diff options
Diffstat (limited to 'arch/arm')
1195 files changed, 61643 insertions, 26319 deletions
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild index b506622e7e23..69de6b6243c7 100644 --- a/arch/arm/Kbuild +++ b/arch/arm/Kbuild @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_FPE_NWFPE) += nwfpe/ # Put arch/arm/fastfpe/ to use this. -obj-$(CONFIG_FPE_FASTFPE) += $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/fastfpe/)) +obj-$(CONFIG_FPE_FASTFPE) += $(patsubst $(src)/%,%,$(wildcard $(src)/fastfpe/)) obj-$(CONFIG_VFP) += vfp/ obj-$(CONFIG_XEN) += xen/ obj-$(CONFIG_VDSO) += vdso/ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b14aed3a17ab..25ed6f1a7c7a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,11 +5,15 @@ config ARM select ARCH_32BIT_OFF_T select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND select ARCH_HAS_BINFMT_FLAT + select ARCH_HAS_CACHE_LINE_SIZE if OF select ARCH_HAS_CPU_CACHE_ALIASING select ARCH_HAS_CPU_FINALIZE_INIT if MMU + select ARCH_HAS_CRC32 if KERNEL_MODE_NEON + select ARCH_HAS_CRC_T10DIF if KERNEL_MODE_NEON select ARCH_HAS_CURRENT_STACK_POINTER select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DMA_ALLOC if MMU + select ARCH_HAS_DMA_OPS select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FORTIFY_SOURCE @@ -34,7 +38,9 @@ config ARM select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 + select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6 select ARCH_SUPPORTS_ATOMIC_RMW + select ARCH_SUPPORTS_CFI_CLANG select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE select ARCH_SUPPORTS_PER_VMA_LOCK select ARCH_USE_BUILTIN_BSWAP @@ -52,7 +58,6 @@ config ARM select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS select DMA_DECLARE_COHERENT select DMA_GLOBAL_POOL if !MMU - select DMA_OPS select DMA_NONCOHERENT_MMAP if MMU select EDAC_SUPPORT select EDAC_ATOMIC_SCRUB @@ -62,6 +67,7 @@ config ARM select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IRQ_IPI if SMP select GENERIC_CPU_AUTOPROBE + select GENERIC_CPU_DEVICES select GENERIC_EARLY_IOREMAP select GENERIC_IDLE_POLL_SETUP select GENERIC_IRQ_MULTI_HANDLER @@ -85,6 +91,7 @@ config ARM select HAVE_ARCH_PFN_VALID select HAVE_ARCH_SECCOMP select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT + select HAVE_ARCH_STACKLEAK select HAVE_ARCH_THREAD_STRUCT_WHITELIST select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE @@ -99,7 +106,7 @@ config ARM select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_EXIT_THREAD - select HAVE_FAST_GUP if ARM_LPAE + select HAVE_GUP_FAST if ARM_LPAE select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL select HAVE_FUNCTION_ERROR_INJECTION select HAVE_FUNCTION_GRAPH_TRACER @@ -114,6 +121,7 @@ config ARM select HAVE_KERNEL_XZ select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M select HAVE_KRETPROBES if HAVE_KPROBES + select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_CAN_USE_KEEP_IN_OVERLAY) select HAVE_MOD_ARCH_SPECIFIC select HAVE_NMI select HAVE_OPTPROBES if !THUMB2_KERNEL @@ -125,6 +133,7 @@ config ARM select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RSEQ + select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7 select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 @@ -734,7 +743,7 @@ config ARM_ERRATA_764319 bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction" depends on CPU_V7 help - This option enables the workaround for the 764319 Cortex A-9 erratum. + This option enables the workaround for the 764319 Cortex-A9 erratum. CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an unexpected Undefined Instruction exception when the DBGSWENABLE external pin is set to 0, even when the CP14 accesses are performed @@ -1233,9 +1242,9 @@ config HIGHPTE consumed by page tables. Setting this option will allow user-space 2nd level page tables to reside in high memory. -config CPU_SW_DOMAIN_PAN - bool "Enable use of CPU domains to implement privileged no-access" - depends on MMU && !ARM_LPAE +config ARM_PAN + bool "Enable privileged no-access" + depends on MMU default y help Increase kernel security by ensuring that normal kernel accesses @@ -1244,10 +1253,26 @@ config CPU_SW_DOMAIN_PAN by ensuring that magic values (such as LIST_POISON) will always fault when dereferenced. + The implementation uses CPU domains when !CONFIG_ARM_LPAE and + disabling of TTBR0 page table walks with CONFIG_ARM_LPAE. + +config CPU_SW_DOMAIN_PAN + def_bool y + depends on ARM_PAN && !ARM_LPAE + help + Enable use of CPU domains to implement privileged no-access. + CPUs with low-vector mappings use a best-efforts implementation. Their lower 1MB needs to remain accessible for the vectors, but the remainder of userspace will become appropriately inaccessible. +config CPU_TTBR0_PAN + def_bool y + depends on ARM_PAN && ARM_LPAE + help + Enable privileged no-access by disabling TTBR0 page table walks when + running in kernel mode. + config HW_PERF_EVENTS def_bool y depends on ARM_PMU @@ -1465,7 +1490,8 @@ config ARM_ATAG_DTB_COMPAT from the ATAG list and store it at run time into the appended DTB. choice - prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT + prompt "Kernel command line type" + depends on ARM_ATAG_DTB_COMPAT default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER @@ -1494,7 +1520,8 @@ config CMDLINE memory size and the root device (e.g., mem=64M root=/dev/nfs). choice - prompt "Kernel command line type" if CMDLINE != "" + prompt "Kernel command line type" + depends on CMDLINE != "" default CMDLINE_FROM_BOOTLOADER config CMDLINE_FROM_BOOTLOADER @@ -1575,6 +1602,9 @@ config ATAGS_PROC config ARCH_SUPPORTS_CRASH_DUMP def_bool y +config ARCH_DEFAULT_CRASH_DUMP + def_bool y + config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) @@ -1725,5 +1755,3 @@ config ARCH_HIBERNATION_POSSIBLE default y if ARCH_SUSPEND_POSSIBLE endmenu - -source "arch/arm/Kconfig.assembler" diff --git a/arch/arm/Kconfig.assembler b/arch/arm/Kconfig.assembler deleted file mode 100644 index 5cb31aae1188..000000000000 --- a/arch/arm/Kconfig.assembler +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -config AS_VFP_VMRS_FPINST - def_bool $(as-instr,.fpu vfpv2\nvmrs r0$(comma)FPINST) - help - Supported by binutils >= 2.24 and LLVM integrated assembler. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 7f47b4f335c3..366f162e147d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -242,6 +242,10 @@ choice depends on ARCH_BCM_5301X || ARCH_BCM_NSP select DEBUG_UART_8250 + config DEBUG_BCMBCA + bool "Kernel low-level debugging on BCMBCA UART0" + depends on ARCH_BCMBCA + config DEBUG_BCM_HR2 bool "Kernel low-level debugging on Hurricane 2 UART2" depends on ARCH_BCM_HR2 @@ -1526,7 +1530,7 @@ config DEBUG_LL_INCLUDE default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 - default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART + default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART default "mach/debug-macro.S" @@ -1640,6 +1644,7 @@ config DEBUG_UART_PHYS default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1 default 0xfed32000 if DEBUG_STIH41X_ASC2 default 0xff690000 if DEBUG_RK32_UART2 + default 0xff800640 if DEBUG_BCMBCA default 0xffc02000 if DEBUG_SOCFPGA_UART0 default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 @@ -1664,7 +1669,7 @@ config DEBUG_UART_PHYS DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || \ DEBUG_S3C64XX_UART || \ - DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ + DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART || DEBUG_STM32_UART || \ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ @@ -1734,6 +1739,7 @@ config DEBUG_UART_VIRT default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe300000 if DEBUG_BCM_KONA_UART + default 0xfe300640 if DEBUG_BCMBCA default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 @@ -1765,7 +1771,7 @@ config DEBUG_UART_VIRT DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_QCOM_UARTDM || \ DEBUG_S3C64XX_UART || \ - DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ + DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART || DEBUG_STM32_UART || \ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d82908b1b1bb..4808d3ed98e4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -130,6 +130,13 @@ endif # Accept old syntax despite ".syntax unified" AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) +# The GCC option -ffreestanding is required in order to compile code containing +# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel) +CC_FLAGS_FPU := -ffreestanding +# Enable <arm_neon.h> +CC_FLAGS_FPU += -isystem $(shell $(CC) -print-file-name=include) +CC_FLAGS_FPU += -march=armv7-a -mfloat-abi=softfp -mfpu=neon + ifeq ($(CONFIG_THUMB2_KERNEL),y) CFLAGS_ISA :=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb @@ -143,6 +150,7 @@ endif KBUILD_CPPFLAGS +=$(cpp-y) KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi CHECKFLAGS += -D__arm__ @@ -176,7 +184,6 @@ machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove -machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_GEMINI) += gemini @@ -258,13 +265,13 @@ stack_protector_prepare: prepare0 -mstack-protector-guard=tls \ -mstack-protector-guard-offset=$(shell \ awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\ - include/generated/asm-offsets.h)) + $(objtree)/include/generated/asm-offsets.h)) else stack_protector_prepare: prepare0 $(eval SSP_PLUGIN_CFLAGS := \ -fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell \ awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\ - include/generated/asm-offsets.h)) + $(objtree)/include/generated/asm-offsets.h)) $(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS)) $(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS)) endif diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index abd6a2889fd0..ba9b9a802469 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -25,8 +25,7 @@ targets := Image zImage xipImage bootpImage uImage ifeq ($(CONFIG_XIP_KERNEL),y) -cmd_deflate_xip_data = $(CONFIG_SHELL) -c \ - '$(srctree)/$(src)/deflate_xip_data.sh $< $@' +cmd_deflate_xip_data = $(CONFIG_SHELL) -c '$(src)/deflate_xip_data.sh $< $@' ifeq ($(CONFIG_XIP_DEFLATED_DATA),y) quiet_cmd_mkxip = XIPZ $@ diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile index a2934e6fd89a..f3443f7d7b02 100644 --- a/arch/arm/boot/bootp/Makefile +++ b/arch/arm/boot/bootp/Makefile @@ -5,7 +5,6 @@ # This file is included by the global makefile so that you can add your own # architecture-specific flags and dependencies. # -GCOV_PROFILE := n ifdef PHYS_OFFSET add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) ) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 726ecabcef09..945b5975fce2 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -9,6 +9,7 @@ OBJS = HEAD = head.o OBJS += misc.o decompress.o +CFLAGS_decompress.o += $(DISABLE_STACKLEAK_PLUGIN) ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y) OBJS += debug.o AFLAGS_head.o += -DDEBUG @@ -22,13 +23,6 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y) OBJS += hyp-stub.o endif -GCOV_PROFILE := n -KASAN_SANITIZE := n - -# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in. -KCOV_INSTRUMENT := n -UBSAN_SANITIZE := n - # # Architecture dependencies # diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index 3fcb3e62dc56..d411abd4310e 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -125,7 +125,7 @@ SECTIONS . = BSS_START; __bss_start = .; - .bss : { *(.bss) } + .bss : { *(.bss .bss.*) } _end = .; . = ALIGN(8); /* the stack must be 64-bit aligned */ diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile index 2d26c3397f14..d799ad153b37 100644 --- a/arch/arm/boot/dts/allwinner/Makefile +++ b/arch/arm/boot/dts/allwinner/Makefile @@ -61,6 +61,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-pocketbook-touch-lux-3.dtb \ + sun5i-a13-pocketbook-614-plus.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ sun5i-gr8-chip-pro.dtb \ @@ -198,6 +199,7 @@ DTC_FLAGS_sun8i-h3-nanopi-r1 := -@ DTC_FLAGS_sun8i-h3-orangepi-pc := -@ DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@ DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@ +DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ sun8i-a23-gt90h-v4.dtb \ @@ -214,6 +216,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-olinuxino.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ + sun8i-a33-vstar.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-bananapi-m3.dtb \ sun8i-a83t-cubietruck-plus.dtb \ @@ -259,68 +262,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-v3s-anbernic-rg-nano.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ - sun8i-v40-bananapi-m2-berry.dtb -dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a23-evb.dtb \ - sun8i-a23-gt90h-v4.dtb \ - sun8i-a23-inet86dz.dtb \ - sun8i-a23-ippo-q8h-v5.dtb \ - sun8i-a23-ippo-q8h-v1.2.dtb \ - sun8i-a23-polaroid-mid2407pxe03.dtb \ - sun8i-a23-polaroid-mid2809pxe04.dtb \ - sun8i-a23-q8-tablet.dtb \ - sun8i-a33-et-q8-v1.6.dtb \ - sun8i-a33-ga10h-v1.1.dtb \ - sun8i-a33-inet-d978-rev2.dtb \ - sun8i-a33-ippo-q8h-v1.2.dtb \ - sun8i-a33-olinuxino.dtb \ - sun8i-a33-q8-tablet.dtb \ - sun8i-a33-sinlinx-sina33.dtb \ - sun8i-a83t-allwinner-h8homlet-v2.dtb \ - sun8i-a83t-bananapi-m3.dtb \ - sun8i-a83t-cubietruck-plus.dtb \ - sun8i-a83t-tbs-a711.dtb \ - sun8i-h2-plus-bananapi-m2-zero.dtb \ - sun8i-h2-plus-libretech-all-h3-cc.dtb \ - sun8i-h2-plus-orangepi-r1.dtb \ - sun8i-h2-plus-orangepi-zero.dtb \ - sun8i-h3-bananapi-m2-plus.dtb \ - sun8i-h3-bananapi-m2-plus-v1.2.dtb \ - sun8i-h3-beelink-x2.dtb \ - sun8i-h3-libretech-all-h3-cc.dtb \ - sun8i-h3-mapleboard-mp130.dtb \ - sun8i-h3-nanopi-duo2.dtb \ - sun8i-h3-nanopi-m1.dtb\ - \ - sun8i-h3-nanopi-m1-plus.dtb \ - sun8i-h3-nanopi-neo.dtb \ - sun8i-h3-nanopi-neo-air.dtb \ - sun8i-h3-nanopi-r1.dtb \ - sun8i-h3-orangepi-2.dtb \ - sun8i-h3-orangepi-lite.dtb \ - sun8i-h3-orangepi-one.dtb \ - sun8i-h3-orangepi-pc.dtb \ - sun8i-h3-orangepi-pc-plus.dtb \ - sun8i-h3-orangepi-plus.dtb \ - sun8i-h3-orangepi-plus2e.dtb \ - sun8i-h3-orangepi-zero-plus2.dtb \ - sun8i-h3-rervision-dvk.dtb \ - sun8i-h3-zeropi.dtb \ - sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ - sun8i-r16-bananapi-m2m.dtb \ - sun8i-r16-nintendo-nes-classic.dtb \ - sun8i-r16-nintendo-super-nes-classic.dtb \ - sun8i-r16-parrot.dtb \ - sun8i-r40-bananapi-m2-ultra.dtb \ - sun8i-r40-oka40i-c.dtb \ - sun8i-s3-elimo-initium.dtb \ - sun8i-s3-lichee-zero-plus.dtb \ - sun8i-s3-pinecube.dtb \ - sun8i-t113s-mangopi-mq-r-t113.dtb \ - sun8i-t3-cqa3t-bv3.dtb \ - sun8i-v3-sl631-imx179.dtb \ - sun8i-v3s-licheepi-zero.dtb \ - sun8i-v3s-licheepi-zero-dock.dtb \ + sun8i-v3s-netcube-kumquat.dtb \ sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -329,7 +271,3 @@ dtb-$(CONFIG_MACH_SUNIV) += \ suniv-f1c100s-licheepi-nano.dtb \ suniv-f1c200s-lctech-pi.dtb \ suniv-f1c200s-popstick-v1.1.dtb -dtb-$(CONFIG_MACH_SUNIV) += \ - suniv-f1c100s-licheepi-nano.dtb \ - suniv-f1c200s-lctech-pi.dtb \ - suniv-f1c200s-popstick-v1.1.dtb diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts new file mode 100644 index 000000000000..ab8d138dc11d --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 Denis Burkov <hitechshell@mail.ru> + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "PocketBook 614 Plus"; + compatible = "pocketbook,614-plus", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "default-on"; + gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-0 { + label = "Right"; + linux,code = <KEY_NEXT>; + gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */ + }; + + key-1 { + label = "Left"; + linux,code = <KEY_PREVIOUS>; + gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ + }; + }; + + reg_3v3_mmc0: regulator-mmc0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-mmc0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */ + vin-supply = <®_vcc3v3>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-300 { + label = "Down"; + linux,code = <KEY_DOWN>; + channel = <0>; + voltage = <300000>; + }; + + button-700 { + label = "Up"; + linux,code = <KEY_UP>; + channel = <0>; + voltage = <700000>; + }; + + button-1000 { + label = "Left"; + linux,code = <KEY_LEFT>; + channel = <0>; + voltage = <1000000>; + }; + + button-1200 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <1200000>; + }; + + button-1500 { + label = "Right"; + linux,code = <KEY_RIGHT>; + channel = <0>; + voltage = <1500000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_3v3_mmc0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ +}; + +®_usb1_vbus { + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi index 3325ab07094a..2c9152b151be 100644 --- a/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi @@ -62,14 +62,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; diff --git a/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts index 5c3562b85a5b..ffbd99c176db 100644 --- a/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts @@ -77,7 +77,7 @@ }; }; - mmc0_pwrseq: mmc0_pwrseq { + mmc0_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ }; diff --git a/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts index 4192c23848c3..8c784a2c086e 100644 --- a/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts @@ -77,7 +77,7 @@ }; }; - mmc0_pwrseq: mmc0_pwrseq { + mmc0_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ }; diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts index 236ebfc06192..5bce7a32651e 100644 --- a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts @@ -109,7 +109,7 @@ }; }; - reg_vga_3v3: vga_3v3_regulator { + reg_vga_3v3: vga-3v3-regulator { compatible = "regulator-fixed"; regulator-name = "vga-3v3"; regulator-min-microvolt = <3300000>; @@ -119,7 +119,7 @@ gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ }; diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi index 5cce4918f84c..f0145d6b9c53 100644 --- a/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi @@ -179,14 +179,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <70000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; @@ -1318,7 +1318,7 @@ compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; - ar100: ar100_clk { + ar100: ar100-clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; clocks = <&rtc CLK_OSC32K>, <&osc24M>, @@ -1327,7 +1327,7 @@ clock-output-names = "ar100"; }; - ahb0: ahb0_clk { + ahb0: ahb0-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -1336,14 +1336,14 @@ clock-output-names = "ahb0"; }; - apb0: apb0_clk { + apb0: apb0-clk { compatible = "allwinner,sun6i-a31-apb0-clk"; #clock-cells = <0>; clocks = <&ahb0>; clock-output-names = "apb0"; }; - apb0_gates: apb0_gates_clk { + apb0_gates: apb0-gates-clk { compatible = "allwinner,sun6i-a31-apb0-gates-clk"; #clock-cells = <1>; clocks = <&apb0>; @@ -1353,14 +1353,14 @@ "apb0_i2c"; }; - ir_clk: ir_clk { + ir_clk: ir-clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; clocks = <&rtc CLK_OSC32K>, <&osc24M>; clock-output-names = "ir"; }; - apb0_rst: apb0_rst { + apb0_rst: apb0-rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts index 96554ab4f6d3..f63d67ec9887 100644 --- a/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts @@ -75,7 +75,7 @@ }; }; - mmc2_pwrseq: mmc2_pwrseq { + mmc2_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ }; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts index caa935ca4f19..f2d7fab9978d 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts @@ -86,7 +86,7 @@ }; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ }; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts index 52160e368304..be9b31d0f4b5 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts @@ -96,7 +96,7 @@ }; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ clocks = <&ccu CLK_OUT_A>; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts index 3def2a330598..f1e26b75cd90 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts @@ -65,7 +65,7 @@ stdout-path = "serial0:115200n8"; }; - reg_mmc3_vdd: mmc3_vdd { + reg_mmc3_vdd: regulator-mmc3-vdd { compatible = "regulator-fixed"; regulator-name = "mmc3_vdd"; regulator-min-microvolt = <3000000>; @@ -74,7 +74,7 @@ gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ }; - reg_gmac_vdd: gmac_vdd { + reg_gmac_vdd: regulator-gmac-vdd { compatible = "regulator-fixed"; regulator-name = "gmac_vdd"; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts index 20bf09b2226c..fb835730bbc4 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts @@ -14,7 +14,7 @@ model = "Olimex A20-Olimex-SOM-EVB-eMMC"; compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20"; - mmc2_pwrseq: mmc2_pwrseq { + mmc2_pwrseq: pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts index a59755a2e7a9..e8977c2fe798 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts @@ -13,7 +13,7 @@ model = "Olimex A20-SOM204-EVB-eMMC"; compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20"; - mmc2_pwrseq: mmc2_pwrseq { + mmc2_pwrseq: pwrseq-1 { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts index 54af6c18075b..a55406657449 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts @@ -65,7 +65,7 @@ }; }; - rtl_pwrseq: rtl_pwrseq { + rtl_pwrseq: pwrseq-0 { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; }; @@ -177,7 +177,7 @@ non-removable; status = "okay"; - rtl8723bs: sdio_wifi@1 { + rtl8723bs: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts index ecb91fb899ff..435a189332e8 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts @@ -82,7 +82,7 @@ }; }; - reg_axp_ipsout: axp_ipsout { + reg_axp_ipsout: regulator-axp-ipsout { compatible = "regulator-fixed"; regulator-name = "axp-ipsout"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts index 3bfae98f3cc3..29199b6a3b4a 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi index 5574299685ab..5f44f09c5545 100644 --- a/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi @@ -153,14 +153,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi index cd4bf60dbb3c..2af8382ccdf5 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi @@ -108,7 +108,7 @@ #size-cells = <1>; ranges; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -116,7 +116,7 @@ clock-output-names = "osc24M"; }; - ext_osc32k: ext_osc32k_clk { + ext_osc32k: ext-osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -733,7 +733,7 @@ compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; - ar100: ar100_clk { + ar100: ar100-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -742,7 +742,7 @@ clock-output-names = "ar100"; }; - ahb0: ahb0_clk { + ahb0: ahb0-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -751,14 +751,14 @@ clock-output-names = "ahb0"; }; - apb0: apb0_clk { + apb0: apb0-clk { compatible = "allwinner,sun8i-a23-apb0-clk"; #clock-cells = <0>; clocks = <&ahb0>; clock-output-names = "apb0"; }; - apb0_gates: apb0_gates_clk { + apb0_gates: apb0-gates-clk { compatible = "allwinner,sun8i-a23-apb0-gates-clk"; #clock-cells = <1>; clocks = <&apb0>; @@ -767,7 +767,7 @@ "apb0_i2c"; }; - apb0_rst: apb0_rst { + apb0_rst: apb0-rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts index d5f6aebd7216..0c585a6d990d 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts @@ -52,7 +52,7 @@ ethernet0 = &esp8089; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ @@ -76,7 +76,7 @@ non-removable; status = "okay"; - esp8089: sdio_wifi@1 { + esp8089: wifi@1 { compatible = "esp,esp8089"; reg = <1>; esp,crystal-26M-en = <2>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts index 9f9232a2fefb..63cb4e194a03 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts @@ -52,7 +52,7 @@ ethernet0 = &esp8089; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ @@ -69,7 +69,7 @@ non-removable; status = "okay"; - esp8089: sdio_wifi@1 { + esp8089: wifi@1 { compatible = "esp,esp8089"; reg = <1>; esp,crystal-26M-en = <2>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts index 2dfdd0a3151e..f00ce03ffc84 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts @@ -85,7 +85,7 @@ non-removable; status = "okay"; - rtl8703as: sdio_wifi@1 { + rtl8703as: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts index 065cb620aa99..162ba93f7484 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts @@ -78,7 +78,7 @@ non-removable; status = "okay"; - rtl8723bs: sdio_wifi@1 { + rtl8723bs: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi new file mode 100644 index 000000000000..ba794b842ec4 --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me> + */ + +#include "sun8i-a33.dtsi" + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + drive-strength = <40>; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp223.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts new file mode 100644 index 000000000000..9f5c29b3df46 --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "sun8i-a33-vstar-core1.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Rervision A33-Vstar"; + compatible = "rervision,a33-vstar", + "rervision,a33-core1", + "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + ethernet0 = &r8152; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + }; +}; + +&ac_power_supply { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&dai { + status = "okay"; +}; + +&ehci0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub@1 { + /* Onboard GL850G hub which needs no extra power sequence */ + compatible = "usb5e3,608"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + r8152: ethernet@4 { + /* + * Onboard Realtek RTL8152 USB Ethernet, + * with no MAC address programmed + */ + compatible = "usbbda,8152"; + reg = <4>; + }; + }; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button-191 { + label = "V+"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191011>; + }; + + button-391 { + label = "V-"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <391304>; + }; + + button-600 { + label = "BACK"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; +}; + +/* + * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same + * time, with the two being in sync. Since this is not really + * supported right now, just use the two as always on, and we will fix + * it later. + */ +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi0"; +}; + +®_dldo2 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi1"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +&sound { + /* TODO: on-board microphone */ + + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Left DAC", "DACL", + "Right DAC", "DACR", + "Headphone Jack", "HP"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + }; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi index 30fdd2703b1f..36b2d78cdab9 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi @@ -323,35 +323,35 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - gpu_alert0: gpu_alert0 { + gpu_alert0: gpu-alert0 { /* milliCelsius */ temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_alert1: cpu_alert1 { + cpu_alert1: cpu-alert1 { /* milliCelsius */ temperature = <90000>; hysteresis = <2000>; type = "hot"; }; - gpu_alert1: gpu_alert1 { + gpu_alert1: gpu-alert1 { /* milliCelsius */ temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <110000>; hysteresis = <2000>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts index 8d56b103f063..32e811fa23e2 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts @@ -95,7 +95,7 @@ gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts index 870993393fc2..d5e6ddaffbce 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts @@ -144,7 +144,7 @@ compatible = "linux,spdif-dit"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts index a7d4ca308990..43982b106a4d 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts @@ -123,7 +123,7 @@ vin-supply = <®_vbat>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi index 94eb3bfc989e..addf0cb0f465 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi @@ -164,7 +164,7 @@ ranges; /* TODO: PRCM block has a mux for this. */ - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -177,14 +177,14 @@ * It is an internal RC-based oscillator. * TODO: Its controls are in the PRCM block. */ - osc16M: osc16M_clk { + osc16M: osc16M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <16000000>; clock-output-names = "osc16M"; }; - osc16Md512: osc16Md512_clk { + osc16Md512: osc16Md512-clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <512>; @@ -1127,7 +1127,7 @@ #reset-cells = <1>; }; - r_cpucfg@1f01c00 { + cpucfg@1f01c00 { compatible = "allwinner,sun8i-a83t-r-cpucfg"; reg = <0x1f01c00 0x400>; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts index d729b7c705db..d3a7c9fa23e4 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts @@ -103,7 +103,7 @@ cpu-supply = <®_vcc1v2>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts index 3356f4210d45..79b03b31c5eb 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts @@ -43,11 +43,12 @@ /* Orange Pi R1 is based on Orange Pi Zero design */ #include "sun8i-h2-plus-orangepi-zero.dts" +/delete-node/ ®_vcc_wifi; + / { model = "Xunlong Orange Pi R1"; compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; - /delete-node/ reg_vcc_wifi; /* * Ths pin of this regulator is the same with the Wi-Fi extra @@ -89,7 +90,7 @@ vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; - rtl8189etv: sdio_wifi@1 { + rtl8189etv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts index 3706216ffb40..1b001f2ad0ef 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts @@ -80,7 +80,7 @@ }; }; - reg_vcc_wifi: reg_vcc_wifi { + reg_vcc_wifi: reg-vcc-wifi { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -105,7 +105,7 @@ states = <1100000 0>, <1300000 1>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; post-power-on-delay-ms = <200>; @@ -149,7 +149,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - xr819: sdio_wifi@1 { + xr819: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts index a6d38ecee141..5b77300307de 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts @@ -122,7 +122,7 @@ compatible = "linux,spdif-dit"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; @@ -185,7 +185,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - sdiowifi: sdio_wifi@1 { + sdiowifi: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts index 343b02b97155..2b0566d4b386 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts @@ -87,7 +87,7 @@ vin-supply = <®_vcc5v0>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; @@ -119,7 +119,7 @@ non-removable; status = "okay"; - sdio_wifi: sdio_wifi@1 { + sdio_wifi: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts index 4ba533b0340f..59bd0746acf8 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts @@ -62,7 +62,7 @@ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; @@ -132,7 +132,7 @@ non-removable; status = "okay"; - sdio_wifi: sdio_wifi@1 { + sdio_wifi: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts index 9e1a33f94cad..6d85370e04f1 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts @@ -73,7 +73,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts index 42cd1131adf3..870649760f70 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts @@ -43,7 +43,7 @@ <1300000 0x1>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts index f1f9dbead32a..d2ae47b074bf 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts @@ -105,7 +105,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ }; @@ -169,7 +169,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - rtl8189: sdio_wifi@1 { + rtl8189: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts index 305b34a321f5..6a4316a52469 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts @@ -143,7 +143,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - rtl8189ftv: sdio_wifi@1 { + rtl8189ftv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts index babf4cf1b2f6..8a49b3376dfc 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts @@ -63,7 +63,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - rtl8189ftv: sdio_wifi@1 { + rtl8189ftv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts index 561ea1d2f861..7a6444a10e25 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts @@ -92,7 +92,7 @@ regulator-max-microvolt = <3300000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi index 3d9a1524e17e..272584881bb2 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi @@ -62,7 +62,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; /* * Q8 boards use various PL# pins as wifi-en. On other boards @@ -94,7 +94,7 @@ non-removable; status = "okay"; - sdio_wifi: sdio_wifi@1 { + sdio_wifi: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts index bc394686fedb..f4bf46b35bec 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts @@ -88,7 +88,7 @@ regulator-max-microvolt = <5000000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts index 95543a9c2118..75067522ff59 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts @@ -75,7 +75,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts index 28197bbcb1d5..cd2351acc32f 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts @@ -100,7 +100,7 @@ enable-active-high; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ clocks = <&ccu CLK_OUTA>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts index 0bd1336206b8..15b0b4de626a 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts @@ -62,7 +62,7 @@ regulator-max-microvolt = <5000000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN clocks = <&ccu CLK_OUTA>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts index 20966e954eda..e0d4404b5957 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts @@ -51,7 +51,7 @@ startup-delay-us = <200000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts new file mode 100644 index 000000000000..5143cb4e7b78 --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li> + */ + +/dts-v1/; +#include "sun8i-v3s.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> + +/{ + model = "NetCube Systems Kumquat"; + compatible = "netcube,kumquat", "allwinner,sun8i-v3s"; + + aliases { + serial0 = &uart0; + ethernet0 = &emac; + rtc0 = &ds3232; + rtc1 = &rtc; /* not battery backed */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 40 MHz Crystal Oscillator on PCB */ + clk_can0: clock-can0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-user { + label = "GPIO Key User"; + linux,code = <KEY_PROG1>; + gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + led-heartbeat { + gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-mmc0-act { + gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + linux,default-trigger = "mmc0"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + }; + }; + + /* EA3036C Switching 3 Channel Regulator - Channel 2 */ + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + }; + + /* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */ + reg_vcc5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&codec { + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "MIC1", "Mic", + "Mic", "HBIAS"; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&emac { + allwinner,leds-active-low; + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom0: eeprom@50 { + compatible = "atmel,24c02"; /* actually it's a 24AA02E48 */ + reg = <0x50>; + pagesize = <16>; + read-only; + vcc-supply = <®_vcc3v3>; + + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@fa { + reg = <0xfa 0x06>; + }; + }; + + tusb320: typec@60 { + compatible = "ti,tusb320"; + reg = <0x60>; + interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>; /* PB5 */ + }; + + ds3232: rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +/* Exposed as the Flash/SD Header on the board */ +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +/* Connected to the on-board ESP32 */ +&mmc1 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +/* Disable external 32k osc as it is broken on current revision */ +&osc32k { + status = "disabled"; +}; + +&pio { + vcc-pb-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; + + gpio-line-names = "", "", "", "", // PA + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB + "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA", + "UART0_TX", "UART0_RX", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PD + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "Q12", "Q11", "Q10", "Q9", // PE + "LED_SYS0", "I1", "Q1", "Q2", + "I2", "I3", "Q3", "Q4", + "I4", "I5", "Q5", "Q6", + "I6", "I7", "Q7", "Q8", + "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST", + "ESP_nBOOT", "", "", "", + "", "", "", "", + "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF + "SD_D3", "SD_D2", "LED_SYS1", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG + "ESP_D2", "ESP_D3", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +/* Disable external 32k osc as it is broken on current revision */ +&rtc { + /delete-property/ clocks; +}; + +/* Exposed as a USB-C connector with USB-Serial converter */ +&uart0 { + pinctrl-0 = <&uart0_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* Connected to the Bootloader/Console of the ESP32 */ +&uart1 { + pinctrl-0 = <&uart1_pe_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + extcon = <&tusb320 0>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + status = "okay"; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */ + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + label = "firmware"; + spi-max-frequency = <40000000>; + }; + + can@1 { + compatible = "microchip,mcp2518fd"; + reg = <1>; + clocks = <&clk_can0>; + interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>; /* PB1 */ + spi-max-frequency = <20000000>; + vdd-supply = <®_vcc3v3>; + xceiver-supply = <®_vcc3v3>; + }; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi index e8a04476b776..f909b1d4dbca 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi @@ -98,7 +98,7 @@ #size-cells = <1>; ranges; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -106,7 +106,7 @@ clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + osc32k: osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -416,6 +416,12 @@ function = "uart0"; }; + /omit-if-no-ref/ + uart1_pe_pins: uart1-pe-pins { + pins = "PE21", "PE22"; + function = "uart1"; + }; + uart2_pins: uart2-pins { pins = "PB0", "PB1"; function = "uart2"; diff --git a/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts index 434871040aca..6575ef274453 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts @@ -94,7 +94,7 @@ enable-active-high; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ clocks = <&ccu CLK_OUTA>; diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts index c8ca8cb7f5c9..52ad95a2063a 100644 --- a/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts @@ -280,8 +280,8 @@ reg_dcdc5: dcdc5 { regulator-always-on; - regulator-min-microvolt = <1425000>; - regulator-max-microvolt = <1575000>; + regulator-min-microvolt = <1450000>; + regulator-max-microvolt = <1550000>; regulator-name = "vcc-dram"; }; diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi index 7d3f3300f431..a1ae0929cec9 100644 --- a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi @@ -196,14 +196,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: mii_phy_tx_clk { + mii_phy_tx_clk: mii-phy-tx-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: gmac_int_tx_clk { + gmac_int_tx_clk: gmac-int-tx-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts index 43896723a994..472ded0aafcf 100644 --- a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts @@ -62,6 +62,14 @@ status = "okay"; }; +&codec { + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "MIC", "Mic"; + status = "okay"; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi index 3c61d59ab5f8..e4b41bc93852 100644 --- a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/suniv-ccu-f1c100s.h> #include <dt-bindings/reset/suniv-ccu-f1c100s.h> +#include <dt-bindings/dma/sun4i-a10.h> / { #address-cells = <1>; @@ -159,6 +160,15 @@ status = "disabled"; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,suniv-f1c100s-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <18>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <2>; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -326,5 +336,19 @@ resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; + + codec: codec@1c23c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,suniv-f1c100s-codec"; + reg = <0x01c23c00 0x400>; + interrupts = <21>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 12>, + <&dma SUN4I_DMA_NORMAL 12>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_CODEC>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi index 1d1d127cf38f..873817ddb4ea 100644 --- a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi @@ -98,7 +98,7 @@ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi index 60804b0e6c56..be5f5528a118 100644 --- a/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi +++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi index ade1cd50e445..7df60515a903 100644 --- a/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi @@ -83,7 +83,7 @@ #size-cells = <1>; ranges; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -91,7 +91,7 @@ clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + osc32k: osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile index a84310780ea3..504c533b1173 100644 --- a/arch/arm/boot/dts/amlogic/Makefile +++ b/arch/arm/boot/dts/amlogic/Makefile @@ -1,6 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_MACH_MESON6) += \ - meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ meson8-minix-neo-x8.dtb \ meson8b-ec100.dtb \ diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi index 8cb0fc78b2af..28ec2c821cdc 100644 --- a/arch/arm/boot/dts/amlogic/meson.dtsi +++ b/arch/arm/boot/dts/amlogic/meson.dtsi @@ -255,8 +255,6 @@ usb0: usb@c9040000 { compatible = "snps,dwc2"; - #address-cells = <1>; - #size-cells = <0>; reg = <0xc9040000 0x40000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb0_phy>; @@ -270,8 +268,6 @@ usb1: usb@c90c0000 { compatible = "snps,dwc2"; - #address-cells = <1>; - #size-cells = <0>; reg = <0xc90c0000 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb1_phy>; diff --git a/arch/arm/boot/dts/amlogic/meson6-atv1200.dts b/arch/arm/boot/dts/amlogic/meson6-atv1200.dts deleted file mode 100644 index 98e1c94c0261..000000000000 --- a/arch/arm/boot/dts/amlogic/meson6-atv1200.dts +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT -/* - * Copyright 2014 Carlo Caione <carlo@caione.org> - */ - -/dts-v1/; -#include "meson6.dtsi" - -/ { - model = "Geniatech ATV1200"; - compatible = "geniatech,atv1200", "amlogic,meson6"; - - aliases { - serial0 = &uart_AO; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x80000000>; - }; -}; - -&uart_AO { - status = "okay"; -}; - -ðmac { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/amlogic/meson6.dtsi b/arch/arm/boot/dts/amlogic/meson6.dtsi deleted file mode 100644 index 4716030a48d0..000000000000 --- a/arch/arm/boot/dts/amlogic/meson6.dtsi +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT -/* - * Copyright 2014 Carlo Caione <carlo@caione.org> - */ - -#include "meson.dtsi" - -/ { - model = "Amlogic Meson6 SoC"; - compatible = "amlogic,meson6"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0x200>; - }; - - cpu@201 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0x201>; - }; - }; - - apb2: bus@d0000000 { - compatible = "simple-bus"; - reg = <0xd0000000 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xd0000000 0x40000>; - }; - - clk81: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - }; -}; /* end of / */ - -&efuse { - status = "disabled"; -}; - -&timer_abcde { - clocks = <&xtal>, <&clk81>; - clock-names = "xtal", "pclk"; -}; - -&uart_AO { - clocks = <&xtal>, <&clk81>, <&clk81>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_A { - clocks = <&xtal>, <&clk81>, <&clk81>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_B { - clocks = <&xtal>, <&clk81>, <&clk81>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_C { - clocks = <&xtal>, <&clk81>, <&clk81>; - clock-names = "xtal", "pclk", "baud"; -}; diff --git a/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts index c6d1c5a8a3bf..62987eadc747 100644 --- a/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts @@ -19,7 +19,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x80000000>; }; @@ -93,5 +93,6 @@ ðmac { status = "okay"; pinctrl-0 = <ð_pins>; - pnictrl-names = "default"; + pinctrl-names = "default"; + phy-mode = "rmii"; }; diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi index f57be9ae150f..847f7b1f1e96 100644 --- a/arch/arm/boot/dts/amlogic/meson8.dtsi +++ b/arch/arm/boot/dts/amlogic/meson8.dtsi @@ -196,7 +196,7 @@ }; thermal-zones { - soc { + soc-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ thermal-sensors = <&thermal_sensor>; @@ -346,17 +346,16 @@ reg = <0xe0 0x18>; }; - pinctrl_aobus: pinctrl@84 { + pinctrl_aobus: pinctrl@14 { compatible = "amlogic,meson8-aobus-pinctrl"; - reg = <0x84 0xc>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x14 0x1c>; - gpio_ao: ao-bank@14 { - reg = <0x14 0x4>, - <0x2c 0x4>, - <0x24 0x8>; + gpio_ao: bank@0 { + reg = <0x0 0x4>, + <0x18 0x4>, + <0x10 0x8>; reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -450,7 +449,11 @@ }; pwm_ef: pwm@86c0 { - compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; reg = <0x86c0 0x10>; #pwm-cells = <3>; status = "disabled"; @@ -461,18 +464,17 @@ reg = <0x8758 0x1c>; }; - pinctrl_cbus: pinctrl@9880 { + pinctrl_cbus: pinctrl@8030 { compatible = "amlogic,meson8-cbus-pinctrl"; - reg = <0x9880 0x10>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x8030 0x108>; - gpio: banks@80b0 { - reg = <0x80b0 0x28>, - <0x80e8 0x18>, - <0x8120 0x18>, - <0x8030 0x30>; + gpio: bank@80 { + reg = <0x80 0x28>, + <0xb8 0x18>, + <0xf0 0x18>, + <0x00 0x30>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -589,7 +591,7 @@ }; &ahb_sram { - ao_arc_sram: ao-arc-sram@0 { + ao_arc_sram: aoarc-sram@0 { compatible = "amlogic,meson8-ao-arc-sram"; reg = <0x0 0x8000>; pool; @@ -701,11 +703,19 @@ }; &pwm_ab { - compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; }; &pwm_cd { - compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; }; &rtc { diff --git a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts index 3da47349eaaf..236999548094 100644 --- a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts +++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts @@ -22,7 +22,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -34,8 +34,6 @@ gpio-keys { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; pal-switch { @@ -100,6 +98,10 @@ compatible = "amlogic,gx-sound-card"; model = "M8B-EC100"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; @@ -429,7 +431,7 @@ "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)", "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)", "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)", - "nWE_S1 NAND_nWE (EMMC)", "", "", "SPI_CS", + "nWE_S1 NAND_nWE (EMMC)", "", "", "", "SPI_CS", /* Bank DIF */ "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV", "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5", @@ -441,8 +443,6 @@ status = "okay"; pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&xtal>, <&xtal>; - clock-names = "clkin0", "clkin1"; }; &rtc { diff --git a/arch/arm/boot/dts/amlogic/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts index 7adedd3258c3..0bca0b33eea2 100644 --- a/arch/arm/boot/dts/amlogic/meson8b-mxq.dts +++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts @@ -22,7 +22,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -162,8 +162,6 @@ status = "okay"; pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&xtal>, <&xtal>; - clock-names = "clkin0", "clkin1"; }; &uart_AO { diff --git a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts index 941682844faf..1cd2093202ca 100644 --- a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts @@ -22,7 +22,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -347,8 +347,6 @@ status = "okay"; pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&xtal>, <&xtal>; - clock-names = "clkin0", "clkin1"; }; &rtc { @@ -378,6 +376,6 @@ compatible = "usb5e3,610"; reg = <1>; vdd-supply = <&p5v0>; - reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi index 2d9d24d3a95d..0876611ce26a 100644 --- a/arch/arm/boot/dts/amlogic/meson8b.dtsi +++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi @@ -173,7 +173,7 @@ }; thermal-zones { - soc { + soc-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ thermal-sensors = <&thermal_sensor>; @@ -308,17 +308,16 @@ reg = <0xe0 0x18>; }; - pinctrl_aobus: pinctrl@84 { + pinctrl_aobus: pinctrl@14 { compatible = "amlogic,meson8b-aobus-pinctrl"; - reg = <0x84 0xc>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x14 0x1c>; - gpio_ao: ao-bank@14 { - reg = <0x14 0x4>, - <0x2c 0x4>, - <0x24 0x8>; + gpio_ao: bank@0 { + reg = <0x0 0x4>, + <0x18 0x4>, + <0x10 0x8>; reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -404,8 +403,12 @@ }; pwm_ef: pwm@86c0 { - compatible = "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2"; reg = <0x86c0 0x10>; + clocks = <&xtal>, + <>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; #pwm-cells = <3>; status = "disabled"; }; @@ -415,18 +418,17 @@ reg = <0x8758 0x1c>; }; - pinctrl_cbus: pinctrl@9880 { + pinctrl_cbus: pinctrl@8030 { compatible = "amlogic,meson8b-cbus-pinctrl"; - reg = <0x9880 0x10>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x8030 0x108>; - gpio: banks@80b0 { - reg = <0x80b0 0x28>, - <0x80e8 0x18>, - <0x8120 0x18>, - <0x8030 0x38>; + gpio: bank@80 { + reg = <0x80 0x28>, + <0xb8 0x18>, + <0xf0 0x18>, + <0x00 0x38>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -535,7 +537,7 @@ }; &ahb_sram { - ao_arc_sram: ao-arc-sram@0 { + ao_arc_sram: aoarc-sram@0 { compatible = "amlogic,meson8b-ao-arc-sram"; reg = <0x0 0x8000>; pool; @@ -676,11 +678,19 @@ }; &pwm_ab { - compatible = "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; }; &pwm_cd { - compatible = "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; }; &rtc { diff --git a/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts index aa4d4bf70629..08aa661e17ad 100644 --- a/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts @@ -26,7 +26,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi index a79e1d1d30a7..7f62aef9ca8a 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi @@ -22,7 +22,7 @@ / { /* Introduce a fixed regulator for the new ethernet controller */ - veth: fixedregulator@0 { + veth: regulator-veth { compatible = "regulator-fixed"; regulator-name = "veth"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi index 26783d053ac7..40f7515aa068 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi @@ -103,7 +103,7 @@ }; /* PMU with one IRQ line per core */ - pmu: pmu@0 { + pmu: pmu { compatible = "arm,arm11mpcore-pmu"; interrupt-parent = <&intc>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi index fbb2258b451f..16f784da5a55 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi @@ -45,7 +45,7 @@ }; /* The voltage to the MMC card is hardwired at 3.3V */ - vmmc: fixedregulator@0 { + vmmc: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -53,13 +53,13 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -67,48 +67,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts index d99bac02232b..b9b10cbd65aa 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts @@ -63,13 +63,13 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -77,40 +77,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts index 89103d54ecc1..db1b6793cd2c 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts @@ -92,7 +92,7 @@ <0x1f000100 0x100>; }; - L2: cache-controller { + L2: cache-controller@1f002000 { compatible = "arm,l220-cache"; reg = <0x1f002000 0x1000>; interrupt-parent = <&intc_tc11mp>; @@ -163,19 +163,19 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - refclk32khz: refclk32khz { + refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -183,48 +183,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts index d3238c252b59..d2e0082245f9 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pba8.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts @@ -40,7 +40,7 @@ }; }; - pmu: pmu@0 { + pmu: pmu { compatible = "arm,cortex-a8-pmu"; interrupt-parent = <&intc>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts index 85d3968fbb91..507ad7ac4974 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts @@ -97,7 +97,7 @@ interrupts = <1 14 0xf04>; }; - pmu: pmu@0 { + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&intc>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi index ec1507c5147c..e625403a9456 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi @@ -62,19 +62,19 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - refclk32khz: refclk32khz { + refclk32khz: clock-32768 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -82,48 +82,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts index 367850ea0912..db13e09f2fab 100644 --- a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts +++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts @@ -54,7 +54,7 @@ }; /* Also used for the Smart Card Interface SCI */ - impd1_uartclk: clock@1_4 { + impd1_uartclk: clock-uart { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <4>; @@ -64,7 +64,7 @@ }; /* For the SSP the clock is divided by 64 */ - impd1_sspclk: clock@1_64 { + impd1_sspclk: clock-ssp { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <64>; diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts index d9927d3181dc..9b6a1dbaf265 100644 --- a/arch/arm/boot/dts/arm/integratorap.dts +++ b/arch/arm/boot/dts/arm/integratorap.dts @@ -57,22 +57,14 @@ }; /* 24 MHz chrystal on the Integrator/AP development board */ - xtal24mhz: xtal24mhz@24M { + xtal24mhz: pclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - pclk: pclk@0 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* The UART clock is 14.74 MHz divided by an ICS525 */ - uartclk: uartclk@14.74M { + uartclk: clock-14745600 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <14745600>; @@ -81,7 +73,7 @@ core-module@10000000 { /* 24 MHz chrystal on the core module */ - cm24mhz: cm24mhz@24M { + cm24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/arch/arm/boot/dts/arm/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts index c011333eb165..8ad1a8957ace 100644 --- a/arch/arm/boot/dts/arm/integratorcp.dts +++ b/arch/arm/boot/dts/arm/integratorcp.dts @@ -47,14 +47,14 @@ */ /* The codec chrystal operates at 24.576 MHz */ - xtal_codec: xtal24.576@24.576M { + xtal_codec: clock-24576000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24576000>; }; /* The chrystal is divided by 2 by the codec for the AACI bit clock */ - aaci_bitclk: aaci_bitclk@12.288M { + aaci_bitclk: clock-12288000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <2>; @@ -63,21 +63,21 @@ }; /* This is a 25MHz chrystal on the base board */ - xtal25mhz: xtal25mhz@25M { + xtal25mhz: clock-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; }; /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */ - uartclk: uartclk@14.74M { + uartclk: clock-14745600 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <14745600>; }; /* Actually sysclk I think */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; @@ -85,7 +85,7 @@ core-module@10000000 { /* 24 MHz chrystal on the core module */ - cm24mhz: cm24mhz@24M { + cm24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -131,7 +131,7 @@ }; /* The timer clock is the 24 MHz oscillator divided to 1MHz */ - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; diff --git a/arch/arm/boot/dts/arm/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi index ce308820765b..e240bc8aa605 100644 --- a/arch/arm/boot/dts/arm/mps2.dtsi +++ b/arch/arm/boot/dts/arm/mps2.dtsi @@ -48,37 +48,37 @@ #address-cells = <1>; #size-cells = <1>; - oscclk0: clk-osc0 { + oscclk0: clock-50000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; }; - oscclk1: clk-osc1 { + oscclk1: clock-24576000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; }; - oscclk2: clk-osc2 { + oscclk2: clock-25000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - cfgclk: clk-cfg { + cfgclk: clock-5000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <5000000>; }; - spicfgclk: clk-spicfg { + spicfgclk: clock-75000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <75000000>; }; - sysclk: clk-sys { + sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys { compatible = "fixed-factor-clock"; clocks = <&oscclk0>; #clock-cells = <0>; @@ -86,7 +86,7 @@ clock-mult = <1>; }; - audmclk: clk-audm { + audmclk: clk-12388000 { compatible = "fixed-factor-clock"; clocks = <&oscclk1>; #clock-cells = <0>; @@ -94,7 +94,7 @@ clock-mult = <1>; }; - audsclk: clk-auds { + audsclk: clk-3072000 { compatible = "fixed-factor-clock"; clocks = <&oscclk1>; #clock-cells = <0>; @@ -102,38 +102,6 @@ clock-mult = <1>; }; - spiclcd: clk-cpiclcd { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - spicon: clk-spicon { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - i2cclcd: clk-i2cclcd { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - i2caud: clk-i2caud { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - soc { compatible = "simple-bus"; ranges; diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts index de45aa99e260..635ab9268899 100644 --- a/arch/arm/boot/dts/arm/versatile-ab.dts +++ b/arch/arm/boot/dts/arm/versatile-ab.dts @@ -24,7 +24,7 @@ reg = <0x0 0x08000000>; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -142,14 +142,14 @@ }; /* OSC1 on AB, OSC4 on PB */ - osc1: cm_aux_osc@24M { + osc1: clock-osc { #clock-cells = <0>; compatible = "arm,versatile-cm-auxosc"; clocks = <&xtal24mhz>; }; /* The timer clock is the 24 MHz oscillator divided to 1MHz */ - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -157,7 +157,7 @@ clocks = <&xtal24mhz>; }; - pclk: pclk@24M { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi index 8af4b77fe655..158b3923eae3 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi @@ -20,7 +20,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> / { - v2m_fixed_3v3: fixed-regulator-0 { + v2m_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -28,21 +28,21 @@ regulator-always-on; }; - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi index c5e92f6d2fcd..be03f2a8a57a 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi @@ -351,7 +351,7 @@ }; }; - v2m_fixed_3v3: fixed-regulator-0 { + v2m_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -359,21 +359,21 @@ regulator-always-on; }; - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -436,7 +436,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* MCC static memory clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -445,7 +445,7 @@ clock-output-names = "v2m:oscclk0"; }; - v2m_oscclk1: oscclk1 { + v2m_oscclk1: clock-controller-1 { /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -454,7 +454,7 @@ clock-output-names = "v2m:oscclk1"; }; - v2m_oscclk2: oscclk2 { + v2m_oscclk2: clock-controller-2 { /* IO FPGA peripheral clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -463,7 +463,7 @@ clock-output-names = "v2m:oscclk2"; }; - volt-vio { + regulator-vio { /* Logic level voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts index 679537e17ff5..5a91e936edef 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts @@ -142,7 +142,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* CPU PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -151,7 +151,7 @@ clock-output-names = "oscclk0"; }; - oscclk4 { + clock-controller-4 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -160,7 +160,7 @@ clock-output-names = "oscclk4"; }; - hdlcd_clk: oscclk5 { + hdlcd_clk: clock-controller-5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -169,7 +169,7 @@ clock-output-names = "oscclk5"; }; - smbclk: oscclk6 { + smbclk: clock-controller-6 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -178,7 +178,7 @@ clock-output-names = "oscclk6"; }; - sys_pll: oscclk7 { + sys_pll: clock-controller-7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -187,7 +187,7 @@ clock-output-names = "oscclk7"; }; - oscclk8 { + clock-controller-8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -196,7 +196,7 @@ clock-output-names = "oscclk8"; }; - volt-cores { + regulator-cores { /* CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts index 511e87cc2bc5..6ef23c53d2d8 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts @@ -253,7 +253,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* A15 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -262,7 +262,7 @@ clock-output-names = "oscclk0"; }; - oscclk1 { + clock-controller-1 { /* A15 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -271,7 +271,7 @@ clock-output-names = "oscclk1"; }; - oscclk2 { + clock-controller-2 { /* A7 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -280,7 +280,7 @@ clock-output-names = "oscclk2"; }; - oscclk3 { + clock-controller-3 { /* A7 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -289,7 +289,7 @@ clock-output-names = "oscclk3"; }; - oscclk4 { + clock-controller-4 { /* External AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -298,7 +298,7 @@ clock-output-names = "oscclk4"; }; - hdlcd_clk: oscclk5 { + hdlcd_clk: clock-controller-5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -307,7 +307,7 @@ clock-output-names = "oscclk5"; }; - smbclk: oscclk6 { + smbclk: clock-controller-6 { /* Static memory controller clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -316,7 +316,7 @@ clock-output-names = "oscclk6"; }; - oscclk7 { + clock-controller-7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -325,7 +325,7 @@ clock-output-names = "oscclk7"; }; - oscclk8 { + clock-controller-8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -334,7 +334,7 @@ clock-output-names = "oscclk8"; }; - volt-a15 { + regulator-a15 { /* A15 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -345,7 +345,7 @@ label = "A15 Vcore"; }; - volt-a7 { + regulator-a7 { /* A7 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts index ff1f9a1bcfcf..e3896253f33e 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts @@ -145,7 +145,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - cpu_clk: oscclk0 { + cpu_clk: clock-controller-0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -154,7 +154,7 @@ clock-output-names = "oscclk0"; }; - axi_clk: oscclk1 { + axi_clk: clock-controller-1 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -163,7 +163,7 @@ clock-output-names = "oscclk1"; }; - oscclk2 { + clock-controller-2 { /* DDR2 */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -172,7 +172,7 @@ clock-output-names = "oscclk2"; }; - hdlcd_clk: oscclk3 { + hdlcd_clk: clock-controller-3 { /* HDLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -181,7 +181,7 @@ clock-output-names = "oscclk3"; }; - oscclk4 { + clock-controller-4 { /* Test chip gate configuration */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -190,7 +190,7 @@ clock-output-names = "oscclk4"; }; - smbclk: oscclk5 { + smbclk: clock-controller-5 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts index 8bf35666412b..43a5a4ab6ff0 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts @@ -187,7 +187,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0: extsaxiclk { + oscclk0: clock-controller-0 { /* ACLK clock to the AXI master port on the test chip */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -196,7 +196,7 @@ clock-output-names = "extsaxiclk"; }; - oscclk1: clcdclk { + oscclk1: clock-controller-1 { /* Reference clock for the CLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -205,7 +205,7 @@ clock-output-names = "clcdclk"; }; - smbclk: oscclk2: tcrefclk { + smbclk: oscclk2: clock-controller-2 { /* Reference clock for the test chip internal PLLs */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -214,7 +214,7 @@ clock-output-names = "tcrefclk"; }; - volt-vd10 { + regulator-vd10 { /* Test Chip internal logic voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -223,7 +223,7 @@ label = "VD10"; }; - volt-vd10-s2 { + regulator-vd10-s2 { /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; @@ -232,7 +232,7 @@ label = "VD10_S2"; }; - volt-vd10-s3 { + regulator-vd10-s3 { /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 2>; @@ -241,7 +241,7 @@ label = "VD10_S3"; }; - volt-vcc1v8 { + regulator-vcc1v8 { /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 3>; @@ -250,7 +250,7 @@ label = "VCC1V8"; }; - volt-ddr2vtt { + regulator-ddr2vtt { /* DDR2 SDRAM VTT termination voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 4>; @@ -259,7 +259,7 @@ label = "DDR2VTT"; }; - volt-vcc3v3 { + regulator-vcc3v3 { /* Local board supply for miscellaneous logic external to the Test Chip */ arm,vexpress-sysreg,func = <2 5>; compatible = "arm,vexpress-volt"; diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index d3ac20e316d0..2e5f4833a073 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -6,20 +6,26 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-amd-daytonax.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ + aspeed-bmc-ampere-mtjefferson.dtb \ aspeed-bmc-ampere-mtmitchell.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ + aspeed-bmc-asrock-e3c256d4i.dtb \ aspeed-bmc-asrock-romed8hm3.dtb \ + aspeed-bmc-asrock-spc621d8hm3.dtb \ + aspeed-bmc-asrock-x570d4u.dtb \ + aspeed-bmc-asus-x4tf.dtb \ aspeed-bmc-bytedance-g220a.dtb \ aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ - aspeed-bmc-facebook-cloudripper.dtb \ + aspeed-bmc-facebook-catalina.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ aspeed-bmc-facebook-fuji.dtb \ aspeed-bmc-facebook-galaxy100.dtb \ aspeed-bmc-facebook-greatlakes.dtb \ - aspeed-bmc-facebook-minerva-cmc.dtb \ + aspeed-bmc-facebook-harma.dtb \ + aspeed-bmc-facebook-minerva.dtb \ aspeed-bmc-facebook-minipack.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ @@ -28,11 +34,15 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-facebook-yosemite4.dtb \ + aspeed-bmc-ibm-blueridge.dtb \ aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ + aspeed-bmc-ibm-fuji.dtb \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-1s4u.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ + aspeed-bmc-ibm-sbp1.dtb \ + aspeed-bmc-ibm-system1.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-inspur-nf5280m6.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts index 8ab5f301f926..31c5d319aa0a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts @@ -49,6 +49,11 @@ */ i2c80 = &nvme_m2_0; i2c81 = &nvme_m2_1; + + /* + * i2c bus 82 assigned to OCP slot + */ + i2c82 = &ocpslot; }; chosen { @@ -420,6 +425,17 @@ reg = <0x70>; i2c-mux-idle-disconnect; + ocpslot: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + nvmeslot_0_7: i2c@3 { #address-cells = <1>; #size-cells = <0>; @@ -672,10 +688,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts new file mode 100644 index 000000000000..c435359a4bd9 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts @@ -0,0 +1,622 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright 2024 Ampere Computing LLC. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt. Jefferson BMC"; + compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600"; + + aliases { + i2c20 = &i2c4_bus70_chn0; + i2c22 = &i2c4_bus70_chn2; + + /* + * I2C OCP alias port + */ + i2c30 = &ocpslot; + + /* + * I2C NVMe alias port + */ + i2c48 = &nvmeslot_0; + i2c49 = &nvmeslot_1; + i2c50 = &nvmeslot_2; + i2c51 = &nvmeslot_3; + i2c52 = &nvmeslot_4; + i2c53 = &nvmeslot_5; + i2c54 = &nvmeslot_6; + i2c55 = &nvmeslot_7; + i2c56 = &nvmeslot_8; + i2c57 = &nvmeslot_9; + i2c58 = &nvmeslot_10; + i2c59 = &nvmeslot_11; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + voltage_mon_reg: voltage-mon-regulator { + compatible = "regulator-fixed"; + regulator-name = "ltc2497_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + led-bmc-ready { + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; + }; + + led-sw-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; + }; + + led-identify { + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; + }; + + led-fault { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, + <&adc_i2c_2 0>, <&adc_i2c_2 1>, + <&adc_i2c_2 2>, <&adc_i2c_2 3>, + <&adc_i2c_2 4>, <&adc_i2c_2 5>, + <&adc_i2c_2 6>, <&adc_i2c_2 7>, + <&adc_i2c_2 8>, <&adc_i2c_2 9>, + <&adc_i2c_2 10>, <&adc_i2c_2 11>, + <&adc_i2c_2 12>, <&adc_i2c_2 13>, + <&adc_i2c_2 14>, <&adc_i2c_2 15>, + <&adc_i2c_0 0>, <&adc_i2c_0 1>, + <&adc_i2c_0 2>, <&adc_i2c_0 3>, + <&adc_i2c_0 4>, <&adc_i2c_0 5>, + <&adc_i2c_0 6>, <&adc_i2c_0 7>, + <&adc_i2c_0 8>, <&adc_i2c_0 9>, + <&adc_i2c_0 10>, <&adc_i2c_0 11>, + <&adc_i2c_0 12>; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <20000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + bus-frequency = <1000000>; + multi-master; + mctp-controller; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; +}; + +&i2c4 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c4_bus70_chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + pagesize = <32>; + }; + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + temperature-sensor@4a{ + compatible = "ti,tmp75"; + reg = <0x4a>; + }; + temperature-sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + status = "disabled"; + }; + channel@1 { + reg = <0x1>; + status = "disabled"; + }; + channel@2 { + reg = <0x2>; + status = "disabled"; + }; + channel@3 { + reg = <0x3>; + status = "disabled"; + }; + channel@4 { + reg = <0x4>; + }; + }; + temperature-sensor@4d { + compatible = "ti,tmp75"; + reg = <0x4d>; + }; + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + temperature-sensor@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + channel@1 { /* RTD1 */ + reg = <1>; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + }; + adc_i2c_0: adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + }; + + i2c4_bus70_chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + adc_i2c_2: adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + nvmeslot_8: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + nvmeslot_9: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + nvmeslot_10: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + nvmeslot_11: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + nvmeslot_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; + + i2c-mux@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c-mux-idle-disconnect; + + ocpslot: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + status = "disabled"; + }; + channel@1 { + reg = <0x1>; + }; + }; + }; + + nvmeslot_0: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_1: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_2: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_3: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; +}; + +&i2c8 { + status = "okay"; + + fan-controller@5c { + compatible = "onnn,adt7462"; + reg = <0x5c>; + }; +}; + +&i2c9 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + temperature-sensor@18 { + compatible = "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + temperature-sensor@1a { + compatible = "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c14 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + bmc_ast2600_cpu: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; +}; + +&i2c15 { + status = "okay"; + gpio_expander1: gpio-expander@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "presence-ocp1","presence-ocp2", + "","", + "","", + "","", + "","", + "","", + "","", + "",""; + }; +}; + +&adc0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n", + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete", + "chassis-id-sel", + /*C0-C7*/ "s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel", + "spd-sel", + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n", + "","","","", + /*E0-E7*/ "eth-phy-rst-n","eth-phy-int-n","","","","","","", + /*F0-F7*/ "s0-pcp-oc-warn-n","","power-chassis-control", + "cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","", + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr", + "led-fp-sta-amb", + /*H0-H7*/ "jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","", + "","", + /*I0-I7*/ "","","","","","","power-button","rtc-battery-voltage-read-enable", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","reset-button","","","", + /*M0-M7*/ "nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock", + "","","", + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb", + "jtag-dbgr-prsnt-n","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n", + "led-bmc-hb", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","identify-button","led-identify","","spi-nor-access","host0-ready","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", + "host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n", + "host0-shd-ack-n","s0-overtemp-n", + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","vrd-prg-en-n","","","","host0-special-boot", + /*Z0-Z7*/ "","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ocp-aux-pwren"; + }; + +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel", + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1", + "","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","",""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts index 7b540880cef9..2b336aa0146d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts @@ -16,6 +16,32 @@ serial8 = &uart9; /* + * I2C temperature alias port + */ + i2c20 = &i2c4_bus70_chn0; + i2c21 = &i2c4_bus70_chn1; + i2c22 = &i2c4_bus70_chn2; + i2c23 = &i2c4_bus70_chn3; + + /* + * i2c bus 30-31 assigned to OCP slot 0-1 + */ + i2c30 = &ocpslot_0; + i2c31 = &ocpslot_1; + + /* + * i2c bus 32-33 assigned to Riser slot 0-1 + */ + i2c32 = &i2c_riser0; + i2c33 = &i2c_riser1; + + /* + * i2c bus 38-39 assigned to FRU on Riser slot 0-1 + */ + i2c38 = &i2c_riser0_chn_0; + i2c39 = &i2c_riser1_chn_0; + + /* * I2C NVMe alias port */ i2c100 = &backplane_0; @@ -87,6 +113,37 @@ }; }; + leds { + compatible = "gpio-leds"; + /* + * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when + * watchdog timeout. + */ + led-bmc-ready { + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; + }; + + led-sw-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; + }; + + led-identify { + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; + }; + + led-fault { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + + led-fan-fault { + gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>; + }; + + led-psu-fault { + gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>; + }; + }; + voltage_mon_reg: voltage-mon-regulator { compatible = "regulator-fixed"; regulator-name = "ltc2497_reg"; @@ -515,6 +572,80 @@ #size-cells = <0>; reg = <0x70>; i2c-mux-idle-disconnect; + + ocpslot_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_0_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + ocpslot_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + ocpslot_1_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + i2c_riser0: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + i2c_riser0_chn_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + }; + }; + + i2c_riser1: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + i2c_riser1_chn_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + }; + }; }; }; @@ -546,6 +677,12 @@ #size-cells = <0>; #gpio-cells = <2>; + gpio-line-names = + "ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n", + "","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n", + "","","","", + "","","",""; + bmc-ocp0-en-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_LOW>; @@ -553,6 +690,16 @@ line-name = "bmc-ocp0-en-n"; }; }; + + fan-controller0@20 { + compatible = "maxim,max31790"; + reg = <0x20>; + }; + + fan-controller1@2f { + compatible = "maxim,max31790"; + reg = <0x2f>; + }; }; &i2c9 { @@ -790,6 +937,10 @@ }; }; +&i2c10 { + status = "okay"; +}; + &i2c11 { status = "okay"; ssif-bmc@10 { @@ -812,8 +963,26 @@ }; }; +&i2c15 { + status = "okay"; + gpio_expander1: gpio-expander@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "fan-fault","psu-fault", + "","", + "","", + "gpi0","gpi1", + "","", + "","", + "","", + "",""; + }; +}; + &adc0 { - ref_voltage = <2500>; status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts index 7c6af7f226e7..29c68c37e7f5 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -200,10 +200,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &gpio { pin_gpio_c7 { gpio-hog; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts index c4b2efbfdf56..bb2e6ef609af 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts @@ -83,6 +83,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; }; &i2c1 { @@ -103,6 +106,12 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x57>; pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts new file mode 100644 index 000000000000..9d00ce9475f2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/watchdog/aspeed-wdt.h> + +/{ + model = "ASRock E3C256D4I BMC"; + compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + + i2c20 = &i2c2mux0ch0; + i2c21 = &i2c2mux0ch1; + i2c22 = &i2c2mux0ch2; + i2c23 = &i2c2mux0ch3; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + /* BMC heartbeat */ + led-0 { + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "timer"; + }; + + /* system fault */ + led-1 { + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + panic-indicator; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <100000000>; /* 100 MHz */ +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c2mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c2mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c2mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c2mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + vrm@60 { + compatible = "isil,isl69269"; + reg = <0x60>; + }; +}; + +&i2c12 { + status = "okay"; + + /* FRU eeprom */ + eeprom@57 { + compatible = "st,24c128", "atmel,24c128"; + reg = <0x57>; + pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; + }; +}; + +&video { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&peci0 { + status = "okay"; +}; + +&wdt1 { + aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>; +}; + +&wdt2 { + aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default /* CPU */ + &pinctrl_pwm2_default /* rear */ + &pinctrl_pwm4_default>; /* front */ + + /* CPU */ + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + /* rear */ + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + /* front */ + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "", + /* B */ "", "", "", "", "", "", "", "", + /* C */ "", "", "", "", "", "", "", "", + /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", + "", "", "", "", + /* E */ "", "", "", "", "", "", "", "", + /* F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "", + "", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL", + /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2", + "", "", "", "", + /* H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N", + "MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", + /* I */ "", "", "", "", "", "", "", "", + /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "", "", "", "", "", "", "", "", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "", "", "", "", "", "", "", "", + /* Q */ "", "", "", "", "", "", "", "", + /* R */ "", "", "", "", "", "", "", "", + /* S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "", + /* Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N", + "", "", "", "", + /* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "", + "", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N", + /* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "", + /* AC */ "", "", "", "", "", "", "", ""; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ + &pinctrl_adc1_default /* 5VSB */ + &pinctrl_adc2_default /* CPU1 */ + &pinctrl_adc3_default /* VCCSA */ + &pinctrl_adc4_default /* VCCM */ + &pinctrl_adc5_default /* V10M */ + &pinctrl_adc6_default /* VCCIO */ + &pinctrl_adc7_default /* VCCGT */ + &pinctrl_adc8_default /* VPPM */ + &pinctrl_adc9_default /* BAT */ + &pinctrl_adc10_default /* 3V */ + &pinctrl_adc11_default /* 5V */ + &pinctrl_adc12_default /* 12V */ + &pinctrl_adc13_default /* GND */ + &pinctrl_adc14_default /* GND */ + &pinctrl_adc15_default>; /* GND */ +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts index 4554abf0c7cd..6dd221644dc6 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts @@ -71,6 +71,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; }; &i2c0 { @@ -98,14 +101,14 @@ /* IPB PMIC */ lm25066@40 { - compatible = "lm25066"; + compatible = "ti,lm25066"; reg = <0x40>; shunt-resistor-micro-ohms = <1000>; }; /* 12VSB PMIC */ lm25066@41 { - compatible = "lm25066"; + compatible = "ti,lm25066"; reg = <0x41>; shunt-resistor-micro-ohms = <10000>; }; @@ -131,6 +134,12 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x50>; pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts new file mode 100644 index 000000000000..c4097e4f2ca4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> + +/{ + model = "ASRock SPC621D8HM3 BMC"; + compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + + i2c20 = &i2c1mux0ch0; + i2c21 = &i2c1mux0ch1; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + /* BMC heartbeat */ + led-0 { + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "timer"; + }; + + /* system fault */ + led-1 { + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + panic-indicator; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; /* 50 MHz */ +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&uart5 { + status = "okay"; +}; + +&vuart { + status = "okay"; + aspeed,lpc-io-reg = <0x2f8>; + aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* hardware monitor/thermal sensor */ + temperature-sensor@29 { + compatible = "nuvoton,nct7802"; + reg = <0x29>; + }; + + /* motherboard temp sensor (TMP1, near BMC) */ + temperature-sensor@4c { + compatible = "nuvoton,w83773g"; + reg = <0x4c>; + }; + + /* motherboard FRU eeprom */ + eeprom@50 { + compatible = "st,24c128", "atmel,24c128"; + reg = <0x50>; + pagesize = <16>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; + }; + }; + + /* M.2 slot smbus mux */ + i2c-mux@71 { + compatible = "nxp,pca9545"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&video { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&peci0 { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N", + "BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN", + "", "", "", "", + /* B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "", + "", "", "", "GPIO_RST", + /* C */ "", "", "", "", "", "", "", "", + /* D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N", + "FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N", + "NMI_BTN_N", "BMC_NMI", + "", "", + /* E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "", + /* F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N", + "FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN", + "FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN", + "FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N", + /* G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL", + "BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N", + /* H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "", + "FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", + /* I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N", + "IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N", + "", "", "", "", + /* J */ "", "", "", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N", + "IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N", + "FM_CPU1_PROCHOT_BMC_LVC3_N", "", + "FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "", "", "", "", "", "", "", "", + /* Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N", + /* R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N", + "", "FM_BMC_PCH_SCI_LPC_N", "", "", + /* S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N", + "FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3", + "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD", + "", "", "", "", + /* Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N", + "", "", "", "", + /* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N", + "FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK", + "", "IRQ_SML0_ALERT_MUX_N", + "IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N", + /* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK", + "ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N", + "", "", "", "", + /* AC */ "", "", "", "", "", "", "", ""; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ + &pinctrl_adc1_default /* 5VSB */ + &pinctrl_adc2_default /* CPU1 */ + &pinctrl_adc3_default /* NC */ + &pinctrl_adc4_default /* VCCMABCD */ + &pinctrl_adc5_default /* VCCMEFGH */ + &pinctrl_adc6_default /* NC */ + &pinctrl_adc7_default /* NC */ + &pinctrl_adc8_default /* PVNN_PCH */ + &pinctrl_adc9_default /* 1P05PCH */ + &pinctrl_adc10_default /* 1P8PCH */ + &pinctrl_adc11_default /* BAT */ + &pinctrl_adc12_default /* 3V */ + &pinctrl_adc13_default /* 5V */ + &pinctrl_adc14_default /* 12V */ + &pinctrl_adc15_default>; /* GND */ +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts new file mode 100644 index 000000000000..0943e0bf1305 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Asrock Rack X570D4U BMC"; + compatible = "asrock,x570d4u-bmc", "aspeed,ast2500"; + + aliases { + i2c40 = &i2c4mux0ch0; + i2c41 = &i2c4mux0ch1; + i2c42 = &i2c4mux0ch2; + i2c43 = &i2c4mux0ch3; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pci_memory: region@9a000000 { + no-map; + reg = <0x9a000000 0x00010000>; /* 64K */ + }; + + video_engine_memory: jpegbuffer { + size = <0x02800000>; /* 40M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* led-heartbeat-n */ + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "timer"; + }; + + led-1 { + /* led-fault-n */ + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_FAULT; + panic-indicator; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "input-locatorled-n", "", "", "", "", "", "", "", + /* B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "", + /* C */ "", "", "", "", "", "", "control-locatorbutton-n", "", + /* D */ "button-power-n", "control-power-n", "button-reset-n", + "control-reset-n", "", "", "", "", + /* E */ "", "", "", "", "", "", "", "", + /* F */ "", "", "", "", "", "", "", "", + /* G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n", + "input-id2-n", "input-aux-smb-alert-n", "", + "input-psu-smb-alert-n", "", + /* H */ "", "", "", "", "input-mfg-mode-n", "", + "led-heartbeat-n", "input-case-open-n", + /* I */ "", "", "", "", "", "", "", "", + /* J */ "output-bmc-ready-n", "", "", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "", "", "", "", "", "", "", "", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "", "", "", "", "", "", "", "", + /* Q */ "", "", "", "", "input-bmc-smb-present-n", "", "", + "input-pcie-wake-n", + /* R */ "", "", "", "", "", "", "", "", + /* S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "", + "", "", + /* Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "", + "", "", + /* AA */ "input-cpu1-thermtrip-latch-n", "", + "input-cpu1-prochot-n", "", "", "", "", "", + /* AB */ "", "input-power-good", "", "", "", "", "", "", + /* AC */ "", "", "", "", "", "", "", ""; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <10000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&uart5 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>; + use-ncsi; + + nvmem-cells = <ð1_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + /* SMBus on auxiliary panel header (AUX_PANEL1) */ + status = "okay"; +}; + +&i2c1 { + /* Hardware monitoring SMBus */ + status = "okay"; + + w83773g@4c { + compatible = "nuvoton,w83773g"; + reg = <0x4c>; + }; +}; + +&i2c2 { + /* PSU SMBus (PSU_SMB1) */ + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c4mux0ch0: i2c@0 { + /* SMBus on PCI express 16x slot */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c4mux0ch1: i2c@1 { + /* SMBus on PCI express 8x slot */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c4mux0ch2: i2c@2 { + /* Unknown */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c4mux0ch3: i2c@3 { + /* SMBus on PCI express 1x slot */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c5 { + /* SMBus on BMC connector (BMC_SMB_1) */ + status = "okay"; +}; + +&i2c7 { + /* FRU and SPD EEPROM SMBus */ + status = "okay"; + + eeprom@57 { + compatible = "st,24c128", "atmel,24c128"; + reg = <0x57>; + pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; + + eth1_macaddress: macaddress@3f88 { + reg = <0x3f88 6>; + }; + }; +}; + +&i2c8 { + /* SMBus on intelligent platform management bus header (IPMB_1) */ + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&p2a { + status = "okay"; + memory-region = <&pci_memory>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default>; + + fan@0 { + /* FAN1 (4-pin) */ + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + /* FAN2 (4-pin) */ + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + /* FAN3 (4-pin) */ + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + /* FAN4 (6-pin) */ + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>; + }; + + fan@4 { + /* FAN6 (6-pin) */ + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>; + }; + + fan@5 { + /* FAN5 (6-pin) */ + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ + &pinctrl_adc1_default /* 5VSB */ + &pinctrl_adc2_default /* VCPU */ + &pinctrl_adc3_default /* VSOC */ + &pinctrl_adc4_default /* VCCM */ + &pinctrl_adc5_default /* APU-VDDP */ + &pinctrl_adc6_default /* PM-VDD-CLDO */ + &pinctrl_adc7_default /* PM-VDDCR-S5 */ + &pinctrl_adc8_default /* PM-VDDCR */ + &pinctrl_adc9_default /* VBAT */ + &pinctrl_adc10_default /* 3V */ + &pinctrl_adc11_default /* 5V */ + &pinctrl_adc12_default>; /* 12V */ +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts new file mode 100644 index 000000000000..64f4ed07c7d2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 ASUS Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include "aspeed-g6-pinctrl.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "ASUS-X4TF"; + compatible = "asus,x4tf-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = "serial4:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + leds { + compatible = "gpio-leds"; + + led-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-uid { + gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + default-state = "off"; + }; + + led-status_Y { + gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-sys_boot_status { + gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&adc0 { + vref = <2500>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref = <2500>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&peci0 { + status = "okay"; +}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +&mac2 { + status = "okay"; + phy-mode = "rmii"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; +}; + +&mac3 { + status = "okay"; + phy-mode = "rmii"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "bios"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + pca9555_4_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_4_22: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_4_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*A0 - A3 0*/ "", "STRAP_BMC_BATTERY_GPIO1", "", "", + /*A4 - A7 4*/ "", "", "", "", + /*B0 - B7 8*/ "", "", "", "", "", "", "", ""; + }; + + pca9555_4_26: gpio@26 { + compatible = "nxp,pca9555"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + channel_1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c5 { + status = "okay"; + + pca9555_5_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70 >; + #address-cells = <1>; + #size-cells = <0>; + + channel_5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + pca9555_5_5_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "SYS_FAN6", "SYS_FAN5", + "SYS_FAN4", "SYS_FAN3", + "SYS_FAN2", "SYS_FAN1"; + }; + + pca9555_5_5_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + power-monitor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2>; + }; + }; + + channel_6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_7: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_8: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + pca9555_6_27: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_6_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*A0 0*/ "", "", "", "", "", "", "", "", + /*B0 8*/ "Drive_NVMe1", "Drive_NVMe2", "", "", + /*B4 12*/ "", "", "", ""; + }; + + pca9555_6_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c7 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + idle-state = <1>; + + channel_9: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + power-monitor@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <2>; + }; + + power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + + channel_10: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_11: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_12: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + channel_13: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_14: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_15: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_16: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + channel_17: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_18: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + + channel_19: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_20: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; + multi-master; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + }; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&sdc { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&kcs1 { + aspeed,lpc-io-reg = <0xca0>; + status = "okay"; +}; + +&kcs2 { + aspeed,lpc-io-reg = <0xca8>; + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0 0*/ "", "", "", "", "", "", "", "", + /*B0 8*/ "", "", "", "", "", "", "PS_PWROK", "", + /*C0 16*/ "", "", "", "", "", "", "", "", + /*D0 24*/ "", "", "", "", "", "", "", "", + /*E0 32*/ "", "", "", "", "", "", "", "", + /*F0 40*/ "", "", "", "", "", "", "", "", + /*G0 48*/ "", "", "", "", "", "", "", "", + /*H0 56*/ "", "", "", "", "", "", "", "", + /*I0 64*/ "", "", "", "", "", "", "", "", + /*J0 72*/ "", "", "", "", "", "", "", "", + /*K0 80*/ "", "", "", "", "", "", "", "", + /*L0 88*/ "", "", "", "", "", "", "", "", + /*M0 96*/ "", "", "", "", "", "", "", "", + /*N0 104*/ "", "", "", "", + /*N4 108*/ "POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "", + /*O0 112*/ "", "", "", "", "", "", "", "", + /*P0 120*/ "ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT", + /*P4 124*/ "RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT", + /*Q0 128*/ "", "", "", "", "", "", "", "", + /*R0 136*/ "", "", "", "", "", "", "", "", + /*S0 144*/ "", "", "", "", "", "", "", "", + /*T0 152*/ "", "", "", "", "", "", "", "", + /*U0 160*/ "", "", "", "", "", "", "", "", + /*V0 168*/ "", "", "", "", "", "", "", "", + /*W0 176*/ "", "", "", "", "", "", "", "", + /*X0 184*/ "", "", "", "", "", "", "", "", + /*Y0 192*/ "", "", "", "", "", "", "", "", + /*Z0 200*/ "", "", "", "", "", "", "", ""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts index 6600f7e9bf5e..b6bfdaea08e6 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts @@ -14,11 +14,11 @@ #define EFUSE(hexaddr, num) \ efuse@##hexaddr { \ - compatible = "lm25066"; \ + compatible = "ti,lm25066"; \ reg = <0x##hexaddr>; \ shunt-resistor-micro-ohms = <675>; \ regulators { \ - efuse##num: vout0 { \ + efuse##num: vout { \ regulator-name = __stringify(efuse##num##-reg); \ }; \ }; \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts new file mode 100644 index 000000000000..c151984289bc --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts @@ -0,0 +1,1119 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Catalina BMC"; + compatible = "facebook,catalina-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &i2c1mux0ch0; + i2c17 = &i2c1mux0ch1; + i2c18 = &i2c1mux0ch2; + i2c19 = &i2c1mux0ch3; + i2c20 = &i2c1mux0ch4; + i2c21 = &i2c1mux0ch5; + i2c22 = &i2c1mux0ch6; + i2c23 = &i2c1mux0ch7; + i2c24 = &i2c0mux0ch0; + i2c25 = &i2c0mux0ch1; + i2c26 = &i2c0mux0ch2; + i2c27 = &i2c0mux0ch3; + i2c28 = &i2c0mux1ch0; + i2c29 = &i2c0mux1ch1; + i2c30 = &i2c0mux1ch2; + i2c31 = &i2c0mux1ch3; + i2c32 = &i2c0mux2ch0; + i2c33 = &i2c0mux2ch1; + i2c34 = &i2c0mux2ch2; + i2c35 = &i2c0mux2ch3; + i2c36 = &i2c0mux3ch0; + i2c37 = &i2c0mux3ch1; + i2c38 = &i2c0mux3ch2; + i2c39 = &i2c0mux3ch3; + i2c40 = &i2c0mux4ch0; + i2c41 = &i2c0mux4ch1; + i2c42 = &i2c0mux4ch2; + i2c43 = &i2c0mux4ch3; + i2c44 = &i2c0mux5ch0; + i2c45 = &i2c0mux5ch1; + i2c46 = &i2c0mux5ch2; + i2c47 = &i2c0mux5ch3; + i2c48 = &i2c5mux0ch0; + i2c49 = &i2c5mux0ch1; + i2c50 = &i2c5mux0ch2; + i2c51 = &i2c5mux0ch3; + i2c52 = &i2c5mux0ch4; + i2c53 = &i2c5mux0ch5; + i2c54 = &i2c5mux0ch6; + i2c55 = &i2c5mux0ch7; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + spi1_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "bmc_ready_noled"; + gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + + led-3 { + label = "bmc_ready_cpld_noled"; + gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + }; + + p1v8_bmc_aux: regulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p2v5_bmc_aux: regulator-p2v5-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p2v5_bmc_aux"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi3_default>; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi4_default>; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux1ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux1ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 0 IOEXP + io_expander7: gpio@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux1ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux1ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9546"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux2ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux2ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux2ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux2ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@75 { + compatible = "nxp,pca9546"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux3ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux3ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux3ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux3ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux4ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux4ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 1 IOEXP + io_expander8: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux4ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux4ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux5ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux5ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux5ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux5ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c1 { + status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <500>; + }; + power-sensor@42 { + compatible = "ti,ina238"; + reg = <0x42>; + shunt-resistor = <500>; + }; + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <500>; + }; + }; + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + }; + power-sensor@43 { + compatible = "ti,ina238"; + reg = <0x43>; + }; + }; + i2c1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + i2c1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + i2c1mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + power-monitor@42 { + compatible = "lltc,ltc4287"; + reg = <0x42>; + shunt-resistor-micro-ohms = <100>; + }; + power-monitor@43 { + compatible = "lltc,ltc4287"; + reg = <0x43>; + shunt-resistor-micro-ohms = <100>; + }; + }; + i2c1mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + // PDB FRU EEPROM + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + // PDB TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + }; + i2c1mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + // PDB IOEXP + io_expander5: gpio@27 { + compatible = "nxp,pca9554"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP IOEXP + io_expander6: gpio@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + i2c1mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + // FIO FRU EEPROM + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + // FIO TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + // Module 0 IOEXP + io_expander0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + // Module 1 IOEXP + io_expander1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // HMC IOEXP + io_expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + // Module 0 EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Module 1 EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c5mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c5mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c5mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + i2c5mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + i2c5mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + i2c5mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + // HDD FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + i2c5mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + // BMC IOEXP on Module 0 + io_expander3: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + // SCM CPLD IOEXP + io_expander4: gpio@4f { + compatible = "nxp,pca9555"; + reg = <0x4f>; + gpio-controller; + #gpio-cells = <2>; + }; + + // SCM TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + // SCM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU EEPROM + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c10 { + status = "okay"; + + // OCP NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c12 { + status = "okay"; + + // Module 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + // Module 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Left CBC FRU EEPROM + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; + + // Right CBC FRU EEPROM + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + + // HMC FRU EEPROM + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c14 { + status = "okay"; + + // PDB CPLD IOEXP 0x10 + io_expander9: gpio@10 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x10>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x11 + io_expander10: gpio@11 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x12 + io_expander11: gpio@12 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x13 + io_expander12: gpio@13 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x14 + io_expander13: gpio@14 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x14>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x15 + io_expander14: gpio@15 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c15 { + status = "okay"; + + // OCP NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC1 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&adc0 { + vref-supply = <&p1v8_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref-supply = <&p2v5_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&pinctrl { + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; + + pinctrl_ncsi4_default: ncsi4_default { + function = "RMII4"; + groups = "NCSI4"; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N", + "BMC_I2C1_FPGA_ALERT_L","BMC_READY", + "IOEXP_INT_L","FM_ID_LED", + "","", + /*C0-C7*/ "","","","", + "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N", + "","BMC_I2C_SSIF_ALERT_L", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","", + "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N", + /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN", + "SHDN_FORCE_L","SHDN_REQ_L", + "","","","", + /*I0-I7*/ "","","","", + "","FLASH_WP_STATUS", + "FM_PDB_HEALTH_N","RUN_POWER_PG", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP", + "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN", + "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC", + "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N", + "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N", + "","USBDBG_IPMI_EN_L", + /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L", + "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N", + "host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N", + "UART_MUX_SEL","I2C_MUX_RESET_L", + "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L", + /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L", + "CPU_BOOT_DONE","PMBUS_GNT_L", + "CHASSIS_PWR_BRK_L","PCIE_WAKE_L", + "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N", + "SYS_FAULT_LED_N","RUN_POWER_FAULT_L", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L", + "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L", + "SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT_L","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","RST_BMC_SELF_HW", + "FM_FLASH_LATCH_N","BMC_EMMC_RST_N", + "","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&io_expander0 { + gpio-line-names = + "FPGA_THERM_OVERT_L","FPGA_READY_BMC", + "HMC_BMC_DETECT","HMC_PGOOD", + "","BMC_SELF_PWR_CYCLE", + "FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L", + "EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L", + "BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L", + "NCSI_CS1_SEL","SGPIO_EN_L", + "B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L"; +}; + +&io_expander1 { + gpio-line-names = + "SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC", + "","", + "","", + "SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L", + "SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L", + "SEC_BMC_EROT_FPGA_SPI_MUX_SEL","", + "","", + "","SEC_I2C_BUS_MUX_RESET_L"; +}; + +&io_expander2 { + gpio-line-names = + "HMC_PRSNT_L","HMC_READY", + "HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL", + "HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L", + "HMC_EROT_RST_L","GLOBAL_WP_HMC", + "FPGA_RST_L","USB2_HUB_RST", + "CPU_UART_MUX_SEL","", + "","","",""; +}; + +&io_expander3 { + gpio-line-names = + "RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL", + "SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL", + "BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG", + "","","",""; +}; + +&io_expander4 { + gpio-line-names = + "stby_power_en_cpld","stby_power_gd_cpld","","", + "","","","", + "","","","", + "","","",""; +}; + +&io_expander5 { + gpio-line-names = + "JTAG_MUX_SEL","IOX_BMC_RESET","","", + "","","",""; +}; + +&io_expander6 { + gpio-line-names = + "OSFP_PHASE_ID0","OSFP_PHASE_ID1", + "OSFP_PHASE_ID2","OSFP_PHASE_ID3", + "","","","", + "OSFP_BOARD_ID0","OSFP_BOARD_ID1", + "OSFP_BOARD_ID2","PWRGD_P3V3_N1", + "PWRGD_P3V3_N2","","",""; +}; + +&io_expander7 { + gpio-line-names = + "RST_CX7_0","RST_CX7_1", + "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L", + "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1", + "CX_TWARN_CX0_L","CX_TWARN_CX1_L", + "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1", + "FNP_L_CX0","FNP_L_CX1", + "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N"; +}; + +&io_expander8 { + gpio-line-names = + "SEC_RST_CX7_0","SEC_RST_CX7_1", + "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L", + "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1", + "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L", + "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1", + "SEC_FNP_L_CX0","SEC_FNP_L_CX1", + "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N"; +}; + +&io_expander9 { + gpio-line-names = + "LEAK3_DETECT_R","LEAK1_DETECT_R", + "LEAK2_DETECT_R","LEAK0_DETECT_R", + "CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD", + "CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD", + "P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N", + "P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R", + "RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT", + "",""; +}; + +&io_expander10 { + gpio-line-names = + "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N", + "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N", + "P12V_AUX_NIC1_SENSE_ALERT_R_N", + "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N", + "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N", + "P12V_AUX_NIC0_SENSE_ALERT_R_N", + "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N", + "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L", + "P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD", + "P48V_HS1_FAULT_N_PLD",""; +}; + +&io_expander11 { + gpio-line-names = + "FAN_7_PRESENT_N","FAN_6_PRESENT_N", + "FAN_5_PRESENT_N","FAN_4_PRESENT_N", + "FAN_3_PRESENT_N","FAN_2_PRESENT_N", + "FAN_1_PRESENT_N","FAN_0_PRESENT_N", + "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N", + "PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N", + "PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N", + "PRSNT_OSFP_POWER_CABLE_N",""; +}; + +&io_expander12 { + gpio-line-names = + "RST_OCP_V3_1_R_N","NIC0_PERST_N", + "OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN", + "FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R", + "HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R", + "RST_OCP_V3_2_R_N","NIC1_PERST_N", + "OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN", + "FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R", + "HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R"; +}; + +&io_expander13 { + gpio-line-names = + "NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS", + "PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD", + "PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R", + "FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R", + "PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD", + "P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N", + "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N", + "",""; +}; + +&io_expander14 { + gpio-line-names = + "","","","","","","","", + "FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2", + "FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0", + "FAB_BMC_REV_ID2","FAB_BMC_REV_ID1", + "FAB_BMC_REV_ID0",""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts deleted file mode 100644 index d49328fa487a..000000000000 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts +++ /dev/null @@ -1,544 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// Copyright (c) 2020 Facebook Inc. - -/dts-v1/; - -#include <dt-bindings/leds/common.h> -#include "ast2600-facebook-netbmc-common.dtsi" - -/ { - model = "Facebook Cloudripper BMC"; - compatible = "facebook,cloudripper-bmc", "aspeed,ast2600"; - - aliases { - /* - * PCA9548 (1-0070) provides 8 channels connecting to - * SMB (Switch Main Board). - */ - i2c16 = &imux16; - i2c17 = &imux17; - i2c18 = &imux18; - i2c19 = &imux19; - i2c20 = &imux20; - i2c21 = &imux21; - i2c22 = &imux22; - i2c23 = &imux23; - - /* - * PCA9548 (2-0070) provides 8 channels connecting to - * SCM (System Controller Module). - */ - i2c24 = &imux24; - i2c25 = &imux25; - i2c26 = &imux26; - i2c27 = &imux27; - i2c28 = &imux28; - i2c29 = &imux29; - i2c30 = &imux30; - i2c31 = &imux31; - - /* - * PCA9548 (3-0070) provides 8 channels connecting to - * SMB (Switch Main Board). - */ - i2c32 = &imux32; - i2c33 = &imux33; - i2c34 = &imux34; - i2c35 = &imux35; - i2c36 = &imux36; - i2c37 = &imux37; - i2c38 = &imux38; - i2c39 = &imux39; - - /* - * PCA9548 (8-0070) provides 8 channels connecting to - * PDB (Power Delivery Board). - */ - i2c40 = &imux40; - i2c41 = &imux41; - i2c42 = &imux42; - i2c43 = &imux43; - i2c44 = &imux44; - i2c45 = &imux45; - i2c46 = &imux46; - i2c47 = &imux47; - - /* - * PCA9548 (15-0076) provides 8 channels connecting to - * FCM (Fan Controller Module). - */ - i2c48 = &imux48; - i2c49 = &imux49; - i2c50 = &imux50; - i2c51 = &imux51; - i2c52 = &imux52; - i2c53 = &imux53; - i2c54 = &imux54; - i2c55 = &imux55; - }; - - spi_gpio: spi { - num-chipselects = <2>; - cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, - <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>; - - eeprom@1 { - compatible = "atmel,at93c46d"; - spi-max-frequency = <250000>; - data-size = <16>; - spi-cs-high; - reg = <1>; - }; - }; -}; - -&ehci1 { - status = "okay"; -}; - -/* - * "mdio1" is connected to the MDC/MDIO interface of the on-board - * management switch (whose ports are connected to BMC, Host and front - * panel ethernet port). - */ -&mdio1 { - status = "okay"; -}; - -&mdio3 { - status = "okay"; - - ethphy1: ethernet-phy@13 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0d>; - }; -}; - -&mac3 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <ðphy1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii4_default>; -}; - -&i2c0 { - multi-master; - bus-frequency = <1000000>; -}; - -&i2c1 { - /* - * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch - * Main Board). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux16: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux17: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux18: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux19: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux20: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux21: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux22: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux23: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c2 { - /* - * PCA9548 (2-0070) provides 8 channels connecting to SCM (System - * Controller Module). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux24: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux25: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux26: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux27: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux28: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux29: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux30: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux31: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c3 { - /* - * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch - * Main Board). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux32: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux33: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux34: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux35: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux36: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux37: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux38: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux39: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c6 { - lp5012@14 { - compatible = "ti,lp5012"; - reg = <0x14>; - #address-cells = <1>; - #size-cells = <0>; - - multi-led@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "sys"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "fan"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "psu"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "scm"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - }; -}; - -&i2c8 { - /* - * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power - * Delivery Board). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux40: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux41: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux42: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux43: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux44: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux45: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux46: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux47: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - - }; -}; - -&i2c15 { - /* - * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan - * Controller Module). - */ - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux48: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux49: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux50: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux51: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux52: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux53: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux54: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux55: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts index 7a53f54833a0..49914a4a179f 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts @@ -66,7 +66,7 @@ pinctrl-0 = <&pinctrl_rmii4_default>; no-hw-checksum; use-ncsi; - mlx,multi-host; + mellanox,multi-host; ncsi-ctrl,start-redo-probe; ncsi-ctrl,no-channel-monitor; ncsi-package = <1>; @@ -201,7 +201,7 @@ &i2c12 { status = "okay"; temperature-sensor@4f { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x4f>; }; }; @@ -211,7 +211,6 @@ }; &adc0 { - ref_voltage = <2500>; status = "okay"; pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default &pinctrl_adc2_default &pinctrl_adc3_default @@ -220,7 +219,6 @@ }; &adc1 { - ref_voltage = <2500>; status = "okay"; pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default &pinctrl_adc11_default &pinctrl_adc12_default diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts new file mode 100644 index 000000000000..9cb511a846e3 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -0,0 +1,732 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2023 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Harma"; + compatible = "facebook,harma-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart4; + serial4 = &uart5; + + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + spi1 = &spi_gpio; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "power_blue"; + default-state = "off"; + gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>; + }; + }; + + spi_gpio: spi { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +// HOST BIOS Debug +&uart1 { + status = "okay"; +}; + +// SOL Host Console +&uart2 { + status = "okay"; + pinctrl-0 = <>; +}; + +// SOL BMC Console +&uart4 { + status = "okay"; + pinctrl-0 = <>; +}; + +// BMC Debug Console +&uart5 { + status = "okay"; +}; + +// MTIA +&uart6 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +// BIOS Flash +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <12000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&i2c0 { + status = "okay"; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; +}; + +&i2c1 { + status = "okay"; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + // MB NIC FRU + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c2 { + status = "okay"; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + //Retimer Flash + eeprom@50 { + compatible = "atmel,24c2048"; + reg = <0x50>; + pagesize = <128>; + }; + }; + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + retimer@24 { + compatible = "asteralabs,pt5161l"; + reg = <0x24>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + // PDB FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + power-monitor@69 { + compatible = "pmbus"; + reg = <0x69>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + power-monitor@44 { + compatible = "lltc,ltc4287"; + reg = <0x44>; + shunt-resistor-micro-ohms = <250>; + }; + + power-monitor@40 { + compatible = "infineon,xdp710"; + reg = <0x40>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux22: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux23: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + mctp-controller; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + gpio@30 { + compatible = "nxp,pca9555"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + gpio@31 { + compatible = "nxp,pca9555"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PTTV FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&i2c11 { + status = "okay"; + + gpio@30 { + compatible = "nxp,pca9555"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + gpio@31 { + compatible = "nxp,pca9555"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + }; + + // Aegis FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&i2c12 { + status = "okay"; + retimer@24 { + compatible = "asteralabs,pt5161l"; + reg = <0x24>; + }; +}; + +&i2c13 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + power-monitor@61 { + compatible = "isil,isl69260"; + reg = <0x61>; + }; + power-monitor@62 { + compatible = "isil,isl69260"; + reg = <0x62>; + }; + power-monitor@63 { + compatible = "isil,isl69260"; + reg = <0x63>; + }; + power-monitor@64 { + compatible = "infineon,xdpe152c4"; + reg = <0x64>; + }; + power-monitor@66 { + compatible = "infineon,xdpe152c4"; + reg = <0x66>; + }; + power-monitor@68 { + compatible = "infineon,xdpe152c4"; + reg = <0x68>; + }; + }; + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + //MB FRU + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + }; + imux30: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux31: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; +}; + +// To Debug card +&i2c14 { + status = "okay"; + multi-master; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c15 { + status = "okay"; + + // SCM FRU + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&adc0 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&gpio0 { + pinctrl-names = "default"; + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","", + "bmc-spi-mux-select-0","led-identify","","", + /*C0-C7*/ "reset-cause-platrst","","","","", + "power-hsc-good","power-chassis-good","", + /*D0-D7*/ "","","sol-uart-select","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","", + "leakage-detect-alert","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "led-postcode-0","led-postcode-1", + "led-postcode-2","led-postcode-3", + "led-postcode-4","led-postcode-5", + "led-postcode-6","led-postcode-7", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "power-button","power-host-control", + "reset-button","","led-power","","","", + /*Q0-Q7*/ + "","","","", + "","power-chassis-control","","uart-switch-button", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","led-identify-gate","", + /*V0-V7*/ "","","","", + "rtc-battery-voltage-read-enable","", + "","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","presence-post-card",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "ac-power-button","","","","","","","", + /*18B0-18B7*/ "","","","","","","","", + /*18C0-18C7*/ "","","","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","","","","",""; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; + bus-frequency = <2000000>; + gpio-line-names = + /*in - out - in - out */ + /*A0-A3 line 0-7*/ + "presence-scm-cable","power-config-disable-e1s-0", + "","", + "","power-config-disable-e1s-1", + "","", + /*A4-A7 line 8-15*/ + "","power-config-asic-module-enable", + "","power-config-asic-power-good", + "","power-config-pdb-power-good", + "presence-cpu","smi-control-n", + /*B0-B3 line 16-23*/ + "","nmi-control-n", + "","nmi-control-sync-flood-n", + "","", + "","", + /*B4-B7 line 24-31*/ + "","FM_CPU_SP5R1", + "reset-cause-rsmrst","FM_CPU_SP5R2", + "","FM_CPU_SP5R3", + "","FM_CPU_SP5R4", + /*C0-C3 line 32-39*/ + "","FM_CPU0_SA0", + "","FM_CPU0_SA1", + "","rt-cpu0-p0-enable", + "","rt-cpu0-p1-enable", + /*C4-C7 line 40-47*/ + "","smb-rt-rom-p0-select", + "","smb-rt-rom-p1-select", + "","i3c-cpu-mux0-oe-n", + "","i3c-cpu-mux0-select", + /*D0-D3 line 48-55*/ + "","i3c-cpu-mux1-oe-n", + "","i3c-cpu-mux1-select", + "","reset-control-bmc", + "","reset-control-cpu0-p0-mux", + /*D4-D7 line 56-63*/ + "","reset-control-cpu0-p1-mux", + "","reset-control-e1s-mux", + "power-host-good","reset-control-mb-mux", + "host0-ready","reset-control-smb-e1s-0", + /*E0-E3 line 64-71*/ + "","reset-control-smb-e1s-1", + "post-end-n","reset-control-srst", + "presence-e1s-0","reset-control-usb-hub", + "","reset-control", + /*E4-E7 line 72-79*/ + "presence-e1s-1","reset-control-cpu-kbrst", + "","reset-control-platrst", + "","bmc-jtag-mux-select-0", + "","bmc-jtag-mux-select-1", + /*F0-F3 line 80-87*/ + "","bmc-jtag-select", + "","bmc-ready-n", + "","bmc-ready-sgpio", + "","rt-cpu0-p0-force-enable", + /*F4-F7 line 88-95*/ + "presence-asic-modules-0","rt-cpu0-p1-force-enable", + "presence-asic-modules-1","bios-debug-msg-disable", + "","uart-control-buffer-select", + "presence-cmm","ac-control-n", + /*G0-G3 line 96-103*/ + "FM_CPU_CORETYPE2","", + "FM_CPU_CORETYPE1","", + "FM_CPU_CORETYPE0","", + "FM_BOARD_REV_ID5","", + /*G4-G7 line 104-111*/ + "FM_BOARD_REV_ID4","", + "FM_BOARD_REV_ID3","", + "FM_BOARD_REV_ID2","", + "FM_BOARD_REV_ID1","", + /*H0-H3 line 112-119*/ + "FM_BOARD_REV_ID0","reset-control-cmos-clear", + "","","","","","", + /*H4-H7 line 120-127*/ + "","", + "reset-control-pcie-expansion-3","", + "reset-control-pcie-expansion-2","", + "reset-control-pcie-expansion-1","", + /*I0-I3 line 128-135*/ + "reset-control-pcie-expansion-0","", + "FM_EXP_SLOT_ID1","", + "FM_EXP_SLOT_ID0","", + "","", + /*I4-I7 line 136-143*/ + "","","","","","","","", + /*J0-J3 line 144-151*/ + "","","power-card-enable","","","","","", + /*J4-J7 line 152-159*/ + "SLOT_ID_BCB_0","", + "SLOT_ID_BCB_1","", + "SLOT_ID_BCB_2","", + "SLOT_ID_BCB_3","", + /*K0-K3 line 160-167*/ + "","","","","","","P0_I3C_APML_ALERT_L","", + /*K4-K7 line 168-175*/ + "","","","","","","irq-uv-detect-alert","", + /*L0-L3 line 176-183*/ + "irq-hsc-alert","", + "cpu0-prochot-alert","", + "cpu0-thermtrip-alert","", + "reset-cause-pcie","", + /*L4-L7 line 184-191*/ + "pvdd11-ocp-alert","", + "power-fault-n","", + "asic0-card-type-detection0-n","", + "asic0-card-type-detection1-n","", + /*M0-M3 line 192-199*/ + "asic0-card-type-detection2-n","", + "uart-switch-lsb","", + "uart-switch-msb","", + "","", + /*M4-M7 line 200-207*/ + "","","","","","","","", + /*N0-N3 line 208-215*/ + "","","","","","","","", + /*N4-N7 line 216-223*/ + "","","","","","","","", + /*O0-O3 line 224-231*/ + "","","","","","","","", + /*O4-O7 line 232-239*/ + "","","","","","","","", + /*P0-P3 line 240-247*/ + "","","","","","","","", + /*P4-P7 line 248-255*/ + "","","","","","","",""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts deleted file mode 100644 index f04ef9063520..000000000000 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts +++ /dev/null @@ -1,265 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// Copyright (c) 2023 Facebook Inc. -/dts-v1/; - -#include "aspeed-g6.dtsi" -#include <dt-bindings/gpio/aspeed-gpio.h> -#include <dt-bindings/i2c/i2c.h> - -/ { - model = "Facebook Minerva CMC"; - compatible = "facebook,minerva-cmc", "aspeed,ast2600"; - - aliases { - serial5 = &uart5; - }; - - chosen { - stdout-path = "serial5:57600n8"; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, - <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, - <&adc1 2>; - }; -}; - -&uart6 { - status = "okay"; -}; - -&wdt1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdtrst1_default>; - aspeed,reset-type = "soc"; - aspeed,external-signal; - aspeed,ext-push-pull; - aspeed,ext-active-high; - aspeed,ext-pulse-duration = <256>; -}; - -&mac3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii4_default>; - use-ncsi; - mlx,multi-host; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; - spi-max-frequency = <50000000>; -#include "openbmc-flash-layout-128.dtsi" - }; - flash@1 { - status = "okay"; - m25p,fast-read; - label = "alt-bmc"; - spi-max-frequency = <50000000>; - }; -}; - -&rtc { - status = "okay"; -}; - -&sgpiom1 { - status = "okay"; - ngpios = <128>; - bus-frequency = <2000000>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - temperature-sensor@4b { - compatible = "ti,tmp75"; - reg = <0x4B>; - }; - - eeprom@51 { - compatible = "atmel,24c128"; - reg = <0x51>; - }; -}; - -&i2c2 { - status = "okay"; - - i2c-mux@77 { - compatible = "nxp,pca9548"; - reg = <0x77>; - #address-cells = <1>; - #size-cells = <0>; - i2c-mux-idle-disconnect; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - -&i2c7 { - status = "okay"; -}; - -&i2c8 { - status = "okay"; -}; - -&i2c9 { - status = "okay"; -}; - -&i2c10 { - status = "okay"; -}; - -&i2c11 { - status = "okay"; -}; - -&i2c12 { - status = "okay"; -}; - -&i2c13 { - status = "okay"; -}; - -&i2c14 { - status = "okay"; - multi-master; - - ipmb@10 { - compatible = "ipmb-dev"; - reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; - i2c-protocol; - }; -}; - -&i2c15 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; -}; - -&adc0 { - aspeed,int-vref-microvolt = <2500000>; - status = "okay"; - pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default - &pinctrl_adc2_default &pinctrl_adc3_default - &pinctrl_adc4_default &pinctrl_adc5_default - &pinctrl_adc6_default &pinctrl_adc7_default>; -}; - -&adc1 { - aspeed,int-vref-microvolt = <2500000>; - status = "okay"; - pinctrl-0 = <&pinctrl_adc10_default>; -}; - -&ehci1 { - status = "okay"; -}; - -&uhci { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts new file mode 100644 index 000000000000..ef96b17becb2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts @@ -0,0 +1,1631 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2023 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Minerva CMM"; + compatible = "facebook,minerva-cmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + serial5 = &uart6; + /* + * PCA9548 (2-0077) provides 8 channels connecting to + * 6 pcs of FCB (Fan Controller Board). + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + i2c40 = &imux40; + i2c41 = &imux41; + i2c42 = &imux42; + i2c43 = &imux43; + i2c44 = &imux44; + i2c45 = &imux45; + i2c46 = &imux46; + i2c47 = &imux47; + + spi1 = &spi_gpio; + }; + + chosen { + stdout-path = "serial5:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "power_blue"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + + led-3 { + label = "fan_status_led"; + gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + label = "fan_fault_led_n"; + gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-5 { + label = "bmc_ready_noled"; + gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + }; + + spi_gpio: spi { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +&uart6 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac3 { + status = "okay"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&mdio3 { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; + bus-frequency = <2000000>; +}; + +&i2c0 { + status = "okay"; + + power-monitor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "lltc,ltc4287"; + reg = <0x44>; + shunt-resistor-micro-ohms = <2000>; + }; + + power-monitor@43 { + compatible = "infineon,xdp710"; + reg = <0x43>; + }; + + leds_gpio: gpio@19 { + compatible = "nxp,pca9555"; + reg = <0x19>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <238 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "PWRGD_P24V_SMPWROK", "P1V5_PWROK", + "P3V3_PWROK", "P5V_PWROK", + "P12V_SCM_PWROK", "P12V_PWROK", + "P24V_PWROK", "P48V_HSC_PWROK", + "ERR_GPIO_IRQ", "TMP75_ALERT_N", + "BMC_PWROK", "P12V_INA230_ALERT_N", + "P24V_INA230_ALERT_N","", + "P48V_HSC_ALERT_N", "P1V05_PWROK"; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <240 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P1V05_PWR_FAIL", "P1V5_PWR_FAIL", + "P24V_PWR_FAIL", "P24V_SM_PWR_FAIL", + "IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N", + "RTC_INT_N_R", "ERR_GPIO_IRQ", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <242 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "", "", + "", "", + "", "", + "", "", + "RACKMON_A_1", "RACKMON_A_2", + "RACKMON_B_1", "RACKMON_B_2", + "", "", + "", ""; + }; +}; + +&i2c1 { + status = "okay"; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; +}; + +&i2c2 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9548"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + // FCB 1 + imux16: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R", + "P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R", + "FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R", + "FCB_1_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N", + "INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N", + "FCB_1_TMP75_ALERT_N", "", + "", "", + "FAN1_PRSNT", "FAN2_PRSNT", + "FAN3_PRSNT", "FAN4_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT", + "FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT", + "FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT", + "FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <218 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL", + "FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL", + "FAN2_POWER_FAIL", "FAN3_POWER_FAIL", + "FAN4_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; + }; + // FCB 2 + imux17: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R", + "P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R", + "FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R", + "FCB_2_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N", + "INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N", + "FCB_2_TMP75_ALERT_N", "", + "", "", + "FAN5_PRSNT", "FAN6_PRSNT", + "FAN7_PRSNT", "FAN8_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT", + "FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT", + "FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT", + "FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <220 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL", + "FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL", + "FAN6_POWER_FAIL", "FAN7_POWER_FAIL", + "FAN8_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; + }; + // FCB 3 + imux18: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R", + "P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R", + "FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R", + "FCB_3_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N", + "INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N", + "FCB_3_TMP75_ALERT_N", "", + "", "", + "FAN9_PRSNT", "FAN10_PRSNT", + "FAN11_PRSNT", "FAN12_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT", + "FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT", + "FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT", + "FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <230 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL", + "FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL", + "FAN10_POWER_FAIL", "FAN11_POWER_FAIL", + "FAN12_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; + }; + // FCB 4 + imux19: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R", + "P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R", + "FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R", + "FCB_4_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N", + "INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N", + "FCB_4_TMP75_ALERT_N", "", + "", "", + "FAN13_PRSNT", "FAN14_PRSNT", + "FAN15_PRSNT", "FAN16_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT", + "FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT", + "FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT", + "FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <232 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL", + "FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL", + "FAN14_POWER_FAIL", "FAN15_POWER_FAIL", + "FAN16_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; + }; + // FCB 5 + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R", + "P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R", + "FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R", + "FCB_5_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N", + "INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N", + "FCB_5_TMP75_ALERT_N", "", + "", "", + "FAN20_PRSNT", "FAN19_PRSNT", + "FAN18_PRSNT", "FAN17_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT", + "FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT", + "FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT", + "FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <254 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL", + "FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL", + "FAN19_POWER_FAIL", "FAN18_POWER_FAIL", + "FAN17_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; + }; + // FCB 6 + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + gpio@11 { + compatible = "nxp,pca9555"; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R", + "P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R", + "FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R", + "FCB_6_PWRGD_P3V3_R", "", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N", + "INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N", + "FCB_6_TMP75_ALERT_N", "", + "", "", + "FAN24_PRSNT", "FAN23_PRSNT", + "FAN22_PRSNT", "FAN21_PRSNT", + "", "", + "", ""; + }; + + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT", + "FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT", + "FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT", + "FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT", + "", "", + "", "", + "", "", + "", ""; + }; + + gpio@17 { + compatible = "nxp,pca9555"; + reg = <0x17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <252 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL", + "FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL", + "FAN23_POWER_FAIL", "FAN22_POWER_FAIL", + "FAN21_POWER_FAIL", "", + "", "", + "", "", + "", "", + "", ""; + }; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@72 { + compatible = "nxp,pca9545"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + + i2c-mux@72 { + compatible = "nxp,pca9545"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux30: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux31: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-mux@72 { + compatible = "nxp,pca9545"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + i2c-mux@72 { + compatible = "nxp,pca9545"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + imux36: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux37: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux38: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux39: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&i2c12 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux40: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux41: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux42: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux43: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c13 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux44: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux45: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux46: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux47: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c14 { + status = "okay"; + multi-master; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&adc0 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","BLADE_UART_SEL2","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","BLADE_UART_SEL0","","","", + /*M0-M7*/ "","","","","","BLADE_UART_SEL1","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","power-chassis-control","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","host0-ready", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","BAT_DETECT","","power-chassis-good","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","BLADE_UART_SEL3","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&sgpiom0 { + gpio-line-names = + /*"input pin","output pin"*/ + /*A0 - A7*/ + "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N", + "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N", + "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N", + "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N", + "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N", + "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N", + "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N", + "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N", + /*B0 - B7*/ + "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N", + "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N", + "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N", + "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N", + "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N", + "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N", + "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N", + "PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N", + /*C0 - C7*/ + "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N", + "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N", + "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N", + "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N", + "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N", + "PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N", + "PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N", + "PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N", + /*D0 - D7*/ + "PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N", + "PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N", + "PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N", + "PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N", + "PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N", + "PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N", + "PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N", + "PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N", + /*E0 - E7*/ + "PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N", + "PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N", + "PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N", + "PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N", + "PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N", + "PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N", + "PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N", + "PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N", + /*F0 - F7*/ + "PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N", + "PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N", + "PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N", + "PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N", + "PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N", + "PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N", + "PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N", + "PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N", + /*G0 - G7*/ + "PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N", + "PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N", + "PWRGD_FCB_1","FM_BMC_RST_RTCRST_R", + "PWRGD_FCB_2","", + "PWRGD_FCB_3","FM_MDIO_SW_SEL", + "PWRGD_FCB_4","FM_P24V_SMPWR_EN", + "PWRGD_FCB_6","", + "PWRGD_FCB_5","", + /*H0 - H7*/ + "LEAK_DETECT_MTIA_BLADE1_N","", + "LEAK_DETECT_MTIA_BLADE2_N","", + "LEAK_DETECT_MTIA_BLADE3_N","", + "LEAK_DETECT_MTIA_BLADE4_N","", + "LEAK_DETECT_MTIA_BLADE5_N","", + "LEAK_DETECT_MTIA_BLADE6_N","", + "LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N", + "LEAK_DETECT_MTIA_BLADE8_N","", + /*I0 - I7*/ + "LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N", + "LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N", + "LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N", + "LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N", + "LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N", + "LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N", + "LEAK_DETECT_MTIA_BLADE15_N","BMC_READY", + "LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N", + /*J0 - J7*/ + "LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N", + "LEAK_DETECT_NW_BLADE2_N","", + "LEAK_DETECT_NW_BLADE3_N","", + "LEAK_DETECT_NW_BLADE4_N","", + "LEAK_DETECT_NW_BLADE5_N","", + "LEAK_DETECT_NW_BLADE6_N","", + "PWRGD_MTIA_BLADE1_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE2_HSC_PWROK_N","", + /*K0 - K7*/ + "PWRGD_MTIA_BLADE3_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE4_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE5_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE6_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE7_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE8_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE9_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE10_HSC_PWROK_N","", + /*L0 - L7*/ + "PWRGD_MTIA_BLADE11_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE12_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE13_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE14_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE15_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE16_HSC_PWROK_N","", + "PWRGD_NW_BLADE1_HSC_PWROK_N","", + "PWRGD_NW_BLADE2_HSC_PWROK_N","", + /*M0 - M7*/ + "PWRGD_NW_BLADE3_HSC_PWROK_N","", + "PWRGD_NW_BLADE4_HSC_PWROK_N","", + "PWRGD_NW_BLADE5_HSC_PWROK_N","", + "PWRGD_NW_BLADE6_HSC_PWROK_N","", + "RPU_READY","", + "IT_GEAR_RPU_LINK_N","", + "IT_GEAR_LEAK","", + "WATER_VALVE_CLOSED_N","", + /*N0 - N7*/ + "VALVE_STATUS_0","", + "VALVE_STATUS_1","", + "PCA9555_IRQ1_N","", + "PCA9555_IRQ2_N","", + "CR_TOGGLE_BOOT_N","", + "IRQ_FCB_1_N","", + "IRQ_FCB_2_N","", + "CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","", + /*O0 - O7*/ + "CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","", + "BOT_BCB_CABLE_PRSNT_N","", + "TOP_BCB_CABLE_PRSNT_N","", + "IRQ_FCB_3_N","", + "IRQ_FCB_4_N","", + "CHASSIS_LEAK0_DETECT_N","", + "CHASSIS_LEAK1_DETECT_N","", + "PCA9555_IRQ3_N","", + /*P0 - P7*/ + "PCA9555_IRQ4_N","", + "PCA9555_IRQ5_N","", + "CMM_AC_PWR_BTN_N","", + "RPU_READY_SPARE","", + "IT_GEAR_LEAK_SPARE","", + "IT_GEAR_RPU_LINK_SPARE_N","", + "IRQ_FCB_6_N","", + "IRQ_FCB_5_N",""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index 64075cc41d92..29f224bccd63 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -17,6 +17,27 @@ serial6 = &uart7; serial7 = &uart8; serial8 = &uart9; + + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; }; chosen { @@ -32,7 +53,25 @@ compatible = "iio-hwmon"; io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, - <&adc1 0>, <&adc1 1>; + <&adc1 0>, <&adc1 1>, <&adc1 7>; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <33000000>; + }; }; }; @@ -83,12 +122,19 @@ aspeed,ext-pulse-duration = <256>; }; +&wdt2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst2_default>; + aspeed,reset-type = "system"; +}; + &mac2 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii3_default>; use-ncsi; - mlx,multi-host; + mellanox,multi-host; }; &mac3 { @@ -96,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii4_default>; use-ncsi; - mlx,multi-host; + mellanox,multi-host; }; &fmc { @@ -105,15 +151,17 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-rx-bus-width = <4>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; spi-max-frequency = <50000000>; -#include "openbmc-flash-layout-64.dtsi" +#include "openbmc-flash-layout-128.dtsi" }; flash@1 { status = "okay"; m25p,fast-read; - label = "bmc2"; - spi-rx-bus-width = <4>; + label = "alt-bmc"; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; spi-max-frequency = <50000000>; }; }; @@ -129,9 +177,38 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; @@ -146,9 +223,38 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; @@ -163,9 +269,38 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; @@ -180,9 +315,38 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; @@ -197,9 +361,38 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; @@ -214,9 +407,38 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; @@ -231,9 +453,38 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; @@ -248,48 +499,363 @@ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; }; + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + power-sensor@40 { - compatible = "adi,adm1278"; + compatible = "adi,adm1281"; reg = <0x40>; + shunt-resistor-micro-ohms = <500>; }; }; &i2c8 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; bus-frequency = <400000>; i2c-mux@70 { compatible = "nxp,pca9544"; - idle-state = <0>; - i2c-mux-idle-disconnect; reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux17: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux18: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux19: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; }; }; &i2c9 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; bus-frequency = <400000>; i2c-mux@71 { compatible = "nxp,pca9544"; - idle-state = <0>; - i2c-mux-idle-disconnect; reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + imux20: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux21: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux22: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux23: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; }; }; &i2c10 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; bus-frequency = <400000>; + i2c-mux@74 { + compatible = "nxp,pca9544"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + imux28: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "","","","", + "NIC0_MAIN_PWR_EN", + "NIC1_MAIN_PWR_EN", + "NIC2_MAIN_PWR_EN", + "NIC3_MAIN_PWR_EN", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; + }; + }; + + imux29: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; &i2c11 { status = "okay"; power-sensor@10 { - compatible = "adi, adm1272"; + compatible = "adi,adm1272"; reg = <0x10>; }; power-sensor@12 { - compatible = "adi, adm1272"; + compatible = "adi,adm1272"; reg = <0x12>; }; @@ -298,6 +864,20 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <98 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2", + "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R", + "FAN_BOARD_0_REVISION_1_R", + "FAN_BOARD_1_REVISION_0_R", + "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N", + "RST_LED_CONTROL_FAN_BOARD_0_N", + "RST_LED_CONTROL_FAN_BOARD_1_N", + "RST_IOEXP_FAN_BOARD_0_N", + "RST_IOEXP_FAN_BOARD_1_N", + "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R", + "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R", + "", ""; }; gpio@21 { @@ -305,6 +885,19 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <98 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1", + "HSC_OCP_SLOT_ODD_GPIO2", + "HSC_OCP_SLOT_ODD_GPIO3", + "HSC_OCP_SLOT_EVEN_GPIO1", + "HSC_OCP_SLOT_EVEN_GPIO2", + "HSC_OCP_SLOT_EVEN_GPIO3", + "ADC_TYPE_0_R", "ADC_TYPE_1_R", + "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1", + "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE", + "DELTA_MODULE_TYPE", "P12V_HSC_TYPE", + "", ""; }; gpio@22 { @@ -312,6 +905,16 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <98 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2", + "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4", + "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6", + "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8", + "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N", + "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N", + "EN_P48V_AUX_0", "EN_P48V_AUX_1", + "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1"; }; gpio@23 { @@ -319,6 +922,16 @@ reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <98 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N", + "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N", + "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N", + "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N", + "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N", + "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N", + "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N", + "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N"; }; temperature-sensor@48 { @@ -331,66 +944,120 @@ reg = <0x49>; }; - temperature-sensor@4a { - compatible = "ti,tmp75"; - reg = <0x4a>; - }; - - temperature-sensor@4b { - compatible = "ti,tmp75"; - reg = <0x4b>; - }; - eeprom@54 { - compatible = "atmel,24c256"; + compatible = "atmel,24c128"; reg = <0x54>; }; }; &i2c12 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; bus-frequency = <400000>; - temperature-sensor@48 { - compatible = "ti,tmp75"; - reg = <0x48>; - }; + i2c-mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; + imux34: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; - rtc@6f { - compatible = "nuvoton,nct3018y"; - reg = <0x6f>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + imux35: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; &i2c13 { status = "okay"; - bus-frequency = <400000>; + bus-frequency = <100000>; + multi-master; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &i2c14 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; bus-frequency = <400000>; adc@1d { compatible = "ti,adc128d818"; reg = <0x1d>; - ti,mode = /bits/ 8 <2>; + ti,mode = /bits/ 8 <1>; }; - adc@35 { + adc@36 { compatible = "ti,adc128d818"; - reg = <0x35>; - ti,mode = /bits/ 8 <2>; + reg = <0x36>; + ti,mode = /bits/ 8 <1>; }; adc@37 { compatible = "ti,adc128d818"; reg = <0x37>; - ti,mode = /bits/ 8 <2>; + ti,mode = /bits/ 8 <1>; }; power-sensor@40 { @@ -433,43 +1100,67 @@ reg = <0x51>; }; - i2c-mux@71 { - compatible = "nxp,pca9846"; + i2c-mux@73 { + compatible = "nxp,pca9544"; + reg = <0x73>; #address-cells = <1>; #size-cells = <0>; - - idle-state = <0>; i2c-mux-idle-disconnect; - reg = <0x71>; - i2c@0 { + imux32: i2c@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + + imux33: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + }; + + i2c-mux@74 { + compatible = "nxp,pca9546"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + imux30: i2c@0 { reg = <0>; + #address-cells = <1>; + #size-cells = <0>; adc@1f { compatible = "ti,adc128d818"; reg = <0x1f>; - ti,mode = /bits/ 8 <2>; + ti,mode = /bits/ 8 <1>; }; pwm@20{ - compatible = "max31790"; + compatible = "maxim,max31790"; reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; }; gpio@22{ compatible = "ti,tca6424"; reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; }; - pwm@23{ - compatible = "max31790"; - reg = <0x23>; - #address-cells = <1>; - #size-cells = <0>; + pwm@2f{ + compatible = "maxim,max31790"; + reg = <0x2f>; }; adc@33 { @@ -492,34 +1183,32 @@ }; }; - i2c@1 { + imux31: i2c@1 { + reg = <1>; #address-cells = <1>; #size-cells = <0>; - reg = <0>; adc@1f { compatible = "ti,adc128d818"; reg = <0x1f>; - ti,mode = /bits/ 8 <2>; + ti,mode = /bits/ 8 <1>; }; pwm@20{ - compatible = "max31790"; + compatible = "maxim,max31790"; reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; }; gpio@22{ compatible = "ti,tca6424"; reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; }; - pwm@23{ - compatible = "max31790"; - reg = <0x23>; - #address-cells = <1>; - #size-cells = <0>; + pwm@2f{ + compatible = "maxim,max31790"; + reg = <0x2f>; }; adc@33 { @@ -542,61 +1231,93 @@ }; }; }; +}; - i2c-mux@73 { +&i2c15 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + multi-master; + bus-frequency = <400000>; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + i2c-mux@72 { compatible = "nxp,pca9544"; + reg = <0x72>; #address-cells = <1>; #size-cells = <0>; - idle-state = <0>; - i2c-mux-idle-disconnect; - reg = <0x73>; - - i2c@0 { + imux24: i2c@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; - reg = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; - adc@35 { - compatible = "maxim,max11617"; - reg = <0x35>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; }; }; - i2c@1 { + imux25: i2c@1 { + reg = <1>; #address-cells = <1>; #size-cells = <0>; - reg = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; - adc@35 { - compatible = "maxim,max11617"; - reg = <0x35>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; }; }; - }; -}; -&i2c15 { - status = "okay"; - mctp-controller; - multi-master; - bus-frequency = <400000>; + imux26: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; - mctp@10 { - compatible = "mctp-i2c-controller"; - reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; - }; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; - i2c-mux@72 { - compatible = "nxp,pca9544"; - idle-state = <0>; - i2c-mux-idle-disconnect; - reg = <0x72>; + imux27: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; }; }; &adc0 { - ref_voltage = <2500>; status = "okay"; pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default &pinctrl_adc2_default &pinctrl_adc3_default @@ -605,12 +1326,11 @@ }; &adc1 { - ref_voltage = <2500>; status = "okay"; - pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc15_default>; }; - &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts index 6bf2ff85a40e..5143f85fbd70 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts @@ -95,7 +95,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; use-ncsi; - mlx,multi-host; + mellanox,multi-host; }; &adc { diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts new file mode 100644 index 000000000000..839aad4ddd91 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. +/dts-v1/; + +#include "aspeed-bmc-ibm-blueridge.dts" + +/ { + model = "Blueridge 4U"; +}; + +&i2c3 { + power-supply@6a { + compatible = "ibm,cffps"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts new file mode 100644 index 000000000000..bc4c46235421 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts @@ -0,0 +1,1688 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include "aspeed-g6.dtsi" +#include "ibm-power11-quad.dtsi" + +/ { + model = "Blueridge 2U"; + compatible = "ibm,blueridge-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + i2c16 = &i2c2mux0; + i2c17 = &i2c2mux1; + i2c18 = &i2c2mux2; + i2c19 = &i2c2mux3; + i2c20 = &i2c4mux0chn0; + i2c21 = &i2c4mux0chn1; + i2c22 = &i2c4mux0chn2; + i2c23 = &i2c5mux0chn0; + i2c24 = &i2c5mux0chn1; + i2c25 = &i2c6mux0chn0; + i2c26 = &i2c6mux0chn1; + i2c27 = &i2c6mux0chn2; + i2c28 = &i2c6mux0chn3; + i2c29 = &i2c11mux0chn0; + i2c30 = &i2c11mux0chn1; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + event_log: region@b3d00000 { + reg = <0xb3d00000 0x100000>; + no-map; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + reg = <0xb4000000 0x04000000>; /* 64M */ + no-map; + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + no-map; + }; + }; + + i2c-mux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c2>; + idle-state = <0>; + mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, + <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; + + i2c2mux0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2mux1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2mux2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2mux3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* BMC Card fault LED at the back */ + led-bmc-ingraham0 { + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure ID LED at the back */ + led-rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure fault LED at the back */ + led-rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + + /* PCIE slot power LED */ + led-pcieslot-power { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + label = "fan0-presence"; + linux,code = <6>; + }; + + event-fan1-presence { + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + label = "fan1-presence"; + linux,code = <7>; + }; + + event-fan2-presence { + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + label = "fan2-presence"; + linux,code = <8>; + }; + + event-fan3-presence { + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + label = "fan3-presence"; + linux,code = <9>; + }; + + event-fan4-presence { + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; + label = "fan4-presence"; + linux,code = <10>; + }; + + event-fan5-presence { + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; + label = "fan5-presence"; + linux,code = <11>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","", + "factory-reset-toggle","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","", + "", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","led-pcieslot-power","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","", + "", + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", + "power-ffs-sync-history","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + i2c3-mux-oe-n-hog { + gpio-hog; + gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; + line-name = "I2C3_MUX_OE_N"; + output-high; + }; + + usb-power-hog { + gpio-hog; + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; +}; + +&ibt { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + gpio@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "", + "RUSSEL_FW_I2C_ENABLE_N", + "RUSSEL_OPPANEL_PRESENCE_N", + "BLYTH_OPPANEL_PRESENCE_N", + "CPU_TPM_CARD_PRESENT_N", + "DASD_BP2_PRESENT_N", + "DASD_BP1_PRESENT_N", + "DASD_BP0_PRESENT_N"; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", + "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", + "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", + "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", + "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", + "", "", "", "", "", ""; + }; +}; + +&i2c4 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c4mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard0-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard0-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c4mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + + i2c4mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard3-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard3-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard4-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard4-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c6mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + + i2c6mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c6mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c7 { + multi-master; + status = "okay"; + + led-controller@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "pcieslot0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "pcieslot1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "pcieslot2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "pcieslot3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "pcieslot4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "cpu1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "cpu-vrm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "lcd-russel"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "ddimm10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "ddimm11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "ddimm12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "ddimm13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "ddimm14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "ddimm15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@32 { + compatible = "ibm,pca9552"; + reg = <0x32>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm16"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm17"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm18"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm20"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm21"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm22"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm23"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm24"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm25"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "ddimm26"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "ddimm27"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "ddimm28"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "ddimm29"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "ddimm30"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "ddimm31"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "planar"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cpu0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "dasd-pyramid0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "dasd-pyramid1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "dasd-pyramid2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "cpu0-vrm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "rtc-battery"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "base-blyth"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "pcieslot6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "pcieslot7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "pcieslot8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "pcieslot9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "pcieslot10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "pcieslot11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "tpm-wilson"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + humidity-sensor@40 { + compatible = "silabs,si7020"; + reg = <0x40>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + pwm@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "front-sys-id0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "front-check-log0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "front-enc-fault1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "front-sys-pwron0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca0: led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "fan0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "fan1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "fan2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "fan3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "fan4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "fan5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + lcd-controller@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + pressure-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c8 { + status = "okay"; + + pmic@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES", + "", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N", + "power-config-full-load", ""; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", + "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", + "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", + "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", + "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", + "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", + "", "", "", ""; + }; + +}; + +&i2c9 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + temperature-sensor@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c10 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + temperature-sensor@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c11mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard10-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard10-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c11mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&event_log>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c14 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme16"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme17"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme18"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme20"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme21"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme22"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme23"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts index cad1b9aac97b..7364adc6b80d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts @@ -488,7 +488,7 @@ #gpio-cells = <2>; led@0 { - label = "nvme0"; + label = "nvme3"; reg = <0>; retain-state-shutdown; default-state = "keep"; @@ -496,7 +496,7 @@ }; led@1 { - label = "nvme1"; + label = "nvme2"; reg = <1>; retain-state-shutdown; default-state = "keep"; @@ -504,7 +504,7 @@ }; led@2 { - label = "nvme2"; + label = "nvme1"; reg = <2>; retain-state-shutdown; default-state = "keep"; @@ -512,7 +512,7 @@ }; led@3 { - label = "nvme3"; + label = "nvme0"; reg = <3>; retain-state-shutdown; default-state = "keep"; @@ -570,11 +570,6 @@ status = "okay"; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts index 214b2e6a4c6d..9961508ee872 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts @@ -353,6 +353,33 @@ "presence-base-op", ""; }; + + led-controller@63 { + compatible = "nxp,pca9552"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-vrm-c12", + "presence-vrm-c13", + "presence-vrm-c15", + "presence-vrm-c16", + "presence-vrm-c17", + "presence-vrm-c18", + "presence-vrm-c20", + "presence-vrm-c21", + "presence-vrm-c54", + "presence-vrm-c55", + "presence-vrm-c57", + "presence-vrm-c58", + "presence-vrm-c59", + "presence-vrm-c60", + "presence-vrm-c62", + "presence-vrm-c63"; + }; }; &i2c1 { @@ -2486,11 +2513,6 @@ status = "okay"; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts new file mode 100644 index 000000000000..9a43fc7bcebe --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts @@ -0,0 +1,3903 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include "aspeed-g6.dtsi" +#include "ibm-power11-quad.dtsi" + +/ { + model = "Fuji"; + compatible = "ibm,fuji-bmc", "aspeed,ast2600"; + + aliases { + i2c500 = &cfam4_i2c0; + i2c501 = &cfam4_i2c1; + i2c510 = &cfam4_i2c10; + i2c511 = &cfam4_i2c11; + i2c512 = &cfam4_i2c12; + i2c513 = &cfam4_i2c13; + i2c514 = &cfam4_i2c14; + i2c515 = &cfam4_i2c15; + i2c602 = &cfam5_i2c2; + i2c603 = &cfam5_i2c3; + i2c610 = &cfam5_i2c10; + i2c611 = &cfam5_i2c11; + i2c614 = &cfam5_i2c14; + i2c615 = &cfam5_i2c15; + i2c616 = &cfam5_i2c16; + i2c617 = &cfam5_i2c17; + i2c700 = &cfam6_i2c0; + i2c701 = &cfam6_i2c1; + i2c710 = &cfam6_i2c10; + i2c711 = &cfam6_i2c11; + i2c712 = &cfam6_i2c12; + i2c713 = &cfam6_i2c13; + i2c714 = &cfam6_i2c14; + i2c715 = &cfam6_i2c15; + i2c802 = &cfam7_i2c2; + i2c803 = &cfam7_i2c3; + i2c810 = &cfam7_i2c10; + i2c811 = &cfam7_i2c11; + i2c814 = &cfam7_i2c14; + i2c815 = &cfam7_i2c15; + i2c816 = &cfam7_i2c16; + i2c817 = &cfam7_i2c17; + + i2c16 = &i2c4mux0chn0; + i2c17 = &i2c4mux0chn1; + i2c18 = &i2c4mux0chn2; + i2c19 = &i2c5mux0chn0; + i2c20 = &i2c5mux0chn1; + i2c21 = &i2c5mux0chn2; + i2c22 = &i2c5mux0chn3; + i2c23 = &i2c6mux0chn0; + i2c24 = &i2c6mux0chn1; + i2c25 = &i2c6mux0chn2; + i2c26 = &i2c6mux0chn3; + i2c27 = &i2c14mux0chn0; + i2c28 = &i2c14mux0chn1; + i2c29 = &i2c14mux0chn2; + i2c30 = &i2c14mux0chn3; + i2c31 = &i2c14mux1chn0; + i2c32 = &i2c14mux1chn1; + i2c33 = &i2c14mux1chn2; + i2c34 = &i2c14mux1chn3; + i2c35 = &i2c15mux0chn0; + i2c36 = &i2c15mux0chn1; + i2c37 = &i2c15mux0chn2; + i2c38 = &i2c15mux0chn3; + i2c39 = &i2c15mux1chn0; + i2c40 = &i2c15mux1chn1; + i2c41 = &i2c15mux1chn2; + i2c42 = &i2c15mux1chn3; + i2c43 = &i2c15mux2chn0; + i2c44 = &i2c15mux2chn1; + i2c45 = &i2c15mux2chn2; + i2c46 = &i2c15mux2chn3; + i2c47 = &i2c8mux0chn0; + i2c48 = &i2c8mux0chn1; + + serial4 = &uart5; + + sbefifo500 = &sbefifo500; + sbefifo501 = &sbefifo501; + sbefifo510 = &sbefifo510; + sbefifo511 = &sbefifo511; + sbefifo512 = &sbefifo512; + sbefifo513 = &sbefifo513; + sbefifo514 = &sbefifo514; + sbefifo515 = &sbefifo515; + sbefifo602 = &sbefifo602; + sbefifo603 = &sbefifo603; + sbefifo610 = &sbefifo610; + sbefifo611 = &sbefifo611; + sbefifo614 = &sbefifo614; + sbefifo615 = &sbefifo615; + sbefifo616 = &sbefifo616; + sbefifo617 = &sbefifo617; + sbefifo700 = &sbefifo700; + sbefifo701 = &sbefifo701; + sbefifo710 = &sbefifo710; + sbefifo711 = &sbefifo711; + sbefifo712 = &sbefifo712; + sbefifo713 = &sbefifo713; + sbefifo714 = &sbefifo714; + sbefifo715 = &sbefifo715; + sbefifo802 = &sbefifo802; + sbefifo803 = &sbefifo803; + sbefifo810 = &sbefifo810; + sbefifo811 = &sbefifo811; + sbefifo814 = &sbefifo814; + sbefifo815 = &sbefifo815; + sbefifo816 = &sbefifo816; + sbefifo817 = &sbefifo817; + + scom500 = &scom500; + scom501 = &scom501; + scom510 = &scom510; + scom511 = &scom511; + scom512 = &scom512; + scom513 = &scom513; + scom514 = &scom514; + scom515 = &scom515; + scom602 = &scom602; + scom603 = &scom603; + scom610 = &scom610; + scom611 = &scom611; + scom614 = &scom614; + scom615 = &scom615; + scom616 = &scom616; + scom617 = &scom617; + scom700 = &scom700; + scom701 = &scom701; + scom710 = &scom710; + scom711 = &scom711; + scom712 = &scom712; + scom713 = &scom713; + scom714 = &scom714; + scom715 = &scom715; + scom802 = &scom802; + scom803 = &scom803; + scom810 = &scom810; + scom811 = &scom811; + scom814 = &scom814; + scom815 = &scom815; + scom816 = &scom816; + scom817 = &scom817; + + spi50 = &cfam4_spi0; + spi51 = &cfam4_spi1; + spi52 = &cfam4_spi2; + spi53 = &cfam4_spi3; + spi60 = &cfam5_spi0; + spi61 = &cfam5_spi1; + spi62 = &cfam5_spi2; + spi63 = &cfam5_spi3; + spi70 = &cfam6_spi0; + spi71 = &cfam6_spi1; + spi72 = &cfam6_spi2; + spi73 = &cfam6_spi3; + spi80 = &cfam7_spi0; + spi81 = &cfam7_spi1; + spi82 = &cfam7_spi2; + spi83 = &cfam7_spi3; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + event_log: region@b3d00000 { + reg = <0xb3d00000 0x100000>; + no-map; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + reg = <0xb4000000 0x04000000>; /* 64M */ + no-map; + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + no-map; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + label = "fan0-presence"; + linux,code = <15>; + }; + + event-fan1-presence { + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + label = "fan1-presence"; + linux,code = <14>; + }; + + event-fan2-presence { + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + label = "fan2-presence"; + linux,code = <13>; + }; + + event-fan3-presence { + gpios = <&pca0 12 GPIO_ACTIVE_LOW>; + label = "fan3-presence"; + linux,code = <12>; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* RTC battery fault LED at the back */ + led-rtc-battery { + gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>; + }; + + /* BMC Card fault LED at the back */ + led-bmc { + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure Identify LED at the back */ + led-rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure fault LED at the back */ + led-rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + + /* PCIE slot power LED */ + led-pcieslot-power { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","", + "factory-reset-toggle","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","", + "","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","led-pcieslot-power","","","", + /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","", + "I2C_FLASH_MICRO_N","","", + /*S0-S7*/ "","","","","power-ffs-sync-history","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + usb-power-hog { + gpio-hog; + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@62 { + compatible = "nxp,pca9552"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-ps0", + "presence-ps1", + "presence-ps2", + "presence-ps3", + "presence-pdb", + "presence-tpm", + "", "", + "presence-cp0", + "presence-cp1", + "presence-cp2", + "presence-cp3", + "presence-dasd", + "presence-lcd-op", + "presence-base-op", + ""; + }; + + led-controller@63 { + compatible = "nxp,pca9552"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-vrm-c12", + "presence-vrm-c13", + "presence-vrm-c15", + "presence-vrm-c16", + "presence-vrm-c17", + "presence-vrm-c18", + "presence-vrm-c20", + "presence-vrm-c21", + "presence-vrm-c54", + "presence-vrm-c55", + "presence-vrm-c57", + "presence-vrm-c58", + "presence-vrm-c59", + "presence-vrm-c60", + "presence-vrm-c62", + "presence-vrm-c63"; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; + + power-supply@6d { + compatible = "ibm,cffps"; + reg = <0x6d>; + }; +}; + +&i2c4 { + status = "okay"; + + led-controller@65 { + compatible = "nxp,pca9552"; + reg = <0x65>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-cable-card1", + "presence-cable-card2", + "presence-cable-card3", + "presence-cable-card4", + "presence-cable-card5", + "expander-cable-card1", + "expander-cable-card2", + "expander-cable-card3", + "expander-cable-card4", + "expander-cable-card5"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c4mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c01-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c01-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c4mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c02-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c02-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c4mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c03-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c03-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + led-controller@66 { + compatible = "nxp,pca9552"; + reg = <0x66>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-cable-card6", + "presence-cable-card7", + "presence-cable-card8", + "presence-cable-card9", + "presence-cable-card10", + "presence-cable-card11", + "expander-cable-card6", + "expander-cable-card7", + "expander-cable-card8", + "expander-cable-card9", + "expander-cable-card10", + "expander-cable-card11"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c04-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c04-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c05-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c05-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c06-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c06-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + led-controller@63 { + compatible = "nxp,pca9551"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c07-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c07-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c08-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c08-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c6mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c09-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c09-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c6mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + led-controller@63 { + compatible = "nxp,pca9551"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c10-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c10-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c6mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c11-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c11-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; + + led-controller@65 { + compatible = "nxp,pca9552"; + reg = <0x65>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "pcieslot-c01"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "pcieslot-c02"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "pcieslot-c03"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "pcieslot-c04"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "pcieslot-c05"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "pcieslot-c06"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "pcieslot-c07"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "pcieslot-c08"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "pcieslot-c09"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "pcieslot-c10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "pcieslot-c11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + led-controller@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "ddimm10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "ddimm11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "ddimm12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "ddimm13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "ddimm14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "ddimm15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@32 { + compatible = "ibm,pca9552"; + reg = <0x32>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm16"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm17"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm18"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm20"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm21"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm22"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm23"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm24"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm25"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "ddimm26"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "ddimm27"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "ddimm28"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "ddimm29"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "ddimm30"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "ddimm31"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm32"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm33"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm34"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm35"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm36"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm37"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm38"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm39"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm40"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm41"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "ddimm42"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "ddimm43"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "ddimm44"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "ddimm45"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "ddimm46"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "ddimm47"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm48"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm49"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm50"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm51"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm52"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm53"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm54"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm55"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm56"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm57"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "ddimm58"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "ddimm59"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "ddimm60"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "ddimm61"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "ddimm62"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "ddimm63"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@34 { + compatible = "ibm,pca9552"; + reg = <0x34>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "planar"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "tpm"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "cpu3-c61"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "cpu0-c14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "opencapi-connector3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "opencapi-connector4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "opencapi-connector5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "vrm4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "vrm5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "vrm6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "vrm7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "vrm12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "vrm13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "vrm14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "vrm15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@35 { + compatible = "ibm,pca9552"; + reg = <0x35>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "dasd-backplane"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "power-distribution"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "cpu1-c19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "cpu2-c56"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "opencapi-connector0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "opencapi-connector1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "opencapi-connector2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "vrm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "vrm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "vrm2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "vrm3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "vrm8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "vrm9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@e { + reg = <14>; + default-state = "keep"; + label = "vrm10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@f { + reg = <15>; + default-state = "keep"; + label = "vrm11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pmic@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>; + + i2c8mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c8mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c11 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&event_log>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c14 { + multi-master; + status = "okay"; + + lcd-controller@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + idle-state = <1>; + + i2c14mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c14mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + }; + + i2c14mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "front-sys-id0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "front-check-log0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "front-enc-fault1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "front-sys-pwron0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c14mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pwm@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "nvme8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "nvme9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@a { + reg = <10>; + default-state = "keep"; + label = "fan0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@b { + reg = <11>; + default-state = "keep"; + label = "fan1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@c { + reg = <12>; + default-state = "keep"; + label = "fan2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@d { + reg = <13>; + default-state = "keep"; + label = "fan3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca0: led-controller@61 { + compatible = "nxp,pca9552"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x61>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "","","","", + "","","","", + "","","","", + "presence-fan3", + "presence-fan2", + "presence-fan1", + "presence-fan0"; + }; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c14mux1chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c15 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux1chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux2chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c15mux2chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <210>, <228>; +}; + +&ibt { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + +&fsi_hub0 { + cfam@4,0 { /* DCM2_C0 */ + reg = <4 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <4>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam4_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom500: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo500: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom501: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo501: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom510: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo510: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom511: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo511: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom512: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo512: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom513: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo513: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom514: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo514: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom515: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo515: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam4_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam4_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam4_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam4_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@5,0 { /* DCM2_C1 */ + reg = <5 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <5>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam5_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom602: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo602: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom603: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo603: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom610: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo610: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom611: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo611: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom614: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo614: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom615: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo615: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom616: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo616: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom617: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo617: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam5_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam5_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam5_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam5_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@6,0 { /* DCM3_C0 */ + reg = <6 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <6>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam6_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom700: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo700: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom701: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo701: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom710: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo710: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom711: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo711: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom712: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo712: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom713: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo713: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom714: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo714: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom715: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo715: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam6_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam6_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam6_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam6_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@7,0 { /* DCM3_C1 */ + reg = <7 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <7>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam7_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom802: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo802: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom803: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo803: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom810: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo810: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom811: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo811: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom814: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo814: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom815: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo815: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom816: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo816: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom817: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo817: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam7_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam7_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam7_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam7_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts index 5cb0094e21e0..638a2c1c7892 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts @@ -109,22 +109,22 @@ compatible = "gpio-leds"; /* BMC Card fault LED at the back */ - bmc-ingraham0 { + led-bmc-ingraham0 { gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; }; /* Enclosure ID LED at the back */ - rear-enc-id0 { + led-rear-enc-id0 { gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; }; /* Enclosure fault LED at the back */ - rear-enc-fault0 { + led-rear-enc-fault0 { gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; }; /* PCIE slot power LED */ - pcieslot-power { + led-pcieslot-power { gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; }; }; @@ -203,7 +203,7 @@ /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","", /*G0-G7*/ "","","","","","","","", - /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", + /*H0-H7*/ "","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","", /*I0-I7*/ "","","","","","","bmc-secure-boot","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", @@ -211,7 +211,7 @@ /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","usb-power","","","","", - /*P0-P7*/ "","","","","pcieslot-power","","","", + /*P0-P7*/ "","","","","led-pcieslot-power","","","", /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", @@ -1280,8 +1280,9 @@ #gpio-cells = <2>; gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "power-config-full-load", ""; + "", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES", + "", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N", + "power-config-full-load", ""; }; pca_pres2: pca9552@61 { @@ -1722,11 +1723,6 @@ status = "okay"; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts new file mode 100644 index 000000000000..8d98be3d5f2e --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts @@ -0,0 +1,6086 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2024 IBM Corp. +/dts-v1/; +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/i2c/i2c.h> +#include "aspeed-g6.dtsi" + +/ { + model = "IBM SBP1"; + compatible = "ibm,sbp1-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "LED_BMC_READY"; + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + retain-state-suspended; + panic-indicator; + }; + + led-id-tpm { + label = "LED_ID_TPM"; + gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-bat { + label = "LED_ID_BAT"; + gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-mgmt-port2 { + label = "LED_ID_MGMT_PORT2"; + gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-mgmt-port1 { + label = "LED_ID_MGMT_PORT1"; + gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic1-port1 { + label = "LED_ID_NIC1_PORT1"; + gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic1-port2 { + label = "LED_ID_NIC1_PORT2"; + gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic2-port1 { + label = "LED_ID_NIC2_PORT1"; + gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic2-port2 { + label = "LED_ID_NIC2_PORT2"; + gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-m2-ssd2 { + label = "LED_ID_M2_SSD2"; + gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-m2-ssd1 { + label = "LED_ID_M2_SSD1"; + gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dwr-frnt-p { + label = "LED_ID_DWR_FRNT_P"; + gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + + default-state = "on"; + retain-state-suspended; + retain-state-shutdown; + }; + + led-pwr-dwr-frnt { + label = "LED_PWR_DWR_FRNT"; + gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + + retain-state-suspended; + retain-state-shutdown; + }; + + led-pwr-dwr-back { + label = "LED_PWR_DWR_BACK"; + gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + + retain-state-suspended; + retain-state-shutdown; + }; + + led-id-dwr-back-p { + label = "LED_ID_DWR_BACK_P"; + gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + + default-state = "on"; + retain-state-suspended; + retain-state-shutdown; + }; + + led-id-cpu0 { + label = "LED_ID_CPU0"; + gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-cpu1 { + label = "LED_ID_CPU1"; + gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-cpu2 { + label = "LED_ID_CPU2"; + gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-cpu3 { + label = "LED_ID_CPU3"; + gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0e2 { + label = "LED_ID_DIMM_C0E2"; + gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0e1 { + label = "LED_ID_DIMM_C0E1"; + gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0f2 { + label = "LED_ID_DIMM_C0F2"; + gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0f1 { + label = "LED_ID_DIMM_C0F1"; + gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0g2 { + label = "LED_ID_DIMM_C0G2"; + gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0g1 { + label = "LED_ID_DIMM_C0G1"; + gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0h2 { + label = "LED_ID_DIMM_C0H2"; + gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0h1 { + label = "LED_ID_DIMM_C0H1"; + gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0a2 { + label = "LED_ID_DIMM_C0A2"; + gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0a1 { + label = "LED_ID_DIMM_C0A1"; + gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0b2 { + label = "LED_ID_DIMM_C0B2"; + gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0b1 { + label = "LED_ID_DIMM_C0B1"; + gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0c2 { + label = "LED_ID_DIMM_C0C2"; + gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0c1 { + label = "LED_ID_DIMM_C0C1"; + gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0d2 { + label = "LED_ID_DIMM_C0D2"; + gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0d1 { + label = "LED_ID_DIMM_C0D1"; + gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1e2 { + label = "LED_ID_DIMM_C1E2"; + gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1e1 { + label = "LED_ID_DIMM_C1E1"; + gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1f2 { + label = "LED_ID_DIMM_C1F2"; + gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1f1 { + label = "LED_ID_DIMM_C1F1"; + gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1g2 { + label = "LED_ID_DIMM_C1G2"; + gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1g1 { + label = "LED_ID_DIMM_C1G1"; + gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1h2 { + label = "LED_ID_DIMM_C1H2"; + gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1h1 { + label = "LED_ID_DIMM_C1H1"; + gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1a2 { + label = "LED_ID_DIMM_C1A2"; + gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1a1 { + label = "LED_ID_DIMM_C1A1"; + gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1b2 { + label = "LED_ID_DIMM_C1B2"; + gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1b1 { + label = "LED_ID_DIMM_C1B1"; + gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1c2 { + label = "LED_ID_DIMM_C1C2"; + gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1c1 { + label = "LED_ID_DIMM_C1C1"; + gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1d2 { + label = "LED_ID_DIMM_C1D2"; + gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1d1 { + label = "LED_ID_DIMM_C1D1"; + gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2e2 { + label = "LED_ID_DIMM_C2E2"; + gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2e1 { + label = "LED_ID_DIMM_C2E1"; + gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2f2 { + label = "LED_ID_DIMM_C2F2"; + gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2f1 { + label = "LED_ID_DIMM_C2F1"; + gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2g2 { + label = "LED_ID_DIMM_C2G2"; + gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2g1 { + label = "LED_ID_DIMM_C2G1"; + gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2h2 { + label = "LED_ID_DIMM_C2H2"; + gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2h1 { + label = "LED_ID_DIMM_C2H1"; + gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2a2 { + label = "LED_ID_DIMM_C2A2"; + gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2a1 { + label = "LED_ID_DIMM_C2A1"; + gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2b2 { + label = "LED_ID_DIMM_C2B2"; + gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2b1 { + label = "LED_ID_DIMM_C2B1"; + gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2c2 { + label = "LED_ID_DIMM_C2C2"; + gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2c1 { + label = "LED_ID_DIMM_C2C1"; + gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2d2 { + label = "LED_ID_DIMM_C2D2"; + gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2d1 { + label = "LED_ID_DIMM_C2D1"; + gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3e2 { + label = "LED_ID_DIMM_C3E2"; + gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3e1 { + label = "LED_ID_DIMM_C3E1"; + gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3f2 { + label = "LED_ID_DIMM_C3F2"; + gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3f1 { + label = "LED_ID_DIMM_C3F1"; + gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3g2 { + label = "LED_ID_DIMM_C3G2"; + gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3g1 { + label = "LED_ID_DIMM_C3G1"; + gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3h2 { + label = "LED_ID_DIMM_C3H2"; + gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3h1 { + label = "LED_ID_DIMM_C3H1"; + gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3a2 { + label = "LED_ID_DIMM_C3A2"; + gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3a1 { + label = "LED_ID_DIMM_C3A1"; + gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3b2 { + label = "LED_ID_DIMM_C3B2"; + gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3b1 { + label = "LED_ID_DIMM_C3B1"; + gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3c2 { + label = "LED_ID_DIMM_C3C2"; + gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3c1 { + label = "LED_ID_DIMM_C3C1"; + gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3d2 { + label = "LED_ID_DIMM_C3D2"; + gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3d1 { + label = "LED_ID_DIMM_C3D1"; + gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd01 { + label = "LED_ID_RSSD01"; + gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd02 { + label = "LED_ID_RSSD02"; + gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd03 { + label = "LED_ID_RSSD03"; + gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd04 { + label = "LED_ID_RSSD04"; + gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd05 { + label = "LED_ID_RSSD05"; + gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd06 { + label = "LED_ID_RSSD06"; + gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd07 { + label = "LED_ID_RSSD07"; + gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd08 { + label = "LED_ID_RSSD08"; + gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd09 { + label = "LED_ID_RSSD09"; + gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd10 { + label = "LED_ID_RSSD10"; + gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd11 { + label = "LED_ID_RSSD11"; + gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd12 { + label = "LED_ID_RSSD12"; + gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd13 { + label = "LED_ID_RSSD13"; + gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd14 { + label = "LED_ID_RSSD14"; + gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd15 { + label = "LED_ID_RSSD15"; + gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd16 { + label = "LED_ID_RSSD16"; + gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd17 { + label = "LED_ID_RSSD17"; + gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd18 { + label = "LED_ID_RSSD18"; + gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd19 { + label = "LED_ID_RSSD19"; + gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd20 { + label = "LED_ID_RSSD20"; + gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd21 { + label = "LED_ID_RSSD21"; + gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd22 { + label = "LED_ID_RSSD22"; + gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd23 { + label = "LED_ID_RSSD23"; + gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd24 { + label = "LED_ID_RSSD24"; + gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd25 { + label = "LED_ID_RSSD25"; + gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd26 { + label = "LED_ID_RSSD26"; + gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd27 { + label = "LED_ID_RSSD27"; + gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd28 { + label = "LED_ID_RSSD28"; + gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd29 { + label = "LED_ID_RSSD29"; + gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd30 { + label = "LED_ID_RSSD30"; + gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd31 { + label = "LED_ID_RSSD31"; + gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd32 { + label = "LED_ID_RSSD32"; + gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm01 { + label = "LED_ID_FAN_ASM01"; + gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm02 { + label = "LED_ID_FAN_ASM02"; + gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm03 { + label = "LED_ID_FAN_ASM03"; + gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm04 { + label = "LED_ID_FAN_ASM04"; + gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm05 { + label = "LED_ID_FAN_ASM05"; + gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm06 { + label = "LED_ID_FAN_ASM06"; + gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm07 { + label = "LED_ID_FAN_ASM07"; + gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm08 { + label = "LED_ID_FAN_ASM08"; + gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm09 { + label = "LED_ID_FAN_ASM09"; + gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm10 { + label = "LED_ID_FAN_ASM10"; + gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm11 { + label = "LED_ID_FAN_ASM11"; + gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm12 { + label = "LED_ID_FAN_ASM12"; + gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>, + <&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>, + <&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>; + }; + + p12v_vd: voltage-divider1 { + compatible = "voltage-divider"; + io-channels = <&adc1 3>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1127/127 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <15>; + full-ohms = <133>; + }; + + p5v_aux_vd: voltage-divider2 { + compatible = "voltage-divider"; + io-channels = <&adc1 5>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1365/365 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <50>; + full-ohms = <187>; + }; + + p5v_bmc_aux_vd: voltage-divider3 { + compatible = "voltage-divider"; + io-channels = <&adc0 3>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1365/365 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <50>; + full-ohms = <187>; + }; + + p3v3_aux_vd: voltage-divider4 { + compatible = "voltage-divider"; + io-channels = <&adc1 2>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1698/698 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <14>; + full-ohms = <34>; + }; + + p3v3_bmc_aux_vd: voltage-divider5 { + compatible = "voltage-divider"; + io-channels = <&adc0 7>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1698/698 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <14>; + full-ohms = <34>; + }; + + p1v8_bmc_aux_vd: voltage-divider6 { + compatible = "voltage-divider"; + io-channels = <&adc0 6>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 4000/3000 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <3>; + full-ohms = <4>; + }; + + p2V5_aux_vd: voltage-divider7 { + compatible = "voltage-divider"; + io-channels = <&adc1 1>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 2100/1100 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <11>; + full-ohms = <21>; + }; + + p3v3_rtc_vd: voltage-divider8 { + compatible = "voltage-divider"; + io-channels = <&adc1 7>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 231000/100000 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <100>; + full-ohms = <231>; + }; + + thermistor0: thermistor-0 { + compatible = "epcos,b57891s0103"; + pullup-uv = <3300000>; + pullup-ohm = <10000>; + pulldown-ohm = <0>; + io-channels = <&adc0 0>; + #thermal-sensor-cells = <0>; + }; + + thermistor1: thermistor-1 { + compatible = "epcos,b57891s0103"; + pullup-uv = <3300000>; + pullup-ohm = <10000>; + pulldown-ohm = <0>; + io-channels = <&adc0 1>; + #thermal-sensor-cells = <0>; + }; + + thermistor2: thermistor-2 { + compatible = "epcos,b57891s0103"; + pullup-uv = <3300000>; + pullup-ohm = <10000>; + pulldown-ohm = <0>; + io-channels = <&adc0 4>; + #thermal-sensor-cells = <0>; + }; + + thermistor3: thermistor-3 { + compatible = "epcos,b57891s0103"; + pullup-uv = <3300000>; + pullup-ohm = <10000>; + pulldown-ohm = <0>; + io-channels = <&adc0 5>; + #thermal-sensor-cells = <0>; + }; + + p12v: fixedregulator-p12v { + compatible = "regulator-fixed"; + regulator-name = "p12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p3v3_bmc_aux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v2_bmc_aux"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + p12v-a-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_a>; + }; + + p12v-b-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_b>; + }; + + p12v-c-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_c>; + }; + + p12v-d-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_d>; + }; + + pvccinfaon-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu0>; + }; + + pvccfa-ehv-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu0>; + }; + + pvnn-main-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu0>; + }; + + pvccin-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu0>; + }; + + pvccfa-ehv-fivra-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu0>; + }; + + pvccd-hv-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu0>; + }; + + pvpp-hbm-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu0>; + }; + + pvccinfaon-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu1>; + }; + + pvccfa-ehv-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu1>; + }; + + pvnn-main-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu1>; + }; + + pvccin-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu1>; + }; + + pvccfa-ehv-fivra-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu1>; + }; + + pvccd-hv-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu1>; + }; + + pvpp-hbm-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu1>; + }; + + pvccinfaon-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu2>; + }; + + pvccfa-ehv-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu2>; + }; + + pvnn-main-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu2>; + }; + + pvccin-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu2>; + }; + + pvccfa-ehv-fivra-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu2>; + }; + + pvccd-hv-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu2>; + }; + + pvpp-hbm-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu2>; + }; + + pvccinfaon-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu3>; + }; + + pvccfa-ehv-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu3>; + }; + + pvnn-main-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu3>; + }; + + pvccin-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu3>; + }; + + pvccfa-ehv-fivra-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu3>; + }; + + pvccd-hv-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu3>; + }; + + pvpp-hbm-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu3>; + }; + + p1v05-pch-aux-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v05_pch_aux>; + }; + + p1v8-pch-aux-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v8_pch_aux>; + }; + + p3v3-pch-consumer { + compatible = "regulator-output"; + vout-supply = <&p3v3_pch>; + }; + + p5v-consumer { + compatible = "regulator-output"; + vout-supply = <&p5v>; + }; + + smb-m2-ssb-ssd2 { + compatible = "regulator-output"; + vout-supply = <&sw0_smb_m2_ssb_ssd2>; + }; + + smb-m2-ssb-ssd1 { + compatible = "regulator-output"; + vout-supply = <&sw0_smb_m2_ssb_ssd1>; + }; + + ssb-rssd01-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd01>; + }; + + ssb-rssd01-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd01>; + }; + + ssb-rssd02-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd02>; + }; + + ssb-rssd02-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd02>; + }; + + ssb-rssd03-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd03>; + }; + + ssb-rssd03-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd03>; + }; + + ssb-rssd04-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd04>; + }; + + ssb-rssd04-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd04>; + }; + + ssb-rssd05-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd05>; + }; + + ssb-rssd05-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd05>; + }; + + ssb-rssd06-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd06>; + }; + + ssb-rssd06-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd06>; + }; + + ssb-rssd07-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd07>; + }; + + ssb-rssd07-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd07>; + }; + + ssb-rssd08-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd08>; + }; + + ssb-rssd08-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd08>; + }; + + ssb-rssd09-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd09>; + }; + + ssb-rssd09-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd09>; + }; + + ssb-rssd10-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd10>; + }; + + ssb-rssd10-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd10>; + }; + + ssb-rssd11-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd11>; + }; + + ssb-rssd11-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd11>; + }; + + ssb-rssd12-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd12>; + }; + + ssb-rssd12-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd12>; + }; + + ssb-rssd13-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd13>; + }; + + ssb-rssd13-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd13>; + }; + + ssb-rssd14-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd14>; + }; + + ssb-rssd14-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd14>; + }; + + ssb-rssd15-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd15>; + }; + + ssb-rssd15-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd15>; + }; + + ssb-rssd16-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd16>; + }; + + ssb-rssd16-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd16>; + }; + + ssb-rssd17-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd17>; + }; + + ssb-rssd17-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd17>; + }; + + ssb-rssd18-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd18>; + }; + + ssb-rssd18-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd18>; + }; + + ssb-rssd19-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd19>; + }; + + ssb-rssd19-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd19>; + }; + + ssb-rssd20-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd20>; + }; + + ssb-rssd20-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd20>; + }; + + ssb-rssd21-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd21>; + }; + + ssb-rssd21-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd21>; + }; + + ssb-rssd22-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd22>; + }; + + ssb-rssd22-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd22>; + }; + + ssb-rssd23-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd23>; + }; + + ssb-rssd23-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd23>; + }; + + ssb-rssd24-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd24>; + }; + + ssb-rssd24-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd24>; + }; + + ssb-rssd25-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd25>; + }; + + ssb-rssd25-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd25>; + }; + + ssb-rssd26-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd26>; + }; + + ssb-rssd26-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd26>; + }; + + ssb-rssd27-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd27>; + }; + + ssb-rssd27-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd27>; + }; + + ssb-rssd28-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd28>; + }; + + ssb-rssd28-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd28>; + }; + + ssb-rssd29-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd29>; + }; + + ssb-rssd29-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd29>; + }; + + ssb-rssd30-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd30>; + }; + + ssb-rssd30-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd30>; + }; + + ssb-rssd31-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd31>; + }; + + ssb-rssd31-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd31>; + }; + + ssb-rssd32-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd32>; + }; + + ssb-rssd32-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd32>; + }; + + p3v3-nic-consumer { + compatible = "regulator-output"; + vout-supply = <&p3v3_nic>; + }; + + p1v8-nic-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v8_nic>; + }; + + p1v2-nic-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v2_nic>; + }; + + pvcore-nic1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvcore_nic1>; + }; + + pvcore-nic2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvcore_nic2>; + }; +}; + +&peci0 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>, <0x81>; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "disabled"; +}; + +&gpio1 { + status = "disabled"; +}; + +&video { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>; +}; + +&mdio2 { + status = "okay"; + + ethphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; +}; + +&mdio3 { + status = "okay"; + + ethphy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; +}; + +&mac2 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; +}; + +&mac3 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; +}; + +&adc0 { + status = "okay"; + vref-supply = <&p1v8_bmc_aux>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default>; +}; + +&adc1 { + status = "okay"; + vref-supply = <&p1v8_bmc_aux>; + aspeed,battery-sensing; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc15_default>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&gpio0 { + status = "okay"; + gpio-line-names = + /* A0 - A7 */ + "", "", "", "", "", "", "", "", + /* B0 - B7 */ + "", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N", + "PCH_TPM_RESET_N", "PCH_TPM_IRQ_N", + /* C0 - C7 */ + "", "", "", "", "", "", "", "", + /* D0 - D7 */ + "", "", "", "", "", "", "", "", + /* E0 - E7 */ + "", "", "", "", "", "", "", "", + /* F0 - F7 */ + "", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "", + /* G0 - G7 */ + "FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN", + "FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "", + /* H0 - H7 */ + "SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "", + /* I0 - I7 */ + "JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL", + "JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N", + /* J0 - J7 */ + "", "", "", "", "", "", "", "", + /* K0 - K7 */ + "", "", "", "", "", "", "", "", + /* L0 - L7 */ + "", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "", + /* M0 - M7 */ + "BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N", + "BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "", + /* N0 - N7 */ + "IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N", + "FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP", + /* O0 - O7 */ + "CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT", + "H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N", + /* P0 - P7 */ + "PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT", + "FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB", + /* Q0 - Q7 */ + "", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST", + "PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST", + /* R0 - R7 */ + "BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N", + "BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N", + "FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N", + /* S0 - S7 */ + "SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N", + "FM_SSD_CLK_DRVR0_EN", "", "", + /* T0 - T7 */ + "", "", "", "", "", "", "", "", + /* U0 - U7 */ + "", "", "", "", "", "", "", "", + /* V0 - V7 */ + "BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT", + "PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT", + "BMC_MAC0_RESET_N", + /* W0 - W7 */ + "", "", "", "", "", "", "", "", + /* X0 - X7 */ + "", "", "", "", "", "", "", "", + /* Y0 - Y7 */ + "FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "", + "", "", + /* Z0 - Z7 */ + "FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N", + "JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", ""; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_unbiased_default>; +}; + +&pinctrl { + pinctrl_gpio0_unbiased_default: gpio_default { + pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24", + "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15"; + bias-disable; + }; +}; + +&i2c1 { + status = "okay"; + + bmc_mux_nic: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_nic: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>; + + gpio-line-names = + /* GPORT0 */ + "IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN", + "SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N", + "SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N", + /* GPORT1 */ + "FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N", + "FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N", + "SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN", + /* GPORT2 */ + "SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT", + "FM_NIC1_FLASH_PRSNT", "", + /* GPORT3 */ + "FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "", + /* GPORT4 */ + "FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "", + /* GPORT5 */ + "SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", ""; + + pinctrl-0 = <&U62160_pins>; + pinctrl-names = "default"; + U62160_pins: cfg-pins { + pins = "gp03", "gp16", "gp20", "gp50", "gp51"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvcore_nic2: ir38263-pvcore-nic2@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "pvcore_nic2"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pvcore_nic1: ir38263-pvcore-nic1@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "pvcore_nic1"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + p3v3_nic: ir38263-p3v3-nic@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p3v3_nic"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + p1v2_nic: ir38263-p1v2-nic@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p1v2_nic"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + p1v8_nic: ir38263-p1v8-nic@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p1v8_nic"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + i2cmux1: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + smb_m2_ssb_ssd1: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p3v3_aux>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "m2_ssb_ssd1:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_smb_m2_ssb_ssd1: sw0 { + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <2800000>; + regulator-name = "p3v3_m2_ssd1"; + regulator-enable-ramp-delay = <10000>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_m2_ssb_ssd2: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <39 IRQ_TYPE_LEVEL_LOW>; + vss1-supply = <&p3v3_aux>; + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "m2_ssb_ssd2:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_smb_m2_ssb_ssd2: sw0 { + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <2800000>; + regulator-name = "p3v3_m2_ssd2"; + regulator-enable-ramp-delay = <10000>; + }; + }; + }; + }; + + i2c@6 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c4 { + status = "okay"; + multi-master; + bus-frequency = <1000000>; + + bmc-slave@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + + i2c-protocol; + }; +}; + +&i2c5 { + status = "okay"; + + i2cmux2: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + p1v05_pch_aux: ir38263-p1v05-pch-aux@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p1v05_pch_aux"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + p1v8_pch_aux: ir38060-p1v8-pch-aux@40 { + compatible = "infineon,ir38060"; + reg = <0x40>; + + regulator-name = "p1v8_pch_aux"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c14 { + status = "okay"; + + i2cmux13: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu0_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0", + "PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0", + "PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0", + "PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N", + "SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G", + "PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU0_DISABLE_COD_N", "", + "RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD", + "PWRGD_PLT_AUX_CPU0_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N", + "H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N", + "H_LVT3_CPU0_THERMTRIP_OUT_N", "", + "H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1", + "FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1"; + + pinctrl-0 = <&U62080_pins>; + pinctrl-names = "default"; + U62080_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu0@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu0: vout0 { + regulator-name = "pvccinfaon_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu0: vout1 { + regulator-name = "pvccfa_ehv_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu0@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu0: vout { + regulator-name = "pvnn_main_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu0@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu0: vout0 { + regulator-name = "pvccin_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu0: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu0@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu0: vout { + regulator-name = "pvccd_hv_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu0@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu0: vout { + regulator-name = "pvpp_hbm_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + i2cmux4: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu1_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1", + "PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1", + "PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1", + "PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N", + "SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G", + "PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU1_DISABLE_COD_N", "", + "RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD", + "PWRGD_PLT_AUX_CPU1_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N", + "H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N", + "H_LVT3_CPU1_THERMTRIP_OUT_N", "", + "H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1", + "FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1"; + + pinctrl-0 = <&U62090_pins>; + pinctrl-names = "default"; + U62090_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu1@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu1: vout0 { + regulator-name = "pvccinfaon_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu1: vout1 { + regulator-name = "pvccfa_ehv_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu1@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu1: vout { + regulator-name = "pvnn_main_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu1@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu1: vout0 { + regulator-name = "pvccin_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu1: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu1@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu1: vout { + regulator-name = "pvccd_hv_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu1@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu1: vout { + regulator-name = "pvpp_hbm_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + i2cmux3: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu2_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2", + "PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2", + "PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2", + "PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N", + "SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G", + "PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU2_DISABLE_COD_N", "", + "RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD", + "PWRGD_PLT_AUX_CPU2_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N", + "H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N", + "H_LVT3_CPU2_THERMTRIP_OUT_N", "", + "H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1", + "FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1"; + + pinctrl-0 = <&U62100_pins>; + pinctrl-names = "default"; + U62100_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu2@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu2: vout0 { + regulator-name = "pvccinfaon_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu2: vout1 { + regulator-name = "pvccfa_ehv_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu2@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu2: vout { + regulator-name = "pvnn_main_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu2@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu2: vout0 { + regulator-name = "pvccin_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu2: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu2@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu2: vout { + regulator-name = "pvccd_hv_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu2@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu2: vout { + regulator-name = "pvpp_hbm_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c12 { + status = "okay"; + + i2cmux22: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu3_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3", + "PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3", + "PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3", + "PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N", + "SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G", + "PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU3_DISABLE_COD_N", "", + "RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD", + "PWRGD_PLT_AUX_CPU3_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N", + "H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N", + "H_LVT3_CPU3_THERMTRIP_OUT_N", "", + "H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1", + "FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1"; + + pinctrl-0 = <&U62110_pins>; + pinctrl-names = "default"; + U62110_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu3@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu3: vout0 { + regulator-name = "pvccinfaon_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu3: vout1 { + regulator-name = "pvccfa_ehv_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu3@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu3: vout { + regulator-name = "pvnn_main_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu3@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu3: vout0 { + regulator-name = "pvccin_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu3: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu3@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu3: vout { + regulator-name = "pvccd_hv_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu3@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu3: vout { + regulator-name = "pvpp_hbm_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c15 { + status = "okay"; + + i2cmux14: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux15: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux16: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux17: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux18: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux19: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_rssd17_32: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&bmc_pex_irq>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <48 12>; + + gpio-line-names = + /* GPORT0 */ + "RSSD17_SMBRST_N", "RSSD18_SMBRST_N", + "RSSD19_SMBRST_N", "RSSD20_SMBRST_N", + "RSSD21_SMBRST_N", "RSSD22_SMBRST_N", + "RSSD23_SMBRST_N", "RSSD24_SMBRST_N", + /* GPORT1 */ + "RSSD25_SMBRST_N", "RSSD26_SMBRST_N", + "RSSD27_SMBRST_N", "RSSD28_SMBRST_N", + "RSSD29_SMBRST_N", "RSSD30_SMBRST_N", + "RSSD31_SMBRST_N", "RSSD32_SMBRST_N", + /* GPORT2 */ + "RSSD17_PWRDIS", "RSSD18_PWRDIS", + "RSSD19_PWRDIS", "RSSD20_PWRDIS", + /* GPORT3 */ + "RSSD21_PWRDIS", "RSSD22_PWRDIS", + "RSSD23_PWRDIS", "RSSD24_PWRDIS", + "RSSD25_PWRDIS", "RSSD26_PWRDIS", + "RSSD27_PWRDIS", "RSSD28_PWRDIS", + /* GPORT4 */ + "RSSD29_PWRDIS", "RSSD30_PWRDIS", + "RSSD31_PWRDIS", "RSSD32_PWRDIS", + "RSSD17_RESET_N", "RSSD18_RESET_N", + "RSSD19_RESET_N", "RSSD20_RESET_N", + /* GPORT5 */ + "RSSD21_RESET_N", "RSSD22_RESET_N", + "RSSD23_RESET_N", "RSSD24_RESET_N", + "RSSD25_RESET_N", "RSSD26_RESET_N", + "RSSD27_RESET_N", "RSSD28_RESET_N", + /* GPORT6 */ + "RSSD29_RESET_N", "RSSD30_RESET_N", + "RSSD31_RESET_N", "RSSD32_RESET_N", + "", "", + "", "", + /* GPORT7 */ + "", "", + "", "", + "", "", + "", ""; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux20: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux21: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; +}; + +&i2c8 { + status = "okay"; + + i2cmux5: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux6: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux7: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux8: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux9: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux10: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_rssd_01_16: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&bmc_pex_irq>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <48 12>; + + gpio-line-names = + /* GPORT0 */ + "RSSD01_SMBRST_N", "RSSD02_SMBRST_N", + "RSSD03_SMBRST_N", "RSSD04_SMBRST_N", + "RSSD05_SMBRST_N", "RSSD06_SMBRST_N", + "RSSD07_SMBRST_N", "RSSD08_SMBRST_N", + /* GPORT1 */ + "RSSD09_SMBRST_N", "RSSD10_SMBRST_N", + "RSSD11_SMBRST_N", "RSSD12_SMBRST_N", + "RSSD13_SMBRST_N", "RSSD14_SMBRST_N", + "RSSD15_SMBRST_N", "RSSD16_SMBRST_N", + /* GPORT2 */ + "RSSD01_PWRDIS", "RSSD02_PWRDIS", + "RSSD03_PWRDIS", "RSSD04_PWRDIS", + /* GPORT3 */ + "RSSD05_PWRDIS", "RSSD06_PWRDIS", + "RSSD07_PWRDIS", "RSSD08_PWRDIS", + "RSSD09_PWRDIS", "RSSD10_PWRDIS", + "RSSD11_PWRDIS", "RSSD12_PWRDIS", + /* GPORT4 */ + "RSSD13_PWRDIS", "RSSD14_PWRDIS", + "RSSD15_PWRDIS", "RSSD16_PWRDIS", + "RSSD01_RESET_N", "RSSD02_RESET_N", + "RSSD03_RESET_N", "RSSD04_RESET_N", + /* GPORT5 */ + "RSSD05_RESET_N", "RSSD06_RESET_N", + "RSSD07_RESET_N", "RSSD08_RESET_N", + "RSSD09_RESET_N", "RSSD10_RESET_N", + "RSSD11_RESET_N", "RSSD12_RESET_N", + /* GPORT6 */ + "RSSD13_RESET_N", "RSSD14_RESET_N", + "RSSD15_RESET_N", "RSSD16_RESET_N", + "", "", + "", "", + /* GPORT7 */ + "", "", + "", "", + "", "", + "", ""; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux11: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux12: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; +}; + +&i2c13 { + status = "okay"; + + i2cmux23: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_bmc_aux>; + }; +}; + +&i2cmux23 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + smb_pex_vr_ctrl: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N", + "SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT", + "DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N", + "DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N", + /* GPORT1 */ + "SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N", + "SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT", + "LED_ID_TPM", "PLUG_DETECT_TPM", + "PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N", + /* GPORT2 */ + "LED_ID_BAT", "LED_ID_MGMT_PORT2", + "LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N", + /* GPORT3 */ + "SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N", + "LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2", + "LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2", + "RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2", + /* GPORT4 */ + "PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1", + "M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N", + "SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N", + "LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P", + /* GPORT5 */ + "LED_ID_M2_SSD2", "LED_ID_M2_SSD1", + "PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N"; + + pinctrl-0 = <&U62120_input &U62120_input_pullup>; + pinctrl-names = "default"; + U62120_input: input-pins { + pins = "gp10"; + function = "gpio"; + input-enable; + bias-disable; + }; + U62120_input_pullup: input-pullup-pins { + pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13", + "gp23", "gp30", "gp40", "gp42", "gp44", "gp53"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + bmc_pex_irq: pinctrl@20 { + compatible = "cypress,cy8c9520"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N", + "SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N", + "SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N", + "SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N", + /* GPORT1 */ + "SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N", + "SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N", + "SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT", + "SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N", + /* GPORT2 */ + "SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST", + "PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST"; + pinctrl-0 = <&U60000_pins>; + pinctrl-names = "default"; + U60000_pins: cfg-pins { + pins = "gp06", "gp10", "gp15"; + function = "gpio"; + input-enable; + bias-disable; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + i2cmux24: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&p3v3_bmc_aux>; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + vcc-supply = <&p3v3_bmc_aux>; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + i2cmux25: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2cmux25 { + reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_bmc_aux>; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + p5v_aux: ir38263-p5v-aux@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p5v_aux"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + vbus-supply = <&p3v3_bmc_aux>; + regulator-always-on; + regulator-boot-on; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + p3v3_aux: ir38263-p3v3-aux@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + vin-supply = <&p12v>; + regulator-name = "p3v3_aux"; + /* + * 2msec for regulator + 18msec for board capacitance + * Note: Every IC has a PTC which slowly charges the bypass + * cap. + */ + regulator-enable-ramp-delay = <200000>; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + aux_ssb: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + vss1-supply = <&p5v_aux>; + vss2-supply = <&p3v3_aux>; + regulators { + p5v: sw0 { + regulator-name = "p5v"; + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <100000>; + }; + p3v3_pch: sw1 { + regulator-name = "p3v3_pch"; + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <100000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_a: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_a: vout2 { + regulator-name = "bcm0"; + regulator-boot-on; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_b: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_b: vout2 { + regulator-name = "bcm1"; + regulator-boot-on; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_c: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_c: vout2 { + regulator-name = "bcm2"; + regulator-boot-on; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_d: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_d: vout2 { + regulator-name = "bcm3"; + regulator-boot-on; + }; + }; + }; + }; +}; + +&i2cmux24 { + + reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + smb_svc_pex_rssd01_16: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "LED_ID_RSSD01", "LED_ID_RSSD02", + "LED_ID_RSSD03", "LED_ID_RSSD04", + "LED_ID_RSSD05", "LED_ID_RSSD06", + "LED_ID_RSSD07", "LED_ID_RSSD08", + /* GPORT1 */ + "LED_ID_RSSD09", "LED_ID_RSSD10", + "LED_ID_RSSD11", "LED_ID_RSSD12", + "LED_ID_RSSD13", "LED_ID_RSSD14", + "LED_ID_RSSD15", "LED_ID_RSSD16", + /* GPORT2 */ + "RSSD01_PRESENT_N", "RSSD02_PRESENT_N", + "RSSD03_PRESENT_N", "RSSD04_PRESENT_N", + /* GPORT3 */ + "RSSD05_PRESENT_N", "RSSD06_PRESENT_N", + "RSSD07_PRESENT_N", "RSSD08_PRESENT_N", + "RSSD09_PRESENT_N", "RSSD10_PRESENT_N", + "RSSD11_PRESENT_N", "RSSD12_PRESENT_N", + /* GPORT4 */ + "RSSD13_PRESENT_N", "RSSD14_PRESENT_N", + "RSSD15_PRESENT_N", "RSSD16_PRESENT_N", + "LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02", + "LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04", + /* GPORT5 */ + "LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06", + "PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02", + "PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04", + "PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06", + /* GPORT6 */ + "SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N", + "SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N", + "SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N", + "SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N", + /* GPORT7 */ + "SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N", + "SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N", + "SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N", + "SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N"; + pinctrl-0 = <&U65200_pins>; + pinctrl-names = "default"; + U65200_pins: cfg-pins { + pins = "gp60", "gp61", "gp62", + "gp63", "gp64", "gp65", "gp66", + "gp67", "gp70", "gp71", "gp72", + "gp73", "gp74", "gp75", "gp76", "gp77"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_rssd17_32: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "LED_ID_RSSD17", "LED_ID_RSSD18", + "LED_ID_RSSD19", "LED_ID_RSSD20", + "LED_ID_RSSD21", "LED_ID_RSSD22", + "LED_ID_RSSD23", "LED_ID_RSSD24", + /* GPORT1 */ + "LED_ID_RSSD25", "LED_ID_RSSD26", + "LED_ID_RSSD27", "LED_ID_RSSD28", + "LED_ID_RSSD29", "LED_ID_RSSD30", + "LED_ID_RSSD31", "LED_ID_RSSD32", + /* GPORT2 */ + "RSSD17_PRESENT_N", "RSSD18_PRESENT_N", + "RSSD19_PRESENT_N", "RSSD20_PRESENT_N", + /* GPORT3 */ + "RSSD21_PRESENT_N", "RSSD22_PRESENT_N", + "RSSD23_PRESENT_N", "RSSD24_PRESENT_N", + "RSSD25_PRESENT_N", "RSSD26_PRESENT_N", + "RSSD27_PRESENT_N", "RSSD28_PRESENT_N", + /* GPORT4 */ + "RSSD29_PRESENT_N", "RSSD30_PRESENT_N", + "RSSD31_PRESENT_N", "RSSD32_PRESENT_N", + "LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08", + "LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10", + /* GPORT5 */ + "LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12", + "PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08", + "PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10", + "PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12", + /* GPORT6 */ + "SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N", + "SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N", + "SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N", + "SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N", + /* GPORT7 */ + "SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N", + "SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N", + "SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N", + "SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N"; + pinctrl-0 = <&U65300_pins>; + pinctrl-names = "default"; + U65300_pins: cfg-pins { + pins = "gp60", "gp61", "gp62", + "gp63", "gp64", "gp65", "gp66", + "gp67", "gp70", "gp71", "gp72", + "gp73", "gp74", "gp75", "gp76", + "gp77"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_cpu1_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <18 2>, <36 2>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1", + "PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1", + "PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1", + "PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2", + "PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2", + "PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2", + "PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2", + /* GPORT2 */ + "PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1", + "LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1", + "LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1", + "LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1", + /* GPORT4 */ + "LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1", + "LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1", + "LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1", + "LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1", + /* GPORT5 */ + "", "", + "FM_CPU1_SKTOCC_N", "LED_ID_CPU1"; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_fan_alert: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&bmc_pex_irq>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_aux>; + reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <24 3>, <51 9>; + gpio-line-names = + /* GPORT0 */ + "FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N", + "FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N", + "FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N", + "FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N", + /* GPORT1 */ + "FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N", + "FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N", + "FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N", + "FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N", + /* GPORT2 */ + "FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N", + "FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N", + /* GPORT3 */ + "FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N", + "FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N", + "", "", + "", "FAN01_PWM_ALERT_N", + /* GPORT4 */ + "FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N", + "FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N", + "FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N", + "FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N", + /* GPORT5 */ + "FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N", + "FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N", + "FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N", + "FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N", + /* GPORT6 */ + "FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N", + "FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N", + "FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N", + "FAN24_PWM_ALERT_N", "", + /* GPORT7 */ + "", "", + "", "", + "", "", + "", ""; + pinctrl-0 = <&U65600_pins>; + pinctrl-names = "default"; + U65600_pins: cfg-pins { + pins = "gp00", "gp01", "gp02", + "gp03", "gp04", "gp05", "gp06", + "gp07", "gp10", "gp11", "gp12", + "gp13", "gp14", "gp15", "gp16", + "gp17", "gp20", "gp21", "gp22", + "gp23", "gp30", "gp31", "gp32", + "gp33", "gp37", "gp40", "gp41", + "gp42", "gp43", "gp44", "gp45", + "gp46", "gp47", "gp50", "gp51", + "gp52", "gp53", "gp54", "gp55", + "gp56", "gp57", "gp60", "gp61", + "gp62", "gp63", "gp64", "gp65", + "gp66"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_cpu2_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <17 3>, <36 2>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1", + "PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1", + "PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1", + "PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2", + "PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2", + "PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2", + "PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2", + /* GPORT2 */ + "PEX_CPU2_EVENT_RST", "", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1", + "LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1", + "LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1", + "LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1", + /* GPORT4 */ + "LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1", + "LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1", + "LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1", + "LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1", + /* GPORT5 */ + "", "", + "FM_CPU2_SKTOCC_N", "LED_ID_CPU2"; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_svc_pex_cpu3_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <17 3>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1", + "PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1", + "PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1", + "PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2", + "PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2", + "PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2", + "PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2", + /* GPORT2 */ + "PEX_CPU3_EVENT_RST", "", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1", + "LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1", + "LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1", + "LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1", + /* GPORT4 */ + "LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1", + "LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1", + "LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1", + "LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1", + /* GPORT5 */ + "LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P", + "FM_CPU3_SKTOCC_N", "LED_ID_CPU3"; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_cpu0_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <18 2>, <36 2>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1", + "PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1", + "PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1", + "PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2", + "PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2", + "PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2", + "PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2", + /* GPORT2 */ + "PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1", + "LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1", + "LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1", + "LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1", + /* GPORT4 */ + "LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1", + "LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1", + "LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1", + "LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1", + /* GPORT5 */ + "", "", + "FM_CPU0_SKTOCC_N", "LED_ID_CPU0"; + }; + }; +}; + +&i2c9 { + status = "okay"; + + p1v2_bmc_aux_mon: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + max8952,default-mode = <3>; + max8952,dvs-mode-microvolt = <1100000>, <1100000>, + <1100000>, <1100000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2cmux8 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan10_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan10_ssb: sw0 { + regulator-name = "fan10_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + fan12_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan12_ssb: sw0 { + regulator-name = "fan12_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fan14_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan14_ssb: sw0 { + regulator-name = "fan14_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fan16_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan16_ssb: sw0 { + regulator-name = "fan16_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + fan18_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan18_ssb: sw0 { + regulator-name = "fan18_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fan20_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan20_ssb: sw0 { + regulator-name = "fan20_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fan22_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan22_ssb: sw0 { + regulator-name = "fan22_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fan24_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan24_ssb: sw0 { + regulator-name = "fan24_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux7 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan17_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan17_ssb: sw0 { + regulator-name = "fan17_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + fan19_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan19_ssb: sw0 { + regulator-name = "fan19_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fan21_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan21_ssb: sw0 { + regulator-name = "fan21_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fan23_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan23_ssb: sw0 { + regulator-name = "fan23_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + fan02_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan02_ssb: sw0 { + regulator-name = "fan02_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fan04_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan04_ssb: sw0 { + regulator-name = "fan04_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fan06_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan06_ssb: sw0 { + regulator-name = "fan06_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fan08_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan08_ssb: sw0 { + regulator-name = "fan08_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux6 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan01_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan01_ssb: sw0 { + regulator-name = "fan01_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + fan03_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan03_ssb: sw0 { + regulator-name = "fan03_supply"; + + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fan05_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan05_ssb: sw0 { + regulator-name = "fan05_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fan07_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan07_ssb: sw0 { + regulator-name = "fan07_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + fan09_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan09_ssb: sw0 { + regulator-name = "fan09_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fan11_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan11_ssb: sw0 { + regulator-name = "fan11_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fan13_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan13_ssb: sw0 { + regulator-name = "fan13_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fan15_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan15_ssb: sw0 { + regulator-name = "fan15_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + + }; +}; + +&i2cmux9 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd19: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <46 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd19:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd19: sw0 { + regulator-name = "rssd19_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd19: sw1 { + regulator-name = "rssd19_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd18: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd18:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd18: sw0 { + regulator-name = "rssd18_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd18: sw1 { + regulator-name = "rssd18_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd17: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <44 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd17:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd17: sw0 { + regulator-name = "rssd17_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd17: sw1 { + regulator-name = "rssd17_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd20: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <47 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd20:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd20: sw0 { + regulator-name = "rssd20_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd20: sw1 { + regulator-name = "rssd20_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd21: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <48 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd21:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd21: sw0 { + regulator-name = "rssd21_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd21: sw1 { + regulator-name = "rssd21_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd22: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <49 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd22:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd22: sw0 { + regulator-name = "rssd22_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd22: sw1 { + regulator-name = "rssd22_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd24: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd24:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd24: sw0 { + regulator-name = "rssd24_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd24: sw1 { + regulator-name = "rssd24_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd23: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd23:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd23: sw0 { + regulator-name = "rssd23_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd23: sw1 { + regulator-name = "rssd23_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux10 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd25: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <52 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd25:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd25: sw0 { + regulator-name = "rssd25_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd25: sw1 { + regulator-name = "rssd25_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd26: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <53 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd26:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd26: sw0 { + regulator-name = "rssd26_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd26: sw1 { + regulator-name = "rssd26_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd27: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <54 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd27:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd27: sw0 { + regulator-name = "rssd27_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd27: sw1 { + regulator-name = "rssd27_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd32: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <59 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd32:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd32: sw0 { + regulator-name = "rssd32_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd32: sw1 { + regulator-name = "rssd32_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd31: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <58 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd31:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd31: sw0 { + regulator-name = "rssd31_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd31: sw1 { + regulator-name = "rssd31_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd30: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <57 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd30:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd30: sw0 { + regulator-name = "rssd30_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd30: sw1 { + regulator-name = "rssd30_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd29: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd29:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd29: sw0 { + regulator-name = "rssd29_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd29: sw1 { + regulator-name = "rssd29_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd28: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd28:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd28: sw0 { + regulator-name = "rssd28_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd28: sw1 { + regulator-name = "rssd28_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux18 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd03: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <46 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd03:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd03: sw0 { + regulator-name = "rssd03_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd03: sw1 { + regulator-name = "rssd03_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd02: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd02:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd02: sw0 { + regulator-name = "rssd02_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd02: sw1 { + regulator-name = "rssd02_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd01: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <44 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd01:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd01: sw0 { + regulator-name = "rssd01_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd01: sw1 { + regulator-name = "rssd01_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd04: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <47 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd04:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd04: sw0 { + regulator-name = "rssd04_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd04: sw1 { + regulator-name = "rssd04_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd05: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <48 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd05:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd05: sw0 { + regulator-name = "rssd05_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd05: sw1 { + regulator-name = "rssd05_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd08: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd08:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd08: sw0 { + regulator-name = "rssd08_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd08: sw1 { + regulator-name = "rssd08_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd07: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd07:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd07: sw0 { + regulator-name = "rssd07_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd07: sw1 { + regulator-name = "rssd07_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd06: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <49 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd06:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd06: sw0 { + regulator-name = "rssd06_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd06: sw1 { + regulator-name = "rssd06_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux19 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd14: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <57 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd14:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd14: sw0 { + regulator-name = "rssd14_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd14: sw1 { + regulator-name = "rssd14_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd13: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd13:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd13: sw0 { + regulator-name = "rssd13_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd13: sw1 { + regulator-name = "rssd13_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd12: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd12:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd12: sw0 { + regulator-name = "rssd12_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd12: sw1 { + regulator-name = "rssd12_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd11: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <54 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd11:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd11: sw0 { + regulator-name = "rssd11_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd11: sw1 { + regulator-name = "rssd11_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd10: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <53 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd10:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd10: sw0 { + regulator-name = "rssd10_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd10: sw1 { + regulator-name = "rssd10_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd09: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <52 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd09:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd09: sw0 { + regulator-name = "rssd09_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd09: sw1 { + regulator-name = "rssd09_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd15: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <58 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd15:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd15: sw0 { + regulator-name = "rssd15_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd15: sw1 { + regulator-name = "rssd15_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd16: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <59 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd16:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd16: sw0 { + regulator-name = "rssd16_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd16: sw1 { + regulator-name = "rssd16_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts new file mode 100644 index 000000000000..360b9ce3c850 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts @@ -0,0 +1,1640 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2023 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "System1"; + compatible = "ibm,system1-bmc", "aspeed,ast2600"; + + aliases { + i2c16 = &i2c8mux1chn0; + i2c17 = &i2c8mux1chn1; + i2c18 = &i2c8mux1chn2; + i2c19 = &i2c8mux1chn3; + i2c20 = &i2c8mux1chn4; + i2c21 = &i2c8mux1chn5; + i2c22 = &i2c8mux1chn6; + i2c23 = &i2c8mux1chn7; + i2c24 = &i2c3mux0chn0; + i2c25 = &i2c3mux0chn1; + i2c26 = &i2c3mux0chn2; + i2c27 = &i2c3mux0chn3; + i2c28 = &i2c3mux0chn4; + i2c29 = &i2c3mux0chn5; + i2c30 = &i2c3mux0chn6; + i2c31 = &i2c3mux0chn7; + i2c32 = &i2c6mux0chn0; + i2c33 = &i2c6mux0chn1; + i2c34 = &i2c6mux0chn2; + i2c35 = &i2c6mux0chn3; + i2c36 = &i2c6mux0chn4; + i2c37 = &i2c6mux0chn5; + i2c38 = &i2c6mux0chn6; + i2c39 = &i2c6mux0chn7; + i2c40 = &i2c7mux0chn0; + i2c41 = &i2c7mux0chn1; + i2c42 = &i2c7mux0chn2; + i2c43 = &i2c7mux0chn3; + i2c44 = &i2c7mux0chn4; + i2c45 = &i2c7mux0chn5; + i2c46 = &i2c7mux0chn6; + i2c47 = &i2c7mux0chn7; + i2c48 = &i2c8mux0chn0; + i2c49 = &i2c8mux0chn1; + i2c50 = &i2c8mux0chn2; + i2c51 = &i2c8mux0chn3; + i2c52 = &i2c8mux0chn4; + i2c53 = &i2c8mux0chn5; + i2c54 = &i2c8mux0chn6; + i2c55 = &i2c8mux0chn7; + i2c56 = &i2c14mux0chn0; + i2c57 = &i2c14mux0chn1; + i2c58 = &i2c14mux0chn2; + i2c59 = &i2c14mux0chn3; + i2c60 = &i2c14mux0chn4; + i2c61 = &i2c14mux0chn5; + i2c62 = &i2c14mux0chn6; + i2c63 = &i2c14mux0chn7; + i2c64 = &i2c15mux0chn0; + i2c65 = &i2c15mux0chn1; + i2c66 = &i2c15mux0chn2; + i2c67 = &i2c15mux0chn3; + i2c68 = &i2c15mux0chn4; + i2c69 = &i2c15mux0chn5; + i2c70 = &i2c15mux0chn6; + i2c71 = &i2c15mux0chn7; + }; + + chosen { + stdout-path = "uart5:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + eventlog: tcg-event-log@b3d00000 { + no-map; + reg = <0xb3d00000 0x100000>; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + no-map; + reg = <0xb4000000 0x04000000>; /* 64M */ + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>; + }; + + led-1 { + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; + }; + + led-3 { + gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + }; + + led-4 { + gpios = <&pca3 5 GPIO_ACTIVE_LOW>; + }; + + led-5 { + gpios = <&pca3 6 GPIO_ACTIVE_LOW>; + }; + + led-6 { + gpios = <&pca3 7 GPIO_ACTIVE_LOW>; + }; + + led-7 { + gpios = <&pca3 8 GPIO_ACTIVE_LOW>; + }; + + led-8 { + gpios = <&pca3 9 GPIO_ACTIVE_LOW>; + }; + + led-9 { + gpios = <&pca3 10 GPIO_ACTIVE_LOW>; + }; + + led-a { + gpios = <&pca3 11 GPIO_ACTIVE_LOW>; + }; + + led-b { + gpios = <&pca4 4 GPIO_ACTIVE_HIGH>; + }; + + led-c { + gpios = <&pca4 5 GPIO_ACTIVE_HIGH>; + }; + + led-d { + gpios = <&pca4 6 GPIO_ACTIVE_HIGH>; + }; + + led-e { + gpios = <&pca4 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-nvme0-presence { + label = "nvme0-presence"; + gpios = <&pca4 0 GPIO_ACTIVE_LOW>; + linux,code = <0>; + }; + + event-nvme1-presence { + label = "nvme1-presence"; + gpios = <&pca4 1 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + event-nvme2-presence { + label = "nvme2-presence"; + gpios = <&pca4 2 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + event-nvme3-presence { + label = "nvme3-presence"; + gpios = <&pca4 3 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, + <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>, + <&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, + <&adc1 4>, <&adc0 2>, <&adc1 0>, + <&p2v5_aux_vd 0>, <&adc1 7>; + }; + + p12v_vd: voltage-divider1 { + compatible = "voltage-divider"; + io-channels = <&adc1 3>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1127/127 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <15>; + full-ohms = <133>; + }; + + p5v_aux_vd: voltage-divider2 { + compatible = "voltage-divider"; + io-channels = <&adc1 5>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1365/365 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <50>; + full-ohms = <187>; + }; + + p5v_bmc_aux_vd: voltage-divider3 { + compatible = "voltage-divider"; + io-channels = <&adc0 3>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1365/365 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <50>; + full-ohms = <187>; + }; + + p3v3_aux_vd: voltage-divider4 { + compatible = "voltage-divider"; + io-channels = <&adc1 2>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1698/698 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <14>; + full-ohms = <34>; + }; + + p3v3_bmc_aux_vd: voltage-divider5 { + compatible = "voltage-divider"; + io-channels = <&adc0 7>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1698/698 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <14>; + full-ohms = <34>; + }; + + p1v8_bmc_aux_vd: voltage-divider6 { + compatible = "voltage-divider"; + io-channels = <&adc0 6>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 4000/3000 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <3>; + full-ohms = <4>; + }; + + p2v5_aux_vd: voltage-divider7 { + compatible = "voltage-divider"; + io-channels = <&adc1 1>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 2100/1100 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <11>; + full-ohms = <21>; + }; + + p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&adc0 { + status = "okay"; + vref-supply = <&p1v8_bmc_aux>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default>; +}; + +&adc1 { + status = "okay"; + vref-supply = <&p1v8_bmc_aux>; + aspeed,battery-sensing; + + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","bmc-tpm-reset","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","bmc-ready", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "fpga-debug-enable","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","bmc-hb", + /*Q0-Q7*/ "","","","","","","pch-ready","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "fpga-pgood","power-chassis-good","pch-pgood","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; + bus-frequency = <1000000>; +}; + +&ibt { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + +&peci0 { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>, <0x81>; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + regulator@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "VR_v77_1v4"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c1 { + status = "okay"; + + regulator@42 { + compatible = "infineon,ir38263"; + reg = <0x42>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nic1-perst"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "bmc-perst"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "reset-M2-SSD1-2-perst"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "pcie-perst1"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "pcie-perst2"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "pcie-perst3"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "pcie-perst4"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "pcie-perst5"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "pcie-perst6"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "pcie-perst7"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "pcie-perst8"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "PV-cp0-sw1stk4-perst"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "PV-cp0-sw1stk5-perst"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "pe-cp-drv0-perst"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "pe-cp-drv1-perst"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "lom-perst"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "PLUG_DETECT_PCIE_J101_N", + "PLUG_DETECT_PCIE_J102_N", + "PLUG_DETECT_PCIE_J103_N", + "PLUG_DETECT_PCIE_J104_N", + "PLUG_DETECT_PCIE_J105_N", + "PLUG_DETECT_PCIE_J106_N", + "PLUG_DETECT_PCIE_J107_N", + "PLUG_DETECT_PCIE_J108_N", + "PLUG_DETECT_M2_SSD1_N", + "PLUG_DETECT_NIC1_N", + "SEL_SMB_DIMM_CPU0", + "presence-ps2", + "presence-ps3", + "", "", + "PWRBRD_PLUG_DETECT2_N"; + }; +}; + +&i2c2 { + status = "okay"; + + power-supply@58 { + compatible = "intel,crps185"; + reg = <0x58>; + }; + + power-supply@59 { + compatible = "intel,crps185"; + reg = <0x59>; + }; + + power-supply@5a { + compatible = "intel,crps185"; + reg = <0x5a>; + }; + + power-supply@5b { + compatible = "intel,crps185"; + reg = <0x5b>; + }; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c3mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c3mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c3mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c3mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c3mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c3mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c3mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c3mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + + regulator@42 { + compatible = "infineon,ir38263"; + reg = <0x42>; + }; + + regulator@43 { + compatible = "infineon,ir38060"; + reg = <0x43>; + }; +}; + +&i2c6 { + status = "okay"; + + fan-controller@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + }; + + fan-controller@54 { + compatible = "maxim,max31785a"; + reg = <0x54>; + }; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c6mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c6mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c6mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c6mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + humidity-sensor@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "enclosure-id-led"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "attention-led"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "enclosure-fault-rollup-led"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "power-on-led"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + temperature-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + }; + }; + + i2c6mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c6mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c6mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + pca3: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + + gpio-controller; + #gpio-cells = <2>; + }; + + pca4: gpio@77 { + compatible = "nxp,pca9539"; + reg = <0x77>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "PE_NVMED0_EXP_PRSNT_N", + "PE_NVMED1_EXP_PRSNT_N", + "PE_NVMED2_EXP_PRSNT_N", + "PE_NVMED3_EXP_PRSNT_N", + "LED_FAULT_NVMED0", + "LED_FAULT_NVMED1", + "LED_FAULT_NVMED2", + "LED_FAULT_NVMED3", + "FAN0_PRESENCE_R_N", + "FAN1_PRESENCE_R_N", + "FAN2_PRESENCE_R_N", + "FAN3_PRESENCE_R_N", + "FAN4_PRESENCE_R_N", + "FAN5_PRESENCE_N", + "FAN6_PRESENCE_N", + ""; + }; +}; + +&i2c7 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c7mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c7mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c7mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c7mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + regulator@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + }; + }; + + i2c7mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c7mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + }; + + i2c7mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c7mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c8 { + status = "okay"; + bus-frequency = <400000>; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c8mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + }; + + i2c8mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + + regulator@41 { + compatible = "infineon,tda38640"; + reg = <0x41>; + }; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + + regulator@5b { + compatible = "mps,mp2971"; + reg = <0x5b>; + }; + }; + + i2c8mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c8mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c8mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c8mux1chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c8mux1chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c8mux1chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c8mux1chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c8mux1chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c8mux1chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c8mux1chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c8mux1chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + }; + + i2c8mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c8mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + temperature-sensor@4c { + compatible = "ti,tmp432"; + reg = <0x4c>; + }; + }; + + i2c8mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + regulator@40 { + compatible = "infineon,ir38060"; + reg = <0x40>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; + + regulator@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + }; + + regulator@41 { + compatible = "infineon,ir38263"; + reg = <0x41>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + regulator@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "VR_v77_1v4"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c11 { + status = "okay"; + + tpm@2e { + compatible = "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&eventlog>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; + + regulator@41 { + compatible = "infineon,ir38263"; + reg = <0x41>; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "efuse-12v-slots"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "efuse-3p3v-slot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "nic2-pert"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "pcie-perst9"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "pcie-perst10"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "pcie-perst11"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "pcie-perst12"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "pcie-perst13"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "pcie-perst14"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "pcie-perst15"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "pcie-perst16"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "PV-cp1-sw1stk4-perst"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "PV-cp1-sw1stk5-perst"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "pe-cp-drv2-perst"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "pe-cp-drv3-perst"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + gpio@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "PLUG_DETECT_PCIE_J109_N", + "PLUG_DETECT_PCIE_J110_N", + "PLUG_DETECT_PCIE_J111_N", + "PLUG_DETECT_PCIE_J112_N", + "PLUG_DETECT_PCIE_J113_N", + "PLUG_DETECT_PCIE_J114_N", + "PLUG_DETECT_PCIE_J115_N", + "PLUG_DETECT_PCIE_J116_N", + "PLUG_DETECT_M2_SSD2_N", + "PLUG_DETECT_NIC2_N", + "SEL_SMB_DIMM_CPU1", + "presence-ps0", + "presence-ps1", + "", "", + "PWRBRD_PLUG_DETECT1_N"; + }; + + gpio@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SW1_BOOTRCVRYB1_N", + "SW1_BOOTRCVRYB0_N", + "SW2_BOOTRCVRYB1_N", + "SW2_BOOTRCVRYB0_N", + "SW3_4_BOOTRCVRYB1_N", + "SW3_4_BOOTRCVRYB0_N", + "SW5_BOOTRCVRYB1_N", + "SW5_BOOTRCVRYB0_N", + "SW6_BOOTRCVRYB1_N", + "SW6_BOOTRCVRYB0_N", + "SW1_RESET_N", + "SW3_RESET_N", + "SW4_RESET_N", + "SW2_RESET_N", + "SW5_RESET_N", + "SW6_RESET_N"; + }; +}; + +&i2c14 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c14mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c14mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c14mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c14mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + regulator@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + }; + }; + + i2c14mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c14mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + }; + + i2c14mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c14mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c15 { + status = "okay"; + bus-frequency = <400000>; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + }; + + i2c15mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + + regulator@41 { + compatible = "infineon,tda38640"; + reg = <0x41>; + }; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + + regulator@5b { + compatible = "mps,mp2971"; + reg = <0x5b>; + }; + }; + + i2c15mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c15mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c15mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux1chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c15mux1chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c15mux1chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c15mux1chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c15mux1chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c15mux1chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c15mux1chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c15mux1chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + }; + + i2c15mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c15mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + temperature-sensor@4c { + compatible = "ti,tmp432"; + reg = <0x4c>; + }; + }; + + i2c15mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + regulator@40 { + compatible = "infineon,ir38060"; + reg = <0x40>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp432"; + reg = <0x4c>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts index 0dea014e4f30..78a5656ef75d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts @@ -814,10 +814,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts index 5a98a19f445e..7a78c34cff40 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts @@ -123,10 +123,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts index d5b7d28cda88..da55e7b29fac 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts @@ -118,10 +118,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts index c0847636f20b..370738572a55 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts @@ -263,10 +263,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &gpio { pin_gpio_b0 { gpio-hog; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts index ac0d666ca10e..b1d0ff85d397 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts @@ -284,10 +284,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &ibt { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts index 893e621ecab1..24df24ad9c80 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts @@ -289,10 +289,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts index bbf864f84d37..a0e8c97e944a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts @@ -938,10 +938,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts index 213023bc5aec..b31eb8e58c6b 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts @@ -870,11 +870,6 @@ <&pinctrl_lsirq_default>; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts index a20a532fc280..8b1e82c8cdfe 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts @@ -661,10 +661,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; @@ -696,9 +692,4 @@ memory-region = <&video_engine_memory>; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - #include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts index 3d2d8db73ca6..9904f0a58cfa 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts @@ -466,8 +466,6 @@ }; &pinctrl { - aspeed,external-nodes = <&gfx &lhc>; - pinctrl_gpioh_unbiased: gpioi_unbiased { pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7"; bias-disable; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts index 983853eedaef..fd361cf073c2 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts @@ -381,7 +381,7 @@ #size-cells = <0>; reg = <5>; - U190_fru@51 { + eeprom@51 { compatible = "atmel,24c128"; reg = <0x51>; pagesize = <32>; @@ -460,7 +460,7 @@ status = "okay"; /* MB FRU (U173) @ 0xA2 */ - mb_fru: mb_fru@51 { + mb_fru: eeprom@51 { compatible = "atmel,24c128"; reg = <0x51>; pagesize = <32>; @@ -472,7 +472,7 @@ reg = <0x4a>; }; - FP_U4_fru@52 { + eeprom@52 { compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; @@ -593,7 +593,7 @@ status = "okay"; /* SCM FRU (U19) @ 0xA2 */ - scm_fru: scm_fru@51 { + scm_fru: eeprom@51 { compatible = "atmel,24c128"; reg = <0x51>; pagesize = <32>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts index 50f3c6a5c0c8..b961dff388d1 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts @@ -123,10 +123,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts index b8f0b08018a3..98f3e0437704 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts @@ -154,7 +154,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <7>; - at24@50 { + eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; pagesize = <32>; @@ -196,7 +196,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <7>; - at24@50 { + eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; pagesize = <32>; @@ -205,7 +205,7 @@ }; }; }; - at24@50 { + eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; pagesize = <32>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi index 1a5b25b2ea29..16815eede710 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi @@ -291,7 +291,7 @@ /* SMB_BMC_MGMT_LVC3 */ status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; pagesize = <32>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index 857cb26ed6d7..78c967812492 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -122,8 +122,8 @@ reg = <0x1e6c0080 0x80>; }; - cvic: copro-interrupt-controller@1e6c2000 { - compatible = "aspeed,ast2400-cvic", "aspeed-cvic"; + cvic: interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2400-cvic", "aspeed,cvic"; valid-sources = <0x7fffffff>; reg = <0x1e6c2000 0x80>; }; @@ -230,6 +230,9 @@ sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x8000>; // 32K + ranges; + #address-cells = <1>; + #size-cells = <1>; }; video: video@1e700000 { @@ -463,7 +466,7 @@ interrupt-controller; }; - i2c0: i2c-bus@40 { + i2c0: i2c@40 { #address-cells = <1>; #size-cells = <0>; @@ -478,7 +481,7 @@ /* Does not need pinctrl properties */ }; - i2c1: i2c-bus@80 { + i2c1: i2c@80 { #address-cells = <1>; #size-cells = <0>; @@ -493,7 +496,7 @@ /* Does not need pinctrl properties */ }; - i2c2: i2c-bus@c0 { + i2c2: i2c@c0 { #address-cells = <1>; #size-cells = <0>; @@ -509,7 +512,7 @@ status = "disabled"; }; - i2c3: i2c-bus@100 { + i2c3: i2c@100 { #address-cells = <1>; #size-cells = <0>; @@ -525,7 +528,7 @@ status = "disabled"; }; - i2c4: i2c-bus@140 { + i2c4: i2c@140 { #address-cells = <1>; #size-cells = <0>; @@ -541,7 +544,7 @@ status = "disabled"; }; - i2c5: i2c-bus@180 { + i2c5: i2c@180 { #address-cells = <1>; #size-cells = <0>; @@ -557,7 +560,7 @@ status = "disabled"; }; - i2c6: i2c-bus@1c0 { + i2c6: i2c@1c0 { #address-cells = <1>; #size-cells = <0>; @@ -573,7 +576,7 @@ status = "disabled"; }; - i2c7: i2c-bus@300 { + i2c7: i2c@300 { #address-cells = <1>; #size-cells = <0>; @@ -589,7 +592,7 @@ status = "disabled"; }; - i2c8: i2c-bus@340 { + i2c8: i2c@340 { #address-cells = <1>; #size-cells = <0>; @@ -605,7 +608,7 @@ status = "disabled"; }; - i2c9: i2c-bus@380 { + i2c9: i2c@380 { #address-cells = <1>; #size-cells = <0>; @@ -621,7 +624,7 @@ status = "disabled"; }; - i2c10: i2c-bus@3c0 { + i2c10: i2c@3c0 { #address-cells = <1>; #size-cells = <0>; @@ -637,7 +640,7 @@ status = "disabled"; }; - i2c11: i2c-bus@400 { + i2c11: i2c@400 { #address-cells = <1>; #size-cells = <0>; @@ -653,7 +656,7 @@ status = "disabled"; }; - i2c12: i2c-bus@440 { + i2c12: i2c@440 { #address-cells = <1>; #size-cells = <0>; @@ -669,7 +672,7 @@ status = "disabled"; }; - i2c13: i2c-bus@480 { + i2c13: i2c@480 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index e6f3cf3c721e..57a699a7c149 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -139,8 +139,8 @@ reg = <0x1e6c0080 0x80>; }; - cvic: copro-interrupt-controller@1e6c2000 { - compatible = "aspeed,ast2500-cvic", "aspeed-cvic"; + cvic: interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2500-cvic", "aspeed,cvic"; valid-sources = <0xffffffff>; copro-sw-interrupts = <1>; reg = <0x1e6c2000 0x80>; @@ -281,17 +281,6 @@ interrupts = <0x19>; }; - xdma: xdma@1e6e7000 { - compatible = "aspeed,ast2500-xdma"; - reg = <0x1e6e7000 0x100>; - clocks = <&syscon ASPEED_CLK_GATE_BCLK>; - resets = <&syscon ASPEED_RESET_XDMA>; - interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>; - aspeed,pcie-device = "bmc"; - aspeed,scu = <&syscon>; - status = "disabled"; - }; - adc: adc@1e6e9000 { compatible = "aspeed,ast2500-adc"; reg = <0x1e6e9000 0xb0>; @@ -314,6 +303,9 @@ sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K + ranges; + #address-cells = <1>; + #size-cells = <1>; }; sdmmc: sd-controller@1e740000 { @@ -592,7 +584,7 @@ interrupt-controller; }; - i2c0: i2c-bus@40 { + i2c0: i2c@40 { #address-cells = <1>; #size-cells = <0>; @@ -607,7 +599,7 @@ /* Does not need pinctrl properties */ }; - i2c1: i2c-bus@80 { + i2c1: i2c@80 { #address-cells = <1>; #size-cells = <0>; @@ -622,7 +614,7 @@ /* Does not need pinctrl properties */ }; - i2c2: i2c-bus@c0 { + i2c2: i2c@c0 { #address-cells = <1>; #size-cells = <0>; @@ -638,7 +630,7 @@ status = "disabled"; }; - i2c3: i2c-bus@100 { + i2c3: i2c@100 { #address-cells = <1>; #size-cells = <0>; @@ -654,7 +646,7 @@ status = "disabled"; }; - i2c4: i2c-bus@140 { + i2c4: i2c@140 { #address-cells = <1>; #size-cells = <0>; @@ -670,7 +662,7 @@ status = "disabled"; }; - i2c5: i2c-bus@180 { + i2c5: i2c@180 { #address-cells = <1>; #size-cells = <0>; @@ -686,7 +678,7 @@ status = "disabled"; }; - i2c6: i2c-bus@1c0 { + i2c6: i2c@1c0 { #address-cells = <1>; #size-cells = <0>; @@ -702,7 +694,7 @@ status = "disabled"; }; - i2c7: i2c-bus@300 { + i2c7: i2c@300 { #address-cells = <1>; #size-cells = <0>; @@ -718,7 +710,7 @@ status = "disabled"; }; - i2c8: i2c-bus@340 { + i2c8: i2c@340 { #address-cells = <1>; #size-cells = <0>; @@ -734,7 +726,7 @@ status = "disabled"; }; - i2c9: i2c-bus@380 { + i2c9: i2c@380 { #address-cells = <1>; #size-cells = <0>; @@ -750,7 +742,7 @@ status = "disabled"; }; - i2c10: i2c-bus@3c0 { + i2c10: i2c@3c0 { #address-cells = <1>; #size-cells = <0>; @@ -766,7 +758,7 @@ status = "disabled"; }; - i2c11: i2c-bus@400 { + i2c11: i2c@400 { #address-cells = <1>; #size-cells = <0>; @@ -782,7 +774,7 @@ status = "disabled"; }; - i2c12: i2c-bus@440 { + i2c12: i2c@440 { #address-cells = <1>; #size-cells = <0>; @@ -798,7 +790,7 @@ status = "disabled"; }; - i2c13: i2c-bus@480 { + i2c13: i2c@480 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index 29f94696d8b1..8ed715bd53aa 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -231,41 +231,33 @@ resets = <&syscon ASPEED_RESET_MII>; }; - mac0: ftgmac@1e660000 { + mac0: ethernet@1e660000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; status = "disabled"; }; - mac1: ftgmac@1e680000 { + mac1: ethernet@1e680000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e680000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; status = "disabled"; }; - mac2: ftgmac@1e670000 { + mac2: ethernet@1e670000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e670000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>; status = "disabled"; }; - mac3: ftgmac@1e690000 { + mac3: ethernet@1e690000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e690000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>; status = "disabled"; @@ -398,19 +390,6 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; }; - xdma: xdma@1e6e7000 { - compatible = "aspeed,ast2600-xdma"; - reg = <0x1e6e7000 0x100>; - clocks = <&syscon ASPEED_CLK_GATE_BCLK>; - resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>; - reset-names = "device", "root-complex"; - interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>; - aspeed,pcie-device = "bmc"; - aspeed,scu = <&syscon>; - status = "disabled"; - }; - adc0: adc@1e6e9000 { compatible = "aspeed,ast2600-adc0"; reg = <0x1e6e9000 0x100>; @@ -867,22 +846,26 @@ }; fsim0: fsi@1e79b000 { + #interrupt-cells = <1>; compatible = "aspeed,ast2600-fsi-master", "fsi-master"; reg = <0x1e79b000 0x94>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fsi1_default>; clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + interrupt-controller; status = "disabled"; }; fsim1: fsi@1e79b100 { + #interrupt-cells = <1>; compatible = "aspeed,ast2600-fsi-master", "fsi-master"; reg = <0x1e79b100 0x94>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fsi2_default>; clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + interrupt-controller; status = "disabled"; }; @@ -901,7 +884,7 @@ #include "aspeed-g6-pinctrl.dtsi" &i2c { - i2c0: i2c-bus@80 { + i2c0: i2c@80 { #address-cells = <1>; #size-cells = <0>; reg = <0x80 0x80>; @@ -915,7 +898,7 @@ status = "disabled"; }; - i2c1: i2c-bus@100 { + i2c1: i2c@100 { #address-cells = <1>; #size-cells = <0>; reg = <0x100 0x80>; @@ -929,7 +912,7 @@ status = "disabled"; }; - i2c2: i2c-bus@180 { + i2c2: i2c@180 { #address-cells = <1>; #size-cells = <0>; reg = <0x180 0x80>; @@ -943,7 +926,7 @@ status = "disabled"; }; - i2c3: i2c-bus@200 { + i2c3: i2c@200 { #address-cells = <1>; #size-cells = <0>; reg = <0x200 0x80>; @@ -957,7 +940,7 @@ status = "disabled"; }; - i2c4: i2c-bus@280 { + i2c4: i2c@280 { #address-cells = <1>; #size-cells = <0>; reg = <0x280 0x80>; @@ -971,7 +954,7 @@ status = "disabled"; }; - i2c5: i2c-bus@300 { + i2c5: i2c@300 { #address-cells = <1>; #size-cells = <0>; reg = <0x300 0x80>; @@ -985,7 +968,7 @@ status = "disabled"; }; - i2c6: i2c-bus@380 { + i2c6: i2c@380 { #address-cells = <1>; #size-cells = <0>; reg = <0x380 0x80>; @@ -999,7 +982,7 @@ status = "disabled"; }; - i2c7: i2c-bus@400 { + i2c7: i2c@400 { #address-cells = <1>; #size-cells = <0>; reg = <0x400 0x80>; @@ -1013,7 +996,7 @@ status = "disabled"; }; - i2c8: i2c-bus@480 { + i2c8: i2c@480 { #address-cells = <1>; #size-cells = <0>; reg = <0x480 0x80>; @@ -1027,7 +1010,7 @@ status = "disabled"; }; - i2c9: i2c-bus@500 { + i2c9: i2c@500 { #address-cells = <1>; #size-cells = <0>; reg = <0x500 0x80>; @@ -1041,7 +1024,7 @@ status = "disabled"; }; - i2c10: i2c-bus@580 { + i2c10: i2c@580 { #address-cells = <1>; #size-cells = <0>; reg = <0x580 0x80>; @@ -1055,7 +1038,7 @@ status = "disabled"; }; - i2c11: i2c-bus@600 { + i2c11: i2c@600 { #address-cells = <1>; #size-cells = <0>; reg = <0x600 0x80>; @@ -1069,7 +1052,7 @@ status = "disabled"; }; - i2c12: i2c-bus@680 { + i2c12: i2c@680 { #address-cells = <1>; #size-cells = <0>; reg = <0x680 0x80>; @@ -1083,7 +1066,7 @@ status = "disabled"; }; - i2c13: i2c-bus@700 { + i2c13: i2c@700 { #address-cells = <1>; #size-cells = <0>; reg = <0x700 0x80>; @@ -1097,7 +1080,7 @@ status = "disabled"; }; - i2c14: i2c-bus@780 { + i2c14: i2c@780 { #address-cells = <1>; #size-cells = <0>; reg = <0x780 0x80>; @@ -1111,7 +1094,7 @@ status = "disabled"; }; - i2c15: i2c-bus@800 { + i2c15: i2c@800 { #address-cells = <1>; #size-cells = <0>; reg = <0x800 0x80>; diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi index cc466910bb52..07ce3b2bc62a 100644 --- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi +++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi @@ -165,10 +165,12 @@ }; fsi_hub0: hub@3400 { + #interrupt-cells = <1>; compatible = "fsi-master-hub"; reg = <0x3400 0x400>; #address-cells = <2>; #size-cells = <0>; + interrupt-controller; }; }; }; diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi new file mode 100644 index 000000000000..68c941a194b6 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi @@ -0,0 +1,1539 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + i2c300 = &cfam2_i2c0; + i2c301 = &cfam2_i2c1; + i2c310 = &cfam2_i2c10; + i2c311 = &cfam2_i2c11; + i2c312 = &cfam2_i2c12; + i2c313 = &cfam2_i2c13; + i2c314 = &cfam2_i2c14; + i2c315 = &cfam2_i2c15; + i2c402 = &cfam3_i2c2; + i2c403 = &cfam3_i2c3; + i2c410 = &cfam3_i2c10; + i2c411 = &cfam3_i2c11; + i2c414 = &cfam3_i2c14; + i2c415 = &cfam3_i2c15; + i2c416 = &cfam3_i2c16; + i2c417 = &cfam3_i2c17; + + sbefifo100 = &sbefifo100; + sbefifo101 = &sbefifo101; + sbefifo110 = &sbefifo110; + sbefifo111 = &sbefifo111; + sbefifo112 = &sbefifo112; + sbefifo113 = &sbefifo113; + sbefifo114 = &sbefifo114; + sbefifo115 = &sbefifo115; + sbefifo202 = &sbefifo202; + sbefifo203 = &sbefifo203; + sbefifo210 = &sbefifo210; + sbefifo211 = &sbefifo211; + sbefifo214 = &sbefifo214; + sbefifo215 = &sbefifo215; + sbefifo216 = &sbefifo216; + sbefifo217 = &sbefifo217; + sbefifo300 = &sbefifo300; + sbefifo301 = &sbefifo301; + sbefifo310 = &sbefifo310; + sbefifo311 = &sbefifo311; + sbefifo312 = &sbefifo312; + sbefifo313 = &sbefifo313; + sbefifo314 = &sbefifo314; + sbefifo315 = &sbefifo315; + sbefifo402 = &sbefifo402; + sbefifo403 = &sbefifo403; + sbefifo410 = &sbefifo410; + sbefifo411 = &sbefifo411; + sbefifo414 = &sbefifo414; + sbefifo415 = &sbefifo415; + sbefifo416 = &sbefifo416; + sbefifo417 = &sbefifo417; + + scom100 = &scom100; + scom101 = &scom101; + scom110 = &scom110; + scom111 = &scom111; + scom112 = &scom112; + scom113 = &scom113; + scom114 = &scom114; + scom115 = &scom115; + scom202 = &scom202; + scom203 = &scom203; + scom210 = &scom210; + scom211 = &scom211; + scom214 = &scom214; + scom215 = &scom215; + scom216 = &scom216; + scom217 = &scom217; + scom300 = &scom300; + scom301 = &scom301; + scom310 = &scom310; + scom311 = &scom311; + scom312 = &scom312; + scom313 = &scom313; + scom314 = &scom314; + scom315 = &scom315; + scom402 = &scom402; + scom403 = &scom403; + scom410 = &scom410; + scom411 = &scom411; + scom414 = &scom414; + scom415 = &scom415; + scom416 = &scom416; + scom417 = &scom417; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + spi30 = &cfam2_spi0; + spi31 = &cfam2_spi1; + spi32 = &cfam2_spi2; + spi33 = &cfam2_spi3; + spi40 = &cfam3_spi0; + spi41 = &cfam3_spi1; + spi42 = &cfam3_spi2; + spi43 = &cfam3_spi3; + }; +}; + +&fsim0 { + #address-cells = <2>; + #size-cells = <0>; + status = "okay"; + bus-frequency = <100000000>; + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom100: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo100: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom101: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo101: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom110: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo110: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom111: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo111: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom112: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo112: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom113: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo113: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom114: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo114: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom115: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo115: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub0: fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom202: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo202: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom203: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo203: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom210: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo210: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom211: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo211: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom214: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo214: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom215: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo215: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom216: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo216: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom217: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo217: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@2,0 { + reg = <2 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <2>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom300: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo300: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom301: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo301: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom310: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo310: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom311: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo311: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom312: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo312: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom313: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo313: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom314: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo314: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom315: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo315: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam2_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam2_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam2_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@3,0 { + reg = <3 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <3>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom402: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo402: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom403: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo403: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom410: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo410: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom411: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo411: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom414: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo414: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom415: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo415: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom416: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo416: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom417: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo417: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam3_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam3_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam3_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile index 7099d9560033..d23cf466127b 100644 --- a/arch/arm/boot/dts/broadcom/Makefile +++ b/arch/arm/boot/dts/broadcom/Makefile @@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm6846-genexis-xg6846b.dtb \ bcm947622.dtb \ bcm963138.dtb \ bcm963138dvt.dtb \ @@ -64,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-luxul-xap-1410.dtb \ bcm47081-luxul-xwr-1200.dtb \ bcm47081-tplink-archer-c5-v2.dtb \ + bcm4709-asus-rt-ac3200.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-linksys-ea9200.dtb \ @@ -71,6 +73,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-netgear-r8000.dtb \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-asus-rt-ac3100.dtb \ + bcm47094-asus-rt-ac5300.dtb \ bcm47094-asus-rt-ac88u.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-dlink-dir-890l.dtb \ diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts index 8789fae178bf..4f8ddc1b3ab7 100644 --- a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts +++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts @@ -11,6 +11,10 @@ model = "BCM21664 Garnet board"; compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi index fa73600e883e..f0d0300079b6 100644 --- a/arch/arm/boot/dts/broadcom/bcm21664.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi @@ -1,21 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only // Copyright (C) 2014 Broadcom Corporation -#include <dt-bindings/clock/bcm21664.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "bcm2166x-common.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; - model = "BCM21664 SoC"; - compatible = "brcm,bcm21664"; interrupt-parent = <&gic>; - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -34,312 +24,46 @@ reg = <1>; }; }; +}; - gic: interrupt-controller@3ff00100 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x3ff01000 0x1000>, - <0x3ff00100 0x100>; - }; - - smc@3404e000 { - compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; - reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */ - }; - - uartb: serial@3e000000 { - compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - reg = <0x3e000000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb2: serial@3e001000 { - compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - reg = <0x3e001000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb3: serial@3e002000 { - compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - reg = <0x3e002000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - L2: cache-controller@3ff20000 { - compatible = "arm,pl310-cache"; - reg = <0x3ff20000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - brcm,resetmgr@35001f00 { - compatible = "brcm,bcm21664-resetmgr"; - reg = <0x35001f00 0x24>; - }; - - timer@35006000 { - compatible = "brcm,kona-timer"; - reg = <0x35006000 0x1c>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; - }; - - gpio: gpio@35003000 { - compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio"; - reg = <0x35003000 0x524>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; - - sdio1: mmc@3f180000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f180000 0x801c>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; - status = "disabled"; - }; - - sdio2: mmc@3f190000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f190000 0x801c>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; - status = "disabled"; - }; - - sdio3: mmc@3f1a0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f1a0000 0x801c>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; - status = "disabled"; - }; - - sdio4: mmc@3f1b0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f1b0000 0x801c>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; - status = "disabled"; - }; - - bsc1: i2c@3e016000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e016000 0x70>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; - status = "disabled"; - }; - - bsc2: i2c@3e017000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e017000 0x70>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; - status = "disabled"; - }; - - bsc3: i2c@3e018000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e018000 0x70>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; - status = "disabled"; - }; - - bsc4: i2c@3e01c000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e01c000 0x70>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; - status = "disabled"; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed clocks are defined before CCUs whose - * clocks may depend on them. - */ - - ref_32k_clk: ref_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - bbl_32k_clk: bbl_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - ref_13m_clk: ref_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - var_13m_clk: var_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - dft_19_5m_clk: dft_19_5m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <19500000>; - }; - - ref_crystal_clk: ref_crystal { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <26000000>; - }; - - ref_52m_clk: ref_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - var_52m_clk: var_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - usb_otg_ahb_clk: usb_otg_ahb { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - ref_96m_clk: ref_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - var_96m_clk: var_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - ref_104m_clk: ref_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; - - var_104m_clk: var_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; - - ref_156m_clk: ref_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; +&apps { + gic: interrupt-controller@1c01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x01c01000 0x1000>, + <0x01c00100 0x100>; }; - var_156m_clk: var_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; + L2: cache-controller@1c20000 { + compatible = "arm,pl310-cache"; + reg = <0x01c20000 0x1000>; + cache-unified; + cache-level = <2>; }; +}; - root_ccu: root_ccu@35001000 { - compatible = "brcm,bcm21664-root-ccu"; - reg = <0x35001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "frac_1m"; - }; +&bsc1 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - aon_ccu: aon_ccu@35002000 { - compatible = "brcm,bcm21664-aon-ccu"; - reg = <0x35002000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "hub_timer"; - }; +&bsc2 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - master_ccu: master_ccu@3f001000 { - compatible = "brcm,bcm21664-master-ccu"; - reg = <0x3f001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "sdio1", - "sdio2", - "sdio3", - "sdio4", - "sdio1_sleep", - "sdio2_sleep", - "sdio3_sleep", - "sdio4_sleep"; - }; +&bsc3 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - slave_ccu: slave_ccu@3e011000 { - compatible = "brcm,bcm21664-slave-ccu"; - reg = <0x3e011000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "uartb", - "uartb2", - "uartb3", - "bsc1", - "bsc2", - "bsc3", - "bsc4"; - }; - }; +&bsc4 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - usbotg: usb@3f120000 { - compatible = "snps,dwc2"; - reg = <0x3f120000 0x10000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_otg_ahb_clk>; - clock-names = "otg"; - phys = <&usbphy>; - phy-names = "usb2-phy"; - status = "disabled"; - }; +&gpio { + compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio"; +}; - usbphy: usb-phy@3f130000 { - compatible = "brcm,kona-usb2-phy"; - reg = <0x3f130000 0x28>; - #phy-cells = <0>; - status = "disabled"; - }; +&smc { + compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi new file mode 100644 index 000000000000..87180b7fd695 --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common device tree for components shared between the BCM21664 and BCM23550 + * SoCs. + * + * Copyright (C) 2016 Broadcom + */ + +/dts-v1/; + +#include <dt-bindings/clock/bcm21664.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + /* Hub bus */ + hub: hub-bus@34000000 { + compatible = "simple-bus"; + ranges = <0 0x34000000 0x102f83ac>; + #address-cells = <1>; + #size-cells = <1>; + + smc: smc@4e000 { + /* Compatible filled by SoC DTSI */ + reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ + }; + + resetmgr: reset-controller@1001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x01001f00 0x24>; + }; + + gpio: gpio@1003000 { + /* Compatible filled by SoC DTSI */ + reg = <0x01003000 0x524>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + timer@1006000 { + compatible = "brcm,kona-timer"; + reg = <0x01006000 0x1c>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; + }; + }; + + /* Slaves bus */ + slaves: slaves-bus@3e000000 { + compatible = "simple-bus"; + ranges = <0 0x3e000000 0x0001c070>; + #address-cells = <1>; + #size-cells = <1>; + + uartb: serial@0 { + compatible = "snps,dw-apb-uart"; + reg = <0x00000000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb2: serial@1000 { + compatible = "snps,dw-apb-uart"; + reg = <0x00001000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb3: serial@2000 { + compatible = "snps,dw-apb-uart"; + reg = <0x00002000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + bsc1: i2c@16000 { + /* Compatible filled by SoC DTSI */ + reg = <0x00016000 0x70>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; + status = "disabled"; + }; + + bsc2: i2c@17000 { + /* Compatible filled by SoC DTSI */ + reg = <0x00017000 0x70>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; + status = "disabled"; + }; + + bsc3: i2c@18000 { + /* Compatible filled by SoC DTSI */ + reg = <0x00018000 0x70>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; + status = "disabled"; + }; + + bsc4: i2c@1c000 { + /* Compatible filled by SoC DTSI */ + reg = <0x0001c000 0x70>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; + status = "disabled"; + }; + }; + + /* Apps bus */ + apps: apps-bus@3e300000 { + compatible = "simple-bus"; + ranges = <0 0x3e300000 0x01c02000>; + #address-cells = <1>; + #size-cells = <1>; + + usbotg: usb@e20000 { + compatible = "snps,dwc2"; + reg = <0x00e20000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@e30000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x00e30000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdio1: mmc@e80000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e80000 0x801c>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; + status = "disabled"; + }; + + sdio2: mmc@e90000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e90000 0x801c>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; + status = "disabled"; + }; + + sdio3: mmc@ea0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00ea0000 0x801c>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; + status = "disabled"; + }; + + sdio4: mmc@eb0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00eb0000 0x801c>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; + status = "disabled"; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + bbl_32k_clk: bbl_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + ref_13m_clk: ref_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + var_13m_clk: var_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + dft_19_5m_clk: dft_19_5m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + ref_52m_clk: ref_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + var_52m_clk: var_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + ref_96m_clk: ref_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + var_96m_clk: var_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + ref_104m_clk: ref_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + var_104m_clk: var_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + ref_156m_clk: ref_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + var_156m_clk: var_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu@35001000 { + compatible = "brcm,bcm21664-root-ccu"; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu@35002000 { + compatible = "brcm,bcm21664-aon-ccu"; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + slave_ccu: slave_ccu@3e011000 { + compatible = "brcm,bcm21664-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; + }; + + master_ccu: master_ccu@3f001000 { + compatible = "brcm,bcm21664-master-ccu"; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + }; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi index 50ebe93d6bd0..c1c69381286b 100644 --- a/arch/arm/boot/dts/broadcom/bcm23550.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi @@ -1,45 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause /* - * BSD LICENSE + * Device tree for the BCM23550 SoC. * - * Copyright(c) 2016 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * Copyright (C) 2016 Broadcom */ -/* BCM23550 and BCM21664 have almost identical clocks */ -#include <dt-bindings/clock/bcm21664.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "bcm2166x-common.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; - model = "BCM23550 SoC"; - compatible = "brcm,bcm23550"; interrupt-parent = <&gic>; cpus { @@ -80,180 +48,9 @@ clock-frequency = <1000000000>; }; }; +}; - /* Hub bus */ - hub@34000000 { - compatible = "simple-bus"; - ranges = <0 0x34000000 0x102f83ac>; - #address-cells = <1>; - #size-cells = <1>; - - smc@4e000 { - compatible = "brcm,bcm23550-smc", "brcm,kona-smc"; - reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ - }; - - resetmgr: reset-controller@1001f00 { - compatible = "brcm,bcm21664-resetmgr"; - reg = <0x01001f00 0x24>; - }; - - gpio: gpio@1003000 { - compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio"; - reg = <0x01003000 0x524>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; - - timer@1006000 { - compatible = "brcm,kona-timer"; - reg = <0x01006000 0x1c>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; - }; - }; - - /* Slaves bus */ - slaves@3e000000 { - compatible = "simple-bus"; - ranges = <0 0x3e000000 0x0001c070>; - #address-cells = <1>; - #size-cells = <1>; - - uartb: serial@0 { - compatible = "snps,dw-apb-uart"; - reg = <0x00000000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb2: serial@1000 { - compatible = "snps,dw-apb-uart"; - reg = <0x00001000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb3: serial@2000 { - compatible = "snps,dw-apb-uart"; - reg = <0x00002000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - bsc1: i2c@16000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x00016000 0x70>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; - status = "disabled"; - }; - - bsc2: i2c@17000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x00017000 0x70>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; - status = "disabled"; - }; - - bsc3: i2c@18000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x00018000 0x70>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; - status = "disabled"; - }; - - bsc4: i2c@1c000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x0001c000 0x70>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; - status = "disabled"; - }; - }; - - /* Apps bus */ - apps@3e300000 { - compatible = "simple-bus"; - ranges = <0 0x3e300000 0x01b77000>; - #address-cells = <1>; - #size-cells = <1>; - - usbotg: usb@e20000 { - compatible = "snps,dwc2"; - reg = <0x00e20000 0x10000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_otg_ahb_clk>; - clock-names = "otg"; - phys = <&usbphy>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - usbphy: usb-phy@e30000 { - compatible = "brcm,kona-usb2-phy"; - reg = <0x00e30000 0x28>; - #phy-cells = <0>; - status = "disabled"; - }; - - sdio1: mmc@e80000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00e80000 0x801c>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; - status = "disabled"; - }; - - sdio2: mmc@e90000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00e90000 0x801c>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; - status = "disabled"; - }; - - sdio3: mmc@ea0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00ea0000 0x801c>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; - status = "disabled"; - }; - - sdio4: mmc@eb0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00eb0000 0x801c>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; - status = "disabled"; - }; - +&apps { cdc: cdc@1b0e000 { compatible = "brcm,bcm23550-cdc"; reg = <0x01b0e000 0x78>; @@ -267,147 +64,28 @@ reg = <0x01b21000 0x1000>, <0x01b22000 0x1000>; }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed clocks are defined before CCUs whose - * clocks may depend on them. - */ - - ref_32k_clk: ref_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - bbl_32k_clk: bbl_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - ref_13m_clk: ref_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - var_13m_clk: var_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - dft_19_5m_clk: dft_19_5m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <19500000>; - }; - - ref_crystal_clk: ref_crystal { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <26000000>; - }; - - ref_52m_clk: ref_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - var_52m_clk: var_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - usb_otg_ahb_clk: usb_otg_ahb { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - ref_96m_clk: ref_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - var_96m_clk: var_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - ref_104m_clk: ref_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; - - var_104m_clk: var_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; +}; - ref_156m_clk: ref_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; - }; +&bsc1 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - var_156m_clk: var_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; - }; +&bsc2 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - root_ccu: root_ccu@35001000 { - compatible = "brcm,bcm21664-root-ccu"; - reg = <0x35001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "frac_1m"; - }; +&bsc3 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - aon_ccu: aon_ccu@35002000 { - compatible = "brcm,bcm21664-aon-ccu"; - reg = <0x35002000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "hub_timer"; - }; +&bsc4 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - slave_ccu: slave_ccu@3e011000 { - compatible = "brcm,bcm21664-slave-ccu"; - reg = <0x3e011000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "uartb", - "uartb2", - "uartb3", - "bsc1", - "bsc2", - "bsc3", - "bsc4"; - }; +&gpio { + compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio"; +}; - master_ccu: master_ccu@3f001000 { - compatible = "brcm,bcm21664-master-ccu"; - reg = <0x3f001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "sdio1", - "sdio2", - "sdio3", - "sdio4", - "sdio1_sleep", - "sdio2_sleep", - "sdio3_sleep", - "sdio4_sleep"; - }; - }; +&smc { + compatible = "brcm,bcm23550-smc", "brcm,kona-smc"; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts index d5f8823230db..353bb50ce542 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -5,6 +5,7 @@ #include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -15,6 +16,13 @@ stdout-path = "serial1:115200n8"; }; + cam1_reg: regulator-cam1 { + compatible = "regulator-fixed"; + regulator-name = "cam1-reg"; + enable-active-high; + gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; + }; + sd_io_1v8_reg: regulator-sd-io-1v8 { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io"; @@ -197,6 +205,27 @@ phy1: ethernet-phy@1 { /* No PHY interrupt */ reg = <0x1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + /* LED1 */ + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + /* LED2 */ + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts index 5a2869a18bd5..ca9be91b4f36 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts @@ -30,6 +30,7 @@ &genet_mdio { clock-frequency = <1950000>; + /delete-node/ leds; }; &led_pwr { diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts index d7ba02f586d3..6bc77dd48c0d 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/leds/common.h> #include "bcm2711-rpi-cm4.dtsi" #include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-host.dtsi" @@ -101,6 +102,38 @@ status = "okay"; }; +&i2c0_1 { + rtc@51 { + /* Attention: An alarm resets the machine */ + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; +}; + +&phy1 { + leds { + #address-cells = <1>; + #size-cells = <0>; + + /* LED2 */ + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + /* LED3 */ + led@2 { + reg = <2>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; +}; + &led_act { gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi index d233a191c139..c78ed064d166 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm2835-rpi.dtsi" -#include <dt-bindings/power/raspberrypi-power.h> #include <dt-bindings/reset/raspberrypi,firmware-reset.h> / { @@ -17,14 +16,33 @@ pcie0 = &pcie0; blconfig = &blconfig; }; -}; -&firmware { - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; + i2c0mux: i2c-mux0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c0>; + + pinctrl-names = "i2c0", "i2c0-vc"; + pinctrl-0 = <&i2c0_gpio0>; + pinctrl-1 = <&i2c0_gpio44>; + + i2c0_0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c0_1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; }; +}; +&firmware { expgpio: gpio { compatible = "raspberrypi,firmware-gpio"; gpio-controller; @@ -54,6 +72,11 @@ clocks = <&firmware_clocks 4>; }; +&i2c0 { + /delete-property/ pinctrl-names; + /delete-property/ pinctrl-0; +}; + &rmem { /* * RPi4's co-processor will copy the board's bootloader configuration @@ -77,7 +100,3 @@ &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; - -&xhci { - power-domains = <&power RPI_POWER_DOMAIN_USB>; -}; diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi index 22c7f1561344..c06d9f5e53c8 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi @@ -134,7 +134,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -145,7 +145,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -156,7 +156,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -167,7 +167,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -432,8 +432,8 @@ }; }; - arm-pmu { - compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3"; + pmu { + compatible = "arm,cortex-a72-pmu"; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -451,8 +451,6 @@ IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - /* This only applies to the ARMv7 stub */ - arm,cpu-registers-not-fw-configured; }; cpus: cpus { @@ -610,6 +608,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pm BCM2835_POWER_DOMAIN_USB>; /* DWC2 and this IP block share the same USB PHY, * enabling both at the same time results in lockups. * So keep this node disabled and let the bootloader @@ -1114,6 +1113,14 @@ #address-cells = <2>; }; +&csi0 { + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; +}; + +&csi1 { + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; +}; + &cma { /* * arm64 reserves the CMA by default somewhere in ZONE_DMA32, @@ -1169,6 +1176,7 @@ }; &uart0 { + arm,primecell-periphid = <0x00341011>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi index 4e7b4a592da7..8b3c21d9f333 100644 --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi @@ -7,13 +7,6 @@ #include <dt-bindings/power/raspberrypi-power.h> -&firmware { - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; - }; -}; - &hdmi { clocks = <&firmware_clocks 9>, <&firmware_clocks 13>; diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi index f0acc9390f31..e9bf41b9f5c1 100644 --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi @@ -4,11 +4,12 @@ soc { firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - mboxes = <&mailbox>; - dma-ranges; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; }; power: power { @@ -25,6 +26,20 @@ }; }; +&csi0 { + clocks = <&clocks BCM2835_CLOCK_CAM0>, + <&firmware_clocks 4>; + clock-names = "lp", "vpu"; + power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; +}; + +&csi1 { + clocks = <&clocks BCM2835_CLOCK_CAM1>, + <&firmware_clocks 4>; + clock-names = "lp", "vpu"; + power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; +}; + &gpio { gpioout: gpioout { brcm,pins = <6>; diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts index 72d26d130efa..85f54fa595aa 100644 --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts @@ -77,7 +77,7 @@ }; &hdmi { - hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi index 84c08b46519d..c281697142b1 100644 --- a/arch/arm/boot/dts/broadcom/bcm2837.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi @@ -9,7 +9,7 @@ <0x40000000 0x40000000 0x00001000>; dma-ranges = <0xc0000000 0x00000000 0x3f000000>; - local_intc: local_intc@40000000 { + local_intc: interrupt-controller@40000000 { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; interrupt-controller; diff --git a/arch/arm/boot/dts/broadcom/bcm283x.dtsi b/arch/arm/boot/dts/broadcom/bcm283x.dtsi index 2ca8a2505a4d..69b0919f1324 100644 --- a/arch/arm/boot/dts/broadcom/bcm283x.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm283x.dtsi @@ -454,6 +454,30 @@ status = "disabled"; }; + csi0: csi@7e800000 { + compatible = "brcm,bcm2835-unicam"; + reg = <0x7e800000 0x800>, + <0x7e802000 0x4>; + reg-names = "unicam", "cmi"; + interrupts = <2 6>; + brcm,num-data-lanes = <2>; + status = "disabled"; + port { + }; + }; + + csi1: csi@7e801000 { + compatible = "brcm,bcm2835-unicam"; + reg = <0x7e801000 0x800>, + <0x7e802004 0x4>; + reg-names = "unicam", "cmi"; + interrupts = <2 7>; + brcm,num-data-lanes = <4>; + status = "disabled"; + port { + }; + }; + i2c1: i2c@7e804000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts new file mode 100644 index 000000000000..3da2daee0c84 --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Tom Brautaset <tbrautaset@gmail.com> + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708"; + model = "ASUS RT-AC3200"; + + memory@0 { + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + device_type = "memory"; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-wifi { + label = "Wi-Fi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-red { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_WAN; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-wps { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_WPS; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; +}; + +&gmac2 { + nvmem-cells = <&et0macaddr 2>; + nvmem-cell-names = "mac-address"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000000 0x00080000>; + label = "boot"; + read-only; + }; + + partition@80000 { + reg = <0x00080000 0x00180000>; + label = "nvram"; + }; + + partition@200000 { + compatible = "brcm,trx"; + reg = <0x00200000 0x07e00000>; + label = "firmware"; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "wan"; + }; + + port@1 { + label = "lan4"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan2"; + }; + + port@4 { + label = "lan1"; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts index 5f089307cd8c..1655ac95769c 100644 --- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts +++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts @@ -13,11 +13,22 @@ nvram@1c080000 { et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; }; }; }; &gmac0 { - nvmem-cells = <&et0macaddr>; + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; +}; + +&gmac2 { + nvmem-cells = <&et0macaddr 2>; nvmem-cell-names = "mac-address"; }; diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi index 09cefce27fb1..2cfaaabc7a6a 100644 --- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi @@ -6,15 +6,13 @@ #include "bcm47094.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" -/ { - chosen { - bootargs = "earlycon"; - }; +#include <dt-bindings/leds/common.h> +/ { memory@0 { - device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x18000000>; + device_type = "memory"; }; nvram@1c080000 { @@ -22,76 +20,108 @@ reg = <0x1c080000 0x00180000>; }; - leds { - compatible = "gpio-leds"; + gpio-keys { + compatible = "gpio-keys"; - led-power { - label = "white:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; + button-led { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - led-wan-red { - label = "red:wan"; - gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + button-reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-wifi { + label = "Wi-Fi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-lan { - label = "white:lan"; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; }; + led-power { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + led-usb2 { - label = "white:usb2"; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_USB; + function-enumerator = <1>; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; trigger-sources = <&ehci_port2>; linux,default-trigger = "usbport"; }; led-usb3 { - label = "white:usb3"; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_USB; + function-enumerator = <2>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; trigger-sources = <&ehci_port1>, <&xhci_port1>; linux,default-trigger = "usbport"; }; + led-wan-red { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_WAN; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + led-wps { - label = "white:wps"; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_WPS; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; }; }; +}; - gpio-keys { - compatible = "gpio-keys"; - - button-wps { - label = "WPS"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; - }; +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - button-reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + partition@0 { + reg = <0x00000000 0x00080000>; + label = "boot"; + read-only; }; - button-wifi { - label = "Wi-Fi"; - linux,code = <KEY_RFKILL>; - gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + partition@80000 { + reg = <0x00080000 0x00180000>; + label = "nvram"; }; - button-led { - label = "Backlight"; - linux,code = <KEY_BRIGHTNESS_ZERO>; - gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + partition@200000 { + compatible = "brcm,trx"; + reg = <0x00200000 0x07e00000>; + label = "firmware"; }; }; }; &srab { - compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; status = "okay"; ports { @@ -136,28 +166,3 @@ &usb3_phy { status = "okay"; }; - -&nandcs { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00080000>; - read-only; - }; - - partition@80000 { - label = "nvram"; - reg = <0x00080000 0x00180000>; - }; - - partition@200000 { - label = "firmware"; - reg = <0x00200000 0x07e00000>; - compatible = "brcm,trx"; - }; - }; -}; diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts new file mode 100644 index 000000000000..01ec8c03686a --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Tom Brautaset <tbrautaset@gmail.com> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708"; + model = "ASUS RT-AC5300"; + + memory@0 { + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + device_type = "memory"; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + + et1macaddr: et1macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-wifi { + label = "Wi-Fi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-lan { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + + led-power { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-red { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_WAN; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-wps { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_WPS; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et1macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr 1>; + nvmem-cell-names = "mac-address"; +}; + +&gmac2 { + nvmem-cells = <&et1macaddr 2>; + nvmem-cell-names = "mac-address"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000000 0x00080000>; + label = "boot"; + read-only; + }; + + partition@80000 { + reg = <0x00080000 0x00180000>; + label = "nvram"; + }; + + partition@200000 { + compatible = "brcm,trx"; + reg = <0x00200000 0x07e00000>; + label = "firmware"; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "wan"; + }; + + port@1 { + label = "lan1"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan3"; + }; + + port@4 { + label = "lan4"; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts index fd344b55087e..a197f447fd97 100644 --- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts @@ -13,18 +13,40 @@ nvram@1c080000 { et1macaddr: et1macaddr { + #nvmem-cell-cells = <1>; }; }; switch { compatible = "realtek,rtl8365mb"; - /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; realtek,disable-leds; dsa,member = <1 0>; + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + }; + ports { #address-cells = <1>; #size-cells = <0>; @@ -68,29 +90,21 @@ }; }; }; + }; +}; - mdio { - compatible = "realtek,smi-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; +&gmac0 { + status = "disabled"; +}; - ethphy2: ethernet-phy@2 { - reg = <2>; - }; +&gmac1 { + nvmem-cells = <&et1macaddr 0>; + nvmem-cell-names = "mac-address"; +}; - ethphy3: ethernet-phy@3 { - reg = <3>; - }; - }; - }; +&gmac2 { + nvmem-cells = <&et1macaddr 1>; + nvmem-cell-names = "mac-address"; }; &srab { @@ -111,12 +125,3 @@ }; }; }; - -&gmac0 { - status = "disabled"; -}; - -&gmac1 { - nvmem-cells = <&et1macaddr>; - nvmem-cell-names = "mac-address"; -}; diff --git a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts index 0bf5106f7012..08abfdc63d18 100644 --- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts +++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts @@ -59,6 +59,9 @@ &gmac0 { status = "okay"; + + nvmem-cells = <&macaddr_board_config_66>; + nvmem-cell-names = "mac-address"; }; &gmac1 { @@ -102,8 +105,25 @@ }; partition@800000 { + compatible = "linux,ubi"; label = "ubi"; reg = <0x800000 0x7780000>; + + volumes { + ubi-volume-board-config { + volname = "board-config"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_board_config_66: macaddr@66 { + reg = <0x66 0x6>; + }; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts index 25eeacf6a248..45bd27906f29 100644 --- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts @@ -215,11 +215,15 @@ reg = <0x50>; pagesize = <32>; read-only; - #address-cells = <1>; - #size-cells = <1>; - mac_address: mac-address@66 { - reg = <0x66 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts index 975f854f652f..08cf1220b655 100644 --- a/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts +++ b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts @@ -32,7 +32,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { compatible = "m25p80"; diff --git a/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts new file mode 100644 index 000000000000..a3616fb7b3a8 --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 Linus Walleij <linus.walleij@linaro.org> + */ + +/dts-v1/; + +#include "bcm6846.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Genexis XG6846B Ethernet layer 2/3 router"; + compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* Micron D9PTK 256 MB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + secondary-boot@0 { + no-map; + reg = <0x00000000 0x00008000>; + }; + pmc3-firmware@8000 { + no-map; + reg = <0x00008000 0x00100000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <20000>; + + /* Called "canyon rescue button" in the vendor DTB */ + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 41 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; + /* Totally 79 GPIOs are available */ + ngpios = <15>; +}; + +&uart0 { + status = "okay"; +}; + +&leds { + status = "okay"; + brcm,serial-shift-bits = <16>; + + led@0 { + reg = <0>; + active-low; + function = "ext"; + color = <LED_COLOR_ID_GREEN>; + }; + + led@1 { + reg = <1>; + active-low; + function = "ext"; + color = <LED_COLOR_ID_AMBER>; + }; + + led@3 { + reg = <3>; + active-low; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_AMBER>; + }; + + led@4 { + reg = <4>; + active-low; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + active-low; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + }; + + led@6 { + reg = <6>; + active-low; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + }; + + led@15 { + reg = <15>; + active-low; + function = LED_FUNCTION_USB; + color = <LED_COLOR_ID_GREEN>; + }; + + led@7 { + /* Activity 03 */ + reg = <7>; + active-low; + function = "lan1"; + color = <LED_COLOR_ID_AMBER>; + }; + + led@8 { + /* Activity 04 */ + reg = <8>; + active-low; + function = "lan1"; + color = <LED_COLOR_ID_GREEN>; + }; + + led@9 { + /* Activity 03 */ + reg = <9>; + active-low; + function = "lan2"; + color = <LED_COLOR_ID_AMBER>; + }; + + led@10 { + /* Activity 04 */ + reg = <10>; + active-low; + function = "lan2"; + color = <LED_COLOR_ID_GREEN>; + }; + + led@11 { + /* Activity 03 */ + reg = <11>; + active-low; + function = "lan3"; + color = <LED_COLOR_ID_AMBER>; + }; + + led@12 { + /* Activity 04 */ + reg = <12>; + active-low; + function = "lan3"; + color = <LED_COLOR_ID_GREEN>; + }; + + led@13 { + /* Activity 03 */ + reg = <13>; + active-low; + function = "lan4"; + color = <LED_COLOR_ID_AMBER>; + }; + + led@14 { + /* Activity 04 */ + reg = <14>; + active-low; + function = "lan4"; + color = <LED_COLOR_ID_GREEN>; + }; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; + + /* Winbond W29N02GV, 256MB with 128KB erase blocks */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + loader@0 { + label = "loader"; + reg = <0x00000000 0x00400000>; + }; + image@400000 { + label = "image"; + reg = <0x00400000 0x0fb00000>; + }; + /* 0x00ff0000-0x00ffffff: bad block list */ + }; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + }; + phy21: ethernet-phy@21 { + reg = <21>; + }; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi index ee361cb00b7c..e0e06af3fe89 100644 --- a/arch/arm/boot/dts/broadcom/bcm6846.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi @@ -99,6 +99,91 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x10>; + }; + + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + uart0: serial@640 { compatible = "brcm,bcm6345-uart"; reg = <0x640 0x1b>; @@ -108,6 +193,19 @@ status = "disabled"; }; + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + }; + + leds: led-controller@800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + status = "disabled"; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -133,5 +231,27 @@ reg = <0>; }; }; + + mdio: mdio@2060 { + compatible = "brcm,bcm6846-mdio"; + reg = <0x02060 0x10>, <0x5a068 0x4>; + reg-names = "mdio", "mdio_indir_rw"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pl081_dma: dma-controller@59000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x59000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm953012hr.dts b/arch/arm/boot/dts/broadcom/bcm953012hr.dts index b070b69466bd..b728cd54715e 100644 --- a/arch/arm/boot/dts/broadcom/bcm953012hr.dts +++ b/arch/arm/boot/dts/broadcom/bcm953012hr.dts @@ -74,7 +74,6 @@ &spi_nor { status = "okay"; spi-max-frequency = <62500000>; - m25p,default-addr-width = <3>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm953012k.dts b/arch/arm/boot/dts/broadcom/bcm953012k.dts index f1e6bcaa1edd..27c0992f1855 100644 --- a/arch/arm/boot/dts/broadcom/bcm953012k.dts +++ b/arch/arm/boot/dts/broadcom/bcm953012k.dts @@ -84,7 +84,6 @@ &spi_nor { status = "okay"; spi-max-frequency = <62500000>; - m25p,default-addr-width = <3>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm958522er.dts b/arch/arm/boot/dts/broadcom/bcm958522er.dts index 15f023656df0..2f20f86bd31c 100644 --- a/arch/arm/boot/dts/broadcom/bcm958522er.dts +++ b/arch/arm/boot/dts/broadcom/bcm958522er.dts @@ -135,7 +135,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm958525er.dts b/arch/arm/boot/dts/broadcom/bcm958525er.dts index 9b9c225a1fb3..980c03f74a19 100644 --- a/arch/arm/boot/dts/broadcom/bcm958525er.dts +++ b/arch/arm/boot/dts/broadcom/bcm958525er.dts @@ -135,7 +135,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm958525xmc.dts b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts index ca9311452739..440bb2d617f2 100644 --- a/arch/arm/boot/dts/broadcom/bcm958525xmc.dts +++ b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts @@ -151,7 +151,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm958622hr.dts b/arch/arm/boot/dts/broadcom/bcm958622hr.dts index 9db3c851451a..116f3a7c3bc6 100644 --- a/arch/arm/boot/dts/broadcom/bcm958622hr.dts +++ b/arch/arm/boot/dts/broadcom/bcm958622hr.dts @@ -139,7 +139,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm958623hr.dts b/arch/arm/boot/dts/broadcom/bcm958623hr.dts index 32786e7c4e12..fc6ab73ecf56 100644 --- a/arch/arm/boot/dts/broadcom/bcm958623hr.dts +++ b/arch/arm/boot/dts/broadcom/bcm958623hr.dts @@ -143,7 +143,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi index b0854d881ac6..71a8b77b46f4 100644 --- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi @@ -55,11 +55,15 @@ reg = <0x50>; pagesize = <32>; read-only; - #address-cells = <1>; - #size-cells = <1>; - mac_address: mac-address@66 { - reg = <0x66 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts index 74263d98de73..a9b6aa04d573 100644 --- a/arch/arm/boot/dts/broadcom/bcm958625hr.dts +++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts @@ -150,7 +150,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm958625k.dts b/arch/arm/boot/dts/broadcom/bcm958625k.dts index 69ebc7a913a7..7996116fc923 100644 --- a/arch/arm/boot/dts/broadcom/bcm958625k.dts +++ b/arch/arm/boot/dts/broadcom/bcm958625k.dts @@ -154,7 +154,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/broadcom/bcm988312hr.dts b/arch/arm/boot/dts/broadcom/bcm988312hr.dts index e96bc3f2d5cf..663a3f27b6e4 100644 --- a/arch/arm/boot/dts/broadcom/bcm988312hr.dts +++ b/arch/arm/boot/dts/broadcom/bcm988312hr.dts @@ -139,7 +139,6 @@ &qspi { status = "okay"; - bspi-sel = <0>; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile index e944d3e2129d..e6015983e464 100644 --- a/arch/arm/boot/dts/cirrus/Makefile +++ b/arch/arm/boot/dts/cirrus/Makefile @@ -3,3 +3,7 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb +dtb-$(CONFIG_ARCH_EP93XX) += \ + ep93xx-edb9302.dtb \ + ep93xx-bk3.dtb \ + ep93xx-ts7250.dtb diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts index 7fb532f227af..adc74243ed19 100644 --- a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts @@ -30,7 +30,7 @@ display-timings { native-mode = <&timing0>; - timing0: 320x240 { + timing0: timing-320x240 { hactive = <320>; hback-porch = <0>; hfront-porch = <0>; @@ -88,7 +88,7 @@ }; &portd { - lcden { + lcden-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts new file mode 100644 index 000000000000..40bc9b2a6ba8 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" + +/ { + model = "Liebherr controller BK3.1"; + compatible = "liebherr,bk3", "cirrus,ep9301"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x00000000 0x02000000>, + <0x000530c0 0x01fdd000>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +&ebi { + nand-controller@60000000 { + compatible = "technologic,ts7200-nand"; + reg = <0x60000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "System"; + reg = <0x00000000 0x01e00000>; + read-only; + }; + + partition@1e00000 { + label = "Data"; + reg = <0x01e00000 0x05f20000>; + }; + + partition@7d20000 { + label = "RedBoot"; + reg = <0x07d20000 0x002e0000>; + read-only; + }; + }; + }; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&i2s { + dmas = <&dma0 0 1>, <&dma0 0 2>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_on_ac97_pins>; + status = "okay"; +}; + +&gpio1 { + /* PWM */ + gpio-ranges = <&syscon 6 163 1>; +}; + +&gpio4 { + gpio-ranges = <&syscon 0 97 2>; + status = "okay"; +}; + +&gpio6 { + gpio-ranges = <&syscon 0 87 2>; + status = "okay"; +}; + +&gpio7 { + gpio-ranges = <&syscon 2 199 4>; + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts new file mode 100644 index 000000000000..312b2be1c638 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +/* + * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cirrus,edb9302", "cirrus,ep9301"; + model = "cirrus,edb9302"; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x0000000 0x800000>, + <0x1000000 0x800000>, + <0x4000000 0x800000>, + <0x5000000 0x800000>; + }; + + sound { + compatible = "audio-graph-card2"; + label = "EDB93XX"; + links = <&i2s_port>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&ebi { + flash@60000000 { + compatible = "cfi-flash"; + reg = <0x60000000 0x1000000>; + bank-width = <2>; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&gpio0 { + gpio-ranges = <&syscon 0 153 1>, + <&syscon 1 152 1>, + <&syscon 2 151 1>, + <&syscon 3 148 1>, + <&syscon 4 147 1>, + <&syscon 5 146 1>, + <&syscon 6 145 1>, + <&syscon 7 144 1>; +}; + +&gpio1 { + gpio-ranges = <&syscon 0 143 1>, + <&syscon 1 142 1>, + <&syscon 2 141 1>, + <&syscon 3 140 1>, + <&syscon 4 165 1>, + <&syscon 5 164 1>, + <&syscon 6 163 1>, + <&syscon 7 160 1>; +}; + +&gpio2 { + gpio-ranges = <&syscon 0 115 1>; +}; + +/* edb9302 doesn't have GPIO Port D present */ +&gpio3 { + status = "disabled"; +}; + +&gpio4 { + gpio-ranges = <&syscon 0 97 2>; +}; + +&gpio5 { + gpio-ranges = <&syscon 1 170 1>, + <&syscon 2 169 1>, + <&syscon 3 168 1>; +}; + +&gpio6 { + gpio-ranges = <&syscon 0 87 2>; +}; + +&gpio7 { + gpio-ranges = <&syscon 2 199 4>; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&i2s_on_ac97_pins>; + status = "okay"; + i2s_port: port { + i2s_ep: endpoint { + system-clock-direction-out; + frame-master; + bitclock-master; + mclk-fs = <256>; + dai-format = "i2s"; + convert-channels = <2>; + convert-sample-format = "s32_le"; + remote-endpoint = <&codec_ep>; + }; + }; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&spi0 { + cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW + &gpio0 7 GPIO_ACTIVE_LOW>; + dmas = <&dma1 10 2>, <&dma1 10 1>; + dma-names = "rx", "tx"; + status = "okay"; + + cs4271: codec@0 { + compatible = "cirrus,cs4271"; + reg = <0>; + #sound-dai-cells = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + port { + codec_ep: endpoint { + remote-endpoint = <&i2s_ep>; + }; + }; + }; + + at25f1024: eeprom@1 { + compatible = "atmel,at25"; + reg = <1>; + address-width = <8>; + size = <0x20000>; + pagesize = <256>; + spi-max-frequency = <20000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts new file mode 100644 index 000000000000..9e03f93d9fc8 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" + +/ { + compatible = "technologic,ts7250", "cirrus,ep9301"; + model = "TS-7250 SBC"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x00000000 0x02000000>, + <0x000530c0 0x01fdd000>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +&ebi { + nand-controller@60000000 { + compatible = "technologic,ts7200-nand"; + reg = <0x60000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "TS-BOOTROM"; + reg = <0x00000000 0x00020000>; + read-only; + }; + + partition@20000 { + label = "Linux"; + reg = <0x00020000 0x07d00000>; + }; + + partition@7d20000 { + label = "RedBoot"; + reg = <0x07d20000 0x002e0000>; + read-only; + }; + }; + }; + }; + + rtc@10800000 { + compatible = "st,m48t86"; + reg = <0x10800000 0x1>, + <0x11700000 0x1>; + }; + + watchdog@23800000 { + compatible = "technologic,ts7200-wdt"; + reg = <0x23800000 0x01>, + <0x23c00000 0x01>; + timeout-sec = <30>; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&gpio1 { + /* PWM */ + gpio-ranges = <&syscon 6 163 1>; +}; + +/* ts7250 doesn't have GPIO Port D present */ +&gpio3 { + status = "disabled"; +}; + +&gpio4 { + gpio-ranges = <&syscon 0 97 2>; +}; + +&gpio6 { + gpio-ranges = <&syscon 0 87 2>; +}; + +&gpio7 { + gpio-ranges = <&syscon 2 199 4>; +}; + +&spi0 { + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + dmas = <&dma1 10 2>, <&dma1 10 1>; + dma-names = "rx", "tx"; + status = "okay"; + + tmp122: temperature-sensor@0 { + compatible = "ti,tmp122"; + reg = <0>; + spi-max-frequency = <2000000>; + }; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi new file mode 100644 index 000000000000..0dd1eee346ca --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Cirrus Logic systems EP93XX SoC + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/clock/cirrus,ep9301-syscon.h> +/ { + soc: soc { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + syscon: syscon@80930000 { + compatible = "cirrus,ep9301-syscon", "syscon"; + reg = <0x80930000 0x1000>; + + #clock-cells = <1>; + clocks = <&xtali>; + + spi_default_pins: pins-spi { + function = "spi"; + groups = "ssp"; + }; + + ac97_default_pins: pins-ac97 { + function = "ac97"; + groups = "ac97"; + }; + + i2s_on_ssp_pins: pins-i2sonssp { + function = "i2s"; + groups = "i2s_on_ssp"; + }; + + i2s_on_ac97_pins: pins-i2sonac97 { + function = "i2s"; + groups = "i2s_on_ac97"; + }; + + gpio1_default_pins: pins-gpio1 { + function = "gpio"; + groups = "gpio1agrp"; + }; + + pwm1_default_pins: pins-pwm1 { + function = "pwm"; + groups = "pwm1"; + }; + + gpio2_default_pins: pins-gpio2 { + function = "gpio"; + groups = "gpio2agrp"; + }; + + gpio3_default_pins: pins-gpio3 { + function = "gpio"; + groups = "gpio3agrp"; + }; + + keypad_default_pins: pins-keypad { + function = "keypad"; + groups = "keypadgrp"; + }; + + gpio4_default_pins: pins-gpio4 { + function = "gpio"; + groups = "gpio4agrp"; + }; + + gpio6_default_pins: pins-gpio6 { + function = "gpio"; + groups = "gpio6agrp"; + }; + + gpio7_default_pins: pins-gpio7 { + function = "gpio"; + groups = "gpio7agrp"; + }; + + ide_default_pins: pins-ide { + function = "pata"; + groups = "idegrp"; + }; + + lcd_on_dram0_pins: pins-rasteronsdram0 { + function = "lcd"; + groups = "rasteronsdram0grp"; + }; + + lcd_on_dram3_pins: pins-rasteronsdram3 { + function = "lcd"; + groups = "rasteronsdram3grp"; + }; + }; + + adc: adc@80900000 { + compatible = "cirrus,ep9301-adc"; + reg = <0x80900000 0x28>; + clocks = <&syscon EP93XX_CLK_ADC>; + interrupt-parent = <&vic0>; + interrupts = <30>; + status = "disabled"; + }; + + /* + * The EP93XX expansion bus is a set of up to 7 each up to 16MB + * windows in the 256MB space from 0x50000000 to 0x5fffffff. + * But since we don't require to setup it in any way, we can + * represent it as a simple-bus. + */ + ebi: bus@80080000 { + compatible = "simple-bus"; + reg = <0x80080000 0x20>; + native-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + dma0: dma-controller@80000000 { + compatible = "cirrus,ep9301-dma-m2p"; + reg = <0x80000000 0x0040>, + <0x80000040 0x0040>, + <0x80000080 0x0040>, + <0x800000c0 0x0040>, + <0x80000240 0x0040>, + <0x80000200 0x0040>, + <0x800002c0 0x0040>, + <0x80000280 0x0040>, + <0x80000340 0x0040>, + <0x80000300 0x0040>; + clocks = <&syscon EP93XX_CLK_M2P0>, + <&syscon EP93XX_CLK_M2P1>, + <&syscon EP93XX_CLK_M2P2>, + <&syscon EP93XX_CLK_M2P3>, + <&syscon EP93XX_CLK_M2P4>, + <&syscon EP93XX_CLK_M2P5>, + <&syscon EP93XX_CLK_M2P6>, + <&syscon EP93XX_CLK_M2P7>, + <&syscon EP93XX_CLK_M2P8>, + <&syscon EP93XX_CLK_M2P9>; + clock-names = "m2p0", "m2p1", + "m2p2", "m2p3", + "m2p4", "m2p5", + "m2p6", "m2p7", + "m2p8", "m2p9"; + interrupt-parent = <&vic0>; + interrupts = <7>, <8>, <9>, <10>, <11>, + <12>, <13>, <14>, <15>, <16>; + #dma-cells = <2>; + }; + + dma1: dma-controller@80000100 { + compatible = "cirrus,ep9301-dma-m2m"; + reg = <0x80000100 0x0040>, + <0x80000140 0x0040>; + clocks = <&syscon EP93XX_CLK_M2M0>, + <&syscon EP93XX_CLK_M2M1>; + clock-names = "m2m0", "m2m1"; + interrupt-parent = <&vic0>; + interrupts = <17>, <18>; + #dma-cells = <2>; + }; + + eth0: ethernet@80010000 { + compatible = "cirrus,ep9301-eth"; + reg = <0x80010000 0x10000>; + interrupt-parent = <&vic1>; + interrupts = <7>; + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gpio0: gpio@80840000 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840000 0x04>, + <0x80840010 0x04>, + <0x80840090 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio1: gpio@80840004 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840004 0x04>, + <0x80840014 0x04>, + <0x808400ac 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio2: gpio@80840008 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840008 0x04>, + <0x80840018 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio2_default_pins>; + }; + + gpio3: gpio@8084000c { + compatible = "cirrus,ep9301-gpio"; + reg = <0x8084000c 0x04>, + <0x8084001c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio3_default_pins>; + }; + + gpio4: gpio@80840020 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840020 0x04>, + <0x80840024 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio4_default_pins>; + }; + + gpio5: gpio@80840030 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840030 0x04>, + <0x80840034 0x04>, + <0x8084004c 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&vic0 19>, <&vic0 20>, + <&vic0 21>, <&vic0 22>, + <&vic1 15>, <&vic1 16>, + <&vic1 17>, <&vic1 18>; + }; + + gpio6: gpio@80840038 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840038 0x04>, + <0x8084003c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio6_default_pins>; + }; + + gpio7: gpio@80840040 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840040 0x04>, + <0x80840044 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio7_default_pins>; + }; + + i2s: i2s@80820000 { + compatible = "cirrus,ep9301-i2s"; + reg = <0x80820000 0x100>; + #sound-dai-cells = <0>; + interrupt-parent = <&vic1>; + interrupts = <28>; + clocks = <&syscon EP93XX_CLK_I2S_MCLK>, + <&syscon EP93XX_CLK_I2S_SCLK>, + <&syscon EP93XX_CLK_I2S_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + dmas = <&dma0 0 1>, <&dma0 0 2>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + ide: ide@800a0000 { + compatible = "cirrus,ep9312-pata"; + reg = <0x800a0000 0x38>; + interrupt-parent = <&vic1>; + interrupts = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&ide_default_pins>; + status = "disabled"; + }; + + vic0: interrupt-controller@800b0000 { + compatible = "arm,pl192-vic"; + reg = <0x800b0000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + valid-mask = <0x7ffffffc>; + valid-wakeup-mask = <0x0>; + }; + + vic1: interrupt-controller@800c0000 { + compatible = "arm,pl192-vic"; + reg = <0x800c0000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + valid-mask = <0x1fffffff>; + valid-wakeup-mask = <0x0>; + }; + + keypad: keypad@800f0000 { + compatible = "cirrus,ep9307-keypad"; + reg = <0x800f0000 0x0c>; + interrupt-parent = <&vic0>; + interrupts = <29>; + clocks = <&syscon EP93XX_CLK_KEYPAD>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default_pins>; + linux,keymap = <KEY_UP>, + <KEY_DOWN>, + <KEY_VOLUMEDOWN>, + <KEY_HOME>, + <KEY_RIGHT>, + <KEY_LEFT>, + <KEY_ENTER>, + <KEY_VOLUMEUP>, + <KEY_F6>, + <KEY_F8>, + <KEY_F9>, + <KEY_F10>, + <KEY_F1>, + <KEY_F2>, + <KEY_F3>, + <KEY_POWER>; + }; + + pwm0: pwm@80910000 { + compatible = "cirrus,ep9301-pwm"; + reg = <0x80910000 0x10>; + clocks = <&syscon EP93XX_CLK_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@80910020 { + compatible = "cirrus,ep9301-pwm"; + reg = <0x80910020 0x10>; + clocks = <&syscon EP93XX_CLK_PWM>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_default_pins>; + status = "disabled"; + }; + + rtc0: rtc@80920000 { + compatible = "cirrus,ep9301-rtc"; + reg = <0x80920000 0x100>; + }; + + spi0: spi@808a0000 { + compatible = "cirrus,ep9301-spi"; + reg = <0x808a0000 0x18>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&vic1>; + interrupts = <21>; + clocks = <&syscon EP93XX_CLK_SPI>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_default_pins>; + status = "disabled"; + }; + + timer: timer@80810000 { + compatible = "cirrus,ep9301-timer"; + reg = <0x80810000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <19>; + }; + + uart0: serial@808c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x808c0000 0x1000>; + arm,primecell-periphid = <0x00041010>; + clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>; + clock-names = "uartclk", "apb_pclk"; + interrupt-parent = <&vic1>; + interrupts = <20>; + status = "disabled"; + }; + + uart1: uart@808d0000 { + compatible = "arm,primecell"; + reg = <0x808d0000 0x1000>; + arm,primecell-periphid = <0x00041010>; + clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>; + clock-names = "apb:uart2", "apb_pclk"; + interrupt-parent = <&vic1>; + interrupts = <22>; + status = "disabled"; + }; + + uart2: uart@808b0000 { + compatible = "arm,primecell"; + reg = <0x808b0000 0x1000>; + arm,primecell-periphid = <0x00041010>; + clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>; + clock-names = "apb:uart3", "apb_pclk"; + interrupt-parent = <&vic1>; + interrupts = <23>; + status = "disabled"; + }; + + usb0: usb@80020000 { + compatible = "generic-ohci"; + reg = <0x80020000 0x10000>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clocks = <&syscon EP93XX_CLK_USB>; + status = "disabled"; + }; + + watchdog0: watchdog@80940000 { + compatible = "cirrus,ep9301-wdt"; + reg = <0x80940000 0x08>; + }; + }; + + xtali: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <14745600>; + clock-output-names = "xtali"; + }; +}; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts index 2eec5f63d399..2f7c34c649ea 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts @@ -90,11 +90,18 @@ timeout-ms = <5000>; }; - gpio-beeper { - compatible = "gpio-beeper"; + gpio_pwm: pwm { + #pwm-cells = <3>; + compatible = "pwm-gpio"; gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; }; + beeper { + compatible = "pwm-beeper"; + pwms = <&gpio_pwm 0 1 0>; + beeper-hz = <1000>; + }; + soc { bus@c4000000 { /* The first 16MB region at CS0 on the expansion bus */ diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts index 19d56e9aec9d..a351a97d257e 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts @@ -8,6 +8,7 @@ #include "intel-ixp42x.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> / { model = "Netgear WG302 v1"; @@ -32,6 +33,35 @@ serial0 = &uart1; }; + leds { + compatible = "gpio-leds"; + test_led: led-test { + color = <LED_COLOR_ID_AMBER>; + function = "test"; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + wlan_led: led-wlan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tx"; + }; + }; + + gpio_keys { + /* RESET is on GPIO13 which can't fire interrupts */ + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + button-reset { + linux,code = <KEY_RESTART>; + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + }; + soc { bus@c4000000 { flash@0,0 { @@ -57,7 +87,7 @@ status = "okay"; /* - * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c) + * Taken from WG302 v1 PCI boardfile (wg302v1-pci.c) * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ @@ -70,10 +100,10 @@ <0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */ /* IDSEL 2 */ - <0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */ - <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */ - <0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */ - <0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */ + <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */ + <0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */ + <0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */ + <0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */ }; ethernet@c8009000 { diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi index 51a716c59669..0adeccabd4fe 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi @@ -193,10 +193,10 @@ compatible = "intel,ixp4xx-ethernet"; reg = <0xc800c000 0x1000>; status = "disabled"; - intel,npe = <0>; /* Dummy values that depend on firmware */ queue-rx = <&qmgr 0>; queue-txready = <&qmgr 0>; + intel,npe-handle = <&npe 0>; }; }; }; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi index 6b6e77596ffa..b108265e9bde 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi @@ -440,7 +440,7 @@ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; - reset-names = "stmmaceth", "ahb"; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -460,7 +460,7 @@ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; - reset-names = "stmmaceth", "ahb"; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -480,7 +480,7 @@ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; - reset-names = "stmmaceth", "ahb"; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts index ceaec29770c6..c1e1264bcb09 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts @@ -50,8 +50,6 @@ stmpe1: stmpe811@41 { compatible = "st,stmpe811"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts index d37a982e8571..97622febc44e 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts @@ -151,12 +151,6 @@ &spi0 { status = "okay"; - - spidev@0 { - compatible = "rohm,dh2228fv"; - reg = <0>; - spi-max-frequency = <1000000>; - }; }; &usb1 { diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts index 65f390bf8975..170c1ae441a6 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts @@ -130,12 +130,12 @@ #gpio-cells = <2>; }; - temp: lm75@48 { - compatible = "lm75"; + temp: temperature-sensor@48 { + compatible = "national,lm75"; reg = <0x48>; }; - at24@50 { + eeprom@50 { compatible = "atmel,24c01"; pagesize = <8>; reg = <0x50>; @@ -211,7 +211,7 @@ status = "okay"; clock-frequency = <100000>; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; pagesize = <8>; reg = <0x50>; diff --git a/arch/arm/boot/dts/marvell/armada-370-xp.dtsi b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi index 0b8c2a64b36f..954c891e5aee 100644 --- a/arch/arm/boot/dts/marvell/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi @@ -168,7 +168,6 @@ mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; }; diff --git a/arch/arm/boot/dts/marvell/armada-375.dtsi b/arch/arm/boot/dts/marvell/armada-375.dtsi index ddc49547d786..99778b4b7e7b 100644 --- a/arch/arm/boot/dts/marvell/armada-375.dtsi +++ b/arch/arm/boot/dts/marvell/armada-375.dtsi @@ -376,7 +376,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts index 5a9ab8410b7b..2fb7304039be 100644 --- a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts +++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts @@ -43,6 +43,17 @@ }; }; }; + + led-7seg { + compatible = "gpio-7-segment"; + segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 1 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 2 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 3 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 4 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 5 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 6 GPIO_ACTIVE_LOW>; + }; }; &pciec { @@ -149,7 +160,7 @@ #size-cells = <0>; reg = <3>; - gpio@20 { + led_7seg_gpio: gpio@20 { compatible = "nxp,pca9554"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi index f3a3cb6ac311..7aa71a9aa1bb 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi @@ -423,14 +423,14 @@ status = "okay"; /* U26 temperature sensor placed near SoC */ - temp1: nct75@4c { - compatible = "lm75"; + temp1: temperature-sensor@4c { + compatible = "ti,tmp75c"; reg = <0x4c>; }; /* U27 temperature sensor placed near RTC battery */ - temp2: nct75@4d { - compatible = "lm75"; + temp2: temperature-sensor@4d { + compatible = "ti,tmp75c"; reg = <0x4d>; }; @@ -453,7 +453,7 @@ pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>; pinctrl-names = "default"; - wifi-disable { + wifi-disable-hog { gpio-hog; gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>; output-low; @@ -465,7 +465,7 @@ pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>; pinctrl-names = "default"; - lte-disable { + lte-disable-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_LOW>; output-low; @@ -476,14 +476,14 @@ * This signal, when asserted, isolates Armada 38x sample at reset pins * from control of external devices. Should be de-asserted after reset. */ - sar-isolation { + sar-isolation-hog { gpio-hog; gpios = <15 GPIO_ACTIVE_LOW>; output-low; line-name = "sar-isolation"; }; - poe-reset { + poe-reset-hog { gpio-hog; gpios = <16 GPIO_ACTIVE_LOW>; output-low; diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 7b755bb4e4e7..83fe00abd652 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -112,6 +112,19 @@ status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + + front-button { + label = "Front Button"; + linux,code = <KEY_VENDOR>; + linux,can-disable; + gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>; + /* debouncing is done by the microcontroller */ + debounce-interval = <0>; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF"; @@ -218,11 +231,27 @@ #size-cells = <0>; reg = <0>; - /* STM32F0 command interface at address 0x2a */ + mcu: system-controller@2a { + compatible = "cznic,turris-omnia-mcu"; + reg = <0x2a>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcu_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_NONE>; + + gpio-controller; + #gpio-cells = <3>; + + interrupt-controller; + #interrupt-cells = <2>; + }; led-controller@2b { compatible = "cznic,turris-omnia-leds"; reg = <0x2b>; + interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>; #address-cells = <1>; #size-cells = <0>; status = "okay"; @@ -501,6 +530,11 @@ }; &pinctrl { + mcu_pins: mcu-pins { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pcawan_pins: pcawan-pins { marvell,pins = "mpp46"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts index f7daa3bc707e..cf32ba9b4e8e 100644 --- a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts +++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts @@ -34,7 +34,7 @@ }; &gpio0 { - phy1_reset { + phy1-reset-hog { gpio-hog; gpios = <19 GPIO_ACTIVE_LOW>; output-low; diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi index 446861b6b17b..1181b13deabc 100644 --- a/arch/arm/boot/dts/marvell/armada-38x.dtsi +++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi @@ -408,7 +408,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi index 9d1cac49c022..6d05835efb42 100644 --- a/arch/arm/boot/dts/marvell/armada-39x.dtsi +++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi @@ -268,7 +268,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts index 07fbfca444d5..36b90c632fd6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts @@ -35,13 +35,13 @@ gpio_keys { compatible = "gpio-keys"; - reset { + button-reset { label = "Reset"; linux,code = <KEY_POWER>; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - button { + button-power { label = "Power"; linux,code = <KEY_SLEEP>; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; @@ -51,7 +51,7 @@ gpio-leds { compatible = "gpio-leds"; - blue-power { + led-blue-power { label = "nas220:blue:power"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts index f59ff7578dfc..7e3ee64d4bdf 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts @@ -29,25 +29,25 @@ pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; - usb1 { + button-usb1 { label = "USB1 Button"; linux,code = <BTN_0>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - usb2 { + button-usb2 { label = "USB2 Button"; linux,code = <BTN_1>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts index 448b0cd23b5f..151edcd140a0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts @@ -58,10 +58,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + key-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; @@ -71,11 +69,11 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "cloudbox:red:fail"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; - blue-sata { + led-blue-sata { label = "cloudbox:blue:sata"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts index bd3b266dd766..fcce8730d3e3 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts @@ -37,7 +37,7 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "d2net_v2:red:fail"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts index 0c0851cd9bec..2f6793f794cd 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts @@ -137,38 +137,38 @@ gpio-leds { compatible = "gpio-leds"; - blue-usb { + led-blue-usb { label = "dir665:blue:usb"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - blue-internet { + led-blue-internet { /* Can only be turned on if the Internet * Ethernet port has Link */ label = "dir665:blue:internet"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - amber-internet { + led-amber-internet { label = "dir665:amber:internet"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - blue-wifi5g { + led-blue-wifi5g { label = "dir665:blue:5g"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; - blue-status { + led-blue-status { label = "dir665:blue:status"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - blue-wps { + led-blue-wps { label = "dir665:blue:wps"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - amber-status { + led-amber-status { label = "dir665:amber:status"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; - blue-24g { + led-blue-24g { label = "dir665:blue:24g"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; @@ -176,15 +176,13 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts index d6b0f418fd01..d8279e0c4c4f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts @@ -24,24 +24,24 @@ &pmx_led_white_usb>; pinctrl-names = "default"; - blue-power { + led-blue-power { label = "dns320:blue:power"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - blue-usb { + led-blue-usb { label = "dns320:blue:usb"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - orange-l_hdd { + led-orange-l_hdd { label = "dns320:orange:l_hdd"; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - orange-r_hdd { + led-orange-r_hdd { label = "dns320:orange:r_hdd"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; - orange-usb { + led-orange-usb { label = "dns320:orange:usb"; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */ }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts index 94d9c06cbbf5..7f396195e977 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts @@ -24,24 +24,24 @@ &pmx_led_white_usb>; pinctrl-names = "default"; - white-power { + led-white-power { label = "dns325:white:power"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - white-usb { + led-white-usb { label = "dns325:white:usb"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ }; - red-l_hdd { + led-red-l_hdd { label = "dns325:red:l_hdd"; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - red-r_hdd { + led-red-r_hdd { label = "dns325:red:r_hdd"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; - red-usb { + led-red-usb { label = "dns325:red:usb"; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi index 0738eb679fcd..20bcd031f3f5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi @@ -8,23 +8,21 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power &pmx_button_unmount &pmx_button_reset>; pinctrl-names = "default"; - power { + button-power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB unmount button"; linux,code = <KEY_EJECTCD>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts index 264938dfa4d9..090f1e2e5bb6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts @@ -42,12 +42,12 @@ pinctrl-0 = <&pmx_led_green &pmx_led_orange>; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "status:orange:fault"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts index 328516351e84..590bee3c561c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts @@ -85,15 +85,15 @@ &pmx_led_wifi_ap >; pinctrl-names = "default"; - bluetooth { + led-bluetooth { label = "dreamplug:blue:bluetooth"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wifi { + led-wifi { label = "dreamplug:green:wifi"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; - wifi-ap { + led-wifi-ap { label = "dreamplug:green:wifi_ap"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts index d4cb3cd3e2a2..d5ac4e3974da 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts @@ -85,44 +85,44 @@ >; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "status:orange:fault"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - left0 { + led-left0 { label = "status:white:left0"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - left1 { + led-left1 { label = "status:white:left1"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - left2 { + led-left2 { label = "status:white:left2"; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - left3 { + led-left3 { label = "status:white:left3"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - right0 { + led-right0 { label = "status:white:right0"; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; - right1 { + led-right1 { label = "status:white:right1"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - right2 { + led-right2 { label = "status:white:right2"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; - right3 { + led-right3 { label = "status:white:right3"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts index dfb41393941d..d5aa8b505cc0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts @@ -59,19 +59,19 @@ &pmx_led_wmode_r &pmx_led_wmode_g >; pinctrl-names = "default"; - health-r { + led-health-r { label = "guruplug:red:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - health-g { + led-health-g { label = "guruplug:green:health"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wmode-r { + led-wmode-r { label = "guruplug:red:wmode"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; - wmode-g { + led-wmode-g { label = "guruplug:green:wmode"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts index 962a910a6f5c..018c6b8f3e8a 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts @@ -58,17 +58,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; @@ -81,16 +79,16 @@ &pmx_led_usb_transfer>; pinctrl-names = "default"; - green-os { + led-green-os { label = "ib62x0:green:os"; gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - red-os { + led-red-os { label = "ib62x0:red:os"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; }; - usb-copy { + led-usb-copy { label = "ib62x0:red:usb_copy"; gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts index aed20185fd7a..91b46e77e0b6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts @@ -89,32 +89,32 @@ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - power-blue { + led-power-blue { label = "power:blue"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - power-red { + led-power-red { label = "power:red"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - usb1 { + led-usb1 { label = "usb1:blue"; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - usb2 { + led-usb2 { label = "usb2:blue"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - usb3 { + led-usb3 { label = "usb3:blue"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - usb4 { + led-usb4 { label = "usb4:blue"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - otb { + led-otb { label = "otb:blue"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; @@ -122,18 +122,16 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; pinctrl-names = "default"; - otb { + button-otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts index 2338f495d517..039362152650 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts @@ -127,44 +127,42 @@ &pmx_led_rebuild &pmx_led_health >; pinctrl-names = "default"; - power_led { + led-power-led { label = "status:white:power_led"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - rebuild_led { + led-rebuild-led { label = "status:white:rebuild_led"; gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; - health_led { + led-health-led { label = "status:red:health_led"; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; - backup_led { + led-backup-led { label = "status:blue:backup_led"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_reset &pmx_button_power &pmx_button_otb>; pinctrl-names = "default"; - Power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; - Reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; - OTB { + button-otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts index c841eb8e7fb1..974bc9de4702 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts @@ -97,52 +97,52 @@ leds { compatible = "gpio-leds"; - status_green { + led-status-green { label = "l-50:green:status"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - status_red { + led-status-red { label = "l-50:red:status"; gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; }; - wifi { + led-wifi { label = "l-50:green:wifi"; gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; - internet_green { + led-internet-green { label = "l-50:green:internet"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; }; - internet_red { + led-internet-red { label = "l-50:red:internet"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; - usb1_green { + led-usb1-green { label = "l-50:green:usb1"; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "usbport"; trigger-sources = <&hub_port3>; }; - usb1_red { + led-usb1-red { label = "l-50:red:usb1"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; }; - usb2_green { + led-usb2-green { label = "l-50:green:usb2"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "usbport"; trigger-sources = <&hub_port1>; }; - usb2_red { + led-usb2-red { label = "l-50:red:usb2"; gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; @@ -193,7 +193,7 @@ keys { compatible = "gpio-keys"; - factory_defaults { + button-factory-defaults { label = "factory_defaults"; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts index 8c2b540eaf4f..90ea6cdee8e0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts @@ -51,7 +51,7 @@ gpio_keys { compatible = "gpio-keys"; - power { + button-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -61,11 +61,11 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "laplug_v2:red:power"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - blue-power { + led-blue-power { label = "laplug_v2:blue:power"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi index b54c9980f636..8a11d2b9d449 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi @@ -88,8 +88,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_function &pmx_power_switch &pmx_power_auto_switch>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts index 27fd6e2337d5..8a1c38ab6111 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts @@ -33,18 +33,16 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; pinctrl-names = "default"; - wps { + button-wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; @@ -56,12 +54,12 @@ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; pinctrl-names = "default"; - white-health { + led-white-health { label = "viper:white:health"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; - white-pulse { + led-white-pulse { label = "viper:white:pulse"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi index f80af24b9e90..5e0b139dd4fb 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi @@ -107,24 +107,22 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_function &pmx_power_switch &pmx_power_auto_switch>; pinctrl-names = "default"; - option { + button-option { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - reserved { + button-reserved { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - power { + button-power { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; @@ -139,28 +137,28 @@ &pmx_led_function_blue>; pinctrl-names = "default"; - func_blue { + led-func-blue { label = "lsxl:blue:func"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - alarm { + led-alarm { label = "lsxl:red:alarm"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - info { + led-info { label = "lsxl:amber:info"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "lsxl:blue:power"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - func_red { + led-func-red { label = "lsxl:red:func"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts index e87ea7146546..6533b49a15b2 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts @@ -114,36 +114,36 @@ >; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; - user1o { + led-user1o { label = "user1:orange"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user1g { + led-user1g { label = "user1:green"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user0o { + led-user0o { label = "user0:orange"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user0g { + led-user0g { label = "user0:green"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; - misc { + led-misc { label = "status:orange:misc"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts index 5a77286136c7..e3b41784c876 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts @@ -73,17 +73,17 @@ pinctrl-0 = <&pmx_leds &pmx_usb_led>; pinctrl-names = "default"; - green-status { + led-green-status { label = "gtw:green:Status"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; }; - red-status { + led-red-status { label = "gtw:red:Status"; gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "gtw:green:USB"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; @@ -91,17 +91,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_keys>; pinctrl-names = "default"; - restart { + button-restart { label = "SWR Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi index b5737026e244..d4edf2727388 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi @@ -53,26 +53,24 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; /* * esc and power represent a three position rocker * switch. Thus the conventional KEY_POWER does not fit */ - exc { + button-exc { label = "Back power switch (on|auto)"; linux,code = <KEY_ESC>; linux,input-type = <5>; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - power { + button-power { label = "Back power switch (auto|off)"; linux,code = <KEY_1>; linux,input-type = <5>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - option { + button-option { label = "Function button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi index 51530ea86622..d6b615cf6390 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi @@ -55,10 +55,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -68,7 +66,7 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "ns2:red:fail"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts index b0cb5907ed63..686bcd6f0f3c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts @@ -24,7 +24,7 @@ gpio-leds { compatible = "gpio-leds"; - blue-sata { + led-blue-sata { label = "ns2:blue:sata"; gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; linux,default-trigger = "disk-activity"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts index c1799a07816e..3555ac1c3b15 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts @@ -87,43 +87,43 @@ &pmx_led_hdd_green &pmx_led_hdd_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa310:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - red-sys { + led-red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd { + led-green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd { + led-red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-esata { + led-green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-esata { + led-red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - red-usb { + led-red-usb { label = "nsa310:red:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts index b85e314f045a..ddf84092aade 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts @@ -75,39 +75,39 @@ gpio-leds { compatible = "gpio-leds"; - green-sys { + led-green-sys { label = "nsa310:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - red-sys { + led-red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd { + led-green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd { + led-red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-esata { + led-green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-esata { + led-red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts index 49da633a1bc0..47deb93c90a5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts @@ -35,24 +35,22 @@ keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; }; - copy { + button-copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts index 652405e65006..dd5c8ffc8781 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts @@ -142,39 +142,39 @@ &pmx_led_hdd1_green &pmx_led_hdd1_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa320:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - orange-sys { + led-orange-sys { label = "nsa320:orange:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd1 { + led-green-hdd1 { label = "nsa320:green:hdd1"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd1 { + led-red-hdd1 { label = "nsa320:red:hdd1"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-hdd2 { + led-green-hdd2 { label = "nsa320:green:hdd2"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-hdd2 { + led-red-hdd2 { label = "nsa320:red:hdd2"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa320:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa320:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa320:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts index 371456de34b2..f0786a5f2ce6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts @@ -162,39 +162,39 @@ &pmx_led_hdd1_green &pmx_led_hdd1_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa325:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - orange-sys { + led-orange-sys { label = "nsa325:orange:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd1 { + led-green-hdd1 { label = "nsa325:green:hdd1"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd1 { + led-red-hdd1 { label = "nsa325:red:hdd1"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-hdd2 { + led-green-hdd2 { label = "nsa325:green:hdd2"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-hdd2 { + led-red-hdd2 { label = "nsa325:red:hdd2"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa325:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa325:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa325:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi index ea3d36512e9f..e9bd9c551af5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi @@ -63,22 +63,20 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - copy { + button-copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts index 8ea430168ea5..20c6290d2037 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts @@ -115,10 +115,8 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_gpio_init>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts index 946f0f453dd1..2bc4b68bd723 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts @@ -44,7 +44,7 @@ i2c@11100 { status = "okay"; - s24c02: s24c02@50 { + s24c02: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; @@ -136,8 +136,6 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_gpio_init>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; button { label = "Init Button"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi index 47f03c69c55a..9d7cff4feada 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi @@ -53,7 +53,7 @@ cd-gpios = <&gpio0 29 9>; }; gpio@10100 { - p28 { + p28-hog { gpio-hog; gpios = <28 GPIO_ACTIVE_HIGH>; /* @@ -71,7 +71,7 @@ }; }; gpio@10140 { - p2 { + p2-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; /* diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts index f9e95e55f36d..39a5345332da 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts @@ -33,12 +33,12 @@ gpio-leds { compatible = "gpio-leds"; - health { + led-health { label = "pogo_e02:green:health"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "pogo_e02:orange:fault"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts index 5aa4669ae254..0e9c4cf79822 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts @@ -29,12 +29,10 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_eject>; pinctrl-names = "default"; - eject { + button-eject { debounce-interval = <50>; wakeup-source; linux,code = <KEY_EJECTCD>; @@ -48,12 +46,12 @@ pinctrl-0 = <&pmx_led_green &pmx_led_red>; pinctrl-names = "default"; - health { + led-health { label = "pogoplugv4:green:health"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; default-state = "on"; }; - fault { + led-fault { label = "pogoplugv4:red:fault"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts index ae8f493c9a0f..eb185273376e 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&pmx_led_blue>; pinctrl-names = "default"; - health { + led-health { label = "sheevaplug:blue:health"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts index c73cc904e5c4..ce73fcf2255f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts @@ -28,13 +28,13 @@ pinctrl-0 = <&pmx_led_blue &pmx_led_red>; pinctrl-names = "default"; - health { + led-health { label = "sheevaplug:blue:health"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - misc { + led-misc { label = "sheevaplug:red:misc"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi index 20964eb48fd7..6b7c5218b1fb 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi @@ -410,7 +410,7 @@ pinctrl-0 = <&pmx_alarmled_12>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:alarm"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; @@ -424,42 +424,42 @@ &pmx_hddled_26 &pmx_hddled_27>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; - hdd3-green { + led-hdd3-green { label = "synology:green:hdd3"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - hdd3-amber { + led-hdd3-amber { label = "synology:amber:hdd3"; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; - hdd4-green { + led-hdd4-green { label = "synology:green:hdd4"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; }; - hdd4-amber { + led-hdd4-amber { label = "synology:amber:hdd4"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; @@ -471,12 +471,12 @@ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; @@ -488,22 +488,22 @@ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; @@ -518,52 +518,52 @@ &pmx_hddled_45>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; - hdd3-green { + led-hdd3-green { label = "synology:green:hdd3"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; - hdd3-amber { + led-hdd3-amber { label = "synology:amber:hdd3"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - hdd4-green { + led-hdd4-green { label = "synology:green:hdd4"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - hdd4-amber { + led-hdd4-amber { label = "synology:amber:hdd4"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - hdd5-green { + led-hdd5-green { label = "synology:green:hdd5"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; - hdd5-amber { + led-hdd5-amber { label = "synology:amber:hdd5"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; @@ -575,22 +575,22 @@ pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts index ad093324e075..a6e77a487d00 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts @@ -156,12 +156,10 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts index 30892c19aceb..a2e0ad4b84d8 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts @@ -35,17 +35,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts index aba1205981f1..35be6bce1dba 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts @@ -35,17 +35,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi index 717236853e45..f136059607b7 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi @@ -36,17 +36,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts index 55ea87870af3..86c425b72fa7 100644 --- a/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts @@ -113,8 +113,8 @@ "Headphones", "HPOR", "MIC2", "Mic Jack"; widgets = "Headphone", "Headphones", "Microphone", "Mic Jack"; - hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>; - mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>; + hp-det-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + mic-det-gpios = <&gpio 96 GPIO_ACTIVE_HIGH>; }; soc { diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi index c2d87ba6190a..055ac754c5fd 100644 --- a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi +++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi @@ -48,8 +48,6 @@ / { gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_power_switch>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts index 03471d30bfd9..12a4aac2633e 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts @@ -35,22 +35,21 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - front_button { + + button-front { label = "Front Push Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; - power_rocker_sw_on { + switch-power-rocker-sw-on { label = "Power rocker switch (on|auto)"; linux,input-type = <5>; /* EV_SW */ linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; - power_rocker_sw_off { + switch-power-rocker-sw-off { label = "Power rocker switch (auto|off)"; linux,input-type = <5>; /* EV_SW */ linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts index f17e25ac98dd..f81acb9b7223 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -39,9 +39,8 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_power_button>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - button@1 { + + button-1 { label = "Power-on Switch"; linux,code = <KEY_POWER>; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; @@ -53,7 +52,7 @@ pinctrl-0 = <&pmx_power_led>; pinctrl-names = "default"; - led@1 { + led-1 { label = "power:blue"; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts index ee751995c8d0..79fee048c900 100644 --- a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts +++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts @@ -61,7 +61,7 @@ }; gpio_keys { - func { + func-button { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; @@ -90,7 +90,7 @@ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; - func { + func-led { label = "lschl:func:blue:top"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts index 2fbc17d6dfa4..e0da406c430f 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts @@ -74,22 +74,21 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - func { + + key-func { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - power { + key-power { label = "Power-on Switch"; linux,input-type = <5>; /* EV_SW */ linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; - autopower { + key-autopower { label = "Power-auto Switch"; linux,input-type = <5>; /* EV_SW */ linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */ @@ -103,24 +102,24 @@ &pmx_led_power>; pinctrl-names = "default"; - alarm { + led-alarm { label = "lswsgl:alarm:red"; - gpio = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; - info { + led-info { label = "lswsgl:info:amber"; - gpio = <&gpio0 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; - func { + led-func { label = "lswsgl:func:blue:top"; - gpio = <&gpio0 9 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "lswsgl:power:blue:bottom"; - gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts index d57859998350..cb1bd24b7ae3 100644 --- a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts +++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts @@ -35,15 +35,14 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - power { + + key-power { label = "Power"; linux,code = <KEY_POWER>; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; - reset { + key-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts index fb203e7d37f5..d63ea15539aa 100644 --- a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts @@ -35,7 +35,7 @@ pinctrl-0 = <&pmx_reset_button>; pinctrl-names = "default"; - reset { + key-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts index fd78aa02a3c5..75ab913b21e5 100644 --- a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts +++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts @@ -32,7 +32,7 @@ pinctrl-0 = <&pmx_debug_led>; pinctrl-names = "default"; - led@0 { + led-0 { label = "rd88f5182:cpu"; linux,default-trigger = "heartbeat"; gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/mediatek/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts index 9c7325f18933..4c76366aa938 100644 --- a/arch/arm/boot/dts/mediatek/mt2701-evb.dts +++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts @@ -231,7 +231,7 @@ <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>, <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>, <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi index f0b4a09004b3..fd7a89cc337d 100644 --- a/arch/arm/boot/dts/mediatek/mt7623.dtsi +++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi @@ -308,7 +308,7 @@ clock-names = "spi", "wrap"; }; - cir: cir@10013000 { + cir: ir-receiver@10013000 { compatible = "mediatek,mt7623-cir"; reg = <0 0x10013000 0 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; @@ -1143,13 +1143,13 @@ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-clk { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-down = <MTK_PUPD_SET_R1R0_01>; }; @@ -1167,14 +1167,14 @@ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; bias-pull-down; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; }; pins-wp { @@ -1197,13 +1197,13 @@ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; }; @@ -1211,7 +1211,7 @@ nand_pins_default: nanddefault { pins-ale { pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -1226,13 +1226,13 @@ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>, <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up; }; pins-we { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; }; diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile index 0c45c8d17468..79cd38fdc7da 100644 --- a/arch/arm/boot/dts/microchip/Makefile +++ b/arch/arm/boot/dts/microchip/Makefile @@ -2,6 +2,7 @@ # Enables support for device-tree overlays DTC_FLAGS_at91-sam9x60_curiosity := -@ DTC_FLAGS_at91-sam9x60ek := -@ +DTC_FLAGS_at91-sam9x75_curiosity := -@ DTC_FLAGS_at91-sama5d27_som1_ek := -@ DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ DTC_FLAGS_at91-sama5d29_curiosity := -@ @@ -11,6 +12,7 @@ DTC_FLAGS_at91-sama5d2_xplained := -@ DTC_FLAGS_at91-sama5d3_eds := -@ DTC_FLAGS_at91-sama5d3_xplained := -@ DTC_FLAGS_at91-sama5d4_xplained := -@ +DTC_FLAGS_at91-sama7d65_curiosity := -@ DTC_FLAGS_at91-sama7g54_curiosity := -@ DTC_FLAGS_at91-sama7g5ek := -@ dtb-$(CONFIG_SOC_AT91RM9200) += \ @@ -60,6 +62,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ dtb-$(CONFIG_SOC_SAM9X60) += \ at91-sam9x60_curiosity.dtb \ at91-sam9x60ek.dtb +dtb-$(CONFIG_SOC_SAM9X7) += \ + at91-sam9x75_curiosity.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2-2.dtb \ at91-kizbox3-hs.dtb \ @@ -87,6 +91,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb \ at91-vinco.dtb +dtb-$(CONFIG_SOC_SAMA7D65) += \ + at91-sama7d65_curiosity.dtb dtb-$(CONFIG_SOC_SAMA7G5) += \ at91-sama7g54_curiosity.dtb \ at91-sama7g5ek.dtb diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts index 742fcf525e1b..302cb872efa1 100644 --- a/arch/arm/boot/dts/microchip/aks-cdu.dts +++ b/arch/arm/boot/dts/microchip/aks-cdu.dts @@ -56,7 +56,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -98,23 +98,27 @@ leds { compatible = "gpio-leds"; - red { + led-red { + label = "red"; gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; - green { + led-green { + label = "green"; gpios = <&pioA 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; - yellow { + led-yellow { + label = "yellow"; gpios = <&pioB 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - blue { + led-blue { + label = "blue"; gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts index 29936bfbeeb7..c11f4f7dac94 100644 --- a/arch/arm/boot/dts/microchip/animeo_ip.dts +++ b/arch/arm/boot/dts/microchip/animeo_ip.dts @@ -136,7 +136,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; @@ -146,23 +146,23 @@ leds { compatible = "gpio-leds"; - power_green { + led-power-green { label = "power_green"; gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - power_red { + led-power-red { label = "power_red"; gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; }; - tx_green { + led-tx-green { label = "tx_green"; gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; }; - tx_red { + led-tx-red { label = "tx_red"; gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/microchip/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts index 9dfd5de808d1..8e9e87665045 100644 --- a/arch/arm/boot/dts/microchip/at91-foxg20.dts +++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts @@ -131,7 +131,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi index e5e21dff882f..a44d92305dbb 100644 --- a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi @@ -85,7 +85,7 @@ &i2c1 { status = "okay"; - pmic: act8865@5b { + act8865: pmic@5b { compatible = "active-semi,act8865"; reg = <0x5b>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts index 5ccb3c139592..892dbd8dbbed 100644 --- a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts @@ -114,7 +114,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts index 2fb51b9aca2a..49dc1a4ccb36 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts @@ -105,7 +105,7 @@ status = "okay"; }; - usb0: ohci@500000 { + usb0: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts index c6fbdd29019f..b9ffd9e5faac 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts @@ -198,8 +198,6 @@ dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index f3cbb675cea4..cdc56b53299d 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -53,17 +53,17 @@ pinctrl-0 = <&pinctrl_gpio_leds>; status = "okay"; /* Conflict with pwm0. */ - red { + led-red { label = "red"; gpios = <&pioB 11 GPIO_ACTIVE_HIGH>; }; - green { + led-green { label = "green"; gpios = <&pioB 12 GPIO_ACTIVE_HIGH>; }; - blue { + led-blue { label = "blue"; gpios = <&pioB 13 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -207,8 +207,6 @@ status = "okay"; i2c0: i2c@600 { - #address-cells = <1>; - #size-cells = <0>; dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; @@ -254,8 +252,6 @@ status = "okay"; i2c6: i2c@600 { - #address-cells = <1>; - #size-cells = <0>; dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx6_default>; @@ -264,6 +260,37 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; + power-monitor@17 { + compatible = "microchip,pac1934"; + reg = <0x17>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIOM"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3_MPU"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3"; + }; + }; + gpio_exp: mcp23008@20 { compatible = "microchip,mcp23008"; reg = <0x20>; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts new file mode 100644 index 000000000000..1a6a909a5043 --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> + */ +/dts-v1/; +#include "sam9x7.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Microchip SAM9X75 Curiosity"; + compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9"; + + aliases { + i2c0 = &i2c6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button-user { + label = "USER"; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_0>; + wakeup-source; + }; + }; + + led-controller { + compatible = "gpio-leds"; + + led_red: led-red { + label = "red"; + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_red_led_gpio_default>; + }; + + led_green: led-green { + label = "green"; + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_green_led_gpio_default>; + }; + + led_blue: led-blue { + label = "blue"; + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_blue_led_gpio_default>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x10000000>; + device_type = "memory"; + }; +}; + +&classd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; +}; + +&dbgu { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu_default>; + status = "okay"; +}; + +&dma0 { + status = "okay"; +}; + +&flx6 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx6_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + pmic@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + vddioddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + vddcore: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + dcdc4: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-ramp-delay = <3125>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + vldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + }; + + vldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-standby { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&flx7 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&i2c7 { + dmas = <0>, <0>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx7_default>; + status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "DCDC4"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIODDR"; + }; + }; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&main_xtal { + clock-frequency = <24000000>; +}; + +&pinctrl { + classd { + pinctrl_classd_default: classd-default { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>; + }; + }; + + dbgu { + pinctrl_dbgu_default: dbgu-default { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + flexcom { + pinctrl_flx6_default: flx6-default { + atmel,pins = + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_flx7_default: flx7-default { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; + }; + }; + + gpio-keys { + pinctrl_key_gpio_default: key-gpio-default { + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + i2s { + pinctrl_i2s_default: i2s-default { + atmel,pins = + <AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SCK */ + <AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SWS */ + <AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDIN */ + <AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDOUT */ + <AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>; /* I2SMCK */ + }; + }; + + led-controller { + pinctrl_red_led_gpio_default: red-led-gpio-default { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_green_led_gpio_default: green-led-gpio-default { + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_blue_led_gpio_default: blue-led-gpio-default { + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + sdmmc0 { + pinctrl_sdmmc0_default: sdmmc0-default { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA2 CK periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA1 CMD periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA0 DAT0 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA3 DAT1 periph A with pullup */ + <AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA4 DAT2 periph A with pullup */ + <AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA5 DAT3 periph A with pullup */ + }; + }; +}; /* pinctrl */ + +&poweroff { + debounce-delay-us = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&rtt { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + disable-wp; + status = "okay"; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&tcb { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&trng { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi index 95ecb7d040a8..8ac85dac5a96 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi @@ -106,7 +106,7 @@ scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <8>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts index f3ffb8f01d8a..45edf6214cf7 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts @@ -37,7 +37,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ &pioA PIN_PA27 GPIO_ACTIVE_HIGH @@ -48,7 +48,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi index 4617805c7748..ef11606a82b3 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi @@ -31,6 +31,14 @@ }; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-wilc1000"; reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; @@ -67,9 +75,14 @@ scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - mcp16502@5b { + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts index 15239834d886..35a933eec573 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -197,6 +197,7 @@ &sdmmc0 { bus-width = <4>; + no-1-8-v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts index 6b02b7bcfd49..7be215781549 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts @@ -84,6 +84,14 @@ device_type = "memory"; reg = <0x20000000 0x20000000>; }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -141,9 +149,14 @@ i2c-sda-hold-time-ns = <350>; status = "okay"; - mcp16502@5b { + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; @@ -501,6 +514,7 @@ &sdmmc0 { bus-width = <4>; + no-1-8-v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; disable-wp; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts index 999adeca6f33..9fa6f1395aa6 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts @@ -78,6 +78,14 @@ linux,default-trigger = "heartbeat"; }; }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_MAIN_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -187,9 +195,45 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; - mcp16502@5b { + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3_1"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3_2"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIODDR"; + }; + }; + + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts index 200b20515ab1..10d69f6957cf 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts @@ -47,7 +47,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioA PIN_PB12 GPIO_ACTIVE_HIGH @@ -58,7 +58,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; @@ -231,7 +231,7 @@ scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <8>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts index 6680031387e8..7e77a55ed41d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts @@ -46,7 +46,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ &pioA PIN_PB10 GPIO_ACTIVE_HIGH @@ -57,7 +57,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; @@ -411,7 +411,7 @@ scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - at24@54 { + eeprom@54 { compatible = "atmel,24c02"; reg = <0x54>; pagesize = <16>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts index 820033727088..d2c43957497d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts @@ -87,7 +87,7 @@ i2c1: i2c@f0018000 { status = "okay"; - pmic: act8865@5b { + act8865: pmic@5b { compatible = "active-semi,act8865"; reg = <0x5b>; status = "disabled"; @@ -283,7 +283,7 @@ status = "okay"; }; - usb1: ohci@600000 { + usb1: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 3 GPIO_ACTIVE_LOW @@ -294,7 +294,7 @@ status = "okay"; }; - usb2: ehci@700000 { + usb2: usb@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts index 8adf567f2f0f..b9725e400501 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts @@ -22,7 +22,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -31,7 +31,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts index 95d701d13fef..0ecccb9a809d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts @@ -164,7 +164,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_HIGH @@ -175,7 +175,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts index 20ac775059ca..69107d6cd26c 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts @@ -198,7 +198,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ &pioE 11 GPIO_ACTIVE_LOW @@ -207,7 +207,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts new file mode 100644 index 000000000000..30fdc4f55a3b --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board + * + * Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Romain Sioen <romain.sioen@microchip.com> + * + */ +/dts-v1/; +#include "sama7d65-pinfunc.h" +#include "sama7d65.dtsi" +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> + +/ { + model = "Microchip SAMA7D65 Curiosity"; + compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65", + "microchip,sama7d6", "microchip,sama7"; + + aliases { + serial0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; +}; + +&dma0 { + status = "okay"; +}; + +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; +}; + +&flx6 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6_default>; + status = "okay"; +}; + +&flx10 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&i2c10 { + dmas = <0>, <0>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <47000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDIODDR"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCPU"; + }; + }; +}; + +&main_xtal { + clock-frequency = <24000000>; +}; + +&pioa { + pinctrl_i2c10_default: i2c10-default{ + pinmux = <PIN_PB19__FLEXCOM10_IO1>, + <PIN_PB20__FLEXCOM10_IO0>; + bias-pull-up; + }; + + pinctrl_sdmmc1_default: sdmmc1-default { + cmd-data { + pinmux = <PIN_PB22__SDMMC1_CMD>, + <PIN_PB24__SDMMC1_DAT0>, + <PIN_PB25__SDMMC1_DAT1>, + <PIN_PB26__SDMMC1_DAT2>, + <PIN_PB27__SDMMC1_DAT3>; + slew-rate = <0>; + bias-disable; + }; + + ck-cd-rstn-vddsel { + pinmux = <PIN_PB23__SDMMC1_CK>, + <PIN_PB21__SDMMC1_RSTN>, + <PIN_PB30__SDMMC1_1V8SEL>, + <PIN_PB29__SDMMC1_CD>, + <PIN_PB28__SDMMC1_WP>; + slew-rate = <0>; + bias-disable; + }; + }; + + pinctrl_uart6_default: uart6-default { + pinmux = <PIN_PD18__FLEXCOM6_IO0>, + <PIN_PD19__FLEXCOM6_IO1>; + bias-disable; + }; +}; + +&sdmmc1 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; +}; + +&shdwc { + debounce-delay-us = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts index 009d2c832421..2dec2218f32c 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts @@ -72,6 +72,14 @@ device_type = "memory"; reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */ }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -178,6 +186,37 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; + power-monitor@1f { + compatible = "microchip,pac1934"; + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <47000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDIODDR"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCPU"; + }; + }; + eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; @@ -189,6 +228,11 @@ pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; regulators { vdd_3v3: VDD_IO { diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts index 20b2497657ae..2543599013b1 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts @@ -88,6 +88,14 @@ reg = <0x60000000 0x20000000>; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sama7g5ek audio"; @@ -129,6 +137,7 @@ vref-supply = <&vddout25>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; status = "okay"; }; @@ -236,9 +245,45 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; - mcp16502@5b { + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIODDR"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCPU"; + }; + }; + + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; regulators { @@ -403,6 +448,42 @@ i2c-digital-filter; i2c-digital-filter-width-ns = <35>; status = "okay"; + + eeprom0: eeprom@52 { + compatible = "microchip,24aa025e48"; + reg = <0x52>; + size = <256>; + pagesize = <16>; + vcc-supply = <&vdd_3v3>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom0_eui48: eui48@fa { + reg = <0xfa 0x6>; + }; + }; + }; + + eeprom1: eeprom@53 { + compatible = "microchip,24aa025e48"; + reg = <0x53>; + size = <256>; + pagesize = <16>; + vcc-supply = <&vdd_3v3>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom1_eui48: eui48@fa { + reg = <0xfa 0x6>; + }; + }; + }; }; }; @@ -440,6 +521,8 @@ &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; phy-mode = "rgmii-id"; + nvmem-cells = <&eeprom0_eui48>; + nvmem-cell-names = "mac-address"; status = "okay"; ethernet-phy@7 { @@ -457,6 +540,8 @@ &pinctrl_gmac1_mdio_default &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; + nvmem-cells = <&eeprom1_eui48>; + nvmem-cell-names = "mac-address"; status = "okay"; /* Conflict with pdmc0. */ ethernet-phy@0 { diff --git a/arch/arm/boot/dts/microchip/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts index ecbdacf48708..c5fc51667066 100644 --- a/arch/arm/boot/dts/microchip/at91-vinco.dts +++ b/arch/arm/boot/dts/microchip/at91-vinco.dts @@ -162,7 +162,7 @@ status = "disabled"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -171,7 +171,7 @@ status = "disabled"; }; - usb2: ehci@600000 { + usb2: usb@600000 { /* 4G Modem */ status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi index 16c675e3a890..2a4c83d88733 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi +++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi @@ -225,7 +225,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = < @@ -702,7 +702,7 @@ status = "disabled"; }; - usb0: ohci@300000 { + usb0: usb@300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts index 4624a6f076f8..ce691c4692b9 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts +++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts @@ -89,7 +89,7 @@ }; }; - usb0: ohci@300000 { + usb0: usb@300000 { num-ports = <2>; status = "okay"; }; @@ -127,19 +127,19 @@ leds { compatible = "gpio-leds"; - ds2 { + led-ds2 { label = "green"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; - ds4 { + led-ds4 { label = "yellow"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - ds6 { + led-ds6 { label = "red"; gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi index e56d5546554c..ec973f07a961 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi @@ -170,7 +170,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x600>; atmel,mux-mask = < @@ -742,7 +742,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts index 720c15472c4a..8522a210b484 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts @@ -131,7 +131,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -165,7 +165,7 @@ i2c-gpio-0 { status = "okay"; - 24c512@50 { + eeprom@50 { compatible = "atmel,24c512"; reg = <0x50>; }; @@ -174,13 +174,13 @@ leds { compatible = "gpio-leds"; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi index 307b60658014..0b556c234557 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi @@ -77,7 +77,7 @@ #size-cells = <1>; ranges; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; @@ -317,7 +317,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x600>; atmel,mux-mask = diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts index 045cb253f23a..313bc2797fde 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts @@ -31,7 +31,7 @@ }; ahb { - usb0: ohci@500000 { + usb0: usb@500000 { status = "okay"; }; @@ -192,19 +192,19 @@ leds { compatible = "gpio-leds"; - ds8 { + led-ds8 { label = "ds8"; gpios = <&pioA 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - ds7 { + led-ds7 { label = "ds7"; gpios = <&pioA 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioA 23 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi index 75d8ff2d12c8..3e9e5ce7c6c8 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi @@ -167,7 +167,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < @@ -768,7 +768,7 @@ status = "disabled"; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts index ce8baff6a9f4..471ea25296aa 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts @@ -207,7 +207,7 @@ }; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { num-ports = <2>; status = "okay"; atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH @@ -219,13 +219,13 @@ leds { compatible = "gpio-leds"; - d3 { + led-d3 { label = "d3"; gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - d2 { + led-d2 { label = "d2"; gpios = <&pioC 29 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; @@ -253,7 +253,7 @@ i2c-gpio-0 { status = "okay"; - 24c512@50 { + eeprom@50 { compatible = "atmel,24c512"; reg = <0x50>; pagesize = <128>; diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts index 6de7a7cd3c07..1e62fd371ddb 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts @@ -14,13 +14,13 @@ leds { compatible = "gpio-leds"; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts index 172af6ff4b18..3e5eab57d1a5 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts @@ -40,13 +40,13 @@ leds { compatible = "gpio-leds"; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi index 565b99e79c52..84a7287107f8 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi @@ -211,7 +211,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -220,7 +220,7 @@ i2c-gpio-0 { status = "okay"; - 24c512@50 { + eeprom@50 { compatible = "atmel,24c512"; reg = <0x50>; vcc-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts index af70eb8a3a02..e0c1e8df81b1 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts @@ -37,71 +37,71 @@ leds { compatible = "gpio-leds"; - power_blue { + led-power-blue { label = "smartgw:power:blue"; gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - power_green { + led-power-green { label = "smartgw:power:green"; gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - power_red { + led-power-red { label = "smartgw:power:red"; gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_blue { + led-radio-blue { label = "smartgw:radio:blue"; gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_green { + led-radio-green { label = "smartgw:radio:green"; gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_red { + led-radio-red { label = "smartgw:radio:red"; gpios = <&pioC 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_blue { + led-internet-blue { label = "smartgw:internet:blue"; gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_green { + led-internet-green { label = "smartgw:internet:green"; gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_red { + led-internet-red { label = "smartgw:internet:red"; gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - heartbeat { + led-heartbeat { label = "smartgw:heartbeat"; gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - pb18 { + led-pb18 { status = "disabled"; }; - pd21 { + led-pd21 { status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi index 325c63a53118..535e26e05e99 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi @@ -190,7 +190,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < @@ -753,7 +753,7 @@ status = "disabled"; }; - trng@fffcc000 { + trng: rng@fffcc000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfffcc000 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; @@ -964,7 +964,7 @@ status = "disabled"; }; - usb0: ohci@700000 { + usb0: usb@700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -973,7 +973,7 @@ status = "disabled"; }; - usb1: ehci@800000 { + usb1: usb@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts index 071db4f16313..2a31b2f14893 100644 --- a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts @@ -303,14 +303,14 @@ }; }; - usb0: ohci@700000 { + usb0: usb@700000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW &pioD 3 GPIO_ACTIVE_LOW>; }; - usb1: ehci@800000 { + usb1: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi index 8dc04e9031a6..2f930c39ce4d 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi @@ -226,7 +226,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = < @@ -748,7 +748,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts index 4c644d4c6be7..b06a54e8e237 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts @@ -180,7 +180,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <1>; atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; @@ -207,19 +207,19 @@ leds { compatible = "gpio-leds"; - d8 { + led-d8 { label = "d8"; gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; - d9 { + led-d9 { label = "d9"; gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; - d10 { + led-d10 { label = "d10"; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi index 7436b5c862b1..1fec9fcc7cd1 100644 --- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi @@ -339,7 +339,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi index a7456c2191fa..17bdf1e4db01 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi @@ -202,7 +202,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* shared pinctrl settings */ @@ -886,7 +886,7 @@ }; }; - usb0: ohci@600000 { + usb0: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -895,7 +895,7 @@ status = "disabled"; }; - usb1: ehci@700000 { + usb1: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi index cdd37f67280b..fb3c19bdfcb6 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi @@ -120,13 +120,13 @@ leds { compatible = "gpio-leds"; - pb18 { + led-pb18 { label = "pb18"; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - pd21 { + led-pd21 { label = "pd21"; gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/microchip/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts index ad7a0850252a..52ccef31b391 100644 --- a/arch/arm/boot/dts/microchip/ethernut5.dts +++ b/arch/arm/boot/dts/microchip/ethernut5.dts @@ -101,7 +101,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts index 6d519d02d190..40c5111c2f0a 100644 --- a/arch/arm/boot/dts/microchip/evk-pro3.dts +++ b/arch/arm/boot/dts/microchip/evk-pro3.dts @@ -45,7 +45,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts index 005c2758e229..2a97e2c0b894 100644 --- a/arch/arm/boot/dts/microchip/mpa1600.dts +++ b/arch/arm/boot/dts/microchip/mpa1600.dts @@ -57,7 +57,7 @@ }; }; - usb0: ohci@300000 { + usb0: usb@300000 { num-ports = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts index c349fd3758a6..2258e62f5864 100644 --- a/arch/arm/boot/dts/microchip/pm9g45.dts +++ b/arch/arm/boot/dts/microchip/pm9g45.dts @@ -139,12 +139,12 @@ }; }; - usb0: ohci@700000 { + usb0: usb@700000 { status = "okay"; num-ports = <2>; }; - usb1: ehci@800000 { + usb1: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index 291540e5d81e..b075865e6a76 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -88,7 +88,7 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -97,7 +97,7 @@ status = "disabled"; }; - usb2: ehci@700000 { + usb2: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -186,6 +186,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -196,6 +197,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; dmas = <&dma0 @@ -215,6 +218,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -265,6 +270,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; dmas = <&dma0 @@ -284,6 +291,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -384,6 +393,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -394,6 +404,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -433,6 +445,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -443,6 +456,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -478,7 +493,7 @@ clock-names = "sha_clk"; }; - trng: trng@f0030000 { + trng: rng@f0030000 { compatible = "microchip,sam9x60-trng"; reg = <0xf0030000 0x100>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; @@ -590,6 +605,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -600,6 +616,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -639,6 +657,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -649,6 +668,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -688,6 +709,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -698,6 +720,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -737,6 +761,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -747,6 +772,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "spi_clk"; dmas = <&dma0 @@ -766,6 +793,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -805,6 +834,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -815,6 +845,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "spi_clk"; dmas = <&dma0 @@ -834,6 +866,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -873,6 +907,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -883,6 +918,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "spi_clk"; dmas = <&dma0 @@ -902,6 +939,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -941,6 +980,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -951,6 +991,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "spi_clk"; dmas = <&dma0 @@ -970,6 +1012,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1064,6 +1108,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -1074,6 +1119,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1113,6 +1160,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -1123,6 +1171,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1223,7 +1273,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "microchip,sam9x60-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ @@ -1236,7 +1286,7 @@ >; pioA: gpio@fffff400 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1247,7 +1297,7 @@ }; pioB: gpio@fffff600 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1259,7 +1309,7 @@ }; pioC: gpio@fffff800 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1270,7 +1320,7 @@ }; pioD: gpio@fffffa00 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1312,7 +1362,7 @@ compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; pit: timer@fffffe40 { @@ -1338,7 +1388,7 @@ compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; reg = <0xfffffea8 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; watchdog: watchdog@ffffff80 { diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi new file mode 100644 index 000000000000..b217a908f525 --- /dev/null +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi @@ -0,0 +1,1258 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> + */ + +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/at91-usart.h> +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> + +/ { + model = "Microchip SAM9X7 SoC"; + compatible = "microchip,sam9x7"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + reg = <0>; + device_type = "cpu"; + }; + }; + + clocks { + slow_xtal: clock-slowxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + main_xtal: clock-mainxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + sram: sram@300000 { + compatible = "mmio-sram"; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ahb { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + sdmmc0: mmc@80000000 { + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci"; + reg = <0x80000000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 12>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + sdmmc1: mmc@90000000 { + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci"; + reg = <0x90000000 0x300>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + }; + + apb { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + flx4: flexcom@f0000000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0000000 0x200>; + ranges = <0x0 0xf0000000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + status = "disabled"; + + uart4: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx5: flexcom@f0004000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0004000 0x200>; + ranges = <0x0 0xf0004000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + status = "disabled"; + + uart5: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi5: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c5: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + dma0: dma-controller@f0008000 { + compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma"; + reg = <0xf0008000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + ssc: ssc@f0010000 { + compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; + clock-names = "pclk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s: i2s@f001c000 { + compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; + clock-names = "pclk", "gclk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + flx11: flexcom@f0020000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0020000 0x200>; + ranges = <0x0 0xf0020000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + status = "disabled"; + + uart11: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c11: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx12: flexcom@f0024000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0024000 0x200>; + ranges = <0x0 0xf0024000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + status = "disabled"; + + uart12: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c12: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + pit64b0: timer@f0028000 { + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xf0028000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; + clock-names = "pclk", "gclk"; + }; + + sha: crypto@f002c000 { + compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha"; + reg = <0xf002c000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "sha_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx"; + }; + + trng: rng@f0030000 { + compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng"; + reg = <0xf0030000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + status = "disabled"; + }; + + aes: crypto@f0034000 { + compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes"; + reg = <0xf0034000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "aes_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>; + dma-names = "tx", "rx"; + }; + + tdes: crypto@f0038000 { + compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes"; + reg = <0xf0038000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "tdes_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(30))>; + dma-names = "tx", "rx"; + }; + + classd: sound@f003c000 { + compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd"; + reg = <0xf003c000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; + clock-names = "pclk", "gclk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>; + dma-names = "tx"; + status = "disabled"; + }; + + pit64b1: timer@f0040000 { + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xf0040000 0x100>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; + clock-names = "pclk", "gclk"; + }; + + can0: can@f8000000 { + compatible = "bosch,m_can"; + reg = <0xf8000000 0x100>, <0x300000 0x7800>; + reg-names = "m_can", "message_ram"; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>, + <68 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "bosch,m_can"; + reg = <0xf8004000 0x100>, <0x300000 0xbc00>; + reg-names = "m_can", "message_ram"; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>, + <69 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + tcb: timer@f8008000 { + compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon"; + reg = <0xf8008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>; + clock-names = "t0_clk", "gclk", "slow_clk"; + }; + + flx6: flexcom@f8010000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8010000 0x200>; + ranges = <0x0 0xf8010000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + status = "disabled"; + + uart6: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c6: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx7: flexcom@f8014000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8014000 0x200>; + ranges = <0x0 0xf8014000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + status = "disabled"; + + uart7: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c7: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx8: flexcom@f8018000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8018000 0x200>; + ranges = <0x0 0xf8018000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + status = "disabled"; + + uart8: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c8: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx0: flexcom@f801c000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf801c000 0x200>; + ranges = <0x0 0xf801c000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + status = "disabled"; + + uart0: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx1: flexcom@f8020000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8020000 0x200>; + ranges = <0x0 0xf8020000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + status = "disabled"; + + uart1: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx2: flexcom@f8024000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8024000 0x200>; + ranges = <0x0 0xf8024000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + status = "disabled"; + + uart2: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx3: flexcom@f8028000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8028000 0x200>; + ranges = <0x0 0xf8028000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + status = "disabled"; + + uart3: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi3: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + gmac: ethernet@f802c000 { + compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem"; + reg = <0xf802c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 0 */ + <60 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 1 */ + <61 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 2 */ + <62 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 3 */ + <63 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 4 */ + <64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */ + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>; + clock-names = "hclk", "pclk", "tx_clk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 67>; + assigned-clock-rates = <266666666>; + status = "disabled"; + }; + + pwm0: pwm@f8034000 { + compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; + #pwm-cells = <3>; + status = "disabled"; + }; + + flx9: flexcom@f8040000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8040000 0x200>; + ranges = <0x0 0xf8040000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + status = "disabled"; + + uart9: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c9: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx10: flexcom@f8044000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8044000 0x200>; + ranges = <0x0 0xf8044000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + status = "disabled"; + + uart10: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c10: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + matrix: matrix@ffffde00 { + compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x200>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x300>, <0xffffe600 0x100>; + }; + + mpddrc: mpddrc@ffffe800 { + compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc"; + reg = <0xffffe800 0x200>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clock-names = "ddrck", "mpddr"; + }; + + smc: smc@ffffea00 { + compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x100>; + }; + + aic: interrupt-controller@fffff100 { + compatible = "microchip,sam9x7-aic"; + reg = <0xfffff100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + pinctrl: pinctrl@fffff400 { + compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */ + atmel,mux-mask = < + /* A B C D */ + 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */ + 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000 /* pioB */ + 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */ + 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */ + >; + + pioA: gpio@fffff400 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + + pioB: gpio@fffff600 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <26>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; + }; + + pioC: gpio@fffff800 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; + }; + + pioD: gpio@fffffa00 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + }; + }; + + pmc: clock-controller@fffffc00 { + compatible = "microchip,sam9x7-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + reset_controller: reset-controller@fffffe00 { + compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k 0>; + }; + + poweroff: poweroff@fffffe10 { + compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc"; + reg = <0xfffffe10 0x10>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk32k 0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + rtt: rtc@fffffe20 { + compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt"; + reg = <0xfffffe20 0x20>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + clk32k: clock-controller@fffffe50 { + compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + gpbr: syscon@fffffe60 { + compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffe60 0x10>; + }; + + rtc: rtc@fffffea8 { + compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc"; + reg = <0xfffffea8 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + watchdog: watchdog@ffffff80 { + compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt"; + reg = <0xffffff80 0x24>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi index 5f8e297e19ed..dc22fb679333 100644 --- a/arch/arm/boot/dts/microchip/sama5d2.