syscon" -- #clock-cells: Must be 1 - -The SGMIISYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -sgmiisys: sgmiisys@1b128000 { - compatible = "mediatek,mt7622-sgmiisys", "syscon"; - reg = <0 0x1b128000 0 0x1000>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index b2b156cc160a..ad8e51aa01b0 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -20,6 +20,7 @@ properties: - st,stm32-syscfg - st,stm32-power-config - st,stm32-tamp + - st,stm32f4-gcan - const: syscon - items: - const: st,stm32-tamp @@ -42,6 +43,7 @@ if: contains: enum: - st,stm32mp157-syscfg + - st,stm32f4-gcan then: required: - clocks diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml index d30fada2ac39..5718ab4654b2 100644 --- a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml +++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml @@ -16,7 +16,7 @@ description: | operation modes at 10/100 Mb/s data transfer rates. allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml index 987b91b9afe9..eb26623dab51 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A10 EMAC Ethernet Controller allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml index ede977cdfb8d..85f552b907f3 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml @@ -11,7 +11,7 @@ maintainers: - Maxime Ripard <mripard@kernel.org> allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# # Select every compatible, including the deprecated ones. This way, we # will be able to report a warning when we have that compatible, since diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml index 8d1d94494349..9d02af468906 100644 --- a/Documentation/devicetree/bindings/net/altr,tse.yaml +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -66,7 +66,7 @@ required: - tx-fifo-depth allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index ddd5a073c3a8..a2c51a84efa5 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson DWMAC Ethernet controller diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index f81eda8cb0a5..d6ef468495c5 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -15,7 +15,7 @@ description: |+ MAC. allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml new file mode 100644 index 000000000000..57e4c87cb00b --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/nxp,88w8987-bt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Bluetooth chips + +description: + This binding describes UART-attached NXP bluetooth chips. These chips + are dual-radio chips supporting WiFi and Bluetooth. The bluetooth + works on standard H4 protocol over 4-wire UART. The RTS and CTS lines + are used during FW download. To enable power save mode, the host + asserts break signal over UART-TX line to put the chip into power save + state. De-asserting break wakes up the BT chip. + +maintainers: + - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> + +properties: + compatible: + enum: + - nxp,88w8987-bt + - nxp,88w8997-bt + + fw-init-baudrate: + description: + Chip baudrate after FW is downloaded and initialized. + This property depends on the module vendor's + configuration. If this property is not specified, + 115200 is set as default. + +required: + - compatible + +additionalProperties: false + +examples: + - | + serial { + bluetooth { + compatible = "nxp,88w8987-bt"; + fw-init-baudrate = <3000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index a6a6b0e4df7a..68f78b90d23a 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -23,6 +23,7 @@ properties: - qcom,wcn3998-bt - qcom,qca6390-bt - qcom,wcn6750-bt + - qcom,wcn6855-bt enable-gpios: maxItems: 1 @@ -133,6 +134,22 @@ allOf: - vddrfa1p7-supply - vddrfa1p2-supply - vddasd-supply + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6855-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddbtcxmx-supply + - vddrfacmn-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p7-supply examples: - | diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml index ee2eac8f5710..210fb29c4e7b 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.yaml +++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml @@ -10,7 +10,7 @@ maintainers: - Florian Fainelli <f.fainelli@gmail.com> allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml index 5fc9c9fafd85..b40006d44791 100644 --- a/Documentation/devicetree/bindings/net/brcm,systemport.yaml +++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml @@ -66,7 +66,7 @@ required: - phy-mode allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml index b964c7dcec15..cc70b00c6ce5 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -121,7 +121,7 @@ required: - compatible dependencies: - brcm,requires-autobaud-mode: [ 'shutdown-gpios' ] + brcm,requires-autobaud-mode: [ shutdown-gpios ] if: not: diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 6e59bd2a6094..4162469c3c08 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -63,6 +63,9 @@ properties: boot loader. This property should only be used the used operating system doesn't support the clocks and clock-names property. + power-domains: + maxItems: 1 + xceiver-supply: description: Regulator that powers the CAN transceiver. diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml new file mode 100644 index 000000000000..769fa5c27b76 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics bxCAN controller + +description: STMicroelectronics BxCAN controller for CAN bus + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + enum: + - st,stm32f4-bxcan + + st,can-primary: + description: + Primary and secondary mode of the bxCAN peripheral is only relevant + if the chip has two CAN peripherals. In that case they share some + of the required logic. