diff options
Diffstat (limited to 'arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi | 128 |
1 files changed, 59 insertions, 69 deletions
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 82ce007d9959..196868898f49 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -13,49 +13,96 @@ priority = <200>; }; + i2c0_imux: i2c-mux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; + leds { compatible = "gpio-leds"; - led@0 { + led-0 { label = "eth60:yellow"; gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@1 { + led-1 { label = "eth60:green"; gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@2 { + led-2 { label = "eth61:yellow"; gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@3 { + led-3 { label = "eth61:green"; gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@4 { + led-4 { label = "eth62:yellow"; gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@5 { + led-5 { label = "eth62:green"; gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@6 { + led-6 { label = "eth63:yellow"; gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@7 { + led-7 { label = "eth63:green"; gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; + + sfp_eth60: sfp-eth60 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth61: sfp-eth61 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth62: sfp-eth62 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; + tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth63: sfp-eth63 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; + tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; + }; }; &gpio { @@ -89,15 +136,6 @@ &spi0 { status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <8000000>; - reg = <0>; - }; -}; - -&spi0 { - status = "okay"; spi@0 { compatible = "spi-mux"; mux-controls = <&mux>; @@ -128,15 +166,6 @@ microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>; }; -&axi { - i2c0_imux: i2c0-imux@0 { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c0>; - }; -}; - &i2c0_imux { pinctrl-names = "i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4", @@ -146,67 +175,28 @@ pinctrl-2 = <&i2cmux_s31>; pinctrl-3 = <&i2cmux_s32>; pinctrl-4 = <&i2cmux_pins_i>; - i2c_sfp1: i2c_sfp1 { + i2c_sfp1: i2c@0 { reg = <0x0>; #address-cells = <1>; #size-cells = <0>; }; - i2c_sfp2: i2c_sfp2 { + i2c_sfp2: i2c@1 { reg = <0x1>; #address-cells = <1>; #size-cells = <0>; }; - i2c_sfp3: i2c_sfp3 { + i2c_sfp3: i2c@2 { reg = <0x2>; #address-cells = <1>; #size-cells = <0>; }; - i2c_sfp4: i2c_sfp4 { + i2c_sfp4: i2c@3 { reg = <0x3>; #address-cells = <1>; #size-cells = <0>; }; }; -&axi { - sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; - }; - sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; - tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; - }; - sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; - tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; - }; - sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; - tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; - }; -}; - &mdio0 { status = "okay"; phy0: ethernet-phy@0 { |