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi @@ -136,7 +136,7 @@ status = "disabled"; }; - usb1: ohci@400000 { + usb1: usb@400000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -145,7 +145,7 @@ status = "disabled"; }; - usb2: ehci@500000 { + usb2: usb@500000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1019,7 +1019,7 @@ }; }; - trng@fc01c000 { + trng: rng@fc01c000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfc01c000 0x100>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi index d4fc0c1dfc10..e95799c17fdb 100644 --- a/arch/arm/boot/dts/microchip/sama5d3.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi @@ -419,7 +419,7 @@ clock-names = "tdes_clk"; }; - trng@f8040000 { + trng: rng@f8040000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xf8040000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; @@ -493,7 +493,7 @@ pinctrl: pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ @@ -1074,7 +1074,7 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1083,7 +1083,7 @@ status = "disabled"; }; - usb2: ehci@700000 { + usb2: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts index bffd61397cb5..18943b873fff 100644 --- a/arch/arm/boot/dts/microchip/sama5d34ek.dts +++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts @@ -36,7 +36,7 @@ i2c1: i2c@f0018000 { status = "okay"; - 24c256@50 { + eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; pagesize = <64>; diff --git a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi index 830a0954ba1b..362806afef44 100644 --- a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi @@ -79,7 +79,7 @@ }; i2c1: i2c@f0018000 { - pmic: act8865@5b { + act8865: pmic@5b { compatible = "active-semi,act8865"; reg = <0x5b>; status = "disabled"; diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi index 3652c9e24124..90da04b84b39 100644 --- a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi @@ -172,7 +172,7 @@ status = "okay"; }; - usb1: ohci@600000 { + usb1: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH &pioD 26 GPIO_ACTIVE_LOW @@ -181,7 +181,7 @@ status = "okay"; }; - usb2: ehci@700000 { + usb2: usb@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi index 58ceed997889..59a7d557c7cb 100644 --- a/arch/arm/boot/dts/microchip/sama5d4.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi @@ -119,7 +119,7 @@ status = "disabled"; }; - usb1: ohci@500000 { + usb1: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -128,7 +128,7 @@ status = "disabled"; }; - usb2: ehci@600000 { + usb2: usb@600000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -658,7 +658,7 @@ status = "disabled"; }; - trng@fc030000 { + trng: rng@fc030000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfc030000 0x100>; interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>; @@ -791,7 +791,7 @@ pinctrl: pinctrl@fc06a000 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "simple-mfd"; ranges = <0xfc068000 0xfc068000 0x100 0xfc06a000 0xfc06a000 0x4000>; /* WARNING: revisit as pin spec has changed */ diff --git a/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h new file mode 100644 index 000000000000..c591f333cacb --- /dev/null +++ b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h @@ -0,0 +1,947 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#define PINMUX_PIN(no, func, ioset) \ +(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20)) + +#define PIN_PA0 0 +#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0) +#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1) +#define PIN_PA0__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA0, 2, 1) +#define PIN_PA0__NWER0 PINMUX_PIN(PIN_PA0, 3, 1) + +#define PIN_PA1 1 +#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0) +#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1) +#define PIN_PA1__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA1, 2, 1) +#define PIN_PA1__A21 PINMUX_PIN(PIN_PA1, 3, 1) + +#define PIN_PA2 2 +#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0) +#define PIN_PA2__SDMMC0_RSTN PINMUX_PIN(PIN_PA2, 1, 1) +#define PIN_PA2__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA2, 2, 1) +#define PIN_PA2__A22 PINMUX_PIN(PIN_PA2, 3, 1) + +#define PIN_PA3 3 +#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0) +#define PIN_PA3__SDMMC0_DAT0 PINMUX_PIN(PIN_PA3, 1, 1) +#define PIN_PA3__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA3, 2, 1) +#define PIN_PA3__D0 PINMUX_PIN(PIN_PA3, 3, 1) + +#define PIN_PA4 4 +#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0) +#define PIN_PA4__SDMMC0_DAT1 PINMUX_PIN(PIN_PA4, 1, 1) +#define PIN_PA4__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA4, 2, 1) +#define PIN_PA4__D1 PINMUX_PIN(PIN_PA4, 3, 1) + +#define PIN_PA5 5 +#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0) +#define PIN_PA5__SDMMC0_DAT4 PINMUX_PIN(PIN_PA5, 1, 1) +#define PIN_PA5__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA5, 2, 3) +#define PIN_PA5__D4 PINMUX_PIN(PIN_PA5, 3, 1) +#define PIN_PA5__TCLK4 PINMUX_PIN(PIN_PA5, 6, 3) + +#define PIN_PA6 6 +#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0) +#define PIN_PA6__SDMMC0_DAT5 PINMUX_PIN(PIN_PA6, 1, 1) +#define PIN_PA6__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA6, 2, 3) +#define PIN_PA6__D5 PINMUX_PIN(PIN_PA6, 3, 1) +#define PIN_PA6__TIOB4 PINMUX_PIN(PIN_PA6, 6, 3) + +#define PIN_PA7 7 +#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0) +#define PIN_PA7__SDMMC0_DAT6 PINMUX_PIN(PIN_PA7, 1, 1) +#define PIN_PA7__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA7, 2, 3) +#define PIN_PA7__D6 PINMUX_PIN(PIN_PA7, 3, 1) +#define PIN_PA7__TIOA4 PINMUX_PIN(PIN_PA7, 6, 3) + +#define PIN_PA8 8 +#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0) +#define PIN_PA8__SDMMC0_DAT7 PINMUX_PIN(PIN_PA8, 1, 1) +#define PIN_PA8__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA8, 2, 3) +#define PIN_PA8__D7 PINMUX_PIN(PIN_PA8, 3, 1) +#define PIN_PA8__TIOA5 PINMUX_PIN(PIN_PA8, 6, 3) + +#define PIN_PA9 9 +#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0) +#define PIN_PA9__SDMMC0_DAT2 PINMUX_PIN(PIN_PA9, 1, 1) +#define PIN_PA9__FLEXCOM0_IO2 PINMUX_PIN(PIN_PA9, 2, 1) +#define PIN_PA9__D2 PINMUX_PIN(PIN_PA9, 3, 1) +#define PIN_PA9__TIOB5 PINMUX_PIN(PIN_PA9, 6, 3) + +#define PIN_PA10 10 +#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0) +#define PIN_PA10__SDMMC0_DAT3 PINMUX_PIN(PIN_PA10, 1, 1) +#define PIN_PA10__FLEXCOM0_IO3 PINMUX_PIN(PIN_PA10, 2, 1) +#define PIN_PA10__D3 PINMUX_PIN(PIN_PA10, 3, 1) +#define PIN_PA10__TCLK5 PINMUX_PIN(PIN_PA10, 6, 3) + +#define PIN_PA11 11 +#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0) +#define PIN_PA11__SDMMC0_DS PINMUX_PIN(PIN_PA11, 1, 1) +#define PIN_PA11__FLEXCOM0_IO4 PINMUX_PIN(PIN_PA11, 2, 1) +#define PIN_PA11__NANDRDY PINMUX_PIN(PIN_PA11, 3, 1) +#define PIN_PA11__TIOB3 PINMUX_PIN(PIN_PA11, 6, 3) + +#define PIN_PA12 12 +#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0) +#define PIN_PA12__FLEXCOM0_IO0 PINMUX_PIN(PIN_PA12, 2, 1) +#define PIN_PA12__NRD PINMUX_PIN(PIN_PA12, 3, 1) +#define PIN_PA12__PCK0 PINMUX_PIN(PIN_PA12, 4, 1) +#define PIN_PA12__EXT_IRQ0 PINMUX_PIN(PIN_PA12, 5, 1) +#define PIN_PA12__TIOA3 PINMUX_PIN(PIN_PA12, 6, 3) + +#define PIN_PA13 13 +#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0) +#define PIN_PA13__FLEXCOM0_IO1 PINMUX_PIN(PIN_PA13, 2, 1) +#define PIN_PA13__NCS0 PINMUX_PIN(PIN_PA13, 3, 1) +#define PIN_PA13__PCK1 PINMUX_PIN(PIN_PA13, 4, 1) +#define PIN_PA13__TCLK3 PINMUX_PIN(PIN_PA13, 6, 3) + +#define PIN_PA14 14 +#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0) +#define PIN_PA14__FLEXCOM4_IO4 PINMUX_PIN(PIN_PA14, 1, 1) +#define PIN_PA14__SDMMC0_WP PINMUX_PIN(PIN_PA14, 2, 1) +#define PIN_PA14__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA14, 3, 4) + +#define PIN_PA15 15 +#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) +#define PIN_PA15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PA15, 1, 1) +#define PIN_PA15__SDMMC0_1V8SEL PINMUX_PIN(PIN_PA15, 2, 1) +#define PIN_PA15__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA15, 3, 4) + +#define PIN_PA16 16 +#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0) +#define PIN_PA16__FLEXCOM4_IO2 PINMUX_PIN(PIN_PA16, 1, 1) +#define PIN_PA16__SDMMCo_CD PINMUX_PIN(PIN_PA16, 2, 1) +#define PIN_PA16__PCK2 PINMUX_PIN(PIN_PA16, 4, 1) +#define PIN_PA16__EXT_IRQ1 PINMUX_PIN(PIN_PA16, 5, 1) + +#define PIN_PA17 17 +#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0) +#define PIN_PA17__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA17, 1, 1) + +#define PIN_PA18 18 +#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0) +#define PIN_PA18__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA18, 1, 1) + +#define PIN_PA19 19 +#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0) +#define PIN_PA19__TK0 PINMUX_PIN(PIN_PA19, 1, 1) +#define PIN_PA19__FLEXCOM4_IO5 PINMUX_PIN(PIN_PA19, 3, 1) +#define PIN_PA19__PWML0 PINMUX_PIN(PIN_PA19, 4, 3) + +#define PIN_PA20 20 +#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0) +#define PIN_PA20__TD0 PINMUX_PIN(PIN_PA20, 1, 1) +#define PIN_PA20__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA20, 2, 2) +#define PIN_PA20__FLEXCOM4_IO6 PINMUX_PIN(PIN_PA20, 3, 1) +#define PIN_PA20__PWMH0 PINMUX_PIN(PIN_PA20, 4, 3) + +#define PIN_PA21 21 +#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0) +#define PIN_PA21__TF0 PINMUX_PIN(PIN_PA21, 1, 1) +#define PIN_PA21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA21, 2, 2) +#define PIN_PA21__PWML1 PINMUX_PIN(PIN_PA21, 4, 3) + +#define PIN_PA22 22 +#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0) +#define PIN_PA22__RD0 PINMUX_PIN(PIN_PA22, 1, 1) +#define PIN_PA22__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA22, 2, 2) +#define PIN_PA22__PDMC0_DS1 PINMUX_PIN(PIN_PA22, 3, 1) +#define PIN_PA22__PWMH1 PINMUX_PIN(PIN_PA22, 4, 3) + +#define PIN_PA23 23 +#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0) +#define PIN_PA23__RK0 PINMUX_PIN(PIN_PA23, 1, 1) +#define PIN_PA23__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA23, 2, 2) +#define PIN_PA23__PDMC0_CLK PINMUX_PIN(PIN_PA23, 3, 1) +#define PIN_PA23__PWML2 PINMUX_PIN(PIN_PA23, 4, 3) + +#define PIN_PA24 24 +#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0) +#define PIN_PA24__RF0 PINMUX_PIN(PIN_PA24, 1, 1) +#define PIN_PA24__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA24, 2, 2) +#define PIN_PA24__PDMC0_DS0 PINMUX_PIN(PIN_PA24, 3, 1) +#define PIN_PA24__PWMH2 PINMUX_PIN(PIN_PA24, 4, 3) + +#define PIN_PA25 25 +#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0) +#define PIN_PA25__G0_TXCTL PINMUX_PIN(PIN_PA25, 1, 1) +#define PIN_PA25__FLEXCOM6_IO2 PINMUX_PIN(PIN_PA25, 2, 1) + +#define PIN_PA26 26 +#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0) +#define PIN_PA26__G0_TX0 PINMUX_PIN(PIN_PA26, 1, 1) +#define PIN_PA26__FLEXCOM6_IO3 PINMUX_PIN(PIN_PA26, 2, 1) + +#define PIN_PA27 27 +#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0) +#define PIN_PA27__G0_TX1 PINMUX_PIN(PIN_PA27, 1, 1) +#define PIN_PA27__FLEXCOM6_IO4 PINMUX_PIN(PIN_PA27, 2, 1) + +#define PIN_PA28 28 +#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0) +#define PIN_PA28__G0_RXCTL PINMUX_PIN(PIN_PA28, 1, 1) +#define PIN_PA28__FLEXCOM6_IO0 PINMUX_PIN(PIN_PA28, 2, 1) + +#define PIN_PA29 29 +#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0) +#define PIN_PA29__G0_RX0 PINMUX_PIN(PIN_PA29, 1, 1) +#define PIN_PA29__FLEXCOM6_IO1 PINMUX_PIN(PIN_PA29, 2, 1) + +#define PIN_PA30 30 +#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0) +#define PIN_PA30__G0_RX1 PINMUX_PIN(PIN_PA30, 1, 1) +#define PIN_PA30__FLEXCOM8_IO0 PINMUX_PIN(PIN_PA30, 2, 1) + +#define PIN_PA31 31 +#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0) +#define PIN_PA31__G0_MDC PINMUX_PIN(PIN_PA31, 1, 1) +#define PIN_PA31__FLEXCOM8_IO1 PINMUX_PIN(PIN_PA31, 2, 1) + +#define PIN_PB0 32 +#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0) +#define PIN_PB0__G0_MDIO PINMUX_PIN(PIN_PB0, 1, 1) +#define PIN_PB0__FLEXCOM8_IO3 PINMUX_PIN(PIN_PB0, 2, 2) + +#define PIN_PB1 33 +#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0) +#define PIN_PB1__G0_REFCK PINMUX_PIN(PIN_PB1, 1, 2) +#define PIN_PB1__FLEXCOM8_IO2 PINMUX_PIN(PIN_PB1, 2, 1) + +#define PIN_PB2 34 +#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0) +#define PIN_PB2__G0_RX2 PINMUX_PIN(PIN_PB2, 1, 1) +#define PIN_PB2__FLEXCOM8_IO4 PINMUX_PIN(PIN_PB2, 2, 1) +#define PIN_PB2__G0_RXER PINMUX_PIN(PIN_PB2, 3, 2) +#define PIN_PB2__RK0 PINMUX_PIN(PIN_PB2, 4, 2) + +#define PIN_PB3 35 +#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) +#define PIN_PB3__G0_RXCK PINMUX_PIN(PIN_PB3, 1, 1) +#define PIN_PB3__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB3, 2, 2) +#define PIN_PB3__TK0 PINMUX_PIN(PIN_PB3, 4, 2) + +#define PIN_PB4 36 +#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0) +#define PIN_PB4__G0_TX2 PINMUX_PIN(PIN_PB4, 1, 1) +#define PIN_PB4__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB4, 2, 2) +#define PIN_PB4__TF0 PINMUX_PIN(PIN_PB4, 4, 2) + +#define PIN_PB5 37 +#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0) +#define PIN_PB5__G0_TX3 PINMUX_PIN(PIN_PB5, 1, 1) +#define PIN_PB5__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB5, 2, 1) +#define PIN_PB5__TD0 PINMUX_PIN(PIN_PB5, 4, 2) + +#define PIN_PB6 38 +#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0) +#define PIN_PB6__G0_RX3 PINMUX_PIN(PIN_PB6, 1, 1) +#define PIN_PB6__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB6, 2, 2) +#define PIN_PB6__RD0 PINMUX_PIN(PIN_PB6, 4, 2) + +#define PIN_PB7 39 +#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0) +#define PIN_PB7__G0_TSUCOMP PINMUX_PIN(PIN_PB7, 1, 1) +#define PIN_PB7__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB7, 2, 2) +#define PIN_PB7__ADTRG PINMUX_PIN(PIN_PB7, 3, 1) +#define PIN_PB7__RF0 PINMUX_PIN(PIN_PB7, 4, 2) + +#define PIN_PB8 40 +#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0) +#define PIN_PB8__QSPI0_IO3 PINMUX_PIN(PIN_PB8, 1, 1) +#define PIN_PB8__PCK3 PINMUX_PIN(PIN_PB8, 2, 1) +#define PIN_PB8__FLEXCOM2_IO1 PINMUX_PIN(PIN_PB8, 4, 2) + +#define PIN_PB9 41 +#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0) +#define PIN_PB9__QSPI0_IO2 PINMUX_PIN(PIN_PB9, 1, 1) +#define PIN_PB9__FLEXCOM2_IO0 PINMUX_PIN(PIN_PB9, 4, 2) +#define PIN_PB9__PWMEXTRG0 PINMUX_PIN(PIN_PB9, 5, 1) + +#define PIN_PB10 42 +#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0) +#define PIN_PB10__QSPI0_IO1 PINMUX_PIN(PIN_PB10, 1, 1) +#define PIN_PB10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PB10, 4, 2) +#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 5, 1) + +#define PIN_PB11 43 +#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0) +#define PIN_PB11__QSPI0_IO0 PINMUX_PIN(PIN_PB11, 1, 1) +#define PIN_PB11__FLEXCOM2_IO5 PINMUX_PIN(PIN_PB11, 4, 2) +#define PIN_PB11__PWML3 PINMUX_PIN(PIN_PB11, 5, 1) +#define PIN_PB11__TIOB3 PINMUX_PIN(PIN_PB11, 6, 2) + +#define PIN_PB12 44 +#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0) +#define PIN_PB12__QSPI0_CS PINMUX_PIN(PIN_PB12, 1, 1) +#define PIN_PB12__FLEXCOM2_IO3 PINMUX_PIN(PIN_PB12, 4, 2) +#define PIN_PB12__PWMFI1 PINMUX_PIN(PIN_PB12, 6, 1) +#define PIN_PB12__TIOA3 PINMUX_PIN(PIN_PB12, 6, 2) + +#define PIN_PB13 45 +#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0) +#define PIN_PB13__QSPI0_SCK PINMUX_PIN(PIN_PB13, 1, 1) +#define PIN_PB13__FLEXCOM2_IO2 PINMUX_PIN(PIN_PB13, 4, 2) +#define PIN_PB13__PWMFI0 PINMUX_PIN(PIN_PB13, 5, 1) +#define PIN_PB13__TCLK3 PINMUX_PIN(PIN_PB13, 6, 2) + +#define PIN_PB14 46 +#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0) +#define PIN_PB14__QSPI0_SCKN PINMUX_PIN(PIN_PB14, 1, 1) +#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 2, 1) +#define PIN_PB14__I2SMCC0_CK PINMUX_PIN(PIN_PB14, 3, 3) +#define PIN_PB14__FLEXCOM10_IO5 PINMUX_PIN(PIN_PB14, 4, 1) +#define PIN_PB14__PWMH3 PINMUX_PIN(PIN_PB14, 5, 1) +#define PIN_PB14__FLEXCOM2_IO1 PINMUX_PIN(PIN_PB14, 7, 4) + +#define PIN_PB15 47 +#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0) +#define PIN_PB15__QSPI0_IO4 PINMUX_PIN(PIN_PB15, 1, 1) +#define PIN_PB15__QSPI1_IO0 PINMUX_PIN(PIN_PB15, 2, 1) +#define PIN_PB15__I2SMCC0_WS PINMUX_PIN(PIN_PB15, 3, 3) +#define PIN_PB15__FLEXCOM10_IO6 PINMUX_PIN(PIN_PB15, 4, 1) +#define PIN_PB15__PWML0 PINMUX_PIN(PIN_PB15, 5, 1) +#define PIN_PB15__TCLK4 PINMUX_PIN(PIN_PB15, 6, 2) +#define PIN_PB15__FLEXCOM2_IO0 PINMUX_PIN(PIN_PB15, 7, 4) + +#define PIN_PB16 48 +#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0) +#define PIN_PB16__QSPI0_IO5 PINMUX_PIN(PIN_PB16, 1, 1) +#define PIN_PB16__QSPI1_IO1 PINMUX_PIN(PIN_PB16, 2, 1) +#define PIN_PB16__I2SMCC0_DIN0 PINMUX_PIN(PIN_PB16, 3, 3) +#define PIN_PB16__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB16, 4, 1) +#define PIN_PB16__PWMH0 PINMUX_PIN(PIN_PB16, 5, 1) +#define PIN_PB16__TIOB4 PINMUX_PIN(PIN_PB16, 6, 2) + +#define PIN_PB17 49 +#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0) +#define PIN_PB17__QSPI0_IO6 PINMUX_PIN(PIN_PB17, 1, 1) +#define PIN_PB17__QSPI1_IO2 PINMUX_PIN(PIN_PB17, 2, 1) +#define PIN_PB17__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PB17, 3, 3) +#define PIN_PB17__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB17, 4, 1) +#define PIN_PB17__PWML1 PINMUX_PIN(PIN_PB17, 5, 1) +#define PIN_PB17__TIOA4 PINMUX_PIN(PIN_PB17, 6, 2) + +#define PIN_PB18 50 +#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0) +#define PIN_PB18__QSPI0_IO7 PINMUX_PIN(PIN_PB18, 1, 1) +#define PIN_PB18__QSPI1_IO3 PINMUX_PIN(PIN_PB18, 2, 1) +#define PIN_PB18__I2SMCC0_MCK PINMUX_PIN(PIN_PB18, 3, 3) +#define PIN_PB18__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB18, 4, 1) +#define PIN_PB18__PWMH1 PINMUX_PIN(PIN_PB18, 5, 1) +#define PIN_PB18__TIOA5 PINMUX_PIN(PIN_PB18, 6, 2) + +#define PIN_PB19 51 +#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0) +#define PIN_PB19__QSPI0_DQS PINMUX_PIN(PIN_PB19, 1, 1) +#define PIN_PB19__EXT_IRQ1 PINMUX_PIN(PIN_PB19, 2, 2) +#define PIN_PB19__PCK4 PINMUX_PIN(PIN_PB19, 3, 1) +#define PIN_PB19__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB19, 4, 1) +#define PIN_PB19__PWML2 PINMUX_PIN(PIN_PB19, 5, 1) +#define PIN_PB19__TIOB5 PINMUX_PIN(PIN_PB19, 6, 2) + +#define PIN_PB20 52 +#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0) +#define PIN_PB20__QSPI0_INT PINMUX_PIN(PIN_PB20, 1, 1) +#define PIN_PB20__QSPI1_CS PINMUX_PIN(PIN_PB20, 2, 1) +#define PIN_PB20__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB20, 4, 1) +#define PIN_PB20__PWMH2 PINMUX_PIN(PIN_PB20, 5, 1) +#define PIN_PB20__TCLK5 PINMUX_PIN(PIN_PB20, 6, 2) + +#define PIN_PB21 53 +#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0) +#define PIN_PB21__SDMMC1_RSTN PINMUX_PIN(PIN_PB21, 1, 1) +#define PIN_PB21__FLEXCOM6_IO4 PINMUX_PIN(PIN_PB21, 2, 2) +#define PIN_PB21__TIOB2 PINMUX_PIN(PIN_PB21, 3, 2) +#define PIN_PB21__ADTRG PINMUX_PIN(PIN_PB21, 4, 2) +#define PIN_PB21__EXT_IRQ0 PINMUX_PIN(PIN_PB21, 5, 2) + +#define PIN_PB22 54 +#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) +#define PIN_PB22__SDMMC1_CMD PINMUX_PIN(PIN_PB22, 1, 1) +#define PIN_PB22__FLEXCOM6_IO3 PINMUX_PIN(PIN_PB22, 2, 2) +#define PIN_PB22__TCLK2 PINMUX_PIN(PIN_PB22, 3, 2) + +#define PIN_PB23 55 +#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0) +#define PIN_PB23__SDMMC1_CK PINMUX_PIN(PIN_PB23, 1, 1) +#define PIN_PB23__FLEXCOM6_IO2 PINMUX_PIN(PIN_PB23, 2, 2) +#define PIN_PB23__TIOA2 PINMUX_PIN(PIN_PB23, 3, 2) + +#define PIN_PB24 56 +#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0) +#define PIN_PB24__SDMMC1_DAT0 PINMUX_PIN(PIN_PB24, 1, 1) +#define PIN_PB24__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB24, 2, 2) + +#define PIN_PB25 57 +#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0) +#define PIN_PB25__SDMMC1_DAT1 PINMUX_PIN(PIN_PB25, 1, 1) +#define PIN_PB25__FLEXCOM6_IO1 PINMUX_PIN(PIN_PB25, 2, 2) +#define PIN_PB25__TIOB2 PINMUX_PIN(PIN_PB25, 3, 1) + +#define PIN_PB26 58 +#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0) +#define PIN_PB26__SDMMC1_DAT2 PINMUX_PIN(PIN_PB26, 1, 1) +#define PIN_PB26__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB26, 2, 3) +#define PIN_PB26__TCLK2 PINMUX_PIN(PIN_PB26, 3, 1) + +#define PIN_PB27 59 +#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0) +#define PIN_PB27__SDMMC1_DAT3 PINMUX_PIN(PIN_PB27, 1, 1) +#define PIN_PB27__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB27, 2, 3) +#define PIN_PB27__TIOA2 PINMUX_PIN(PIN_PB27, 3, 1) + +#define PIN_PB28 60 +#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0) +#define PIN_PB28__SDMMC1_WP PINMUX_PIN(PIN_PB28, 1, 1) +#define PIN_PB28__FLEXCOM1_IO0 PINMUX_PIN(PIN_PB28, 3, 3) +#define PIN_PB28__D15 PINMUX_PIN(PIN_PB28, 5, 1) + +#define PIN_PB29 61 +#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0) +#define PIN_PB29__SDMMC1_CD PINMUX_PIN(PIN_PB29, 1, 1) +#define PIN_PB29__I2SMCC0_MCK PINMUX_PIN(PIN_PB29, 2, 1) +#define PIN_PB29__FLEXCOM1_IO1 PINMUX_PIN(PIN_PB29, 3, 3) +#define PIN_PB29__D14 PINMUX_PIN(PIN_PB29, 5, 2) + +#define PIN_PB30 62 +#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0) +#define PIN_PB30__SDMMC1_1V8SEL PINMUX_PIN(PIN_PB30, 1, 1) +#define PIN_PB30__I2SMCC1_MCK PINMUX_PIN(PIN_PB30, 2, 2) +#define PIN_PB30__FLEXCOM1_IO2 PINMUX_PIN(PIN_PB30, 3, 3) +#define PIN_PB30__TIOA1 PINMUX_PIN(PIN_PB30, 4, 1) +#define PIN_PB30__NCS1 PINMUX_PIN(PIN_PB30, 5, 1) + +#define PIN_PB31 63 +#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0) +#define PIN_PB31__PCK7 PINMUX_PIN(PIN_PB31, 1, 2) +#define PIN_PB31__I2SMCC1_DIN1 PINMUX_PIN(PIN_PB31, 2, 1) +#define PIN_PB31__FLEXCOM1_IO3 PINMUX_PIN(PIN_PB31, 3, 3) +#define PIN_PB31__TCLK1 PINMUX_PIN(PIN_PB31, 4, 1) +#define PIN_PB31__NWE PINMUX_PIN(PIN_PB31, 5, 2) + +#define PIN_PC0 64 +#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0) +#define PIN_PC0__PCK6 PINMUX_PIN(PIN_PC0, 1, 2) +#define PIN_PC0__I2SMCC1_DIN2 PINMUX_PIN(PIN_PC0, 2, 1) +#define PIN_PC0__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC0, 3, 2) +#define PIN_PC0__TIOB1 PINMUX_PIN(PIN_PC0, 4, 1) +#define PIN_PC0__NWR1 PINMUX_PIN(PIN_PC0, 5, 1) + +#define PIN_PC1 65 +#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0) +#define PIN_PC1__PCK5 PINMUX_PIN(PIN_PC1, 1, 1) +#define PIN_PC1__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC1, 3, 2) +#define PIN_PC1__SMCK PINMUX_PIN(PIN_PC1, 5, 1) + +#define PIN_PC2 66 +#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0) +#define PIN_PC2__EXT_IRQ0 PINMUX_PIN(PIN_PC2, 1, 3) +#define PIN_PC2__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC2, 3, 2) +#define PIN_PC2__A11 PINMUX_PIN(PIN_PC2, 5, 1) + +#define PIN_PC3 67 +#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0) +#define PIN_PC3__SPDIF_RX PINMUX_PIN(PIN_PC3, 1, 2) +#define PIN_PC3__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC3, 3, 2) +#define PIN_PC3__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC3, 4, 2) +#define PIN_PC3__A10 PINMUX_PIN(PIN_PC3, 5, 1) + +#define PIN_PC4 68 +#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0) +#define PIN_PC4__SPDIF_TX PINMUX_PIN(PIN_PC4, 1, 2) +#define PIN_PC4__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC4, 3, 2) +#define PIN_PC4__FLEXCOM0_IO3 PINMUX_PIN(PIN_PC4, 4, 2) +#define PIN_PC4__D0 PINMUX_PIN(PIN_PC4, 5, 2) + +#define PIN_PC5 69 +#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0) +#define PIN_PC5__I3CC_SDASPUE PINMUX_PIN(PIN_PC5, 1, 1) +#define PIN_PC5__I2SMCC1_DIN3 PINMUX_PIN(PIN_PC5, 2, 1) +#define PIN_PC5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PC5, 4, 2) +#define PIN_PC5__D1 PINMUX_PIN(PIN_PC5, 5, 2) + +#define PIN_PC6 70 +#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0) +#define PIN_PC6__I3CC_SCL PINMUX_PIN(PIN_PC6, 1, 1) +#define PIN_PC6__FLEXCOM0_IO1 PINMUX_PIN(PIN_PC6, 4, 2) +#define PIN_PC6__D4 PINMUX_PIN(PIN_PC6, 5, 2) + +#define PIN_PC7 71 +#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0) +#define PIN_PC7__I3CC_SDA PINMUX_PIN(PIN_PC7, 1, 1) +#define PIN_PC7__FLEXCOM0_IO0 PINMUX_PIN(PIN_PC7, 4, 2) +#define PIN_PC7__D5 PINMUX_PIN(PIN_PC7, 5, 2) + +#define PIN_PC8 72 +#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0) +#define PIN_PC8__I2SMCC0_DIN1 PINMUX_PIN(PIN_PC8, 1, 1) +#define PIN_PC8__PDMC0_DS1 PINMUX_PIN(PIN_PC8, 2, 2) +#define PIN_PC8__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PC8, 3, 1) +#define PIN_PC8__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC8, 4, 1) +#define PIN_PC8__D6 PINMUX_PIN(PIN_PC8, 5, 2) + +#define PIN_PC9 73 +#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) +#define PIN_PC9__I2SMCC0_DIN2 PINMUX_PIN(PIN_PC9, 1, 1) +#define PIN_PC9__PDMC0_CLK PINMUX_PIN(PIN_PC9, 2, 2) +#define PIN_PC9__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PC9, 3, 1) +#define PIN_PC9__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC9, 4, 1) +#define PIN_PC9__D7 PINMUX_PIN(PIN_PC9, 5, 2) + +#define PIN_PC10 74 +#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) +#define PIN_PC10__I2SMCC0_DIN3 PINMUX_PIN(PIN_PC10, 1, 1) +#define PIN_PC10__PDMC0_DS0 PINMUX_PIN(PIN_PC10, 2, 2) +#define PIN_PC10__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PC10, 3, 1) +#define PIN_PC10__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC10, 4, 1) +#define PIN_PC10__D2 PINMUX_PIN(PIN_PC10, 5, 2) + +#define PIN_PC11 75 +#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0) +#define PIN_PC11__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PC11, 1, 1) +#define PIN_PC11__PDMC1_DS0 PINMUX_PIN(PIN_PC11, 2, 1) +#define PIN_PC11__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC11, 4, 1) +#define PIN_PC10__D3 PINMUX_PIN(PIN_PC10, 5, 2) + +#define PIN_PC12 76 +#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0) +#define PIN_PC12__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PC12, 1, 1) +#define PIN_PC12__PDMC1_CLK PINMUX_PIN(PIN_PC12, 2, 1) +#define PIN_PC12__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC12, 4, 1) +#define PIN_PC12__A9 PINMUX_PIN(PIN_PC12, 5, 1) + +#define PIN_PC13 77 +#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0) +#define PIN_PC13__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PC13, 1, 1) +#define PIN_PC13__PDMC1_DS1 PINMUX_PIN(PIN_PC13, 2, 1) +#define PIN_PC13__A8 PINMUX_PIN(PIN_PC13, 5, 1) + +#define PIN_PC14 78 +#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0) +#define PIN_PC14__I2SMCC1_DIN0 PINMUX_PIN(PIN_PC14, 1, 1) +#define PIN_PC14__SPDIF_RX PINMUX_PIN(PIN_PC14, 2, 3) +#define PIN_PC14__FLEXCOM1_IO0 PINMUX_PIN(PIN_PC14, 3, 2) +#define PIN_PC14__A7 PINMUX_PIN(PIN_PC14, 5, 1) + +#define PIN_PC15 79 +#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) +#define PIN_PC15__I2SMCC1_WS PINMUX_PIN(PIN_PC15, 1, 1) +#define PIN_PC15__PDMC1_DS1 PINMUX_PIN(PIN_PC15, 2, 2) +#define PIN_PC15__FLEXCOM1_IO1 PINMUX_PIN(PIN_PC15, 3, 2) +#define PIN_PC15__A6 PINMUX_PIN(PIN_PC15, 5, 1) + +#define PIN_PC16 80 +#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0) +#define PIN_PC16__I2SMCC1_CK PINMUX_PIN(PIN_PC16, 1, 1) +#define PIN_PC16__PDMC1_CLK PINMUX_PIN(PIN_PC16, 2, 2) +#define PIN_PC16__FLEXCOM1_IO2 PINMUX_PIN(PIN_PC16, 3, 2) +#define PIN_PC16__TIOA1 PINMUX_PIN(PIN_PC16, 4, 2) +#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 5, 1) + +#define PIN_PC17 81 +#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0) +#define PIN_PC17__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PC17, 1, 1) +#define PIN_PC17__PDMC1_DS0 PINMUX_PIN(PIN_PC17, 2, 2) +#define PIN_PC17__FLEXCOM1_IO3 PINMUX_PIN(PIN_PC17, 3, 2) +#define PIN_PC17__TCLK1 PINMUX_PIN(PIN_PC17, 4, 2) +#define PIN_PC17__A4 PINMUX_PIN(PIN_PC17, 5, 1) + +#define PIN_PC18 82 +#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0) +#define PIN_PC18__I2SMCC0_DIN0 PINMUX_PIN(PIN_PC18, 1, 1) +#define PIN_PC18__SPDIF_TX PINMUX_PIN(PIN_PC18, 2, 3) +#define PIN_PC18__FLEXCOM1_IO4 PINMUX_PIN(PIN_PC18, 3, 2) +#define PIN_PC18__TIOB1 PINMUX_PIN(PIN_PC18, 4, 2) +#define PIN_PC18__A3 PINMUX_PIN(PIN_PC18, 5, 1) + +#define PIN_PC19 83 +#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0) +#define PIN_PC19__I2SMCC0_WS PINMUX_PIN(PIN_PC19, 1, 1) +#define PIN_PC19__PCK6 PINMUX_PIN(PIN_PC19, 2, 1) +#define PIN_PC19__A2 PINMUX_PIN(PIN_PC19, 5, 1) + +#define PIN_PC20 84 +#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0) +#define PIN_PC20__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PC20, 1, 1) +#define PIN_PC20__A1 PINMUX_PIN(PIN_PC20, 5, 1) + +#define PIN_PC21 85 +#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0) +#define PIN_PC21__I2SMCC0_CK PINMUX_PIN(PIN_PC21, 1, 1) +#define PIN_PC21__PCK7 PINMUX_PIN(PIN_PC21, 2, 1) +#define PIN_PC21__A0 PINMUX_PIN(PIN_PC21, 5, 1) + +#define PIN_PC22 86 +#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0) +#define PIN_PC22__NTRST PINMUX_PIN(PIN_PC22, 1, 1) +#define PIN_PC22__NWAIT PINMUX_PIN(PIN_PC22, 5, 1) + +#define PIN_PC23 87 +#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0) +#define PIN_PC23__TCK_SWCLK PINMUX_PIN(PIN_PC23, 1, 1) + +#define PIN_PC24 88 +#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0) +#define PIN_PC24__TMS_SWDIO PINMUX_PIN(PIN_PC24, 1, 1) + +#define PIN_PC25 89 +#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0) +#define PIN_PC25__TDI PINMUX_PIN(PIN_PC25, 1, 1) + +#define PIN_PC26 90 +#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0) +#define PIN_PC26__TDO PINMUX_PIN(PIN_PC26, 1, 1) +#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 5, 1) + +#define PIN_PC27 91 +#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0) +#define PIN_PC27__SDMMC2_CMD PINMUX_PIN(PIN_PC27, 1, 1) +#define PIN_PC27__FLEXCOM8_IO0 PINMUX_PIN(PIN_PC27, 2, 2) +#define PIN_PC27__TD1 PINMUX_PIN(PIN_PC27, 4, 2) +#define PIN_PC27__D8 PINMUX_PIN(PIN_PC27, 5, 1) + +#define PIN_PC28 92 +#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0) +#define PIN_PC28__SDMMC2_CK PINMUX_PIN(PIN_PC28, 1, 1) +#define PIN_PC28__FLEXCOM8_IO1 PINMUX_PIN(PIN_PC28, 2, 2) +#define PIN_PC28__TF1 PINMUX_PIN(PIN_PC28, 4, 2) +#define PIN_PC28__D9 PINMUX_PIN(PIN_PC28, 5, 1) + +#define PIN_PC29 93 +#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0) +#define PIN_PC29__SDMMC2_DAT0 PINMUX_PIN(PIN_PC29, 1, 1) +#define PIN_PC29__FLEXCOM8_IO2 PINMUX_PIN(PIN_PC29, 2, 2) +#define PIN_PC29__TK1 PINMUX_PIN(PIN_PC29, 4, 2) +#define PIN_PC29__D10 PINMUX_PIN(PIN_PC29, 5, 1) +#define PIN_PC29__TCLK0 PINMUX_PIN(PIN_PC29, 6, 1) + +#define PIN_PC30 94 +#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0) +#define PIN_PC30__SDMMC2_DAT1 PINMUX_PIN(PIN_PC30, 1, 1) +#define PIN_PC30__FLEXCOM8_IO3 PINMUX_PIN(PIN_PC30, 2, 2) +#define PIN_PC30__RD1 PINMUX_PIN(PIN_PC30, 4, 2) +#define PIN_PC30__D11 PINMUX_PIN(PIN_PC30, 5, 1) +#define PIN_PC30__TIOA0 PINMUX_PIN(PIN_PC30, 6, 1) + +#define PIN_PC31 95 +#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0) +#define PIN_PC31__SDMMC2_DAT2 PINMUX_PIN(PIN_PC31, 1, 1) +#define PIN_PC31__FLEXCOM8_IO4 PINMUX_PIN(PIN_PC31, 2, 2) +#define PIN_PC31__PCK0 PINMUX_PIN(PIN_PC31, 3, 2) +#define PIN_PC31__RK1 PINMUX_PIN(PIN_PC31, 4, 2) +#define PIN_PC31__D12 PINMUX_PIN(PIN_PC31, 5, 1) +#define PIN_PC31__TIOB0 PINMUX_PIN(PIN_PC31, 6, 1) + +#define PIN_PD0 96 +#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0) +#define PIN_PD0__SDMMC2_DAT3 PINMUX_PIN(PIN_PD0, 1, 1) +#define PIN_PD0__PCK1 PINMUX_PIN(PIN_PD0, 3, 2) +#define PIN_PD0__RF1 PINMUX_PIN(PIN_PD0, 4, 2) +#define PIN_PD0__D13 PINMUX_PIN(PIN_PD0, 5, 1) + +#define PIN_PD1 97 +#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0) +#define PIN_PD1__SDMMC2_WP PINMUX_PIN(PIN_PD1, 1, 1) +#define PIN_PD1__FLEXCOM1_IO5 PINMUX_PIN(PIN_PD1, 2, 1) +#define PIN_PD1__LCDC_HSYNC PINMUX_PIN(PIN_PD1, 3, 2) +#define PIN_PD1__FLEXCOM3_IO0 PINMUX_PIN(PIN_PD1, 4, 3) + +#define PIN_PD2 98 +#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0) +#define PIN_PD2__SDMMC2_CD PINMUX_PIN(PIN_PD2, 1, 1) +#define PIN_PD2__FLEXCOM1_IO6 PINMUX_PIN(PIN_PD2, 2, 1) +#define PIN_PD2__LCDC_VSYNC PINMUX_PIN(PIN_PD2, 3, 2) +#define PIN_PD2__FLEXCOM3_IO1 PINMUX_PIN(PIN_PD2, 4, 3) + +#define PIN_PD3 99 +#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0) +#define PIN_PD3__SDMMC2_1V8SEL PINMUX_PIN(PIN_PD3, 1, 1) +#define PIN_PD3__FLEXCOM1_IO4 PINMUX_PIN(PIN_PD3, 2, 1) +#define PIN_PD3__TIOA0 PINMUX_PIN(PIN_PD3, 3, 2) +#define PIN_PD3__FLEXCOM3_IO2 PINMUX_PIN(PIN_PD3, 4, 3) +#define PIN_PD3__EXT_IRQ1 PINMUX_PIN(PIN_PD3, 5, 3) + +#define PIN_PD4 100 +#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0) +#define PIN_PD4__LCDC_HSYNC PINMUX_PIN(PIN_PD4, 1, 1) +#define PIN_PD4__FLEXCOM1_IO2 PINMUX_PIN(PIN_PD4, 2, 1) +#define PIN_PD4__TIOB0 PINMUX_PIN(PIN_PD4, 3, 2) +#define PIN_PD4__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD4, 4, 3) + +#define PIN_PD5 101 +#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0) +#define PIN_PD5__LCDC_VSYNC PINMUX_PIN(PIN_PD5, 1, 1) +#define PIN_PD5__FLEXCOM1_IO3 PINMUX_PIN(PIN_PD5, 2, 1) +#define PIN_PD5__TCLK0 PINMUX_PIN(PIN_PD5, 3, 2) +#define PIN_PD5__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD5, 4, 3) + +#define PIN_PD6 102 +#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0) +#define PIN_PD6__LCDC_PWM PINMUX_PIN(PIN_PD6, 1, 1) +#define PIN_PD6__FLEXCOM1_IO1 PINMUX_PIN(PIN_PD6, 2, 1) +#define PIN_PD6__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD6, 4, 3) + +#define PIN_PD7 103 +#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0) +#define PIN_PD7__LCDC_DISP PINMUX_PIN(PIN_PD7, 1, 1) +#define PIN_PD7__FLEXCOM1_IO0 PINMUX_PIN(PIN_PD7, 2, 1) +#define PIN_PD7__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD7, 4, 3) + +#define PIN_PD8 104 +#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0) +#define PIN_PD8__CANTX0 PINMUX_PIN(PIN_PD8, 1, 1) +#define PIN_PD8__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD8, 2, 1) + +#define PIN_PD9 105 +#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0) +#define PIN_PD9__CANRX0 PINMUX_PIN(PIN_PD9, 1, 1) +#define PIN_PD9__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD9, 2, 1) + +#define PIN_PD10 106 +#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0) +#define PIN_PD10__CANTX1 PINMUX_PIN(PIN_PD10, 1, 1) +#define PIN_PD10__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD10, 2, 1) +#define PIN_PD10__TIOA1 PINMUX_PIN(PIN_PD10, 3, 3) + +#define PIN_PD11 107 +#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0) +#define PIN_PD11__CANRX1 PINMUX_PIN(PIN_PD11, 1, 1) +#define PIN_PD11__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD11, 2, 1) +#define PIN_PD11__TCLK1 PINMUX_PIN(PIN_PD11, 3, 3) + +#define PIN_PD12 108 +#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0) +#define PIN_PD12__CANTX2 PINMUX_PIN(PIN_PD12, 1, 1) +#define PIN_PD12__FLEXCOM7_IO4 PINMUX_PIN(PIN_PD12, 2, 1) +#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 3, 3) +#define PIN_PD12__PCK2 PINMUX_PIN(PIN_PD12, 4, 2) +#define PIN_PD12__FLEXCOM3_IO3 PINMUX_PIN(PIN_PD12, 5, 3) + +#define PIN_PD13 109 +#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0) +#define PIN_PD13__CANRX2 PINMUX_PIN(PIN_PD13, 1, 1) +#define PIN_PD13__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD13, 2, 1) +#define PIN_PD13__TIOA2 PINMUX_PIN(PIN_PD13, 3, 3) +#define PIN_PD13__PCK3 PINMUX_PIN(PIN_PD13, 4, 2) + +#define PIN_PD14 110 +#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0) +#define PIN_PD14__CANTX3 PINMUX_PIN(PIN_PD14, 1, 1) +#define PIN_PD14__FLEXCOM5_IO2 PINMUX_PIN(PIN_PD14, 2, 1) +#define PIN_PD14__TIOB2 PINMUX_PIN(PIN_PD14, 3, 3) + +#define PIN_PD15 111 +#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0) +#define PIN_PD15__CANRX3 PINMUX_PIN(PIN_PD15, 1, 1) +#define PIN_PD15__FLEXCOM5_IO3 PINMUX_PIN(PIN_PD15, 2, 1) +#define PIN_PD15__TCLK2 PINMUX_PIN(PIN_PD15, 3, 3) + +#define PIN_PD16 112 +#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0) +#define PIN_PD16__CANTX4 PINMUX_PIN(PIN_PD16, 1, 1) +#define PIN_PD16__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD16, 2, 1) + +#define PIN_PD17 113 +#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0) +#define PIN_PD17__CANRX4 PINMUX_PIN(PIN_PD17, 1, 1) +#define PIN_PD17__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD17, 2, 1) + +#define PIN_PD18 114 +#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0) +#define PIN_PD18__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD18, 2, 4) +#define PIN_PD18__CANTX1 PINMUX_PIN(PIN_PD18, 3, 2) +#define PIN_PD18__PCK4 PINMUX_PIN(PIN_PD18, 4, 2) + +#define PIN_PD19 115 +#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0) +#define PIN_PD19__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD19, 2, 4) +#define PIN_PD19__CANRX1 PINMUX_PIN(PIN_PD19, 3, 2) +#define PIN_PD19__PCK2 PINMUX_PIN(PIN_PD19, 4, 3) + +#define PIN_PD20 116 +#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0) +#define PIN_PD20__PFLEXCOM6_IO2 PINMUX_PIN(PIN_PD20, 2, 4) +#define PIN_PD20__I2SMCC1_MCK PINMUX_PIN(PIN_PD20, 3, 2) +#define PIN_PD20__PCK3 PINMUX_PIN(PIN_PD20, 4, 3) + +#define PIN_PD21 117 +#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0) +#define PIN_PD21__G1_TXCTL PINMUX_PIN(PIN_PD21, 1, 2) +#define PIN_PD21__FLEXCOM6_IO2 PINMUX_PIN(PIN_PD21, 2, 3) +#define PIN_PD21__TK1 PINMUX_PIN(PIN_PD21, 3, 1) + +#define PIN_PD22 118 +#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0) +#define PIN_PD22__G1_TX0 PINMUX_PIN(PIN_PD22, 1, 1) +#define PIN_PD22__FLEXCOM6_IO3 PINMUX_PIN(PIN_PD22, 2, 3) +#define PIN_PD22__TF1 PINMUX_PIN(PIN_PD22, 3, 1) + +#define PIN_PD23 119 +#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0) +#define PIN_PD23__G1_TX1 PINMUX_PIN(PIN_PD23, 1, 1) +#define PIN_PD23__FLEXCOM6_IO4 PINMUX_PIN(PIN_PD23, 2, 3) +#define PIN_PD23__TD1 PINMUX_PIN(PIN_PD23, 3, 1) + +#define PIN_PD24 120 +#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0) +#define PIN_PD24__G1_RXCTL PINMUX_PIN(PIN_PD24, 1, 1) +#define PIN_PD24__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD24, 2, 3) +#define PIN_PD24__RD1 PINMUX_PIN(PIN_PD24, 3, 1) +#define PIN_PD24__PDMC0_DS1 PINMUX_PIN(PIN_PD24, 5, 3) + +#define PIN_PD25 121 +#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0) +#define PIN_PD25__G1_MDC PINMUX_PIN(PIN_PD25, 1, 1) +#define PIN_PD25__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD25, 2, 3) +#define PIN_PD25__RK1 PINMUX_PIN(PIN_PD25, 3, 1) +#define PIN_PD25__PDMC0_CLK PINMUX_PIN(PIN_PD25, 5, 3) + +#define PIN_PD26 122 +#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0) +#define PIN_PD26__G1_MDIO PINMUX_PIN(PIN_PD26, 1, 1) +#define PIN_PD26__FLEXCOM7_IO4 PINMUX_PIN(PIN_PD26, 2, 2) +#define PIN_PD26__RF1 PINMUX_PIN(PIN_PD26, 3, 1) +#define PIN_PD26__I2SMCC1_DIN2 PINMUX_PIN(PIN_PD26, 4, 2) +#define PIN_PD26__PDMC0_DS0 PINMUX_PIN(PIN_PD26, 5, 3) + +#define PIN_PD27 123 +#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0) +#define PIN_PD27__G1_RX0 PINMUX_PIN(PIN_PD27, 1, 1) +#define PIN_PD27__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD27, 2, 2) +#define PIN_PD27__SPDIF_RX PINMUX_PIN(PIN_PD27, 3, 1) +#define PIN_PD27__I2SMCC1_DIN3 PINMUX_PIN(PIN_PD27, 4, 2) + +#define PIN_PD28 124 +#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0) +#define PIN_PD28__G1_RX1 PINMUX_PIN(PIN_PD28, 1, 1) +#define PIN_PD28__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD28, 2, 2) +#define PIN_PD28__SPDIF_TX PINMUX_PIN(PIN_PD28, 3, 1) +#define PIN_PD28__I2SMCC1_DIN1 PINMUX_PIN(PIN_PD28, 4, 2) + +#define PIN_PD29 125 +#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0) +#define PIN_PD29__G1_REFCK PINMUX_PIN(PIN_PD29, 1, 2) +#define PIN_PD29__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD29, 2, 2) +#define PIN_PD29__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PD29, 3, 2) + +#define PIN_PD30 126 +#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0) +#define PIN_PD30__G1_RX2 PINMUX_PIN(PIN_PD30, 1, 1) +#define PIN_PD30__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD30, 2, 2) +#define PIN_PD30__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PD30, 3, 2) +#define PIN_PD30__PDMC1_DS1 PINMUX_PIN(PIN_PD30, 4, 3) +#define PIN_PD30__G1_RXER PINMUX_PIN(PIN_PD30, 5, 2) + +#define PIN_PD31 127 +#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0) +#define PIN_PD31__G1_RX3 PINMUX_PIN(PIN_PD31, 1, 1) +#define PIN_PD31__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD31, 2, 2) +#define PIN_PD31__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PD31, 3, 3) +#define PIN_PD31__PDMC1_DS0 PINMUX_PIN(PIN_PD31, 4, 3) + +#define PIN_PE0 128 +#define PIN_PE0__GPIO PINMUX_PIN(PIN_PE0, 0, 0) +#define PIN_PE0__G1_TX2 PINMUX_PIN(PIN_PE0, 1, 1) +#define PIN_PE0__FLEXCOM5_IO2 PINMUX_PIN(PIN_PE0, 2, 2) +#define PIN_PE0__I2SMCC1_DIN0 PINMUX_PIN(PIN_PE0, 3, 2) +#define PIN_PE0__PDMC1_CLK PINMUX_PIN(PIN_PE0, 4, 3) + +#define PIN_PE1 129 +#define PIN_PE1__GPIO PINMUX_PIN(PIN_PE1, 0, 0) +#define PIN_PE1__G1_TX3 PINMUX_PIN(PIN_PE1, 1, 1) +#define PIN_PE1__FLEXCOM5_IO3 PINMUX_PIN(PIN_PE1, 2, 2) +#define PIN_PE1__I2SMCC1_WS PINMUX_PIN(PIN_PE1, 3, 2) +#define PIN_PE1__PDMC0_DS1 PINMUX_PIN(PIN_PE1, 4, 4) + +#define PIN_PE2 130 +#define PIN_PE2__GPIO PINMUX_PIN(PIN_PE2, 0, 0) +#define PIN_PE2__G1_RXCK PINMUX_PIN(PIN_PE2, 1, 1) +#define PIN_PE2__FLEXCOM5_IO1 PINMUX_PIN(PIN_PE2, 2, 2) +#define PIN_PE2__I2SMCC1_CK PINMUX_PIN(PIN_PE2, 3, 2) +#define PIN_PE2__PDMC0_CLK PINMUX_PIN(PIN_PE2, 4, 4) + +#define PIN_PE3 131 +#define PIN_PE3__GPIO PINMUX_PIN(PIN_PE3, 0, 0) +#define PIN_PE3__G1_TSUCOMP PINMUX_PIN(PIN_PE3, 1, 1) +#define PIN_PE3__FLEXCOM5_IO0 PINMUX_PIN(PIN_PE3, 2, 2) +#define PIN_PE3__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PE3, 3, 2) +#define PIN_PE3__PDMC0_DS0 PINMUX_PIN(PIN_PE3, 4, 4) + +#define PIN_PE4 132 +#define PIN_PE4__GPIO PINMUX_PIN(PIN_PE4, 0, 0) +#define PIN_PE4__LCDC_DAT0 PINMUX_PIN(PIN_PE4, 1, 1) +#define PIN_PE4__FLEXCOM2_IO2 PINMUX_PIN(PIN_PE4, 2, 1) +#define PIN_PE4__PWML0 PINMUX_PIN(PIN_PE4, 3, 2) +#define PIN_PE4__TIOA3 PINMUX_PIN(PIN_PE4, 4, 1) +#define PIN_PE4__I2SMCC0_DIN1 PINMUX_PIN(PIN_PE4, 5, 2) + +#define PIN_PE5 133 +#define PIN_PE5__GPIO PINMUX_PIN(PIN_PE5, 0, 0) +#define PIN_PE5__LCDC_DAT1 PINMUX_PIN(PIN_PE5, 1, 1) +#define PIN_PE5__FLEXCOM2_IO3 PINMUX_PIN(PIN_PE5, 2, 1) +#define PIN_PE5__PWMH0 PINMUX_PIN(PIN_PE5, 3, 2) +#define PIN_PE5__TIOB3 PINMUX_PIN(PIN_PE5, 4, 1) +#define PIN_PE5__I2SMCC0_DIN2 PINMUX_PIN(PIN_PE5, 5, 2) + +#define PIN_PE6 134 +#define PIN_PE6__GPIO PINMUX_PIN(PIN_PE6, 0, 0) +#define PIN_PE6__LCDC_DAT2 PINMUX_PIN(PIN_PE6, 1, 1) +#define PIN_PE6__FLEXCOM2_IO4 PINMUX_PIN(PIN_PE6, 2, 1) +#define PIN_PE6__PWML1 PINMUX_PIN(PIN_PE6, 3, 2) +#define PIN_PE6__TCLK3 PINMUX_PIN(PIN_PE6, 4, 1) +#define PIN_PE6__I2SMCC0_DIN3 PINMUX_PIN(PIN_PE6, 5, 2) + +#define PIN_PE7 135 +#define PIN_PE7__GPIO PINMUX_PIN(PIN_PE7, 0, 0) +#define PIN_PE7__LCDC_DAT3 PINMUX_PIN(PIN_PE7, 1, 1) +#define PIN_PE7__FLEXCOM2_IO5 PINMUX_PIN(PIN_PE7, 2, 1) +#define PIN_PE7__PWMH1 PINMUX_PIN(PIN_PE7, 3, 2) +#define PIN_PE7__TIOA4 PINMUX_PIN(PIN_PE7, 4, 1) +#define PIN_PE7__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PE7, 5, 2) + +#define PIN_PE8 136 +#define PIN_PE8__GPIO PINMUX_PIN(PIN_PE8, 0, 0) +#define PIN_PE8__LCDC_DAT4 PINMUX_PIN(PIN_PE8, 1, 1) +#define PIN_PE8__FLEXCOM2_IO0 PINMUX_PIN(PIN_PE8, 2, 1) +#define PIN_PE8__PWML2 PINMUX_PIN(PIN_PE8, 3, 2) +#define PIN_PE8__TIOB4 PINMUX_PIN(PIN_PE8, 4, 1) +#define PIN_PE8__I2SMCC0_CK PINMUX_PIN(PIN_PE8, 5, 2) + +#define PIN_PE9 137 +#define PIN_PE9__GPIO PINMUX_PIN(PIN_PE9, 0, 0) +#define PIN_PE9__LCDC_DAT5 PINMUX_PIN(PIN_PE9, 1, 1) +#define PIN_PE9__FLEXCOM2_IO1 PINMUX_PIN(PIN_PE9, 2, 1) +#define PIN_PE9__PWMH2 PINMUX_PIN(PIN_PE9, 3, 2) +#define PIN_PE9__TCLK4 PINMUX_PIN(PIN_PE9, 4, 1) +#define PIN_PE9__I2SMCC0_WS PINMUX_PIN(PIN_PE9, 5, 2) + +#define PIN_PE10 138 +#define PIN_PE10__GPIO PINMUX_PIN(PIN_PE10, 0, 0) +#define PIN_PE10__LCDC_DAT6 PINMUX_PIN(PIN_PE10, 1, 1) +#define PIN_PE10__FLEXCOM2_IO6 PINMUX_PIN(PIN_PE10, 2, 1) +#define PIN_PE10__PWML3 PINMUX_PIN(PIN_PE10, 3, 2) +#define PIN_PE10__TIOA5 PINMUX_PIN(PIN_PE10, 4, 1) +#define PIN_PE10__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PE10, 5, 2) + +#define PIN_PE11 139 +#define PIN_PE11__GPIO PINMUX_PIN(PIN_PE11, 0, 0) +#define PIN_PE11__LCDC_DAT7 PINMUX_PIN(PIN_PE11, 1, 1) +#define PIN_PE11__PWMH3 PINMUX_PIN(PIN_PE11, 3, 2) +#define PIN_PE11__TIOB5 PINMUX_PIN(PIN_PE11, 4, 1) +#define PIN_PE11__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PE11, 5, 2) + +#define PIN_PE12 140 +#define PIN_PE12__GPIO PINMUX_PIN(PIN_PE12, 0, 0) +#define PIN_PE12__LCDC_DEN PINMUX_PIN(PIN_PE12, 1, 1) +#define PIN_PE12__PCK3 PINMUX_PIN(PIN_PE12, 2, 4) +#define PIN_PE12__PWMEXTRG0 PINMUX_PIN(PIN_PE12, 3, 2) +#define PIN_PE12__TCLK5 PINMUX_PIN(PIN_PE12, 4, 1) +#define PIN_PE12__I2SMCC0_DIN0 PINMUX_PIN(PIN_PE12, 5, 2) + +#define PIN_PE13 141 +#define PIN_PE13__GPIO PINMUX_PIN(PIN_PE13, 0, 0) +#define PIN_PE13__LCDC_PCK PINMUX_PIN(PIN_PE13, 1, 1) +#define PIN_PE13__PCK4 PINMUX_PIN(PIN_PE13, 2, 3) +#define PIN_PE13__PWMEXTRG1 PINMUX_PIN(PIN_PE13, 3, 2) +#define PIN_PE13__I2SMCC0DOUT0 PINMUX_PIN(PIN_PE13, 5, 2) diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi new file mode 100644 index 000000000000..b6710ccd4c36 --- /dev/null +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC + * + * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Ryan Wanner <Ryan.Wanner@microchip.com> + * + */ + +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/at91-usart.h> + +/ { + model = "Microchip SAMA7D65 family SoC"; + compatible = "microchip,sama7d65"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + reg = <0x0>; + device_type = "cpu"; + clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>; + clock-names = "cpu"; + }; + }; + + clocks { + main_xtal: clock-mainxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + slow_xtal: clock-slowxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + sfrbu: sfr@e0008000 { + compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; + reg = <0xe0008000 0x20>; + }; + + pioa: pinctrl@e0014000 { + compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl"; + reg = <0xe0014000 0x800>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pmc: clock-controller@e0018000 { + compatible = "microchip,sama7d65-pmc", "syscon"; + reg = <0xe0018000 0x200>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + ps_wdt: watchdog@e001d000 { + compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt"; + reg = <0xe001d000 0x30>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 0>; + }; + + reset_controller: reset-controller@e001d100 { + compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc"; + reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + + shdwc: poweroff@e001d200 { + compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon"; + reg = <0xe001d200 0x20>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + clk32k: clock-controller@e001d500 { + compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc"; + reg = <0xe001d500 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + rtc: rtc@e001d800 { + compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc"; + reg = <0xe001d800 0x30>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 1>; + }; + + chipid@e0020000 { + compatible = "microchip,sama7d65-chipid"; + reg = <0xe0020000 0x8>; + }; + + dma2: dma-controller@e1200000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1200000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "dma_clk"; + dma-requests = <0>; + status = "disabled"; + }; + + sdmmc1: mmc@e1208000 { + compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci"; + reg = <0xe1208000 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 76>; + assigned-clock-rates = <200000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>; + status = "disabled"; + }; + + dma0: dma-controller@e1610000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1610000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + dma1: dma-controller@e1614000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1614000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + pit64b0: timer@e1800000 { + compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xe1800000 0x100>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>; + clock-names = "pclk", "gclk"; + }; + + pit64b1: timer@e1804000 { + compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xe1804000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>; + clock-names = "pclk", "gclk"; + }; + + flx6: flexcom@e2020000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2020000 0x200>; + ranges = <0x0 0xe2020000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + status = "disabled"; + + uart6: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx10: flexcom@e2824000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2824000 0x200>; + ranges = <0x0 0xe2824000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c10: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + gic: interrupt-controller@e8c11000 { + compatible = "arm,cortex-a7-gic"; + reg = <0xe8c11000 0x1000>, + <0xe8c12000 0x2000>; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + }; + }; +}; diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi index 75778be126a3..17bcdcf0cf4a 100644 --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -272,7 +272,7 @@ compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; clk32k: clock-controller@e001d050 { diff --git a/arch/arm/boot/dts/microchip/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts index ef6d586ce887..f0f2a787d669 100644 --- a/arch/arm/boot/dts/microchip/tny_a9260.dts +++ b/arch/arm/boot/dts/microchip/tny_a9260.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board + * tny_a9260.dts - Device Tree file for Calao TNY A9260 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi index 70e5635c78ed..4d4377f51bec 100644 --- a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board + * tny_a9260_common.dtsi - Device Tree file for Calao TNY A926x board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts index 62b7d9f9a926..3dd48b3e06da 100644 --- a/arch/arm/boot/dts/microchip/tny_a9263.dts +++ b/arch/arm/boot/dts/microchip/tny_a9263.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * usb_a9263.dts - Device Tree file for Calao USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts index 118d766a1265..cebd5696a2c1 100644 --- a/arch/arm/boot/dts/microchip/tny_a9g20.dts +++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board + * tny_a9g20.dts - Device Tree file for Calao TNY A9G20 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts index 66f8da89007d..e7f7b259ccf3 100644 --- a/arch/arm/boot/dts/microchip/usb_a9260.dts +++ b/arch/arm/boot/dts/microchip/usb_a9260.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9260.dts - Device Tree file for Caloa USB A9260 board + * usb_a9260.dts - Device Tree file for Calao USB A9260 board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi index 8744b5f6f792..8c3530638c6d 100644 --- a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a926x.dts - Device Tree file for Caloa USB A926x board + * usb_a926x.dts - Device Tree file for Calao USB A926x board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -111,7 +111,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -122,17 +122,14 @@ user_led { label = "user_led"; - gpios = <&pioB 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; }; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user-pb { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts index 45745915b2e1..60d7936dc562 100644 --- a/arch/arm/boot/dts/microchip/usb_a9263.dts +++ b/arch/arm/boot/dts/microchip/usb_a9263.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * usb_a9263.dts - Device Tree file for Calao USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -9,7 +9,7 @@ / { model = "Calao USB A9263"; - compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9"; + compatible = "calao,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9"; chosen { bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; @@ -139,7 +139,7 @@ }; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { num-ports = <2>; status = "okay"; }; @@ -151,16 +151,13 @@ user_led { label = "user_led"; gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; }; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user-pb { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi index 08d58081201a..5b1d80c0ab26 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi @@ -65,28 +65,26 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb1 { + button-user-pb1 { label = "user_pb1"; gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; - user_pb2 { + button-user-pb2 { label = "user_pb2"; gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; - user_pb3 { + button-user-pb3 { label = "user_pb3"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; - user_pb4 { + button-user-pb4 { label = "user_pb4"; gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts index 2f667b083e81..a2f748141d4b 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20.dts +++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi index 7d10b36db1ee..f1946e0996b7 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts index f65712015d40..4d104797176c 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts +++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board + * usb_a9g20_lpw.dts - Device Tree file for Calao USB A9G20 Low Power board * * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -16,7 +16,7 @@ spi1: spi@fffcc000 { cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; status = "okay"; - mmc-slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; diff --git a/arch/arm/boot/dts/nspire/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi index a6e9cbf51524..0ee53d3ecd54 100644 --- a/arch/arm/boot/dts/nspire/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi @@ -55,7 +55,7 @@ }; / { - memory { + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x2000000>; /* 32 MB */ }; diff --git a/arch/arm/boot/dts/nspire/nspire-cx.dts b/arch/arm/boot/dts/nspire/nspire-cx.dts index 29f0181e5b38..debeff0ec010 100644 --- a/arch/arm/boot/dts/nspire/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire/nspire-cx.dts @@ -122,7 +122,7 @@ model = "TI-NSPIRE CX"; compatible = "ti,nspire-cx"; - memory { + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi index d56fef7250db..95588b716c6f 100644 --- a/arch/arm/boot/dts/nspire/nspire.dtsi +++ b/arch/arm/boot/dts/nspire/nspire.dtsi @@ -170,9 +170,12 @@ }; watchdog: watchdog@90060000 { - compatible = "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x90060000 0x1000>; interrupts = <3>; + clocks = <&apb_pclk>, <&apb_pclk>; + clock-names = "wdog_clk", "apb_pclk"; + status = "disabled"; }; rtc: rtc@90090000 { diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts index 9f64c85e1c20..c3501786d600 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts @@ -661,7 +661,7 @@ clock-frequency = <100000>; status = "okay"; - mb_fru@50 { + eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; @@ -704,7 +704,7 @@ reg = <0x5d>; status = "okay"; }; - fan_fru@51 { + eeprom@51 { compatible = "atmel,24c64"; reg = <0x51>; }; @@ -714,7 +714,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - hsbp_fru@52 { + eeprom@52 { compatible = "atmel,24c64"; reg = <0x52>; status = "okay"; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts index 5787ae95d3b4..886a87dfcd0d 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts @@ -525,50 +525,50 @@ }; }; - i2c-bus@4 { + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; // INLET1_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; - i2c-bus@5 { + i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; // OUTLET1_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; - i2c-bus@6 { + i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; // OUTLET2_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; - i2c-bus@7 { + i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; // OUTLET3_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; @@ -580,7 +580,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@2 { + i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -620,7 +620,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@0 { + i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -632,7 +632,7 @@ }; }; - i2c-bus@1 { + i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -691,49 +691,49 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@3 { + i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; // M2_ZONE_T - lm75@28 { - compatible = "ti,lm75"; + temperature-sensor@28 { + compatible = "national,lm75"; reg = <0x28>; }; }; - i2c-bus@4 { + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; // BATT_ZONE_T - lm75@29 { - compatible = "ti,lm75"; + temperature-sensor@29 { + compatible = "national,lm75"; reg = <0x29>; }; }; - i2c-bus@5 { + i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; // NBM1_ZONE_T - lm75@28 { - compatible = "ti,lm75"; + temperature-sensor@28 { + compatible = "national,lm75"; reg = <0x28>; }; }; - i2c-bus@6 { + i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; // NBM2_ZONE_T - lm75@29 { - compatible = "ti,lm75"; + temperature-sensor@29 { + compatible = "national,lm75"; reg = <0x29>; }; }; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts index f53d45fa1de8..bcdcb30c7bf6 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts @@ -198,7 +198,7 @@ clock-frequency = <100000>; status = "okay"; lm75@48 { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x48>; status = "okay"; }; @@ -208,8 +208,8 @@ &i2c1 { clock-frequency = <100000>; status = "okay"; - lm75@48 { - compatible = "lm75"; + temperature-sensor@48 { + compatible = "national,lm75"; reg = <0x48>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts index baa39d0c1032..f67ede148209 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts @@ -215,43 +215,43 @@ reg = <0x70>; i2c-mux-idle-disconnect; - i2c_slot1a: i2c-bus@0 { + i2c_slot1a: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; - i2c_slot1b: i2c-bus@1 { + i2c_slot1b: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; - i2c_slot2a: i2c-bus@2 { + i2c_slot2a: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; }; - i2c_slot2b: i2c-bus@3 { + i2c_slot2b: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; }; - i2c_slot3: i2c-bus@4 { + i2c_slot3: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; }; - i2c_slot4: i2c-bus@5 { + i2c_slot4: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; }; - i2c_slot5: i2c-bus@6 { + i2c_slot5: i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; @@ -265,24 +265,24 @@ #size-cells = <0>; i2c-mux-idle-disconnect; - i2c_m2_s1: i2c-bus@0 { + i2c_m2_s1: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; - i2c_m2_s2: i2c-bus@1 { + i2c_m2_s2: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; - i2c_m2_s3: i2c-bus@2 { + i2c_m2_s3: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; }; - i2c_m2_s4: i2c-bus@3 { + i2c_m2_s4: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; @@ -824,7 +824,7 @@ reg = <0x4a>; status = "okay"; }; - m24128_fru@51 { + eeprom@51 { compatible = "atmel,24c128"; reg = <0x51>; pagesize = <64>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts index b78c116cbc18..edb907f740bf 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts @@ -34,7 +34,7 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins>; - uid { + button-uid { label = "UID button"; linux,code = <KEY_HOME>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; @@ -46,12 +46,12 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - uid { + led-uid { label = "UID"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - heartbeat { + led-heartbeat { label = "heartbeat"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts index 763ab812eb87..f02e2cf65fe8 100644 --- a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts +++ b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts @@ -57,10 +57,24 @@ }; host1x@50000000 { + hdmi@54280000 { + status = "okay"; + + hdmi-supply = <&hdmi_5v0_sys>; + pll-supply = <&avdd_hdmi_pll>; + vdd-supply = <&avdd_hdmi>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&connector_in>; + }; + }; + }; + dsi@54300000 { status = "okay"; - avdd-dsi-csi-supply = <&tps65913_ldo2>; + avdd-dsi-csi-supply = <&avdd_dsi_csi>; nvidia,ganged-mode = <&dsib>; @@ -70,7 +84,7 @@ link2 = <&panel_secondary>; - power-supply = <&vdd_lcd>; + power-supply = <&dvdd_1v8_lcd>; backlight = <&backlight>; }; }; @@ -78,7 +92,7 @@ dsi@54400000 { status = "okay"; - avdd-dsi-csi-supply = <&tps65913_ldo2>; + avdd-dsi-csi-supply = <&avdd_dsi_csi>; panel_secondary: panel@0 { compatible = "sharp,lq101r1sx01"; @@ -87,66 +101,377 @@ }; }; + vde@6001a000 { + assigned-clocks = <&tegra_car TEGRA114_CLK_VDE>; + assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>; + assigned-clock-rates = <408000000>; + }; + pinmux@70000868 { - asus_pad_ec_default: pinmux-asus-pad-ec-default { - ec-interrupt { - nvidia,pins = "kb_col5_pq5"; - nvidia,function = "kbc"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* WLAN SDIO pinmux */ + sdmmc1-clk { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sdmmc1-cmd { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ec-request { - nvidia,pins = "kb_col2_pq2"; - nvidia,function = "kbc"; + wlan-power { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - backlight_default: pinmux-backlight-default { - backlight-enable { - nvidia,pins = "gmi_ad10_ph2"; + wlan-reset { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + wlan-host-wake { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + wlan-3v3-com { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* UART-A pinmux */ + uarta-cts { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uarta-rts { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GNSS UART-B pinmux */ + uartb-cts { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartb-rts { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + uartb-rxd { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartb-txd { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Bluetooth UART-C pinmux */ + uartc-cts-rxd { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartc-rts-txd { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-shutdown { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-dev-wake { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-host-wake { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + bt-pcm-dap4-out { + nvidia,pins = "dap4_fs_pp4", + "dap4_dout_pp6", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-pcm-dap4-in { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* UART-D pinmux */ + uartd-cts { + nvidia,pins = "gmi_a17_pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartd-rts { + nvidia,pins = "gmi_a16_pj7", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* MicroSD pinmux */ + sdmmc3-clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sdmmc3-data { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_cd_n_pv2", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + microsd-pwr { + nvidia,pins = "gmi_clk_pk1"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - codec_default: pinmux-codec-default { - interrupt { - nvidia,pins = "gpio_w2_aud_pw2", - "gpio_w3_aud_pw3"; - nvidia,function = "spi6"; + /* EMMC pinmux */ + sdmmc4-clk-cmd { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sdmmc4-data { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ldo1-en { - nvidia,pins = "sdmmc1_wp_n_pv3"; - nvidia,function = "sdmmc1"; + /* I2C pinmux */ + gen1-i2c { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + gen2-i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + cam-i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + ddc-i2c { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + pwr-i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + /* SPI pinmux */ + spi1-out { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default { - ulpi_data4_po5 { + spi1-in { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + spi2 { + nvidia,pins = "ulpi_data4_po5", + "ulpi_data7_po0"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + spi4-out { + nvidia,pins = "gmi_ad6_pg6", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + spi4-in { + nvidia,pins = "gmi_ad5_pg5", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* GPIO keys pinmux */ + hall-switch { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - gpio_keys_default: pinmux-gpio-keys-default { - power { + lineout-switch { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + power-key { nvidia,pins = "kb_col0_pq0"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -154,111 +479,722 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - volume { + volume-keys { nvidia,pins = "kb_row1_pr1", - "kb_row2_pr2"; + "kb_row2_pr2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - hp_det_default: pinmux-hp-det-default { - gmi_iordy_pi5 { - nvidia,pins = "kb_row7_pr7"; - nvidia,function = "rsvd2"; + /* Sensors pinmux */ + nct-irq { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - imu_default: pinmux-imu-default { - kb_row3_pr3 { + mpu-irq { nvidia,pins = "kb_row3_pr3"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - pwm_default: pinmux-pwm-default { - gmi_ad9_ph1 { + /* HDMI pinmux */ + hdmi-hpd { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + hdmi-en { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + hdmi-cec { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LED pinmux */ + backlight-pwm { nvidia,pins = "gmi_ad9_ph1"; nvidia,function = "pwm1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - /* XXX make this something more sensible */ - pwm_sleep: pinmux-pwm-sleep { - gmi_ad9_ph1 { - nvidia,pins = "gmi_ad9_ph1"; + backlight-en { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Touchscreen pinmux */ + touch-irq { + nvidia,pins = "gmi_cs4_n_pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + touch-rst { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + touch-pwr { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + touch-vio { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* AUDIO pinmux */ + audio-ldo1 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + hp-detect { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s0-in { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s0-out { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + dap-i2s1-in { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s1-out { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + dap-i2s2-in { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s2-out { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + spdif-in { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + spdif-out { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* AsusEC pinmux */ + ec-irq { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ec-req { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + hotplug-i2c { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ps2-irq { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kbd-irq { + nvidia,pins = "gmi_cs0_n_pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dvfs-pin { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Core pinmux */ + clk-32k-out { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sys-clk-req { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + core-pwr-req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + cpu-pwr-req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pwr-int-n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + clk-32k-in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + reset-out-n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* ULPI pinmux */ + ulpi-data0-6 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ulpi-data1-5 { + nvidia,pins = "ulpi_data1_po2", + "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ulpi-data2-3 { + nvidia,pins = "ulpi_data2_po3", + "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PORT V */ + pv0-gpio { + nvidia,pins = "pv0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pv1-gpio { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PORT U */ + pu0-gpio { + nvidia,pins = "pu0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pu2-gpio { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PWM pinmux */ + pwm0 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pwm1 { + nvidia,pins = "pu4"; nvidia,function = "pwm1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - sdmmc3_default: pinmux-sdmmc3-default { - drive_sdio3 { - nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,pull-down-strength = <22>; - nvidia,pull-up-strength = <36>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + /* EXTPERIPH pinmux */ + clk1-out { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6"; - nvidia,function = "sdmmc3"; + clk2-out { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + clk3-out { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + clk1-req { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GMI pinmux */ + gmi-wp-n { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cmd_pa7 { - nvidia,pins = "sdmmc3_cmd_pa7", - "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4", - "kb_col4_pq4", - "sdmmc3_clk_lb_out_pee4", - "sdmmc3_clk_lb_in_pee5", - "sdmmc3_cd_n_pv2"; - nvidia,function = "sdmmc3"; + gmi-adv { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default { - gmi_clk_pk1 { - nvidia,pins = "gmi_clk_pk1"; + gmi-ad0-ad1 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gmi-ad2-ad3 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-iordy { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-a18 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-wait { + nvidia,pins = "gmi_wait_pi7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gmi-cs6-n { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gmi-cs7-n { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-dqs-p { + nvidia,pins = "gmi_dqs_p_pj3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-cs2-ad { + nvidia,pins = "gmi_cs2_n_pk3", + "gmi_ad14_ph6", + "gmi_ad15_ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-cs4-clk { + nvidia,pins = "gmi_cs4_n_pk2", + "gmi_clk_lb"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-ad11 { + nvidia,pins = "gmi_ad11_ph3"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - vdd_lcd_default: pinmux-vdd-lcd-default { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4"; - nvidia,function = "sdmmc4"; + gmi-cs1-oe { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-ad4 { + nvidia,pins = "gmi_ad4_pg4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-ad13 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-rst-n { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* PORT CC */ + pcc-gpio { + nvidia,pins = "pcc1", "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PORT BB */ + pbb3-gpio { + nvidia,pins = "pbb3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pbb4-5-6-gpio { + nvidia,pins = "pbb4", "pbb5", "pbb6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pbb7-gpio { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* KBC pinmux */ + kb-r0-c1 { + nvidia,pins = "kb_row0_pr0", + "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-row4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-row5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-row6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-r8-c3 { + nvidia,pins = "kb_row8_ps0", + "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* VI pinmux */ + cam-mclk { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + + /* AUD pinmux */ + gpio-x4-aud { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gpio-x1-aud { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gpio-x3-aud { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gpio-x6-aud { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + usb-vbus { + nvidia,pins = "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GPIO power/drive control */ + drive-sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + + drive-sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + + drive-gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; }; }; @@ -267,7 +1203,33 @@ }; serial@70006200 { - /* Bluetooth */ + compatible = "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + bluetooth { + compatible = "brcm,bcm4334-bt"; + max-speed = <4000000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>; + + vbat-supply = <&vdd_3v3_com>; + vddio-supply = <&vdd_1v8_vio>; + }; }; serial@70006300 { @@ -278,10 +1240,6 @@ pwm@7000a000 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pwm_default>; - pinctrl-1 = <&pwm_sleep>; }; i2c@7000c000 { @@ -292,27 +1250,35 @@ compatible = "asahi-kasei,ak09911"; reg = <0xc>; - vdd-supply = <&vdd_3v3_sys>; + /* no DRDY (polling) */ + + vdd-supply = <&vdd_2v85_sen>; + vid-supply = <&vdd_1v8_vio>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0","-1"; }; rt5639: audio-codec@1c { compatible = "realtek,rt5639"; reg = <0x1c>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; - - realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&codec_default>; + clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "mclk"; }; temp_sensor: temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; - vcc-supply = <&vdd_3v3_sys>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&vdd_1v8_vio>; #thermal-sensor-cells = <1>; }; @@ -323,12 +1289,12 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>; + vdd-supply = <&vdd_2v85_sen>; + vddio-supply = <&vdd_1v8_vio>; + mount-matrix = "0", "-1", "0", "1", "0", "0", "0", "0", "1"; - - pinctrl-names = "default"; - pinctrl-0 = <&imu_default>; }; }; @@ -339,6 +1305,8 @@ power-sensor@44 { compatible = "ti,ina230"; reg = <0x44>; + + shunt-resistor = <5000>; }; }; @@ -350,12 +1318,13 @@ compatible = "dynaimage,al3320a"; reg = <0x1c>; - vdd-supply = <&vdd_3v3_sys>; + vdd-supply = <&vdd_1v8_vio>; }; }; - i2c@7000c700 { - /* HDMI DDC */ + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <10000>; }; i2c@7000d000 { @@ -372,12 +1341,36 @@ ti,system-power-controller; + palmas_gpadc: adc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 IRQ_TYPE_NONE>, + <16 IRQ_TYPE_NONE>, + <17 IRQ_TYPE_NONE>; + + ti,channel0-current-microamp = <5>; + ti,channel3-current-microamp = <400>; + ti,enable-extended-delay; + + #io-channel-cells = <1>; + }; + + palmas_extcon: extcon { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + }; + palmas_gpio: gpio { compatible = "ti,palmas-gpio"; gpio-controller; #gpio-cells = <2>; }; + palmas_clk32kg@0 { + compatible = "ti,palmas-clk32kg"; + #clock-cells = <0>; + }; + pinmux { compatible = "ti,tps65913-pinctrl"; ti,palmas-enable-dvfs1; @@ -441,17 +1434,18 @@ pmic { compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; - ldo1-in-supply = <&tps65913_smps7>; - ldo2-in-supply = <&tps65913_smps7>; - ldo4-in-supply = <&tps65913_smps8>; - ldo5-in-supply = <&tps65913_smps9>; - ldo6-in-supply = <&tps65913_smps9>; - ldo7-in-supply = <&tps65913_smps9>; - ldo9-in-supply = <&tps65913_smps9>; + ldo1-in-supply = <&vddio_ddr>; + ldo2-in-supply = <&vddio_ddr>; + ldo4-in-supply = <&vdd_1v8_vio>; + ldo5-in-supply = <&vcore_emmc>; + ldo6-in-supply = <&vcore_emmc>; + ldo7-in-supply = <&vcore_emmc>; + ldo9-in-supply = <&vcore_emmc>; + ldoln-in-supply = <&vdd_smps10_out2>; regulators { - tps65913_smps123: smps123 { - regulator-name = "vdd-cpu"; + vdd_cpu: smps123 { + regulator-name = "vdd_cpu"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -460,8 +1454,8 @@ ti,mode-sleep = <3>; }; - tps65913_smps45: smps45 { - regulator-name = "vdd-core"; + vdd_core: smps45 { + regulator-name = "vdd_core"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; @@ -469,101 +1463,95 @@ ti,roof-floor = <3>; }; - smps6 { - regulator-name = "va-lcd-hv"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + /* smps6 disabled */ - tps65913_smps7: smps7 { - regulator-name = "vdd-ddr"; + vddio_ddr: smps7 { + regulator-name = "vddio_ddr"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; - tps65913_smps8: smps8 { - regulator-name = "vdd-1v8"; + vdd_1v8_vio: smps8 { + regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; - tps65913_smps9: smps9 { - regulator-name = "vdd-sd"; + vcore_emmc: smps9 { + regulator-name = "vdd_emmc"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; - regulator-always-on; + regulator-boot-on; }; - tps65913_smps10_out1: smps10_out1 { - regulator-name = "vd-smps10-out1"; + smps10_out1 { + regulator-name = "vd_smps10_out1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; }; - tps65913_smps10_out2: smps10_out2 { - regulator-name = "vd-smps10-out2"; + vdd_smps10_out2: smps10_out2 { + regulator-name = "vd_smps10_out2"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; }; - tps65913_ldo1: ldo1 { - regulator-name = "vdd-hdmi-pll"; + avdd_hdmi_pll: ldo1 { + regulator-name = "avdd_hdmi_pll"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; regulator-always-on; + regulator-boot-on; ti,roof-floor = <3>; }; - tps65913_ldo2: ldo2 { - regulator-name = "vdd-2v8-dsi-csi"; + avdd_dsi_csi: ldo2 { + regulator-name = "avdd_dsi_csi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-boot-on; }; ldo3 { - regulator-name = "vpp-fuse"; + regulator-name = "vpp_fuse"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo4 { - regulator-name = "vdd-1v2-cam"; + vdd_1v2_cam: ldo4 { + regulator-name = "vdd_1v2_cam"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo5 { - regulator-name = "vdd-cam"; + avdd_2v8_cam: ldo5 { + regulator-name = "avdd_cam2"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - ldo6 { - regulator-name = "vdd-dev"; + vdd_2v85_sen: ldo6 { + regulator-name = "vdd_dev"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-boot-on; }; - ldo7 { - regulator-name = "vdd-2v8-cam"; + avdd_2v8_af: ldo7 { + regulator-name = "avdd_2v8_cam"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - tps65913_ldo8: ldo8 { - regulator-name = "vdd-rtc"; + ldo8 { + regulator-name = "vdd_rtc"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <950000>; regulator-always-on; @@ -571,23 +1559,24 @@ ti,enable-ldo8-tracking; }; - tps65913_ldo9: ldo9 { - regulator-name = "vdd-sdmmc"; - regulator-min-microvolt = <1800000>; + vddio_usd: ldo9 { + regulator-name = "vddio_usd"; + /* min voltage of 1.8v is not stable */ + regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; }; - tps65913_ldoln: ldoln { - regulator-name = "vdd-hdmi"; + avdd_hdmi: ldoln { + regulator-name = "avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; }; - ldousb { - regulator-name = "vdd-usb"; + avdd_usb: ldousb { + regulator-name = "avdd_usb"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; regulator-boot-on; }; }; @@ -596,19 +1585,89 @@ rtc { compatible = "ti,palmas-rtc"; interrupt-parent = <&palmas>; - interrupts = <8 0>; + interrupts = <8 IRQ_TYPE_NONE>; }; }; }; + pmc@7000e400 { + status = "okay"; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <300>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <2000>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + /* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x58>; + nvidia,reg-addr = <0xA0>; + nvidia,reg-data = <0x00>; + }; + }; + ahub@70080000 { - i2s@70080300 { + /* HIFI CODEC (i2s1) */ + i2s@70080400 { status = "okay"; }; + + /* BT SCO (i2s3) */ + i2s@70080600 { + status = "okay"; + }; + }; + + brcm_wifi_pwrseq: pwrseq-wifi { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; }; + /* WiFi */ mmc@78000000 { - /* WiFi */ + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA114_CLK_SDMMC1>; + assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>; + assigned-clock-rates = <82000000>; + + max-frequency = <82000000>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + sd-uhs-ddr50; + mmc-ddr-1_8v; + + power-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + + nvidia,default-tap = <0x2>; + nvidia,default-trim = <0x2>; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_com>; + vqmmc-supply = <&vdd_1v8_vio>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; }; /* MicroSD card */ @@ -621,33 +1680,38 @@ nvidia,default-tap = <0x3>; nvidia,default-trim = <0x3>; - vmmc-supply = <&vdd_usd>; - vqmmc-supply = <&tps65913_ldo9>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc3_default>; + vmmc-supply = <&vdd_2v9_usd>; + vqmmc-supply = <&vddio_usd>; }; + /* eMMC */ mmc@78000600 { - /* eMMC */ + status = "okay"; + bus-width = <8>; + + non-removable; + mmc-ddr-1_8v; + + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8_vio>; }; + /* Peripheral USB via ASUS connector */ usb@7d000000 { compatible = "nvidia,tegra114-udc"; status = "okay"; dr_mode = "peripheral"; - - /* Peripheral USB via ASUS connector */ }; usb-phy@7d000000 { status = "okay"; + dr_mode = "peripheral"; + vbus-supply = <&avdd_usb>; }; + /* Host USB via dock */ usb@7d008000 { status = "okay"; - - /* Host USB via dock */ }; usb-phy@7d008000 { @@ -658,16 +1722,12 @@ backlight: backlight { compatible = "pwm-backlight"; - enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - power-supply = <&vdd_5v0_sys>; + power-supply = <&vdd_3v7_bl>; pwms = <&pwm 1 1000000>; brightness-levels = <1 255>; num-interpolated-steps = <254>; default-brightness-level = <224>; - - pinctrl-names = "default"; - pinctrl-0 = <&backlight_default>; }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ @@ -678,13 +1738,22 @@ clock-output-names = "pmic-oscillator"; }; - gpio-hall-sensor { - compatible = "gpio-keys"; + connector { + compatible = "hdmi-connector"; + type = "d"; - label = "GPIO Hall Effect Sensor"; + hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + ddc-i2c-bus = <&hdmi_ddc>; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_hall_sensor_default>; + port { + connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + extcon-keys { + compatible = "gpio-keys"; switch-hall-sensor { label = "Hall Effect Sensor"; @@ -694,17 +1763,20 @@ linux,can-disable; wakeup-source; }; + + switch-lineout-detect { + label = "Audio dock line-out detect"; + gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LINEOUT_INSERT>; + debounce-interval = <10>; + }; }; gpio-keys { compatible = "gpio-keys"; - label = "GPIO Buttons"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_default>; - - button-power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -712,14 +1784,14 @@ wakeup-source; }; - button-volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <10>; }; - button-volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -739,13 +1811,16 @@ "Speakers", "SPORN", "Speakers", "SPOLP", "Speakers", "SPOLN", - "Mic Jack", "MICBIAS1", - "IN2P", "Mic Jack"; + "IN1P", "Mic Jack", + "IN1N", "Mic Jack", + "DMIC1", "Int Mic", + "DMIC2", "Int Mic"; - nvidia,i2s-controller = <&tegra_i2s0>; + nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&rt5639>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>; + nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; clocks = <&tegra_car TEGRA114_CLK_PLL_A>, <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, @@ -757,14 +1832,11 @@ assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, <&tegra_car TEGRA114_CLK_EXTERN1>; - - pinctrl-names = "default"; - pinctrl-0 = <&hp_det_default>; }; vdd_5v0_sys: regulator-5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vdd_5v0"; + regulator-name = "vdd_5v0_sys"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; @@ -773,37 +1845,119 @@ vdd_3v3_sys: regulator-3v3-sys { compatible = "regulator-fixed"; - regulator-name = "vdd_3v3"; + regulator-name = "vdd_3v3_sys"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; }; - vdd_lcd: regulator-vdd-lcd { + dvdd_1v8_lcd: regulator-vdd-lcd { compatible = "regulator-fixed"; - regulator-name = "vdd_lcd_1v8"; + regulator-name = "dvdd_1v8_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - vin-supply = <&tps65913_smps8>; + regulator-boot-on; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_1v8_vio>; + }; + + vdd_3v7_bl: regulator-bl-en { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v7_bl"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_lcd_default>; + hdmi_5v0_sys: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_smps10_out2>; }; - vdd_usd: regulator-vdd-usd { + vdd_2v9_usd: regulator-vdd-usd { compatible = "regulator-fixed"; regulator-name = "vdd_sd_slot"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; - vin-supply = <&tps65913_smps9>; - enable-active-high; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vcore_emmc>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc3_vdd_default>; + vdd_1v8_cam: regulator-cam-vio { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + gpio = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8_vio>; + }; + + vdd_1v2_xusb: regulator-xusb-vio { + compatible = "regulator-fixed"; + regulator-name = "avddio_1v2_xusb"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + gpio = <&palmas_gpio 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_3v3_xusb: regulator-xusb-vdd { + compatible = "regulator-fixed"; + regulator-name = "hvdd_3v3_xusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_3v3_com: regulator-com { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_touch: regulator-touch-pwr { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_touch"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_1v8_touch: regulator-touch-vio { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_touch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; }; }; diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi index 86f14e2fd29f..4caf2073c556 100644 --- a/arch/arm/boot/dts/nvidia/tegra114.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi @@ -139,7 +139,7 @@ reg = <0x54400000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_DSIB>, <&tegra_car TEGRA114_CLK_DSIBLP>, - <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>; + <&tegra_car TEGRA114_CLK_PLL_D_OUT0>; clock-names = "dsi", "lp", "parent"; resets = <&tegra_car 82>; reset-names = "dsi"; @@ -577,6 +577,21 @@ #iommu-cells = <1>; }; + hda@70030000 { + compatible = "nvidia,tegra114-hda", "nvidia,tegra30-hda"; + reg = <0x70030000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_HDA>, + <&tegra_car TEGRA114_CLK_HDA2HDMI>, + <&tegra_car TEGRA114_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + status = "disabled"; + }; + ahub@70080000 { compatible = "nvidia,tegra114-ahub"; reg = <0x70080000 0x200>, @@ -805,31 +820,40 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <3>; }; }; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi index 8125c1b3e8d7..974c76f007db 100644 --- a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi @@ -716,6 +716,7 @@ regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; enable-active-high; gpio-open-drain; @@ -727,6 +728,7 @@ regulator-name = "+5V_USB_SS"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; enable-active-high; gpio-open-drain; diff --git a/arch/arm/boot/dts/nvidia/tegra124.dtsi b/arch/arm/boot/dts/nvidia/tegra124.dtsi index 8f1fff373461..ec4f0e346b2b 100644 --- a/arch/arm/boot/dts/nvidia/tegra124.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra124.dtsi @@ -165,6 +165,22 @@ status = "disabled"; }; + dsia: dsi@54300000 { + compatible = "nvidia,tegra124-dsi"; + reg = <0x0 0x54300000 0x0 0x00040000>; + clocks = <&tegra_car TEGRA124_CLK_DSIA>, + <&tegra_car TEGRA124_CLK_DSIALP>, + <&tegra_car TEGRA124_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + vic@54340000 { compatible = "nvidia,tegra124-vic"; reg = <0x0 0x54340000 0x0 0x00040000>; @@ -177,6 +193,22 @@ iommus = <&mc TEGRA_SWGROUP_VIC>; }; + dsib: dsi@54400000 { + compatible = "nvidia,tegra124-dsi"; + reg = <0x0 0x54400000 0x0 0x00040000>; + clocks = <&tegra_car TEGRA124_CLK_DSIB>, + <&tegra_car TEGRA124_CLK_DSIBLP>, + <&tegra_car TEGRA124_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 82>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + sor@54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; @@ -938,6 +970,14 @@ }; }; + mipi: mipi@700e3000 { + compatible = "nvidia,tegra124-mipi"; + reg = <0x0 0x700e3000 0x0 0x100>; + clocks = <&tegra_car TEGRA124_CLK_MIPI_CAL>; + clock-names = "mipi-cal"; + #nvidia,mipi-calibrate-cells = <1>; + }; + dfll: clock@70110000 { compatible = "nvidia,tegra124-dfll"; reg = <0 0x70110000 0 0x100>, /* DFLL control */ diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts index e118809dc6d9..67764afeb013 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts @@ -1085,6 +1085,17 @@ sbs,poll-retry-count = <10>; power-supplies = <&mains>; }; + + /* Dynaimage ambient light sensor */ + light-sensor@1c { + compatible = "dynaimage,al3000a"; + reg = <0x1c>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&vdd_1v8_sys>; + }; }; }; diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi index 8c1d5c9fa483..2ff7be8f1382 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi @@ -445,9 +445,9 @@ tegra_ac97: ac97@70002000 { status = "okay"; - nvidia,codec-reset-gpio = + nvidia,codec-reset-gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - nvidia,codec-sync-gpio = + nvidia,codec-sync-gpios = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/nvidia/tegra20-paz00.dts b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts index afb922bd79a7..1408e1e00759 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-paz00.dts +++ b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts @@ -533,6 +533,49 @@ 0x00000000 0x00000000 0x00000000 0x00000000>; }; }; + + emc-tables@1 { + nvidia,ram-code = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + emc-table@166500 { + reg = <166500>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <166500>; + nvidia,emc-registers = <0x0000000a 0x00000016 + 0x00000008 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000c 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x000004df + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x0000000a 0x000000c8 + 0x00000003 0x00000006 0x00000004 0x00000008 + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xe03b0323 + 0x007fe010 0x00001414 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <333000>; + nvidia,emc-registers = <0x00000018 0x00000033 + 0x00000012 0x00000004 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000bff + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x00000008 + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xf0440303 + 0x007fe010 0x00001414 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; }; usb@c5000000 { diff --git a/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts index 7cae6ad57544..4caeeb9f1e1d 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts @@ -2,6 +2,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "tegra20.dtsi" #include "tegra20-cpu-opp.dtsi" @@ -201,16 +202,17 @@ conf_ata { nvidia,pins = "ata", "atc", "atd", "ate", "crtp", "dap2", "dap3", "dap4", "dta", - "dtb", "dtc", "dtd", "dte", "gmb", - "gme", "i2cp", "pta", "slxc", "slxd", - "spdi", "spdo", "uda"; + "dtb", "dtc", "dtd", "gmb", "gme", + "i2cp", "pta", "slxc", "slxd", "spdi", + "spdo", "uda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_atb { nvidia,pins = "atb", "cdev1", "cdev2", "dap1", - "gma", "gmc", "gmd", "gpu", "gpu7", - "gpv", "sdio1", "slxa", "slxk", "uac"; + "dte", "gma", "gmc", "gmd", "gpu", + "gpu7", "gpv", "sdio1", "slxa", "slxk", + "uac"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; @@ -408,6 +410,24 @@ }; }; + leds { + compatible = "gpio-leds"; + + led-ds2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>; + }; + + led-ds3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>; + }; + }; + poweroff { compatible = "gpio-poweroff"; gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index 4052cad859fa..8b3abe817e12 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -69,10 +69,15 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-colibri-eval-v3.dtb \ imx6dl-colibri-iris.dtb \ imx6dl-colibri-iris-v2.dtb \ + imx6dl-colibri-v1.2-aster.dtb \ + imx6dl-colibri-v1.2-eval-v3.dtb \ + imx6dl-colibri-v1.2-iris.dtb \ + imx6dl-colibri-v1.2-iris-v2.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ + imx6dl-dhcom-pdk2.dtb \ imx6dl-dhcom-picoitx.dtb \ imx6dl-eckelmann-ci4x10.dtb \ imx6dl-emcon-avari.dtb \ @@ -99,6 +104,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-kontron-samx6i-ads2.dtb \ imx6dl-lanmcu.dtb \ imx6dl-mamoj.dtb \ imx6dl-mba6a.dtb \ @@ -156,6 +162,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ imx6q-apalis-ixora-v1.2.dtb \ + imx6q-apalis-v1.2-eval.dtb \ + imx6q-apalis-v1.2-eval-v1.2.dtb \ + imx6q-apalis-v1.2-ixora.dtb \ + imx6q-apalis-v1.2-ixora-v1.1.dtb \ + imx6q-apalis-v1.2-ixora-v1.2.dtb \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-b450v3.dtb \ @@ -207,8 +218,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-icore-ofcap10.dtb \ imx6q-icore-ofcap12.dtb \ imx6q-icore-rqs.dtb \ + imx6q-kontron-samx6i-ads2.dtb \ imx6q-kp-tpc.dtb \ imx6q-logicpd.dtb \ + imx6q-lxr.dtb \ imx6q-marsboard.dtb \ imx6q-mba6a.dtb \ imx6q-mba6b.dtb \ @@ -288,6 +301,8 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ dtb-$(CONFIG_SOC_IMX6SLL) += \ imx6sll-evk.dtb \ imx6sll-kobo-clarahd.dtb \ + imx6sll-kobo-clara2e-a.dtb \ + imx6sll-kobo-clara2e-b.dtb \ imx6sll-kobo-librah2o.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ @@ -323,6 +338,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ + imx6ul-var-som-concerto.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-aster.dtb \ imx6ull-colibri-emmc-aster.dtb \ @@ -349,12 +365,15 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ imx6ull-phytec-tauri-emmc.dtb \ imx6ull-phytec-tauri-nand.dtb \ + imx6ull-seeed-npi-dev-board-emmc.dtb \ + imx6ull-seeed-npi-dev-board-nand.dtb \ imx6ull-tarragon-master.dtb \ imx6ull-tarragon-micro.dtb \ imx6ull-tarragon-slave.dtb \ imx6ull-tarragon-slavext.dtb \ imx6ull-tqma6ull2-mba6ulx.dtb \ imx6ull-tqma6ull2l-mba6ulx.dtb \ + imx6ull-uti260b.dtb \ imx6ulz-14x14-evk.dtb \ imx6ulz-bsh-smm-m2.dtb dtb-$(CONFIG_SOC_IMX7D) += \ diff --git a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi index dd03e3860f97..0029c12f16c8 100644 --- a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + }; chosen { stdout-path = &uart1; @@ -127,7 +131,7 @@ compatible = "ricoh,rc5t619"; reg = <0x32>; interrupt-parent = <&gpio5>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; system-power-controller; regulators { diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi index 4e1bf080eaca..dcc3c9d488a8 100644 --- a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi @@ -145,7 +145,7 @@ compatible = "ricoh,rc5t619"; reg = <0x32>; interrupt-parent = <&gpio4>; - interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; system-power-controller; regulators { diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi index 389ecb1ebf8f..a1a89ccacf05 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi @@ -134,7 +134,7 @@ clock-names = "ipg", "per"; }; - dma: dma@209000 { + dma: dma-controller@209000 { compatible = "fsl,imx1-dma"; reg = <0x00209000 0x1000>; interrupts = <61 60>; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi index abc9233c5a1b..31b3fc972abb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi @@ -15,6 +15,22 @@ device_type = "memory"; reg = <0xa0000000 0x08000000>; /* 128MB */ }; + + usbotgphy: usbotgphy { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgphy>; + reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + #phy-cells = <0>; + }; + + usbh2phy: usbh2phy { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2phy>; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + #phy-cells = <0>; + }; }; &cspi1 { @@ -84,6 +100,52 @@ MX27_PAD_NFWE_B__NFWE_B 0x0 >; }; + + pinctrl_usbotgphy: usbotgphygrp { + fsl,pins = < + MX27_PAD_USBH1_RCV__GPIO2_25 0x1 /* reset gpio */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + + pinctrl_usbh2phy: usbh2phygrp { + fsl,pins = < + MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 /* reset gpio */ + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 + MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 + MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 + MX27_PAD_USBH2_STP__USBH2_STP 0x0 + MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 + MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 + MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 + MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 + MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 + MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 + MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 + MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 + >; + }; }; }; @@ -95,3 +157,19 @@ nand-on-flash-bbt; status = "okay"; }; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "ulpi"; + phys = <&usbotgphy>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + phy_type = "ulpi"; + phys = <&usbh2phy>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi index ec3ccc8f4095..989b7659b669 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -88,7 +88,7 @@ reg = <0x10000000 0x20000>; ranges; - dma: dma@10001000 { + dma: dma-controller@10001000 { compatible = "fsl,imx27-dma"; reg = <0x10001000 0x1000>; interrupts = <32>; diff --git a/arch/arm/boot/dts/nxp/imx/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi index 00006c90d9a7..813a81558c40 100644 --- a/arch/arm/boot/dts/nxp/imx/imx31.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi @@ -340,7 +340,7 @@ #address-cells = <1>; #size-cells = <1>; - nfc: nand@b8000000 { + nfc: nand-controller@b8000000 { compatible = "fsl,imx31-nand", "fsl,imx27-nand"; reg = <0xb8000000 0x1000>; interrupts = <33>; diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi index 17bd2a97609a..ef546525e2ec 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi @@ -44,40 +44,38 @@ }; &iomuxc { - imx35-eukrea { - pinctrl_fec: fecgrp { - fsl,pins = < - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 - MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 - MX35_PAD_FEC_COL__FEC_COL 0x80000000 - MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 - MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 - MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 - MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 - MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 - MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 - MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 - MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 - MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 - MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 + MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX35_PAD_FEC_COL__FEC_COL 0x80000000 + MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 + MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 + MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 + MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 + MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 + MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 + MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 + MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 + MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 + MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 - MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 + MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 + >; + }; - pinctrl_tsc2007_1: tsc2007grp-1 { - fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>; - }; + pinctrl_tsc2007_1: tsc2007-1-grp { + fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts index 7f4f812b0811..e7835a769bbc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts @@ -69,57 +69,55 @@ }; &iomuxc { - imx35-eukrea { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000 - MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000 - MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000 - MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000 + MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000 + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000 + MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000 + >; + }; - pinctrl_bp1: bp1grp { - fsl,pins = <MX35_PAD_LD19__GPIO3_25 0x80000000>; - }; + pinctrl_bp1: bp1grp { + fsl,pins = <MX35_PAD_LD19__GPIO3_25 0x80000000>; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 - MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 - MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 - MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 - MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 - MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 - MX35_PAD_LD18__GPIO3_24 0x80000000 /* CD */ - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + MX35_PAD_LD18__GPIO3_24 0x80000000 /* CD */ + >; + }; - pinctrl_led1: led1grp { - fsl,pins = <MX35_PAD_LD23__GPIO3_29 0x80000000>; - }; + pinctrl_led1: led1grp { + fsl,pins = <MX35_PAD_LD23__GPIO3_29 0x80000000>; + }; - pinctrl_reg_lcd_3v3: reg-lcd-3v3 { - fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>; - }; + pinctrl_reg_lcd_3v3: reg-lcd-3v3grp { + fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 - MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 - MX35_PAD_CTS1__UART1_CTS 0x1c5 - MX35_PAD_RTS1__UART1_RTS 0x1c5 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 + MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 + MX35_PAD_CTS1__UART1_CTS 0x1c5 + MX35_PAD_RTS1__UART1_RTS 0x1c5 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX35_PAD_RXD2__UART2_RXD_MUX 0x1c5 - MX35_PAD_TXD2__UART2_TXD_MUX 0x1c5 - MX35_PAD_RTS2__UART2_RTS 0x1c5 - MX35_PAD_CTS2__UART2_CTS 0x1c5 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX35_PAD_RXD2__UART2_RXD_MUX 0x1c5 + MX35_PAD_TXD2__UART2_TXD_MUX 0x1c5 + MX35_PAD_RTS2__UART2_RTS 0x1c5 + MX35_PAD_CTS2__UART2_CTS 0x1c5 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts index ddce0a844758..a2baf8202f94 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts @@ -24,26 +24,24 @@ }; &iomuxc { - imx35-pdk { - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 - MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 - MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 - MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 - MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 - MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 - MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 - MX35_PAD_CTS1__UART1_CTS 0x1c5 - MX35_PAD_RTS1__UART1_RTS 0x1c5 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 + MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 + MX35_PAD_CTS1__UART1_CTS 0x1c5 + MX35_PAD_RTS1__UART1_RTS 0x1c5 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi index 442dc15677b8..30beb39e0162 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi @@ -156,7 +156,7 @@ status = "disabled"; }; - iomuxc: iomuxc@43fac000 { + iomuxc: pinctrl@43fac000 { compatible = "fsl,imx35-iomuxc"; reg = <0x43fac000 0x4000>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx50-evk.dts b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts index 3f45c01d9cce..f40b0d5fdb85 100644 --- a/arch/arm/boot/dts/nxp/imx/imx50-evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts @@ -52,40 +52,38 @@ }; &iomuxc { - imx50-evk { - pinctrl_cspi: cspigrp { - fsl,pins = < - MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00 - MX50_PAD_CSPI_MISO__CSPI_MISO 0x00 - MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00 - MX50_PAD_CSPI_SS0__GPIO4_11 0xc4 - MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84 - >; - }; + pinctrl_cspi: cspigrp { + fsl,pins = < + MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00 + MX50_PAD_CSPI_MISO__CSPI_MISO 0x00 + MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00 + MX50_PAD_CSPI_SS0__GPIO4_11 0xc4 + MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX50_PAD_SSI_RXFS__FEC_MDC 0x80 - MX50_PAD_SSI_RXC__FEC_MDIO 0x80 - MX50_PAD_DISP_D0__FEC_TX_CLK 0x80 - MX50_PAD_DISP_D1__FEC_RX_ERR 0x80 - MX50_PAD_DISP_D2__FEC_RX_DV 0x80 - MX50_PAD_DISP_D3__FEC_RDATA_1 0x80 - MX50_PAD_DISP_D4__FEC_RDATA_0 0x80 - MX50_PAD_DISP_D5__FEC_TX_EN 0x80 - MX50_PAD_DISP_D6__FEC_TDATA_1 0x80 - MX50_PAD_DISP_D7__FEC_TDATA_0 0x80 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX50_PAD_SSI_RXFS__FEC_MDC 0x80 + MX50_PAD_SSI_RXC__FEC_MDIO 0x80 + MX50_PAD_DISP_D0__FEC_TX_CLK 0x80 + MX50_PAD_DISP_D1__FEC_RX_ERR 0x80 + MX50_PAD_DISP_D2__FEC_RX_DV 0x80 + MX50_PAD_DISP_D3__FEC_RDATA_1 0x80 + MX50_PAD_DISP_D4__FEC_RDATA_0 0x80 + MX50_PAD_DISP_D5__FEC_TX_EN 0x80 + MX50_PAD_DISP_D6__FEC_TDATA_1 0x80 + MX50_PAD_DISP_D7__FEC_TDATA_0 0x80 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4 - MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4 - MX50_PAD_UART1_RTS__UART1_RTS 0x1e4 - MX50_PAD_UART1_CTS__UART1_CTS 0x1e4 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4 + MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4 + MX50_PAD_UART1_RTS__UART1_RTS 0x1e4 + MX50_PAD_UART1_CTS__UART1_CTS 0x1e4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx50.dtsi b/arch/arm/boot/dts/nxp/imx/imx50.dtsi index c5b25d2f6264..d76c496b3f71 100644 --- a/arch/arm/boot/dts/nxp/imx/imx50.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx50.dtsi @@ -283,7 +283,7 @@ clock-names = "ipg", "per"; }; - iomuxc: iomuxc@53fa8000 { + iomuxc: pinctrl@53fa8000 { compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; }; @@ -338,7 +338,7 @@ clks: ccm@53fd4000 { compatible = "fsl,imx50-ccm"; reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; + interrupts = <71>, <72>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts index ba28ffe06fe2..670e13136f1f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts @@ -37,36 +37,34 @@ }; &iomuxc { - imx51-apf51 { - pinctrl_fec: fecgrp { - fsl,pins = < - MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 - MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 - MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 - MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 - MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 - MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 - MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 - MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 - MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 - MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 - MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 - MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 - MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 - MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 - MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 - MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 - MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 - MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 - MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts index b61d55ca1467..6ebd80e30683 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts @@ -25,8 +25,8 @@ pinctrl-0 = <&pinctrl_ipu_disp1>; display-timings { - lw700 { - native-mode; + native-mode = <&timing0>; + timing0: timing-lw700 { clock-frequency = <33000033>; hactive = <800>; vactive = <480>; @@ -113,102 +113,100 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx51-apf51dev { - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5 - >; - }; + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5 + >; + }; - pinctrl_hog: hoggrp { - fsl,pins = < - MX51_PAD_EIM_EB2__GPIO2_22 0x0C5 - MX51_PAD_EIM_EB3__GPIO2_23 0x0C5 - MX51_PAD_EIM_CS4__GPIO2_29 0x100 - MX51_PAD_NANDF_D13__GPIO3_27 0x0C5 - MX51_PAD_NANDF_D12__GPIO3_28 0x0C5 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5 - MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5 - MX51_PAD_GPIO1_2__GPIO1_2 0x0C5 - MX51_PAD_GPIO1_3__GPIO1_3 0x0C5 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX51_PAD_EIM_EB2__GPIO2_22 0x0C5 + MX51_PAD_EIM_EB3__GPIO2_23 0x0C5 + MX51_PAD_EIM_CS4__GPIO2_29 0x100 + MX51_PAD_NANDF_D13__GPIO3_27 0x0C5 + MX51_PAD_NANDF_D12__GPIO3_28 0x0C5 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5 + MX51_PAD_GPIO1_2__GPIO1_2 0x0C5 + MX51_PAD_GPIO1_3__GPIO1_3 0x0C5 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + >; + }; - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 - MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 - MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 - >; - }; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 + MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 + MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 - MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 - MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 - MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 - MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 - MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + >; + }; - pinctrl_esdhc2: esdhc2grp { - fsl,pins = < - MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 - MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 - MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 - MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 - MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 - MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 - >; - }; + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed - MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed + MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed + >; + }; - pinctrl_ipu_disp1: ipudisp1grp { - fsl,pins = < - MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 - MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 - MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 - MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 - MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 - MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 - MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 - MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 - MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 - MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 - MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 - MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 - MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 - MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 - MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 - MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 - MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 - MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 - MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 - MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 - MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 - MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 - MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 - MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 - MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 - MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 - >; - }; + pinctrl_ipu_disp1: ipudisp1grp { + fsl,pins = < + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts index 16ff543f3fbf..1b6ec55f9068 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts @@ -89,7 +89,7 @@ status = "disabled"; display-timings { native-mode = <&timing1>; - timing1: claawvga { + timing1: timing-claawvga { clock-frequency = <27000000>; hactive = <800>; vactive = <480>; @@ -474,246 +474,244 @@ }; &iomuxc { - imx51-babbage { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 - MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 - MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 - MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 + MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 + MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 + MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 + >; + }; - pinctrl_clk26mhz_audio: clk26mhzaudiocgrp { - fsl,pins = < - MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 - >; - }; + pinctrl_clk26mhz_audio: clk26mhzaudiocgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 + >; + }; - pinctrl_clk26mhz_osc: clk26mhzoscgrp { - fsl,pins = < - MX51_PAD_DI1_PIN12__GPIO3_1 0x85 - >; - }; + pinctrl_clk26mhz_osc: clk26mhzoscgrp { + fsl,pins = < + MX51_PAD_DI1_PIN12__GPIO3_1 0x85 + >; + }; - pinctrl_clk26mhz_usb: clk26mhzusbgrp { - fsl,pins = < - MX51_PAD_EIM_D17__GPIO2_1 0x85 - >; - }; + pinctrl_clk26mhz_usb: clk26mhzusbgrp { + fsl,pins = < + MX51_PAD_EIM_D17__GPIO2_1 0x85 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 - MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 - MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 - MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 - MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 - MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - MX51_PAD_GPIO1_0__GPIO1_0 0x100 - MX51_PAD_GPIO1_1__GPIO1_1 0x100 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0x100 + MX51_PAD_GPIO1_1__GPIO1_1 0x100 + >; + }; - pinctrl_esdhc2: esdhc2grp { - fsl,pins = < - MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 - MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 - MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 - MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 - MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 - MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 - MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ - MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ - >; - }; + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ + MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 - MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 - MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 - MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 - MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 - MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 - MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 - MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 - MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 - MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 - MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 - MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 - MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 - MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 - MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 - MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 - MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 - MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 + MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 + MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 + MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 + MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 + MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ + >; + }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX51_PAD_EIM_A27__GPIO2_21 0x5 - >; - }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX51_PAD_EIM_A27__GPIO2_21 0x5 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX51_PAD_EIM_D22__GPIO2_6 0x80000000 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX51_PAD_EIM_D22__GPIO2_6 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed - MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed + MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed - MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; - pinctrl_ipu_disp1: ipudisp1grp { - fsl,pins = < - MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 - MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 - MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 - MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 - MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 - MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 - MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 - MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 - MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 - MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 - MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 - MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 - MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 - MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 - MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 - MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 - MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 - MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 - MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 - MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 - MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 - MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 - MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 - MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 - MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 - MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 - >; - }; + pinctrl_ipu_disp1: ipudisp1grp { + fsl,pins = < + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 + >; + }; - pinctrl_ipu_disp2: ipudisp2grp { - fsl,pins = < - MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 - MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 - MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 - MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 - MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 - MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 - MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 - MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 - MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 - MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 - MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 - MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 - MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 - MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 - MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 - MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 - MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 - MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 - MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 - MX51_PAD_DI_GP4__DI2_PIN15 0x5 - >; - }; + pinctrl_ipu_disp2: ipudisp2grp { + fsl,pins = < + MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 + MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 + MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 + MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 + MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 + MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 + MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 + MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 + MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 + MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 + MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 + MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 + MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 + MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 + MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 + MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 + MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 + MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 + MX51_PAD_DI_GP4__DI2_PIN15 0x5 + >; + }; - pinctrl_kpp: kppgrp { - fsl,pins = < - MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 - MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 - MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 - MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 - MX51_PAD_KEY_COL0__KEY_COL0 0xe8 - MX51_PAD_KEY_COL1__KEY_COL1 0xe8 - MX51_PAD_KEY_COL2__KEY_COL2 0xe8 - MX51_PAD_KEY_COL3__KEY_COL3 0xe8 - >; - }; + pinctrl_kpp: kppgrp { + fsl,pins = < + MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 + MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 + MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 + MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 + MX51_PAD_KEY_COL0__KEY_COL0 0xe8 + MX51_PAD_KEY_COL1__KEY_COL1 0xe8 + MX51_PAD_KEY_COL2__KEY_COL2 0xe8 + MX51_PAD_KEY_COL3__KEY_COL3 0xe8 + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 - MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 - MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 - MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 - MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX51_PAD_EIM_D25__UART3_RXD 0x1c5 - MX51_PAD_EIM_D26__UART3_TXD 0x1c5 - MX51_PAD_EIM_D27__UART3_RTS 0x1c5 - MX51_PAD_EIM_D24__UART3_CTS 0x1c5 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + MX51_PAD_EIM_D27__UART3_RTS 0x1c5 + MX51_PAD_EIM_D24__UART3_CTS 0x1c5 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 - MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 - MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 - MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 - MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 - MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 - MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 - MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 - MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 - MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 - MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 + >; + }; - pinctrl_usbh1reg: usbh1reggrp { - fsl,pins = < - MX51_PAD_EIM_D21__GPIO2_5 0x85 - >; - }; + pinctrl_usbh1reg: usbh1reggrp { + fsl,pins = < + MX51_PAD_EIM_D21__GPIO2_5 0x85 + >; + }; - pinctrl_usbotgreg: usbotgreggrp { - fsl,pins = < - MX51_PAD_GPIO1_7__GPIO1_7 0x85 - >; - }; + pinctrl_usbotgreg: usbotgreggrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0x85 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts index 10cae7c3a879..9750b5f93330 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts @@ -78,49 +78,47 @@ }; &iomuxc { - imx51-digi-connectcore-jsk { - pinctrl_owire: owiregrp { - fsl,pins = < - MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000 - >; - }; + pinctrl_owire: owiregrp { + fsl,pins = < + MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 - MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 - MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 - MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 - MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 - MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 - MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 - MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 - MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 - MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 - MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 - MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 - MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 - MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 - MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi index f0809a16a2ce..dc72a2d14960 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi @@ -215,162 +215,160 @@ }; &iomuxc { - imx51-digi-connectcore-som { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX51_PAD_SD1_CLK__SD1_CLK 0x400021d5 - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 - MX51_PAD_SD1_DATA0__SD1_DATA0 0x400020d5 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CLK__SD1_CLK 0x400021d5 + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x400020d5 + >; + }; - pinctrl_esdhc2: esdhc2grp { - fsl,pins = < - MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 - MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 - MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 - MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 - MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 - MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 - >; - }; + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 - MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 - MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 - MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 - MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 - MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 - MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 - MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 - MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 - MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 - MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 - MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 - MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 - MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 - MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 - MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 - MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 - MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed - MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed + MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed + >; + }; - pinctrl_i2c2_gpio: i2c2gpiogrp { - fsl,pins = < - MX51_PAD_GPIO1_2__GPIO1_2 0x400001ed - MX51_PAD_GPIO1_3__GPIO1_3 0x400001ed - >; - }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX51_PAD_GPIO1_2__GPIO1_2 0x400001ed + MX51_PAD_GPIO1_3__GPIO1_3 0x400001ed + >; + }; - pinctrl_nfc: nfcgrp { - fsl,pins = < - MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 - MX51_PAD_NANDF_D1__NANDF_D1 0x80000000 - MX51_PAD_NANDF_D2__NANDF_D2 0x80000000 - MX51_PAD_NANDF_D3__NANDF_D3 0x80000000 - MX51_PAD_NANDF_D4__NANDF_D4 0x80000000 - MX51_PAD_NANDF_D5__NANDF_D5 0x80000000 - MX51_PAD_NANDF_D6__NANDF_D6 0x80000000 - MX51_PAD_NANDF_D7__NANDF_D7 0x80000000 - MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000 - MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000 - MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000 - MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000 - MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000 - MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000 - MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000 - >; - }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 + MX51_PAD_NANDF_D1__NANDF_D1 0x80000000 + MX51_PAD_NANDF_D2__NANDF_D2 0x80000000 + MX51_PAD_NANDF_D3__NANDF_D3 0x80000000 + MX51_PAD_NANDF_D4__NANDF_D4 0x80000000 + MX51_PAD_NANDF_D5__NANDF_D5 0x80000000 + MX51_PAD_NANDF_D6__NANDF_D6 0x80000000 + MX51_PAD_NANDF_D7__NANDF_D7 0x80000000 + MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000 + MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000 + MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000 + MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000 + MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000 + MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000 + MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000 + >; + }; - pinctrl_lan9221: lan9221grp { - fsl,pins = < - MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */ - >; - }; + pinctrl_lan9221: lan9221grp { + fsl,pins = < + MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */ + >; + }; - pinctrl_mc13892: mc13892grp { - fsl,pins = < - MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */ - >; - }; + pinctrl_mc13892: mc13892grp { + fsl,pins = < + MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */ + >; + }; - pinctrl_mma7455l: mma7455lgrp { - fsl,pins = < - MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */ - MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */ - >; - }; + pinctrl_mma7455l: mma7455lgrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */ + MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */ + >; + }; - pinctrl_weim: weimgrp { - fsl,pins = < - MX51_PAD_EIM_DA0__EIM_DA0 0x80000000 - MX51_PAD_EIM_DA1__EIM_DA1 0x80000000 - MX51_PAD_EIM_DA2__EIM_DA2 0x80000000 - MX51_PAD_EIM_DA3__EIM_DA3 0x80000000 - MX51_PAD_EIM_DA4__EIM_DA4 0x80000000 - MX51_PAD_EIM_DA5__EIM_DA5 0x80000000 - MX51_PAD_EIM_DA6__EIM_DA6 0x80000000 - MX51_PAD_EIM_DA7__EIM_DA7 0x80000000 - MX51_PAD_EIM_DA8__EIM_DA8 0x80000000 - MX51_PAD_EIM_DA9__EIM_DA9 0x80000000 - MX51_PAD_EIM_DA10__EIM_DA10 0x80000000 - MX51_PAD_EIM_DA11__EIM_DA11 0x80000000 - MX51_PAD_EIM_DA12__EIM_DA12 0x80000000 - MX51_PAD_EIM_DA13__EIM_DA13 0x80000000 - MX51_PAD_EIM_DA14__EIM_DA14 0x80000000 - MX51_PAD_EIM_DA15__EIM_DA15 0x80000000 - MX51_PAD_EIM_A16__EIM_A16 0x80000000 - MX51_PAD_EIM_A17__EIM_A17 0x80000000 - MX51_PAD_EIM_A18__EIM_A18 0x80000000 - MX51_PAD_EIM_A19__EIM_A19 0x80000000 - MX51_PAD_EIM_A20__EIM_A20 0x80000000 - MX51_PAD_EIM_A21__EIM_A21 0x80000000 - MX51_PAD_EIM_A22__EIM_A22 0x80000000 - MX51_PAD_EIM_A23__EIM_A23 0x80000000 - MX51_PAD_EIM_A24__EIM_A24 0x80000000 - MX51_PAD_EIM_A25__EIM_A25 0x80000000 - MX51_PAD_EIM_A26__EIM_A26 0x80000000 - MX51_PAD_EIM_A27__EIM_A27 0x80000000 - MX51_PAD_EIM_D16__EIM_D16 0x80000000 - MX51_PAD_EIM_D17__EIM_D17 0x80000000 - MX51_PAD_EIM_D18__EIM_D18 0x80000000 - MX51_PAD_EIM_D19__EIM_D19 0x80000000 - MX51_PAD_EIM_D20__EIM_D20 0x80000000 - MX51_PAD_EIM_D21__EIM_D21 0x80000000 - MX51_PAD_EIM_D22__EIM_D22 0x80000000 - MX51_PAD_EIM_D23__EIM_D23 0x80000000 - MX51_PAD_EIM_D24__EIM_D24 0x80000000 - MX51_PAD_EIM_D25__EIM_D25 0x80000000 - MX51_PAD_EIM_D26__EIM_D26 0x80000000 - MX51_PAD_EIM_D27__EIM_D27 0x80000000 - MX51_PAD_EIM_D28__EIM_D28 0x80000000 - MX51_PAD_EIM_D29__EIM_D29 0x80000000 - MX51_PAD_EIM_D30__EIM_D30 0x80000000 - MX51_PAD_EIM_D31__EIM_D31 0x80000000 - MX51_PAD_EIM_OE__EIM_OE 0x80000000 - MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000 - MX51_PAD_EIM_LBA__EIM_LBA 0x80000000 - MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */ - >; - }; + pinctrl_weim: weimgrp { + fsl,pins = < + MX51_PAD_EIM_DA0__EIM_DA0 0x80000000 + MX51_PAD_EIM_DA1__EIM_DA1 0x80000000 + MX51_PAD_EIM_DA2__EIM_DA2 0x80000000 + MX51_PAD_EIM_DA3__EIM_DA3 0x80000000 + MX51_PAD_EIM_DA4__EIM_DA4 0x80000000 + MX51_PAD_EIM_DA5__EIM_DA5 0x80000000 + MX51_PAD_EIM_DA6__EIM_DA6 0x80000000 + MX51_PAD_EIM_DA7__EIM_DA7 0x80000000 + MX51_PAD_EIM_DA8__EIM_DA8 0x80000000 + MX51_PAD_EIM_DA9__EIM_DA9 0x80000000 + MX51_PAD_EIM_DA10__EIM_DA10 0x80000000 + MX51_PAD_EIM_DA11__EIM_DA11 0x80000000 + MX51_PAD_EIM_DA12__EIM_DA12 0x80000000 + MX51_PAD_EIM_DA13__EIM_DA13 0x80000000 + MX51_PAD_EIM_DA14__EIM_DA14 0x80000000 + MX51_PAD_EIM_DA15__EIM_DA15 0x80000000 + MX51_PAD_EIM_A16__EIM_A16 0x80000000 + MX51_PAD_EIM_A17__EIM_A17 0x80000000 + MX51_PAD_EIM_A18__EIM_A18 0x80000000 + MX51_PAD_EIM_A19__EIM_A19 0x80000000 + MX51_PAD_EIM_A20__EIM_A20 0x80000000 + MX51_PAD_EIM_A21__EIM_A21 0x80000000 + MX51_PAD_EIM_A22__EIM_A22 0x80000000 + MX51_PAD_EIM_A23__EIM_A23 0x80000000 + MX51_PAD_EIM_A24__EIM_A24 0x80000000 + MX51_PAD_EIM_A25__EIM_A25 0x80000000 + MX51_PAD_EIM_A26__EIM_A26 0x80000000 + MX51_PAD_EIM_A27__EIM_A27 0x80000000 + MX51_PAD_EIM_D16__EIM_D16 0x80000000 + MX51_PAD_EIM_D17__EIM_D17 0x80000000 + MX51_PAD_EIM_D18__EIM_D18 0x80000000 + MX51_PAD_EIM_D19__EIM_D19 0x80000000 + MX51_PAD_EIM_D20__EIM_D20 0x80000000 + MX51_PAD_EIM_D21__EIM_D21 0x80000000 + MX51_PAD_EIM_D22__EIM_D22 0x80000000 + MX51_PAD_EIM_D23__EIM_D23 0x80000000 + MX51_PAD_EIM_D24__EIM_D24 0x80000000 + MX51_PAD_EIM_D25__EIM_D25 0x80000000 + MX51_PAD_EIM_D26__EIM_D26 0x80000000 + MX51_PAD_EIM_D27__EIM_D27 0x80000000 + MX51_PAD_EIM_D28__EIM_D28 0x80000000 + MX51_PAD_EIM_D29__EIM_D29 0x80000000 + MX51_PAD_EIM_D30__EIM_D30 0x80000000 + MX51_PAD_EIM_D31__EIM_D31 0x80000000 + MX51_PAD_EIM_OE__EIM_OE 0x80000000 + MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000 + MX51_PAD_EIM_LBA__EIM_LBA 0x80000000 + MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi index c2a929ba8ceb..0a150c91d30f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi @@ -44,43 +44,41 @@ }; &iomuxc { - imx51-eukrea { - pinctrl_tsc2007_1: tsc2007grp-1 { - fsl,pins = < - MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5 - MX51_PAD_NANDF_D8__GPIO4_0 0x1f5 - >; - }; + pinctrl_tsc2007_1: tsc2007-1-grp { + fsl,pins = < + MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5 + MX51_PAD_NANDF_D8__GPIO4_0 0x1f5 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 - MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 - MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 - MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 - MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 - MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 - MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 - MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 - MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 - MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 - MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 - MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 - MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 - MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 - MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 - MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 - MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 - MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX51_PAD_SD2_CMD__I2C1_SCL 0x400001ed - MX51_PAD_SD2_CLK__I2C1_SDA 0x400001ed - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX51_PAD_SD2_CMD__I2C1_SCL 0x400001ed + MX51_PAD_SD2_CLK__I2C1_SDA 0x400001ed + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts index aff380e999c7..0e0b9a811b96 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts @@ -112,117 +112,115 @@ }; &iomuxc { - imx51-eukrea { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 - MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 - MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 - MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 + MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 + MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 + MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 + >; + }; - pinctrl_can: cangrp { - fsl,pins = < - MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */ - MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */ - >; - }; + pinctrl_can: cangrp { + fsl,pins = < + MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */ + MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */ + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */ + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 - MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 - MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 - MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 - MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 - MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 - MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 - MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; - pinctrl_uart3_rtscts: uart3rtsctsgrp { - fsl,pins = < - MX51_PAD_KEY_COL4__UART3_RTS 0x1c5 - MX51_PAD_KEY_COL5__UART3_CTS 0x1c5 - >; - }; + pinctrl_uart3_rtscts: uart3rtsctsgrp { + fsl,pins = < + MX51_PAD_KEY_COL4__UART3_RTS 0x1c5 + MX51_PAD_KEY_COL5__UART3_CTS 0x1c5 + >; + }; - pinctrl_backlight_1: backlightgrp-1 { - fsl,pins = < - MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5 - >; - }; + pinctrl_backlight_1: backlight1grp { + fsl,pins = < + MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5 + >; + }; - pinctrl_esdhc1_cd: esdhc1_cd { - fsl,pins = < - MX51_PAD_GPIO1_0__GPIO1_0 0xd5 - >; - }; + pinctrl_esdhc1_cd: esdhc1_cdgrp { + fsl,pins = < + MX51_PAD_GPIO1_0__GPIO1_0 0xd5 + >; + }; - pinctrl_gpiokeys_1: gpiokeysgrp-1 { - fsl,pins = < - MX51_PAD_NANDF_D9__GPIO3_31 0x1f5 - >; - }; + pinctrl_gpiokeys_1: gpiokeys1grp { + fsl,pins = < + MX51_PAD_NANDF_D9__GPIO3_31 0x1f5 + >; + }; - pinctrl_gpioled: gpioledgrp-1 { - fsl,pins = < - MX51_PAD_NANDF_D10__GPIO3_30 0x80000000 - >; - }; + pinctrl_gpioled: gpioled1grp { + fsl,pins = < + MX51_PAD_NANDF_D10__GPIO3_30 0x80000000 + >; + }; - pinctrl_reg_lcd_3v3: reg_lcd_3v3 { - fsl,pins = < - MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 - >; - }; + pinctrl_reg_lcd_3v3: reg_lcd_3v3grp { + fsl,pins = < + MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 - MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 - MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 - MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 - MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 - MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 - MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 - MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 - MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 - MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 - MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 - MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; - pinctrl_usbh1_vbus: usbh1-vbusgrp { - fsl,pins = < - MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 - >; - }; + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts index f7408722d68a..079bd3d14999 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts @@ -45,7 +45,7 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 78770>; + pwms = <&pwm1 0 78770 0>; brightness-levels = <0 150 200 255>; default-brightness-level = <1>; power-supply = <&backlight_reg>; @@ -58,8 +58,8 @@ pinctrl-0 = <&pinctrl_lcd>; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <30066000>; hactive = <800>; vactive = <480>; @@ -113,7 +113,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_backlight>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts index 7cd17b43b4b2..06545a6052f7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts @@ -160,7 +160,7 @@ }; }; - mdio_gpio: mdio-gpio { + mdio_gpio: mdio { compatible = "virtual,mdio-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_swmdio>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts index 625f9ac671ae..26eb7a9506e4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts @@ -37,7 +37,7 @@ regulator-max-microvolt = <5000000>; }; - mdio_gpio: mdio-gpio { + mdio_gpio: mdio { compatible = "virtual,mdio-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_swmdio>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi index 4efce49022e4..8323e3a56a1f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi @@ -399,7 +399,7 @@ clock-names = "ipg", "per"; }; - iomuxc: iomuxc@73fa8000 { + iomuxc: pinctrl@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; }; @@ -458,7 +458,7 @@ clks: ccm@73fd4000 { compatible = "fsl,imx51-ccm"; reg = <0x73fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; + interrupts = <71>, <72>; #clock-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ard.dts b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts index 165e1b00b721..e580427660b1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-ard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts @@ -101,67 +101,65 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-ard { - pinctrl_hog: hoggrp { - fsl,pins = < - MX53_PAD_GPIO_1__GPIO1_1 0x80000000 - MX53_PAD_GPIO_9__GPIO1_9 0x80000000 - MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 - MX53_PAD_GPIO_10__GPIO4_0 0x80000000 - MX53_PAD_DISP0_DAT16__GPIO5_10 0x80000000 - MX53_PAD_DISP0_DAT17__GPIO5_11 0x80000000 - MX53_PAD_DISP0_DAT18__GPIO5_12 0x80000000 - MX53_PAD_DISP0_DAT19__GPIO5_13 0x80000000 - MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x80000000 - MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x80000000 - MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x80000000 - MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x80000000 - MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x80000000 - MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x80000000 - MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x80000000 - MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x80000000 - MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x80000000 - MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x80000000 - MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x80000000 - MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x80000000 - MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x80000000 - MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x80000000 - MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x80000000 - MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x80000000 - MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000 - MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000 - MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000 - MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000 - MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000 - MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000 - MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000 - MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000 - MX53_PAD_EIM_RW__EMI_WEIM_RW 0x80000000 - MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_1__GPIO1_1 0x80000000 + MX53_PAD_GPIO_9__GPIO1_9 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_GPIO_10__GPIO4_0 0x80000000 + MX53_PAD_DISP0_DAT16__GPIO5_10 0x80000000 + MX53_PAD_DISP0_DAT17__GPIO5_11 0x80000000 + MX53_PAD_DISP0_DAT18__GPIO5_12 0x80000000 + MX53_PAD_DISP0_DAT19__GPIO5_13 0x80000000 + MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x80000000 + MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x80000000 + MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x80000000 + MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x80000000 + MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x80000000 + MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x80000000 + MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x80000000 + MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x80000000 + MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x80000000 + MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x80000000 + MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x80000000 + MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x80000000 + MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x80000000 + MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x80000000 + MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x80000000 + MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x80000000 + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000 + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000 + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000 + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000 + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000 + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000 + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000 + MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000 + MX53_PAD_EIM_RW__EMI_WEIM_RW 0x80000000 + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5 - MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5 - MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5 - MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts index 0e7f071fd10e..9c480e4d27ce 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts @@ -13,7 +13,7 @@ backlight_lcd: backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000>; + pwms = <&pwm2 0 50000 0>; power-supply = <®_backlight>; brightness-levels = <0 24 28 32 36 40 44 48 52 56 @@ -102,38 +102,36 @@ }; &iomuxc { - imx53-kp-ddc { - pinctrl_disp: dispgrp { - fsl,pins = < - MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4 - MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4 - MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4 - MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4 - MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4 - MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4 - MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4 - MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4 - MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4 - MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4 - MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4 - MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4 - MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4 - MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4 - MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4 - MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4 - MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4 - MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4 - MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4 - MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4 - MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4 - MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4 - MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4 - MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4 - MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4 - MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4 - MX53_PAD_GPIO_1__PWM2_PWMO 0x4 - >; - }; + pinctrl_disp: dispgrp { + fsl,pins = < + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4 + MX53_PAD_GPIO_1__PWM2_PWMO 0x4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi index 4508f34139a0..ebbd4d93e460 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi @@ -13,7 +13,7 @@ compatible = "pwm-beeper"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_buzzer>; - pwms = <&pwm1 0 500000>; + pwms = <&pwm1 0 500000 0>; }; gpio-buttons { @@ -98,56 +98,54 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kp_common>; - imx53-kp-common { - pinctrl_buzzer: buzzergrp { - fsl,pins = < - MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4 - >; - }; + pinctrl_buzzer: buzzergrp { + fsl,pins = < + MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4 + >; + }; - pinctrl_gpiobuttons: gpiobuttonsgrp { - fsl,pins = < - MX53_PAD_EIM_RW__GPIO2_26 0x1e4 - MX53_PAD_EIM_D22__GPIO3_22 0x1e4 - >; - }; + pinctrl_gpiobuttons: gpiobuttonsgrp { + fsl,pins = < + MX53_PAD_EIM_RW__GPIO2_26 0x1e4 + MX53_PAD_EIM_D22__GPIO3_22 0x1e4 + >; + }; - pinctrl_kp_common: kpcommongrp { - fsl,pins = < - MX53_PAD_EIM_CS0__GPIO2_23 0x1e4 - MX53_PAD_GPIO_19__GPIO4_5 0x1e4 - MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4 - MX53_PAD_PATA_DATA7__GPIO2_7 0xe0 - MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4 - MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4 - MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4 - MX53_PAD_EIM_D17__GPIO3_17 0x1e4 - MX53_PAD_EIM_D18__GPIO3_18 0x1e4 - MX53_PAD_EIM_D21__GPIO3_21 0x1e4 - MX53_PAD_EIM_D29__GPIO3_29 0x1e4 - MX53_PAD_EIM_DA11__GPIO3_11 0x1e4 - MX53_PAD_EIM_DA13__GPIO3_13 0x1e4 - MX53_PAD_EIM_DA14__GPIO3_14 0x1e4 - MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4 - MX53_PAD_SD1_CMD__GPIO1_18 0x1e4 - MX53_PAD_SD1_CLK__GPIO1_20 0x1e4 - >; - }; + pinctrl_kp_common: kpcommongrp { + fsl,pins = < + MX53_PAD_EIM_CS0__GPIO2_23 0x1e4 + MX53_PAD_GPIO_19__GPIO4_5 0x1e4 + MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4 + MX53_PAD_PATA_DATA7__GPIO2_7 0xe0 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_EIM_DA11__GPIO3_11 0x1e4 + MX53_PAD_EIM_DA13__GPIO3_13 0x1e4 + MX53_PAD_EIM_DA14__GPIO3_14 0x1e4 + MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4 + MX53_PAD_SD1_CMD__GPIO1_18 0x1e4 + MX53_PAD_SD1_CLK__GPIO1_20 0x1e4 + >; + }; - pinctrl_leds: ledgrp { - fsl,pins = < - MX53_PAD_EIM_EB2__GPIO2_30 0x1d4 - MX53_PAD_EIM_D28__GPIO3_28 0x1d4 - MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4 - >; - }; + pinctrl_leds: ledgrp { + fsl,pins = < + MX53_PAD_EIM_EB2__GPIO2_30 0x1d4 + MX53_PAD_EIM_D28__GPIO3_28 0x1d4 + MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4 - MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4 + >; }; }; @@ -162,14 +160,6 @@ >; }; -&pwm1 { - #pwm-cells = <2>; -}; - -&pwm2 { - #pwm-cells = <2>; -}; - &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi index 00b8d7ca41a2..df543b4751e0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi @@ -77,41 +77,39 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-m53evk { - pinctrl_hog: hoggrp { - fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 - MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 - MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 + MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 + >; + }; - pinctrl_nand: nandgrp { - fsl,pins = < - MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 - MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 - MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 - MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 - MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 - MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 - MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 - MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 - MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 - MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 - MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 - MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 - MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 - MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 - MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 - >; - }; + pinctrl_nand: nandgrp { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 + MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 + MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 + MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 + MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 + MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 + MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 + MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 + MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts index c323b4dbe9f0..eb3d66305395 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts @@ -17,8 +17,8 @@ pinctrl-0 = <&pinctrl_ipu_disp1>; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <31500000>; hactive = <800>; vactive = <480>; @@ -41,7 +41,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 3000>; + pwms = <&pwm1 0 3000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_backlight>; @@ -156,155 +156,153 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-m53evk { - pinctrl_usb: usbgrp { - fsl,pins = < - MX53_PAD_GPIO_2__GPIO1_2 0x80000000 - MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 - >; - }; + pinctrl_usb: usbgrp { + fsl,pins = < + MX53_PAD_GPIO_2__GPIO1_2 0x80000000 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX53_PAD_GPIO_4__GPIO1_4 0x000b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX53_PAD_GPIO_4__GPIO1_4 0x000b0 + >; + }; - led_pin_gpio: led_gpio { - fsl,pins = < - MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 - MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 - >; - }; + led_pin_gpio: ledgpiogrp { + fsl,pins = < + MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 + MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 - MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 - MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 - MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 + MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 + MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 + MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 + >; + }; - pinctrl_can1: can1grp { - fsl,pins = < - MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 - MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 + >; + }; - pinctrl_can2: can2grp { - fsl,pins = < - MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 - MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 - >; - }; + pinctrl_can2: can2grp { + fsl,pins = < + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 - MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 + MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 - MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 + >; + }; - pinctrl_ipu_disp1: ipudisp1grp { - fsl,pins = < - MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5 - MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5 - MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5 - MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5 - MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5 - MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5 - MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5 - MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5 - MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5 - MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5 - MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5 - MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5 - MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5 - MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5 - MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5 - MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5 - MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5 - MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5 - MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5 - MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5 - MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5 - MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5 - MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5 - MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5 - MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5 - MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5 - MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5 - MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5 - MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5 - MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5 - MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5 - MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 - >; - }; + pinctrl_ipu_disp1: ipudisp1grp { + fsl,pins = < + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5 + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5 + MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5 + MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5 + MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5 + MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5 + MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5 + MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 - MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 + >; }; }; @@ -313,7 +311,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts index 4d77b6077fc1..6210673f93be 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts @@ -64,6 +64,7 @@ reg = <0>; lvds_decoder_in: endpoint { + data-mapping = "jeida-18"; remote-endpoint = <&lvds0_out>; }; }; @@ -277,186 +278,184 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-m53evk { - hoggrp { - fsl,pins = < - MX53_PAD_GPIO_19__CCM_CLKO 0x1e4 - MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4 - MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4 - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 - MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4 - MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4 - MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4 - MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4 - MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4 - MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4 - MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4 - MX53_PAD_EIM_D24__GPIO3_24 0x1e4 - MX53_PAD_EIM_D25__GPIO3_25 0x1e4 - MX53_PAD_EIM_D29__GPIO3_29 0x1e4 - MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4 - MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4 - MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4 - MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4 - >; - }; + hoggrp { + fsl,pins = < + MX53_PAD_GPIO_19__CCM_CLKO 0x1e4 + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4 + MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4 + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 + MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4 + MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4 + MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4 + MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4 + MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4 + MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4 + MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4 + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4 + MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4 + >; + }; - pinctrl_led: ledgrp { - fsl,pins = < - MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4 - MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4 - >; - }; + pinctrl_led: ledgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4 + >; + }; - pinctrl_beeper: beepergrp { - fsl,pins = < - MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4 - >; - }; + pinctrl_beeper: beepergrp { + fsl,pins = < + MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4 + >; + }; - pinctrl_can1: can1grp { - fsl,pins = < - MX53_PAD_GPIO_7__CAN1_TXCAN 0x1c4 - MX53_PAD_GPIO_8__CAN1_RXCAN 0x1c4 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x1c4 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x1c4 + >; + }; - pinctrl_can2: can2grp { - fsl,pins = < - MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4 - MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4 - >; - }; + pinctrl_can2: can2grp { + fsl,pins = < + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4 + >; + }; - pinctrl_display_gpio: display-gpiogrp { - fsl,pins = < - MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */ - MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */ - MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */ + pinctrl_display_gpio: display-gpiogrp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */ + MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */ - MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */ - >; - }; + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */ + >; + }; - pinctrl_edt_ft5x06: edt-ft5x06grp { - fsl,pins = < - MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */ - MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */ - MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */ - >; - }; + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */ + MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */ + MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */ + >; + }; - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4 - MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4 - MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4 - MX53_PAD_EIM_RW__GPIO2_26 0xe4 - MX53_PAD_EIM_LBA__GPIO2_27 0xe4 - >; - }; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4 + MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4 + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4 + MX53_PAD_EIM_RW__GPIO2_26 0xe4 + MX53_PAD_EIM_LBA__GPIO2_27 0xe4 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4 - MX53_PAD_GPIO_1__GPIO1_1 0x1c4 - MX53_PAD_GPIO_9__GPIO1_9 0x1e4 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4 + MX53_PAD_GPIO_1__GPIO1_1 0x1c4 + MX53_PAD_GPIO_9__GPIO1_9 0x1e4 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x1e4 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4 - MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4 - MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x1e4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4 + MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 - MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 - MX53_PAD_GPIO_5__I2C3_SCL 0x400001e4 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 + MX53_PAD_GPIO_5__I2C3_SCL 0x400001e4 + >; + }; - pinctrl_lvds0: lvds0grp { - /* LVDS pins only have pin mux configuration */ - fsl,pins = < - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 - >; - }; + pinctrl_lvds0: lvds0grp { + /* LVDS pins only have pin mux configuration */ + fsl,pins = < + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + >; + }; - pinctrl_power_button: powerbutgrp { - fsl,pins = < - MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4 - >; - }; + pinctrl_power_button: powerbutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4 + >; + }; - pinctrl_power_out: poweroutgrp { - fsl,pins = < - MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4 - >; - }; + pinctrl_power_out: poweroutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 - MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4 - MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4 + MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 - MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4 - MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 + >; + }; - pinctrl_usb: usbgrp { - fsl,pins = < - MX53_PAD_GPIO_2__GPIO1_2 0x1c4 - MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4 - MX53_PAD_GPIO_4__GPIO1_4 0x1c4 - MX53_PAD_GPIO_18__GPIO7_13 0x1c4 - >; - }; + pinctrl_usb: usbgrp { + fsl,pins = < + MX53_PAD_GPIO_2__GPIO1_2 0x1c4 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4 + MX53_PAD_GPIO_4__GPIO1_4 0x1c4 + MX53_PAD_GPIO_18__GPIO7_13 0x1c4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts index 6a37616cef1c..3cdb87ac1d7c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts @@ -17,7 +17,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000>; + pwms = <&pwm2 0 50000 0>; brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>; default-brightness-level = <10>; enable-gpios = <&gpio7 7 0>; @@ -75,71 +75,65 @@ }; &iomuxc { - lvds1 { - pinctrl_lvds1_1: lvds1-grp1 { - fsl,pins = < - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 - >; - }; + pinctrl_lvds1_1: lvds1-1-grp { + fsl,pins = < + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + >; + }; - pinctrl_lvds1_2: lvds1-grp2 { - fsl,pins = < - MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 - MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 - MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 - MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 - MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 - >; - }; + pinctrl_lvds1_2: lvds1-2-grp { + fsl,pins = < + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 + >; }; - disp1 { - pinctrl_disp1_1: disp1-grp1 { - fsl,pins = < - MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */ - MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */ - MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */ - MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */ - MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000 - MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000 - MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000 - MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000 - MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000 - MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000 - MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000 - MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000 - MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000 - MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000 - MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000 - MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000 - MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000 - MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000 - MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000 - MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000 - MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000 - MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000 - MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000 - MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000 - MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000 - MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000 - MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000 - MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000 - >; - }; + pinctrl_disp1_1: disp1-1-grp { + fsl,pins = < + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */ + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */ + MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */ + MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */ + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000 + >; }; - tve { - pinctrl_vga_sync_1: vgasync-grp1 { - fsl,pins = < - /* VGA_VSYNC, HSYNC with max drive strength */ - MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6 - MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6 - >; - }; + pinctrl_vga_sync_1: vgasync-1-grp { + fsl,pins = < + /* VGA_VSYNC, HSYNC with max drive strength */ + MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6 + MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6 + >; }; }; @@ -168,15 +162,15 @@ }; expander: pca9554@20 { - compatible = "pca9554"; + compatible = "nxp,pca9554"; reg = <0x20>; interrupts = <109>; #gpio-cells = <2>; gpio-controller; }; - sensor2: lm75@49 { - compatible = "lm75"; + sensor2: temperature-sensor@49 { + compatible = "national,lm75b"; reg = <0x49>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts index 70c4a4852256..2892e457fea7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts @@ -167,7 +167,7 @@ pwm_bl: backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000>; + pwms = <&pwm2 0 50000 0>; brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35 38 40 43 45 48 51 53 56 58 61 63 66 68 71 73 76 79 81 84 86 89 91 94 96 99 102 104 @@ -187,7 +187,7 @@ led-1 { label = "alarm-brightness"; - pwms = <&pwm1 0 100000>; + pwms = <&pwm1 0 100000 0>; max-brightness = <255>; }; }; @@ -593,7 +593,7 @@ touchscreen@4b { compatible = "atmel,maxtouch"; - reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; reg = <0x4b>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; @@ -628,14 +628,12 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi index d80440446473..1869ad86baf2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi @@ -85,7 +85,7 @@ }; }; - panel { + panel_dpi: panel { compatible = "sii,43wvf1g"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_display_power>; @@ -170,157 +170,155 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-qsb { - pinctrl_hog: hoggrp { - fsl,pins = < - MX53_PAD_GPIO_8__GPIO1_8 0x80000000 - MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 - MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 - MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 - MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 - MX53_PAD_GPIO_16__GPIO7_11 0x80000000 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_8__GPIO1_8 0x80000000 + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 + MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 + MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 + MX53_PAD_GPIO_16__GPIO7_11 0x80000000 + >; + }; - led_pin_gpio7_7: led_gpio7_7 { - fsl,pins = < - MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 - >; - }; + led_pin_gpio7_7: led_gpio7-7-grp { + fsl,pins = < + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 + >; + }; - pinctrl_codec: codecgrp { - fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 - >; - }; + pinctrl_codec: codecgrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; - pinctrl_display_power: displaypowergrp { - fsl,pins = < - MX53_PAD_EIM_D24__GPIO3_24 0x1e4 - >; - }; + pinctrl_display_power: displaypowergrp { + fsl,pins = < + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 - MX53_PAD_EIM_DA13__GPIO3_13 0xe4 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_EIM_DA13__GPIO3_13 0xe4 + >; + }; - pinctrl_esdhc3: esdhc3grp { - fsl,pins = < - MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 - MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 - MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 - MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 - MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 - MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 - MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 - MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 - MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 - MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 - >; - }; + pinctrl_esdhc3: esdhc3grp { + fsl,pins = < + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x4 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 + >; + }; - /* open drain */ - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec - MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec - >; - }; + /* open drain */ + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec + MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 - MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 + >; + }; - pinctrl_ipu_disp0: ipudisp0grp { - fsl,pins = < - MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 - MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 - MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 - MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 - MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 - MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 - MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 - MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 - MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 - MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 - MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 - MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 - MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 - MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 - MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 - MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 - MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 - MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 - MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 - MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 - MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 - MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 - MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 - MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 - MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 - MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 - MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 - MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 - >; - }; + pinctrl_ipu_disp0: ipudisp0grp { + fsl,pins = < + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX53_PAD_GPIO_1__PWM2_PWMO 0x5 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX53_PAD_GPIO_1__PWM2_PWMO 0x5 + >; + }; - pinctrl_vga_sync: vgasync-grp { - fsl,pins = < - /* VGA_HSYNC, VSYNC with max drive strength */ - MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6 - MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6 - >; - }; + pinctrl_vga_sync: vgasync-grp { + fsl,pins = < + /* VGA_HSYNC, VSYNC with max drive strength */ + MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6 + MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso index c84e9b052527..2527bfe13145 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso @@ -10,8 +10,6 @@ /plugin/; &{/} { - /delete-node/ panel; - hdmi: connector-hdmi { compatible = "hdmi-connector"; label = "hdmi"; @@ -36,9 +34,7 @@ &display0 { status = "okay"; -}; -&display0 { port@1 { display0_out: endpoint { remote-endpoint = <&sii9022_in>; @@ -82,6 +78,6 @@ }; }; -&tve { +&panel_dpi { status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts index 1bbf24ad308a..2f06ad61a766 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts @@ -13,12 +13,10 @@ }; &iomuxc { - imx53-qsrb { - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 /* IRQ */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 /* IRQ */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts index 55435dfdff8a..386371c816f4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts @@ -98,140 +98,138 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-smd { - pinctrl_hog: hoggrp { - fsl,pins = < - MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 - MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 - MX53_PAD_EIM_EB2__GPIO2_30 0x80000000 - MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 - MX53_PAD_EIM_D19__GPIO3_19 0x80000000 - MX53_PAD_KEY_ROW2__GPIO4_11 0x80000000 - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 + MX53_PAD_EIM_EB2__GPIO2_30 0x80000000 + MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 + MX53_PAD_EIM_D19__GPIO3_19 0x80000000 + MX53_PAD_KEY_ROW2__GPIO4_11 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 - MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 - MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; - pinctrl_esdhc2: esdhc2grp { - fsl,pins = < - MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 - MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 - MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 - MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 - MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 - MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 - >; - }; + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 + >; + }; - pinctrl_esdhc3: esdhc3grp { - fsl,pins = < - MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 - MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 - MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 - MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 - MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 - MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 - MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 - MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 - MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 - MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 - >; - }; + pinctrl_esdhc3: esdhc3grp { + fsl,pins = < + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 - MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 + MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 - MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 + >; + }; - pinctrl_ipu_csi0: ipucsi0grp { - fsl,pins = < - MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4 - MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4 - MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4 - MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4 - MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4 - MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4 - MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4 - MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4 - MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4 - MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4 - MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4 - MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4 - >; - }; + pinctrl_ipu_csi0: ipucsi0grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4 + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4 + MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4 + >; + }; - pinctrl_ov5642: ov5642grp { - fsl,pins = < - MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4 - MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4 - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 - >; - }; + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4 + MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4 + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 - MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi index 294811bfc8d2..0f0245df380f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi @@ -61,153 +61,143 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-tqma53 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */ - MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */ - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */ - MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */ - MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */ - MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */ - MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */ - MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */ - MX53_PAD_GPIO_3__GPIO1_3 0x80000000 - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */ - MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */ - >; - }; - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 - >; - }; - - pinctrl_can1: can1grp { - fsl,pins = < - MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000 - MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000 - >; - }; - - pinctrl_can2: can2grp { - fsl,pins = < - MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 - MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 - >; - }; - - pinctrl_cspi: cspigrp { - fsl,pins = < - MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5 - MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5 - MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 - MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 - MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 - >; - }; - - pinctrl_esdhc2: esdhc2grp { - fsl,pins = < - MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 - MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 - MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 - MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 - MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 - MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 - >; - }; - - pinctrl_esdhc2_cdwp: esdhc2cdwp { - fsl,pins = < - MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */ - MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */ - >; - }; - - pinctrl_esdhc3: esdhc3grp { - fsl,pins = < - MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 - MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 - MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 - MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 - MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 - MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 - MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 - MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 - MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 - MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 - >; - }; - - pinctrl_fec: fecgrp { - fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 - MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 - MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */ + MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */ + MX53_PAD_GPIO_3__GPIO1_3 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */ + MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */ + >; }; -}; -&pwm1 { - #pwm-cells = <2>; -}; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000 + MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 + >; + }; + + pinctrl_cspi: cspigrp { + fsl,pins = < + MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5 + MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5 + MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 + >; + }; + + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 + >; + }; + + pinctrl_esdhc2_cdwp: esdhc2cdwpgrp { + fsl,pins = < + MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */ + MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */ + >; + }; + + pinctrl_esdhc3: esdhc3grp { + fsl,pins = < + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 + >; + }; -&pwm2 { - #pwm-cells = <2>; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + >; + }; }; &uart1 { @@ -262,8 +252,8 @@ interrupts = <6 4>; /* PATA_DATA6, active high */ }; - sensor1: lm75@48 { - compatible = "lm75"; + sensor1: temperature-sensor@48 { + compatible = "national,lm75b"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts index a7f77527269d..5f62c99909c5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts @@ -67,7 +67,7 @@ }; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -83,7 +83,7 @@ pixelclk-active = <0>; }; - ETV570 { + timing-etc570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -99,7 +99,7 @@ pixelclk-active = <0>; }; - ET0350 { + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -115,7 +115,7 @@ pixelclk-active = <0>; }; - ET0430 { + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -131,7 +131,7 @@ pixelclk-active = <1>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -147,7 +147,7 @@ pixelclk-active = <0>; }; - ET0700 { /* same as ET0500 */ + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -163,7 +163,7 @@ pixelclk-active = <0>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; @@ -262,66 +262,64 @@ }; &iomuxc { - imx53-tx53-x03x { - pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 { - fsl,pins = < - MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */ - MX53_PAD_EIM_A16__GPIO2_22 0x04 /* Reset */ - MX53_PAD_EIM_A17__GPIO2_21 0x04 /* Wake */ - >; - }; + pinctrl_edt_ft5x06_1: edt-ft5x06-1-grp { + fsl,pins = < + MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */ + MX53_PAD_EIM_A16__GPIO2_22 0x04 /* Reset */ + MX53_PAD_EIM_A17__GPIO2_21 0x04 /* Wake */ + >; + }; - pinctrl_kpp: kppgrp { - fsl,pins = < - MX53_PAD_GPIO_9__KPP_COL_6 0x1f4 - MX53_PAD_GPIO_4__KPP_COL_7 0x1f4 - MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4 - MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4 - MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4 - MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4 - MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4 - MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4 - >; - }; + pinctrl_kpp: kppgrp { + fsl,pins = < + MX53_PAD_GPIO_9__KPP_COL_6 0x1f4 + MX53_PAD_GPIO_4__KPP_COL_7 0x1f4 + MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4 + MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4 + MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4 + MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4 + MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4 + MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4 + >; + }; - pinctrl_rgb24_vga1: rgb24-vgagrp1 { - fsl,pins = < - MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 - MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 - MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 - MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 - MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 - MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 - MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 - MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 - MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 - MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 - MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 - MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 - MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 - MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 - MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 - MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 - MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 - MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 - MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 - MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 - MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 - MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 - MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 - MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 - MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 - MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 - MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 - MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 - >; - }; + pinctrl_rgb24_vga1: rgb24-vga1grp { + fsl,pins = < + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 + >; + }; - pinctrl_tsc2007: tsc2007grp { - fsl,pins = < - MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */ - >; - }; + pinctrl_tsc2007: tsc2007grp { + fsl,pins = < + MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts index 6cdf2082c742..9c9122da3737 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts @@ -139,42 +139,40 @@ }; &iomuxc { - imx53-tx53-x13x { - pinctrl_lvds0: lvds0grp { - fsl,pins = < - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 - >; - }; + pinctrl_lvds0: lvds0grp { + fsl,pins = < + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + >; + }; - pinctrl_lvds1: lvds1grp { - fsl,pins = < - MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 - MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 - MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 - MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 - MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 - >; - }; + pinctrl_lvds1: lvds1grp { + fsl,pins = < + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>; + }; - pinctrl_eeti1: eeti1grp { - fsl,pins = < - MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */ - >; - }; + pinctrl_eeti1: eeti1grp { + fsl,pins = < + MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */ + >; + }; - pinctrl_eeti2: eeti2grp { - fsl,pins = < - MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */ - >; - }; + pinctrl_eeti2: eeti2grp { + fsl,pins = < + MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */ + >; }; }; @@ -191,7 +189,7 @@ display-timings { native-mode = <&lvds0_timing0>; - lvds0_timing0: hsd100pxn1 { + lvds0_timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -207,7 +205,7 @@ pixelclk-active = <1>; }; - lvds0_timing1: nl12880bc20 { + lvds0_timing1: timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; @@ -233,7 +231,7 @@ display-timings { native-mode = <&lvds1_timing0>; - lvds1_timing0: hsd100pxn1 { + lvds1_timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi index a439a47fb65a..29e3f5f37c25 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi @@ -257,261 +257,259 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-tx53 { - pinctrl_hog: hoggrp { - /* pins not in use by any device on the Starterkit board series */ - fsl,pins = < - /* CMOS Sensor Interface */ - MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4 - MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4 - MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4 - MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4 - MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4 - MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4 - MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4 - MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4 - MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4 - MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4 - MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4 - MX53_PAD_GPIO_0__GPIO1_0 0x1f4 - /* Module Specific Signal */ - /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */ - /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */ - MX53_PAD_EIM_D29__GPIO3_29 0x1f4 - MX53_PAD_EIM_EB3__GPIO2_31 0x1f4 - /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */ - /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */ - MX53_PAD_EIM_A19__GPIO2_19 0x1f4 - MX53_PAD_EIM_A20__GPIO2_18 0x1f4 - MX53_PAD_EIM_A21__GPIO2_17 0x1f4 - MX53_PAD_EIM_A22__GPIO2_16 0x1f4 - MX53_PAD_EIM_A23__GPIO6_6 0x1f4 - MX53_PAD_EIM_A24__GPIO5_4 0x1f4 - MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4 - MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4 - MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4 - MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4 - /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */ - /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */ - MX53_PAD_GPIO_13__GPIO4_3 0x1f4 - MX53_PAD_EIM_CS0__GPIO2_23 0x1f4 - MX53_PAD_EIM_CS1__GPIO2_24 0x1f4 - MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4 - MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4 - MX53_PAD_EIM_EB0__GPIO2_28 0x1f4 - MX53_PAD_EIM_EB1__GPIO2_29 0x1f4 - MX53_PAD_EIM_OE__GPIO2_25 0x1f4 - MX53_PAD_EIM_LBA__GPIO2_27 0x1f4 - MX53_PAD_EIM_RW__GPIO2_26 0x1f4 - MX53_PAD_EIM_DA8__GPIO3_8 0x1f4 - MX53_PAD_EIM_DA9__GPIO3_9 0x1f4 - MX53_PAD_EIM_DA10__GPIO3_10 0x1f4 - MX53_PAD_EIM_DA11__GPIO3_11 0x1f4 - MX53_PAD_EIM_DA12__GPIO3_12 0x1f4 - MX53_PAD_EIM_DA13__GPIO3_13 0x1f4 - MX53_PAD_EIM_DA14__GPIO3_14 0x1f4 - MX53_PAD_EIM_DA15__GPIO3_15 0x1f4 - >; - }; - - pinctrl_can1: can1grp { - fsl,pins = < - MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 - MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 + pinctrl_hog: hoggrp { + /* pins not in use by any device on the Starterkit board series */ + fsl,pins = < + /* CMOS Sensor Interface */ + MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4 + MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4 + MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4 + MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4 + MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4 + MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4 + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4 + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4 + MX53_PAD_GPIO_0__GPIO1_0 0x1f4 + /* Module Specific Signal */ + /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */ + /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */ + MX53_PAD_EIM_D29__GPIO3_29 0x1f4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1f4 + /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */ + /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */ + MX53_PAD_EIM_A19__GPIO2_19 0x1f4 + MX53_PAD_EIM_A20__GPIO2_18 0x1f4 + MX53_PAD_EIM_A21__GPIO2_17 0x1f4 + MX53_PAD_EIM_A22__GPIO2_16 0x1f4 + MX53_PAD_EIM_A23__GPIO6_6 0x1f4 + MX53_PAD_EIM_A24__GPIO5_4 0x1f4 + MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4 + MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4 + MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4 + MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4 + /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */ + /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */ + MX53_PAD_GPIO_13__GPIO4_3 0x1f4 + MX53_PAD_EIM_CS0__GPIO2_23 0x1f4 + MX53_PAD_EIM_CS1__GPIO2_24 0x1f4 + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4 + MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4 + MX53_PAD_EIM_EB0__GPIO2_28 0x1f4 + MX53_PAD_EIM_EB1__GPIO2_29 0x1f4 + MX53_PAD_EIM_OE__GPIO2_25 0x1f4 + MX53_PAD_EIM_LBA__GPIO2_27 0x1f4 + MX53_PAD_EIM_RW__GPIO2_26 0x1f4 + MX53_PAD_EIM_DA8__GPIO3_8 0x1f4 + MX53_PAD_EIM_DA9__GPIO3_9 0x1f4 + MX53_PAD_EIM_DA10__GPIO3_10 0x1f4 + MX53_PAD_EIM_DA11__GPIO3_11 0x1f4 + MX53_PAD_EIM_DA12__GPIO3_12 0x1f4 + MX53_PAD_EIM_DA13__GPIO3_13 0x1f4 + MX53_PAD_EIM_DA14__GPIO3_14 0x1f4 + MX53_PAD_EIM_DA15__GPIO3_15 0x1f4 >; - }; + }; - pinctrl_can2: can2grp { - fsl,pins = < - MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 - MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 + >; + }; - pinctrl_can_xcvr: can-xcvrgrp { - fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */ - }; + pinctrl_can2: can2grp { + fsl,pins = < + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 + >; + }; - pinctrl_ds1339: ds1339grp { - fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>; - }; + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */ + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 - MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 - MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 - MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 - MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 - MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 - >; - }; + pinctrl_ds1339: ds1339grp { + fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 - MX53_PAD_EIM_D24__GPIO3_24 0x1f0 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 + MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 + MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 + >; + }; - pinctrl_esdhc2: esdhc2grp { - fsl,pins = < - MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 - MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 - MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 - MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 - MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 - MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 - MX53_PAD_EIM_D25__GPIO3_25 0x1f0 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_EIM_D24__GPIO3_24 0x1f0 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 - >; - }; + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 + MX53_PAD_EIM_D25__GPIO3_25 0x1f0 + >; + }; - pinctrl_gpio_key: gpio-keygrp { - fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 - MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 - >; - }; + pinctrl_gpio_key: gpio-keygrp { + fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>; + }; - pinctrl_i2c1_gpio: i2c1-gpiogrp { - fsl,pins = < - MX53_PAD_EIM_D21__GPIO3_21 0x400001e6 - MX53_PAD_EIM_D28__GPIO3_28 0x400001e6 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4 - MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 - >; - }; + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D21__GPIO3_21 0x400001e6 + MX53_PAD_EIM_D28__GPIO3_28 0x400001e6 + >; + }; - pinctrl_i2c3_gpio: i2c3-gpiogrp { - fsl,pins = < - MX53_PAD_GPIO_3__GPIO1_3 0x400001e6 - MX53_PAD_GPIO_6__GPIO1_6 0x400001e6 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4 + MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 + >; + }; - pinctrl_nand: nandgrp { - fsl,pins = < - MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 - MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 - MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 - MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 - MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 - MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 - MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 - MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4 - MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4 - MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4 - MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4 - MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4 - MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4 - MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4 - MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4 - >; - }; + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX53_PAD_GPIO_3__GPIO1_3 0x400001e6 + MX53_PAD_GPIO_6__GPIO1_6 0x400001e6 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 - >; - }; + pinctrl_nand: nandgrp { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4 + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4 + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4 + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4 + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4 + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4 + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4 + MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4 + >; + }; - pinctrl_ssi1: ssi1grp { - fsl,pins = < - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 + >; + }; - pinctrl_ssi2: ssi2grp { - fsl,pins = < - MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 - MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 - MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 - MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 - MX53_PAD_EIM_D27__GPIO3_27 0x1f0 - >; - }; + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 + >; + }; - pinctrl_stk5led: stk5ledgrp { - fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>; - }; + pinctrl_ssi2: ssi2grp { + fsl,pins = < + MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 + MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 + MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 + MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 + MX53_PAD_EIM_D27__GPIO3_27 0x1f0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 - MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 - MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 - >; - }; + pinctrl_stk5led: stk5ledgrp { + fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 - MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 - MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 + MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 - MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */ - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 + >; + }; - pinctrl_usbh1_vbus: usbh1-vbusgrp { - fsl,pins = < - MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */ - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */ + >; + }; - pinctrl_usbotg_vbus: usbotg-vbusgrp { - fsl,pins = < - MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */ - MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */ - >; - }; + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */ + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbusgrp { + fsl,pins = < + MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */ + MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts index ae53d178a683..ae9cc04f23eb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts @@ -40,67 +40,65 @@ &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - imx53-voipac { - pinctrl_hog: hoggrp { - fsl,pins = < - /* SD2_CD */ - MX53_PAD_EIM_D25__GPIO3_25 0x80000000 - /* SD2_WP */ - MX53_PAD_EIM_A19__GPIO2_19 0x80000000 - >; - }; + pinctrl-0 = <&pinctrl_hogbsb>; + + pinctrl_hogbsb: hogbsbgrp { + fsl,pins = < + /* SD2_CD */ + MX53_PAD_EIM_D25__GPIO3_25 0x80000000 + /* SD2_WP */ + MX53_PAD_EIM_A19__GPIO2_19 0x80000000 + >; + }; - led_pin_gpio: led_gpio { - fsl,pins = < - MX53_PAD_EIM_D29__GPIO3_29 0x80000000 - MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 - >; - }; + led_pin_gpio: ledgpiogrp { + fsl,pins = < + MX53_PAD_EIM_D29__GPIO3_29 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + >; + }; - /* Keyboard controller */ - pinctrl_kpp_1: kppgrp-1 { - fsl,pins = < - MX53_PAD_GPIO_9__KPP_COL_6 0xe8 - MX53_PAD_GPIO_4__KPP_COL_7 0xe8 - MX53_PAD_KEY_COL2__KPP_COL_2 0xe8 - MX53_PAD_KEY_COL3__KPP_COL_3 0xe8 - MX53_PAD_KEY_COL4__KPP_COL_4 0xe8 - MX53_PAD_GPIO_2__KPP_ROW_6 0xe0 - MX53_PAD_GPIO_5__KPP_ROW_7 0xe0 - MX53_PAD_KEY_ROW2__KPP_ROW_2 0xe0 - MX53_PAD_KEY_ROW3__KPP_ROW_3 0xe0 - MX53_PAD_KEY_ROW4__KPP_ROW_4 0xe0 - >; - }; + /* Keyboard controller */ + pinctrl_kpp_1: kpp1grp { + fsl,pins = < + MX53_PAD_GPIO_9__KPP_COL_6 0xe8 + MX53_PAD_GPIO_4__KPP_COL_7 0xe8 + MX53_PAD_KEY_COL2__KPP_COL_2 0xe8 + MX53_PAD_KEY_COL3__KPP_COL_3 0xe8 + MX53_PAD_KEY_COL4__KPP_COL_4 0xe8 + MX53_PAD_GPIO_2__KPP_ROW_6 0xe0 + MX53_PAD_GPIO_5__KPP_ROW_7 0xe0 + MX53_PAD_KEY_ROW2__KPP_ROW_2 0xe0 + MX53_PAD_KEY_ROW3__KPP_ROW_3 0xe0 + MX53_PAD_KEY_ROW4__KPP_ROW_4 0xe0 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 + >; + }; - pinctrl_esdhc2: esdhc2grp { - fsl,pins = < - MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 - MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 - MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 - MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 - MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 - MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 - >; - }; + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000 - MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000 + MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi index c0622cf7188c..6dc70a92d831 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi @@ -37,74 +37,72 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx53-voipac { - pinctrl_hog: hoggrp { - fsl,pins = < - /* Make DA9053 regulator functional */ - MX53_PAD_GPIO_16__GPIO7_11 0x80000000 - /* FEC Power enable */ - MX53_PAD_GPIO_11__GPIO4_1 0x80000000 - /* FEC RST */ - MX53_PAD_GPIO_12__GPIO4_2 0x80000000 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + /* Make DA9053 regulator functional */ + MX53_PAD_GPIO_16__GPIO7_11 0x80000000 + /* FEC Power enable */ + MX53_PAD_GPIO_11__GPIO4_1 0x80000000 + /* FEC RST */ + MX53_PAD_GPIO_12__GPIO4_2 0x80000000 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 - MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 - MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 - MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 + MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; - pinctrl_nand: nandgrp { - fsl,pins = < - MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 - MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 - MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 - MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 - MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 - MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 - MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 - MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 - MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 - MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 - MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 - MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 - MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 - MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 - MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 - >; - }; + pinctrl_nand: nandgrp { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 + MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 + MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 + MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 + MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 + MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 + MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 + MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 + MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53.dtsi index 07658e477095..faac7cc249d0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53.dtsi @@ -458,7 +458,7 @@ clocks = <&clks IMX5_CLK_SRTC_GATE>; }; - iomuxc: iomuxc@53fa8000 { + iomuxc: pinctrl@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; }; @@ -598,7 +598,7 @@ clks: ccm@53fd4000 { compatible = "fsl,imx53-ccm"; reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; + interrupts = <71>, <72>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi index d477a937b47a..1e0a588b2a15 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi @@ -534,7 +534,7 @@ >; }; - pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz { + pinctrl_usdhc2_100mhz: h100-usdhc2-100mhzgrp { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 @@ -546,7 +546,7 @@ >; }; - pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz { + pinctrl_usdhc2_200mhz: h100-usdhc2-200mhzgrp { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts index dfa6f64d43cc..c9b2ea2b24b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts @@ -82,11 +82,10 @@ compatible = "lg,lg4573"; spi-max-frequency = <10000000>; reg = <0>; - power-on-delay = <10>; display-timings { - 480x800p57 { - native-mode; + native-mode = <&timing0>; + timing0: timing-480x800p57 { clock-frequency = <27000027>; hactive = <480>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts index cc861a43eb58..9ec038f1d0ff 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts @@ -14,7 +14,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; @@ -36,8 +36,8 @@ status = "okay"; display-timings { - 480x800p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-480x800p60 { clock-frequency = <30000000>; hactive = <480>; vactive = <800>; @@ -79,6 +79,5 @@ }; &pwm1 { - #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts index b6cb78870cd5..b3129832f471 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts @@ -25,8 +25,8 @@ status = "okay"; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <33246000>; hactive = <800>; vactive = <480>; @@ -49,7 +49,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 3000>; + pwms = <&pwm3 0 3000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; pinctrl-names = "default"; @@ -69,6 +69,5 @@ }; &pwm3 { - #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts index 82a0d1a28d12..987058ab0a9b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts @@ -52,7 +52,7 @@ &pinctrl_weim_gpio_5 >; - pinctrl_gpio_aster: gpioaster { + pinctrl_gpio_aster: gpioastergrp { fsl,pins = < MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts new file mode 100644 index 000000000000..44c78c07f431 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-aster.