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms master/slave instead of primary/secondary. + type: boolean + + reg: + maxItems: 1 + + interrupts: + items: + - description: transmit interrupt + - description: FIFO 0 receive interrupt + - description: FIFO 1 receive interrupt + - description: status change error interrupt + + interrupt-names: + items: + - const: tx + - const: rx0 + - const: rx1 + - const: sce + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + st,gcan: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + The phandle to the gcan node which allows to access the 512-bytes + SRAM memory shared by the two bxCAN cells (CAN1 primary and CAN2 + secondary) in dual CAN peripheral configuration. + +required: + - compatible + - reg + - interrupts + - resets + - clocks + - st,gcan + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32fx-clock.h> + #include <dt-bindings/mfd/stm32f4-rcc.h> + + can1: can@40006400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006400 0x200>; + interrupts = <19>, <20>, <21>, <22>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F4_APB1_RESET(CAN1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>; + st,can-primary; + st,gcan = <&gcan>; + }; diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml index 65af8183cb9c..897d2cbda45b 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml @@ -35,15 +35,15 @@ properties: maxItems: 1 tx-fifo-depth: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: CAN Tx fifo depth (Zynq, Axi CAN). rx-fifo-depth: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode) tx-mailbox-count: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: CAN Tx mailbox buffer count (CAN FD) required: diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml index 5bef4128d175..4c78c546343f 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -19,6 +19,7 @@ properties: - const: brcm,bcm53115 - const: brcm,bcm53125 - const: brcm,bcm53128 + - const: brcm,bcm53134 - const: brcm,bcm5365 - const: brcm,bcm5395 - const: brcm,bcm5389 @@ -57,8 +58,11 @@ properties: - items: - enum: - brcm,bcm3384-switch + - brcm,bcm6318-switch - brcm,bcm6328-switch + - brcm,bcm6362-switch - brcm,bcm6368-switch + - brcm,bcm63268-switch - const: brcm,bcm63xx-switch required: diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml index eed16e216fb6..c745407f2f68 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -76,12 +76,6 @@ properties: supports reporting the number of packets in-flight in a switch queue type: boolean - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - ports: type: object @@ -99,11 +93,9 @@ properties: required: - reg - interrupts - - "#address-cells" - - "#size-cells" allOf: - - $ref: "dsa.yaml#" + - $ref: dsa.yaml# - if: properties: compatible: @@ -145,8 +137,6 @@ examples: - | switch@f0b00000 { compatible = "brcm,bcm7445-switch-v4.0"; - #address-cells = <1>; - #size-cells = <0>; reg = <0xf0b00000 0x40000>, <0xf0b40000 0x110>, <0xf0b40340 0x30>, diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index 449ee0735012..e532c6b795f4 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -11,16 +11,23 @@ maintainers: - Landen Chao <Landen.Chao@mediatek.com> - DENG Qingfang <dqfext@gmail.com> - Sean Wang <sean.wang@mediatek.com> + - Daniel Golle <daniel@makrotopia.org> description: | - There are two versions of MT7530, standalone and in a multi-chip module. + There are three versions of MT7530, standalone, in a multi-chip module and + built-into a SoC. MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN, MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs. + The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four + Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's + memory map rather than using MDIO. The switch got an internally connected 10G + CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs. + MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs and the switch registers are directly mapped into SoC's memory map rather than - using MDIO. The DSA driver currently doesn't support this. + using MDIO. The DSA driver currently doesn't support MT7620 variants. There is only the standalone version of MT7531. @@ -81,6 +88,10 @@ properties: Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs const: mediatek,mt7621 + - description: + Built-in switch of the MT7988 SoC + const: mediatek,mt7988-switch + reg: maxItems: 1 @@ -93,7 +104,7 @@ properties: gpio-controller: type: boolean - description: + description: | If defined, LED controller of the MT7530 switch will run on GPIO mode. There are 15 controllable pins. @@ -112,7 +123,7 @@ properties: maxItems: 1 io-supply: - description: + description: | Phandle to the regulator node necessary for the I/O power. See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for details for the regulator setup on these boards. @@ -124,7 +135,7 @@ properties: switch is a part of the multi-chip module. reset-gpios: - description: + description: | GPIO to reset the switch. Use this if mediatek,mcm is not used. This property is optional because some boards share the reset line with other components which makes it impossible to probe the switch if the @@ -268,6 +279,17 @@ allOf: required: - mediatek,mcm + - if: + properties: + compatible: + const: mediatek,mt7988-switch + then: + $ref: "#/$defs/mt7530-dsa-port" + properties: + gpio-controller: false + mediatek,mcm: false + reset-names: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index 389892592aac..df64eebebe18 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -18,6 +18,8 @@ description: PHY it is connected to. In this config, an internal mdio-bus is registered and the MDIO master is used for communication. Mixed external and internal mdio-bus configurations are not supported by the hardware. + Each phy has at most 3 LEDs connected and can be declared + using the standard LEDs structure. properties: compatible: @@ -66,7 +68,7 @@ properties: With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. -$ref: "dsa.yaml#" +$ref: dsa.yaml# patternProperties: "^(ethernet-)?ports$": @@ -117,6 +119,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> mdio { #address-cells = <1>; @@ -226,6 +229,25 @@ examples: label = "lan1"; phy-mode = "internal"; phy-handle = <&internal_phy_port1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml index 4116667133ce..82a5d7927ca4 100644 --- a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -62,7 +62,7 @@ properties: mdio: type: object - $ref: "mdio.yaml#" + $ref: mdio.yaml# description: optional node for embedded MDIO controller required: diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 00be387984ac..6b0d359367da 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -205,7 +205,7 @@ properties: duplex is assumed. pause: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that pause should be enabled. @@ -222,6 +222,41 @@ properties: required: - speed + leds: + description: + Describes the LEDs associated by Ethernet Controller. + These LEDs are not integrated in the PHY and PHY doesn't have any + control on them. Ethernet Controller regs are used to control + these defined LEDs. + + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^led@[a-f0-9]+$': + $ref: /schemas/leds/common.yaml# + + properties: + reg: + maxItems: 1 + description: + This define the LED index in the PHY or the MAC. It's really + driver dependent and required for ports that define multiple + LED for the same port. + + required: + - reg + + unevaluatedProperties: false + + additionalProperties: false + dependencies: pcs-handle-names: [pcs-handle] diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 1327b81f15a2..4f574532ee13 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -83,7 +83,7 @@ properties: 0: Disable 2.4 Vpp operating mode. 1: Request 2.4 Vpp operating mode from link partner. Absence of this property will leave configuration to default values. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] broken-turn-around: @@ -197,6 +197,35 @@ properties: PHY's that have configurable TX internal delays. If this property is present then the PHY applies the TX delay. + leds: + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^led@[a-f0-9]+$': + $ref: /schemas/leds/common.yaml# + + properties: + reg: + maxItems: 1 + description: + This define the LED index in the PHY or the MAC. It's really + driver dependent and required for ports that define multiple + LED for the same port. + + required: + - reg + + unevaluatedProperties: false + + additionalProperties: false + required: - reg @@ -204,6 +233,8 @@ additionalProperties: true examples: - | + #include <dt-bindings/leds/common.h> + ethernet { #address-cells = <1>; #size-cells = <0>; @@ -219,5 +250,17 @@ examples: reset-gpios = <&gpio1 4 1>; reset-assert-us = <1000>; reset-deassert-us = <2000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index a04f8ef744aa..f1b9075dc7fb 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -40,6 +40,10 @@ patternProperties: type: object description: Ethernet switch ports + required: + - "#address-cells" + - "#size-cells" + oneOf: - required: - ports @@ -51,7 +55,7 @@ additionalProperties: true $defs: base: description: An ethernet switch without any extra port properties - $ref: '#/' + $ref: '#' patternProperties: "^(ethernet-)?port@[0-9]+$": diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index e6f2045f05de..b494e009326e 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -144,6 +144,9 @@ properties: description: Regulator that powers the Ethernet PHY. + power-domains: + maxItems: 1 + fsl,num-tx-queues: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml index 6e0763898d3a..a1b71b35319e 100644 --- a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml @@ -14,7 +14,7 @@ description: located under the 'dpmacs' node for the fsl-mc bus DTS node. allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml index 8b9b3f915d92..f92730b1d2fa 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml @@ -2,8 +2,8 @@ # Copyright 2018 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP46x PTP Timer (TSYNC) diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index 4e1b79818aff..4fdc5328826c 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -2,13 +2,13 @@ # Copyright 2018 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx ethernet allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# maintainers: - Linus Walleij <linus.walleij@linaro.org> @@ -28,7 +28,7 @@ properties: description: Ethernet MMIO address range queue-rx: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the RX queue node @@ -36,7 +36,7 @@ properties: description: phandle to the RX queue on the NPE queue-txready: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the TX READY queue node @@ -48,7 +48,7 @@ properties: phy-handle: true intel,npe-handle: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the NPE this ethernet instance is using diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml index e6329febb60c..7a405e9b37b2 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml @@ -2,8 +2,8 @@ # Copyright 2021 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS) @@ -24,7 +24,7 @@ properties: description: The HSS instance intel,npe-handle: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: items: - description: phandle to the NPE this HSS instance is using @@ -33,7 +33,7 @@ properties: and the instance to use in the second cell intel,queue-chl-rxtrig: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the RX trigger queue on the NPE @@ -41,7 +41,7 @@ properties: description: phandle to the RX trigger queue on the NPE intel,queue-chl-txready: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the TX ready queue on the NPE @@ -49,7 +49,7 @@ properties: description: phandle to the TX ready queue on the NPE intel,queue-pkt-rx: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the RX queue on the NPE @@ -57,7 +57,7 @@ properties: description: phandle to the packet RX queue on the NPE intel,queue-pkt-tx: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 4 items: items: @@ -66,7 +66,7 @@ properties: description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE intel,queue-pkt-rxfree: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 4 items: items: @@ -76,7 +76,7 @@ properties: RXFREE3 queues on the NPE intel,queue-pkt-txdone: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the TXDONE queue on the NPE diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml index 8e288ab38fd7..3a3325168048 100644 --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -20,7 +20,7 @@ description: |+ definition. allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml index 309ef21a1e37..188a42ca6ceb 100644 --- a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/marvell-bluetooth.