diff options
Diffstat (limited to 'arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts')
| -rw-r--r-- | arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts new file mode 100644 index 000000000000..2bdbb6780242 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "bcm2712.dtsi" + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5"; + + aliases { + serial10 = &uart10; + }; + + chosen: chosen { + stdout-path = "serial10:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0 0x28000000>; + }; + + sd_io_1v8_reg: sd-io-1v8-reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 1>, + <3300000 0>; + }; + + sd_vcc_reg: sd-vcc-reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector + * labeled "UART", i.e. the interface with the system console. + */ +&uart10 { + status = "okay"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; +}; |