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Aster Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts new file mode 100644 index 000000000000..93fd0af53a3c --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-eval-v3.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Evaluation Board V3"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts new file mode 100644 index 000000000000..92d41fc9a13f --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-iris-v2.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris V2 Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts new file mode 100644 index 000000000000..c8957948c887 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-iris.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts new file mode 100644 index 000000000000..38235925257a --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Marek Vasut <marex@denx.de> + * + * DHCOM iMX6 variant: + * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2 + * DHCOM PCB number: 493-400 or newer + * PDK2 PCB number: 516-400 or newer + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-dhcom-som.dtsi" +#include "imx6qdl-dhcom-pdk2.dtsi" + +/ { + model = "DH electronics i.MX6DL DHCOM on Premium Developer Kit (2)"; + compatible = "dh,imx6dl-dhcom-pdk2", "dh,imx6dl-dhcom-som", + "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts index 038bb0025556..775caf8208c5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts @@ -3,7 +3,7 @@ * Copyright (C) 2021 DH electronics GmbH * * DHCOM iMX6 variant: - * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2 + * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2 * DHCOM PCB number: 493-300 or newer * PicoITX PCB number: 487-600 or newer */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts index 33825b5a8f26..5ed55f74b398 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts @@ -139,7 +139,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - pinctrl_hog: hog { + pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts new file mode 100644 index 000000000000..6a0c53f23a15 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include "imx6qdl-kontron-samx6i-ads2.dtsi" + +/ { + model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier"; + compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi index a864fdbd5f16..5a9b819d7ee8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi @@ -7,6 +7,6 @@ #include "imx6qdl-kontron-samx6i.dtsi" / { - model = "Kontron SMARC sAMX6i Dual-Lite/Solo"; + model = "Kontron SMARC-sAMX6i Dual-Lite/Solo"; compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts index 028951955bde..ec5a9bf40677 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts @@ -21,7 +21,7 @@ backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ + pwms = <&pwm3 0 25000 0>; /* 25000ns -> 40kHz */ brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>; default-brightness-level = <7>; }; @@ -303,7 +303,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; @@ -396,7 +395,7 @@ >; }; - pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */ + pinctrl_ipu1_lcdif: pinctrlipu1lcdifgrp { /* parallel port 24-bit */ fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts index 773a84a5739d..0b1275a8891f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts @@ -773,7 +773,7 @@ >; }; - pinctrl_pca9539: pca9539 { + pinctrl_pca9539: pca9539grp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts index 36b031236e47..e543c4f2bc94 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts @@ -133,7 +133,7 @@ }; &iomuxc { - pinctrl_can1phy: can1phy { + pinctrl_can1phy: can1phygrp { fsl,pins = < /* CAN1_SR */ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts index 568e98cb62aa..29dc6875ab66 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts @@ -507,7 +507,7 @@ >; }; - pinctrl_can1phy: can1phy { + pinctrl_can1phy: can1phygrp { fsl,pins = < /* CAN1_SR */ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi index 8a637fdff073..de80ca141bca 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi @@ -352,261 +352,259 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - qmx6mux: imx6qdl-qmx6 { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x110b0 /* Q7[67] HDA_SDO */ - MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x30b0 /* Q7[59] HDA_SYNC */ - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x30b0 /* Q7[65] HDA_SDI */ - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x30b0 /* Q7[63] HDA_BITCLK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x110b0 /* Q7[67] HDA_SDO */ + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x30b0 /* Q7[59] HDA_SYNC */ + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x30b0 /* Q7[65] HDA_SDI */ + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x30b0 /* Q7[63] HDA_BITCLK */ + >; + }; - /* PHY is on System on Module, Q7[3-15] have Ethernet lines */ - pinctrl_enet: enet { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - >; - }; + /* PHY is on System on Module, Q7[3-15] have Ethernet lines */ + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* PCIE_WAKE_B */ - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 /* I2C multiplexer */ - MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* SD4_CD# */ - MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* SD4_WP */ - MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* Camera MCLK */ - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* PCIE_WAKE_B */ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 /* I2C multiplexer */ + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* SD4_CD# */ + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* SD4_WP */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* Camera MCLK */ + >; + }; - pinctrl_i2c1: i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 /* Q7[66] I2C_CLK */ - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 /* Q7[68] I2C_DAT */ - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 /* Q7[66] I2C_CLK */ + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 /* Q7[68] I2C_DAT */ + >; + }; - pinctrl_i2c1_gpio: i2c1-gpio { - fsl,pins = < - MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /* Q7[66] I2C_CLK */ - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0 /* Q7[68] I2C_DAT */ - >; - }; + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /* Q7[66] I2C_CLK */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0 /* Q7[68] I2C_DAT */ + >; + }; - pinctrl_i2c2: i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */ - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */ - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */ + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */ + >; + }; - pinctrl_i2c2_gpio: i2c2-gpio { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */ - MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */ - >; - }; + pinctrl_i2c2_gpio: i2c2-gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */ + >; + }; - pinctrl_i2c3: i2c3 { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 /* Q7[60] SMB_CLK */ - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 /* Q7[62] SMB_DAT */ - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 /* Q7[60] SMB_CLK */ + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 /* Q7[62] SMB_DAT */ + >; + }; - pinctrl_i2c3_gpio: i2c3-gpio { - fsl,pins = < - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 /* Q7[60] SMB_CLK */ - MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* Q7[62] SMB_DAT */ - >; - }; + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 /* Q7[60] SMB_CLK */ + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* Q7[62] SMB_DAT */ + >; + }; - pinctrl_phy_reset: phy-reset { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* RGMII Phy Reset */ - >; - }; + pinctrl_phy_reset: phy-resetgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* RGMII Phy Reset */ + >; + }; - pinctrl_pwm4: pwm4 { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */ - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */ + >; + }; - pinctrl_q7_backlight_enable: q7-backlight-enable { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* Q7[112] LVDS_BLEN */ - >; - }; + pinctrl_q7_backlight_enable: q7-backlight-enablegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* Q7[112] LVDS_BLEN */ + >; + }; - pinctrl_q7_gpio0: q7-gpio0 { - fsl,pins = < - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /* Q7[185] GPIO0 */ - >; - }; + pinctrl_q7_gpio0: q7-gpio0grp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /* Q7[185] GPIO0 */ + >; + }; - pinctrl_q7_gpio1: q7-gpio1 { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* Q7[186] GPIO1 */ - >; - }; + pinctrl_q7_gpio1: q7-gpio1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* Q7[186] GPIO1 */ + >; + }; - pinctrl_q7_gpio2: q7-gpio2 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 /* Q7[187] GPIO2 */ - >; - }; + pinctrl_q7_gpio2: q7-gpio2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 /* Q7[187] GPIO2 */ + >; + }; - pinctrl_q7_gpio3: q7-gpio3 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 /* Q7[188] GPIO3 */ - >; - }; + pinctrl_q7_gpio3: q7-gpio3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 /* Q7[188] GPIO3 */ + >; + }; - pinctrl_q7_gpio4: q7-gpio4 { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* Q7[189] GPIO4 */ - >; - }; + pinctrl_q7_gpio4: q7-gpio4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* Q7[189] GPIO4 */ + >; + }; - pinctrl_q7_gpio5: q7-gpio5 { - fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* Q7[190] GPIO5 */ - >; - }; + pinctrl_q7_gpio5: q7-gpio5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* Q7[190] GPIO5 */ + >; + }; - pinctrl_q7_gpio6: q7-gpio6 { - fsl,pins = < - MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */ - >; - }; + pinctrl_q7_gpio6: q7-gpio6grp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */ + >; + }; - pinctrl_q7_gpio7: q7-gpio7 { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* Q7[192] GPIO7 */ - >; - }; + pinctrl_q7_gpio7: q7-gpio7grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* Q7[192] GPIO7 */ + >; + }; - pinctrl_q7_hda_reset: q7-hda-reset { - fsl,pins = < - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 /* Q7[61] HDA_RST_N */ - >; - }; + pinctrl_q7_hda_reset: q7-hda-resetgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 /* Q7[61] HDA_RST_N */ + >; + }; - pinctrl_q7_lcd_power: lcd-power { - fsl,pins = < - MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* Q7[111] LVDS_PPEN */ - >; - }; + pinctrl_q7_lcd_power: lcd-powergrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* Q7[111] LVDS_PPEN */ + >; + }; - pinctrl_q7_sdio_power: q7-sdio-power { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 /* Q7[47] SDIO_PWR# */ - >; - }; + pinctrl_q7_sdio_power: q7-sdio-powergrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 /* Q7[47] SDIO_PWR# */ + >; + }; - pinctrl_q7_sleep_button: q7-sleep-button { - fsl,pins = < - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* Q7[21] SLP_BTN# */ - >; - }; + pinctrl_q7_sleep_button: q7-sleep-buttongrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* Q7[21] SLP_BTN# */ + >; + }; - pinctrl_q7_spi_cs1: spi-cs1 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 /* Q7[202] SPI_CS1# */ - >; - }; + pinctrl_q7_spi_cs1: spi-cs1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 /* Q7[202] SPI_CS1# */ + >; + }; - /* SPI1 bus does not leave System on Module */ - pinctrl_spi1: spi1 { - fsl,pins = < - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 - >; - }; + /* SPI1 bus does not leave System on Module */ + pinctrl_spi1: spi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; - /* Debug connector on Q7 module */ - pinctrl_uart2: uart2 { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + /* Debug connector on Q7 module */ + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3 { - fsl,pins = < - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 /* Q7[177] UART0_RX */ - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 /* Q7[171] UART0_TX */ - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 /* Q7[177] UART0_RX */ + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 /* Q7[171] UART0_TX */ + >; + }; - pinctrl_usbotg: usbotg { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */ + >; + }; - /* µSD card slot on Q7 module */ - pinctrl_usdhc2: usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2_CD */ - >; - }; + /* µSD card slot on Q7 module */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2_CD */ + >; + }; - /* eMMC module on Q7 module */ - pinctrl_usdhc3: usdhc3 { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + /* eMMC module on Q7 module */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; - pinctrl_usdhc4: usdhc4 { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 /* Q7[45] SDIO_CMD */ - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 /* Q7[42] SDIO_CLK */ - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 /* Q7[48] SDIO_DAT1 */ - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 /* Q7[49] SDIO_DAT0 */ - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 /* Q7[50] SDIO_DAT3 */ - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 /* Q7[51] SDIO_DAT2 */ - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 /* Q7[45] SDIO_CMD */ + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 /* Q7[42] SDIO_CLK */ + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 /* Q7[48] SDIO_DAT1 */ + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 /* Q7[49] SDIO_DAT0 */ + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 /* Q7[50] SDIO_DAT3 */ + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 /* Q7[51] SDIO_DAT2 */ + >; + }; - pinctrl_wdog: wdog { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 /* Watchdog output signal */ - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 /* Watchdog output signal */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts index 114739d10447..e9ac4768f36c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts @@ -391,208 +391,206 @@ &iomuxc { pinctrl-names = "default"; - imx6-riotboard { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */ + >; + }; - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */ - MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */ - MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 - >; - }; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */ + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + >; + }; - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */ - MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */ - >; - }; + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; - pinctrl_led: ledgrp { - fsl,pins = < - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* user led0 */ - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* user led1 */ - >; - }; + pinctrl_led: ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* user led0 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* user led1 */ + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2 CD */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* SD2 WP */ - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* SD2 WP */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* SD3 CD */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* SD3 WP */ - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* SD3 CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* SD3 WP */ + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x17059 /* SD4 RST (eMMC) */ - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x17059 /* SD4 RST (eMMC) */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts index 51a9bb9d6bc2..7436626673fc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts @@ -51,7 +51,6 @@ &backlight { pwms = <&pwm2 0 500000 0>; - /delete-property/ turn-on-delay-ms; }; &can1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi index c32ea040fecd..8bc6376d0dc1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi @@ -506,7 +506,7 @@ >; }; - pinctrl_usbh1_vbus: usbh1-vbus { + pinctrl_usbh1_vbus: usbh1-vbusgrp { fsl,pins = < MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 >; @@ -519,7 +519,7 @@ >; }; - pinctrl_usbotg_vbus: usbotg-vbus { + pinctrl_usbotg_vbus: usbotg-vbusgrp { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi index 52a0f6ee426f..2f42c56c21f6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi @@ -274,24 +274,24 @@ led@0 { chan-name = "R"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; + led-cur = /bits/ 8 <0x6e>; + max-cur = /bits/ 8 <0xc8>; reg = <0>; color = <LED_COLOR_ID_RED>; }; led@1 { chan-name = "G"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; reg = <1>; color = <LED_COLOR_ID_GREEN>; }; led@2 { chan-name = "B"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; reg = <2>; color = <LED_COLOR_ID_BLUE>; }; @@ -500,7 +500,7 @@ >; }; - pinctrl_usbh1_vbus: usbh1-vbus { + pinctrl_usbh1_vbus: usbh1-vbusgrp { fsl,pins = < MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 >; @@ -513,7 +513,7 @@ >; }; - pinctrl_usbotg_vbus: usbotg-vbus { + pinctrl_usbotg_vbus: usbotg-vbusgrp { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts new file mode 100644 index 000000000000..908dab57fd87 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-eval-v1.2.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board v1.2"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts new file mode 100644 index 000000000000..5463d4127382 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-eval.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts new file mode 100644 index 000000000000..84eabf81ba84 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-ixora-v1.1.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.1"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts new file mode 100644 index 000000000000..d7cfab4de457 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-ixora-v1.2.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.2"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts new file mode 100644 index 000000000000..189b074e31ce --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-ixora.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts index 631d6d690959..235148c1edf1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts @@ -55,114 +55,112 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6q-arm2 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; - pinctrl_usdhc3_cdwp: usdhc3cdwp { - fsl,pins = < - MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 - >; - }; + pinctrl_usdhc3_cdwp: usdhc3cdwpgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi index f266f1b7e0cf..d77472519086 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi @@ -55,7 +55,7 @@ compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_display>; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 @@ -349,7 +349,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -624,7 +623,7 @@ >; }; - pinctrl_usdhc3_reset: usdhc3grp-reset { + pinctrl_usdhc3_reset: usdhc3-resetgrp { fsl,pins = < MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts index 02648806c275..d3f14b4d3b51 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts @@ -36,7 +36,7 @@ backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm1 0 200000>; + pwms = <&pwm1 0 200000 0>; brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; num-interpolated-steps = <10>; default-brightness-level = <60>; @@ -117,14 +117,14 @@ color = <LED_COLOR_ID_RED>; max-brightness = <248>; default-state = "off"; - pwms = <&pwm2 0 500000>; + pwms = <&pwm2 0 500000 0>; }; led_white: led-1 { color = <LED_COLOR_ID_WHITE>; max-brightness = <248>; default-state = "off"; - pwms = <&pwm3 0 500000>; + pwms = <&pwm3 0 500000 0>; linux,default-trigger = "heartbeat"; }; }; @@ -484,28 +484,24 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index c1ae7c47b442..aa1adcc74019 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -94,7 +94,7 @@ mdio-gpio0 = &mdio0; }; - mdio0: mdio-gpio { + mdio0: mdio { compatible = "virtual,mdio-gpio"; gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */ <&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts index 95b49fc83f7b..299106fbe51c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -127,12 +127,21 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts index d4d57370615d..6efd7e9fc1b1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts @@ -4,7 +4,7 @@ * Copyright (C) 2018 Marek Vasut <marex@denx.de> * * DHCOM iMX6 variant: - * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2 + * DHCM-iMX6Q-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2 * DHCOM PCB number: 493-300 or newer * PDK2 PCB number: 516-400 or newer */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts index 9f7ac7158c46..c5525b2c1dbd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts @@ -283,138 +283,136 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6q-dmo-edmqmx6 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000 - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000 + >; + }; - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + >; + }; - pinctrl_ecspi5: ecspi5rp-1 { - fsl,pins = < - MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 - MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 - MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 - >; - }; + pinctrl_ecspi5: ecspi5rp-1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1 + >; + }; - pinctrl_pfuze: pfuze100grp1 { - fsl,pins = < - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 - >; - }; + pinctrl_pfuze: pfuze100grp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 + >; + }; - pinctrl_stmpe1: stmpe1grp { - fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; - }; + pinctrl_stmpe1: stmpe1grp { + fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; + }; - pinctrl_stmpe2: stmpe2grp { - fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>; - }; + pinctrl_stmpe2: stmpe2grp { + fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts index ce55c9558679..e0d29b07fbb1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts @@ -70,58 +70,56 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6q-gk802 { - pinctrl_hog: hoggrp { - fsl,pins = < - /* Recovery button, active-low */ - MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x100b1 - /* RTL8192CU enable GPIO, active-low */ - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + /* Recovery button, active-low */ + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x100b1 + /* RTL8192CU enable GPIO, active-low */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts index a603562ea49a..46e011a363e8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts @@ -217,120 +217,118 @@ }; &iomuxc { - h100 { - pinctrl_h100_hdmi: h100-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_h100_hdmi: h100-hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_h100_i2c1: h100-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_h100_i2c1: h100-i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_h100_i2c2: h100-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_h100_i2c2: h100-i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_h100_leds: pinctrl-h100-leds { - fsl,pins = < - MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 - >; - }; + pinctrl_h100_leds: pinctrl-h100-ledsgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 + >; + }; - pinctrl_h100_reg_hdmi: h100-reg-hdmi { - fsl,pins = < - MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 - >; - }; + pinctrl_h100_reg_hdmi: h100-reg-hdmigrp { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + >; + }; - pinctrl_h100_sgtl5000: h100-sgtl5000 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 - MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 - MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 - MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_h100_sgtl5000: h100-sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_h100_tc358743: h100-tc358743 { - fsl,pins = < - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 - >; - }; + pinctrl_h100_tc358743: h100-tc358743grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + >; + }; - pinctrl_h100_uart2: h100-uart2 { - fsl,pins = < - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - >; - }; + pinctrl_h100_uart2: h100-uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; - pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; + pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbusgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; - pinctrl_h100_usbotg_id: hummingboard-usbotg-id { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 - >; - }; + pinctrl_h100_usbotg_id: hummingboard-usbotg-idgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + >; + }; - pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 - >; - }; + pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; - pinctrl_h100_usdhc2: h100-usdhc2 { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 - >; - }; + pinctrl_h100_usdhc2: h100-usdhc2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 + >; + }; - pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 - >; - }; + pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhzgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 + >; + }; - pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 - >; - }; + pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhzgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts new file mode 100644 index 000000000000..94c395cc020e --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include "imx6qdl-kontron-samx6i-ads2.dtsi" + +/ { + model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier"; + compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi index 4d6a0c3e8455..e76963436079 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi @@ -5,31 +5,8 @@ #include "imx6q.dtsi" #include "imx6qdl-kontron-samx6i.dtsi" -#include <dt-bindings/gpio/gpio.h> / { - model = "Kontron SMARC sAMX6i Quad/Dual"; + model = "Kontron SMARC-sAMX6i Quad/Dual"; compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; }; - -/* Quad/Dual SoMs have 3 chip-select signals */ -&ecspi4 { - cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, - <&gpio3 29 GPIO_ACTIVE_LOW>, - <&gpio3 25 GPIO_ACTIVE_LOW>; -}; - -&pinctrl_ecspi4 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - - /* SPI4_IMX_CS2# - connected to internal flash */ - MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 - /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 - /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ - MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 - >; -}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi index 091903f53a56..c425d427663d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi @@ -15,7 +15,7 @@ / { backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 255>; num-interpolated-steps = <255>; default-brightness-level = <250>; @@ -23,7 +23,7 @@ beeper { compatible = "pwm-beeper"; - pwms = <&pwm2 0 500000>; + pwms = <&pwm2 0 500000 0>; }; lcd_display: display { @@ -378,14 +378,12 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts index 46a4ddedb423..86b813a57c1e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts @@ -110,13 +110,13 @@ }; &iomuxc { - pinctrl_lcd_reg: lcdreg { + pinctrl_lcd_reg: lcdreggrp { fsl,pins = < MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ >; }; - pinctrl_lcd_reset: lcdreset { + pinctrl_lcd_reset: lcdresetgrp { fsl,pins = < MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */ >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts b/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts new file mode 100644 index 000000000000..ae4f8eeb105d --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2024 Comvetia AG + +/dts-v1/; +#include "imx6q-phytec-pfla02.dtsi" + +/ { + model = "COMVETIA QSoIP LXR-2"; + compatible = "comvetia,imx6q-lxr", "phytec,imx6q-pfla02", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + spi { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi_gpio>; + sck-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fpga@0 { + compatible = "altr,fpga-passive-serial"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fpga>; + nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usdhc3 { + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_fpga: fpgagrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 + >; + }; + + pinctrl_spi_gpio: spigpiogrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0 + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi index 0d7be4567291..1e5eb837fd80 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi @@ -32,7 +32,7 @@ }; &iomuxc { - pinctrl_ecspi5_mba6x: ecspi5grp-mba6x { + pinctrl_ecspi5_mba6x: ecspi5-mba6xgrp { fsl,pins = < /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099 diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts index a7d5a68110fc..8c3a9ea8d5b3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts @@ -67,7 +67,7 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 10000000>; + pwms = <&pwm1 0 10000000 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight_novena>; power-supply = <®_lvds_lcd>; @@ -465,7 +465,6 @@ }; &pwm1 { - #pwm-cells = <2>; status = "okay"; }; @@ -531,7 +530,7 @@ }; &iomuxc { - pinctrl_audmux_novena: audmuxgrp-novena { + pinctrl_audmux_novena: audmux-novenagrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 @@ -540,7 +539,7 @@ >; }; - pinctrl_backlight_novena: backlightgrp-novena { + pinctrl_backlight_novena: backlight-novenagrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1 @@ -548,7 +547,7 @@ >; }; - pinctrl_ecspi3_novena: ecspi3grp-novena { + pinctrl_ecspi3_novena: ecspi3-novenagrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 @@ -556,7 +555,7 @@ >; }; - pinctrl_enet_novena: enetgrp-novena { + pinctrl_enet_novena: enet-novenagrp { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 @@ -579,7 +578,7 @@ >; }; - pinctrl_fpga_gpio: fpgagpiogrp-novena { + pinctrl_fpga_gpio: fpgagpio-novenagrp { fsl,pins = < /* FPGA power */ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 @@ -615,7 +614,7 @@ >; }; - pinctrl_fpga_eim: fpgaeimgrp-novena { + pinctrl_fpga_eim: fpgaeim-novenagrp { fsl,pins = < /* FPGA power */ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 @@ -651,7 +650,7 @@ >; }; - pinctrl_gpio_keys_novena: gpiokeysgrp-novena { + pinctrl_gpio_keys_novena: gpiokeys-novenagrp { fsl,pins = < /* User button */ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 @@ -662,35 +661,35 @@ >; }; - pinctrl_hdmi_novena: hdmigrp-novena { + pinctrl_hdmi_novena: hdmi-novenagrp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 >; }; - pinctrl_i2c1_novena: i2c1grp-novena { + pinctrl_i2c1_novena: i2c1-novenagrp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; - pinctrl_i2c2_novena: i2c2grp-novena { + pinctrl_i2c2_novena: i2c2-novenagrp { fsl,pins = < MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 >; }; - pinctrl_i2c3_novena: i2c3grp-novena { + pinctrl_i2c3_novena: i2c3-novenagrp { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 >; }; - pinctrl_kpp_novena: kppgrp-novena { + pinctrl_kpp_novena: kpp-novenagrp { fsl,pins = < /* Front panel button */ MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1 @@ -699,13 +698,13 @@ >; }; - pinctrl_leds_novena: ledsgrp-novena { + pinctrl_leds_novena: leds-novenagrp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1 >; }; - pinctrl_pcie_novena: pciegrp-novena { + pinctrl_pcie_novena: pcie-novenagrp { fsl,pins = < /* Reset */ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 @@ -716,13 +715,13 @@ >; }; - pinctrl_sata_novena: satagrp-novena { + pinctrl_sata_novena: sata-novenagrp { fsl,pins = < MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1 >; }; - pinctrl_senoko_novena: senokogrp-novena { + pinctrl_senoko_novena: senoko-novenagrp { fsl,pins = < /* Senoko IRQ line */ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048 @@ -731,7 +730,7 @@ >; }; - pinctrl_sound_novena: soundgrp-novena { + pinctrl_sound_novena: sound-novenagrp { fsl,pins = < /* Audio power regulator */ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1 @@ -741,41 +740,41 @@ >; }; - pinctrl_stmpe_novena: stmpegrp-novena { + pinctrl_stmpe_novena: stmpe-novenagrp { fsl,pins = < /* Touchscreen interrupt */ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1 >; }; - pinctrl_uart2_novena: uart2grp-novena { + pinctrl_uart2_novena: uart2-novenagrp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; - pinctrl_uart3_novena: uart3grp-novena { + pinctrl_uart3_novena: uart3-novenagrp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 >; }; - pinctrl_uart4_novena: uart4grp-novena { + pinctrl_uart4_novena: uart4-novenagrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 >; }; - pinctrl_usbotg_novena: usbotggrp-novena { + pinctrl_usbotg_novena: usbotg-novenagrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; - pinctrl_usdhc2_novena: usdhc2grp-novena { + pinctrl_usdhc2_novena: usdhc2-novenagrp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 @@ -790,7 +789,7 @@ >; }; - pinctrl_usdhc3_novena: usdhc3grp-novena { + pinctrl_usdhc3_novena: usdhc3-novenagrp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts index 46c6b96d8073..56b77cc0af2b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts @@ -124,7 +124,7 @@ backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm1 0 50000>; + pwms = <&pwm1 0 50000 0>; brightness-levels = < 0 /*1 2 3 4 5 6*/ 7 8 9 10 11 12 13 14 15 16 17 18 19 @@ -571,7 +571,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts index 3508a2cd928a..fb81bd8ba035 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts @@ -22,7 +22,7 @@ compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 16 64 255>; num-interpolated-steps = <16>; default-brightness-level = <1>; @@ -111,12 +111,21 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; @@ -292,7 +301,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -538,7 +546,7 @@ >; }; - pinctrl_wifi_npd: wifinpd { + pinctrl_wifi_npd: wifinpdgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts index 792b8903d345..0e02e448db10 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts @@ -133,7 +133,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_eth_chg>; - pinctrl_can1phy: can1phy { + pinctrl_can1phy: can1phygrp { fsl,pins = < /* CAN1_SR */ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 @@ -187,7 +187,7 @@ >; }; - pinctrl_wifi_npd: wifinpd { + pinctrl_wifi_npd: wifinpdgrp { fsl,pins = < /* WL_REG_ON */ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts index 9054c1d58b9d..84fbcd129179 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts @@ -25,51 +25,49 @@ }; &iomuxc { - imx6q-sbc6x { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts index 7c298d9aa21e..5353a0c24420 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts @@ -90,11 +90,16 @@ ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts index ac3050a835e5..393bfec58e2f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts @@ -51,7 +51,6 @@ &backlight { pwms = <&pwm2 0 500000 0>; - /delete-property/ turn-on-delay-ms; }; &can1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts index a773f252816c..1ab175ffa238 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts @@ -51,7 +51,6 @@ &backlight { pwms = <&pwm2 0 500000 0>; - /delete-property/ turn-on-delay-ms; }; &can1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts index ad59b23ef27a..aae81feee00d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts @@ -296,7 +296,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 @@ -307,7 +307,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts index 2290c1237634..0225a621ec7a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts @@ -18,7 +18,7 @@ backlight_lvds: backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000>; + pwms = <&pwm2 0 50000 0>; brightness-levels = <0 4 8 16 32 64 128 248>; default-brightness-level = <7>; status = "okay"; @@ -203,7 +203,6 @@ }; &pwm2 { - #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi new file mode 100644 index 000000000000..83fa04fc9f18 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +&i2c2 { + /delete-node/ stmpe811@41; + + ad7879_ts: touchscreen@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + + tla2024_adc: adc@49 { + compatible = "ti,tla2024"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Apalis AN1_ADC0 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Apalis AN1_ADC1 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Apalis AN1_ADC2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Apalis AN1_TSWIP_ADC3 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index ea40623d12e5..b13000a62a7b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -10,7 +10,6 @@ / { model = "Toradex Apalis iMX6Q/D Module"; - compatible = "toradex,apalis_imx6q", "fsl,imx6q"; aliases { mmc0 = &usdhc3; /* eMMC */ @@ -108,6 +107,11 @@ }; }; + poweroff { + compatible = "regulator-poweroff"; + cpu-supply = <&vgen2_reg>; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-always-on; @@ -191,17 +195,26 @@ "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - model = "imx6q-apalis-sgtl5000"; + model = "apalis-imx6"; mux-ext-port = <4>; mux-int-port = <1>; ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; @@ -227,10 +240,6 @@ status = "disabled"; }; -&clks { - fsl,pmic-stby-poweroff; -}; - /* Apalis SPI1 */ &ecspi1 { cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; @@ -518,7 +527,6 @@ pmic: pmic@8 { compatible = "fsl,pfuze100"; - fsl,pmic-stby-poweroff; reg = <0x08>; regulators { @@ -655,7 +663,6 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; - status = "disabled"; }; stmpe_adc: stmpe_adc { @@ -682,7 +689,7 @@ adv_7280: adv7280@21 { compatible = "adi,adv7280"; - adv,force-bt656-4; + adi,force-bt656-4; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu1_csi0>; reg = <0x21>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi index 338d292553ad..9e97ef5e43f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi @@ -13,7 +13,7 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 191000>; + pwms = <&pwm3 0 191000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <0>; power-supply = <®_5v>; @@ -121,11 +121,16 @@ mux-ext-port = <3>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; @@ -212,7 +217,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi index baa197c90060..acb404c6828b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi @@ -179,230 +179,228 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>; - imx6qdl-aristainetos { - pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>; - }; - - pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>; - }; - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 - >; - }; + pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbusgrp { + fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>; + }; - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 - MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x100b1 - >; - }; - - pinctrl_ecspi4: ecspi4grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b1 - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 - MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - >; - }; + pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbusgrp { + fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0 - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 - MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 - MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - >; - }; - - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + >; + }; - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x10 - >; - }; + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x100b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b1 + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_ipu_disp: ipudisp1grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x20000 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 - MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x10 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu_disp: ipudisp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x20000 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 >; - }; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi index db1bc511e71f..7cc7ae195988 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi @@ -46,7 +46,7 @@ / { backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; @@ -346,7 +346,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -414,7 +413,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio>; - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 @@ -507,7 +506,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 @@ -600,11 +599,11 @@ >; }; - pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus { + pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbusgrp { fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>; }; - pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus { + pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbusgrp { fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi new file mode 100644 index 000000000000..d11bf911b728 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +&i2c2 { + /delete-node/ stmpe811@41; + + ad7879_ts: touchscreen@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio6>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + + tla2024_adc: adc@49 { + compatible = "ti,tla2024"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Colibri AIN0 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Colibri AIN1 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Colibri AIN2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Colibri AIN3 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index d3a7a6eeb8e0..3525cbcda57f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -10,7 +10,6 @@ / { model = "Toradex Colibri iMX6DL/S Module"; - compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; aliases { mmc0 = &usdhc3; /* eMMC */ @@ -136,18 +135,27 @@ "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias"; - model = "imx6dl-colibri-sgtl5000"; + model = "colibri-imx6"; mux-int-port = <1>; mux-ext-port = <5>; ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; @@ -579,7 +587,6 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; - status = "disabled"; }; stmpe_adc: stmpe_adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi index 1e530d892b76..41d073f5bfe7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi @@ -64,7 +64,7 @@ active-low; label = "imx6:red:front"; max-brightness = <248>; - pwms = <&pwm1 0 50000>; + pwms = <&pwm1 0 50000 0>; }; }; @@ -100,12 +100,17 @@ vin-supply = <&v_5v0>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; gpio-keys { @@ -148,92 +153,89 @@ }; &iomuxc { - cubox_i { - pinctrl_cubox_i_hdmi: cubox-i-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_cubox_i_hdmi: cubox-i-hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_cubox_i_i2c2: cubox-i-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_cubox_i_i2c2: cubox-i-i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_cubox_i_i2c3: cubox-i-i2c3 { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_cubox_i_i2c3: cubox-i-i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_cubox_i_ir: cubox-i-ir { - fsl,pins = < - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 - >; - }; + pinctrl_cubox_i_ir: cubox-i-irgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 + >; + }; - pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led { - fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>; - }; + pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-ledgrp { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>; + }; - pinctrl_cubox_i_spdif: cubox-i-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; + pinctrl_cubox_i_spdif: cubox-i-spdifgrp { + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; + }; - pinctrl_cubox_i_usbh1: cubox-i-usbh1 { - fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; - }; + pinctrl_cubox_i_usbh1: cubox-i-usbh1grp { + fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; + }; - pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; - }; + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbusgrp { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; + }; - pinctrl_cubox_i_usbotg: cubox-i-usbotg { - /* - * The Cubox-i pulls ID low, but as it's pointless - * leaving it as a pull-up, even if it is just 10uA. - */ - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - >; - }; + pinctrl_cubox_i_usbotg: cubox-i-usbotggrp { + /* + * The Cubox-i pulls ID low, but as it's pointless + * leaving it as a pull-up, even if it is just 10uA. + */ + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; + }; - pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; - }; + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbusgrp { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; + }; - pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 - >; - }; + pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-auxgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 + >; + }; - pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; + pinctrl_cubox_i_usdhc2: cubox-i-usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; - pinctrl_gpio_key: gpio-key { - fsl,pins = < - MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059 - >; - }; + pinctrl_gpio_key: gpio-keygrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059 + >; }; }; &pwm1 { - #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi index 0a6c3a092b34..f560a6b7779a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi @@ -47,103 +47,101 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6qdl-dfi-fs700-m60 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */ - MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */ - MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */ - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */ - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */ + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */ + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi index 6248b126b557..d7c2b30aecfd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi @@ -56,7 +56,6 @@ }; gpio-keys { - #size-cells = <0>; compatible = "gpio-keys"; button-0 { @@ -144,6 +143,7 @@ panel { backlight = <&display_bl>; compatible = "edt,etm0700g0edh6"; + power-supply = <®_panel_3v3>; port { lcd_panel_in: endpoint { @@ -152,6 +152,25 @@ }; }; + /* Filtered supply voltage */ + reg_pdk2_24v: regulator-pdk2-24v { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <24000000>; + regulator-min-microvolt = <24000000>; + regulator-name = "24V_PDK2"; + }; + + /* 560-200 U1 */ + reg_panel_3v3: regulator-panel-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "3V3_PANEL"; + vin-supply = <®_pdk2_24v>; + }; + sound { audio-codec = <&sgtl5000>; audio-routing = diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi index eaa87b333164..af0d95396cd5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi @@ -256,7 +256,6 @@ regulator-max-microvolt = <1527272>; regulator-min-microvolt = <787500>; regulator-ramp-delay = <7000>; - regulator-suspend-mem-microvolt = <1040000>; }; sw2_reg: sw2 { @@ -275,7 +274,6 @@ regulator-max-microvolt = <1527272>; regulator-min-microvolt = <787500>; regulator-ramp-delay = <7000>; - regulator-suspend-mem-microvolt = <980000>; }; sw4_reg: sw4 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi index f7e517555697..99ebd4dd63e8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi @@ -253,7 +253,7 @@ >; }; - pinctrl_ecspi1_gpio: ecspi1grpgpiogrp { + pinctrl_ecspi1_gpio: ecspi1gpiogrp { fsl,pins = < MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 @@ -349,7 +349,7 @@ >; }; - pinctrl_usdhc1_gpio: usdhc1grpgpiogrp { + pinctrl_usdhc1_gpio: usdhc1gpiogrp { fsl,pins = < MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 >; @@ -366,7 +366,7 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpiogrp { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi index 42b2ba23aefc..97763db3959f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi @@ -66,7 +66,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lvds_bl>; enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; - pwms = <&pwm1 0 50000>; + pwms = <&pwm1 0 50000 0>; brightness-levels = < 0 4 8 16 32 64 80 96 112 128 144 160 176 250 @@ -78,7 +78,7 @@ pwm_fan: pwm-fan { compatible = "pwm-fan"; #cooling-cells = <2>; - pwms = <&pwm4 0 50000>; + pwms = <&pwm4 0 50000 0>; cooling-levels = <0 64 127 191 255>; status = "disabled"; }; @@ -145,7 +145,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgb_bl>; enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; brightness-levels = < 250 176 160 144 128 112 96 80 64 48 32 16 8 1 @@ -330,7 +330,6 @@ }; &iomuxc { - pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 @@ -382,79 +381,79 @@ >; }; - pinctrl_emcon_gpio1: emcongpio1 { + pinctrl_emcon_gpio1: emcongpio1grp { fsl,pins = < MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x0b0b1 >; }; - pinctrl_emcon_gpio2: emcongpio2 { + pinctrl_emcon_gpio2: emcongpio2grp { fsl,pins = < MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0b0b1 >; }; - pinctrl_emcon_gpio3: emcongpio3 { + pinctrl_emcon_gpio3: emcongpio3grp { fsl,pins = < MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0b0b1 >; }; - pinctrl_emcon_gpio4: emcongpio4 { + pinctrl_emcon_gpio4: emcongpio4grp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0b0b1 >; }; - pinctrl_emcon_gpio5: emcongpio5 { + pinctrl_emcon_gpio5: emcongpio5grp { fsl,pins = < MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x0b0b1 >; }; - pinctrl_emcon_gpio6: emcongpio6 { + pinctrl_emcon_gpio6: emcongpio6grp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0b0b1 >; }; - pinctrl_emcon_gpio7: emcongpio7 { + pinctrl_emcon_gpio7: emcongpio7grp { fsl,pins = < MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0b0b1 >; }; - pinctrl_emcon_gpio8: emcongpio8 { + pinctrl_emcon_gpio8: emcongpio8grp { fsl,pins = < MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0b0b1 >; }; - pinctrl_emcon_irq_a: emconirqa { + pinctrl_emcon_irq_a: emconirqagrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x0b0b1 >; }; - pinctrl_emcon_irq_b: emconirqb { + pinctrl_emcon_irq_b: emconirqbgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x0b0b1 >; }; - pinctrl_emcon_irq_c: emconirqc { + pinctrl_emcon_irq_c: emconirqcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0b0b1 >; }; - pinctrl_emcon_irq_pwr: emconirqpwr { + pinctrl_emcon_irq_pwr: emconirqpwrgrp { fsl,pins = < MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0b0b1 >; }; - pinctrl_emcon_wake: emconwake { + pinctrl_emcon_wake: emconwakegrp { fsl,pins = < MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 >; @@ -503,13 +502,13 @@ >; }; - pinctrl_irq_touch1: irqtouch1 { + pinctrl_irq_touch1: irqtouch1grp { fsl,pins = < MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x0b0b1 >; }; - pinctrl_irq_touch2: irqtouch2 { + pinctrl_irq_touch2: irqtouch2grp { fsl,pins = < MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x0b0b1 >; @@ -552,7 +551,7 @@ >; }; - pinctrl_pwm_fan: pwmfan { + pinctrl_pwm_fan: pwmfangrp { fsl,pins = < MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x0b0b1 >; @@ -565,7 +564,7 @@ >; }; - pinctrl_rgb_bl_en: rgbenable { + pinctrl_rgb_bl_en: rgbenablegrp { fsl,pins = < MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x0b0b1 >; @@ -617,13 +616,13 @@ >; }; - pinctrl_spdif_in: spdifin { + pinctrl_spdif_in: spdifingrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 >; }; - pinctrl_spdif_out: spdifout { + pinctrl_spdif_out: spdifoutgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 >; @@ -736,17 +735,14 @@ }; &pwm1 { - #pwm-cells = <2>; status = "okay"; }; &pwm3 { - #pwm-cells = <2>; status = "okay"; }; &pwm4 { - #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi index 535679c27d6f..b57f4073f881 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi @@ -25,7 +25,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; }; @@ -485,7 +485,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -520,7 +520,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -762,7 +761,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 @@ -775,7 +774,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi index 3e1c572af582..090c0057d117 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi @@ -25,7 +25,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; }; @@ -482,7 +482,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -517,7 +517,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -751,7 +750,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -764,7 +763,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi index 0ffa0357a6fa..94f1d1ae59aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi @@ -26,7 +26,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; }; @@ -529,7 +529,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -570,7 +570,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default", "state_dio"; pinctrl-0 = <&pinctrl_pwm4_backlight>; pinctrl-1 = <&pinctrl_pwm4_dio>; @@ -771,14 +770,14 @@ >; }; - pinctrl_pwm4_backlight: pwm4grpbacklight { + pinctrl_pwm4_backlight: pwm4backlightgrp { fsl,pins = < /* LVDS_PWM J6.5 */ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; - pinctrl_pwm4_dio: pwm4grpdio { + pinctrl_pwm4_dio: pwm4diogrp { fsl,pins = < /* DIO3 J16.4 */ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 @@ -834,7 +833,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -847,7 +846,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi index 7f16c602cc07..c6e231de674a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi @@ -704,7 +704,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -717,7 +717,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index 46cf4080fec3..d0f648938cae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -66,7 +66,7 @@ backlight-display { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 @@ -584,7 +584,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -619,7 +619,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -897,7 +896,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -910,7 +909,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index a74cde050158..71911df881cc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -56,7 +56,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 @@ -486,7 +486,7 @@ display-timings { native-mode = <&timing0>; - timing0: g101evn010 { + timing0: timing-g101evn010 { clock-frequency = <68930000>; hactive = <1280>; vactive = <800>; @@ -502,7 +502,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -681,7 +680,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */ @@ -711,7 +710,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 @@ -724,7 +723,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 @@ -753,7 +752,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -769,7 +768,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi index 1e723807ab4c..716c324a7458 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi @@ -70,7 +70,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; }; @@ -551,7 +551,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -586,7 +586,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -818,7 +817,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -834,7 +833,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi index 424dc7fcd533..453dee4d9227 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi @@ -629,7 +629,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 @@ -642,7 +642,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi index 49ea25c71967..add700bc11cc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi @@ -569,7 +569,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -582,7 +582,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi index a955c77cd499..54d4bced2395 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi @@ -140,12 +140,17 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; @@ -218,100 +223,98 @@ }; &iomuxc { - hummingboard { - pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 - >; - }; + pinctrl_hummingboard_flexcan1: hummingboard-flexcan1grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + >; + }; - pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 { - fsl,pins = < - MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 - >; - }; + pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5grp { + fsl,pins = < + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + >; + }; - pinctrl_hummingboard_hdmi: hummingboard-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_hummingboard_hdmi: hummingboard-hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_hummingboard_i2c1: hummingboard-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_hummingboard_i2c1: hummingboard-i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_hummingboard_i2c2: hummingboard-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_hummingboard_i2c2: hummingboard-i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset { - fsl,pins = < - MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 - >; - }; + pinctrl_hummingboard_pcie_reset: hummingboard-pcie-resetgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 + >; + }; - pinctrl_hummingboard_pwm1: pwm1grp { - fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; - }; + pinctrl_hummingboard_pwm1: pwm1grp { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; + }; - pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 - MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 - MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 - MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; + pinctrl_hummingboard_spdif: hummingboard-spdifgrp { + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; + }; - pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; + pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbusgrp { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; - pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { - /* - * We want it pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>; - }; + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-idgrp { + /* + * We want it pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>; + }; - pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbusgrp { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; - pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - >; - }; + pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-auxgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + >; + }; - pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; - pinctrl_hummingboard_vmmc: hummingboard-vmmc { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 - >; - }; + pinctrl_hummingboard_usdhc2: hummingboard-usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + pinctrl_hummingboard_vmmc: hummingboard-vmmcgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi index f400405381a7..c3efb001c515 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi @@ -42,22 +42,20 @@ */ &iomuxc { - hummingboard2 { - pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 - >; - }; + pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi index e6017f9bf640..3069e1738ba2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi @@ -261,258 +261,256 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - hummingboard2 { - pinctrl_hog: hoggrp { + pinctrl_hog: hoggrp { fsl,pins = < - /* - * 36 pin headers GPIO description. The pins - * numbering as following - - * - * 3.2v 5v 74 75 - * 73 72 71 70 - * 69 68 67 66 - * - * 77 78 79 76 - * 65 64 61 60 - * 53 52 51 50 - * 49 48 166 132 - * 95 94 90 91 - * GND 54 24 204 - * - * The GPIO numbers can be extracted using - * signal name from below. - * Example - - * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is - * GPIO(3,10) which is (3-1)*32+10 = gpio 74 - * - * i.e. The mapping of GPIO(X,Y) to Linux gpio - * number is : gpio number = (X-1) * 32 + Y - */ - /* DI1_PIN15 */ - MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1 - /* DI1_PIN02 */ - MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1 - /* DISP1_DATA00 */ - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1 - /* DISP1_DATA01 */ - MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1 - /* DISP1_DATA02 */ - MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1 - /* DISP1_DATA03 */ - MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1 - /* DISP1_DATA04 */ - MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1 - /* DISP1_DATA05 */ - MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1 - /* DISP1_DATA06 */ - MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1 - /* DISP1_DATA07 */ - MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1 - /* DI1_D0_CS */ - MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1 - /* DI1_D1_CS */ - MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1 - /* DI1_PIN01 */ - MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1 - /* DI1_PIN03 */ - MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1 - /* DISP1_DATA08 */ - MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1 - /* DISP1_DATA09 */ - MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1 - /* DISP1_DATA10 */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1 - /* DISP1_DATA11 */ - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1 - /* DISP1_DATA12 */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1 - /* DISP1_DATA13 */ - MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1 - /* DISP1_DATA14 */ - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1 - /* DISP1_DATA15 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1 - /* DISP1_DATA16 */ - MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1 - /* DISP1_DATA17 */ - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1 - /* DISP1_DATA18 */ - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1 - /* DISP1_DATA19 */ - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1 - /* DISP1_DATA20 */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1 - /* DISP1_DATA21 */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1 - /* DISP1_DATA22 */ - MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1 - /* DISP1_DATA23 */ - MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1 - /* DI1_DISP_CLK */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1 - /* SPDIF_IN */ - MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1 - /* SPDIF_OUT */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1 - - /* MikroBUS GPIO pin number 10 */ - MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 - >; - }; + /* + * 36 pin headers GPIO description. The pins + * numbering as following - + * + * 3.2v 5v 74 75 + * 73 72 71 70 + * 69 68 67 66 + * + * 77 78 79 76 + * 65 64 61 60 + * 53 52 51 50 + * 49 48 166 132 + * 95 94 90 91 + * GND 54 24 204 + * + * The GPIO numbers can be extracted using + * signal name from below. + * Example - + * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is + * GPIO(3,10) which is (3-1)*32+10 = gpio 74 + * + * i.e. The mapping of GPIO(X,Y) to Linux gpio + * number is : gpio number = (X-1) * 32 + Y + */ + /* DI1_PIN15 */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1 + /* DI1_PIN02 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1 + /* DISP1_DATA00 */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1 + /* DISP1_DATA01 */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1 + /* DISP1_DATA02 */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1 + /* DISP1_DATA03 */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1 + /* DISP1_DATA04 */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1 + /* DISP1_DATA05 */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1 + /* DISP1_DATA06 */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1 + /* DISP1_DATA07 */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1 + /* DI1_D0_CS */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1 + /* DI1_D1_CS */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1 + /* DI1_PIN01 */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1 + /* DI1_PIN03 */ + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1 + /* DISP1_DATA08 */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1 + /* DISP1_DATA09 */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1 + /* DISP1_DATA10 */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1 + /* DISP1_DATA11 */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1 + /* DISP1_DATA12 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1 + /* DISP1_DATA13 */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1 + /* DISP1_DATA14 */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1 + /* DISP1_DATA15 */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1 + /* DISP1_DATA16 */ + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1 + /* DISP1_DATA17 */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1 + /* DISP1_DATA18 */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1 + /* DISP1_DATA19 */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1 + /* DISP1_DATA20 */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1 + /* DISP1_DATA21 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1 + /* DISP1_DATA22 */ + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1 + /* DISP1_DATA23 */ + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1 + /* DI1_DISP_CLK */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1 + /* SPDIF_IN */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1 + /* SPDIF_OUT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1 + + /* MikroBUS GPIO pin number 10 */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 + >; + }; - pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */ - >; - }; + pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */ + >; + }; - pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 - >; - }; + pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 + >; + }; - pinctrl_hummingboard2_hdmi: hummingboard2-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_hummingboard2_hdmi: hummingboard2-hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_hummingboard2_i2c1: hummingboard2-i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_hummingboard2_i2c2: hummingboard2-i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_hummingboard2_i2c3: hummingboard2-i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_hummingboard2_mipi: hummingboard2_mipi { - fsl,pins = < - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1 - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1 - MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 - >; - }; + pinctrl_hummingboard2_mipi: hummingboard2_mipigrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; - pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset { - fsl,pins = < - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1 - >; - }; + pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-resetgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1 + >; + }; - pinctrl_hummingboard2_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_hummingboard2_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_hummingboard2_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_hummingboard2_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 - MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 - MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 - MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; + pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbusgrp { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; - pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus { - fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>; - }; + pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbusgrp { + fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>; + }; - pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus { - fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>; - }; + pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbusgrp { + fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>; + }; - pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id { - /* - * We want it pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; + pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-idgrp { + /* + * We want it pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; - pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; + pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbusgrp { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; - pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 - >; - }; + pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-auxgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 + >; + }; - pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; + pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; - pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 - >; - }; + pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 + >; + }; - pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 - >; - }; + pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 + >; + }; - pinctrl_hummingboard2_vmmc: hummingboard2-vmmc { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 - >; - }; + pinctrl_hummingboard2_vmmc: hummingboard2-vmmcgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; - pinctrl_hummingboard2_uart3: hummingboard2-uart3 { - fsl,pins = < - MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000 - >; - }; + pinctrl_hummingboard2_uart3: hummingboard2-uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi index d339957cc097..dff184a119f3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi @@ -397,7 +397,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B1 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B1 @@ -408,7 +408,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 @@ -434,7 +434,7 @@ >; }; - pinctrl_usdhc4_100mhz: usdhc4grp_100mhz { + pinctrl_usdhc4_100mhz: usdhc4-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170B1 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100B1 @@ -449,7 +449,7 @@ >; }; - pinctrl_usdhc4_200mhz: usdhc4grp_200mhz { + pinctrl_usdhc4_200mhz: usdhc4-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170F9 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100F9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi index efe11524b885..9975b6ee433d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi @@ -20,7 +20,7 @@ backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm3 0 100000>; + pwms = <&pwm3 0 100000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; }; @@ -245,7 +245,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi new file mode 100644 index 000000000000..b4a79245b7b6 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval + * 2.0 carrier (ADS2). + * + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + sound { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out Jack", + "Microphone", "Microphone Jack", + "Line", "Line In Jack"; + simple-audio-card,routing = + "Line Out Jack", "LINEOUTR", + "Line Out Jack", "LINEOUTL", + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN2L", "Microphone Jack", + "IN2R", "Microphone Jack"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + }; + + reg_codec_mic: regulator-codec-mic { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MIC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_codec_1p8v: regulator-codec-1p8v { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S0_CODEC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&ecspi4 { + flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <100000000>; + m25p,fast-read; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "mclk"; + AVDD-supply = <®_codec_1p8v>; + CPVDD-supply = <®_codec_1p8v>; + DBVDD-supply = <®_codec_1p8v>; + DCVDD-supply = <®_codec_1p8v>; + MICVDD-supply = <®_codec_mic>; + }; +}; + +&i2c3 { + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&pcie { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi index 85aeebc9485d..c771f87b10df 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi @@ -61,6 +61,18 @@ vin-supply = <®_smarc_suppy>; }; + reg_sdio: regulator-sdio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sdio>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + }; + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -137,7 +149,7 @@ status = "disabled"; }; - i2c_intern: i2c-gpio-intern { + i2c_intern: i2c-0 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_intern>; @@ -148,7 +160,7 @@ #size-cells = <0>; }; - i2c_lcd: i2c-gpio-lcd { + i2c_lcd: i2c-1 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_lcd>; @@ -160,7 +172,7 @@ status = "disabled"; }; - i2c_cam: i2c-gpio-cam { + i2c_cam: i2c-2 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_cam>; @@ -178,7 +190,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - audmux_ssi1 { + mux-ssi1 { fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) | @@ -190,7 +202,7 @@ >; }; - audmux_adu3 { + mux-aud3 { fsl,audmux-port = <MX51_AUDMUX_PORT3>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -198,7 +210,7 @@ >; }; - audmux_ssi2 { + mux-ssi2 { fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | @@ -210,7 +222,7 @@ >; }; - audmux_adu4 { + mux-aud4 { fsl,audmux-port = <MX51_AUDMUX_PORT4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -244,7 +256,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, - <&gpio3 29 GPIO_ACTIVE_LOW>; + <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ @@ -259,7 +272,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-connection-type = "rgmii-id"; phy-handle = <ðphy>; mdio { @@ -269,7 +282,7 @@ ethphy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; }; }; @@ -356,10 +369,6 @@ regulator-always-on; }; - /* - * Per schematics, of all VGEN's, only VGEN5 has some - * usage ... but even that - over DNI resistor - */ vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; @@ -380,8 +389,7 @@ regulator-max-microvolt = <3300000>; }; - reg_2p5v_s0: vgen5 { - regulator-name = "V_2V5_S0"; + vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; @@ -464,6 +472,8 @@ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 >; }; @@ -516,7 +526,7 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 /* RST_GBE0_PHY# */ >; }; @@ -642,6 +652,12 @@ >; }; + pinctrl_reg_sdio: reg-sdiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 @@ -694,7 +710,6 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ >; }; @@ -713,7 +728,7 @@ >; }; - pinctrl_wdog1: wdog1rp { + pinctrl_wdog1: wdog1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 >; @@ -728,8 +743,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; }; /* LCD_BKLT_PWM */ @@ -797,12 +811,12 @@ pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sdio>; no-1-8-v; }; /* SDMMC */ &usdhc4 { - /* Internal eMMC, optional on some boards */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; @@ -811,11 +825,13 @@ non-removable; vmmc-supply = <®_3p3v_s0>; vqmmc-supply = <®_1p8v_s0>; + status = "okay"; }; &wdog1 { /* CPLD is feeded by watchdog (hardwired) */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi index 4d2abcd44eff..ee2c6bec92e8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi @@ -106,11 +106,25 @@ vin-supply = <®_mba6_3p3v>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x14000000>; + alloc-ranges = <0x10000000 0x20000000>; + linux,cma-default; + }; + }; + sound { compatible = "fsl,imx-audio-tlv320aic32x4"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&ssi1>; audio-codec = <&tlv320aic32x4>; audio-asrc = <&asrc>; @@ -298,6 +312,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; + vdd-supply = <®_mba6_3p3v>; ethernet@1 { compatible = "usb424,9e00"; @@ -441,8 +456,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099 - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi index 238f3af42822..aca320ee8f47 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi @@ -13,7 +13,7 @@ &i2c1 { lm75: temperature-sensor@49 { - compatible = "national,lm75"; + compatible = "national,lm75a"; reg = <0x49>; vs-supply = <®_mba6_3p3v>; }; @@ -22,12 +22,16 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; - #address-cells = <1>; - #size-cells = <1>; vcc-supply = <®_mba6_3p3v>; - mba_mac_address: mac-address@20 { - reg = <0x20 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi index a587bc88f76f..c7bbd6195fef 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi @@ -23,7 +23,7 @@ &i2c3 { lm75: temperature-sensor@49 { - compatible = "national,lm75"; + compatible = "national,lm75a"; reg = <0x49>; vs-supply = <®_mba6_3p3v>; }; @@ -32,12 +32,16 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; - #address-cells = <1>; - #size-cells = <1>; vcc-supply = <®_mba6_3p3v>; - mba_mac_address: mac-address@20 { - reg = <0x20 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; }; @@ -46,12 +50,3 @@ reg = <0x68>; }; }; - -&iomuxc { - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 - >; - }; -}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi index f2542d725ce7..8ee65f9858c0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi @@ -108,7 +108,7 @@ backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -117,7 +117,7 @@ backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -276,205 +276,203 @@ pinctrl-0 = <&pinctrl_j10>; pinctrl-1 = <&pinctrl_j28>; - imx6dl-nit6xlite { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - /* Phy reset */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; - pinctrl_gpio_keys: gpio-keysgrp { - fsl,pins = < - /* Home Button: J14 pin 5 */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 - /* Back Button: J14 pin 7 */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 - /* Touch IRQ: J7 pin 4 */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - /* tcs2004 IRQ */ - MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 - /* tsc2004 reset */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; - pinctrl_j10: j10grp { - fsl,pins = < - /* Broadcom WiFi module pins */ - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 - MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 - MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 - >; - }; + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; - pinctrl_j28: j28grp { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - >; - }; + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; - pinctrl_leds: ledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 - MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 - >; - }; + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_wlan_vmmc: wlan-vmmcgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 - >; - }; + pinctrl_wlan_vmmc: wlan-vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; - pinctrl_rtc: rtcgrp { - fsl,pins = < - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 - >; - }; + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; - pinctrl_sgtl5000: sgtl5000grp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 - >; - }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; }; }; @@ -499,7 +497,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -512,7 +509,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi index 32a110a35b02..43d474bbf55d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi @@ -183,7 +183,7 @@ backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -192,7 +192,7 @@ backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -201,7 +201,7 @@ backlight_lvds1: backlight-lvds1 { compatible = "pwm-backlight"; - pwms = <&pwm2 0 5000000>; + pwms = <&pwm2 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -411,287 +411,285 @@ }; &iomuxc { - imx6q-nitrogen6-max { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; - pinctrl_can_xcvr: can-xcvrgrp { - fsl,pins = < - /* Flexcan XCVR enable */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - >; - }; + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - /* Phy reset */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; - pinctrl_gpio_keys: gpio-keysgrp { - fsl,pins = < - /* Power Button */ - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 - /* Menu Button */ - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - /* Home Button */ - MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 - /* Back Button */ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - /* Volume Up Button */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 - /* Volume Down Button */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2mux: i2c2muxgrp { - fsl,pins = < - /* ov5642 camera i2c enable */ - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 - /* ov5640_mipi camera i2c enable */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 - >; - }; + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; - pinctrl_i2c3mux: i2c3muxgrp { - fsl,pins = < - /* PCIe I2C enable */ - MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 - >; - }; + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; - pinctrl_j15: j15grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 - >; - }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - /* PCIe reset */ - MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_rv4162: rv4162grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - >; - }; + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; - pinctrl_sgtl5000: sgtl5000grp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 - >; - }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 - /* RS485 RX Enable: pull up */ - MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 - /* RS485 DEN: pull down */ - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 - /* RS485/!RS232 Select: pull down (rs232) */ - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 - /* ON: pull down */ - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; - pinctrl_wlan_vmmc: wlan-vmmcgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 - MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 - >; - }; + pinctrl_wlan_vmmc: wlan-vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; }; }; @@ -735,14 +733,12 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; @@ -755,7 +751,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi index 414196b75991..8e64314fa8b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi @@ -17,7 +17,7 @@ backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -26,7 +26,7 @@ backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -641,7 +641,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -654,7 +653,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi index f278b14911ce..8a0bfc387a59 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi @@ -134,7 +134,7 @@ backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -143,7 +143,7 @@ backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -343,231 +343,229 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6q-nitrogen6x { - pinctrl_hog: hoggrp { - fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; - pinctrl_can_xcvr: can-xcvrgrp { - fsl,pins = < - /* Flexcan XCVR enable */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - >; - }; + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - /* Phy reset */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x000b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x000b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; - pinctrl_gpio_keys: gpio-keysgrp { - fsl,pins = < - /* Power Button */ - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 - /* Menu Button */ - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - /* Home Button */ - MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 - /* Back Button */ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - /* Volume Up Button */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 - /* Volume Down Button */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_j15: j15grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 - >; - }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ + >; + }; - pinctrl_wlan_vmmc: wlan-vmmcgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 - MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 - >; - }; + pinctrl_wlan_vmmc: wlan-vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; }; }; @@ -596,7 +594,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -609,7 +606,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi index 84f884d6e55b..08b2dd06580a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi @@ -54,7 +54,7 @@ }; &iomuxc { - pinctrl_uart3_bt: uart3grp-bt { + pinctrl_uart3_bt: uart3-btgrp { fsl,pins = < MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -66,7 +66,7 @@ >; }; - pinctrl_usdhc3_wl: usdhc3grp-wl { + pinctrl_usdhc3_wl: usdhc3-wlgrp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi index 1ca4d219609f..0b4c09b09c03 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi @@ -15,7 +15,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_backlight>; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; status = "okay"; }; @@ -224,7 +224,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi index c0c47adc5866..aa9a442852f4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi @@ -227,170 +227,168 @@ }; &iomuxc { - imx6q-phytec-pfla02 { - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* CS0 */ - >; - }; + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* CS0 */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 /* Reset GPIO */ - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 /* Reset GPIO */ + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_leds: ledsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ - MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ - >; - }; + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; - }; + pinctrl_pcie: pciegrp { + fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000>; /* PMIC interrupt */ - }; + pinctrl_pmic: pmicgrp { + fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000>; /* PMIC interrupt */ + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbh1_vbus: usbh1vbusgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; + pinctrl_usbh1_vbus: usbh1vbusgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; - pinctrl_usdhc3_cdwp: usdhc3cdwp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - >; - }; + pinctrl_usdhc3_cdwp: usdhc3cdwpgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 - MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 - MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 - MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi index eba698d04243..64ded5e5559c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi @@ -154,159 +154,157 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6qdl-rex { - pinctrl_hog: hoggrp { - fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - /* CS */ - MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x000b1 - >; - }; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x000b1 + >; + }; - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 - /* CS */ - MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 - >; - }; + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_led: ledgrp { - fsl,pins = < - /* user led */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - >; - }; + pinctrl_led: ledgrp { + fsl,pins = < + /* user led */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; - pinctrl_pca9535: pca9535grp { - fsl,pins = < - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059 - >; - }; + pinctrl_pca9535: pca9535grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - /* power enable, high active */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x10b0 - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* power enable, high active */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x10b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - /* CD */ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - /* WP */ - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1f0b0 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + /* CD */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* WP */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1f0b0 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - /* CD */ - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 - /* WP */ - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1f0b0 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + /* CD */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + /* WP */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1f0b0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index 68e97180d33e..a381cb224c1e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -143,17 +143,22 @@ "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { - compatible = "fsl,imx-audio-spdif", - "fsl,imx-sabreauto-spdif"; + compatible = "fsl,imx-sabreauto-spdif", + "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; status = "okay"; @@ -467,312 +472,310 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6qdl-sabreauto { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 - MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 - MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 + MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + >; + }; - pinctrl_ecspi1_cs: ecspi1cs { - fsl,pins = < - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 - >; - }; + pinctrl_ecspi1_cs: ecspi1csgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 + >; + }; - pinctrl_egalax_int: egalax-intgrp { - fsl,pins = < - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 - >; - }; + pinctrl_egalax_int: egalax-intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; - pinctrl_esai: esaigrp { - fsl,pins = < - MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 - MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030 - MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030 - MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030 - MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030 - MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030 - MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030 - MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030 - MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030 - MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030 - >; - }; + pinctrl_esai: esaigrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 + MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030 + MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030 + MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030 + MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030 + MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030 + MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030 + MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030 + MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030 + MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030 + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x17059 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x17059 - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x17059 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x17059 + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x17059 - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x17059 - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x17059 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x17059 + >; + }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; - pinctrl_hdmi_cec: hdmicecgrp { - fsl,pins = < - MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3mux: i2c3muxgrp { - fsl,pins = < - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1 - >; - }; + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1 + >; + }; - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 - >; - }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; - pinctrl_max7310: max7310grp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 - >; - }; + pinctrl_max7310: max7310grp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; - pinctrl_mma8451_int: mma8451intgrp { - fsl,pins = < - MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 - >; - }; + pinctrl_mma8451_int: mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 + >; + }; - pinctrl_pwm3: pwm1grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_gpt_input_capture0: gptinputcapture0grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x1b0b0 - >; - }; + pinctrl_gpt_input_capture0: gptinputcapture0grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x1b0b0 + >; + }; - pinctrl_gpt_input_capture1: gptinputcapture1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x1b0b0 - >; - }; + pinctrl_gpt_input_capture1: gptinputcapture1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x1b0b0 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + >; + }; - pinctrl_weim_cs0: weimcs0grp { - fsl,pins = < - MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 - >; - }; + pinctrl_weim_cs0: weimcs0grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; - pinctrl_weim_nor: weimnorgrp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 - MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 - MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 - MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 - MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 - MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 - MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 - MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 - MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 - MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 - MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 - MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 - MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 - MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 - MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 - MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 - MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 - MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 - MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 - MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 - MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 - MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 - MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 - MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 - MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 - MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 - MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 - MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 - MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 - MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 - MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 - MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 - MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 - MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 - MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 - MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 - MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 - MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 - MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 - MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 - MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 - MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 - MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 - >; - }; + pinctrl_weim_nor: weimnorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; }; }; @@ -786,7 +789,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -802,7 +805,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi index 84c8a9531e18..bdef7e642d3c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi @@ -99,7 +99,7 @@ #clock-cells = <0>; clock-frequency = <22000000>; clock-output-names = "mipi_pwm3"; - pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */ + pwms = <&pwm3 0 45 0>; /* 1 / 45 ns = 22 MHz */ status = "okay"; }; @@ -162,7 +162,7 @@ backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -171,7 +171,7 @@ backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; @@ -389,243 +389,241 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6q-sabrelite { - pinctrl_hog: hoggrp { - fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + >; + }; - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; - pinctrl_can_xcvr: can-xcvrgrp { - fsl,pins = < - /* Flexcan XCVR enable */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - >; - }; + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - /* Phy reset */ - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + /* Phy reset */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 + >; + }; - pinctrl_gpio_keys: gpio-keysgrp { - fsl,pins = < - /* Power Button */ - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 - /* Menu Button */ - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - /* Home Button */ - MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 - /* Back Button */ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - /* Volume Up Button */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 - /* Volume Down Button */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0 - >; - }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0 + >; + }; - pinctrl_j15: j15grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 - >; - }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; - pinctrl_ov5640: ov5640grp { - fsl,pins = < - MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0 - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 - >; - }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + >; + }; - pinctrl_ov5642: ov5642grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 - MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 - MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 - >; - }; + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 - >; - }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */ - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */ + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ + >; }; }; @@ -654,21 +652,18 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index 4fe58764b929..960e83f5e904 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -113,13 +113,13 @@ "DMICDAT", "DMIC"; mux-int-port = <2>; mux-ext-port = <3>; - hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>; - mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + hp-det-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + mic-det-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; status = "okay"; @@ -480,251 +480,247 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6qdl-sabresd { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; - pinctrl_hdmi_cec: hdmicecgrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_hp: hpgrp { - fsl,pins = < - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1 - >; - }; + pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 - >; - }; + pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp { - fsl,pins = < - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 - >; - }; + pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 + >; + }; - pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1 - >; - }; + pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1 + >; + }; - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 - >; - }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; - pinctrl_ov5640: ov5640grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 - MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 - >; - }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 + >; + }; - pinctrl_ov5642: ov5642grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 - MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 - >; - }; + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; - pinctrl_pcie_reg: pciereggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 - >; - }; + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_sensors_reg: sensorsreggrp { - fsl,pins = < - MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 - >; - }; + pinctrl_sensors_reg: sensorsreggrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 - MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 - MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 - MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; }; - gpio_leds { - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; }; }; @@ -755,7 +751,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -809,6 +804,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi index 02e6d36e85fa..6823a639ed2f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi @@ -83,7 +83,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <4>; power-supply = <®_3p3v>; - pwms = <&pwm1 0 10000>; + pwms = <&pwm1 0 10000 0>; }; reg_3p3v: regulator-3p3v { @@ -140,7 +140,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi index d59d5d0e1d19..6ab71a729fd8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi @@ -282,7 +282,6 @@ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi index 234827e554d0..60e446ba8f52 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi @@ -93,49 +93,47 @@ &iomuxc { pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>; - solidsense { - pinctrl_solidsense_hog: solidsense-hog { - fsl,pins = < - /* Nordic RESET_N */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1 - /* Nordic Chip 1 SWDIO - GPIO 125 */ - MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1 - /* Nordic Chip 1 SWDCLK - GPIO 59 */ - /* already claimed in the HB2 hogs */ - /* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */ - /* Nordic Chip 2 SWDIO - GPIO 81 */ - MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1 - /* Nordic Chip 2 SWCLK - GPIO 82 */ - MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1 - >; - }; + pinctrl_solidsense_hog: solidsense-hoggrp { + fsl,pins = < + /* Nordic RESET_N */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1 + /* Nordic Chip 1 SWDIO - GPIO 125 */ + MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1 + /* Nordic Chip 1 SWDCLK - GPIO 59 */ + /* already claimed in the HB2 hogs */ + /* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */ + /* Nordic Chip 2 SWDIO - GPIO 81 */ + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1 + /* Nordic Chip 2 SWCLK - GPIO 82 */ + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1 + >; + }; - pinctrl_solidsense_leds: solidsense-leds { - fsl,pins = < - /* Red LED 1 - GPIO 58 */ - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1 - /* Green LED 1 - GPIO 55 */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1 - /* Red LED 2 - GPIO 57 */ - MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1 - /* Green LED 2 - GPIO 56 */ - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1 - >; - }; + pinctrl_solidsense_leds: solidsense-ledsgrp { + fsl,pins = < + /* Red LED 1 - GPIO 58 */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1 + /* Green LED 1 - GPIO 55 */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1 + /* Red LED 2 - GPIO 57 */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1 + /* Green LED 2 - GPIO 56 */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1 + >; + }; - pinctrl_solidsense_uart2: solidsense-uart2 { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_solidsense_uart2: solidsense-uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_solidsense_uart3: solidsense-uart3 { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_solidsense_uart3: solidsense-uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi index b55af61dfeca..e491f5c9d455 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi @@ -70,55 +70,53 @@ }; &iomuxc { - microsom { - pinctrl_microsom_brcm_bt: microsom-brcm-bt { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 - MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070 - MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 - >; - }; + pinctrl_microsom_brcm_bt: microsom-brcm-btgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070 + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 + >; + }; - pinctrl_microsom_brcm_osc: microsom-brcm-osc { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 - >; - }; + pinctrl_microsom_brcm_osc: microsom-brcm-oscgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 + >; + }; - pinctrl_microsom_brcm_reg: microsom-brcm-reg { - fsl,pins = < - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070 - >; - }; + pinctrl_microsom_brcm_reg: microsom-brcm-reggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070 + >; + }; - pinctrl_microsom_brcm_wifi: microsom-brcm-wifi { - fsl,pins = < - MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070 - MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 - MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070 - >; - }; + pinctrl_microsom_brcm_wifi: microsom-brcm-wifigrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070 + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070 + >; + }; - pinctrl_microsom_uart4: microsom-uart4 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 - MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 - >; - }; + pinctrl_microsom_uart4: microsom-uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; - pinctrl_microsom_usdhc1: microsom-usdhc1 { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - >; - }; + pinctrl_microsom_usdhc1: microsom-usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi index 5f3b8baab20f..ddca24414d26 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi @@ -40,22 +40,20 @@ */ &iomuxc { - microsom { - pinctrl_microsom_usdhc3: microsom-usdhc3 { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 - >; - }; + pinctrl_microsom_usdhc3: microsom-usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi index 352ac585ca6b..cd1e682f11ad 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi @@ -76,56 +76,54 @@ }; &iomuxc { - microsom { - pinctrl_microsom_ti_bt: microsom-ti-bt { - fsl,pins = < - /* BT_EN_SOC */ - MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 - >; - }; + pinctrl_microsom_ti_bt: microsom-ti-btgrp { + fsl,pins = < + /* BT_EN_SOC */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 + >; + }; - pinctrl_microsom_ti_clk: microsom-ti-clk { - fsl,pins = < - /* EXT_32K */ - MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 - /* WL_XTAL_PU (unrouted) */ - MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 - >; - }; + pinctrl_microsom_ti_clk: microsom-ti-clkgrp { + fsl,pins = < + /* EXT_32K */ + MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 + /* WL_XTAL_PU (unrouted) */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 + >; + }; - pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en { - fsl,pins = < - /* WLAN_EN_SOC */ - MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 - >; - }; + pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-engrp { + fsl,pins = < + /* WLAN_EN_SOC */ + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 + >; + }; - pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq { - fsl,pins = < - /* WLAN_IRQ */ - MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 - >; - }; + pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irqgrp { + fsl,pins = < + /* WLAN_IRQ */ + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 + >; + }; - pinctrl_microsom_uart4: microsom-uart4 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 - MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 - >; - }; + pinctrl_microsom_uart4: microsom-uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; - pinctrl_microsom_usdhc1: microsom-usdhc1 { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - >; - }; + pinctrl_microsom_usdhc1: microsom-usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi index ce543e325cd3..7af74b203e39 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi @@ -97,57 +97,55 @@ }; &iomuxc { - microsom { - pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - /* AR8035 reset */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 - /* AR8035 interrupt */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 - /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 - /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 - /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + pinctrl_microsom_enet_ar8035: microsom-enet-ar8035grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + /* AR8035 reset */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 - /* - * As the RMII pins are also connected to RGMII - * so that an AR8030 can be placed, set these - * to high-z with the same pulls as above. - * Use the GPIO settings to avoid changing the - * input select registers. - */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 - >; - }; + /* + * As the RMII pins are also connected to RGMII + * so that an AR8030 can be placed, set these + * to high-z with the same pulls as above. + * Use the GPIO settings to avoid changing the + * input select registers. + */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 + >; + }; - pinctrl_microsom_uart1: microsom-uart1 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_microsom_uart1: microsom-uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi index 344ea935c7da..07492f63a1f8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi @@ -7,16 +7,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -/ { - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "supply-3p3v"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -25,11 +15,16 @@ m25p80: flash@0 { compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; + spi-max-frequency = <50000000>; + vcc-supply = <&sw4_reg>; m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; @@ -59,20 +54,6 @@ >; }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 - >; - }; - - pinctrl_i2c3_recovery: i2c3recoverygrp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899 - MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899 - >; - }; - pinctrl_pmic: pmicgrp { fsl,pins = < MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */ @@ -133,7 +114,7 @@ }; sw4_reg: sw4 { - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -197,7 +178,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vmmc-supply = <®_3p3v>; + vmmc-supply = <&sw4_reg>; non-removable; disable-wp; no-sd; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi index 68525f0205d3..e8fd37dd8835 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi @@ -27,17 +27,17 @@ reg = <0x08>; }; - sensor@48 { - compatible = "national,lm75"; + temperature-sensor@48 { + compatible = "national,lm75a"; reg = <0x48>; - vs-supply = <®_3p3v>; + vs-supply = <&sw4_reg>; }; eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; - vcc-supply = <®_3p3v>; + vcc-supply = <&sw4_reg>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi index aeba0a273600..0e404c1f62f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi @@ -20,16 +20,32 @@ reg = <0x08>; }; - sensor@48 { - compatible = "national,lm75"; + temperature-sensor@48 { + compatible = "national,lm75a"; reg = <0x48>; - vs-supply = <®_3p3v>; + vs-supply = <&sw4_reg>; }; eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; - vcc-supply = <®_3p3v>; + vcc-supply = <&sw4_reg>; + }; +}; + +&iomuxc { + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi index e2db875b61c4..11c70431feec 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi @@ -265,7 +265,7 @@ >; }; - pinctrl_ecspi2: ecspi2 { + pinctrl_ecspi2: ecspi2grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 @@ -280,7 +280,7 @@ >; }; - pinctrl_enet: enet { + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi index 79f2354886b7..77594546ef37 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi @@ -51,7 +51,6 @@ pinctrl-0 = <&pinctrl_lcd1_pwr>; enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; power-supply = <®_3v3>; - turn-on-delay-ms = <35>; /* * a poor man's way to create a 1:1 relationship between * the PWM value and the actual duty cycle @@ -110,7 +109,7 @@ }; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -126,8 +125,7 @@ pixelclk-active = <0>; }; - ETV570 { - u-boot,panel-name = "edt,et057090dhu"; + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -143,8 +141,7 @@ pixelclk-active = <0>; }; - ET0350 { - u-boot,panel-name = "edt,et0350g0dh6"; + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -160,8 +157,7 @@ pixelclk-active = <0>; }; - ET0430 { - u-boot,panel-name = "edt,et0430g0dh6"; + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -177,7 +173,7 @@ pixelclk-active = <1>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -193,8 +189,7 @@ pixelclk-active = <0>; }; - ET0700 { /* same as ET0500 */ - u-boot,panel-name = "edt,etm0700g0dh6"; + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -210,7 +205,7 @@ pixelclk-active = <0>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; @@ -226,8 +221,7 @@ pixelclk-active = <0>; }; - CoMTFT { /* same as ET0700 but with inverted pixel clock */ - u-boot,panel-name = "edt,etm0700g0edh6"; + timing-comtft { /* same as ET0700 but with inverted pixel clock */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi index 2ca2eb37e14f..4eb53d5677a6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi @@ -127,8 +127,7 @@ }; display-timings { - hsd100pxn1 { - u-boot,panel-name = "hannstar,hsd100pxn1"; + timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -142,7 +141,7 @@ pixelclk-active = <1>; }; - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -158,8 +157,7 @@ pixelclk-active = <0>; }; - nl12880bc20 { - u-boot,panel-name = "nlt,nl12880bc20-spwg-24"; + timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; @@ -175,8 +173,7 @@ pixelclk-active = <1>; }; - ET0700 { - u-boot,panel-name = "edt,etm0700g0dh6"; + timing-et0700 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -192,8 +189,7 @@ pixelclk-active = <0>; }; - ETV570 { - u-boot,panel-name = "edt,et057090dhu"; + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -224,7 +220,7 @@ }; display-timings { - hsd100pxn1 { + timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -238,7 +234,7 @@ pixelclk-active = <1>; }; - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -254,7 +250,7 @@ pixelclk-active = <0>; }; - nl12880bc20 { + timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi index 99ec7a838f8d..bae7313d729d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi @@ -42,13 +42,11 @@ / { backlight0 { pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; power-supply = <®_lcd1_pwr>; }; backlight1 { pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; power-supply = <®_lcd1_pwr>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi index e2fe337f7d9e..2fa37d1b16cc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi @@ -70,9 +70,8 @@ #address-cells = <1>; #size-cells = <0>; - mclk: clock@0 { + mclk: clock { compatible = "fixed-clock"; - reg = <0>; #clock-cells = <0>; clock-frequency = <26000000>; }; @@ -373,7 +372,7 @@ >; }; - pinctrl_disp0_1: disp0grp-1 { + pinctrl_disp0_1: disp0-1-grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 @@ -406,7 +405,7 @@ >; }; - pinctrl_disp0_2: disp0grp-2 { + pinctrl_disp0_2: disp0-2-grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi index 647ba5e623dd..2be7dc4a9781 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi @@ -59,16 +59,6 @@ }; }; - reg_usb_h1_vbus: regulator-usb-h1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - reg_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "lcd_panel"; @@ -127,132 +117,130 @@ }; &iomuxc { - imx6q-udoo { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1 + >; + }; - pinctrl_panel: panelgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70 - >; - }; + pinctrl_panel: panelgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70 + >; + }; - pinctrl_power_off: poweroffgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30 - >; - }; + pinctrl_power_off: poweroffgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30 + >; + }; - pinctrl_touchscreenp7: touchscreenp7grp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70 - MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 - >; - }; + pinctrl_touchscreenp7: touchscreenp7grp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbh: usbhgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 - MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 - >; - }; + pinctrl_usbh: usbhgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; - pinctrl_usbotg: usbotg { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059 - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; - pinctrl_ac97_running: ac97running { - fsl,pins = < - MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - >; - }; + pinctrl_ac97_running: ac97runninggrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; - pinctrl_ac97_warm_reset: ac97warmreset { - fsl,pins = < - MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - >; - }; + pinctrl_ac97_warm_reset: ac97warmresetgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; - pinctrl_ac97_reset: ac97reset { - fsl,pins = < - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - >; - }; + pinctrl_ac97_reset: ac97resetgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; }; }; @@ -285,9 +273,18 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks IMX6QDL_CLK_CKO>; - status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + }; }; &usbotg { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi index 200559d7158d..7749074e438d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi @@ -194,7 +194,7 @@ }; &iomuxc { - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 @@ -205,7 +205,7 @@ >; }; - pinctrl_bt: bt { + pinctrl_bt: btgrp { fsl,pins = < /* Bluetooth enable */ MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b1 @@ -346,7 +346,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 @@ -357,7 +357,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170F9 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100F9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi index a1ea33c4eeb7..2bff5f92242a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi @@ -436,7 +436,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 @@ -451,7 +451,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 @@ -529,11 +529,11 @@ }; &usbphy1 { - fsl,tx-d-cal = <0x5>; + fsl,tx-d-cal = <106>; }; &usbphy2 { - fsl,tx-d-cal = <0x5>; + fsl,tx-d-cal = <106>; }; &usdhc1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi index e781a45785ed..3a21ae942273 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi @@ -9,22 +9,20 @@ &iomuxc { pinctrl-0 = <&pinctrl_hog>; - imx6qdl-wandboard { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x0f0b0 /* WL_RST_N */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ - MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */ - MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */ - MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x0f0b0 /* WL_RST_N */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi index 3874e74703f0..cc707972f548 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi @@ -7,24 +7,22 @@ #include "imx6qdl-wandboard.dtsi" &iomuxc { - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_hog_c1>; - imx6qdl-wandboard { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ - MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON (unused) */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE, input */ - MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x0f0b0 /* GPIO5_IO31 (Wifi Power Enable) */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE (unused) */ - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000 /* BT_ON */ - MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x80000000 /* BT_WAKE */ - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 /* BT_HOST_WAKE */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ - >; - }; + pinctrl_hog_c1: hogc1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON (unused) */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE, input */ + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x0f0b0 /* GPIO5_IO31 (Wifi Power Enable) */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE (unused) */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000 /* BT_ON */ + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x80000000 /* BT_WAKE */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 /* BT_HOST_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi index 9b8c9c23ab54..8d44e758f1f3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi @@ -137,49 +137,47 @@ }; &iomuxc { - pinctrl-0 = <&pinctrl_hog>; - - imx6qdl-wandboard { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */ - >; - }; + pinctrl-0 = <&pinctrl_hog_d1>; + + pinctrl_hog_d1: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - >; - }; + enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi index 38abb6b50f6c..26489eccd5fb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi @@ -26,11 +26,16 @@ mux-ext-port = <3>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; reg_1p5v: regulator-1p5v { @@ -152,146 +157,143 @@ &iomuxc { pinctrl-names = "default"; - imx6qdl-wandboard { - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c1_gpio: i2c1gpiogrp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b0 - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b0 - >; - }; + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b0 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b0 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2_gpio: i2c2gpiogrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b0 - MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b0 - >; - }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b0 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b0 + >; + }; - pinctrl_mclk: mclkgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_mclk: mclkgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_ov5645: ov5645grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 - MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 - >; - }; + pinctrl_ov5645: ov5645grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usbotgvbus: usbotgvbusgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 - >; - }; + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index 8431b8a994f4..45bcfd7faf9d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -397,11 +397,10 @@ reg = <0x02024000 0x4000>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_ESAI_IPG>, - <&clks IMX6QDL_CLK_ESAI_MEM>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, <&clks IMX6QDL_CLK_ESAI_IPG>, <&clks IMX6QDL_CLK_SPBA>; - clock-names = "core", "mem", "extal", "fsys", "spba"; + clock-names = "core", "extal", "fsys", "spba"; dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; dma-names = "rx", "tx"; status = "disabled"; @@ -712,8 +711,8 @@ reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3150000>; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; regulator-always-on; anatop-reg-offset = <0x120>; anatop-vol-bit-shift = <8>; @@ -807,6 +806,7 @@ reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBPHY1>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; }; @@ -815,6 +815,7 @@ reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBPHY2>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts index ae00d538a4df..fbe260c9872e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts @@ -548,7 +548,7 @@ >; }; - pinctrl_wifi_npd: wifinpd { + pinctrl_wifi_npd: wifinpdgrp { fsl,pins = < /* WL_REG_ON */ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts index 2bb3bfb18ec3..c5b220aeaefd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts @@ -22,27 +22,25 @@ }; &iomuxc { - imx6qdl-sabreauto { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts index f69eec18d865..792697bd4551 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts @@ -17,36 +17,34 @@ }; &iomuxc { - imx6qdl-sabresd { - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 - MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 - MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 - MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts index 4077b607c29e..e42c274a9014 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts @@ -3,7 +3,7 @@ * Copyright (C) 2021 DH electronics GmbH * * DHCOM iMX6 variant: - * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2 + * DHCM-iMX6S-C080-R102-F0409-E-CAN2-RTC-I-01D2 * DHCOM PCB number: 493-400 or newer * DRC02 PCB number: 568-100 or newer */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts index 239bc6dfc584..036705b783f4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts @@ -23,7 +23,7 @@ backlight_display: backlight_display { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; @@ -108,7 +108,7 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <3>; - hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; + hp-det-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; }; panel { @@ -287,271 +287,269 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6sl-evk { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 - MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 - MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 - MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 - MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 - MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 - MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 - MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 + MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + >; + }; - pinctrl_audmux3: audmux3grp { - fsl,pins = < - MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 - MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 - MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 - MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 - >; - }; + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 - MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 - MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 - MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 - MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 - MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 - MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 - MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 - MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 - MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 - MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 - MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; - pinctrl_fec_sleep: fecgrp-sleep { - fsl,pins = < - MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 - MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 - MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 - MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 - MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 - MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 - MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 - MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 - >; - }; + pinctrl_fec_sleep: fec-sleep-grp { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; - pinctrl_hp: hpgrp { - fsl,pins = < - MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0 - >; - }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 - MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1 - MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_kpp: kppgrp { - fsl,pins = < - MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 - MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010 - MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0 - MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0 - MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0 - MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0 - >; - }; + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 + MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010 + MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0 + MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0 + MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0 + MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0 + >; + }; - pinctrl_lcd: lcdgrp { - fsl,pins = < - MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 - MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 - MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 - MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 - MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 - MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 - MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 - MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 - MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 - MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 - MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 - MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 - MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 - MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 - MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 - MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 - MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 - MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 - MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 - MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 - MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 - MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 - MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 - MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 - MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 - MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 - MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 - MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 - >; - }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; - pinctrl_led: ledgrp { - fsl,pins = < - MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 - >; - }; + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; - pinctrl_pwm1: pwmgrp { - fsl,pins = < - MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 - >; - }; + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; - pinctrl_reg_lcd_3v3: reglcd3v3grp { - fsl,pins = < - MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 - >; - }; + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 - MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg1: usbotg1grp { - fsl,pins = < - MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 - >; - }; + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 - MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 - MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 - MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 - MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9 - MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9 - MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9 - MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9 - MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9 - MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 - MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 - MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 - MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 - >; - }; + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 - MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9 - MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 - MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 - MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 - MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 - MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9 - MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9 - MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9 - MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9 - >; - }; + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 - >; - }; + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 - MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 - MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 - MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 - MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 - MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 - >; - }; + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; }; }; @@ -584,10 +582,8 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; }; ®_vdd1p1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts index 5636fb3661e8..56040da0bd25 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts @@ -138,7 +138,7 @@ pinctrl-0 = <&pinctrl_zforce>; reg = <0x50>; interrupt-parent = <&gpio5>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&ldo1_reg>; reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; touchscreen-size-x = <1072>; @@ -163,7 +163,7 @@ pinctrl-0 = <&pinctrl_ricoh_gpio>; reg = <0x32>; interrupt-parent = <&gpio5>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; system-power-controller; regulators { @@ -382,7 +382,7 @@ >; }; - pinctrl_i2c1_sleep: i2c1grp-sleep { + pinctrl_i2c1_sleep: i2c1sleep-grp { fsl,pins = < MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 @@ -396,7 +396,7 @@ >; }; - pinctrl_i2c2_sleep: i2c2grp-sleep { + pinctrl_i2c2_sleep: i2c2sleep-grp { fsl,pins = < MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 @@ -456,7 +456,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 @@ -467,7 +467,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 @@ -478,7 +478,7 @@ >; }; - pinctrl_usdhc2_sleep: usdhc2grp-sleep { + pinctrl_usdhc2_sleep: usdhc2sleep-grp { fsl,pins = < MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 @@ -500,7 +500,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 @@ -511,7 +511,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 @@ -522,7 +522,7 @@ >; }; - pinctrl_usdhc3_sleep: usdhc3grp-sleep { + pinctrl_usdhc3_sleep: usdhc3sleep-grp { fsl,pins = < MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts index db5d8509935f..5ba6f15e9ed5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts @@ -111,7 +111,7 @@ >; }; - pinctrl_i2c1_sleep: i2c1grp-sleep { + pinctrl_i2c1_sleep: i2c1sleep-grp { fsl,pins = < MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 @@ -125,7 +125,7 @@ >; }; - pinctrl_i2c2_sleep: i2c2grp-sleep { + pinctrl_i2c2_sleep: i2c2sleep-grp { fsl,pins = < MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 @@ -190,7 +190,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 @@ -201,7 +201,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 @@ -212,7 +212,7 @@ >; }; - pinctrl_usdhc2_sleep: usdhc2grp-sleep { + pinctrl_usdhc2_sleep: usdhc2sleep-grp { fsl,pins = < MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 @@ -234,7 +234,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 @@ -245,7 +245,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 @@ -256,7 +256,7 @@ >; }; - pinctrl_usdhc3_sleep: usdhc3grp-sleep { + pinctrl_usdhc3_sleep: usdhc3sleep-grp { fsl,pins = < MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts index 6bc342035e2b..a2534c422a52 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts @@ -111,7 +111,7 @@ >; }; - pinctrl_i2c1_sleep: i2c1grp-sleep { + pinctrl_i2c1_sleep: i2c1sleep-grp { fsl,pins = < MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 @@ -125,7 +125,7 @@ >; }; - pinctrl_i2c2_sleep: i2c2grp-sleep { + pinctrl_i2c2_sleep: i2c2sleep-grp { fsl,pins = < MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts index 9d7c8884892a..a5d48c382314 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts @@ -125,110 +125,108 @@ }; &iomuxc { - imx6sl-warp { - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1 - MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1 - >; - }; - - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1 - MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1 - MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1 - MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1 - MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 - MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059 - MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059 - MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059 - MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059 - MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059 - MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059 - MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 - MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 - MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 - MX6SL_PAD_SD2_RST__SD2_RESET 0x417059 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9 - MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9 - MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9 - MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9 - MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9 - MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9 - MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9 - MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 - MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 - MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 - MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9 - MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9 - MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9 - MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9 - MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9 - MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9 - MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9 - MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 - MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 - MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 - MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059 - MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059 - MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059 - MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059 - MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059 - MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9 - MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9 - MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9 - MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9 - MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9 - MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9 - MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9 - MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9 - MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9 - MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9 - MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1 + >; + }; + + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1 + MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1 + MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1 + MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1 + MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 + MX6SL_PAD_SD2_RST__SD2_RESET 0x417059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 + MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 + MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi index 6aa61235e39e..7381fb7f8912 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi @@ -378,7 +378,7 @@ }; gpt: timer@2098000 { - compatible = "fsl,imx6sl-gpt"; + compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_GPT>, @@ -546,8 +546,8 @@ reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3150000>; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; regulator-always-on; anatop-reg-offset = <0x120>; anatop-vol-bit-shift = <8>; @@ -631,6 +631,7 @@ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; }; @@ -639,6 +640,7 @@ reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USBPHY1>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; }; @@ -647,6 +649,7 @@ reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USBPHY2>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; }; @@ -859,7 +862,7 @@ }; usdhc1: mmc@2190000 { - compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + compatible = "fsl,imx6sl-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USDHC1>, @@ -871,7 +874,7 @@ }; usdhc2: mmc@2194000 { - compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + compatible = "fsl,imx6sl-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USDHC2>, @@ -883,7 +886,7 @@ }; usdhc3: mmc@2198000 { - compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + compatible = "fsl,imx6sl-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USDHC3>, @@ -895,7 +898,7 @@ }; usdhc4: mmc@219c000 { - compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + compatible = "fsl,imx6sl-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USDHC4>, diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts index e3e9b0ec4f73..814401486792 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts @@ -26,7 +26,7 @@ backlight_display: backlight-display { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; @@ -157,7 +157,7 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <3>; - hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>; + hp-det-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; }; }; @@ -314,10 +314,8 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; }; &snvs_poweroff { @@ -463,7 +461,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp-100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 @@ -474,7 +472,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp-200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 @@ -501,7 +499,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 @@ -517,7 +515,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 @@ -551,7 +549,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1 @@ -563,7 +561,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts new file mode 100644 index 000000000000..33756d6de7aa --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Kobo Clara 2E rev A ebook reader + * + * Name on mainboard is: 37NB-E60K2M+4A2 + * Serials start with: E60K2M (a number also seen in + * vendor kernel sources) + * + * Copyright 2024 Andreas Kemnade + */ + +/dts-v1/; + +#include "imx6sll-kobo-clara2e-common.dtsi" + +/ { + model = "Kobo Clara 2E"; + compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll"; +}; + +&i2c2 { + /* EPD PMIC SY7636 at 0x62 */ +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts new file mode 100644 index 000000000000..f81aeacf5142 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Kobo Clara 2E rev B ebook reader + * + * Name on mainboard is: 37NB-E60K2M+4B0 + * Serials start with: E60K2M (a number also seen in + * vendor kernel sources) + * + * Copyright 2024 Andreas Kemnade + */ + +/dts-v1/; + +#include "imx6sll-kobo-clara2e-common.dtsi" + +/ { + model = "Kobo Clara 2E"; + compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll"; +}; + +&i2c2 { + /* EPD PMIC JD9930 at 0x18 */ +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi new file mode 100644 index 000000000000..6f2deb366e02 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi @@ -0,0 +1,511 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Common part for Kobo Clara 2e device tree + * Copyright 2024 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6sll.dtsi" + +/ { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-cover { + label = "Cover"; + gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&buck1>; + soc-supply = <&buck2>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + clock-frequency = <100000>; + status = "okay"; + + /* backlight aw99703 at 0x36 */ +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; + + /* backlight aw99703 at 0x36 */ + + touchscreen@38 { + compatible = "focaltech,ft5426"; + reg = <0x38>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&pinctrl_touch_gpio>; + pinctrl-1 = <&pinctrl_touch_gpio_sleep>; + interrupt-parent = <&gpio4>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1072>; + touchscreen-size-y = <1448>; + touchscreen-swapped-x-y; + }; +}; + +&i2c3 { + /* Bus seems to be in bad state after boot, allow full recovery */ + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + clock-frequency = <100000>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71879", "rohm,bd71828"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bd71828>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + system-power-controller; + clocks = <&clks 0>; + #clock-cells = <0>; + clock-output-names = "bd71828-32k-out"; + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <0 1>, <2 1>; + + /* charge sense resistor is 30 milli-ohm */ + + regulators { + LDO1 { + name = "LDO1"; + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + LDO2 { + name = "LDO2"; + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + LDO3 { + name = "LDO3"; + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4: LDO4 { + name = "LDO4"; + regulator-name = "ldo4"; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + LDO5 { + name = "LDO5"; + regulator-name = "ldo5"; + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + LDO6 { + name = "LDO6"; + regulator-name = "ldo6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO7 { + name = "LDO7"; + regulator-name = "ldo7"; + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buck1: BUCK1 { + name = "BUCK1"; + regulator-name = "buck1"; + regulator-always-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + + buck2: BUCK2 { + name = "BUCK2"; + regulator-name = "buck2"; + regulator-always-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + BUCK3 { + name = "BUCK3"; + regulator-name = "buck3"; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + BUCK4 { + name = "BUCK4"; + regulator-name = "buck4"; + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + }; + + BUCK5 { + name = "BUCK5"; + regulator-name = "buck5"; + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + BUCK6 { + name = "BUCK6"; + regulator-name = "buck6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + }; + + BUCK7 { + name = "BUCK7"; + regulator-name = "buck7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_bd71828: bd71828-gpiogrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x1b8b1 + MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x1b8b1 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */ + MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x17059 /* HALL_EN */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1-sleepgrp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2-sleepgrp { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x4001f8b1 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059 + >; + }; + + pinctrl_touch_gpio: touch-gpiogrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* TP_INT */ + MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x10059 /* TP_RST */ + >; + }; + + pinctrl_touch_gpio_sleep: touch-gpio-sleepgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x10059 /* TP_INT */ + MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x10059 /* TP_RST */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x41b0b1 + MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x41b0b1 + MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x41b0b1 + MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x41b0b1 + >; + }; + + pinctrl_uart2_sleep: uart2-sleepgrp { + fsl,pins = < + MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x10059 + MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x10059 + MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x10059 + MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x10059 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x100f9 + MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x100f9 + MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x100f9 + MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1 + MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1 + MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1 + MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 + >; + }; +}; + +&snvs_rtc { + /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_uart2>; + pinctrl-1 = <&pinctrl_uart2_sleep>; + status = "okay"; + + /* requires LDO4 + power enable gpio */ + bluetooth { + compatible = "nxp,88w8987-bt"; + fw-init-baudrate = <1500000>; + }; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + /* card requires also ldo4 */ + vmmc-supply = <®_wifi>; + cap-power-off-card; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts index c7cfe0b70f04..18c9ac8f7560 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts @@ -121,7 +121,7 @@ >; }; - pinctrl_i2c1_sleep: i2c1grp-sleep { + pinctrl_i2c1_sleep: i2c1sleep-grp { fsl,pins = < MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 @@ -135,7 +135,7 @@ >; }; - pinctrl_i2c2_sleep: i2c2grp-sleep { + pinctrl_i2c2_sleep: i2c2sleep-grp { fsl,pins = < MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 @@ -200,7 +200,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 @@ -211,7 +211,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 @@ -222,7 +222,7 @@ >; }; - pinctrl_usdhc2_sleep: usdhc2grp-sleep { + pinctrl_usdhc2_sleep: usdhc2sleep-grp { fsl,pins = < MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 @@ -244,7 +244,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9 @@ -255,7 +255,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9 @@ -266,7 +266,7 @@ >; }; - pinctrl_usdhc3_sleep: usdhc3grp-sleep { + pinctrl_usdhc3_sleep: usdhc3sleep-grp { fsl,pins = < MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts index 7e4f38dd11e2..660620d226f7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts @@ -121,7 +121,7 @@ >; }; - pinctrl_i2c1_sleep: i2c1grp-sleep { + pinctrl_i2c1_sleep: i2c1sleep-grp { fsl,pins = < MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 @@ -135,7 +135,7 @@ >; }; - pinctrl_i2c2_sleep: i2c2grp-sleep { + pinctrl_i2c2_sleep: i2c2sleep-grp { fsl,pins = < MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi index 3659fd5ecfa6..8c5ca4f9b87f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi @@ -173,7 +173,7 @@ "rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", - "rxtx7", "dma"; + "rxtx7", "spba"; status = "disabled"; }; @@ -358,7 +358,7 @@ }; gpt1: timer@2098000 { - compatible = "fsl,imx6sl-gpt"; + compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SLL_CLK_GPT_BUS>, @@ -507,12 +507,9 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - reg_3p0: regulator-3p0@20c8120 { + reg_3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; - reg = <0x20c8120>; regulator-name = "vdd3p0"; regulator-min-microvolt = <2625000>; regulator-max-microvolt = <3400000>; @@ -525,7 +522,7 @@ anatop-enable-bit = <0>; }; - tempmon: temperature-sensor { + tempmon: tempmon { compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpc>; @@ -533,6 +530,7 @@ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; }; @@ -601,6 +599,18 @@ #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; + clocks = <&clks IMX6SLL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + }; }; iomuxc: pinctrl@20e0000 { @@ -683,7 +693,6 @@ clocks = <&clks IMX6SLL_CLK_USBOH3>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; - fsl,anatop = <&anatop>; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; rx-burst-size-dword = <0x10>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts index cd9cbc9ccc9e..1c1515a854c8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts @@ -18,7 +18,7 @@ backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_3p3v>; @@ -83,7 +83,7 @@ sound { compatible = "fsl,imx-audio-sgtl5000"; model = "imx6sx-nitrogen6sx-sgtl5000"; - cpu-dai = <&ssi1>; + ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "MIC_IN", "Mic Jack", @@ -229,10 +229,8 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; }; &ssi1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts index b0c27b9b0244..033700e052b3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts @@ -97,11 +97,16 @@ "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; }; @@ -328,7 +333,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 @@ -343,7 +348,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index c6e85e4a0883..67cf09e63a63 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -23,7 +23,7 @@ backlight_display: backlight-display { compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; @@ -167,7 +167,7 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <6>; - hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>; + hp-det-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; panel { @@ -183,12 +183,17 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { - compatible = "fsl,imx-audio-spdif", - "fsl,imx6sx-sdb-spdif"; + compatible = "fsl,imx6sx-sdb-spdif", + "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; @@ -295,10 +300,8 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; }; &snvs_poweroff { @@ -396,323 +399,321 @@ }; &iomuxc { - imx6x-sdb { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 - MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 - MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 - MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 - MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 + MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 + MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 + MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 - MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 - MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 - MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 - MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 - MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 - MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 - /* phy reset */ - MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0 - >; - }; + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + /* phy reset */ + MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0 + >; + }; - pinctrl_enet_3v3: enet3v3grp { - fsl,pins = < - MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 - >; - }; + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 + >; + }; - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 - MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 - MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 - MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 - >; - }; + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 - MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 - MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 + >; + }; - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 - MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 - >; - }; + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 + MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 + >; + }; - pinctrl_hp: hpgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059 - >; - }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 - MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 - MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 - MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 + MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 + >; + }; - pinctrl_lcd: lcdgrp { - fsl,pins = < - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - >; - }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; - pinctrl_mqs: mqsgrp { - fsl,pins = < - MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0 - MX6SX_PAD_SD2_CMD__MQS_LEFT 0x120b0 - >; - }; + pinctrl_mqs: mqsgrp { + fsl,pins = < + MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0 + MX6SX_PAD_SD2_CMD__MQS_LEFT 0x120b0 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 + >; + }; - pinctrl_pcie_reg: pciereggrp { - fsl,pins = < - MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 - >; - }; + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 + >; + }; - pinctrl_peri_3v3: peri3v3grp { - fsl,pins = < - MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 - >; - }; + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 + >; + }; - pinctrl_pwm3: pwm3grp-1 { - fsl,pins = < - MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 - >; - }; + pinctrl_pwm3: pwm3-1grp { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; - pinctrl_qspi2: qspi2grp { - fsl,pins = < - MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 - MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 - MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 - MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 - MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 - MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 - MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 - MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 - MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 - MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 - MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 - MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 - >; - }; + pinctrl_qspi2: qspi2grp { + fsl,pins = < + MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 + MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 + MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 + MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 + MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 + MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 + MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 + MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 + MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 + MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 + MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 + MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 + >; + }; - pinctrl_vcc_sd3: vccsd3grp { - fsl,pins = < - MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 - >; - }; + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; - pinctrl_sai1: sai1grp { - fsl,pins = < - MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0 - MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0 - MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0 - MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0 - MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 - >; - }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0 + MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0 + MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0 + MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 - MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x1b0b1 - MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x1b0b1 + >; + }; - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 - >; - }; + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 - >; - }; + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; - pinctrl_usb_otg2: usbot2ggrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 - >; - }; + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 - MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 - MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 - MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 - MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 - MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 - MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ - MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 - MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 - MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 - MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 - MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 - MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 - MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ - MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts index bfcd8f7d86dd..2ffbe2df4776 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts @@ -46,19 +46,19 @@ led-1 { label = "red"; max-brightness = <255>; - pwms = <&pwm6 0 50000>; + pwms = <&pwm6 0 50000 0>; }; led-2 { label = "green"; max-brightness = <255>; - pwms = <&pwm2 0 50000>; + pwms = <&pwm2 0 50000 0>; }; led-3 { label = "blue"; max-brightness = <255>; - pwms = <&pwm1 0 50000>; + pwms = <&pwm1 0 50000 0>; }; }; }; @@ -358,21 +358,21 @@ >; }; - pinctrl_pwm1: pwm1grp-1 { + pinctrl_pwm1: pwm1-1grp { fsl,pins = < /* blue LED */ MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1 >; }; - pinctrl_pwm2: pwm2grp-1 { + pinctrl_pwm2: pwm2-1grp { fsl,pins = < /* green LED */ MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1 >; }; - pinctrl_pwm6: pwm6grp-1 { + pinctrl_pwm6: pwm6-1grp { fsl,pins = < /* red LED */ MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1 @@ -414,7 +414,7 @@ >; }; - pinctrl_usdhc2_50mhz: usdhc2grp-50mhz { + pinctrl_usdhc2_50mhz: usdhc2-50mhzgrp { fsl,pins = < MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 @@ -427,7 +427,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9 MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9 @@ -438,7 +438,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9 MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9 @@ -449,7 +449,7 @@ >; }; - pinctrl_usdhc4_50mhz: usdhc4grp-50mhz { + pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp { fsl,pins = < MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 @@ -465,7 +465,7 @@ >; }; - pinctrl_usdhc4_100mhz: usdhc4-100mhz { + pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp { fsl,pins = < MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 @@ -480,7 +480,7 @@ >; }; - pinctrl_usdhc4_200mhz: usdhc4-200mhz { + pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp { fsl,pins = < MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 @@ -505,24 +505,18 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; }; &pwm2 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; }; &pwm6 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; - status = "okay"; }; ®_arm { diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi index 725d0b5cb55f..bbf792ac4896 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi @@ -72,6 +72,11 @@ }; }; +&clks { + assigned-clocks = <&clks IMX6SX_CLK_ENET_REF>; + assigned-clock-rates = <50000000>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index 0de359d62a47..5132b575b001 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -339,15 +339,14 @@ }; esai: esai@2024000 { - compatible = "fsl,imx6sx-esai", "fsl,imx35-esai"; + compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_ESAI_IPG>, - <&clks IMX6SX_CLK_ESAI_MEM>, <&clks IMX6SX_CLK_ESAI_EXTAL>, <&clks IMX6SX_CLK_ESAI_IPG>, <&clks IMX6SX_CLK_SPBA>; - clock-names = "core", "mem", "extal", + clock-names = "core", "extal", "fsys", "spba"; dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; @@ -638,8 +637,8 @@ reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3150000>; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; regulator-always-on; anatop-reg-offset = <0x120>; anatop-vol-bit-shift = <8>; @@ -716,13 +715,14 @@ }; tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + compatible = "fsl,imx6sx-tempmon"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; }; @@ -731,6 +731,7 @@ reg = <0x020c9000 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USBPHY1>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; }; @@ -739,6 +740,7 @@ reg = <0x020ca000 0x1000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USBPHY2>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; }; @@ -929,7 +931,6 @@ clocks = <&clks IMX6SX_CLK_USBOH3>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; - fsl,anatop = <&anatop>; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; rx-burst-size-dword = <0x10>; @@ -957,7 +958,6 @@ fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc 2>; phy_type = "hsic"; - fsl,anatop = <&anatop>; dr_mode = "host"; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; @@ -1001,7 +1001,7 @@ }; usdhc1: mmc@2190000 { - compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + compatible = "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USDHC1>, @@ -1015,7 +1015,7 @@ }; usdhc2: mmc@2194000 { - compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + compatible = "fsl,imx6sx-usdhc"; reg = <0x02194000 0x4000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USDHC2>, @@ -1029,7 +1029,7 @@ }; usdhc3: mmc@2198000 { - compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + compatible = "fsl,imx6sx-usdhc"; reg = <0x02198000 0x4000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USDHC3>, @@ -1043,7 +1043,7 @@ }; usdhc4: mmc@219c000 { - compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + compatible = "fsl,imx6sx-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USDHC4>, diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index f10f0525490b..911ccbd132cf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -16,7 +16,7 @@ backlight_display: backlight-display { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; @@ -62,13 +62,40 @@ gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; }; + reg_audio_5v: regulator-audio-pwr { + compatible = "regulator-fixed"; + regulator-name = "audio-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_1v8: regulator-audio-1v8 { + compatible = "regulator-fixed"; + regulator-name = "audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + sound-wm8960 { compatible = "fsl,imx-audio-wm8960"; model = "wm8960-audio"; audio-cpu = <&sai2>; audio-codec = <&codec>; audio-asrc = <&asrc>; - hp-det-gpio = <&gpio5 4 0>; + hp-det-gpios = <&gpio5 4 0>; audio-routing = "Headphone Jack", "HP_L", "Headphone Jack", "HP_R", @@ -139,6 +166,11 @@ wlf,gpio-cfg = <1 3>; clocks = <&clks IMX6UL_CLK_SAI2>; clock-names = "mclk"; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; }; camera@3c { @@ -277,7 +309,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -609,7 +640,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -621,7 +652,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts index ad7f63ca521a..0d3b1ab82eab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts @@ -112,7 +112,7 @@ >; }; - pinctrl_ecspi3_master: ecspi3grp1 { + pinctrl_ecspi3_master: ecspi3-1-grp { fsl,pins = < MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 @@ -121,7 +121,7 @@ >; }; - pinctrl_ecspi3_slave: ecspi3grp2 { + pinctrl_ecspi3_slave: ecspi3-2-grp { fsl,pins = < MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts index 1762bc47e18d..8aea8c99e2af 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts @@ -18,7 +18,7 @@ lcd_backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm5 0 50000>; + pwms = <&pwm5 0 50000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; @@ -168,7 +168,6 @@ }; &pwm5 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; status = "okay"; @@ -249,7 +248,7 @@ >; }; - pinctrl_ecspi1_master: ecspi1grp1 { + pinctrl_ecspi1_master: ecspi1-1-grp { fsl,pins = < MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0 MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0 @@ -310,7 +309,7 @@ >; }; - pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { + pinctrl_lcdif_dat0_17: lcdifdat0-17-grp { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 @@ -333,14 +332,14 @@ >; }; - pinctrl_lcdif_clken: lcdifctrlgrp1 { + pinctrl_lcdif_clken: lcdifctrl-1-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050 MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 >; }; - pinctrl_lcdif_hvsync: lcdifctrlgrp2 { + pinctrl_lcdif_hvsync: lcdifctrl-2-grp { fsl,pins = < MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 @@ -371,7 +370,7 @@ >; }; - pinctrl_sai2_sleep: sai2grp-sleep { + pinctrl_sai2_sleep: sai2-sleep-grp { fsl,pins = < MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000 MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000 @@ -382,7 +381,7 @@ >; }; - pinctrl_uart2_4wires: uart2grp-4wires { + pinctrl_uart2_4wires: uart2-4wires-grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 @@ -391,7 +390,7 @@ >; }; - pinctrl_uart3_2wires: uart3grp-2wires { + pinctrl_uart3_2wires: uart3-2wires-grp { fsl,pins = < MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi index 4a03ea6d24dc..9cc3eebb6b05 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi @@ -232,7 +232,7 @@ >; }; - pinctrl_usdhc1_sleep: usdhc1grp-sleep { + pinctrl_usdhc1_sleep: usdhc1-sleep-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000 MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000 @@ -250,7 +250,7 @@ >; }; - pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep { + pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-sleep-grp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000 MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts index 2ca18f3dad0a..2a6bb5ff808a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts @@ -21,7 +21,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm8 0 100000>; + pwms = <&pwm8 0 100000 0>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 @@ -194,7 +194,6 @@ }; &pwm8 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; @@ -366,7 +365,7 @@ }; pinctrl_tsc: tscgrp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 @@ -411,7 +410,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -422,7 +421,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi index af337f18a266..be3cacb4fa7a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi @@ -9,7 +9,7 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 191000>; + pwms = <&pwm3 0 191000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_5v>; @@ -143,7 +143,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi index 14fc4828ba4e..4c09bb312696 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi @@ -20,7 +20,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm8 0 100000>; + pwms = <&pwm8 0 100000 0>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 @@ -187,7 +187,6 @@ }; &pwm8 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; @@ -323,7 +322,7 @@ >; }; - pinctrl_stmpe: stmpegrp { + pinctrl_stmpe: stmpegrp { fsl,pins = < MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 >; @@ -347,7 +346,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -358,7 +357,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts index 0c643706a158..4e8191a65211 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts @@ -14,7 +14,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm7 0 5000000>; + pwms = <&pwm7 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; @@ -41,7 +41,6 @@ }; &pwm7 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi index 33d5f27285a4..29d2f86d5e34 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi @@ -35,7 +35,7 @@ pwm-beeper { compatible = "pwm-beeper"; - pwms = <&pwm8 0 5000>; + pwms = <&pwm8 0 5000 0>; }; reg_3v3: regulator-3v3 { @@ -152,7 +152,6 @@ }; &pwm8 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; @@ -352,7 +351,7 @@ >; }; - pinctrl_usbotg1: usbotg1 { + pinctrl_usbotg1: usbotg1grp { fsl,pins = < MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts index 1d863a16bcf0..5e62272acfba 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts @@ -100,7 +100,7 @@ >; }; - pinctrl_usb_otg1_vbus: usb-otg1-vbus { + pinctrl_usb_otg1_vbus: usb-otg1-vbus-grp { fsl,pins = < MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x79 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi index 04477fd4b9a9..4a45fb784ff7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi @@ -31,7 +31,7 @@ >; }; - pinctrl_uart2_bt: uart2grp-bt { + pinctrl_uart2_bt: uart2-bt-grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059 @@ -40,7 +40,7 @@ >; }; - pinctrl_usdhc2_wl: usdhc2grp-wl { + pinctrl_usdhc2_wl: usdhc2-wl-grp { fsl,pins = < MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051 MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi index 38ea4dcfa228..bef5eb38a90d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi @@ -219,7 +219,7 @@ >; }; - pinctrl_flexcan1: flexcan1 { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 @@ -275,7 +275,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -286,7 +286,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi index 07dcecbe485d..fe307f49b9e5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi @@ -22,7 +22,7 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; @@ -177,7 +177,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi index 57e647fc3237..2dd635a615cb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi @@ -162,13 +162,18 @@ status = "okay"; flash0: flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; + reg = <0>; spi-max-frequency = <33000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; - reg = <0>; + vcc-supply = <®_vldo4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; @@ -202,7 +207,7 @@ >; }; - pinctrl_pmic: pmic { + pinctrl_pmic: pmicgrp { fsl,pins = < /* PMIC irq */ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts index f2a5f17f312e..2e7b96e7b791 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts @@ -6,8 +6,9 @@ /dts-v1/; -#include "imx6ul-tqma6ul1.dtsi" +#include "imx6ul-tqma6ul2.dtsi" #include "mba6ulx.dtsi" +#include "imx6ul-tqma6ul1.dtsi" / { model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi index 24192d012ef7..79c8c5529135 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi @@ -4,8 +4,6 @@ * Author: Markus Niebel <Markus.Niebel@tq-group.com> */ -#include "imx6ul-tqma6ul2.dtsi" - / { model = "TQ-Systems TQMa6UL1 SoM"; compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts index ef76ece21010..20c810a81403 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts @@ -198,7 +198,7 @@ >; }; - pinctrl_disp0_3: disp0grp-3 { + pinctrl_disp0_3: disp0-3-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index 1db146ac1c17..278120404d31 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -405,7 +405,7 @@ status = "okay"; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -421,7 +421,7 @@ pixelclk-active = <1>; }; - ETV570 { + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -437,7 +437,7 @@ pixelclk-active = <1>; }; - ET0350 { + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -453,7 +453,7 @@ pixelclk-active = <1>; }; - ET0430 { + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -469,7 +469,7 @@ pixelclk-active = <0>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -485,7 +485,7 @@ pixelclk-active = <1>; }; - ET0700 { /* same as ET0500 */ + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -501,7 +501,7 @@ pixelclk-active = <1>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; @@ -578,19 +578,13 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_hog: hoggrp { - }; - pinctrl_led: ledgrp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0b0b0 /* LED */ >; }; - pinctrl_disp0_1: disp0grp-1 { + pinctrl_disp0_1: disp0-1-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ @@ -623,7 +617,7 @@ >; }; - pinctrl_disp0_2: disp0grp-2 { + pinctrl_disp0_2: disp0-2-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ @@ -713,25 +707,25 @@ >; }; - pinctrl_etnphy0_int: etnphy-intgrp-0 { + pinctrl_etnphy0_int: etnphy-int-0-grp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* ETN PHY INT */ >; }; - pinctrl_etnphy0_rst: etnphy-rstgrp-0 { + pinctrl_etnphy0_rst: etnphy-rst-0-grp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 /* ETN PHY RESET */ >; }; - pinctrl_etnphy1_int: etnphy-intgrp-1 { + pinctrl_etnphy1_int: etnphy-int-1-grp { fsl,pins = < MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x0b0b0 /* ETN PHY INT */ >; }; - pinctrl_etnphy1_rst: etnphy-rstgrp-1 { + pinctrl_etnphy1_rst: etnphy-rst-1-grp { fsl,pins = < MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0b0b0 /* ETN PHY RESET */ >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts new file mode 100644 index 000000000000..9ff3b374a2b3 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL + * Variscite SoM mounted on it + * + * Copyright 2019 Variscite Ltd. + * Copyright 2025 Bootlin + */ + +#include "imx6ul-var-som.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Variscite VAR-SOM-MX6UL Concerto Board"; + compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>; + + key-back { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + key-wakeup { + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "gpled2"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&fec1 { + status = "disabled"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + clocks = <&rmii_ref_clk>; + clock-names = "rmii-ref"; + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + micrel,led-mode = <0>; + micrel,rmii-reference-clock-select-25-mhz = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + rtc@68 { + /* + * To actually use this interrupt + * connect pins J14.8 & J14.10 on the Concerto-Board. + */ + compatible = "dallas,ds1337"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_enet2_gpio: enet2-gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* fec2 reset */ + >; + }; + + pinctrl_enet2_mdio: enet2-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_gpio_key_back: gpio-key-backgrp { + fsl,pins = < + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x17059 + >; + }; + + pinctrl_gpio_leds: gpio-ledsgrp { + fsl,pins = < + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x1b0b0 /* GPLED2 */ + >; + }; + + pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x1b0b0 /* RTC alarm IRQ */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1-gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x1b0b1 /* CD */ + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x78b0 + >; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&tsc { + /* + * Conflics with wdog1 ext-reset-output & SD CD pins, + * so we keep it disabled by default. + */ + status = "disabled"; +}; + +/* Console UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* ttymxc4 UART */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + /* + * To actually use ext-reset-output + * connect pins J17.3 & J17.8 on the Concerto-Board + */ + fsl,ext-reset-output; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi new file mode 100644 index 000000000000..4e536e0252de --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite VAR-SOM-MX6UL Module + * + * Copyright 2019 Variscite Ltd. + * Copyright 2025 Bootlin + */ + +/dts-v1/; + +#include "imx6ul.dtsi" +#include <dt-bindings/clock/imx6ul-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Variscite VAR-SOM-MX6UL module"; + compatible = "variscite,var-som-imx6ul", "fsl,imx6ul"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_gpio_dvfs: reg-gpio-dvfs { + compatible = "regulator-gpio"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + regulator-name = "gpio_dvfs"; + regulator-type = "voltage"; + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + states = <1300000 0x1 + 1400000 0x0>; + }; + + rmii_ref_clk: rmii-ref-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "rmii-ref"; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&cpu0 { + dc-supply = <®_gpio_dvfs>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>, <&pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&rmii_ref_clk>; + clock-names = "rmii-ref"; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + micrel,led-mode = <1>; + micrel,rmii-reference-clock-select-25-mhz = <1>; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet1_gpio: enet1-gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* fec1 reset */ + >; + }; + + pinctrl_enet1_mdio: enet1-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT Enable */ + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x03029 /* WLAN Enable */ + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; +}; + +&pxp { + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi index 235aa676618b..6de224dd2bb9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -274,6 +274,8 @@ clocks = <&clks IMX6UL_CLK_UART7_IPG>, <&clks IMX6UL_CLK_UART7_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 43 4 0>, <&sdma 44 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -285,6 +287,8 @@ clocks = <&clks IMX6UL_CLK_UART1_IPG>, <&clks IMX6UL_CLK_UART1_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -296,6 +300,8 @@ clocks = <&clks IMX6UL_CLK_UART8_IPG>, <&clks IMX6UL_CLK_UART8_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 45 4 0>, <&sdma 46 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1075,6 +1081,8 @@ clocks = <&clks IMX6UL_CLK_UART2_IPG>, <&clks IMX6UL_CLK_UART2_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1086,6 +1094,8 @@ clocks = <&clks IMX6UL_CLK_UART3_IPG>, <&clks IMX6UL_CLK_UART3_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1097,6 +1107,8 @@ clocks = <&clks IMX6UL_CLK_UART4_IPG>, <&clks IMX6UL_CLK_UART4_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1108,6 +1120,8 @@ clocks = <&clks IMX6UL_CLK_UART5_IPG>, <&clks IMX6UL_CLK_UART5_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1129,6 +1143,8 @@ clocks = <&clks IMX6UL_CLK_UART6_IPG>, <&clks IMX6UL_CLK_UART6_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi index d03694feaf5c..83b9de17cee2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi @@ -169,7 +169,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -180,7 +180,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 @@ -206,7 +206,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 @@ -221,7 +221,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts new file mode 100644 index 000000000000..cfcd8783c31d --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024 Linumiz + * Author: Parthiban <parthiban@linumiz.com> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-seeed-npi.dtsi" +#include "imx6ull-seeed-npi-dev-board.dtsi" + +/ { + model = "Seeed NPi iMX6ULL Dev Board with NAND"; + compatible = "seeed,imx6ull-seeed-npi-emmc", "seeed,imx6ull-seeed-npi", "fsl,imx6ull"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts new file mode 100644 index 000000000000..87c9434b09c5 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024 Linumiz + * Author: Parthiban <parthiban@linumiz.com> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-seeed-npi.dtsi" +#include "imx6ull-seeed-npi-dev-board.dtsi" + +/ { + model = "Seeed NPi iMX6ULL Dev Board with NAND"; + compatible = "seeed,imx6ull-seeed-npi-nand", "seeed,imx6ull-seeed-npi", "fsl,imx6ull"; +}; + +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi new file mode 100644 index 000000000000..28fddbcdc55e --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024 Linumiz + * Author: Parthiban <parthiban@linumiz.com> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_button>; + + button-0 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + label = "SW2"; + linux,code = <KEY_A>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-blue { + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + label = "LED_B"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led-green { + gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; + label = "LED_G"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led-red { + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + label = "LED_R"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led-user { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + label = "User"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + }; + + reg_5v_sys: regulator-5v-sys { + compatible = "regulator-fixed"; + regulator-name = "5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_5v_sys>; + }; + + reg_3v3_in: regulator-3v3-in { + compatible = "regulator-fixed"; + regulator-name = "3V3_IN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_5v_sys>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_3v3_in>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vmmc>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; +}; + +&csi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csi1>; + status = "disabled"; /* LED Blue & Green shared */ +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&lcdif { + pinctrl-0 = <&pinctrl_lcdif>; + pinctrl-names = "default"; + status = "disabled"; +}; + +®_dcdc_3v3 { + vin-supply = <®_3v3_in>; +}; + +&sai2 { + assigned-clock-rates = <320000000>; + assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>; + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-names = "default"; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_cd>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_button: buttongrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0 + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 + MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 + MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 + MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 + MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 + MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 + MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 + MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 + MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 + MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 + MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_gpio_leds: ledgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x0b0b0 + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x0b0b0 + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + >; + }; + + pinctrl_lcdif: lcdif-grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x79 + >; + }; + + pinctrl_reg_vmmc: usdhc1regvmmc-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 + >; + }; + + pinctrl_sai2: sai2-grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc1_cd: usdhc1cd-grp { + fsl,pins = < + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi new file mode 100644 index 000000000000..278152875f8e --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024 Linumiz + * Author: Parthiban <parthiban@linumiz.com> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Seeed NPi-iMX6ULL Dev Board"; + compatible = "seeed,imx6ull-seeed-npi", "fsl,imx6ull"; + + reg_dcdc_3v3: regulator-dcdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "DCDC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_dram_1v35: regulator-dram-1v35 { + compatible = "regulator-fixed"; + regulator-name = "DRAM_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <®_dcdc_3v3>; + }; + + reg_vdd_arm_soc_in: regulator-vdd-arm-soc-in { + compatible = "regulator-fixed"; + regulator-name = "VDD_ARM_SOC_IN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <®_dcdc_3v3>; + }; + + reg_dcdc_1v8: regulator-dcdc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "DCDC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_dcdc_3v3>; + }; + + reg_sd1_vqmmc: regulator-sd1-vqmmc { + compatible = "regulator-fixed"; + regulator-name = "NVCC_SD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vqmmc>; + regulator-always-on; + vin-supply = <®_dcdc_1v8>; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "disabled"; +}; + +&usdhc1 { + vqmmc-supply = <®_sd1_vqmmc>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + status = "disabled"; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x0b0b1 + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_reg_vqmmc: usdhc1regvqmmcgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts index 67007ce383e3..f9bbd589b66d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts @@ -45,7 +45,7 @@ interrupts = <19 IRQ_TYPE_EDGE_RISING>; spi-cpha; spi-cpol; - spi-max-frequency = <16000000>; + spi-max-frequency = <12000000>; }; }; @@ -63,7 +63,7 @@ interrupts = <9 IRQ_TYPE_EDGE_RISING>; spi-cpha; spi-cpol; - spi-max-frequency = <16000000>; + spi-max-frequency = <12000000>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts index cee223b5f8e1..ef06619d7c86 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts @@ -23,7 +23,7 @@ interrupts = <19 IRQ_TYPE_EDGE_RISING>; spi-cpha; spi-cpol; - spi-max-frequency = <16000000>; + spi-max-frequency = <12000000>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts index 7fd53b7a4372..83db65bf630f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts @@ -45,7 +45,7 @@ interrupts = <19 IRQ_TYPE_EDGE_RISING>; spi-cpha; spi-cpol; - spi-max-frequency = <16000000>; + spi-max-frequency = <12000000>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts new file mode 100644 index 000000000000..e4576d509a5b --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts @@ -0,0 +1,566 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2022-2024 Sebastian Reichel <sre@kernel.org> + +/dts-v1/; +#include "imx6ull.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/clock/imx6ul-clock.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "UNI-T UTi260B Thermal Camera"; + compatible = "uni-t,uti260b", "fsl,imx6ull"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + panel_backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_backlight_enable>; + power-supply = <®_vsd>; + pwms = <&pwm1 0 50000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + /* generic 26650 battery */ + device-chemistry = "lithium-ion"; + charge-full-design-microamp-hours = <5000000>; + voltage-max-design-microvolt = <4200000>; + voltage-min-design-microvolt = <3300000>; + }; + + tp5000: charger { + compatible = "gpio-charger"; + charger-type = "usb-sdp"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_charger_stat1>; + }; + + fuel-gauge { + compatible = "adc-battery"; + charged-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + io-channel-names = "voltage"; + io-channels = <&adc1 7>; + monitored-battery = <&battery>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_charger_stat2>; + power-supplies = <&tp5000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&mux_gpio_keys>; + autorepeat; + + up-key { + label = "Up"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_UP>; + }; + + down-key { + label = "Down"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_DOWN>; + }; + + left-key { + label = "Left"; + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFT>; + }; + + right-key { + label = "Right"; + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RIGHT>; + }; + + ok-key { + label = "Ok"; + gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + }; + + return-key { + label = "Return"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ESC>; + }; + + play-key { + label = "Media"; + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MEDIA>; + }; + + trigger-key { + label = "Trigger"; + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + linux,code = <BTN_TRIGGER>; + }; + + power-key { + label = "Power"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + + light-key { + label = "Light"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LIGHTS_TOGGLE>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&mux_led_ctrl>; + + led { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_FLASH; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_poweroff>; + }; + + reg_vref: regulator-vref-4v2 { + compatible = "regulator-fixed"; + regulator-name = "VREF_4V2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + }; + + reg_vsd: regulator-vsd { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_adc>; + vref-supply = <®_vref>; + status = "okay"; +}; + +&csi { + pinctrl-names = "default"; + pinctrl-0 = <&mux_csi>; + status = "okay"; + + port { + parallel_from_gc0308: endpoint { + remote-endpoint = <&gc0308_to_parallel>; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_spi3>; + status = "okay"; + + panel@0 { + compatible = "inanbo,t28cp45tn89-v17"; + reg = <0>; + backlight = <&panel_backlight>; + power-supply = <®_vsd>; + spi-cpha; + spi-cpol; + spi-max-frequency = <1000000>; + spi-rx-bus-width = <0>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&gpio1 { + ir-reset-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + line-name = "ir-reset-gpio"; + output-low; + pinctrl-names = "default"; + pinctrl-0 = <&mux_ir_reset>; + }; +}; + +&gpio2 { + /* configuring this to output-high results in poweroff */ + power-en-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + line-name = "power-en-gpio"; + output-low; + pinctrl-names = "default"; + pinctrl-0 = <&mux_poweroff2>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_i2c1>; + status = "okay"; + + camera@21 { + compatible = "galaxycore,gc0308"; + reg = <0x21>; + clocks = <&clks IMX6UL_CLK_CSI>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_gc0308>; + powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + vdd28-supply = <®_vsd>; + + port { + gc0308_to_parallel: endpoint { + remote-endpoint = <¶llel_from_gc0308>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <1>; /* active high */ + vsync-active = <1>; /* active high */ + data-active = <1>; /* active high */ + pclk-sample = <1>; /* sample on rising edge */ + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_i2c2>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lcdif { + assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; + pinctrl-names = "default"; + pinctrl-0 = <&mux_lcd_data>, <&mux_lcd_ctrl>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&mux_pwm>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&mux_uart>; + status = "okay"; +}; + +&usbotg1 { + /* USB-C connector */ + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + /* thermal sensor */ + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + +&usdhc1 { + /* MicroSD */ + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + no-1-8-v; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&mux_sdhc1>, <&mux_sdhc1_cd>; + pinctrl-1 = <&mux_sdhc1_100mhz>, <&mux_sdhc1_cd>; + pinctrl-2 = <&mux_sdhc1_200mhz>, <&mux_sdhc1_cd>; + wakeup-source; + vmmc-supply = <®_vsd>; + status = "okay"; +}; + +&usdhc2 { + /* eMMC */ + keep-power-in-suspend; + no-1-8-v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&mux_sdhc2>; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&mux_wdog>; +}; + +&iomuxc { + mux_adc: adcgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0xb0 + >; + }; + + mux_backlight_enable: blenablegrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3008 + >; + }; + + mux_charger_stat1: charger1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3008 + >; + }; + + mux_charger_stat2: charger2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x3008 + >; + }; + + mux_csi: csi1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 + MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 + MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 + MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 + MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 + MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 + MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 + MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 + MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 + MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 + MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 + >; + }; + + mux_gc0308: gc0308grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1e038 + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b088 + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x1b088 + >; + }; + + mux_gpio_keys: gpiokeygrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x3008 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x3008 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x3008 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x3008 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x3008 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x3008 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x3008 + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x3008 + MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x3008 + MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x3008 + >; + }; + + mux_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + mux_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8a8 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8a8 + >; + }; + + mux_ir_reset: irresetgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x3008 + >; + }; + + mux_lcd_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + mux_lcd_data: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + mux_led_ctrl: ledctrlgrp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x3008 + >; + }; + + mux_poweroff: poweroffgrp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x3008 + >; + }; + + mux_poweroff2: poweroff2grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x3008 + >; + }; + + mux_pwm: pwm1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 + >; + }; + + mux_sdhc1: sdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + mux_sdhc1_100mhz: sdhc1-100mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + mux_sdhc1_200mhz: sdhc1-200mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + mux_sdhc1_cd: sdhc1-cd-grp { + fsl,pins = < + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + mux_sdhc2: sdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + mux_spi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1 + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x3008 + >; + }; + + mux_uart: uartgrp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + mux_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi index 8a1776067ecc..db0c339022ac 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi @@ -88,6 +88,8 @@ clocks = <&clks IMX6UL_CLK_UART8_IPG>, <&clks IMX6UL_CLK_UART8_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 45 4 0>, <&sdma 46 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts index c92e4e2f6ab9..6159ed70d966 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts @@ -94,7 +94,7 @@ }; &iomuxc { - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi index 9fe51884af79..8666dcd7fe97 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi @@ -120,7 +120,7 @@ simple-audio-card,bitclock-master = <&dailink_master>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,name = "colibri-imx7"; simple-audio-card,cpu { sound-dai = <&sai1>; @@ -903,7 +903,7 @@ >; }; - pinctrl_lvds_transceiver: lvdstx { + pinctrl_lvds_transceiver: lvdstxgrp { fsl,pins = < MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi index 52869e68f833..4d948a9757f9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi @@ -81,32 +81,10 @@ }; }; - reg_sd1_vmmc: regulator-sd1-vmmc { - compatible = "regulator-fixed"; - regulator-name = "VCC3V3_SD1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_fec1_pwdn: regulator-fec1-pwdn { - compatible = "regulator-fixed"; - regulator-name = "PWDN_FEC1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_fec2_pwdn: regulator-fec2-pwdn { - compatible = "regulator-fixed"; - regulator-name = "PWDN_FEC2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc2 0>, <&adc2 1>, <&adc2 2>, <&adc2 3>; }; reg_usb_otg1_vbus: regulator-usb-otg1-vbus { @@ -135,6 +113,7 @@ gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; + vin-supply = <®_mba_5v>; }; reg_mpcie_3v3: regulator-mpcie-3v3 { @@ -145,6 +124,7 @@ gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; + vin-supply = <®_mba_3v3>; }; reg_mba_12v0: regulator-mba-12v0 { @@ -156,13 +136,18 @@ enable-active-high; }; - reg_lvds_transmitter: regulator-lvds-transmitter { + reg_mba_5v: regulator-mba-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_mba_3v3: regulator-mba-3v3 { compatible = "regulator-fixed"; - regulator-name = "#SHTDN_LVDS"; + regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>; - enable-active-high; }; reg_vref_1v8: regulator-vref-1v8 { @@ -180,19 +165,12 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - }; - - reg_vcc_3v3: regulator-vcc-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + vin-supply = <®_mba_3v3>; }; sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&sai1>; audio-codec = <&tlv320aic32x4>; audio-routing = @@ -233,7 +211,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rgmii-id"; - phy-supply = <®_fec1_pwdn>; phy-handle = <ðphy1_0>; fsl,magic-packet; status = "okay"; @@ -254,6 +231,8 @@ reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; reset-deassert-us = <500>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -310,9 +289,9 @@ &i2c1 { lm75: temperature-sensor@49 { - compatible = "national,lm75"; + compatible = "national,lm75a"; reg = <0x49>; - vs-supply = <®_vcc_3v3>; + vs-supply = <®_mba_3v3>; }; }; @@ -345,7 +324,7 @@ interrupts = <12 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; - vcc-supply = <®_vcc_3v3>; + vcc-supply = <®_mba_3v3>; }; }; @@ -662,7 +641,7 @@ pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - vmmc-supply = <®_sd1_vmmc>; + vmmc-supply = <®_mba_3v3>; bus-width = <4>; no-1-8-v; no-sdio; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index 028961eb7108..2966a33bc528 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi @@ -135,6 +135,7 @@ lm75a: temperature-sensor@48 { compatible = "national,lm75a"; reg = <0x48>; + vs-supply = <&vgen4_reg>; }; /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */ @@ -150,7 +151,6 @@ reg = <0x50>; pagesize = <32>; vcc-supply = <&vgen4_reg>; - status = "okay"; }; at24c02: eeprom@56 { @@ -158,7 +158,6 @@ reg = <0x56>; pagesize = <16>; vcc-supply = <&vgen4_reg>; - status = "okay"; }; ds1339: rtc@68 { @@ -266,6 +265,13 @@ spi-max-frequency = <29000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <&vgen4_reg>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts index 0443faa3dfae..e3ee16f1aaa9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts @@ -21,7 +21,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii-id"; - phy-supply = <®_fec2_pwdn>; phy-handle = <ðphy2_0>; fsl,magic-packet; status = "okay"; @@ -42,6 +41,8 @@ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; reset-deassert-us = <500>; + interrupt-parent = <&gpio2>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts index 9c6476bda4a0..7ee66be8bccb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts @@ -419,7 +419,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>; - pinctrl_hog_1: hoggrp-1 { + pinctrl_hog_1: hoggrp { fsl,pins = < MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d @@ -665,7 +665,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog_2>; - pinctrl_hog_2: hoggrp-2 { + pinctrl_hog_2: hoggrp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi index 8d5037ac03c7..a1574ccec89c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi @@ -444,14 +444,14 @@ >; }; - pinctrl_can1: can1frp { + pinctrl_can1: can1frpgrp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59 MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59 >; }; - pinctrl_can2: can2frp { + pinctrl_can2: can2frpgrp { fsl,pins = < MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59 MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59 @@ -499,19 +499,19 @@ >; }; - pinctrl_pwm1: pwm1 { + pinctrl_pwm1: pwm1grp { fsl,pins = < MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f >; }; - pinctrl_pwm2: pwm2 { + pinctrl_pwm2: pwm2grp { fsl,pins = < MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f >; }; - pinctrl_pwm3: pwm3 { + pinctrl_pwm3: pwm3grp { fsl,pins = < MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f >; @@ -563,7 +563,7 @@ >; }; - pinctrl_usbotg1_pwr: usbotg_pwr { + pinctrl_usbotg1_pwr: usbotgpwrgrp { fsl,pins = < MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 >; @@ -581,7 +581,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x5a MX7D_PAD_SD1_CLK__SD1_CLK 0x1a @@ -593,7 +593,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x5b MX7D_PAD_SD1_CLK__SD1_CLK 0x1b @@ -631,7 +631,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a @@ -646,7 +646,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts index 92cb45dacda6..eec526a96311 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts @@ -508,7 +508,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x5a MX7D_PAD_SD2_CLK__SD2_CLK 0x1a @@ -519,7 +519,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x5b MX7D_PAD_SD2_CLK__SD2_CLK 0x1b @@ -546,7 +546,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a @@ -562,7 +562,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts index cabdaa6dc518..40156cd9195f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts @@ -21,23 +21,21 @@ }; &iomuxc { - imx7d-sdb { - pinctrl_tsc2046_pendown: tsc2046_pendown { - fsl,pins = < - MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59 - >; - }; - - pinctrl_hog: hoggrp { - fsl,pins = < - MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ - >; - }; - - pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp { - fsl,pins = < - MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 - >; - }; + pinctrl_tsc2046_pendown: tsc2046-pendowngrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + >; + }; + + pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts index 0462e43ec09b..17236f90ab33 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts @@ -143,6 +143,33 @@ gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; }; + reg_audio_5v: regulator-audio-pwr { + compatible = "regulator-fixed"; + regulator-name = "audio-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_1v8: regulator-audio-1v8 { + compatible = "regulator-fixed"; + regulator-name = "audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; @@ -169,7 +196,7 @@ model = "wm8960-audio"; audio-cpu = <&sai1>; audio-codec = <&codec>; - hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>; + hp-det-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; audio-routing = "Headphone Jack", "HP_L", "Headphone Jack", "HP_R", @@ -406,6 +433,11 @@ <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; assigned-clock-rates = <0>, <884736000>, <12288000>; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; }; }; @@ -537,342 +569,340 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx7d-sdb { - pinctrl_brcm_reg: brcmreggrp { - fsl,pins = < - MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14 - >; - }; + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14 + >; + }; - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 - MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2 - MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2 - MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59 - >; - }; + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 + MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2 + MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2 + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59 + >; + }; - pinctrl_enet1: enet1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 - MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - >; - }; + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; - pinctrl_enet2: enet2grp { - fsl,pins = < - MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 - MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 - MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 - MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 - MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 - MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 - MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 - MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 - MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 - MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 - MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 - MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 - >; - }; + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + >; + }; - pinctrl_enet2_reg: enet2reggrp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14 - >; - }; + pinctrl_enet2_reg: enet2reggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14 + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 - MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; - pinctrl_flexcan2_reg: flexcan2reggrp { - fsl,pins = < - MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */ - >; - }; + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */ + >; + }; - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59 - MX7D_PAD_SD2_WP__GPIO5_IO10 0x59 - >; - }; + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59 + MX7D_PAD_SD2_WP__GPIO5_IO10 0x59 + >; + }; - pinctrl_hog: hoggrp { - fsl,pins = < - MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f - MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f - MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f - MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f - MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f - >; - }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 - MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 - MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 - MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 - MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 - MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 - MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 - MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 - MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 - MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 - MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 - MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 - MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 - MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 - MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 - MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 - MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 - MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 - MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 - MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 - MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 - MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 - MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 - MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 - MX7D_PAD_LCD_CLK__LCD_CLK 0x79 - MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 - MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 - MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 - MX7D_PAD_LCD_RESET__LCD_RESET 0x79 - >; - }; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; - pinctrl_sai1: sai1grp { - fsl,pins = < - MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f - MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 - MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f - >; - }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; - pinctrl_sai2: sai2grp { - fsl,pins = < - MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f - MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f - MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 - MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f - >; - }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f + >; + }; - pinctrl_sai3: sai3grp { - fsl,pins = < - MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f - MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f - MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 - >; - }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; - pinctrl_spi4: spi4grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 - MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 - MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 - >; - }; + pinctrl_spi4: spi4grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 + >; + }; - pinctrl_tsc2046_pendown: tsc2046_pendown { - fsl,pins = < - MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 - >; - }; + pinctrl_tsc2046_pendown: tsc2046-pendowngrp { + fsl,pins = < + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 - MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79 - MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79 - MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79 - MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79 + MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79 + MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79 + MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79 + >; + }; - pinctrl_uart6: uart6grp { - fsl,pins = < - MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 - MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 - MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 - MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 - >; - }; + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 + MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 + MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 + MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 + >; + }; - pinctrl_usdhc1_gpio: usdhc1_gpiogrp { - fsl,pins = < - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ - MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ - >; - }; + pinctrl_usdhc1_gpio: usdhc1-gpiogrp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x59 - MX7D_PAD_SD1_CLK__SD1_CLK 0x19 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5a - MX7D_PAD_SD1_CLK__SD1_CLK 0x1a - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a - >; - }; + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5b - MX7D_PAD_SD1_CLK__SD1_CLK 0x1b - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b - >; - }; + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX7D_PAD_SD2_CMD__SD2_CMD 0x59 - MX7D_PAD_SD2_CLK__SD2_CLK 0x19 - MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 - MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 - MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 - MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + >; + }; - pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { - fsl,pins = < - MX7D_PAD_SD2_CMD__SD2_CMD 0x5a - MX7D_PAD_SD2_CLK__SD2_CLK 0x1a - MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a - MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a - MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a - MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a - >; - }; + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a + >; + }; - pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { - fsl,pins = < - MX7D_PAD_SD2_CMD__SD2_CMD 0x5b - MX7D_PAD_SD2_CLK__SD2_CLK 0x1b - MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b - MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b - MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b - MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b - >; - }; + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x59 - MX7D_PAD_SD3_CLK__SD3_CLK 0x19 - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5a - MX7D_PAD_SD3_CLK__SD3_CLK 0x1a - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a - >; - }; + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5b - MX7D_PAD_SD3_CLK__SD3_CLK 0x1b - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b - >; - }; + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; }; }; @@ -901,7 +931,7 @@ >; }; - pinctrl_sai3_mclk: sai3grp_mclk { + pinctrl_sai3_mclk: sai3-mclk-grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f >; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts index 521493342fe9..8f5566027c25 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts @@ -350,7 +350,7 @@ &iomuxc_lpsr { pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp { - fsl,phy = < + fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08 >; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index 7bab113ca6da..af4acc311572 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -459,7 +459,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a @@ -475,7 +475,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 9c81c6baa2d3..2629968001a7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -176,6 +176,34 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; + video_mux: csi-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + csi_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_csi_mux>; + }; + }; + + port@2 { + reg = <2>; + + csi_mux_to_csi: endpoint { + remote-endpoint = <&csi_from_csi_mux>; + }; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -529,34 +557,6 @@ #mux-control-cells = <1>; mux-reg-masks = <0x14 0x00000010>; }; - - video_mux: csi-mux { - compatible = "video-mux"; - mux-controls = <&mux 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - - csi_mux_from_mipi_vc0: endpoint { - remote-endpoint = <&mipi_vc0_to_csi_mux>; - }; - }; - - port@2 { - reg = <2>; - - csi_mux_to_csi: endpoint { - remote-endpoint = <&csi_from_csi_mux>; - }; - }; - }; }; ocotp: efuse@30350000 { @@ -636,6 +636,15 @@ clock-names = "snvs-rtc"; }; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + value = <0x60>; + mask = <0x60>; + status = "disabled"; + }; + snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi index ac338320ac1d..3c6ef7bfba60 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi @@ -214,10 +214,11 @@ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; #phy-cells = <0>; + nxp,sim = <&sim>; }; usdhc0: mmc@40370000 { - compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + compatible = "fsl,imx7ulp-usdhc"; reg = <0x40370000 0x10000>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, @@ -231,7 +232,7 @@ }; usdhc1: mmc@40380000 { - compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + compatible = "fsl,imx7ulp-usdhc"; reg = <0x40380000 0x10000>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi index dd714d235d5f..b0bad0d1ba36 100644 --- a/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi @@ -87,7 +87,7 @@ reg = <0x402c0000 0x4000>; interrupts = <110>; clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, - <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_AHB_PODF>, <&clks IMXRT1050_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index e78d0a7d8cd2..67a3d484bc9f 100644 --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi @@ -142,7 +142,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&sai1>; audio-codec = <&tlv320aic32x4>; audio-asrc = <&asrc>; @@ -505,7 +505,7 @@ >; }; - pinctrl_uart6dte: uart6dte { + pinctrl_uart6dte: uart6dtegrp { fsl,pins = < MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 @@ -537,7 +537,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 @@ -552,7 +552,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts index 224f80a4a31d..4aefbc01dfc0 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts @@ -482,8 +482,8 @@ reg = <0x1d>; }; - lm75@48 { - compatible = "nxp,lm75"; + temperature-sensor@48 { + compatible = "national,lm75b"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts index 1f84654df50c..846afb8ccbf1 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts @@ -511,7 +511,7 @@ clock-frequency = <400000>; sensor@49 { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x49>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile index a430d04f9c69..96dd31ea19ba 100644 --- a/arch/arm/boot/dts/nxp/mxs/Makefile +++ b/arch/arm/boot/dts/nxp/mxs/Makefile @@ -8,6 +8,9 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-apf28.