diff options
Diffstat (limited to 'Documentation/devicetree')
15 files changed, 60 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml index 9b31f864e071..71364c6081ff 100644 --- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml +++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml @@ -32,7 +32,7 @@ properties: maxItems: 1 iommus: - maxItems: 1 + maxItems: 4 power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index e6c1ebfe8a32..130e16d025bc 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -82,6 +82,18 @@ properties: Indicates if the DSI controller is driving a panel which needs 2 DSI links. + qcom,master-dsi: + type: boolean + description: | + Indicates if the DSI controller is the master DSI controller when + qcom,dual-dsi-mode enabled. + + qcom,sync-dual-dsi: + type: boolean + description: | + Indicates if the DSI controller needs to sync the other DSI controller + with MIPI DCS commands when qcom,dual-dsi-mode enabled. + assigned-clocks: minItems: 2 maxItems: 4 diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml index 4fb05eb84e2a..164331eb6275 100644 --- a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml +++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Lattice Slave SPI sysCONFIG FPGA manager maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: | Lattice sysCONFIG port, which is used for FPGA configuration, among others, diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index 527532f039ce..a157eecfb5fc 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Polarfire FPGA manager. maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index 63369ba388e4..0a192ca192c5 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + vref-supply: + description: | + External ADC reference voltage supply on VREFH pad. If VERID[MVI] is + set, there are additional, internal reference voltages selectable. + VREFH1 is always from VREFH pad. + "#io-channel-cells": const: 1 @@ -72,6 +78,7 @@ examples: assigned-clocks = <&clk IMX_SC_R_ADC_0>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; + vref-supply = <®_1v8>; #io-channel-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml index 1c7aee5ed3e0..36dff3250ea7 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -90,7 +90,7 @@ patternProperties: of the MAX chips to the GyroADC, while MISO line of each Maxim ADC connects to a shared input pin of the GyroADC. enum: - - adi,7476 + - adi,ad7476 - fujitsu,mb88101a - maxim,max1162 - maxim,max11100 diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 92117261e1e1..39e64c7f6360 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -166,6 +166,12 @@ properties: resets: maxItems: 1 + mediatek,broken-save-restore-fw: + type: boolean + description: + Asserts that the firmware on this device has issues saving and restoring + GICR registers when the GIC redistributors are powered off. + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml index 769fa5c27b76..de1d4298893b 100644 --- a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -21,11 +21,22 @@ properties: st,can-primary: description: - Primary and secondary mode of the bxCAN peripheral is only relevant - if the chip has two CAN peripherals. In that case they share some - of the required logic. + Primary mode of the bxCAN peripheral is only relevant if the chip has + two CAN peripherals in dual CAN configuration. In that case they share + some of the required logic. + Not to be used if the peripheral is in single CAN configuration. To avoid misunderstandings, it should be noted that ST documentation - uses the terms master/slave instead of primary/secondary. + uses the terms master instead of primary. + type: boolean + + st,can-secondary: + description: + Secondary mode of the bxCAN peripheral is only relevant if the chip + has two CAN peripherals in dual CAN configuration. In that case they + share some of the required logic. + Not to be used if the peripheral is in single CAN configuration. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms slave instead of secondary. type: boolean reg: diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index eb3488d8f9ee..6a7be42da523 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -70,6 +70,7 @@ properties: dsr-gpios: true rng-gpios: true dcd-gpios: true + rs485-rts-active-high: true rts-gpio: true power-domains: true clock-frequency: true diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index a5bb561bfcfb..31a3024ea789 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -55,7 +55,9 @@ properties: description: TDM TX current sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -72,7 +74,7 @@ examples: codec: codec@4c { compatible = "ti,tas2562"; reg = <0x4c>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; shutdown-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 26088adb9dc2..8908bf1122e9 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -57,7 +57,9 @@ properties: - 1 # Falling edge '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -74,7 +76,7 @@ examples: codec: codec@41 { compatible = "ti,tas2770"; reg = <0x41>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 8cba01316855..a876545ec87d 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -50,7 +50,9 @@ properties: description: TDM TX voltage sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -67,7 +69,7 @@ examples: codec: codec@38 { compatible = "ti,tas2764"; reg = <0x38>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index f59125bc79d1..0b4e21bde5bc 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -8,7 +8,7 @@ Required properties: "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 "ti,tas2505" TAS2505, TAS2521 - reg: I2C slave address - - supply-*: Required supply regulators are: + - *-supply: Required supply regulators are: "iov" - digital IO power supply "ldoin" - LDO power supply "dv" - Digital core power supply diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index cae46c4982ad..69a93a0722f0 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -64,7 +64,7 @@ properties: description: size of memory intended as internal memory for endpoints buffers expressed in KB - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint16 cdns,phyrst-a-enable: description: Enable resetting of PHY if Rx fail is detected diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 50edc4da780e..4f7625955ccc 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -287,7 +287,7 @@ properties: description: High-Speed PHY interface selection between UTMI+ and ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/string enum: [utmi, ulpi] snps,quirk-frame-length-adjustment: |