diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file mode 100644 index 000000000000..44dfbdf89277 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * https://beagley-ai.org/ + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j722s.dtsi" + +/ { + compatible = "beagle,am67a-beagley-ai", "ti,j722s"; + model = "BeagleBoard.org BeagleY-AI"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + mmc1 = &sdhci1; + rtc0 = &rtc; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vdd_sd_dv: regulator-4 { + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + bootph-all; + }; + + vsys_io_1v8: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_default>; + + led-0 { + gpios = <&main_gpio0 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "on"; + }; + }; +}; + +&main_pmx0 { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + >; + bootph-all; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 7) /* (B24) MMC1_SDCD.GPIO1_48 */ + >; + bootph-all; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; + + led_pins_default: led-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x002c, PIN_OUTPUT, 7) /* (K26) OSPI0_CSn0.GPIO0_11 */ + J722S_IOPAD(0x0030, PIN_OUTPUT, 7) /* (K23) OSPI0_CSn1.GPIO0_12 */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>; + status = "okay"; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>; + status = "okay"; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; + status = "okay"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; + status = "okay"; +}; + +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ + >; + bootph-all; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; + status = "reserved"; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <100000>; + bootph-all; + status = "okay"; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + bootph-all; + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_PHY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDDA_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + rtc: rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + disable-wp; + cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; + cd-debounce-delay-ms = <100>; + bootph-all; + ti,fails-without-test-cd; + status = "okay"; +}; |