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ + imx28-btt3-0.dtb \ + imx28-btt3-1.dtb \ + imx28-btt3-2.dtb \ imx28-cfa10036.dtb \ imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts index 7365fe4581a3..33b36af1656f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts @@ -52,7 +52,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; @@ -99,7 +99,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { lradc@80050000 { status = "okay"; fsl,lradc-touchscreen-wires = <4>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts index 229e727b222e..e372e9327a47 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts @@ -19,7 +19,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -64,7 +64,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { lradc@80050000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts index b23e7ada9c80..cb661bf2d157 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts @@ -55,7 +55,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -100,7 +100,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { pwm: pwm@80064000 { pinctrl-names = "default"; pinctrl-0 = <&pwm2_pins_a>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts index 69124ba6a666..b2b6f8514999 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts @@ -16,7 +16,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -44,7 +44,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { auart0: serial@8006c000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts index 28341d8315c2..0b088c8ab6b6 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts @@ -54,7 +54,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -101,7 +101,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { i2c: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c_pins_a>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi index 0309592af1e1..5e21252fb7c9 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi @@ -45,7 +45,7 @@ reg = <0x80000000 0x80000>; ranges; - apbh@80000000 { + apbh-bus@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -476,7 +476,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts index f9bf40d96568..0d845ca81e89 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts @@ -11,19 +11,13 @@ reg = <0x40000000 0x04000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -122,7 +116,7 @@ }; pcf8563: rtc@51 { - compatible = "phg,pcf8563"; + compatible = "nxp,pcf8563"; reg = <0x51>; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts new file mode 100644 index 000000000000..6ac46e4b21bb --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-btt3.dtsi" + +&hog_pins_rev { + fsl,pull-up = <MXS_PULL_ENABLE>; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts new file mode 100644 index 000000000000..213fe931c58b --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-btt3.dtsi" diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts new file mode 100644 index 000000000000..4bccd784d065 --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-btt3.dtsi" + +/ { + panel { + compatible = "powertip,st7272", "panel-dpi"; + power-supply = <®_3v3>; + width-mm = <70>; + height-mm = <52>; + + panel-timing { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hfront-porch = <20>; + hback-porch = <68>; + hsync-len = <30>; + vfront-porch = <4>; + vback-porch = <14>; + vsync-len = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi new file mode 100644 index 000000000000..2c52e67e5c14 --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ +/dts-v1/; +#include "imx28-lwe.dtsi" + +/ { + model = "BTT3"; + + compatible = "lwn,imx28-btt3", "fsl,imx28"; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1 quiet"; + }; + + memory@40000000 { + reg = <0x40000000 0x10000000>; + device_type = "memory"; + }; + + panel { + compatible = "powertip,hx8238a", "panel-dpi"; + power-supply = <®_3v3>; + width-mm = <70>; + height-mm = <52>; + + panel-timing { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hfront-porch = <20>; + hback-porch = <38>; + hsync-len = <30>; + vfront-porch = <4>; + vback-porch = <14>; + vsync-len = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <1>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "BTTC Audio"; + simple-audio-card,widgets = "Speaker", "BTTC Speaker"; + simple-audio-card,routing = "BTTC Speaker", "SPKOUTN", "BTTC Speaker", "SPKOUTP"; + + simple-audio-card,dai-link@0 { + format = "left_j"; + bitclock-master = <&dai0_master>; + frame-master = <&dai0_master>; + mclk-fs = <256>; + + dai0_master: cpu { + sound-dai = <&saif0>; + }; + + codec { + sound-dai = <&wm89xx>; + clocks = <&saif0>; + }; + }; + }; + + wifi_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_pin_bttc>; + reset-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + /* W1-163 needs 60us for WL_EN to be low and */ + /* 150ms after high before downloading FW is possible */ + post-power-on-delay-ms = <200>; + power-off-delay-us = <100>; + }; +}; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&i2c0 { + wm89xx: audio-codec@1a { + compatible = "wlf,wm8940"; + reg = <0x1a>; + #sound-dai-cells = <0>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a>, <&lcdif_sync_pins_bttc>, + <&lcdif_reset_pins_bttc>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&mac0 { + clocks = <&clks 57>, <&clks 57>, <&clks 64>; + clock-names = "ipg", "ahb", "enet_out"; + phy-handle = <&mac0_phy>; + phy-mode = "rmii"; + phy-supply = <®_3v3>; + /* + * This MAC address is adjusted during production. + * Value specified below is used as a fallback during recovery. + */ + local-mac-address = [ 00 11 B8 00 BF 8A ]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mac0_phy: ethernet-phy@0 { + /* LAN8720Ai - PHY ID */ + compatible = "ethernet-phy-id0007.c0f0","ethernet-phy-ieee802.3-c22"; + reg = <0>; + smsc,disable-energy-detect; + max-speed = <100>; + reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>, <&hog_pins_rev>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY2__GPIO_0_22 + MX28_PAD_GPMI_RDY3__GPIO_0_23 + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_LCD_VSYNC__GPIO_1_28 + MX28_PAD_SSP2_SS1__GPIO_2_20 + MX28_PAD_SSP2_SS2__GPIO_2_21 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_GPMI_WRN__GPIO_0_25 + MX28_PAD_ENET0_RXD2__GPIO_4_9 + MX28_PAD_ENET0_TXD2__GPIO_4_11 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_rev: hog@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_ENET0_RXD3__GPIO_4_10 + MX28_PAD_ENET0_TX_CLK__GPIO_4_5 + MX28_PAD_ENET0_COL__GPIO_4_14 + MX28_PAD_ENET0_CRS__GPIO_4_15 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + keypad_pins_bttc: keypad-bttc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_AUART0_RTS__GPIO_3_3 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D04__GPIO_0_4 + MX28_PAD_GPMI_D05__GPIO_0_5 + MX28_PAD_GPMI_D06__GPIO_0_6 + MX28_PAD_GPMI_D07__GPIO_0_7 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_CE2N__GPIO_0_18 + MX28_PAD_GPMI_CE3N__GPIO_0_19 + MX28_PAD_GPMI_RDY0__GPIO_0_20 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_sync_pins_bttc: lcdif-bttc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_RD_E__LCD_VSYNC + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_reset_pins_bttc: lcdif-bttc@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + ssp1_sdio_pins_a: ssp1-sdio@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP1_DATA0__SSP1_D0 + MX28_PAD_GPMI_D01__SSP1_D1 + MX28_PAD_GPMI_D02__SSP1_D2 + MX28_PAD_SSP1_DATA3__SSP1_D3 + MX28_PAD_SSP1_CMD__SSP1_CMD + MX28_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + wifi_en_pin_bttc: wifi-en-pin@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CLE__GPIO_0_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; +}; + +®_usb_5v { + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + #sound-dai-cells = <0>; + assigned-clocks = <&clks 53>; + assigned-clock-rates = <12000000>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + #sound-dai-cells = <0>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp1 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_sdio_pins_a>; + bus-width = <4>; + no-1-8-v; /* force 3.3V VIO */ + non-removable; + vmmc-supply = <®_3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + keep-power-in-suspend; + status = "okay"; + + wlan@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts index c72fe2d392f1..fd177daa6385 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts @@ -14,7 +14,7 @@ compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { pinctrl@80018000 { usb_pins_cfa10037: usb-10037@0 { reg = <0>; @@ -38,7 +38,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { usbphy1: usbphy@8007e000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi index 69fcb0dde940..410dfe17f8ca 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi @@ -55,23 +55,6 @@ status = "okay"; }; -&saif0 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - #sound-dai-cells = <0>; - assigned-clocks = <&clks 53>; - assigned-clock-rates = <12000000>; - status = "okay"; -}; - -&saif1 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - #sound-dai-cells = <0>; - status = "okay"; -}; - &spi3_pins_a { fsl,pinmux-ids = < MX28_PAD_AUART2_RX__SSP3_D4 @@ -109,7 +92,7 @@ flash@0 { compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; + spi-max-frequency = <20000000>; reg = <0>; partitions { @@ -133,14 +116,21 @@ reg = <0x90000 0x10000>; }; - partition@100000 { - label = "kernel"; - reg = <0x100000 0x400000>; + partition@a0000 { + label = "rescue"; + reg = <0xa0000 0xf40000>; + }; + + partition@fe0000 { + /* 1st sector for SPL boot img source data */ + label = "spl-boot-data1"; + reg = <0xfe0000 0x10000>; }; - partition@500000 { - label = "swupdate"; - reg = <0x500000 0x800000>; + partition@ff0000 { + /* 2nd sector for SPL boot img source data */ + label = "spl-boot-data2"; + reg = <0xff0000 0x10000>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts index 0f01dded4e3d..ca62e7933116 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts @@ -24,30 +24,25 @@ }; leds { - #address-cells = <1>; - #size-cells = <0>; compatible = "gpio-leds"; status = "okay"; - led@1 { + led-1 { label = "sps1-1:yellow:user"; gpios = <&gpio0 6 0>; linux,default-trigger = "heartbeat"; - reg = <0>; }; - led@2 { + led-2 { label = "sps1-2:red:user"; gpios = <&gpio0 3 0>; linux,default-trigger = "heartbeat"; - reg = <1>; }; - led@3 { + led-3 { label = "sps1-3:red:user"; gpios = <&gpio0 0 0>; - default-trigger = "heartbeat"; - reg = <2>; + linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index 5485fe118dc4..9290635352f1 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -323,7 +323,6 @@ display-timings { native-mode = <&timing5>; timing0: timing0 { - panel-name = "VGA"; clock-frequency = <25175000>; hactive = <640>; vactive = <480>; @@ -340,7 +339,6 @@ }; timing1: timing1 { - panel-name = "ETV570"; clock-frequency = <25175000>; hactive = <640>; vactive = <480>; @@ -357,7 +355,6 @@ }; timing2: timing2 { - panel-name = "ET0350"; clock-frequency = <6500000>; hactive = <320>; vactive = <240>; @@ -374,7 +371,6 @@ }; timing3: timing3 { - panel-name = "ET0430"; clock-frequency = <9000000>; hactive = <480>; vactive = <272>; @@ -391,7 +387,6 @@ }; timing4: timing4 { - panel-name = "ET0500", "ET0700"; clock-frequency = <33260000>; hactive = <800>; vactive = <480>; @@ -408,7 +403,6 @@ }; timing5: timing5 { - panel-name = "ETQ570"; clock-frequency = <6400000>; hactive = <320>; vactive = <240>; @@ -621,13 +615,13 @@ &saif0 { pinctrl-names = "default"; pinctrl-0 = <&saif0_pins_b>; - fsl,saif-master; status = "okay"; }; &saif1 { pinctrl-names = "default"; pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index 4817fba2d938..bbea8b77386f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -56,7 +56,7 @@ reg = <0x80000000 0x80000>; ranges; - apbh@80000000 { + apbh-bus@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1092,7 +1092,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts index 722182f5fd17..2492fb99956c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts @@ -119,7 +119,7 @@ status = "okay"; spidev0@0 { - compatible = "lwn,bk4"; + compatible = "lwn,bk4-spi"; spi-max-frequency = <30000000>; reg = <0>; fsl,spi-cs-sck-delay = <200>; @@ -136,7 +136,7 @@ #address-cells = <0>; slave { - compatible = "lwn,bk4"; + compatible = "lwn,bk4-spi"; spi-max-frequency = <30000000>; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi index 607cec2df861..20aed3946214 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi @@ -8,7 +8,6 @@ / { model = "Toradex Colibri VF61 COM"; - compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts index 6f9878f124c4..4f99044837f8 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts @@ -392,7 +392,7 @@ }; &gpio0 { - eth0_intrp { + eth0-intrp-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; input; @@ -401,7 +401,7 @@ }; &gpio3 { - eth0_intrp { + eth0-intrp-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi index acccf9a3c898..597f20be82f1 100644 --- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi @@ -158,8 +158,8 @@ clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <6>; - dmas = <&edma1 1 12>, <&edma1 1 13>; - dma-names = "rx", "tx"; + dmas = <&edma1 1 13>, <&edma1 1 12>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -172,8 +172,8 @@ clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; spi-num-chipselects = <4>; - dmas = <&edma1 1 14>, <&edma1 1 15>; - dma-names = "rx", "tx"; + dmas = <&edma1 1 15>, <&edma1 1 14>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -529,9 +529,8 @@ clocks = <&clks VF610_CLK_DSPI2>; clock-names = "dspi"; spi-num-chipselects = <2>; - dmas = <&edma1 0 10>, - <&edma1 0 11>; - dma-names = "rx", "tx"; + dmas = <&edma1 0 11>, <&edma1 0 10>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -544,8 +543,8 @@ clocks = <&clks VF610_CLK_DSPI3>; clock-names = "dspi"; spi-num-chipselects = <2>; - dmas = <&edma1 0 12>, <&edma1 0 13>; - dma-names = "rx", "tx"; + dmas = <&edma1 0 13>, <&edma1 0 12>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -725,13 +724,13 @@ clocks = <&clks VF610_CLK_CAAM>; clock-names = "ipg"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 6478a39b3be5..f06c6d425e91 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -1,10 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += \ + msm8226-motorola-falcon.dtb \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8026-samsung-matisse-wifi.dtb \ + qcom-apq8026-samsung-milletwifi.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -26,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8226-microsoft-dempsey.dtb \ qcom-msm8226-microsoft-makepeace.dtb \ qcom-msm8226-microsoft-moneypenny.dtb \ + qcom-msm8226-samsung-ms013g.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-e5.dtb \ @@ -40,12 +43,17 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ + qcom-msm8974-samsung-hlte.dtb \ qcom-msm8974-sony-xperia-rhine-amami.dtb \ qcom-msm8974-sony-xperia-rhine-honami.dtb \ qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-htc-m8.dtb \ qcom-msm8974pro-oneplus-bacon.dtb \ qcom-msm8974pro-samsung-klte.dtb \ + qcom-msm8974pro-samsung-kltechn.dtb \ + qcom-msm8974pro-sony-xperia-shinano-aries.dtb \ qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ + qcom-msm8974pro-sony-xperia-shinano-leo.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ qcom-sdx55-mtp.dtb \ qcom-sdx55-t55.dtb \ diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts new file mode 100644 index 000000000000..5dbca83f2230 --- /dev/null +++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Motorola Moto G (2013)"; + compatible = "motorola,falcon", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + vddio-supply = <&vddio_disp_vreg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + vddio_disp_vreg: regulator-vddio-disp { + compatible = "regulator-fixed"; + regulator-name = "vddio_disp"; + gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>; + vin-supply = <&pm8226_l8>; + startup-delay-us = <300>; + enable-active-high; + regulator-boot-on; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + dhob@f500000 { + reg = <0x0f500000 0x40000>; + no-map; + }; + + shob@f540000 { + reg = <0x0f540000 0x2000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + /* Actually <0x0fa00000 0x500000>, but first 100000 is smem */ + reserved@fb00000 { + reg = <0x0fb00000 0x400000>; + no-map; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_lvs1>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + st,drdy-int-pin = <1>; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + pinctrl-0 = <®_lcd_default>; + pinctrl-names = "default"; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>; + }; + }; + + temperature-sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&temp_alert_default>; + pinctrl-names = "default"; + #thermal-sensor-cells = <0>; + }; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + pm8226_lvs1: lvs1 { + regulator-always-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <2000000>; + qcom,fast-charge-current-limit = <1900000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + reg_lcd_default: reg-lcd-default-state { + pins = "gpio31", "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + reg_vddio_disp_default: reg-vddio-disp-default-state { + pins = "gpio34"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + temp_alert_default: temp-alert-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi index 2985f4805b93..309f5256754b 100644 --- a/arch/arm/boot/dts/qcom/pma8084.dtsi +++ b/arch/arm/boot/dts/qcom/pma8084.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -19,12 +20,17 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8941-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; }; pma8084_gpios: gpio@c000 { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts new file mode 100644 index 000000000000..7d519156d91d --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts @@ -0,0 +1,573 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/power/summit,smb347-charger.h> +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Tab 4 8.0 Wi-Fi"; + compatible = "samsung,milletwifi", "qcom,apq8026"; + chassis-type = "tablet"; + + aliases { + display0 = &framebuffer0; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <800>; + height = <1280>; + stride = <(800 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Cover"; + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-home { + label = "Home"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-backlight { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&backlight_i2c_default_state>; + pinctrl-names = "default"; + + i2c-gpio,delay-us = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + enable-supply = <®_backlight_vddio>; + + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0x3f>; + + /* + * Change transition duration: 200ms, Change + * transition strength: heavy, PWM hysteresis: + * 1-bit w/ 8-bit resolution + */ + rom-a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + + /* + * PWM phase configuration: 3-phase/3 drivers + * (0, 120deg, 240deg, -, -, -), + * PWM frequency: 9616Hz (10-bit) + */ + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x34>; + }; + + /* + * Enable LED drivers 2 & 3, Boot inductor + * current limit: 1.5A/2.6A + */ + rom-a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xfa>; + }; + }; + }; + + reg_backlight_vddio: regulator-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "backlight_vddio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&backlight_vddio_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en1_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default_state>; + pinctrl-names = "default"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + mpss_region: mpss@8400000 { + reg = <0x08400000 0x1f00000>; + no-map; + }; + + mba_region: mba@a300000 { + reg = <0x0a300000 0x100000>; + no-map; + }; + + reserved@cb00000 { + reg = <0x0cb00000 0x700000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x700000>; + no-map; + }; + + adsp_region: adsp@d900000 { + reg = <0x0d900000 0x1800000>; + no-map; + }; + + venus@f100000 { + reg = <0x0f100000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + reserved@fb00000 { + reg = <0x0fb00000 0x260000>; + no-map; + }; + + rfsa@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-0 = <&accel_int_default_state>; + pinctrl-names = "default"; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + st,drdy-int-pin = <1>; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + charger@6a { + compatible = "summit,smb358"; + reg = <0x6a>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&charger_int_default_state>; + pinctrl-names = "default"; + + summit,enable-usb-charging; + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>; + summit,fast-voltage-threshold-microvolt = <3000000>; + summit,chip-temperature-threshold-celsius = <130>; + summit,usb-current-limit-microamp = <1500000>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + muic: usb-switch@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&muic_int_default_state>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "melfas,mms252", "melfas,mms114"; + reg = <0x48>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + avdd-supply = <®_tsp_3p3v>; + vdd-supply = <®_tsp_1p8v>; + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-0 = <&tsp_int_rst_default_state>; + pinctrl-names = "default"; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + regulator-always-on; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + accel_int_default_state: accel-int-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_i2c_default_state: backlight-i2c-default-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_vddio_default_state: backlight-vddio-default-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + charger_int_default_state: charger-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + muic_int_default_state: muic-int-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default_state: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default_state: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default_state: tsp-int-rst-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts index d460743fbb94..947183992850 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts @@ -125,8 +125,6 @@ &gsbi1_i2c { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; eeprom@52 { compatible = "atmel,24c128"; @@ -148,8 +146,6 @@ &gsbi3_i2c { clock-frequency = <200000>; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; status = "okay"; trackpad@10 { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts index 671d58cc2741..178c55c1efeb 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts @@ -188,24 +188,17 @@ }; &tlmm_pinmux { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; + card_detect: card-detect-state { + pins = "gpio26"; + function = "gpio"; + bias-disable; }; - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; + pcie_pins: pcie-state { + pins = "gpio27"; + function = "gpio"; + drive-strength = <12>; + bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts index ed86b24119c9..b3ff8010b149 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts @@ -321,24 +321,17 @@ }; &tlmm_pinmux { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; + card_detect: card-detect-state { + pins = "gpio26"; + function = "gpio"; + bias-disable; }; - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; + pcie_pins: pcie-state { + pins = "gpio27"; + function = "gpio"; + drive-strength = <12>; + bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi index 7c545c50847b..e53de709e9d1 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi @@ -1,318 +1,218 @@ // SPDX-License-Identifier: GPL-2.0 &tlmm_pinmux { - sdc4_gpios: sdc4-gpios { - pios { - pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; - function = "sdc4"; - }; - }; - - sdcc1_pins: sdcc1-pin-active { - clk { + sdcc1_default_state: sdcc1-default-state { + clk-pins { pins = "sdc1_clk"; - drive-strengh = <16>; + drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; - drive-strengh = <10>; + drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc1_data"; - drive-strengh = <10>; + drive-strength = <10>; bias-pull-up; }; }; - sdcc3_pins: sdcc3-pin-active { - clk { + sdcc3_default_state: sdcc3-default-state { + clk-pins { pins = "sdc3_clk"; - drive-strengh = <8>; + drive-strength = <8>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc3_cmd"; - drive-strengh = <8>; + drive-strength = <8>; bias-pull-up; }; - data { + data-pins { pins = "sdc3_data"; - drive-strengh = <8>; + drive-strength = <8>; bias-pull-up; }; }; - ps_hold: ps_hold { - mux { - pins = "gpio78"; - function = "ps_hold"; - }; + sdc4_default_state: sdc4-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; }; - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; + gsbi1_uart_2pins: gsbi1-uart-2pins-state { + pins = "gpio18", "gpio19"; + function = "gsbi1"; + }; - pinconf { - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; + gsbi1_uart_4pins: gsbi1-uart-4pins-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "gsbi1"; }; - i2c1_pins_sleep: i2c1_pins_sleep { - mux { - pins = "gpio20", "gpio21"; - function = "gpio"; - }; - pinconf { - pins = "gpio20", "gpio21"; + gsbi4_uart_pin_a: gsbi4-uart-pin-active-state { + rx-pins { + pins = "gpio11"; + function = "gsbi4"; drive-strength = <2>; bias-disable; }; - }; - gsbi1_uart_2pins: gsbi1_uart_2pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi1"; + tx-pins { + pins = "gpio10"; + function = "gsbi4"; + drive-strength = <4>; + bias-disable; }; }; - gsbi1_uart_4pins: gsbi1_uart_4pins { - mux { - pins = "gpio18", "gpio19", "gpio20", "gpio21"; - function = "gsbi1"; - }; + gsbi6_uart_2pins: gsbi6-uart-2pins-state { + pins = "gpio14", "gpio15"; + function = "gsbi6"; }; - i2c2_pins: i2c2 { - mux { - pins = "gpio24", "gpio25"; - function = "gsbi2"; - }; - - pinconf { - pins = "gpio24", "gpio25"; - drive-strength = <16>; - bias-disable; - }; + gsbi6_uart_4pins: gsbi6-uart-4pins-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; }; - i2c2_pins_sleep: i2c2_pins_sleep { - mux { - pins = "gpio24", "gpio25"; - function = "gpio"; - }; - - pinconf { - pins = "gpio24", "gpio25"; - drive-strength = <2>; - bias-disable; - }; + gsbi7_uart_2pins: gsbi7-uart-2pins-state { + pins = "gpio82", "gpio83"; + function = "gsbi7"; }; - i2c3_pins: i2c3 { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi3"; - }; - - pinconf { - pins = "gpio8", "gpio9"; - drive-strength = <16>; - bias-disable; - }; + gsbi7_uart_4pins: gsbi7_uart_4pins-state { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; }; - i2c3_pins_sleep: i2c3_pins_sleep { - mux { - pins = "gpio8", "gpio9"; - function = "gpio"; - }; - pinconf { - pins = "gpio8", "gpio9"; - drive-strength = <2>; - bias-disable; - }; + i2c1_default_state: i2c1-default-state { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + drive-strength = <16>; + bias-disable; }; - i2c4_pins: i2c4 { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - }; - - pinconf { - pins = "gpio12", "gpio13"; - drive-strength = <16>; - bias-disable; - }; + i2c1_sleep_state: i2c1-sleep-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - i2c4_pins_sleep: i2c4_pins_sleep { - mux { - pins = "gpio12", "gpio13"; - function = "gpio"; - }; - pinconf { - pins = "gpio12", "gpio13"; - drive-strength = <2>; - bias-disable; - }; + i2c2_default_state: i2c2-default-state { + pins = "gpio24", "gpio25"; + function = "gsbi2"; + drive-strength = <16>; + bias-disable; }; - spi5_default: spi5_default { - pinmux { - pins = "gpio51", "gpio52", "gpio54"; - function = "gsbi5"; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio53"; - }; - - pinconf { - pins = "gpio51", "gpio52", "gpio54"; - drive-strength = <16>; - bias-disable; - }; - - pinconf_cs { - pins = "gpio53"; - drive-strength = <16>; - bias-disable; - output-high; - }; + i2c2_sleep_state: i2c2-sleep-state { + pins = "gpio24", "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - spi5_sleep: spi5_sleep { - pinmux { - function = "gpio"; - pins = "gpio51", "gpio52", "gpio53", "gpio54"; - }; - - pinconf { - pins = "gpio51", "gpio52", "gpio53", "gpio54"; - drive-strength = <2>; - bias-pull-down; - }; + i2c3_default_state: i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + drive-strength = <16>; + bias-disable; }; - i2c6_pins: i2c6 { - mux { - pins = "gpio16", "gpio17"; - function = "gsbi6"; - }; - - pinconf { - pins = "gpio16", "gpio17"; - drive-strength = <16>; - bias-disable; - }; + i2c3_sleep_state: i2c3-sleep-state { + pins = "gpio8", "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - i2c6_pins_sleep: i2c6_pins_sleep { - mux { - pins = "gpio16", "gpio17"; - function = "gpio"; - }; - pinconf { - pins = "gpio16", "gpio17"; - drive-strength = <2>; - bias-disable; - }; + i2c4_default_state: i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <16>; + bias-disable; }; - gsbi4_uart_pin_a: gsbi4-uart-pin-active-state { - rx-pins { - pins = "gpio11"; - function = "gsbi4"; - drive-strength = <2>; - bias-disable; - }; - - tx-pins { - pins = "gpio10"; - function = "gsbi4"; - drive-strength = <4>; - bias-disable; - }; + i2c4_sleep_state: i2c4-sleep-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - gsbi6_uart_2pins: gsbi6_uart_2pins { - mux { - pins = "gpio14", "gpio15"; - function = "gsbi6"; - }; + i2c6_default_state: i2c6-default-state { + pins = "gpio16", "gpio17"; + function = "gsbi6"; + drive-strength = <16>; + bias-disable; }; - gsbi6_uart_4pins: gsbi6_uart_4pins { - mux { - pins = "gpio14", "gpio15", "gpio16", "gpio17"; - function = "gsbi6"; - }; + i2c6_sleep_state: i2c6-sleep-state { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - gsbi7_uart_2pins: gsbi7_uart_2pins { - mux { - pins = "gpio82", "gpio83"; - function = "gsbi7"; - }; + i2c7_default_state: i2c7-default-state { + pins = "gpio84", "gpio85"; + function = "gsbi7"; + drive-strength = <16>; + bias-disable; }; - gsbi7_uart_4pins: gsbi7_uart_4pins { - mux { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "gsbi7"; - }; + i2c7_sleep_state: i2c7-sleep-state { + pins = "gpio84", "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - i2c7_pins: i2c7 { - mux { - pins = "gpio84", "gpio85"; - function = "gsbi7"; + spi5_default_state: spi5-default-state { + spi5-pins { + pins = "gpio51", "gpio52", "gpio54"; + function = "gsbi5"; + drive-strength = <16>; + bias-disable; }; - pinconf { - pins = "gpio84", "gpio85"; + spi5-cs-pins { + pins = "gpio53"; + function = "gpio"; drive-strength = <16>; bias-disable; + output-high; }; }; - i2c7_pins_sleep: i2c7_pins_sleep { - mux { - pins = "gpio84", "gpio85"; + spi5_sleep_state: spi5-sleep-state { + spi5-pins { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; function = "gpio"; - }; - pinconf { - pins = "gpio84", "gpio85"; drive-strength = <2>; - bias-disable; + bias-pull-down; }; }; - riva_fm_pin_a: riva-fm-active { + riva_fm_pin_a: riva-fm-active-state { pins = "gpio14", "gpio15"; function = "riva_fm"; }; - riva_bt_pin_a: riva-bt-active { + riva_bt_pin_a: riva-bt-active-state { pins = "gpio16", "gpio17"; function = "riva_bt"; }; - riva_wlan_pin_a: riva-wlan-active { + riva_wlan_pin_a: riva-wlan-active-state { pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "riva_wlan"; @@ -320,22 +220,24 @@ bias-pull-down; }; - hdmi_pinctrl: hdmi-pinctrl { - mux { - pins = "gpio70", "gpio71", "gpio72"; - function = "hdmi"; - }; - - pinconf_ddc { + hdmi_pinctrl: hdmi-pinctrl-state { + ddc-pins { pins = "gpio70", "gpio71"; + function = "hdmi"; bias-pull-up; drive-strength = <2>; }; - pinconf_hpd { + hpd-pins { pins = "gpio72"; + function = "hdmi"; bias-pull-down; drive-strength = <16>; }; }; + + ps_hold_default_state: ps-hold-default-state { + pins = "gpio78"; + function = "ps_hold"; + }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts index 2412aa3e3e8d..7752f07973f9 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -373,21 +373,21 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; + pinctrl-0 = <&sdcc3_default_state>, <&sdcc3_cd_pin_a>; status = "okay"; }; &tlmm_pinmux { - gsbi5_uart_pin_a: gsbi5-uart-pin-active { - rx { + gsbi5_uart_pin_a: gsbi5-uart-pin-active-state { + rx-pins { pins = "gpio52"; function = "gsbi5"; drive-strength = <2>; bias-pull-up; }; - tx { + tx-pins { pins = "gpio51"; function = "gsbi5"; drive-strength = <4>; @@ -396,7 +396,7 @@ }; - sdcc3_cd_pin_a: sdcc3-cd-pin-active { + sdcc3_cd_pin_a: sdcc3-cd-pin-active-state { pins = "gpio26"; function = "gpio"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 9a5ba978775a..5f1a6b4b7644 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -36,58 +36,58 @@ #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <2>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <3>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; }; idle-states { - CPU_SPC: spc { + cpu_spc: cpu-spc { compatible = "qcom,idle-state-spc", "arm,idle-state"; entry-latency-us = <400>; @@ -302,7 +302,7 @@ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&ps_hold>; + pinctrl-0 = <&ps_hold_default_state>; }; sfpb_wrapper_mutex: syscon@1200000 { @@ -435,8 +435,8 @@ gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-0 = <&i2c1_default_state>; + pinctrl-1 = <&i2c1_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -465,8 +465,8 @@ gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_pins_sleep>; + pinctrl-0 = <&i2c2_default_state>; + pinctrl-1 = <&i2c2_sleep_state>; pinctrl-names = "default", "sleep"; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; @@ -489,8 +489,8 @@ ranges; gsbi3_i2c: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-1 = <&i2c3_pins_sleep>; + pinctrl-0 = <&i2c3_default_state>; + pinctrl-1 = <&i2c3_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; @@ -528,8 +528,8 @@ gsbi4_i2c: i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c4_pins>; - pinctrl-1 = <&i2c4_pins_sleep>; + pinctrl-0 = <&i2c4_default_state>; + pinctrl-1 = <&i2c4_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16380000 0x1000>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; @@ -565,8 +565,8 @@ compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-0 = <&spi5_default>; - pinctrl-1 = <&spi5_sleep>; + pinctrl-0 = <&spi5_default_state>; + pinctrl-1 = <&spi5_sleep_state>; pinctrl-names = "default", "sleep"; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -599,8 +599,8 @@ gsbi6_i2c: i2c@16580000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c6_pins>; - pinctrl-1 = <&i2c6_pins_sleep>; + pinctrl-0 = <&i2c6_default_state>; + pinctrl-1 = <&i2c6_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16580000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; @@ -635,8 +635,8 @@ gsbi7_i2c: i2c@16680000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c7_pins>; - pinctrl-1 = <&i2c7_pins_sleep>; + pinctrl-0 = <&i2c7_default_state>; + pinctrl-1 = <&i2c7_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16680000 0x1000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -666,16 +666,16 @@ qcom,controller-type = "pmic-arbiter"; }; - qfprom: qfprom@700000 { + qfprom: efuse@700000 { compatible = "qcom,apq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; - ranges; + tsens_calib: calib@404 { reg = <0x404 0x10>; }; - tsens_backup: backup_calib@414 { + tsens_backup: backup-calib@414 { reg = <0x414 0x10>; }; }; @@ -684,7 +684,6 @@ compatible = "qcom,gcc-apq8064", "syscon"; reg = <0x00900000 0x4000>; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; clocks = <&cxo_board>, <&pxo_board>, @@ -872,7 +871,6 @@ compatible = "qcom,apq8064-sata-phy"; status = "disabled"; reg = <0x1b400000 0x200>; - reg-names = "phy_mem"; clocks = <&gcc SATA_PHY_CFG_CLK>; clock-names = "cfg"; #phy-cells = <0>; @@ -891,9 +889,9 @@ <&gcc SATA_PMALIVE_CLK>; clock-names = "slave_iface", "iface", - "bus", + "core", "rxoob", - "core_pmalive"; + "pmalive"; assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; @@ -946,7 +944,7 @@ dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; - pinctrl-0 = <&sdc4_gpios>; + pinctrl-0 = <&sdc4_default_state>; }; sdcc4bam: dma-controller@121c2000 { @@ -963,7 +961,7 @@ status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pins>; + pinctrl-0 = <&sdcc1_default_state>; arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; @@ -993,7 +991,7 @@ reg = <0x1a400000 0x100>; }; - gpu: adreno-3xx@4300000 { + gpu: gpu@4300000 { compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; @@ -1334,6 +1332,16 @@ <&gcc PCIE_PHY_RESET>; reset-names = "axi", "ahb", "por", "pci", "phy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; hdmi: hdmi-tx@4a00000 { @@ -1617,7 +1625,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - cpu = <&CPU0>; + cpu = <&cpu0>; out-ports { port { @@ -1635,7 +1643,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - cpu = <&CPU1>; + cpu = <&cpu1>; out-ports { port { @@ -1653,7 +1661,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - cpu = <&CPU2>; + cpu = <&cpu2>; out-ports { port { @@ -1671,7 +1679,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - cpu = <&CPU3>; + cpu = <&cpu3>; out-ports { port { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi index 8204e64d9a97..cee0694ef127 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi @@ -17,7 +17,7 @@ #size-cells = <1>; ranges; - smem_mem: smem_region@fa00000 { + smem_mem: smem-region@fa00000 { reg = <0xfa00000 0x200000>; no-map; }; @@ -32,10 +32,10 @@ compatible = "qcom,krait"; reg = <0>; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; cpu@1 { @@ -43,10 +43,10 @@ compatible = "qcom,krait"; reg = <1>; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; cpu@2 { @@ -54,10 +54,10 @@ compatible = "qcom,krait"; reg = <2>; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; cpu@3 { @@ -65,13 +65,13 @@ compatible = "qcom,krait"; reg = <3>; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -79,7 +79,7 @@ }; idle-states { - CPU_SPC: spc { + cpu_spc: cpu-spc { compatible = "qcom,idle-state-spc", "arm,idle-state"; entry-latency-us = <150>; @@ -245,7 +245,7 @@ reg = <0xfc190000 0x10000>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; #address-cells = <1>; @@ -311,7 +311,7 @@ bits = <0 6>; }; - tsens_s10_p1: s10_p1@d8 { + tsens_s10_p1: s10-p1@d8 { reg = <0xd8 0x2>; bits = <6 6>; }; @@ -371,137 +371,137 @@ bits = <4 6>; }; - tsens_s10_p2: s10_p2@e2 { + tsens_s10_p2: s10-p2@e2 { reg = <0xe2 0x2>; bits = <2 6>; }; - tsens_s5_p2_backup: s5-p2_backup@e3 { + tsens_s5_p2_backup: s5-p2-backup@e3 { reg = <0xe3 0x2>; bits = <0 6>; }; - tsens_mode_backup: mode_backup@e3 { + tsens_mode_backup: mode-backup@e3 { reg = <0xe3 0x1>; bits = <6 2>; }; - tsens_s6_p2_backup: s6-p2_backup@e4 { + tsens_s6_p2_backup: s6-p2-backup@e4 { reg = <0xe4 0x1>; bits = <0 6>; }; - tsens_s7_p2_backup: s7-p2_backup@e4 { + tsens_s7_p2_backup: s7-p2-backup@e4 { reg = <0xe4 0x2>; bits = <6 6>; }; - tsens_s8_p2_backup: s8-p2_backup@e5 { + tsens_s8_p2_backup: s8-p2-backup@e5 { reg = <0xe5 0x2>; bits = <4 6>; }; - tsens_s9_p2_backup: s9-p2_backup@e6 { + tsens_s9_p2_backup: s9-p2-backup@e6 { reg = <0xe6 0x2>; bits = <2 6>; }; - tsens_s10_p2_backup: s10_p2_backup@e7 { + tsens_s10_p2_backup: s10-p2-backup@e7 { reg = <0xe7 0x1>; bits = <0 6>; }; - tsens_base1_backup: base1_backup@440 { + tsens_base1_backup: base1-backup@440 { reg = <0x440 0x1>; bits = <0 8>; }; - tsens_s0_p1_backup: s0-p1_backup@441 { + tsens_s0_p1_backup: s0-p1-backup@441 { reg = <0x441 0x1>; bits = <0 6>; }; - tsens_s1_p1_backup: s1-p1_backup@442 { + tsens_s1_p1_backup: s1-p1-backup@442 { reg = <0x441 0x2>; bits = <6 6>; }; - tsens_s2_p1_backup: s2-p1_backup@442 { + tsens_s2_p1_backup: s2-p1-backup@442 { reg = <0x442 0x2>; bits = <4 6>; }; - tsens_s3_p1_backup: s3-p1_backup@443 { + tsens_s3_p1_backup: s3-p1-backup@443 { reg = <0x443 0x1>; bits = <2 6>; }; - tsens_s4_p1_backup: s4-p1_backup@444 { + tsens_s4_p1_backup: s4-p1-backup@444 { reg = <0x444 0x1>; bits = <0 6>; }; - tsens_s5_p1_backup: s5-p1_backup@444 { + tsens_s5_p1_backup: s5-p1-backup@444 { reg = <0x444 0x2>; bits = <6 6>; }; - tsens_s6_p1_backup: s6-p1_backup@445 { + tsens_s6_p1_backup: s6-p1-backup@445 { reg = <0x445 0x2>; bits = <4 6>; }; - tsens_s7_p1_backup: s7-p1_backup@446 { + tsens_s7_p1_backup: s7-p1-backup@446 { reg = <0x446 0x1>; bits = <2 6>; }; - tsens_use_backup: use_backup@447 { + tsens_use_backup: use-backup@447 { reg = <0x447 0x1>; bits = <5 3>; }; - tsens_s8_p1_backup: s8-p1_backup@448 { + tsens_s8_p1_backup: s8-p1-backup@448 { reg = <0x448 0x1>; bits = <0 6>; }; - tsens_s9_p1_backup: s9-p1_backup@448 { + tsens_s9_p1_backup: s9-p1-backup@448 { reg = <0x448 0x2>; bits = <6 6>; }; - tsens_s10_p1_backup: s10_p1_backup@449 { + tsens_s10_p1_backup: s10-p1-backup@449 { reg = <0x449 0x2>; bits = <4 6>; }; - tsens_base2_backup: base2_backup@44a { + tsens_base2_backup: base2-backup@44a { reg = <0x44a 0x2>; bits = <2 8>; }; - tsens_s0_p2_backup: s0-p2_backup@44b { + tsens_s0_p2_backup: s0-p2-backup@44b { reg = <0x44b 0x3>; bits = <2 6>; }; - tsens_s1_p2_backup: s1-p2_backup@44c { + tsens_s1_p2_backup: s1-p2-backup@44c { reg = <0x44c 0x1>; bits = <0 6>; }; - tsens_s2_p2_backup: s2-p2_backup@44c { + tsens_s2_p2_backup: s2-p2-backup@44c { reg = <0x44c 0x2>; bits = <6 6>; }; - tsens_s3_p2_backup: s3-p2_backup@44d { + tsens_s3_p2_backup: s3-p2-backup@44d { reg = <0x44d 0x2>; bits = <4 6>; }; - tsens_s4_p2_backup: s4-p2_backup@44e { + tsens_s4_p2_backup: s4-p2-backup@44e { reg = <0x44e 0x1>; bits = <2 6>; }; @@ -792,7 +792,7 @@ qcom,smd-edge = <15>; rpm-requests { - compatible = "qcom,rpm-apq8084"; + compatible = "qcom,rpm-apq8084", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; regulators-0 { diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi index da67d55fa557..a6d4390efa7c 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi @@ -28,46 +28,42 @@ }; &tlmm { - i2c0_pins: i2c0_pinmux { - mux_i2c { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - drive-strength = <16>; - bias-disable; - }; + i2c0_pins: i2c0-state { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + drive-strength = <16>; + bias-disable; }; - mdio_pins: mdio_pinmux { - mux_mdio { + mdio_pins: mdio-state { + mdio-pins { pins = "gpio53"; function = "mdio"; bias-pull-up; }; - mux_mdc { + mdc-pins { pins = "gpio52"; function = "mdc"; bias-pull-up; }; }; - serial0_pins: serial0_pinmux { - mux_uart { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; + serial0_pins: serial0-state { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; }; - spi0_pins: spi0_pinmux { - mux_spi { + spi0_pins: spi0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio55", "gpio56", "gpio57"; drive-strength = <12>; bias-disable; }; - mux_cs { + spi0-cs-pins { function = "gpio"; pins = "gpio54", "gpio4"; drive-strength = <2>; @@ -170,16 +166,19 @@ label = "ART"; reg = <0x00170000 0x00010000>; read-only; - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts index 365fbac417fd..6640ea7b6acb 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts @@ -11,40 +11,35 @@ }; &tlmm { - mdio_pins: mdio_pinmux { - pinmux_1 { + mdio_pins: mdio-state { + mdio-pins { pins = "gpio53"; function = "mdio"; + bias-pull-up; }; - pinmux_2 { + mdc-pins { pins = "gpio52"; function = "mdc"; - }; - - pinconf { - pins = "gpio52", "gpio53"; bias-pull-up; }; }; - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; + serial_pins: serial-state { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; }; - spi_0_pins: spi_0_pinmux { - pin { + spi_0_pins: spi-0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio55", "gpio56", "gpio57"; drive-strength = <2>; bias-disable; }; - pin_cs { + spi0-cs-pins { function = "gpio"; pins = "gpio54", "gpio59"; drive-strength = <2>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi index f7ac8f9d0b6f..efbe89dd4793 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi @@ -34,30 +34,22 @@ }; &tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; + serial_pins: serial-state { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; }; - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { + spi_0_pins: spi-0-state { + spi0-pins { pins = "gpio55", "gpio56", "gpio57"; + function = "blsp_spi0"; drive-strength = <12>; bias-disable; }; - pinconf_cs { + spi0-cs-pins { pins = "gpio54"; + function = "gpio"; drive-strength = <2>; bias-disable; output-high; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi index 374af6dd360a..91e296d2ea82 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi @@ -24,26 +24,26 @@ soc { pinctrl@1000000 { - serial_0_pins: serial0-pinmux { + serial_0_pins: serial0-state { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; - serial_1_pins: serial1-pinmux { + serial_1_pins: serial1-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "blsp_uart1"; bias-disable; }; - spi_0_pins: spi-0-pinmux { - pinmux { + spi_0_pins: spi-0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio13", "gpio14", "gpio15"; bias-disable; }; - pinmux_cs { + spi0-cs-pins { function = "gpio"; pins = "gpio12"; bias-disable; @@ -51,13 +51,13 @@ }; }; - i2c_0_pins: i2c-0-pinmux { + i2c_0_pins: i2c-0-state { pins = "gpio20", "gpio21"; function = "blsp_i2c0"; bias-disable; }; - nand_pins: nand-pins { + nand_pins: nand-state { pins = "gpio53", "gpio55", "gpio56", "gpio57", "gpio58", "gpio59", "gpio60", "gpio62", "gpio63", diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts index ea2987fcbff8..41c5874f6f97 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts @@ -19,20 +19,20 @@ }; pinctrl@1000000 { - serial_1_pins: serial1-pinmux { + serial_1_pins: serial1-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "blsp_uart1"; bias-disable; }; - spi_0_pins: spi-0-pinmux { - pinmux { + spi_0_pins: spi-0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio13", "gpio14", "gpio15"; bias-disable; }; - pinmux_cs { + spio-cs-pins { function = "gpio"; pins = "gpio12"; bias-disable; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts index bd3553dd2070..67ee99d69757 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts @@ -9,7 +9,7 @@ soc { pinctrl@1000000 { - serial_1_pins: serial1-pinmux { + serial_1_pins: serial1-state { pins = "gpio8", "gpio9"; function = "blsp_uart1"; bias-disable; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi index 7ef635997efa..cc88cf5f0d9b 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi @@ -24,19 +24,19 @@ soc { pinctrl@1000000 { - serial_0_pins: serial0-pinmux { + serial_0_pins: serial0-state { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; - i2c_0_pins: i2c-0-pinmux { + i2c_0_pins: i2c-0-state { pins = "gpio20", "gpio21"; function = "blsp_i2c0"; bias-disable; }; - nand_pins: nand-pins { + nand_pins: nand-state { pins = "gpio53", "gpio55", "gpio56", "gpio57", "gpio58", "gpio59", "gpio60", "gpio62", "gpio63", diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index 681cb3fc8085..06b20c196faf 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -47,7 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; reg = <0x0>; @@ -61,7 +61,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; reg = <0x1>; @@ -75,7 +75,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; reg = <0x2>; @@ -89,7 +89,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; reg = <0x3>; @@ -99,7 +99,7 @@ operating-points-v2 = <&cpu0_opp_table>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -187,7 +187,6 @@ gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq4019"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; clocks = <&xo>, <&sleep_clk>; @@ -470,6 +469,16 @@ "phy_ahb"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; qpic_bam: dma-controller@7984000 { @@ -598,24 +607,33 @@ reg = <0x90000 0x64>; status = "disabled"; - ethphy0: ethernet-phy@0 { + ethernet-phy-package@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,qca8075-package"; reg = <0>; - }; - ethphy1: ethernet-phy@1 { - reg = <1>; - }; + qcom,tx-drive-strength-milliwatt = <300>; - ethphy2: ethernet-phy@2 { - reg = <2>; - }; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; - ethphy3: ethernet-phy@3 { - reg = <3>; - }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; - ethphy4: ethernet-phy@4 { - reg = <4>; + ethphy4: ethernet-phy@4 { + reg = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts index a654d3c22c4f..5a8bf1a6f559 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts @@ -7,12 +7,11 @@ soc { pinmux@800000 { - buttons_pins: buttons_pins { - mux { - pins = "gpio54", "gpio65"; - drive-strength = <2>; - bias-pull-up; - }; + buttons_pins: buttons-state { + pins = "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts index 12e806adcda8..f09da9460c86 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts @@ -404,59 +404,49 @@ }; &qcom_pinmux { - buttons_pins: buttons_pins { - mux { - pins = "gpio66"; - drive-strength = <16>; - bias-disable; - }; + buttons_pins: buttons-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <16>; + bias-disable; }; - leds_pins: leds_pins { - mux { - pins = "gpio33"; - drive-strength = <16>; - bias-disable; - }; + leds_pins: leds-state { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; }; - mdio1_pins: mdio1_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; + mdio1_pins: mdio1-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - sw0_reset_pin: sw0_reset_pin { - mux { - pins = "gpio16"; - drive-strength = <16>; - function = "gpio"; - bias-disable; - input-disable; - }; + sw0_reset_pin: sw0-reset-state { + pins = "gpio16"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; }; - sw1_reset_pin: sw1_reset_pin { - mux { - pins = "gpio17"; - drive-strength = <16>; - function = "gpio"; - bias-disable; - input-disable; - }; + sw1_reset_pin: sw1-reset-state { + pins = "gpio17"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; }; - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio4"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; + usb1_pwr_en_pins: usb1-pwr-en-state { + pins = "gpio4"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index 2eb6758b6a3a..96e973501535 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -27,7 +27,7 @@ enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; }; @@ -37,12 +37,12 @@ enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -372,7 +372,7 @@ qcom,controller-type = "pmic-arbiter"; }; - qfprom: qfprom@700000 { + qfprom: efuse@700000 { compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; @@ -383,7 +383,7 @@ tsens_calib: calib@400 { reg = <0x400 0xb>; }; - tsens_calib_backup: calib_backup@410 { + tsens_calib_backup: calib-backup@410 { reg = <0x410 0xb>; }; }; @@ -399,70 +399,58 @@ #interrupt-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - pcie0_pins: pcie0_pinmux { - mux { - pins = "gpio3"; - function = "pcie1_rst"; - drive-strength = <12>; - bias-disable; - }; + pcie0_pins: pcie0-state { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; }; - pcie1_pins: pcie1_pinmux { - mux { - pins = "gpio48"; - function = "pcie2_rst"; - drive-strength = <12>; - bias-disable; - }; + pcie1_pins: pcie1-state { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; }; - pcie2_pins: pcie2_pinmux { - mux { - pins = "gpio63"; - function = "pcie3_rst"; - drive-strength = <12>; - bias-disable; - }; + pcie2_pins: pcie2-state { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; }; - i2c4_pins: i2c4-default { + i2c4_pins: i2c4-state { pins = "gpio12", "gpio13"; function = "gsbi4"; drive-strength = <12>; bias-disable; }; - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; + spi_pins: spi-state { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-disable; }; - leds_pins: leds_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", - "gpio26", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-low; - }; + leds_pins: leds-state { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; }; - buttons_pins: buttons_pins { - mux { - pins = "gpio54"; - drive-strength = <2>; - bias-pull-up; - }; + buttons_pins: buttons-state { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; }; - nand_pins: nand_pins { - mux { + nand_pins: nand-state { + nand-pins { pins = "gpio34", "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", @@ -473,14 +461,14 @@ bias-disable; }; - pullups { + nand-pullup-pins { pins = "gpio39"; function = "nand"; drive-strength = <10>; bias-pull-up; }; - hold { + nand-hold-pins { pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47"; @@ -490,25 +478,21 @@ }; }; - mdio0_pins: mdio0-pins { - mux { - pins = "gpio0", "gpio1"; - function = "mdio"; - drive-strength = <8>; - bias-disable; - }; + mdio0_pins: mdio0-state { + pins = "gpio0", "gpio1"; + function = "mdio"; + drive-strength = <8>; + bias-disable; }; - rgmii2_pins: rgmii2-pins { - mux { - pins = "gpio27", "gpio28", "gpio29", - "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", - "gpio60", "gpio61", "gpio62"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; + rgmii2_pins: rgmii2-state { + pins = "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", + "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; }; }; @@ -519,7 +503,6 @@ reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; tsens: thermal-sensor { compatible = "qcom,ipq8064-tsens"; @@ -1121,6 +1104,16 @@ status = "disabled"; perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1: pcie@1b700000 { @@ -1172,6 +1165,16 @@ status = "disabled"; perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie2: pcie@1b900000 { @@ -1223,6 +1226,16 @@ status = "disabled"; perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; qsgmii_csr: syscon@1bb00000 { @@ -1263,7 +1276,7 @@ <&gcc SATA_A_CLK>, <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; - clock-names = "slave_face", "iface", "core", + clock-names = "slave_iface", "iface", "core", "rxoob", "pmalive"; assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi index 34c60994d026..7de8d6c55016 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi @@ -30,7 +30,7 @@ compatible = "arm,cortex-a5"; reg = <0>; device_type = "cpu"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; }; }; @@ -61,7 +61,7 @@ ranges; compatible = "simple-bus"; - L2: cache-controller@2040000 { + l2: cache-controller@2040000 { compatible = "arm,pl310-cache"; reg = <0x02040000 0x1000>; arm,data-latency = <2 2 0>; @@ -102,7 +102,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-mdm9615"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&cxo_board>, diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi index 525d8c608b06..ca76bf8af75e 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi @@ -84,6 +84,32 @@ }; }; +&blsp1_i2c2 { + status = "okay"; + + magnetometer: magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8226_l15>; + vid-supply = <&pm8226_l6>; + }; + + accelerometer: accelerometer@1e { + compatible = "kionix,kx022-1020"; + reg = <0x1e>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8226_l15>; + vddio-supply = <&pm8226_l6>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + &blsp1_i2c5 { status = "okay"; @@ -287,6 +313,10 @@ status = "okay"; }; +&smbb { + status = "okay"; +}; + &usb { extcon = <&smbb>; dr_mode = "peripheral"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts index 992b7115b5f8..a28a83cb5340 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts @@ -10,6 +10,9 @@ #include "qcom-msm8226-microsoft-common.dtsi" +/* This device has no magnetometer */ +/delete-node/ &magnetometer; + / { model = "Nokia Lumia 630"; compatible = "microsoft,moneypenny", "qcom,msm8226"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts new file mode 100644 index 000000000000..2ecc5983d365 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Grand 2"; + compatible = "samsung,ms013g", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-home { + label = "Home Key"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; + + reg_vdd_tsp_a: regulator-vdd-tsp-a { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default>; + pinctrl-names = "default"; + }; + + reserved-memory { + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; + + vibrator { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma255"; + reg = <0x18>; + interrupts-extended = <&tlmm 64 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + + reg = <0x20>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8226_lvs1>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdhc2_default_state &sdhc2_cd_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio106", "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + motor_en_default: motor-en-default-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdhc2_cd_default: sdhc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_default: tsp-int-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 270973e85625..64c8ac94f352 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -38,47 +39,59 @@ #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; enable-method = "qcom,msm8226-smp"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + #cooling-cells = <2>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; enable-method = "qcom,msm8226-smp"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + #cooling-cells = <2>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; enable-method = "qcom,msm8226-smp"; device_type = "cpu"; reg = <2>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + #cooling-cells = <2>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; enable-method = "qcom,msm8226-smp"; device_type = "cpu"; reg = <3>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + #cooling-cells = <2>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -98,6 +111,29 @@ reg = <0x0 0x0>; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + }; + + opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + }; + + /* Higher CPU frequencies need speedbin support */ + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | @@ -121,11 +157,11 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8226"; + compatible = "qcom,rpm-msm8226", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { @@ -199,7 +235,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -231,9 +267,75 @@ #interrupt-cells = <3>; }; - apcs: syscon@f9011000 { - compatible = "syscon"; + apcs: mailbox@f9011000 { + compatible = "qcom,msm8226-apcs-kpss-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0xf9011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a7pll>, <&gcc GPLL0_VOTE>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + a7pll: clock@f9016000 { + compatible = "qcom,msm8226-a7pll"; + reg = <0xf9016000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + operating-points-v2 = <&a7pll_opp_table>; + + a7pll_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + }; + + opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + }; + + opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + }; + + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + }; + + opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + }; }; saw_l2: power-manager@f9012000 { @@ -571,7 +673,7 @@ #reset-cells = <1>; #power-domain-cells = <1>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + clocks = <&xo_board>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; @@ -635,7 +737,7 @@ reg = <0xfc4ab000 0x4>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,msm8226-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; #address-cells = <1>; @@ -1046,7 +1148,7 @@ }; }; - gpu: adreno@fdb00000 { + gpu: gpu@fdb00000 { compatible = "qcom,adreno-305.18", "qcom,adreno"; reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; @@ -1130,7 +1232,7 @@ smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 8>; + mboxes = <&apcs 8>; qcom,smd-edge = <1>; label = "lpass"; @@ -1159,6 +1261,16 @@ thermal-sensors = <&tsens 5>; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { cpu_alert0: trip0 { temperature = <75000>; @@ -1180,6 +1292,16 @@ thermal-sensors = <&tsens 2>; + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { cpu_alert1: trip0 { temperature = <75000>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 455ba4bf1bf4..3f69b98d0041 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -22,7 +22,7 @@ enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; }; cpu@1 { @@ -30,10 +30,10 @@ enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -113,7 +113,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-msm8660"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&pxo_board>, <&cxo_board>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi index 36328dbe4212..94b7694eeeff 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi @@ -25,8 +25,8 @@ }; }; -&CPU_SLEEP_0 { - compatible = "qcom,idle-state-spc"; +&cpu_sleep_0 { + compatible = "qcom,idle-state-spc", "arm,idle-state"; }; &cpu0_acc { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts index 53a6d4e85959..55077a5f2e34 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts @@ -13,6 +13,9 @@ /* This device has touchscreen on i2c1 instead */ /delete-node/ &touchscreen; +/* The magnetometer used on this device is currently unknown */ +/delete-node/ &magnetometer; + / { model = "Nokia Lumia 830"; compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts index 0cbe2d2fbbb1..376a33125941 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -29,6 +29,10 @@ height = <1280>; stride = <(720 * 3)>; format = "r8g8b8"; + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + vdd-supply = <&pm8226_l28>; + vddio-supply = <&vddio_disp_vreg>; }; }; @@ -51,6 +55,18 @@ }; }; + vddio_disp_vreg: regulator-vddio-disp { + compatible = "regulator-fixed"; + regulator-name = "vddio_disp"; + gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + regulator-boot-on; + vin-supply = <&pm8226_l8>; + pinctrl-0 = <&disp_vddio_default>; + pinctrl-names = "default"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -68,12 +84,67 @@ }; }; +&blsp1_i2c2 { + clock-frequency = <100000>; + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 38 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + interrupts-extended = <&tlmm 1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + }; +}; + &blsp1_i2c3 { + clock-frequency = <400000>; status = "okay"; + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + pinctrl-0 = <®_lcd_default>; + pinctrl-names = "default"; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>; + }; + }; + sensor@48 { compatible = "ti,tmp108"; reg = <0x48>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&temp_alert_default>; + pinctrl-names = "default"; + #thermal-sensor-cells = <0>; }; }; @@ -278,6 +349,56 @@ status = "okay"; }; +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + disp_vddio_default: disp-vddio-default-state { + pins = "gpio34"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + reg_lcd_default: reg-lcd-default-state { + pins = "gpio31", "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + temp_alert_default: temp-alert-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; +}; + &usb { extcon = <&smbb>; dr_mode = "peripheral"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 922f9e49468a..865fe7cc3951 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -25,7 +25,7 @@ enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; }; @@ -35,21 +35,21 @@ enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; }; }; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x0 0x0>; + reg = <0x80000000 0>; }; cpu-pmu { @@ -129,7 +129,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&cxo_board>, diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts index 4aaae8537a3f..261044fdfee8 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -167,7 +167,7 @@ status = "okay"; clock-frequency = <100000>; - avago_apds993@39 { + sensor@39 { compatible = "avago,apds9930"; reg = <0x39>; interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; @@ -182,7 +182,7 @@ status = "okay"; clock-frequency = <355000>; - led-controller@38 { + backlight: led-controller@38 { compatible = "ti,lm3630a"; status = "okay"; reg = <0x38>; @@ -272,6 +272,8 @@ reg = <0>; compatible = "lg,acx467akm-7"; + backlight = <&backlight>; + pinctrl-names = "default"; pinctrl-0 = <&panel_pin>; @@ -328,7 +330,7 @@ power-source = <PM8941_GPIO_S3>; }; - otg { + otg-hog { gpio-hog; gpios = <35 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts new file mode 100644 index 000000000000..903bb4d12513 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Samsung Galaxy Note 3"; + compatible = "samsung,hlte", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC3 SD card slot */ + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_pin_a>; + pinctrl-names = "default"; + + key-home { + label = "Home Key"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + touch_ldo: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "touch-ldo"; + + gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + + pinctrl-0 = <&touch_ldo_pin>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pm8941_gpios>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8941_l10>; + vio-supply = <&touch_ldo>; + + pinctrl-0 = <&touch_pin>; + pinctrl-names = "default"; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pm8941_gpios>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fuelgauge_pin>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + fuelgauge_pin: fuelgauge-int-state { + pins = "gpio26"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + + touch_pin: touchscreen-int-state { + pins = "gpio30"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + + touch_ldo_pin: touchscreen-ldo-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <PM8941_GPIO_S3>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhc_3 { + max-frequency = <100000000>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l21>; + + pinctrl-0 = <&sdhc3_pin_a>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + sdhc1_pin_a: sdhc1-pin-active-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdhc3_pin_a: sdhc3-pin-active-state { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index 5efc38d712cc..e3f9c56a778c 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -14,6 +14,8 @@ #size-cells = <1>; interrupt-parent = <&intc>; + chosen { }; + clocks { xo_board: xo_board { compatible = "fixed-clock"; @@ -33,51 +35,51 @@ #size-cells = <0>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - CPU0: cpu@0 { + cpu0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <2>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <3>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -85,7 +87,7 @@ }; idle-states { - CPU_SPC: spc { + cpu_spc: cpu-spc { compatible = "qcom,idle-state-spc", "arm,idle-state"; entry-latency-us = <150>; @@ -103,7 +105,7 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0>; }; @@ -130,11 +132,11 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8974"; + compatible = "qcom,rpm-msm8974", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { @@ -147,7 +149,7 @@ }; }; - reserved-memory { + reserved_memory: reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; @@ -217,7 +219,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -242,7 +244,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -267,7 +269,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -292,9 +294,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-2 = <&apcs 8 9>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -341,9 +341,11 @@ <0xf9002000 0x1000>; }; - apcs: syscon@f9011000 { - compatible = "syscon"; + apcs: mailbox@f9011000 { + compatible = "qcom,msm8974-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0xf9011000 0x1000>; + #mbox-cells = <1>; }; saw_l2: power-manager@f9012000 { @@ -755,7 +757,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; wcnss { @@ -958,7 +960,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU0>; + cpu = <&cpu0>; out-ports { port { @@ -976,7 +978,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU1>; + cpu = <&cpu1>; out-ports { port { @@ -994,7 +996,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU2>; + cpu = <&cpu2>; out-ports { port { @@ -1012,7 +1014,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU3>; + cpu = <&cpu3>; out-ports { port { @@ -1231,7 +1233,7 @@ reg = <0xfc4ab000 0x4>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x2100>; #address-cells = <1>; @@ -1297,7 +1299,7 @@ bits = <0 6>; }; - tsens_s10_p1: s10_p1@d8 { + tsens_s10_p1: s10-p1@d8 { reg = <0xd8 0x2>; bits = <6 6>; }; @@ -1357,137 +1359,137 @@ bits = <4 6>; }; - tsens_s10_p2: s10_p2@e2 { + tsens_s10_p2: s10-p2@e2 { reg = <0xe2 0x2>; bits = <2 6>; }; - tsens_s5_p2_backup: s5-p2_backup@e3 { + tsens_s5_p2_backup: s5-p2-backup@e3 { reg = <0xe3 0x2>; bits = <0 6>; }; - tsens_mode_backup: mode_backup@e3 { + tsens_mode_backup: mode-backup@e3 { reg = <0xe3 0x1>; bits = <6 2>; }; - tsens_s6_p2_backup: s6-p2_backup@e4 { + tsens_s6_p2_backup: s6-p2-backup@e4 { reg = <0xe4 0x1>; bits = <0 6>; }; - tsens_s7_p2_backup: s7-p2_backup@e4 { + tsens_s7_p2_backup: s7-p2-backup@e4 { reg = <0xe4 0x2>; bits = <6 6>; }; - tsens_s8_p2_backup: s8-p2_backup@e5 { + tsens_s8_p2_backup: s8-p2-backup@e5 { reg = <0xe5 0x2>; bits = <4 6>; }; - tsens_s9_p2_backup: s9-p2_backup@e6 { + tsens_s9_p2_backup: s9-p2-backup@e6 { reg = <0xe6 0x2>; bits = <2 6>; }; - tsens_s10_p2_backup: s10_p2_backup@e7 { + tsens_s10_p2_backup: s10-p2-backup@e7 { reg = <0xe7 0x1>; bits = <0 6>; }; - tsens_base1_backup: base1_backup@440 { + tsens_base1_backup: base1-backup@440 { reg = <0x440 0x1>; bits = <0 8>; }; - tsens_s0_p1_backup: s0-p1_backup@441 { + tsens_s0_p1_backup: s0-p1-backup@441 { reg = <0x441 0x1>; bits = <0 6>; }; - tsens_s1_p1_backup: s1-p1_backup@442 { + tsens_s1_p1_backup: s1-p1-backup@442 { reg = <0x441 0x2>; bits = <6 6>; }; - tsens_s2_p1_backup: s2-p1_backup@442 { + tsens_s2_p1_backup: s2-p1-backup@442 { reg = <0x442 0x2>; bits = <4 6>; }; - tsens_s3_p1_backup: s3-p1_backup@443 { + tsens_s3_p1_backup: s3-p1-backup@443 { reg = <0x443 0x1>; bits = <2 6>; }; - tsens_s4_p1_backup: s4-p1_backup@444 { + tsens_s4_p1_backup: s4-p1-backup@444 { reg = <0x444 0x1>; bits = <0 6>; }; - tsens_s5_p1_backup: s5-p1_backup@444 { + tsens_s5_p1_backup: s5-p1-backup@444 { reg = <0x444 0x2>; bits = <6 6>; }; - tsens_s6_p1_backup: s6-p1_backup@445 { + tsens_s6_p1_backup: s6-p1-backup@445 { reg = <0x445 0x2>; bits = <4 6>; }; - tsens_s7_p1_backup: s7-p1_backup@446 { + tsens_s7_p1_backup: s7-p1-backup@446 { reg = <0x446 0x1>; bits = <2 6>; }; - tsens_use_backup: use_backup@447 { + tsens_use_backup: use-backup@447 { reg = <0x447 0x1>; bits = <5 3>; }; - tsens_s8_p1_backup: s8-p1_backup@448 { + tsens_s8_p1_backup: s8-p1-backup@448 { reg = <0x448 0x1>; bits = <0 6>; }; - tsens_s9_p1_backup: s9-p1_backup@448 { + tsens_s9_p1_backup: s9-p1-backup@448 { reg = <0x448 0x2>; bits = <6 6>; }; - tsens_s10_p1_backup: s10_p1_backup@449 { + tsens_s10_p1_backup: s10-p1-backup@449 { reg = <0x449 0x2>; bits = <4 6>; }; - tsens_base2_backup: base2_backup@44a { + tsens_base2_backup: base2-backup@44a { reg = <0x44a 0x2>; bits = <2 8>; }; - tsens_s0_p2_backup: s0-p2_backup@44b { + tsens_s0_p2_backup: s0-p2-backup@44b { reg = <0x44b 0x3>; bits = <2 6>; }; - tsens_s1_p2_backup: s1-p2_backup@44c { + tsens_s1_p2_backup: s1-p2-backup@44c { reg = <0x44c 0x1>; bits = <0 6>; }; - tsens_s2_p2_backup: s2-p2_backup@44c { + tsens_s2_p2_backup: s2-p2-backup@44c { reg = <0x44c 0x2>; bits = <6 6>; }; - tsens_s3_p2_backup: s3-p2_backup@44d { + tsens_s3_p2_backup: s3-p2-backup@44d { reg = <0x44d 0x2>; bits = <4 6>; }; - tsens_s4_p2_backup: s4-p2_backup@44e { + tsens_s4_p2_backup: s4-p2-backup@44e { reg = <0x44e 0x1>; bits = <2 6>; }; @@ -1574,7 +1576,7 @@ smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,smd-edge = <0>; label = "modem"; @@ -2127,7 +2129,7 @@ }; }; - gpu: adreno@fdb00000 { + gpu: gpu@fdb00000 { compatible = "qcom,adreno-330.1", "qcom,adreno"; reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2211,7 +2213,7 @@ smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 8>; + mboxes = <&apcs 8>; qcom,smd-edge = <1>; label = "lpass"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts new file mode 100644 index 000000000000..b896cc1ad6f7 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "qcom-msm8974pro.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "HTC One (M8)"; + compatible = "htc,m8", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volume-down { + label = "volume_down"; + gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <20>; + wakeup-source; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&tlmm 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <20>; + wakeup-source; + }; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&boost_bypass_n_pin>; + pinctrl-names = "default"; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&pm8941_vib { + status = "okay"; +}; + +&pronto { + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-0 = <&wcnss_pin_a>; + pinctrl-names = "default"; + + status = "okay"; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&smbb { + status = "okay"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio27", "gpio28"; + function = "gpio"; + bias-pull-up; + }; + + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active-state { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + drive-strength = <6>; + bias-pull-down; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi new file mode 100644 index 000000000000..d3959741d2ea --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "pma8084.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart1; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-home { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c_led_gpio: i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + }; + + touchkey_pin: touchkey-int-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-state { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + panel_en_pin: panel-en-state { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-state { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + panel_rst_pin: panel-rst-state { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-state { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; +}; + +&reserved_memory { + ramoops@3e8e0000 { + compatible = "ramoops"; + reg = <0x3e8e0000 0x200000>; + + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + ecc-size = <8>; + }; +}; + +&remoteproc_adsp { + status = "okay"; + cx-supply = <&pma8084_s2>; +}; + +&remoteproc_mss { + status = "okay"; + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + /* + * Allow all klte* variants to load the same NVRAM file, + * as they have little difference in the WiFi part. + */ + brcm,board-type = "samsung,klte"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; +}; + +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ + blsp2_uart2_pins_active: blsp2-uart2-pins-active-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins-state { + hostwake-pins { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + }; + + devwake-pins { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + + sdc1_on: sdhc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdc3_on: sdc3-on-state { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + sdhc3_cd_pin: sdc3-cd-on-state { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_on: sdhc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c_touchkey_pins: i2c-touchkey-state { + pins = "gpio95", "gpio96"; + function = "gpio"; + bias-pull-up; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex-state { + function = "gpio"; + bias-pull-down; + }; + + gpioex_pin: gpioex-state { + pins = "gpio145"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + wifi_pin: wifi-state { + pins = "gpio92"; + function = "gpio"; + bias-pull-down; + }; + + panel_te_pin: panel-state { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts index b93539e2b87e..954665f3a9dd 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts @@ -1,817 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974pro.dtsi" -#include "pma8084.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/leds/common.h> +#include "qcom-msm8974pro-samsung-klte-common.dtsi" / { model = "Samsung Galaxy S5"; compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974"; - chassis-type = "handset"; - - aliases { - serial0 = &blsp1_uart1; - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_3; /* SDC2 SD card slot */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - key-volume-down { - label = "volume_down"; - gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <15>; - }; - - key-home { - label = "home_key"; - gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_HOMEPAGE>; - wakeup-source; - debounce-interval = <15>; - }; - - key-volume-up { - label = "volume_up"; - gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <15>; - }; - }; - - i2c-gpio-touchkey { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_touchkey_pins>; - - touchkey@20 { - compatible = "cypress,tm2-touchkey"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchkey_pin>; - - vcc-supply = <&max77826_ldo15>; - vdd-supply = <&pma8084_l19>; - - linux,keycodes = <KEY_APPSELECT KEY_BACK>; - }; - }; - - i2c-gpio-led { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_led_gpioex_pins>; - - i2c-gpio,delay-us = <2>; - - gpio_expander: gpio@20 { - compatible = "nxp,pcal6416"; - reg = <0x20>; - - gpio-controller; - #gpio-cells = <2>; - - vcc-supply = <&pma8084_s4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gpioex_pin>; - - reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; - }; - - led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - }; - }; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vreg_panel: panel-regulator { - compatible = "regulator-fixed"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_en_pin>; - - regulator-name = "panel-vddr-reg"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; -}; - -&blsp1_i2c2 { - status = "okay"; - - touchscreen@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - - vdd-supply = <&max77826_ldo13>; - vio-supply = <&pma8084_lvs2>; - - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; - - syna,startup-delay-ms = <100>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; - }; -}; - -&blsp1_i2c6 { - status = "okay"; - - pmic@60 { - reg = <0x60>; - compatible = "maxim,max77826"; - - regulators { - max77826_ldo1: LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo2: LDO2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - max77826_ldo3: LDO3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo4: LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo5: LDO5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo6: LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo7: LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo8: LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo9: LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo10: LDO10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo11: LDO11 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo12: LDO12 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo13: LDO13 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo14: LDO14 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo15: LDO15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_buck: BUCK { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - max77826_buckboost: BUCKBOOST { - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3400000>; - }; - }; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&blsp2_i2c6 { - status = "okay"; - - fuelgauge@36 { - compatible = "maxim,max17048"; - reg = <0x36>; - - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x56>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; - }; -}; - -&blsp2_uart2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_pins_active>; - pinctrl-1 = <&blsp2_uart2_pins_sleep>; - - bluetooth { - compatible = "brcm,bcm43540-bt"; - max-speed = <3000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pins>; - device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&tlmm>; - interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - }; -}; - -&gpu { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dsi0 { - status = "okay"; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - panel: panel@0 { - reg = <0>; - compatible = "samsung,s6e3fa2"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_te_pin &panel_rst_pin>; - - iovdd-supply = <&pma8084_lvs4>; - vddr-supply = <&vreg_panel>; - - reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - - port { - panel_in: endpoint { - remote-endpoint = <&mdss_dsi0_out>; - }; - }; - }; -}; - -&mdss_dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&mdss_dsi0_phy { - status = "okay"; - - vddio-supply = <&pma8084_l12>; }; -&pma8084_gpios { - gpio_keys_pin_a: gpio-keys-active-state { - pins = "gpio2", "gpio3", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - }; - - touchkey_pin: touchkey-int-state { - pins = "gpio6"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - touch_pin: touchscreen-int-state { - pins = "gpio8"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - panel_en_pin: panel-en-state { - pins = "gpio14"; - function = "normal"; - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - wlan_sleep_clk_pin: wlan-sleep-clk-state { - pins = "gpio16"; - function = "func2"; - - output-high; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; - }; - - panel_rst_pin: panel-rst-state { - pins = "gpio17"; - function = "normal"; - bias-disable; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - fuelgauge_pin: fuelgauge-int-state { - pins = "gpio21"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; +&i2c_led_gpio { + scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; -&remoteproc_adsp { - status = "okay"; - cx-supply = <&pma8084_s2>; -}; - -&remoteproc_mss { - status = "okay"; - cx-supply = <&pma8084_s2>; - mss-supply = <&pma8084_s6>; - mx-supply = <&pma8084_s1>; - pll-supply = <&pma8084_l12>; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pma8084-regulators"; - - pma8084_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - }; - - pma8084_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_s5: s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - pma8084_s6: s6 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l3: l3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l11: l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pma8084_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pma8084_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l19: l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - pma8084_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - pma8084_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pma8084_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pma8084_l25: l25 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - }; - - pma8084_l26: l26 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l27: l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_lvs1: lvs1 {}; - pma8084_lvs2: lvs2 {}; - pma8084_lvs3: lvs3 {}; - pma8084_lvs4: lvs4 {}; - - pma8084_5vs1: 5vs1 {}; - }; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pma8084_l20>; - vqmmc-supply = <&pma8084_s4>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_on>; - pinctrl-1 = <&sdc1_off>; -}; - -&sdhc_2 { - status = "okay"; - max-frequency = <100000000>; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pma8084_s4>; - non-removable; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; - - wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - - interrupt-parent = <&tlmm>; - interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; - }; -}; - -&sdhc_3 { - status = "okay"; - max-frequency = <100000000>; - vmmc-supply = <&pma8084_l21>; - vqmmc-supply = <&pma8084_l13>; - - /* - * cd-gpio is intentionally disabled. If enabled, an SD card - * present during boot is not initialized correctly. Without - * cd-gpios the driver resorts to polling, so hotplug works. - */ - pinctrl-names = "default"; - pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; - /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ -}; - -&tlmm { - /* This seems suspicious, but somebody with this device should look into it. */ - blsp2_uart2_pins_active: blsp2-uart2-pins-active-state { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "blsp_uart8"; - drive-strength = <8>; - bias-disable; - }; - - blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - bt_pins: bt-pins-state { - hostwake-pins { - pins = "gpio75"; - function = "gpio"; - drive-strength = <16>; - }; - - devwake-pins { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; - }; - }; - - sdc1_on: sdhc1-on-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <4>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <4>; - bias-pull-up; - }; - }; - - sdc3_on: sdc3-on-state { - pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; - }; - - sdhc3_cd_pin: sdc3-cd-on-state { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdc2_on: sdhc2-on-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - i2c_touchkey_pins: i2c-touchkey-state { - pins = "gpio95", "gpio96"; - function = "gpio"; - bias-pull-up; - }; - - i2c_led_gpioex_pins: i2c-led-gpioex-state { - pins = "gpio120", "gpio121"; - function = "gpio"; - bias-pull-down; - }; - - gpioex_pin: gpioex-state { - pins = "gpio145"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; - - wifi_pin: wifi-state { - pins = "gpio92"; - function = "gpio"; - bias-pull-down; - }; - - panel_te_pin: panel-state { - pins = "gpio12"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-disable; - }; -}; - -&usb { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - - hnp-disable; - srp-disable; - adp-disable; -}; - -&usb_hs1_phy { - status = "okay"; - - v1p8-supply = <&pma8084_l6>; - v3p3-supply = <&pma8084_l24>; - - qcom,init-seq = /bits/ 8 <0x1 0x64>; +&i2c_led_gpioex_pins { + pins = "gpio120", "gpio121"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts new file mode 100644 index 000000000000..b902e31b16c2 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro-samsung-klte-common.dtsi" + +/ { + model = "Samsung Galaxy S5 China"; + compatible = "samsung,kltechn", "samsung,klte", "qcom,msm8974pro", "qcom,msm8974"; +}; + +&i2c_led_gpio { + scl-gpios = <&tlmm 61 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 60 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&i2c_led_gpioex_pins { + pins = "gpio60", "gpio61"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts new file mode 100644 index 000000000000..2621c5928b6a --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" + +/ { + model = "Sony Xperia Z3 Compact"; + compatible = "sony,xperia-aries", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; +}; + +&gpio_keys_pin_a { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <2100000>; + qcom,fast-charge-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4280000>; + qcom,minimum-input-voltage = <4200000>; + + status = "okay"; +}; + +&synaptics_touchscreen { + vio-supply = <&pm8941_s3>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts index ee94741a26ed..409d1798de34 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -1,60 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974pro.dtsi" -#include "pm8841.dtsi" -#include "pm8941.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" / { model = "Sony Xperia Z2 Tablet"; compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974"; chassis-type = "tablet"; - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp2_uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - key-volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - key-camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - key-camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - key-volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - vreg_bl_vddio: lcd-backlight-vddio { compatible = "regulator-fixed"; regulator-name = "vreg_bl_vddio"; @@ -67,107 +18,15 @@ vin-supply = <&pm8941_s3>; startup-delay-us = <70000>; - pinctrl-names = "default"; pinctrl-0 = <&lcd_backlight_en_pin_a>; - }; - - vreg_vsp: lcd-dcdc-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_vsp"; - regulator-min-microvolt = <5600000>; - regulator-max-microvolt = <5600000>; - - gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_dcdc_en_pin_a>; - }; - - vreg_boost: vreg-boost { - compatible = "regulator-fixed"; - - regulator-name = "vreg-boost"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - regulator-always-on; - regulator-boot-on; - - gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&boost_bypass_n_pin>; }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_pin>; - }; -}; - -&blsp1_uart2 { - status = "okay"; }; -&blsp2_i2c2 { - status = "okay"; +&blsp2_i2c5 { clock-frequency = <355000>; - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupt-parent = <&tlmm>; - interrupts = <86 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <100>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - syna,sensor-type = <1>; - touchscreen-inverted-x; - }; - }; -}; - -&blsp2_i2c5 { status = "okay"; - clock-frequency = <355000>; lp8566_wled: backlight@2c { compatible = "ti,lp8556"; @@ -182,42 +41,52 @@ rom-addr = /bits/ 8 <0xa0>; rom-val = /bits/ 8 <0xff>; }; + rom-a1h { rom-addr = /bits/ 8 <0xa1>; rom-val = /bits/ 8 <0x3f>; }; + rom-a2h { rom-addr = /bits/ 8 <0xa2>; rom-val = /bits/ 8 <0x20>; }; + rom-a3h { rom-addr = /bits/ 8 <0xa3>; rom-val = /bits/ 8 <0x5e>; }; + rom-a4h { rom-addr = /bits/ 8 <0xa4>; rom-val = /bits/ 8 <0x02>; }; + rom-a5h { rom-addr = /bits/ 8 <0xa5>; rom-val = /bits/ 8 <0x04>; }; + rom-a6h { rom-addr = /bits/ 8 <0xa6>; rom-val = /bits/ 8 <0x80>; }; + rom-a7h { rom-addr = /bits/ 8 <0xa7>; rom-val = /bits/ 8 <0xf7>; }; + rom-a9h { rom-addr = /bits/ 8 <0xa9>; rom-val = /bits/ 8 <0x80>; }; + rom-aah { rom-addr = /bits/ 8 <0xaa>; rom-val = /bits/ 8 <0x0f>; }; + rom-aeh { rom-addr = /bits/ 8 <0xae>; rom-val = /bits/ 8 <0x0f>; @@ -232,8 +101,8 @@ compatible = "brcm,bcm43438-bt"; max-speed = <3000000>; - pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; + pinctrl-names = "default"; host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; @@ -241,339 +110,26 @@ }; }; -&pm8941_coincell { - status = "okay"; - - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; -}; - &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active-state { - pins = "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - bt_reg_on_pin: bt-reg-on-state { pins = "gpio16"; function = "normal"; - output-low; power-source = <PM8941_GPIO_S3>; }; - - wlan_sleep_clk_pin: wl-sleep-clk-state { - pins = "gpio17"; - function = "func2"; - - output-high; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_regulator_pin: wl-reg-active-state { - pins = "gpio18"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; - - lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state { - pins = "gpio20"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - input-disable; - output-low; - }; - -}; - -&pm8941_lpg { - status = "okay"; - - qcom,power-source = <1>; - - multi-led { - color = <LED_COLOR_ID_RGB>; - function = LED_FUNCTION_STATUS; - - #address-cells = <1>; - #size-cells = <0>; - - led@5 { - reg = <5>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@6 { - reg = <6>; - color = <LED_COLOR_ID_GREEN>; - }; - - led@7 { - reg = <7>; - color = <LED_COLOR_ID_RED>; - }; - }; -}; - -&remoteproc_adsp { - cx-supply = <&pm8841_s2>; - status = "okay"; -}; - -&remoteproc_mss { - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - status = "okay"; }; &rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - pm8841_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pm8841_s3: s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pm8841_s4: s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - regulators-1 { - compatible = "qcom,rpm-pm8941-regulators"; - - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - pm8941_s1: s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_s2: s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - pm8941_s3: s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-system-load = <154000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_s4: s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - pm8941_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8941_l3: l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8941_l4: l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pm8941_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - pm8941_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - pm8941_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - pm8941_l11: l11 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1350000>; }; - pm8941_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-boot-on; - }; - - pm8941_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pm8941_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pm8941_l17: l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pm8941_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - pm8941_l19: l19 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - - pm8941_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <500000>; - regulator-allow-set-load; - regulator-boot-on; - }; - - pm8941_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-boot-on; - }; - - pm8941_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pm8941_l23: l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - pm8941_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - regulator-boot-on; - }; - - pm8941_lvs3: lvs3 {}; - }; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_on>; - pinctrl-1 = <&sdc1_off>; -}; - -&sdhc_2 { - status = "okay"; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; -}; - -&sdhc_3 { - status = "okay"; - - max-frequency = <100000000>; - vmmc-supply = <&vreg_wlan>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc3_on>; - - #address-cells = <1>; - #size-cells = <0>; - - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - brcm,drive-strength = <10>; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; }; }; @@ -591,75 +147,13 @@ status = "okay"; }; -&tlmm { - lcd_backlight_en_pin_a: lcd-backlight-vddio-state { - pins = "gpio69"; - function = "gpio"; - drive-strength = <10>; - output-low; - bias-disable; - }; - - sdc1_on: sdc1-on-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdc2_on: sdc2-on-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - - cd-pins { - pins = "gpio62"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - }; - - sdc3_on: sdc3-on-state { - clk-pins { - pins = "gpio40"; - function = "sdc3"; - drive-strength = <10>; - bias-disable; - }; - - cmd-pins { - pins = "gpio39"; - function = "sdc3"; - drive-strength = <10>; - bias-pull-up; - }; - - data-pins { - pins = "gpio35", "gpio36", "gpio37", "gpio38"; - function = "sdc3"; - drive-strength = <10>; - bias-pull-up; - }; - }; +&synaptics_touchscreen { + vio-supply = <&pm8941_lvs3>; +}; - ts_int_pin: ts-int-pin-state { - pins = "gpio86"; +&tlmm { + bt_dev_wake_pin: bt-dev-wake-state { + pins = "gpio96"; function = "gpio"; drive-strength = <2>; bias-disable; @@ -673,33 +167,11 @@ output-low; }; - bt_dev_wake_pin: bt-dev-wake-state { - pins = "gpio96"; + lcd_backlight_en_pin_a: lcd-backlight-vddio-state { + pins = "gpio69"; function = "gpio"; - drive-strength = <2>; + drive-strength = <10>; + output-low; bias-disable; }; }; - -&usb { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; -}; - -&usb_hs1_phy { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; -}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi new file mode 100644 index 000000000000..6af7c71c7158 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi @@ -0,0 +1,541 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_pin_a>; + pinctrl-names = "default"; + + key-volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + pinctrl-names = "default"; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wlan_regulator_pin>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c2 { + clock-frequency = <355000>; + + status = "okay"; + + synaptics_touchscreen: synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupt-parent = <&tlmm>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + /* vio-supply is set in dts */ + + pinctrl-0 = <&ts_int_pin>; + pinctrl-names = "default"; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + touchscreen-inverted-x; + }; + }; +}; + +&pm8941_coincell { + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + + status = "okay"; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio5"; + function = "normal"; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_sleep_clk_pin: wl-sleep-clk-state { + pins = "gpio17"; + function = "func2"; + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active-state { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state { + pins = "gpio20"; + function = "normal"; + bias-disable; + power-source = <PM8941_GPIO_S3>; + input-disable; + output-low; + }; +}; + +&pm8941_lpg { + qcom,power-source = <1>; + + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + +&pm8941_vib { + status = "okay"; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sdhc_3 { + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + non-removable; + + pinctrl-0 = <&sdc3_on>; + pinctrl-names = "default"; + + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-0 = <&wlan_sleep_clk_pin>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd-pins { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc3_on: sdc3-on-state { + clk-pins { + pins = "gpio40"; + function = "sdc3"; + drive-strength = <10>; + bias-disable; + }; + + cmd-pins { + pins = "gpio39"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: ts-int-pin-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts new file mode 100644 index 000000000000..1ed6e1cc21d5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" + +/ { + model = "Sony Xperia Z3"; + compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; +}; + +&gpio_keys_pin_a { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <3000000>; + qcom,fast-charge-current-limit = <2150000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4280000>; + qcom,minimum-input-voltage = <4200000>; + + status = "okay"; +}; + +&synaptics_touchscreen { + vio-supply = <&pm8941_s3>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index edc9aaf828c8..39530eb580ea 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -378,6 +378,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie_ep: pcie-ep@1c00000 { @@ -417,8 +427,9 @@ interrupt-names = "global", "doorbell"; - interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>; - interconnect-names = "pcie-mem"; + interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>; + interconnect-names = "pcie-mem", "cpu-pcie"; resets = <&gcc GCC_PCIE_BCR>; reset-names = "core"; @@ -427,6 +438,7 @@ phy-names = "pciephy"; max-link-speed = <3>; num-lanes = <2>; + linux,pci-domain = <0>; status = "disabled"; }; @@ -602,6 +614,8 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi index a949454212e9..6b23ee676c9e 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi @@ -335,6 +335,10 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "global", "doorbell"; + interconnects = <&system_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>, + <&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_PCIE_0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + resets = <&gcc GCC_PCIE_BCR>; reset-names = "core"; @@ -345,6 +349,7 @@ max-link-speed = <3>; num-lanes = <2>; + linux,pci-domain = <0>; status = "disabled"; }; @@ -525,6 +530,8 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -592,39 +599,39 @@ reg = <0x15000000 0x40000>; #iommu-cells = <2>; #global-interrupts = <1>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; }; intc: interrupt-controller@17800000 { diff --git a/arch/arm/boot/dts/renesas/emev2-kzm9d.dts b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts index 89495dd37358..9b64f98310f3 100644 --- a/arch/arm/boot/dts/renesas/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts @@ -31,28 +31,28 @@ gpio_keys { compatible = "gpio-keys"; - one { + key-1 { debounce-interval = <50>; wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; - two { + key-2 { debounce-interval = <50>; wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - three { + key-3 { debounce-interval = <50>; wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - four { + key-4 { debounce-interval = <50>; wakeup-source; label = "DSW2-4"; @@ -83,8 +83,7 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x20000000 0x10000>; phy-mode = "mii"; - interrupt-parent = <&gpio0>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&gpio0 1 IRQ_TYPE_EDGE_RISING>; reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi index 4351c5a02fa5..2cc2908b48ca 100644 --- a/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi @@ -219,8 +219,7 @@ touch: touchpanel@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio2 12 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <&vcc_3v3_tft1>; }; }; diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi index de52218ceaa4..ca58ea93f58f 100644 --- a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi @@ -73,8 +73,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio0 13 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts index 29ba098f5dd5..c81840dfb7da 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r7s72100.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { @@ -24,11 +25,6 @@ stdout-path = "serial0:115200n8"; }; - memory@8000000 { - device_type = "memory"; - reg = <0x08000000 0x08000000>; - }; - flash@18000000 { compatible = "mtd-rom"; reg = <0x18000000 0x08000000>; @@ -53,13 +49,29 @@ partition@4000000 { label = "user1"; - reg = <0x04000000 0x40000000>; + reg = <0x04000000 0x04000000>; }; }; }; + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-1 { + /* JP3 must be set to 1-2 (default) */ + interrupts-extended = <&irqc 6 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_1>; + label = "SW6,SW7"; + wakeup-source; + }; + }; + leds { - status = "okay"; + /* Needs SDHI0 to be disabled */ + status = "disabled"; compatible = "gpio-leds"; led1 { @@ -70,47 +82,22 @@ gpios = <&port4 11 GPIO_ACTIVE_LOW>; }; }; -}; - -&pinctrl { - - scif2_pins: serial2 { - /* P3_0 as TxD2; P3_2 as RxD2 */ - pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; - }; - i2c2_pins: i2c2 { - /* RIIC2: P1_4 as SCL, P1_5 as SDA */ - pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + memory@8000000 { + device_type = "memory"; + reg = <0x08000000 0x08000000>; }; - ether_pins: ether { - /* Ethernet on Ports 1,2,3,5 */ - pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL */ - <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ - <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ - <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ - <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ - <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ - <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */ - <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER */ - <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN */ - <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS */ - <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0 */ - <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1 */ - <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2 */ - <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3 */ - <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0 */ - <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1 */ - <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */ - <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */ + cvcc2: regulator-mmc { + compatible = "regulator-fixed"; + regulator-name = "Cvcc2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; }; -&extal_clk { - clock-frequency = <13330000>; -}; - &bsc { flash@0 { compatible = "cfi-flash"; @@ -167,18 +154,6 @@ }; }; -&usb_x1_clk { - clock-frequency = <48000000>; -}; - -&rtc_x1_clk { - clock-frequency = <32768>; -}; - -&mtu2 { - status = "okay"; -}; - ðer { pinctrl-names = "default"; pinctrl-0 = <ðer_pins>; @@ -194,6 +169,10 @@ }; }; +&extal_clk { + clock-frequency = <13330000>; +}; + &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -208,6 +187,98 @@ }; }; +&mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + cd-gpios = <&port3 8 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&cvcc2>; + vqmmc-supply = <&cvcc2>; + bus-width = <8>; + status = "okay"; +}; + +&mtu2 { + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +&pinctrl { + ether_pins: ether { + /* Ethernet on Ports 1,2,3,5 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL */ + <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ + <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ + <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */ + <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER */ + <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN */ + <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS */ + <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0 */ + <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1 */ + <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2 */ + <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3 */ + <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0 */ + <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1 */ + <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */ + <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */ + }; + + i2c2_pins: i2c2 { + /* RIIC2: P1_4 as SCL, P1_5 as SDA */ + pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + }; + + keyboard_pins: keyboard { + /* P3_1 as IRQ6 */ + pinmux = <RZA1_PINMUX(3, 1, 3)>; + }; + + mmcif_pins: mmcif { + /* MMCIF: P3_8 is CD_GPIO, P3_10 up to P3_15, P4_0 up to P4_3 */ + pinmux = <RZA1_PINMUX(3, 10, 8)>, /* MMC_D1 */ + <RZA1_PINMUX(3, 11, 8)>, /* MMC_D0 */ + <RZA1_PINMUX(3, 12, 8)>, /* MMC_CLK */ + <RZA1_PINMUX(3, 13, 8)>, /* MMC_CMD */ + <RZA1_PINMUX(3, 14, 8)>, /* MMC_D3 */ + <RZA1_PINMUX(3, 15, 8)>, /* MMC_D2 */ + <RZA1_PINMUX(4, 0, 8)>, /* MMC_D4 */ + <RZA1_PINMUX(4, 1, 8)>, /* MMC_D5 */ + <RZA1_PINMUX(4, 2, 8)>, /* MMC_D6 */ + <RZA1_PINMUX(4, 3, 8)>; /* MMC_D7 */ + }; + + scif2_pins: serial2 { + /* P3_0 as TxD2; P3_2 as RxD2 */ + pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; + }; + + sdhi0_pins: sdhi0 { + /* SDHI0: P4_8 up to P4_15 */ + pinmux = <RZA1_PINMUX(4, 8, 3)>, /* SD_CD_0 */ + <RZA1_PINMUX(4, 9, 3)>, /* SD_WP_0 */ + <RZA1_PINMUX(4, 10, 3)>, /* SD_D1_0 */ + <RZA1_PINMUX(4, 11, 3)>, /* SD_D0_0 */ + <RZA1_PINMUX(4, 12, 3)>, /* SD_CLK_0 */ + <RZA1_PINMUX(4, 13, 3)>, /* SD_CMD_0 */ + <RZA1_PINMUX(4, 14, 3)>, /* SD_D3_0 */ + <RZA1_PINMUX(4, 15, 3)>; /* SD_D2_0 */ + }; +}; + +&rtc_x1_clk { + clock-frequency = <32768>; +}; + &rtc { status = "okay"; }; @@ -219,12 +290,30 @@ status = "okay"; }; +&sdhi0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + + bus-width = <4>; + status = "okay"; +}; + &spi4 { status = "okay"; codec: codec@0 { compatible = "wlf,wm8978"; reg = <0>; - spi-max-frequency = <5000000>; + spi-max-frequency = <500000>; + #sound-dai-cells = <0>; }; }; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&wdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts index b547216d4801..25c6d0c78828 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts @@ -78,24 +78,21 @@ pinctrl-0 = <&keyboard_pins>; key-1 { - interrupt-parent = <&irqc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_1>; label = "SW1"; wakeup-source; }; key-2 { - interrupt-parent = <&irqc>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 2 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_2>; label = "SW2"; wakeup-source; }; key-3 { - interrupt-parent = <&irqc>; - interrupts = <5 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 5 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_3>; label = "SW3"; wakeup-source; @@ -283,3 +280,8 @@ pinctrl-0 = <&scif2_pins>; status = "okay"; }; + +&wdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi index e6d8da6faffb..1a866dbaf5e9 100644 --- a/arch/arm/boot/dts/renesas/r7s72100.dtsi +++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi @@ -36,7 +36,7 @@ clock-div = <3>; }; - bsc: bsc { + bsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -125,6 +125,7 @@ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -138,6 +139,7 @@ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -151,6 +153,7 @@ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -164,6 +167,7 @@ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -177,6 +181,7 @@ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -190,6 +195,7 @@ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -203,6 +209,7 @@ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -216,6 +223,7 @@ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "bri"; clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -230,6 +238,8 @@ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI0>; + dmas = <&dmac 0x2d21>, <&dmac 0x2d22>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; @@ -245,6 +255,8 @@ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI1>; + dmas = <&dmac 0x2d25>, <&dmac 0x2d26>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; @@ -260,6 +272,8 @@ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI2>; + dmas = <&dmac 0x2d29>, <&dmac 0x2d2a>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; @@ -275,6 +289,8 @@ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI3>; + dmas = <&dmac 0x2d2d>, <&dmac 0x2d2e>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; @@ -290,6 +306,8 @@ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI4>; + dmas = <&dmac 0x2d31>, <&dmac 0x2d32>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; @@ -324,9 +342,9 @@ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R7S72100_CLK_MMCIF>; + dmas = <&dmac 0x2cc9>, <&dmac 0x2cca>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; - reg-io-width = <4>; - bus-width = <8>; status = "disabled"; }; @@ -362,6 +380,37 @@ status = "disabled"; }; + dmac: dma-controller@e8200000 { + compatible = "renesas,r7s72100-dmac", + "renesas,rz-dmac"; + reg = <0xe8200000 0x1000>, + <0xfcfe1000 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 9 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 12 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 13 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 14 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 16 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + #dma-cells = <1>; + dma-channels = <16>; + }; + gic: interrupt-controller@e8201000 { compatible = "arm,pl390"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts index cd2324b8e8ff..f69a7fe56b6e 100644 --- a/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts @@ -55,8 +55,7 @@ pinctrl-0 = <&keyboard_pins>; key-3 { - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_3>; label = "SW3"; wakeup-source; diff --git a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts index 3d02f065f71c..58becc9fbffd 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts @@ -193,8 +193,7 @@ ethernet@8000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x08000000 0x1000>; - interrupt-parent = <&irqc1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&irqc1 8 IRQ_TYPE_LEVEL_HIGH>; phy-mode = "mii"; reg-io-width = <4>; smsc,irq-active-high; diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index ac654ff45d0e..2e19ebf9e2ba 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -58,6 +58,33 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a73a4", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&mstp1_clks R8A73A4_CLK_TMU0>; + clock-names = "fck"; + power-domains = <&pd_c5>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a73a4", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&mstp1_clks R8A73A4_CLK_TMU3>; + clock-names = "fck"; + power-domains = <&pd_a3r>; + status = "disabled"; }; dbsc1: memory-controller@e6790000 { @@ -401,7 +428,6 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; power-domains = <&pd_a3sp>; - reg-io-width = <4>; status = "disabled"; }; @@ -411,7 +437,6 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; power-domains = <&pd_a3sp>; - reg-io-width = <4>; status = "disabled"; }; @@ -654,6 +679,17 @@ }; /* Gate clocks */ + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&cp_clk>, <&mp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_TMU0 R8A73A4_CLK_TMU3 + >; + clock-output-names = + "tmu0", "tmu3"; + }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; diff --git a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts index e1ac2c161e73..04d24b6d8056 100644 --- a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts @@ -224,8 +224,7 @@ touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqpin1 2 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&st1232_pins>; pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts index 64102b664055..6a8a0d2113b0 100644 --- a/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts @@ -202,8 +202,7 @@ touch: touchpanel@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio0 24 IRQ_TYPE_EDGE_FALLING>; /* GP1_29 is also shared with audio codec reset pin */ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; vcc-supply = <&vcc_3v3_tft1>; diff --git a/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi index b281a4d164b0..661cc5357b57 100644 --- a/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi @@ -55,8 +55,7 @@ rtc@68 { compatible = "ti,bq32000"; reg = <0x68>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7742.dtsi b/arch/arm/boot/dts/renesas/r8a7742.dtsi index 16d146db824a..9083d288cc33 100644 --- a/arch/arm/boot/dts/renesas/r8a7742.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7742.dtsi @@ -404,6 +404,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7742", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7742", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7742", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7742", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7742", "renesas,rcar-gen2-thermal"; @@ -1593,7 +1651,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1609,7 +1666,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; resets = <&cpg 305>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1880,6 +1936,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts index ff274bfcb664..9b16fe7ce713 100644 --- a/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts @@ -73,8 +73,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7743.dtsi b/arch/arm/boot/dts/renesas/r8a7743.dtsi index 2245d19a23bb..58a06cf37784 100644 --- a/arch/arm/boot/dts/renesas/r8a7743.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7743.dtsi @@ -329,6 +329,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7743", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7743", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7743", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7743", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7743", "renesas,rcar-gen2-thermal"; @@ -1581,7 +1639,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; max-frequency = <97500000>; status = "disabled"; }; @@ -1788,6 +1845,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7744.dtsi b/arch/arm/boot/dts/renesas/r8a7744.dtsi index aa13841f9781..034244648d18 100644 --- a/arch/arm/boot/dts/renesas/r8a7744.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7744.dtsi @@ -329,6 +329,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7744", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7744", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7744", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7744", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7744", "renesas,rcar-gen2-thermal"; @@ -1581,7 +1639,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; max-frequency = <97500000>; status = "disabled"; }; @@ -1774,6 +1831,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts index a0b574398055..5903c1f1356f 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -84,8 +84,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 0 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts index 24411044ef6c..3ac2526a24a1 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts @@ -185,8 +185,7 @@ port-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; - interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_LOW>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts index 0a75e8c79acc..571615a50620 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts @@ -68,8 +68,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc 8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7745.dtsi b/arch/arm/boot/dts/renesas/r8a7745.dtsi index 44688b8431c3..704fa6f3cbd0 100644 --- a/arch/arm/boot/dts/renesas/r8a7745.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7745.dtsi @@ -304,6 +304,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7745", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7745", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7745", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7745", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; @@ -1455,7 +1513,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; max-frequency = <97500000>; status = "disabled"; }; @@ -1578,6 +1635,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts index 644802285249..e511eb425bc5 100644 --- a/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts @@ -82,8 +82,7 @@ compatible = "ethernet-phy-id0022.1622", "ethernet-phy-ieee802.3-c22"; reg = <3>; - interrupt-parent = <&gpio5>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio5 16 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; }; }; @@ -151,8 +150,7 @@ hdmi@39 { compatible = "sil,sii9022"; reg = <0x39>; - interrupt-parent = <&gpio2>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 29 IRQ_TYPE_LEVEL_LOW>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a77470.dtsi b/arch/arm/boot/dts/renesas/r8a77470.dtsi index a5cf663a0118..a8a12275c98a 100644 --- a/arch/arm/boot/dts/renesas/r8a77470.dtsi +++ b/arch/arm/boot/dts/renesas/r8a77470.dtsi @@ -241,6 +241,50 @@ resets = <&cpg 407>; }; + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a77470", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a77470", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a77470", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; @@ -1017,6 +1061,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7778-bockw.dts b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts index a3f9d74e8877..a99d226f41a6 100644 --- a/arch/arm/boot/dts/renesas/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts @@ -61,7 +61,7 @@ }; }; -&bsc { +&lbsc { flash@0 { compatible = "cfi-flash"; reg = <0x0 0x04000000>; @@ -96,8 +96,7 @@ reg = <0x18300000 0x1000>; phy-mode = "mii"; - interrupt-parent = <&irqpin>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin 0 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; diff --git a/arch/arm/boot/dts/renesas/r8a7778.dtsi b/arch/arm/boot/dts/renesas/r8a7778.dtsi index b80e832c9277..859dd29dfce3 100644 --- a/arch/arm/boot/dts/renesas/r8a7778.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7778.dtsi @@ -40,7 +40,7 @@ spi2 = &hspi2; }; - bsc: bus@1c000000 { + lbsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts index 9b13e8d1538b..2920d87ea6ff 100644 --- a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts @@ -58,17 +58,15 @@ pinctrl-0 = <&keypad0_pins>; pinctrl-names = "default"; - interrupt-parent = <&gpio0>; - key-1 { - interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio0 17 IRQ_TYPE_EDGE_FALLING>; linux,code = <KEY_1>; label = "SW1-1"; wakeup-source; debounce-interval = <20>; }; key-2 { - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio0 18 IRQ_TYPE_EDGE_FALLING>; linux,code = <KEY_2>; label = "SW1-2"; wakeup-source; @@ -251,8 +249,7 @@ pinctrl-names = "default"; phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin0 1 IRQ_TYPE_EDGE_FALLING>; smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; diff --git a/arch/arm/boot/dts/renesas/r8a7779.dtsi b/arch/arm/boot/dts/renesas/r8a7779.dtsi index 1944703cba4f..e437c22f452d 100644 --- a/arch/arm/boot/dts/renesas/r8a7779.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7779.dtsi @@ -704,7 +704,7 @@ }; }; - lbsc: lbsc { + lbsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts index 8590981245a6..4f002aa7fbaf 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts @@ -79,28 +79,28 @@ pinctrl-0 = <&keyboard_pins>; pinctrl-names = "default"; - one { + key-1 { linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - two { + key-2 { linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; - three { + key-3 { linux,code = <KEY_3>; label = "SW2-3"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; - four { + key-4 { linux,code = <KEY_4>; label = "SW2-4"; wakeup-source; @@ -365,8 +365,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; @@ -403,8 +402,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio1>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -444,8 +442,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -461,8 +458,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -692,8 +688,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; @@ -759,6 +754,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -890,7 +886,7 @@ status = "okay"; pinctrl-0 = <&hsusb_pins>; pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; + renesas,enable-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; }; &usbphy { diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts index 683f7395fab0..b1e20579e071 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts @@ -211,8 +211,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 1 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; }; @@ -269,6 +268,7 @@ &scifa0 { pinctrl-0 = <&scifa0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -300,8 +300,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; clocks = <&osc4_clk>; clock-names = "cec"; @@ -344,8 +343,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -365,8 +363,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -377,8 +374,7 @@ vdd: regulator@70 { compatible = "dlg,da9210"; reg = <0x70>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/renesas/r8a7790.dtsi b/arch/arm/boot/dts/renesas/r8a7790.dtsi index 46fb81f5062f..4f97c09dbc9f 100644 --- a/arch/arm/boot/dts/renesas/r8a7790.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7790.dtsi @@ -227,6 +227,7 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; + bootph-all; }; /* External PCIe clock - can be overridden by the board */ @@ -265,6 +266,7 @@ soc { compatible = "simple-bus"; interrupt-parent = <&gic>; + bootph-all; #address-cells = <2>; #size-cells = <2>; @@ -374,6 +376,7 @@ pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; + bootph-all; }; tpu: pwm@e60f0000 { @@ -395,6 +398,7 @@ #clock-cells = <2>; #power-domain-cells = <0>; #reset-cells = <1>; + bootph-all; }; apmu@e6151000 { @@ -412,6 +416,7 @@ rst: reset-controller@e6160000 { compatible = "renesas,r8a7790-rst"; reg = <0 0xe6160000 0 0x0100>; + bootph-all; }; sysc: system-controller@e6180000 { @@ -434,6 +439,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7790", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7790", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7790", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7790", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7790", "renesas,rcar-gen2-thermal", @@ -1628,7 +1691,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1644,7 +1706,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 305>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1892,6 +1953,7 @@ prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; + bootph-all; }; cmt0: timer@ffca0000 { @@ -1954,6 +2016,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ @@ -1961,5 +2024,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; + bootph-all; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index 0efd9f98c75a..e9f90fa44d55 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -397,8 +397,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; @@ -435,8 +434,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -659,8 +657,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -682,6 +679,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -816,8 +814,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -833,8 +830,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -859,7 +855,7 @@ status = "okay"; pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; + renesas,enable-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; }; &usbphy { diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts index 93c86e921645..f518eadd8b9c 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -194,8 +194,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <®_1p8v>; dvdd-supply = <®_1p8v>; @@ -313,6 +312,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -329,8 +329,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -410,8 +409,7 @@ pmic@5a { compatible = "dlg,da9063l"; reg = <0x5a>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -423,8 +421,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/renesas/r8a7791.dtsi b/arch/arm/boot/dts/renesas/r8a7791.dtsi index b9d34147628e..5023b41c28b3 100644 --- a/arch/arm/boot/dts/renesas/r8a7791.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7791.dtsi @@ -125,6 +125,7 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; + bootph-all; }; /* External PCIe clock - can be overridden by the board */ @@ -152,6 +153,7 @@ soc { compatible = "simple-bus"; interrupt-parent = <&gic>; + bootph-all; #address-cells = <2>; #size-cells = <2>; @@ -291,6 +293,7 @@ pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; + bootph-all; }; tpu: pwm@e60f0000 { @@ -312,6 +315,7 @@ #clock-cells = <2>; #power-domain-cells = <0>; #reset-cells = <1>; + bootph-all; }; apmu@e6152000 { @@ -323,6 +327,7 @@ rst: reset-controller@e6160000 { compatible = "renesas,r8a7791-rst"; reg = <0 0xe6160000 0 0x0100>; + bootph-all; }; sysc: system-controller@e6180000 { @@ -351,6 +356,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7791", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7791", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7791", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7791", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7791", "renesas,rcar-gen2-thermal", @@ -1622,7 +1685,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1818,6 +1880,7 @@ prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; + bootph-all; }; cmt0: timer@ffca0000 { @@ -1880,6 +1943,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ @@ -1887,5 +1951,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; + bootph-all; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts index 540a9ad28f28..23ec0f8a6651 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts @@ -224,8 +224,7 @@ compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; phy-mode = "mii"; - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>; smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&d3_3v>; @@ -302,6 +301,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -336,8 +336,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&irqc>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_FALLING>; avdd-supply = <&d1_8v>; dvdd-supply = <&d1_8v>; @@ -378,8 +377,7 @@ reg = <0x58>; pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins>; - interrupt-parent = <&irqc>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts index 000f21a2a863..93bd81723c8f 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts @@ -115,8 +115,7 @@ compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; phy-mode = "mii"; - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>; smsc,irq-push-pull; smsc,save-mac-address; reg-io-width = <4>; @@ -184,6 +183,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi index ecfab3ff59e8..7513afc1c958 100644 --- a/arch/arm/boot/dts/renesas/r8a7792.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi @@ -82,9 +82,10 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; + bootph-all; }; - lbsc: lbsc { + lbsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -109,6 +110,7 @@ soc { compatible = "simple-bus"; interrupt-parent = <&gic>; + bootph-all; #address-cells = <2>; #size-cells = <2>; @@ -308,6 +310,7 @@ pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7792"; reg = <0 0xe6060000 0 0x144>; + bootph-all; }; cpg: clock-controller@e6150000 { @@ -318,6 +321,7 @@ #clock-cells = <2>; #power-domain-cells = <0>; #reset-cells = <1>; + bootph-all; }; apmu@e6152000 { @@ -329,6 +333,7 @@ rst: reset-controller@e6160000 { compatible = "renesas,r8a7792-rst"; reg = <0 0xe6160000 0 0x0100>; + bootph-all; }; sysc: system-controller@e6180000 { @@ -351,6 +356,65 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7792", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7792", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7792", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7792", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; @@ -888,6 +952,7 @@ prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; + bootph-all; }; cmt0: timer@ffca0000 { @@ -931,5 +996,6 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 1ea6c757893b..45b267ec2679 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -383,8 +383,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <®_1p8v>; dvdd-supply = <®_1p8v>; @@ -419,8 +418,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -622,8 +620,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -645,6 +642,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -756,8 +754,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -773,8 +770,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/renesas/r8a7793.dtsi b/arch/arm/boot/dts/renesas/r8a7793.dtsi index f51bf687f4bd..fc6d3bcca296 100644 --- a/arch/arm/boot/dts/renesas/r8a7793.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7793.dtsi @@ -117,6 +117,7 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; + bootph-all; }; pmu { @@ -137,6 +138,7 @@ soc { compatible = "simple-bus"; interrupt-parent = <&gic>; + bootph-all; #address-cells = <2>; #size-cells = <2>; @@ -276,6 +278,7 @@ pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7793"; reg = <0 0xe6060000 0 0x250>; + bootph-all; }; /* Special CPG clocks */ @@ -287,6 +290,7 @@ #clock-cells = <2>; #power-domain-cells = <0>; #reset-cells = <1>; + bootph-all; }; apmu@e6152000 { @@ -298,6 +302,7 @@ rst: reset-controller@e6160000 { compatible = "renesas,r8a7793-rst"; reg = <0 0xe6160000 0 0x0100>; + bootph-all; }; sysc: system-controller@e6180000 { @@ -326,6 +331,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7793", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7793", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7793", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7793", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7793", "renesas,rcar-gen2-thermal", @@ -1285,7 +1348,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1397,6 +1459,7 @@ prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; + bootph-all; }; cmt0: timer@ffca0000 { @@ -1459,6 +1522,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ @@ -1466,5 +1530,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; + bootph-all; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts index b5ecafbb2e4d..3f06a7f67d62 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts @@ -96,28 +96,28 @@ pinctrl-0 = <&keyboard_pins>; pinctrl-names = "default"; - one { + key-1 { linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; debounce-interval = <20>; gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; }; - two { + key-2 { linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; debounce-interval = <20>; gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; }; - three { + key-3 { linux,code = <KEY_3>; label = "SW2-3"; wakeup-source; debounce-interval = <20>; gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; }; - four { + key-4 { linux,code = <KEY_4>; label = "SW2-4"; wakeup-source; @@ -381,8 +381,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; @@ -450,8 +449,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio3>; - interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -481,6 +479,7 @@ &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts index 595e074085eb..342825605768 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts @@ -262,8 +262,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio5>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <&d1_8v>; dvdd-supply = <&d1_8v>; @@ -395,6 +394,7 @@ &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -415,8 +415,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; @@ -436,8 +435,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio3>; - interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/renesas/r8a7794.dtsi b/arch/arm/boot/dts/renesas/r8a7794.dtsi index 371dd4715dde..92010d09f6c4 100644 --- a/arch/arm/boot/dts/renesas/r8a7794.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7794.dtsi @@ -99,6 +99,7 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; + bootph-all; }; pmu { @@ -119,6 +120,7 @@ soc { compatible = "simple-bus"; interrupt-parent = <&gic>; + bootph-all; #address-cells = <2>; #size-cells = <2>; @@ -243,6 +245,7 @@ pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7794"; reg = <0 0xe6060000 0 0x11c>; + bootph-all; }; cpg: clock-controller@e6150000 { @@ -253,6 +256,7 @@ #clock-cells = <2>; #power-domain-cells = <0>; #reset-cells = <1>; + bootph-all; }; apmu@e6151000 { @@ -264,6 +268,7 @@ rst: reset-controller@e6160000 { compatible = "renesas,r8a7794-rst"; reg = <0 0xe6160000 0 0x0100>; + bootph-all; }; sysc: system-controller@e6180000 { @@ -292,6 +297,64 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7794", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@fff60000 { + compatible = "renesas,tmu-r8a7794", "renesas,tmu"; + reg = <0 0xfff60000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 111>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 111>; + status = "disabled"; + }; + + tmu2: timer@fff70000 { + compatible = "renesas,tmu-r8a7794", "renesas,tmu"; + reg = <0 0xfff70000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a7794", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; @@ -1291,7 +1354,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; }; @@ -1383,6 +1445,7 @@ prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; + bootph-all; }; cmt0: timer@ffca0000 { @@ -1426,6 +1489,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ @@ -1433,5 +1497,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; + bootph-all; }; }; diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index fa63e1afc4ef..87e03446fb4d 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -211,8 +211,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; - dma-names = "rx", "tx"; + dmas = <&dmamux 1 0 0 0 1 1>, <&dmamux 0 0 0 0 0 1>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -224,8 +224,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; - dma-names = "rx", "tx"; + dmas = <&dmamux 3 0 0 0 3 1>, <&dmamux 2 0 0 0 2 1>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -237,8 +237,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; - dma-names = "rx", "tx"; + dmas = <&dmamux 5 0 0 0 5 1>, <&dmamux 4 0 0 0 4 1>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -250,8 +250,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; - dma-names = "rx", "tx"; + dmas = <&dmamux 7 0 0 0 7 1>, <&dmamux 6 0 0 0 6 1>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -263,8 +263,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; - dma-names = "rx", "tx"; + dmas = <&dmamux 5 0 0 0 21 1>, <&dmamux 4 0 0 0 20 1>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -316,10 +316,27 @@ data-width = <8>; }; + gmac1: ethernet@44000000 { + compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; + reg = <0x44000000 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + clocks = <&sysctrl R9A06G032_HCLK_GMAC0>; + clock-names = "stmmaceth"; + power-domains = <&sysctrl>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; + pcs-handle = <&mii_conv1>; + status = "disabled"; + }; + gmac2: ethernet@44002000 { compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; reg = <0x44002000 0x2000>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -467,6 +484,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; usbphy: usb-phy { diff --git a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts index 98897f710063..1ce07d0878dc 100644 --- a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts @@ -172,8 +172,7 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x10000000 0x100>; phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin0 3 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; smsc,irq-push-pull; smsc,save-mac-address; @@ -196,8 +195,7 @@ compass@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - interrupt-parent = <&irqpin3>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin3 4 IRQ_TYPE_EDGE_FALLING>; }; ak4648: codec@12 { @@ -209,9 +207,8 @@ accelerometer@1d { compatible = "adi,adxl345"; reg = <0x1d>; - interrupt-parent = <&irqpin3>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, - <3 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&irqpin3 2 IRQ_TYPE_LEVEL_HIGH>, + <&irqpin3 3 IRQ_TYPE_LEVEL_HIGH>; }; rtc@32 { @@ -297,8 +294,7 @@ touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin1 0 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -310,8 +306,7 @@ pcf8575: gpio@20 { compatible = "nxp,pcf8575"; reg = <0x20>; - interrupt-parent = <&irqpin2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin2 3 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/renesas/sh73a0.dtsi b/arch/arm/boot/dts/renesas/sh73a0.dtsi index 30c67acc4e35..c7cc17e3c3c5 100644 --- a/arch/arm/boot/dts/renesas/sh73a0.dtsi +++ b/arch/arm/boot/dts/renesas/sh73a0.dtsi @@ -273,7 +273,6 @@ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; power-domains = <&pd_a3sp>; - reg-io-width = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index ab4cd9aab722..716f5540e438 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-elgin-r1.dtb \ rv1108-evb.dtb \ + rv1109-relfor-saib.dtb \ rv1109-sonoff-ihost.dtb \ rv1126-edgeble-neu2-io.dtb \ rv1126-sonoff-ihost.dtb \ diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts index e32c73d32f0a..4f928c7898e9 100644 --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts @@ -80,7 +80,7 @@ }; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -325,8 +325,8 @@ &i2c2 { status = "okay"; - rt5616: rt5616@1b { - compatible = "rt5616"; + rt5616: audio-codec@1b { + compatible = "realtek,rt5616"; reg = <0x1b>; clocks = <&cru SCLK_I2S_OUT>; clock-names = "mclk"; diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi index 04af224005f8..63b9912be06a 100644 --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi @@ -384,12 +384,13 @@ }; }; - acodec: acodec-ana@20030000 { - compatible = "rk3036-codec"; + acodec: audio-codec@20030000 { + compatible = "rockchip,rk3036-codec"; reg = <0x20030000 0x4000>; - rockchip,grf = <&grf>; clock-names = "acodec_pclk"; clocks = <&cru PCLK_ACODEC>; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -399,9 +400,9 @@ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI>; clock-names = "pclk"; - rockchip,grf = <&grf>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -552,11 +553,11 @@ }; spi: spi@20074000 { - compatible = "rockchip,rockchip-spi"; + compatible = "rockchip,rk3036-spi"; reg = <0x20074000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>; - clock-names = "apb-pclk","spi_pclk"; + clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; + clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts index f924d4d64c3d..c227691013ea 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts @@ -22,7 +22,7 @@ reg = <0x60000000 0x40000000>; }; - vdd_log: vdd-log { + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm3 0 1000>; regulator-name = "vdd_log"; @@ -34,7 +34,7 @@ status = "okay"; }; - vcc_sd0: fixed-regulator { + vcc_sd0: regulator-fixed { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts index f6e8d49a02ef..ada7dbfc06a5 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts @@ -19,7 +19,7 @@ reg = <0x60000000 0x40000000>; }; - vdd_log: vdd-log { + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm3 0 1000>; regulator-name = "vdd_log"; @@ -31,7 +31,7 @@ status = "okay"; }; - vcc_sd0: sdmmc-regulator { + vcc_sd0: regulator-sdmmc { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; @@ -41,7 +41,7 @@ vin-supply = <&vcc_io>; }; - vsys: vsys-regulator { + vsys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vsys"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts index 06790f05b395..25c0bcf85a56 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts @@ -61,21 +61,21 @@ }; }; - vcc_2v5: vcc-2v5 { + vcc_2v5: regulator-vcc-2v5 { compatible = "regulator-fixed"; regulator-name = "vcc_2v5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; }; - vcc_io: vcc-io { + vcc_io: regulator-vcc-io { compatible = "regulator-fixed"; regulator-name = "vcc_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_host: usb-host-regulator { + vcc_host: regulator-usb-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -89,7 +89,7 @@ vin-supply = <&vcc_io>; }; - vcc_otg: usb-otg-regulator { + vcc_otg: regulator-usb-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; @@ -103,7 +103,7 @@ vin-supply = <&vcc_io>; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sdmmc_pwr>; @@ -115,7 +115,7 @@ vin-supply = <&vcc_io>; }; - vcc_wifi: sdio-regulator { + vcc_wifi: regulator-sdio { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>; @@ -143,6 +143,14 @@ }; }; +&hdmi_sound { + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; + &mmc0 { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts index 29d8e5bf88f5..b0b029f14643 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts @@ -42,7 +42,7 @@ }; }; - vdd_log: vdd-log { + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm3 0 1000>; regulator-name = "vdd_log"; @@ -54,7 +54,7 @@ status = "okay"; }; - vsys: vsys-regulator { + vsys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vsys"; regulator-min-microvolt = <5000000>; @@ -64,7 +64,7 @@ }; /* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */ - vcc_stdby: stdby-regulator { + vcc_stdby: regulator-stdby { compatible = "regulator-fixed"; regulator-name = "5v_stdby"; regulator-min-microvolt = <5000000>; @@ -73,7 +73,7 @@ regulator-boot-on; }; - vcc_emmc: emmc-regulator { + vcc_emmc: regulator-emmc { compatible = "regulator-fixed"; regulator-name = "emmc_vccq"; regulator-min-microvolt = <3000000>; @@ -81,7 +81,7 @@ vin-supply = <&vsys>; }; - vcc_sata: sata-regulator { + vcc_sata: regulator-sata { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; @@ -94,7 +94,7 @@ vin-supply = <&vcc_stdby>; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -106,7 +106,7 @@ vin-supply = <&vcc_io>; }; - vcc_host: usb-host-regulator { + vcc_host: regulator-usb-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -119,7 +119,7 @@ vin-supply = <&vcc_stdby>; }; - vcc_otg: usb-otg-regulator { + vcc_otg: regulator-usb-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi index 30139f21de64..3f6d49459734 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi @@ -53,6 +53,22 @@ ports = <&vop0_out>, <&vop1_out>; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "HDMI"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x10000>; @@ -128,6 +144,7 @@ pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; power-domains = <&power RK3066_PD_VIO>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -879,7 +896,3 @@ &wdt { compatible = "rockchip,rk3066-wdt", "snps,dw-wdt"; }; - -&emac { - compatible = "rockchip,rk3066-emac"; -}; diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts index c7ab7fcdb436..3d27d921de76 100644 --- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts +++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts @@ -24,7 +24,7 @@ reg = <0x60000000 0x40000000>; }; - vcc5v0_otg: vcc5v0-otg-regulator { + vcc5v0_otg: regulator-vcc5v0-otg { compatible = "regulator-fixed"; gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -34,7 +34,7 @@ regulator-max-microvolt = <5000000>; }; - vcc5v0_host: vcc5v0-host-regulator { + vcc5v0_host: regulator-vcc5v0-host { compatible = "regulator-fixed"; gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts index 21c1678f4e91..21f824b09191 100644 --- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts +++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts @@ -38,7 +38,7 @@ }; }; - dc_5v: dc-5v-regulator { + dc_5v: regulator-dc-5v { compatible = "regulator-fixed"; regulator-name = "DC_5V"; regulator-min-microvolt = <5000000>; @@ -62,7 +62,7 @@ * This is a vbus-supply, which also supplies the GL852G usb hub, * thus has to be always-on */ - host_pwr_5v: host-pwr-5v-regulator { + host_pwr_5v: regulator-host-pwr-5v { compatible = "regulator-fixed"; gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; startup-delay-us = <1500>; @@ -111,7 +111,7 @@ }; }; - mcu3v3: mcu3v3-regulator { + mcu3v3: regulator-mcu3v3 { compatible = "regulator-fixed"; regulator-name = "MCU3V3"; regulator-min-microvolt = <3300000>; @@ -121,7 +121,7 @@ regulator-boot-on; }; - vcc_ddr: vcc-ddr-regulator { + vcc_ddr: regulator-vcc-ddr { compatible = "regulator-fixed"; regulator-name = "VCC_DDR"; regulator-min-microvolt = <1500000>; @@ -131,7 +131,7 @@ regulator-boot-on; }; - vcc_io: vcc-io-regulator { + vcc_io: regulator-vcc-io { compatible = "regulator-fixed"; regulator-name = "VCC_IO"; regulator-min-microvolt = <3300000>; @@ -141,7 +141,7 @@ regulator-boot-on; }; - vcc_lan: vcc-lan-regulator { + vcc_lan: regulator-vcc-lan { compatible = "regulator-fixed"; regulator-name = "VCC_LAN"; regulator-min-microvolt = <3300000>; @@ -151,7 +151,7 @@ regulator-boot-on; }; - vcc_sd: vcc-sd-regulator { + vcc_sd: regulator-vcc-sd { compatible = "regulator-fixed"; gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; startup-delay-us = <500>; @@ -163,7 +163,7 @@ pinctrl-0 = <&sdmmc_pwren>; }; - vcc_sys: vcc-sys-regulator { + vcc_sys: regulator-vcc-sys { compatible = "regulator-fixed"; regulator-name = "VCC_SYS"; regulator-min-microvolt = <5000000>; @@ -173,7 +173,7 @@ regulator-boot-on; }; - vcc33_hdmi: vcc33-hdmi-regulator { + vcc33_hdmi: regulator-vcc33-hdmi { compatible = "regulator-fixed"; regulator-name = "VCC33_HDMI"; regulator-min-microvolt = <3300000>; @@ -183,7 +183,7 @@ regulator-boot-on; }; - vcca_33: vcca-33-regulator { + vcca_33: regulator-vcca-33 { compatible = "regulator-fixed"; regulator-name = "VCCA_33"; regulator-min-microvolt = <3300000>; @@ -193,7 +193,7 @@ regulator-boot-on; }; - vdd_11: vdd-11-regulator { + vdd_11: regulator-vdd-11 { compatible = "regulator-fixed"; regulator-name = "VDD_11"; regulator-min-microvolt = <1100000>; @@ -203,7 +203,7 @@ regulator-boot-on; }; - vdd11_hdmi: vdd11-hdmi-regulator { + vdd11_hdmi: regulator-vdd11-hdmi { compatible = "regulator-fixed"; regulator-name = "VDD11_HDMI"; regulator-min-microvolt = <1100000>; @@ -213,7 +213,7 @@ regulator-boot-on; }; - vdd_arm: vdd-arm-regulator { + vdd_arm: regulator-vdd-arm { compatible = "pwm-regulator"; regulator-name = "VDD_ARM"; pwms = <&pwm1 0 25000 1>; @@ -231,7 +231,7 @@ * driver does not implement regulator support we have to make * sure here that the voltage never drops below 1050 mV. */ - vdd_log: vdd-log-regulator { + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; regulator-name = "VDD_LOG"; pwms = <&pwm2 0 25000 1>; diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index fb98873fd94e..d4572146d135 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -216,6 +216,8 @@ <&cru ACLK_LCDC0>, <&cru HCLK_LCDC0>, <&cru PCLK_MIPI>, + <&cru PCLK_MIPIPHY>, + <&cru SCLK_MIPI_24M>, <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru ACLK_VIO0>, @@ -252,6 +254,30 @@ }; }; + vpu: video-codec@10106000 { + compatible = "rockchip,rk3128-vpu", "rockchip,rk3066-vpu"; + reg = <0x10106000 0x800>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>, + <&cru ACLK_VEPU>, <&cru HCLK_VEPU>; + clock-names = "aclk_vdpu", "hclk_vdpu", + "aclk_vepu", "hclk_vepu"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3128_PD_VIDEO>; + }; + + vpu_mmu: iommu@10106800 { + compatible = "rockchip,iommu"; + reg = <0x10106800 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VEPU>, <&cru HCLK_VDPU>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3128_PD_VIDEO>; + #iommu-cells = <0>; + }; + vop: vop@1010e000 { compatible = "rockchip,rk3126-vop"; reg = <0x1010e000 0x300>; @@ -275,6 +301,43 @@ reg = <0>; remote-endpoint = <&hdmi_in_vop>; }; + + vop_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_vop>; + }; + }; + }; + + dsi: dsi@10110000 { + compatible = "rockchip,rk3128-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x10110000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_MIPI>; + clock-names = "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + power-domains = <&power RK3128_PD_VIO>; + resets = <&cru SRST_VIO_MIPI_DSI>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi_in: port@0 { + reg = <0>; + + dsi_in_vop: endpoint { + remote-endpoint = <&vop_out_dsi>; + }; + }; + + dsi_out: port@1 { + reg = <1>; + }; }; }; @@ -360,6 +423,41 @@ status = "disabled"; }; + i2s_8ch: i2s@10200000 { + compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s"; + reg = <0x10200000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma 14>, <&pdma 15>; + dma-names = "tx", "rx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spdif: spdif@10204000 { + compatible = "rockchip,rk3128-spdif", "rockchip,rk3066-spdif"; + reg = <0x10204000 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; + dmas = <&pdma 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + sfc: spi@1020c000 { + compatible = "rockchip,sfc"; + reg = <0x1020c000 0x8000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + status = "disabled"; + }; + sdmmc: mmc@10214000 { compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -408,6 +506,21 @@ status = "disabled"; }; + i2s_2ch: i2s@10220000 { + compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s"; + reg = <0x10220000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma 0>, <&pdma 1>; + dma-names = "tx", "rx"; + rockchip,playback-channels = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + nfc: nand-controller@10500000 { compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc"; reg = <0x10500000 0x4000>; @@ -477,6 +590,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; power-domains = <&power RK3128_PD_VIO>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -496,6 +610,18 @@ }; }; + dphy: phy@20038000 { + compatible = "rockchip,rk3128-dsi-dphy"; + reg = <0x20038000 0x4000>; + clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPIPHY>; + clock-names = "ref", "pclk"; + #phy-cells = <0>; + power-domains = <&power RK3128_PD_VIO>; + resets = <&cru SRST_MIPIPHY_P>; + reset-names = "apb"; + status = "disabled"; + }; + timer0: timer@20044000 { compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; @@ -1104,6 +1230,32 @@ }; }; + sfc { + sfc_bus2: sfc-bus2 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>; + }; + + sfc_bus4: sfc-bus4 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>, + <1 RK_PD2 3 &pcfg_pull_default>, + <1 RK_PD3 3 &pcfg_pull_default>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = <2 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = <2 RK_PA2 2 &pcfg_pull_default>; + }; + + sfc_cs1: sfc-cs1 { + rockchip,pins = <2 RK_PA3 2 &pcfg_pull_default>; + }; + }; + spdif { spdif_tx: spdif-tx { rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rockchip/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rockchip/rk3188-bqedison2qc.dts index 9312be362a7a..edc2b7f9112d 100644 --- a/arch/arm/boot/dts/rockchip/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rockchip/rk3188-bqedison2qc.dts @@ -130,7 +130,7 @@ reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; }; - avdd_cif: cif-avdd-regulator { + avdd_cif: regulator-cif-avdd { compatible = "regulator-fixed"; regulator-name = "avdd-cif"; regulator-min-microvolt = <2800000>; @@ -142,7 +142,7 @@ vin-supply = <&vcc28_cif>; }; - vcc_5v: vcc-5v-regulator { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "vcc-5v"; regulator-min-microvolt = <5000000>; @@ -154,7 +154,7 @@ vin-supply = <&vsys>; }; - vcc_lcd: lcd-regulator { + vcc_lcd: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "vcc-lcd"; gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; @@ -164,7 +164,7 @@ vin-supply = <&vcc_io>; }; - vcc_otg: usb-otg-regulator { + vcc_otg: regulator-usb-otg { compatible = "regulator-fixed"; regulator-name = "vcc-otg"; regulator-min-microvolt = <5000000>; @@ -177,7 +177,7 @@ vin-supply = <&vcc_5v>; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; regulator-name = "vcc-sd"; regulator-min-microvolt = <3300000>; @@ -189,7 +189,7 @@ vin-supply = <&vcc_io>; }; - vccq_emmc: emmc-vccq-regulator { + vccq_emmc: regulator-emmc-vccq { compatible = "regulator-fixed"; regulator-name = "vccq-emmc"; regulator-min-microvolt = <2800000>; @@ -198,7 +198,7 @@ }; /* supplied from the bq24196 */ - vsys: vsys-regulator { + vsys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vsys"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3188-px3-evb.dts b/arch/arm/boot/dts/rockchip/rk3188-px3-evb.dts index 0a1ae689b162..32f36d7a7d28 100644 --- a/arch/arm/boot/dts/rockchip/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rockchip/rk3188-px3-evb.dts @@ -39,7 +39,7 @@ }; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vsys"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts index 118deacd38c4..1f31c0a6774f 100644 --- a/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts @@ -78,7 +78,7 @@ pinctrl-0 = <&ir_recv_pin>; }; - vcc_otg: usb-otg-regulator { + vcc_otg: regulator-usb-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; @@ -91,7 +91,7 @@ regulator-boot-on; }; - vcc_sd0: sdmmc-regulator { + vcc_sd0: regulator-sdmmc { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; @@ -103,7 +103,7 @@ vin-supply = <&vcc_io>; }; - vcc_host: usb-host-regulator { + vcc_host: regulator-usb-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; @@ -116,7 +116,7 @@ regulator-boot-on; }; - vsys: vsys-regulator { + vsys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vsys"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3228-evb.dts b/arch/arm/boot/dts/rockchip/rk3228-evb.dts index 69a5e239ed1a..a450cf31a0be 100644 --- a/arch/arm/boot/dts/rockchip/rk3228-evb.dts +++ b/arch/arm/boot/dts/rockchip/rk3228-evb.dts @@ -17,7 +17,7 @@ reg = <0x60000000 0x40000000>; }; - vcc_phy: vcc-phy-regulator { + vcc_phy: regulator-vcc-phy { compatible = "regulator-fixed"; enable-active-high; regulator-name = "vcc_phy"; diff --git a/arch/arm/boot/dts/rockchip/rk3229-evb.dts b/arch/arm/boot/dts/rockchip/rk3229-evb.dts index 5c3d08e3eea3..c35757d2b5dc 100644 --- a/arch/arm/boot/dts/rockchip/rk3229-evb.dts +++ b/arch/arm/boot/dts/rockchip/rk3229-evb.dts @@ -18,7 +18,7 @@ reg = <0x60000000 0x40000000>; }; - dc_12v: dc-12v-regulator { + dc_12v: regulator-dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; @@ -34,7 +34,7 @@ #clock-cells = <0>; }; - vcc_host: vcc-host-regulator { + vcc_host: regulator-vcc-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; @@ -46,7 +46,7 @@ vin-supply = <&vcc_sys>; }; - vcc_phy: vcc-phy-regulator { + vcc_phy: regulator-vcc-phy { compatible = "regulator-fixed"; enable-active-high; regulator-name = "vcc_phy"; @@ -57,7 +57,7 @@ vin-supply = <&vccio_1v8>; }; - vcc_sys: vcc-sys-regulator { + vcc_sys: regulator-vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; @@ -67,7 +67,7 @@ vin-supply = <&dc_12v>; }; - vccio_1v8: vccio-1v8-regulator { + vccio_1v8: regulator-vccio-1v8 { compatible = "regulator-fixed"; regulator-name = "vccio_1v8"; regulator-min-microvolt = <1800000>; @@ -76,7 +76,7 @@ vin-supply = <&vcc_sys>; }; - vccio_3v3: vccio-3v3-regulator { + vccio_3v3: regulator-vccio-3v3 { compatible = "regulator-fixed"; regulator-name = "vccio_3v3"; regulator-min-microvolt = <3300000>; @@ -85,7 +85,7 @@ vin-supply = <&vcc_sys>; }; - vdd_arm: vdd-arm-regulator { + vdd_arm: regulator-vdd-arm { compatible = "pwm-regulator"; pwms = <&pwm1 0 25000 1>; pwm-supply = <&vcc_sys>; @@ -96,7 +96,7 @@ regulator-boot-on; }; - vdd_log: vdd-log-regulator { + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; pwm-supply = <&vcc_sys>; diff --git a/arch/arm/boot/dts/rockchip/rk3229-xms6.dts b/arch/arm/boot/dts/rockchip/rk3229-xms6.dts index 7bfbfd11fb55..28333449c43a 100644 --- a/arch/arm/boot/dts/rockchip/rk3229-xms6.dts +++ b/arch/arm/boot/dts/rockchip/rk3229-xms6.dts @@ -20,7 +20,7 @@ reg = <0x60000000 0x40000000>; }; - dc_12v: dc-12v-regulator { + dc_12v: regulator-dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; @@ -51,7 +51,7 @@ <&gpio2 29 GPIO_ACTIVE_LOW>; }; - vcc_host: vcc-host-regulator { + vcc_host: regulator-vcc-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; @@ -63,7 +63,7 @@ vin-supply = <&vcc_sys>; }; - vcc_phy: vcc-phy-regulator { + vcc_phy: regulator-vcc-phy { compatible = "regulator-fixed"; enable-active-high; regulator-name = "vcc_phy"; @@ -74,7 +74,7 @@ vin-supply = <&vccio_1v8>; }; - vcc_sys: vcc-sys-regulator { + vcc_sys: regulator-vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; @@ -84,7 +84,7 @@ vin-supply = <&dc_12v>; }; - vccio_1v8: vccio-1v8-regulator { + vccio_1v8: regulator-vccio-1v8 { compatible = "regulator-fixed"; regulator-name = "vccio_1v8"; regulator-min-microvolt = <1800000>; @@ -93,7 +93,7 @@ vin-supply = <&vcc_sys>; }; - vccio_3v3: vccio-3v3-regulator { + vccio_3v3: regulator-vccio-3v3 { compatible = "regulator-fixed"; regulator-name = "vccio_3v3"; regulator-min-microvolt = <3300000>; @@ -102,7 +102,7 @@ vin-supply = <&vcc_sys>; }; - vdd_arm: vdd-arm-regulator { + vdd_arm: regulator-vdd-arm { compatible = "pwm-regulator"; pwms = <&pwm1 0 25000 1>; pwm-supply = <&vcc_sys>; @@ -113,7 +113,7 @@ regulator-boot-on; }; - vdd_log: vdd-log-regulator { + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; pwm-supply = <&vcc_sys>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rockchip/rk3288-evb-act8846.dts index 8a635c243127..e1821fadbe7a 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-evb-act8846.dts @@ -7,7 +7,7 @@ model = "Rockchip RK3288 EVB ACT8846"; compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; - vcc_lcd: vcc-lcd { + vcc_lcd: regulator-vcc-lcd { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>; @@ -17,7 +17,7 @@ vin-supply = <&vcc_io>; }; - vcc_wl: vcc-wl { + vcc_wl: regulator-vcc-wl { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-evb.dtsi b/arch/arm/boot/dts/rockchip/rk3288-evb.dtsi index 382d2839cf47..11bb970c6112 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-evb.dtsi @@ -129,7 +129,7 @@ }; /* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */ - vcc_host: vcc-host-regulator { + vcc_host: regulator-vcc-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -140,7 +140,7 @@ regulator-boot-on; }; - vcc_phy: vcc-phy-regulator { + vcc_phy: regulator-vcc-phy { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -153,7 +153,7 @@ regulator-boot-on; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -167,7 +167,7 @@ * vcc_io directly. Those boards won't be able to power cycle SD cards * but it shouldn't hurt to toggle this pin there anyway. */ - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rockchip/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload-core.dtsi index 36efa36b7190..59029483741b 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload-core.dtsi @@ -21,7 +21,7 @@ }; - vcc_flash: flash-regulator { + vcc_flash: regulator-flash { compatible = "regulator-fixed"; regulator-name = "vcc_flash"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload.dts index a5a0826341e6..a55270672732 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload.dts @@ -85,7 +85,7 @@ #sound-dai-cells = <0>; }; - vcc_host_5v: usb-host-regulator { + vcc_host_5v: regulator-usb-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -98,7 +98,7 @@ vin-supply = <&vcc_5v>; }; - vcc_5v: vcc_sys: vsys-regulator { + vcc_5v: vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_5v"; regulator-min-microvolt = <5000000>; @@ -107,7 +107,7 @@ regulator-boot-on; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -119,7 +119,7 @@ vin-supply = <&vcc_io>; }; - vcc_otg_5v: usb-otg-regulator { + vcc_otg_5v: regulator-usb-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; @@ -132,7 +132,7 @@ vin-supply = <&vcc_5v>; }; - dovdd_1v8: dovdd-1v8-regulator { + dovdd_1v8: regulator-dovdd-1v8 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; @@ -144,7 +144,7 @@ vin-supply = <&vcc_io>; }; - vcc28_dvp: vcc28-dvp-regulator { + vcc28_dvp: regulator-vcc28-dvp { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; @@ -156,7 +156,7 @@ vin-supply = <&vcc_io>; }; - af_28: af_28-regulator { + af_28: regulator-af-28 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; @@ -168,7 +168,7 @@ vin-supply = <&vcc_io>; }; - dvdd_1v2: af_28-regulator { + dvdd_1v2: regulator-dvdd-1v2 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; @@ -180,7 +180,7 @@ vin-supply = <&vcc_io>; }; - vbat_wl: wifi-regulator { + vbat_wl: regulator-wifi { compatible = "regulator-fixed"; regulator-name = "vbat_wl"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-firefly.dtsi b/arch/arm/boot/dts/rockchip/rk3288-firefly.dtsi index 3836c61cfb76..187d4f0a52eb 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-firefly.dtsi @@ -25,7 +25,7 @@ }; }; - dovdd_1v8: dovdd-1v8-regulator { + dovdd_1v8: regulator-dovdd-1v8 { compatible = "regulator-fixed"; regulator-name = "dovdd_1v8"; regulator-min-microvolt = <1800000>; @@ -79,7 +79,7 @@ }; }; - vbat_wl: vcc_sys: vsys-regulator { + vbat_wl: vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -88,7 +88,7 @@ regulator-boot-on; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -100,7 +100,7 @@ vin-supply = <&vcc_io>; }; - vcc_flash: flash-regulator { + vcc_flash: regulator-flash { compatible = "regulator-fixed"; regulator-name = "vcc_flash"; regulator-min-microvolt = <1800000>; @@ -108,7 +108,7 @@ vin-supply = <&vcc_io>; }; - vcc_5v: usb-regulator { + vcc_5v: regulator-usb { compatible = "regulator-fixed"; regulator-name = "vcc_5v"; regulator-min-microvolt = <5000000>; @@ -118,7 +118,7 @@ vin-supply = <&vcc_sys>; }; - vcc_host_5v: usb-host-regulator { + vcc_host_5v: regulator-usb-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -131,7 +131,7 @@ vin-supply = <&vcc_5v>; }; - vcc_otg_5v: usb-otg-regulator { + vcc_otg_5v: regulator-usb-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; @@ -148,7 +148,7 @@ * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled * by the dvp_pwr pin. */ - vcc28_dvp: vcc28-dvp-regulator { + vcc28_dvp: regulator-vcc28-dvp { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts index db1eb648e0e1..dd42f8d31f70 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts @@ -37,7 +37,7 @@ }; }; - vcc_flash: flash-regulator { + vcc_flash: regulator-flash { compatible = "regulator-fixed"; regulator-name = "vcc_flash"; regulator-min-microvolt = <1800000>; @@ -45,7 +45,7 @@ vin-supply = <&vcc_io>; }; - vcc_host: usb-host-regulator { + vcc_host: regulator-usb-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -58,7 +58,7 @@ vin-supply = <&vcc_sys>; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -70,7 +70,7 @@ vin-supply = <&vcc_io>; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts index 1a5156951492..10ce0554d4fc 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts @@ -35,7 +35,7 @@ }; }; - vcc_host0_5v: usb-host0-regulator { + vcc_host0_5v: regulator-usb-host0 { compatible = "regulator-fixed"; gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -47,7 +47,7 @@ vin-supply = <&vdd_in_otg_out>; }; - vcc_host1_5v: usb-host1-regulator { + vcc_host1_5v: regulator-usb-host1 { compatible = "regulator-fixed"; gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -59,7 +59,7 @@ vin-supply = <&vdd_in_otg_out>; }; - vcc_otg_5v: usb-otg-regulator { + vcc_otg_5v: regulator-usb-otg { compatible = "regulator-fixed"; gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rockchip/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rockchip/rk3288-phycore-som.dtsi index e43887c9635f..12ab10c4adde 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-phycore-som.dtsi @@ -46,7 +46,7 @@ }; }; - vdd_emmc_io: vdd-emmc-io { + vdd_emmc_io: regulator-vdd-emmc-io { compatible = "regulator-fixed"; regulator-name = "vdd_emmc_io"; regulator-min-microvolt = <1800000>; @@ -54,7 +54,7 @@ vin-supply = <&vdd_3v3_io>; }; - vdd_in_otg_out: vdd-in-otg-out { + vdd_in_otg_out: regulator-vdd-in-otg-out { compatible = "regulator-fixed"; regulator-name = "vdd_in_otg_out"; regulator-always-on; @@ -63,7 +63,7 @@ regulator-max-microvolt = <5000000>; }; - vdd_misc_1v8: vdd-misc-1v8 { + vdd_misc_1v8: regulator-vdd-misc-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_misc_1v8"; regulator-always-on; diff --git a/arch/arm/boot/dts/rockchip/rk3288-popmetal.dts b/arch/arm/boot/dts/rockchip/rk3288-popmetal.dts index fd90f3b8fc32..560bc23c33b1 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-popmetal.dts @@ -47,7 +47,7 @@ pinctrl-0 = <&ir_int>; }; - vcc_flash: flash-regulator { + vcc_flash: regulator-flash { compatible = "regulator-fixed"; regulator-name = "vcc_flash"; regulator-min-microvolt = <1800000>; @@ -55,7 +55,7 @@ vin-supply = <&vcc_io>; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -67,7 +67,7 @@ vin-supply = <&vcc_io>; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -80,7 +80,7 @@ * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled * by the dvp_pwr pin. */ - vcc18_dvp: vcc18-dvp-regulator { + vcc18_dvp: regulator-vcc18-dvp { compatible = "regulator-fixed"; regulator-name = "vcc18-dvp"; regulator-min-microvolt = <1800000>; @@ -88,7 +88,7 @@ vin-supply = <&vcc28_dvp>; }; - vcc28_dvp: vcc28-dvp-regulator { + vcc28_dvp: regulator-vcc28-dvp { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-r89.dts b/arch/arm/boot/dts/rockchip/rk3288-r89.dts index 633e5a032463..40c65dbfb1cd 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-r89.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-r89.dts @@ -48,7 +48,7 @@ pinctrl-0 = <&ir_int>; }; - vcc_host: vcc-host-regulator { + vcc_host: regulator-vcc-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -59,7 +59,7 @@ regulator-boot-on; }; - vcc_otg: vcc-otg-regulator { + vcc_otg: regulator-vcc-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; @@ -70,7 +70,7 @@ regulator-boot-on; }; - vcc_sdmmc: sdmmc-regulator { + vcc_sdmmc: regulator-sdmmc { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; @@ -80,7 +80,7 @@ vin-supply = <&vcc_io>; }; - vcc_sys: sys-regulator { + vcc_sys: regulator-sys { compatible = "regulator-fixed"; regulator-name = "sys-supply"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rockchip/rk3288-rock2-som.dtsi index 76363b8afcb9..30f914f22a50 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-rock2-som.dtsi @@ -23,7 +23,7 @@ clock-output-names = "ext_gmac"; }; - vcc_flash: flash-regulator { + vcc_flash: regulator-flash { compatible = "regulator-fixed"; regulator-name = "vcc_flash"; regulator-min-microvolt = <1800000>; @@ -32,7 +32,7 @@ vin-supply = <&vcc_io>; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-rock2-square.dts b/arch/arm/boot/dts/rockchip/rk3288-rock2-square.dts index 13cfdaa95cc7..58a7270b87da 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-rock2-square.dts @@ -70,7 +70,7 @@ }; }; - sata_pwr: sata-prw-regulator { + sata_pwr: regulator-sata-prw { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; @@ -108,7 +108,7 @@ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; - vcc_usb_host: vcc-host-regulator { + vcc_usb_host: regulator-vcc-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -117,7 +117,7 @@ regulator-name = "vcc_host"; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi index 09618bb7d872..8e27a20f2845 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi @@ -85,7 +85,7 @@ }; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -94,7 +94,7 @@ regulator-boot-on; }; - vcc_sd: sdmmc-regulator { + vcc_sd: regulator-sdmmc { compatible = "regulator-fixed"; gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-brain.dts index aa33d09184ad..ade9cc291813 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-brain.dts @@ -14,11 +14,11 @@ compatible = "google,veyron-brain-rev0", "google,veyron-brain", "google,veyron", "rockchip,rk3288"; - vcc33_sys: vcc33-sys { + vcc33_sys: regulator-vcc33-sys { vin-supply = <&vcc_5v>; }; - vcc33_io: vcc33_io { + vcc33_io: regulator-vcc33-io { compatible = "regulator-fixed"; regulator-name = "vcc33_io"; regulator-always-on; @@ -28,7 +28,7 @@ }; /* This turns on vbus for host2 and otg (dwc2) */ - vcc5_host2: vcc5-host2-regulator { + vcc5_host2: regulator-vcc5-host2 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-chromebook.dtsi index 092316be67f7..3677571b4d82 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-chromebook.dtsi @@ -43,23 +43,23 @@ }; /* A non-regulated voltage from power supply or battery */ - vccsys: vccsys { + vccsys: regulator-vccsys { compatible = "regulator-fixed"; regulator-name = "vccsys"; regulator-boot-on; regulator-always-on; }; - vcc33_sys: vcc33-sys { + vcc33_sys: regulator-vcc33-sys { vin-supply = <&vccsys>; }; - vcc_5v: vcc-5v { + vcc_5v: regulator-vcc-5v { vin-supply = <&vccsys>; }; /* This turns on vbus for host1 (dwc2) */ - vcc5_host1: vcc5-host1-regulator { + vcc5_host1: regulator-vcc5-host1 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; @@ -71,7 +71,7 @@ }; /* This turns on vbus for otg for host mode (dwc2) */ - vcc5v_otg: vcc5v-otg-regulator { + vcc5v_otg: regulator-vcc5v-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-edp.dtsi index 32c0f10765dd..fb031964fa2b 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron-edp.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-edp.dtsi @@ -6,7 +6,7 @@ */ / { - backlight_regulator: backlight-regulator { + backlight_regulator: regulator-backlight { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; @@ -17,7 +17,7 @@ startup-delay-us = <15000>; }; - panel_regulator: panel-regulator { + panel_regulator: regulator-panel { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts index 309b122b4d0d..6a0844e16279 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts @@ -18,7 +18,7 @@ "google,veyron-fievel-rev0", "google,veyron-fievel", "google,veyron", "rockchip,rk3288"; - vccsys: vccsys { + vccsys: regulator-vccsys { compatible = "regulator-fixed"; regulator-name = "vccsys"; regulator-boot-on; @@ -29,14 +29,14 @@ * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys, * enabled by vcc_18 */ - vcc33_io: vcc33-io { + vcc33_io: regulator-vcc33-io { compatible = "regulator-fixed"; regulator-always-on; regulator-boot-on; regulator-name = "vcc33_io"; }; - vcc5_host1: vcc5-host1-regulator { + vcc5_host1: regulator-vcc5-host1 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; @@ -47,7 +47,7 @@ regulator-boot-on; }; - vcc5_host2: vcc5-host2-regulator { + vcc5_host2: regulator-vcc5-host2 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -58,7 +58,7 @@ regulator-boot-on; }; - vcc5v_otg: vcc5v-otg-regulator { + vcc5v_otg: regulator-vcc5v-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-mickey.dts index ffd1121d19be..d665c3e8862c 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-mickey.dts @@ -18,11 +18,11 @@ "google,veyron-mickey-rev0", "google,veyron-mickey", "google,veyron", "rockchip,rk3288"; - vcc_5v: vcc-5v { + vcc_5v: regulator-vcc-5v { vin-supply = <&vcc33_sys>; }; - vcc33_io: vcc33_io { + vcc33_io: regulator-vcc33-io { compatible = "regulator-fixed"; regulator-name = "vcc33_io"; regulator-always-on; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-pinky.dts index 6337238891eb..cc27d116d025 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-pinky.dts @@ -14,8 +14,8 @@ compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", "google,veyron", "rockchip,rk3288"; - /delete-node/backlight-regulator; - /delete-node/panel-regulator; + /delete-node/regulator-backlight; + /delete-node/regulator-panel; /delete-node/emmc-pwrseq; /delete-node/vcc18-lcd; }; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi index d838bf0d5d9a..260d6c92cfd1 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi @@ -75,7 +75,7 @@ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; - vcc_5v: vcc-5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "vcc_5v"; regulator-always-on; @@ -84,7 +84,7 @@ regulator-max-microvolt = <5000000>; }; - vcc33_sys: vcc33-sys { + vcc33_sys: regulator-vcc33-sys { compatible = "regulator-fixed"; regulator-name = "vcc33_sys"; regulator-always-on; @@ -93,7 +93,7 @@ regulator-max-microvolt = <3300000>; }; - vcc50_hdmi: vcc50-hdmi { + vcc50_hdmi: regulator-vcc50-hdmi { compatible = "regulator-fixed"; regulator-name = "vcc50_hdmi"; regulator-always-on; @@ -101,7 +101,7 @@ vin-supply = <&vcc_5v>; }; - vdd_logic: vdd-logic { + vdd_logic: regulator-vdd-logic { compatible = "pwm-regulator"; regulator-name = "vdd_logic"; diff --git a/arch/arm/boot/dts/rockchip/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rockchip/rk3288-vmarc-som.dtsi index 793951655b73..44a9efc68f42 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-vmarc-som.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-vmarc-som.dtsi @@ -11,7 +11,7 @@ / { compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288"; - vccio_flash: vccio-flash-regulator { + vccio_flash: regulator-vccio-flash { compatible = "regulator-fixed"; regulator-name = "vccio_flash"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/rockchip/rk3288-vyasa.dts b/arch/arm/boot/dts/rockchip/rk3288-vyasa.dts index b156a83eb7d7..1954475c69b6 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-vyasa.dts @@ -19,7 +19,7 @@ device_type = "memory"; }; - dc12_vbat: dc12-vbat { + dc12_vbat: regulator-dc12-vbat { compatible = "regulator-fixed"; regulator-name = "dc12_vbat"; regulator-min-microvolt = <12000000>; @@ -28,7 +28,7 @@ regulator-boot-on; }; - vboot_3v3: vboot-3v3 { + vboot_3v3: regulator-vboot-3v3 { compatible = "regulator-fixed"; regulator-name = "vboot_3v3"; regulator-min-microvolt = <3300000>; @@ -38,7 +38,7 @@ vin-supply = <&dc12_vbat>; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <3700000>; @@ -48,7 +48,7 @@ vin-supply = <&dc12_vbat>; }; - vboot_5v: vboot-5v { + vboot_5v: regulator-vboot-5v { compatible = "regulator-fixed"; regulator-name = "vboot_sv"; regulator-min-microvolt = <5000000>; @@ -58,7 +58,7 @@ vin-supply = <&dc12_vbat>; }; - v3g_3v3: v3g-3v3 { + v3g_3v3: regulator-v3g-3v3 { compatible = "regulator-fixed"; regulator-name = "v3g_3v3"; regulator-min-microvolt = <3300000>; @@ -68,7 +68,7 @@ vin-supply = <&dc12_vbat>; }; - vsus_5v: vsus-5v { + vsus_5v: regulator-vsus-5v { compatible = "regulator-fixed"; regulator-name = "vsus_5v"; regulator-min-microvolt = <5000000>; @@ -78,7 +78,7 @@ vin-supply = <&vcc_io>; }; - vcc50_hdmi: vcc50-hdmi { + vcc50_hdmi: regulator-vcc50-hdmi { compatible = "regulator-fixed"; regulator-name = "vcc50_hdmi"; enable-active-high; @@ -90,7 +90,7 @@ vin-supply = <&vsus_5v>; }; - vusb1_5v: vusb1-5v { + vusb1_5v: regulator-vusb1-5v { compatible = "regulator-fixed"; regulator-name = "vusb1_5v"; enable-active-high; @@ -102,7 +102,7 @@ vin-supply = <&vsus_5v>; }; - vusb2_5v: vusb2-5v { + vusb2_5v: regulator-vusb2-5v { compatible = "regulator-fixed"; regulator-name = "vusb2_5v"; enable-active-high; diff --git a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi index f37137f298d5..e6a78bcf9163 100644 --- a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi @@ -194,17 +194,14 @@ }; emac: ethernet@10204000 { - compatible = "snps,arc-emac"; + compatible = "rockchip,rk3066-emac"; reg = <0x10204000 0x3c>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - - rockchip,grf = <&grf>; - clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; clock-names = "hclk", "macref"; max-speed = <100>; phy-mode = "rmii"; - + rockchip,grf = <&grf>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rockchip/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip/rockchip-radxa-dalang-carrier.dtsi index da1d548b7330..cf5e2ed356ef 100644 --- a/arch/arm/boot/dts/rockchip/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip/rockchip-radxa-dalang-carrier.dtsi @@ -23,7 +23,7 @@ pinctrl-0 = <&wifi_enable_h>; }; - vcc12v_dcin: vcc12v-dcin-regulator { + vcc12v_dcin: regulator-vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; @@ -32,7 +32,7 @@ regulator-max-microvolt = <12000000>; }; - vcc5v0_sys: vcc5v0-sys-regulator { + vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -42,7 +42,7 @@ vin-supply = <&vcc12v_dcin>; }; - vbus_host: vbus-host { + vbus_host: regulator-vbus-host { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&usb1_en_oc>; @@ -51,7 +51,7 @@ vin-supply = <&vcc5v0_sys>; }; - vbus_typec: vbus-typec { + vbus_typec: regulator-vbus-typec { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&usb0_en_oc>; diff --git a/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts index 2d9994379eb2..3c64f0cca9eb 100644 --- a/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts +++ b/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts @@ -25,7 +25,7 @@ stdout-path = "serial2:1500000n8"; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vsys"; regulator-min-microvolt = <5000000>; @@ -168,8 +168,8 @@ pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; status = "okay"; - dh2228fv: dac@0 { - compatible = "rohm,dh2228fv"; + display: display@0 { + compatible = "elgin,jg10309-01"; reg = <0>; spi-max-frequency = <24000000>; spi-cpha; diff --git a/arch/arm/boot/dts/rockchip/rv1108-evb.dts b/arch/arm/boot/dts/rockchip/rv1108-evb.dts index ef150f4ee99d..0b04a8325d54 100644 --- a/arch/arm/boot/dts/rockchip/rv1108-evb.dts +++ b/arch/arm/boot/dts/rockchip/rv1108-evb.dts @@ -60,7 +60,7 @@ pwms = <&pwm0 0 25000 0>; }; - vcc_sys: vsys-regulator { + vcc_sys: regulator-vsys { compatible = "regulator-fixed"; regulator-name = "vsys"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts new file mode 100644 index 000000000000..c13829d32c32 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Relfor Labs Pvt. Ltd. + */ + + +/dts-v1/; +#include "rv1109.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Rockchip RV1109 Relfor Saib Board"; + compatible = "relfor,saib", "rockchip,rv1109"; + + gpio-keys { + compatible = "gpio-keys"; + + button { + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DATA>; + label = "GPIO User Switch"; + linux,input-type = <1>; + }; + }; + + ir_receiver: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx>; + }; + + ir_transmitter: ir-transmitter { + compatible = "pwm-ir-tx"; + pwms = <&pwm11 0 10000000 1>; + }; + + led-controller { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + max-brightness = <65535>; + + led-0 { + active-low; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm9 0 50000 0>; + }; + + led-1 { + active-low; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm6 0 50000 0>; + }; + + led-2 { + active-low; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm10 0 50000 0>; + }; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led-0 { + pwms = <&pwm2 0 50000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + }; + + led-1 { + pwms = <&pwm8 0 50000 0>; + max-brightness = <0>; + linux,default-trigger = "none"; + }; + + led-2 { + pwms = <&pwm5 0 50000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + }; + }; + + sdio_pwrseq: pwrseq-sdio { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc0>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; + }; + + vcc_0v8: regulator-vcc-0v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + startup-delay-us = <150>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v2_ddr: regulator-vcc-1v2-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v2_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + startup-delay-us = <75000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + startup-delay-us = <51000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc1v8_ir: regulator-vcc1v8-ir { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_ir"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_2v5_ddr: regulator-vcc-2v5-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v5_ddr"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + startup-delay-us = <75000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_arm: regulator-vdd-arm { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1000000>; + regulator-settling-time-up-us = <18000>; + regulator-always-on; + regulator-boot-on; + pwm-supply = <&vcc3v3_sys>; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_npu_vepu: regulator-vdd-npu-vepu { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 5000 1>; + regulator-name = "vdd_npu_vepu"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <950000>; + regulator-settling-time-up-us = <18000>; + regulator-always-on; + regulator-boot-on; + pwm-supply = <&vcc3v3_sys>; + vin-supply = <&vcc5v0_sys>; + }; + + thermal_sensor1: thermal-sensor1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&saradc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = <(-40000) 826 + 85000 609>; + }; + + thermal_sensor2: thermal-sensor2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&saradc 2>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = <(-40000) 826 + 85000 609>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + non-removable; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>; + pinctrl-names = "default"; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3m2_xfer>; + pinctrl-names = "default"; + status = "okay"; + + rtc0: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + #clock-cells = <0>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&rtc_int>; + pinctrl-names = "default"; + }; +}; + +&i2s0 { + /delete-property/ pinctrl-0; + rockchip,trcm-sync-rx-only; + pinctrl-0 = <&i2s0m0_sclk_rx>, + <&i2s0m0_lrck_rx>, + <&i2s0m0_sdi0>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pinctrl { + bluetooth-pins { + bt_reset: bt-reset { + rockchip,pins = + <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + bt_wake_dev: bt-wake-dev { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + bt_wake_host: bt-wake-host { + rockchip,pins = + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + buttons { + switch: switch { + rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir { + ir_rx: ir-rx { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pwm { + pwm0m0_pins_pull_up: pwm0m0-pins-pull-up { + rockchip,pins = + /* pwm0_pin_m0 */ + <0 RK_PB6 3 &pcfg_pull_up>; + }; + pwm1m0_pins_pull_up: pwm1m0-pins-pull-up { + rockchip,pins = + /* pwm1_pin_m0 */ + <0 RK_PB7 3 &pcfg_pull_up>; + }; + }; + + rtc { + rtc_int: rtc-int { + rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio0-supply = <&vcc3v3_sys>; + pmuio1-supply = <&vcc3v3_sys>; + vccio4-supply = <&vcc3v3_sys>; + vccio5-supply = <&vcc3v3_sys>; + vccio6-supply = <&vcc3v3_sys>; + vccio7-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&pwm0 { + /delete-property/ pinctrl-0; + pinctrl-0 = <&pwm0m0_pins_pull_up>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm1 { + /delete-property/ pinctrl-0; + pinctrl-0 = <&pwm1m0_pins_pull_up>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm2 { + /delete-property/ pinctrl-0; + pinctrl-0 = <&pwm2m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm5 { + pinctrl-0 = <&pwm5m0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm6 { + pinctrl-0 = <&pwm6m0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm8 { + pinctrl-0 = <&pwm8m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm9 { + pinctrl-0 = <&pwm9m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm10 { + pinctrl-0 = <&pwm10m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm11 { + /delete-property/ pinctrl-0; + pinctrl-0 = <&pwm11m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + max-frequency = <100000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + device-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>; + pinctrl-names = "default"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts index 0c2396b8f8db..d4e93d7c57a6 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts +++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts @@ -21,7 +21,7 @@ stdout-path = "serial2:1500000n8"; }; - vcc12v_dcin: vcc12v-dcin-regulator { + vcc12v_dcin: regulator-vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; @@ -30,7 +30,7 @@ regulator-max-microvolt = <12000000>; }; - vcc5v0_sys: vcc5v0-sys-regulator { + vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -40,7 +40,7 @@ vin-supply = <&vcc12v_dcin>; }; - v3v3_sys: v3v3-sys-regulator { + v3v3_sys: regulator-v3v3-sys { compatible = "regulator-fixed"; regulator-name = "v3v3_sys"; regulator-always-on; @@ -69,8 +69,7 @@ &mdio { phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", - "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x0>; pinctrl-names = "default"; pinctrl-0 = <ð_phy_rst>; diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2.dtsi b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2.dtsi index 7ea8d7d16f5f..5c1b60deb51b 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2.dtsi @@ -11,7 +11,7 @@ mmc0 = &emmc; }; - vccio_flash: vccio-flash-regulator { + vccio_flash: regulator-vccio-flash { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi index 06b1d7f2d858..35ef6732281f 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi @@ -97,6 +97,156 @@ <0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>; }; }; + i2c3 { + /omit-if-no-ref/ + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + /* i2c3_scl_m0 */ + <3 RK_PA4 5 &pcfg_pull_none>, + /* i2c3_sda_m0 */ + <3 RK_PA5 5 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + /* i2c3_scl_m1 */ + <2 RK_PD4 7 &pcfg_pull_none>, + /* i2c3_sda_m1 */ + <2 RK_PD5 7 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + /* i2c3_scl_m2 */ + <1 RK_PD6 3 &pcfg_pull_none>, + /* i2c3_sda_m2 */ + <1 RK_PD7 3 &pcfg_pull_none>; + }; + }; + i2s0 { + i2s0m0_lrck_tx: i2s0m0-lrck-tx { + rockchip,pins = + /* i2s0_lrck_tx_m0 */ + <3 RK_PD3 1 &pcfg_pull_none>; + }; + i2s0m0_lrck_rx: i2s0m0-lrck-rx { + rockchip,pins = + /* i2s0_lrck_rx_m0 */ + <3 RK_PD4 1 &pcfg_pull_none>; + }; + i2s0m0_mclk: i2s0m0-mclk { + rockchip,pins = + /* i2s0_mclk_m0 */ + <3 RK_PD2 1 &pcfg_pull_none>; + }; + i2s0m0_sclk_rx: i2s0m0-sclk-rx { + rockchip,pins = + /* i2s0_sclk_rx_m0 */ + <3 RK_PD1 1 &pcfg_pull_none>; + }; + i2s0m0_sclk_tx: i2s0m0-sclk-tx { + rockchip,pins = + /* i2s0_sclk_tx_m0 */ + <3 RK_PD0 1 &pcfg_pull_none>; + }; + i2s0m0_sdi0: i2s0m0-sdi0 { + rockchip,pins = + /* i2s0_sdi0_m0 */ + <3 RK_PD6 1 &pcfg_pull_none>; + }; + i2s0m0_sdo0: i2s0m0-sdo0 { + rockchip,pins = + /* i2s0_sdo0_m0 */ + <3 RK_PD5 1 &pcfg_pull_none>; + }; + i2s0m0_sdo1_sdi3: i2s0m0-sdo1-sdi3 { + rockchip,pins = + /* i2s0_sdo1_sdi3_m0 */ + <3 RK_PD7 1 &pcfg_pull_none>; + }; + i2s0m0_sdo2_sdi2: i2s0m0-sdo2-sdi2 { + rockchip,pins = + /* i2s0_sdo2_sdi2_m0 */ + <4 RK_PA0 1 &pcfg_pull_none>; + }; + i2s0m0_sdo3_sdi1: i2s0m0-sdo3-sdi1 { + rockchip,pins = + /* i2s0_sdo3_sdi1_m0 */ + <4 RK_PA1 1 &pcfg_pull_none>; + }; + i2s0m1_lrck_tx: i2s0m1-lrck-tx { + rockchip,pins = + /* i2s0_lrck_tx_m1 */ + <3 RK_PA5 3 &pcfg_pull_none>; + }; + i2s0m1_lrck_rx: i2s0m1-lrck-rx { + rockchip,pins = + /* i2s0_lrck_rx_m1 */ + <3 RK_PB2 3 &pcfg_pull_none>; + }; + i2s0m1_mclk: i2s0m1-mclk { + rockchip,pins = + /* i2s0_mclk_m1 */ + <3 RK_PB0 3 &pcfg_pull_none>; + }; + i2s0m1_sclk_rx: i2s0m1-sclk-rx { + rockchip,pins = + /* i2s0_sclk_rx_m1 */ + <3 RK_PB1 3 &pcfg_pull_none>; + }; + i2s0m1_sclk_tx: i2s0m1-sclk-tx { + rockchip,pins = + /* i2s0_sclk_tx_m1 */ + <3 RK_PA4 3 &pcfg_pull_none>; + }; + i2s0m1_sdi0: i2s0m1-sdi0 { + rockchip,pins = + /* i2s0_sdi0_m1 */ + <3 RK_PA7 3 &pcfg_pull_none>; + }; + i2s0m1_sdo0: i2s0m1-sdo0 { + rockchip,pins = + /* i2s0_sdo0_m1 */ + <3 RK_PA6 3 &pcfg_pull_none>; + }; + i2s0m1_sdo1_sdi3: i2s0m1-sdo1-sdi3 { + rockchip,pins = + /* i2s0_sdo1_sdi3_m1 */ + <3 RK_PB3 3 &pcfg_pull_none>; + }; + i2s0m1_sdo2_sdi2: i2s0m1-sdo2-sdi2 { + rockchip,pins = + /* i2s0_sdo2_sdi2_m1 */ + <3 RK_PB4 3 &pcfg_pull_none>; + }; + i2s0m1_sdo3_sdi1: i2s0m1-sdo3-sdi1 { + rockchip,pins = + /* i2s0_sdo3_sdi1_m1 */ + <3 RK_PB5 3 &pcfg_pull_none>; + }; + }; + pwm0 { + /omit-if-no-ref/ + pwm0m0_pins: pwm0m0-pins { + rockchip,pins = + /* pwm0_pin_m0 */ + <0 RK_PB6 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm0m1_pins: pwm0m1-pins { + rockchip,pins = + /* pwm0_pin_m1 */ + <2 RK_PB3 5 &pcfg_pull_none>; + }; + }; + pwm1 { + /omit-if-no-ref/ + pwm1m0_pins: pwm1m0-pins { + rockchip,pins = + /* pwm1_pin_m0 */ + <0 RK_PB7 3 &pcfg_pull_none>; + }; + }; pwm2 { /omit-if-no-ref/ pwm2m0_pins: pwm2m0-pins { @@ -104,6 +254,106 @@ /* pwm2_pin_m0 */ <0 RK_PC0 3 &pcfg_pull_none>; }; + /omit-if-no-ref/ + pwm2m1_pins: pwm2m1-pins { + rockchip,pins = + /* pwm2_pin_m1 */ + <2 RK_PB1 5 &pcfg_pull_none>; + }; + }; + pwm3 { + /omit-if-no-ref/ + pwm3m0_pins: pwm3m0-pins { + rockchip,pins = + /* pwm3_pin_m0 */ + <0 RK_PC1 3 &pcfg_pull_none>; + }; + }; + pwm4 { + /omit-if-no-ref/ + pwm4m0_pins: pwm4m0-pins { + rockchip,pins = + /* pwm4_pin_m0 */ + <0 RK_PC2 3 &pcfg_pull_none>; + }; + }; + pwm5 { + /omit-if-no-ref/ + pwm5m0_pins: pwm5m0-pins { + rockchip,pins = + /* pwm5_pin_m0 */ + <0 RK_PC3 3 &pcfg_pull_none>; + }; + }; + pwm6 { + /omit-if-no-ref/ + pwm6m0_pins: pwm6m0-pins { + rockchip,pins = + /* pwm6_pin_m0 */ + <0 RK_PB2 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm6m1_pins: pwm6m1-pins { + rockchip,pins = + /* pwm6_pin_m1 */ + <2 RK_PD4 5 &pcfg_pull_none>; + }; + }; + pwm7 { + /omit-if-no-ref/ + pwm7m0_pins: pwm7m0-pins { + rockchip,pins = + /* pwm7_pin_m0 */ + <0 RK_PB1 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm7m1_pins: pwm7m1-pins { + rockchip,pins = + /* pwm7_pin_m1 */ + <3 RK_PA0 5 &pcfg_pull_none>; + }; + }; + pwm8 { + /omit-if-no-ref/ + pwm8m0_pins: pwm8m0-pins { + rockchip,pins = + /* pwm8_pin_m0 */ + <3 RK_PA4 6 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm8m1_pins: pwm8m1-pins { + rockchip,pins = + /* pwm8_pin_m1 */ + <2 RK_PD7 5 &pcfg_pull_none>; + }; + }; + pwm9 { + /omit-if-no-ref/ + pwm9m0_pins: pwm9m0-pins { + rockchip,pins = + /* pwm9_pin_m0 */ + <3 RK_PA5 6 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm9m1_pins: pwm9m1-pins { + rockchip,pins = + /* pwm9_pin_m1 */ + <2 RK_PD6 5 &pcfg_pull_none>; + }; + }; + pwm10 { + /omit-if-no-ref/ + pwm10m0_pins: pwm10m0-pins { + rockchip,pins = + /* pwm10_pin_m0 */ + <3 RK_PA6 6 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm10m1_pins: pwm10m1-pins { + rockchip,pins = + /* pwm10_pin_m1 */ + <2 RK_PD5 5 &pcfg_pull_none>; + }; }; pwm11 { /omit-if-no-ref/ @@ -112,6 +362,12 @@ /* pwm11_pin_m0 */ <3 RK_PA7 6 &pcfg_pull_none>; }; + /omit-if-no-ref/ + pwm11m1_pins: pwm11m1-pins { + rockchip,pins = + /* pwm11_pin_m1 */ + <3 RK_PA1 5 &pcfg_pull_none>; + }; }; rgmii { /omit-if-no-ref/ diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi index bb603cae13df..d6e8b63daa42 100644 --- a/arch/arm/boot/dts/rockchip/rv1126.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi @@ -22,6 +22,7 @@ aliases { i2c0 = &i2c0; i2c2 = &i2c2; + i2c3 = &i2c3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -268,6 +269,28 @@ status = "disabled"; }; + pwm0: pwm@ff430000 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff430000 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff430010 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff430010 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + pwm2: pwm@ff430020 { compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; reg = <0xff430020 0x10>; @@ -279,6 +302,61 @@ status = "disabled"; }; + pwm3: pwm@ff430030 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff430030 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@ff440000 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440000 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@ff440010 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440010 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@ff440020 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440020 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@ff440030 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440030 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + pmucru: clock-controller@ff480000 { compatible = "rockchip,rv1126-pmucru"; reg = <0xff480000 0x1000>; @@ -308,6 +386,53 @@ clock-names = "apb_pclk"; }; + i2c3: i2c@ff520000 { + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; + reg = <0xff520000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + rockchip,grf = <&pmugrf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm8: pwm@ff550000 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff550000 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + pinctrl-0 = <&pwm8m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@ff550010 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff550010 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + pinctrl-0 = <&pwm9m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@ff550020 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff550020 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + pinctrl-0 = <&pwm10m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + pwm11: pwm@ff550030 { compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; reg = <0xff550030 0x10>; @@ -419,6 +544,40 @@ clock-names = "pclk", "timer"; }; + wdt: watchdog@ff680000 { + compatible = "rockchip,rv1126-wdt", "snps,dw-wdt"; + reg = <0xff680000 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_WDT>; + status = "disabled"; + }; + + i2s0: i2s@ff800000 { + compatible = "rockchip,rv1126-i2s-tdm"; + reg = <0xff800000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru MCLK_I2S0_TX>, <&cru MCLK_I2S0_RX>, <&cru HCLK_I2S0>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac 20>, <&dmac 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0m0_sclk_tx>, + <&i2s0m0_sclk_rx>, + <&i2s0m0_mclk>, + <&i2s0m0_lrck_tx>, + <&i2s0m0_lrck_rx>, + <&i2s0m0_sdi0>, + <&i2s0m0_sdo0>, + <&i2s0m0_sdo1_sdi3>, + <&i2s0m0_sdo2_sdi2>, + <&i2s0m0_sdo3_sdi1>; + resets = <&cru SRST_I2S0_TX_M>, <&cru SRST_I2S0_RX_M>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + vop: vop@ffb00000 { compatible = "rockchip,rv1126-vop"; reg = <0xffb00000 0x200>, <0xffb00a00 0x400>; diff --git a/arch/arm/boot/dts/samsung/exynos3250.dtsi b/arch/arm/boot/dts/samsung/exynos3250.dtsi index 3f1015edab43..b6c3826a9424 100644 --- a/arch/arm/boot/dts/samsung/exynos3250.dtsi +++ b/arch/arm/boot/dts/samsung/exynos3250.dtsi @@ -826,6 +826,7 @@ samsung,spi-src-clk = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; + fifo-depth = <256>; status = "disabled"; }; @@ -842,6 +843,7 @@ samsung,spi-src-clk = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; + fifo-depth = <64>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/samsung/exynos4.dtsi b/arch/arm/boot/dts/samsung/exynos4.dtsi index 7f981b5c0d64..ed47d0ce04e1 100644 --- a/arch/arm/boot/dts/samsung/exynos4.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4.dtsi @@ -621,6 +621,7 @@ clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; + fifo-depth = <256>; status = "disabled"; }; @@ -636,6 +637,7 @@ clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; + fifo-depth = <64>; status = "disabled"; }; @@ -651,6 +653,7 @@ clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi2_bus>; + fifo-depth = <64>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts b/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts index b566f878ed84..18f4f494093b 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts @@ -88,7 +88,7 @@ &keypad { samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; + linux,input-no-autorepeat; wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_cols>; diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi index e5254e32aa8f..70e3091062f9 100644 --- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi @@ -45,6 +45,12 @@ /* Default S-BOOT bootloader loads initramfs here */ linux,initrd-start = <0x42000000>; linux,initrd-end = <0x42800000>; + + /* + * Stock bootloader provides incorrect memory size in ATAG_MEM; + * override it here + */ + linux,usable-memory-range = <0x40000000 0x3fc00000>; }; firmware@204f000 { @@ -294,12 +300,31 @@ regulator-max-microvolt = <2800000>; }; + earmic_bias_reg: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "EAR_MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + sound: sound { compatible = "samsung,midas-audio"; model = "TAB3"; mic-bias-supply = <&mic_bias_reg>; submic-bias-supply = <&submic_bias_reg>; + lineout-sel-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + headset-mic-bias-supply = <&earmic_bias_reg>; + headset-detect-gpios = <&gpx0 4 GPIO_ACTIVE_LOW>; + headset-key-gpios = <&gpx3 6 GPIO_ACTIVE_LOW>; + samsung,headset-4pole-threshold-microvolt = <710 2000>; + samsung,headset-button-threshold-microvolt = <0 130 260>; + io-channel-names = "headset-detect"; + io-channels = <&adc 0>; + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", @@ -345,6 +370,11 @@ }; }; +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + &bus_acp { devfreq = <&bus_dmc>; status = "okay"; @@ -505,12 +535,11 @@ wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clocks = <&pmu_system_controller 0>, + <&s5m8767_osc S2MPS11_CLK_BT>; + clock-names = "MCLK1", "MCLK2"; interrupt-controller; #interrupt-cells = <2>; - interrupt-parent = <&gpx3>; - interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/samsung/exynos4412-origen.dts b/arch/arm/boot/dts/samsung/exynos4412-origen.dts index 23b151645d66..10ab7bc90f50 100644 --- a/arch/arm/boot/dts/samsung/exynos4412-origen.dts +++ b/arch/arm/boot/dts/samsung/exynos4412-origen.dts @@ -453,7 +453,7 @@ &keypad { samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <2>; - linux,keypad-no-autorepeat; + linux,input-no-autorepeat; wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts b/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts index 715dfcba1417..c83fb250e664 100644 --- a/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts @@ -69,7 +69,7 @@ &keypad { samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; + linux,input-no-autorepeat; wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; @@ -105,31 +105,31 @@ linux,code = <6>; }; - key-A { + key-a { keypad,row = <2>; keypad,column = <6>; linux,code = <30>; }; - key-B { + key-b { keypad,row = <2>; keypad,column = <7>; linux,code = <48>; }; - key-C { + key-c { keypad,row = <0>; keypad,column = <5>; linux,code = <46>; }; - key-D { + key-d { keypad,row = <2>; keypad,column = <5>; linux,code = <32>; }; - key-E { + key-e { keypad,row = <0>; keypad,column = <7>; linux,code = <18>; diff --git a/arch/arm/boot/dts/samsung/exynos5250.dtsi b/arch/arm/boot/dts/samsung/exynos5250.dtsi index 99c84bebf25a..b9e7c4938818 100644 --- a/arch/arm/boot/dts/samsung/exynos5250.dtsi +++ b/arch/arm/boot/dts/samsung/exynos5250.dtsi @@ -511,6 +511,7 @@ clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; + fifo-depth = <256>; }; spi_1: spi@12d30000 { @@ -526,6 +527,7 @@ clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; + fifo-depth = <64>; }; spi_2: spi@12d40000 { @@ -541,6 +543,7 @@ clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi2_bus>; + fifo-depth = <64>; }; mmc_0: mmc@12200000 { diff --git a/arch/arm/boot/dts/samsung/exynos5420.dtsi b/arch/arm/boot/dts/samsung/exynos5420.dtsi index 25ed90374679..196c6d04675a 100644 --- a/arch/arm/boot/dts/samsung/exynos5420.dtsi +++ b/arch/arm/boot/dts/samsung/exynos5420.dtsi @@ -658,6 +658,7 @@ pinctrl-0 = <&spi0_bus>; clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; clock-names = "spi", "spi_busclk0"; + fifo-depth = <256>; status = "disabled"; }; @@ -674,6 +675,7 @@ pinctrl-0 = <&spi1_bus>; clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; clock-names = "spi", "spi_busclk0"; + fifo-depth = <64>; status = "disabled"; }; @@ -690,6 +692,7 @@ pinctrl-0 = <&spi2_bus>; clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; clock-names = "spi", "spi_busclk0"; + fifo-depth = <64>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts index 9bbbdce9103a..bb019868b996 100644 --- a/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts @@ -185,7 +185,7 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { port { diff --git a/arch/arm/boot/dts/samsung/s5pv210.dtsi b/arch/arm/boot/dts/samsung/s5pv210.dtsi index ed560c9a3aa1..34e8a3d5efa5 100644 --- a/arch/arm/boot/dts/samsung/s5pv210.dtsi +++ b/arch/arm/boot/dts/samsung/s5pv210.dtsi @@ -72,7 +72,7 @@ #size-cells = <1>; ranges; - onenand: onenand@b0600000 { + onenand: nand-controller@b0600000 { compatible = "samsung,s5pv210-onenand"; reg = <0xb0600000 0x2000>, <0xb0000000 0x20000>, @@ -82,7 +82,7 @@ clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; clock-names = "bus", "onenand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -161,6 +161,7 @@ pinctrl-0 = <&spi0_bus>; #address-cells = <1>; #size-cells = <0>; + fifo-depth = <256>; status = "disabled"; }; @@ -177,6 +178,7 @@ pinctrl-0 = <&spi1_bus>; #address-cells = <1>; #size-cells = <0>; + fifo-depth = <64>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index 9fedd6776208..60d55516f723 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -29,13 +29,22 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ + stm32mp133c-prihmb.dtb \ + stm32mp135f-dhcor-dhsbc.dtb \ stm32mp135f-dk.dtb \ stm32mp151a-prtt1a.dtb \ stm32mp151a-prtt1c.dtb \ stm32mp151a-prtt1s.dtb \ stm32mp151a-dhcor-testbench.dtb \ + stm32mp151c-mecio1r0.dtb \ + stm32mp151c-mect1s.dtb \ + stm32mp151c-plyaqm.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp153c-dhcor-drc-compact.dtb \ + stm32mp153c-lxa-fairytux2-gen1.dtb \ + stm32mp153c-lxa-fairytux2-gen2.dtb \ + stm32mp153c-lxa-tac-gen3.dtb \ + stm32mp153c-mecio1r1.