diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/mba8mx.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/mba8mx.dtsi | 9 |
1 files changed, 7 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 815241526a0d..c60c7a9e54af 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -185,6 +185,8 @@ reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>; reset-assert-us = <500000>; reset-deassert-us = <500>; + interrupt-parent = <&expander2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -237,7 +239,6 @@ }; &i2c2 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -258,6 +259,11 @@ reg = <0x1f>; }; + /* + * TUSB8041 is at 0x41, but not connected by default + * Note: TUSB8041 only supports 100 kHz! + */ + eeprom3: eeprom@57 { compatible = "nxp,se97b", "atmel,24c02"; reg = <0x57>; @@ -274,7 +280,6 @@ }; &i2c3 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_gpio>; |