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/marvell-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell Bluetooth chips @@ -15,11 +15,29 @@ maintainers: properties: compatible: - const: mrvl,88w8897 + enum: + - mrvl,88w8897 + - mrvl,88w8997 + + max-speed: + description: see Documentation/devicetree/bindings/serial/serial.yaml required: - compatible +allOf: + - if: + properties: + compatible: + contains: + const: mrvl,88w8997 + then: + properties: + max-speed: true + else: + properties: + max-speed: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml index 1d83b8dcce2c..dca1aec119e3 100644 --- a/Documentation/devicetree/bindings/net/mdio-gpio.yaml +++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml @@ -12,7 +12,7 @@ maintainers: - Russell King <linux@armlinux.org.uk> allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index 7ef696204c5a..acb2b2ac4fe1 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -21,6 +21,7 @@ properties: - mediatek,mt7623-eth - mediatek,mt7622-eth - mediatek,mt7629-eth + - mediatek,mt7981-eth - mediatek,mt7986-eth - ralink,rt5350-eth @@ -78,6 +79,11 @@ properties: description: List of phandles to wireless ethernet dispatch nodes. + mediatek,wed-pcie: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek wed-pcie controller. + dma-coherent: true mdio-bus: @@ -91,7 +97,7 @@ properties: const: 0 allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# - if: properties: compatible: @@ -123,6 +129,8 @@ allOf: mediatek,wed: false + mediatek,wed-pcie: false + - if: properties: compatible: @@ -160,6 +168,8 @@ allOf: description: Phandle to the mediatek pcie-mirror controller. + mediatek,wed-pcie: false + - if: properties: compatible: @@ -206,6 +216,44 @@ allOf: mediatek,wed: false + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: + const: mediatek,mt7981-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 15 + maxItems: 15 + + clock-names: + items: + - const: fe + - const: gp2 + - const: gp1 + - const: wocpu0 + - const: sgmii_ck + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: netsys0 + - const: netsys1 + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + - if: properties: compatible: @@ -242,11 +290,6 @@ allOf: minItems: 2 maxItems: 2 - mediatek,wed-pcie: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle to the mediatek wed-pcie controller. - patternProperties: "^mac@[0-1]$": type: object diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml index 64c893c98d80..2e889f9a563e 100644 --- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml @@ -15,7 +15,7 @@ description: modes with flow-control as well as CRC offloading and VLAN tags. allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml index dc116f14750e..306ef9ecf2b9 100644 --- a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml @@ -73,7 +73,7 @@ properties: "^port@[0-9a-f]+$": type: object - $ref: "/schemas/net/ethernet-controller.yaml#" + $ref: /schemas/net/ethernet-controller.yaml# unevaluatedProperties: false properties: diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml index 57ffeb8fc876..fcafef8d5a33 100644 --- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -99,7 +99,7 @@ properties: microchip,bandwidth: description: Specifies bandwidth in Mbit/s allocated to the port. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 25000 microchip,sd-sgpio: @@ -107,7 +107,7 @@ properties: Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs This is optional, and only needed if the default used index is is not correct. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 383 diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml index 2c451cfa4e0b..5b292e7c9e46 100644 --- a/Documentation/devicetree/bindings/net/mscc,miim.yaml +++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml @@ -10,7 +10,7 @@ maintainers: - Alexandre Belloni <alexandre.belloni@bootlin.com> allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml index 308485a8ee6c..8e9a95f24c80 100644 --- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -28,7 +28,7 @@ properties: maxItems: 1 reset-n-io: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 description: | Output GPIO pin used to reset the chip (active low) diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml index 0509e0166345..07c67c1e985f 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml @@ -31,7 +31,7 @@ required: - compatible dependencies: - interrupts: [ 'reg' ] + interrupts: [ reg ] additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml new file mode 100644 index 000000000000..66a95191bd77 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/mediatek,sgmiisys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SGMIISYS Controller + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + The MediaTek SGMIISYS controller provides a SGMII PCS and some clocks + to the ethernet subsystem to which it is attached. + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-sgmiisys + - mediatek,mt7629-sgmiisys + - mediatek,mt7981-sgmiisys_0 + - mediatek,mt7981-sgmiisys_1 + - mediatek,mt7986-sgmiisys_0 + - mediatek,mt7986-sgmiisys_1 + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + mediatek,pnswap: + description: Invert polarity of the SGMII data lanes + type: boolean + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + sgmiisys: syscon@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml index c6b1c188abf7..94a527e6aa1b 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml @@ -13,7 +13,7 @@ description: Regulator based PoDL PSE controller. The device must be referenced by the PHY node to control power injection to the Ethernet cable. allOf: - - $ref: "pse-controller.yaml#" + - $ref: pse-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt deleted file mode 100644 index 1f5746849a71..000000000000 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt +++ /dev/null @@ -1,66 +0,0 @@ -Qualcomm Ethernet ETHQOS device - -This documents dwmmac based ethernet device which supports Gigabit -ethernet for version v2.3.0 onwards. - -This device has following properties: - -Required properties: - -- compatible: Should be one of: - "qcom,qcs404-ethqos" - "qcom,sm8150-ethqos" - -- reg: Address and length of the register set for the device - -- reg-names: Should contain register names "stmmaceth", "rgmii" - -- clocks: Should contain phandle to clocks - -- clock-names: Should contain clock names "stmmaceth", "pclk", - "ptp_ref", "rgmii" - -- interrupts: Should contain phandle to interrupts - -- interrupt-names: Should contain interrupt names "macirq", "eth_lpi" - -Rest of the properties are defined in stmmac.txt file in same directory - - -Example: - -ethernet: ethernet@7a80000 { - compatible = "qcom,qcs404-ethqos"; - reg = <0x07a80000 0x10000>, - <0x07a96000 0x100>; - reg-names = "stmmaceth", "rgmii"; - clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; - clocks = <&gcc GCC_ETH_AXI_CLK>, - <&gcc GCC_ETH_SLAVE_AHB_CLK>, - <&gcc GCC_ETH_PTP_CLK>, - <&gcc GCC_ETH_RGMII_CLK>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_lpi"; - snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - - snps,txpbl = <8>; - snps,rxpbl = <2>; - snps,aal; - snps,tso; - - phy-handle = <&phy1>; - phy-mode = "rgmii"; - - mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; - compatible = "snps,dwmac-mdio"; - phy1: phy@4 { - device_type = "ethernet-phy"; - reg = <0x4>; - }; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml new file mode 100644 index 000000000000..60a38044fb19 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Ethernet ETHQOS device + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: + dwmmac based Qualcomm ethernet devices which support Gigabit + ethernet (version v2.3.0 and onwards). + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + enum: + - qcom,qcs404-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos + + reg: + maxItems: 2 + + reg-names: + items: + - const: stmmaceth + - const: rgmii + + interrupts: + items: + - description: Combined signal for various interrupt events + - description: The interrupt that occurs when Rx exits the LPI state + + interrupt-names: + items: + - const: macirq + - const: eth_lpi + + clocks: + maxItems: 4 + + clock-names: + items: + - const: stmmaceth + - const: pclk + - const: ptp_ref + - const: rgmii + + iommus: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + #include <dt-bindings/gpio/gpio.h> + + ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + snps,tso; + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x4>; + + #phy-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 4aeda379726f..2d5e4ffb2f9e 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -49,6 +49,7 @@ properties: - qcom,sc7280-ipa - qcom,sdm845-ipa - qcom,sdx55-ipa + - qcom,sdx65-ipa - qcom,sm6350-ipa - qcom,sm8350-ipa diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml index 7631ecc8fd01..3407e909e8a7 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml @@ -51,7 +51,7 @@ required: - "#size-cells" allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml index d7748dd33199..164704338ef0 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -14,7 +14,7 @@ description: used to communicate with the gmac phy connected. allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: @@ -53,7 +53,9 @@ examples: reg = <0x10>; ports { - /* ... */ + #address-cells = <1>; + #size-cells = <0>; + /* ... */ }; }; }; diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index 143b5667abad..8cc2b9924680 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -4,24 +4,30 @@ $id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth +title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth maintainers: - Vasily Khoruzhick <anarsoul@gmail.com> - Alistair Francis <alistair@alistair23.me> description: - RTL8723CS/RTL8723CS/RTL8822CS is WiFi + BT chip. WiFi part is connected over - SDIO, while BT is connected over serial. It speaks H5 protocol with few - extra commands to upload firmware and change module speed. + RTL8723CS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part + is connected over SDIO, while BT is connected over serial. It speaks + H5 protocol with few extra commands to upload firmware and change + module speed. properties: compatible: - enum: - - realtek,rtl8723bs-bt - - realtek,rtl8723cs-bt - - realtek,rtl8723ds-bt - - realtek,rtl8822cs-bt + oneOf: + - enum: + - realtek,rtl8723bs-bt + - realtek,rtl8723cs-bt + - realtek,rtl8723ds-bt + - realtek,rtl8822cs-bt + - items: + - enum: + - realtek,rtl8821cs-bt + - const: realtek,rtl8822cs-bt device-wake-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/rockchip,emac.yaml b/Documentation/devicetree/bindings/net/rockchip,emac.yaml index a6d4f14df442..364028b3bba4 100644 --- a/Documentation/devicetree/bindings/net/rockchip,emac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip,emac.yaml @@ -61,7 +61,7 @@ required: - mdio allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 04936632fcbb..2a21bbe02892 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/rockchip-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip 10/100/1000 Ethernet driver(GMAC) diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index 231c4d75e4b1..973e478a399d 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/sff,sfp.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/sff,sfp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP) Transceiver diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 16b7d2904696..363b3e3ea3a6 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -30,6 +30,7 @@ select: - snps,dwmac-4.10a - snps,dwmac-4.20a - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 @@ -65,6 +66,9 @@ properties: - ingenic,x2000-mac - loongson,ls2k-dwmac - loongson,ls7a-dwmac + - qcom,qcs404-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos - renesas,r9a06g032-gmac - renesas,rzn1-gmac - rockchip,px30-gmac @@ -87,8 +91,10 @@ properties: - snps,dwmac-4.10a - snps,dwmac-4.20a - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 + - starfive,jh7110-dwmac reg: minItems: 1 @@ -105,7 +111,7 @@ properties: minItems: 1 items: - const: macirq - - const: eth_wake_irq + - enum: [eth_wake_irq, eth_lpi] - const: eth_lpi clocks: @@ -131,12 +137,16 @@ properties: - ptp_ref resets: - maxItems: 1 - description: - MAC Reset signal. + minItems: 1 + items: + - description: GMAC stmmaceth reset + - description: AHB reset reset-names: - const: stmmaceth + minItems: 1 + items: + - const: stmmaceth + - const: ahb power-domains: maxItems: 1 @@ -555,7 +565,7 @@ dependencies: snps,reset-delays-us: ["snps,reset-gpio"] allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# - if: properties: compatible: @@ -572,9 +582,11 @@ allOf: - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - qcom,sc8280xp-ethqos - snps,dwmac-3.50a - snps,dwmac-4.10a - snps,dwmac-4.20a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac @@ -625,10 +637,14 @@ allOf: - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - qcom,qcs404-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml new file mode 100644 index 