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ diff --git a/arch/arm/boot/dts/st/spear1310-evb.dts b/arch/arm/boot/dts/st/spear1310-evb.dts index 18191a87f07c..ad216571ba57 100644 --- a/arch/arm/boot/dts/st/spear1310-evb.dts +++ b/arch/arm/boot/dts/st/spear1310-evb.dts @@ -353,7 +353,6 @@ spi-max-frequency = <1000000>; spi-cpha; pl022,interface = <0>; - pl022,slave-tx-disable; pl022,com-mode = <0>; pl022,rx-level-trig = <0>; pl022,tx-level-trig = <0>; @@ -385,7 +384,6 @@ spi-cpol; spi-cpha; pl022,interface = <0>; - pl022,slave-tx-disable; pl022,com-mode = <0x2>; pl022,rx-level-trig = <0>; pl022,tx-level-trig = <0>; diff --git a/arch/arm/boot/dts/st/spear1340-evb.dts b/arch/arm/boot/dts/st/spear1340-evb.dts index cea624fc745c..9b515b21a633 100644 --- a/arch/arm/boot/dts/st/spear1340-evb.dts +++ b/arch/arm/boot/dts/st/spear1340-evb.dts @@ -446,7 +446,6 @@ spi-cpol; spi-cpha; pl022,interface = <0>; - pl022,slave-tx-disable; pl022,com-mode = <0x2>; pl022,rx-level-trig = <0>; pl022,tx-level-trig = <0>; @@ -461,7 +460,6 @@ spi-cpha; reg = <1>; pl022,interface = <0>; - pl022,slave-tx-disable; pl022,com-mode = <0>; pl022,rx-level-trig = <0>; pl022,tx-level-trig = <0>; diff --git a/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi index 31a86606beda..9a6304b7ab25 100644 --- a/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi @@ -454,6 +454,31 @@ }; }; + /* MC2 without feedback clock on A8 */ + mc2_a_2_default: mc2_a_2_default { + default_mux { + function = "mc2"; + groups = "mc2_a_2"; + }; + default_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + mc2_a_1_sleep: mc2_a_1_sleep { sleep_cfg1 { pins = "GPIO128_A5"; /* CLK */ @@ -478,6 +503,30 @@ ste,config = <&in_wkup_pdis>; }; }; + + mc2_a_2_sleep: mc2_a_2_sleep { + sleep_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; }; sdi4 { diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts index c623cc35c5ea..404d4ea9347b 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts @@ -544,6 +544,7 @@ touchscreen-size-y = <800>; pinctrl-names = "default"; pinctrl-0 = <&tsp_default>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; }; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts index 2355ca6e9ad6..40b0d92dfb15 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts @@ -451,13 +451,17 @@ no-sdio; no-sd; vmmc-supply = <&ldo_3v3_reg>; + vqmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; /* - * GPIO130 will be set to input no pull-up resulting in a resistor - * pulling the reset high and taking the memory out of reset. + * This muxing excludes the feedback clock on GPIO130 + * which is instead used for reset of the eMMC. + * GPIO130 will be set to input no pull-up resulting in + * a resistor pulling the reset high and taking the + * memory out of reset. */ - pinctrl-0 = <&mc2_a_1_default>; - pinctrl-1 = <&mc2_a_1_sleep>; + pinctrl-0 = <&mc2_a_2_default>; + pinctrl-1 = <&mc2_a_2_sleep>; status = "okay"; }; @@ -644,6 +648,7 @@ touchscreen-size-y = <800>; pinctrl-names = "default"; pinctrl-0 = <&tsp_default>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; }; }; @@ -677,14 +682,14 @@ sdi2 { /* * This will make the resistor mounted in R0.0 pull up - * the reset line and take the eMMC out of reset. On - * R0.4 variants, GPIO130 should be set in GPIO mode and - * pulled down. (Not connected.) + * the reset line and take the eMMC out of reset so set to + * GPIO input mode, no pull-up. On R0.4 variants, GPIO130 + * could be set in GPIO mode and pulled down. (Not connected.) */ - mc2_a_1_default { - default_cfg2 { - pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_nopull>; + mc2_a_2_default { + default_cfg3 { + pins = "GPIO130_C8"; /* RST_N */ + ste,config = <&gpio_in_nopull>; }; }; }; diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi index 29302e74aa1d..35a55aef7f4b 100644 --- a/arch/arm/boot/dts/st/stih407-family.dtsi +++ b/arch/arm/boot/dts/st/stih407-family.dtsi @@ -33,7 +33,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; @@ -52,8 +52,9 @@ clock-latency = <100000>; cpu0-supply = <&pwm_regulator>; st,syscfg = <&syscfg_core 0x8e0>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; @@ -66,6 +67,7 @@ 1200000 0 800000 0 500000 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/st/stih410-b2260.dts b/arch/arm/boot/dts/st/stih410-b2260.dts index 240b62040000..736b1e059b0a 100644 --- a/arch/arm/boot/dts/st/stih410-b2260.dts +++ b/arch/arm/boot/dts/st/stih410-b2260.dts @@ -206,5 +206,9 @@ sata1: sata@9b28000 { status = "okay"; }; + + gpu: gpu@9f00000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/st/stih410.dtsi b/arch/arm/boot/dts/st/stih410.dtsi index 29e95e9d3229..d56343f44fda 100644 --- a/arch/arm/boot/dts/st/stih410.dtsi +++ b/arch/arm/boot/dts/st/stih410.dtsi @@ -270,6 +270,7 @@ clock-names = "thermal"; clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; cec@94a087c { @@ -284,5 +285,39 @@ resets = <&softreset STIH407_LPM_SOFTRESET>; hdmi-phandle = <&sti_hdmi>; }; + + gpu: gpu@9f00000 { + compatible = "st,stih410-mali", "arm,mali-400"; + reg = <0x9f00000 0x10000>; + /* LIMA driver needs 2 clocks, use the same for both */ + clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>, + <&clk_s_c0_flexgen CLK_ICN_GPU>; + clock-names = "bus", "core"; + assigned-clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>; + assigned-clock-rates = <400000000>; + resets = <&softreset STIH407_GPU_SOFTRESET>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/st/stih418.dtsi b/arch/arm/boot/dts/st/stih418.dtsi index b35b9b7a7ccc..8fb8b3af5e49 100644 --- a/arch/arm/boot/dts/st/stih418.dtsi +++ b/arch/arm/boot/dts/st/stih418.dtsi @@ -6,23 +6,26 @@ #include "stih418-clock.dtsi" #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" +#include <dt-bindings/thermal/thermal.h> / { cpus { #address-cells = <1>; #size-cells = <0>; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + #cooling-cells = <2>; }; }; @@ -44,6 +47,38 @@ reset-names = "global", "port"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + + thermal-sensors = <&thermal>; + + trips { + cpu_crit: cpu-crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { rng11: rng@8a8a000 { status = "disabled"; @@ -107,12 +142,13 @@ assigned-clock-rates = <200000000>; }; - thermal@91a0000 { + thermal: thermal@91a0000 { compatible = "st,stih407-thermal"; reg = <0x91a0000 0x28>; clock-names = "thermal"; clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/st/stm32f429.dtsi b/arch/arm/boot/dts/st/stm32f429.dtsi index 8efcda9ef8ae..ad91b74ddd0d 100644 --- a/arch/arm/boot/dts/st/stm32f429.dtsi +++ b/arch/arm/boot/dts/st/stm32f429.dtsi @@ -579,6 +579,7 @@ syscfg: syscon@40013800 { compatible = "st,stm32-syscfg", "syscon"; reg = <0x40013800 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SYSCFG)>; }; exti: interrupt-controller@40013c00 { diff --git a/arch/arm/boot/dts/st/stm32f746-disco.dts b/arch/arm/boot/dts/st/stm32f746-disco.dts index 087de6f09629..b57dbdce2f40 100644 --- a/arch/arm/boot/dts/st/stm32f746-disco.dts +++ b/arch/arm/boot/dts/st/stm32f746-disco.dts @@ -78,6 +78,24 @@ serial0 = &usart1; }; + leds { + compatible = "gpio-leds"; + led-usr { + gpios = <&gpioi 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + button-0 { + label = "User"; + linux,code = <KEY_HOME>; + gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>; + }; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi index 65c72b6fcc83..2537b3d47e6f 100644 --- a/arch/arm/boot/dts/st/stm32f746.dtsi +++ b/arch/arm/boot/dts/st/stm32f746.dtsi @@ -257,23 +257,6 @@ status = "disabled"; }; - can3: can@40003400 { - compatible = "st,stm32f4-bxcan"; - reg = <0x40003400 0x200>; - interrupts = <104>, <105>, <106>, <107>; - interrupt-names = "tx", "rx0", "rx1", "sce"; - resets = <&rcc STM32F7_APB1_RESET(CAN3)>; - clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; - st,gcan = <&gcan3>; - status = "disabled"; - }; - - gcan3: gcan@40003600 { - compatible = "st,stm32f4-gcan", "syscon"; - reg = <0x40003600 0x200>; - clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; - }; - spi2: spi@40003800 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts index 52c5baf58ab9..535cfdc4681c 100644 --- a/arch/arm/boot/dts/st/stm32f769-disco.dts +++ b/arch/arm/boot/dts/st/stm32f769-disco.dts @@ -79,13 +79,16 @@ leds { compatible = "gpio-leds"; - led-green { + led-usr2 { gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - led-red { + led-usr1 { gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>; }; + led-usr3 { + gpios = <&gpioa 12 GPIO_ACTIVE_HIGH>; + }; }; gpio-keys { diff --git a/arch/arm/boot/dts/st/stm32f769.dtsi b/arch/arm/boot/dts/st/stm32f769.dtsi index 4e7d9032149c..e8cbb99e81a6 100644 --- a/arch/arm/boot/dts/st/stm32f769.dtsi +++ b/arch/arm/boot/dts/st/stm32f769.dtsi @@ -7,6 +7,23 @@ / { soc { + can3: can@40003400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40003400 0x200>; + interrupts = <104>, <105>, <106>, <107>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN3)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + st,gcan = <&gcan3>; + status = "disabled"; + }; + + gcan3: gcan@40003600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40003600 0x200>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + }; + dsi: dsi@40016c00 { compatible = "st,stm32-dsi"; reg = <0x40016c00 0x800>; diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi index 27e0c3826789..a422b32d71d1 100644 --- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi @@ -6,6 +6,14 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { + /omit-if-no-ref/ + adc1_pins_a: adc1-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */ + }; + }; + + /omit-if-no-ref/ adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 { pins { pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ @@ -13,6 +21,253 @@ }; }; + /omit-if-no-ref/ + adc1_usb_cc_pins_b: adc1-usb-cc-pins-1 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP2 */ + <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1_INP11 */ + }; + }; + + /omit-if-no-ref/ + dcmipp_pins_a: dcmi-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('G', 9, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('B', 7, AF14)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('D', 0, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('G', 10, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 4, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('D', 11, AF14)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 14, AF13)>;/* DCMI_D7 */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + dcmipp_sleep_pins_a: dcmi-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('G', 9, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('D', 0, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('G', 10, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 4, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('D', 11, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 14, ANALOG)>;/* DCMI_D7 */ + }; + }; + + /omit-if-no-ref/ + eth1_rgmii_pins_a: eth1-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 5, AF10)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 7, AF11)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('D', 7, AF10)>; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('A', 7, ANALOG)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('D', 7, ANALOG)>; /* ETH_RGMII_RX_CLK */ + }; + }; + + /omit-if-no-ref/ + eth1_rmii_pins_a: eth1-rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */ + }; + }; + + /omit-if-no-ref/ + eth2_rgmii_pins_a: eth2-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 11, AF10)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('G', 1, AF10)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 6, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('F', 6, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('G', 3, AF10)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('E', 2, AF10)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF12)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('A', 8, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 12, AF11)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('H', 11, AF11)>; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */ + }; + }; + + /omit-if-no-ref/ + eth2_rmii_pins_a: eth2-rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */ + <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */ + <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */ + }; + }; + + /omit-if-no-ref/ + goodix_pins_a: goodix-0 { + /* + * touchscreen reset needs to be configured + * via the pinctrl not the driver (a pull-down resistor + * has been soldered onto the reset line which forces + * the touchscreen to reset state). + */ + pins1 { + pinmux = <STM32_PINMUX('H', 2, GPIO)>; + output-high; + bias-pull-up; + }; + /* + * Interrupt line must have a pull-down resistor + * in order to freeze the i2c address at 0x5D + */ + pins2 { + pinmux = <STM32_PINMUX('F', 5, GPIO)>; + bias-pull-down; + }; + }; + + /omit-if-no-ref/ i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -23,6 +278,7 @@ }; }; + /omit-if-no-ref/ i2c1_sleep_pins_a: i2c1-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ @@ -30,6 +286,7 @@ }; }; + /omit-if-no-ref/ i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */ @@ -40,6 +297,7 @@ }; }; + /omit-if-no-ref/ i2c5_sleep_pins_a: i2c5-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */ @@ -47,6 +305,129 @@ }; }; + /omit-if-no-ref/ + i2c5_pins_b: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + i2c5_sleep_pins_b: i2c5-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */ + }; + }; + + /omit-if-no-ref/ + ltdc_pins_a: ltdc-0 { + pins { + pinmux = <STM32_PINMUX('D', 9, AF13)>, /* LCD_CLK */ + <STM32_PINMUX('C', 6, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('G', 4, AF11)>, /* LCD_VSYNC */ + <STM32_PINMUX('H', 9, AF11)>, /* LCD_DE */ + <STM32_PINMUX('G', 7, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('B', 12, AF13)>, /* LCD_R3 */ + <STM32_PINMUX('D', 14, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('E', 7, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('E', 13, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 9, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('F', 3, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('D', 5, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('G', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('C', 7, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('A', 15, AF11)>, /* LCD_G7 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('F', 2, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('H', 14, AF11)>, /* LCD_B4 */ + <STM32_PINMUX('E', 0, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 6, AF7)>, /* LCD_B6 */ + <STM32_PINMUX('F', 1, AF13)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + ltdc_sleep_pins_a: ltdc-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('C', 6, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('G', 4, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('B', 12, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('D', 14, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('F', 3, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('G', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('C', 7, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('A', 15, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('F', 2, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('E', 0, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 6, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('F', 1, ANALOG)>; /* LCD_B7 */ + }; + }; + + /omit-if-no-ref/ + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 10, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 10, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('D', 0, ANALOG)>; /* CAN1_RX */ + }; + }; + + /omit-if-no-ref/ + m_can2_pins_a: m-can2-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 0, AF9)>; /* CAN2_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 0, AF9)>; /* CAN2_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + m_can2_sleep_pins_a: m_can2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 0, ANALOG)>, /* CAN2_TX */ + <STM32_PINMUX('E', 0, ANALOG)>; /* CAN2_RX */ + }; + }; + + /omit-if-no-ref/ mcp23017_pins_a: mcp23017-0 { pins { pinmux = <STM32_PINMUX('G', 12, GPIO)>; @@ -54,6 +435,7 @@ }; }; + /omit-if-no-ref/ pwm3_pins_a: pwm3-0 { pins { pinmux = <STM32_PINMUX('B', 1, AF2)>; /* TIM3_CH4 */ @@ -63,12 +445,14 @@ }; }; + /omit-if-no-ref/ pwm3_sleep_pins_a: pwm3-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 1, ANALOG)>; /* TIM3_CH4 */ }; }; + /omit-if-no-ref/ pwm4_pins_a: pwm4-0 { pins { pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ @@ -78,12 +462,31 @@ }; }; + /omit-if-no-ref/ pwm4_sleep_pins_a: pwm4-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ }; }; + /omit-if-no-ref/ + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */ + }; + }; + + /omit-if-no-ref/ pwm8_pins_a: pwm8-0 { pins { pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */ @@ -93,12 +496,31 @@ }; }; + /omit-if-no-ref/ pwm8_sleep_pins_a: pwm8-sleep-0 { pins { pinmux = <STM32_PINMUX('E', 5, ANALOG)>; /* TIM8_CH3 */ }; }; + /omit-if-no-ref/ + pwm13_pins_a: pwm13-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, AF9)>; /* TIM13_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm13_sleep_pins_a: pwm13-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, ANALOG)>; /* TIM13_CH1 */ + }; + }; + + /omit-if-no-ref/ pwm14_pins_a: pwm14-0 { pins { pinmux = <STM32_PINMUX('F', 9, AF9)>; /* TIM14_CH1 */ @@ -108,12 +530,114 @@ }; }; + /omit-if-no-ref/ pwm14_sleep_pins_a: pwm14-sleep-0 { pins { pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM14_CH1 */ }; }; + /omit-if-no-ref/ + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + /omit-if-no-ref/ + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + /omit-if-no-ref/ + qspi_bk1_pins_a: qspi-bk1-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('D', 11, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('H', 7, AF13)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + /omit-if-no-ref/ + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('D', 11, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('H', 7, ANALOG)>; /* QSPI_BK1_IO3 */ + }; + }; + + /omit-if-no-ref/ + qspi_cs1_pins_a: qspi-cs1-0 { + pins { + pinmux = <STM32_PINMUX('B', 2, AF9)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + /omit-if-no-ref/ + qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 2, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + /omit-if-no-ref/ + rtc_rsvd_pins_a: rtc-rsvd-0 { + pins { + pinmux = <STM32_PINMUX('I', 1, ANALOG)>; /* RTC_OUT2_RMP */ + }; + }; + + /omit-if-no-ref/ + sai1a_pins_a: sai1a-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */ + <STM32_PINMUX('D', 6, AF6)>, /* SAI1_SD_A */ + <STM32_PINMUX('E', 11, AF6)>; /* SAI1_FS_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + /omit-if-no-ref/ + sai1a_sleep_pins_a: sai1a-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* SAI1_SCK_A */ + <STM32_PINMUX('D', 6, ANALOG)>, /* SAI1_SD_A */ + <STM32_PINMUX('E', 11, ANALOG)>; /* SAI1_FS_A */ + }; + }; + + /omit-if-no-ref/ + sai1b_pins_a: sai1b-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, AF6)>; /* SAI1_SD_B */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + sai1b_sleep_pins_a: sai1b-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* SAI1_SD_B */ + }; + }; + + /omit-if-no-ref/ sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -127,6 +651,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { pins1 { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -145,6 +670,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ @@ -156,6 +682,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_clk_pins_a: sdmmc1-clk-0 { pins { pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ @@ -165,6 +692,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_pins_a: sdmmc2-b4-0 { pins { pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ @@ -178,6 +706,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ @@ -196,6 +725,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ @@ -207,6 +737,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_clk_pins_a: sdmmc2-clk-0 { pins { pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */ @@ -216,6 +747,80 @@ }; }; + /omit-if-no-ref/ + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, AF10)>, /* SDMMC2_D4 */ + <STM32_PINMUX('B', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + /omit-if-no-ref/ + spi2_pins_a: spi2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF6)>, /* SPI2_SCK */ + <STM32_PINMUX('H', 10, AF6)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + spi2_sleep_pins_a: spi2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* SPI2_SCK */ + <STM32_PINMUX('B', 5, ANALOG)>, /* SPI2_MISO */ + <STM32_PINMUX('H', 10, ANALOG)>; /* SPI2_MOSI */ + }; + }; + + /omit-if-no-ref/ + spi3_pins_a: spi3-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF6)>, /* SPI3_SCK */ + <STM32_PINMUX('F', 1, AF5)>; /* SPI3_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('D', 4, AF5)>; /* SPI3_MISO */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + spi3_sleep_pins_a: spi3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* SPI3_SCK */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SPI3_MISO */ + <STM32_PINMUX('F', 1, ANALOG)>; /* SPI3_MOSI */ + }; + }; + + /omit-if-no-ref/ spi5_pins_a: spi5-0 { pins1 { pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */ @@ -231,6 +836,7 @@ }; }; + /omit-if-no-ref/ spi5_sleep_pins_a: spi5-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */ @@ -239,6 +845,7 @@ }; }; + /omit-if-no-ref/ stm32g0_intn_pins_a: stm32g0-intn-0 { pins { pinmux = <STM32_PINMUX('I', 2, GPIO)>; @@ -246,6 +853,7 @@ }; }; + /omit-if-no-ref/ uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */ @@ -259,6 +867,7 @@ }; }; + /omit-if-no-ref/ uart4_idle_pins_a: uart4-idle-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */ @@ -269,6 +878,7 @@ }; }; + /omit-if-no-ref/ uart4_sleep_pins_a: uart4-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */ @@ -276,6 +886,84 @@ }; }; + /omit-if-no-ref/ + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + uart4_idle_pins_b: uart4-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + uart4_sleep_pins_b: uart4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + /omit-if-no-ref/ + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF8)>, /* UART7_TX */ + <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 10, AF7)>, /* UART7_RX */ + <STM32_PINMUX('G', 7, AF8)>; /* UART7_CTS_NSS */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart7_idle_pins_a: uart7-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */ + <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart7_sleep_pins_a: uart7-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */ + <STM32_PINMUX('B', 12, ANALOG)>, /* UART7_RTS */ + <STM32_PINMUX('E', 10, ANALOG)>, /* UART7_RX */ + <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */ + }; + }; + + /omit-if-no-ref/ uart8_pins_a: uart8-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ @@ -289,6 +977,7 @@ }; }; + /omit-if-no-ref/ uart8_idle_pins_a: uart8-idle-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */ @@ -299,6 +988,7 @@ }; }; + /omit-if-no-ref/ uart8_sleep_pins_a: uart8-sleep-0 { pins { pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */ @@ -306,6 +996,7 @@ }; }; + /omit-if-no-ref/ usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */ @@ -321,6 +1012,7 @@ }; }; + /omit-if-no-ref/ usart1_idle_pins_a: usart1-idle-0 { pins1 { pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ @@ -338,6 +1030,7 @@ }; }; + /omit-if-no-ref/ usart1_sleep_pins_a: usart1-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ @@ -347,6 +1040,40 @@ }; }; + /omit-if-no-ref/ + usart1_pins_b: usart1-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + usart1_idle_pins_b: usart1-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* USART1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + usart1_sleep_pins_b: usart1-sleep-1 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('D', 14, ANALOG)>; /* USART1_RX */ + }; + }; + + /omit-if-no-ref/ usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */ @@ -362,6 +1089,7 @@ }; }; + /omit-if-no-ref/ usart2_idle_pins_a: usart2-idle-0 { pins1 { pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ @@ -379,6 +1107,7 @@ }; }; + /omit-if-no-ref/ usart2_sleep_pins_a: usart2-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ @@ -387,4 +1116,48 @@ <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ }; }; + + /omit-if-no-ref/ + usart2_pins_b: usart2-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, AF1)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, AF3)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + usart2_idle_pins_b: usart2-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + usart2_sleep_pins_b: usart2-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; }; diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index 3900f32da797..8512a6e46b33 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -100,6 +100,31 @@ always-on; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&dts>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <85000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu-crit { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -261,6 +286,11 @@ dma-names = "up"; status = "disabled"; + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + timer@5 { compatible = "st,stm32h7-timer-trigger"; reg = <5>; @@ -281,6 +311,11 @@ dma-names = "up"; status = "disabled"; + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + timer@6 { compatible = "st,stm32h7-timer-trigger"; reg = <6>; @@ -745,340 +780,6 @@ dma-channels = <16>; }; - adc_2: adc@48004000 { - compatible = "st,stm32mp13-adc-core"; - reg = <0x48004000 0x400>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc ADC2>, <&rcc ADC2_K>; - clock-names = "bus", "adc"; - interrupt-controller; - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - adc2: adc@0 { - compatible = "st,stm32mp13-adc"; - #io-channel-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0>; - interrupt-parent = <&adc_2>; - interrupts = <0>; - dmas = <&dmamux1 10 0x400 0x80000001>; - dma-names = "rx"; - status = "disabled"; - - channel@13 { - reg = <13>; - label = "vrefint"; - }; - channel@14 { - reg = <14>; - label = "vddcore"; - }; - channel@16 { - reg = <16>; - label = "vddcpu"; - }; - channel@17 { - reg = <17>; - label = "vddq_ddr"; - }; - }; - }; - - usbotg_hs: usb@49000000 { - compatible = "st,stm32mp15-hsotg", "snps,dwc2"; - reg = <0x49000000 0x40000>; - clocks = <&rcc USBO_K>; - clock-names = "otg"; - resets = <&rcc USBO_R>; - reset-names = "dwc2"; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - g-rx-fifo-size = <512>; - g-np-tx-fifo-size = <32>; - g-tx-fifo-size = <256 16 16 16 16 16 16 16>; - dr_mode = "otg"; - otg-rev = <0x200>; - usb33d-supply = <&scmi_usb33>; - status = "disabled"; - }; - - usart1: serial@4c000000 { - compatible = "st,stm32h7-uart"; - reg = <0x4c000000 0x400>; - interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc USART1_K>; - resets = <&rcc USART1_R>; - wakeup-source; - dmas = <&dmamux1 41 0x400 0x5>, - <&dmamux1 42 0x400 0x1>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - usart2: serial@4c001000 { - compatible = "st,stm32h7-uart"; - reg = <0x4c001000 0x400>; - interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc USART2_K>; - resets = <&rcc USART2_R>; - wakeup-source; - dmas = <&dmamux1 43 0x400 0x5>, - <&dmamux1 44 0x400 0x1>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2s4: audio-controller@4c002000 { - compatible = "st,stm32h7-i2s"; - reg = <0x4c002000 0x400>; - #sound-dai-cells = <0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 83 0x400 0x01>, - <&dmamux1 84 0x400 0x01>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - spi4: spi@4c002000 { - compatible = "st,stm32h7-spi"; - reg = <0x4c002000 0x400>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI4_K>; - resets = <&rcc SPI4_R>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmamux1 83 0x400 0x01>, - <&dmamux1 84 0x400 0x01>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - spi5: spi@4c003000 { - compatible = "st,stm32h7-spi"; - reg = <0x4c003000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI5_K>; - resets = <&rcc SPI5_R>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmamux1 85 0x400 0x01>, - <&dmamux1 86 0x400 0x01>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c3: i2c@4c004000 { - compatible = "st,stm32mp13-i2c"; - reg = <0x4c004000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C3_K>; - resets = <&rcc I2C3_R>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmamux1 73 0x400 0x1>, - <&dmamux1 74 0x400 0x1>; - dma-names = "rx", "tx"; - st,syscfg-fmp = <&syscfg 0x4 0x4>; - i2c-analog-filter; - status = "disabled"; - }; - - i2c4: i2c@4c005000 { - compatible = "st,stm32mp13-i2c"; - reg = <0x4c005000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C4_K>; - resets = <&rcc I2C4_R>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmamux1 75 0x400 0x1>, - <&dmamux1 76 0x400 0x1>; - dma-names = "rx", "tx"; - st,syscfg-fmp = <&syscfg 0x4 0x8>; - i2c-analog-filter; - status = "disabled"; - }; - - i2c5: i2c@4c006000 { - compatible = "st,stm32mp13-i2c"; - reg = <0x4c006000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C5_K>; - resets = <&rcc I2C5_R>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmamux1 115 0x400 0x1>, - <&dmamux1 116 0x400 0x1>; - dma-names = "rx", "tx"; - st,syscfg-fmp = <&syscfg 0x4 0x10>; - i2c-analog-filter; - status = "disabled"; - }; - - timers12: timer@4c007000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x4c007000 0x400>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM12_K>; - clock-names = "int"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@11 { - compatible = "st,stm32h7-timer-trigger"; - reg = <11>; - status = "disabled"; - }; - }; - - timers13: timer@4c008000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x4c008000 0x400>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM13_K>; - clock-names = "int"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@12 { - compatible = "st,stm32h7-timer-trigger"; - reg = <12>; - status = "disabled"; - }; - }; - - timers14: timer@4c009000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x4c009000 0x400>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM14_K>; - clock-names = "int"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@13 { - compatible = "st,stm32h7-timer-trigger"; - reg = <13>; - status = "disabled"; - }; - }; - - timers15: timer@4c00a000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x4c00a000 0x400>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM15_K>; - clock-names = "int"; - dmas = <&dmamux1 105 0x400 0x1>, - <&dmamux1 106 0x400 0x1>, - <&dmamux1 107 0x400 0x1>, - <&dmamux1 108 0x400 0x1>; - dma-names = "ch1", "up", "trig", "com"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@14 { - compatible = "st,stm32h7-timer-trigger"; - reg = <14>; - status = "disabled"; - }; - }; - - timers16: timer@4c00b000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x4c00b000 0x400>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM16_K>; - clock-names = "int"; - dmas = <&dmamux1 109 0x400 0x1>, - <&dmamux1 110 0x400 0x1>; - dma-names = "ch1", "up"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@15 { - compatible = "st,stm32h7-timer-trigger"; - reg = <15>; - status = "disabled"; - }; - }; - - timers17: timer@4c00c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x4c00c000 0x400>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM17_K>; - clock-names = "int"; - dmas = <&dmamux1 111 0x400 0x1>, - <&dmamux1 112 0x400 0x1>; - dma-names = "ch1", "up"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@16 { - compatible = "st,stm32h7-timer-trigger"; - reg = <16>; - status = "disabled"; - }; - }; - rcc: rcc@50000000 { compatible = "st,stm32mp13-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -1092,80 +793,113 @@ <&scmi_clk CK_SCMI_LSI>; }; - exti: interrupt-controller@5000d000 { - compatible = "st,stm32mp13-exti", "syscon"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000d000 0x400>; - }; - - syscfg: syscon@50020000 { - compatible = "st,stm32mp157-syscfg", "syscon"; - reg = <0x50020000 0x400>; - clocks = <&rcc SYSCFG>; - }; - - lptimer2: timer@50021000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-lptimer"; - reg = <0x50021000 0x400>; - interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc LPTIM2_K>; - clock-names = "mux"; - wakeup-source; + pwr_regulators: pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; status = "disabled"; - pwm { - compatible = "st,stm32-pwm-lp"; - #pwm-cells = <3>; - status = "disabled"; - }; - - trigger@1 { - compatible = "st,stm32-lptimer-trigger"; - reg = <1>; - status = "disabled"; + reg11: reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; }; - counter { - compatible = "st,stm32-lptimer-counter"; - status = "disabled"; + reg18: reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - timer { - compatible = "st,stm32-lptimer-timer"; - status = "disabled"; + usb33: usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; }; - lptimer3: timer@50022000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-lptimer"; - reg = <0x50022000 0x400>; - interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc LPTIM3_K>; - clock-names = "mux"; - wakeup-source; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm-lp"; - #pwm-cells = <3>; - status = "disabled"; - }; - - trigger@2 { - compatible = "st,stm32-lptimer-trigger"; - reg = <2>; - status = "disabled"; - }; + exti: interrupt-controller@5000d000 { + compatible = "st,stm32mp1-exti", "syscon"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000d000 0x400>; + interrupts-extended = + <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */ + <&intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */ + <&intc GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0>, /* EXTI_20 */ + <&intc GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */ + <&intc GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, /* EXTI_40 */ + <0>, + <0>, + <0>, + <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <&intc GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <&intc GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */ + <0>, + <&intc GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, /* EXTI_60 */ + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&intc GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <&intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* EXTI_70 */ + }; - timer { - compatible = "st,stm32-lptimer-timer"; - status = "disabled"; - }; + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + clocks = <&rcc SYSCFG>; }; lptimer4: timer@50023000 { @@ -1210,22 +944,13 @@ }; }; - hash: hash@54003000 { - compatible = "st,stm32mp13-hash"; - reg = <0x54003000 0x400>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc HASH1>; - resets = <&rcc HASH1_R>; - dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>; - dma-names = "in"; - status = "disabled"; - }; - - rng: rng@54004000 { - compatible = "st,stm32mp13-rng"; - reg = <0x54004000 0x400>; - clocks = <&rcc RNG1_K>; - resets = <&rcc RNG1_R>; + dts: thermal@50028000 { + compatible = "st,stm32-thermal"; + reg = <0x50028000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc DTS>; + clock-names = "pclk"; + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -1239,82 +964,6 @@ dma-requests = <48>; }; - fmc: memory-controller@58002000 { - compatible = "st,stm32mp1-fmc2-ebi"; - reg = <0x58002000 0x1000>; - ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ - <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ - <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ - <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ - <4 0 0x80000000 0x10000000>; /* NAND */ - #address-cells = <2>; - #size-cells = <1>; - clocks = <&rcc FMC_K>; - resets = <&rcc FMC_R>; - status = "disabled"; - - nand-controller@4,0 { - compatible = "st,stm32mp1-fmc2-nfc"; - reg = <4 0x00000000 0x1000>, - <4 0x08010000 0x1000>, - <4 0x08020000 0x1000>, - <4 0x01000000 0x1000>, - <4 0x09010000 0x1000>, - <4 0x09020000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>, - <&mdma 24 0x2 0x12000a08 0x0 0x0>, - <&mdma 25 0x2 0x12000a0a 0x0 0x0>; - dma-names = "tx", "rx", "ecc"; - status = "disabled"; - }; - }; - - qspi: spi@58003000 { - compatible = "st,stm32f469-qspi"; - reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; - reg-names = "qspi", "qspi_mm"; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>, - <&mdma 26 0x2 0x10100008 0x0 0x0>; - dma-names = "tx", "rx"; - clocks = <&rcc QSPI_K>; - resets = <&rcc QSPI_R>; - status = "disabled"; - }; - - sdmmc1: mmc@58005000 { - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x20253180>; - reg = <0x58005000 0x1000>, <0x58006000 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SDMMC1_K>; - clock-names = "apb_pclk"; - resets = <&rcc SDMMC1_R>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <130000000>; - status = "disabled"; - }; - - sdmmc2: mmc@58007000 { - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x20253180>; - reg = <0x58007000 0x1000>, <0x58008000 0x1000>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SDMMC2_K>; - clock-names = "apb_pclk"; - resets = <&rcc SDMMC2_R>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <130000000>; - status = "disabled"; - }; - crc1: crc@58009000 { compatible = "st,stm32f7-crc"; reg = <0x58009000 0x400>; @@ -1349,29 +998,6 @@ status = "disabled"; }; - usbphyc: usbphyc@5a006000 { - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <0>; - compatible = "st,stm32mp1-usbphyc"; - reg = <0x5a006000 0x1000>; - clocks = <&rcc USBPHY_K>; - resets = <&rcc USBPHY_R>; - vdda1v1-supply = <&scmi_reg11>; - vdda1v8-supply = <&scmi_reg18>; - status = "disabled"; - - usbphyc_port0: usb-phy@0 { - #phy-cells = <0>; - reg = <0>; - }; - - usbphyc_port1: usb-phy@1 { - #phy-cells = <1>; - reg = <1>; - }; - }; - rtc: rtc@5c004000 { compatible = "st,stm32mp1-rtc"; reg = <0x5c004000 0x400>; @@ -1398,6 +1024,623 @@ ts_cal2: calib@5e { reg = <0x5e 0x2>; }; + ethernet_mac1_address: mac1@e4 { + reg = <0xe4 0x6>; + }; + ethernet_mac2_address: mac2@ea { + reg = <0xea 0x6>; + }; + }; + + etzpc: bus@5c007000 { + compatible = "st,stm32-etzpc", "simple-bus"; + reg = <0x5c007000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + adc_2: adc@48004000 { + compatible = "st,stm32mp13-adc-core"; + reg = <0x48004000 0x400>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC2>, <&rcc ADC2_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&etzpc 33>; + status = "disabled"; + + adc2: adc@0 { + compatible = "st,stm32mp13-adc"; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + interrupt-parent = <&adc_2>; + interrupts = <0>; + dmas = <&dmamux1 10 0x400 0x80000001>; + dma-names = "rx"; + status = "disabled"; + + channel@13 { + reg = <13>; + label = "vrefint"; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + }; + channel@16 { + reg = <16>; + label = "vddcpu"; + }; + channel@17 { + reg = <17>; + label = "vddq_ddr"; + }; + }; + }; + + usbotg_hs: usb@49000000 { + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; + reg = <0x49000000 0x40000>; + clocks = <&rcc USBO_K>; + clock-names = "otg"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 16 16 16 16 16 16 16>; + dr_mode = "otg"; + otg-rev = <0x200>; + usb33d-supply = <&scmi_usb33>; + access-controllers = <&etzpc 34>; + status = "disabled"; + }; + + usart1: serial@4c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c000000 0x400>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART1_K>; + resets = <&rcc USART1_R>; + wakeup-source; + dmas = <&dmamux1 41 0x400 0x5>, + <&dmamux1 42 0x400 0x1>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 16>; + status = "disabled"; + }; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 17>; + status = "disabled"; + }; + + i2s4: audio-controller@4c002000 { + compatible = "st,stm32h7-i2s"; + reg = <0x4c002000 0x400>; + #sound-dai-cells = <0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 83 0x400 0x01>, + <&dmamux1 84 0x400 0x01>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 13>; + status = "disabled"; + }; + + spi4: spi@4c002000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c002000 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 83 0x400 0x01>, + <&dmamux1 84 0x400 0x01>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 18>; + status = "disabled"; + }; + + spi5: spi@4c003000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c003000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 85 0x400 0x01>, + <&dmamux1 86 0x400 0x01>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 19>; + status = "disabled"; + }; + + i2c3: i2c@4c004000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c004000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C3_K>; + resets = <&rcc I2C3_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 73 0x400 0x1>, + <&dmamux1 74 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x4>; + i2c-analog-filter; + access-controllers = <&etzpc 20>; + status = "disabled"; + }; + + i2c4: i2c@4c005000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c005000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C4_K>; + resets = <&rcc I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 75 0x400 0x1>, + <&dmamux1 76 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x8>; + i2c-analog-filter; + access-controllers = <&etzpc 21>; + status = "disabled"; + }; + + i2c5: i2c@4c006000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c006000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C5_K>; + resets = <&rcc I2C5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 115 0x400 0x1>, + <&dmamux1 116 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x10>; + i2c-analog-filter; + access-controllers = <&etzpc 22>; + status = "disabled"; + }; + + timers12: timer@4c007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c007000 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM12_K>; + clock-names = "int"; + access-controllers = <&etzpc 23>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32h7-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timer@4c008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c008000 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM13_K>; + clock-names = "int"; + access-controllers = <&etzpc 24>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@12 { + compatible = "st,stm32h7-timer-trigger"; + reg = <12>; + status = "disabled"; + }; + }; + + timers14: timer@4c009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c009000 0x400>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM14_K>; + clock-names = "int"; + access-controllers = <&etzpc 25>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@13 { + compatible = "st,stm32h7-timer-trigger"; + reg = <13>; + status = "disabled"; + }; + }; + + timers15: timer@4c00a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c00a000 0x400>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM15_K>; + clock-names = "int"; + dmas = <&dmamux1 105 0x400 0x1>, + <&dmamux1 106 0x400 0x1>, + <&dmamux1 107 0x400 0x1>, + <&dmamux1 108 0x400 0x1>; + dma-names = "ch1", "up", "trig", "com"; + access-controllers = <&etzpc 26>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@14 { + compatible = "st,stm32h7-timer-trigger"; + reg = <14>; + status = "disabled"; + }; + }; + + timers16: timer@4c00b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c00b000 0x400>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM16_K>; + clock-names = "int"; + dmas = <&dmamux1 109 0x400 0x1>, + <&dmamux1 110 0x400 0x1>; + dma-names = "ch1", "up"; + access-controllers = <&etzpc 27>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@15 { + compatible = "st,stm32h7-timer-trigger"; + reg = <15>; + status = "disabled"; + }; + }; + + timers17: timer@4c00c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c00c000 0x400>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM17_K>; + clock-names = "int"; + dmas = <&dmamux1 111 0x400 0x1>, + <&dmamux1 112 0x400 0x1>; + dma-names = "ch1", "up"; + access-controllers = <&etzpc 28>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@16 { + compatible = "st,stm32h7-timer-trigger"; + reg = <16>; + status = "disabled"; + }; + }; + + lptimer2: timer@50021000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50021000 0x400>; + interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM2_K>; + clock-names = "mux"; + wakeup-source; + access-controllers = <&etzpc 1>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@1 { + compatible = "st,stm32-lptimer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + status = "disabled"; + }; + }; + + lptimer3: timer@50022000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50022000 0x400>; + interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM3_K>; + clock-names = "mux"; + wakeup-source; + access-controllers = <&etzpc 2>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@2 { + compatible = "st,stm32-lptimer-trigger"; + reg = <2>; + status = "disabled"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + status = "disabled"; + }; + }; + + hash: hash@54003000 { + compatible = "st,stm32mp13-hash"; + reg = <0x54003000 0x400>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc HASH1>; + resets = <&rcc HASH1_R>; + dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>; + dma-names = "in"; + access-controllers = <&etzpc 41>; + status = "disabled"; + }; + + rng: rng@54004000 { + compatible = "st,stm32mp13-rng"; + reg = <0x54004000 0x400>; + clocks = <&rcc RNG1_K>; + resets = <&rcc RNG1_R>; + access-controllers = <&etzpc 40>; + status = "disabled"; + }; + + fmc: memory-controller@58002000 { + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + #address-cells = <2>; + #size-cells = <1>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + access-controllers = <&etzpc 54>; + status = "disabled"; + + nand-controller@4,0 { + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>, + <&mdma 24 0x2 0x12000a08 0x0 0x0>, + <&mdma 25 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; + }; + + qspi: spi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>, + <&mdma 26 0x2 0x10100008 0x0 0x0>; + dma-names = "tx", "rx"; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + access-controllers = <&etzpc 55>; + status = "disabled"; + }; + + sdmmc1: mmc@58005000 { + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x20253180>; + reg = <0x58005000 0x1000>, <0x58006000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SDMMC1_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC1_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <130000000>; + access-controllers = <&etzpc 50>; + status = "disabled"; + }; + + sdmmc2: mmc@58007000 { + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x20253180>; + reg = <0x58007000 0x1000>, <0x58008000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SDMMC2_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC2_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <130000000>; + access-controllers = <&etzpc 51>; + status = "disabled"; + }; + + ethernet1: ethernet@5800a000 { + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <&exti 68 1>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETH1MAC>, + <&rcc ETH1TX>, + <&rcc ETH1RX>, + <&rcc ETH1STP>, + <&rcc ETH1CK_K>; + st,syscon = <&syscfg 0x4 0xff0000>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_1>; + snps,tso; + access-controllers = <&etzpc 48>; + status = "disabled"; + + stmmac_axi_config_1: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; + + usbphyc: usbphyc@5a006000 { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "st,stm32mp1-usbphyc"; + reg = <0x5a006000 0x1000>; + clocks = <&rcc USBPHY_K>; + resets = <&rcc USBPHY_R>; + vdda1v1-supply = <&scmi_reg11>; + vdda1v8-supply = <&scmi_reg18>; + access-controllers = <&etzpc 5>; + status = "disabled"; + + usbphyc_port0: usb-phy@0 { + #phy-cells = <0>; + reg = <0>; + }; + + usbphyc_port1: usb-phy@1 { + #phy-cells = <1>; + reg = <1>; + }; + }; }; /* diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi index df451c3c2a26..73e470019ce4 100644 --- a/arch/arm/boot/dts/st/stm32mp133.dtsi +++ b/arch/arm/boot/dts/st/stm32mp133.dtsi @@ -33,36 +33,70 @@ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; + }; +}; - adc_1: adc@48003000 { - compatible = "st,stm32mp13-adc-core"; - reg = <0x48003000 0x400>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc ADC1>, <&rcc ADC1_K>; - clock-names = "bus", "adc"; - interrupt-controller; - #interrupt-cells = <1>; +&etzpc { + adc_1: adc@48003000 { + compatible = "st,stm32mp13-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC1>, <&rcc ADC1_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&etzpc 32>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32mp13-adc"; + #io-channel-cells = <1>; #address-cells = <1>; #size-cells = <0>; + reg = <0x0>; + interrupt-parent = <&adc_1>; + interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x80000001>; + dma-names = "rx"; status = "disabled"; - adc1: adc@0 { - compatible = "st,stm32mp13-adc"; - #io-channel-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0>; - interrupt-parent = <&adc_1>; - interrupts = <0>; - dmas = <&dmamux1 9 0x400 0x80000001>; - dma-names = "rx"; - status = "disabled"; - - channel@18 { - reg = <18>; - label = "vrefint"; - }; + channel@18 { + reg = <18>; + label = "vrefint"; }; }; }; + + ethernet2: ethernet@5800e000 { + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800e000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETH2MAC>, + <&rcc ETH2TX>, + <&rcc ETH2RX>, + <&rcc ETH2STP>, + <&rcc ETH2CK_K>; + st,syscon = <&syscfg 0x4 0xff000000>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_2>; + snps,tso; + access-controllers = <&etzpc 49>; + status = "disabled"; + + stmmac_axi_config_2: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; }; diff --git a/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts new file mode 100644 index 000000000000..663b6de1b814 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp133.dtsi" +#include "stm32mp13xc.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "Priva E-Measuringbox board"; + compatible = "pri,prihmb", "st,stm32mp133"; + + aliases { + ethernet0 = ðernet1; + mdio-gpio0 = &mdio0; + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + serial0 = &uart4; + serial1 = &usart6; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + counter-0 { + compatible = "interrupt-counter"; + gpios = <&gpioa 11 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-reset { + label = "reset-button"; + linux,code = <BTN_1>; + gpios = <&gpioi 7 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + led-controller-0 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + + led-red { + active-low; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm2 2 1000000 1>; + }; + + led-green { + active-low; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm1 1 1000000 1>; + }; + + led-blue { + active-low; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm1 2 1000000 1>; + }; + }; + }; + + led-controller-1 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + + led-red { + active-low; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm1 0 1000000 1>; + }; + + led-green { + active-low; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm2 0 1000000 1>; + }; + + led-blue { + active-low; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm2 1 1000000 1>; + }; + }; + }; + + /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce + * stmmac MDC clock without reducing system bus rate, we need to use + * gpio based MDIO bus. + */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpiog 2 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x10000000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@ce000000 { + reg = <0xce000000 0x02000000>; + no-map; + }; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc_1_pins_a>; + vdda-supply = <®_3v3>; + vref-supply = <®_3v3>; + status = "okay"; +}; + +&adc1 { + status = "okay"; + + channel@0 { /* Fan current PC0*/ + reg = <0>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; + channel@11 { /* Fan voltage */ + reg = <11>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; + channel@15 { /* Supply voltage */ + reg = <15>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; +}; + +&dts { + status = "okay"; +}; + +ðernet1 { + status = "okay"; + pinctrl-0 = <ðernet1_rmii_pins_a>; + pinctrl-1 = <ðernet1_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + phy-handle = <&phy0>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + clock-frequency = <100000>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + board-sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + vs-supply = <®_3v3>; + }; +}; + +&{i2c1_pins_a/pins} { + pinmux = <STM32_PINMUX('D', 3, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('B', 8, AF4)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; +}; + +&{i2c1_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('D', 3, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('B', 8, ANALOG)>; /* I2C1_SDA */ +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +/* SD card without Card-detect */ +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +/* EMMC */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + mmc-ddr-3_3v; + bus-width = <8>; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&timers1 { + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pwm1: pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&timers4 { + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pwm2: pwm { + pinctrl-0 = <&pwm4_pins_a>; + pinctrl-1 = <&pwm4_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +/* Fan PWM */ +&timers5 { + status = "okay"; + + pwm3: pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&timers2 { + status = "okay"; + + timer@1 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart7_pins_a>; + pinctrl-1 = <&uart7_sleep_pins_a>; + pinctrl-2 = <&uart7_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart6 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart6_pins_a>; + pinctrl-1 = <&usart6_sleep_pins_a>; + pinctrl-2 = <&usart6_idle_pins_a>; + linux,rs485-enabled-at-boot-time; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&pinctrl { + adc_1_pins_a: adc1-0 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1 in0 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ADC1 in15 */ + <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1 in11 */ + }; + }; + + ethernet1_rmii_pins_a: rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>; /* ETH1_RMII_REF_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet1_rmii_sleep_pins_a: rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 13, AF1)>; /* TIM1_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 13, ANALOG)>; /* TIM1_CH3 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF2)>, /* TIM4_CH1 */ + <STM32_PINMUX('B', 7, AF2)>, /* TIM4_CH2 */ + <STM32_PINMUX('D', 14, AF2)>; /* TIM4_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* TIM4_CH1 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* TIM4_CH2 */ + <STM32_PINMUX('D', 14, ANALOG)>; /* TIM4_CH3 */ + }; + }; + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */ + bias-pull-up; + }; + }; + + uart7_idle_pins_a: uart7-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */ + bias-pull-up; + }; + }; + + uart7_sleep_pins_a: uart7-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */ + <STM32_PINMUX('E', 10, ANALOG)>; /* UART7_RX */ + }; + }; + + usart6_pins_a: usart6-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF7)>, /* USART6_TX */ + <STM32_PINMUX('F', 10, AF7)>; /* USART6_DE */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('H', 11, AF7)>; /* USART6_RX */ + bias-disable; + }; + }; + + usart6_idle_pins_a: usart6-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>; /* USART6_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('F', 10, AF7)>; /* USART6_DE */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('H', 11, AF7)>; /* USART6_RX */ + bias-disable; + }; + }; + + usart6_sleep_pins_a: usart6-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* USART6_TX */ + <STM32_PINMUX('F', 10, ANALOG)>, /* USART6_DE */ + <STM32_PINMUX('H', 11, ANALOG)>; /* USART6_RX */ + }; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi index 68d32f9f5314..834a4d545fe4 100644 --- a/arch/arm/boot/dts/st/stm32mp135.dtsi +++ b/arch/arm/boot/dts/st/stm32mp135.dtsi @@ -19,5 +19,16 @@ port { }; }; + + ltdc: display-controller@5a001000 { + compatible = "st,stm32-ltdc"; + reg = <0x5a001000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LTDC_PX>; + clock-names = "lcd"; + resets = <&scmi_reset RST_SCMI_LTDC>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts new file mode 100644 index 000000000000..9902849ed040 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts @@ -0,0 +1,447 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2024 Marek Vasut <marex@denx.de> + * + * DHCOR STM32MP13 variant: + * DHCR-STM32MP135F-C100-R051-EE-F0409-SPI4-RTC-WBT-I-01LG + * DHCOR PCB number: 718-100 or newer + * DHSBC PCB number: 719-100 or newer + */ + +/dts-v1/; + +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13xx-dhcor-som.dtsi" + +/ { + model = "DH electronics STM32MP135F DHCOR DHSBC"; + compatible = "dh,stm32mp135f-dhcor-dhsbc", + "dh,stm32mp135f-dhcor-som", + "st,stm32mp135"; + + aliases { + ethernet0 = ðernet1; + ethernet1 = ðernet2; + serial2 = &usart1; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_pins_a &adc1_usb_cc_pins_b>; + vdda-supply = <&vdd_adc>; + vref-supply = <&vdd_adc>; + status = "okay"; + + adc1: adc@0 { + status = "okay"; + + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in2 & in11. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (5.1 + 47kOhms) * 5pF => 1.3us. + * Use arbitrary margin here (e.g. 5us). + * + * The pinmux pins must be set as ANALOG, use datasheet + * DS13483 Table 7. STM32MP135C/F ball definitions to + * find out which 'pin name' maps to which 'additional + * functions', which lists the mapping between pin and + * ADC channel. In this case, PA5 maps to ADC1_INP2 and + * PF13 maps to ADC1_INP11 . + */ + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; + + channel@11 { + reg = <11>; + st,min-sample-time-ns = <5000>; + }; + + /* Expansion connector: INP12:pin29 */ + channel@12 { + reg = <12>; + st,min-sample-time-ns = <5000>; + }; + }; +}; + +ðernet1 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <ðernet_mac1_address>; + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð1_rgmii_pins_a>; + pinctrl-1 = <ð1_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy1: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + realtek,clkout-disable; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_WAN; + linux,default-trigger = "netdev"; + }; + }; + }; + }; +}; + +ðernet2 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <ðernet_mac2_address>; + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð2_rgmii_pins_a>; + pinctrl-1 = <ð2_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy2: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + realtek,clkout-disable; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; + }; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "", "DHSBC_USB_PWR_CC1", "", "", + "", "", "", "DHSBC_nETH1_RST", + "", "DHCOR_HW-CODING_0", "", "DHSBC_HW-CODE_2"; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "", "", "DHCOR_BT_HOST_WAKE", + "", "", "", "", + "", "DHSBC_nTPM_CS", "", ""; +}; + +&gpioc { + gpio-line-names = "", "", "", "DHSBC_USB_5V_MEAS", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "DHCOR_RAM-CODING_0", "", "", + "", "DHCOR_RAM-CODING_1", "", "", + "", "DHSBC_HW-CODE_1", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "DHSBC_nTPM_RST", "", "", + "DHSBC_nTPM_PIRQ", "", "DHCOR_WL_HOST_WAKE", ""; +}; + +&gpiof { + gpio-line-names = "", "", "DHSBC_USB_PWR_nFLT", "", + "", "", "", "", + "", "", "", "", + "DHCOR_WL_REG_ON", "DHSBC_USB_PWR_CC2", "", ""; +}; + +&gpiog { + gpio-line-names = "", "", "", "", + "", "", "", "", + "DHSBC_nETH2_RST", "DHCOR_BT_DEV_WAKE", "", "", + "DHSBC_ETH1_INTB", "", "", "DHSBC_ETH2_INTB"; +}; + +&gpioh { + gpio-line-names = "", "", "", "DHSBC_HW-CODE_0", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioi { + gpio-line-names = "DHCOR_RTC_nINT", "DHCOR_HW-CODING_1", + "DHCOR_BT_REG_ON", "DHCOR_PMIC_nINT", + "DHSBC_BOOT0", "DHSBC_BOOT1", + "DHSBC_BOOT2", "DHSBC_USB-C_DATA_VBUS"; +}; + +&i2c1 { /* Expansion connector: SDA:pin27 SCL:pin28 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c5 { /* Expansion connector: SDA:pin3 SCL:pin5 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_b>; + pinctrl-1 = <&i2c5_sleep_pins_b>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&m_can1 { /* Expansion connector: TX:pin16 RX:pin18 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&m_can2 { /* Expansion connector: TX:pin22 RX:pin26 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + status = "okay"; +}; + +&sai1 { /* Expansion connector: SCK-A:pin12 FS-A:pin35 SD-A:pin38 SD-B:pin40 */ + clocks = <&rcc SAI1>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai1a_pins_a &sai1b_pins_a>; + pinctrl-1 = <&sai1a_sleep_pins_a &sai1b_sleep_pins_a>; +}; + +&scmi_voltd { + status = "disabled"; +}; + +&spi2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_pins_a>; + pinctrl-1 = <&spi2_sleep_pins_a>; + cs-gpios = <&gpiob 13 0>; + status = "okay"; + + st33htph: tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + interrupt-parent = <&gpioe>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioe 12 GPIO_ACTIVE_LOW>; + spi-max-frequency = <24000000>; + }; +}; + +&spi3 { /* Expansion connector: MOSI:pin19 MISO:pin21 SCK:pin22 nCS:pin24 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_pins_a>; + pinctrl-1 = <&spi3_sleep_pins_a>; + cs-gpios = <&gpiof 3 0>; + status = "disabled"; +}; + +&timers5 { /* Expansion connector: CH3:pin31 */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers13 { /* Expansion connector: CH1:pin32 */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + pwm { + pinctrl-0 = <&pwm13_pins_a>; + pinctrl-1 = <&pwm13_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@12 { + status = "okay"; + }; +}; + +&usart1 { /* Expansion connector: RX:pin33 TX:pin37 */ + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_b>; + pinctrl-1 = <&usart1_sleep_pins_b>; + pinctrl-2 = <&usart1_idle_pins_b>; + status = "okay"; +}; + +&usart2 { /* Expansion connector: RX:pin10 TX:pin8 RTS:pin11 CTS:pin36 */ + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_b>; + pinctrl-1 = <&usart2_sleep_pins_b>; + pinctrl-2 = <&usart2_idle_pins_b>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + usb33d-supply = <&usb33>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + vbus-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>; + label = "Type-C"; + self-powered; + type = "micro"; + }; +}; + +/* LDO2 is expansion connector 3V3 supply on STM32MP13xx DHCOR DHSBC rev.200 */ +&vdd_ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +/* LDO5 is carrier board 3V3 supply on STM32MP13xx DHCOR DHSBC rev.200 */ +&vdd_sd { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts index 52171214a308..19a32f7d4d7d 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts @@ -19,6 +19,7 @@ compatible = "st,stm32mp135f-dk", "st,stm32mp135"; aliases { + ethernet0 = ðernet1; serial0 = &uart4; serial1 = &usart1; serial2 = &uart8; @@ -29,6 +30,20 @@ stdout-path = "serial0:115200n8"; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_mco1: clk-mco1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x20000000>; @@ -66,6 +81,59 @@ default-state = "off"; }; }; + + panel_backlight: panel-backlight { + compatible = "gpio-backlight"; + gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>; + default-on; + status = "okay"; + }; + + panel_rgb: panel-rgb { + compatible = "rocktech,rk043fn48h"; + enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>; + backlight = <&panel_backlight>; + power-supply = <&scmi_v3v3_sw>; + status = "okay"; + + width-mm = <105>; + height-mm = <67>; + + panel-timing { + clock-frequency = <10000000>; + hactive = <480>; + hback-porch = <43>; + hfront-porch = <10>; + hsync-len = <1>; + hsync-active = <0>; + vactive = <272>; + vback-porch = <26>; + vfront-porch = <4>; + vsync-len = <10>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; + + v3v3_ao: v3v3-ao { + compatible = "regulator-fixed"; + regulator-name = "v3v3_ao"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&mcp23017 11 GPIO_ACTIVE_LOW>; + }; }; &adc_1 { @@ -101,6 +169,45 @@ status = "okay"; }; +&dcmipp { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmipp_pins_a>; + pinctrl-1 = <&dcmipp_sleep_pins_a>; + status = "okay"; + + port { + dcmipp_0: endpoint { + remote-endpoint = <&mipid02_2>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + }; + }; +}; + +ðernet1 { + status = "okay"; + pinctrl-0 = <ð1_rmii_pins_a>; + pinctrl-1 = <ð1_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + phy-handle = <&phy0_eth1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0_eth1: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c131"; + reg = <0>; + reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; +}; + &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; @@ -161,6 +268,76 @@ /* spare dmas for other usage */ /delete-property/dmas; /delete-property/dma-names; + + stmipi: csi2rx@14 { + compatible = "st,st-mipid02"; + reg = <0x14>; + clocks = <&clk_mco1>; + clock-names = "xclk"; + VDDE-supply = <&scmi_v1v8_periph>; + VDDIN-supply = <&scmi_v1v8_periph>; + reset-gpios = <&mcp23017 2 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + mipid02_0: endpoint { + data-lanes = <1 2>; + lane-polarities = <0 0 0>; + remote-endpoint = <&gc2145_ep>; + }; + }; + port@2 { + reg = <2>; + + mipid02_2: endpoint { + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + remote-endpoint = <&dcmipp_0>; + }; + }; + }; + }; + + gc2145: camera@3c { + compatible = "galaxycore,gc2145"; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + iovdd-supply = <&scmi_v3v3_sw>; + avdd-supply = <&scmi_v3v3_sw>; + dvdd-supply = <&scmi_v3v3_sw>; + powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + status = "okay"; + + port { + gc2145_ep: endpoint { + remote-endpoint = <&mipid02_0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <120000000 192000000 240000000>; + }; + }; + }; + + goodix: goodix-ts@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&goodix_pins_a>; + interrupt-parent = <&gpiof>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&scmi_v3v3_sw>; + VDDIO-supply = <&scmi_v3v3_sw>; + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + status = "okay" ; + }; }; &iwdg2 { @@ -168,8 +345,28 @@ status = "okay"; }; +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_sleep_pins_a>; + status = "okay"; + + port { + ltdc_out_rgb: endpoint { + remote-endpoint = <&panel_in_rgb>; + }; + }; +}; + &rtc { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_rsvd_pins_a>; status = "okay"; + + rtc_lsco_pins_a: rtc-lsco-0 { + pins = "out2_rmp"; + function = "lsco"; + }; }; &scmi_regu { @@ -208,6 +405,30 @@ status = "okay"; }; +/* Wifi */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_clk_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_clk_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + non-removable; + cap-sdio-irq; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3_ao>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_lsco_pins_a>; + }; +}; + &spi5 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi5_pins_a>; @@ -219,7 +440,11 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { + /* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */ pinctrl-0 = <&pwm3_pins_a>; pinctrl-1 = <&pwm3_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -234,7 +459,11 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { + /* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */ pinctrl-0 = <&pwm4_pins_a>; pinctrl-1 = <&pwm4_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -249,7 +478,11 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { + /* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */ pinctrl-0 = <&pwm8_pins_a>; pinctrl-1 = <&pwm8_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -262,7 +495,11 @@ &timers14 { status = "disabled"; + counter { + status = "okay"; + }; pwm { + /* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */ pinctrl-0 = <&pwm14_pins_a>; pinctrl-1 = <&pwm14_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -310,6 +547,14 @@ pinctrl-2 = <&usart2_idle_pins_a>; uart-has-rtscts; status = "okay"; + + bluetooth { + shutdown-gpios = <&mcp23017 13 GPIO_ACTIVE_HIGH>; + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + vbat-supply = <&v3v3_ao>; + vddio-supply = <&v3v3_ao>; + }; }; &usbh_ehci { diff --git a/arch/arm/boot/dts/st/stm32mp13xc.dtsi b/arch/arm/boot/dts/st/stm32mp13xc.dtsi index 4d00e7592882..a8bd5fe6536c 100644 --- a/arch/arm/boot/dts/st/stm32mp13xc.dtsi +++ b/arch/arm/boot/dts/st/stm32mp13xc.dtsi @@ -4,15 +4,14 @@ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. */ -/ { - soc { - cryp: crypto@54002000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54002000 0x400>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; +&etzpc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + access-controllers = <&etzpc 42>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp13xf.dtsi b/arch/arm/boot/dts/st/stm32mp13xf.dtsi index 4d00e7592882..a8bd5fe6536c 100644 --- a/arch/arm/boot/dts/st/stm32mp13xf.dtsi +++ b/arch/arm/boot/dts/st/stm32mp13xf.dtsi @@ -4,15 +4,14 @@ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. */ -/ { - soc { - cryp: crypto@54002000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54002000 0x400>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; +&etzpc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + access-controllers = <&etzpc 42>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi new file mode 100644 index 000000000000..6236ce2a6968 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2024 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/mfd/st,stpmic1.h> +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "DH electronics STM32MP13xx DHCOR SoM"; + compatible = "dh,stm32mp131a-dhcor-som", + "st,stm32mp131"; + + aliases { + mmc0 = &sdmmc2; + mmc1 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + rtc0 = &rv3032; + spi0 = &qspi; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@dd000000 { + reg = <0xdd000000 0x3000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>; + }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&vin>; + ldo2-supply = <&vin>; + ldo3-supply = <&vin>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; + ldo6-supply = <&vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcpu: buck1 { /* VDD_CPU_1V2 */ + regulator-name = "vddcpu"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { /* VDD_DDR_1V35 */ + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { /* VDD_3V3_1V8 */ + regulator-name = "vdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vddcore: buck4 { /* VDD_CORE_1V2 */ + regulator-name = "vddcore"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_adc: ldo1 { /* VDD_ADC_1V8 */ + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */ + regulator-name = "vdd_ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vdd_ldo3: ldo3 { /* LDO3_OUT */ + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO3 0>; + }; + + vdd_usb: ldo4 { /* VDD_USB_3V3 */ + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */ + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO5 0>; + }; + + vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */ + regulator-name = "vdd_sd2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { /* VREF_DDR_0V675 */ + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { /* BST_OUT_5V2 */ + regulator-name = "bst_out"; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + eeprom0: eeprom@50 { + compatible = "atmel,24c256"; /* ST M24256 */ + reg = <0x50>; + pagesize = <64>; + }; + + rv3032: rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>; + }; + + eeprom0wl: eeprom@58 { + compatible = "st,24256e-wl"; /* ST M24256E WL page of 0x50 */ + pagesize = <64>; + reg = <0x58>; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +/* Console UART */ +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_b>; + pinctrl-1 = <&uart4_sleep_pins_b>; + pinctrl-2 = <&uart4_idle_pins_b>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +/* Bluetooth */ +&uart7 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart7_pins_a>; + pinctrl-1 = <&uart7_sleep_pins_a>; + pinctrl-2 = <&uart7_idle_pins_a>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt"; + max-speed = <3000000>; + device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>; + }; +}; + +/* SDIO WiFi */ +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + non-removable; + st,neg-edge; + vmmc-supply = <&vdd>; + mmc-pwrseq = <&sdio_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { /* muRata 1YN */ + reg = <1>; + compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac"; + interrupt-parent = <&gpioe>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +/* eMMC */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + bus-width = <8>; + mmc-ddr-3_3v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&vdd>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi index ae83e7b10232..40605ea85ee1 100644 --- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi @@ -26,6 +26,13 @@ }; /omit-if-no-ref/ + adc1_in10_pins_a: adc1-in10-0 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>; + }; + }; + + /omit-if-no-ref/ adc12_ain_pins_a: adc12-ain-0 { pins { pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ @@ -585,6 +592,43 @@ }; /omit-if-no-ref/ + ethernet0_rmii_pins_d: rmii-3 { + pins1 { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + ethernet0_rmii_sleep_pins_d: rmii-sleep-3 { + pins1 { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + + /omit-if-no-ref/ fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -726,6 +770,25 @@ }; /omit-if-no-ref/ + i2c1_pins_c: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + i2c1_sleep_pins_c: i2c1-sleep-2 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ + }; + }; + + /omit-if-no-ref/ i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -820,6 +883,27 @@ }; /omit-if-no-ref/ + i2s1_pins_a: i2s1-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, AF5)>, /* I2S2_SDI */ + <STM32_PINMUX('A', 4, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 5, AF5)>; /* I2S2_CK */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + /omit-if-no-ref/ + i2s1_sleep_pins_a: i2s1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, ANALOG)>, /* I2S2_SDI */ + <STM32_PINMUX('A', 4, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 5, ANALOG)>; /* I2S2_CK */ + }; + }; + + /omit-if-no-ref/ i2s2_pins_a: i2s2-0 { pins { pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ @@ -1419,6 +1503,23 @@ }; /omit-if-no-ref/ + pwm1_pins_d: pwm1-3 { + pins { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm1_sleep_pins_d: pwm1-sleep-3 { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; + }; + }; + + /omit-if-no-ref/ pwm2_pins_a: pwm2-0 { pins { pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ @@ -1697,6 +1798,13 @@ }; /omit-if-no-ref/ + rtc_rsvd_pins_a: rtc-rsvd-0 { + pins { + pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */ + }; + }; + + /omit-if-no-ref/ sai2a_pins_a: sai2a-0 { pins { pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ @@ -2154,6 +2262,66 @@ }; /omit-if-no-ref/ + sdmmc2_b4_pins_c: sdmmc2-b4-2 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + sdmmc2_b4_od_pins_c: sdmmc2-b4-od-2 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + sdmmc2_b4_sleep_pins_c: sdmmc2-b4-sleep-2 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + /omit-if-no-ref/ sdmmc2_d47_pins_a: sdmmc2-d47-0 { pins { pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ @@ -2229,6 +2397,9 @@ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; }; }; @@ -2380,6 +2551,66 @@ }; /omit-if-no-ref/ + sdmmc3_b4_pins_c: sdmmc3-b4-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + sdmmc3_b4_od_pins_c: sdmmc3-b4-od-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + + pins3 { + pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + sdmmc3_b4_sleep_pins_c: sdmmc3-b4-sleep-2 { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + + /omit-if-no-ref/ spdifrx_pins_a: spdifrx-0 { pins { pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ @@ -2591,6 +2822,41 @@ }; /omit-if-no-ref/ + uart4_pins_e: uart4-4 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart4_idle_pins_e: uart4-idle-4 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */ + }; + + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart4_sleep_pins_e: uart4-sleep-4 { + pins { + pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + /omit-if-no-ref/ uart5_pins_a: uart5-0 { pins1 { pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */ @@ -2668,6 +2934,23 @@ }; /omit-if-no-ref/ + uart7_pins_d: uart7-3 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF7)>, /* UART7_TX */ + <STM32_PINMUX('F', 8, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */ + <STM32_PINMUX('F', 9, AF7)>; /* UART7_CTS */ + bias-disable; + }; + }; + + /omit-if-no-ref/ uart8_pins_a: uart8-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ @@ -3109,6 +3392,25 @@ }; /omit-if-no-ref/ + i2c6_pins_b: i2c6-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF2)>, /* I2C6_SCL */ + <STM32_PINMUX('A', 12, AF2)>; /* I2C6_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + i2c6_sleep_pins_b: i2c6-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C6_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C6_SDA */ + }; + }; + + /omit-if-no-ref/ spi1_pins_a: spi1-0 { pins1 { pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi index fa4cbd312e5a..0daa8ffe2ff5 100644 --- a/arch/arm/boot/dts/st/stm32mp151.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi @@ -50,6 +50,7 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&intc>; + arm,no-tick-in-suspend; }; clocks { @@ -122,1049 +123,13 @@ interrupt-parent = <&intc>; ranges; - timers2: timer@40000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40000000 0x400>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM2_K>; - clock-names = "int"; - dmas = <&dmamux1 18 0x400 0x1>, - <&dmamux1 19 0x400 0x1>, - <&dmamux1 20 0x400 0x1>, - <&dmamux1 21 0x400 0x1>, - <&dmamux1 22 0x400 0x1>; - dma-names = "ch1", "ch2", "ch3", "ch4", "up"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@1 { - compatible = "st,stm32h7-timer-trigger"; - reg = <1>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-timer-counter"; - status = "disabled"; - }; - }; - - timers3: timer@40001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40001000 0x400>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM3_K>; - clock-names = "int"; - dmas = <&dmamux1 23 0x400 0x1>, - <&dmamux1 24 0x400 0x1>, - <&dmamux1 25 0x400 0x1>, - <&dmamux1 26 0x400 0x1>, - <&dmamux1 27 0x400 0x1>, - <&dmamux1 28 0x400 0x1>; - dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@2 { - compatible = "st,stm32h7-timer-trigger"; - reg = <2>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-timer-counter"; - status = "disabled"; - }; - }; - - timers4: timer@40002000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40002000 0x400>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM4_K>; - clock-names = "int"; - dmas = <&dmamux1 29 0x400 0x1>, - <&dmamux1 30 0x400 0x1>, - <&dmamux1 31 0x400 0x1>, - <&dmamux1 32 0x400 0x1>; - dma-names = "ch1", "ch2", "ch3", "ch4"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@3 { - compatible = "st,stm32h7-timer-trigger"; - reg = <3>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-timer-counter"; - status = "disabled"; - }; - }; - - timers5: timer@40003000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40003000 0x400>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM5_K>; - clock-names = "int"; - dmas = <&dmamux1 55 0x400 0x1>, - <&dmamux1 56 0x400 0x1>, - <&dmamux1 57 0x400 0x1>, - <&dmamux1 58 0x400 0x1>, - <&dmamux1 59 0x400 0x1>, - <&dmamux1 60 0x400 0x1>; - dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@4 { - compatible = "st,stm32h7-timer-trigger"; - reg = <4>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-timer-counter"; - status = "disabled"; - }; - }; - - timers6: timer@40004000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40004000 0x400>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM6_K>; - clock-names = "int"; - dmas = <&dmamux1 69 0x400 0x1>; - dma-names = "up"; - status = "disabled"; - - timer@5 { - compatible = "st,stm32h7-timer-trigger"; - reg = <5>; - status = "disabled"; - }; - }; - - timers7: timer@40005000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40005000 0x400>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM7_K>; - clock-names = "int"; - dmas = <&dmamux1 70 0x400 0x1>; - dma-names = "up"; - status = "disabled"; - - timer@6 { - compatible = "st,stm32h7-timer-trigger"; - reg = <6>; - status = "disabled"; - }; - }; - - timers12: timer@40006000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40006000 0x400>; - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM12_K>; - clock-names = "int"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@11 { - compatible = "st,stm32h7-timer-trigger"; - reg = <11>; - status = "disabled"; - }; - }; - - timers13: timer@40007000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40007000 0x400>; - interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM13_K>; - clock-names = "int"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@12 { - compatible = "st,stm32h7-timer-trigger"; - reg = <12>; - status = "disabled"; - }; - }; - - timers14: timer@40008000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40008000 0x400>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM14_K>; - clock-names = "int"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@13 { - compatible = "st,stm32h7-timer-trigger"; - reg = <13>; - status = "disabled"; - }; - }; - - lptimer1: timer@40009000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-lptimer"; - reg = <0x40009000 0x400>; - interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc LPTIM1_K>; - clock-names = "mux"; - wakeup-source; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm-lp"; - #pwm-cells = <3>; - status = "disabled"; - }; - - trigger@0 { - compatible = "st,stm32-lptimer-trigger"; - reg = <0>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-lptimer-counter"; - status = "disabled"; - }; - }; - - spi2: spi@4000b000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32h7-spi"; - reg = <0x4000b000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI2_K>; - resets = <&rcc SPI2_R>; - dmas = <&dmamux1 39 0x400 0x05>, - <&dmamux1 40 0x400 0x05>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2s2: audio-controller@4000b000 { - compatible = "st,stm32h7-i2s"; - #sound-dai-cells = <0>; - reg = <0x4000b000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 39 0x400 0x01>, - <&dmamux1 40 0x400 0x01>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - spi3: spi@4000c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32h7-spi"; - reg = <0x4000c000 0x400>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI3_K>; - resets = <&rcc SPI3_R>; - dmas = <&dmamux1 61 0x400 0x05>, - <&dmamux1 62 0x400 0x05>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2s3: audio-controller@4000c000 { - compatible = "st,stm32h7-i2s"; - #sound-dai-cells = <0>; - reg = <0x4000c000 0x400>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 61 0x400 0x01>, - <&dmamux1 62 0x400 0x01>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - spdifrx: audio-controller@4000d000 { - compatible = "st,stm32h7-spdifrx"; - #sound-dai-cells = <0>; - reg = <0x4000d000 0x400>; - clocks = <&rcc SPDIF_K>; - clock-names = "kclk"; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 93 0x400 0x01>, - <&dmamux1 94 0x400 0x01>; - dma-names = "rx", "rx-ctrl"; - status = "disabled"; - }; - - usart2: serial@4000e000 { - compatible = "st,stm32h7-uart"; - reg = <0x4000e000 0x400>; - interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc USART2_K>; - wakeup-source; - dmas = <&dmamux1 43 0x400 0x15>, - <&dmamux1 44 0x400 0x11>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - usart3: serial@4000f000 { - compatible = "st,stm32h7-uart"; - reg = <0x4000f000 0x400>; - interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc USART3_K>; - wakeup-source; - dmas = <&dmamux1 45 0x400 0x15>, - <&dmamux1 46 0x400 0x11>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart4: serial@40010000 { - compatible = "st,stm32h7-uart"; - reg = <0x40010000 0x400>; - interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc UART4_K>; - wakeup-source; - dmas = <&dmamux1 63 0x400 0x15>, - <&dmamux1 64 0x400 0x11>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart5: serial@40011000 { - compatible = "st,stm32h7-uart"; - reg = <0x40011000 0x400>; - interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc UART5_K>; - wakeup-source; - dmas = <&dmamux1 65 0x400 0x15>, - <&dmamux1 66 0x400 0x11>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c1: i2c@40012000 { - compatible = "st,stm32mp15-i2c"; - reg = <0x40012000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C1_K>; - resets = <&rcc I2C1_R>; - #address-cells = <1>; - #size-cells = <0>; - st,syscfg-fmp = <&syscfg 0x4 0x1>; - wakeup-source; - i2c-analog-filter; - status = "disabled"; - }; - - i2c2: i2c@40013000 { - compatible = "st,stm32mp15-i2c"; - reg = <0x40013000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C2_K>; - resets = <&rcc I2C2_R>; - #address-cells = <1>; - #size-cells = <0>; - st,syscfg-fmp = <&syscfg 0x4 0x2>; - wakeup-source; - i2c-analog-filter; - status = "disabled"; - }; - - i2c3: i2c@40014000 { - compatible = "st,stm32mp15-i2c"; - reg = <0x40014000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C3_K>; - resets = <&rcc I2C3_R>; - #address-cells = <1>; - #size-cells = <0>; - st,syscfg-fmp = <&syscfg 0x4 0x4>; - wakeup-source; - i2c-analog-filter; - status = "disabled"; - }; - - i2c5: i2c@40015000 { - compatible = "st,stm32mp15-i2c"; - reg = <0x40015000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C5_K>; - resets = <&rcc I2C5_R>; - #address-cells = <1>; - #size-cells = <0>; - st,syscfg-fmp = <&syscfg 0x4 0x10>; - wakeup-source; - i2c-analog-filter; - status = "disabled"; - }; - - cec: cec@40016000 { - compatible = "st,stm32-cec"; - reg = <0x40016000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CEC_K>, <&rcc CEC>; - clock-names = "cec", "hdmi-cec"; - status = "disabled"; - }; - - dac: dac@40017000 { - compatible = "st,stm32h7-dac-core"; - reg = <0x40017000 0x400>; - clocks = <&rcc DAC12>; - clock-names = "pclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - dac1: dac@1 { - compatible = "st,stm32-dac"; - #io-channel-cells = <1>; - reg = <1>; - status = "disabled"; - }; - - dac2: dac@2 { - compatible = "st,stm32-dac"; - #io-channel-cells = <1>; - reg = <2>; - status = "disabled"; - }; - }; - - uart7: serial@40018000 { - compatible = "st,stm32h7-uart"; - reg = <0x40018000 0x400>; - interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc UART7_K>; - wakeup-source; - dmas = <&dmamux1 79 0x400 0x15>, - <&dmamux1 80 0x400 0x11>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart8: serial@40019000 { - compatible = "st,stm32h7-uart"; - reg = <0x40019000 0x400>; - interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc UART8_K>; - wakeup-source; - dmas = <&dmamux1 81 0x400 0x15>, - <&dmamux1 82 0x400 0x11>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - timers1: timer@44000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x44000000 0x400>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "brk", "up", "trg-com", "cc"; - clocks = <&rcc TIM1_K>; - clock-names = "int"; - dmas = <&dmamux1 11 0x400 0x1>, - <&dmamux1 12 0x400 0x1>, - <&dmamux1 13 0x400 0x1>, - <&dmamux1 14 0x400 0x1>, - <&dmamux1 15 0x400 0x1>, - <&dmamux1 16 0x400 0x1>, - <&dmamux1 17 0x400 0x1>; - dma-names = "ch1", "ch2", "ch3", "ch4", - "up", "trig", "com"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@0 { - compatible = "st,stm32h7-timer-trigger"; - reg = <0>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-timer-counter"; - status = "disabled"; - }; - }; - - timers8: timer@44001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x44001000 0x400>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "brk", "up", "trg-com", "cc"; - clocks = <&rcc TIM8_K>; - clock-names = "int"; - dmas = <&dmamux1 47 0x400 0x1>, - <&dmamux1 48 0x400 0x1>, - <&dmamux1 49 0x400 0x1>, - <&dmamux1 50 0x400 0x1>, - <&dmamux1 51 0x400 0x1>, - <&dmamux1 52 0x400 0x1>, - <&dmamux1 53 0x400 0x1>; - dma-names = "ch1", "ch2", "ch3", "ch4", - "up", "trig", "com"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@7 { - compatible = "st,stm32h7-timer-trigger"; - reg = <7>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-timer-counter"; - status = "disabled"; - }; - }; - - usart6: serial@44003000 { - compatible = "st,stm32h7-uart"; - reg = <0x44003000 0x400>; - interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc USART6_K>; - wakeup-source; - dmas = <&dmamux1 71 0x400 0x15>, - <&dmamux1 72 0x400 0x11>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - spi1: spi@44004000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32h7-spi"; - reg = <0x44004000 0x400>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI1_K>; - resets = <&rcc SPI1_R>; - dmas = <&dmamux1 37 0x400 0x05>, - <&dmamux1 38 0x400 0x05>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2s1: audio-controller@44004000 { - compatible = "st,stm32h7-i2s"; - #sound-dai-cells = <0>; - reg = <0x44004000 0x400>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 37 0x400 0x01>, - <&dmamux1 38 0x400 0x01>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - spi4: spi@44005000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32h7-spi"; - reg = <0x44005000 0x400>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI4_K>; - resets = <&rcc SPI4_R>; - dmas = <&dmamux1 83 0x400 0x05>, - <&dmamux1 84 0x400 0x05>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - timers15: timer@44006000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x44006000 0x400>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM15_K>; - clock-names = "int"; - dmas = <&dmamux1 105 0x400 0x1>, - <&dmamux1 106 0x400 0x1>, - <&dmamux1 107 0x400 0x1>, - <&dmamux1 108 0x400 0x1>; - dma-names = "ch1", "up", "trig", "com"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@14 { - compatible = "st,stm32h7-timer-trigger"; - reg = <14>; - status = "disabled"; - }; - }; - - timers16: timer@44007000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x44007000 0x400>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM16_K>; - clock-names = "int"; - dmas = <&dmamux1 109 0x400 0x1>, - <&dmamux1 110 0x400 0x1>; - dma-names = "ch1", "up"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - timer@15 { - compatible = "st,stm32h7-timer-trigger"; - reg = <15>; - status = "disabled"; - }; - }; - - timers17: timer@44008000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x44008000 0x400>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global"; - clocks = <&rcc TIM17_K>; - clock-names = "int"; - dmas = <&dmamux1 111 0x400 0x1>, - <&dmamux1 112 0x400 0x1>; - dma-names = "ch1", "up"; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm"; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@16 { - compatible = "st,stm32h7-timer-trigger"; - reg = <16>; - status = "disabled"; - }; - }; - - spi5: spi@44009000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32h7-spi"; - reg = <0x44009000 0x400>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI5_K>; - resets = <&rcc SPI5_R>; - dmas = <&dmamux1 85 0x400 0x05>, - <&dmamux1 86 0x400 0x05>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - sai1: sai@4400a000 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4400a000 0x400>; - reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - resets = <&rcc SAI1_R>; - status = "disabled"; - - sai1a: audio-controller@4400a004 { - #sound-dai-cells = <0>; - - compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x20>; - clocks = <&rcc SAI1_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 87 0x400 0x01>; - status = "disabled"; - }; - - sai1b: audio-controller@4400a024 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x20>; - clocks = <&rcc SAI1_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 88 0x400 0x01>; - status = "disabled"; - }; - }; - - sai2: sai@4400b000 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4400b000 0x400>; - reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - resets = <&rcc SAI2_R>; - status = "disabled"; - - sai2a: audio-controller@4400b004 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x20>; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 89 0x400 0x01>; - status = "disabled"; - }; - - sai2b: audio-controller@4400b024 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x20>; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 90 0x400 0x01>; - status = "disabled"; - }; - }; - - sai3: sai@4400c000 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4400c000 0x400>; - reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - resets = <&rcc SAI3_R>; - status = "disabled"; - - sai3a: audio-controller@4400c004 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x20>; - clocks = <&rcc SAI3_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 113 0x400 0x01>; - status = "disabled"; - }; - - sai3b: audio-controller@4400c024 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x20>; - clocks = <&rcc SAI3_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 114 0x400 0x01>; - status = "disabled"; - }; - }; - - dfsdm: dfsdm@4400d000 { - compatible = "st,stm32mp1-dfsdm"; - reg = <0x4400d000 0x800>; - clocks = <&rcc DFSDM_K>; - clock-names = "dfsdm"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - dfsdm0: filter@0 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <0>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 101 0x400 0x01>; - dma-names = "rx"; - status = "disabled"; - }; - - dfsdm1: filter@1 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <1>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 102 0x400 0x01>; - dma-names = "rx"; - status = "disabled"; - }; - - dfsdm2: filter@2 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <2>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 103 0x400 0x01>; - dma-names = "rx"; - status = "disabled"; - }; - - dfsdm3: filter@3 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <3>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 104 0x400 0x01>; - dma-names = "rx"; - status = "disabled"; - }; - - dfsdm4: filter@4 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <4>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 91 0x400 0x01>; - dma-names = "rx"; - status = "disabled"; - }; - - dfsdm5: filter@5 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <5>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 92 0x400 0x01>; - dma-names = "rx"; - status = "disabled"; - }; - }; - - dma1: dma-controller@48000000 { - compatible = "st,stm32-dma"; - reg = <0x48000000 0x400>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc DMA1>; - resets = <&rcc DMA1_R>; - #dma-cells = <4>; - st,mem2mem; - dma-requests = <8>; - }; - - dma2: dma-controller@48001000 { - compatible = "st,stm32-dma"; - reg = <0x48001000 0x400>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc DMA2>; - resets = <&rcc DMA2_R>; - #dma-cells = <4>; - st,mem2mem; - dma-requests = <8>; - }; - - dmamux1: dma-router@48002000 { - compatible = "st,stm32h7-dmamux"; - reg = <0x48002000 0x40>; - #dma-cells = <3>; - dma-requests = <128>; - dma-masters = <&dma1 &dma2>; - dma-channels = <16>; - clocks = <&rcc DMAMUX>; - resets = <&rcc DMAMUX_R>; - }; - - adc: adc@48003000 { - compatible = "st,stm32mp1-adc-core"; - reg = <0x48003000 0x400>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc ADC12>, <&rcc ADC12_K>; - clock-names = "bus", "adc"; - interrupt-controller; - st,syscfg = <&syscfg>; - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - adc1: adc@0 { - compatible = "st,stm32mp1-adc"; - #io-channel-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0>; - interrupt-parent = <&adc>; - interrupts = <0>; - dmas = <&dmamux1 9 0x400 0x01>; - dma-names = "rx"; - status = "disabled"; - }; - - adc2: adc@100 { - compatible = "st,stm32mp1-adc"; - #io-channel-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x100>; - interrupt-parent = <&adc>; - interrupts = <1>; - dmas = <&dmamux1 10 0x400 0x01>; - dma-names = "rx"; - nvmem-cells = <&vrefint>; - nvmem-cell-names = "vrefint"; - status = "disabled"; - channel@13 { - reg = <13>; - label = "vrefint"; - }; - channel@14 { - reg = <14>; - label = "vddcore"; - }; - }; - }; - - sdmmc3: mmc@48004000 { - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00253180>; - reg = <0x48004000 0x400>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SDMMC3_K>; - clock-names = "apb_pclk"; - resets = <&rcc SDMMC3_R>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <120000000>; - status = "disabled"; - }; - - usbotg_hs: usb-otg@49000000 { - compatible = "st,stm32mp15-hsotg", "snps,dwc2"; - reg = <0x49000000 0x10000>; - clocks = <&rcc USBO_K>, <&usbphyc>; - clock-names = "otg", "utmi"; - resets = <&rcc USBO_R>; - reset-names = "dwc2"; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - g-rx-fifo-size = <512>; - g-np-tx-fifo-size = <32>; - g-tx-fifo-size = <256 16 16 16 16 16 16 16>; - dr_mode = "otg"; - otg-rev = <0x200>; - usb33d-supply = <&usb33>; - status = "disabled"; - }; - ipcc: mailbox@4c001000 { compatible = "st,stm32mp1-ipcc"; #mbox-cells = <1>; reg = <0x4c001000 0x400>; st,proc-id = <0>; interrupts-extended = - <&exti 61 1>, + <&exti 61 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "rx", "tx"; clocks = <&rcc IPCC>; @@ -1172,18 +137,6 @@ status = "disabled"; }; - dcmi: dcmi@4c006000 { - compatible = "st,stm32-dcmi"; - reg = <0x4c006000 0x400>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - resets = <&rcc CAMITF_R>; - clocks = <&rcc DCMI>; - clock-names = "mclk"; - dmas = <&dmamux1 75 0x400 0x01>; - dma-names = "tx"; - status = "disabled"; - }; - rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -1224,6 +177,81 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x5000d000 0x400>; + interrupts-extended = + <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */ + <&intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */ + <&intc GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0>, /* EXTI_20 */ + <&intc GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */ + <&intc GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, /* EXTI_40 */ + <0>, + <0>, + <0>, + <0>, + <0>, + <&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <&intc GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */ + <0>, + <&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, /* EXTI_60 */ + <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <0>, + <&intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>, + <&intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_70 */ + <0>, + <0>, + <&intc GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; }; syscfg: syscon@50020000 { @@ -1232,131 +260,6 @@ clocks = <&rcc SYSCFG>; }; - lptimer2: timer@50021000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-lptimer"; - reg = <0x50021000 0x400>; - interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc LPTIM2_K>; - clock-names = "mux"; - wakeup-source; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm-lp"; - #pwm-cells = <3>; - status = "disabled"; - }; - - trigger@1 { - compatible = "st,stm32-lptimer-trigger"; - reg = <1>; - status = "disabled"; - }; - - counter { - compatible = "st,stm32-lptimer-counter"; - status = "disabled"; - }; - }; - - lptimer3: timer@50022000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-lptimer"; - reg = <0x50022000 0x400>; - interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc LPTIM3_K>; - clock-names = "mux"; - wakeup-source; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm-lp"; - #pwm-cells = <3>; - status = "disabled"; - }; - - trigger@2 { - compatible = "st,stm32-lptimer-trigger"; - reg = <2>; - status = "disabled"; - }; - }; - - lptimer4: timer@50023000 { - compatible = "st,stm32-lptimer"; - reg = <0x50023000 0x400>; - interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc LPTIM4_K>; - clock-names = "mux"; - wakeup-source; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm-lp"; - #pwm-cells = <3>; - status = "disabled"; - }; - }; - - lptimer5: timer@50024000 { - compatible = "st,stm32-lptimer"; - reg = <0x50024000 0x400>; - interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc LPTIM5_K>; - clock-names = "mux"; - wakeup-source; - status = "disabled"; - - pwm { - compatible = "st,stm32-pwm-lp"; - #pwm-cells = <3>; - status = "disabled"; - }; - }; - - vrefbuf: vrefbuf@50025000 { - compatible = "st,stm32-vrefbuf"; - reg = <0x50025000 0x8>; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <2500000>; - clocks = <&rcc VREF>; - status = "disabled"; - }; - - sai4: sai@50027000 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x50027000 0x400>; - reg = <0x50027000 0x4>, <0x500273f0 0x10>; - interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - resets = <&rcc SAI4_R>; - status = "disabled"; - - sai4a: audio-controller@50027004 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x20>; - clocks = <&rcc SAI4_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 99 0x400 0x01>; - status = "disabled"; - }; - - sai4b: audio-controller@50027024 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x20>; - clocks = <&rcc SAI4_K>; - clock-names = "sai_ck"; - dmas = <&dmamux1 100 0x400 0x01>; - status = "disabled"; - }; - }; - dts: thermal@50028000 { compatible = "st,stm32-thermal"; reg = <0x50028000 0x100>; @@ -1367,26 +270,6 @@ status = "disabled"; }; - hash1: hash@54002000 { - compatible = "st,stm32f756-hash"; - reg = <0x54002000 0x400>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc HASH1>; - resets = <&rcc HASH1_R>; - dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>; - dma-names = "in"; - dma-maxburst = <2>; - status = "disabled"; - }; - - rng1: rng@54003000 { - compatible = "st,stm32-rng"; - reg = <0x54003000 0x400>; - clocks = <&rcc RNG1_K>; - resets = <&rcc RNG1_R>; - status = "disabled"; - }; - mdma1: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; @@ -1398,55 +281,6 @@ dma-requests = <48>; }; - fmc: memory-controller@58002000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "st,stm32mp1-fmc2-ebi"; - reg = <0x58002000 0x1000>; - clocks = <&rcc FMC_K>; - resets = <&rcc FMC_R>; - status = "disabled"; - - ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ - <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ - <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ - <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ - <4 0 0x80000000 0x10000000>; /* NAND */ - - nand-controller@4,0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32mp1-fmc2-nfc"; - reg = <4 0x00000000 0x1000>, - <4 0x08010000 0x1000>, - <4 0x08020000 0x1000>, - <4 0x01000000 0x1000>, - <4 0x09010000 0x1000>, - <4 0x09020000 0x1000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>, - <&mdma1 20 0x2 0x12000a08 0x0 0x0>, - <&mdma1 21 0x2 0x12000a0a 0x0 0x0>; - dma-names = "tx", "rx", "ecc"; - status = "disabled"; - }; - }; - - qspi: spi@58003000 { - compatible = "st,stm32f469-qspi"; - reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; - reg-names = "qspi", "qspi_mm"; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>, - <&mdma1 22 0x2 0x10100008 0x0 0x0>; - dma-names = "tx", "rx"; - clocks = <&rcc QSPI_K>; - resets = <&rcc QSPI_R>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - sdmmc1: mmc@58005000 { compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; @@ -1482,39 +316,6 @@ status = "disabled"; }; - ethernet0: ethernet@5800a000 { - compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; - reg = <0x5800a000 0x2000>; - reg-names = "stmmaceth"; - interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clock-names = "stmmaceth", - "mac-clk-tx", - "mac-clk-rx", - "eth-ck", - "ptp_ref", - "ethstp"; - clocks = <&rcc ETHMAC>, - <&rcc ETHTX>, - <&rcc ETHRX>, - <&rcc ETHCK_K>, - <&rcc ETHPTP_K>, - <&rcc ETHSTP>; - st,syscon = <&syscfg 0x4>; - snps,mixed-burst; - snps,pbl = <2>; - snps,en-tx-lpi-clockgating; - snps,axi-config = <&stmmac_axi_config_0>; - snps,tso; - status = "disabled"; - - stmmac_axi_config_0: stmmac-axi-config { - snps,wr_osr_lmt = <0x7>; - snps,rd_osr_lmt = <0x7>; - snps,blen = <0 0 0 0 16 8 4>; - }; - }; - usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; @@ -1554,6 +355,8 @@ reg = <0x5a002000 0x400>; clocks = <&rcc IWDG2>, <&rcc CK_LSI>; clock-names = "pclk", "lsi"; + interrupts-extended = <&exti 46 IRQ_TYPE_LEVEL_HIGH>; + wakeup-source; status = "disabled"; }; @@ -1580,45 +383,6 @@ }; }; - usart1: serial@5c000000 { - compatible = "st,stm32h7-uart"; - reg = <0x5c000000 0x400>; - interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc USART1_K>; - wakeup-source; - status = "disabled"; - }; - - spi6: spi@5c001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32h7-spi"; - reg = <0x5c001000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc SPI6_K>; - resets = <&rcc SPI6_R>; - dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>, - <&mdma1 35 0x0 0x40002 0x0 0x0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c4: i2c@5c002000 { - compatible = "st,stm32mp15-i2c"; - reg = <0x5c002000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C4_K>; - resets = <&rcc I2C4_R>; - #address-cells = <1>; - #size-cells = <0>; - st,syscfg-fmp = <&syscfg 0x4 0x8>; - wakeup-source; - i2c-analog-filter; - status = "disabled"; - }; - rtc: rtc@5c004000 { compatible = "st,stm32mp1-rtc"; reg = <0x5c004000 0x400>; @@ -1647,20 +411,1446 @@ }; }; - i2c6: i2c@5c009000 { - compatible = "st,stm32mp15-i2c"; - reg = <0x5c009000 0x400>; - interrupt-names = "event", "error"; - interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C6_K>; - resets = <&rcc I2C6_R>; + etzpc: bus@5c007000 { + compatible = "st,stm32-etzpc", "simple-bus"; + reg = <0x5c007000 0x400>; #address-cells = <1>; - #size-cells = <0>; - st,syscfg-fmp = <&syscfg 0x4 0x20>; - wakeup-source; - i2c-analog-filter; - status = "disabled"; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + timers2: timer@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM2_K>; + clock-names = "int"; + dmas = <&dmamux1 18 0x400 0x1>, + <&dmamux1 19 0x400 0x1>, + <&dmamux1 20 0x400 0x1>, + <&dmamux1 21 0x400 0x1>, + <&dmamux1 22 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up"; + access-controllers = <&etzpc 16>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32h7-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers3: timer@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM3_K>; + clock-names = "int"; + dmas = <&dmamux1 23 0x400 0x1>, + <&dmamux1 24 0x400 0x1>, + <&dmamux1 25 0x400 0x1>, + <&dmamux1 26 0x400 0x1>, + <&dmamux1 27 0x400 0x1>, + <&dmamux1 28 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; + access-controllers = <&etzpc 17>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32h7-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers4: timer@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM4_K>; + clock-names = "int"; + dmas = <&dmamux1 29 0x400 0x1>, + <&dmamux1 30 0x400 0x1>, + <&dmamux1 31 0x400 0x1>, + <&dmamux1 32 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4"; + access-controllers = <&etzpc 18>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32h7-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers5: timer@40003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40003000 0x400>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM5_K>; + clock-names = "int"; + dmas = <&dmamux1 55 0x400 0x1>, + <&dmamux1 56 0x400 0x1>, + <&dmamux1 57 0x400 0x1>, + <&dmamux1 58 0x400 0x1>, + <&dmamux1 59 0x400 0x1>, + <&dmamux1 60 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; + access-controllers = <&etzpc 19>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32h7-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers6: timer@40004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40004000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM6_K>; + clock-names = "int"; + dmas = <&dmamux1 69 0x400 0x1>; + dma-names = "up"; + access-controllers = <&etzpc 20>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + timer@5 { + compatible = "st,stm32h7-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + + timers7: timer@40005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40005000 0x400>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM7_K>; + clock-names = "int"; + dmas = <&dmamux1 70 0x400 0x1>; + dma-names = "up"; + access-controllers = <&etzpc 21>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + timer@6 { + compatible = "st,stm32h7-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timer@40006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40006000 0x400>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM12_K>; + clock-names = "int"; + access-controllers = <&etzpc 22>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32h7-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timer@40007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40007000 0x400>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM13_K>; + clock-names = "int"; + access-controllers = <&etzpc 23>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@12 { + compatible = "st,stm32h7-timer-trigger"; + reg = <12>; + status = "disabled"; + }; + }; + + timers14: timer@40008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40008000 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM14_K>; + clock-names = "int"; + access-controllers = <&etzpc 24>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@13 { + compatible = "st,stm32h7-timer-trigger"; + reg = <13>; + status = "disabled"; + }; + }; + + lptimer1: timer@40009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x40009000 0x400>; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM1_K>; + clock-names = "mux"; + wakeup-source; + access-controllers = <&etzpc 25>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + + i2s2: audio-controller@4000b000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 27>; + status = "disabled"; + }; + + spi2: spi@4000b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + dmas = <&dmamux1 39 0x400 0x05>, + <&dmamux1 40 0x400 0x05>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 27>; + status = "disabled"; + }; + + i2s3: audio-controller@4000c000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 28>; + status = "disabled"; + }; + + spi3: spi@4000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + dmas = <&dmamux1 61 0x400 0x05>, + <&dmamux1 62 0x400 0x05>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 28>; + status = "disabled"; + }; + + spdifrx: audio-controller@4000d000 { + compatible = "st,stm32h7-spdifrx"; + #sound-dai-cells = <0>; + reg = <0x4000d000 0x400>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 93 0x400 0x01>, + <&dmamux1 94 0x400 0x01>; + dma-names = "rx", "rx-ctrl"; + access-controllers = <&etzpc 29>; + status = "disabled"; + }; + + usart2: serial@4000e000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000e000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x15>, + <&dmamux1 44 0x400 0x11>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 30>; + status = "disabled"; + }; + + usart3: serial@4000f000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000f000 0x400>; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART3_K>; + wakeup-source; + dmas = <&dmamux1 45 0x400 0x15>, + <&dmamux1 46 0x400 0x11>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 31>; + status = "disabled"; + }; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART4_K>; + wakeup-source; + dmas = <&dmamux1 63 0x400 0x15>, + <&dmamux1 64 0x400 0x11>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 32>; + status = "disabled"; + }; + + uart5: serial@40011000 { + compatible = "st,stm32h7-uart"; + reg = <0x40011000 0x400>; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART5_K>; + wakeup-source; + dmas = <&dmamux1 65 0x400 0x15>, + <&dmamux1 66 0x400 0x11>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 33>; + status = "disabled"; + }; + + i2c1: i2c@40012000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x40012000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C1_K>; + resets = <&rcc I2C1_R>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x1>; + wakeup-source; + i2c-analog-filter; + access-controllers = <&etzpc 34>; + status = "disabled"; + }; + + i2c2: i2c@40013000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x40013000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + wakeup-source; + i2c-analog-filter; + access-controllers = <&etzpc 35>; + status = "disabled"; + }; + + i2c3: i2c@40014000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x40014000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C3_K>; + resets = <&rcc I2C3_R>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x4>; + wakeup-source; + i2c-analog-filter; + access-controllers = <&etzpc 36>; + status = "disabled"; + }; + + i2c5: i2c@40015000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x40015000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C5_K>; + resets = <&rcc I2C5_R>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x10>; + wakeup-source; + i2c-analog-filter; + access-controllers = <&etzpc 37>; + status = "disabled"; + }; + + cec: cec@40016000 { + compatible = "st,stm32-cec"; + reg = <0x40016000 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CEC_K>, <&rcc CEC>; + clock-names = "cec", "hdmi-cec"; + access-controllers = <&etzpc 38>; + status = "disabled"; + }; + + dac: dac@40017000 { + compatible = "st,stm32h7-dac-core"; + reg = <0x40017000 0x400>; + clocks = <&rcc DAC12>; + clock-names = "pclk"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&etzpc 39>; + status = "disabled"; + + dac1: dac@1 { + compatible = "st,stm32-dac"; + #io-channel-cells = <1>; + reg = <1>; + status = "disabled"; + }; + + dac2: dac@2 { + compatible = "st,stm32-dac"; + #io-channel-cells = <1>; + reg = <2>; + status = "disabled"; + }; + }; + + uart7: serial@40018000 { + compatible = "st,stm32h7-uart"; + reg = <0x40018000 0x400>; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART7_K>; + wakeup-source; + dmas = <&dmamux1 79 0x400 0x15>, + <&dmamux1 80 0x400 0x11>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 40>; + status = "disabled"; + }; + + uart8: serial@40019000 { + compatible = "st,stm32h7-uart"; + reg = <0x40019000 0x400>; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART8_K>; + wakeup-source; + dmas = <&dmamux1 81 0x400 0x15>, + <&dmamux1 82 0x400 0x11>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 41>; + status = "disabled"; + }; + + timers1: timer@44000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44000000 0x400>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc TIM1_K>; + clock-names = "int"; + dmas = <&dmamux1 11 0x400 0x1>, + <&dmamux1 12 0x400 0x1>, + <&dmamux1 13 0x400 0x1>, + <&dmamux1 14 0x400 0x1>, + <&dmamux1 15 0x400 0x1>, + <&dmamux1 16 0x400 0x1>, + <&dmamux1 17 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; + access-controllers = <&etzpc 48>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32h7-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers8: timer@44001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44001000 0x400>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc TIM8_K>; + clock-names = "int"; + dmas = <&dmamux1 47 0x400 0x1>, + <&dmamux1 48 0x400 0x1>, + <&dmamux1 49 0x400 0x1>, + <&dmamux1 50 0x400 0x1>, + <&dmamux1 51 0x400 0x1>, + <&dmamux1 52 0x400 0x1>, + <&dmamux1 53 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; + access-controllers = <&etzpc 49>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32h7-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + usart6: serial@44003000 { + compatible = "st,stm32h7-uart"; + reg = <0x44003000 0x400>; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART6_K>; + wakeup-source; + dmas = <&dmamux1 71 0x400 0x15>, + <&dmamux1 72 0x400 0x11>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 51>; + status = "disabled"; + }; + + i2s1: audio-controller@44004000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 52>; + status = "disabled"; + }; + + spi1: spi@44004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + dmas = <&dmamux1 37 0x400 0x05>, + <&dmamux1 38 0x400 0x05>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 52>; + status = "disabled"; + }; + + spi4: spi@44005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44005000 0x400>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + dmas = <&dmamux1 83 0x400 0x05>, + <&dmamux1 84 0x400 0x05>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 53>; + status = "disabled"; + }; + + timers15: timer@44006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44006000 0x400>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM15_K>; + clock-names = "int"; + dmas = <&dmamux1 105 0x400 0x1>, + <&dmamux1 106 0x400 0x1>, + <&dmamux1 107 0x400 0x1>, + <&dmamux1 108 0x400 0x1>; + dma-names = "ch1", "up", "trig", "com"; + access-controllers = <&etzpc 54>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@14 { + compatible = "st,stm32h7-timer-trigger"; + reg = <14>; + status = "disabled"; + }; + }; + + timers16: timer@44007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44007000 0x400>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM16_K>; + clock-names = "int"; + dmas = <&dmamux1 109 0x400 0x1>, + <&dmamux1 110 0x400 0x1>; + dma-names = "ch1", "up"; + access-controllers = <&etzpc 55>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@15 { + compatible = "st,stm32h7-timer-trigger"; + reg = <15>; + status = "disabled"; + }; + }; + + timers17: timer@44008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44008000 0x400>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc TIM17_K>; + clock-names = "int"; + dmas = <&dmamux1 111 0x400 0x1>, + <&dmamux1 112 0x400 0x1>; + dma-names = "ch1", "up"; + access-controllers = <&etzpc 56>; + status = "disabled"; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@16 { + compatible = "st,stm32h7-timer-trigger"; + reg = <16>; + status = "disabled"; + }; + }; + + spi5: spi@44009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44009000 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + dmas = <&dmamux1 85 0x400 0x05>, + <&dmamux1 86 0x400 0x05>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 57>; + status = "disabled"; + }; + + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI1_R>; + access-controllers = <&etzpc 58>; + status = "disabled"; + + sai1a: audio-controller@4400a004 { + #sound-dai-cells = <0>; + + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x20>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + status = "disabled"; + }; + + sai1b: audio-controller@4400a024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x20>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 88 0x400 0x01>; + status = "disabled"; + }; + }; + + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400b000 0x400>; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI2_R>; + access-controllers = <&etzpc 59>; + status = "disabled"; + + sai2a: audio-controller@4400b004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x20>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 89 0x400 0x01>; + status = "disabled"; + }; + + sai2b: audio-controller@4400b024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x20>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 90 0x400 0x01>; + status = "disabled"; + }; + }; + + sai3: sai@4400c000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400c000 0x400>; + reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI3_R>; + access-controllers = <&etzpc 60>; + status = "disabled"; + + sai3a: audio-controller@4400c004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x20>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 113 0x400 0x01>; + status = "disabled"; + }; + + sai3b: audio-controller@4400c024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x20>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 114 0x400 0x01>; + status = "disabled"; + }; + }; + + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>; + clock-names = "dfsdm"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&etzpc 61>; + status = "disabled"; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm2: filter@2 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 103 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm3: filter@3 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <3>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 104 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm4: filter@4 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <4>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 91 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm5: filter@5 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <5>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 92 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + dma1: dma-controller@48000000 { + compatible = "st,stm32-dma"; + reg = <0x48000000 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + access-controllers = <&etzpc 88>; + }; + + dma2: dma-controller@48001000 { + compatible = "st,stm32-dma"; + reg = <0x48001000 0x400>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + access-controllers = <&etzpc 89>; + }; + + dmamux1: dma-router@48002000 { + compatible = "st,stm32h7-dmamux"; + reg = <0x48002000 0x40>; + #dma-cells = <3>; + dma-requests = <128>; + dma-masters = <&dma1 &dma2>; + dma-channels = <16>; + clocks = <&rcc DMAMUX>; + resets = <&rcc DMAMUX_R>; + access-controllers = <&etzpc 90>; + }; + + adc: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + interrupt-controller; + st,syscfg = <&syscfg>; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&etzpc 72>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + interrupt-parent = <&adc>; + interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100>; + interrupt-parent = <&adc>; + interrupts = <1>; + dmas = <&dmamux1 10 0x400 0x01>; + dma-names = "rx"; + nvmem-cells = <&vrefint>; + nvmem-cell-names = "vrefint"; + status = "disabled"; + channel@13 { + reg = <13>; + label = "vrefint"; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + }; + }; + }; + + sdmmc3: mmc@48004000 { + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00253180>; + reg = <0x48004000 0x400>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SDMMC3_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC3_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + access-controllers = <&etzpc 86>; + status = "disabled"; + }; + + usbotg_hs: usb-otg@49000000 { + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; + reg = <0x49000000 0x10000>; + clocks = <&rcc USBO_K>, <&usbphyc>; + clock-names = "otg", "utmi"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 16 16 16 16 16 16 16>; + dr_mode = "otg"; + otg-rev = <0x200>; + usb33d-supply = <&usb33>; + access-controllers = <&etzpc 85>; + status = "disabled"; + }; + + dcmi: dcmi@4c006000 { + compatible = "st,stm32-dcmi"; + reg = <0x4c006000 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc CAMITF_R>; + clocks = <&rcc DCMI>; + clock-names = "mclk"; + dmas = <&dmamux1 75 0x400 0x01>; + dma-names = "tx"; + access-controllers = <&etzpc 70>; + status = "disabled"; + }; + + lptimer2: timer@50021000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50021000 0x400>; + interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM2_K>; + clock-names = "mux"; + wakeup-source; + access-controllers = <&etzpc 64>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@1 { + compatible = "st,stm32-lptimer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + + lptimer3: timer@50022000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50022000 0x400>; + interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM3_K>; + clock-names = "mux"; + wakeup-source; + access-controllers = <&etzpc 65>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@2 { + compatible = "st,stm32-lptimer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + lptimer4: timer@50023000 { + compatible = "st,stm32-lptimer"; + reg = <0x50023000 0x400>; + interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM4_K>; + clock-names = "mux"; + wakeup-source; + access-controllers = <&etzpc 66>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + lptimer5: timer@50024000 { + compatible = "st,stm32-lptimer"; + reg = <0x50024000 0x400>; + interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM5_K>; + clock-names = "mux"; + wakeup-source; + access-controllers = <&etzpc 67>; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + vrefbuf: vrefbuf@50025000 { + compatible = "st,stm32-vrefbuf"; + reg = <0x50025000 0x8>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + clocks = <&rcc VREF>; + access-controllers = <&etzpc 69>; + status = "disabled"; + }; + + sai4: sai@50027000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50027000 0x400>; + reg = <0x50027000 0x4>, <0x500273f0 0x10>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI4_R>; + access-controllers = <&etzpc 68>; + status = "disabled"; + + sai4a: audio-controller@50027004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x20>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 99 0x400 0x01>; + status = "disabled"; + }; + + sai4b: audio-controller@50027024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x20>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 100 0x400 0x01>; + status = "disabled"; + }; + }; + + hash1: hash@54002000 { + compatible = "st,stm32f756-hash"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc HASH1>; + resets = <&rcc HASH1_R>; + dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>; + dma-names = "in"; + dma-maxburst = <2>; + access-controllers = <&etzpc 8>; + status = "disabled"; + }; + + rng1: rng@54003000 { + compatible = "st,stm32-rng"; + reg = <0x54003000 0x400>; + clocks = <&rcc RNG1_K>; + resets = <&rcc RNG1_R>; + access-controllers = <&etzpc 7>; + status = "disabled"; + }; + + fmc: memory-controller@58002000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + access-controllers = <&etzpc 91>; + status = "disabled"; + + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + + nand-controller@4,0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>, + <&mdma1 20 0x2 0x12000a08 0x0 0x0>, + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; + }; + + qspi: spi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>, + <&mdma1 22 0x2 0x10100008 0x0 0x0>; + dma-names = "tx", "rx"; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&etzpc 92>; + status = "disabled"; + }; + + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "eth-ck", + "ptp_ref", + "ethstp"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHCK_K>, + <&rcc ETHPTP_K>, + <&rcc ETHSTP>; + st,syscon = <&syscfg 0x4>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + access-controllers = <&etzpc 94>; + status = "disabled"; + + stmmac_axi_config_0: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + }; + + usart1: serial@5c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x5c000000 0x400>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART1_K>; + wakeup-source; + access-controllers = <&etzpc 3>; + status = "disabled"; + }; + + spi6: spi@5c001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x5c001000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI6_K>; + resets = <&rcc SPI6_R>; + dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>, + <&mdma1 35 0x0 0x40002 0x0 0x0>; + access-controllers = <&etzpc 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c4: i2c@5c002000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x5c002000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C4_K>; + resets = <&rcc I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x8>; + wakeup-source; + i2c-analog-filter; + access-controllers = <&etzpc 5>; + status = "disabled"; + }; + + i2c6: i2c@5c009000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x5c009000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C6_K>; + resets = <&rcc I2C6_R>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x20>; + wakeup-source; + i2c-analog-filter; + access-controllers = <&etzpc 12>; + status = "disabled"; + }; }; tamp: tamp@5c00a000 { diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts index 75874eafde11..8e1dd84e0c0a 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts @@ -28,16 +28,12 @@ }; }; -&pwm5_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ - }; +&{pwm5_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ }; -&pwm5_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ - }; +&{pwm5_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ }; &timers5 { diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts index c90d815f906b..3b33b7093b68 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts @@ -168,52 +168,42 @@ status = "okay"; }; -&sdmmc2_b4_od_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ - }; +&{sdmmc2_b4_od_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ }; -&sdmmc2_b4_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ - <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ - }; +&{sdmmc2_b4_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ }; -&sdmmc2_b4_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ - <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ - <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ - }; +&{sdmmc2_b4_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ }; -&sdmmc2_d47_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ - <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ - <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ - }; +&{sdmmc2_d47_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ }; -&sdmmc2_d47_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ - <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ - <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ - }; +&{sdmmc2_d47_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ }; &sdmmc3 { @@ -238,34 +228,28 @@ }; }; -&sdmmc3_b4_od_pins_b { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ - }; +&{sdmmc3_b4_od_pins_b/pins1} { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ }; -&sdmmc3_b4_pins_b { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ - <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ - }; +&{sdmmc3_b4_pins_b/pins1} { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ }; -&sdmmc3_b4_sleep_pins_b { - pins { - pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ - <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ - <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ - }; +&{sdmmc3_b4_sleep_pins_b/pins} { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ }; &spi1 { diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi index 3938d357e198..98a31c2b5d45 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi @@ -69,30 +69,27 @@ status = "okay"; }; -ðernet0_rmii_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ - <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ - <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ - }; - pins2 { - pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ - <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ - <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ - <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ - }; +&{ethernet0_rmii_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ }; -ðernet0_rmii_sleep_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ - <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ - <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ - <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ - <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ - <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ - <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ - }; +&{ethernet0_rmii_pins_a/pins2} { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ +}; + +&{ethernet0_rmii_sleep_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ }; &iwdg2 { @@ -122,12 +119,11 @@ }; }; -&qspi_bk1_pins_a { - pins1 { - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; +&{qspi_bk1_pins_a/pins} { + /delete-property/ bias-disable; + bias-pull-up; + drive-push-pull; + slew-rate = <1>; }; &rng1 { @@ -147,22 +143,24 @@ status = "okay"; }; -&sdmmc1_b4_od_pins_a { - pins1 { - bias-pull-up; - }; - pins2 { - bias-pull-up; - }; +&{sdmmc1_b4_od_pins_a/pins1} { + /delete-property/ bias-disable; + bias-pull-up; }; -&sdmmc1_b4_pins_a { - pins1 { - bias-pull-up; - }; - pins2 { - bias-pull-up; - }; +&{sdmmc1_b4_od_pins_a/pins2} { + /delete-property/ bias-disable; + bias-pull-up; +}; + +&{sdmmc1_b4_pins_a/pins1} { + /delete-property/ bias-disable; + bias-pull-up; +}; + +&{sdmmc1_b4_pins_a/pins2} { + /delete-property/ bias-disable; + bias-pull-up; }; &uart4 { @@ -175,34 +173,30 @@ status = "okay"; }; -&uart4_idle_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-pull-up; - }; +&{uart4_idle_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ }; -&uart4_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-pull-up; - }; +&{uart4_idle_pins_a/pins2} { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + /delete-property/ bias-disable; + bias-pull-up; }; -&uart4_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ - <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ - }; +&{uart4_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ + slew-rate = <0>; +}; + +&{uart4_pins_a/pins2} { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&{uart4_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ }; &usbh_ehci { diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts index ad25929e64e6..b6be61b159e7 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts @@ -36,18 +36,14 @@ }; }; -&i2c1_pins_a { - pins { - pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ - }; +&{i2c1_pins_a/pins} { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ }; -&i2c1_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ - }; +&{i2c1_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ }; &mdio0 { diff --git a/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts new file mode 100644 index 000000000000..a5ea1431c399 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include "stm32mp15x-mecio1-io.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic MECIO1r0"; + compatible = "prt,mecio1r0", "st,stm32mp151"; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +ðernet0 { + assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL3_Q>; + assigned-clock-parents = <&rcc PLL3_Q>; + assigned-clock-rates = <125000000>; /* Clock PLL3 to 625Mhz in tf-a. */ + st,eth-clk-sel; +}; diff --git a/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts new file mode 100644 index 000000000000..a1b8c3646e98 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic MECT1S"; + compatible = "prt,mect1s", "st,stm32mp151"; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = ðernet0; + ethernet1 = ðernet1; + ethernet2 = ðernet2; + ethernet3 = ðernet3; + ethernet4 = ðernet4; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v: regulator-v5v { + compatible = "regulator-fixed"; + regulator-name = "v5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <24000000>; +}; + +&clk_lse { + status = "disabled"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + st,eth-clk-sel; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + +&{ethernet0_rmii_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ +}; + +&{ethernet0_rmii_pins_a/pins2} { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ +}; + +&{ethernet0_rmii_sleep_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ +}; + +&mdio0 { + /* All this DP83TG720R PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TG720R */ + t1_phy0: ethernet-phy@8 { + compatible = "ethernet-phy-id2000.a284"; + reg = <8>; + interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy1: ethernet-phy@c { + compatible = "ethernet-phy-id2000.a284"; + reg = <12>; + interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy2: ethernet-phy@4 { + compatible = "ethernet-phy-id2000.a284"; + reg = <4>; + interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy3: ethernet-phy@d { + compatible = "ethernet-phy-id2000.a284"; + reg = <13>; + interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&{qspi_bk1_pins_a/pins} { + /delete-property/ bias-disable; + bias-pull-up; + drive-push-pull; + slew-rate = <1>; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet1: port@0 { + reg = <0>; + label = "t10"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy0>; + }; + + ethernet2: port@1 { + reg = <1>; + label = "t11"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy1>; + }; + + ethernet3: port@2 { + reg = <2>; + label = "t12"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy2>; + }; + + ethernet4: port@3 { + reg = <3>; + label = "t13"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy3>; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + /* RGMII mode is not working properly, using RMII instead. */ + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + vbus-supply = <&v5v>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&v3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&v3v3>; +}; diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts new file mode 100644 index 000000000000..39a3211c6133 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/dts-v1/; + +#include <arm/st/stm32mp151.dtsi> +#include <arm/st/stm32mp15xc.dtsi> +#include <arm/st/stm32mp15-pinctrl.dtsi> +#include <arm/st/stm32mp15xxad-pinctrl.dtsi> +#include <arm/st/stm32mp15-scmi.dtsi> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Plymovent AQM board"; + compatible = "ply,plyaqm", "st,stm32mp151"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + serial1 = &uart7; + }; + + codec { + compatible = "invensense,ics43432"; + + port { + codec_endpoint: endpoint { + remote-endpoint = <&i2s1_endpoint>; + dai-format = "i2s"; + }; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; /* WHITE_EN */ + color = <LED_COLOR_ID_WHITE>; + default-state = "on"; + }; + }; + + v3v3: fixed-regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v_sw: fixed-regulator-v5sw { + compatible = "regulator-fixed"; + regulator-name = "5v-switched"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpioe 10 GPIO_ACTIVE_HIGH>; /* 5V_SWITCHED_EN */ + startup-delay-us = <100000>; + enable-active-high; + regulator-boot-on; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@cfd00000 { + reg = <0xcfd00000 0x300000>; + no-map; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP15"; + dais = <&i2s1_port>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpioe 12 GPIO_ACTIVE_LOW>; /* WLAN_REG_ON */ + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_in10_pins_a>; + vdda-supply = <&v3v3>; + vref-supply = <&v3v3>; + status = "okay"; + + adc@0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@10 { /* NTC */ + reg = <10>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; + status = "okay"; +}; + +ðernet0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ðernet0_rmii_pins_d>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_d>; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + /* KSZ8081RNA PHY */ + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpiob 0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiob 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpioa { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "HWID_PL_N", "HWID_CP", ""; +}; + +&gpiob { + gpio-line-names = + "", "", "", "", "", "", "LED_LATCH", "", + "", "RELAY1_EN", "", "", "", "", "", ""; +}; + +&gpioc { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "HWID_Q7", "", ""; +}; + +&gpioe { + gpio-line-names = + "", "", "", "", "RELAY2_EN", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpiog { + gpio-line-names = + "", "", "", "", "", "", "", "SW1", + "", "", "", "", "", "", "", ""; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_c>; + pinctrl-1 = <&i2c1_sleep_pins_c>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&i2c6 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_pins_b>; + pinctrl-1 = <&i2c6_sleep_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + clocks = <&scmi_clk CK_SCMI_I2C6>; + resets = <&scmi_reset RST_SCMI_I2C6>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pressure-sensor@47 { + compatible = "bosch,bmp580"; + reg = <0x47>; + vdda-supply = <&v5v_sw>; + vddd-supply = <&v5v_sw>; + }; + + co2-sensor@62 { + compatible = "sensirion,scd41"; + reg = <0x62>; + vdd-supply = <&v5v_sw>; + }; + + pm-sensor@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; + }; +}; + +&i2s1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s1_pins_a>; + pinctrl-1 = <&i2s1_sleep_pins_a>; + clocks = <&rcc SPI1>, <&rcc SPI1_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + #clock-cells = <0>; /* Set I2S2 as master clock provider */ + status = "okay"; + + i2s1_port: port { + i2s1_endpoint: endpoint { + format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&codec_endpoint>; + }; + }; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; + status = "okay"; +}; + +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; + status = "okay"; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +/* SD card without Card-detect */ +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +/* EMMC */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_c &sdmmc2_d47_pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_c &sdmmc2_d47_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_c &sdmmc2_d47_sleep_pins_b>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +/* Wifi */ +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_c>; + pinctrl-1 = <&sdmmc3_b4_od_pins_c>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_c>; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&timers5 { + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pwm { + pinctrl-0 = <&pwm1_pins_d>; + pinctrl-1 = <&pwm1_sleep_pins_d>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_e>; + pinctrl-1 = <&uart4_idle_pins_e>; + pinctrl-2 = <&uart4_sleep_pins_e>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_d>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>; /* BT_REG_ON */ + max-speed = <4000000>; + vbat-supply = <&v3v3>; + vddio-supply = <&v3v3>; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; /* BT_HOST_WAKE */ + interrupt-names = "host-wakeup"; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi index 486084e0b80b..4640dafb1598 100644 --- a/arch/arm/boot/dts/st/stm32mp153.dtsi +++ b/arch/arm/boot/dts/st/stm32mp153.dtsi @@ -28,32 +28,34 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; +}; - soc { - m_can1: can@4400e000 { - compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x1400>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; - status = "disabled"; - }; +&etzpc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + access-controllers = <&etzpc 62>; + status = "disabled"; + }; - m_can2: can@4400f000 { - compatible = "bosch,m_can"; - reg = <0x4400f000 0x400>, <0x44011000 0x2800>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; - status = "disabled"; - }; + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + access-controllers = <&etzpc 62>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts new file mode 100644 index 000000000000..3a0e84262424 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) 2024 Leonard Göhrs, Pengutronix + */ + +/dts-v1/; + +#include "stm32mp153c-lxa-fairytux2.dtsi" + +/ { + model = "Linux Automation GmbH FairyTux 2 Gen 1"; + compatible = "lxa,stm32mp153c-fairytux2-gen1", "oct,stm32mp153x-osd32", "st,stm32mp153"; + + gpio-keys { + compatible = "gpio-keys"; + + button-left { + label = "USER_BTN1"; + linux,code = <KEY_ESC>; + gpios = <&gpioi 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + + button-right { + label = "USER_BTN2"; + linux,code = <KEY_HOME>; + gpios = <&gpioe 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; +}; + +&gpiof { + gpio-line-names = "GPIO1", "GPIO2", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&gpioh { + gpio-line-names = "", "", "", "", "LCD_RESET", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "", "GPIO3", "", /* 10 */ + ""; /* 15 */ +}; + +&gpioi { + gpio-line-names = "", "", "", "", "", /* 0 */ + "", "", "", "ETH_", "", /* 5 */ + "", "USER_BTN1"; /* 10 */ +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-1 = <&i2c1_sleep_pins_b>; + status = "okay"; + + io_board_gpio: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&v3v3_hdmi>; + gpio-line-names = "LED1_GA_YK", "LED2_GA_YK", "LED1_GK_YA", "LED2_GK_YA", + "RS485_EN", "RS485_120R", "", "CAN_120R"; + }; +}; + +&led_controller_io { + /* + * led-2 and led-3 are internally connected antiparallel to one + * another inside the ethernet jack like this: + * GPIO1 ---+---|led-2|>--+--- GPIO3 + * +--<|led-3|---+ + * E.g. only one of the LEDs can be illuminated at a time while + * the other output must be driven low. + * This should likely be implemented using a multi color LED + * driver for antiparallel LEDs. + */ + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_ACTIVITY; + gpios = <&io_board_gpio 1 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_ACTIVITY; + gpios = <&io_board_gpio 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&usart3 { + /* + * On Gen 1 FairyTux 2 only RTS can be used and not CTS as well, + * Because pins PD11 (CTS) and PI11 (USER_BTN1) share the same + * interrupt and only one of them can be used at a time. + */ + rts-gpios = <&gpiod 12 GPIO_ACTIVE_LOW>; +}; + +&usbotg_hs { + dr_mode = "peripheral"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts new file mode 100644 index 000000000000..66e6da912508 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) 2024 Leonard Göhrs, Pengutronix + */ + +/dts-v1/; + +#include "stm32mp153c-lxa-fairytux2.dtsi" + +/ { + model = "Linux Automation GmbH FairyTux 2 Gen 2"; + compatible = "lxa,stm32mp153c-fairytux2-gen2", "oct,stm32mp153x-osd32", "st,stm32mp153"; + + gpio-keys { + compatible = "gpio-keys"; + + button-left { + label = "USER_BTN1"; + linux,code = <KEY_ESC>; + gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + + button-right { + label = "USER_BTN2"; + linux,code = <KEY_HOME>; + gpios = <&gpioe 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; +}; + +&gpiof { + gpio-line-names = "", "", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&gpioh { + gpio-line-names = "", "", "", "", "LCD_RESET", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "GPIO1", "GPIO_INT", "", /* 10 */ + ""; /* 15 */ +}; + +&gpioi { + gpio-line-names = "GPIO2", "", "", "", "", /* 0 */ + "", "", "", "ETH_", "", /* 5 */ + "", "USER_BTN1"; /* 10 */ +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-1 = <&i2c1_sleep_pins_b>; + status = "okay"; + + io_board_gpio: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpioh>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + pinctrl-names = "default"; + pinctrl-0 = <&board_tca6408_pins>; + #interrupt-cells = <2>; + vcc-supply = <&v3v3_hdmi>; + gpio-line-names = "LED1_GA_YK", "LED2_GA_YK", "LED1_GK_YA", "USB_CC_ALERT", + "RS485_EN", "RS485_120R", "USB_CC_RESET", "CAN_120R"; + }; + + usb_c: typec@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupt-parent = <&io_board_gpio>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <®_5v>; + vsys-supply = <&v3v3_hdmi>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + typec-power-opmode = "default"; + + port { + con_usbotg_hs_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + + temperature-sensor@48 { + compatible = "national,lm75a"; + reg = <0x48>; + /* + * The sensor itself is powered by a voltage divider from the + * always-on 5V supply. + * The required pull-up resistors however are on v3v3_hdmi. + */ + vs-supply = <&v3v3_hdmi>; + }; + + io_board_eeprom: eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + vcc-supply = <&v3v3_hdmi>; + }; +}; + +&rtc { + status = "okay"; +}; + +&led_controller_io { + led-2 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_ACTIVITY; + gpios = <&io_board_gpio 1 GPIO_ACTIVE_LOW>; + }; +}; + +&usart3 { + rts-gpios = <&gpiod 12 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpiod 11 GPIO_ACTIVE_LOW>; +}; + +&usbotg_hs { + usb-role-switch; + + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usbotg_hs_ep>; + }; + }; +}; + +&pinctrl { + board_tca6408_pins: stusb1600-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, GPIO)>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi new file mode 100644 index 000000000000..9eeb9d6b5eb0 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2021 Rouven Czerwinski, Pengutronix + * Copyright (C) 2023, 2024 Leonard Göhrs, Pengutronix + */ + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-osd32.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + can0 = &m_can1; + ethernet0 = ðernet0; + i2c0 = &i2c1; + i2c1 = &i2c4; + mmc1 = &sdmmc2; + serial0 = &uart4; + serial1 = &usart3; + spi0 = &spi4; + }; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&v3v3>; + + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <7>; + pwms = <&led_pwm 3 1000000 0>; + }; + + led-controller-cpu { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + led_controller_io: led-controller-io { + compatible = "gpio-leds"; + + /* + * led-0 and led-1 are internally connected antiparallel to one + * another inside the ethernet jack like this: + * GPIO0 ---+---|led-0|>--+--- GPIO2 + * +--<|led-1|---+ + * E.g. only one of the LEDs can be illuminated at a time while + * the other output must be driven low. + * This should likely be implemented using a multi color LED + * driver for antiparallel LEDs. + */ + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&io_board_gpio 0 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_LAN; + gpios = <&io_board_gpio 2 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_1v2: regulator-1v2 { + compatible = "regulator-fixed"; + regulator-name = "1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <®_5v>; + }; +}; + +baseboard_eeprom: &sip_eeprom { +}; + +&crc1 { + status = "okay"; +}; + +&cryp1 { + status = "okay"; +}; + +&dts { + status = "okay"; +}; + +ðernet0 { + assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ðernet0_rgmii_pins_b>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_b>; + + st,eth-clk-sel; + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { /* KSZ9031RN */ + reg = <3>; + reset-gpios = <&gpioe 11 GPIO_ACTIVE_LOW>; /* ETH_RST# */ + interrupt-parent = <&gpioa>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */ + reset-assert-us = <10000>; + reset-deassert-us = <300>; + micrel,force-master; + }; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", "", /* 0 */ + "", "ETH_INT", "", "", "", /* 5 */ + "", "", "", "BOOTROM_LED", "", /* 10 */ + ""; /* 15 */ +}; + +&gpiob { + gpio-line-names = "", "", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&gpioc { + gpio-line-names = "", "", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", ""; /* 10 */ +}; + +&gpiod { + gpio-line-names = "", "", "", "", "", /* 0 */ + "", "", "LCD_TE", "", "", /* 5 */ + "LCD_DC", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&gpioe { + gpio-line-names = "LCD_CS", "", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&gpiof { + gpio-line-names = "GPIO1", "GPIO2", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&gpiog { + gpio-line-names = "", "", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&gpioz { + gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", /* 0 */ + "", "HWID4", "HWID5"; /* 5 */ +}; + +&hash1 { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <8>; + status = "okay"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_b>; + pinctrl-1 = <&m_can1_sleep_pins_b>; + status = "okay"; + termination-gpios = <&io_board_gpio 7 GPIO_ACTIVE_HIGH>; + termination-ohms = <120>; +}; + +&pmic { + regulators { + buck1-supply = <®_5v>; /* VIN */ + buck2-supply = <®_5v>; /* VIN */ + buck3-supply = <®_5v>; /* VIN */ + buck4-supply = <®_5v>; /* VIN */ + ldo2-supply = <®_5v>; /* PMIC_LDO25IN */ + ldo4-supply = <®_5v>; /* VIN */ + ldo5-supply = <®_5v>; /* PMIC_LDO25IN */ + vref_ddr-supply = <®_5v>; /* VIN */ + boost-supply = <®_5v>; /* PMIC_BSTIN */ + pwr_sw2-supply = <&bst_out>; /* PMIC_SWIN */ + }; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; + vmmc-supply = <&v3v3>; + + bus-width = <8>; + mmc-ddr-3_3v; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + + status = "okay"; +}; + +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins_a>; + cs-gpios = <&gpioe 0 GPIO_ACTIVE_LOW>; + status = "okay"; + + lcd: display@0 { + compatible = "shineworld,lh133k", "panel-mipi-dbi-spi"; + reg = <0>; + power-supply = <&v3v3>; + io-supply = <&v3v3>; + backlight = <&backlight>; + dc-gpios = <&gpiod 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpioh 4 GPIO_ACTIVE_HIGH>; + spi-3wire; + spi-max-frequency = <32000000>; + + width-mm = <23>; + height-mm = <23>; + rotation = <180>; + + panel-timing { + hactive = <240>; + vactive = <240>; + hback-porch = <0>; + vback-porch = <0>; + + clock-frequency = <0>; + hfront-porch = <0>; + hsync-len = <0>; + vfront-porch = <0>; + vsync-len = <0>; + }; + }; +}; + +&timers2 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; + + timer@1 { + status = "okay"; + }; +}; + +&timers3 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; + + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; + + timer@3 { + status = "okay"; + }; +}; + +&timers8 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; + + led_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm8_pins_b>; + pinctrl-1 = <&pwm8_sleep_pins_b>; + status = "okay"; + }; +}; + +&uart4 { + label = "debug"; + + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; +}; + +&usart3 { + label = "external"; + + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + + status = "okay"; +}; + +&usbotg_hs { + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + + vusb_d-supply = <&vdd_usb>; + vusb_a-supply = <®18>; + + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; + +&v3v3_hdmi { + regulator-enable-ramp-delay = <1000>; +}; diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts new file mode 100644 index 000000000000..a40b0eae8da3 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2021 Rouven Czerwinski, Pengutronix + * Copyright (C) 2023, 2024 Leonard Göhrs, Pengutronix + */ + +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc-lxa-tac.dtsi" + +/ { + model = "Linux Automation Test Automation Controller (TAC) Gen 3"; + compatible = "lxa,stm32mp153c-tac-gen3", "oct,stm32mp153x-osd32", "st,stm32mp153"; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&v3v3>; + + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <7>; + pwms = <&led_pwm 3 1000000 0>; + }; + + reg_iobus_12v: regulator-iobus-12v { + compatible = "regulator-fixed"; + vin-supply = <®_12v>; + gpio = <&gpioh 13 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "12V_IOBUS"; + }; + + led-controller-1 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + max-brightness = <65535>; + + led-red { + active-low; + color = <LED_COLOR_ID_RED>; + pwms = <&led_pwm 0 1000000 0>; + }; + + led-green { + active-low; + color = <LED_COLOR_ID_GREEN>; + pwms = <&led_pwm 2 1000000 0>; + }; + + led-blue { + active-low; + color = <LED_COLOR_ID_BLUE>; + pwms = <&led_pwm 1 1000000 0>; + }; + }; + }; + + led-controller-2 { + compatible = "gpio-leds"; + + led-5 { + label = "tac:green:iobus"; + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; + }; + + led-6 { + label = "tac:green:can"; + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; + }; + + led-7 { + label = "tac:green:out0"; + gpios = <&gpiob 8 GPIO_ACTIVE_HIGH>; + }; + + led-8 { + label = "tac:green:out1"; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + }; + + led-9 { + label = "tac:green:uarttx"; + gpios = <&gpiod 3 GPIO_ACTIVE_HIGH>; + }; + + led-10 { + label = "tac:green:uartrx"; + gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>; + }; + + led-11 { + label = "tac:green:usbh1"; + gpios = <&gpioc 8 GPIO_ACTIVE_HIGH>; + }; + + led-12 { + label = "tac:green:usbh2"; + gpios = <&gpiod 6 GPIO_ACTIVE_HIGH>; + }; + + led-13 { + label = "tac:green:usbh3"; + gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>; + }; + + led-14 { + label = "tac:green:usbg"; + gpios = <&gpiod 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usb-gadget"; + }; + + led-15 { + label = "tac:green:dutpwr"; + gpios = <&gpioa 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&board_adc1_ain_pins>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vrefbuf>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <2 5 9 10 13 14 15 18>; + st,min-sample-time-nsecs = <5000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@2 { + reg = <2>; + label = "OUT_0_FB"; + }; + + channel@5 { + reg = <5>; + label = "IOBUS_CURR_FB"; + }; + + channel@9 { + reg = <9>; + label = "IOBUS_VOLT_FB"; + }; + + channel@10 { + reg = <10>; + label = "OUT_1_FB"; + }; + + channel@13 { + reg = <13>; + label = "HOST_CURR_FB"; + }; + + channel@14 { + reg = <14>; + label = "HOST_3_CURR_FB"; + }; + + channel@15 { + reg = <15>; + label = "HOST_1_CURR_FB"; + }; + + channel@18 { + reg = <18>; + label = "HOST_2_CURR_FB"; + }; + }; + + adc2: adc@100 { + st,adc-channels = <12>; + st,min-sample-time-nsecs = <500000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@12 { + reg = <12>; + label = "TEMP_INTERNAL"; + }; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", "", /* 0 */ + "ETH_GPIO1", "ETH_INT", "", "", "", /* 5 */ + "", "", "", "BOOTROM_LED", "ETH_LAB_LEDRP", /* 10 */ + ""; /* 15 */ +}; + +&gpioc { + gpio-line-names = "", "DUT_PWR_DISCH", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", ""; /* 10 */ +}; + +&gpioe { + gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */ + "", "", "USER_BTN2", "DUT_PWR_EN", "UART_TX_EN", /* 5 */ + "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */ + "TP27"; /* 15 */ +}; + +&gpiog { + gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */ + "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */ + "POWER_ADC_RESET", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + +&m_can2 { + termination-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>; + termination-ohms = <120>; +}; + +&pinctrl { + board_adc1_ain_pins: board-adc1-ain-0 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */ + <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1_INP13 */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ADC1_INP14 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */ + <STM32_PINMUX('A', 4, ANALOG)>; /* ADC1_INP18 */ + }; + }; +}; + +&spi2 { + adc@0 { + compatible = "ti,lmp92064"; + reg = <0>; + + reset-gpios = <&gpiog 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + shunt-resistor-micro-ohms = <15000>; + spi-max-frequency = <5000000>; + vdd-supply = <®_pb_3v3>; + vdig-supply = <®_pb_3v3>; + }; +}; + +&timers8 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; + + led_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm8_pins_b>; + pinctrl-1 = <&pwm8_sleep_pins_b>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts new file mode 100644 index 000000000000..16b814c19350 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include "stm32mp15x-mecio1-io.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic MECIO1r1"; + compatible = "prt,mecio1r1", "st,stm32mp153"; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <24000000>; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_b>; + pinctrl-1 = <&m_can1_sleep_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts index 306e1bc2a514..847b360f02fc 100644 --- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts @@ -62,6 +62,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts index 956da5f26c1c..43280289759d 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts @@ -68,6 +68,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts index 7a701f7ef0c7..324f7bb988d1 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts @@ -24,6 +24,11 @@ chosen { stdout-path = "serial0:115200n8"; }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>; + }; }; &cryp1 { @@ -62,7 +67,7 @@ touchscreen@38 { compatible = "focaltech,ft6236"; reg = <0x38>; - interrupts = <2 2>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpiof>; touchscreen-size-x = <480>; touchscreen-size-y = <800>; @@ -84,10 +89,54 @@ }; }; +&rtc { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_rsvd_pins_a>; + + rtc_lsco_pins_a: rtc-lsco-0 { + pins = "out2_rmp"; + function = "lsco"; + }; +}; + +/* Wifi */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + non-removable; + cap-sdio-irq; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_lsco_pins_a>; + }; +}; + +/* Bluetooth */ &usart2 { pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&usart2_pins_c>; pinctrl-1 = <&usart2_sleep_pins_c>; pinctrl-2 = <&usart2_idle_pins_c>; - status = "disabled"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + vbat-supply = <&v3v3>; + vddio-supply = <&v3v3>; + }; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts index 8e4b0db198c2..6f27d794d270 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts @@ -67,6 +67,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts index 66ed5f9921ba..9cf5ed111b52 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts @@ -10,6 +10,7 @@ #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/mfd/st,stpmic1.h> / { @@ -71,6 +72,17 @@ }; }; + led { + compatible = "gpio-leds"; + led-blue { + gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + }; + }; + sd_switch: regulator-sd_switch { compatible = "regulator-gpio"; regulator-name = "sd_switch"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts index 72b9cab2d990..6ae391bffee5 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts @@ -72,6 +72,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts index 9eb9a1bf4f2c..8f99c30f1af1 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts @@ -306,6 +306,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm2_pins_a>; pinctrl-1 = <&pwm2_sleep_pins_a>; @@ -321,6 +324,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm8_pins_a>; pinctrl-1 = <&pwm8_sleep_pins_a>; @@ -336,6 +342,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm12_pins_a>; pinctrl-1 = <&pwm12_sleep_pins_a>; diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts index 81f254fb88b0..e72e42eb0eb4 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts @@ -35,6 +35,76 @@ }; }; +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_ain_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vrefbuf>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <0 1 2 5 9 10 13 15>; + st,min-sample-time-nsecs = <5000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + reg = <0>; + label = "HOST_2_CURR_FB"; + }; + + channel@1 { + reg = <1>; + label = "HOST_3_CURR_FB"; + }; + + channel@2 { + reg = <2>; + label = "OUT_0_FB"; + }; + + channel@5 { + reg = <5>; + label = "IOBUS_CURR_FB"; + }; + + channel@9 { + reg = <9>; + label = "IOBUS_VOLT_FB"; + }; + + channel@10 { + reg = <10>; + label = "OUT_1_FB"; + }; + + channel@13 { + reg = <13>; + label = "HOST_CURR_FB"; + }; + + channel@15 { + reg = <15>; + label = "HOST_1_CURR_FB"; + }; + }; + + adc2: adc@100 { + st,adc-channels = <12>; + st,min-sample-time-nsecs = <500000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@12 { + reg = <12>; + label = "TEMP_INTERNAL"; + }; + }; +}; + &gpioa { gpio-line-names = "", "", "STACK_CS2", "", "STACK_CS3", /* 0 */ "ETH_GPIO1", "ETH_INT", "", "", "", /* 5 */ @@ -48,6 +118,20 @@ "", ""; /* 10 */ }; +&gpioe { + gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */ + "", "", "USER_BTN2", "TP48", "UART_TX_EN", /* 5 */ + "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */ + "TP27"; /* 15 */ +}; + +&gpiog { + gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */ + "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */ + "TP49", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + &gpu { status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts index 4cc177031661..2ae281725a48 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts @@ -121,6 +121,76 @@ }; }; +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_ain_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vrefbuf>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <0 1 2 5 9 10 13 15>; + st,min-sample-time-nsecs = <5000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + reg = <0>; + label = "HOST_2_CURR_FB"; + }; + + channel@1 { + reg = <1>; + label = "HOST_3_CURR_FB"; + }; + + channel@2 { + reg = <2>; + label = "OUT_0_FB"; + }; + + channel@5 { + reg = <5>; + label = "IOBUS_CURR_FB"; + }; + + channel@9 { + reg = <9>; + label = "IOBUS_VOLT_FB"; + }; + + channel@10 { + reg = <10>; + label = "OUT_1_FB"; + }; + + channel@13 { + reg = <13>; + label = "HOST_CURR_FB"; + }; + + channel@15 { + reg = <15>; + label = "HOST_1_CURR_FB"; + }; + }; + + adc2: adc@100 { + st,adc-channels = <12>; + st,min-sample-time-nsecs = <500000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@12 { + reg = <12>; + label = "TEMP_INTERNAL"; + }; + }; +}; + &gpioa { gpio-line-names = "", "", "DUT_PWR_EN", "", "STACK_CS3", /* 0 */ "ETH_GPIO1", "ETH_INT", "", "", "", /* 5 */ @@ -134,6 +204,20 @@ "", ""; /* 10 */ }; +&gpioe { + gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */ + "", "", "USER_BTN2", "TP48", "UART_TX_EN", /* 5 */ + "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */ + "TP27"; /* 15 */ +}; + +&gpiog { + gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */ + "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */ + "TP49", "", "", "", "", /* 10 */ + ""; /* 15 */ +}; + &gpu { status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts index 527c33be66cc..36e6055b5665 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts @@ -147,11 +147,6 @@ status = "okay"; }; -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - &rtc { status = "okay"; }; @@ -211,11 +206,3 @@ &usbphyc { status = "okay"; }; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; diff --git a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi new file mode 100644 index 000000000000..915ba2526f45 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ + +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial0:1500000n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = ðernet0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xC0000000 0x10000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v: regulator-v5v { + compatible = "regulator-fixed"; + regulator-name = "v5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc12_pins_mecsbc>; + pinctrl-names = "default"; + vdd-supply = <&v3v3>; + vdda-supply = <&v3v3>; + vref-supply = <&v3v3>; + status = "okay"; +}; + +&adc1 { + status = "okay"; + + channel@0 { + reg = <0>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <5000>; + label = "p24v_stp"; + }; + + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + label = "p24v_hpdcm"; + }; + + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + label = "ain0"; + }; + + channel@3 { + reg = <3>; + st,min-sample-time-ns = <5000>; + label = "hpdcm1_i2"; + }; + + channel@5 { + reg = <5>; + st,min-sample-time-ns = <5000>; + label = "hpout1_i"; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + label = "ain1"; + }; + + channel@9 { + reg = <9>; + st,min-sample-time-ns = <5000>; + label = "hpout0_i"; + }; + + channel@10 { + reg = <10>; + st,min-sample-time-ns = <5000>; + label = "phint0_ain"; + }; + + channel@13 { + reg = <13>; + st,min-sample-time-ns = <5000>; + label = "phint1_ain"; + }; + + channel@15 { + reg = <15>; + st,min-sample-time-ns = <5000>; + label = "hpdcm0_i1"; + }; + + channel@16 { + reg = <16>; + st,min-sample-time-ns = <5000>; + label = "lsin"; + }; + + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + label = "hpdcm0_i2"; + }; + + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + label = "hpdcm1_i1"; + }; +}; + +&adc2 { + status = "okay"; + + channel@2 { + reg = <2>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <5000>; + label = "ain2"; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + label = "ain3"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_x>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_x>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + st,eth-clk-sel; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@8 { + reg = <8>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + }; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_d_mecsbc>; +}; + +&gpioe { + gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "", + "", "", "HPOUT1_RESETN", + "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN", + "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN", + "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN"; +}; + +&gpiof { + gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN", + "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN", + "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "", + "GPIO0_RESETN", "", "", "", + "", "", "", ""; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "", + "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "", + "", "", "", ""; +}; + +&gpioj { + gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13", + "HSIN14", "HSIN15", "", "", + "", "", "", "", + "", "RTD_RESETN", "", ""; +}; + +&gpiok { + gpio-line-names = "", "", "HSIN0", "HSIN1", + "HSIN2", "HSIN3", "HSIN4", "HSIN5"; +}; + +&gpioz { + gpio-line-names = "", "", "", "HSIN6", + "HSIN7", "HSIN8", "HSIN9", ""; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + status = "okay"; + + gpio0: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS", + "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL", + "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN9_BIAS", + "", "", "", ""; + }; + + gpio1: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS", + "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL", + "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS", + "", "", "LSIN8_BIAS", "LSIN9_BIAS"; + }; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&{qspi_bk1_pins_a/pins} { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&timers1 { + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + hpdcm0_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm1_pins_mecio1>; + pinctrl-1 = <&pwm1_sleep_pins_mecio1>; + status = "okay"; + }; +}; + +&timers8 { + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + hpdcm1_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm8_pins_mecio1>; + pinctrl-1 = <&pwm8_sleep_pins_mecio1>; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&{uart4_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ +}; + +&{uart4_pins_a/pins2} { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + vbus-supply = <&v5v>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&v3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&v3v3>; +}; + +&pinctrl { + adc12_pins_mecsbc: adc12-ain-mecsbc-0 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1_INP6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2_INP2 */ + <STM32_PINMUX('F', 14, ANALOG)>, /* ADC2_INP6 */ + <STM32_PINMUX('A', 0, ANALOG)>, /* ADC1_INP16 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */ + <STM32_PINMUX('A', 4, ANALOG)>, /* ADC1_INP18 */ + <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP19 */ + <STM32_PINMUX('A', 6, ANALOG)>, /* ADC1_INP3 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */ + <STM32_PINMUX('C', 3, ANALOG)>; /* ADC1_INP13 */ + }; + }; + + pinctrl_hog_d_mecsbc: hog-d-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, GPIO)>; /* STP_RESETn */ + bias-pull-up; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_pins_mecio1: pwm1-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('A', 8, AF1)>; /* TIM1_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_mecio1: pwm1-sleep-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* TIM1_CH1 */ + <STM32_PINMUX('A', 8, ANALOG)>; /* TIM1_CH2 */ + }; + }; + + pwm8_pins_mecio1: pwm8-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */ + <STM32_PINMUX('I', 6, AF3)>; /* TIM8_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_mecio1: pwm8-sleep-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */ + <STM32_PINMUX('I', 6, ANALOG)>; /* TIM8_CH2 */ + }; + }; + + ethernet0_rgmii_pins_x: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('B', 8, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index cfaf8adde319..be0c355d3105 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -16,12 +16,20 @@ / { aliases { + can0 = &m_can1; + can1 = &m_can2; ethernet0 = ðernet0; ethernet1 = &port_uplink; ethernet2 = &port_dut; + i2c0 = &i2c1; + i2c1 = &i2c4; + i2c2 = &i2c5; mmc1 = &sdmmc2; serial0 = &uart4; serial1 = &usart3; + spi0 = &spi2; + spi1 = &spi4; + spi2 = &spi5; }; chosen { @@ -142,76 +150,6 @@ baseboard_eeprom: &sip_eeprom { }; -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc1_ain_pins_a>; - vdd-supply = <&vdd>; - vdda-supply = <&vdda>; - vref-supply = <&vrefbuf>; - status = "okay"; - - adc1: adc@0 { - st,adc-channels = <0 1 2 5 9 10 13 15>; - st,min-sample-time-nsecs = <5000>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - channel@0 { - reg = <0>; - label = "HOST_2_CURR_FB"; - }; - - channel@1 { - reg = <1>; - label = "HOST_3_CURR_FB"; - }; - - channel@2 { - reg = <2>; - label = "OUT_0_FB"; - }; - - channel@5 { - reg = <5>; - label = "IOBUS_CURR_FB"; - }; - - channel@9 { - reg = <9>; - label = "IOBUS_VOLT_FB"; - }; - - channel@10 { - reg = <10>; - label = "OUT_1_FB"; - }; - - channel@13 { - reg = <13>; - label = "HOST_CURR_FB"; - }; - - channel@15 { - reg = <15>; - label = "HOST_1_CURR_FB"; - }; - }; - - adc2: adc@100 { - st,adc-channels = <12>; - st,min-sample-time-nsecs = <500000>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - channel@12 { - reg = <12>; - label = "TEMP_INTERNAL"; - }; - }; -}; - &crc1 { status = "okay"; }; @@ -265,13 +203,6 @@ baseboard_eeprom: &sip_eeprom { "ETH_LAB_LEDRN"; /* 15 */ }; -&gpioe { - gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */ - "", "", "USER_BTN2", "TP48", "UART_TX_EN", /* 5 */ - "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */ - "TP27"; /* 15 */ -}; - &gpiof { gpio-line-names = "TP36", "TP37", "", "", "OLED_CS", /* 0 */ "", "", "", "", "", /* 5 */ @@ -279,13 +210,6 @@ baseboard_eeprom: &sip_eeprom { ""; /* 15 */ }; -&gpiog { - gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */ - "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */ - "TP49", "", "", "", "", /* 10 */ - ""; /* 15 */ -}; - &gpioh { gpio-line-names = "", "", "OUT_1", "OUT_0", "OLED_RESET", /* 0 */ "", "", "", "", "", /* 5 */ @@ -379,15 +303,6 @@ baseboard_eeprom: &sip_eeprom { }; }; -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rtc { - status = "okay"; -}; - &sdmmc2 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; @@ -581,6 +496,10 @@ baseboard_eeprom: &sip_eeprom { vusb_d-supply = <&vdd_usb>; vusb_a-supply = <®18>; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 16 16 16 16 16>; + dr_mode = "peripheral"; status = "okay"; @@ -590,14 +509,6 @@ baseboard_eeprom: &sip_eeprom { status = "okay"; }; -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; - &vrefbuf { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; diff --git a/arch/arm/boot/dts/st/stm32mp15xc.dtsi b/arch/arm/boot/dts/st/stm32mp15xc.dtsi index b06a55a2fa18..97465717f932 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc.dtsi @@ -4,15 +4,14 @@ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. */ -/ { - soc { - cryp1: cryp@54001000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54001000 0x400>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; +&etzpc { + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + access-controllers = <&etzpc 9>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi index bb4f8a0b937f..abe2dfe70636 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi @@ -6,18 +6,6 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> -/ { - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - &adc { status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi index 466d9701add0..0fb4e55843b9 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi @@ -7,16 +7,6 @@ #include <dt-bindings/pwm/pwm.h> / { - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - clk_ext_audio_codec: clock-codec { compatible = "fixed-clock"; #clock-cells = <0>; @@ -192,15 +182,11 @@ sgtl5000_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master = <&sgtl5000_tx_endpoint>; - bitclock-master = <&sgtl5000_tx_endpoint>; }; sgtl5000_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master = <&sgtl5000_rx_endpoint>; - bitclock-master = <&sgtl5000_rx_endpoint>; }; }; @@ -245,10 +231,12 @@ sai2a_port: port { sai2a_endpoint: endpoint { remote-endpoint = <&sgtl5000_tx_endpoint>; + bitclock-master; dai-format = "i2s"; - mclk-fs = <512>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <16>; + frame-master; + mclk-fs = <256>; }; }; }; @@ -263,10 +251,12 @@ sai2b_port: port { sai2b_endpoint: endpoint { remote-endpoint = <&sgtl5000_rx_endpoint>; + bitclock-master; dai-format = "i2s"; - mclk-fs = <512>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <16>; + frame-master; + mclk-fs = <256>; }; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi index b5bc53accd6b..01c693cc0344 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi @@ -7,16 +7,6 @@ #include <dt-bindings/pwm/pwm.h> / { - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - led { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi index 74a11ccc5333..142d4a8731f8 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi @@ -14,6 +14,13 @@ ethernet1 = &ksz8851; rtc0 = &hwrtc; rtc1 = &rtc; + serial0 = &uart4; + serial1 = &uart8; + serial2 = &usart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory@c0000000 { diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi index f7634c51efb2..a5511b1f0ce3 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi @@ -570,6 +570,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm1_pins_a>; pinctrl-1 = <&pwm1_sleep_pins_a>; @@ -585,6 +588,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm3_pins_a>; pinctrl-1 = <&pwm3_sleep_pins_a>; @@ -600,6 +606,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; @@ -615,6 +624,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm5_pins_a>; pinctrl-1 = <&pwm5_sleep_pins_a>; @@ -630,6 +642,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; timer@5 { status = "okay"; }; @@ -639,6 +654,9 @@ /delete-property/dmas; /delete-property/dma-names; status = "disabled"; + counter { + status = "okay"; + }; pwm { pinctrl-0 = <&pwm12_pins_a>; pinctrl-1 = <&pwm12_sleep_pins_a>; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi index aeb71c41a734..2022a1fa31ca 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi @@ -214,3 +214,16 @@ &rng1 { status = "okay"; }; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/arch/arm/boot/dts/ti/davinci/da850-evm.dts b/arch/arm/boot/dts/ti/davinci/da850-evm.dts index 6c5936278e75..1f5cd35f8b74 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-evm.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-evm.dts @@ -65,7 +65,7 @@ display-timings { native-mode = <&timing0>; - timing0: 480x272 { + timing0: timing-480x272 { clock-frequency = <9000000>; hactive = <480>; vactive = <272>; diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts index 4df10379ff22..173401c58d53 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts @@ -412,14 +412,14 @@ status = "okay"; /* Don't pull down battery voltage adc io channel */ - batt_volt_en { + batt-volt-en-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; /* Don't impede Bluetooth clock signal */ - bt_clock_en { + bt-clock-en-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input; @@ -433,19 +433,19 @@ * anything, but they are present in the source code from LEGO. */ - bt_pic_en { + bt-pic-en-hog { gpio-hog; gpios = <51 GPIO_ACTIVE_HIGH>; output-low; }; - bt_pic_rst { + bt-pic-rst-hog { gpio-hog; gpios = <78 GPIO_ACTIVE_HIGH>; output-high; }; - bt_pic_cts { + bt-pic-cts-hog { gpio-hog; gpios = <87 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi index 790b29ab0fa2..dafe485dfe19 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi @@ -256,11 +256,6 @@ pmmc: system-controller@2921c00 { compatible = "ti,k2g-sci"; - /* - * In case of rare platforms that does not use k2g as - * system master, use /delete-property/ - */ - ti,system-reboot-controller; mbox-names = "rx", "tx"; mboxes = <&msgmgr 5 2>, <&msgmgr 0 0>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi index a4beb718559c..ae2e8dffbe04 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi @@ -199,7 +199,6 @@ ti,nand-ecc-opt = "bch8"; ti,nand-xfer-type = "prefetch-dma"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -251,7 +250,7 @@ pinctrl-0 = <&tps65910_pins>; }; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; pagesize = <8>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index 2d0216840ff5..c400b7b70d0d 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -216,15 +216,19 @@ reg = <0x24>; }; - baseboard_eeprom: baseboard_eeprom@50 { + baseboard_eeprom: eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; vcc-supply = <&ldo4_reg>; - #address-cells = <1>; - #size-cells = <1>; - baseboard_data: baseboard_data@0 { - reg = <0 0x100>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; }; }; }; @@ -236,43 +240,63 @@ status = "okay"; clock-frequency = <100000>; - cape_eeprom0: cape_eeprom0@54 { + cape_eeprom0: eeprom@54 { compatible = "atmel,24c256"; reg = <0x54>; - #address-cells = <1>; - #size-cells = <1>; - cape0_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape0_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; - cape_eeprom1: cape_eeprom1@55 { + cape_eeprom1: eeprom@55 { compatible = "atmel,24c256"; reg = <0x55>; - #address-cells = <1>; - #size-cells = <1>; - cape1_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape1_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; - cape_eeprom2: cape_eeprom2@56 { + cape_eeprom2: eeprom@56 { compatible = "atmel,24c256"; reg = <0x56>; - #address-cells = <1>; - #size-cells = <1>; - cape2_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape2_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; - cape_eeprom3: cape_eeprom3@57 { + cape_eeprom3: eeprom@57 { compatible = "atmel,24c256"; reg = <0x57>; - #address-cells = <1>; - #size-cells = <1>; - cape3_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape3_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; }; @@ -385,7 +409,7 @@ /* Support GPIO reset on revision C3 boards */ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; reset-assert-us = <300>; - reset-deassert-us = <6500>; + reset-deassert-us = <50000>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts index 801399702547..f579df4c2c54 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts @@ -313,14 +313,18 @@ }; &i2c0 { - baseboard_eeprom: baseboard_eeprom@50 { + baseboard_eeprom: eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; - #address-cells = <1>; - #size-cells = <1>; - baseboard_data: baseboard_data@0 { - reg = <0 0x100>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; }; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts index 56e5d954a490..4b070e634b28 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts @@ -74,7 +74,7 @@ pinctrl-1 = <&lcd_pins_sleep>; display-timings { - 320x240 { + timing-320x240 { hactive = <320>; vactive = <240>; hback-porch = <68>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts index 26b5510cb3d1..56929059f5af 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts @@ -231,7 +231,7 @@ }; temperature-sensor@48 { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts index f38f5bff2b96..ded19e24e666 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts @@ -67,7 +67,7 @@ }; display-timings { - 240x320p16 { + timing-240x320p16 { clock-frequency = <6500000>; hactive = <240>; vactive = <320>; @@ -289,7 +289,7 @@ reg = <0x2d>; }; - m2_eeprom: m2_eeprom@50 { + m2_eeprom: eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; status = "okay"; @@ -303,12 +303,12 @@ status = "okay"; clock-frequency = <100000>; - board_24aa025e48: board_24aa025e48@50 { + board_24aa025e48: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; - backplane_24aa025e48: backplane_24aa025e48@53 { + backplane_24aa025e48: eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts index d5a4a21889d1..e7d561a527fd 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts @@ -202,7 +202,7 @@ }; display-timings { native-mode = <&timing0>; - timing0: 480x272 { + timing0: timing-480x272 { clock-frequency = <18400000>; hactive = <480>; vactive = <272>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi index 625db3bcd365..287d209a0ea9 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi @@ -5,6 +5,9 @@ * */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/am33xx.h> + / { model = "Phytec AM335x phyBOARD-REGOR"; compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"; @@ -188,7 +191,7 @@ pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; @@ -198,4 +201,9 @@ pinctrl-0 = <&uart1_rs485_pins>; status = "okay"; linux,rs485-enabled-at-boot-time; + /* + * un-intuitively, yet with the default (active-high), + * am335x RTS is high on idle and gets low on active ! + */ + rs485-rts-active-low; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-shc.dts b/arch/arm/boot/dts/ti/omap/am335x-shc.dts index 9297cb1efcd4..597482822608 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-shc.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-shc.dts @@ -169,7 +169,7 @@ reg = <0x24>; }; - at24@50 { + eeprom@50 { compatible = "atmel,24c32"; pagesize = <32>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi b/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi index cb27ff464dbe..d0c290d7d062 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi @@ -14,7 +14,7 @@ simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound_iface_main>; simple-audio-card,frame-master = <&sound_iface_main>; - simple-audio-card,mclk-fs = <32>; + simple-audio-card,mclk-fs = <512>; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out", @@ -27,13 +27,12 @@ "LINE1L", "Line In", "LINE1R", "Line In"; - simple-audio-card,cpu { + sound_iface_main: simple-audio-card,cpu { sound-dai = <&mcasp0>; }; - sound_iface_main: simple-audio-card,codec { + simple-audio-card,codec { sound-dai = <&tlv320aic3007>; - clocks = <&mcasp0_fck>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi index 989d5a6edeed..0614ffdc1578 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi @@ -80,7 +80,7 @@ * because the can not be enabled simultaneously on a * single SoC. */ - opp-50-300000000{ + opp-50-300000000 { /* OPP50 */ opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; @@ -88,7 +88,7 @@ opp-suspend; }; - opp-100-275000000{ + opp-100-275000000 { /* OPP100-1 */ opp-hz = /bits/ 64 <275000000>; opp-microvolt = <1100000 1078000 1122000>; @@ -96,7 +96,7 @@ opp-suspend; }; - opp-100-300000000{ + opp-100-300000000 { /* OPP100-2 */ opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1100000 1078000 1122000>; @@ -104,7 +104,7 @@ opp-suspend; }; - opp-100-500000000{ + opp-100-500000000 { /* OPP100-3 */ opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1100000 1078000 1122000>; diff --git a/arch/arm/boot/dts/ti/omap/am3517-som.dtsi b/arch/arm/boot/dts/ti/omap/am3517-som.dtsi index bd0a6c95afa1..e36cd98f57fa 100644 --- a/arch/arm/boot/dts/ti/omap/am3517-som.dtsi +++ b/arch/arm/boot/dts/ti/omap/am3517-som.dtsi @@ -44,7 +44,6 @@ nand@0,0 { compatible = "ti,omap2-nand"; - linux,mtd-name = "micron,mt29f4g16abchch"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/ti/omap/am3874-iceboard.dts b/arch/arm/boot/dts/ti/omap/am3874-iceboard.dts index ac082e83a9a2..bbb9200a1f26 100644 --- a/arch/arm/boot/dts/ti/omap/am3874-iceboard.dts +++ b/arch/arm/boot/dts/ti/omap/am3874-iceboard.dts @@ -249,8 +249,8 @@ tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; }; /* EEPROM bank and serial number are treated as separate devices */ - at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; }; - at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; }; + eeprom@57 { compatible = "atmel,24c01"; reg = <0x57>; }; + eeprom@5f { compatible = "atmel,24cs01"; reg = <0x5f>; }; }; }; }; @@ -270,8 +270,8 @@ multi-master; /* All backplanes should have this -- it's how we know they're there. */ - at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; }; - at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; }; + eeprom@54 { compatible="atmel,24c08"; reg=<0x54>; }; + eeprom@5c { compatible="atmel,24cs08"; reg=<0x5c>; }; /* 16 slot backplane */ tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; }; diff --git a/arch/arm/boot/dts/ti/omap/am4372.dtsi b/arch/arm/boot/dts/ti/omap/am4372.dtsi index 5fd1b380ece6..0a1df30f2818 100644 --- a/arch/arm/boot/dts/ti/omap/am4372.dtsi +++ b/arch/arm/boot/dts/ti/omap/am4372.dtsi @@ -92,7 +92,7 @@ opp-supported-hw = <0xFF 0x08>; }; - opp-800000000{ + opp-800000000 { /* OPP Turbo */ opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; diff --git a/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts b/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts index 172516a7667e..e06fc30091c8 100644 --- a/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts @@ -254,7 +254,7 @@ }; }; - eeprom_module: at24@50 { + eeprom_module: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; diff --git a/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts index 00682ce7e14c..826f687c368a 100644 --- a/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts @@ -333,7 +333,7 @@ pinctrl-1 = <&i2c0_pins_sleep>; clock-frequency = <400000>; - at24@50 { + eeprom@50 { compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi index 824b9415ebbe..fd4634f8c629 100644 --- a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi @@ -180,8 +180,7 @@ <0x9058 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; + SYSC_OMAP2_SOFTRESET)>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, @@ -698,8 +697,7 @@ <0x22058 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; + SYSC_OMAP2_SOFTRESET)>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, @@ -726,8 +724,7 @@ <0x24058 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; + SYSC_OMAP2_SOFTRESET)>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, @@ -1385,8 +1382,7 @@ <0xa6058 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; + SYSC_OMAP2_SOFTRESET)>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, @@ -1413,8 +1409,7 @@ <0xa8058 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; + SYSC_OMAP2_SOFTRESET)>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, @@ -1441,8 +1436,7 @@ <0xaa058 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; + SYSC_OMAP2_SOFTRESET)>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, diff --git a/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts b/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts index 5ec57dcb0659..73badf80b4ff 100644 --- a/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts +++ b/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts @@ -112,7 +112,7 @@ #gpio-cells = <2>; }; - eeprom_base: at24@50 { + eeprom_base: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; diff --git a/arch/arm/boot/dts/ti/omap/am437x-sk-evm.dts b/arch/arm/boot/dts/ti/omap/am437x-sk-evm.dts index 9c97006ffd5b..4700f9879d2d 100644 --- a/arch/arm/boot/dts/ti/omap/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/ti/omap/am437x-sk-evm.dts @@ -570,7 +570,7 @@ }; }; - at24@50 { + eeprom@50 { compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/am43x-epos-evm.dts b/arch/arm/boot/dts/ti/omap/am43x-epos-evm.dts index 9193a4cfba78..4ac94be8d000 100644 --- a/arch/arm/boot/dts/ti/omap/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/ti/omap/am43x-epos-evm.dts @@ -651,7 +651,7 @@ }; }; - at24@50 { + eeprom@50 { compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index eb1ec85aba28..e6a18954e449 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -196,7 +196,6 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; - ti,enable-id-detection; id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts index d6e3152b02f7..3dd898955e76 100644 --- a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts @@ -429,7 +429,7 @@ reg = <0x56>; }; - eeprom_module: atmel@50 { + eeprom_module: eeprom@50 { compatible = "atmel,24c08"; reg = <0x50>; pagesize = <16>; diff --git a/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts index 64675f4edb60..41bef36c5554 100644 --- a/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts @@ -105,7 +105,7 @@ pinctrl-0 = <&i2c5_pins_default>; clock-frequency = <400000>; - eeprom_base: atmel@54 { + eeprom_base: eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; pagesize = <16>; diff --git a/arch/arm/boot/dts/ti/omap/dm8148-evm.dts b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts index ae8d9fa09d16..57a9eef09f6f 100644 --- a/arch/arm/boot/dts/ti/omap/dm8148-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts @@ -51,7 +51,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,mt29f2g16aadwp"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/ti/omap/dm8168-evm.dts b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts index 1d80288f6ba5..6130b9a5f660 100644 --- a/arch/arm/boot/dts/ti/omap/dm8168-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts @@ -119,7 +119,6 @@ nand@0,0 { compatible = "ti,omap2-nand"; - linux,mtd-name = "micron,mt29f2g16aadwp"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ diff --git a/arch/arm/boot/dts/ti/omap/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/ti/omap/dra62x-j5eco-evm.dts index 2f6ac267fc15..df05a0682322 100644 --- a/arch/arm/boot/dts/ti/omap/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra62x-j5eco-evm.dts @@ -51,7 +51,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,mt29f2g16aadwp"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi index 6e67d99832ac..ba7fdaae9c6e 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi @@ -12,6 +12,7 @@ ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */ <0x00100000 0x4a100000 0x100000>, /* segment 1 */ <0x00200000 0x4a200000 0x100000>; /* segment 2 */ + dma-ranges; segment@0 { /* 0x4a000000 */ compatible = "simple-pm-bus"; @@ -557,6 +558,7 @@ <0x0007e000 0x0017e000 0x001000>, /* ap 124 */ <0x00059000 0x00159000 0x001000>, /* ap 125 */ <0x0005a000 0x0015a000 0x001000>; /* ap 126 */ + dma-ranges; target-module@2000 { /* 0x4a102000, ap 27 3c.0 */ compatible = "ti,sysc"; diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi index 164fa88c459e..b709703f6c0d 100644 --- a/arch/arm/boot/dts/ti/omap/dra7.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi @@ -9,7 +9,6 @@ #include <dt-bindings/clock/dra7.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/dra.h> -#include <dt-bindings/clock/dra7.h> #define MAX_SOURCES 400 diff --git a/arch/arm/boot/dts/ti/omap/dra76x.dtsi b/arch/arm/boot/dts/ti/omap/dra76x.dtsi index 1045eb24aa0d..50a02c393ea2 100644 --- a/arch/arm/boot/dts/ti/omap/dra76x.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra76x.dtsi @@ -84,35 +84,44 @@ }; &scm_conf_clocks { - dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_gmac_x2_ck>; - ti,max-div = <63>; - reg = <0x03fc>; - ti,bit-shift = <20>; - ti,latch-bit = <26>; - assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>; - assigned-clock-rates = <80000000>; - }; - - dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>; + /* CTRL_CORE_SMA_SW_0 */ + clock@3fc { + compatible = "ti,clksel"; reg = <0x3fc>; - ti,bit-shift = <29>; - ti,latch-bit = <26>; - assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; - assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>; - }; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_gmac_h14x2_ctrl_ck: clock@20 { + reg = <20>; + clock-output-names = "dpll_gmac_h14x2_ctrl_ck"; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <63>; + ti,latch-bit = <26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>; + assigned-clock-rates = <80000000>; + #clock-cells = <0>; + }; - mcan_clk: mcan_clk@3fc { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; - ti,bit-shift = <27>; - reg = <0x3fc>; + mcan_clk: clock@27 { + reg = <27>; + clock-output-names = "mcan_clk"; + compatible = "ti,gate-clock"; + clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + #clock-cells = <0>; + }; + + dpll_gmac_h14x2_ctrl_mux_ck: clock@29 { + reg = <29>; + clock-output-names = "dpll_gmac_h14x2_ctrl_mux_ck"; + compatible = "ti,mux-clock"; + clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>; + ti,latch-bit = <26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>; + #clock-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi index 06466d36caa9..0de16ee262cf 100644 --- a/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi @@ -285,13 +285,21 @@ ti,invert-autoidle-bit; }; - dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_core_byp_mux"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; - ti,bit-shift = <23>; - reg = <0x012c>; + /* CM_CLKSEL_DPLL_CORE */ + clock@12c { + compatible = "ti,clksel"; + reg = <0x12c>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_core_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + #clock-cells = <0>; + }; }; dpll_core_ck: clock@120 { @@ -368,13 +376,21 @@ clock-div = <1>; }; - dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_dsp_byp_mux"; - clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; - ti,bit-shift = <23>; - reg = <0x0240>; + /* CM_CLKSEL_DPLL_DSP */ + clock@240 { + compatible = "ti,clksel"; + reg = <0x240>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_dsp_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_dsp_byp_mux"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + #clock-cells = <0>; + }; }; dpll_dsp_ck: clock@234 { @@ -410,13 +426,21 @@ clock-div = <1>; }; - dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_iva_byp_mux"; - clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; - ti,bit-shift = <23>; - reg = <0x01ac>; + /* CM_CLKSEL_DPLL_IVA */ + clock@1ac { + compatible = "ti,clksel"; + reg = <0x1ac>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_iva_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + #clock-cells = <0>; + }; }; dpll_iva_ck: clock@1a0 { @@ -452,13 +476,21 @@ clock-div = <1>; }; - dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_gpu_byp_mux"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; - ti,bit-shift = <23>; - reg = <0x02e4>; + /* CM_CLKSEL_DPLL_GPU */ + clock@2e4 { + compatible = "ti,clksel"; + reg = <0x2e4>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_gpu_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_gpu_byp_mux"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + #clock-cells = <0>; + }; }; dpll_gpu_ck: clock@2d8 { @@ -506,13 +538,21 @@ clock-div = <1>; }; - dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_ddr_byp_mux"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; - ti,bit-shift = <23>; - reg = <0x021c>; + /* CM_CLKSEL_DPLL_DDR */ + clock@21c { + compatible = "ti,clksel"; + reg = <0x21c>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_ddr_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_ddr_byp_mux"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + #clock-cells = <0>; + }; }; dpll_ddr_ck: clock@210 { @@ -535,13 +575,21 @@ ti,invert-autoidle-bit; }; - dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_gmac_byp_mux"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; - ti,bit-shift = <23>; - reg = <0x02b4>; + /* CM_CLKSEL_DPLL_GMAC */ + clock@2b4 { + compatible = "ti,clksel"; + reg = <0x2b4>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_gmac_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_gmac_byp_mux"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + #clock-cells = <0>; + }; }; dpll_gmac_ck: clock@2a8 { @@ -618,13 +666,21 @@ clock-div = <1>; }; - dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_eve_byp_mux"; - clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; - ti,bit-shift = <23>; - reg = <0x0290>; + /* CM_CLKSEL_DPLL_EVE */ + clock@290 { + compatible = "ti,clksel"; + reg = <0x290>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_eve_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_eve_byp_mux"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + #clock-cells = <0>; + }; }; dpll_eve_ck: clock@284 { @@ -838,15 +894,23 @@ clock-div = <1>; }; - l3_iclk_div: clock-l3-iclk-div-4@100 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clock-output-names = "l3_iclk_div"; - ti,max-div = <2>; - ti,bit-shift = <4>; - reg = <0x0100>; - clocks = <&dpll_core_h12x2_ck>; - ti,index-power-of-two; + /* CM_CLKSEL_CORE */ + clock@100 { + compatible = "ti,clksel"; + reg = <0x100>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + l3_iclk_div: clock@4 { + reg = <4>; + compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; + ti,max-div = <2>; + clocks = <&dpll_core_h12x2_ck>; + ti,index-power-of-two; + #clock-cells = <0>; + }; }; l4_root_clk_div: clock-l4-root-clk-div { @@ -911,12 +975,21 @@ ti,index-starts-at-one; }; - abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "abe_dpll_sys_clk_mux"; - clocks = <&sys_clkin1>, <&sys_clkin2>; - reg = <0x0118>; + /* CM_CLKSEL_ABE_PLL_SYS */ + clock@118 { + compatible = "ti,clksel"; + reg = <0x118>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + abe_dpll_sys_clk_mux: clock@0 { + reg = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_sys_clk_mux"; + clocks = <&sys_clkin1>, <&sys_clkin2>; + #clock-cells = <0>; + }; }; abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 { @@ -1018,14 +1091,23 @@ ti,index-power-of-two; }; - dsp_gclk_div: clock-dsp-gclk-div@18c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clock-output-names = "dsp_gclk_div"; - clocks = <&dpll_dsp_m2_ck>; - ti,max-div = <64>; - reg = <0x018c>; - ti,index-power-of-two; + /* CM_CLKSEL_DPLL_USB */ + clock@18c { + compatible = "ti,clksel"; + reg = <0x18c>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dsp_gclk_div: clock@0 { + reg = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dsp_gclk_div"; + clocks = <&dpll_dsp_m2_ck>; + ti,max-div = <64>; + ti,index-power-of-two; + #clock-cells = <0>; + }; }; gpu_dclk: clock-gpu-dclk@1a0 { @@ -1294,7 +1376,6 @@ clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; - ti,dividers = <2>, <1>; ti,bit-shift = <8>; ti,max-div = <2>; }; @@ -1326,13 +1407,21 @@ clock-div = <1>; }; - dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_per_byp_mux"; - clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; - ti,bit-shift = <23>; - reg = <0x014c>; + /* CM_CLKSEL_DPLL_PER */ + clock@14c { + compatible = "ti,clksel"; + reg = <0x14c>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_per_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + #clock-cells = <0>; + }; }; dpll_per_ck: clock@140 { @@ -1364,13 +1453,21 @@ clock-div = <1>; }; - dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clock-output-names = "dpll_usb_byp_mux"; - clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; - ti,bit-shift = <23>; - reg = <0x018c>; + /* CM_CLKSEL_DPLL_USB */ + clock@18c { + compatible = "ti,clksel"; + reg = <0x18c>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + dpll_usb_byp_mux: clock@23 { + reg = <23>; + compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + #clock-cells = <0>; + }; }; dpll_usb_ck: clock@180 { diff --git a/arch/arm/boot/dts/ti/omap/logicpd-som-lv.dtsi b/arch/arm/boot/dts/ti/omap/logicpd-som-lv.dtsi index c0e6b73fa472..d51a436d9774 100644 --- a/arch/arm/boot/dts/ti/omap/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/ti/omap/logicpd-som-lv.dtsi @@ -51,7 +51,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ diff --git a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-som.dtsi index 227699890890..0b65ac5b4230 100644 --- a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-som.dtsi @@ -49,7 +49,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ @@ -103,7 +102,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; - at24@50 { + eeprom@50 { compatible = "atmel,24c64"; readonly; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x.dtsi index 950a29f9b4a0..cd13826d033d 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x.dtsi @@ -190,7 +190,7 @@ clock-frequency = <400000>; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/omap3-evm-37xx.dts b/arch/arm/boot/dts/ti/omap/omap3-evm-37xx.dts index e0346bf842fc..9c60ac853a40 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-evm-37xx.dts @@ -60,7 +60,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "hynix,h8kds0un0mer-4em"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi index e27837093e43..70e33cdd519a 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi @@ -205,7 +205,7 @@ /* T2_GPIO_2 low to route GPIO_61 to on-board devices */ &twl_gpio { - en_on_board_gpio_61 { + en-on-board-gpio-61-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm/boot/dts/ti/omap/omap3-evm.dts b/arch/arm/boot/dts/ti/omap/omap3-evm.dts index a2a1613c45c3..28caa5d93b87 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-evm.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-evm.dts @@ -60,7 +60,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,mt29f2g16abdhc"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi index 3661340009e7..1b18ed8c1f7a 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi @@ -446,6 +446,7 @@ pinctrl-names = "default"; pinctrl-0 = < &hsusb2_2_pins + &mcspi3hog_pins >; hsusb2_2_pins: hsusb2-2-pins { @@ -459,6 +460,15 @@ >; }; + mcspi3hog_pins: mcspi3hog-pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d0 */ + OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d1 */ + OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d2 */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d3 */ + >; + }; + spi_gpio_pins: spi-gpio-pinmux-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ @@ -591,8 +601,10 @@ interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ ti,x-plate-ohms = <600>; - touchscreen-size-x = <480>; - touchscreen-size-y = <640>; + touchscreen-size-x = <0xf00>; + touchscreen-size-y = <0xf00>; + touchscreen-min-x = <0x100>; + touchscreen-min-y = <0x100>; touchscreen-max-pressure = <1000>; touchscreen-fuzz-x = <3>; touchscreen-fuzz-y = <8>; @@ -601,7 +613,7 @@ }; /* RFID EEPROM */ - m24lr64@50 { + eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts b/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts index 8bd6b4b1f30b..d3a81f0b880f 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts @@ -114,6 +114,16 @@ }; }; +&uart1 { + bluetooth { + compatible = "ti,wl1837-st"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO_137 */ + }; +}; + + &i2c2 { /delete-node/ bmp085@77; /delete-node/ bma180@41; diff --git a/arch/arm/boot/dts/ti/omap/omap3-igep.dtsi b/arch/arm/boot/dts/ti/omap/omap3-igep.dtsi index e068ecf86b8f..7346cad84eda 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-igep.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-igep.dtsi @@ -111,7 +111,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,mt29c4g96maz"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/ti/omap/omap3-ldp.dts b/arch/arm/boot/dts/ti/omap/omap3-ldp.dts index bb6fab9fa47d..cf325f56b464 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-ldp.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-ldp.dts @@ -103,7 +103,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,nand"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/ti/omap/omap3-n900.dts b/arch/arm/boot/dts/ti/omap/omap3-n900.dts index d33485341251..4bde3342bb95 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-n900.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-n900.dts @@ -754,7 +754,7 @@ ti,current-limit = <100>; ti,weak-battery-voltage = <3400>; ti,battery-regulation-voltage = <4200>; - ti,charge-current = <650>; + ti,charge-current = <950>; ti,termination-current = <100>; ti,resistor-sense = <68>; @@ -781,7 +781,7 @@ mount-matrix = "-1", "0", "0", "0", "1", "0", - "0", "0", "1"; + "0", "0", "-1"; }; cam1: camera@3e { diff --git a/arch/arm/boot/dts/ti/omap/omap3-overo-base.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-base.dtsi index cc57626ea607..2793821b2c33 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-overo-base.dtsi @@ -222,7 +222,6 @@ nand@0,0 { compatible = "ti,omap2-nand"; - linux,mtd-name = "micron,mt29c4g96maz"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ diff --git a/arch/arm/boot/dts/ti/omap/omap3-sb-t35.dtsi b/arch/arm/boot/dts/ti/omap/omap3-sb-t35.dtsi index 6730c749d5ea..da80d7b7d4b1 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-sb-t35.dtsi @@ -89,7 +89,7 @@ clock-frequency = <400000>; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/omap3430-sdp.dts b/arch/arm/boot/dts/ti/omap/omap3430-sdp.dts index 258ecd9e4519..cc5e9035ef73 100644 --- a/arch/arm/boot/dts/ti/omap/omap3430-sdp.dts +++ b/arch/arm/boot/dts/ti/omap/omap3430-sdp.dts @@ -105,7 +105,6 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name = "micron,mt29f1g08abb"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "sw"; @@ -148,7 +147,6 @@ }; onenand@2,0 { - linux,mtd-name = "samsung,kfm2g16q2m-deb8"; #address-cells = <1>; #size-cells = <1>; compatible = "ti,omap2-onenand"; diff --git a/arch/arm/boot/dts/ti/omap/omap36xx.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx.dtsi index c3d79ecd56e3..c217094b50ab 100644 --- a/arch/arm/boot/dts/ti/omap/omap36xx.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap36xx.dtsi @@ -72,6 +72,7 @@ <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; + turbo-mode; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts index 339e52ba3614..c90f43cc2fae 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts @@ -17,16 +17,34 @@ reg = <0x80000000 0x40000000>; /* 1024M */ }; + battery: battery { + compatible = "simple-battery"; + device-chemistry = "lithium-ion"; + charge-full-design-microamp-hours = <2720000>; + voltage-max-design-microvolt = <4200000>; + voltage-min-design-microvolt = <3300000>; + + constant-charge-voltage-max-microvolt = <4200000>; + /* + * vendor kernel says max charge 1400000, input limit 900000 + * and charges only with dcp chargers. So it is unclear what + * is really allowed. Play safe for now and restrict things + * here. Maybe 900000 is just the limit of the vendor charger? + */ + constant-charge-current-max-microamp = <900000>; + charge-term-current-microamp = <200000>; + }; + backlight-left { compatible = "pwm-backlight"; pwms = <&twl_pwm 1 7812500>; - power-supply = <&unknown_supply>; + power-supply = <&lb_v50>; }; backlight-right { compatible = "pwm-backlight"; pwms = <&twl_pwm 0 7812500>; - power-supply = <&unknown_supply>; + power-supply = <&lb_v50>; }; chosen { @@ -46,9 +64,53 @@ }; }; - unknown_supply: unknown-supply { + cb_v18: regulator-cb-v18 { + pinctrl-names = "default"; + pinctrl-0 = <&cb_v18_pins>; + compatible = "regulator-fixed"; + regulator-name = "cb_v18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cb_v33: regulator-cb-v33 { + pinctrl-names = "default"; + pinctrl-0 = <&cb_v33_pins>; + compatible = "regulator-fixed"; + regulator-name = "cb_v33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + regulator-cb-v50 { + pinctrl-names = "default"; + pinctrl-0 = <&cb_v50_pins>; + compatible = "regulator-fixed"; + regulator-name = "cb_v50"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lb_v50: regulator-lb-v50 { + /* required for many things at the head (probably indirectly) */ + pinctrl-names = "default"; + pinctrl-0 = <&lb_v50_pins>; compatible = "regulator-fixed"; - regulator-name = "unknown"; + regulator-name = "lb_v50"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + enable-active-high; }; wl12xx_pwrseq: wl12xx-pwrseq { @@ -71,6 +133,73 @@ }; }; +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_hog_pins &gpio1wk_hog_pins>; + + lb-reset-hog { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lb_reset"; + }; + + power-en-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "power_en"; + }; + + /* + * Name taken from vendor kernel but no evidence of actual usage found + * nor what it really controls. + */ + panel-power-en-hog { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "panel_power_en"; + }; + + /* + * These two are exported to sysfs in vendor kernel, usage unknown, + * backlight state seems unrelated to these. + */ + blc-r-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "blc_r"; + }; + + blc-l-hog { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "blc_l"; + }; + + high-hog { + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH /* maybe dsi to dpi chip reset? */ + 21 GPIO_ACTIVE_HIGH + 26 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "unknown-high"; + }; + + low-hog { + gpio-hog; + gpios = <18 GPIO_ACTIVE_HIGH + 19 GPIO_ACTIVE_HIGH + 20 GPIO_ACTIVE_HIGH + 22 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "unknown-low"; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -87,6 +216,14 @@ #interrupt-cells = <1>; system-power-controller; + charger { + compatible = "ti,twl6032-charger", "ti,twl6030-charger"; + interrupts = <2>, <5>; + io-channels = <&gpadc 10>; + io-channel-names = "vusb"; + monitored-battery = <&battery>; + }; + rtc { compatible = "ti,twl4030-rtc"; interrupts = <11>; @@ -166,7 +303,7 @@ #pwm-cells = <2>; }; - gpadc { + gpadc: gpadc { compatible = "ti,twl6032-gpadc"; interrupts = <3>; #io-channel-cells = <1>; @@ -188,6 +325,19 @@ clock-frequency = <200000>; + /* is sometimes not available, research needed */ + gpio_head: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * camera chip at 0x3c, available if <&gpio_head 1> high + * and <&gpio_head 5> low + */ + /* at head/glasses */ mpu9150h: imu@68 { compatible = "invensense,mpu9150"; @@ -259,6 +409,8 @@ pinctrl-0 = <&mpu9150_pins>; interrupt-parent = <&gpio2>; interrupt = <7 IRQ_TYPE_LEVEL_HIGH>; + vddio-supply = <&cb_v18>; + vdd-supply = <&cb_v33>; invensense,level-shifter; }; }; @@ -336,12 +488,46 @@ >; }; + cb_v18_pins: pinmux-cb-v18-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE3) /* gpio28 */ + >; + }; + + cb_v33_pins: pinmux-cb-v33-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE3) /* gpio190 */ + >; + }; + + cb_v50_pins: pinmux-cb-v50-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE3) /* gpio191 */ + >; + }; + gpio_keys_pins: pinmux-gpio-key-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x56, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio35 */ >; }; + gpio1_hog_pins: pinmux-gpio1-hog-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE3) /* gpio14 */ + OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE3) /* gpio16 */ + OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE3) /* gpio17 */ + + OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE3) /* gpio15 */ + OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE3) /* gpio18 */ + OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE3) /* gpio19 */ + OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE3) /* gpio20 */ + OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE3) /* gpio21 */ + OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE3) /* gpio22 */ + OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE3) /* gpio26 */ + >; + }; + i2c1_pins: pinmux-i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ @@ -387,6 +573,12 @@ >; }; + lb_v50_pins: pinmux-lb-v50-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE3) /* gpio27 */ + >; + }; + mcbsp2_pins: pinmux-mcbsp2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ @@ -457,6 +649,15 @@ }; }; +&omap4_pmx_wkup { + gpio1wk_hog_pins: pinmux-gpio1wk-hog-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x68, PIN_INPUT_PULLDOWN | MUX_MODE3) /* gpio9 */ + OMAP4_IOPAD(0x6a, PIN_INPUT | MUX_MODE3) /* gpio10 */ + >; + }; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins &bt_pins>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-kc1.dts b/arch/arm/boot/dts/ti/omap/omap4-kc1.dts index c6b79ba8bbc9..df874d5f5327 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-kc1.