diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 104 |
1 files changed, 100 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts index c40ad67cee01..e06a3b178b34 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts @@ -24,6 +24,8 @@ aliases { ethernet0 = &cpsw_port1; + ethernet1 = &icssg1_emac0; + ethernet2 = &icssg1_emac1; i2c1 = &mcu_i2c0; mmc1 = &sdhci1; serial0 = &mcu_uart0; @@ -71,6 +73,66 @@ }; }; + icssg1_eth: icssg1-eth { + compatible = "ti,am642-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&pru_icssg1_rgmii1_pins>, <&pru_icssg1_rgmii2_pins>; + interrupt-parent = <&icssg1_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */ + <&main_pktdma 0xc201 15>, /* egress slice 0 */ + <&main_pktdma 0xc202 15>, /* egress slice 0 */ + <&main_pktdma 0xc203 15>, /* egress slice 0 */ + <&main_pktdma 0xc204 15>, /* egress slice 1 */ + <&main_pktdma 0xc205 15>, /* egress slice 1 */ + <&main_pktdma 0xc206 15>, /* egress slice 1 */ + <&main_pktdma 0xc207 15>, /* egress slice 1 */ + <&main_pktdma 0x4200 15>, /* ingress slice 0 */ + <&main_pktdma 0x4201 15>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + sram = <&oc_sram>; + firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am64x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf"; + ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + ti,mii-g-rt = <&icssg1_mii_g_rt>; + ti,mii-rt = <&icssg1_mii_rt>; + ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + icssg1_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg1_phy0c>; + phy-mode = "rgmii-id"; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + icssg1_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg1_phy03>; + phy-mode = "rgmii-id"; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + fan0: pwm-fan { compatible = "pwm-fan"; pinctrl-names = "default"; @@ -119,15 +181,13 @@ &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&cpsw_pins>; + status = "okay"; }; &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; -}; - -&cpsw_port2 { - status = "disabled"; + status = "okay"; }; &cpsw3g_mdio { @@ -154,6 +214,42 @@ status = "okay"; }; +&icssg1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&pru_icssg1_mdio_pins>; + status = "okay"; + + /* phy-mode is fixed up to rgmii-rxid by prueth driver to account for + * the SoC integration, so the only rx-internal-delay and no + * tx-internal-delay is set for the PHYs. + */ + + icssg1_phy03: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x3>; + reset-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + icssg1_phy0c: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0xc>; + reset-gpios = <&main_gpio1 51 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + + &main_gpio0 { pinctrl-names = "default"; pinctrl-0 = <&main_gpio0_digital_pins>, |