summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-xsc3.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mm/proc-xsc3.S')
-rw-r--r--arch/arm/mm/proc-xsc3.S24
1 files changed, 1 insertions, 23 deletions
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 3533741a76f6..7bd9e7197f60 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
@@ -52,11 +52,6 @@
#define CACHESIZE 32768
/*
- * Run with L2 enabled.
- */
-#define L2_CACHE_ENABLE 1
-
-/*
* This macro is used to wait for a CP15 write and is needed when we
* have to ensure that the last operation to the coprocessor was
* completed before continuing with operation.
@@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range)
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line
- mcrne p15, 1, r0, c7, c11, 1 @ clean L2 line
tst r1, #CACHELINESIZE - 1
mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D line
- mcrne p15, 1, r1, c7, c11, 1 @ clean L2 line
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D line
- mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
@@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range)
ENTRY(xsc3_dma_clean_range)
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
- mcr p15, 1, r0, c7, c11, 1 @ clean L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
@@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range)
ENTRY(xsc3_dma_flush_range)
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line
- mcr p15, 1, r0, c7, c11, 1 @ clean L2 line
- mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
@@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm)
mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
-#ifdef L2_CACHE_ENABLE
orr r0, r0, #0x18 @ cache the page table in L2
-#endif
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
cpwait_ret lr, ip
@@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext)
orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
@ combined with user -> user r/w
-#if L2_CACHE_ENABLE
@ If it's cacheable, it needs to be in L2 also.
eor ip, r1, #L_PTE_CACHEABLE
tst ip, #L_PTE_CACHEABLE
orreq r2, r2, #PTE_EXT_TEX(0x5)
-#endif
tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
movne r2, #0 @ no -> fault
@@ -408,9 +393,7 @@ __xsc3_setup:
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
-#if L2_CACHE_ENABLE
orr r4, r4, #0x18 @ cache the page table in L2
-#endif
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
mov r0, #0 @ don't allow CP access
@@ -418,9 +401,7 @@ __xsc3_setup:
mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg
and r0, r0, #2 @ preserve bit P bit setting
-#if L2_CACHE_ENABLE
orr r0, r0, #(1 << 10) @ enable L2 for LLR cache
-#endif
mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg
adr r5, xsc3_crval
@@ -429,9 +410,6 @@ __xsc3_setup:
bic r0, r0, r5 @ ..V. ..R. .... ..A.
orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu)
@ ...I Z..S .... .... (uc)
-#if L2_CACHE_ENABLE
- orr r0, r0, #0x04000000 @ L2 enable
-#endif
mov pc, lr
.size __xsc3_setup, . - __xsc3_setup