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-kc1.dts @@ -112,11 +112,7 @@ reg = <0x48>; /* IRQ# = 7 */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - - twl_power: power { - compatible = "ti,twl6030-power"; - ti,system-power-controller; - }; + system-power-controller; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi index 3fcef3080eae..150dd84c9e0f 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi @@ -1414,7 +1414,7 @@ uart3: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; @@ -1765,7 +1765,7 @@ uart1: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; @@ -1794,7 +1794,7 @@ uart2: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; @@ -1823,7 +1823,7 @@ uart4: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts index 8fd076e5d1b0..4b8bfd0188ad 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts @@ -7,6 +7,11 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" +/ { + model = "TI OMAP4 PandaBoard (A4)"; + compatible = "ti,omap4-panda-a4", "ti,omap4-panda", "ti,omap4430", "ti,omap4"; +}; + /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/ti/omap/omap5-cm-t54.dts b/arch/arm/boot/dts/ti/omap/omap5-cm-t54.dts index 6767382996ab..2fd8111de903 100644 --- a/arch/arm/boot/dts/ti/omap/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/ti/omap/omap5-cm-t54.dts @@ -413,7 +413,7 @@ clock-frequency = <400000>; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/omap5-sbc-t54.dts b/arch/arm/boot/dts/ti/omap/omap5-sbc-t54.dts index 02716fb796bd..7ae60dc198f3 100644 --- a/arch/arm/boot/dts/ti/omap/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/ti/omap/omap5-sbc-t54.dts @@ -44,7 +44,7 @@ clock-frequency = <400000>; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; diff --git a/arch/arm/boot/dts/ti/omap/twl4030.dtsi b/arch/arm/boot/dts/ti/omap/twl4030.dtsi index a5d9c5738317..07b9ca942e78 100644 --- a/arch/arm/boot/dts/ti/omap/twl4030.dtsi +++ b/arch/arm/boot/dts/ti/omap/twl4030.dtsi @@ -16,7 +16,7 @@ interrupts = <11>; }; - charger: bci { + charger: charger { compatible = "ti,twl4030-bci"; interrupts = <9>, <2>; bci3v1-supply = <&vusb3v1>; diff --git a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts index e9f55bd30bd4..38a2da5e2c5d 100644 --- a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts @@ -16,7 +16,7 @@ bits-per-pixel = <16>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/vt8500.dtsi b/arch/arm/boot/dts/vt8500/vt8500.dtsi index b7e09eff5bb2..f23cb5ee11ae 100644 --- a/arch/arm/boot/dts/vt8500/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500/vt8500.dtsi @@ -115,7 +115,7 @@ interrupts = <43>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <43>; diff --git a/arch/arm/boot/dts/vt8500/wm8505-ref.dts b/arch/arm/boot/dts/vt8500/wm8505-ref.dts index 2d77c087676e..8ce9e2ef0a81 100644 --- a/arch/arm/boot/dts/vt8500/wm8505-ref.dts +++ b/arch/arm/boot/dts/vt8500/wm8505-ref.dts @@ -16,7 +16,7 @@ bits-per-pixel = <32>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8505.dtsi b/arch/arm/boot/dts/vt8500/wm8505.dtsi index 168cd12b07bc..d9e1280372c5 100644 --- a/arch/arm/boot/dts/vt8500/wm8505.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8505.dtsi @@ -213,7 +213,7 @@ interrupts = <1>; }; - uhci@d8007300 { + usb@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; interrupts = <0>; diff --git a/arch/arm/boot/dts/vt8500/wm8650-mid.dts b/arch/arm/boot/dts/vt8500/wm8650-mid.dts index f6a42149a0a0..7977b6c1e8eb 100644 --- a/arch/arm/boot/dts/vt8500/wm8650-mid.dts +++ b/arch/arm/boot/dts/vt8500/wm8650-mid.dts @@ -17,7 +17,7 @@ display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8650.dtsi b/arch/arm/boot/dts/vt8500/wm8650.dtsi index bc057b6f7d16..35d12d77efc0 100644 --- a/arch/arm/boot/dts/vt8500/wm8650.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8650.dtsi @@ -185,7 +185,7 @@ interrupts = <43>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <43>; diff --git a/arch/arm/boot/dts/vt8500/wm8750.dtsi b/arch/arm/boot/dts/vt8500/wm8750.dtsi index 33aeb37491f4..b292f85d4e69 100644 --- a/arch/arm/boot/dts/vt8500/wm8750.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8750.dtsi @@ -257,13 +257,13 @@ interrupts = <26>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <26>; }; - uhci@d8008d00 { + usb@d8008d00 { compatible = "platform-uhci"; reg = <0xd8008d00 0x200>; interrupts = <26>; diff --git a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts index c7a6fe0ce48f..5d409323b10c 100644 --- a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts @@ -28,7 +28,7 @@ bits-per-pixel = <16>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8850.dtsi b/arch/arm/boot/dts/vt8500/wm8850.dtsi index 65c9271050e6..c61717ebb4f1 100644 --- a/arch/arm/boot/dts/vt8500/wm8850.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8850.dtsi @@ -244,13 +244,13 @@ interrupts = <26>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <26>; }; - uhci@d8008d00 { + usb@d8008d00 { compatible = "platform-uhci"; reg = <0xd8008d00 0x200>; interrupts = <26>; diff --git a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi index a7db3f3009f2..153b8d93cbee 100644 --- a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi +++ b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi @@ -8,6 +8,13 @@ #size-cells = <1>; compatible = "xlnx,zynq-7000"; + options { + u-boot { + compatible = "u-boot,config"; + bootscr-address = /bits/ 64 <0x3000000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -34,7 +41,7 @@ }; }; - fpga_full: fpga-full { + fpga_full: fpga-region { compatible = "fpga-region"; fpga-mgr = <&devcfg>; #address-cells = <1>; @@ -93,6 +100,7 @@ }; amba: axi { + bootph-all; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -190,6 +198,17 @@ reg = <0xf8006000 0x1000>; }; + ocm: sram@fffc0000 { + compatible = "mmio-sram"; + reg = <0xfffc0000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffc0000 0x10000>; + ocm-sram@0 { + reg = <0x0 0x10000>; + }; + }; + uart0: serial@e0000000 { compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; @@ -277,13 +296,18 @@ 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */ #address-cells = <2>; #size-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <0 18 4>; nfc0: nand-controller@0,0 { compatible = "arm,pl353-nand-r2p1"; reg = <0 0 0x1000000>; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + }; + nor0: flash@1,0 { + status = "disabled"; + compatible = "cfi-flash"; + reg = <1 0 0x2000000>; }; }; @@ -308,12 +332,14 @@ }; slcr: slcr@f8000000 { + bootph-all; #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { + bootph-all; #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; fclk-enable = <0>; @@ -398,6 +424,7 @@ }; scutimer: timer@f8f00600 { + bootph-all; interrupt-parent = <&intc>; interrupts = <1 13 0x301>; compatible = "arm,cortex-a9-twd-timer"; diff --git a/arch/arm/boot/dts/xilinx/zynq-cc108.dts b/arch/arm/boot/dts/xilinx/zynq-cc108.dts index 8b9ab9bba23b..f5525c048426 100644 --- a/arch/arm/boot/dts/xilinx/zynq-cc108.dts +++ b/arch/arm/boot/dts/xilinx/zynq-cc108.dts @@ -18,6 +18,7 @@ aliases { ethernet0 = &gem0; serial0 = &uart0; + spi0 = &qspi; }; chosen { @@ -48,7 +49,44 @@ ethernet_phy: ethernet-phy@1 { reg = <1>; - device_type = "ethernet-phy"; + }; +}; + +&qspi { + status = "okay"; + num-cs = <1>; + flash@0 { /* 16 MB */ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot-bs"; + reg = <0x0 0x400000>; /* 4MB */ + }; + partition@400000 { + label = "qspi-linux"; + reg = <0x400000 0x400000>; /* 4MB */ + }; + partition@800000 { + label = "qspi-rootfs"; + reg = <0x800000 0x400000>; /* 4MB */ + }; + partition@c00000 { + label = "qspi-devicetree"; + reg = <0xc00000 0x100000>; /* 1MB */ + }; + partition@d00000 { + label = "qspi-scratch"; + reg = <0xd00000 0x200000>; /* 2MB */ + }; + partition@f00000 { + label = "qspi-uboot-env"; + reg = <0xf00000 0x100000>; /* 1MB */ + }; }; }; @@ -59,6 +97,7 @@ }; &uart0 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts index 53fa6dbfd8fd..14f644156a6f 100644 --- a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts +++ b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts @@ -51,6 +51,8 @@ &nfc0 { status = "okay"; + #address-cells = <1>; + #size-cells = <0>; nand@0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-microzed.dts b/arch/arm/boot/dts/xilinx/zynq-microzed.dts index 6ed84fb15902..68b867e8369e 100644 --- a/arch/arm/boot/dts/xilinx/zynq-microzed.dts +++ b/arch/arm/boot/dts/xilinx/zynq-microzed.dts @@ -11,8 +11,9 @@ compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000"; aliases { - ethernet0 = &gem0; serial0 = &uart1; + spi0 = &qspi; + mmc0 = &sdhci0; }; memory@0 { @@ -35,6 +36,11 @@ ps-clk-frequency = <33333333>; }; +&qspi { + bootph-all; + status = "okay"; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; @@ -46,10 +52,12 @@ }; &sdhci0 { + bootph-all; status = "okay"; }; &uart1 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-parallella.dts b/arch/arm/boot/dts/xilinx/zynq-parallella.dts index 54592aeb92b9..366af4fcf8d9 100644 --- a/arch/arm/boot/dts/xilinx/zynq-parallella.dts +++ b/arch/arm/boot/dts/xilinx/zynq-parallella.dts @@ -46,7 +46,6 @@ compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; reg = <0>; - device_type = "ethernet-phy"; marvell,reg-init = <0x3 0x10 0xff00 0x1e>, <0x3 0x11 0xfff0 0xa>; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts index 6efdbca9d3ef..6955637c5b1a 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zc702.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts @@ -15,7 +15,10 @@ ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + spi0 = &qspi; mmc0 = &sdhci0; + nvmem0 = &eeprom; + rtc0 = &rtc; }; memory@0 { @@ -63,19 +66,6 @@ }; }; -&amba { - ocm: sram@fffc0000 { - compatible = "mmio-sram"; - reg = <0xfffc0000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xfffc0000 0x10000>; - ocm-sram@0 { - reg = <0x0 0x10000>; - }; - }; -}; - &can0 { status = "okay"; pinctrl-names = "default"; @@ -95,7 +85,6 @@ ethernet_phy: ethernet-phy@7 { reg = <7>; - device_type = "ethernet-phy"; }; }; @@ -152,7 +141,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - eeprom@54 { + eeprom: eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; }; @@ -174,7 +163,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - rtc@51 { + rtc: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -210,7 +199,7 @@ conf { groups = "can0_9_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -233,7 +222,7 @@ conf { groups = "ethernet0_0_grp"; slew-rate = <0>; - io-standard = <4>; + power-source = <4>; }; conf-rx { @@ -256,7 +245,7 @@ conf-mdio { groups = "mdio0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; }; @@ -274,7 +263,7 @@ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", "gpio0_13_grp", "gpio0_14_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-pull-up { @@ -298,11 +287,11 @@ groups = "i2c0_10_grp"; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; - pinctrl_i2c0_gpio: i2c0-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { mux { groups = "gpio0_50_grp", "gpio0_51_grp"; function = "gpio0"; @@ -311,7 +300,7 @@ conf { groups = "gpio0_50_grp", "gpio0_51_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -324,7 +313,7 @@ conf { groups = "sdio0_2_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; @@ -338,7 +327,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; mux-wp { @@ -351,7 +340,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -364,7 +353,7 @@ conf { groups = "uart1_10_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -387,7 +376,7 @@ conf { groups = "usb0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -403,13 +392,53 @@ }; }; +&qspi { + bootph-all; + status = "okay"; + num-cs = <1>; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; + }; +}; + &sdhci0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdhci0_default>; }; &uart1 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; diff --git a/arch/arm/boot/dts/xilinx/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts index 77943c16d33f..3b803c698473 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zc706.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts @@ -14,7 +14,10 @@ ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + spi0 = &qspi; mmc0 = &sdhci0; + nvmem0 = &eeprom; + rtc0 = &rtc; }; memory@0 { @@ -46,7 +49,6 @@ ethernet_phy: ethernet-phy@7 { reg = <7>; - device_type = "ethernet-phy"; }; }; @@ -100,7 +102,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - eeprom@54 { + eeprom: eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; }; @@ -122,7 +124,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - rtc@51 { + rtc: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -150,7 +152,7 @@ conf { groups = "ethernet0_0_grp"; slew-rate = <0>; - io-standard = <4>; + power-source = <4>; }; conf-rx { @@ -173,7 +175,7 @@ conf-mdio { groups = "mdio0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; }; @@ -187,7 +189,7 @@ conf { groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-pull-up { @@ -211,7 +213,7 @@ groups = "i2c0_10_grp"; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -224,7 +226,7 @@ conf { groups = "sdio0_2_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; @@ -238,7 +240,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; mux-wp { @@ -251,7 +253,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -264,7 +266,7 @@ conf { groups = "uart1_10_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -287,7 +289,7 @@ conf { groups = "usb0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -303,13 +305,54 @@ }; }; +&qspi { + bootph-all; + status = "okay"; + num-cs = <2>; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>, <1>; + parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */ + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; + }; +}; + &sdhci0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdhci0_default>; }; &uart1 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts index 0dd352289a45..5fe799c3c7cf 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts @@ -15,6 +15,7 @@ ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + spi0 = &qspi; spi1 = &spi1; }; @@ -45,7 +46,6 @@ ethernet_phy: ethernet-phy@7 { reg = <7>; - device_type = "ethernet-phy"; }; }; @@ -57,7 +57,43 @@ compatible = "atmel,24c02"; reg = <0x52>; }; +}; +&qspi { + status = "okay"; + num-cs = <1>; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; + }; }; &sdhci0 { @@ -85,6 +121,7 @@ }; &uart1 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts index 56732e8f6ca1..f9a086fe66d3 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts @@ -47,6 +47,36 @@ }; }; +&nfc0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + nand@0 { + reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "nand-fsbl-uboot"; + reg = <0x0 0x1000000>; + }; + partition@1000000 { + label = "nand-linux"; + reg = <0x1000000 0x2000000>; + }; + partition@3000000 { + label = "nand-rootfs"; + reg = <0x3000000 0x200000>; + }; + }; + }; +}; + +&smcc { + status = "okay"; +}; + &spi0 { status = "okay"; num-cs = <4>; @@ -54,6 +84,7 @@ }; &uart1 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts index d2359b789eb8..24520e7d3965 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts @@ -53,6 +53,40 @@ }; }; +&nor0 { + status = "okay"; + bank-width = <1>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "nor-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "nor-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "nor-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "nor-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "nor-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; +}; + +&smcc { + status = "okay"; +}; + &spi1 { status = "okay"; num-cs = <4>; @@ -60,5 +94,6 @@ }; &uart1 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts index 38d96adc870c..103e87ea7253 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts @@ -15,6 +15,7 @@ ethernet0 = &gem1; i2c0 = &i2c1; serial0 = &uart0; + spi0 = &qspi; spi1 = &spi0; }; @@ -40,7 +41,6 @@ ethernet_phy: ethernet-phy@7 { reg = <7>; - device_type = "ethernet-phy"; }; }; @@ -58,6 +58,44 @@ }; }; +&qspi { + status = "okay"; + num-cs = <2>; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>, <1>; + parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */ + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; + }; +}; + &spi0 { status = "okay"; num-cs = <4>; @@ -73,5 +111,6 @@ }; &uart0 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zed.dts b/arch/arm/boot/dts/xilinx/zynq-zed.dts index 6a5a93aa6552..52ba569b2b9f 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zed.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zed.dts @@ -13,6 +13,7 @@ aliases { ethernet0 = &gem0; serial0 = &uart1; + spi0 = &qspi; mmc0 = &sdhci0; }; @@ -43,15 +44,55 @@ ethernet_phy: ethernet-phy@0 { reg = <0>; - device_type = "ethernet-phy"; + }; +}; + +&qspi { + bootph-all; + status = "okay"; + num-cs = <1>; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; }; }; &sdhci0 { + bootph-all; status = "okay"; }; &uart1 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi index dfb1fbafe3aa..defef9c8da13 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi +++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi @@ -63,6 +63,11 @@ ps-clk-frequency = <33333333>; }; +&qspi { + bootph-all; + status = "okay"; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; @@ -73,14 +78,17 @@ }; &sdhci0 { + bootph-all; status = "okay"; }; &uart0 { + bootph-all; status = "okay"; }; &uart1 { + bootph-all; status = "okay"; }; @@ -97,9 +105,9 @@ status = "okay"; clock-frequency = <400000>; - stlm75@49 { + temperature-sensor@49 { status = "okay"; - compatible = "lm75"; + compatible = "st,stlm75"; reg = <0x49>; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts index 7b87e10d3953..56b917eec783 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts @@ -10,6 +10,8 @@ aliases { ethernet0 = &gem0; serial0 = &uart1; + spi0 = &qspi; + mmc0 = &sdhci0; }; memory@0 { @@ -49,15 +51,21 @@ ethernet_phy: ethernet-phy@0 { reg = <0>; - device_type = "ethernet-phy"; }; }; +&qspi { + bootph-all; + status = "okay"; +}; + &sdhci0 { + bootph-all; status = "okay"; }; &uart1 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo.dts b/arch/arm/boot/dts/xilinx/zynq-zybo.dts index 755f6f109d5a..fbc7d1b12e94 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zybo.dts +++ b/arch/arm/boot/dts/xilinx/zynq-zybo.dts @@ -13,6 +13,7 @@ aliases { ethernet0 = &gem0; serial0 = &uart1; + spi0 = &qspi; mmc0 = &sdhci0; }; @@ -44,15 +45,21 @@ ethernet_phy: ethernet-phy@0 { reg = <0>; - device_type = "ethernet-phy"; }; }; +&qspi { + bootph-all; + status = "okay"; +}; + &sdhci0 { + bootph-all; status = "okay"; }; &uart1 { + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh index 9ec11fac7d8d..34e2c6e31fd1 100755 --- a/arch/arm/boot/install.sh +++ b/arch/arm/boot/install.sh @@ -17,6 +17,8 @@ # $3 - kernel map file # $4 - default install path (blank if root directory) +set -e + if [ "$(basename $2)" = "zImage" ]; then # Compressed install echo "Installing compressed kernel" diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 9a9aa53547a6..d1e82a318e3b 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -307,13 +307,11 @@ static struct task_struct *bL_switcher_thread_create(int cpu, void *arg) { struct task_struct *task; - task = kthread_create_on_node(bL_switcher_thread, arg, - cpu_to_node(cpu), "kswitcher_%d", cpu); - if (!IS_ERR(task)) { - kthread_bind(task, cpu); - wake_up_process(task); - } else + task = kthread_run_on_cpu(bL_switcher_thread, arg, + cpu, "kswitcher_%d"); + if (IS_ERR(task)) pr_err("%s failed for CPU %d\n", __func__, cpu); + return task; } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 6d0c9f7268ba..cb6ef449b987 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -516,7 +516,7 @@ static void locomo_remove(struct platform_device *dev) */ static struct platform_driver locomo_device_driver = { .probe = locomo_probe, - .remove_new = locomo_remove, + .remove = locomo_remove, #ifdef CONFIG_PM .suspend = locomo_suspend, .resume = locomo_resume, @@ -816,10 +816,10 @@ EXPORT_SYMBOL(locomo_frontlight_set); * We model this as a regular bus type, and hang devices directly * off this. */ -static int locomo_match(struct device *_dev, struct device_driver *_drv) +static int locomo_match(struct device *_dev, const struct device_driver *_drv) { struct locomo_dev *dev = LOCOMO_DEV(_dev); - struct locomo_driver *drv = LOCOMO_DRV(_drv); + const struct locomo_driver *drv = LOCOMO_DRV(_drv); return dev->devid == drv->devid; } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 1fbd7363cf11..9846f30990f7 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1154,7 +1154,7 @@ static struct dev_pm_ops sa1111_pm_ops = { */ static struct platform_driver sa1111_device_driver = { .probe = sa1111_probe, - .remove_new = sa1111_remove, + .remove = sa1111_remove, .driver = { .name = "sa1111", .pm = &sa1111_pm_ops, @@ -1339,10 +1339,10 @@ EXPORT_SYMBOL_GPL(sa1111_get_irq); * We model this as a regular bus type, and hang devices directly * off this. */ -static int sa1111_match(struct device *_dev, struct device_driver *_drv) +static int sa1111_match(struct device *_dev, const struct device_driver *_drv) { struct sa1111_dev *dev = to_sa1111_device(_dev); - struct sa1111_driver *drv = SA1111_DRV(_drv); + const struct sa1111_driver *drv = SA1111_DRV(_drv); return !!(dev->devid & drv->devid); } diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 9018c7240166..0b08b6621878 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -250,7 +250,7 @@ static void scoop_remove(struct platform_device *pdev) static struct platform_driver scoop_driver = { .probe = scoop_probe, - .remove_new = scoop_remove, + .remove = scoop_remove, .suspend = scoop_suspend, .resume = scoop_resume, .driver = { diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 1d53aec4c836..ff13e1ecf4bb 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -16,6 +16,7 @@ CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9=y CONFIG_SOC_SAM9X60=y +CONFIG_SOC_SAM9X7=y # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y @@ -143,6 +144,7 @@ CONFIG_VIDEO_OV2640=m CONFIG_VIDEO_OV7740=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y +CONFIG_DRM_MICROCHIP_LVDS_SERIALIZER=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y CONFIG_FB_ATMEL=y @@ -199,6 +201,7 @@ CONFIG_AT_XDMAC=y CONFIG_IIO=y CONFIG_AT91_ADC=y CONFIG_AT91_SAMA5D2_ADC=y +CONFIG_PAC1934=m CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_PWM_ATMEL_HLCDC_PWM=y @@ -229,7 +232,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_DEV_ATMEL_AES=y CONFIG_CRYPTO_DEV_ATMEL_TDES=y CONFIG_CRYPTO_DEV_ATMEL_SHA=y -CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_ACORN_8x8=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index b5f0bd8dd536..27dc3bf6b124 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -7,7 +7,6 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y CONFIG_CGROUP_DEVICE=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 01b5a5a73f03..578c6a4af620 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -3,7 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_BASE_FULL is not set +CONFIG_BASE_SMALL=y # CONFIG_EPOLL is not set CONFIG_ARCH_MULTI_V4=y # CONFIG_ARCH_MULTI_V7 is not set @@ -78,7 +78,6 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_MINI_4x6=y # CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 3474e475373a..70b8c78386f4 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -249,7 +249,6 @@ CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC_T10DIF=m CONFIG_DMA_CMA=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_RT_MUTEXES=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 2849d17f5856..d76eb12d29a7 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -128,8 +128,6 @@ CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y CONFIG_PRINTK_TIME=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 7dece9d98828..2248afaf35b5 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -113,7 +113,6 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_LIBCRC32C=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_SPINLOCK=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 7ad48fdda1da..e81a5d6c1c20 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -370,7 +370,6 @@ CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRYPTO_DEV_EXYNOS_RNG=y CONFIG_CRYPTO_DEV_S5P=y -CONFIG_CRC_CCITT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=96 CONFIG_FONTS=y diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index 0376a65e8bc1..e19c1039fb93 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -43,6 +43,7 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_PL022=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 7327fce87808..062c1eb8dd60 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -68,6 +68,7 @@ CONFIG_BT=y CONFIG_BT_BNEP=m CONFIG_BT_HCIUART=y CONFIG_BT_HCIUART_LL=y +CONFIG_BT_NXPUART=m CONFIG_CFG80211=y CONFIG_CFG80211_WEXT=y CONFIG_MAC80211=y @@ -133,6 +134,7 @@ CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_MICREL_PHY=y CONFIG_AT803X_PHY=y +CONFIG_DP83867_PHY=y CONFIG_CAN_FLEXCAN=y CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m @@ -180,6 +182,7 @@ CONFIG_TOUCHSCREEN_SX8654=y CONFIG_TOUCHSCREEN_COLIBRI_VF50=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y +CONFIG_INPUT_GPIO_BEEPER=m CONFIG_SERIO_SERPORT=m # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_IMX=y @@ -211,6 +214,7 @@ CONFIG_GPIO_SIOX=m CONFIG_GPIO_VF610=y CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_BD71815=y CONFIG_GPIO_STMPE=y @@ -226,6 +230,8 @@ CONFIG_RN5T618_POWER=m CONFIG_SENSORS_MC13783_ADC=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_LM75=m CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_SY7636A=y CONFIG_THERMAL_STATISTICS=y @@ -249,6 +255,7 @@ CONFIG_MFD_ROHM_BD71828=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ANATOP=y CONFIG_REGULATOR_BD71815=y +CONFIG_REGULATOR_BD71828=y CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_DA9062=y CONFIG_REGULATOR_DA9063=y @@ -282,6 +289,9 @@ CONFIG_DRM_PANEL_LVDS=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y CONFIG_DRM_PANEL_SEIKO_43WVF1G=y +CONFIG_DRM_DISPLAY_CONNECTOR=y +CONFIG_DRM_LVDS_CODEC=m +CONFIG_DRM_SII902X=y CONFIG_DRM_TI_TFP410=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_DW_HDMI_CEC=y @@ -311,10 +321,10 @@ CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_EUKREA_TLV320=y CONFIG_SND_SOC_IMX_ES8328=y CONFIG_SND_SOC_IMX_SGTL5000=y -CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_FSL_ASOC_CARD=y CONFIG_SND_SOC_AC97_CODEC=y CONFIG_SND_SOC_CS42XX8_I2C=y +CONFIG_SND_SOC_SPDIF=y CONFIG_SND_SOC_TLV320AIC3X_I2C=y CONFIG_SND_SOC_WM8960=y CONFIG_SND_SOC_WM8962=y @@ -336,6 +346,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_TEST=m CONFIG_USB_EHSET_TEST_FIXTURE=m +CONFIG_USB_ONBOARD_DEV=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y @@ -470,10 +481,6 @@ CONFIG_SECURITYFS=y CONFIG_CRYPTO_DEV_FSL_CAAM=y CONFIG_CRYPTO_DEV_SAHARA=y CONFIG_CRYPTO_DEV_MXS_DCP=y -CONFIG_CRC_CCITT=m -CONFIG_CRC_T10DIF=y -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m CONFIG_CMA_SIZE_MBYTES=64 CONFIG_FONTS=y CONFIG_FONT_8x8=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 59c4835ffc97..c1291ca290b2 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -12,7 +12,7 @@ CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_BLK_DEV_INITRD=y # CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set +CONFIG_BASE_SMALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EXPERT=y CONFIG_PROFILING=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index d169da9b2824..2d489186e945 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -8,7 +8,7 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_LZ4 is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_UID16 is not set -# CONFIG_BASE_FULL is not set +CONFIG_BASE_SMALL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set @@ -147,8 +147,6 @@ CONFIG_EXT2_FS=y # CONFIG_INOTIFY_USER is not set CONFIG_JFFS2_FS=y # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 98e267213b21..9afccd76446b 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -179,7 +179,6 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_CRYPTO_ANSI_CPRNG=y # CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig index f5eeac9c65c3..275ddf7a3a14 100644 --- a/arch/arm/configs/milbeaut_m10v_defconfig +++ b/arch/arm/configs/milbeaut_m10v_defconfig @@ -107,10 +107,7 @@ CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_AES_ARM_CE=m CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_CRC32_ARM_CE=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC_ITU_T=m CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index f6f9e135353e..842a989baa27 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -67,7 +67,6 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index 1d41e73f4903..fa06d98e43fc 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -6,7 +6,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_EXPERT=y # CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set +CONFIG_BASE_SMALL=y # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set @@ -118,7 +118,6 @@ CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y CONFIG_KEYS=y -CONFIG_CRC32_BIT=y CONFIG_DMA_API_DEBUG=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig index 3ed73f184d83..e995e50537ef 100644 --- a/arch/arm/configs/mps2_defconfig +++ b/arch/arm/configs/mps2_defconfig @@ -5,7 +5,7 @@ CONFIG_LOG_BUF_SHIFT=16 CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EXPERT=y # CONFIG_UID16 is not set -# CONFIG_BASE_FULL is not set +CONFIG_BASE_SMALL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index 27d650635d9b..1a86dc305523 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -91,6 +91,5 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_CRAMFS=y CONFIG_MINIX_FS=y -CONFIG_CRC_CCITT=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 3f4ddcf49ec7..cf6180b4296e 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -289,8 +289,6 @@ CONFIG_NLS_UTF8=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b2955dcb5a53..ad037c175fdb 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -20,6 +20,7 @@ CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y +CONFIG_SOC_SAMA7D65=y CONFIG_SOC_SAMA7G5=y CONFIG_SOC_LAN966=y CONFIG_ARCH_BCM=y @@ -413,6 +414,7 @@ CONFIG_I2C_AT91=m CONFIG_I2C_BCM2835=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DAVINCI=y +CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_EMEV2=m @@ -469,6 +471,7 @@ CONFIG_SPI_XILINX=y CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y +CONFIG_PINCTRL_MCP23S08=m CONFIG_PINCTRL_MICROCHIP_SGPIO=y CONFIG_PINCTRL_OCELOT=y CONFIG_PINCTRL_PALMAS=y @@ -711,10 +714,10 @@ CONFIG_VIDEO_ADV7604_CEC=y CONFIG_VIDEO_ML86V7667=m CONFIG_IMX_IPUV3_CORE=m CONFIG_DRM=y -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set CONFIG_DRM_I2C_NXP_TDA998X=m CONFIG_DRM_NOUVEAU=m +# CONFIG_DRM_NOUVEAU_CH7006 is not set +# CONFIG_DRM_NOUVEAU_SIL164 is not set CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS_FIMD=y CONFIG_DRM_EXYNOS_MIXER=y @@ -885,7 +888,7 @@ CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_ISP1760=y CONFIG_USB_HSIC_USB3503=y -CONFIG_USB_ONBOARD_HUB=m +CONFIG_USB_ONBOARD_DEV=m CONFIG_AB8500_USB=y CONFIG_KEYSTONE_USB_PHY=m CONFIG_NOP_USB_XCEIV=y @@ -1304,7 +1307,6 @@ CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_AES_ARM_CE=m CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_CRC32_ARM_CE=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_FSL_CAAM=m CONFIG_CRYPTO_DEV_EXYNOS_RNG=m @@ -1321,5 +1323,8 @@ CONFIG_CRYPTO_DEV_STM32_HASH=m CONFIG_CRYPTO_DEV_STM32_CRYP=m CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_DEBUG_INFO_REDUCED=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 2467afd32146..23dbb80fcc2e 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -187,8 +187,6 @@ CONFIG_NLS_UTF8=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 43bc1255a5db..c76d66135abb 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -160,8 +160,6 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_CRYPTO_DEV_MXS_DCP=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC7=m CONFIG_FONTS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 729ea8157e2a..661e5d6894bd 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -9,7 +9,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set +CONFIG_BASE_SMALL=y # CONFIG_SHMEM is not set # CONFIG_KALLSYMS is not set CONFIG_PROFILING=y @@ -221,7 +221,6 @@ CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_LIBCRC32C=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 3a166c2f02bd..75b326bc7830 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -13,7 +13,6 @@ CONFIG_MEMCG=y CONFIG_BLK_CGROUP=y CONFIG_CGROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y CONFIG_CGROUP_DEVICE=y @@ -428,6 +427,7 @@ CONFIG_POWER_RESET_GPIO=y CONFIG_BATTERY_BQ27XXX=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_TWL4030=m +CONFIG_CHARGER_TWL6030=m CONFIG_CHARGER_BQ2415X=m CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24735=m @@ -706,11 +706,6 @@ CONFIG_CRYPTO_DEV_OMAP=m CONFIG_CRYPTO_DEV_OMAP_SHAM=m CONFIG_CRYPTO_DEV_OMAP_AES=m CONFIG_CRYPTO_DEV_OMAP_DES=m -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y CONFIG_DMA_CMA=y CONFIG_FONTS=y CONFIG_FONT_8x8=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 0629b088a584..62b9c6102789 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -136,7 +136,6 @@ CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRC_T10DIF=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index ce10fe2104bf..4748c7d33cb8 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -41,7 +41,6 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 1f28aea86014..49b59c600ae1 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -50,7 +50,6 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index f2ca5c9131b5..24fca8608554 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -277,6 +277,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_MUX_PCA954x=m CONFIG_I2C_MUX_PINCTRL=m +CONFIG_I2C_DESIGNWARE_CORE=m CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_GPIO=y CONFIG_I2C_PXA_SLAVE=y @@ -582,10 +583,6 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=m @@ -655,7 +652,6 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m @@ -667,8 +663,6 @@ CONFIG_CRYPTO_SHA1_ARM=m CONFIG_CRYPTO_SHA256_ARM=m CONFIG_CRYPTO_SHA512_ARM=m CONFIG_CRYPTO_AES_ARM=m -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=m CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 5dbe85c263de..02121eec3658 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -113,7 +113,6 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y -CONFIG_CRC_CCITT=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 9096a99b5abd..e447329398d5 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -212,6 +212,7 @@ CONFIG_VIDEO_HANTRO=m CONFIG_IIO=y CONFIG_AT91_ADC=y CONFIG_AT91_SAMA5D2_ADC=y +CONFIG_PAC1934=m CONFIG_ENVELOPE_DETECTOR=m CONFIG_DPOT_DAC=m CONFIG_MCP4531=m diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 7fa5d251ced2..e14720a9a5ac 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -12,6 +12,7 @@ CONFIG_EXPERT=y # CONFIG_IO_URING is not set CONFIG_KALLSYMS_ALL=y CONFIG_ARCH_AT91=y +CONFIG_SOC_SAMA7D65=y CONFIG_SOC_SAMA7G5=y CONFIG_ATMEL_CLOCKSOURCE_TCB=y # CONFIG_CACHE_L2X0 is not set @@ -193,6 +194,7 @@ CONFIG_STAGING=y CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y CONFIG_AT91_SAMA5D2_ADC=y +CONFIG_PAC1934=m CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_MCHP_EIC=y @@ -225,8 +227,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_DEV_ATMEL_AES=y CONFIG_CRYPTO_DEV_ATMEL_TDES=y CONFIG_CRYPTO_DEV_ATMEL_SHA=y -CONFIG_CRC_CCITT=y -CONFIG_CRC_ITU_T=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=32 CONFIG_CMA_ALIGNMENT=9 diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 091e1840933c..8c30ed14e52c 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -14,6 +14,7 @@ CONFIG_SCHED_MC=y CONFIG_NR_CPUS=8 CONFIG_HIGHMEM=y CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y @@ -24,6 +25,7 @@ CONFIG_CPUFREQ_DT=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y @@ -139,8 +141,8 @@ CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_RCAR_DU=y # CONFIG_DRM_RCAR_USE_MIPI_DSI is not set CONFIG_DRM_SHMOBILE=y -CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_DISPLAY_CONNECTOR=y CONFIG_DRM_LVDS_CODEC=y CONFIG_DRM_SII902X=y @@ -191,6 +193,7 @@ CONFIG_DW_DMAC=y CONFIG_RZN1_DMAMUX=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=y +CONFIG_RZ_DMAC=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R8A7794=y @@ -235,3 +238,4 @@ CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_FS=y +CONFIG_ARM_DEBUG_WX=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index e82c3866b810..294906c8f16e 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -83,6 +83,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 CONFIG_SERIAL_8250_DW=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_CADENCE_QUADSPI=y diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig index c8128a6180e7..a8f992fdb30d 100644 --- a/arch/arm/configs/spear13xx_defconfig +++ b/arch/arm/configs/spear13xx_defconfig @@ -62,6 +62,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_RAW_DRIVER=y CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_PL022=y diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index 97ea2e9a6f07..8dc5a388759c 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -42,6 +42,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_RAW_DRIVER=y CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_PL022=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index a7a3413ac968..4e9e1a6ff381 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -33,6 +33,7 @@ CONFIG_STMMAC_ETH=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_PL022=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 294d16ddeb18..ffec59e3f49c 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -234,8 +234,6 @@ CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=m CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index b9fe3fbed5ae..dcd9c316072e 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -6,23 +6,25 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EXPERT=y # CONFIG_UID16 is not set -# CONFIG_BASE_FULL is not set +# CONFIG_POSIX_TIMERS is not set +CONFIG_BASE_SMALL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set -# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IO_URING is not set +# CONFIG_ADVISE_SYSCALLS is not set # CONFIG_MMU is not set CONFIG_ARCH_STM32=y CONFIG_CPU_V7M_NUM_IRQ=240 CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x90000000 -CONFIG_FLASH_MEM_BASE=0x08000000 -CONFIG_FLASH_SIZE=0x00200000 # CONFIG_ATAGS is not set CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x08008000 +# CONFIG_SUSPEND is not set +# CONFIG_GCC_PLUGINS is not set CONFIG_BINFMT_FLAT=y # CONFIG_COREDUMP is not set # CONFIG_VM_EVENT_COUNTERS is not set @@ -63,6 +65,7 @@ CONFIG_DMADEVICES=y CONFIG_STM32_DMA=y CONFIG_STM32_DMAMUX=y CONFIG_STM32_MDMA=y +# CONFIG_COMMON_CLK_STM32MP is not set CONFIG_IIO=y CONFIG_STM32_ADC_CORE=y CONFIG_STM32_ADC=y @@ -71,13 +74,8 @@ CONFIG_EXT3_FS=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set CONFIG_NLS=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SLUB_DEBUG is not set -# CONFIG_SCHED_DEBUG is not set -CONFIG_CRYPTO=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index bddc82f78942..a83d29fed175 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -110,6 +110,7 @@ CONFIG_DRM_PANEL_LVDS=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y CONFIG_DRM_SIMPLE_BRIDGE=y +CONFIG_DRM_DW_HDMI=y CONFIG_DRM_LIMA=y CONFIG_FB_SIMPLE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index d2a094ad360c..3a9bda2bf422 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -6,7 +6,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_DEBUG=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index 96ad442089bd..cdb6065e04fd 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -14,7 +14,6 @@ CONFIG_CPUSETS=y CONFIG_BLK_DEV_INITRD=y CONFIG_PROFILING=y CONFIG_ARCH_VEXPRESS=y -CONFIG_ARCH_VEXPRESS_DCSCB=y CONFIG_ARCH_VEXPRESS_TC2_PM=y CONFIG_SMP=y CONFIG_HAVE_ARM_ARCH_TIMER=y diff --git a/arch/arm/configs/wpcm450_defconfig b/arch/arm/configs/wpcm450_defconfig index 45483deab034..cd4b3e70ff68 100644 --- a/arch/arm/configs/wpcm450_defconfig +++ b/arch/arm/configs/wpcm450_defconfig @@ -191,9 +191,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y CONFIG_PKCS7_MESSAGE_PARSER=y CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_CRC_CCITT=y -CONFIG_CRC_ITU_T=m -CONFIG_LIBCRC32C=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index 847b7a003356..23e4ea067ddb 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -3,10 +3,12 @@ menu "Accelerated Cryptographic Algorithms for CPU (arm)" config CRYPTO_CURVE25519_NEON - tristate "Public key crypto: Curve25519 (NEON)" + tristate depends on KERNEL_MODE_NEON + select CRYPTO_KPP select CRYPTO_LIB_CURVE25519_GENERIC select CRYPTO_ARCH_HAVE_LIB_CURVE25519 + default CRYPTO_LIB_CURVE25519_INTERNAL help Curve25519 algorithm @@ -45,9 +47,10 @@ config CRYPTO_NHPOLY1305_NEON - NEON (Advanced SIMD) extensions config CRYPTO_POLY1305_ARM - tristate "Hash functions: Poly1305 (NEON)" + tristate select CRYPTO_HASH select CRYPTO_ARCH_HAVE_LIB_POLY1305 + default CRYPTO_LIB_POLY1305_INTERNAL help Poly1305 authenticator algorithm (RFC7539) @@ -166,10 +169,9 @@ config CRYPTO_AES_ARM config CRYPTO_AES_ARM_BS tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (bit-sliced NEON)" depends on KERNEL_MODE_NEON + select CRYPTO_AES_ARM select CRYPTO_SKCIPHER select CRYPTO_LIB_AES - select CRYPTO_AES - select CRYPTO_CBC select CRYPTO_SIMD help Length-preserving ciphers: AES cipher algorithms (FIPS-197) @@ -183,8 +185,15 @@ config CRYPTO_AES_ARM_BS Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode and for XTS mode encryption, CBC and XTS mode decryption speedup is around 25%. (CBC encryption speed is not affected by this driver.) - This implementation does not rely on any lookup tables so it is - believed to be invulnerable to cache timing attacks. + + The bit sliced AES code does not use lookup tables, so it is believed + to be invulnerable to cache timing attacks. However, since the bit + sliced AES code cannot process single blocks efficiently, in certain + cases table-based code with some countermeasures against cache timing + attacks will still be used as a fallback method; specifically CBC + encryption (not CBC decryption), the encryption of XTS tweaks, XTS + ciphertext stealing when the message isn't a multiple of 16 bytes, and + CTR when invoked in a context in which NEON instructions are unusable. config CRYPTO_AES_ARM_CE tristate "Ciphers: AES, modes: ECB/CBC/CTS/CTR/XTS (ARMv8 Crypto Extensions)" @@ -206,9 +215,10 @@ config CRYPTO_AES_ARM_CE - ARMv8 Crypto Extensions config CRYPTO_CHACHA20_NEON - tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (NEON)" + tristate select CRYPTO_SKCIPHER select CRYPTO_ARCH_HAVE_LIB_CHACHA + default CRYPTO_LIB_CHACHA_INTERNAL help Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12 stream cipher algorithms @@ -216,30 +226,5 @@ config CRYPTO_CHACHA20_NEON Architecture: arm using: - NEON (Advanced SIMD) extensions -config CRYPTO_CRC32_ARM_CE - tristate "CRC32C and CRC32" - depends on KERNEL_MODE_NEON - depends on CRC32 - select CRYPTO_HASH - help - CRC32c CRC algorithm with the iSCSI polynomial (RFC 3385 and RFC 3720) - and CRC32 CRC algorithm (IEEE 802.3) - - Architecture: arm using: - - CRC and/or PMULL instructions - - Drivers: crc32-arm-ce and crc32c-arm-ce - -config CRYPTO_CRCT10DIF_ARM_CE - tristate "CRCT10DIF" - depends on KERNEL_MODE_NEON - depends on CRC_T10DIF - select CRYPTO_HASH - help - CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF) - - Architecture: arm using: - - PMULL (Polynomial Multiply Long) instructions - endmenu diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index 13e62c7c25dc..3d0e23ff9e74 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -20,8 +20,6 @@ obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o -obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o -obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o aes-arm-y := aes-cipher-core.o aes-cipher-glue.o aes-arm-bs-y := aes-neonbs-core.o aes-neonbs-glue.o @@ -37,8 +35,6 @@ sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o -crct10dif-arm-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o -crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o chacha-neon-y := chacha-scalar-core.o chacha-glue.o chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o poly1305-arm-y := poly1305-core.o poly1305-glue.o diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b668c97663ec..1cf61f51e766 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -8,7 +8,7 @@ #include <asm/hwcap.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <crypto/aes.h> #include <crypto/ctr.h> #include <crypto/internal/simd.h> @@ -399,9 +399,9 @@ static int ctr_encrypt(struct skcipher_request *req) } if (walk.nbytes) { u8 __aligned(8) tail[AES_BLOCK_SIZE]; + const u8 *tsrc = walk.src.virt.addr; unsigned int nbytes = walk.nbytes; u8 *tdst = walk.dst.virt.addr; - u8 *tsrc = walk.src.virt.addr; /* * Tell aes_ctr_encrypt() to process a tail block. @@ -711,7 +711,7 @@ static int __init aes_init(void) algname = aes_algs[i].base.cra_name + 2; drvname = aes_algs[i].base.cra_driver_name + 2; basename = aes_algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto unregister_simds; diff --git a/arch/arm/crypto/aes-cipher-glue.c b/arch/arm/crypto/aes-cipher-glue.c index 6dfaef2d8f91..29efb7833960 100644 --- a/arch/arm/crypto/aes-cipher-glue.c +++ b/arch/arm/crypto/aes-cipher-glue.c @@ -9,9 +9,10 @@ #include <crypto/aes.h> #include <crypto/algapi.h> #include <linux/module.h> +#include "aes-cipher.h" -asmlinkage void __aes_arm_encrypt(u32 *rk, int rounds, const u8 *in, u8 *out); -asmlinkage void __aes_arm_decrypt(u32 *rk, int rounds, const u8 *in, u8 *out); +EXPORT_SYMBOL_GPL(__aes_arm_encrypt); +EXPORT_SYMBOL_GPL(__aes_arm_decrypt); static void aes_arm_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { diff --git a/arch/arm/crypto/aes-cipher.h b/arch/arm/crypto/aes-cipher.h new file mode 100644 index 000000000000..d5db2b87eb69 --- /dev/null +++ b/arch/arm/crypto/aes-cipher.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef ARM_CRYPTO_AES_CIPHER_H +#define ARM_CRYPTO_AES_CIPHER_H + +#include <linux/linkage.h> +#include <linux/types.h> + +asmlinkage void __aes_arm_encrypt(const u32 rk[], int rounds, + const u8 *in, u8 *out); +asmlinkage void __aes_arm_decrypt(const u32 rk[], int rounds, + const u8 *in, u8 *out); + +#endif /* ARM_CRYPTO_AES_CIPHER_H */ diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index f00f042ef357..f6be80b5938b 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -9,23 +9,22 @@ #include <asm/simd.h> #include <crypto/aes.h> #include <crypto/ctr.h> -#include <crypto/internal/cipher.h> #include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> #include <crypto/scatterwalk.h> #include <crypto/xts.h> #include <linux/module.h> +#include "aes-cipher.h" MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_DESCRIPTION("Bit sliced AES using NEON instructions"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS_CRYPTO("ecb(aes)"); -MODULE_ALIAS_CRYPTO("cbc(aes)-all"); +MODULE_ALIAS_CRYPTO("cbc(aes)"); MODULE_ALIAS_CRYPTO("ctr(aes)"); MODULE_ALIAS_CRYPTO("xts(aes)"); -MODULE_IMPORT_NS(CRYPTO_INTERNAL); - asmlinkage void aesbs_convert_key(u8 out[], u32 const rk[], int rounds); asmlinkage void aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], @@ -51,13 +50,13 @@ struct aesbs_ctx { struct aesbs_cbc_ctx { struct aesbs_ctx key; - struct crypto_skcipher *enc_tfm; + struct crypto_aes_ctx fallback; }; struct aesbs_xts_ctx { struct aesbs_ctx key; - struct crypto_cipher *cts_tfm; - struct crypto_cipher *tweak_tfm; + struct crypto_aes_ctx fallback; + struct crypto_aes_ctx tweak_key; }; struct aesbs_ctr_ctx { @@ -128,37 +127,49 @@ static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - struct crypto_aes_ctx rk; int err; - err = aes_expandkey(&rk, in_key, key_len); + err = aes_expandkey(&ctx->fallback, in_key, key_len); if (err) return err; ctx->key.rounds = 6 + key_len / 4; kernel_neon_begin(); - aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds); + aesbs_convert_key(ctx->key.rk, ctx->fallback.key_enc, ctx->key.rounds); kernel_neon_end(); - memzero_explicit(&rk, sizeof(rk)); - return crypto_skcipher_setkey(ctx->enc_tfm, in_key, key_len); + return 0; } static int cbc_encrypt(struct skcipher_request *req) { - struct skcipher_request *subreq = skcipher_request_ctx(req); struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + const struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; + unsigned int nbytes; + int err; - skcipher_request_set_tfm(subreq, ctx->enc_tfm); - skcipher_request_set_callback(subreq, - skcipher_request_flags(req), - NULL, NULL); - skcipher_request_set_crypt(subreq, req->src, req->dst, - req->cryptlen, req->iv); + err = skcipher_walk_virt(&walk, req, false); - return crypto_skcipher_encrypt(subreq); + while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) { + const u8 *src = walk.src.virt.addr; + u8 *dst = walk.dst.virt.addr; + u8 *prev = walk.iv; + + do { + crypto_xor_cpy(dst, src, prev, AES_BLOCK_SIZE); + __aes_arm_encrypt(ctx->fallback.key_enc, + ctx->key.rounds, dst, dst); + prev = dst; + src += AES_BLOCK_SIZE; + dst += AES_BLOCK_SIZE; + nbytes -= AES_BLOCK_SIZE; + } while (nbytes >= AES_BLOCK_SIZE); + memcpy(walk.iv, prev, AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, nbytes); + } + return err; } static int cbc_decrypt(struct skcipher_request *req) @@ -189,30 +200,6 @@ static int cbc_decrypt(struct skcipher_request *req) return err; } -static int cbc_init(struct crypto_skcipher *tfm) -{ - struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - unsigned int reqsize; - - ctx->enc_tfm = crypto_alloc_skcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC | - CRYPTO_ALG_NEED_FALLBACK); - if (IS_ERR(ctx->enc_tfm)) - return PTR_ERR(ctx->enc_tfm); - - reqsize = sizeof(struct skcipher_request); - reqsize += crypto_skcipher_reqsize(ctx->enc_tfm); - crypto_skcipher_set_reqsize(tfm, reqsize); - - return 0; -} - -static void cbc_exit(struct crypto_skcipher *tfm) -{ - struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - - crypto_free_skcipher(ctx->enc_tfm); -} - static int aesbs_ctr_setkey_sync(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { @@ -270,16 +257,8 @@ static int ctr_encrypt(struct skcipher_request *req) static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst) { struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm); - unsigned long flags; - - /* - * Temporarily disable interrupts to avoid races where - * cachelines are evicted when the CPU is interrupted - * to do something else. - */ - local_irq_save(flags); - aes_encrypt(&ctx->fallback, dst, src); - local_irq_restore(flags); + + __aes_arm_encrypt(ctx->fallback.key_enc, ctx->key.rounds, src, dst); } static int ctr_encrypt_sync(struct skcipher_request *req) @@ -301,45 +280,23 @@ static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key, return err; key_len /= 2; - err = crypto_cipher_setkey(ctx->cts_tfm, in_key, key_len); + err = aes_expandkey(&ctx->fallback, in_key, key_len); if (err) return err; - err = crypto_cipher_setkey(ctx->tweak_tfm, in_key + key_len, key_len); + err = aes_expandkey(&ctx->tweak_key, in_key + key_len, key_len); if (err) return err; return aesbs_setkey(tfm, in_key, key_len); } -static int xts_init(struct crypto_skcipher *tfm) -{ - struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); - - ctx->cts_tfm = crypto_alloc_cipher("aes", 0, 0); - if (IS_ERR(ctx->cts_tfm)) - return PTR_ERR(ctx->cts_tfm); - - ctx->tweak_tfm = crypto_alloc_cipher("aes", 0, 0); - if (IS_ERR(ctx->tweak_tfm)) - crypto_free_cipher(ctx->cts_tfm); - - return PTR_ERR_OR_ZERO(ctx->tweak_tfm); -} - -static void xts_exit(struct crypto_skcipher *tfm) -{ - struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); - - crypto_free_cipher(ctx->tweak_tfm); - crypto_free_cipher(ctx->cts_tfm); -} - static int __xts_crypt(struct skcipher_request *req, bool encrypt, void (*fn)(u8 out[], u8 const in[], u8 const rk[], int rounds, int blocks, u8 iv[], int)) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); + const int rounds = ctx->key.rounds; int tail = req->cryptlen % AES_BLOCK_SIZE; struct skcipher_request subreq; u8 buf[2 * AES_BLOCK_SIZE]; @@ -363,7 +320,7 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt, if (err) return err; - crypto_cipher_encrypt_one(ctx->tweak_tfm, walk.iv, walk.iv); + __aes_arm_encrypt(ctx->tweak_key.key_enc, rounds, walk.iv, walk.iv); while (walk.nbytes >= AES_BLOCK_SIZE) { unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE; @@ -377,7 +334,7 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt, kernel_neon_begin(); fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->key.rk, - ctx->key.rounds, blocks, walk.iv, reorder_last_tweak); + rounds, blocks, walk.iv, reorder_last_tweak); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes - blocks * AES_BLOCK_SIZE); @@ -395,9 +352,9 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt, crypto_xor(buf, req->iv, AES_BLOCK_SIZE); if (encrypt) - crypto_cipher_encrypt_one(ctx->cts_tfm, buf, buf); + __aes_arm_encrypt(ctx->fallback.key_enc, rounds, buf, buf); else - crypto_cipher_decrypt_one(ctx->cts_tfm, buf, buf); + __aes_arm_decrypt(ctx->fallback.key_dec, rounds, buf, buf); crypto_xor(buf, req->iv, AES_BLOCK_SIZE); @@ -438,8 +395,7 @@ static struct skcipher_alg aes_algs[] = { { .base.cra_blocksize = AES_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct aesbs_cbc_ctx), .base.cra_module = THIS_MODULE, - .base.cra_flags = CRYPTO_ALG_INTERNAL | - CRYPTO_ALG_NEED_FALLBACK, + .base.cra_flags = CRYPTO_ALG_INTERNAL, .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, @@ -448,8 +404,6 @@ static struct skcipher_alg aes_algs[] = { { .setkey = aesbs_cbc_setkey, .encrypt = cbc_encrypt, .decrypt = cbc_decrypt, - .init = cbc_init, - .exit = cbc_exit, }, { .base.cra_name = "__ctr(aes)", .base.cra_driver_name = "__ctr-aes-neonbs", @@ -499,8 +453,6 @@ static struct skcipher_alg aes_algs[] = { { .setkey = aesbs_xts_setkey, .encrypt = xts_encrypt, .decrypt = xts_decrypt, - .init = xts_init, - .exit = xts_exit, } }; static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)]; @@ -539,7 +491,7 @@ static int __init aes_init(void) algname = aes_algs[i].base.cra_name + 2; drvname = aes_algs[i].base.cra_driver_name + 2; basename = aes_algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto unregister_simds; diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c index cdde8fd01f8f..50e635512046 100644 --- a/arch/arm/crypto/chacha-glue.c +++ b/arch/arm/crypto/chacha-glue.c @@ -76,12 +76,6 @@ void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds) } EXPORT_SYMBOL(hchacha_block_arch); -void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv) -{ - chacha_init_generic(state, key, iv); -} -EXPORT_SYMBOL(chacha_init_arch); - void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes, int nrounds) { @@ -116,7 +110,7 @@ static int chacha_stream_xor(struct skcipher_request *req, err = skcipher_walk_virt(&walk, req, false); - chacha_init_generic(state, ctx->key, iv); + chacha_init(state, ctx->key, iv); while (walk.nbytes > 0) { unsigned int nbytes = walk.nbytes; @@ -166,7 +160,7 @@ static int do_xchacha(struct skcipher_request *req, bool neon) u32 state[16]; u8 real_iv[16]; - chacha_init_generic(state, ctx->key, req->iv); + chacha_init(state, ctx->key, req->iv); if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) { hchacha_block_arm(state, subctx.key, ctx->nrounds); diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c deleted file mode 100644 index 2208445808d7..000000000000 --- a/arch/arm/crypto/crc32-ce-glue.c +++ /dev/null @@ -1,246 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions - * - * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> - */ - -#include <linux/cpufeature.h> -#include <linux/crc32.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <crypto/internal/hash.h> -#include <crypto/internal/simd.h> - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <asm/simd.h> -#include <asm/unaligned.h> - -#define PMULL_MIN_LEN 64L /* minimum size of buffer - * for crc32_pmull_le_16 */ -#define SCALE_F 16L /* size of NEON register */ - -asmlinkage u32 crc32_pmull_le(const u8 buf[], u32 len, u32 init_crc); -asmlinkage u32 crc32_armv8_le(u32 init_crc, const u8 buf[], u32 len); - -asmlinkage u32 crc32c_pmull_le(const u8 buf[], u32 len, u32 init_crc); -asmlinkage u32 crc32c_armv8_le(u32 init_crc, const u8 buf[], u32 len); - -static u32 (*fallback_crc32)(u32 init_crc, const u8 buf[], u32 len); -static u32 (*fallback_crc32c)(u32 init_crc, const u8 buf[], u32 len); - -static int crc32_cra_init(struct crypto_tfm *tfm) -{ - u32 *key = crypto_tfm_ctx(tfm); - - *key = 0; - return 0; -} - -static int crc32c_cra_init(struct crypto_tfm *tfm) -{ - u32 *key = crypto_tfm_ctx(tfm); - - *key = ~0; - return 0; -} - -static int crc32_setkey(struct crypto_shash *hash, const u8 *key, - unsigned int keylen) -{ - u32 *mctx = crypto_shash_ctx(hash); - - if (keylen != sizeof(u32)) - return -EINVAL; - *mctx = le32_to_cpup((__le32 *)key); - return 0; -} - -static int crc32_init(struct shash_desc *desc) -{ - u32 *mctx = crypto_shash_ctx(desc->tfm); - u32 *crc = shash_desc_ctx(desc); - - *crc = *mctx; - return 0; -} - -static int crc32_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - - *crc = crc32_armv8_le(*crc, data, length); - return 0; -} - -static int crc32c_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - - *crc = crc32c_armv8_le(*crc, data, length); - return 0; -} - -static int crc32_final(struct shash_desc *desc, u8 *out) -{ - u32 *crc = shash_desc_ctx(desc); - - put_unaligned_le32(*crc, out); - return 0; -} - -static int crc32c_final(struct shash_desc *desc, u8 *out) -{ - u32 *crc = shash_desc_ctx(desc); - - put_unaligned_le32(~*crc, out); - return 0; -} - -static int crc32_pmull_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - unsigned int l; - - if (crypto_simd_usable()) { - if ((u32)data % SCALE_F) { - l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F)); - - *crc = fallback_crc32(*crc, data, l); - - data += l; - length -= l; - } - - if (length >= PMULL_MIN_LEN) { - l = round_down(length, SCALE_F); - - kernel_neon_begin(); - *crc = crc32_pmull_le(data, l, *crc); - kernel_neon_end(); - - data += l; - length -= l; - } - } - - if (length > 0) - *crc = fallback_crc32(*crc, data, length); - - return 0; -} - -static int crc32c_pmull_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - unsigned int l; - - if (crypto_simd_usable()) { - if ((u32)data % SCALE_F) { - l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F)); - - *crc = fallback_crc32c(*crc, data, l); - - data += l; - length -= l; - } - - if (length >= PMULL_MIN_LEN) { - l = round_down(length, SCALE_F); - - kernel_neon_begin(); - *crc = crc32c_pmull_le(data, l, *crc); - kernel_neon_end(); - - data += l; - length -= l; - } - } - - if (length > 0) - *crc = fallback_crc32c(*crc, data, length); - - return 0; -} - -static struct shash_alg crc32_pmull_algs[] = { { - .setkey = crc32_setkey, - .init = crc32_init, - .update = crc32_update, - .final = crc32_final, - .descsize = sizeof(u32), - .digestsize = sizeof(u32), - - .base.cra_ctxsize = sizeof(u32), - .base.cra_init = crc32_cra_init, - .base.cra_name = "crc32", - .base.cra_driver_name = "crc32-arm-ce", - .base.cra_priority = 200, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = 1, - .base.cra_module = THIS_MODULE, -}, { - .setkey = crc32_setkey, - .init = crc32_init, - .update = crc32c_update, - .final = crc32c_final, - .descsize = sizeof(u32), - .digestsize = sizeof(u32), - - .base.cra_ctxsize = sizeof(u32), - .base.cra_init = crc32c_cra_init, - .base.cra_name = "crc32c", - .base.cra_driver_name = "crc32c-arm-ce", - .base.cra_priority = 200, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = 1, - .base.cra_module = THIS_MODULE, -} }; - -static int __init crc32_pmull_mod_init(void) -{ - if (elf_hwcap2 & HWCAP2_PMULL) { - crc32_pmull_algs[0].update = crc32_pmull_update; - crc32_pmull_algs[1].update = crc32c_pmull_update; - - if (elf_hwcap2 & HWCAP2_CRC32) { - fallback_crc32 = crc32_armv8_le; - fallback_crc32c = crc32c_armv8_le; - } else { - fallback_crc32 = crc32_le; - fallback_crc32c = __crc32c_le; - } - } else if (!(elf_hwcap2 & HWCAP2_CRC32)) { - return -ENODEV; - } - - return crypto_register_shashes(crc32_pmull_algs, - ARRAY_SIZE(crc32_pmull_algs)); -} - -static void __exit crc32_pmull_mod_exit(void) -{ - crypto_unregister_shashes(crc32_pmull_algs, - ARRAY_SIZE(crc32_pmull_algs)); -} - -static const struct cpu_feature __maybe_unused crc32_cpu_feature[] = { - { cpu_feature(CRC32) }, { cpu_feature(PMULL) }, { } -}; -MODULE_DEVICE_TABLE(cpu, crc32_cpu_feature); - -module_init(crc32_pmull_mod_init); -module_exit(crc32_pmull_mod_exit); - -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CRYPTO("crc32"); -MODULE_ALIAS_CRYPTO("crc32c"); diff --git a/arch/arm/crypto/crct10dif-ce-glue.c b/arch/arm/crypto/crct10dif-ce-glue.c deleted file mode 100644 index e9191a8c87b9..000000000000 --- a/arch/arm/crypto/crct10dif-ce-glue.c +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions - * - * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> - */ - -#include <linux/crc-t10dif.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <crypto/internal/hash.h> -#include <crypto/internal/simd.h> - -#include <asm/neon.h> -#include <asm/simd.h> - -#define CRC_T10DIF_PMULL_CHUNK_SIZE 16U - -asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len); - -static int crct10dif_init(struct shash_desc *desc) -{ - u16 *crc = shash_desc_ctx(desc); - - *crc = 0; - return 0; -} - -static int crct10dif_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u16 *crc = shash_desc_ctx(desc); - - if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) { - kernel_neon_begin(); - *crc = crc_t10dif_pmull(*crc, data, length); - kernel_neon_end(); - } else { - *crc = crc_t10dif_generic(*crc, data, length); - } - - return 0; -} - -static int crct10dif_final(struct shash_desc *desc, u8 *out) -{ - u16 *crc = shash_desc_ctx(desc); - - *(u16 *)out = *crc; - return 0; -} - -static struct shash_alg crc_t10dif_alg = { - .digestsize = CRC_T10DIF_DIGEST_SIZE, - .init = crct10dif_init, - .update = crct10dif_update, - .final = crct10dif_final, - .descsize = CRC_T10DIF_DIGEST_SIZE, - - .base.cra_name = "crct10dif", - .base.cra_driver_name = "crct10dif-arm-ce", - .base.cra_priority = 200, - .base.cra_blocksize = CRC_T10DIF_BLOCK_SIZE, - .base.cra_module = THIS_MODULE, -}; - -static int __init crc_t10dif_mod_init(void) -{ - if (!(elf_hwcap2 & HWCAP2_PMULL)) - return -ENODEV; - - return crypto_register_shash(&crc_t10dif_alg); -} - -static void __exit crc_t10dif_mod_exit(void) -{ - crypto_unregister_shash(&crc_t10dif_alg); -} - -module_init(crc_t10dif_mod_init); -module_exit(crc_t10dif_mod_exit); - -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CRYPTO("crct10dif"); diff --git a/arch/arm/crypto/curve25519-glue.c b/arch/arm/crypto/curve25519-glue.c index 9bdafd57888c..e7b87e09dd99 100644 --- a/arch/arm/crypto/curve25519-glue.c +++ b/arch/arm/crypto/curve25519-glue.c @@ -133,4 +133,5 @@ module_exit(arm_curve25519_exit); MODULE_ALIAS_CRYPTO("curve25519"); MODULE_ALIAS_CRYPTO("curve25519-neon"); +MODULE_DESCRIPTION("Public key crypto: Curve25519 (NEON-accelerated)"); MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c index 3ddf05b4234d..aabfcf522a2c 100644 --- a/arch/arm/crypto/ghash-ce-glue.c +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -9,7 +9,7 @@ #include <asm/hwcap.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <crypto/aes.h> #include <crypto/gcm.h> #include <crypto/b128ops.h> @@ -55,10 +55,6 @@ struct ghash_desc_ctx { u32 count; }; -struct ghash_async_ctx { - struct cryptd_ahash *cryptd_tfm; -}; - asmlinkage void pmull_ghash_update_p64(int blocks, u64 dg[], const char *src, u64 const h[][2], const char *head); @@ -78,34 +74,12 @@ static int ghash_init(struct shash_desc *desc) static void ghash_do_update(int blocks, u64 dg[], const char *src, struct ghash_key *key, const char *head) { - if (likely(crypto_simd_usable())) { - kernel_neon_begin(); - if (static_branch_likely(&use_p64)) - pmull_ghash_update_p64(blocks, dg, src, key->h, head); - else - pmull_ghash_update_p8(blocks, dg, src, key->h, head); - kernel_neon_end(); - } else { - be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) }; - - do { - const u8 *in = src; - - if (head) { - in = head; - blocks++; - head = NULL; - } else { - src += GHASH_BLOCK_SIZE; - } - - crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE); - gf128mul_lle(&dst, &key->k); - } while (--blocks); - - dg[0] = be64_to_cpu(dst.b); - dg[1] = be64_to_cpu(dst.a); - } + kernel_neon_begin(); + if (static_branch_likely(&use_p64)) + pmull_ghash_update_p64(blocks, dg, src, key->h, head); + else + pmull_ghash_update_p8(blocks, dg, src, key->h, head); + kernel_neon_end(); } static int ghash_update(struct shash_desc *desc, const u8 *src, @@ -206,162 +180,13 @@ static struct shash_alg ghash_alg = { .descsize = sizeof(struct ghash_desc_ctx), .base.cra_name = "ghash", - .base.cra_driver_name = "ghash-ce-sync", - .base.cra_priority = 300 - 1, + .base.cra_driver_name = "ghash-ce", + .base.cra_priority = 300, .base.cra_blocksize = GHASH_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct ghash_key) + sizeof(u64[2]), .base.cra_module = THIS_MODULE, }; -static int ghash_async_init(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *cryptd_req = ahash_request_ctx(req); - struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - struct shash_desc *desc = cryptd_shash_desc(cryptd_req); - struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); - - desc->tfm = child; - return crypto_shash_init(desc); -} - -static int ghash_async_update(struct ahash_request *req) -{ - struct ahash_request *cryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - - if (!crypto_simd_usable() || - (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { - memcpy(cryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); - return crypto_ahash_update(cryptd_req); - } else { - struct shash_desc *desc = cryptd_shash_desc(cryptd_req); - return shash_ahash_update(req, desc); - } -} - -static int ghash_async_final(struct ahash_request *req) -{ - struct ahash_request *cryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - - if (!crypto_simd_usable() || - (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { - memcpy(cryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); - return crypto_ahash_final(cryptd_req); - } else { - struct shash_desc *desc = cryptd_shash_desc(cryptd_req); - return crypto_shash_final(desc, req->result); - } -} - -static int ghash_async_digest(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *cryptd_req = ahash_request_ctx(req); - struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - - if (!crypto_simd_usable() || - (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { - memcpy(cryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); - return crypto_ahash_digest(cryptd_req); - } else { - struct shash_desc *desc = cryptd_shash_desc(cryptd_req); - struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); - - desc->tfm = child; - return shash_ahash_digest(req, desc); - } -} - -static int ghash_async_import(struct ahash_request *req, const void *in) -{ - struct ahash_request *cryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct shash_desc *desc = cryptd_shash_desc(cryptd_req); - - desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm); - - return crypto_shash_import(desc, in); -} - -static int ghash_async_export(struct ahash_request *req, void *out) -{ - struct ahash_request *cryptd_req = ahash_request_ctx(req); - struct shash_desc *desc = cryptd_shash_desc(cryptd_req); - - return crypto_shash_export(desc, out); -} - -static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key, - unsigned int keylen) -{ - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct crypto_ahash *child = &ctx->cryptd_tfm->base; - - crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK); - crypto_ahash_set_flags(child, crypto_ahash_get_flags(tfm) - & CRYPTO_TFM_REQ_MASK); - return crypto_ahash_setkey(child, key, keylen); -} - -static int ghash_async_init_tfm(struct crypto_tfm *tfm) -{ - struct cryptd_ahash *cryptd_tfm; - struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); - - cryptd_tfm = cryptd_alloc_ahash("ghash-ce-sync", 0, 0); - if (IS_ERR(cryptd_tfm)) - return PTR_ERR(cryptd_tfm); - ctx->cryptd_tfm = cryptd_tfm; - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct ahash_request) + - crypto_ahash_reqsize(&cryptd_tfm->base)); - - return 0; -} - -static void ghash_async_exit_tfm(struct crypto_tfm *tfm) -{ - struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); - - cryptd_free_ahash(ctx->cryptd_tfm); -} - -static struct ahash_alg ghash_async_alg = { - .init = ghash_async_init, - .update = ghash_async_update, - .final = ghash_async_final, - .setkey = ghash_async_setkey, - .digest = ghash_async_digest, - .import = ghash_async_import, - .export = ghash_async_export, - .halg.digestsize = GHASH_DIGEST_SIZE, - .halg.statesize = sizeof(struct ghash_desc_ctx), - .halg.base = { - .cra_name = "ghash", - .cra_driver_name = "ghash-ce", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_ASYNC, - .cra_blocksize = GHASH_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct ghash_async_ctx), - .cra_module = THIS_MODULE, - .cra_init = ghash_async_init_tfm, - .cra_exit = ghash_async_exit_tfm, - }, -}; - - void pmull_gcm_encrypt(int blocks, u64 dg[], const char *src, struct gcm_key const *k, char *dst, const char *iv, int rounds, u32 counter); @@ -459,17 +284,11 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len) scatterwalk_start(&walk, req->src); do { - u32 n = scatterwalk_clamp(&walk, len); - u8 *p; - - if (!n) { - scatterwalk_start(&walk, sg_next(walk.sg)); - n = scatterwalk_clamp(&walk, len); - } + unsigned int n; - p = scatterwalk_map(&walk); - gcm_update_mac(dg, p, n, buf, &buf_count, ctx); - scatterwalk_unmap(p); + n = scatterwalk_next(&walk, len); + gcm_update_mac(dg, walk.addr, n, buf, &buf_count, ctx); + scatterwalk_done_src(&walk, n); if (unlikely(len / SZ_4K > (len - n) / SZ_4K)) { kernel_neon_end(); @@ -477,8 +296,6 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len) } len -= n; - scatterwalk_advance(&walk, n); - scatterwalk_done(&walk, 0, len); } while (len); if (buf_count) { @@ -767,14 +584,9 @@ static int __init ghash_ce_mod_init(void) err = crypto_register_shash(&ghash_alg); if (err) goto err_aead; - err = crypto_register_ahash(&ghash_async_alg); - if (err) - goto err_shash; return 0; -err_shash: - crypto_unregister_shash(&ghash_alg); err_aead: if (elf_hwcap2 & HWCAP2_PMULL) crypto_unregister_aeads(gcm_aes_algs, @@ -784,7 +596,6 @@ err_aead: static void __exit ghash_ce_mod_exit(void) { - crypto_unregister_ahash(&ghash_async_alg); crypto_unregister_shash(&ghash_alg); if (elf_hwcap2 & HWCAP2_PMULL) crypto_unregister_aeads(gcm_aes_algs, diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c index c31bd8f7c092..4464ffbf8fd1 100644 --- a/arch/arm/crypto/poly1305-glue.c +++ b/arch/arm/crypto/poly1305-glue.c @@ -8,7 +8,7 @@ #include <asm/hwcap.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <crypto/algapi.h> #include <crypto/internal/hash.h> #include <crypto/internal/poly1305.h> @@ -267,6 +267,7 @@ static void __exit arm_poly1305_mod_exit(void) module_init(arm_poly1305_mod_init); module_exit(arm_poly1305_mod_exit); +MODULE_DESCRIPTION("Accelerated Poly1305 transform for ARM"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS_CRYPTO("poly1305"); MODULE_ALIAS_CRYPTO("poly1305-arm"); diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c index c62ce89dd3e0..aeac45bfbf9f 100644 --- a/arch/arm/crypto/sha2-ce-glue.c +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -16,7 +16,7 @@ #include <asm/hwcap.h> #include <asm/simd.h> #include <asm/neon.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "sha256_glue.h" diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h index a41b503b7dcd..2ec0e5e83fc9 100644 --- a/arch/arm/include/asm/arm_pmuv3.h +++ b/arch/arm/include/asm/arm_pmuv3.h @@ -127,6 +127,12 @@ static inline u32 read_pmuver(void) return (dfr0 >> 24) & 0xf; } +static inline bool pmuv3_has_icntr(void) +{ + /* FEAT_PMUv3_ICNTR not accessible for 32-bit */ + return false; +} + static inline void write_pmcr(u32 val) { write_sysreg(val, PMCR); @@ -152,6 +158,13 @@ static inline u64 read_pmccntr(void) return read_sysreg(PMCCNTR); } +static inline void write_pmicntr(u64 val) {} + +static inline u64 read_pmicntr(void) +{ + return 0; +} + static inline void write_pmcntenset(u32 val) { write_sysreg(val, PMCNTENSET); @@ -177,6 +190,13 @@ static inline void write_pmccfiltr(u32 val) write_sysreg(val, PMCCFILTR); } +static inline void write_pmicfiltr(u64 val) {} + +static inline u64 read_pmicfiltr(void) +{ + return 0; +} + static inline void write_pmovsclr(u32 val) { write_sysreg(val, PMOVSR); @@ -192,6 +212,8 @@ static inline void write_pmuserenr(u32 val) write_sysreg(val, PMUSERENR); } +static inline void write_pmuacr(u64 val) {} + static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {} static inline void kvm_clr_pmu_events(u32 clr) {} static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr) @@ -211,6 +233,7 @@ static inline void kvm_vcpu_pmu_resync_el0(void) {} #define ARMV8_PMU_DFR_VER_V3P1 0x4 #define ARMV8_PMU_DFR_VER_V3P4 0x5 #define ARMV8_PMU_DFR_VER_V3P5 0x6 +#define ARMV8_PMU_DFR_VER_V3P9 0x9 #define ARMV8_PMU_DFR_VER_IMP_DEF 0xF static inline bool pmuv3_implemented(int pmuver) @@ -229,6 +252,11 @@ static inline bool is_pmuv3p5(int pmuver) return pmuver >= ARMV8_PMU_DFR_VER_V3P5; } +static inline bool is_pmuv3p9(int pmuver) +{ + return pmuver >= ARMV8_PMU_DFR_VER_V3P9; +} + static inline u64 read_pmceid0(void) { u64 val = read_sysreg(PMCEID0); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index aebe2c8f6a68..d33c1e24e00b 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -21,6 +21,7 @@ #include <asm/opcodes-virt.h> #include <asm/asm-offsets.h> #include <asm/page.h> +#include <asm/pgtable.h> #include <asm/thread_info.h> #include <asm/uaccess-asm.h> diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h index e3ea34558ada..ecbc100d22a5 100644 --- a/arch/arm/include/asm/cache.h +++ b/arch/arm/include/asm/cache.h @@ -26,4 +26,10 @@ #define __read_mostly __section(".data..read_mostly") +#ifndef __ASSEMBLY__ +#ifdef CONFIG_ARCH_HAS_CACHE_LINE_SIZE +int cache_line_size(void); +#endif +#endif + #endif diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 1075534b0a2e..8ed8b9a24efe 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -283,7 +283,7 @@ void flush_cache_pages(struct vm_area_struct *vma, unsigned long user_addr, * flush_dcache_page is used when the kernel has written to the page * cache page at virtual address page->virtual. * - * If this page isn't mapped (ie, page_mapping == NULL), or it might + * If this page isn't mapped (ie, folio_mapping == NULL), or it might * have userspace mappings, then we _must_ always clean + invalidate * the dcache entries associated with the kernel mapping. * diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h index b9dbe1d4c8fe..b01c59076b84 100644 --- a/arch/arm/include/asm/cachetype.h +++ b/arch/arm/include/asm/cachetype.h @@ -83,6 +83,14 @@ static inline unsigned int read_ccsidr(void) asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (val)); return val; } + +static inline unsigned int read_clidr(void) +{ + unsigned int val; + + asm volatile("mrc p15, 1, %0, c0, c0, 1" : "=r" (val)); + return val; +} #else /* CONFIG_CPU_V7M */ #include <linux/io.h> #include "asm/v7m.h" @@ -96,6 +104,11 @@ static inline unsigned int read_ccsidr(void) { return readl(BASEADDR_V7M_SCB + V7M_SCB_CCSIDR); } + +static inline unsigned int read_clidr(void) +{ + return readl(BASEADDR_V7M_SCB + V7M_SCB_CLIDR); +} #endif #endif diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 44667bdb4707..9beb64d30586 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -5,6 +5,7 @@ #include <linux/irqflags.h> #include <linux/prefetch.h> #include <asm/barrier.h> +#include <linux/cmpxchg-emu.h> #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) /* @@ -162,7 +163,11 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, prefetchw((const void *)ptr); switch (size) { -#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ +#ifdef CONFIG_CPU_V6 /* ARCH == ARMv6 */ + case 1: + oldval = cmpxchg_emu_u8((volatile u8 *)ptr, old, new); + break; +#else /* min ARCH > ARMv6 */ case 1: do { asm volatile("@ __cmpxchg1\n" diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h index bd6fdb4b922d..9d8863537aa5 100644 --- a/arch/arm/include/asm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -11,7 +11,6 @@ #include <linux/cpu.h> struct cpuinfo_arm { - struct cpu cpu; u32 cpuid; #ifdef CONFIG_SMP unsigned int loops_per_jiffy; diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index 4b69cf850451..d3ef8e416b27 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -52,10 +52,17 @@ static inline uint32_t __div64_32(uint64_t *n, uint32_t base) #else -static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) +#ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE +static __always_inline +#else +static inline +#endif +uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) { unsigned long long res; register unsigned int tmp asm("ip") = 0; + bool no_ovf = __builtin_constant_p(m) && + ((m >> 32) + (m & 0xffffffff) < 0x100000000); if (!bias) { asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" @@ -63,7 +70,7 @@ static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) : "=&r" (res) : "r" (m), "r" (n) : "cc"); - } else if (!(m & ((1ULL << 63) | (1ULL << 31)))) { + } else if (no_ovf) { res = m; asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" "mov %Q0, #0" @@ -80,7 +87,7 @@ static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) : "cc"); } - if (!(m & ((1ULL << 63) | (1ULL << 31)))) { + if (no_ovf) { asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" "umlal %R0, %Q0, %Q1, %R2\n\t" "mov %R0, #0\n\t" diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 82ec1ccf1fee..2ce4c5683e6d 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -24,7 +24,7 @@ struct dma_iommu_mapping { }; struct dma_iommu_mapping * -arm_iommu_create_mapping(const struct bus_type *bus, dma_addr_t base, u64 size); +arm_iommu_create_mapping(struct device *dev, dma_addr_t base, u64 size); void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping); diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h index 4befe8d2ae19..7cbe001bf9cc 100644 --- a/arch/arm/include/asm/ecard.h +++ b/arch/arm/include/asm/ecard.h @@ -195,7 +195,7 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, unsigned long offset, unsigned long maxsize); #define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr) -extern struct bus_type ecard_bus_type; +extern const struct bus_type ecard_bus_type; #define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev) diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h index 78282ced5038..e408399d5f0e 100644 --- a/arch/arm/include/asm/efi.h +++ b/arch/arm/include/asm/efi.h @@ -14,6 +14,7 @@ #include <asm/mach/map.h> #include <asm/mmu_context.h> #include <asm/ptrace.h> +#include <asm/uaccess.h> #ifdef CONFIG_EFI void efi_init(void); @@ -25,6 +26,18 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md, boo #define arch_efi_call_virt_setup() efi_virtmap_load() #define arch_efi_call_virt_teardown() efi_virtmap_unload() +#ifdef CONFIG_CPU_TTBR0_PAN +#undef arch_efi_call_virt +#define arch_efi_call_virt(p, f, args...) ({ \ + unsigned int flags = uaccess_save_and_enable(); \ + efi_status_t res = _Generic((p)->f(args), \ + efi_status_t: (p)->f(args), \ + default: ((p)->f(args), EFI_ABORTED)); \ + uaccess_restore(flags); \ + res; \ +}) +#endif + #define ARCH_EFI_IRQ_FLAGS_MASK \ (PSR_J_BIT | PSR_E_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | \ PSR_T_BIT | MODE_MASK) diff --git a/arch/arm/include/asm/fb.h b/arch/arm/include/asm/fb.h deleted file mode 100644 index ce20a43c3033..000000000000 --- a/arch/arm/include/asm/fb.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include <asm-generic/fb.h> - -#endif /* _ASM_FB_H_ */ diff --git a/arch/arm/include/asm/fpu.h b/arch/arm/include/asm/fpu.h new file mode 100644 index 000000000000..2ae50bdce59b --- /dev/null +++ b/arch/arm/include/asm/fpu.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2023 SiFive + */ + +#ifndef __ASM_FPU_H +#define __ASM_FPU_H + +#include <asm/neon.h> + +#define kernel_fpu_available() cpu_has_neon() +#define kernel_fpu_begin() kernel_neon_begin() +#define kernel_fpu_end() kernel_neon_end() + +#endif /* ! __ASM_FPU_H */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index 724f8dac1e5b..4186fbf7341f 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -118,6 +118,10 @@ # define MULTI_CACHE 1 #endif +#ifdef CONFIG_CPU_CACHE_NOP +# define MULTI_CACHE 1 +#endif + #if defined(CONFIG_CPU_V7M) # define MULTI_CACHE 1 #endif @@ -126,29 +130,15 @@ #error Unknown cache maintenance model #endif -#ifndef __ASSEMBLER__ -static inline void nop_flush_icache_all(void) { } -static inline void nop_flush_kern_cache_all(void) { } -static inline void nop_flush_kern_cache_louis(void) { } -static inline void nop_flush_user_cache_all(void) { } -static inline void nop_flush_user_cache_range(unsigned long a, - unsigned long b, unsigned int c) { } - -static inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { } -static inline int nop_coherent_user_range(unsigned long a, - unsigned long b) { return 0; } -static inline void nop_flush_kern_dcache_area(void *a, size_t s) { } - -static inline void nop_dma_flush_range(const void *a, const void *b) { } - -static inline void nop_dma_map_area(const void *s, size_t l, int f) { } -static inline void nop_dma_unmap_area(const void *s, size_t l, int f) { } -#endif - #ifndef MULTI_CACHE #define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) #define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) +/* This function only has a dedicated assembly callback on the v7 cache */ +#ifdef CONFIG_CPU_CACHE_V7 #define __cpuc_flush_kern_louis __glue(_CACHE,_flush_kern_cache_louis) +#else +#define __cpuc_flush_kern_louis __glue(_CACHE,_flush_kern_cache_all) +#endif #define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h index 9fd9ad5d9202..3190e1e5067a 100644 --- a/arch/arm/include/asm/hardware/locomo.h +++ b/arch/arm/include/asm/hardware/locomo.h @@ -189,7 +189,7 @@ struct locomo_driver { void (*remove)(struct locomo_dev *); }; -#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) +#define LOCOMO_DRV(_d) container_of_const((_d), struct locomo_driver, drv) #define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name) diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index d8c6f8a99dfa..a815f39b4243 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -404,7 +404,7 @@ struct sa1111_driver { void (*remove)(struct sa1111_dev *); }; -#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) +#define SA1111_DRV(_d) container_of_const((_d), struct sa1111_driver, drv) #define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) diff --git a/arch/arm/include/asm/hugetlb-3level.h b/arch/arm/include/asm/hugetlb-3level.h index a30be5505793..87d48e2d90ad 100644 --- a/arch/arm/include/asm/hugetlb-3level.h +++ b/arch/arm/include/asm/hugetlb-3level.h @@ -13,12 +13,12 @@ /* * If our huge pte is non-zero then mark the valid bit. - * This allows pte_present(huge_ptep_get(ptep)) to return true for non-zero + * This allows pte_present(huge_ptep_get(mm,addr,ptep)) to return true for non-zero * ptes. * (The valid bit is automatically cleared by set_pte_at for PROT_NONE ptes). */ #define __HAVE_ARCH_HUGE_PTEP_GET -static inline pte_t huge_ptep_get(pte_t *ptep) +static inline pte_t huge_ptep_get(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t retval = *ptep; if (pte_val(retval)) diff --git a/arch/arm/include/asm/hugetlb.h b/arch/arm/include/asm/hugetlb.h index a3a82b7158d4..b766c4b373f6 100644 --- a/arch/arm/include/asm/hugetlb.h +++ b/arch/arm/include/asm/hugetlb.h @@ -15,10 +15,10 @@ #include <asm/hugetlb-3level.h> #include <asm-generic/hugetlb.h> -static inline void arch_clear_hugepage_flags(struct page *page) +static inline void arch_clear_hugetlb_flags(struct folio *folio) { - clear_bit(PG_dcache_clean, &page->flags); + clear_bit(PG_dcache_clean, &folio->flags); } -#define arch_clear_hugepage_flags arch_clear_hugepage_flags +#define arch_clear_hugetlb_flags arch_clear_hugetlb_flags #endif /* _ASM_ARM_HUGETLB_H */ diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index 62358d3ca0a8..e7f9961c53b2 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -84,6 +84,7 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_DSCR_MOE(x) ((x >> 2) & 0xf) #define ARM_ENTRY_BREAKPOINT 0x1 #define ARM_ENTRY_ASYNC_WATCHPOINT 0x2 +#define ARM_ENTRY_CFI_BREAKPOINT 0x3 #define ARM_ENTRY_SYNC_WATCHPOINT 0xa /* DSCR monitor/halting bits. */ diff --git a/arch/arm/include/asm/hypervisor.h b/arch/arm/include/asm/hypervisor.h index bd61502b9715..8a648e506540 100644 --- a/arch/arm/include/asm/hypervisor.h +++ b/arch/arm/include/asm/hypervisor.h @@ -7,4 +7,6 @@ void kvm_init_hyp_services(void); bool kvm_arm_hyp_service_available(u32 func_id); +static inline void kvm_arch_init_hyp_services(void) { }; + #endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 1815748f5d2a..bae5edf348ef 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -381,7 +381,7 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size); void iounmap(volatile void __iomem *io_addr); #define iounmap iounmap -void *arch_memremap_wb(phys_addr_t phys_addr, size_t size); +void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags); #define arch_memremap_wb arch_memremap_wb /* diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index e4eb54f6cd9f..a35aba7f548c 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -9,13 +9,17 @@ #define JUMP_LABEL_NOP_SIZE 4 +/* This macro is also expanded on the Rust side. */ +#define ARCH_STATIC_BRANCH_ASM(key, label) \ + "1:\n\t" \ + WASM(nop) "\n\t" \ + ".pushsection __jump_table, \"aw\"\n\t" \ + ".word 1b, " label ", " key "\n\t" \ + ".popsection\n\t" \ + static __always_inline bool arch_static_branch(struct static_key *key, bool branch) { - asm goto("1:\n\t" - WASM(nop) "\n\t" - ".pushsection __jump_table, \"aw\"\n\t" - ".word 1b, %l[l_yes], %c0\n\t" - ".popsection\n\t" + asm goto(ARCH_STATIC_BRANCH_ASM("%c0", "%l[l_yes]") : : "i" (&((char *)key)[branch]) : : l_yes); return false; diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index ef2aa79ece5a..7c2fa7dcec6d 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -148,12 +148,6 @@ extern unsigned long vectors_base; #endif /* - * Convert a page to/from a physical address - */ -#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page))) -#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys))) - -/* * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical * memory. This is used for XIP and NoMMU kernels, and on platforms that don't * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 62af9f7f9e96..ef11b721230e 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -7,10 +7,7 @@ #ifndef _ASMARM_PAGE_H #define _ASMARM_PAGE_H -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT CONFIG_PAGE_SHIFT -#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#include <vdso/page.h> #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index bdbc1e590891..c08f16f2e243 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -8,13 +8,6 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -#ifdef CONFIG_PERF_EVENTS -struct pt_regs; -extern unsigned long perf_instruction_pointer(struct pt_regs *regs); -extern unsigned long perf_misc_flags(struct pt_regs *regs); -#define perf_misc_flags(regs) perf_misc_flags(regs) -#endif - #define perf_arch_fetch_caller_regs(regs, __ip) { \ (regs)->ARM_pc = (__ip); \ frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index b0a262566eb9..6b5392e20f41 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -213,8 +213,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) #define pmd_pfn(pmd) (__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) -#define pmd_leaf(pmd) (pmd_val(pmd) & 2) -#define pmd_bad(pmd) (pmd_val(pmd) & 2) +#define pmd_leaf(pmd) (pmd_val(pmd) & PMD_TYPE_SECT) +#define pmd_bad(pmd) pmd_leaf(pmd) #define pmd_present(pmd) (pmd_val(pmd)) #define copy_pmd(pmdpd,pmdps) \ @@ -241,7 +241,6 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) * define empty stubs for use by pin_page_for_write. */ #define pmd_hugewillfault(pmd) (0) -#define pmd_thp_or_huge(pmd) (0) #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index 2f35b4eddaa8..944fc9955528 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -14,6 +14,7 @@ * + Level 1/2 descriptor * - common */ +#define PUD_TABLE_BIT (_AT(pmdval_t, 1) << 1) #define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0) #define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) #define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0) @@ -74,6 +75,7 @@ #define PHYS_MASK_SHIFT (40) #define PHYS_MASK ((1ULL << PHYS_MASK_SHIFT) - 1) +#ifndef CONFIG_CPU_TTBR0_PAN /* * TTBR0/TTBR1 split (PAGE_OFFSET): * 0x40000000: T0SZ = 2, T1SZ = 0 (not used) @@ -93,5 +95,35 @@ #endif #define TTBR1_SIZE (((PAGE_OFFSET >> 30) - 1) << 16) +#else +/* + * With CONFIG_CPU_TTBR0_PAN enabled, TTBR1 is only used during uaccess + * disabled regions when TTBR0 is disabled. + */ +#define TTBR1_OFFSET 0 /* pointing to swapper_pg_dir */ +#define TTBR1_SIZE 0 /* TTBR1 size controlled via TTBCR.T0SZ */ +#endif + +/* + * TTBCR register bits. + * + * The ORGN0 and IRGN0 bits enables different forms of caching when + * walking the translation table. Clearing these bits (which is claimed + * to be the reset default) means "normal memory, [outer|inner] + * non-cacheable" + */ +#define TTBCR_EAE (1 << 31) +#define TTBCR_IMP (1 << 30) +#define TTBCR_SH1_MASK (3 << 28) +#define TTBCR_ORGN1_MASK (3 << 26) +#define TTBCR_IRGN1_MASK (3 << 24) +#define TTBCR_EPD1 (1 << 23) +#define TTBCR_A1 (1 << 22) +#define TTBCR_T1SZ_MASK (7 << 16) +#define TTBCR_SH0_MASK (3 << 12) +#define TTBCR_ORGN0_MASK (3 << 10) +#define TTBCR_IRGN0_MASK (3 << 8) +#define TTBCR_EPD0 (1 << 7) +#define TTBCR_T0SZ_MASK (7 << 0) #endif diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 4b1d9eb3908a..fa5939eb9864 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -112,7 +112,7 @@ #ifndef __ASSEMBLY__ #define pud_none(pud) (!pud_val(pud)) -#define pud_bad(pud) (!(pud_val(pud) & 2)) +#define pud_bad(pud) (!(pud_val(pud) & PUD_TABLE_BIT)) #define pud_present(pud) (pud_val(pud)) #define pmd_table(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \ PMD_TYPE_TABLE) @@ -137,7 +137,7 @@ static inline pmd_t *pud_pgtable(pud_t pud) return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK); } -#define pmd_bad(pmd) (!(pmd_val(pmd) & 2)) +#define pmd_bad(pmd) (!(pmd_val(pmd) & PMD_TABLE_BIT)) #define copy_pmd(pmdpd,pmdps) \ do { \ @@ -190,7 +190,6 @@ static inline pte_t pte_mkspecial(pte_t pte) #define pmd_dirty(pmd) (pmd_isset((pmd), L_PMD_SECT_DIRTY)) #define pmd_hugewillfault(pmd) (!pmd_young(pmd) || !pmd_write(pmd)) -#define pmd_thp_or_huge(pmd) (pmd_huge(pmd) || pmd_trans_huge(pmd)) #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define pmd_trans_huge(pmd) (pmd_val(pmd) && !pmd_table(pmd)) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index be91e376df79..6b986ef6042f 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -19,14 +19,13 @@ extern struct page *empty_zero_page; #define ZERO_PAGE(vaddr) (empty_zero_page) #endif -#ifndef CONFIG_MMU - #include <asm-generic/pgtable-nopud.h> + +#ifndef CONFIG_MMU #include <asm/pgtable-nommu.h> #else -#include <asm-generic/pgtable-nopud.h> #include <asm/page.h> #include <asm/pgtable-hwdef.h> diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 280396483f5d..b4986a23d852 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -178,6 +178,18 @@ extern void cpu_resume(void); }) #endif +static inline unsigned int cpu_get_ttbcr(void) +{ + unsigned int ttbcr; + asm("mrc p15, 0, %0, c2, c0, 2" : "=r" (ttbcr)); + return ttbcr; +} + +static inline void cpu_set_ttbcr(unsigned int ttbcr) +{ + asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr) : "memory"); +} + #else /*!CONFIG_MMU */ #define cpu_switch_mm(pgd,mm) { } diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 14a38cc67e0b..6eb311fb2da0 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -20,6 +20,7 @@ struct pt_regs { struct svc_pt_regs { struct pt_regs regs; u32 dacr; + u32 ttbcr; }; #define to_svc_pt_regs(r) container_of(r, struct svc_pt_regs, regs) diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h index 0c14b36ef101..5404a2a96bf3 100644 --- a/arch/arm/include/asm/spinlock_types.h +++ b/arch/arm/include/asm/spinlock_types.h @@ -3,7 +3,7 @@ #define __ASM_SPINLOCK_TYPES_H #ifndef __LINUX_SPINLOCK_TYPES_RAW_H -# error "please don't include this file directly" +# error "Please do not include this file directly." #endif #define TICKET_SHIFT 16 diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h index 360f0d2406bf..f80a85b091d6 100644 --- a/arch/arm/include/asm/stacktrace.h +++ b/arch/arm/include/asm/stacktrace.h @@ -26,6 +26,13 @@ struct stackframe { #endif }; +static inline bool on_thread_stack(void) +{ + unsigned long delta = current_stack_pointer ^ (unsigned long)current->stack; + + return delta < THREAD_SIZE; +} + static __always_inline void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame) { diff --git a/arch/arm/include/asm/patch.h b/arch/arm/include/asm/text-patching.h index 0b48247c4600..0b48247c4600 100644 --- a/arch/arm/include/asm/patch.h +++ b/arch/arm/include/asm/text-patching.h diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index f40d06ad5d2a..ea4fbe7b17f6 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -26,14 +26,7 @@ #else /* !CONFIG_MMU */ -#include <linux/swap.h> #include <asm/tlbflush.h> - -static inline void __tlb_remove_table(void *_table) -{ - free_page_and_swap_cache((struct page *)_table); -} - #include <asm-generic/tlb.h> static inline void @@ -41,8 +34,6 @@ __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { struct ptdesc *ptdesc = page_ptdesc(pte); - pagetable_pte_dtor(ptdesc); - #ifndef CONFIG_ARM_LPAE /* * With the classic ARM MMU, a pte page has two corresponding pmd @@ -61,7 +52,6 @@ __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr) #ifdef CONFIG_ARM_LPAE struct ptdesc *ptdesc = virt_to_ptdesc(pmdp); - pagetable_pmd_dtor(ptdesc); tlb_remove_ptdesc(tlb, ptdesc); #endif } diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index 853c4f81ba4a..ad36b6570067 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -22,9 +22,9 @@ /* Enable topology flag updates */ #define arch_update_cpu_topology topology_update_cpu_topology -/* Replace task scheduler's default thermal pressure API */ -#define arch_scale_thermal_pressure topology_get_thermal_pressure -#define arch_update_thermal_pressure topology_update_thermal_pressure +/* Replace task scheduler's default HW pressure API */ +#define arch_scale_hw_pressure topology_get_hw_pressure +#define arch_update_hw_pressure topology_update_hw_pressure #else diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h index 65da32e1f1c1..4bccd895d954 100644 --- a/arch/arm/include/asm/uaccess-asm.h +++ b/arch/arm/include/asm/uaccess-asm.h @@ -39,8 +39,9 @@ #endif .endm +#if defined(CONFIG_CPU_SW_DOMAIN_PAN) + .macro uaccess_disable, tmp, isb=1 -#ifdef CONFIG_CPU_SW_DOMAIN_PAN /* * Whenever we re-enter userspace, the domains should always be * set appropriately. @@ -50,11 +51,9 @@ .if \isb instr_sync .endif -#endif .endm .macro uaccess_enable, tmp, isb=1 -#ifdef CONFIG_CPU_SW_DOMAIN_PAN /* * Whenever we re-enter userspace, the domains should always be * set appropriately. @@ -64,15 +63,61 @@ .if \isb instr_sync .endif -#endif .endm +#elif defined(CONFIG_CPU_TTBR0_PAN) + + .macro uaccess_disable, tmp, isb=1 + /* + * Disable TTBR0 page table walks (EDP0 = 1), use the reserved ASID + * from TTBR1 (A1 = 1) and enable TTBR1 page table walks for kernel + * addresses by reducing TTBR0 range to 32MB (T0SZ = 7). + */ + mrc p15, 0, \tmp, c2, c0, 2 @ read TTBCR + orr \tmp, \tmp, #TTBCR_EPD0 | TTBCR_T0SZ_MASK + orr \tmp, \tmp, #TTBCR_A1 + mcr p15, 0, \tmp, c2, c0, 2 @ write TTBCR + .if \isb + instr_sync + .endif + .endm + + .macro uaccess_enable, tmp, isb=1 + /* + * Enable TTBR0 page table walks (T0SZ = 0, EDP0 = 0) and ASID from + * TTBR0 (A1 = 0). + */ + mrc p15, 0, \tmp, c2, c0, 2 @ read TTBCR + bic \tmp, \tmp, #TTBCR_EPD0 | TTBCR_T0SZ_MASK + bic \tmp, \tmp, #TTBCR_A1 + mcr p15, 0, \tmp, c2, c0, 2 @ write TTBCR + .if \isb + instr_sync + .endif + .endm + +#else + + .macro uaccess_disable, tmp, isb=1 + .endm + + .macro uaccess_enable, tmp, isb=1 + .endm + +#endif + #if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS) #define DACR(x...) x #else #define DACR(x...) #endif +#ifdef CONFIG_CPU_TTBR0_PAN +#define PAN(x...) x +#else +#define PAN(x...) +#endif + /* * Save the address limit on entry to a privileged exception. * @@ -86,6 +131,8 @@ .macro uaccess_entry, tsk, tmp0, tmp1, tmp2, disable DACR( mrc p15, 0, \tmp0, c3, c0, 0) DACR( str \tmp0, [sp, #SVC_DACR]) + PAN( mrc p15, 0, \tmp0, c2, c0, 2) + PAN( str \tmp0, [sp, #SVC_TTBCR]) .if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN) /* kernel=client, user=no access */ mov \tmp2, #DACR_UACCESS_DISABLE @@ -104,8 +151,11 @@ .macro uaccess_exit, tsk, tmp0, tmp1 DACR( ldr \tmp0, [sp, #SVC_DACR]) DACR( mcr p15, 0, \tmp0, c3, c0, 0) + PAN( ldr \tmp0, [sp, #SVC_TTBCR]) + PAN( mcr p15, 0, \tmp0, c2, c0, 2) .endm #undef DACR +#undef PAN #endif /* __ASM_UACCESS_ASM_H__ */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 9556d04387f7..f90be312418e 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -12,8 +12,10 @@ #include <linux/string.h> #include <asm/page.h> #include <asm/domain.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <asm/unified.h> +#include <asm/pgtable.h> +#include <asm/proc-fns.h> #include <asm/compiler.h> #include <asm/extable.h> @@ -24,9 +26,10 @@ * perform such accesses (eg, via list poison values) which could then * be exploited for priviledge escalation. */ +#if defined(CONFIG_CPU_SW_DOMAIN_PAN) + static __always_inline unsigned int uaccess_save_and_enable(void) { -#ifdef CONFIG_CPU_SW_DOMAIN_PAN unsigned int old_domain = get_domain(); /* Set the current domain access to permit user accesses */ @@ -34,19 +37,49 @@ static __always_inline unsigned int uaccess_save_and_enable(void) domain_val(DOMAIN_USER, DOMAIN_CLIENT)); return old_domain; -#else - return 0; -#endif } static __always_inline void uaccess_restore(unsigned int flags) { -#ifdef CONFIG_CPU_SW_DOMAIN_PAN /* Restore the user access mask */ set_domain(flags); -#endif } +#elif defined(CONFIG_CPU_TTBR0_PAN) + +static __always_inline unsigned int uaccess_save_and_enable(void) +{ + unsigned int old_ttbcr = cpu_get_ttbcr(); + + /* + * Enable TTBR0 page table walks (T0SZ = 0, EDP0 = 0) and ASID from + * TTBR0 (A1 = 0). + */ + cpu_set_ttbcr(old_ttbcr & ~(TTBCR_A1 | TTBCR_EPD0 | TTBCR_T0SZ_MASK)); + isb(); + + return old_ttbcr; +} + +static inline void uaccess_restore(unsigned int flags) +{ + cpu_set_ttbcr(flags); + isb(); +} + +#else + +static inline unsigned int uaccess_save_and_enable(void) +{ + return 0; +} + +static inline void uaccess_restore(unsigned int flags) +{ +} + +#endif + /* * These two are intentionally not defined anywhere - if the kernel * code generates any references to them, that's a bug. diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 3676e82cf95c..9fb00973c608 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -37,7 +37,6 @@ #define __ARCH_WANT_SYS_FORK #define __ARCH_WANT_SYS_VFORK #define __ARCH_WANT_SYS_CLONE -#define __ARCH_WANT_SYS_CLONE3 /* * Unimplemented (or alternatively implemented) syscalls diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h index 5b85889f82ee..88364a6727ff 100644 --- a/arch/arm/include/asm/vdso.h +++ b/arch/arm/include/asm/vdso.h @@ -4,6 +4,8 @@ #ifdef __KERNEL__ +#define __VDSO_PAGES 4 + #ifndef __ASSEMBLY__ struct mm_struct; diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h index 2134cbd5469f..1e9f81639c88 100644 --- a/arch/arm/include/asm/vdso/gettimeofday.h +++ b/arch/arm/include/asm/vdso/gettimeofday.h @@ -15,8 +15,6 @@ #define VDSO_HAS_CLOCK_GETRES 1 -extern struct vdso_data *__get_datapage(void); - static __always_inline int gettimeofday_fallback( struct __kernel_old_timeval *_tv, struct timezone *_tz) @@ -114,7 +112,7 @@ static inline bool arm_vdso_hres_capable(void) #define __arch_vdso_hres_capable arm_vdso_hres_capable static __always_inline u64 __arch_get_hw_counter(int clock_mode, - const struct vdso_data *vd) + const struct vdso_time_data *vd) { #ifdef CONFIG_ARM_ARCH_TIMER u64 cycle_now; @@ -137,11 +135,6 @@ static __always_inline u64 __arch_get_hw_counter(int clock_mode, #endif } -static __always_inline const struct vdso_data *__arch_get_vdso_data(void) -{ - return __get_datapage(); -} - #endif /* !__ASSEMBLY__ */ #endif /* __ASM_VDSO_GETTIMEOFDAY_H */ diff --git a/arch/arm/include/asm/vdso/vsyscall.h b/arch/arm/include/asm/vdso/vsyscall.h index 47e41ae8ccd0..4e7226ad02ec 100644 --- a/arch/arm/include/asm/vdso/vsyscall.h +++ b/arch/arm/include/asm/vdso/vsyscall.h @@ -4,29 +4,17 @@ #ifndef __ASSEMBLY__ -#include <linux/timekeeper_internal.h> #include <vdso/datapage.h> #include <asm/cacheflush.h> -extern struct vdso_data *vdso_data; extern bool cntvct_ok; -/* - * Update the vDSO data page to keep in sync with kernel timekeeping. - */ static __always_inline -struct vdso_data *__arm_get_k_vdso_data(void) -{ - return vdso_data; -} -#define __arch_get_k_vdso_data __arm_get_k_vdso_data - -static __always_inline -void __arm_sync_vdso_data(struct vdso_data *vdata) +void __arch_sync_vdso_time_data(struct vdso_time_data *vdata) { flush_dcache_page(virt_to_page(vdata)); } -#define __arch_sync_vdso_data __arm_sync_vdso_data +#define __arch_sync_vdso_time_data __arch_sync_vdso_time_data /* The asm-generic header needs to be included after the definitions above */ #include <asm-generic/vdso/vsyscall.h> diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h index 157ea3426158..85ccc422d4d0 100644 --- a/arch/arm/include/asm/vfp.h +++ b/arch/arm/include/asm/vfp.h @@ -9,16 +9,6 @@ #ifndef __ASM_VFP_H #define __ASM_VFP_H -#ifndef CONFIG_AS_VFP_VMRS_FPINST -#define FPSID cr0 -#define FPSCR cr1 -#define MVFR1 cr6 -#define MVFR0 cr7 -#define FPEXC cr8 -#define FPINST cr9 -#define FPINST2 cr10 -#endif - /* FPSID bits */ #define FPSID_IMPLEMENTER_BIT (24) #define FPSID_IMPLEMENTER_MASK (0xff << FPSID_IMPLEMENTER_BIT) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index ba0d4cb5377e..e2e1d5a3727a 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -8,7 +8,6 @@ #include <asm/vfp.h> -#ifdef CONFIG_AS_VFP_VMRS_FPINST .macro VFPFMRX, rd, sysreg, cond vmrs\cond \rd, \sysreg .endm @@ -16,16 +15,6 @@ .macro VFPFMXR, sysreg, rd, cond vmsr\cond \sysreg, \rd .endm -#else - @ Macros to allow building with old toolkits (with no VFP support) - .macro VFPFMRX, rd, sysreg, cond - MRC\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMRX \rd, \sysreg - .endm - - .macro VFPFMXR, sysreg, rd, cond - MCR\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMXR \sysreg, \rd - .endm -#endif @ read all the working registers back into the VFP .macro VFPFLDMIA, base, tmp diff --git a/arch/arm/include/asm/vmlinux.lds.h b/arch/arm/include/asm/vmlinux.lds.h index 4c8632d5c432..0341973e30e1 100644 --- a/arch/arm/include/asm/vmlinux.lds.h +++ b/arch/arm/include/asm/vmlinux.lds.h @@ -19,7 +19,7 @@ #endif #ifdef CONFIG_MMU -#define ARM_MMU_KEEP(x) x +#define ARM_MMU_KEEP(x) KEEP(x) #define ARM_MMU_DISCARD(x) #else #define ARM_MMU_KEEP(x) @@ -34,6 +34,12 @@ #define NOCROSSREFS #endif +#ifdef CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY +#define OVERLAY_KEEP(x) KEEP(x) +#else +#define OVERLAY_KEEP(x) x +#endif + /* Set start/end symbol names to the LMA for the section */ #define ARM_LMA(sym, section) \ sym##_start = LOADADDR(section); \ @@ -42,7 +48,7 @@ #define PROC_INFO \ . = ALIGN(4); \ __proc_info_begin = .; \ - *(.proc.info.init) \ + KEEP(*(.proc.info.init)) \ __proc_info_end = .; #define IDMAP_TEXT \ @@ -125,13 +131,13 @@ __vectors_lma = .; \ OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) { \ .vectors { \ - *(.vectors) \ + OVERLAY_KEEP(*(.vectors)) \ } \ .vectors.bhb.loop8 { \ - *(.vectors.bhb.loop8) \ + OVERLAY_KEEP(*(.vectors.bhb.loop8)) \ } \ .vectors.bhb.bpiall { \ - *(.vectors.bhb.bpiall) \ + OVERLAY_KEEP(*(.vectors.bhb.bpiall)) \ } \ } \ ARM_LMA(__vectors, .vectors); \ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 89a77e3f51d2..b3333d070390 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -40,6 +40,7 @@ obj-y += entry-armv.o endif obj-$(CONFIG_MMU) += bugs.o +obj-$(CONFIG_OF) += cacheinfo.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o @@ -78,8 +79,6 @@ obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_xscale.o perf_event_v6.o \ - perf_event_v7.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o obj-$(CONFIG_VDSO) += vdso.o diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 4915662842ff..123f4a8ef446 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -85,6 +85,7 @@ int main(void) DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); DEFINE(PT_REGS_SIZE, sizeof(struct pt_regs)); DEFINE(SVC_DACR, offsetof(struct svc_pt_regs, dacr)); + DEFINE(SVC_TTBCR, offsetof(struct svc_pt_regs, ttbcr)); DEFINE(SVC_REGS_SIZE, sizeof(struct svc_pt_regs)); BLANK(); DEFINE(SIGFRAME_RC3_OFFSET, offsetof(struct sigframe, retcode[3])); @@ -152,10 +153,6 @@ int main(void) DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER); DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); BLANK(); -#ifdef CONFIG_VDSO - DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store)); -#endif - BLANK(); #ifdef CONFIG_ARM_MPU DEFINE(MPU_RNG_INFO_RNGS, offsetof(struct mpu_rgn_info, rgns)); DEFINE(MPU_RNG_INFO_USED, offsetof(struct mpu_rgn_info, used)); diff --git a/arch/arm/kernel/cacheinfo.c b/arch/arm/kernel/cacheinfo.c new file mode 100644 index 000000000000..e1469b641780 --- /dev/null +++ b/arch/arm/kernel/cacheinfo.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ARM cacheinfo support + * + * Copyright (C) 2023 Linaro Ltd. + * Copyright (C) 2015 ARM Ltd. + * All Rights Reserved + */ + +#include <linux/bitfield.h> +#include <linux/cacheinfo.h> +#include <linux/of.h> + +#include <asm/cachetype.h> +#include <asm/cputype.h> +#include <asm/system_info.h> + +/* Ctypen, bits[3(n - 1) + 2 : 3(n - 1)], for n = 1 to 7 */ +#define CLIDR_CTYPE_SHIFT(level) (3 * (level - 1)) +#define CLIDR_CTYPE_MASK(level) (7 << CLIDR_CTYPE_SHIFT(level)) +#define CLIDR_CTYPE(clidr, level) \ + (((clidr) & CLIDR_CTYPE_MASK(level)) >> CLIDR_CTYPE_SHIFT(level)) + +#define MAX_CACHE_LEVEL 7 /* Max 7 level supported */ + +#define CTR_FORMAT_MASK GENMASK(31, 29) +#define CTR_FORMAT_ARMV6 0 +#define CTR_FORMAT_ARMV7 4 +#define CTR_CWG_MASK GENMASK(27, 24) +#define CTR_DSIZE_LEN_MASK GENMASK(13, 12) +#define CTR_ISIZE_LEN_MASK GENMASK(1, 0) + +/* Also valid for v7m */ +static inline int cache_line_size_cp15(void) +{ + u32 ctr = read_cpuid_cachetype(); + u32 format = FIELD_GET(CTR_FORMAT_MASK, ctr); + + if (format == CTR_FORMAT_ARMV7) { + u32 cwg = FIELD_GET(CTR_CWG_MASK, ctr); + + return cwg ? 4 << cwg : ARCH_DMA_MINALIGN; + } else if (WARN_ON_ONCE(format != CTR_FORMAT_ARMV6)) { + return ARCH_DMA_MINALIGN; + } + + return 8 << max(FIELD_GET(CTR_ISIZE_LEN_MASK, ctr), + FIELD_GET(CTR_DSIZE_LEN_MASK, ctr)); +} + +int cache_line_size(void) +{ + if (coherency_max_size != 0) + return coherency_max_size; + + /* CP15 is optional / implementation defined before ARMv6 */ + if (cpu_architecture() < CPU_ARCH_ARMv6) + return ARCH_DMA_MINALIGN; + + return cache_line_size_cp15(); +} +EXPORT_SYMBOL_GPL(cache_line_size); + +static inline enum cache_type get_cache_type(int level) +{ + u32 clidr; + + if (level > MAX_CACHE_LEVEL) + return CACHE_TYPE_NOCACHE; + + clidr = read_clidr(); + + return CLIDR_CTYPE(clidr, level); +} + +static void ci_leaf_init(struct cacheinfo *this_leaf, + enum cache_type type, unsigned int level) +{ + this_leaf->level = level; + this_leaf->type = type; +} + +static int detect_cache_level(unsigned int *level_p, unsigned int *leaves_p) +{ + unsigned int ctype, level, leaves; + u32 ctr, format; + + /* CLIDR is not present before ARMv7/v7m */ + if (cpu_architecture() < CPU_ARCH_ARMv7) + return -EOPNOTSUPP; + + /* Don't try reading CLIDR if CTR declares old format */ + ctr = read_cpuid_cachetype(); + format = FIELD_GET(CTR_FORMAT_MASK, ctr); + if (format != CTR_FORMAT_ARMV7) + return -EOPNOTSUPP; + + for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) { + ctype = get_cache_type(level); + if (ctype == CACHE_TYPE_NOCACHE) { + level--; + break; + } + /* Separate instruction and data caches */ + leaves += (ctype == CACHE_TYPE_SEPARATE) ? 2 : 1; + } + + *level_p = level; + *leaves_p = leaves; + + return 0; +} + +int early_cache_level(unsigned int cpu) +{ + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + + return detect_cache_level(&this_cpu_ci->num_levels, &this_cpu_ci->num_leaves); +} + +int init_cache_level(unsigned int cpu) +{ + unsigned int level, leaves; + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + int fw_level; + int ret; + + ret = detect_cache_level(&level, &leaves); + if (ret) + return ret; + + fw_level = of_find_last_cache_level(cpu); + + if (level < fw_level) { + /* + * some external caches not specified in CLIDR_EL1 + * the information may be available in the device tree + * only unified external caches are considered here + */ + leaves += (fw_level - level); + level = fw_level; + } + + this_cpu_ci->num_levels = level; + this_cpu_ci->num_leaves = leaves; + return 0; +} + +int populate_cache_leaves(unsigned int cpu) +{ + unsigned int level, idx; + enum cache_type type; + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + struct cacheinfo *this_leaf = this_cpu_ci->info_list; + unsigned int arch = cpu_architecture(); + + /* CLIDR is not present before ARMv7/v7m */ + if (arch < CPU_ARCH_ARMv7) + return -EOPNOTSUPP; + + for (idx = 0, level = 1; level <= this_cpu_ci->num_levels && + idx < this_cpu_ci->num_leaves; idx++, level++) { + type = get_cache_type(level); + if (type == CACHE_TYPE_SEPARATE) { + ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level); + ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level); + } else { + ci_leaf_init(this_leaf++, type, level); + } + } + + return 0; +} diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index fdb74e64206a..3b78966e750a 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -200,7 +200,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt) mdesc_best = &__mach_desc_GENERIC_DT; - if (!dt_virt || !early_init_dt_verify(dt_virt)) + if (!dt_virt || !early_init_dt_verify(dt_virt, __pa(dt_virt))) return NULL; mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 6150a716828c..ef6a657c8d13 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -25,10 +25,17 @@ #include <asm/tls.h> #include <asm/system_info.h> #include <asm/uaccess-asm.h> +#include <asm/kasan_def.h> #include "entry-header.S" #include <asm/probes.h> +#ifdef CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION +#define RELOC_TEXT_NONE .reloc .text, R_ARM_NONE, . +#else +#define RELOC_TEXT_NONE +#endif + /* * Interrupt handling. */ @@ -555,6 +562,13 @@ ENTRY(__switch_to) @ entries covering the vmalloc region. @ ldr r2, [ip] +#ifdef CONFIG_KASAN_VMALLOC + @ Also dummy read from the KASAN shadow memory for the new stack if we + @ are using KASAN + mov_l r2, KASAN_SHADOW_OFFSET + add r2, r2, ip, lsr #KASAN_SHADOW_SCALE_SHIFT + ldr r2, [r2] +#endif #endif @ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what @@ -1065,6 +1079,7 @@ vector_addrexcptn: .globl vector_fiq .section .vectors, "ax", %progbits + RELOC_TEXT_NONE W(b) vector_rst W(b) vector_und ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_swi ) @@ -1078,6 +1093,7 @@ THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_swi ) #ifdef CONFIG_HARDEN_BRANCH_HISTORY .section .vectors.bhb.loop8, "ax", %progbits + RELOC_TEXT_NONE W(b) vector_rst W(b) vector_bhb_loop8_und ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi ) @@ -1090,6 +1106,7 @@ THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi ) W(b) vector_bhb_loop8_fiq .section .vectors.bhb.bpiall, "ax", %progbits + RELOC_TEXT_NONE W(b) vector_rst W(b) vector_bhb_bpiall_und ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi ) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 5c31e9de7a60..f379c852dcb7 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -119,6 +119,9 @@ no_work_pending: ct_user_enter save = 0 +#ifdef CONFIG_GCC_PLUGIN_STACKLEAK + bl stackleak_erase_on_task_stack +#endif restore_user_regs fast = 0, offset = 0 ENDPROC(ret_to_user_from_irq) ENDPROC(ret_to_user) diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S index 3e7bcaca5e07..bc598e3d8dd2 100644 --- a/arch/arm/kernel/entry-ftrace.S +++ b/arch/arm/kernel/entry-ftrace.S @@ -271,6 +271,10 @@ ENTRY(ftrace_stub) ret lr ENDPROC(ftrace_stub) +ENTRY(ftrace_stub_graph) + ret lr +ENDPROC(ftrace_stub_graph) + #ifdef CONFIG_DYNAMIC_FTRACE __INIT diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index a0b6d1e3812f..845acf9ce21e 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -23,7 +23,7 @@ #include <asm/insn.h> #include <asm/set_memory.h> #include <asm/stacktrace.h> -#include <asm/patch.h> +#include <asm/text-patching.h> /* * The compiler emitted profiling hook consists of @@ -232,11 +232,24 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, unsigned long old; if (unlikely(atomic_read(¤t->tracing_graph_pause))) +err_out: return; if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER)) { - /* FP points one word below parent's top of stack */ - frame_pointer += 4; + /* + * Usually, the stack frames are contiguous in memory but cases + * have been observed where the next stack frame does not live + * at 'frame_pointer + 4' as this code used to assume. + * + * Instead, dereference the field in the stack frame that + * stores the SP of the calling frame: to avoid unbounded + * recursion, this cannot involve any ftrace instrumented + * functions, so use the __get_kernel_nofault() primitive + * directly. + */ + __get_kernel_nofault(&frame_pointer, + (unsigned long *)(frame_pointer - 8), + unsigned long, err_out); } else { struct stackframe frame = { .fp = frame_pointer, diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 1ec35f065617..f22c50d4bd41 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -252,18 +252,23 @@ __create_page_tables: */ add r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ENTRY_ORDER) ldr r6, =(_end - 1) + + /* For XIP, kernel_sec_start/kernel_sec_end are currently in RO memory */ +#ifndef CONFIG_XIP_KERNEL adr_l r5, kernel_sec_start @ _pa(kernel_sec_start) #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32 str r8, [r5, #4] @ Save physical start of kernel (BE) #else str r8, [r5] @ Save physical start of kernel (LE) #endif +#endif orr r3, r8, r7 @ Add the MMU flags add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER) 1: str r3, [r0], #1 << PMD_ENTRY_ORDER add r3, r3, #1 << SECTION_SHIFT cmp r0, r6 bls 1b +#ifndef CONFIG_XIP_KERNEL eor r3, r3, r7 @ Remove the MMU flags adr_l r5, kernel_sec_end @ _pa(kernel_sec_end) #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32 @@ -271,8 +276,7 @@ __create_page_tables: #else str r3, [r5] @ Save physical end of kernel (LE) #endif - -#ifdef CONFIG_XIP_KERNEL +#else /* * Map the kernel image separately as it is not located in RAM. */ @@ -407,7 +411,11 @@ ENTRY(secondary_startup) /* * Use the page tables supplied from __cpu_up. */ +#ifdef CONFIG_XIP_KERNEL + ldr r3, =(secondary_data + PLAT_PHYS_OFFSET - PAGE_OFFSET) +#else adr_l r3, secondary_data +#endif mov_l r12, __secondary_switched ldrd r4, r5, [r3, #0] @ get secondary_data.pgdir ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE: diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index dc0fb7a81371..a12efd0f43e8 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -17,6 +17,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/smp.h> +#include <linux/cfi.h> #include <linux/cpu_pm.h> #include <linux/coresight.h> @@ -626,7 +627,7 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, hw->address &= ~alignment_mask; hw->ctrl.len <<= offset; - if (uses_default_overflow_handler(bp)) { + if (is_default_overflow_handler(bp)) { /* * Mismatch breakpoints are required for single-stepping * breakpoints. @@ -798,7 +799,7 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, * Otherwise, insert a temporary mismatch breakpoint so that * we can single-step over the watchpoint trigger. */ - if (!uses_default_overflow_handler(wp)) + if (!is_default_overflow_handler(wp)) continue; step: enable_single_step(wp, instruction_pointer(regs)); @@ -811,7 +812,7 @@ step: info->trigger = addr; pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); perf_bp_event(wp, regs); - if (uses_default_overflow_handler(wp)) + if (is_default_overflow_handler(wp)) enable_single_step(wp, instruction_pointer(regs)); } @@ -886,7 +887,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs) info->trigger = addr; pr_debug("breakpoint fired: address = 0x%x\n", addr); perf_bp_event(bp, regs); - if (uses_default_overflow_handler(bp)) + if (is_default_overflow_handler(bp)) enable_single_step(bp, addr); goto unlock; } @@ -903,6 +904,37 @@ unlock: watchpoint_single_step_handler(addr); } +#ifdef CONFIG_CFI_CLANG +static void hw_breakpoint_cfi_handler(struct pt_regs *regs) +{ + /* + * TODO: implementing target and type to pass to CFI using the more + * elaborate report_cfi_failure() requires compiler work. To be able + * to properly extract target information the compiler needs to + * emit a stable instructions sequence for the CFI checks so we can + * decode the instructions preceding the trap and figure out which + * registers were used. + */ + + switch (report_cfi_failure_noaddr(regs, instruction_pointer(regs))) { + case BUG_TRAP_TYPE_BUG: + die("Oops - CFI", regs, 0); + break; + case BUG_TRAP_TYPE_WARN: + /* Skip the breaking instruction */ + instruction_pointer(regs) += 4; + break; + default: + die("Unknown CFI error", regs, 0); + break; + } +} +#else +static void hw_breakpoint_cfi_handler(struct pt_regs *regs) +{ +} +#endif + /* * Called from either the Data Abort Handler [watchpoint] or the * Prefetch Abort Handler [breakpoint] with interrupts disabled. @@ -932,6 +964,9 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, case ARM_ENTRY_SYNC_WATCHPOINT: watchpoint_handler(addr, fsr, regs); break; + case ARM_ENTRY_CFI_BREAKPOINT: + hw_breakpoint_cfi_handler(regs); + break; default: ret = 1; /* Unhandled fault. */ } diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index fe28fc1f759d..e1993e28a9ec 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -32,6 +32,7 @@ #include <linux/kallsyms.h> #include <linux/proc_fs.h> #include <linux/export.h> +#include <linux/vmalloc.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/cache-uniphier.h> @@ -110,7 +111,7 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (unlikely(!irq || irq >= nr_irqs)) + if (unlikely(!irq || irq >= irq_get_nr_irqs())) desc = NULL; else desc = irq_to_desc(irq); @@ -150,7 +151,6 @@ void __init init_IRQ(void) #ifdef CONFIG_SPARSE_IRQ int __init arch_probe_nr_irqs(void) { - nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS; - return nr_irqs; + return irq_set_nr_irqs(machine_desc->nr_irqs ? : NR_IRQS); } #endif diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c index 905b1b191546..db8be609fab2 100644 --- a/arch/arm/kernel/isa.c +++ b/arch/arm/kernel/isa.c @@ -16,7 +16,7 @@ static unsigned int isa_membase, isa_portbase, isa_portshift; -static struct ctl_table ctl_isa_vars[] = { +static const struct ctl_table ctl_isa_vars[] = { { .procname = "membase", .data = &isa_membase, diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c index eb9c24b6e8e2..a06a92d0f550 100644 --- a/arch/arm/kernel/jump_label.c +++ b/arch/arm/kernel/jump_label.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/kernel.h> #include <linux/jump_label.h> -#include <asm/patch.h> +#include <asm/text-patching.h> #include <asm/insn.h> static void __arch_jump_label_transform(struct jump_entry *entry, diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index 22f937e6f3ff..ab76c55fd610 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -15,7 +15,7 @@ #include <linux/kgdb.h> #include <linux/uaccess.h> -#include <asm/patch.h> +#include <asm/text-patching.h> #include <asm/traps.h> struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 80ceb5bd2680..dd430477e7c1 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -127,29 +127,6 @@ void crash_smp_send_stop(void) cpus_stopped = 1; } -static void machine_kexec_mask_interrupts(void) -{ - unsigned int i; - struct irq_desc *desc; - - for_each_irq_desc(i, desc) { - struct irq_chip *chip; - - chip = irq_desc_get_chip(desc); - if (!chip) - continue; - - if (chip->irq_eoi && irqd_irq_inprogress(&desc->irq_data)) - chip->irq_eoi(&desc->irq_data); - - if (chip->irq_mask) - chip->irq_mask(&desc->irq_data); - - if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data)) - chip->irq_disable(&desc->irq_data); - } -} - void machine_crash_shutdown(struct pt_regs *regs) { local_irq_disable(); diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c index da2ee8d6ef1a..354ce16d83cb 100644 --- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -285,11 +285,9 @@ bool in_module_plt(unsigned long loc) struct module *mod; bool ret; - preempt_disable(); + guard(rcu)(); mod = __module_text_address(loc); ret = mod && (loc - (u32)mod->arch.core.plt_ent < mod->arch.core.plt_count * PLT_ENT_SIZE || loc - (u32)mod->arch.init.plt_ent < mod->arch.init.plt_count * PLT_ENT_SIZE); - preempt_enable(); - return ret; } diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index e74d84f58b77..da488d92e7a0 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -12,48 +12,14 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/elf.h> -#include <linux/vmalloc.h> #include <linux/fs.h> #include <linux/string.h> -#include <linux/gfp.h> #include <asm/sections.h> #include <asm/smp_plat.h> #include <asm/unwind.h> #include <asm/opcodes.h> -#ifdef CONFIG_XIP_KERNEL -/* - * The XIP kernel text is mapped in the module area for modules and - * some other stuff to work without any indirect relocations. - * MODULES_VADDR is redefined here and not in asm/memory.h to avoid - * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. - */ -#undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK) -#endif - -#ifdef CONFIG_MMU -void *module_alloc(unsigned long size) -{ - gfp_t gfp_mask = GFP_KERNEL; - void *p; - - /* Silence the initial allocation */ - if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS)) - gfp_mask |= __GFP_NOWARN; - - p = __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END, - gfp_mask, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, - __builtin_return_address(0)); - if (!IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || p) - return p; - return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END, - GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, - __builtin_return_address(0)); -} -#endif - bool module_init_section(const char *name) { return strstarts(name, ".init") || @@ -429,11 +395,6 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, return 0; } -struct mod_unwind_map { - const Elf_Shdr *unw_sec; - const Elf_Shdr *txt_sec; -}; - static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, const char *name) { diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c index e9e828b6bb30..4d45e60cd46d 100644 --- a/arch/arm/kernel/patch.c +++ b/arch/arm/kernel/patch.c @@ -9,7 +9,7 @@ #include <asm/fixmap.h> #include <asm/smp_plat.h> #include <asm/opcodes.h> -#include <asm/patch.h> +#include <asm/text-patching.h> struct patch { void *addr; diff --git a/arch/arm/kernel/perf_callchain.c b/arch/arm/kernel/perf_callchain.c index 7147edbe56c6..a2601b1ef318 100644 --- a/arch/arm/kernel/perf_callchain.c +++ b/arch/arm/kernel/perf_callchain.c @@ -85,8 +85,7 @@ static bool callchain_trace(void *data, unsigned long pc) { struct perf_callchain_entry_ctx *entry = data; - perf_callchain_store(entry, pc); - return true; + return perf_callchain_store(entry, pc) == 0; } void @@ -97,20 +96,3 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re arm_get_current_stackframe(regs, &fr); walk_stackframe(&fr, callchain_trace, entry); } - -unsigned long perf_instruction_pointer(struct pt_regs *regs) -{ - return instruction_pointer(regs); -} - -unsigned long perf_misc_flags(struct pt_regs *regs) -{ - int misc = 0; - - if (user_mode(regs)) - misc |= PERF_RECORD_MISC_USER; - else - misc |= PERF_RECORD_MISC_KERNEL; - - return misc; -} diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c deleted file mode 100644 index d9fd53841591..000000000000 --- a/arch/arm/kernel/perf_event_v6.c +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARMv6 Performance counter handling code. - * - * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles - * - * ARMv6 has 2 configurable performance counters and a single cycle counter. - * They all share a single reset bit but can be written to zero so we can use - * that for a reset. - * - * The counters can't be individually enabled or disabled so when we remove - * one event and replace it with another we could get spurious counts from the - * wrong event. However, we can take advantage of the fact that the - * performance counters can export events to the event bus, and the event bus - * itself can be monitored. This requires that we *don't* export the events to - * the event bus. The procedure for disabling a configurable counter is: - * - change the counter to count the ETMEXTOUT[0] signal (0x20). This - * effectively stops the counter from counting. - * - disable the counter's interrupt generation (each counter has it's - * own interrupt enable bit). - * Once stopped, the counter value can be written as 0 to reset. - * - * To enable a counter: - * - enable the counter's interrupt generation. - * - set the new event type. - * - * Note: the dedicated cycle counter only counts cycles and can't be - * enabled/disabled independently of the others. When we want to disable the - * cycle counter, we have to just disable the interrupt reporting and start - * ignoring that counter. When re-enabling, we have to reset the value and - * enable the interrupt. - */ - -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) - -#include <asm/cputype.h> -#include <asm/irq_regs.h> - -#include <linux/of.h> -#include <linux/perf/arm_pmu.h> -#include <linux/platform_device.h> - -enum armv6_perf_types { - ARMV6_PERFCTR_ICACHE_MISS = 0x0, - ARMV6_PERFCTR_IBUF_STALL = 0x1, - ARMV6_PERFCTR_DDEP_STALL = 0x2, - ARMV6_PERFCTR_ITLB_MISS = 0x3, - ARMV6_PERFCTR_DTLB_MISS = 0x4, - ARMV6_PERFCTR_BR_EXEC = 0x5, - ARMV6_PERFCTR_BR_MISPREDICT = 0x6, - ARMV6_PERFCTR_INSTR_EXEC = 0x7, - ARMV6_PERFCTR_DCACHE_HIT = 0x9, - ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, - ARMV6_PERFCTR_DCACHE_MISS = 0xB, - ARMV6_PERFCTR_DCACHE_WBACK = 0xC, - ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, - ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, - ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, - ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, - ARMV6_PERFCTR_WBUF_DRAINED = 0x12, - ARMV6_PERFCTR_CPU_CYCLES = 0xFF, - ARMV6_PERFCTR_NOP = 0x20, -}; - -enum armv6_counters { - ARMV6_CYCLE_COUNTER = 0, - ARMV6_COUNTER0, - ARMV6_COUNTER1, -}; - -/* - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL, -}; - -static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - /* - * The performance counters don't differentiate between read and write - * accesses/misses so this isn't strictly correct, but it's the best we - * can do. Writes and reads get combined. - */ - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - - /* - * The ARM performance counters can count micro DTLB misses, micro ITLB - * misses and main TLB misses. There isn't an event for TLB misses, so - * use the micro misses here and if users want the main TLB misses they - * can use a raw counter. - */ - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, -}; - -static inline unsigned long -armv6_pmcr_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); - return val; -} - -static inline void -armv6_pmcr_write(unsigned long val) -{ - asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); -} - -#define ARMV6_PMCR_ENABLE (1 << 0) -#define ARMV6_PMCR_CTR01_RESET (1 << 1) -#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) -#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) -#define ARMV6_PMCR_COUNT0_IEN (1 << 4) -#define ARMV6_PMCR_COUNT1_IEN (1 << 5) -#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) -#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) -#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) -#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) -#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 -#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) -#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 -#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) - -#define ARMV6_PMCR_OVERFLOWED_MASK \ - (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ - ARMV6_PMCR_CCOUNT_OVERFLOW) - -static inline int -armv6_pmcr_has_overflowed(unsigned long pmcr) -{ - return pmcr & ARMV6_PMCR_OVERFLOWED_MASK; -} - -static inline int -armv6_pmcr_counter_has_overflowed(unsigned long pmcr, - enum armv6_counters counter) -{ - int ret = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; - else if (ARMV6_COUNTER0 == counter) - ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; - else if (ARMV6_COUNTER1 == counter) - ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return ret; -} - -static inline u64 armv6pmu_read_counter(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int counter = hwc->idx; - unsigned long value = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return value; -} - -static inline void armv6pmu_write_counter(struct perf_event *event, u64 value) -{ - struct hw_perf_event *hwc = &event->hw; - int counter = hwc->idx; - - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); -} - -static void armv6pmu_enable_event(struct perf_event *event) -{ - unsigned long val, mask, evt; - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = 0; - evt = ARMV6_PMCR_CCOUNT_IEN; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_EVT_COUNT0_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | - ARMV6_PMCR_COUNT0_IEN; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_EVT_COUNT1_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | - ARMV6_PMCR_COUNT1_IEN; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the event - * that we're interested in. - */ - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); -} - -static irqreturn_t -armv6pmu_handle_irq(struct arm_pmu *cpu_pmu) -{ - unsigned long pmcr = armv6_pmcr_read(); - struct perf_sample_data data; - struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); - struct pt_regs *regs; - int idx; - - if (!armv6_pmcr_has_overflowed(pmcr)) - return IRQ_NONE; - - regs = get_irq_regs(); - - /* - * The interrupts are cleared by writing the overflow flags back to - * the control register. All of the other bits don't have any effect - * if they are rewritten, so write the whole value back. - */ - armv6_pmcr_write(pmcr); - - for (idx = 0; idx < cpu_pmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - /* Ignore if we don't have an event. */ - if (!event) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event); - perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event)) - continue; - - if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(event); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void armv6pmu_start(struct arm_pmu *cpu_pmu) -{ - unsigned long val; - - val = armv6_pmcr_read(); - val |= ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); -} - -static void armv6pmu_stop(struct arm_pmu *cpu_pmu) -{ - unsigned long val; - - val = armv6_pmcr_read(); - val &= ~ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); -} - -static int -armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - /* Always place a cycle counter into the cycle counter. */ - if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) { - if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV6_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * counter0 and counter1. - */ - if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) - return ARMV6_COUNTER1; - - if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) - return ARMV6_COUNTER0; - - /* The counters are all in use. */ - return -EAGAIN; - } -} - -static void armv6pmu_clear_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - clear_bit(event->hw.idx, cpuc->used_mask); -} - -static void armv6pmu_disable_event(struct perf_event *event) -{ - unsigned long val, mask, evt; - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = ARMV6_PMCR_CCOUNT_IEN; - evt = 0; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the number - * of ETM bus signal assertion cycles. The external reporting should - * be disabled and so this should never increment. - */ - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); -} - -static int armv6_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &armv6_perf_map, - &armv6_perf_cache_map, 0xFF); -} - -static void armv6pmu_init(struct arm_pmu *cpu_pmu) -{ - cpu_pmu->handle_irq = armv6pmu_handle_irq; - cpu_pmu->enable = armv6pmu_enable_event; - cpu_pmu->disable = armv6pmu_disable_event; - cpu_pmu->read_counter = armv6pmu_read_counter; - cpu_pmu->write_counter = armv6pmu_write_counter; - cpu_pmu->get_event_idx = armv6pmu_get_event_idx; - cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx; - cpu_pmu->start = armv6pmu_start; - cpu_pmu->stop = armv6pmu_stop; - cpu_pmu->map_event = armv6_map_event; - cpu_pmu->num_events = 3; -} - -static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv6pmu_init(cpu_pmu); - cpu_pmu->name = "armv6_1136"; - return 0; -} - -static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv6pmu_init(cpu_pmu); - cpu_pmu->name = "armv6_1156"; - return 0; -} - -static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv6pmu_init(cpu_pmu); - cpu_pmu->name = "armv6_1176"; - return 0; -} - -static const struct of_device_id armv6_pmu_of_device_ids[] = { - {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, - {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, - { /* sentinel value */ } -}; - -static const struct pmu_probe_info armv6_pmu_probe_table[] = { - ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init), - { /* sentinel value */ } -}; - -static int armv6_pmu_device_probe(struct platform_device *pdev) -{ - return arm_pmu_device_probe(pdev, armv6_pmu_of_device_ids, - armv6_pmu_probe_table); -} - -static struct platform_driver armv6_pmu_driver = { - .driver = { - .name = "armv6-pmu", - .of_match_table = armv6_pmu_of_device_ids, - }, - .probe = armv6_pmu_device_probe, -}; - -builtin_platform_driver(armv6_pmu_driver); -#endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c deleted file mode 100644 index a3322e2b3ea4..000000000000 --- a/arch/arm/kernel/perf_event_v7.c +++ /dev/null @@ -1,2005 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. - * - * ARMv7 support: Jean Pihet <jpihet@mvista.com> - * 2010 (c) MontaVista Software, LLC. - * - * Copied from ARMv6 code, with the low level code inspired - * by the ARMv7 Oprofile code. - * - * Cortex-A8 has up to 4 configurable performance counters and - * a single cycle counter. - * Cortex-A9 has up to 31 configurable performance counters and - * a single cycle counter. - * - * All counters can be enabled/disabled and IRQ masked separately. The cycle - * counter and all 4 performance counters together can be reset separately. - */ - -#ifdef CONFIG_CPU_V7 - -#include <asm/cp15.h> -#include <asm/cputype.h> -#include <asm/irq_regs.h> -#include <asm/vfp.h> -#include "../vfp/vfpinstr.h" - -#include <linux/of.h> -#include <linux/perf/arm_pmu.h> -#include <linux/platform_device.h> - -/* - * Common ARMv7 event types - * - * Note: An implementation may not be able to count all of these events - * but the encodings are considered to be `reserved' in the case that - * they are not available. - */ -#define ARMV7_PERFCTR_PMNC_SW_INCR 0x00 -#define ARMV7_PERFCTR_L1_ICACHE_REFILL 0x01 -#define ARMV7_PERFCTR_ITLB_REFILL 0x02 -#define ARMV7_PERFCTR_L1_DCACHE_REFILL 0x03 -#define ARMV7_PERFCTR_L1_DCACHE_ACCESS 0x04 -#define ARMV7_PERFCTR_DTLB_REFILL 0x05 -#define ARMV7_PERFCTR_MEM_READ 0x06 -#define ARMV7_PERFCTR_MEM_WRITE 0x07 -#define ARMV7_PERFCTR_INSTR_EXECUTED 0x08 -#define ARMV7_PERFCTR_EXC_TAKEN 0x09 -#define ARMV7_PERFCTR_EXC_EXECUTED 0x0A -#define ARMV7_PERFCTR_CID_WRITE 0x0B - -/* - * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. - * It counts: - * - all (taken) branch instructions, - * - instructions that explicitly write the PC, - * - exception generating instructions. - */ -#define ARMV7_PERFCTR_PC_WRITE 0x0C -#define ARMV7_PERFCTR_PC_IMM_BRANCH 0x0D -#define ARMV7_PERFCTR_PC_PROC_RETURN 0x0E -#define ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS 0x0F -#define ARMV7_PERFCTR_PC_BRANCH_MIS_PRED 0x10 -#define ARMV7_PERFCTR_CLOCK_CYCLES 0x11 -#define ARMV7_PERFCTR_PC_BRANCH_PRED 0x12 - -/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */ -#define ARMV7_PERFCTR_MEM_ACCESS 0x13 -#define ARMV7_PERFCTR_L1_ICACHE_ACCESS 0x14 -#define ARMV7_PERFCTR_L1_DCACHE_WB 0x15 -#define ARMV7_PERFCTR_L2_CACHE_ACCESS 0x16 -#define ARMV7_PERFCTR_L2_CACHE_REFILL 0x17 -#define ARMV7_PERFCTR_L2_CACHE_WB 0x18 -#define ARMV7_PERFCTR_BUS_ACCESS 0x19 -#define ARMV7_PERFCTR_MEM_ERROR 0x1A -#define ARMV7_PERFCTR_INSTR_SPEC 0x1B -#define ARMV7_PERFCTR_TTBR_WRITE 0x1C -#define ARMV7_PERFCTR_BUS_CYCLES 0x1D - -#define ARMV7_PERFCTR_CPU_CYCLES 0xFF - -/* ARMv7 Cortex-A8 specific event types */ -#define ARMV7_A8_PERFCTR_L2_CACHE_ACCESS 0x43 -#define ARMV7_A8_PERFCTR_L2_CACHE_REFILL 0x44 -#define ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS 0x50 -#define ARMV7_A8_PERFCTR_STALL_ISIDE 0x56 - -/* ARMv7 Cortex-A9 specific event types */ -#define ARMV7_A9_PERFCTR_INSTR_CORE_RENAME 0x68 -#define ARMV7_A9_PERFCTR_STALL_ICACHE 0x60 -#define ARMV7_A9_PERFCTR_STALL_DISPATCH 0x66 - -/* ARMv7 Cortex-A5 specific event types */ -#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL 0xc2 -#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP 0xc3 - -/* ARMv7 Cortex-A15 specific event types */ -#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ 0x40 -#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE 0x41 -#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ 0x42 -#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE 0x43 - -#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ 0x4C -#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE 0x4D - -#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ 0x50 -#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE 0x51 -#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ 0x52 -#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE 0x53 - -#define ARMV7_A15_PERFCTR_PC_WRITE_SPEC 0x76 - -/* ARMv7 Cortex-A12 specific event types */ -#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ 0x40 -#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE 0x41 - -#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ 0x50 -#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE 0x51 - -#define ARMV7_A12_PERFCTR_PC_WRITE_SPEC 0x76 - -#define ARMV7_A12_PERFCTR_PF_TLB_REFILL 0xe7 - -/* ARMv7 Krait specific event types */ -#define KRAIT_PMRESR0_GROUP0 0xcc -#define KRAIT_PMRESR1_GROUP0 0xd0 -#define KRAIT_PMRESR2_GROUP0 0xd4 -#define KRAIT_VPMRESR0_GROUP0 0xd8 - -#define KRAIT_PERFCTR_L1_ICACHE_ACCESS 0x10011 -#define KRAIT_PERFCTR_L1_ICACHE_MISS 0x10010 - -#define KRAIT_PERFCTR_L1_ITLB_ACCESS 0x12222 -#define KRAIT_PERFCTR_L1_DTLB_ACCESS 0x12210 - -/* ARMv7 Scorpion specific event types */ -#define SCORPION_LPM0_GROUP0 0x4c -#define SCORPION_LPM1_GROUP0 0x50 -#define SCORPION_LPM2_GROUP0 0x54 -#define SCORPION_L2LPM_GROUP0 0x58 -#define SCORPION_VLPM_GROUP0 0x5c - -#define SCORPION_ICACHE_ACCESS 0x10053 -#define SCORPION_ICACHE_MISS 0x10052 - -#define SCORPION_DTLB_ACCESS 0x12013 -#define SCORPION_DTLB_MISS 0x12012 - -#define SCORPION_ITLB_MISS 0x12021 - -/* - * Cortex-A8 HW events mapping - * - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A8_PERFCTR_STALL_ISIDE, -}; - -static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - /* - * The performance counters don't differentiate between read and write - * accesses/misses so this isn't strictly correct, but it's the best we - * can do. Writes and reads get combined. - */ - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - - [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, - [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, - [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, - [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -/* - * Cortex-A9 HW events mapping - */ -static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_A9_PERFCTR_INSTR_CORE_RENAME, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A9_PERFCTR_STALL_ICACHE, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV7_A9_PERFCTR_STALL_DISPATCH, -}; - -static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - /* - * The performance counters don't differentiate between read and write - * accesses/misses so this isn't strictly correct, but it's the best we - * can do. Writes and reads get combined. - */ - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -/* - * Cortex-A5 HW events mapping - */ -static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, - [C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, - - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - /* - * The prefetch counters don't differentiate between the I side and the - * D side. - */ - [C(L1I)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, - [C(L1I)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -/* - * Cortex-A15 HW events mapping - */ -static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A15_PERFCTR_PC_WRITE_SPEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, -}; - -static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE, - - /* - * Not all performance counters differentiate between read and write - * accesses/misses so we're not always strictly correct, but it's the - * best we can do. Writes and reads get combined in these cases. - */ - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - - [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ, - [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ, - [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE, - [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -/* - * Cortex-A7 HW events mapping - */ -static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, -}; - -static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - /* - * The performance counters don't differentiate between read and write - * accesses/misses so this isn't strictly correct, but it's the best we - * can do. Writes and reads get combined. - */ - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - - [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, - [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, - [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -/* - * Cortex-A12 HW events mapping - */ -static const unsigned armv7_a12_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A12_PERFCTR_PC_WRITE_SPEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, -}; - -static const unsigned armv7_a12_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - - /* - * Not all performance counters differentiate between read and write - * accesses/misses so we're not always strictly correct, but it's the - * best we can do. Writes and reads get combined in these cases. - */ - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - - [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ, - [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE, - [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - [C(DTLB)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A12_PERFCTR_PF_TLB_REFILL, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -/* - * Krait HW events mapping - */ -static const unsigned krait_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned krait_perf_map_no_branch[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned krait_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - /* - * The performance counters don't differentiate between read and write - * accesses/misses so this isn't strictly correct, but it's the best we - * can do. Writes and reads get combined. - */ - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ICACHE_ACCESS, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = KRAIT_PERFCTR_L1_ICACHE_MISS, - - [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, - [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, - - [C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, - [C(ITLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -/* - * Scorpion HW events mapping - */ -static const unsigned scorpion_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - /* - * The performance counters don't differentiate between read and write - * accesses/misses so this isn't strictly correct, but it's the best we - * can do. Writes and reads get combined. - */ - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_ICACHE_ACCESS, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ICACHE_MISS, - /* - * Only ITLB misses and DTLB refills are supported. If users want the - * DTLB refills misses a raw counter must be used. - */ - [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS, - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_DTLB_MISS, - [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_DTLB_MISS, - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ITLB_MISS, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_ITLB_MISS, - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, -}; - -PMU_FORMAT_ATTR(event, "config:0-7"); - -static struct attribute *armv7_pmu_format_attrs[] = { - &format_attr_event.attr, - NULL, -}; - -static struct attribute_group armv7_pmu_format_attr_group = { - .name = "format", - .attrs = armv7_pmu_format_attrs, -}; - -#define ARMV7_EVENT_ATTR_RESOLVE(m) #m -#define ARMV7_EVENT_ATTR(name, config) \ - PMU_EVENT_ATTR_STRING(name, armv7_event_attr_##name, \ - "event=" ARMV7_EVENT_ATTR_RESOLVE(config)) - -ARMV7_EVENT_ATTR(sw_incr, ARMV7_PERFCTR_PMNC_SW_INCR); -ARMV7_EVENT_ATTR(l1i_cache_refill, ARMV7_PERFCTR_L1_ICACHE_REFILL); -ARMV7_EVENT_ATTR(l1i_tlb_refill, ARMV7_PERFCTR_ITLB_REFILL); -ARMV7_EVENT_ATTR(l1d_cache_refill, ARMV7_PERFCTR_L1_DCACHE_REFILL); -ARMV7_EVENT_ATTR(l1d_cache, ARMV7_PERFCTR_L1_DCACHE_ACCESS); -ARMV7_EVENT_ATTR(l1d_tlb_refill, ARMV7_PERFCTR_DTLB_REFILL); -ARMV7_EVENT_ATTR(ld_retired, ARMV7_PERFCTR_MEM_READ); -ARMV7_EVENT_ATTR(st_retired, ARMV7_PERFCTR_MEM_WRITE); -ARMV7_EVENT_ATTR(inst_retired, ARMV7_PERFCTR_INSTR_EXECUTED); -ARMV7_EVENT_ATTR(exc_taken, ARMV7_PERFCTR_EXC_TAKEN); -ARMV7_EVENT_ATTR(exc_return, ARMV7_PERFCTR_EXC_EXECUTED); -ARMV7_EVENT_ATTR(cid_write_retired, ARMV7_PERFCTR_CID_WRITE); -ARMV7_EVENT_ATTR(pc_write_retired, ARMV7_PERFCTR_PC_WRITE); -ARMV7_EVENT_ATTR(br_immed_retired, ARMV7_PERFCTR_PC_IMM_BRANCH); -ARMV7_EVENT_ATTR(br_return_retired, ARMV7_PERFCTR_PC_PROC_RETURN); -ARMV7_EVENT_ATTR(unaligned_ldst_retired, ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS); -ARMV7_EVENT_ATTR(br_mis_pred, ARMV7_PERFCTR_PC_BRANCH_MIS_PRED); -ARMV7_EVENT_ATTR(cpu_cycles, ARMV7_PERFCTR_CLOCK_CYCLES); -ARMV7_EVENT_ATTR(br_pred, ARMV7_PERFCTR_PC_BRANCH_PRED); - -static struct attribute *armv7_pmuv1_event_attrs[] = { - &armv7_event_attr_sw_incr.attr.attr, - &armv7_event_attr_l1i_cache_refill.attr.attr, - &armv7_event_attr_l1i_tlb_refill.attr.attr, - &armv7_event_attr_l1d_cache_refill.attr.attr, - &armv7_event_attr_l1d_cache.attr.attr, - &armv7_event_attr_l1d_tlb_refill.attr.attr, - &armv7_event_attr_ld_retired.attr.attr, - &armv7_event_attr_st_retired.attr.attr, - &armv7_event_attr_inst_retired.attr.attr, - &armv7_event_attr_exc_taken.attr.attr, - &armv7_event_attr_exc_return.attr.attr, - &armv7_event_attr_cid_write_retired.attr.attr, - &armv7_event_attr_pc_write_retired.attr.attr, - &armv7_event_attr_br_immed_retired.attr.attr, - &armv7_event_attr_br_return_retired.attr.attr, - &armv7_event_attr_unaligned_ldst_retired.attr.attr, - &armv7_event_attr_br_mis_pred.attr.attr, - &armv7_event_attr_cpu_cycles.attr.attr, - &armv7_event_attr_br_pred.attr.attr, - NULL, -}; - -static struct attribute_group armv7_pmuv1_events_attr_group = { - .name = "events", - .attrs = armv7_pmuv1_event_attrs, -}; - -ARMV7_EVENT_ATTR(mem_access, ARMV7_PERFCTR_MEM_ACCESS); -ARMV7_EVENT_ATTR(l1i_cache, ARMV7_PERFCTR_L1_ICACHE_ACCESS); -ARMV7_EVENT_ATTR(l1d_cache_wb, ARMV7_PERFCTR_L1_DCACHE_WB); -ARMV7_EVENT_ATTR(l2d_cache, ARMV7_PERFCTR_L2_CACHE_ACCESS); -ARMV7_EVENT_ATTR(l2d_cache_refill, ARMV7_PERFCTR_L2_CACHE_REFILL); -ARMV7_EVENT_ATTR(l2d_cache_wb, ARMV7_PERFCTR_L2_CACHE_WB); -ARMV7_EVENT_ATTR(bus_access, ARMV7_PERFCTR_BUS_ACCESS); -ARMV7_EVENT_ATTR(memory_error, ARMV7_PERFCTR_MEM_ERROR); -ARMV7_EVENT_ATTR(inst_spec, ARMV7_PERFCTR_INSTR_SPEC); -ARMV7_EVENT_ATTR(ttbr_write_retired, ARMV7_PERFCTR_TTBR_WRITE); -ARMV7_EVENT_ATTR(bus_cycles, ARMV7_PERFCTR_BUS_CYCLES); - -static struct attribute *armv7_pmuv2_event_attrs[] = { - &armv7_event_attr_sw_incr.attr.attr, - &armv7_event_attr_l1i_cache_refill.attr.attr, - &armv7_event_attr_l1i_tlb_refill.attr.attr, - &armv7_event_attr_l1d_cache_refill.attr.attr, - &armv7_event_attr_l1d_cache.attr.attr, - &armv7_event_attr_l1d_tlb_refill.attr.attr, - &armv7_event_attr_ld_retired.attr.attr, - &armv7_event_attr_st_retired.attr.attr, - &armv7_event_attr_inst_retired.attr.attr, - &armv7_event_attr_exc_taken.attr.attr, - &armv7_event_attr_exc_return.attr.attr, - &armv7_event_attr_cid_write_retired.attr.attr, - &armv7_event_attr_pc_write_retired.attr.attr, - &armv7_event_attr_br_immed_retired.attr.attr, - &armv7_event_attr_br_return_retired.attr.attr, - &armv7_event_attr_unaligned_ldst_retired.attr.attr, - &armv7_event_attr_br_mis_pred.attr.attr, - &armv7_event_attr_cpu_cycles.attr.attr, - &armv7_event_attr_br_pred.attr.attr, - &armv7_event_attr_mem_access.attr.attr, - &armv7_event_attr_l1i_cache.attr.attr, - &armv7_event_attr_l1d_cache_wb.attr.attr, - &armv7_event_attr_l2d_cache.attr.attr, - &armv7_event_attr_l2d_cache_refill.attr.attr, - &armv7_event_attr_l2d_cache_wb.attr.attr, - &armv7_event_attr_bus_access.attr.attr, - &armv7_event_attr_memory_error.attr.attr, - &armv7_event_attr_inst_spec.attr.attr, - &armv7_event_attr_ttbr_write_retired.attr.attr, - &armv7_event_attr_bus_cycles.attr.attr, - NULL, -}; - -static struct attribute_group armv7_pmuv2_events_attr_group = { - .name = "events", - .attrs = armv7_pmuv2_event_attrs, -}; - -/* - * Perf Events' indices - */ -#define ARMV7_IDX_CYCLE_COUNTER 0 -#define ARMV7_IDX_COUNTER0 1 -#define ARMV7_IDX_COUNTER_LAST(cpu_pmu) \ - (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) - -#define ARMV7_MAX_COUNTERS 32 -#define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1) - -/* - * ARMv7 low level PMNC access - */ - -/* - * Perf Event to low level counters mapping - */ -#define ARMV7_IDX_TO_COUNTER(x) \ - (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK) - -/* - * Per-CPU PMNC: config reg - */ -#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ -#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ -#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ -#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ -#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ -#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ -#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ -#define ARMV7_PMNC_N_MASK 0x1f -#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ - -/* - * FLAG: counters overflow flag status reg - */ -#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK - -/* - * PMXEVTYPER: Event selection reg - */ -#define ARMV7_EVTYPE_MASK 0xc80000ff /* Mask for writable bits */ -#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */ - -/* - * Event filters for PMUv2 - */ -#define ARMV7_EXCLUDE_PL1 BIT(31) -#define ARMV7_EXCLUDE_USER BIT(30) -#define ARMV7_INCLUDE_HYP BIT(27) - -/* - * Secure debug enable reg - */ -#define ARMV7_SDER_SUNIDEN BIT(1) /* Permit non-invasive debug */ - -static inline u32 armv7_pmnc_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); - return val; -} - -static inline void armv7_pmnc_write(u32 val) -{ - val &= ARMV7_PMNC_MASK; - isb(); - asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); -} - -static inline int armv7_pmnc_has_overflowed(u32 pmnc) -{ - return pmnc & ARMV7_OVERFLOWED_MASK; -} - -static inline int armv7_pmnc_counter_valid(struct arm_pmu *cpu_pmu, int idx) -{ - return idx >= ARMV7_IDX_CYCLE_COUNTER && - idx <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); -} - -static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx) -{ - return pmnc & BIT(ARMV7_IDX_TO_COUNTER(idx)); -} - -static inline void armv7_pmnc_select_counter(int idx) -{ - u32 counter = ARMV7_IDX_TO_COUNTER(idx); - asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter)); - isb(); -} - -static inline u64 armv7pmu_read_counter(struct perf_event *event) -{ - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - u32 value = 0; - - if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { - pr_err("CPU%u reading wrong counter %d\n", - smp_processor_id(), idx); - } else if (idx == ARMV7_IDX_CYCLE_COUNTER) { - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); - } else { - armv7_pmnc_select_counter(idx); - asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value)); - } - - return value; -} - -static inline void armv7pmu_write_counter(struct perf_event *event, u64 value) -{ - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { - pr_err("CPU%u writing wrong counter %d\n", - smp_processor_id(), idx); - } else if (idx == ARMV7_IDX_CYCLE_COUNTER) { - asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" ((u32)value)); - } else { - armv7_pmnc_select_counter(idx); - asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" ((u32)value)); - } -} - -static inline void armv7_pmnc_write_evtsel(int idx, u32 val) -{ - armv7_pmnc_select_counter(idx); - val &= ARMV7_EVTYPE_MASK; - asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); -} - -static inline void armv7_pmnc_enable_counter(int idx) -{ - u32 counter = ARMV7_IDX_TO_COUNTER(idx); - asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter))); -} - -static inline void armv7_pmnc_disable_counter(int idx) -{ - u32 counter = ARMV7_IDX_TO_COUNTER(idx); - asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter))); -} - -static inline void armv7_pmnc_enable_intens(int idx) -{ - u32 counter = ARMV7_IDX_TO_COUNTER(idx); - asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter))); -} - -static inline void armv7_pmnc_disable_intens(int idx) -{ - u32 counter = ARMV7_IDX_TO_COUNTER(idx); - asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); - isb(); - /* Clear the overflow flag in case an interrupt is pending. */ - asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter))); - isb(); -} - -static inline u32 armv7_pmnc_getreset_flags(void) -{ - u32 val; - - /* Read */ - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - - /* Write to clear flags */ - val &= ARMV7_FLAG_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); - - return val; -} - -#ifdef DEBUG -static void armv7_pmnc_dump_regs(struct arm_pmu *cpu_pmu) -{ - u32 val; - unsigned int cnt; - - pr_info("PMNC registers dump:\n"); - - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); - pr_info("PMNC =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); - pr_info("CNTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); - pr_info("INTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - pr_info("FLAGS =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); - pr_info("SELECT=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); - pr_info("CCNT =0x%08x\n", val); - - for (cnt = ARMV7_IDX_COUNTER0; - cnt <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); cnt++) { - armv7_pmnc_select_counter(cnt); - asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); - pr_info("CNT[%d] count =0x%08x\n", - ARMV7_IDX_TO_COUNTER(cnt), val); - asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); - pr_info("CNT[%d] evtsel=0x%08x\n", - ARMV7_IDX_TO_COUNTER(cnt), val); - } -} -#endif - -static void armv7pmu_enable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - int idx = hwc->idx; - - if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { - pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return; - } - - /* - * Enable counter and interrupt, and set the counter to count - * the event that we're interested in. - */ - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Set event (if destined for PMNx counters) - * We only need to set the event for the cycle counter if we - * have the ability to perform event filtering. - */ - if (cpu_pmu->set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) - armv7_pmnc_write_evtsel(idx, hwc->config_base); - - /* - * Enable interrupt for this counter - */ - armv7_pmnc_enable_intens(idx); - - /* - * Enable counter - */ - armv7_pmnc_enable_counter(idx); -} - -static void armv7pmu_disable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - int idx = hwc->idx; - - if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { - pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return; - } - - /* - * Disable counter and interrupt - */ - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Disable interrupt for this counter - */ - armv7_pmnc_disable_intens(idx); -} - -static irqreturn_t armv7pmu_handle_irq(struct arm_pmu *cpu_pmu) -{ - u32 pmnc; - struct perf_sample_data data; - struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); - struct pt_regs *regs; - int idx; - - /* - * Get and reset the IRQ flags - */ - pmnc = armv7_pmnc_getreset_flags(); - - /* - * Did an overflow occur? - */ - if (!armv7_pmnc_has_overflowed(pmnc)) - return IRQ_NONE; - - /* - * Handle the counter(s) overflow(s) - */ - regs = get_irq_regs(); - - for (idx = 0; idx < cpu_pmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - /* Ignore if we don't have an event. */ - if (!event) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event); - perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event)) - continue; - - if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(event); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void armv7pmu_start(struct arm_pmu *cpu_pmu) -{ - /* Enable all counters */ - armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); -} - -static void armv7pmu_stop(struct arm_pmu *cpu_pmu) -{ - /* Disable all counters */ - armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); -} - -static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - int idx; - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - unsigned long evtype = hwc->config_base & ARMV7_EVTYPE_EVENT; - - /* Always place a cycle counter into the cycle counter. */ - if (evtype == ARMV7_PERFCTR_CPU_CYCLES) { - if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV7_IDX_CYCLE_COUNTER; - } - - /* - * For anything other than a cycle counter, try and use - * the events counters - */ - for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) { - if (!test_and_set_bit(idx, cpuc->used_mask)) - return idx; - } - - /* The counters are all in use. */ - return -EAGAIN; -} - -static void armv7pmu_clear_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - clear_bit(event->hw.idx, cpuc->used_mask); -} - -/* - * Add an event filter to a given event. This will only work for PMUv2 PMUs. - */ -static int armv7pmu_set_event_filter(struct hw_perf_event *event, - struct perf_event_attr *attr) -{ - unsigned long config_base = 0; - - if (attr->exclude_idle) { - pr_debug("ARM performance counters do not support mode exclusion\n"); - return -EOPNOTSUPP; - } - if (attr->exclude_user) - config_base |= ARMV7_EXCLUDE_USER; - if (attr->exclude_kernel) - config_base |= ARMV7_EXCLUDE_PL1; - if (!attr->exclude_hv) - config_base |= ARMV7_INCLUDE_HYP; - - /* - * Install the filter into config_base as this is used to - * construct the event type. - */ - event->config_base = config_base; - - return 0; -} - -static void armv7pmu_reset(void *info) -{ - struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; - u32 idx, nb_cnt = cpu_pmu->num_events, val; - - if (cpu_pmu->secure_access) { - asm volatile("mrc p15, 0, %0, c1, c1, 1" : "=r" (val)); - val |= ARMV7_SDER_SUNIDEN; - asm volatile("mcr p15, 0, %0, c1, c1, 1" : : "r" (val)); - } - - /* The counter and interrupt enable registers are unknown at reset. */ - for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { - armv7_pmnc_disable_counter(idx); - armv7_pmnc_disable_intens(idx); - } - - /* Initialize & Reset PMNC: C and P bits */ - armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); -} - -static int armv7_a8_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &armv7_a8_perf_map, - &armv7_a8_perf_cache_map, 0xFF); -} - -static int armv7_a9_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &armv7_a9_perf_map, - &armv7_a9_perf_cache_map, 0xFF); -} - -static int armv7_a5_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &armv7_a5_perf_map, - &armv7_a5_perf_cache_map, 0xFF); -} - -static int armv7_a15_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &armv7_a15_perf_map, - &armv7_a15_perf_cache_map, 0xFF); -} - -static int armv7_a7_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &armv7_a7_perf_map, - &armv7_a7_perf_cache_map, 0xFF); -} - -static int armv7_a12_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &armv7_a12_perf_map, - &armv7_a12_perf_cache_map, 0xFF); -} - -static int krait_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &krait_perf_map, - &krait_perf_cache_map, 0xFFFFF); -} - -static int krait_map_event_no_branch(struct perf_event *event) -{ - return armpmu_map_event(event, &krait_perf_map_no_branch, - &krait_perf_cache_map, 0xFFFFF); -} - -static int scorpion_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &scorpion_perf_map, - &scorpion_perf_cache_map, 0xFFFFF); -} - -static void armv7pmu_init(struct arm_pmu *cpu_pmu) -{ - cpu_pmu->handle_irq = armv7pmu_handle_irq; - cpu_pmu->enable = armv7pmu_enable_event; - cpu_pmu->disable = armv7pmu_disable_event; - cpu_pmu->read_counter = armv7pmu_read_counter; - cpu_pmu->write_counter = armv7pmu_write_counter; - cpu_pmu->get_event_idx = armv7pmu_get_event_idx; - cpu_pmu->clear_event_idx = armv7pmu_clear_event_idx; - cpu_pmu->start = armv7pmu_start; - cpu_pmu->stop = armv7pmu_stop; - cpu_pmu->reset = armv7pmu_reset; -}; - -static void armv7_read_num_pmnc_events(void *info) -{ - int *nb_cnt = info; - - /* Read the nb of CNTx counters supported from PMNC */ - *nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; - - /* Add the CPU cycles counter */ - *nb_cnt += 1; -} - -static int armv7_probe_num_events(struct arm_pmu *arm_pmu) -{ - return smp_call_function_any(&arm_pmu->supported_cpus, - armv7_read_num_pmnc_events, - &arm_pmu->num_events, 1); -} - -static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_cortex_a8"; - cpu_pmu->map_event = armv7_a8_map_event; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = - &armv7_pmuv1_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = - &armv7_pmu_format_attr_group; - return armv7_probe_num_events(cpu_pmu); -} - -static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_cortex_a9"; - cpu_pmu->map_event = armv7_a9_map_event; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = - &armv7_pmuv1_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = - &armv7_pmu_format_attr_group; - return armv7_probe_num_events(cpu_pmu); -} - -static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_cortex_a5"; - cpu_pmu->map_event = armv7_a5_map_event; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = - &armv7_pmuv1_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = - &armv7_pmu_format_attr_group; - return armv7_probe_num_events(cpu_pmu); -} - -static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_cortex_a15"; - cpu_pmu->map_event = armv7_a15_map_event; - cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = - &armv7_pmuv2_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = - &armv7_pmu_format_attr_group; - return armv7_probe_num_events(cpu_pmu); -} - -static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_cortex_a7"; - cpu_pmu->map_event = armv7_a7_map_event; - cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = - &armv7_pmuv2_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = - &armv7_pmu_format_attr_group; - return armv7_probe_num_events(cpu_pmu); -} - -static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_cortex_a12"; - cpu_pmu->map_event = armv7_a12_map_event; - cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = - &armv7_pmuv2_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = - &armv7_pmu_format_attr_group; - return armv7_probe_num_events(cpu_pmu); -} - -static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) -{ - int ret = armv7_a12_pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_cortex_a17"; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = - &armv7_pmuv2_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = - &armv7_pmu_format_attr_group; - return ret; -} - -/* - * Krait Performance Monitor Region Event Selection Register (PMRESRn) - * - * 31 30 24 16 8 0 - * +--------------------------------+ - * PMRESR0 | EN | CC | CC | CC | CC | N = 1, R = 0 - * +--------------------------------+ - * PMRESR1 | EN | CC | CC | CC | CC | N = 1, R = 1 - * +--------------------------------+ - * PMRESR2 | EN | CC | CC | CC | CC | N = 1, R = 2 - * +--------------------------------+ - * VPMRESR0 | EN | CC | CC | CC | CC | N = 2, R = ? - * +--------------------------------+ - * EN | G=3 | G=2 | G=1 | G=0 - * - * Event Encoding: - * - * hwc->config_base = 0xNRCCG - * - * N = prefix, 1 for Krait CPU (PMRESRn), 2 for Venum VFP (VPMRESR) - * R = region register - * CC = class of events the group G is choosing from - * G = group or particular event - * - * Example: 0x12021 is a Krait CPU event in PMRESR2's group 1 with code 2 - * - * A region (R) corresponds to a piece of the CPU (execution unit, instruction - * unit, etc.) while the event code (CC) corresponds to a particular class of - * events (interrupts for example). An event code is broken down into - * groups (G) that can be mapped into the PMU (irq, fiqs, and irq+fiqs for - * example). - */ - -#define KRAIT_EVENT (1 << 16) -#define VENUM_EVENT (2 << 16) -#define KRAIT_EVENT_MASK (KRAIT_EVENT | VENUM_EVENT) -#define PMRESRn_EN BIT(31) - -#define EVENT_REGION(event) (((event) >> 12) & 0xf) /* R */ -#define EVENT_GROUP(event) ((event) & 0xf) /* G */ -#define EVENT_CODE(event) (((event) >> 4) & 0xff) /* CC */ -#define EVENT_VENUM(event) (!!(event & VENUM_EVENT)) /* N=2 */ -#define EVENT_CPU(event) (!!(event & KRAIT_EVENT)) /* N=1 */ - -static u32 krait_read_pmresrn(int n) -{ - u32 val; - - switch (n) { - case 0: - asm volatile("mrc p15, 1, %0, c9, c15, 0" : "=r" (val)); - break; - case 1: - asm volatile("mrc p15, 1, %0, c9, c15, 1" : "=r" (val)); - break; - case 2: - asm volatile("mrc p15, 1, %0, c9, c15, 2" : "=r" (val)); - break; - default: - BUG(); /* Should be validated in krait_pmu_get_event_idx() */ - } - - return val; -} - -static void krait_write_pmresrn(int n, u32 val) -{ - switch (n) { - case 0: - asm volatile("mcr p15, 1, %0, c9, c15, 0" : : "r" (val)); - break; - case 1: - asm volatile("mcr p15, 1, %0, c9, c15, 1" : : "r" (val)); - break; - case 2: - asm volatile("mcr p15, 1, %0, c9, c15, 2" : : "r" (val)); - break; - default: - BUG(); /* Should be validated in krait_pmu_get_event_idx() */ - } -} - -static u32 venum_read_pmresr(void) -{ - u32 val; - asm volatile("mrc p10, 7, %0, c11, c0, 0" : "=r" (val)); - return val; -} - -static void venum_write_pmresr(u32 val) -{ - asm volatile("mcr p10, 7, %0, c11, c0, 0" : : "r" (val)); -} - -static void venum_pre_pmresr(u32 *venum_orig_val, u32 *fp_orig_val) -{ - u32 venum_new_val; - u32 fp_new_val; - - BUG_ON(preemptible()); - /* CPACR Enable CP10 and CP11 access */ - *venum_orig_val = get_copro_access(); - venum_new_val = *venum_orig_val | CPACC_SVC(10) | CPACC_SVC(11); - set_copro_access(venum_new_val); - - /* Enable FPEXC */ - *fp_orig_val = fmrx(FPEXC); - fp_new_val = *fp_orig_val | FPEXC_EN; - fmxr(FPEXC, fp_new_val); -} - -static void venum_post_pmresr(u32 venum_orig_val, u32 fp_orig_val) -{ - BUG_ON(preemptible()); - /* Restore FPEXC */ - fmxr(FPEXC, fp_orig_val); - isb(); - /* Restore CPACR */ - set_copro_access(venum_orig_val); -} - -static u32 krait_get_pmresrn_event(unsigned int region) -{ - static const u32 pmresrn_table[] = { KRAIT_PMRESR0_GROUP0, - KRAIT_PMRESR1_GROUP0, - KRAIT_PMRESR2_GROUP0 }; - return pmresrn_table[region]; -} - -static void krait_evt_setup(int idx, u32 config_base) -{ - u32 val; - u32 mask; - u32 vval, fval; - unsigned int region = EVENT_REGION(config_base); - unsigned int group = EVENT_GROUP(config_base); - unsigned int code = EVENT_CODE(config_base); - unsigned int group_shift; - bool venum_event = EVENT_VENUM(config_base); - - group_shift = group * 8; - mask = 0xff << group_shift; - - /* Configure evtsel for the region and group */ - if (venum_event) - val = KRAIT_VPMRESR0_GROUP0; - else - val = krait_get_pmresrn_event(region); - val += group; - /* Mix in mode-exclusion bits */ - val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1); - armv7_pmnc_write_evtsel(idx, val); - - if (venum_event) { - venum_pre_pmresr(&vval, &fval); - val = venum_read_pmresr(); - val &= ~mask; - val |= code << group_shift; - val |= PMRESRn_EN; - venum_write_pmresr(val); - venum_post_pmresr(vval, fval); - } else { - val = krait_read_pmresrn(region); - val &= ~mask; - val |= code << group_shift; - val |= PMRESRn_EN; - krait_write_pmresrn(region, val); - } -} - -static u32 clear_pmresrn_group(u32 val, int group) -{ - u32 mask; - int group_shift; - - group_shift = group * 8; - mask = 0xff << group_shift; - val &= ~mask; - - /* Don't clear enable bit if entire region isn't disabled */ - if (val & ~PMRESRn_EN) - return val |= PMRESRn_EN; - - return 0; -} - -static void krait_clearpmu(u32 config_base) -{ - u32 val; - u32 vval, fval; - unsigned int region = EVENT_REGION(config_base); - unsigned int group = EVENT_GROUP(config_base); - bool venum_event = EVENT_VENUM(config_base); - - if (venum_event) { - venum_pre_pmresr(&vval, &fval); - val = venum_read_pmresr(); - val = clear_pmresrn_group(val, group); - venum_write_pmresr(val); - venum_post_pmresr(vval, fval); - } else { - val = krait_read_pmresrn(region); - val = clear_pmresrn_group(val, group); - krait_write_pmresrn(region, val); - } -} - -static void krait_pmu_disable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - /* Disable counter and interrupt */ - - /* Disable counter */ - armv7_pmnc_disable_counter(idx); - - /* - * Clear pmresr code (if destined for PMNx counters) - */ - if (hwc->config_base & KRAIT_EVENT_MASK) - krait_clearpmu(hwc->config_base); - - /* Disable interrupt for this counter */ - armv7_pmnc_disable_intens(idx); -} - -static void krait_pmu_enable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - /* - * Enable counter and interrupt, and set the counter to count - * the event that we're interested in. - */ - - /* Disable counter */ - armv7_pmnc_disable_counter(idx); - - /* - * Set event (if destined for PMNx counters) - * We set the event for the cycle counter because we - * have the ability to perform event filtering. - */ - if (hwc->config_base & KRAIT_EVENT_MASK) - krait_evt_setup(idx, hwc->config_base); - else - armv7_pmnc_write_evtsel(idx, hwc->config_base); - - /* Enable interrupt for this counter */ - armv7_pmnc_enable_intens(idx); - - /* Enable counter */ - armv7_pmnc_enable_counter(idx); -} - -static void krait_pmu_reset(void *info) -{ - u32 vval, fval; - struct arm_pmu *cpu_pmu = info; - u32 idx, nb_cnt = cpu_pmu->num_events; - - armv7pmu_reset(info); - - /* Clear all pmresrs */ - krait_write_pmresrn(0, 0); - krait_write_pmresrn(1, 0); - krait_write_pmresrn(2, 0); - - venum_pre_pmresr(&vval, &fval); - venum_write_pmresr(0); - venum_post_pmresr(vval, fval); - - /* Reset PMxEVNCTCR to sane default */ - for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { - armv7_pmnc_select_counter(idx); - asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); - } - -} - -static int krait_event_to_bit(struct perf_event *event, unsigned int region, - unsigned int group) -{ - int bit; - struct hw_perf_event *hwc = &event->hw; - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - - if (hwc->config_base & VENUM_EVENT) - bit = KRAIT_VPMRESR0_GROUP0; - else - bit = krait_get_pmresrn_event(region); - bit -= krait_get_pmresrn_event(0); - bit += group; - /* - * Lower bits are reserved for use by the counters (see - * armv7pmu_get_event_idx() for more info) - */ - bit += ARMV7_IDX_COUNTER_LAST(cpu_pmu) + 1; - - return bit; -} - -/* - * We check for column exclusion constraints here. - * Two events cant use the same group within a pmresr register. - */ -static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - int idx; - int bit = -1; - struct hw_perf_event *hwc = &event->hw; - unsigned int region = EVENT_REGION(hwc->config_base); - unsigned int code = EVENT_CODE(hwc->config_base); - unsigned int group = EVENT_GROUP(hwc->config_base); - bool venum_event = EVENT_VENUM(hwc->config_base); - bool krait_event = EVENT_CPU(hwc->config_base); - - if (venum_event || krait_event) { - /* Ignore invalid events */ - if (group > 3 || region > 2) - return -EINVAL; - if (venum_event && (code & 0xe0)) - return -EINVAL; - - bit = krait_event_to_bit(event, region, group); - if (test_and_set_bit(bit, cpuc->used_mask)) - return -EAGAIN; - } - - idx = armv7pmu_get_event_idx(cpuc, event); - if (idx < 0 && bit >= 0) - clear_bit(bit, cpuc->used_mask); - - return idx; -} - -static void krait_pmu_clear_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - int bit; - struct hw_perf_event *hwc = &event->hw; - unsigned int region = EVENT_REGION(hwc->config_base); - unsigned int group = EVENT_GROUP(hwc->config_base); - bool venum_event = EVENT_VENUM(hwc->config_base); - bool krait_event = EVENT_CPU(hwc->config_base); - - armv7pmu_clear_event_idx(cpuc, event); - if (venum_event || krait_event) { - bit = krait_event_to_bit(event, region, group); - clear_bit(bit, cpuc->used_mask); - } -} - -static int krait_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_krait"; - /* Some early versions of Krait don't support PC write events */ - if (of_property_read_bool(cpu_pmu->plat_device->dev.of_node, - "qcom,no-pc-write")) - cpu_pmu->map_event = krait_map_event_no_branch; - else - cpu_pmu->map_event = krait_map_event; - cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - cpu_pmu->reset = krait_pmu_reset; - cpu_pmu->enable = krait_pmu_enable_event; - cpu_pmu->disable = krait_pmu_disable_event; - cpu_pmu->get_event_idx = krait_pmu_get_event_idx; - cpu_pmu->clear_event_idx = krait_pmu_clear_event_idx; - return armv7_probe_num_events(cpu_pmu); -} - -/* - * Scorpion Local Performance Monitor Register (LPMn) - * - * 31 30 24 16 8 0 - * +--------------------------------+ - * LPM0 | EN | CC | CC | CC | CC | N = 1, R = 0 - * +--------------------------------+ - * LPM1 | EN | CC | CC | CC | CC | N = 1, R = 1 - * +--------------------------------+ - * LPM2 | EN | CC | CC | CC | CC | N = 1, R = 2 - * +--------------------------------+ - * L2LPM | EN | CC | CC | CC | CC | N = 1, R = 3 - * +--------------------------------+ - * VLPM | EN | CC | CC | CC | CC | N = 2, R = ? - * +--------------------------------+ - * EN | G=3 | G=2 | G=1 | G=0 - * - * - * Event Encoding: - * - * hwc->config_base = 0xNRCCG - * - * N = prefix, 1 for Scorpion CPU (LPMn/L2LPM), 2 for Venum VFP (VLPM) - * R = region register - * CC = class of events the group G is choosing from - * G = group or particular event - * - * Example: 0x12021 is a Scorpion CPU event in LPM2's group 1 with code 2 - * - * A region (R) corresponds to a piece of the CPU (execution unit, instruction - * unit, etc.) while the event code (CC) corresponds to a particular class of - * events (interrupts for example). An event code is broken down into - * groups (G) that can be mapped into the PMU (irq, fiqs, and irq+fiqs for - * example). - */ - -static u32 scorpion_read_pmresrn(int n) -{ - u32 val; - - switch (n) { - case 0: - asm volatile("mrc p15, 0, %0, c15, c0, 0" : "=r" (val)); - break; - case 1: - asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (val)); - break; - case 2: - asm volatile("mrc p15, 2, %0, c15, c0, 0" : "=r" (val)); - break; - case 3: - asm volatile("mrc p15, 3, %0, c15, c2, 0" : "=r" (val)); - break; - default: - BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */ - } - - return val; -} - -static void scorpion_write_pmresrn(int n, u32 val) -{ - switch (n) { - case 0: - asm volatile("mcr p15, 0, %0, c15, c0, 0" : : "r" (val)); - break; - case 1: - asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (val)); - break; - case 2: - asm volatile("mcr p15, 2, %0, c15, c0, 0" : : "r" (val)); - break; - case 3: - asm volatile("mcr p15, 3, %0, c15, c2, 0" : : "r" (val)); - break; - default: - BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */ - } -} - -static u32 scorpion_get_pmresrn_event(unsigned int region) -{ - static const u32 pmresrn_table[] = { SCORPION_LPM0_GROUP0, - SCORPION_LPM1_GROUP0, - SCORPION_LPM2_GROUP0, - SCORPION_L2LPM_GROUP0 }; - return pmresrn_table[region]; -} - -static void scorpion_evt_setup(int idx, u32 config_base) -{ - u32 val; - u32 mask; - u32 vval, fval; - unsigned int region = EVENT_REGION(config_base); - unsigned int group = EVENT_GROUP(config_base); - unsigned int code = EVENT_CODE(config_base); - unsigned int group_shift; - bool venum_event = EVENT_VENUM(config_base); - - group_shift = group * 8; - mask = 0xff << group_shift; - - /* Configure evtsel for the region and group */ - if (venum_event) - val = SCORPION_VLPM_GROUP0; - else - val = scorpion_get_pmresrn_event(region); - val += group; - /* Mix in mode-exclusion bits */ - val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1); - armv7_pmnc_write_evtsel(idx, val); - - asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); - - if (venum_event) { - venum_pre_pmresr(&vval, &fval); - val = venum_read_pmresr(); - val &= ~mask; - val |= code << group_shift; - val |= PMRESRn_EN; - venum_write_pmresr(val); - venum_post_pmresr(vval, fval); - } else { - val = scorpion_read_pmresrn(region); - val &= ~mask; - val |= code << group_shift; - val |= PMRESRn_EN; - scorpion_write_pmresrn(region, val); - } -} - -static void scorpion_clearpmu(u32 config_base) -{ - u32 val; - u32 vval, fval; - unsigned int region = EVENT_REGION(config_base); - unsigned int group = EVENT_GROUP(config_base); - bool venum_event = EVENT_VENUM(config_base); - - if (venum_event) { - venum_pre_pmresr(&vval, &fval); - val = venum_read_pmresr(); - val = clear_pmresrn_group(val, group); - venum_write_pmresr(val); - venum_post_pmresr(vval, fval); - } else { - val = scorpion_read_pmresrn(region); - val = clear_pmresrn_group(val, group); - scorpion_write_pmresrn(region, val); - } -} - -static void scorpion_pmu_disable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - /* Disable counter and interrupt */ - - /* Disable counter */ - armv7_pmnc_disable_counter(idx); - - /* - * Clear pmresr code (if destined for PMNx counters) - */ - if (hwc->config_base & KRAIT_EVENT_MASK) - scorpion_clearpmu(hwc->config_base); - - /* Disable interrupt for this counter */ - armv7_pmnc_disable_intens(idx); -} - -static void scorpion_pmu_enable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - /* - * Enable counter and interrupt, and set the counter to count - * the event that we're interested in. - */ - - /* Disable counter */ - armv7_pmnc_disable_counter(idx); - - /* - * Set event (if destined for PMNx counters) - * We don't set the event for the cycle counter because we - * don't have the ability to perform event filtering. - */ - if (hwc->config_base & KRAIT_EVENT_MASK) - scorpion_evt_setup(idx, hwc->config_base); - else if (idx != ARMV7_IDX_CYCLE_COUNTER) - armv7_pmnc_write_evtsel(idx, hwc->config_base); - - /* Enable interrupt for this counter */ - armv7_pmnc_enable_intens(idx); - - /* Enable counter */ - armv7_pmnc_enable_counter(idx); -} - -static void scorpion_pmu_reset(void *info) -{ - u32 vval, fval; - struct arm_pmu *cpu_pmu = info; - u32 idx, nb_cnt = cpu_pmu->num_events; - - armv7pmu_reset(info); - - /* Clear all pmresrs */ - scorpion_write_pmresrn(0, 0); - scorpion_write_pmresrn(1, 0); - scorpion_write_pmresrn(2, 0); - scorpion_write_pmresrn(3, 0); - - venum_pre_pmresr(&vval, &fval); - venum_write_pmresr(0); - venum_post_pmresr(vval, fval); - - /* Reset PMxEVNCTCR to sane default */ - for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { - armv7_pmnc_select_counter(idx); - asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); - } -} - -static int scorpion_event_to_bit(struct perf_event *event, unsigned int region, - unsigned int group) -{ - int bit; - struct hw_perf_event *hwc = &event->hw; - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - - if (hwc->config_base & VENUM_EVENT) - bit = SCORPION_VLPM_GROUP0; - else - bit = scorpion_get_pmresrn_event(region); - bit -= scorpion_get_pmresrn_event(0); - bit += group; - /* - * Lower bits are reserved for use by the counters (see - * armv7pmu_get_event_idx() for more info) - */ - bit += ARMV7_IDX_COUNTER_LAST(cpu_pmu) + 1; - - return bit; -} - -/* - * We check for column exclusion constraints here. - * Two events cant use the same group within a pmresr register. - */ -static int scorpion_pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - int idx; - int bit = -1; - struct hw_perf_event *hwc = &event->hw; - unsigned int region = EVENT_REGION(hwc->config_base); - unsigned int group = EVENT_GROUP(hwc->config_base); - bool venum_event = EVENT_VENUM(hwc->config_base); - bool scorpion_event = EVENT_CPU(hwc->config_base); - - if (venum_event || scorpion_event) { - /* Ignore invalid events */ - if (group > 3 || region > 3) - return -EINVAL; - - bit = scorpion_event_to_bit(event, region, group); - if (test_and_set_bit(bit, cpuc->used_mask)) - return -EAGAIN; - } - - idx = armv7pmu_get_event_idx(cpuc, event); - if (idx < 0 && bit >= 0) - clear_bit(bit, cpuc->used_mask); - - return idx; -} - -static void scorpion_pmu_clear_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - int bit; - struct hw_perf_event *hwc = &event->hw; - unsigned int region = EVENT_REGION(hwc->config_base); - unsigned int group = EVENT_GROUP(hwc->config_base); - bool venum_event = EVENT_VENUM(hwc->config_base); - bool scorpion_event = EVENT_CPU(hwc->config_base); - - armv7pmu_clear_event_idx(cpuc, event); - if (venum_event || scorpion_event) { - bit = scorpion_event_to_bit(event, region, group); - clear_bit(bit, cpuc->used_mask); - } -} - -static int scorpion_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_scorpion"; - cpu_pmu->map_event = scorpion_map_event; - cpu_pmu->reset = scorpion_pmu_reset; - cpu_pmu->enable = scorpion_pmu_enable_event; - cpu_pmu->disable = scorpion_pmu_disable_event; - cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; - cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; - return armv7_probe_num_events(cpu_pmu); -} - -static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) -{ - armv7pmu_init(cpu_pmu); - cpu_pmu->name = "armv7_scorpion_mp"; - cpu_pmu->map_event = scorpion_map_event; - cpu_pmu->reset = scorpion_pmu_reset; - cpu_pmu->enable = scorpion_pmu_enable_event; - cpu_pmu->disable = scorpion_pmu_disable_event; - cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; - cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; - return armv7_probe_num_events(cpu_pmu); -} - -static const struct of_device_id armv7_pmu_of_device_ids[] = { - {.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init}, - {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, - {.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init}, - {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, - {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init}, - {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, - {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, - {.compatible = "qcom,krait-pmu", .data = krait_pmu_init}, - {.compatible = "qcom,scorpion-pmu", .data = scorpion_pmu_init}, - {.compatible = "qcom,scorpion-mp-pmu", .data = scorpion_mp_pmu_init}, - {}, -}; - -static const struct pmu_probe_info armv7_pmu_probe_table[] = { - ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A8, armv7_a8_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A9, armv7_a9_pmu_init), - { /* sentinel value */ } -}; - - -static int armv7_pmu_device_probe(struct platform_device *pdev) -{ - return arm_pmu_device_probe(pdev, armv7_pmu_of_device_ids, - armv7_pmu_probe_table); -} - -static struct platform_driver armv7_pmu_driver = { - .driver = { - .name = "armv7-pmu", - .of_match_table = armv7_pmu_of_device_ids, - .suppress_bind_attrs = true, - }, - .probe = armv7_pmu_device_probe, -}; - -builtin_platform_driver(armv7_pmu_driver); -#endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c deleted file mode 100644 index 7a2ba1c689a7..000000000000 --- a/arch/arm/kernel/perf_event_xscale.c +++ /dev/null @@ -1,748 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARMv5 [xscale] Performance counter handling code. - * - * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com> - * - * Based on the previous xscale OProfile code. - * - * There are two variants of the xscale PMU that we support: - * - xscale1pmu: 2 event counters and a cycle counter - * - xscale2pmu: 4 event counters and a cycle counter - * The two variants share event definitions, but have different - * PMU structures. - */ - -#ifdef CONFIG_CPU_XSCALE - -#include <asm/cputype.h> -#include <asm/irq_regs.h> - -#include <linux/of.h> -#include <linux/perf/arm_pmu.h> -#include <linux/platform_device.h> - -enum xscale_perf_types { - XSCALE_PERFCTR_ICACHE_MISS = 0x00, - XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, - XSCALE_PERFCTR_DATA_STALL = 0x02, - XSCALE_PERFCTR_ITLB_MISS = 0x03, - XSCALE_PERFCTR_DTLB_MISS = 0x04, - XSCALE_PERFCTR_BRANCH = 0x05, - XSCALE_PERFCTR_BRANCH_MISS = 0x06, - XSCALE_PERFCTR_INSTRUCTION = 0x07, - XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, - XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, - XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, - XSCALE_PERFCTR_DCACHE_MISS = 0x0B, - XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, - XSCALE_PERFCTR_PC_CHANGED = 0x0D, - XSCALE_PERFCTR_BCU_REQUEST = 0x10, - XSCALE_PERFCTR_BCU_FULL = 0x11, - XSCALE_PERFCTR_BCU_DRAIN = 0x12, - XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, - XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, - XSCALE_PERFCTR_RMW = 0x16, - /* XSCALE_PERFCTR_CCNT is not hardware defined */ - XSCALE_PERFCTR_CCNT = 0xFE, - XSCALE_PERFCTR_UNUSED = 0xFF, -}; - -enum xscale_counters { - XSCALE_CYCLE_COUNTER = 0, - XSCALE_COUNTER0, - XSCALE_COUNTER1, - XSCALE_COUNTER2, - XSCALE_COUNTER3, -}; - -static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, - [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, - [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER, -}; - -static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, -}; - -#define XSCALE_PMU_ENABLE 0x001 -#define XSCALE_PMN_RESET 0x002 -#define XSCALE_CCNT_RESET 0x004 -#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) -#define XSCALE_PMU_CNT64 0x008 - -#define XSCALE1_OVERFLOWED_MASK 0x700 -#define XSCALE1_CCOUNT_OVERFLOW 0x400 -#define XSCALE1_COUNT0_OVERFLOW 0x100 -#define XSCALE1_COUNT1_OVERFLOW 0x200 -#define XSCALE1_CCOUNT_INT_EN 0x040 -#define XSCALE1_COUNT0_INT_EN 0x010 -#define XSCALE1_COUNT1_INT_EN 0x020 -#define XSCALE1_COUNT0_EVT_SHFT 12 -#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) -#define XSCALE1_COUNT1_EVT_SHFT 20 -#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) - -static inline u32 -xscale1pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); - return val; -} - -static inline void -xscale1pmu_write_pmnc(u32 val) -{ - /* upper 4bits and 7, 11 are write-as-0 */ - val &= 0xffff77f; - asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); -} - -static inline int -xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = pmnc & XSCALE1_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = pmnc & XSCALE1_COUNT1_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale1pmu_handle_irq(struct arm_pmu *cpu_pmu) -{ - unsigned long pmnc; - struct perf_sample_data data; - struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); - struct pt_regs *regs; - int idx; - - /* - * NOTE: there's an A stepping erratum that states if an overflow - * bit already exists and another occurs, the previous - * Overflow bit gets cleared. There's no workaround. - * Fixed in B stepping or later. - */ - pmnc = xscale1pmu_read_pmnc(); - - /* - * Write the value back to clear the overflow flags. Overflow - * flags remain in pmnc for use below. We also disable the PMU - * while we process the interrupt. - */ - xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) - return IRQ_NONE; - - regs = get_irq_regs(); - - for (idx = 0; idx < cpu_pmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!event) - continue; - - if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event); - perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event)) - continue; - - if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(event); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void xscale1pmu_enable_event(struct perf_event *event) -{ - unsigned long val, mask, evt; - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = 0; - evt = XSCALE1_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | - XSCALE1_COUNT0_INT_EN; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | - XSCALE1_COUNT1_INT_EN; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); -} - -static void xscale1pmu_disable_event(struct perf_event *event) -{ - unsigned long val, mask, evt; - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = XSCALE1_CCOUNT_INT_EN; - evt = 0; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); -} - -static int -xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - if (XSCALE_PERFCTR_CCNT == hwc->config_base) { - if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return XSCALE_CYCLE_COUNTER; - } else { - if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) - return XSCALE_COUNTER1; - - if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) - return XSCALE_COUNTER0; - - return -EAGAIN; - } -} - -static void xscalepmu_clear_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - clear_bit(event->hw.idx, cpuc->used_mask); -} - -static void xscale1pmu_start(struct arm_pmu *cpu_pmu) -{ - unsigned long val; - - val = xscale1pmu_read_pmnc(); - val |= XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); -} - -static void xscale1pmu_stop(struct arm_pmu *cpu_pmu) -{ - unsigned long val; - - val = xscale1pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); -} - -static inline u64 xscale1pmu_read_counter(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int counter = hwc->idx; - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void xscale1pmu_write_counter(struct perf_event *event, u64 val) -{ - struct hw_perf_event *hwc = &event->hw; - int counter = hwc->idx; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); - break; - } -} - -static int xscale_map_event(struct perf_event *event) -{ - return armpmu_map_event(event, &xscale_perf_map, - &xscale_perf_cache_map, 0xFF); -} - -static int xscale1pmu_init(struct arm_pmu *cpu_pmu) -{ - cpu_pmu->name = "armv5_xscale1"; - cpu_pmu->handle_irq = xscale1pmu_handle_irq; - cpu_pmu->enable = xscale1pmu_enable_event; - cpu_pmu->disable = xscale1pmu_disable_event; - cpu_pmu->read_counter = xscale1pmu_read_counter; - cpu_pmu->write_counter = xscale1pmu_write_counter; - cpu_pmu->get_event_idx = xscale1pmu_get_event_idx; - cpu_pmu->clear_event_idx = xscalepmu_clear_event_idx; - cpu_pmu->start = xscale1pmu_start; - cpu_pmu->stop = xscale1pmu_stop; - cpu_pmu->map_event = xscale_map_event; - cpu_pmu->num_events = 3; - - return 0; -} - -#define XSCALE2_OVERFLOWED_MASK 0x01f -#define XSCALE2_CCOUNT_OVERFLOW 0x001 -#define XSCALE2_COUNT0_OVERFLOW 0x002 -#define XSCALE2_COUNT1_OVERFLOW 0x004 -#define XSCALE2_COUNT2_OVERFLOW 0x008 -#define XSCALE2_COUNT3_OVERFLOW 0x010 -#define XSCALE2_CCOUNT_INT_EN 0x001 -#define XSCALE2_COUNT0_INT_EN 0x002 -#define XSCALE2_COUNT1_INT_EN 0x004 -#define XSCALE2_COUNT2_INT_EN 0x008 -#define XSCALE2_COUNT3_INT_EN 0x010 -#define XSCALE2_COUNT0_EVT_SHFT 0 -#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) -#define XSCALE2_COUNT1_EVT_SHFT 8 -#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) -#define XSCALE2_COUNT2_EVT_SHFT 16 -#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) -#define XSCALE2_COUNT3_EVT_SHFT 24 -#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) - -static inline u32 -xscale2pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); - /* bits 1-2 and 4-23 are read-unpredictable */ - return val & 0xff000009; -} - -static inline void -xscale2pmu_write_pmnc(u32 val) -{ - /* bits 4-23 are write-as-0, 24-31 are write ignored */ - val &= 0xf; - asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_overflow_flags(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_overflow_flags(u32 val) -{ - asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_event_select(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_event_select(u32 val) -{ - asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); -} - -static inline u32 -xscale2pmu_read_int_enable(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); - return val; -} - -static void -xscale2pmu_write_int_enable(u32 val) -{ - asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); -} - -static inline int -xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = of_flags & XSCALE2_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = of_flags & XSCALE2_COUNT1_OVERFLOW; - break; - case XSCALE_COUNTER2: - ret = of_flags & XSCALE2_COUNT2_OVERFLOW; - break; - case XSCALE_COUNTER3: - ret = of_flags & XSCALE2_COUNT3_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale2pmu_handle_irq(struct arm_pmu *cpu_pmu) -{ - unsigned long pmnc, of_flags; - struct perf_sample_data data; - struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); - struct pt_regs *regs; - int idx; - - /* Disable the PMU. */ - pmnc = xscale2pmu_read_pmnc(); - xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - /* Check the overflow flag register. */ - of_flags = xscale2pmu_read_overflow_flags(); - if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) - return IRQ_NONE; - - /* Clear the overflow bits. */ - xscale2pmu_write_overflow_flags(of_flags); - - regs = get_irq_regs(); - - for (idx = 0; idx < cpu_pmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!event) - continue; - - if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event); - perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event)) - continue; - - if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(event); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void xscale2pmu_enable_event(struct perf_event *event) -{ - unsigned long ien, evtsel; - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien |= XSCALE2_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - ien |= XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - ien |= XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; - break; - case XSCALE_COUNTER2: - ien |= XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; - break; - case XSCALE_COUNTER3: - ien |= XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); -} - -static void xscale2pmu_disable_event(struct perf_event *event) -{ - unsigned long ien, evtsel, of_flags; - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien &= ~XSCALE2_CCOUNT_INT_EN; - of_flags = XSCALE2_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ien &= ~XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; - of_flags = XSCALE2_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ien &= ~XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; - of_flags = XSCALE2_COUNT1_OVERFLOW; - break; - case XSCALE_COUNTER2: - ien &= ~XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; - of_flags = XSCALE2_COUNT2_OVERFLOW; - break; - case XSCALE_COUNTER3: - ien &= ~XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; - of_flags = XSCALE2_COUNT3_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); - xscale2pmu_write_overflow_flags(of_flags); -} - -static int -xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - int idx = xscale1pmu_get_event_idx(cpuc, event); - if (idx >= 0) - goto out; - - if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) - idx = XSCALE_COUNTER3; - else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) - idx = XSCALE_COUNTER2; -out: - return idx; -} - -static void xscale2pmu_start(struct arm_pmu *cpu_pmu) -{ - unsigned long val; - - val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; - val |= XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); -} - -static void xscale2pmu_stop(struct arm_pmu *cpu_pmu) -{ - unsigned long val; - - val = xscale2pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); -} - -static inline u64 xscale2pmu_read_counter(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int counter = hwc->idx; - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void xscale2pmu_write_counter(struct perf_event *event, u64 val) -{ - struct hw_perf_event *hwc = &event->hw; - int counter = hwc->idx; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); - break; - } -} - -static int xscale2pmu_init(struct arm_pmu *cpu_pmu) -{ - cpu_pmu->name = "armv5_xscale2"; - cpu_pmu->handle_irq = xscale2pmu_handle_irq; - cpu_pmu->enable = xscale2pmu_enable_event; - cpu_pmu->disable = xscale2pmu_disable_event; - cpu_pmu->read_counter = xscale2pmu_read_counter; - cpu_pmu->write_counter = xscale2pmu_write_counter; - cpu_pmu->get_event_idx = xscale2pmu_get_event_idx; - cpu_pmu->clear_event_idx = xscalepmu_clear_event_idx; - cpu_pmu->start = xscale2pmu_start; - cpu_pmu->stop = xscale2pmu_stop; - cpu_pmu->map_event = xscale_map_event; - cpu_pmu->num_events = 5; - - return 0; -} - -static const struct pmu_probe_info xscale_pmu_probe_table[] = { - XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V1, xscale1pmu_init), - XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V2, xscale2pmu_init), - { /* sentinel value */ } -}; - -static int xscale_pmu_device_probe(struct platform_device *pdev) -{ - return arm_pmu_device_probe(pdev, NULL, xscale_pmu_probe_table); -} - -static struct platform_driver xscale_pmu_driver = { - .driver = { - .name = "xscale-pmu", - }, - .probe = xscale_pmu_device_probe, -}; - -builtin_platform_driver(xscale_pmu_driver); -#endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index d4392e177484..3bb0c4dcfc5c 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -45,8 +45,15 @@ extern void secondary_startup(void); static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle) { if (psci_ops.cpu_on) +#ifdef CONFIG_XIP_KERNEL + return psci_ops.cpu_on(cpu_logical_map(cpu), + ((phys_addr_t)(&secondary_startup) + - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + + CONFIG_XIP_PHYS_ADDR)); +#else return psci_ops.cpu_on(cpu_logical_map(cpu), virt_to_idmap(&secondary_startup)); +#endif return -ENODEV; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7b33b157fca0..a41c93988d2c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -880,10 +880,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) */ boot_alias_start = phys_to_idmap(start); if (arm_has_idmap_alias() && boot_alias_start != IDMAP_INVALID_ADDR) { - res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES); - if (!res) - panic("%s: Failed to allocate %zu bytes\n", - __func__, sizeof(*res)); + res = memblock_alloc_or_panic(sizeof(*res), SMP_CACHE_BYTES); res->name = "System RAM (boot alias)"; res->start = boot_alias_start; res->end = phys_to_idmap(res_end); @@ -891,10 +888,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) request_resource(&iomem_resource, res); } - res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES); - if (!res) - panic("%s: Failed to allocate %zu bytes\n", __func__, - sizeof(*res)); + res = memblock_alloc_or_panic(sizeof(*res), SMP_CACHE_BYTES); res->name = "System RAM"; res->start = start; res->end = res_end; @@ -1201,20 +1195,10 @@ void __init setup_arch(char **cmdline_p) mdesc->init_early(); } - -static int __init topology_init(void) +bool arch_cpu_is_hotpluggable(int num) { - int cpu; - - for_each_possible_cpu(cpu) { - struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu); - cpuinfo->cpu.hotpluggable = platform_can_hotplug_cpu(cpu); - register_cpu(&cpuinfo->cpu, cpu); - } - - return 0; + return platform_can_hotplug_cpu(num); } -subsys_initcall(topology_init); #ifdef CONFIG_HAVE_PROC_CPU static int __init proc_cpu_init(void) diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index a86a1d4f3461..93afd1005b43 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -127,6 +127,10 @@ cpu_resume_after_mmu: instr_sync #endif bl cpu_init @ restore the und/abt/irq banked regs +#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK) + mov r0, sp + bl kasan_unpoison_task_stack_below +#endif mov r0, #0 @ return zero on success ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 3431c0553f45..50999886a8b5 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -551,7 +551,8 @@ void show_ipi_list(struct seq_file *p, int prec) if (!ipi_desc[i]) continue; - seq_printf(p, "%*s%u: ", prec - 1, "IPI", i); + seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i, + prec >= 4 ? " " : ""); for_each_online_cpu(cpu) seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu)); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 9a14f721a2b0..42a3706e16a6 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -93,7 +93,6 @@ static void twd_timer_stop(void) { struct clock_event_device *clk = raw_cpu_ptr(twd_evt); - twd_shutdown(clk); disable_percpu_irq(clk->irq); } diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index c3ec3861dd07..58a6441b58c4 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -12,6 +12,7 @@ #include <asm/smp_plat.h> #include <asm/suspend.h> #include <asm/tlbflush.h> +#include <asm/uaccess.h> extern int __cpu_suspend(unsigned long, int (*)(unsigned long), u32 cpuid); extern void cpu_resume_mmu(void); @@ -27,6 +28,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) return -EINVAL; /* + * Needed for the MMU disabling/enabing code to be able to run from + * TTBR0 addresses. + */ + if (IS_ENABLED(CONFIG_CPU_TTBR0_PAN)) + uaccess_save_and_enable(); + + /* * Function graph tracer state gets incosistent when the kernel * calls functions that never return (aka suspend finishers) hence * disable graph tracing during their execution. diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index d00f4040a9f5..2944721e82a2 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -235,23 +235,23 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; - struct fd f = fdget_raw(fd); + CLASS(fd_raw, f)(fd); struct flock64 flock; - long err = -EBADF; + long err; - if (!f.file) - goto out; + if (fd_empty(f)) + return -EBADF; switch (cmd) { case F_GETLK64: case F_OFD_GETLK: - err = security_file_fcntl(f.file, cmd, arg); + err = security_file_fcntl(fd_file(f), cmd, arg); if (err) break; err = get_oabi_flock(&flock, argp); if (err) break; - err = fcntl_getlk64(f.file, cmd, &flock); + err = fcntl_getlk64(fd_file(f), cmd, &flock); if (!err) err = put_oabi_flock(&flock, argp); break; @@ -259,20 +259,18 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, case F_SETLKW64: case F_OFD_SETLK: case F_OFD_SETLKW: - err = security_file_fcntl(f.file, cmd, arg); + err = security_file_fcntl(fd_file(f), cmd, arg); if (err) break; err = get_oabi_flock(&flock, argp); if (err) break; - err = fcntl_setlk64(fd, f.file, cmd, &flock); + err = fcntl_setlk64(fd, fd_file(f), cmd, &flock); break; default: err = sys_fcntl64(fd, cmd, arg); break; } - fdput(f); -out: return err; } diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index ef0058de432b..2336ee2aa44a 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -42,7 +42,7 @@ * can take this difference into account during load balance. A per cpu * structure is preferred because each CPU updates its own cpu_capacity field * during the load balance except for idle cores. One idle core is selected - * to run the rebalance_domains for all idle cores and the cpu_capacity can be + * to run the sched_balance_domains for all idle cores and the cpu_capacity can be * updated during this sequence. */ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 72c82a4d63ac..afbd2ebe5c39 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -26,6 +26,7 @@ #include <linux/sched/debug.h> #include <linux/sched/task_stack.h> #include <linux/irq.h> +#include <linux/vmalloc.h> #include <linux/atomic.h> #include <asm/cacheflush.h> @@ -257,13 +258,6 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl) barrier(); } -#ifdef CONFIG_PREEMPT -#define S_PREEMPT " PREEMPT" -#elif defined(CONFIG_PREEMPT_RT) -#define S_PREEMPT " PREEMPT_RT" -#else -#define S_PREEMPT "" -#endif #ifdef CONFIG_SMP #define S_SMP " SMP" #else @@ -281,8 +275,8 @@ static int __die(const char *str, int err, struct pt_regs *regs) static int die_counter; int ret; - pr_emerg("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP S_ISA "\n", - str, err, ++die_counter); + pr_emerg("Internal error: %s: %x [#%d]" S_SMP S_ISA "\n", + str, err, ++die_counter); /* trap and error numbers are mostly meaningless on ARM */ ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV); @@ -569,6 +563,7 @@ static int bad_syscall(int n, struct pt_regs *regs) static inline int __do_cache_op(unsigned long start, unsigned long end) { + unsigned int ua_flags; int ret; do { @@ -577,7 +572,9 @@ __do_cache_op(unsigned long start, unsigned long end) if (fatal_signal_pending(current)) return 0; + ua_flags = uaccess_save_and_enable(); ret = flush_icache_user_range(start, start + chunk); + uaccess_restore(ua_flags); if (ret) return ret; diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index d499ad461b00..325448ffbba0 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -7,6 +7,7 @@ */ #include <linux/cache.h> +#include <linux/vdso_datastore.h> #include <linux/elf.h> #include <linux/err.h> #include <linux/kernel.h> @@ -14,7 +15,6 @@ #include <linux/of.h> #include <linux/printk.h> #include <linux/slab.h> -#include <linux/timekeeper_internal.h> #include <linux/vmalloc.h> #include <asm/arch_timer.h> #include <asm/barrier.h> @@ -34,15 +34,6 @@ extern char vdso_start[], vdso_end[]; /* Total number of pages needed for the data and text portions of the VDSO. */ unsigned int vdso_total_pages __ro_after_init; -static union vdso_data_store vdso_data_store __page_aligned_data; -struct vdso_data *vdso_data = vdso_data_store.data; - -static struct page *vdso_data_page __ro_after_init; -static const struct vm_special_mapping vdso_data_mapping = { - .name = "[vvar]", - .pages = &vdso_data_page, -}; - static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struct *new_vma) { @@ -193,9 +184,6 @@ static int __init vdso_init(void) if (vdso_text_pagelist == NULL) return -ENOMEM; - /* Grab the VDSO data page. */ - vdso_data_page = virt_to_page(vdso_data); - /* Grab the VDSO text pages. */ for (i = 0; i < text_pages; i++) { struct page *page; @@ -206,7 +194,7 @@ static int __init vdso_init(void) vdso_text_mapping.pages = vdso_text_pagelist; - vdso_total_pages = 1; /* for the data/vvar page */ + vdso_total_pages = VDSO_NR_PAGES; /* for the data/vvar pages */ vdso_total_pages += text_pages; cntvct_ok = cntvct_functional(); @@ -217,16 +205,7 @@ static int __init vdso_init(void) } arch_initcall(vdso_init); -static int install_vvar(struct mm_struct *mm, unsigned long addr) -{ - struct vm_area_struct *vma; - - vma = _install_special_mapping(mm, addr, PAGE_SIZE, - VM_READ | VM_MAYREAD, - &vdso_data_mapping); - - return PTR_ERR_OR_ZERO(vma); -} +static_assert(__VDSO_PAGES == VDSO_NR_PAGES); /* assumes mmap_lock is write-locked */ void arm_install_vdso(struct mm_struct *mm, unsigned long addr) @@ -239,12 +218,12 @@ void arm_install_vdso(struct mm_struct *mm, unsigned long addr) if (vdso_text_pagelist == NULL) return; - if (install_vvar(mm, addr)) + if (IS_ERR(vdso_install_vvar_mapping(mm, addr))) return; - /* Account for vvar page. */ - addr += PAGE_SIZE; - len = (vdso_total_pages - 1) << PAGE_SHIFT; + /* Account for vvar pages. */ + addr += VDSO_NR_PAGES * PAGE_SIZE; + len = (vdso_total_pages - VDSO_NR_PAGES) << PAGE_SHIFT; vma = _install_special_mapping(mm, addr, len, VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index c16d196b5aad..f2e8d4fac068 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -83,7 +83,7 @@ SECTIONS } .init.arch.info : { __arch_info_begin = .; - *(.arch.info.init) + KEEP(*(.arch.info.init)) __arch_info_end = .; } .init.tagtable : { diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bd9127c4b451..d592a203f9c6 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -99,7 +99,7 @@ SECTIONS } .init.arch.info : { __arch_info_begin = .; - *(.arch.info.init) + KEEP(*(.arch.info.init)) __arch_info_end = .; } .init.tagtable : { @@ -116,7 +116,7 @@ SECTIONS #endif .init.pv_table : { __pv_table_begin = .; - *(.pv_table) + KEEP(*(.pv_table)) __pv_table_end = .; } diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 650404be6768..007874320937 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -40,9 +40,14 @@ $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S ifeq ($(CONFIG_KERNEL_MODE_NEON),y) - NEON_FLAGS := -march=armv7-a -mfloat-abi=softfp -mfpu=neon - CFLAGS_xor-neon.o += $(NEON_FLAGS) + CFLAGS_xor-neon.o += $(CC_FLAGS_FPU) obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o endif obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o + +obj-$(CONFIG_CRC32_ARCH) += crc32-arm.o +crc32-arm-y := crc32-glue.o crc32-core.o + +obj-$(CONFIG_CRC_T10DIF_ARCH) += crc-t10dif-arm.o +crc-t10dif-arm-y := crc-t10dif-glue.o crc-t10dif-core.o diff --git a/arch/arm/crypto/crct10dif-ce-core.S b/arch/arm/lib/crc-t10dif-core.S index 46c02c518a30..2bbf2df9c1e2 100644 --- a/arch/arm/crypto/crct10dif-ce-core.S +++ b/arch/arm/lib/crc-t10dif-core.S @@ -112,55 +112,120 @@ FOLD_CONST_L .req q10l FOLD_CONST_H .req q10h + /* + * Pairwise long polynomial multiplication of two 16-bit values + * + * { w0, w1 }, { y0, y1 } + * + * by two 64-bit values + * + * { x0, x1, x2, x3, x4, x5, x6, x7 }, { z0, z1, z2, z3, z4, z5, z6, z7 } + * + * where each vector element is a byte, ordered from least to most + * significant. The resulting 80-bit vectors are XOR'ed together. + * + * This can be implemented using 8x8 long polynomial multiplication, by + * reorganizing the input so that each pairwise 8x8 multiplication + * produces one of the terms from the decomposition below, and + * combining the results of each rank and shifting them into place. + * + * Rank + * 0 w0*x0 ^ | y0*z0 ^ + * 1 (w0*x1 ^ w1*x0) << 8 ^ | (y0*z1 ^ y1*z0) << 8 ^ + * 2 (w0*x2 ^ w1*x1) << 16 ^ | (y0*z2 ^ y1*z1) << 16 ^ + * 3 (w0*x3 ^ w1*x2) << 24 ^ | (y0*z3 ^ y1*z2) << 24 ^ + * 4 (w0*x4 ^ w1*x3) << 32 ^ | (y0*z4 ^ y1*z3) << 32 ^ + * 5 (w0*x5 ^ w1*x4) << 40 ^ | (y0*z5 ^ y1*z4) << 40 ^ + * 6 (w0*x6 ^ w1*x5) << 48 ^ | (y0*z6 ^ y1*z5) << 48 ^ + * 7 (w0*x7 ^ w1*x6) << 56 ^ | (y0*z7 ^ y1*z6) << 56 ^ + * 8 w1*x7 << 64 | y1*z7 << 64 + * + * The inputs can be reorganized into + * + * { w0, w0, w0, w0, y0, y0, y0, y0 }, { w1, w1, w1, w1, y1, y1, y1, y1 } + * { x0, x2, x4, x6, z0, z2, z4, z6 }, { x1, x3, x5, x7, z1, z3, z5, z7 } + * + * and after performing 8x8->16 bit long polynomial multiplication of + * each of the halves of the first vector with those of the second one, + * we obtain the following four vectors of 16-bit elements: + * + * a := { w0*x0, w0*x2, w0*x4, w0*x6 }, { y0*z0, y0*z2, y0*z4, y0*z6 } + * b := { w0*x1, w0*x3, w0*x5, w0*x7 }, { y0*z1, y0*z3, y0*z5, y0*z7 } + * c := { w1*x0, w1*x2, w1*x4, w1*x6 }, { y1*z0, y1*z2, y1*z4, y1*z6 } + * d := { w1*x1, w1*x3, w1*x5, w1*x7 }, { y1*z1, y1*z3, y1*z5, y1*z7 } + * + * Results b and c can be XORed together, as the vector elements have + * matching ranks. Then, the final XOR can be pulled forward, and + * applied between the halves of each of the remaining three vectors, + * which are then shifted into place, and XORed together to produce the + * final 80-bit result. + */ + .macro pmull16x64_p8, v16, v64 + vext.8 q11, \v64, \v64, #1 + vld1.64 {q12}, [r4, :128] + vuzp.8 q11, \v64 + vtbl.8 d24, {\v16\()_L-\v16\()_H}, d24 + vtbl.8 d25, {\v16\()_L-\v16\()_H}, d25 + bl __pmull16x64_p8 + veor \v64, q12, q14 + .endm + +__pmull16x64_p8: + vmull.p8 q13, d23, d24 + vmull.p8 q14, d23, d25 + vmull.p8 q15, d22, d24 + vmull.p8 q12, d22, d25 + + veor q14, q14, q15 + veor d24, d24, d25 + veor d26, d26, d27 + veor d28, d28, d29 + vmov.i32 d25, #0 + vmov.i32 d29, #0 + vext.8 q12, q12, q12, #14 + vext.8 q14, q14, q14, #15 + veor d24, d24, d26 + bx lr +ENDPROC(__pmull16x64_p8) + + .macro pmull16x64_p64, v16, v64 + vmull.p64 q11, \v64\()l, \v16\()_L + vmull.p64 \v64, \v64\()h, \v16\()_H + veor \v64, \v64, q11 + .endm + // Fold reg1, reg2 into the next 32 data bytes, storing the result back // into reg1, reg2. - .macro fold_32_bytes, reg1, reg2 - vld1.64 {q11-q12}, [buf]! + .macro fold_32_bytes, reg1, reg2, p + vld1.64 {q8-q9}, [buf]! - vmull.p64 q8, \reg1\()h, FOLD_CONST_H - vmull.p64 \reg1, \reg1\()l, FOLD_CONST_L - vmull.p64 q9, \reg2\()h, FOLD_CONST_H - vmull.p64 \reg2, \reg2\()l, FOLD_CONST_L + pmull16x64_\p FOLD_CONST, \reg1 + pmull16x64_\p FOLD_CONST, \reg2 -CPU_LE( vrev64.8 q11, q11 ) -CPU_LE( vrev64.8 q12, q12 ) - vswp q11l, q11h - vswp q12l, q12h +CPU_LE( vrev64.8 q8, q8 ) +CPU_LE( vrev64.8 q9, q9 ) + vswp q8l, q8h + vswp q9l, q9h veor.8 \reg1, \reg1, q8 veor.8 \reg2, \reg2, q9 - veor.8 \reg1, \reg1, q11 - veor.8 \reg2, \reg2, q12 .endm // Fold src_reg into dst_reg, optionally loading the next fold constants - .macro fold_16_bytes, src_reg, dst_reg, load_next_consts - vmull.p64 q8, \src_reg\()l, FOLD_CONST_L - vmull.p64 \src_reg, \src_reg\()h, FOLD_CONST_H + .macro fold_16_bytes, src_reg, dst_reg, p, load_next_consts + pmull16x64_\p FOLD_CONST, \src_reg .ifnb \load_next_consts vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! .endif - veor.8 \dst_reg, \dst_reg, q8 veor.8 \dst_reg, \dst_reg, \src_reg .endm - .macro __adrl, out, sym - movw \out, #:lower16:\sym - movt \out, #:upper16:\sym - .endm - -// -// u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len); -// -// Assumes len >= 16. -// -ENTRY(crc_t10dif_pmull) - + .macro crct10dif, p // For sizes less than 256 bytes, we can't fold 128 bytes at a time. cmp len, #256 - blt .Lless_than_256_bytes + blt .Lless_than_256_bytes\@ - __adrl fold_consts_ptr, .Lfold_across_128_bytes_consts + mov_l fold_consts_ptr, .Lfold_across_128_bytes_consts // Load the first 128 data bytes. Byte swapping is necessary to make // the bit order match the polynomial coefficient order. @@ -199,27 +264,27 @@ CPU_LE( vrev64.8 q7, q7 ) // While >= 128 data bytes remain (not counting q0-q7), fold the 128 // bytes q0-q7 into them, storing the result back into q0-q7. -.Lfold_128_bytes_loop: - fold_32_bytes q0, q1 - fold_32_bytes q2, q3 - fold_32_bytes q4, q5 - fold_32_bytes q6, q7 +.Lfold_128_bytes_loop\@: + fold_32_bytes q0, q1, \p + fold_32_bytes q2, q3, \p + fold_32_bytes q4, q5, \p + fold_32_bytes q6, q7, \p subs len, len, #128 - bge .Lfold_128_bytes_loop + bge .Lfold_128_bytes_loop\@ // Now fold the 112 bytes in q0-q6 into the 16 bytes in q7. // Fold across 64 bytes. vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! - fold_16_bytes q0, q4 - fold_16_bytes q1, q5 - fold_16_bytes q2, q6 - fold_16_bytes q3, q7, 1 + fold_16_bytes q0, q4, \p + fold_16_bytes q1, q5, \p + fold_16_bytes q2, q6, \p + fold_16_bytes q3, q7, \p, 1 // Fold across 32 bytes. - fold_16_bytes q4, q6 - fold_16_bytes q5, q7, 1 + fold_16_bytes q4, q6, \p + fold_16_bytes q5, q7, \p, 1 // Fold across 16 bytes. - fold_16_bytes q6, q7 + fold_16_bytes q6, q7, \p // Add 128 to get the correct number of data bytes remaining in 0...127 // (not counting q7), following the previous extra subtraction by 128. @@ -229,25 +294,23 @@ CPU_LE( vrev64.8 q7, q7 ) // While >= 16 data bytes remain (not counting q7), fold the 16 bytes q7 // into them, storing the result back into q7. - blt .Lfold_16_bytes_loop_done -.Lfold_16_bytes_loop: - vmull.p64 q8, q7l, FOLD_CONST_L - vmull.p64 q7, q7h, FOLD_CONST_H - veor.8 q7, q7, q8 + blt .Lfold_16_bytes_loop_done\@ +.Lfold_16_bytes_loop\@: + pmull16x64_\p FOLD_CONST, q7 vld1.64 {q0}, [buf]! CPU_LE( vrev64.8 q0, q0 ) vswp q0l, q0h veor.8 q7, q7, q0 subs len, len, #16 - bge .Lfold_16_bytes_loop + bge .Lfold_16_bytes_loop\@ -.Lfold_16_bytes_loop_done: +.Lfold_16_bytes_loop_done\@: // Add 16 to get the correct number of data bytes remaining in 0...15 // (not counting q7), following the previous extra subtraction by 16. adds len, len, #16 - beq .Lreduce_final_16_bytes + beq .Lreduce_final_16_bytes\@ -.Lhandle_partial_segment: +.Lhandle_partial_segment\@: // Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first // 16 bytes are in q7 and the rest are the remaining data in 'buf'. To // do this without needing a fold constant for each possible 'len', @@ -262,9 +325,9 @@ CPU_LE( vrev64.8 q0, q0 ) vswp q0l, q0h // q1 = high order part of second chunk: q7 left-shifted by 'len' bytes. - __adrl r3, .Lbyteshift_table + 16 - sub r3, r3, len - vld1.8 {q2}, [r3] + mov_l r1, .Lbyteshift_table + 16 + sub r1, r1, len + vld1.8 {q2}, [r1] vtbl.8 q1l, {q7l-q7h}, q2l vtbl.8 q1h, {q7l-q7h}, q2h @@ -282,12 +345,46 @@ CPU_LE( vrev64.8 q0, q0 ) vbsl.8 q2, q1, q0 // Fold the first chunk into the second chunk, storing the result in q7. - vmull.p64 q0, q3l, FOLD_CONST_L - vmull.p64 q7, q3h, FOLD_CONST_H - veor.8 q7, q7, q0 - veor.8 q7, q7, q2 + pmull16x64_\p FOLD_CONST, q3 + veor.8 q7, q3, q2 + b .Lreduce_final_16_bytes\@ + +.Lless_than_256_bytes\@: + // Checksumming a buffer of length 16...255 bytes + + mov_l fold_consts_ptr, .Lfold_across_16_bytes_consts + + // Load the first 16 data bytes. + vld1.64 {q7}, [buf]! +CPU_LE( vrev64.8 q7, q7 ) + vswp q7l, q7h + + // XOR the first 16 data *bits* with the initial CRC value. + vmov.i8 q0h, #0 + vmov.u16 q0h[3], init_crc + veor.8 q7h, q7h, q0h + + // Load the fold-across-16-bytes constants. + vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! + + cmp len, #16 + beq .Lreduce_final_16_bytes\@ // len == 16 + subs len, len, #32 + addlt len, len, #16 + blt .Lhandle_partial_segment\@ // 17 <= len <= 31 + b .Lfold_16_bytes_loop\@ // 32 <= len <= 255 + +.Lreduce_final_16_bytes\@: + .endm + +// +// u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len); +// +// Assumes len >= 16. +// +ENTRY(crc_t10dif_pmull64) + crct10dif p64 -.Lreduce_final_16_bytes: // Reduce the 128-bit value M(x), stored in q7, to the final 16-bit CRC. // Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'. @@ -320,32 +417,19 @@ CPU_LE( vrev64.8 q0, q0 ) vmov.u16 r0, q0l[0] bx lr +ENDPROC(crc_t10dif_pmull64) -.Lless_than_256_bytes: - // Checksumming a buffer of length 16...255 bytes +ENTRY(crc_t10dif_pmull8) + push {r4, lr} + mov_l r4, .L16x64perm - __adrl fold_consts_ptr, .Lfold_across_16_bytes_consts + crct10dif p8 - // Load the first 16 data bytes. - vld1.64 {q7}, [buf]! CPU_LE( vrev64.8 q7, q7 ) vswp q7l, q7h - - // XOR the first 16 data *bits* with the initial CRC value. - vmov.i8 q0h, #0 - vmov.u16 q0h[3], init_crc - veor.8 q7h, q7h, q0h - - // Load the fold-across-16-bytes constants. - vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! - - cmp len, #16 - beq .Lreduce_final_16_bytes // len == 16 - subs len, len, #32 - addlt len, len, #16 - blt .Lhandle_partial_segment // 17 <= len <= 31 - b .Lfold_16_bytes_loop // 32 <= len <= 255 -ENDPROC(crc_t10dif_pmull) + vst1.64 {q7}, [r3, :128] + pop {r4, pc} +ENDPROC(crc_t10dif_pmull8) .section ".rodata", "a" .align 4 @@ -379,3 +463,6 @@ ENDPROC(crc_t10dif_pmull) .byte 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f .byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 .byte 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe , 0x0 + +.L16x64perm: + .quad 0x808080800000000, 0x909090901010101 diff --git a/arch/arm/lib/crc-t10dif-glue.c b/arch/arm/lib/crc-t10dif-glue.c new file mode 100644 index 000000000000..6efad3d78284 --- /dev/null +++ b/arch/arm/lib/crc-t10dif-glue.