diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 25 |
1 files changed, 8 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 1c24ac8019ba..c894c7c788a9 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -18,9 +18,9 @@ compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; aliases { - serial0 = &uart0; - i2c0 = &i2c0; - i2c1 = &i2c1; + serial0 = &uart0; /* DBGU */ + i2c0 = &i2c0; /* mikroBUS 1 */ + i2c1 = &i2c1; /* XPRO EXT1 */ i2c2 = &i2c2; }; @@ -40,7 +40,7 @@ ahb { usb0: gadget@300000 { - atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -125,8 +125,6 @@ bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; - non-removable; - mmc-ddr-1_8v; status = "okay"; }; @@ -184,7 +182,7 @@ pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -193,20 +191,12 @@ status = "okay"; i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx0_default>; pinctrl-1 = <&pinctrl_flx0_gpio>; sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; - atmel,fifo-size = <16>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; }; @@ -236,7 +226,7 @@ pinctrl-0 = <&pinctrl_i2c1_default>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@50 { @@ -414,6 +404,7 @@ label = "PB_USER"; gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; |