summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra/include/mach/debug-macro.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra/include/mach/debug-macro.S')
-rw-r--r--arch/arm/mach-tegra/include/mach/debug-macro.S88
1 files changed, 77 insertions, 11 deletions
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 619abc63aee8..90069abd37bd 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -1,11 +1,17 @@
/*
* arch/arm/mach-tegra/include/mach/debug-macro.S
*
- * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010,2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
+ * Doug Anderson <dianders@chromium.org>
+ * Stephen Warren <swarren@nvidia.com>
+ *
+ * Portions based on mach-omap2's debug-macro.S
+ * Copyright (C) 1994-1999 Russell King
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -18,18 +24,78 @@
*
*/
+#include <linux/serial_reg.h>
+
#include <mach/io.h>
#include <mach/iomap.h>
+#include <mach/irammap.h>
+
+ .macro addruart, rp, rv, tmp
+ adr \rp, 99f @ actual addr of 99f
+ ldr \rv, [\rp] @ linked addr is stored there
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ linked tegra_uart_config
+ sub \tmp, \rp, \rv @ actual tegra_uart_config
+ ldr \rp, [\tmp] @ Load tegra_uart_config
+ cmp \rp, #1 @ needs intitialization?
+ bne 100f @ no; go load the addresses
+ mov \rv, #0 @ yes; record init is done
+ str \rv, [\tmp]
+ mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM
+ ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
+ movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
+ movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
+ cmp \rv, \rp @ Cookie present?
+ bne 100f @ No, use default UART
+ mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM
+ ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
+ str \rv, [\tmp, #4] @ Store in tegra_uart_phys
+ sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address
+ add \rv, \rv, #IO_APB_VIRT
+ str \rv, [\tmp, #8] @ Store in tegra_uart_virt
+ b 100f
+
+ .align
+99: .word .
+ .word tegra_uart_config
+ .ltorg
+
+100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
+ ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
+ .endm
+
+#define UART_SHIFT 2
+
+/*
+ * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
+ * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
+ * We use the fact that all 5 valid UART addresses all have something in the
+ * 2nd-to-lowest byte.
+ */
- .macro addruart, rp, rv, tmp
- ldr \rp, =IO_APB_PHYS @ physical
- ldr \rv, =IO_APB_VIRT @ virtual
- orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
- orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
- orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF)
- orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
- .endm
+ .macro senduart, rd, rx
+ tst \rx, #0x0000ff00
+ strneb \rd, [\rx, #UART_TX << UART_SHIFT]
+1001:
+ .endm
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+ .macro busyuart, rd, rx
+ tst \rx, #0x0000ff00
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1001b
+1002:
+ .endm
+ .macro waituart, rd, rx
+#ifdef FLOW_CONTROL
+ tst \rx, #0x0000ff00
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+1002:
+#endif
+ .endm