diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 59 |
1 files changed, 42 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 0c22f3efec20..6af99116c715 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -51,6 +51,8 @@ #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>, + <&tlmm 58 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -329,12 +331,18 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l10e_2p9: ldo10 { regulator-min-microvolt = <2904000>; regulator-max-microvolt = <2904000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l16e_3p0: ldo16 { @@ -350,49 +358,58 @@ zap-shader { memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; }; }; &i2c1 { clock-frequency = <100000>; - pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; + pinctrl-0 = <&i2c1_active>; pinctrl-names = "default"; status = "okay"; - hid@10 { + touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; }; }; &i2c7 { - clock-frequency = <100000>; + clock-frequency = <1000000>; - pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; + pinctrl-0 = <&i2c7_active>; pinctrl-names = "default"; status = "okay"; - hid@5 { + keyboard@5 { compatible = "hid-over-i2c"; reg = <0x5>; hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kb_int_default>; + pinctrl-names = "default"; }; - hid@2c { + touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tp_int_default>; + pinctrl-names = "default"; }; }; @@ -669,14 +686,6 @@ drive-strength = <2>; }; - i2c1_hid_active: i2c1-hid-active-state { - pins = "gpio122"; - function = "gpio"; - - bias-pull-up; - drive-strength = <2>; - }; - i2c7_active: i2c7-active-state { pins = "gpio98", "gpio99"; function = "qup7"; @@ -685,8 +694,8 @@ drive-strength = <2>; }; - i2c7_hid_active: i2c7-hid-active-state { - pins = "gpio37", "gpio24"; + kb_int_default: kb-int-default-state { + pins = "gpio37"; function = "gpio"; bias-pull-up; @@ -718,6 +727,22 @@ }; }; + tp_int_default: tp-int-default-state { + pins = "gpio24"; + function = "gpio"; + + bias-pull-up; + drive-strength = <2>; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio122"; + function = "gpio"; + + bias-pull-up; + drive-strength = <2>; + }; + usbprim_sbu_default: usbprim-sbu-state { oe-n-pins { pins = "gpio152"; |