diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts')
-rw-r--r-- | arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts index 2b9a19bb1c5d..9a1917b87f61 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts +++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts @@ -5,10 +5,31 @@ * Copyright (C) 2023 Renesas Electronics Corp. * Copyright (C) 2024 Glider bv */ +/* + * [How to use Sound] + * + * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture + * at the same time. You need to switch the direction which is controlled + * by the GP0_01 pin via amixer. + * + * Playback (CN9500) + * > amixer set "MUX" "Playback" // for GP0_01 + * > amixer set "DAC 1" 85% + * > aplay xxx.wav + * + * Capture (CN9501) + * > amixer set "MUX" "Capture" // for GP0_01 + * > amixer set "Mic 1" 80% + * > amixer set "ADC 1" on + * > amixer set 'ADC 1' 80% + * > arecord xxx hoge.wav + */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "r8a779h0.dtsi" @@ -26,11 +47,74 @@ ethernet0 = &avb0; }; + can_transceiver0: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <5000000>; + }; + chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:921600n8"; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -59,6 +143,24 @@ regulator-boot-on; regulator-always-on; }; + + sound_mux: sound-mux { + compatible = "simple-audio-mux"; + mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + state-labels = "Playback", "Capture"; + }; + + sound_card: sound { + compatible = "audio-graph-card2"; + label = "rcar-sound"; + aux-devs = <&sound_mux>; // for GP0_01 + + links = <&rsnd_port>; // AK4619 Audio Codec + }; +}; + +&audio_clkin { + clock-frequency = <24576000>; }; &avb0 { @@ -79,6 +181,25 @@ }; }; +&can_clk { + clock-frequency = <40000000>; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + phys = <&can_transceiver0>; + }; + + channel1 { + status = "okay"; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -87,6 +208,15 @@ clock-frequency = <32768>; }; +&gpio1 { + audio-power-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "Audio-Power"; + }; +}; + &hscif0 { pinctrl-0 = <&hscif0_pins>; pinctrl-names = "default"; @@ -139,6 +269,29 @@ }; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + codec@10 { + compatible = "asahi-kasei,ak4619"; + reg = <0x10>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + #sound-dai-cells = <0>; + port { + ak4619_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; +}; + &mmc0 { pinctrl-0 = <&mmc_pins>; pinctrl-1 = <&mmc_pins>; @@ -178,6 +331,21 @@ }; }; + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; + hscif0_pins: hscif0 { groups = "hscif0_data", "hscif0_ctrl"; function = "hscif0"; @@ -193,6 +361,16 @@ function = "i2c0"; }; + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; @@ -213,6 +391,40 @@ groups = "scif_clk2"; function = "scif_clk2"; }; + + sound_clk_pins: sound_clk { + groups = "audio_clkin", "audio_clkout"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi_ctrl", "ssi_data"; + function = "ssi"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* audio_clkout */ + clock-frequency = <12288000>; + + ports { + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&ak4619_endpoint>; + bitclock-master; + frame-master; + + /* see above [How to use Sound] */ + playback = <&ssi0>; + capture = <&ssi0>; + }; + }; + }; }; &rpc { |