000000000000..5e7cfbbebce6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 StarFive Technology Co., Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 DWMAC glue layer + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + - Samin Guo <samin.guo@starfivetech.com> + +select: + properties: + compatible: + contains: + enum: + - starfive,jh7110-dwmac + required: + - compatible + +properties: + compatible: + items: + - enum: + - starfive,jh7110-dwmac + - const: snps,dwmac-5.20 + + reg: + maxItems: 1 + + clocks: + items: + - description: GMAC main clock + - description: GMAC AHB clock + - description: PTP clock + - description: TX clock + - description: GTX clock + + clock-names: + items: + - const: stmmaceth + - const: pclk + - const: ptp_ref + - const: tx + - const: gtx + + interrupts: + minItems: 3 + maxItems: 3 + + interrupt-names: + minItems: 3 + maxItems: 3 + + resets: + items: + - description: MAC Reset signal. + - description: AHB Reset signal. + + reset-names: + items: + - const: stmmaceth + - const: ahb + + starfive,tx-use-rgmii-clk: + description: + Tx clock is provided by external rgmii clock. + type: boolean + + starfive,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that configures phy mode + - description: Offset of phy mode selection + - description: Shift of phy mode selection + description: + A phandle to syscon with two arguments that configure phy mode. + The argument one is the offset of phy mode selection, the + argument two is the shift of phy mode selection. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + ethernet@16030000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x16030000 0x10000>; + clocks = <&clk 3>, <&clk 2>, <&clk 109>, + <&clk 6>, <&clk 111>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&rst 1>, <&rst 2>; + reset-names = "stmmaceth", "ahb"; + interrupts = <7>, <6>, <5>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + phy-mode = "rgmii-id"; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,tso; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&aon_syscon 0xc 0x12>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <4>; + snps,blen = <256 128 64 32 0 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 5c93167b3b41..fc8c96b08d7d 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/stm32-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 / MCU DWMAC glue layer controller @@ -26,7 +26,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: @@ -73,7 +73,7 @@ properties: - ptp_ref st,syscon: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the syscon node which encompases the glue register diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index e36c7817be69..b04ac4966608 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -62,10 +62,10 @@ properties: interrupt-names: items: - - const: "rx_thresh" - - const: "rx" - - const: "tx" - - const: "misc" + - const: rx_thresh + - const: rx + - const: tx + - const: misc pinctrl-names: true @@ -154,7 +154,7 @@ patternProperties: type: object description: CPSW MDIO bus. - $ref: "ti,davinci-mdio.yaml#" + $ref: ti,davinci-mdio.yaml# required: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index a339202c5e8e..53604fab0b73 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -13,7 +13,7 @@ description: TI SoC Davinci/Keystone2 MDIO Controller allOf: - - $ref: "mdio.yaml#" + - $ref: mdio.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml index f2489a9c852f..db74474207ed 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/ti,dp83822.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TI DP83822 ethernet PHY @@ -21,7 +21,7 @@ description: | http://www.ti.com/lit/ds/symlink/dp83822i.pdf allOf: - - $ref: "ethernet-phy.yaml#" + - $ref: ethernet-phy.yaml# properties: reg: diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index b8c0e4b5b494..4bc1f98fd9fe 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -2,13 +2,13 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/ti,dp83867.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/ti,dp83867.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TI DP83867 ethernet PHY allOf: - - $ref: "ethernet-controller.yaml#" + - $ref: ethernet-controller.yaml# maintainers: - Andrew Davis <afd@ti.com> diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index b04ff0014a59..fb6725df4668 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -2,13 +2,13 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/ti,dp83869.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TI DP83869 ethernet PHY allOf: - - $ref: "ethernet-phy.yaml#" + - $ref: ethernet-phy.yaml# maintainers: - Andrew Davis <afd@ti.com> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 837d6db299c4..395a4650e285 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -54,11 +54,12 @@ properties: compatible: enum: + - ti,am642-cpsw-nuss - ti,am654-cpsw-nuss - ti,j7200-cpswxg-nuss - ti,j721e-cpsw-nuss - ti,j721e-cpswxg-nuss - - ti,am642-cpsw-nuss + - ti,j784s4-cpswxg-nuss reg: maxItems: 1 @@ -126,8 +127,18 @@ properties: description: CPSW port number phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY + minItems: 1 + items: + - description: CPSW MAC's PHY. + - description: Serdes PHY. Serdes PHY is required only if + the Serdes has to be configured in the + Single-Link configuration. + + phy-names: + minItems: 1 + items: + - const: mac + - const: serdes label: description: label associated with this port @@ -187,7 +198,9 @@ allOf: properties: compatible: contains: - const: ti,j721e-cpswxg-nuss + enum: + - ti,j721e-cpswxg-nuss + - ti,j784s4-cpswxg-nuss then: properties: ethernet-ports: @@ -205,8 +218,9 @@ allOf: compatible: contains: enum: - - ti,j721e-cpswxg-nuss - ti,j7200-cpswxg-nuss + - ti,j721e-cpswxg-nuss + - ti,j784s4-cpswxg-nuss then: properties: ethernet-ports: diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index 0988ed8d1c12..474fa8bcf302 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Toshiba Visconti DWMAC Ethernet controller diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml index 6a71f694cb55..4c4ced8cfa4b 100644 --- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml +++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/net/vertexcom-mse102x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: The Vertexcom MSE102x (SPI) diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 7d526ff53fb7..67b63f119f64 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -111,6 +111,11 @@ properties: $ref: /schemas/leds/common.yaml# additionalProperties: false properties: + led-active-low: + description: + LED is enabled with ground signal. + type: boolean + led-sources: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt deleted file mode 100644 index b61c2d5a0ff7..