diff options
Diffstat (limited to 'Documentation/input')
| -rw-r--r-- | Documentation/input/devices/elantech.rst | 2 | ||||
| -rw-r--r-- | Documentation/input/input-programming.rst | 19 |
2 files changed, 20 insertions, 1 deletions
diff --git a/Documentation/input/devices/elantech.rst b/Documentation/input/devices/elantech.rst index c3374a7ce7af..98163a258b83 100644 --- a/Documentation/input/devices/elantech.rst +++ b/Documentation/input/devices/elantech.rst @@ -556,7 +556,7 @@ Note on debounce: In case the box has unstable power supply or other electricity issues, or when number of finger changes, F/W would send "debounce packet" to inform driver that the hardware is in debounce status. -The debouce packet has the following signature:: +The debounce packet has the following signature:: byte 0: 0xc4 byte 1: 0xff diff --git a/Documentation/input/input-programming.rst b/Documentation/input/input-programming.rst index c9264814c7aa..2b3e6a34e34b 100644 --- a/Documentation/input/input-programming.rst +++ b/Documentation/input/input-programming.rst @@ -346,3 +346,22 @@ driver can handle these events, it has to set the respective bits in evbit, This callback routine can be called from an interrupt or a BH (although that isn't a rule), and thus must not sleep, and must not take too long to finish. + +Polled input devices +~~~~~~~~~~~~~~~~~~~~ + +Input polling is set up by passing an input device struct and a callback to +the function:: + + int input_setup_polling(struct input_dev *dev, + void (*poll_fn)(struct input_dev *dev)) + +Within the callback, devices should use the regular input_report_* functions +and input_sync as is used by other devices. + +There is also the function:: + + void input_set_poll_interval(struct input_dev *dev, unsigned int interval) + +which is used to configure the interval, in milliseconds, that the device will +be polled at. |