diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi new file mode 100644 index 000000000000..800e0747a2f7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + }; + + flash-led-controller { + compatible = "sgmicro,sgm3140"; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_front_flash_default>; + pinctrl-names = "default"; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-0 { + gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + retain-state-suspended; + }; + + led-1 { + gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + retain-state-suspended; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@68 { + compatible = "invensense,icm20608"; + reg = <0x68>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&accelerometer_default>; + pinctrl-names = "default"; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen: touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + vcc-supply = <&pm8916_l17>; + iovcc-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_pwm { + pinctrl-0 = <&pwm_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + non-removable; + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + accelerometer_default: accelerometer-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + camera_front_flash_default: camera-front-flash-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_leds_default: gpio-leds-default-state { + pins = "gpio36", "gpio69"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4-state { + pins = "mpp4"; + function = "digital"; + power-source = <PM8916_MPP_VPH>; + output-low; + qcom,dtest = <1>; + }; +}; |