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ /dev/null @@ -1,215 +0,0 @@ -* Qualcomm Atheros ath10k wireless devices - -Required properties: -- compatible: Should be one of the following: - * "qcom,ath10k" - * "qcom,ipq4019-wifi" - * "qcom,wcn3990-wifi" - -PCI based devices uses compatible string "qcom,ath10k" and takes calibration -data along with board specific data via "qcom,ath10k-calibration-data". -Rest of the properties are not applicable for PCI based devices. - -AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi" -and also uses most of the properties defined in this doc (except -"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data" -to carry pre calibration data. - -In general, entry "qcom,ath10k-pre-calibration-data" and -"qcom,ath10k-calibration-data" conflict with each other and only one -can be provided per device. - -SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". - -- reg: Address and length of the register set for the device. -- reg-names: Must include the list of following reg names, - "membase" -- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" - compatible target. - reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" - compatible target. - Must contain interrupt-names property per entry for - "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. - -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" - compatible targets. - -Optional properties: -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reseti.txt for details. -- reset-names: Must include the list of following reset names, - "wifi_cpu_init" - "wifi_radio_srif" - "wifi_radio_warm" - "wifi_radio_cold" - "wifi_core_warm" - "wifi_core_cold" -- clocks: List of clock specifiers, must contain an entry for each required - entry in clock-names. -- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and - "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi" - compatible target. -- qcom,msi_addr: MSI interrupt address. -- qcom,msi_base: Base value to add before writing MSI data into - MSI address register. -- qcom,ath10k-calibration-variant: string to search for in the board-2.bin - variant list with the same bus and device - specific ids -- qcom,ath10k-calibration-data : calibration data + board specific data - as an array, the length can vary between - hw versions. -- qcom,ath10k-pre-calibration-data : pre calibration data as an array, - the length can vary between hw versions. -- <supply-name>-supply: handle to the regulator device tree node - optional "supply-name" are "vdd-0.8-cx-mx", - "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0", - and "vdd-3.3-ch1". -- memory-region: - Usage: optional - Value type: <phandle> - Definition: reference to the reserved-memory for the msa region - used by the wifi firmware running in Q6. -- iommus: - Usage: optional - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. -- ext-fem-name: - Usage: Optional - Value type: string - Definition: Name of external front end module used. Some valid FEM names - for example: "microsemi-lx5586", "sky85703-11" - and "sky85803" etc. -- qcom,snoc-host-cap-8bit-quirk: - Usage: Optional - Value type: <empty> - Definition: Quirk specifying that the firmware expects the 8bit version - of the host capability QMI request -- qcom,xo-cal-data: xo cal offset to be configured in xo trim register. - -- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically - mapped msa region. - -- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex - support by the hardware. -- qcom,coexist-gpio-pin : gpio pin number information to support coex - which will be used by wifi firmware. - -* Subnodes -The ath10k wifi node can contain one optional firmware subnode. -Firmware subnode is needed when the platform does not have TustZone. -The firmware subnode must have: - -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. - - -Example (to supply PCI based wifi block details): - -In this example, the node is defined as child node of the PCI controller. - -pci { - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - wifi@0,0 { - reg = <0 0 0 0 0>; - qcom,ath10k-calibration-data = [ 01 02 03 ... ]; - ext-fem-name = "microsemi-lx5586"; - }; - }; -}; - -Example (to supply ipq4019 SoC wifi block details): - -wifi0: wifi@a000000 { - compatible = "qcom,ipq4019-wifi"; - reg = <0xa000000 0x200000>; - resets = <&gcc WIFI0_CPU_INIT_RESET>, - <&gcc WIFI0_RADIO_SRIF_RESET>, - <&gcc WIFI0_RADIO_WARM_RESET>, - <&gcc WIFI0_RADIO_COLD_RESET>, - <&gcc WIFI0_CORE_WARM_RESET>, - <&gcc WIFI0_CORE_COLD_RESET>; - reset-names = "wifi_cpu_init", - "wifi_radio_srif", - "wifi_radio_warm", - "wifi_radio_cold", - "wifi_core_warm", - "wifi_core_cold"; - clocks = <&gcc GCC_WCSS2G_CLK>, - <&gcc GCC_WCSS2G_REF_CLK>, - <&gcc GCC_WCSS2G_RTC_CLK>; - clock-names = "wifi_wcss_cmd", - "wifi_wcss_ref", - "wifi_wcss_rtc"; - interrupts = <0 0x20 0x1>, - <0 0x21 0x1>, - <0 0x22 0x1>, - <0 0x23 0x1>, - <0 0x24 0x1>, - <0 0x25 0x1>, - <0 0x26 0x1>, - <0 0x27 0x1>, - <0 0x28 0x1>, - <0 0x29 0x1>, - <0 0x2a 0x1>, - <0 0x2b 0x1>, - <0 0x2c 0x1>, - <0 0x2d 0x1>, - <0 0x2e 0x1>, - <0 0x2f 0x1>, - <0 0xa8 0x0>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7", - "msi8", "msi9", "msi10", "msi11", - "msi12", "msi13", "msi14", "msi15", - "legacy"; - qcom,msi_addr = <0x0b006040>; - qcom,msi_base = <0x40>; - qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; - qcom,coexist-support = <1>; - qcom,coexist-gpio-pin = <0x33>; -}; - -Example (to supply wcn3990 SoC wifi block details): - -wifi@18000000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0x18800000 0x800000>; - reg-names = "membase"; - clocks = <&clock_gcc clk_rf_clk2_pin>; - clock-names = "cxo_ref_clk_pin"; - interrupts = - <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; - vdd-0.8-cx-mx-supply = <&pm8998_l5>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - vdd-3.3-ch1-supply = <&vreg_l26a_3p3>; - memory-region = <&wifi_msa_mem>; - iommus = <&apps_smmu 0x0040 0x1>; - qcom,msa-fixed-perm; - wifi-firmware { - iommus = <&apps_iommu 0xc22 0x1>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml new file mode 100644 index 000000000000..c85ed330426d --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -0,0 +1,358 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath10k wireless devices + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: + Qualcomm Technologies, Inc. IEEE 802.11ac devices. + +properties: + compatible: + enum: + - qcom,ath10k # SDIO-based devices + - qcom,ipq4019-wifi + - qcom,wcn3990-wifi # SNoC-based devices + + reg: + maxItems: 1 + + reg-names: + items: + - const: membase + + interrupts: + minItems: 12 + maxItems: 17 + + interrupt-names: + minItems: 12 + maxItems: 17 + + memory-region: + maxItems: 1 + description: + Reference to the MSA memory region used by the Wi-Fi firmware + running on the Q6 core. + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + resets: + maxItems: 6 + + reset-names: + items: + - const: wifi_cpu_init + - const: wifi_radio_srif + - const: wifi_radio_warm + - const: wifi_radio_cold + - const: wifi_core_warm + - const: wifi_core_cold + + ext-fem-name: + $ref: /schemas/types.yaml#/definitions/string + description: Name of external front end module used. + enum: + - microsemi-lx5586 + - sky85703-11 + - sky85803 + + wifi-firmware: + type: object + additionalProperties: false + description: | + The ath10k Wi-Fi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + properties: + iommus: + maxItems: 1 + required: + - iommus + + qcom,ath10k-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data + board-specific data as a byte array. The length + can vary between hardware versions. + + qcom,ath10k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + Unique variant identifier of the calibration data in board-2.bin + for designs with colliding bus and device specific ids + + qcom,ath10k-pre-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Pre-calibration data as a byte array. The length can vary between + hardware versions. + + qcom,coexist-support: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1] + description: + Indicate coex support by the hardware. + + qcom,coexist-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + COEX GPIO number provided to the Wi-Fi firmware. + + qcom,msa-fixed-perm: + type: boolean + description: + Whether to skip executing an SCM call that reassigns the memory + region ownership. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the WLAN Q6. + items: + - description: Signal bits used to enable/disable low power mode + on WCN in the case of WoW (Wake on Wireless). + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output. + items: + - const: wlan-smp2p-out + + qcom,snoc-host-cap-8bit-quirk: + type: boolean + description: + Quirk specifying that the firmware expects the 8bit version + of the host capability QMI request + + qcom,xo-cal-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + XO cal offset to be configured in XO trim register. + + vdd-0.8-cx-mx-supply: + description: Main logic power rail + + vdd-1.8-xo-supply: + description: Crystal oscillator supply + + vdd-1.3-rfa-supply: + description: RFA supply + + vdd-3.3-ch0-supply: + description: Primary Wi-Fi antenna supply + + vdd-3.3-ch1-supply: + description: Secondary Wi-Fi antenna supply + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-wifi + then: + properties: + interrupts: + minItems: 17 + maxItems: 17 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + - const: msi8 + - const: msi9 + - const: msi10 + - const: msi11 + - const: msi12 + - const: msi13 + - const: msi14 + - const: msi15 + - const: legacy + + clocks: + items: + - description: Wi-Fi command clock + - description: Wi-Fi reference clock + - description: Wi-Fi RTC clock + + clock-names: + items: + - const: wifi_wcss_cmd + - const: wifi_wcss_ref + - const: wifi_wcss_rtc + + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3990-wifi + + then: + properties: + clocks: + minItems: 1 + items: + - description: XO reference clock + - description: Qualcomm Debug Subsystem clock + + clock-names: + minItems: 1 + items: + - const: cxo_ref_clk_pin + - const: qdss + + interrupts: + items: + - description: CE0 + - description: CE1 + - description: CE2 + - description: CE3 + - description: CE4 + - description: CE5 + - description: CE6 + - description: CE7 + - description: CE8 + - description: CE9 + - description: CE10 + - description: CE11 + + interrupt-names: false + + required: + - interrupts + +examples: + # SNoC + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + clock-names = "cxo_ref_clk_pin"; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&anoc2_smmu 0x1900>, + <&anoc2_smmu 0x1901>; + qcom,snoc-host-cap-8bit-quirk; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; + + # AHB + - | + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + + wifi@a000000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa000000 0x200000>; + resets = <&gcc WIFI0_CPU_INIT_RESET>, + <&gcc WIFI0_RADIO_SRIF_RESET>, + <&gcc WIFI0_RADIO_WARM_RESET>, + <&gcc WIFI0_RADIO_COLD_RESET>, + <&gcc WIFI0_CORE_WARM_RESET>, + <&gcc WIFI0_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", + "wifi_radio_srif", + "wifi_radio_warm", + "wifi_radio_cold", + "wifi_core_warm", + "wifi_core_cold"; + clocks = <&gcc GCC_WCSS2G_CLK>, + <&gcc GCC_WCSS2G_REF_CLK>, + <&gcc GCC_WCSS2G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", + "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8", + "msi9", + "msi10", + "msi11", + "msi12", + "msi13", + "msi14", + "msi15", + "legacy"; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml new file mode 100644 index 000000000000..817f02a8b481 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Linaro Limited +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath11k wireless devices (PCIe) + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: | + Qualcomm Technologies IEEE 802.11ax PCIe devices + +properties: + compatible: + enum: + - pci17cb,1103 # WCN6855 + + reg: + maxItems: 1 + + qcom,ath11k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: | + string to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; + }; |