diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index bde89de2576e..9421fdd7e30e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -63,20 +63,20 @@ its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x6020000 0 0x20000>; }; }; rstcr: syscon@1e60000 { - compatible = "fsl,ls2080a-rstcr", "syscon"; + compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd"; reg = <0x0 0x1e60000 0x0 0x4>; - }; - reboot { - compatible = "syscon-reboot"; - regmap = <&rstcr>; - offset = <0x0>; - mask = <0x2>; + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x2>; + }; }; thermal-zones { @@ -122,7 +122,7 @@ }; }; - core-cluster1-thermal { + cluster1-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 4>; @@ -151,7 +151,7 @@ }; }; - core-cluster2-thermal { + cluster2-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 5>; @@ -180,7 +180,7 @@ }; }; - core-cluster3-thermal { + cluster3-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 6>; @@ -209,7 +209,7 @@ }; }; - core-cluster4-thermal { + cluster4-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 7>; @@ -758,7 +758,7 @@ compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; + msi-parent = <&its 0>; iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ dma-coherent; #address-cells = <3>; @@ -1075,7 +1075,7 @@ }; pcie1: pcie@3400000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1085,7 +1085,7 @@ dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, @@ -1097,7 +1097,7 @@ }; pcie2: pcie@3500000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1107,7 +1107,7 @@ dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, @@ -1119,7 +1119,7 @@ }; pcie3: pcie@3600000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1129,7 +1129,7 @@ dma-coherent; num-viewport = <256>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, @@ -1141,7 +1141,7 @@ }; pcie4: pcie@3700000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1151,7 +1151,7 @@ dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, @@ -1218,7 +1218,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; }; - rcpm: power-controller@1e34040 { + rcpm: wakeup-controller@1e34040 { compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1e34040 0x0 0x18>; #fsl,rcpm-wakeup-cells = <6>; |