diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8b.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/meson8b.dtsi | 59 |
1 files changed, 58 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index bc278da7df0d..d75e0ceda8bb 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8b-gpio.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> +#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> #include "meson.dtsi" / { @@ -59,6 +60,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x200>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; cpu@201 { @@ -66,6 +69,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x201>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; cpu@202 { @@ -73,6 +78,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x202>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; cpu@203 { @@ -80,6 +87,20 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x203>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; }; }; @@ -90,6 +111,11 @@ }; /* end of / */ &aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xe0 0x18>; + }; + pinctrl_aobus: pinctrl@84 { compatible = "amlogic,meson8b-aobus-pinctrl"; reg = <0x84 0xc>; @@ -104,7 +130,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 130 16>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; }; uart_ao_a_pins: uart_ao_a { @@ -130,6 +156,11 @@ #reset-cells = <1>; }; + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8b-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; + pwm_ef: pwm@86c0 { compatible = "amlogic,meson8b-pwm"; reg = <0x86c0 0x10>; @@ -157,11 +188,31 @@ }; }; +&ahb_sram { + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + + +&efuse { + compatible = "amlogic,meson8b-efuse"; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; +}; + ðmac { clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; }; +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson8b-gpio-intc"; + status = "okay"; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -190,6 +241,12 @@ clock-names = "clkin", "core", "sana"; }; +&sdio { + compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; +}; + &uart_AO { clocks = <&clkc CLKID_CLK81>; }; |