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions + * + * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> + */ + +#include <linux/crc-t10dif.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> + +#include <crypto/internal/simd.h> + +#include <asm/neon.h> +#include <asm/simd.h> + +static DEFINE_STATIC_KEY_FALSE(have_neon); +static DEFINE_STATIC_KEY_FALSE(have_pmull); + +#define CRC_T10DIF_PMULL_CHUNK_SIZE 16U + +asmlinkage u16 crc_t10dif_pmull64(u16 init_crc, const u8 *buf, size_t len); +asmlinkage void crc_t10dif_pmull8(u16 init_crc, const u8 *buf, size_t len, + u8 out[16]); + +u16 crc_t10dif_arch(u16 crc, const u8 *data, size_t length) +{ + if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE) { + if (static_branch_likely(&have_pmull)) { + if (crypto_simd_usable()) { + kernel_neon_begin(); + crc = crc_t10dif_pmull64(crc, data, length); + kernel_neon_end(); + return crc; + } + } else if (length > CRC_T10DIF_PMULL_CHUNK_SIZE && + static_branch_likely(&have_neon) && + crypto_simd_usable()) { + u8 buf[16] __aligned(16); + + kernel_neon_begin(); + crc_t10dif_pmull8(crc, data, length, buf); + kernel_neon_end(); + + return crc_t10dif_generic(0, buf, sizeof(buf)); + } + } + return crc_t10dif_generic(crc, data, length); +} +EXPORT_SYMBOL(crc_t10dif_arch); + +static int __init crc_t10dif_arm_init(void) +{ + if (elf_hwcap & HWCAP_NEON) { + static_branch_enable(&have_neon); + if (elf_hwcap2 & HWCAP2_PMULL) + static_branch_enable(&have_pmull); + } + return 0; +} +arch_initcall(crc_t10dif_arm_init); + +static void __exit crc_t10dif_arm_exit(void) +{ +} +module_exit(crc_t10dif_arm_exit); + +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_DESCRIPTION("Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/crypto/crc32-ce-core.S b/arch/arm/lib/crc32-core.S index 3f13a76b9066..6f674f30c70b 100644 --- a/arch/arm/crypto/crc32-ce-core.S +++ b/arch/arm/lib/crc32-core.S @@ -123,11 +123,12 @@ * uint crc32_pmull_le(unsigned char const *buffer, * size_t len, uint crc32) */ -ENTRY(crc32_pmull_le) +SYM_FUNC_START(crc32_pmull_le) adr r3, .Lcrc32_constants b 0f +SYM_FUNC_END(crc32_pmull_le) -ENTRY(crc32c_pmull_le) +SYM_FUNC_START(crc32c_pmull_le) adr r3, .Lcrc32c_constants 0: bic LEN, LEN, #15 @@ -236,8 +237,7 @@ fold_64: vmov r0, s5 bx lr -ENDPROC(crc32_pmull_le) -ENDPROC(crc32c_pmull_le) +SYM_FUNC_END(crc32c_pmull_le) .macro __crc32, c subs ip, r2, #8 @@ -296,11 +296,11 @@ ARM_BE8(rev16 r3, r3 ) .endm .align 5 -ENTRY(crc32_armv8_le) +SYM_FUNC_START(crc32_armv8_le) __crc32 -ENDPROC(crc32_armv8_le) +SYM_FUNC_END(crc32_armv8_le) .align 5 -ENTRY(crc32c_armv8_le) +SYM_FUNC_START(crc32c_armv8_le) __crc32 c -ENDPROC(crc32c_armv8_le) +SYM_FUNC_END(crc32c_armv8_le) diff --git a/arch/arm/lib/crc32-glue.c b/arch/arm/lib/crc32-glue.c new file mode 100644 index 000000000000..4340351dbde8 --- /dev/null +++ b/arch/arm/lib/crc32-glue.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions + * + * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> + */ + +#include <linux/cpufeature.h> +#include <linux/crc32.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> + +#include <crypto/internal/simd.h> + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> + +static DEFINE_STATIC_KEY_FALSE(have_crc32); +static DEFINE_STATIC_KEY_FALSE(have_pmull); + +#define PMULL_MIN_LEN 64 /* min size of buffer for pmull functions */ + +asmlinkage u32 crc32_pmull_le(const u8 buf[], u32 len, u32 init_crc); +asmlinkage u32 crc32_armv8_le(u32 init_crc, const u8 buf[], u32 len); + +asmlinkage u32 crc32c_pmull_le(const u8 buf[], u32 len, u32 init_crc); +asmlinkage u32 crc32c_armv8_le(u32 init_crc, const u8 buf[], u32 len); + +static u32 crc32_le_scalar(u32 crc, const u8 *p, size_t len) +{ + if (static_branch_likely(&have_crc32)) + return crc32_armv8_le(crc, p, len); + return crc32_le_base(crc, p, len); +} + +u32 crc32_le_arch(u32 crc, const u8 *p, size_t len) +{ + if (len >= PMULL_MIN_LEN + 15 && + static_branch_likely(&have_pmull) && crypto_simd_usable()) { + size_t n = -(uintptr_t)p & 15; + + /* align p to 16-byte boundary */ + if (n) { + crc = crc32_le_scalar(crc, p, n); + p += n; + len -= n; + } + n = round_down(len, 16); + kernel_neon_begin(); + crc = crc32_pmull_le(p, n, crc); + kernel_neon_end(); + p += n; + len -= n; + } + return crc32_le_scalar(crc, p, len); +} +EXPORT_SYMBOL(crc32_le_arch); + +static u32 crc32c_scalar(u32 crc, const u8 *p, size_t len) +{ + if (static_branch_likely(&have_crc32)) + return crc32c_armv8_le(crc, p, len); + return crc32c_base(crc, p, len); +} + +u32 crc32c_arch(u32 crc, const u8 *p, size_t len) +{ + if (len >= PMULL_MIN_LEN + 15 && + static_branch_likely(&have_pmull) && crypto_simd_usable()) { + size_t n = -(uintptr_t)p & 15; + + /* align p to 16-byte boundary */ + if (n) { + crc = crc32c_scalar(crc, p, n); + p += n; + len -= n; + } + n = round_down(len, 16); + kernel_neon_begin(); + crc = crc32c_pmull_le(p, n, crc); + kernel_neon_end(); + p += n; + len -= n; + } + return crc32c_scalar(crc, p, len); +} +EXPORT_SYMBOL(crc32c_arch); + +u32 crc32_be_arch(u32 crc, const u8 *p, size_t len) +{ + return crc32_be_base(crc, p, len); +} +EXPORT_SYMBOL(crc32_be_arch); + +static int __init crc32_arm_init(void) +{ + if (elf_hwcap2 & HWCAP2_CRC32) + static_branch_enable(&have_crc32); + if (elf_hwcap2 & HWCAP2_PMULL) + static_branch_enable(&have_pmull); + return 0; +} +arch_initcall(crc32_arm_init); + +static void __exit crc32_arm_exit(void) +{ +} +module_exit(crc32_arm_exit); + +u32 crc32_optimizations(void) +{ + if (elf_hwcap2 & (HWCAP2_CRC32 | HWCAP2_PMULL)) + return CRC32_LE_OPTIMIZATION | CRC32C_OPTIMIZATION; + return 0; +} +EXPORT_SYMBOL(crc32_optimizations); + +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_DESCRIPTION("Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 6928781e6bee..c289bde04743 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -13,7 +13,8 @@ .text -#ifdef CONFIG_CPU_SW_DOMAIN_PAN +#if defined(CONFIG_CPU_SW_DOMAIN_PAN) + .macro save_regs mrc p15, 0, ip, c3, c0, 0 stmfd sp!, {r1, r2, r4 - r8, ip, lr} @@ -25,7 +26,23 @@ mcr p15, 0, ip, c3, c0, 0 ret lr .endm + +#elif defined(CONFIG_CPU_TTBR0_PAN) + + .macro save_regs + mrc p15, 0, ip, c2, c0, 2 @ read TTBCR + stmfd sp!, {r1, r2, r4 - r8, ip, lr} + uaccess_enable ip + .endm + + .macro load_regs + ldmfd sp!, {r1, r2, r4 - r8, ip, lr} + mcr p15, 0, ip, c2, c0, 2 @ restore TTBCR + ret lr + .endm + #else + .macro save_regs stmfd sp!, {r1, r2, r4 - r8, lr} .endm @@ -33,6 +50,7 @@ .macro load_regs ldmfd sp!, {r1, r2, r4 - r8, pc} .endm + #endif .macro load1b, reg1 diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index 3ac05177d097..33b08ca1c242 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -5,6 +5,7 @@ * Copyright (C) 1995, 1996 Russell King */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/delay.h> @@ -24,21 +25,26 @@ * HZ <= 1000 */ -ENTRY(__loop_udelay) +SYM_TYPED_FUNC_START(__loop_udelay) ldr r2, .LC1 mul r0, r2, r0 @ r0 = delay_us * UDELAY_MULT -ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0xfffffaf0 + b __loop_const_udelay +SYM_FUNC_END(__loop_udelay) + +SYM_TYPED_FUNC_START(__loop_const_udelay) @ 0 <= r0 <= 0xfffffaf0 ldr r2, .LC0 ldr r2, [r2] umull r1, r0, r2, r0 @ r0-r1 = r0 * loops_per_jiffy adds r1, r1, #0xffffffff @ rounding up ... adcs r0, r0, r0 @ and right shift by 31 reteq lr + b __loop_delay +SYM_FUNC_END(__loop_const_udelay) .align 3 @ Delay routine -ENTRY(__loop_delay) +SYM_TYPED_FUNC_START(__loop_delay) subs r0, r0, #1 #if 0 retls lr @@ -58,6 +64,4 @@ ENTRY(__loop_delay) #endif bhi __loop_delay ret lr -ENDPROC(__loop_udelay) -ENDPROC(__loop_const_udelay) -ENDPROC(__loop_delay) +SYM_FUNC_END(__loop_delay) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 2f6163f05e93..c0ac7796d775 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -56,10 +56,10 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) * to see that it's still huge and whether or not we will * need to fault on write. */ - if (unlikely(pmd_thp_or_huge(*pmd))) { + if (unlikely(pmd_leaf(*pmd))) { ptl = ¤t->mm->page_table_lock; spin_lock(ptl); - if (unlikely(!pmd_thp_or_huge(*pmd) + if (unlikely(!pmd_leaf(*pmd) || pmd_hugewillfault(*pmd))) { spin_unlock(ptl); return 0; diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c index 522510baed49..cf57fca97908 100644 --- a/arch/arm/lib/xor-neon.c +++ b/arch/arm/lib/xor-neon.c @@ -8,6 +8,7 @@ #include <linux/raid/xor.h> #include <linux/module.h> +MODULE_DESCRIPTION("NEON accelerated XOR implementation"); MODULE_LICENSE("GPL"); #ifndef __ARM_NEON__ diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.c b/arch/arm/mach-alpine/alpine_cpu_pm.c index 13ae8412e9ce..b48da6f12b6c 100644 --- a/arch/arm/mach-alpine/alpine_cpu_pm.c +++ b/arch/arm/mach-alpine/alpine_cpu_pm.c @@ -29,7 +29,7 @@ int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr) /* * Set CPU resume address - * secure firmware running on boot will jump to this address - * after setting proper CPU mode, and initialiing e.g. secure + * after setting proper CPU mode, and initializing e.g. secure * regs (the same mode all CPUs are booted to - usually HYP) */ writel(phys_resume_addr, diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index a8c022b4c053..04bd91c72521 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -58,6 +58,17 @@ config SOC_SAMA5D4 help Select this if you are using one of Microchip's SAMA5D4 family SoC. +config SOC_SAMA7D65 + bool "SAMA7D65 family" + depends on ARCH_MULTI_V7 + select HAVE_AT91_GENERATED_CLK + select HAVE_AT91_SAM9X60_PLL + select HAVE_AT91_USB_CLK + select HAVE_AT91_UTMI + select SOC_SAMA7 + help + Select this if you are using one of Microchip's SAMA7D65 family SoC. + config SOC_SAMA7G5 bool "SAMA7G5 family" depends on ARCH_MULTI_V7 @@ -141,11 +152,27 @@ config SOC_SAM9X60 help Select this if you are using Microchip's SAM9X60 SoC +config SOC_SAM9X7 + bool "SAM9X7" + depends on ARCH_MULTI_V5 + select ATMEL_AIC5_IRQ + select ATMEL_PM if PM + select CPU_ARM926T + select HAVE_AT91_USB_CLK + select HAVE_AT91_GENERATED_CLK + select HAVE_AT91_SAM9X60_PLL + select MEMORY + select PINCTRL_AT91 + select SOC_SAM_V4_V5 + select SRAM if PM + help + Select this if you are using Microchip's SAM9X7 SoC + comment "Clocksource driver selection" config ATMEL_CLOCKSOURCE_PIT bool "Periodic Interval Timer (PIT) support" - depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5 + depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 default SOC_AT91SAM9 || SOC_SAMA5 select ATMEL_PIT help @@ -155,7 +182,7 @@ config ATMEL_CLOCKSOURCE_PIT config ATMEL_CLOCKSOURCE_TCB bool "Timer Counter Blocks (TCB) support" - default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5 + default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 select ATMEL_TCB_CLKSRC help Select this to get a high precision clocksource based on a @@ -166,7 +193,7 @@ config ATMEL_CLOCKSOURCE_TCB config MICROCHIP_CLOCKSOURCE_PIT64B bool "64-bit Periodic Interval Timer (PIT64B) support" - default SOC_SAM9X60 || SOC_SAMA7 + default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7 select MICROCHIP_PIT64B help Select this to get a high resolution clockevent (SAM9X60) or diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 794bd12ab0a8..7d8a7bc44e65 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o +obj-$(CONFIG_SOC_SAM9X7) += sam9x7.o obj-$(CONFIG_SOC_SAMA5) += sama5.o sam_secure.o obj-$(CONFIG_SOC_SAMA7) += sama7.o obj-$(CONFIG_SOC_SAMV7) += samv7.o diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c3960a8b3eb..acf0b3c82a30 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -12,6 +12,7 @@ extern void __init at91rm9200_pm_init(void); extern void __init at91sam9_pm_init(void); extern void __init sam9x60_pm_init(void); +extern void __init sam9x7_pm_init(void); extern void __init sama5_pm_init(void); extern void __init sama5d2_pm_init(void); extern void __init sama7_pm_init(void); @@ -19,6 +20,7 @@ extern void __init sama7_pm_init(void); static inline void __init at91rm9200_pm_init(void) { } static inline void __init at91sam9_pm_init(void) { } static inline void __init sam9x60_pm_init(void) { } +static inline void __init sam9x7_pm_init(void) { } static inline void __init sama5_pm_init(void) { } static inline void __init sama5d2_pm_init(void) { } static inline void __init sama7_pm_init(void) { } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 345b91dc6627..3aa20038ad93 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -222,17 +222,27 @@ static const struct of_device_id sam9x60_ws_ids[] = { { /* sentinel */ } }; -static const struct of_device_id sama7g5_ws_ids[] = { +static const struct of_device_id sama7_ws_ids[] = { + { .compatible = "microchip,sama7d65-rtc", .data = &ws_info[1] }, { .compatible = "microchip,sama7g5-rtc", .data = &ws_info[1] }, { .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, { .compatible = "usb-ehci", .data = &ws_info[2] }, + { .compatible = "microchip,sama7d65-sdhci", .data = &ws_info[3] }, { .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] }, + { .compatible = "microchip,sama7d65-rtt", .data = &ws_info[4] }, { .compatible = "microchip,sama7g5-rtt", .data = &ws_info[4] }, { /* sentinel */ } }; +static const struct of_device_id sam9x7_ws_ids[] = { + { .compatible = "microchip,sam9x7-rtc", .data = &ws_info[1] }, + { .compatible = "microchip,sam9x7-rtt", .data = &ws_info[4] }, + { .compatible = "microchip,sam9x7-gem", .data = &ws_info[5] }, + { /* sentinel */ } +}; + static int at91_pm_config_ws(unsigned int pm_mode, bool set) { const struct wakeup_source_info *wsi; @@ -538,11 +548,12 @@ extern u32 at91_pm_suspend_in_sram_sz; static int at91_suspend_finish(unsigned long val) { - unsigned char modified_gray_code[] = { - 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d, - 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b, - 0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13, - 0x10, 0x11, + /* SYNOPSYS workaround to fix a bug in the calibration logic */ + unsigned char modified_fix_code[] = { + 0x00, 0x01, 0x01, 0x06, 0x07, 0x0c, 0x06, 0x07, 0x0b, 0x18, + 0x0a, 0x0b, 0x0c, 0x0d, 0x0d, 0x0a, 0x13, 0x13, 0x12, 0x13, + 0x14, 0x15, 0x15, 0x12, 0x18, 0x19, 0x19, 0x1e, 0x1f, 0x14, + 0x1e, 0x1f, }; unsigned int tmp, index; int i; @@ -553,25 +564,25 @@ static int at91_suspend_finish(unsigned long val) * restore the ZQ0SR0 with the value saved here. But the * calibration is buggy and restoring some values from ZQ0SR0 * is forbidden and risky thus we need to provide processed - * values for these (modified gray code values). + * values for these. */ tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0); /* Store pull-down output impedance select. */ index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f; - soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index]; + soc_pm.bu->ddr_phy_calibration[0] = modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDO_OFF; /* Store pull-up output impedance select. */ index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f; - soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PUO_OFF; /* Store pull-down on-die termination impedance select. */ index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f; - soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDODT_OFF; /* Store pull-up on-die termination impedance select. */ index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f; - soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SRO_PUODT_OFF; /* * The 1st 8 words of memory might get corrupted in the process @@ -591,7 +602,21 @@ static int at91_suspend_finish(unsigned long val) return 0; } -static void at91_pm_switch_ba_to_vbat(void) +/** + * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch + * to automatic/hardware mode. + * + * The Backup Unit Power Switch can be managed either by software or hardware. + * Enabling hardware mode allows the automatic transition of power between + * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the + * availability of these power sources. + * + * If the Backup Unit Power Switch is already in automatic mode, no action is + * required. If it is in software-controlled mode, it is switched to automatic + * mode to enhance safety and eliminate the need for toggling between power + * sources. + */ +static void at91_pm_switch_ba_to_auto(void) { unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu); unsigned int val; @@ -602,24 +627,19 @@ static void at91_pm_switch_ba_to_vbat(void) val = readl(soc_pm.data.sfrbu + offset); - /* Already on VBAT. */ - if (!(val & soc_pm.sfrbu_regs.pswbu.state)) + /* Already on auto/hardware. */ + if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl)) return; - val &= ~soc_pm.sfrbu_regs.pswbu.softsw; - val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl; + val &= ~soc_pm.sfrbu_regs.pswbu.ctrl; + val |= soc_pm.sfrbu_regs.pswbu.key; writel(val, soc_pm.data.sfrbu + offset); - - /* Wait for update. */ - val = readl(soc_pm.data.sfrbu + offset); - while (val & soc_pm.sfrbu_regs.pswbu.state) - val = readl(soc_pm.data.sfrbu + offset); } static void at91_pm_suspend(suspend_state_t state) { if (soc_pm.data.mode == AT91_PM_BACKUP) { - at91_pm_switch_ba_to_vbat(); + at91_pm_switch_ba_to_auto(); cpu_suspend(0, at91_suspend_finish); @@ -627,6 +647,11 @@ static void at91_pm_suspend(suspend_state_t state) at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); + + if (IS_ENABLED(CONFIG_SOC_SAMA7D65)) { + /* SHDWC.SR */ + readl(soc_pm.data.shdwc + 0x08); + } } else { at91_suspend_finish(0); } @@ -1045,7 +1070,8 @@ static int __init at91_pm_backup_init(void) int ret = -ENODEV, located = 0; if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) && - !IS_ENABLED(CONFIG_SOC_SAMA7G5)) + !IS_ENABLED(CONFIG_SOC_SAMA7G5) && + !IS_ENABLED(CONFIG_SOC_SAMA7D65)) return -EPERM; if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) @@ -1313,6 +1339,7 @@ struct pmc_info { unsigned long uhp_udp_mask; unsigned long mckr; unsigned long version; + unsigned long mcks; }; static const struct pmc_info pmc_infos[] __initconst = { @@ -1344,8 +1371,14 @@ static const struct pmc_info pmc_infos[] __initconst = { { .mckr = 0x28, .version = AT91_PMC_V2, + .mcks = 4, + }, + { + .uhp_udp_mask = AT91SAM926x_PMC_UHP, + .mckr = 0x28, + .version = AT91_PMC_V2, + .mcks = 9, }, - }; static const struct of_device_id atmel_pmc_ids[] __initconst = { @@ -1361,6 +1394,8 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = { { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] }, + { .compatible = "microchip,sam9x7-pmc", .data = &pmc_infos[4] }, + { .compatible = "microchip,sama7d65-pmc", .data = &pmc_infos[6] }, { .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] }, { /* sentinel */ }, }; @@ -1431,6 +1466,7 @@ static void __init at91_pm_init(void (*pm_idle)(void)) soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask; soc_pm.data.pmc_mckr_offset = pmc->mckr; soc_pm.data.pmc_version = pmc->version; + soc_pm.data.pmc_mcks = pmc->mcks; if (pm_idle) arm_pm_idle = pm_idle; @@ -1499,6 +1535,27 @@ void __init sam9x60_pm_init(void) soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; } +void __init sam9x7_pm_init(void) +{ + static const int modes[] __initconst = { + AT91_PM_STANDBY, AT91_PM_ULP0, + }; + int ret; + + if (!IS_ENABLED(CONFIG_SOC_SAM9X7)) + return; + + at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); + ret = at91_dt_ramc(false); + if (ret) + return; + + at91_pm_init(NULL); + + soc_pm.ws_ids = sam9x7_ws_ids; + soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; +} + void __init at91sam9_pm_init(void) { int ret; @@ -1633,7 +1690,7 @@ void __init sama7_pm_init(void) at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); at91_pm_init(NULL); - soc_pm.ws_ids = sama7g5_ws_ids; + soc_pm.ws_ids = sama7_ws_ids; soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 53bdc9000e44..50c3a425d140 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -39,6 +39,7 @@ struct at91_pm_data { unsigned int suspend_mode; unsigned int pmc_mckr_offset; unsigned int pmc_version; + unsigned int pmc_mcks; }; #endif diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c index 40bd4e8fe40a..0ca5da66dc26 100644 --- a/arch/arm/mach-at91/pm_data-offsets.c +++ b/arch/arm/mach-at91/pm_data-offsets.c @@ -18,6 +18,8 @@ int main(void) pmc_mckr_offset)); DEFINE(PM_DATA_PMC_VERSION, offsetof(struct at91_pm_data, pmc_version)); + DEFINE(PM_DATA_PMC_MCKS, offsetof(struct at91_pm_data, + pmc_mcks)); return 0; } diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index e5869cca5e79..e23b86834096 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -814,18 +814,20 @@ sr_dis_exit: .endm /** - * at91_mckx_ps_enable: save MCK1..4 settings and switch it to main clock + * at91_mckx_ps_enable: save MCK settings and switch it to main clock * - * Side effects: overwrites tmp1, tmp2 + * Side effects: overwrites tmp1, tmp2, tmp3 */ .macro at91_mckx_ps_enable #ifdef CONFIG_SOC_SAMA7 ldr pmc, .pmc_base + ldr tmp3, .mcks - /* There are 4 MCKs we need to handle: MCK1..4 */ + /* Start at MCK1 and go until MCKs */ mov tmp1, #1 -e_loop: cmp tmp1, #5 - beq e_done +e_loop: + cmp tmp1, tmp3 + bgt e_done /* Write MCK ID to retrieve the settings. */ str tmp1, [pmc, #AT91_PMC_MCR_V2] @@ -850,7 +852,37 @@ e_save_mck3: b e_ps e_save_mck4: + cmp tmp1, #4 + bne e_save_mck5 str tmp2, .saved_mck4 + b e_ps + +e_save_mck5: + cmp tmp1, #5 + bne e_save_mck6 + str tmp2, .saved_mck5 + b e_ps + +e_save_mck6: + cmp tmp1, #6 + bne e_save_mck7 + str tmp2, .saved_mck6 + b e_ps + +e_save_mck7: + cmp tmp1, #7 + bne e_save_mck8 + str tmp2, .saved_mck7 + b e_ps + +e_save_mck8: + cmp tmp1, #8 + bne e_save_mck9 + str tmp2, .saved_mck8 + b e_ps + +e_save_mck9: + str tmp2, .saved_mck9 e_ps: /* Use CSS=MAINCK and DIV=1. */ @@ -870,18 +902,20 @@ e_done: .endm /** - * at91_mckx_ps_restore: restore MCK1..4 settings + * at91_mckx_ps_restore: restore MCKx settings * * Side effects: overwrites tmp1, tmp2 */ .macro at91_mckx_ps_restore #ifdef CONFIG_SOC_SAMA7 ldr pmc, .pmc_base + ldr tmp2, .mcks - /* There are 4 MCKs we need to handle: MCK1..4 */ + /* Start from MCK1 and go up to MCKs */ mov tmp1, #1 -r_loop: cmp tmp1, #5 - beq r_done +r_loop: + cmp tmp1, tmp2 + bgt r_done r_save_mck1: cmp tmp1, #1 @@ -902,7 +936,37 @@ r_save_mck3: b r_ps r_save_mck4: + cmp tmp1, #4 + bne r_save_mck5 ldr tmp2, .saved_mck4 + b r_ps + +r_save_mck5: + cmp tmp1, #5 + bne r_save_mck6 + ldr tmp2, .saved_mck5 + b r_ps + +r_save_mck6: + cmp tmp1, #6 + bne r_save_mck7 + ldr tmp2, .saved_mck6 + b r_ps + +r_save_mck7: + cmp tmp1, #7 + bne r_save_mck8 + ldr tmp2, .saved_mck7 + b r_ps + +r_save_mck8: + cmp tmp1, #8 + bne r_save_mck9 + ldr tmp2, .saved_mck8 + b r_ps + +r_save_mck9: + ldr tmp2, .saved_mck9 r_ps: /* Write MCK ID to retrieve the settings. */ @@ -921,6 +985,7 @@ r_ps: wait_mckrdy tmp1 add tmp1, tmp1, #1 + ldr tmp2, .mcks b r_loop r_done: #endif @@ -1045,6 +1110,10 @@ ENTRY(at91_pm_suspend_in_sram) str tmp1, .memtype ldr tmp1, [r0, #PM_DATA_MODE] str tmp1, .pm_mode +#ifdef CONFIG_SOC_SAMA7 + ldr tmp1, [r0, #PM_DATA_PMC_MCKS] + str tmp1, .mcks +#endif /* * ldrne below are here to preload their address in the TLB as access @@ -1132,6 +1201,10 @@ ENDPROC(at91_pm_suspend_in_sram) .word 0 .pmc_version: .word 0 +#ifdef CONFIG_SOC_SAMA7 +.mcks: + .word 0 +#endif .saved_mckr: .word 0 .saved_pllar: @@ -1155,6 +1228,16 @@ ENDPROC(at91_pm_suspend_in_sram) .word 0 .saved_mck4: .word 0 +.saved_mck5: + .word 0 +.saved_mck6: + .word 0 +.saved_mck7: + .word 0 +.saved_mck8: + .word 0 +.saved_mck9: + .word 0 #endif ENTRY(at91_pm_suspend_in_sram_sz) diff --git a/arch/arm/mach-at91/sam9x7.c b/arch/arm/mach-at91/sam9x7.c new file mode 100644 index 000000000000..e1ff30b5b09b --- /dev/null +++ b/arch/arm/mach-at91/sam9x7.c @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Setup code for SAM9X7. + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> + */ + +#include <linux/of.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> + +#include "generic.h" + +static void __init sam9x7_init(void) +{ + of_platform_default_populate(NULL, NULL, NULL); + + sam9x7_pm_init(); +} + +static const char * const sam9x7_dt_board_compat[] __initconst = { + "microchip,sam9x7", + NULL +}; + +DT_MACHINE_START(sam9x7_dt, "Microchip SAM9X7") + /* Maintainer: Microchip */ + .init_machine = sam9x7_init, + .dt_compat = sam9x7_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 7318d8789e24..24bc6e18d806 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -185,6 +185,7 @@ config ARCH_BRCMSTB select ARCH_HAS_RESET_CONTROLLER select ARM_AMBA select ARM_GIC + select ARM_GIC_V3 select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 2e523f29ec3b..6baedf4c6304 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -58,5 +58,6 @@ endif # BCMBCA ifeq ($(CONFIG_ARCH_BCMBCA),y) +obj-$(CONFIG_DEBUG_BCMBCA) += board_bcmbca.o obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_pmb.o endif diff --git a/arch/arm/mach-bcm/board_bcmbca.c b/arch/arm/mach-bcm/board_bcmbca.c new file mode 100644 index 000000000000..b510d959870a --- /dev/null +++ b/arch/arm/mach-bcm/board_bcmbca.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2024 Linus Walleij <linus.walleij@linaro.org> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +/* This is needed for LL-debug/earlyprintk/debug-macro.S */ +static struct map_desc bcmbca_io_desc[] __initdata = { + { + .virtual = CONFIG_DEBUG_UART_VIRT, + .pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init bcmbca_map_io(void) +{ + iotable_init(bcmbca_io_desc, ARRAY_SIZE(bcmbca_io_desc)); +} + +static const char * const bcmbca_dt_compat[] = { + /* TODO: Add other BCMBCA SoCs here to get debug UART support */ + "brcm,bcm6846", + NULL, +}; + +DT_MACHINE_START(BCMBCA_DT, "BCMBCA Broadband Access Processors") + .map_io = bcmbca_map_io, + .dt_compat = bcmbca_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c index 43bc98e388bf..27948b515993 100644 --- a/arch/arm/mach-bcm/brcmstb.c +++ b/arch/arm/mach-bcm/brcmstb.c @@ -23,11 +23,6 @@ u32 brcmstb_uart_config[3] = { 0, }; -static void __init brcmstb_init_irq(void) -{ - irqchip_init(); -} - static const char *const brcmstb_match[] __initconst = { "brcm,bcm7445", "brcm,brcmstb", @@ -36,5 +31,4 @@ static const char *const brcmstb_match[] __initconst = { DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)") .dt_compat = brcmstb_match, - .init_irq = brcmstb_init_irq, MACHINE_END diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 2a8a9fe46586..8f66de0405d9 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_DAVINCI bool "TI DaVinci" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN + select ARCH_DAVINCI_DA850 select CPU_ARM926T select DAVINCI_TIMER select ZONE_DMA @@ -27,6 +28,7 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" + select ARCH_DAVINCI_DA8XX select DAVINCI_CP_INTC config ARCH_DAVINCI_DA8XX diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 450883ea0e73..31d22a5d8e1e 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o pdata-quirks.o obj-y += da8xx-dt.o # Power Management -obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_HAVE_CLK) += pm_domain.o ifeq ($(CONFIG_SUSPEND),y) obj-$(CONFIG_ARCH_DAVINCI_DA850) += pm.o sleep.o diff --git a/arch/arm/mach-davinci/common.h b/arch/arm/mach-davinci/common.h index 8aa6d4fc3f6f..81a2b06b46e9 100644 --- a/arch/arm/mach-davinci/common.h +++ b/arch/arm/mach-davinci/common.h @@ -52,7 +52,6 @@ struct davinci_soc_info { extern struct davinci_soc_info davinci_soc_info; extern void davinci_common_init(const struct davinci_soc_info *soc_info); -extern void davinci_init_ide(void); void davinci_init_late(void); #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c deleted file mode 100644 index 78a1575c387d..000000000000 --- a/arch/arm/mach-davinci/cpuidle.c +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * CPU idle for DaVinci SoCs - * - * Copyright (C) 2009 Texas Instruments Incorporated. https://www.ti.com/ - * - * Derived from Marvell Kirkwood CPU idle code - * (arch/arm/mach-kirkwood/cpuidle.c) - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/cpuidle.h> -#include <linux/io.h> -#include <linux/export.h> -#include <asm/cpuidle.h> - -#include "cpuidle.h" -#include "ddr2.h" - -#define DAVINCI_CPUIDLE_MAX_STATES 2 - -static void __iomem *ddr2_reg_base; -static bool ddr2_pdown; - -static void davinci_save_ddr_power(int enter, bool pdown) -{ - u32 val; - - val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); - - if (enter) { - if (pdown) - val |= DDR2_SRPD_BIT; - else - val &= ~DDR2_SRPD_BIT; - val |= DDR2_LPMODEN_BIT; - } else { - val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); - } - - __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); -} - -/* Actual code that puts the SoC in different idle states */ -static __cpuidle int davinci_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - davinci_save_ddr_power(1, ddr2_pdown); - cpu_do_idle(); - davinci_save_ddr_power(0, ddr2_pdown); - - return index; -} - -static struct cpuidle_driver davinci_idle_driver = { - .name = "cpuidle-davinci", - .owner = THIS_MODULE, - .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[1] = { - .enter = davinci_enter_idle, - .exit_latency = 10, - .target_residency = 10000, - .name = "DDR SR", - .desc = "WFI and DDR Self Refresh", - }, - .state_count = DAVINCI_CPUIDLE_MAX_STATES, -}; - -static int __init davinci_cpuidle_probe(struct platform_device *pdev) -{ - struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; - - if (!pdata) { - dev_err(&pdev->dev, "cannot get platform data\n"); - return -ENOENT; - } - - ddr2_reg_base = pdata->ddr2_ctlr_base; - - ddr2_pdown = pdata->ddr2_pdown; - - return cpuidle_register(&davinci_idle_driver, NULL); -} - -static struct platform_driver davinci_cpuidle_driver = { - .driver = { - .name = "cpuidle-davinci", - }, -}; - -static int __init davinci_cpuidle_init(void) -{ - return platform_driver_probe(&davinci_cpuidle_driver, - davinci_cpuidle_probe); -} -device_initcall(davinci_cpuidle_init); - diff --git a/arch/arm/mach-davinci/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h deleted file mode 100644 index 976d43073597..000000000000 --- a/arch/arm/mach-davinci/cpuidle.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * TI DaVinci cpuidle platform support - * - * 2009 (C) Texas Instruments, Inc. https://www.ti.com/ - */ -#ifndef _MACH_DAVINCI_CPUIDLE_H -#define _MACH_DAVINCI_CPUIDLE_H - -struct davinci_cpuidle_config { - u32 ddr2_pdown; - void __iomem *ddr2_ctlr_base; -}; - -#endif diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 2e497745b624..a044ea5cb4f1 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -11,7 +11,6 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/irqchip/irq-davinci-cp-intc.h> #include <clocksource/timer-davinci.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 6939166c33c2..5e73a725d5da 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -21,7 +21,6 @@ #include "common.h" #include "cputype.h" #include "da8xx.h" -#include "cpuidle.h" #include "irqs.h" #include "sram.h" diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h index 38f0e427291e..05fd3902df65 100644 --- a/arch/arm/mach-davinci/mux.h +++ b/arch/arm/mach-davinci/mux.h @@ -654,14 +654,9 @@ enum davinci_da850_index { #ifdef CONFIG_DAVINCI_MUX /* setup pin muxing */ extern int davinci_cfg_reg(unsigned long reg_cfg); -extern int davinci_cfg_reg_list(const short pins[]); #else /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } -static inline int davinci_cfg_reg_list(const short pins[]) -{ - return 0; -} #endif diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index 8aa39db095d7..2c5155bd376b 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -61,7 +61,7 @@ static void davinci_pm_suspend(void) /* Configure sleep count in deep sleep register */ val = __raw_readl(pm_config.deepsleep_reg); - val &= ~DEEPSLEEP_SLEEPCOUNT_MASK, + val &= ~DEEPSLEEP_SLEEPCOUNT_MASK; val |= pm_config.sleepcount; __raw_writel(val, pm_config.deepsleep_reg); diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 3aea90bbb41a..35e978514591 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -82,7 +82,7 @@ static void __init dove_clk_init(void) { struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1; struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma; - struct clk *xor0, *xor1, *ge, *gephy; + struct clk *xor0, *xor1, *ge; tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk); @@ -102,7 +102,7 @@ static void __init dove_clk_init(void) pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA); xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0); xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1); - gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); + dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE); orion_clkdev_add(NULL, "orion_spi.0", tclk); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 703f3d232a60..812b71dcf60e 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -3,27 +3,27 @@ menuconfig ARCH_EP93XX bool "EP93xx-based" depends on ATAGS depends on ARCH_MULTI_V4T + # CONFIG_ARCH_MULTI_V7 is not set depends on CPU_LITTLE_ENDIAN + select ARCH_HAS_RESET_CONTROLLER select ARCH_SPARSEMEM_ENABLE select ARM_AMBA select ARM_VIC + select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select ARM_ATAG_DTB_COMPAT # we need this to update dt memory node + select COMMON_CLK_EP93XX + select EP93XX_TIMER select CLKSRC_MMIO select CPU_ARM920T select GPIOLIB + select PINCTRL + select PINCTRL_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. if ARCH_EP93XX -menu "Cirrus EP93xx Implementation Options" - -config EP93XX_SOC_COMMON - bool - default y - select SOC_BUS - select LEDS_GPIO_REGISTER - -comment "EP93xx Platforms" +# menu "EP93xx Platforms" config MACH_BK3 bool "Support Liebherr BK3.1" @@ -103,6 +103,6 @@ config MACH_VISION_EP9307 Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. -endmenu +# endmenu endif diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile deleted file mode 100644 index 62e37403df14..000000000000 --- a/arch/arm/mach-ep93xx/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# -obj-y := core.o clock.o timer-ep93xx.o - -obj-$(CONFIG_EP93XX_DMA) += dma.o - -obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o -obj-$(CONFIG_MACH_TS72XX) += ts72xx.o -obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c deleted file mode 100644 index 85a496ddc619..000000000000 --- a/arch/arm/mach-ep93xx/clock.c +++ /dev/null @@ -1,733 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/clock.c - * Clock control for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include "hardware.h" - -#include <asm/div64.h> - -#include "soc.h" - -static DEFINE_SPINLOCK(clk_lock); - -static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; -static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; -static char pclk_divisors[] = { 1, 2, 4, 8 }; - -static char adc_divisors[] = { 16, 4 }; -static char sclk_divisors[] = { 2, 4 }; -static char lrclk_divisors[] = { 32, 64, 128 }; - -static const char * const mux_parents[] = { - "xtali", - "pll1", - "pll2" -}; - -/* - * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS - */ -static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word) -{ - int i; - - rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ - rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ - do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ - for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */ - rate >>= 1; - - return (unsigned long)rate; -} - -struct clk_psc { - struct clk_hw hw; - void __iomem *reg; - u8 bit_idx; - u32 mask; - u8 shift; - u8 width; - char *div; - u8 num_div; - spinlock_t *lock; -}; - -#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw) - -static int ep93xx_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = readl(psc->reg); - - return (val & BIT(psc->bit_idx)) ? 1 : 0; -} - -static int ep93xx_clk_enable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val |= BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static void ep93xx_clk_disable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); -} - -static const struct clk_ops clk_ep93xx_gate_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, -}; - -static struct clk_hw *ep93xx_clk_register_gate(const char *name, - const char *parent_name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ep93xx_gate_ops; - init.flags = CLK_SET_RATE_PARENT; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->hw.init = &init; - psc->lock = &clk_lock; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - - return &psc->hw; -} - -static u8 ep93xx_mux_get_parent(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - - if (!(val & EP93XX_SYSCON_CLKDIV_ESEL)) - return 0; - - if (!(val & EP93XX_SYSCON_CLKDIV_PSEL)) - return 1; - - return 2; -} - -static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (index >= ARRAY_SIZE(mux_parents)) - return -EINVAL; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL); - - - if (index != 0) { - val |= EP93XX_SYSCON_CLKDIV_ESEL; - val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0; - } - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static bool is_best(unsigned long rate, unsigned long now, - unsigned long best) -{ - return abs(rate - now) < abs(rate - best); -} - -static int ep93xx_mux_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - unsigned long rate = req->rate; - struct clk *best_parent = NULL; - unsigned long __parent_rate; - unsigned long best_rate = 0, actual_rate, mclk_rate; - unsigned long best_parent_rate; - int __div = 0, __pdiv = 0; - int i; - - /* - * Try the two pll's and the external clock - * Because the valid predividers are 2, 2.5 and 3, we multiply - * all the clocks by 2 to avoid floating point math. - * - * This is based on the algorithm in the ep93xx raster guide: - * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf - * - */ - for (i = 0; i < ARRAY_SIZE(mux_parents); i++) { - struct clk *parent = clk_get_sys(mux_parents[i], NULL); - - __parent_rate = clk_get_rate(parent); - mclk_rate = __parent_rate * 2; - - /* Try each predivider value */ - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - best_rate = actual_rate; - best_parent_rate = __parent_rate; - best_parent = parent; - } - } - } - - if (!best_parent) - return -EINVAL; - - req->best_parent_rate = best_parent_rate; - req->best_parent_hw = __clk_get_hw(best_parent); - req->rate = best_rate; - - return 0; -} - -static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long rate = 0; - u32 val = __raw_readl(psc->reg); - int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03); - int __div = val & 0x7f; - - if (__div > 0) - rate = (parent_rate * 2) / ((__pdiv + 3) * __div); - - return rate; -} - -static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - int pdiv = 0, div = 0; - unsigned long best_rate = 0, actual_rate, mclk_rate; - int __div = 0, __pdiv = 0; - u32 val; - - mclk_rate = parent_rate * 2; - - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - pdiv = __pdiv - 3; - div = __div; - best_rate = actual_rate; - } - } - - if (!best_rate) - return -EINVAL; - - val = __raw_readl(psc->reg); - - /* Clear old dividers */ - val &= ~0x37f; - - /* Set the new pdiv and div bits for the new clock rate */ - val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div; - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops clk_ddiv_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .get_parent = ep93xx_mux_get_parent, - .set_parent = ep93xx_mux_set_parent_lock, - .determine_rate = ep93xx_mux_determine_rate, - .recalc_rate = ep93xx_ddiv_recalc_rate, - .set_rate = ep93xx_ddiv_set_rate, -}; - -static struct clk_hw *clk_hw_register_ddiv(const char *name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ddiv_ops; - init.flags = 0; - init.parent_names = mux_parents; - init.num_parents = ARRAY_SIZE(mux_parents); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - u8 index = (val & psc->mask) >> psc->shift; - - if (index > psc->num_div) - return 0; - - return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]); -} - -static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long best = 0, now, maxdiv; - int i; - - maxdiv = psc->div[psc->num_div - 1]; - - for (i = 0; i < psc->num_div; i++) { - if ((rate * psc->div[i]) == *parent_rate) - return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - if (is_best(rate, now, best)) - best = now; - } - - if (!best) - best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv); - - return best; -} - -static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg) & ~psc->mask; - int i; - - for (i = 0; i < psc->num_div; i++) - if (rate == parent_rate / psc->div[i]) { - val |= i << psc->shift; - break; - } - - if (i == psc->num_div) - return -EINVAL; - - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops ep93xx_div_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .recalc_rate = ep93xx_div_recalc_rate, - .round_rate = ep93xx_div_round_rate, - .set_rate = ep93xx_div_set_rate, -}; - -static struct clk_hw *clk_hw_register_div(const char *name, - const char *parent_name, - void __iomem *reg, - u8 enable_bit, - u8 shift, - u8 width, - char *clk_divisors, - u8 num_div) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &ep93xx_div_ops; - init.flags = 0; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = 1; - - psc->reg = reg; - psc->bit_idx = enable_bit; - psc->mask = GENMASK(shift + width - 1, shift); - psc->shift = shift; - psc->div = clk_divisors; - psc->num_div = num_div; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -struct ep93xx_gate { - unsigned int bit; - const char *dev_id; - const char *con_id; -}; - -static struct ep93xx_gate ep93xx_uarts[] = { - {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL}, - {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL}, - {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL}, -}; - -static void __init ep93xx_uart_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - u32 value; - unsigned int clk_uart_div; - - value = __raw_readl(EP93XX_SYSCON_PWRCNT); - if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) - clk_uart_div = 1; - else - clk_uart_div = 2; - - hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div); - - /* parenting uart gate clocks to uart clock */ - for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) { - hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id, - "uart", - EP93XX_SYSCON_DEVCFG, - ep93xx_uarts[i].bit); - - clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id); - } -} - -static struct ep93xx_gate ep93xx_dmas[] = { - {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"}, -}; - -static void __init ep93xx_dma_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - int ret; - - for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) { - hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id, - "hclk", 0, - EP93XX_SYSCON_PWRCNT, - ep93xx_dmas[i].bit, - 0, - &clk_lock); - - ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL); - if (ret) - pr_err("%s: failed to register lookup %s\n", - __func__, ep93xx_dmas[i].con_id); - } -} - -static int __init ep93xx_clock_init(void) -{ - u32 value; - struct clk_hw *hw; - unsigned long clk_pll1_rate; - unsigned long clk_f_rate; - unsigned long clk_h_rate; - unsigned long clk_p_rate; - unsigned long clk_pll2_rate; - unsigned int clk_f_div; - unsigned int clk_h_div; - unsigned int clk_p_div; - unsigned int clk_usb_div; - unsigned long clk_spi_div; - - hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE); - clk_hw_register_clkdev(hw, NULL, "xtali"); - - /* Determine the bootloader configured pll1 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET1); - if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1)) - clk_pll1_rate = EP93XX_EXT_CLK_RATE; - else - clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - - hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate); - clk_hw_register_clkdev(hw, NULL, "pll1"); - - /* Initialize the pll1 derived clocks */ - clk_f_div = fclk_divisors[(value >> 25) & 0x7]; - clk_h_div = hclk_divisors[(value >> 20) & 0x7]; - clk_p_div = pclk_divisors[(value >> 18) & 0x3]; - - hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div); - clk_f_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div); - clk_h_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div); - clk_p_rate = clk_get_rate(hw->clk); - - clk_hw_register_clkdev(hw, "apb_pclk", NULL); - - ep93xx_dma_clock_init(); - - /* Determine the bootloader configured pll2 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET2); - if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2)) - clk_pll2_rate = EP93XX_EXT_CLK_RATE; - else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN) - clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - else - clk_pll2_rate = 0; - - hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate); - clk_hw_register_clkdev(hw, NULL, "pll2"); - - /* Initialize the pll2 derived clocks */ - /* - * These four bits set the divide ratio between the PLL2 - * output and the USB clock. - * 0000 - Divide by 1 - * 0001 - Divide by 2 - * 0010 - Divide by 3 - * 0011 - Divide by 4 - * 0100 - Divide by 5 - * 0101 - Divide by 6 - * 0110 - Divide by 7 - * 0111 - Divide by 8 - * 1000 - Divide by 9 - * 1001 - Divide by 10 - * 1010 - Divide by 11 - * 1011 - Divide by 12 - * 1100 - Divide by 13 - * 1101 - Divide by 14 - * 1110 - Divide by 15 - * 1111 - Divide by 1 - * On power-on-reset these bits are reset to 0000b. - */ - clk_usb_div = (((value >> 28) & 0xf) + 1); - hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div); - hw = clk_hw_register_gate(NULL, "ohci-platform", - "usb_clk", 0, - EP93XX_SYSCON_PWRCNT, - EP93XX_SYSCON_PWRCNT_USH_EN, - 0, - &clk_lock); - clk_hw_register_clkdev(hw, NULL, "ohci-platform"); - - /* - * EP93xx SSP clock rate was doubled in version E2. For more information - * see: - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - clk_spi_div = 1; - if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) - clk_spi_div = 2; - hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div); - clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0"); - - /* pwm clock */ - hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1); - clk_hw_register_clkdev(hw, "pwm_clk", NULL); - - pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", - clk_pll1_rate / 1000000, clk_pll2_rate / 1000000); - pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", - clk_f_rate / 1000000, clk_h_rate / 1000000, - clk_p_rate / 1000000); - - ep93xx_uart_clock_init(); - - /* touchscreen/adc clock */ - hw = clk_hw_register_div("ep93xx-adc", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_TSEN, - EP93XX_SYSCON_KEYTCHCLKDIV_ADIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-adc"); - - /* keypad clock */ - hw = clk_hw_register_div("ep93xx-keypad", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_KEN, - EP93XX_SYSCON_KEYTCHCLKDIV_KDIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad"); - - /* On reset PDIV and VDIV is set to zero, while PDIV zero - * means clock disable, VDIV shouldn't be zero. - * So i set both dividers to minimum. - */ - /* ENA - Enable CLK divider. */ - /* PDIV - 00 - Disable clock */ - /* VDIV - at least 2 */ - /* Check and enable video clk registers */ - value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV); - - /* check and enable i2s clk registers */ - value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV); - - /* video clk */ - hw = clk_hw_register_ddiv("ep93xx-fb", - EP93XX_SYSCON_VIDCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-fb"); - - /* i2s clk */ - hw = clk_hw_register_ddiv("mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s"); - - /* i2s sclk */ -#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16 -#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1 - hw = clk_hw_register_div("sclk", - "mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_SDIV_SHIFT, - EP93XX_I2SCLKDIV_SDIV_WIDTH, - sclk_divisors, - ARRAY_SIZE(sclk_divisors)); - - clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s"); - - /* i2s lrclk */ -#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17 -#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3 - hw = clk_hw_register_div("lrclk", - "sclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_LRDIV32_SHIFT, - EP93XX_I2SCLKDIV_LRDIV32_WIDTH, - lrclk_divisors, - ARRAY_SIZE(lrclk_divisors)); - - clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s"); - - return 0; -} -postcore_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c deleted file mode 100644 index 8b1ec60a9a46..000000000000 --- a/arch/arm/mach-ep93xx/core.c +++ /dev/null @@ -1,1018 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/core.c - * Core routines for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * Thanks go to Michael Burian and Ray Lehtiniemi for their key - * role in the ep93xx linux community. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> -#include <linux/sys_soc.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/uaccess.h> -#include <linux/termios.h> -#include <linux/amba/bus.h> -#include <linux/amba/serial.h> -#include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/gpio/machine.h> -#include <linux/spi/spi.h> -#include <linux/export.h> -#include <linux/irqchip/arm-vic.h> -#include <linux/reboot.h> -#include <linux/usb/ohci_pdriver.h> -#include <linux/random.h> - -#include "hardware.h" -#include <linux/platform_data/video-ep93xx.h> -#include <linux/platform_data/keypad-ep93xx.h> -#include <linux/platform_data/spi-ep93xx.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include "gpio-ep93xx.h" - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "soc.h" -#include "irqs.h" - -/************************************************************************* - * Static I/O mappings that are needed for all EP93xx platforms - *************************************************************************/ -static struct map_desc ep93xx_io_desc[] __initdata = { - { - .virtual = EP93XX_AHB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), - .length = EP93XX_AHB_SIZE, - .type = MT_DEVICE, - }, { - .virtual = EP93XX_APB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), - .length = EP93XX_APB_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init ep93xx_map_io(void) -{ - iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); -} - -/************************************************************************* - * EP93xx IRQ handling - *************************************************************************/ -void __init ep93xx_init_irq(void) -{ - vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0); - vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0); -} - - -/************************************************************************* - * EP93xx System Controller Software Locked register handling - *************************************************************************/ - -/* - * syscon_swlock prevents anything else from writing to the syscon - * block while a software locked register is being written. - */ -static DEFINE_SPINLOCK(syscon_swlock); - -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) -{ - unsigned long flags; - - spin_lock_irqsave(&syscon_swlock, flags); - - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, reg); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&syscon_swlock, flags); - - val = __raw_readl(EP93XX_SYSCON_DEVCFG); - val &= ~clear_bits; - val |= set_bits; - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, EP93XX_SYSCON_DEVCFG); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -/** - * ep93xx_chip_revision() - returns the EP93xx chip revision - * - * See "platform.h" for more information. - */ -unsigned int ep93xx_chip_revision(void) -{ - unsigned int v; - - v = __raw_readl(EP93XX_SYSCON_SYSCFG); - v &= EP93XX_SYSCON_SYSCFG_REV_MASK; - v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; - return v; -} -EXPORT_SYMBOL_GPL(ep93xx_chip_revision); - -/************************************************************************* - * EP93xx GPIO - *************************************************************************/ -static struct resource ep93xx_gpio_resource[] = { - DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX), -}; - -static struct platform_device ep93xx_gpio_device = { - .name = "gpio-ep93xx", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), - .resource = ep93xx_gpio_resource, -}; - -/************************************************************************* - * EP93xx peripheral handling - *************************************************************************/ -#define EP93XX_UART_MCR_OFFSET (0x0100) - -static void ep93xx_uart_set_mctrl(struct amba_device *dev, - void __iomem *base, unsigned int mctrl) -{ - unsigned int mcr; - - mcr = 0; - if (mctrl & TIOCM_RTS) - mcr |= 2; - if (mctrl & TIOCM_DTR) - mcr |= 1; - - __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); -} - -static struct amba_pl010_data ep93xx_uart_data = { - .set_mctrl = ep93xx_uart_set_mctrl, -}; - -static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, - { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); - -static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, - { IRQ_EP93XX_UART2 }, NULL); - -static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, - { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); - -static struct resource ep93xx_rtc_resource[] = { - DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c), -}; - -static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), - .resource = ep93xx_rtc_resource, -}; - -/************************************************************************* - * EP93xx OHCI USB Host - *************************************************************************/ - -static struct clk *ep93xx_ohci_host_clock; - -static int ep93xx_ohci_power_on(struct platform_device *pdev) -{ - if (!ep93xx_ohci_host_clock) { - ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(ep93xx_ohci_host_clock)) - return PTR_ERR(ep93xx_ohci_host_clock); - } - - return clk_prepare_enable(ep93xx_ohci_host_clock); -} - -static void ep93xx_ohci_power_off(struct platform_device *pdev) -{ - clk_disable(ep93xx_ohci_host_clock); -} - -static struct usb_ohci_pdata ep93xx_ohci_pdata = { - .power_on = ep93xx_ohci_power_on, - .power_off = ep93xx_ohci_power_off, - .power_suspend = ep93xx_ohci_power_off, -}; - -static struct resource ep93xx_ohci_resources[] = { - DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000), - DEFINE_RES_IRQ(IRQ_EP93XX_USB), -}; - -static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_ohci_device = { - .name = "ohci-platform", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), - .resource = ep93xx_ohci_resources, - .dev = { - .dma_mask = &ep93xx_ohci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ep93xx_ohci_pdata, - }, -}; - -/************************************************************************* - * EP93xx physmap'ed flash - *************************************************************************/ -static struct physmap_flash_data ep93xx_flash_data; - -static struct resource ep93xx_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ep93xx_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ep93xx_flash_data, - }, - .num_resources = 1, - .resource = &ep93xx_flash_resource, -}; - -/** - * ep93xx_register_flash() - Register the external flash device. - * @width: bank width in octets - * @start: resource start address - * @size: resource size - */ -void __init ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size) -{ - ep93xx_flash_data.width = width; - - ep93xx_flash_resource.start = start; - ep93xx_flash_resource.end = start + size - 1; - - platform_device_register(&ep93xx_flash); -} - - -/************************************************************************* - * EP93xx ethernet peripheral handling - *************************************************************************/ -static struct ep93xx_eth_data ep93xx_eth_data; - -static struct resource ep93xx_eth_resource[] = { - DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000), - DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET), -}; - -static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_eth_device = { - .name = "ep93xx-eth", - .id = -1, - .dev = { - .platform_data = &ep93xx_eth_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_eth_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_eth_resource), - .resource = ep93xx_eth_resource, -}; - -/** - * ep93xx_register_eth - Register the built-in ethernet platform device. - * @data: platform specific ethernet configuration (__initdata) - * @copy_addr: flag indicating that the MAC address should be copied - * from the IndAd registers (as programmed by the bootloader) - */ -void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) -{ - if (copy_addr) - memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6); - - ep93xx_eth_data = *data; - platform_device_register(&ep93xx_eth_device); -} - - -/************************************************************************* - * EP93xx i2c peripheral handling - *************************************************************************/ - -/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ -static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { - .dev_id = "i2c-gpio.0", - .table = { - /* Use local offsets on gpiochip/port "G" */ - GPIO_LOOKUP_IDX("G", 1, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("G", 0, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - { } - }, -}; - -static struct platform_device ep93xx_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -/** - * ep93xx_register_i2c - Register the i2c platform device. - * @devices: platform specific i2c bus device information (__initdata) - * @num: the number of devices on the i2c bus - */ -void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) -{ - /* - * FIXME: this just sets the two pins as non-opendrain, as no - * platforms tries to do that anyway. Flag the applicable lines - * as open drain in the GPIO_LOOKUP above and the driver or - * gpiolib will handle open drain/open drain emulation as need - * be. Right now i2c-gpio emulates open drain which is not - * optimal. - */ - __raw_writel((0 << 1) | (0 << 0), - EP93XX_GPIO_EEDRIVE); - - i2c_register_board_info(0, devices, num); - gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); - platform_device_register(&ep93xx_i2c_device); -} - -/************************************************************************* - * EP93xx SPI peripheral handling - *************************************************************************/ -static struct ep93xx_spi_info ep93xx_spi_master_data; - -static struct resource ep93xx_spi_resources[] = { - DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18), - DEFINE_RES_IRQ(IRQ_EP93XX_SSP), -}; - -static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_spi_device = { - .name = "ep93xx-spi", - .id = 0, - .dev = { - .platform_data = &ep93xx_spi_master_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_spi_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_spi_resources), - .resource = ep93xx_spi_resources, -}; - -/** - * ep93xx_register_spi() - registers spi platform device - * @info: ep93xx board specific spi master info (__initdata) - * @devices: SPI devices to register (__initdata) - * @num: number of SPI devices to register - * - * This function registers platform device for the EP93xx SPI controller and - * also makes sure that SPI pins are muxed so that I2S is not using those pins. - */ -void __init ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num) -{ - /* - * When SPI is used, we need to make sure that I2S is muxed off from - * SPI pins. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); - - ep93xx_spi_master_data = *info; - spi_register_board_info(devices, num); - platform_device_register(&ep93xx_spi_device); -} - -/************************************************************************* - * EP93xx LEDs - *************************************************************************/ -static const struct gpio_led ep93xx_led_pins[] __initconst = { - { - .name = "platform:grled", - }, { - .name = "platform:rdled", - }, -}; - -static const struct gpio_led_platform_data ep93xx_led_data __initconst = { - .num_leds = ARRAY_SIZE(ep93xx_led_pins), - .leds = ep93xx_led_pins, -}; - -static struct gpiod_lookup_table ep93xx_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - /* Use local offsets on gpiochip/port "E" */ - GPIO_LOOKUP_IDX("E", 0, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("E", 1, NULL, 1, GPIO_ACTIVE_HIGH), - { } - }, -}; - -/************************************************************************* - * EP93xx pwm peripheral handling - *************************************************************************/ -static struct resource ep93xx_pwm0_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10), -}; - -static struct platform_device ep93xx_pwm0_device = { - .name = "ep93xx-pwm", - .id = 0, - .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource), - .resource = ep93xx_pwm0_resource, -}; - -static struct resource ep93xx_pwm1_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10), -}; - -static struct platform_device ep93xx_pwm1_device = { - .name = "ep93xx-pwm", - .id = 1, - .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource), - .resource = ep93xx_pwm1_resource, -}; - -void __init ep93xx_register_pwm(int pwm0, int pwm1) -{ - if (pwm0) - platform_device_register(&ep93xx_pwm0_device); - - /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */ - if (pwm1) - platform_device_register(&ep93xx_pwm1_device); -} - -int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) -{ - int err; - - if (pdev->id == 0) { - err = 0; - } else if (pdev->id == 1) { - err = gpio_request(EP93XX_GPIO_LINE_EGPIO14, - dev_name(&pdev->dev)); - if (err) - return err; - err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0); - if (err) - goto fail; - - /* PWM 1 output on EGPIO[14] */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG); - } else { - err = -ENODEV; - } - - return err; - -fail: - gpio_free(EP93XX_GPIO_LINE_EGPIO14); - return err; -} -EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio); - -void ep93xx_pwm_release_gpio(struct platform_device *pdev) -{ - if (pdev->id == 1) { - gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14); - gpio_free(EP93XX_GPIO_LINE_EGPIO14); - - /* EGPIO[14] used for GPIO */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG); - } -} -EXPORT_SYMBOL(ep93xx_pwm_release_gpio); - - -/************************************************************************* - * EP93xx video peripheral handling - *************************************************************************/ -static struct ep93xxfb_mach_info ep93xxfb_data; - -static struct resource ep93xx_fb_resource[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800), -}; - -static struct platform_device ep93xx_fb_device = { - .name = "ep93xx-fb", - .id = -1, - .dev = { - .platform_data = &ep93xxfb_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_fb_resource), - .resource = ep93xx_fb_resource, -}; - -/* The backlight use a single register in the framebuffer's register space */ -#define EP93XX_RASTER_REG_BRIGHTNESS 0x20 - -static struct resource ep93xx_bl_resources[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE + - EP93XX_RASTER_REG_BRIGHTNESS, 0x04), -}; - -static struct platform_device ep93xx_bl_device = { - .name = "ep93xx-bl", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_bl_resources), - .resource = ep93xx_bl_resources, -}; - -/** - * ep93xx_register_fb - Register the framebuffer platform device. - * @data: platform specific framebuffer configuration (__initdata) - */ -void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) -{ - ep93xxfb_data = *data; - platform_device_register(&ep93xx_fb_device); - platform_device_register(&ep93xx_bl_device); -} - - -/************************************************************************* - * EP93xx matrix keypad peripheral handling - *************************************************************************/ -static struct ep93xx_keypad_platform_data ep93xx_keypad_data; - -static struct resource ep93xx_keypad_resource[] = { - DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c), - DEFINE_RES_IRQ(IRQ_EP93XX_KEY), -}; - -static struct platform_device ep93xx_keypad_device = { - .name = "ep93xx-keypad", - .id = -1, - .dev = { - .platform_data = &ep93xx_keypad_data, - }, - .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), - .resource = ep93xx_keypad_resource, -}; - -/** - * ep93xx_register_keypad - Register the keypad platform device. - * @data: platform specific keypad configuration (__initdata) - */ -void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) -{ - ep93xx_keypad_data = *data; - platform_device_register(&ep93xx_keypad_device); -} - -int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) -{ - int err; - int i; - - for (i = 0; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_c; - err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_d; - } - - /* Enable the keypad controller; GPIO ports C and D used for keypad */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK); - - return 0; - -fail_gpio_d: - gpio_free(EP93XX_GPIO_LINE_C(i)); -fail_gpio_c: - for (--i; i >= 0; --i) { - gpio_free(EP93XX_GPIO_LINE_C(i)); - gpio_free(EP93XX_GPIO_LINE_D(i)); - } - return err; -} -EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio); - -void ep93xx_keypad_release_gpio(struct platform_device *pdev) -{ - int i; - - for (i = 0; i < 8; i++) { - gpio_free(EP93XX_GPIO_LINE_C(i)); - gpio_free(EP93XX_GPIO_LINE_D(i)); - } - - /* Disable the keypad controller; GPIO ports C and D used for GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK); -} -EXPORT_SYMBOL(ep93xx_keypad_release_gpio); - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ(IRQ_EP93XX_SAI), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -static struct platform_device ep93xx_pcm_device = { - .name = "ep93xx-pcm-audio", - .id = -1, -}; - -void __init ep93xx_register_i2s(void) -{ - platform_device_register(&ep93xx_i2s_device); - platform_device_register(&ep93xx_pcm_device); -} - -#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \ - EP93XX_SYSCON_DEVCFG_I2SONAC97) - -#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ - EP93XX_SYSCON_I2SCLKDIV_SPOL) - -int ep93xx_i2s_acquire(void) -{ - unsigned val; - - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, - EP93XX_SYSCON_DEVCFG_I2S_MASK); - - /* - * This is potentially racy with the clock api for i2s_mclk, sclk and - * lrclk. Since the i2s driver is the only user of those clocks we - * rely on it to prevent parallel use of this function and the - * clock api for the i2s clocks. - */ - val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - val &= ~EP93XX_I2SCLKDIV_MASK; - val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; - ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); - - return 0; -} -EXPORT_SYMBOL(ep93xx_i2s_acquire); - -void ep93xx_i2s_release(void) -{ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); -} -EXPORT_SYMBOL(ep93xx_i2s_release); - -/************************************************************************* - * EP93xx AC97 audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_ac97_resources[] = { - DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac), - DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR), -}; - -static struct platform_device ep93xx_ac97_device = { - .name = "ep93xx-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ac97_resources), - .resource = ep93xx_ac97_resources, -}; - -void __init ep93xx_register_ac97(void) -{ - /* - * Make sure that the AC97 pins are not used by I2S. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - - platform_device_register(&ep93xx_ac97_device); - platform_device_register(&ep93xx_pcm_device); -} - -/************************************************************************* - * EP93xx Watchdog - *************************************************************************/ -static struct resource ep93xx_wdt_resources[] = { - DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08), -}; - -static struct platform_device ep93xx_wdt_device = { - .name = "ep93xx-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_wdt_resources), - .resource = ep93xx_wdt_resources, -}; - -/************************************************************************* - * EP93xx IDE - *************************************************************************/ -static struct resource ep93xx_ide_resources[] = { - DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), - DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), -}; - -static struct platform_device ep93xx_ide_device = { - .name = "ep93xx-ide", - .id = -1, - .dev = { - .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(ep93xx_ide_resources), - .resource = ep93xx_ide_resources, -}; - -void __init ep93xx_register_ide(void) -{ - platform_device_register(&ep93xx_ide_device); -} - -int ep93xx_ide_acquire_gpio(struct platform_device *pdev) -{ - int err; - int i; - - err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); - if (err) - return err; - err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); - if (err) - goto fail_egpio15; - for (i = 2; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_e; - } - for (i = 4; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_g; - } - for (i = 0; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_h; - } - - /* GPIO ports E[7:2], G[7:4] and H used by IDE */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - return 0; - -fail_gpio_h: - for (--i; i >= 0; --i) - gpio_free(EP93XX_GPIO_LINE_H(i)); - i = 8; -fail_gpio_g: - for (--i; i >= 4; --i) - gpio_free(EP93XX_GPIO_LINE_G(i)); - i = 8; -fail_gpio_e: - for (--i; i >= 2; --i) - gpio_free(EP93XX_GPIO_LINE_E(i)); - gpio_free(EP93XX_GPIO_LINE_EGPIO15); -fail_egpio15: - gpio_free(EP93XX_GPIO_LINE_EGPIO2); - return err; -} -EXPORT_SYMBOL(ep93xx_ide_acquire_gpio); - -void ep93xx_ide_release_gpio(struct platform_device *pdev) -{ - int i; - - for (i = 2; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_E(i)); - for (i = 4; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_G(i)); - for (i = 0; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_H(i)); - gpio_free(EP93XX_GPIO_LINE_EGPIO15); - gpio_free(EP93XX_GPIO_LINE_EGPIO2); - - - /* GPIO ports E[7:2], G[7:4] and H used by GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); -} -EXPORT_SYMBOL(ep93xx_ide_release_gpio); - -/************************************************************************* - * EP93xx ADC - *************************************************************************/ -static struct resource ep93xx_adc_resources[] = { - DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28), - DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH), -}; - -static struct platform_device ep93xx_adc_device = { - .name = "ep93xx-adc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_adc_resources), - .resource = ep93xx_adc_resources, -}; - -void __init ep93xx_register_adc(void) -{ - /* Power up ADC, deactivate Touch Screen Controller */ - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN, - EP93XX_SYSCON_DEVCFG_ADCPD); - - platform_device_register(&ep93xx_adc_device); -} - -/************************************************************************* - * EP93xx Security peripheral - *************************************************************************/ - -/* - * The Maverick Key is 256 bits of micro fuses blown at the factory during - * manufacturing to uniquely identify a part. - * - * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key - */ -#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x)) -#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400) -#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410) -#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440) -#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450) -#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460) -#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500) -#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504) -#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520) -#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524) -#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700) -#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704) -#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708) -#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c) - -static char ep93xx_soc_id[33]; - -static const char __init *ep93xx_get_soc_id(void) -{ - unsigned int id, id2, id3, id4, id5; - - if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1) - return "bad Hamming code"; - - id = __raw_readl(EP93XX_SECURITY_UNIQID); - id2 = __raw_readl(EP93XX_SECURITY_UNIQID2); - id3 = __raw_readl(EP93XX_SECURITY_UNIQID3); - id4 = __raw_readl(EP93XX_SECURITY_UNIQID4); - id5 = __raw_readl(EP93XX_SECURITY_UNIQID5); - - if (id != id2) - return "invalid"; - - /* Toss the unique ID into the entropy pool */ - add_device_randomness(&id2, 4); - add_device_randomness(&id3, 4); - add_device_randomness(&id4, 4); - add_device_randomness(&id5, 4); - - snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id), - "%08x%08x%08x%08x", id2, id3, id4, id5); - - return ep93xx_soc_id; -} - -static const char __init *ep93xx_get_soc_rev(void) -{ - int rev = ep93xx_chip_revision(); - - switch (rev) { - case EP93XX_CHIP_REV_D0: - return "D0"; - case EP93XX_CHIP_REV_D1: - return "D1"; - case EP93XX_CHIP_REV_E0: - return "E0"; - case EP93XX_CHIP_REV_E1: - return "E1"; - case EP93XX_CHIP_REV_E2: - return "E2"; - default: - return "unknown"; - } -} - -static const char __init *ep93xx_get_machine_name(void) -{ - return kasprintf(GFP_KERNEL,"%s", machine_desc->name); -} - -static struct device __init *ep93xx_init_soc(void) -{ - struct soc_device_attribute *soc_dev_attr; - struct soc_device *soc_dev; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - return NULL; - - soc_dev_attr->machine = ep93xx_get_machine_name(); - soc_dev_attr->family = "Cirrus Logic EP93xx"; - soc_dev_attr->revision = ep93xx_get_soc_rev(); - soc_dev_attr->soc_id = ep93xx_get_soc_id(); - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr->machine); - kfree(soc_dev_attr); - return NULL; - } - - return soc_device_to_device(soc_dev); -} - -struct device __init *ep93xx_init_devices(void) -{ - struct device *parent; - - /* Disallow access to MaverickCrunch initially */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - - /* Default all ports to GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - parent = ep93xx_init_soc(); - - /* Get the GPIO working early, other devices need it */ - platform_device_register(&ep93xx_gpio_device); - - amba_device_register(&uart1_device, &iomem_resource); - amba_device_register(&uart2_device, &iomem_resource); - amba_device_register(&uart3_device, &iomem_resource); - - platform_device_register(&ep93xx_rtc_device); - platform_device_register(&ep93xx_ohci_device); - platform_device_register(&ep93xx_wdt_device); - - gpiod_add_lookup_table(&ep93xx_leds_gpio_table); - gpio_led_register_device(-1, &ep93xx_led_data); - - return parent; -} - -void ep93xx_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Set then clear the SWRST bit to initiate a software reset - */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST); - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST); - - while (1) - ; -} diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c deleted file mode 100644 index 74515acab8ef..000000000000 --- a/arch/arm/mach-ep93xx/dma.c +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/dma.c - * - * Platform support code for the EP93xx dmaengine driver. - * - * Copyright (C) 2011 Mika Westerberg - * - * This work is based on the original dma-m2p implementation with - * following copyrights: - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2006 Applied Data Systems - * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> - */ - -#include <linux/dmaengine.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/platform_data/dma-ep93xx.h> -#include "hardware.h" - -#include "soc.h" - -#define DMA_CHANNEL(_name, _base, _irq) \ - { .name = (_name), .base = (_base), .irq = (_irq) } - -/* - * DMA M2P channels. - * - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { - DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), - DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), - DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), - DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), - DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), - DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), - DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), - DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), - DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), - DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { - .channels = ep93xx_dma_m2p_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), -}; - -static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2p_device = { - .name = "ep93xx-dma-m2p", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2p_data, - .dma_mask = &ep93xx_dma_m2p_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* - * DMA M2M channels. - * - * There are 2 M2M channels which support memcpy/memset and in addition simple - * hardware requests from/to SSP and IDE. We do not implement an external - * hardware requests. - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { - DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), - DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { - .channels = ep93xx_dma_m2m_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), -}; - -static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2m_device = { - .name = "ep93xx-dma-m2m", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2m_data, - .dma_mask = &ep93xx_dma_m2m_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static int __init ep93xx_dma_init(void) -{ - platform_device_register(&ep93xx_dma_m2p_device); - platform_device_register(&ep93xx_dma_m2m_device); - return 0; -} -arch_initcall(ep93xx_dma_init); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c deleted file mode 100644 index dbdb822a0100..000000000000 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ /dev/null @@ -1,368 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/edb93xx.c - * Cirrus Logic EDB93xx Development Board support. - * - * EDB93XX, EDB9301, EDB9307A - * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com> - * - * EDB9302 - * Copyright (C) 2006 George Kashperko <george@chas.com.ua> - * - * EDB9302A, EDB9315, EDB9315A - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * EDB9307 - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * EDB9312 - * Copyright (C) 2006 Infosys Technologies Limited - * Toufeeq Hussain <toufeeq_hussain@infosys.com> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/spi/spi.h> -#include <linux/gpio/machine.h> - -#include <sound/cs4271.h> - -#include "hardware.h" -#include <linux/platform_data/video-ep93xx.h> -#include <linux/platform_data/spi-ep93xx.h> -#include "gpio-ep93xx.h" - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "soc.h" - -static void __init edb93xx_register_flash(void) -{ - if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { - ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); - } else { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } -} - -static struct ep93xx_eth_data __initdata edb93xx_eth_data = { - .phy_id = 1, -}; - - -/************************************************************************* - * EDB93xx i2c peripheral handling - *************************************************************************/ - -static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - }, -}; - -static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = { - { - I2C_BOARD_INFO("ds1337", 0x68), - }, -}; - -static void __init edb93xx_register_i2c(void) -{ - if (machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()) { - ep93xx_register_i2c(edb93xxa_i2c_board_info, - ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9302() || machine_is_edb9307() - || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(edb93xx_i2c_board_info, - ARRAY_SIZE(edb93xx_i2c_board_info)); - } -} - - -/************************************************************************* - * EDB93xx SPI peripheral handling - *************************************************************************/ -static struct cs4271_platform_data edb93xx_cs4271_data = { - /* Intentionally left blank */ -}; - -static struct spi_board_info edb93xx_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &edb93xx_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void __init edb93xx_register_spi(void) -{ - if (machine_is_edb9301() || machine_is_edb9302()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table); - else if (machine_is_edb9302a() || machine_is_edb9307a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table); - else if (machine_is_edb9315a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table); - - gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); - ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, - ARRAY_SIZE(edb93xx_spi_board_info)); -} - - -/************************************************************************* - * EDB93xx I2S - *************************************************************************/ -static struct platform_device edb93xx_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static int __init edb93xx_has_audio(void) -{ - return (machine_is_edb9301() || machine_is_edb9302() || - machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()); -} - -static void __init edb93xx_register_i2s(void) -{ - if (edb93xx_has_audio()) { - ep93xx_register_i2s(); - platform_device_register(&edb93xx_audio_device); - } -} - - -/************************************************************************* - * EDB93xx pwm - *************************************************************************/ -static void __init edb93xx_register_pwm(void) -{ - if (machine_is_edb9301() || - machine_is_edb9302() || machine_is_edb9302a()) { - /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */ - ep93xx_register_pwm(0, 1); - } else if (machine_is_edb9307() || machine_is_edb9307a()) { - /* EP9307 only has pwm.0 (PWMOUT) */ - ep93xx_register_pwm(1, 0); - } else { - /* EP9312 and EP9315 have both */ - ep93xx_register_pwm(1, 1); - } -} - - -/************************************************************************* - * EDB93xx framebuffer - *************************************************************************/ -static struct ep93xxfb_mach_info __initdata edb93xxfb_info = { - .flags = 0, -}; - -static int __init edb93xx_has_fb(void) -{ - /* These platforms have an ep93xx with video capability */ - return machine_is_edb9307() || machine_is_edb9307a() || - machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_fb(void) -{ - if (!edb93xx_has_fb()) - return; - - if (machine_is_edb9307a() || machine_is_edb9315a()) - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0; - else - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3; - - ep93xx_register_fb(&edb93xxfb_info); -} - - -/************************************************************************* - * EDB93xx IDE - *************************************************************************/ -static int __init edb93xx_has_ide(void) -{ - /* - * Although EDB9312 and EDB9315 do have IDE capability, they have - * INTRQ line wired as pull-up, which makes using IDE interface - * problematic. - */ - return machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_ide(void) -{ - if (!edb93xx_has_ide()) - return; - - ep93xx_register_ide(); -} - - -static void __init edb93xx_init_machine(void) -{ - ep93xx_init_devices(); - edb93xx_register_flash(); - ep93xx_register_eth(&edb93xx_eth_data, 1); - edb93xx_register_i2c(); - edb93xx_register_spi(); - edb93xx_register_i2s(); - edb93xx_register_pwm(); - edb93xx_register_fb(); - edb93xx_register_ide(); - ep93xx_register_adc(); -} - - -#ifdef CONFIG_MACH_EDB9301 -MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302 -MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") - /* Maintainer: George Kashperko <george@chas.com.ua> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302A -MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307 -MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307A -MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9312 -MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") - /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315 -MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315A -MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h deleted file mode 100644 index 8fa3646de0a4..000000000000 --- a/arch/arm/mach-ep93xx/ep93xx-regs.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_EP93XX_REGS_H -#define __ASM_ARCH_EP93XX_REGS_H - -/* - * EP93xx linux memory map: - * - * virt phys size - * fe800000 5M per-platform mappings - * fed00000 80800000 2M APB - * fef00000 80000000 1M AHB - */ - -#define EP93XX_AHB_PHYS_BASE 0x80000000 -#define EP93XX_AHB_VIRT_BASE 0xfef00000 -#define EP93XX_AHB_SIZE 0x00100000 - -#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x)) -#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x)) - -#define EP93XX_APB_PHYS_BASE 0x80800000 -#define EP93XX_APB_VIRT_BASE 0xfed00000 -#define EP93XX_APB_SIZE 0x00200000 - -#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) -#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) - -/* APB UARTs */ -#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) -#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) - -#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000) -#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000) - -#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) -#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) - -#endif diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h deleted file mode 100644 index 7b46eb7e5507..000000000000 --- a/arch/arm/mach-ep93xx/gpio-ep93xx.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Include file for the EP93XX GPIO controller machine specifics */ - -#ifndef __GPIO_EP93XX_H -#define __GPIO_EP93XX_H - -#include "ep93xx-regs.h" - -#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) -#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -#endif /* __GPIO_EP93XX_H */ diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h deleted file mode 100644 index e7d850e04782..000000000000 --- a/arch/arm/mach-ep93xx/hardware.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/hardware.h - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "platform.h" - -/* - * The EP93xx has two external crystal oscillators. To generate the - * required high-frequency clocks, the processor uses two phase-locked- - * loops (PLLs) to multiply the incoming external clock signal to much - * higher frequencies that are then divided down by programmable dividers - * to produce the needed clocks. The PLLs operate independently of one - * another. - */ -#define EP93XX_EXT_CLK_RATE 14745600 -#define EP93XX_EXT_RTC_RATE 32768 - -#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4) -#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16) - -#endif diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h deleted file mode 100644 index 353201b90c66..000000000000 --- a/arch/arm/mach-ep93xx/irqs.h +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_EP93XX_VIC0 1 - -#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2) -#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3) -#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4) -#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5) -#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6) -#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7) -#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8) -#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9) -#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10) -#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11) -#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12) -#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13) -#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14) -#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15) -#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16) -#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17) -#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18) -#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19) -#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20) -#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21) -#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22) -#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23) -#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24) -#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25) -#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26) -#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27) -#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28) -#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29) -#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30) -#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc - -#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32) - -#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0) -#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1) -#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2) -#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3) -#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4) -#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5) -#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6) -#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7) -#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8) -#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9) -#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10) -#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11) -#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12) -#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13) -#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14) -#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15) -#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16) -#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17) -#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18) -#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19) -#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20) -#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21) -#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22) -#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23) -#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24) -#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25) -#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26) -#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27) -#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28) -#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff - -#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24) - -#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -#define EP93XX_BOARD_IRQS 32 - -#endif diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h deleted file mode 100644 index 5fb1b919133f..000000000000 --- a/arch/arm/mach-ep93xx/platform.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/platform.h - */ - -#ifndef __ASSEMBLY__ - -#include <linux/platform_data/eth-ep93xx.h> -#include <linux/reboot.h> - -struct device; -struct i2c_board_info; -struct spi_board_info; -struct platform_device; -struct ep93xxfb_mach_info; -struct ep93xx_keypad_platform_data; -struct ep93xx_spi_info; - -void ep93xx_map_io(void); -void ep93xx_init_irq(void); - -void ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size); - -void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_board_info *devices, int num); -void ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num); -void ep93xx_register_fb(struct ep93xxfb_mach_info *data); -void ep93xx_register_pwm(int pwm0, int pwm1); -void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); -void ep93xx_register_i2s(void); -void ep93xx_register_ac97(void); -void ep93xx_register_ide(void); -void ep93xx_register_adc(void); - -struct device *ep93xx_init_devices(void); -extern void ep93xx_timer_init(void); - -void ep93xx_restart(enum reboot_mode, const char *); - -#endif diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h deleted file mode 100644 index 3245ebbd5069..000000000000 --- a/arch/arm/mach-ep93xx/soc.h +++ /dev/null @@ -1,212 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-ep93xx/soc.h - * - * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com> - * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com> - */ - -#ifndef _EP93XX_SOC_H -#define _EP93XX_SOC_H - -#include "ep93xx-regs.h" -#include "irqs.h" - -/* - * EP93xx Physical Memory Map: - * - * The ASDO pin is sampled at system reset to select a synchronous or - * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) - * the synchronous boot mode is selected. When ASDO is "0" (i.e - * pulled-down) the asynchronous boot mode is selected. - * - * In synchronous boot mode nSDCE3 is decoded starting at physical address - * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous - * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 - * decoded at 0xf0000000. - * - * There is known errata for the EP93xx dealing with External Memory - * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design - * Guidelines" for more information. This document can be found at: - * - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - -#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ -#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ -#define EP93XX_CS1_PHYS_BASE 0x10000000 -#define EP93XX_CS2_PHYS_BASE 0x20000000 -#define EP93XX_CS3_PHYS_BASE 0x30000000 -#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 -#define EP93XX_CS6_PHYS_BASE 0x60000000 -#define EP93XX_CS7_PHYS_BASE 0x70000000 -#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 -#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 -#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 -#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ -#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ - -/* AHB peripherals */ -#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) - -#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) -#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) - -#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) -#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) - -#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) -#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) - -#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) - -#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) -#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) - -#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) - -#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) - -/* APB peripherals */ -#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) - -#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) -#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) - -#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) - -#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) -#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) - -#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) -#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) - -#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) - -#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) -#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) - -#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000) -#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) - -#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) -#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) - -#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) -#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) - -#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000) -#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) - -/* System controller */ -#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) -#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) -#define EP93XX_SYSCON_PWRCNT_USH_EN 28 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16 -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) -#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) -#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) -#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) -#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) -#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) -#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) -#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) -#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) -#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) -#define EP93XX_SYSCON_DEVCFG_U3EN 24 -#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) -#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) -#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) -#define EP93XX_SYSCON_DEVCFG_U2EN 20 -#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) -#define EP93XX_SYSCON_DEVCFG_U1EN 18 -#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) -#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) -#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) -#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) -#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) -#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) -#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) -#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) -#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) -#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) -#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) -#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) -#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) -#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) -#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) -#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) -#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) -#define EP93XX_SYSCON_CLKDIV_ENABLE 15 -#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) -#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) -#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 -#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) -#define EP93XX_SYSCON_I2SCLKDIV_SENA 31 -#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) -#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) -#define EP93XX_I2SCLKDIV_SDIV (1 << 16) -#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) -#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) -#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) -#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) -#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) -#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31 -#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) -#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) -#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) -#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) -#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) -#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) -#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) -#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) -#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) -#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) -#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) -#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -/* EP93xx System Controller software locked register write */ -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); - -static inline void ep93xx_devcfg_set_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(bits, 0x00); -} - -static inline void ep93xx_devcfg_clear_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(0x00, bits); -} - -#endif /* _EP93XX_SOC_H */ diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c deleted file mode 100644 index a9efa7bc2fa1..000000000000 --- a/arch/arm/mach-ep93xx/timer-ep93xx.c +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/sched_clock.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/mach/time.h> -#include "soc.h" -#include "platform.h" - -/************************************************************************* - * Timer handling for EP93xx - ************************************************************************* - * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and - * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate - * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, - * is free-running, and can't generate interrupts. - * - * The 508 kHz timers are ideal for use for the timer interrupt, as the - * most common values of HZ divide 508 kHz nicely. We pick the 32 bit - * timer (timer 3) to get as long sleep intervals as possible when using - * CONFIG_NO_HZ. - * - * The higher clock rate of timer 4 makes it a better choice than the - * other timers for use as clock source and for sched_clock(), providing - * a stable 40 bit time base. - ************************************************************************* - */ -#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) -#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) -#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) -#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) -#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7) -#define EP93XX_TIMER123_CONTROL_MODE (1 << 6) -#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3) -#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) -#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) -#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) -#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) -#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) -#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) -#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) -#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8) -#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) -#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) -#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) -#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) - -#define EP93XX_TIMER123_RATE 508469 -#define EP93XX_TIMER4_RATE 983040 - -static u64 notrace ep93xx_read_sched_clock(void) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return ret; -} - -static u64 ep93xx_clocksource_read(struct clocksource *c) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return (u64) ret; -} - -static int ep93xx_clkevt_set_next_event(unsigned long next, - struct clock_event_device *evt) -{ - /* Default mode: periodic, off, 508 kHz */ - u32 tmode = EP93XX_TIMER123_CONTROL_MODE | - EP93XX_TIMER123_CONTROL_CLKSEL; - - /* Clear timer */ - writel(tmode, EP93XX_TIMER3_CONTROL); - - /* Set next event */ - writel(next, EP93XX_TIMER3_LOAD); - writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, - EP93XX_TIMER3_CONTROL); - return 0; -} - - -static int ep93xx_clkevt_shutdown(struct clock_event_device *evt) -{ - /* Disable timer */ - writel(0, EP93XX_TIMER3_CONTROL); - - return 0; -} - -static struct clock_event_device ep93xx_clockevent = { - .name = "timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_state_shutdown = ep93xx_clkevt_shutdown, - .set_state_oneshot = ep93xx_clkevt_shutdown, - .tick_resume = ep93xx_clkevt_shutdown, - .set_next_event = ep93xx_clkevt_set_next_event, - .rating = 300, -}; - -static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* Writing any value clears the timer interrupt */ - writel(1, EP93XX_TIMER3_CLEAR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -void __init ep93xx_timer_init(void) -{ - int irq = IRQ_EP93XX_TIMER3; - unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; - - /* Enable and register clocksource and sched_clock on timer 4 */ - writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, - EP93XX_TIMER4_VALUE_HIGH); - clocksource_mmio_init(NULL, "timer4", - EP93XX_TIMER4_RATE, 200, 40, - ep93xx_clocksource_read); - sched_clock_register(ep93xx_read_sched_clock, 40, - EP93XX_TIMER4_RATE); - - /* Set up clockevent on timer 3 */ - if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", - &ep93xx_clockevent)) - pr_err("Failed to request irq %d (ep93xx timer)\n", irq); - clockevents_config_and_register(&ep93xx_clockevent, - EP93XX_TIMER123_RATE, - 1, - 0xffffffffU); -} diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c deleted file mode 100644 index d3de7283ecb3..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ /dev/null @@ -1,422 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/ts72xx.c - * Technologic Systems TS72xx SBC support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/mtd/platnand.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/spi/mmc_spi.h> -#include <linux/mmc/host.h> -#include <linux/platform_data/spi-ep93xx.h> -#include <linux/gpio/machine.h> - -#include "gpio-ep93xx.h" -#include "hardware.h" - -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/mach/arch.h> - -#include "soc.h" -#include "ts72xx.h" - -/************************************************************************* - * IO map - *************************************************************************/ -static struct map_desc ts72xx_io_desc[] __initdata = { - { - .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), - .length = TS72XX_MODEL_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), - .length = TS72XX_OPTIONS_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), - .length = TS72XX_OPTIONS2_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE), - .length = TS72XX_CPLDVER_SIZE, - .type = MT_DEVICE, - } -}; - -static void __init ts72xx_map_io(void) -{ - ep93xx_map_io(); - iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); -} - - -/************************************************************************* - * NAND flash - *************************************************************************/ -#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */ -#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */ - -static void ts72xx_nand_hwcontrol(struct nand_chip *chip, - int cmd, unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr = chip->legacy.IO_ADDR_R; - unsigned char bits; - - addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE); - - bits = __raw_readb(addr) & ~0x07; - bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */ - bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */ - bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */ - - __raw_writeb(bits, addr); - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, chip->legacy.IO_ADDR_W); -} - -static int ts72xx_nand_device_ready(struct nand_chip *chip) -{ - void __iomem *addr = chip->legacy.IO_ADDR_R; - - addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); - - return !!(__raw_readb(addr) & 0x20); -} - -#define TS72XX_BOOTROM_PART_SIZE (SZ_16K) -#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) - -static struct mtd_partition ts72xx_nand_parts[] = { - { - .name = "TS-BOOTROM", - .offset = 0, - .size = TS72XX_BOOTROM_PART_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "Linux", - .offset = MTDPART_OFS_RETAIN, - .size = TS72XX_REDBOOT_PART_SIZE, - /* leave so much for last partition */ - }, { - .name = "RedBoot", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static struct platform_nand_data ts72xx_nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .chip_delay = 15, - }, - .ctrl = { - .cmd_ctrl = ts72xx_nand_hwcontrol, - .dev_ready = ts72xx_nand_device_ready, - }, -}; - -static struct resource ts72xx_nand_resource[] = { - { - .start = 0, /* filled in later */ - .end = 0, /* filled in later */ - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts72xx_nand_flash = { - .name = "gen_nand", - .id = -1, - .dev.platform_data = &ts72xx_nand_data, - .resource = ts72xx_nand_resource, - .num_resources = ARRAY_SIZE(ts72xx_nand_resource), -}; - -static void __init ts72xx_register_flash(struct mtd_partition *parts, int n, - resource_size_t start) -{ - /* - * TS7200 has NOR flash all other TS72xx board have NAND flash. - */ - if (board_is_ts7200()) { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } else { - ts72xx_nand_resource[0].start = start; - ts72xx_nand_resource[0].end = start + SZ_16M - 1; - - ts72xx_nand_data.chip.partitions = parts; - ts72xx_nand_data.chip.nr_partitions = n; - - platform_device_register(&ts72xx_nand_flash); - } -} - -/************************************************************************* - * RTC M48T86 - *************************************************************************/ -#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000) -#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000) - -static struct resource ts72xx_rtc_resources[] = { - DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_rtc_device = { - .name = "rtc-m48t86", - .id = -1, - .resource = ts72xx_rtc_resources, - .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), -}; - -/************************************************************************* - * Watchdog (in CPLD) - *************************************************************************/ -#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000) -#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000) - -static struct resource ts72xx_wdt_resources[] = { - DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_wdt_device = { - .name = "ts72xx-wdt", - .id = -1, - .resource = ts72xx_wdt_resources, - .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), -}; - -/************************************************************************* - * ETH - *************************************************************************/ -static struct ep93xx_eth_data __initdata ts72xx_eth_data = { - .phy_id = 1, -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -#define BK3_EN_SDCARD_PHYS_BASE 0x12400000 -#define BK3_EN_SDCARD_PWR 0x0 -#define BK3_DIS_SDCARD_PWR 0x0C -static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd) -{ - void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K); - - if (!pwr_sd) { - pr_err("Failed to enable SD card power!"); - return; - } - - pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__, - !!vdd ? "ON" : "OFF", vdd); - - if (!!vdd) - __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd); - else - __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd); - - iounmap(pwr_sd); -} - -static struct mmc_spi_platform_data bk3_spi_mmc_data = { - .detect_delay = 500, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps = MMC_CAP_NONREMOVABLE, - .setpower = bk3_mmc_spi_setpower, -}; - -/************************************************************************* - * SPI Bus - SD card access - *************************************************************************/ -static struct spi_board_info bk3_spi_board_info[] __initdata = { - { - .modalias = "mmc_spi", - .platform_data = &bk3_spi_mmc_data, - .max_speed_hz = 7.4E6, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -/* - * This is a stub -> the FGPIO[3] pin is not connected on the schematic - * The all work is performed automatically by !SPI_FRAME (SFRM1) and - * goes through CPLD - */ -static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info bk3_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * TS72XX support code - *************************************************************************/ -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - -/* Relative to EP93XX_CS1_PHYS_BASE */ -#define TS73XX_FPGA_LOADER_BASE 0x03c00000 - -static struct resource ts73xx_fpga_resources[] = { - { - .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE, - .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts73xx_fpga_device = { - .name = "ts73xx-fpga-mgr", - .id = -1, - .resource = ts73xx_fpga_resources, - .num_resources = ARRAY_SIZE(ts73xx_fpga_resources), -}; - -#endif - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info ts72xx_spi_devices[] __initdata = { - { - .modalias = "tmp122", - .max_speed_hz = 2 * 1000 * 1000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - /* DIO_17 */ - GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info ts72xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static void __init ts72xx_init_machine(void) -{ - ep93xx_init_devices(); - ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts), - is_ts9420_installed() ? - EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE); - platform_device_register(&ts72xx_rtc_device); - platform_device_register(&ts72xx_wdt_device); - - ep93xx_register_eth(&ts72xx_eth_data, 1); -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - if (board_is_ts7300()) - platform_device_register(&ts73xx_fpga_device); -#endif - gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); - ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, - ARRAY_SIZE(ts72xx_spi_devices)); -} - -MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = ts72xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-spilink-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -/************************************************************************* - * BK3 support code - *************************************************************************/ -static struct mtd_partition bk3_nand_parts[] = { - { - .name = "System", - .offset = 0x00000000, - .size = 0x01e00000, - }, { - .name = "Data", - .offset = 0x01e00000, - .size = 0x05f20000 - }, { - .name = "RedBoot", - .offset = 0x07d20000, - .size = 0x002e0000, - .mask_flags = MTD_WRITEABLE, /* force RO */ - }, -}; - -static void __init bk3_init_machine(void) -{ - ep93xx_init_devices(); - - ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts), - EP93XX_CS6_PHYS_BASE); - - ep93xx_register_eth(&ts72xx_eth_data, 1); - - gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); - ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, - ARRAY_SIZE(bk3_spi_board_info)); - - /* Configure ep93xx's I2S to use AC97 pins */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - platform_device_register(&ep93xx_i2s_device); -} - -MACHINE_START(BK3, "Liebherr controller BK3.1") - /* Maintainer: Lukasz Majewski <lukma@denx.de> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = bk3_init_machine, - .restart = ep93xx_restart, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h deleted file mode 100644 index 00b4941d29c9..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/ts72xx.h - */ - -/* - * TS72xx memory map: - * - * virt phys size - * febff000 22000000 4K model number register (bits 0-2) - * febfe000 22400000 4K options register - * febfd000 22800000 4K options register #2 - * febfc000 23400000 4K CPLD version register - */ - -#ifndef __TS72XX_H_ -#define __TS72XX_H_ - -#define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000) -#define TS72XX_MODEL_SIZE 0x00001000 - -#define TS72XX_MODEL_TS7200 0x00 -#define TS72XX_MODEL_TS7250 0x01 -#define TS72XX_MODEL_TS7260 0x02 -#define TS72XX_MODEL_TS7300 0x03 -#define TS72XX_MODEL_TS7400 0x04 -#define TS72XX_MODEL_MASK 0x07 - - -#define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000) -#define TS72XX_OPTIONS_SIZE 0x00001000 - -#define TS72XX_OPTIONS_COM2_RS485 0x02 -#define TS72XX_OPTIONS_MAX197 0x01 - - -#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000) -#define TS72XX_OPTIONS2_SIZE 0x00001000 - -#define TS72XX_OPTIONS2_TS9420 0x04 -#define TS72XX_OPTIONS2_TS9420_BOOT 0x02 - -#define TS72XX_CPLDVER_PHYS_BASE 0x23400000 -#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000) -#define TS72XX_CPLDVER_SIZE 0x00001000 - -#ifndef __ASSEMBLY__ - -static inline int ts72xx_model(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; -} - -static inline int board_is_ts7200(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7200; -} - -static inline int board_is_ts7250(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7250; -} - -static inline int board_is_ts7260(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7260; -} - -static inline int board_is_ts7300(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7300; -} - -static inline int board_is_ts7400(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7400; -} - -static inline int is_max197_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & - TS72XX_OPTIONS_MAX197); -} - -static inline int is_ts9420_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & - TS72XX_OPTIONS2_TS9420); -} -#endif -#endif /* __TS72XX_H_ */ diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c deleted file mode 100644 index 9471938df64c..000000000000 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ /dev/null @@ -1,321 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/vision_ep9307.c - * Vision Engraving Systems EP9307 SoM support. - * - * Copyright (C) 2008-2011 Vision Engraving Systems - * H Hartley Sweeten <hsweeten@visionengravers.com> - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/fb.h> -#include <linux/io.h> -#include <linux/mtd/partitions.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/spi/mmc_spi.h> -#include <linux/mmc/host.h> - -#include <sound/cs4271.h> - -#include "hardware.h" -#include <linux/platform_data/video-ep93xx.h> -#include <linux/platform_data/spi-ep93xx.h> -#include "gpio-ep93xx.h" - -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/mach/arch.h> - -#include "soc.h" - -/************************************************************************* - * Static I/O mappings for the FPGA - *************************************************************************/ -#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE -#define VISION_VIRT_BASE 0xfebff000 - -static struct map_desc vision_io_desc[] __initdata = { - { - .virtual = VISION_VIRT_BASE, - .pfn = __phys_to_pfn(VISION_PHYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void __init vision_map_io(void) -{ - ep93xx_map_io(); - - iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); -} - -/************************************************************************* - * Ethernet - *************************************************************************/ -static struct ep93xx_eth_data vision_eth_data __initdata = { - .phy_id = 1, -}; - -/************************************************************************* - * Framebuffer - *************************************************************************/ -#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 - -static int vision_lcd_setup(struct platform_device *pdev) -{ - int err; - - err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, - dev_name(&pdev->dev)); - if (err) - return err; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | - EP93XX_SYSCON_DEVCFG_RASONP3 | - EP93XX_SYSCON_DEVCFG_EXVC); - - return 0; -} - -static void vision_lcd_teardown(struct platform_device *pdev) -{ - gpio_free(VISION_LCD_ENABLE); -} - -static void vision_lcd_blank(int blank_mode, struct fb_info *info) -{ - if (blank_mode) - gpio_set_value(VISION_LCD_ENABLE, 0); - else - gpio_set_value(VISION_LCD_ENABLE, 1); -} - -static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { - .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, - .setup = vision_lcd_setup, - .teardown = vision_lcd_teardown, - .blank = vision_lcd_blank, -}; - - -/************************************************************************* - * GPIO Expanders - *************************************************************************/ -#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) -#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) -#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) -#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) - -static struct pca953x_platform_data pca953x_74_gpio_data = { - .gpio_base = PCA9539_74_GPIO_BASE, - .irq_base = EP93XX_BOARD_IRQ(0), -}; - -static struct pca953x_platform_data pca953x_75_gpio_data = { - .gpio_base = PCA9539_75_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_76_gpio_data = { - .gpio_base = PCA9539_76_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_77_gpio_data = { - .gpio_base = PCA9539_77_GPIO_BASE, - .irq_base = -1, -}; - -/************************************************************************* - * I2C Bus - *************************************************************************/ - -static struct i2c_board_info vision_i2c_info[] __initdata = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - .irq = IRQ_EP93XX_EXT1, - }, { - I2C_BOARD_INFO("pca9539", 0x74), - .platform_data = &pca953x_74_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x75), - .platform_data = &pca953x_75_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x76), - .platform_data = &pca953x_76_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x77), - .platform_data = &pca953x_77_gpio_data, - }, -}; - -/************************************************************************* - * SPI CS4271 Audio Codec - *************************************************************************/ -static struct cs4271_platform_data vision_cs4271_data = { - /* Intentionally left blank */ -}; - -/************************************************************************* - * SPI Flash - *************************************************************************/ -static struct mtd_partition vision_spi_flash_partitions[] = { - { - .name = "SPI bootstrap", - .offset = 0, - .size = SZ_4K, - }, { - .name = "Bootstrap config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4K, - }, { - .name = "System config", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data vision_spi_flash_data = { - .name = "SPI Flash", - .parts = vision_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -static struct mmc_spi_platform_data vision_spi_mmc_data = { - .detect_delay = 100, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, -}; - -static struct gpiod_lookup_table vision_spi_mmc_gpio_table = { - .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */ - .table = { - /* Card detect */ - GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW), - /* Write protect */ - GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info vision_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &vision_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, { - .modalias = "sst25l", - .platform_data = &vision_spi_flash_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_3, - }, { - .modalias = "mmc_spi", - .platform_data = &vision_spi_mmc_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 2, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = { - .dev_id = "spi0.0", /* cs4271 @ CS0 */ - .table = { - /* RESET */ - GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info vision_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * I2S Audio - *************************************************************************/ -static struct platform_device vision_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static void __init vision_register_i2s(void) -{ - ep93xx_register_i2s(); - platform_device_register(&vision_audio_device); -} - -/************************************************************************* - * Machine Initialization - *************************************************************************/ -static void __init vision_init_machine(void) -{ - ep93xx_init_devices(); - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); - ep93xx_register_eth(&vision_eth_data, 1); - ep93xx_register_fb(&ep93xxfb_info); - ep93xx_register_pwm(1, 0); - - /* - * Request the gpio expander's interrupt gpio line now to prevent - * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). - */ - if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, - "pca9539:74")) - pr_warn("cannot request interrupt gpio for pca9539:74\n"); - - vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); - - ep93xx_register_i2c(vision_i2c_info, - ARRAY_SIZE(vision_i2c_info)); - gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table); - gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); - gpiod_add_lookup_table(&vision_spi_cs_gpio_table); - ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, - ARRAY_SIZE(vision_spi_board_info)); - vision_register_i2s(); -} - -MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS, - .map_io = vision_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = vision_init_machine, - .restart = ep93xx_restart, -MACHINE_END diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index f8920d0010de..6521ab3d24fa 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -135,7 +135,7 @@ static struct timer_list perr_timer; static void dc21285_enable_error(struct timer_list *timer) { - del_timer(timer); + timer_delete(timer); if (timer == &serr_timer) enable_irq(IRQ_PCI_SERR); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ab767f059929..dc47b2312127 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -49,7 +49,6 @@ config SOC_IMX31 config SOC_IMX35 bool "i.MX35 support" select MXC_AVIC - select PINCTRL_IMX35 help This enables support for Freescale i.MX35 processor @@ -61,7 +60,6 @@ config SOC_IMX1 bool "i.MX1 support" select CPU_ARM920T select MXC_AVIC - select PINCTRL_IMX1 help This enables support for Freescale i.MX1 processor @@ -73,7 +71,6 @@ config SOC_IMX25 bool "i.MX25 support" select CPU_ARM926T select MXC_AVIC - select PINCTRL_IMX25 help This enables support for Freescale i.MX25 processor @@ -81,7 +78,6 @@ config SOC_IMX27 bool "i.MX27 support" select CPU_ARM926T select MXC_AVIC - select PINCTRL_IMX27 help This enables support for Freescale i.MX27 processor @@ -98,7 +94,6 @@ config SOC_IMX5 config SOC_IMX50 bool "i.MX50 support" - select PINCTRL_IMX50 select SOC_IMX5 help @@ -106,14 +101,12 @@ config SOC_IMX50 config SOC_IMX51 bool "i.MX51 support" - select PINCTRL_IMX51 select SOC_IMX5 help This enables support for Freescale i.MX51 processor config SOC_IMX53 bool "i.MX53 support" - select PINCTRL_IMX53 select SOC_IMX5 help @@ -137,7 +130,6 @@ config SOC_IMX6Q select ARM_ERRATA_775420 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD - select PINCTRL_IMX6Q select SOC_IMX6 help @@ -147,7 +139,6 @@ config SOC_IMX6SL bool "i.MX6 SoloLite support" select ARM_ERRATA_754322 select ARM_ERRATA_775420 - select PINCTRL_IMX6SL select SOC_IMX6 help @@ -157,7 +148,6 @@ config SOC_IMX6SLL bool "i.MX6 SoloLiteLite support" select ARM_ERRATA_754322 select ARM_ERRATA_775420 - select PINCTRL_IMX6SLL select SOC_IMX6 help @@ -167,7 +157,6 @@ config SOC_IMX6SX bool "i.MX6 SoloX support" select ARM_ERRATA_754322 select ARM_ERRATA_775420 - select PINCTRL_IMX6SX select SOC_IMX6 help @@ -175,7 +164,6 @@ config SOC_IMX6SX config SOC_IMX6UL bool "i.MX6 UltraLite support" - select PINCTRL_IMX6UL select SOC_IMX6 select ARM_ERRATA_814220 @@ -211,7 +199,6 @@ config SOC_IMX7D_CM4 config SOC_IMX7D bool "i.MX7 Dual support" - select PINCTRL_IMX7D select SOC_IMX7D_CA7 if ARCH_MULTI_V7 select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M select ARM_ERRATA_814220 if ARCH_MULTI_V7 @@ -221,7 +208,6 @@ config SOC_IMX7D config SOC_IMX7ULP bool "i.MX7ULP support" select CLKSRC_IMX_TPM - select PINCTRL_IMX7ULP select SOC_IMX7D_CA7 if ARCH_MULTI_V7 select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M help @@ -237,7 +223,6 @@ config SOC_IMXRT config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC if ARCH_MULTI_V7 - select PINCTRL_VF610 help This enables support for Freescale Vybrid VF610 processor. diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 13f3068e9845..45c1a2a7b35f 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -98,7 +98,7 @@ extern const u32 imx53_suspend_sz; void imx6_suspend(void __iomem *ocram_vbase); #else static inline void imx53_suspend(void __iomem *ocram_vbase) {} -static const u32 imx53_suspend_sz; +static __maybe_unused const u32 imx53_suspend_sz; static inline void imx6_suspend(void __iomem *ocram_vbase) {} #endif diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 9ababf4ac210..3feb31ab556e 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -7,37 +7,15 @@ #include <linux/of_platform.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> -#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <asm/mach/arch.h> #include "common.h" #include "cpuidle.h" -static void __init imx6sx_enet_clk_sel(void) -{ - struct regmap *gpr; - - gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr"); - if (!IS_ERR(gpr)) { - regmap_update_bits(gpr, IOMUXC_GPR1, - IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0); - regmap_update_bits(gpr, IOMUXC_GPR1, - IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0); - } else { - pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n"); - } -} - -static inline void imx6sx_enet_init(void) -{ - imx6sx_enet_clk_sel(); -} - static void __init imx6sx_init_machine(void) { of_platform_default_populate(NULL, NULL, NULL); - imx6sx_enet_init(); imx_anatop_init(); imx6sx_pm_init(); } diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index 9587885fb1ac..87632ae0201c 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -48,7 +48,7 @@ static void __init imx7d_enet_clk_sel(void) } } -static inline void imx7d_enet_init(void) +static void __init imx7d_enet_init(void) { imx7d_enet_phy_init(); imx7d_enet_clk_sel(); diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 25893d109190..94e4f4a2f73f 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -437,6 +437,7 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc, { *pmu_mmdc = (struct mmdc_pmu) { .pmu = (struct pmu) { + .parent = dev, .task_ctx_nr = perf_invalid_context, .attr_groups = attr_groups, .event_init = mmdc_pmu_event_init, @@ -508,9 +509,8 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk; pmu_mmdc->devtype_data = device_get_match_data(&pdev->dev); - hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC, - HRTIMER_MODE_REL); - pmu_mmdc->hrtimer.function = mmdc_pmu_timer_handler; + hrtimer_setup(&pmu_mmdc->hrtimer, mmdc_pmu_timer_handler, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); cpumask_set_cpu(raw_smp_processor_id(), &pmu_mmdc->cpu); @@ -595,7 +595,7 @@ static struct platform_driver imx_mmdc_driver = { .of_match_table = imx_mmdc_dt_ids, }, .probe = imx_mmdc_probe, - .remove_new = imx_mmdc_remove, + .remove = imx_mmdc_remove, }; static int __init imx_mmdc_init(void) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index b36f05b54cc7..a671ca498f88 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -634,13 +634,11 @@ static void imx6_pm_stby_poweroff(void) static int imx6_pm_stby_poweroff_probe(void) { - if (pm_power_off) { - pr_warn("%s: pm_power_off already claimed %p %ps!\n", - __func__, pm_power_off, pm_power_off); + if (register_platform_power_off(imx6_pm_stby_poweroff)) { + pr_warn("%s: platform power off already claimed!\n", __func__); return -EBUSY; } - pm_power_off = imx6_pm_stby_poweroff; return 0; } diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig index 35730d3696d0..138599545c24 100644 --- a/arch/arm/mach-lpc32xx/Kconfig +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -8,5 +8,6 @@ config ARCH_LPC32XX select CLKSRC_LPC32XX select CPU_ARM926T select GPIOLIB + select LPC32XX_DMAMUX if AMBA_PL08X help Support for the NXP LPC32XX family of processors diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index fd5d0c8ff695..04ad651d13a0 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -86,6 +86,9 @@ static int __init mvebu_scan_mem(unsigned long node, const char *uname, base = dt_mem_next_cell(dt_root_addr_cells, ®); size = dt_mem_next_cell(dt_root_size_cells, ®); + if (size < MVEBU_DDR_TRAINING_AREA_SZ) + pr_warn("Too little memory to reserve for DDR training\n"); + memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ); } diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index a643b71e30a3..08ec6bd84ada 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -8,6 +8,7 @@ menuconfig ARCH_OMAP1 select ARCH_OMAP select CLKSRC_MMIO select FORCE_PCI if PCCARD + select GENERIC_IRQ_CHIP select GPIOLIB help Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 3312ef93355d..a5bf5554800f 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -289,7 +289,7 @@ static struct gpiod_lookup_table nokia770_irq_gpio_table = { GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq", GPIO_ACTIVE_HIGH), /* GPIO used for retu IRQ */ - GPIO_LOOKUP("gpio-48-63", 15, "retu_irq", + GPIO_LOOKUP("gpio-48-63", 14, "retu_irq", GPIO_ACTIVE_HIGH), /* GPIO used for tahvo IRQ */ GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq", diff --git a/arch/arm/mach-omap1/omap-dma.c b/arch/arm/mach-omap1/omap-dma.c index 9ee472f8ead1..aebe5e55ff60 100644 --- a/arch/arm/mach-omap1/omap-dma.c +++ b/arch/arm/mach-omap1/omap-dma.c @@ -59,19 +59,6 @@ static struct omap_dma_dev_attr *d; static int enable_1510_mode; static u32 errata; -struct dma_link_info { - int *linked_dmach_q; - int no_of_lchs_linked; - - int q_count; - int q_tail; - int q_head; - - int chain_state; - int chain_mode; - -}; - static int dma_lch_count; static int dma_chan_count; static int omap_dma_reserve_channels; @@ -845,7 +832,7 @@ static void omap_system_dma_remove(struct platform_device *pdev) static struct platform_driver omap_system_dma_driver = { .probe = omap_system_dma_probe, - .remove_new = omap_system_dma_remove, + .remove = omap_system_dma_remove, .driver = { .name = "omap_dma_system" }, diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index d4373a5c4697..b2763fb097ea 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -114,13 +114,9 @@ extern void omap1_pm_suspend(void); extern void omap1510_cpu_suspend(unsigned long, unsigned long); extern void omap1610_cpu_suspend(unsigned long, unsigned long); -extern void omap1510_idle_loop_suspend(void); -extern void omap1610_idle_loop_suspend(void); extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap1510_idle_loop_suspend_sz; -extern unsigned int omap1610_idle_loop_suspend_sz; #ifdef CONFIG_OMAP_SERIAL_WAKE extern void omap_serial_wake_trigger(int enable); diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 7ad74db951f6..f18ef45e2fe1 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -333,7 +333,7 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) omap_pm_ops.scu_prepare(cpu, power_state); /* - * CPU never retuns back if targeted power state is OFF mode. + * CPU never returns back if targeted power state is OFF mode. * CPU ONLINE follows normal CPU ONLINE ptah via * omap4_secondary_startup(). */ diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index fca7869c8075..800980057373 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -315,7 +315,7 @@ static struct omap_device *omap_device_alloc(struct platform_device *pdev, od->hwmods_cnt = oh_cnt; - hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); + hwmods = kmemdup_array(ohs, oh_cnt, sizeof(*hwmods), GFP_KERNEL); if (!hwmods) goto oda_exit2; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 2441d96b7144..a4785302b7ae 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -523,7 +523,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm) * Set the powerdomain @pwrdm's next power state to @pwrst. The powerdomain * may not enter this state immediately if the preconditions for this state * have not been satisfied. Returns -EINVAL if the powerdomain pointer is - * null or if the power state is invalid for the powerdomin, or returns 0 + * null or if the power state is invalid for the powerdomain, or returns 0 * upon success. */ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c index 0297e302d7bc..09bf366d05ff 100644 --- a/arch/arm/mach-orion5x/board-d2net.c +++ b/arch/arm/mach-orion5x/board-d2net.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/leds.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -55,12 +56,9 @@ static struct gpio_led d2net_leds[] = { { .name = "d2net:blue:sata", .default_trigger = "default-on", - .gpio = D2NET_GPIO_BLUE_LED_OFF, - .active_low = 1, }, { .name = "d2net:red:fail", - .gpio = D2NET_GPIO_RED_LED, }, }; @@ -77,6 +75,17 @@ static struct platform_device d2net_gpio_leds = { }, }; +static struct gpiod_lookup_table d2net_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_BLUE_LED_OFF, NULL, + 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_RED_LED, NULL, + 1, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init d2net_gpio_leds_init(void) { int err; @@ -91,6 +100,7 @@ static void __init d2net_gpio_leds_init(void) if (err) pr_err("d2net: failed to configure blue LED blink GPIO\n"); + gpiod_add_lookup_table(&d2net_leds_gpio_table); platform_device_register(&d2net_gpio_leds); } diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c index b0f16d223adf..9e3d69891d2f 100644 --- a/arch/arm/mach-orion5x/board-mss2.c +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -82,5 +82,5 @@ static void mss2_power_off(void) void __init mss2_init(void) { /* register mss2 specific power-off method */ - pm_power_off = mss2_power_off; + register_platform_power_off(mss2_power_off); } diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index d69259b6b60d..fcd38ff7ca45 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -14,6 +14,7 @@ * */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> @@ -254,37 +255,64 @@ error_fail: static struct gpio_led dns323ab_leds[] = { { .name = "power:blue", - .gpio = DNS323_GPIO_LED_POWER2, .default_trigger = "default-on", }, { .name = "right:amber", - .gpio = DNS323_GPIO_LED_RIGHT_AMBER, - .active_low = 1, }, { .name = "left:amber", - .gpio = DNS323_GPIO_LED_LEFT_AMBER, - .active_low = 1, }, }; +static struct gpiod_lookup_table dns323a1_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL, + 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL, + 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL, + 2, GPIO_ACTIVE_LOW), + { }, + }, +}; + +/* B1 is the same but power LED is active high */ +static struct gpiod_lookup_table dns323b1_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL, + 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL, + 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL, + 2, GPIO_ACTIVE_LOW), + { }, + }, +}; static struct gpio_led dns323c_leds[] = { { .name = "power:blue", - .gpio = DNS323C_GPIO_LED_POWER, .default_trigger = "timer", - .active_low = 1, }, { .name = "right:amber", - .gpio = DNS323C_GPIO_LED_RIGHT_AMBER, - .active_low = 1, }, { .name = "left:amber", - .gpio = DNS323C_GPIO_LED_LEFT_AMBER, - .active_low = 1, }, }; +static struct gpiod_lookup_table dns323c_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_POWER, NULL, + 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_RIGHT_AMBER, NULL, + 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_LEFT_AMBER, NULL, + 2, GPIO_ACTIVE_LOW), + { }, + }, +}; static struct gpio_led_platform_data dns323ab_led_data = { .num_leds = ARRAY_SIZE(dns323ab_leds), @@ -621,16 +649,21 @@ static void __init dns323_init(void) /* The 5181 power LED is active low and requires * DNS323_GPIO_LED_POWER1 to also be low. */ - dns323ab_leds[0].active_low = 1; - gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); - gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); - fallthrough; + gpiod_add_lookup_table(&dns323a1_leds_gpio_table); + gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); + gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); + i2c_register_board_info(0, dns323ab_i2c_devices, + ARRAY_SIZE(dns323ab_i2c_devices)); + + break; case DNS323_REV_B1: + gpiod_add_lookup_table(&dns323b1_leds_gpio_table); i2c_register_board_info(0, dns323ab_i2c_devices, ARRAY_SIZE(dns323ab_i2c_devices)); break; case DNS323_REV_C1: /* Hookup LEDs & Buttons */ + gpiod_add_lookup_table(&dns323c_leds_gpio_table); dns323_gpio_leds.dev.platform_data = &dns323c_led_data; dns323_button_device.dev.platform_data = &dns323c_button_data; @@ -667,7 +700,7 @@ static void __init dns323_init(void) if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) pr_err("DNS-323: failed to setup power-off GPIO\n"); - pm_power_off = dns323a_power_off; + register_platform_power_off(dns323a_power_off); break; case DNS323_REV_B1: /* 5182 built-in SATA init */ @@ -684,7 +717,7 @@ static void __init dns323_init(void) if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) pr_err("DNS-323: failed to setup power-off GPIO\n"); - pm_power_off = dns323b_power_off; + register_platform_power_off(dns323b_power_off); break; case DNS323_REV_C1: /* 5182 built-in SATA init */ @@ -694,7 +727,7 @@ static void __init dns323_init(void) if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0) pr_err("DNS-323: failed to setup power-off GPIO\n"); - pm_power_off = dns323c_power_off; + register_platform_power_off(dns323c_power_off); /* Now, -this- should theoretically be done by the sata_mv driver * once I figure out what's going on there. Maybe the behaviour diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index acba06618080..339b10891808 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -373,7 +373,7 @@ static void __init kurobox_pro_init(void) i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); /* register Kurobox Pro specific power-off method */ - pm_power_off = kurobox_pro_power_off; + register_platform_power_off(kurobox_pro_power_off); } #ifdef CONFIG_MACH_KUROBOX_PRO diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 2bf8ec75e908..5b0249f109cd 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -8,6 +8,7 @@ * License, or (at your option) any later version. */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -139,34 +140,45 @@ static struct i2c_board_info __initdata mv2120_i2c_rtc = { static struct gpio_led mv2120_led_pins[] = { { .name = "mv2120:blue:health", - .gpio = 0, }, { .name = "mv2120:red:health", - .gpio = 1, }, { .name = "mv2120:led:bright", - .gpio = 4, .default_trigger = "default-on", }, { .name = "mv2120:led:dimmed", - .gpio = 5, }, { .name = "mv2120:red:sata0", - .gpio = 8, - .active_low = 1, }, { .name = "mv2120:red:sata1", - .gpio = 9, - .active_low = 1, }, }; +static struct gpiod_lookup_table mv2120_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("orion_gpio0", 0, NULL, + 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", 1, NULL, + 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL, + 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL, + 3, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", 8, NULL, + 4, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", 9, NULL, + 5, GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct gpio_led_platform_data mv2120_led_data = { .leds = mv2120_led_pins, .num_leds = ARRAY_SIZE(mv2120_led_pins), @@ -219,13 +231,14 @@ static void __init mv2120_init(void) gpio_free(MV2120_GPIO_RTC_IRQ); } i2c_register_board_info(0, &mv2120_i2c_rtc, 1); + gpiod_add_lookup_table(&mv2120_leds_gpio_table); platform_device_register(&mv2120_leds); /* register mv2120 specific power-off method */ if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0) pr_err("mv2120: failed to setup power-off GPIO\n"); - pm_power_off = mv2120_power_off; + register_platform_power_off(mv2120_power_off); } /* Warning: HP uses a wrong mach-type (=526) in their bootloader */ diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 695cc683cd83..4afd9b4c71a9 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -18,6 +18,7 @@ #include <linux/i2c.h> #include <linux/ata_platform.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -214,19 +215,30 @@ err_free_1: static struct gpio_led net2big_leds[] = { { .name = "net2big:red:power", - .gpio = NET2BIG_GPIO_PWR_RED_LED, }, { .name = "net2big:blue:power", - .gpio = NET2BIG_GPIO_PWR_BLUE_LED, }, { .name = "net2big:red:sata0", - .gpio = NET2BIG_GPIO_SATA0_RED_LED, }, { .name = "net2big:red:sata1", - .gpio = NET2BIG_GPIO_SATA1_RED_LED, + }, +}; + +static struct gpiod_lookup_table net2big_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_RED_LED, NULL, + 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_BLUE_LED, NULL, + 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA0_RED_LED, NULL, + 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA1_RED_LED, NULL, + 3, GPIO_ACTIVE_HIGH), + { }, }, }; @@ -282,6 +294,7 @@ static void __init net2big_gpio_leds_init(void) if (err) pr_err("net2big: failed to setup SATA1 blue LED GPIO\n"); + gpiod_add_lookup_table(&net2big_leds_gpio_table); platform_device_register(&net2big_gpio_leds); } @@ -410,7 +423,7 @@ static void __init net2big_init(void) if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 && gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0) - pm_power_off = net2big_power_off; + register_platform_power_off(net2big_power_off); else pr_err("net2big: failed to configure power-off GPIO\n"); diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 23a5521c6833..a9f01859d101 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -349,7 +349,7 @@ static void __init tsp2_init(void) i2c_register_board_info(0, &tsp2_i2c_rtc, 1); /* register Terastation Pro II specific power-off method */ - pm_power_off = tsp2_power_off; + register_platform_power_off(tsp2_power_off); } MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index bab8ba0e01ab..de9092e992c5 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void) i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); /* register tsx09 specific power-off method */ - pm_power_off = qnap_tsx09_power_off; + register_platform_power_off(qnap_tsx09_power_off); } MACHINE_START(TS209, "QNAP TS-109/TS-209") diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 6f60dc1dfa22..725688aa5cba 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -8,6 +8,7 @@ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -168,20 +169,27 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = { static struct gpio_led ts409_led_pins[] = { { .name = "ts409:red:sata1", - .gpio = 4, - .active_low = 1, }, { .name = "ts409:red:sata2", - .gpio = 5, - .active_low = 1, }, { .name = "ts409:red:sata3", - .gpio = 6, - .active_low = 1, }, { .name = "ts409:red:sata4", - .gpio = 7, - .active_low = 1, + }, +}; + +static struct gpiod_lookup_table ts409_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL, + 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL, + 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", 6, NULL, + 2, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("orion_gpio0", 7, NULL, + 3, GPIO_ACTIVE_LOW), + { }, }, }; @@ -300,10 +308,11 @@ static void __init qnap_ts409_init(void) if (qnap_ts409_i2c_rtc.irq == 0) pr_warn("qnap_ts409_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1); + gpiod_add_lookup_table(&ts409_leds_gpio_table); platform_device_register(&ts409_leds); /* register tsx09 specific power-off method */ - pm_power_off = qnap_tsx09_power_off; + register_platform_power_off(qnap_tsx09_power_off); } MACHINE_START(TS409, "QNAP TS-409") diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 661b3fc43275..7695cfce01a1 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -7,7 +7,7 @@ #include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> -#include <linux/spi/pxa2xx_spi.h> +#include <linux/gpio-pxa.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/soc/pxa/cpu.h> @@ -18,6 +18,7 @@ #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmp_dma.h> +#include "mfp-pxa2xx.h" #include "regs-ost.h" #include "reset.h" #include "devices.h" @@ -47,7 +48,7 @@ struct platform_device pxa_device_pmu = { .num_resources = 1, }; -static struct resource pxamci_resources[] = { +static const struct resource pxamci_resources[] = { [0] = { .start = 0x41100000, .end = 0x41100fff, @@ -60,22 +61,26 @@ static struct resource pxamci_resources[] = { }, }; -static u64 pxamci_dmamask = 0xffffffffUL; - -struct platform_device pxa_device_mci = { - .name = "pxa2xx-mci", - .id = 0, - .dev = { - .dma_mask = &pxamci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxamci_resources), - .resource = pxamci_resources, -}; - -void __init pxa_set_mci_info(struct pxamci_platform_data *info) +void __init pxa_set_mci_info(const struct pxamci_platform_data *info, + const struct property_entry *props) { - pxa_register_device(&pxa_device_mci, info); + const struct platform_device_info mci_info = { + .name = "pxa2xx-mci", + .id = 0, + .res = pxamci_resources, + .num_res = ARRAY_SIZE(pxamci_resources), + .data = info, + .size_data = sizeof(*info), + .dma_mask = 0xffffffffUL, + .properties = props, + }; + struct platform_device *mci_dev; + int err; + + mci_dev = platform_device_register_full(&mci_info); + err = PTR_ERR_OR_ZERO(mci_dev); + if (err) + pr_err("Unable to create mci device: %d\n", err); } static struct pxa2xx_udc_mach_info pxa_udc_info = { @@ -628,6 +633,11 @@ struct platform_device pxa27x_device_pwm1 = { }; #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +const struct software_node pxa2xx_gpiochip_node = { + .name = "gpio-pxa", +}; + struct resource pxa_resource_gpio[] = { { .start = 0x40e00000, @@ -651,11 +661,19 @@ struct resource pxa_resource_gpio[] = { }, }; +static struct pxa_gpio_platform_data pxa2xx_gpio_info = { + .irq_base = PXA_GPIO_TO_IRQ(0), + .gpio_set_wake = gpio_set_wake, +}; + struct platform_device pxa25x_device_gpio = { .name = "pxa25x-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa_resource_gpio), .resource = pxa_resource_gpio, + .dev = { + .platform_data = &pxa2xx_gpio_info, + }, }; struct platform_device pxa27x_device_gpio = { @@ -663,24 +681,11 @@ struct platform_device pxa27x_device_gpio = { .id = -1, .num_resources = ARRAY_SIZE(pxa_resource_gpio), .resource = pxa_resource_gpio, + .dev = { + .platform_data = &pxa2xx_gpio_info, + }, }; - -/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. - * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */ -void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info) -{ - struct platform_device *pd; - - pd = platform_device_alloc("pxa2xx-spi", id); - if (pd == NULL) { - printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n", - id); - return; - } - - pd->dev.platform_data = info; - platform_device_add(pd); -} +#endif /* CONFIG_PXA25x || CONFIG_PXA27x */ static struct resource pxa_dma_resource[] = { [0] = { diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 82c83939017a..72c556ff67db 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -4,7 +4,6 @@ struct mmp_dma_platdata; extern struct platform_device pxa_device_pmu; -extern struct platform_device pxa_device_mci; extern struct platform_device pxa3xx_device_mci2; extern struct platform_device pxa3xx_device_mci3; extern struct platform_device pxa25x_device_udc; @@ -53,8 +52,8 @@ extern struct platform_device pxa_device_asoc_ssp4; extern struct platform_device pxa25x_device_gpio; extern struct platform_device pxa27x_device_gpio; -extern struct platform_device pxa3xx_device_gpio; -extern struct platform_device pxa93x_device_gpio; + +extern const struct software_node pxa2xx_gpiochip_node; void __init pxa_register_device(struct platform_device *dev, void *data); void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index c9f0f62187bd..1713bdf3b71e 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -21,6 +21,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/gpio/machine.h> +#include <linux/gpio/property.h> #include <linux/gpio.h> #include <linux/err.h> #include <linux/clk.h> @@ -40,6 +41,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" #include "gumstix.h" +#include "devices.h" #include "generic.h" @@ -90,7 +92,7 @@ static struct pxamci_platform_data gumstix_mci_platform_data = { static void __init gumstix_mmc_init(void) { - pxa_set_mci_info(&gumstix_mci_platform_data); + pxa_set_mci_info(&gumstix_mci_platform_data, NULL); } #else static void __init gumstix_mmc_init(void) @@ -99,27 +101,24 @@ static void __init gumstix_mmc_init(void) } #endif -#ifdef CONFIG_USB_PXA25X -static struct gpiod_lookup_table gumstix_gpio_vbus_gpiod_table = { - .dev_id = "gpio-vbus", - .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOn, - "vbus", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOx, - "pullup", GPIO_ACTIVE_HIGH), - { }, - }, +#if IS_ENABLED(CONFIG_USB_PXA25X) +static const struct property_entry gumstix_vbus_props[] __initconst = { + PROPERTY_ENTRY_GPIO("vbus-gpios", &pxa2xx_gpiochip_node, + GPIO_GUMSTIX_USB_GPIOn, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("pullup-gpios", &pxa2xx_gpiochip_node, + GPIO_GUMSTIX_USB_GPIOx, GPIO_ACTIVE_HIGH), + { } }; -static struct platform_device gumstix_gpio_vbus = { - .name = "gpio-vbus", - .id = -1, +static const struct platform_device_info gumstix_gpio_vbus_info __initconst = { + .name = "gpio-vbus", + .id = PLATFORM_DEVID_NONE, + .properties = gumstix_vbus_props, }; static void __init gumstix_udc_init(void) { - gpiod_add_lookup_table(&gumstix_gpio_vbus_gpiod_table); - platform_device_register(&gumstix_gpio_vbus); + platform_device_register_full(&gumstix_gpio_vbus_info); } #else static void gumstix_udc_init(void) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index a9ef71008147..d9cadd97748a 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -152,7 +152,7 @@ pxa_init_irq_common(struct device_node *node, int irq_nr, &pxa_irq_ops, NULL); if (!pxa_irq_domain) panic("Unable to add PXA IRQ domain\n"); - irq_set_default_host(pxa_irq_domain); + irq_set_default_domain(pxa_irq_domain); for (n = 0; n < irq_nr; n += 32) { void __iomem *base = irq_base(n >> 5); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 02712d24be82..03e34841fc00 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -178,12 +178,8 @@ void __init pxa25x_map_io(void) pxa25x_get_clk_frequency_khz(1); } -static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { - .irq_base = PXA_GPIO_TO_IRQ(0), - .gpio_set_wake = gpio_set_wake, -}; - static struct platform_device *pxa25x_devices[] __initdata = { + &pxa25x_device_gpio, &pxa25x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -243,8 +239,8 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); if (!of_have_populated_dt()) { + software_node_register(&pxa2xx_gpiochip_node); pxa2xx_set_dmac_info(&pxa25x_dma_pdata); - pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index d71491e2e1d6..f8382477d629 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -276,12 +276,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa27x_device_i2c_power, info); } -static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { - .irq_base = PXA_GPIO_TO_IRQ(0), - .gpio_set_wake = gpio_set_wake, -}; - static struct platform_device *devices[] __initdata = { + &pxa27x_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -345,8 +341,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); if (!of_have_populated_dt()) { - pxa_register_device(&pxa27x_device_gpio, - &pxa27x_gpio_info); + software_node_register(&pxa2xx_gpiochip_node); pxa2xx_set_dmac_info(&pxa27x_dma_pdata); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 72fa2e3fd353..71b282b146d0 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -31,10 +31,10 @@ /* * Constants */ -#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ -#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ -#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ -#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (secs_to_jiffies(60)) +#define SHARPSL_CHARGE_FINISH_TIME (secs_to_jiffies(10*60)) +#define SHARPSL_BATCHK_TIME (secs_to_jiffies(15)) +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ #define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ @@ -913,13 +913,13 @@ static void sharpsl_pm_remove(struct platform_device *pdev) if (sharpsl_pm.machinfo->exit) sharpsl_pm.machinfo->exit(); - del_timer_sync(&sharpsl_pm.chrg_full_timer); - del_timer_sync(&sharpsl_pm.ac_timer); + timer_delete_sync(&sharpsl_pm.chrg_full_timer); + timer_delete_sync(&sharpsl_pm.ac_timer); } static struct platform_driver sharpsl_pm_driver = { .probe = sharpsl_pm_probe, - .remove_new = sharpsl_pm_remove, + .remove = sharpsl_pm_remove, .suspend = sharpsl_pm_suspend, .resume = sharpsl_pm_resume, .driver = { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cc691b199429..33533e35720f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -14,20 +14,22 @@ #include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> +#include <linux/gpio/property.h> #include <linux/leds.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> +#include <linux/property.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/corgi_lcd.h> -#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> #include <linux/mtd/physmap.h> #include <linux/input-event-codes.h> #include <linux/input/matrix_keypad.h> #include <linux/regulator/machine.h> #include <linux/io.h> +#include <linux/property.h> #include <linux/reboot.h> #include <linux/memblock.h> @@ -128,6 +130,19 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */ }; +static const struct software_node spitz_scoop_1_gpiochip_node = { + .name = "sharp-scoop.0", +}; + +/* Only on Spitz */ +static const struct software_node spitz_scoop_2_gpiochip_node = { + .name = "sharp-scoop.1", +}; + +/* Only on Akita */ +static const struct software_node akita_max7310_gpiochip_node = { + .name = "i2c-max7310", +}; /****************************************************************************** * Scoop GPIO expander @@ -363,38 +378,56 @@ static const uint32_t spitz_keymap[] = { KEY(6, 8, KEY_RIGHT), }; -static const struct matrix_keymap_data spitz_keymap_data = { - .keymap = spitz_keymap, - .keymap_size = ARRAY_SIZE(spitz_keymap), +static const struct software_node_ref_args spitz_mkp_row_gpios[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 12, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 17, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 91, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 34, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 36, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 38, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 39, GPIO_ACTIVE_HIGH), }; -static const uint32_t spitz_row_gpios[] = - { 12, 17, 91, 34, 36, 38, 39 }; -static const uint32_t spitz_col_gpios[] = - { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 }; - -static struct matrix_keypad_platform_data spitz_mkp_pdata = { - .keymap_data = &spitz_keymap_data, - .row_gpios = spitz_row_gpios, - .col_gpios = spitz_col_gpios, - .num_row_gpios = ARRAY_SIZE(spitz_row_gpios), - .num_col_gpios = ARRAY_SIZE(spitz_col_gpios), - .col_scan_delay_us = 10, - .debounce_ms = 10, - .wakeup = 1, +static const struct software_node_ref_args spitz_mkp_col_gpios[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 88, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 23, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 24, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 25, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 26, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 27, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 52, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 103, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 107, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 108, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 114, GPIO_ACTIVE_HIGH), }; -static struct platform_device spitz_mkp_device = { +static const struct property_entry spitz_mkp_properties[] = { + PROPERTY_ENTRY_U32_ARRAY("linux,keymap", spitz_keymap), + PROPERTY_ENTRY_REF_ARRAY("row-gpios", spitz_mkp_row_gpios), + PROPERTY_ENTRY_REF_ARRAY("col-gpios", spitz_mkp_col_gpios), + PROPERTY_ENTRY_U32("col-scan-delay-us", 10), + PROPERTY_ENTRY_U32("debounce-delay-ms", 10), + PROPERTY_ENTRY_BOOL("wakeup-source"), + { } +}; + +static const struct platform_device_info spitz_mkp_info __initconst = { .name = "matrix-keypad", - .id = -1, - .dev = { - .platform_data = &spitz_mkp_pdata, - }, + .id = PLATFORM_DEVID_NONE, + .properties = spitz_mkp_properties, }; + static void __init spitz_mkp_init(void) { - platform_device_register(&spitz_mkp_device); + struct platform_device *pd; + int err; + + pd = platform_device_register_full(&spitz_mkp_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("failed to create keypad device: %d\n", err); } #else static inline void spitz_mkp_init(void) {} @@ -404,45 +437,82 @@ static inline void spitz_mkp_init(void) {} * GPIO keys ******************************************************************************/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button spitz_gpio_keys[] = { - { - .type = EV_PWR, - .code = KEY_SUSPEND, - .gpio = SPITZ_GPIO_ON_KEY, - .desc = "On Off", - .wakeup = 1, - }, - /* Two buttons detecting the lid state */ - { - .type = EV_SW, - .code = 0, - .gpio = SPITZ_GPIO_SWA, - .desc = "Display Down", - }, - { - .type = EV_SW, - .code = 1, - .gpio = SPITZ_GPIO_SWB, - .desc = "Lid Closed", - }, +static const struct software_node spitz_gpio_keys_node = { + .name = "spitz-gpio-keys", }; -static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = { - .buttons = spitz_gpio_keys, - .nbuttons = ARRAY_SIZE(spitz_gpio_keys), +static const struct property_entry spitz_suspend_key_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_PWR), + PROPERTY_ENTRY_U32("linux,code", KEY_SUSPEND), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_ON_KEY, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "On Off"), + PROPERTY_ENTRY_BOOL("wakeup-source"), + { } }; -static struct platform_device spitz_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &spitz_gpio_keys_platform_data, - }, +static const struct software_node spitz_suspend_key_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_suspend_key_props, +}; + +static const struct property_entry spitz_sw1_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_SW), + PROPERTY_ENTRY_U32("linux,code", 0), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_SWA, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "Display Down"), + { } +}; + +static const struct software_node spitz_sw1_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_sw1_props, +}; + +static const struct property_entry spitz_sw2_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_SW), + PROPERTY_ENTRY_U32("linux,code", 1), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_SWB, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "Lid Closed"), + { } +}; + +static const struct software_node spitz_sw2_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_sw2_props, +}; + +static const struct software_node *spitz_gpio_keys_swnodes[] = { + &spitz_gpio_keys_node, + &spitz_suspend_key_node, + &spitz_sw1_node, + &spitz_sw2_node, + NULL }; static void __init spitz_keys_init(void) { - platform_device_register(&spitz_gpio_keys_device); + struct platform_device_info keys_info = { + .name = "gpio-keys", + .id = PLATFORM_DEVID_NONE, + }; + struct platform_device *pd; + int err; + + err = software_node_register_node_group(spitz_gpio_keys_swnodes); + if (err) { + pr_err("failed to register gpio-keys software nodes: %d\n", err); + return; + } + + keys_info.fwnode = software_node_fwnode(&spitz_gpio_keys_node); + + pd = platform_device_register_full(&keys_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("failed to create gpio-keys device: %d\n", err); } #else static inline void spitz_keys_init(void) {} @@ -452,35 +522,64 @@ static inline void spitz_keys_init(void) {} * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -static struct gpio_led spitz_gpio_leds[] = { - { - .name = "spitz:amber:charge", - .default_trigger = "sharpsl-charge", - .gpio = SPITZ_GPIO_LED_ORANGE, - }, - { - .name = "spitz:green:hddactivity", - .default_trigger = "disk-activity", - .gpio = SPITZ_GPIO_LED_GREEN, - }, +static const struct software_node spitz_gpio_leds_node = { + .name = "spitz-leds", }; -static struct gpio_led_platform_data spitz_gpio_leds_info = { - .leds = spitz_gpio_leds, - .num_leds = ARRAY_SIZE(spitz_gpio_leds), +static const struct property_entry spitz_orange_led_props[] = { + PROPERTY_ENTRY_STRING("linux,default-trigger", "sharpsl-charge"), + PROPERTY_ENTRY_GPIO("gpios", + &spitz_scoop_1_gpiochip_node, 6, GPIO_ACTIVE_HIGH), + { } }; -static struct platform_device spitz_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &spitz_gpio_leds_info, - }, +static const struct software_node spitz_orange_led_node = { + .name = "spitz:amber:charge", + .parent = &spitz_gpio_leds_node, + .properties = spitz_orange_led_props, +}; + +static const struct property_entry spitz_green_led_props[] = { + PROPERTY_ENTRY_STRING("linux,default-trigger", "disk-activity"), + PROPERTY_ENTRY_GPIO("gpios", + &spitz_scoop_1_gpiochip_node, 0, GPIO_ACTIVE_HIGH), + { } +}; + +static const struct software_node spitz_green_led_node = { + .name = "spitz:green:hddactivity", + .parent = &spitz_gpio_leds_node, + .properties = spitz_green_led_props, +}; + +static const struct software_node *spitz_gpio_leds_swnodes[] = { + &spitz_gpio_leds_node, + &spitz_orange_led_node, + &spitz_green_led_node, + NULL }; static void __init spitz_leds_init(void) { - platform_device_register(&spitz_led_device); + struct platform_device_info led_info = { + .name = "leds-gpio", + .id = PLATFORM_DEVID_NONE, + }; + struct platform_device *led_dev; + int err; + + err = software_node_register_node_group(spitz_gpio_leds_swnodes); + if (err) { + pr_err("failed to register LED software nodes: %d\n", err); + return; + } + + led_info.fwnode = software_node_fwnode(&spitz_gpio_leds_node); + + led_dev = platform_device_register_full(&led_info); + err = PTR_ERR_OR_ZERO(led_dev); + if (err) + pr_err("failed to create LED device: %d\n", err); } #else static inline void spitz_leds_init(void) {} @@ -490,53 +589,43 @@ static inline void spitz_leds_init(void) {} * SSP Devices ******************************************************************************/ #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static void spitz_ads7846_wait_for_hsync(void) -{ - while (gpio_get_value(SPITZ_GPIO_HSYNC)) - cpu_relax(); - while (!gpio_get_value(SPITZ_GPIO_HSYNC)) - cpu_relax(); -} +static const struct property_entry spitz_ads7846_props[] = { + PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"), + PROPERTY_ENTRY_U32("touchscreen-max-pressure", 1024), + PROPERTY_ENTRY_U16("ti,x-plate-ohms", 419), + PROPERTY_ENTRY_U16("ti,y-plate-ohms", 486), + PROPERTY_ENTRY_U16("ti,vref-delay-usecs", 100), + PROPERTY_ENTRY_GPIO("pendown-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_TP_INT, GPIO_ACTIVE_LOW), + PROPERTY_ENTRY_GPIO("ti,hsync-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_HSYNC, GPIO_ACTIVE_LOW), + { } +}; -static struct ads7846_platform_data spitz_ads7846_info = { - .model = 7846, - .vref_delay_usecs = 100, - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .pressure_max = 1024, - .wait_for_sync = spitz_ads7846_wait_for_hsync, +static const struct software_node spitz_ads7846_swnode = { + .name = "ads7846", + .properties = spitz_ads7846_props, }; -static struct gpiod_lookup_table spitz_ads7846_gpio_table = { - .dev_id = "spi2.0", - .table = { - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT, - "pendown", GPIO_ACTIVE_LOW), - { } - }, +static const struct property_entry spitz_lcdcon_props[] = { + PROPERTY_ENTRY_GPIO("BL_CONT-gpios", + &spitz_scoop_2_gpiochip_node, 6, GPIO_ACTIVE_LOW), + PROPERTY_ENTRY_GPIO("BL_ON-gpios", + &spitz_scoop_2_gpiochip_node, 7, GPIO_ACTIVE_HIGH), + { } }; -static struct gpiod_lookup_table spitz_lcdcon_gpio_table = { - .dev_id = "spi2.1", - .table = { - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT, - "BL_CONT", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON, - "BL_ON", GPIO_ACTIVE_HIGH), - { }, - }, +static const struct property_entry akita_lcdcon_props[] = { + PROPERTY_ENTRY_GPIO("BL_ON-gpios", + &akita_max7310_gpiochip_node, 3, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("BL_CONT-gpios", + &akita_max7310_gpiochip_node, 4, GPIO_ACTIVE_LOW), + { } }; -static struct gpiod_lookup_table akita_lcdcon_gpio_table = { - .dev_id = "spi2.1", - .table = { - GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT, - "BL_CONT", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON, - "BL_ON", GPIO_ACTIVE_HIGH), - { }, - }, +static struct software_node spitz_lcdcon_node = { + .name = "spitz-lcdcon", }; static struct corgi_lcd_platform_data spitz_lcdcon_info = { @@ -553,7 +642,7 @@ static struct spi_board_info spitz_spi_devices[] = { .max_speed_hz = 1200000, .bus_num = 2, .chip_select = 0, - .platform_data = &spitz_ads7846_info, + .swnode = &spitz_ads7846_swnode, .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT), }, { .modalias = "corgi-lcd", @@ -561,6 +650,7 @@ static struct spi_board_info spitz_spi_devices[] = { .bus_num = 2, .chip_select = 1, .platform_data = &spitz_lcdcon_info, + .swnode = &spitz_lcdcon_node, }, { .modalias = "max1111", .max_speed_hz = 450000, @@ -569,30 +659,40 @@ static struct spi_board_info spitz_spi_devices[] = { }, }; -static struct pxa2xx_spi_controller spitz_spi_info = { - .num_chipselect = 3, +static const struct software_node_ref_args spitz_spi_gpio_refs[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_ADS7846_CS, + GPIO_ACTIVE_LOW), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_LCDCON_CS, + GPIO_ACTIVE_LOW), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_MAX1111_CS, + GPIO_ACTIVE_LOW), }; -static struct gpiod_lookup_table spitz_spi_gpio_table = { - .dev_id = "spi2", - .table = { - GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW), - { }, - }, +static const struct property_entry spitz_spi_properties[] = { + PROPERTY_ENTRY_REF_ARRAY("gpios", spitz_spi_gpio_refs), + { } +}; + +static const struct platform_device_info spitz_spi_device_info = { + .name = "pxa2xx-spi", + /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1 */ + .id = 2, + .properties = spitz_spi_properties, }; static void __init spitz_spi_init(void) { - if (machine_is_akita()) - gpiod_add_lookup_table(&akita_lcdcon_gpio_table); - else - gpiod_add_lookup_table(&spitz_lcdcon_gpio_table); + struct platform_device *pd; + int err; + + pd = platform_device_register_full(&spitz_spi_device_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("pxa2xx-spi: failed to instantiate SPI controller: %d\n", + err); - gpiod_add_lookup_table(&spitz_ads7846_gpio_table); - gpiod_add_lookup_table(&spitz_spi_gpio_table); - pxa2xx_set_spi_info(2, &spitz_spi_info); + spitz_lcdcon_node.properties = machine_is_akita() ? + akita_lcdcon_props : spitz_lcdcon_props; spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); } #else @@ -625,21 +725,17 @@ static struct pxamci_platform_data spitz_mci_platform_data = { .setpower = spitz_mci_setpower, }; -static struct gpiod_lookup_table spitz_mci_gpio_table = { - .dev_id = "pxa2xx-mci.0", - .table = { - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_DETECT, - "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_WP, - "wp", GPIO_ACTIVE_LOW), - { }, - }, +static const struct property_entry spitz_mci_props[] __initconst = { + PROPERTY_ENTRY_GPIO("cd-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_nSD_DETECT, GPIO_ACTIVE_LOW), + PROPERTY_ENTRY_GPIO("wp-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_nSD_WP, GPIO_ACTIVE_LOW), + { } }; static void __init spitz_mmc_init(void) { - gpiod_add_lookup_table(&spitz_mci_gpio_table); - pxa_set_mci_info(&spitz_mci_platform_data); + pxa_set_mci_info(&spitz_mci_platform_data, spitz_mci_props); } #else static inline void spitz_mmc_init(void) {} @@ -938,30 +1034,24 @@ static void __init spitz_i2c_init(void) static inline void spitz_i2c_init(void) {} #endif -static struct gpiod_lookup_table spitz_audio_gpio_table = { - .dev_id = "spitz-audio", - .table = { - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, - "mute-l", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, - "mute-r", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE, - "mic", GPIO_ACTIVE_HIGH), - { }, - }, +static const struct property_entry spitz_audio_props[] = { + PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mic-gpios", &spitz_scoop_2_gpiochip_node, 8, + GPIO_ACTIVE_HIGH), + { } }; -static struct gpiod_lookup_table akita_audio_gpio_table = { - .dev_id = "spitz-audio", - .table = { - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, - "mute-l", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, - "mute-r", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE, - "mic", GPIO_ACTIVE_HIGH), - { }, - }, +static const struct property_entry akita_audio_props[] = { + PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mic-gpios", &akita_max7310_gpiochip_node, 2, + GPIO_ACTIVE_HIGH), + { } }; /****************************************************************************** @@ -969,12 +1059,14 @@ static struct gpiod_lookup_table akita_audio_gpio_table = { ******************************************************************************/ static inline void spitz_audio_init(void) { - if (machine_is_akita()) - gpiod_add_lookup_table(&akita_audio_gpio_table); - else - gpiod_add_lookup_table(&spitz_audio_gpio_table); - - platform_device_register_simple("spitz-audio", -1, NULL, 0); + struct platform_device_info audio_info = { + .name = "spitz-audio", + .id = PLATFORM_DEVID_NONE, + .properties = machine_is_akita() ? + akita_audio_props : spitz_audio_props, + }; + + platform_device_register_full(&audio_info); } /****************************************************************************** @@ -997,6 +1089,12 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd) static void __init spitz_init(void) { + software_node_register(&spitz_scoop_1_gpiochip_node); + if (machine_is_akita()) + software_node_register(&akita_max7310_gpiochip_node); + else + software_node_register(&spitz_scoop_2_gpiochip_node); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 8bc4ea51a0c1..03b4b347f11a 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -35,18 +35,20 @@ static int spitz_last_ac_status; -static struct gpio spitz_charger_gpios[] = { - { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, - { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, - { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, - { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, - { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, - { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, -}; - static void spitz_charger_init(void) { - gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios)); + gpio_request(SPITZ_GPIO_KEY_INT, "Keyboard Interrupt"); + gpio_direction_input(SPITZ_GPIO_KEY_INT); + gpio_request(SPITZ_GPIO_SYNC, "Sync"); + gpio_direction_input(SPITZ_GPIO_SYNC); + gpio_request(SPITZ_GPIO_AC_IN, "Charger Detection"); + gpio_direction_input(SPITZ_GPIO_AC_IN); + gpio_request(SPITZ_GPIO_ADC_TEMP_ON, "ADC Temp On"); + gpio_direction_output(SPITZ_GPIO_ADC_TEMP_ON, 0); + gpio_request(SPITZ_GPIO_JK_B, "JK B"); + gpio_direction_output(SPITZ_GPIO_JK_B, 0); + gpio_request(SPITZ_GPIO_CHRG_ON, "Charger On"); + gpio_direction_output(SPITZ_GPIO_CHRG_ON, 0); } static void spitz_measure_temp(int on) diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index c30df1097c52..2cde4c83b7f9 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -1109,7 +1109,7 @@ void ecard_remove_driver(struct ecard_driver *drv) driver_unregister(&drv->drv); } -static int ecard_match(struct device *_dev, struct device_driver *_drv) +static int ecard_match(struct device *_dev, const struct device_driver *_drv) { struct expansion_card *ec = ECARD_DEV(_dev); struct ecard_driver *drv = ECARD_DRV(_drv); @@ -1124,7 +1124,7 @@ static int ecard_match(struct device *_dev, struct device_driver *_drv) return ret; } -struct bus_type ecard_bus_type = { +const struct bus_type ecard_bus_type = { .name = "ecard", .dev_groups = ecard_dev_groups, .match = ecard_match, diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile index 713827bef831..988c49672715 100644 --- a/arch/arm/mach-s3c/Makefile +++ b/arch/arm/mach-s3c/Makefile @@ -2,7 +2,7 @@ # # Copyright 2009 Simtec Electronics -include $(srctree)/$(src)/Makefile.s3c64xx +include $(src)/Makefile.s3c64xx # Objects we always build independent of SoC choice diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c index 8c26d592d2a3..bab2abd8a34a 100644 --- a/arch/arm/mach-s3c/devs.c +++ b/arch/arm/mach-s3c/devs.c @@ -19,7 +19,6 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/dma-mapping.h> -#include <linux/fb.h> #include <linux/gfp.h> #include <linux/mmc/host.h> #include <linux/ioport.h> diff --git a/arch/arm/mach-s3c/irq-uart-s3c64xx.h b/arch/arm/mach-s3c/irq-uart-s3c64xx.h index 78eccdce95a7..e754b0359c8a 100644 --- a/arch/arm/mach-s3c/irq-uart-s3c64xx.h +++ b/arch/arm/mach-s3c/irq-uart-s3c64xx.h @@ -12,5 +12,3 @@ struct s3c_uart_irq { unsigned int parent_irq; }; -extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs); - diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c index 2de1a89f6e99..4ffcf024b09d 100644 --- a/arch/arm/mach-s3c/mach-crag6410-module.c +++ b/arch/arm/mach-s3c/mach-crag6410-module.c @@ -446,7 +446,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c) } static const struct i2c_device_id wlf_gf_module_id[] = { - { "wlf-gf-module", 0 }, + { "wlf-gf-module" }, { } }; diff --git a/arch/arm/mach-s3c/pm.h b/arch/arm/mach-s3c/pm.h index 35d266ab6958..d48d15088525 100644 --- a/arch/arm/mach-s3c/pm.h +++ b/arch/arm/mach-s3c/pm.h @@ -48,8 +48,6 @@ extern unsigned long s3c_pm_flags; /* from sleep.S */ -extern int s3c2410_cpu_suspend(unsigned long); - #ifdef CONFIG_PM_SLEEP extern int s3c_irq_wake(struct irq_data *data, unsigned int state); extern void s3c_cpu_resume(void); diff --git a/arch/arm/mach-s3c/s3c64xx.h b/arch/arm/mach-s3c/s3c64xx.h index 92258e4f60f6..0505728f3f7b 100644 --- a/arch/arm/mach-s3c/s3c64xx.h +++ b/arch/arm/mach-s3c/s3c64xx.h @@ -23,17 +23,6 @@ struct device_node; void s3c64xx_set_xtal_freq(unsigned long freq); void s3c64xx_set_xusbxti_freq(unsigned long freq); -#ifdef CONFIG_CPU_S3C6400 - -extern int s3c6400_init(void); -extern void s3c6400_init_irq(void); -extern void s3c6400_map_io(void); - -#else -#define s3c6400_map_io NULL -#define s3c6400_init NULL -#endif - #ifdef CONFIG_CPU_S3C6410 extern int s3c6410_init(void); diff --git a/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c index cfa34b55ca21..c3269cd6a848 100644 --- a/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c +++ b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c @@ -9,7 +9,6 @@ #include <linux/kernel.h> #include <linux/types.h> -#include <linux/fb.h> #include <linux/gpio.h> #include "fb.h" diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 5e25dfa752e9..1cfc0b1fa41c 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -20,16 +20,6 @@ #include "generic.h" -/* - * helper for sa1100fb - */ -static struct gpio h3600_lcd_gpio[] = { - { H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD power" }, - { H3600_EGPIO_LCD_PCI, GPIOF_OUT_INIT_LOW, "LCD control" }, - { H3600_EGPIO_LCD_5V_ON, GPIOF_OUT_INIT_LOW, "LCD 5v" }, - { H3600_EGPIO_LVDD_ON, GPIOF_OUT_INIT_LOW, "LCD 9v/-6.5v" }, -}; - static bool h3600_lcd_request(void) { static bool h3600_lcd_ok; @@ -38,7 +28,42 @@ static bool h3600_lcd_request(void) if (h3600_lcd_ok) return true; - rc = gpio_request_array(h3600_lcd_gpio, ARRAY_SIZE(h3600_lcd_gpio)); + rc = gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power"); + if (rc) + goto out; + rc = gpio_direction_output(H3XXX_EGPIO_LCD_ON, 0); + if (rc) + goto out_free_on; + rc = gpio_request(H3600_EGPIO_LCD_PCI, "LCD control"); + if (rc) + goto out_free_on; + rc = gpio_direction_output(H3600_EGPIO_LCD_PCI, 0); + if (rc) + goto out_free_pci; + rc = gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v"); + if (rc) + goto out_free_pci; + rc = gpio_direction_output(H3600_EGPIO_LCD_5V_ON, 0); + if (rc) + goto out_free_5v_on; + rc = gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v"); + if (rc) + goto out_free_5v_on; + rc = gpio_direction_output(H3600_EGPIO_LVDD_ON, 0); + if (rc) + goto out_free_lvdd_on; + + goto out; + +out_free_lvdd_on: + gpio_free(H3600_EGPIO_LVDD_ON); +out_free_5v_on: + gpio_free(H3600_EGPIO_LCD_5V_ON); +out_free_pci: + gpio_free(H3600_EGPIO_LCD_PCI); +out_free_on: + gpio_free(H3XXX_EGPIO_LCD_ON); +out: if (rc) pr_err("%s: can't request GPIOs\n", __func__); else diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 1956b095e699..d94810217095 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -188,7 +188,7 @@ static void jornada_ssp_remove(struct platform_device *dev) struct platform_driver jornadassp_driver = { .probe = jornada_ssp_probe, - .remove_new = jornada_ssp_remove, + .remove = jornada_ssp_remove, .driver = { .name = "jornada_ssp", }, diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 0ef0ebbf31ac..88fe79f0a4ed 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -423,7 +423,7 @@ static const struct dev_pm_ops neponset_pm_ops = { static struct platform_driver neponset_device_driver = { .probe = neponset_probe, - .remove_new = neponset_remove, + .remove = neponset_remove, .driver = { .name = "neponset", .pm = PM_OPS, diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index a956b489b6ea..2bc7e73a8582 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -136,6 +136,7 @@ ENDPROC(shmobile_smp_sleep) .long shmobile_smp_arg - 1b .bss + .align 2 .globl shmobile_smp_mpidr shmobile_smp_mpidr: .space NR_CPUS * 4 diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index c38367a10c79..3cd34a42e39b 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -8,19 +8,15 @@ */ #include <linux/clocksource.h> -#include <linux/device.h> -#include <linux/dma-map-ops.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/memblock.h> #include <linux/of.h> #include <linux/of_clk.h> -#include <linux/of_fdt.h> #include <linux/psci.h> #include <asm/mach/arch.h> #include <asm/secure_cntvoff.h> #include "common.h" -#include "rcar-gen2.h" static const struct of_device_id cpg_matches[] __initconst = { { .compatible = "renesas,r8a7742-cpg-mssr", .data = "extal" }, @@ -122,76 +118,6 @@ skip_update: timer_probe(); } -struct memory_reserve_config { - u64 reserved; - u64 base, size; -}; - -static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname, - int depth, void *data) -{ - const char *type = of_get_flat_dt_prop(node, "device_type", NULL); - const __be32 *reg, *endp; - int l; - struct memory_reserve_config *mrc = data; - u64 lpae_start = 1ULL << 32; - - /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory")) - return 0; - - reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); - if (reg == NULL) - reg = of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; - - endp = reg + (l / sizeof(__be32)); - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - u64 base, size; - - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); - - if (base >= lpae_start) - continue; - - if ((base + size) >= lpae_start) - size = lpae_start - base; - - if (size < mrc->reserved) - continue; - - if (base < mrc->base) - continue; - - /* keep the area at top near the 32-bit legacy limit */ - mrc->base = base + size - mrc->reserved; - mrc->size = mrc->reserved; - } - - return 0; -} - -static void __init rcar_gen2_reserve(void) -{ - struct memory_reserve_config mrc; - - /* reserve 256 MiB at the top of the physical legacy 32-bit space */ - memset(&mrc, 0, sizeof(mrc)); - mrc.reserved = SZ_256M; - - of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); -#ifdef CONFIG_DMA_CMA - if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) { - static struct cma *rcar_gen2_dma_contiguous; - - dma_contiguous_reserve_area(mrc.size, mrc.base, 0, - &rcar_gen2_dma_contiguous, true); - } -#endif -} - static const char * const rcar_gen2_boards_compat_dt[] __initconst = { "renesas,r8a7790", "renesas,r8a7791", @@ -204,7 +130,6 @@ static const char * const rcar_gen2_boards_compat_dt[] __initconst = { DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)") .init_late = shmobile_init_late, .init_time = rcar_gen2_timer_init, - .reserve = rcar_gen2_reserve, .dt_compat = rcar_gen2_boards_compat_dt, MACHINE_END @@ -220,6 +145,5 @@ static const char * const rz_g1_boards_compat_dt[] __initconst = { DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)") .init_late = shmobile_init_late, .init_time = rcar_gen2_timer_init, - .reserve = rcar_gen2_reserve, .dt_compat = rz_g1_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 98145031586f..630b992f32b1 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -11,7 +11,8 @@ menuconfig ARCH_STM32 select CLKSRC_STM32 select PINCTRL select RESET_CONTROLLER - select STM32_EXTI + select STM32_EXTI if ARM_SINGLE_ARMV7M + select STM32_FIREWALL help Support for STMicroelectronics STM32 processors. diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 18d37f90cdfe..3ec810b6f1a7 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -8,35 +8,49 @@ * Copyright (C) 2010 Google, Inc. */ -#include <linux/property.h> +#include <linux/err.h> #include <linux/gpio/machine.h> +#include <linux/gpio/property.h> #include <linux/platform_device.h> +#include <linux/printk.h> +#include <linux/property.h> #include "board.h" -static struct property_entry wifi_rfkill_prop[] __initdata = { - PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), - PROPERTY_ENTRY_STRING("type", "wlan"), - { }, +static const struct software_node tegra_gpiochip_node = { + .name = "tegra-gpio", }; -static struct platform_device wifi_rfkill_device = { - .name = "rfkill_gpio", - .id = -1, +static const struct property_entry wifi_rfkill_prop[] __initconst = { + PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), + PROPERTY_ENTRY_STRING("type", "wlan"), + PROPERTY_ENTRY_GPIO("reset-gpios", + &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("shutdown-gpios", + &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH), + { } }; -static struct gpiod_lookup_table wifi_gpio_lookup = { - .dev_id = "rfkill_gpio", - .table = { - GPIO_LOOKUP("tegra-gpio", 25, "reset", 0), - GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0), - { }, - }, +static const struct platform_device_info wifi_rfkill_info __initconst = { + .name = "rfkill_gpio", + .id = PLATFORM_DEVID_NONE, + .properties = wifi_rfkill_prop, }; void __init tegra_paz00_wifikill_init(void) { - device_create_managed_software_node(&wifi_rfkill_device.dev, wifi_rfkill_prop, NULL); - gpiod_add_lookup_table(&wifi_gpio_lookup); - platform_device_register(&wifi_rfkill_device); + struct platform_device *pd; + int err; + + err = software_node_register(&tegra_gpiochip_node); + if (err) { + pr_err("failed to register %s node: %d\n", + tegra_gpiochip_node.name, err); + return; + } + + pd = platform_device_register_full(&wifi_rfkill_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("failed to register WiFi rfkill device: %d\n", err); } diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index e029270c2687..513618078440 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -278,15 +278,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA build a working kernel, you must also enable relevant core tile support or Flattened Device Tree based support options. -config ARCH_VEXPRESS_DCSCB - bool "Dual Cluster System Control Block (DCSCB) support" - depends on MCPM - select ARM_CCI400_PORT_CTRL - help - Support for the Dual Cluster System Configuration Block (DCSCB). - This is needed to provide CPU and cluster power management - on RTSM implementing big.LITTLE. - config ARCH_VEXPRESS_SPC bool "Versatile Express Serial Power Controller (SPC)" select PM_OPP diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 27d712bcf1af..d819fb2fc450 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -16,9 +16,6 @@ obj-$(CONFIG_ARCH_REALVIEW) += realview.o # vexpress obj-$(CONFIG_ARCH_VEXPRESS) := v2m.o -obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o -CFLAGS_dcscb.o += -march=armv7-a -CFLAGS_REMOVE_dcscb.o = -pg obj-$(CONFIG_ARCH_VEXPRESS_SPC) += spc.o CFLAGS_REMOVE_spc.o = -pg obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o diff --git a/arch/arm/mach-versatile/dcscb.c b/arch/arm/mach-versatile/dcscb.c deleted file mode 100644 index d8797350996d..000000000000 --- a/arch/arm/mach-versatile/dcscb.c +++ /dev/null @@ -1,173 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * dcscb.c - Dual Cluster System Configuration Block - * - * Created by: Nicolas Pitre, May 2012 - * Copyright: (C) 2012-2013 Linaro Limited - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/of_address.h> -#include <linux/vexpress.h> -#include <linux/arm-cci.h> - -#include <asm/mcpm.h> -#include <asm/proc-fns.h> -#include <asm/cacheflush.h> -#include <asm/cputype.h> -#include <asm/cp15.h> - -#include "vexpress.h" - -#define RST_HOLD0 0x0 -#define RST_HOLD1 0x4 -#define SYS_SWRESET 0x8 -#define RST_STAT0 0xc -#define RST_STAT1 0x10 -#define EAG_CFG_R 0x20 -#define EAG_CFG_W 0x24 -#define KFC_CFG_R 0x28 -#define KFC_CFG_W 0x2c -#define DCS_CFG_R 0x30 - -static void __iomem *dcscb_base; -static int dcscb_allcpus_mask[2]; - -static int dcscb_cpu_powerup(unsigned int cpu, unsigned int cluster) -{ - unsigned int rst_hold, cpumask = (1 << cpu); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - if (cluster >= 2 || !(cpumask & dcscb_allcpus_mask[cluster])) - return -EINVAL; - - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - rst_hold &= ~(cpumask | (cpumask << 4)); - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); - return 0; -} - -static int dcscb_cluster_powerup(unsigned int cluster) -{ - unsigned int rst_hold; - - pr_debug("%s: cluster %u\n", __func__, cluster); - if (cluster >= 2) - return -EINVAL; - - /* remove cluster reset and add individual CPU's reset */ - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - rst_hold &= ~(1 << 8); - rst_hold |= dcscb_allcpus_mask[cluster]; - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); - return 0; -} - -static void dcscb_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) -{ - unsigned int rst_hold; - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cluster >= 2 || !((1 << cpu) & dcscb_allcpus_mask[cluster])); - - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - rst_hold |= (1 << cpu); - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); -} - -static void dcscb_cluster_powerdown_prepare(unsigned int cluster) -{ - unsigned int rst_hold; - - pr_debug("%s: cluster %u\n", __func__, cluster); - BUG_ON(cluster >= 2); - - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - rst_hold |= (1 << 8); - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); -} - -static void dcscb_cpu_cache_disable(void) -{ - /* Disable and flush the local CPU cache. */ - v7_exit_coherency_flush(louis); -} - -static void dcscb_cluster_cache_disable(void) -{ - /* Flush all cache levels for this cluster. */ - v7_exit_coherency_flush(all); - - /* - * A full outer cache flush could be needed at this point - * on platforms with such a cache, depending on where the - * outer cache sits. In some cases the notion of a "last - * cluster standing" would need to be implemented if the - * outer cache is shared across clusters. In any case, when - * the outer cache needs flushing, there is no concurrent - * access to the cache controller to worry about and no - * special locking besides what is already provided by the - * MCPM state machinery is needed. - */ - - /* - * Disable cluster-level coherency by masking - * incoming snoops and DVM messages: - */ - cci_disable_port_by_cpu(read_cpuid_mpidr()); -} - -static const struct mcpm_platform_ops dcscb_power_ops = { - .cpu_powerup = dcscb_cpu_powerup, - .cluster_powerup = dcscb_cluster_powerup, - .cpu_powerdown_prepare = dcscb_cpu_powerdown_prepare, - .cluster_powerdown_prepare = dcscb_cluster_powerdown_prepare, - .cpu_cache_disable = dcscb_cpu_cache_disable, - .cluster_cache_disable = dcscb_cluster_cache_disable, -}; - -extern void dcscb_power_up_setup(unsigned int affinity_level); - -static int __init dcscb_init(void) -{ - struct device_node *node; - unsigned int cfg; - int ret; - - if (!cci_probed()) - return -ENODEV; - - node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb"); - if (!node) - return -ENODEV; - dcscb_base = of_iomap(node, 0); - of_node_put(node); - if (!dcscb_base) - return -EADDRNOTAVAIL; - cfg = readl_relaxed(dcscb_base + DCS_CFG_R); - dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1; - dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1; - - ret = mcpm_platform_register(&dcscb_power_ops); - if (!ret) - ret = mcpm_sync_init(dcscb_power_up_setup); - if (ret) { - iounmap(dcscb_base); - return ret; - } - - pr_info("VExpress DCSCB support installed\n"); - - /* - * Future entries into the kernel can now go - * through the cluster entry vectors. - */ - vexpress_flags_set(__pa_symbol(mcpm_entry_point)); - - return 0; -} - -early_initcall(dcscb_init); diff --git a/arch/arm/mach-versatile/dcscb_setup.S b/arch/arm/mach-versatile/dcscb_setup.S deleted file mode 100644 index 92d1fd9d7f6a..000000000000 --- a/arch/arm/mach-versatile/dcscb_setup.S +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Created by: Dave Martin, 2012-06-22 - * Copyright: (C) 2012-2013 Linaro Limited - */ - -#include <linux/linkage.h> - - -ENTRY(dcscb_power_up_setup) - - cmp r0, #0 @ check affinity level - beq 2f - -/* - * Enable cluster-level coherency, in preparation for turning on the MMU. - * The ACTLR SMP bit does not need to be set here, because cpu_resume() - * already restores that. - * - * A15/A7 may not require explicit L2 invalidation on reset, dependent - * on hardware integration decisions. - * For now, this code assumes that L2 is either already invalidated, - * or invalidation is not required. - */ - - b cci_enable_port_for_self - -2: @ Implementation-specific local CPU setup operations should go here, - @ if any. In this case, there is nothing to do. - - bx lr - -ENDPROC(dcscb_power_up_setup) diff --git a/arch/arm/mach-versatile/platsmp-realview.c b/arch/arm/mach-versatile/platsmp-realview.c index 6965a1de727b..d38b2e174257 100644 --- a/arch/arm/mach-versatile/platsmp-realview.c +++ b/arch/arm/mach-versatile/platsmp-realview.c @@ -70,6 +70,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus) return; } map = syscon_node_to_regmap(np); + of_node_put(np); if (IS_ERR(map)) { pr_err("PLATSMP: No syscon regmap\n"); return; diff --git a/arch/arm/mach-versatile/spc.c b/arch/arm/mach-versatile/spc.c index 5e44170e1a9a..790092734cf6 100644 --- a/arch/arm/mach-versatile/spc.c +++ b/arch/arm/mach-versatile/spc.c @@ -73,7 +73,7 @@ /* * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS - * operation, the operation could start just before jiffie is about + * operation, the operation could start just before jiffy is about * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz */ #define TIMEOUT_US 20000 diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 60e662324699..83a79d0c0bec 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -9,7 +9,6 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -extern int zynq_slcr_init(void); extern int zynq_early_slcr_init(void); extern void zynq_slcr_cpu_stop(int cpu); extern void zynq_slcr_cpu_start(int cpu); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 2b6f50dd5478..5c1023a6d78c 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -928,6 +928,7 @@ config VDSO select GENERIC_TIME_VSYSCALL select GENERIC_VDSO_32 select GENERIC_GETTIMEOFDAY + select GENERIC_VDSO_DATA_STORE help Place in the process address space an ELF shared object providing fast implementations of gettimeofday and diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 71b858c9b10c..a195cd1d3e6d 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -21,7 +21,6 @@ KASAN_SANITIZE_physaddr.o := n obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o -obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_ARM_PV_FIXUP) += pv-fixup-asm.o obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o @@ -45,6 +44,7 @@ obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o obj-$(CONFIG_CPU_CACHE_NOP) += cache-nop.o obj-$(CONFIG_CPU_CACHE_V7M) += cache-v7m.o +obj-y += cache.o obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o @@ -62,6 +62,7 @@ obj-$(CONFIG_CPU_TLB_FEROCEON) += tlb-v4wbi.o # reuse v4wbi TLB functions obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o +obj-y += tlb.o obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o @@ -88,6 +89,7 @@ obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V6K) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o proc-v7-bugs.o obj-$(CONFIG_CPU_V7M) += proc-v7m.o +obj-$(CONFIG_CFI_CLANG) += proc.o obj-$(CONFIG_OUTER_CACHE) += l2c-common.o obj-$(CONFIG_CACHE_B15_RAC) += cache-b15-rac.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index f8dd0b3cc8e0..3c6ddb1afdc4 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,7 +22,7 @@ #include <asm/cp15.h> #include <asm/system_info.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <asm/opcodes.h> #include "fault.h" diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c index 9c1172f26885..6f63b90f9e1a 100644 --- a/arch/arm/mm/cache-b15-rac.c +++ b/arch/arm/mm/cache-b15-rac.c @@ -5,6 +5,7 @@ * Copyright (C) 2015-2016 Broadcom */ +#include <linux/cfi_types.h> #include <linux/err.h> #include <linux/spinlock.h> #include <linux/io.h> diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index 71c64e92dead..4a3668b52a2d 100644 --- a/arch/arm/mm/cache-fa.S +++ b/arch/arm/mm/cache-fa.S @@ -12,6 +12,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/page.h> @@ -39,11 +40,11 @@ * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(fa_flush_icache_all) +SYM_TYPED_FUNC_START(fa_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(fa_flush_icache_all) +SYM_FUNC_END(fa_flush_icache_all) /* * flush_user_cache_all() @@ -51,14 +52,14 @@ ENDPROC(fa_flush_icache_all) * Clean and invalidate all cache entries in a particular address * space. */ -ENTRY(fa_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(fa_flush_user_cache_all, fa_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(fa_flush_kern_cache_all) +SYM_TYPED_FUNC_START(fa_flush_kern_cache_all) mov ip, #0 mov r2, #VM_EXEC __flush_whole_cache: @@ -69,6 +70,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush ret lr +SYM_FUNC_END(fa_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -80,7 +82,7 @@ __flush_whole_cache: * - end - end address (exclusive, page aligned) * - flags - vma_area_struct flags describing address space */ -ENTRY(fa_flush_user_cache_range) +SYM_TYPED_FUNC_START(fa_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @ total size >= limit? @@ -97,6 +99,7 @@ ENTRY(fa_flush_user_cache_range) mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush ret lr +SYM_FUNC_END(fa_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -108,8 +111,11 @@ ENTRY(fa_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(fa_coherent_kern_range) - /* fall through */ +SYM_TYPED_FUNC_START(fa_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b fa_coherent_user_range +#endif +SYM_FUNC_END(fa_coherent_kern_range) /* * coherent_user_range(start, end) @@ -121,7 +127,7 @@ ENTRY(fa_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(fa_coherent_user_range) +SYM_TYPED_FUNC_START(fa_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -133,6 +139,7 @@ ENTRY(fa_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c7, c5, 4 @ prefetch flush ret lr +SYM_FUNC_END(fa_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -143,7 +150,7 @@ ENTRY(fa_coherent_user_range) * - addr - kernel address * - size - size of region */ -ENTRY(fa_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(fa_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line add r0, r0, #CACHE_DLINESIZE @@ -153,6 +160,7 @@ ENTRY(fa_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ret lr +SYM_FUNC_END(fa_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -203,7 +211,7 @@ fa_dma_clean_range: * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(fa_dma_flush_range) +SYM_TYPED_FUNC_START(fa_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -212,6 +220,7 @@ ENTRY(fa_dma_flush_range) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ret lr +SYM_FUNC_END(fa_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -219,13 +228,13 @@ ENTRY(fa_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(fa_dma_map_area) +SYM_TYPED_FUNC_START(fa_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq fa_dma_clean_range bcs fa_dma_inv_range b fa_dma_flush_range -ENDPROC(fa_dma_map_area) +SYM_FUNC_END(fa_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -233,14 +242,6 @@ ENDPROC(fa_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(fa_dma_unmap_area) +SYM_TYPED_FUNC_START(fa_dma_unmap_area) ret lr -ENDPROC(fa_dma_unmap_area) - - .globl fa_flush_kern_cache_louis - .equ fa_flush_kern_cache_louis, fa_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions fa +SYM_FUNC_END(fa_dma_unmap_area) diff --git a/arch/arm/mm/cache-l2x0-pmu.c b/arch/arm/mm/cache-l2x0-pmu.c index 993fefdc167a..93ef0502b7ff 100644 --- a/arch/arm/mm/cache-l2x0-pmu.c +++ b/arch/arm/mm/cache-l2x0-pmu.c @@ -539,8 +539,7 @@ static __init int l2x0_pmu_init(void) * at higher frequencies. */ l2x0_pmu_poll_period = ms_to_ktime(1000); - hrtimer_init(&l2x0_pmu_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - l2x0_pmu_hrtimer.function = l2x0_pmu_poll; + hrtimer_setup(&l2x0_pmu_hrtimer, l2x0_pmu_poll, CLOCK_MONOTONIC, HRTIMER_MODE_REL); cpumask_set_cpu(0, &pmu_cpu); ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE, diff --git a/arch/arm/mm/cache-nop.S b/arch/arm/mm/cache-nop.S index 72d939ef8798..f68dde2014ee 100644 --- a/arch/arm/mm/cache-nop.S +++ b/arch/arm/mm/cache-nop.S @@ -1,47 +1,52 @@ /* SPDX-License-Identifier: GPL-2.0-only */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include "proc-macros.S" -ENTRY(nop_flush_icache_all) +/* + * These are all open-coded instead of aliased, to make clear + * what is going on here: all functions are stubbed out. + */ +SYM_TYPED_FUNC_START(nop_flush_icache_all) ret lr -ENDPROC(nop_flush_icache_all) +SYM_FUNC_END(nop_flush_icache_all) - .globl nop_flush_kern_cache_all - .equ nop_flush_kern_cache_all, nop_flush_icache_all - - .globl nop_flush_kern_cache_louis - .equ nop_flush_kern_cache_louis, nop_flush_icache_all +SYM_TYPED_FUNC_START(nop_flush_kern_cache_all) + ret lr +SYM_FUNC_END(nop_flush_kern_cache_all) - .globl nop_flush_user_cache_all - .equ nop_flush_user_cache_all, nop_flush_icache_all +SYM_TYPED_FUNC_START(nop_flush_user_cache_all) + ret lr +SYM_FUNC_END(nop_flush_user_cache_all) - .globl nop_flush_user_cache_range - .equ nop_flush_user_cache_range, nop_flush_icache_all +SYM_TYPED_FUNC_START(nop_flush_user_cache_range) + ret lr +SYM_FUNC_END(nop_flush_user_cache_range) - .globl nop_coherent_kern_range - .equ nop_coherent_kern_range, nop_flush_icache_all +SYM_TYPED_FUNC_START(nop_coherent_kern_range) + ret lr +SYM_FUNC_END(nop_coherent_kern_range) -ENTRY(nop_coherent_user_range) +SYM_TYPED_FUNC_START(nop_coherent_user_range) mov r0, 0 ret lr -ENDPROC(nop_coherent_user_range) - - .globl nop_flush_kern_dcache_area - .equ nop_flush_kern_dcache_area, nop_flush_icache_all +SYM_FUNC_END(nop_coherent_user_range) - .globl nop_dma_flush_range - .equ nop_dma_flush_range, nop_flush_icache_all - - .globl nop_dma_map_area - .equ nop_dma_map_area, nop_flush_icache_all +SYM_TYPED_FUNC_START(nop_flush_kern_dcache_area) + ret lr +SYM_FUNC_END(nop_flush_kern_dcache_area) - .globl nop_dma_unmap_area - .equ nop_dma_unmap_area, nop_flush_icache_all +SYM_TYPED_FUNC_START(nop_dma_flush_range) + ret lr +SYM_FUNC_END(nop_dma_flush_range) - __INITDATA +SYM_TYPED_FUNC_START(nop_dma_map_area) + ret lr +SYM_FUNC_END(nop_dma_map_area) - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions nop +SYM_TYPED_FUNC_START(nop_dma_unmap_area) + ret lr +SYM_FUNC_END(nop_dma_unmap_area) diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 7787057e4990..0e94e5193dbd 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/page.h> #include "proc-macros.S" @@ -15,9 +16,9 @@ * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(v4_flush_icache_all) +SYM_TYPED_FUNC_START(v4_flush_icache_all) ret lr -ENDPROC(v4_flush_icache_all) +SYM_FUNC_END(v4_flush_icache_all) /* * flush_user_cache_all() @@ -27,21 +28,22 @@ ENDPROC(v4_flush_icache_all) * * - mm - mm_struct describing address space */ -ENTRY(v4_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(v4_flush_user_cache_all, v4_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(v4_flush_kern_cache_all) +SYM_TYPED_FUNC_START(v4_flush_kern_cache_all) #ifdef CONFIG_CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache ret lr #else - /* FALLTHROUGH */ + ret lr #endif +SYM_FUNC_END(v4_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -53,14 +55,15 @@ ENTRY(v4_flush_kern_cache_all) * - end - end address (exclusive, may not be aligned) * - flags - vma_area_struct flags describing address space */ -ENTRY(v4_flush_user_cache_range) +SYM_TYPED_FUNC_START(v4_flush_user_cache_range) #ifdef CONFIG_CPU_CP15 mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ flush ID cache ret lr #else - /* FALLTHROUGH */ + ret lr #endif +SYM_FUNC_END(v4_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -72,8 +75,9 @@ ENTRY(v4_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(v4_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(v4_coherent_kern_range) + ret lr +SYM_FUNC_END(v4_coherent_kern_range) /* * coherent_user_range(start, end) @@ -85,9 +89,10 @@ ENTRY(v4_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(v4_coherent_user_range) +SYM_TYPED_FUNC_START(v4_coherent_user_range) mov r0, #0 ret lr +SYM_FUNC_END(v4_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -98,8 +103,11 @@ ENTRY(v4_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(v4_flush_kern_dcache_area) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(v4_flush_kern_dcache_area) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b v4_dma_flush_range +#endif +SYM_FUNC_END(v4_flush_kern_dcache_area) /* * dma_flush_range(start, end) @@ -109,12 +117,13 @@ ENTRY(v4_flush_kern_dcache_area) * - start - virtual start address * - end - virtual end address */ -ENTRY(v4_dma_flush_range) +SYM_TYPED_FUNC_START(v4_dma_flush_range) #ifdef CONFIG_CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache #endif ret lr +SYM_FUNC_END(v4_dma_flush_range) /* * dma_unmap_area(start, size, dir) @@ -122,10 +131,11 @@ ENTRY(v4_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(v4_dma_unmap_area) +SYM_TYPED_FUNC_START(v4_dma_unmap_area) teq r2, #DMA_TO_DEVICE bne v4_dma_flush_range - /* FALLTHROUGH */ + ret lr +SYM_FUNC_END(v4_dma_unmap_area) /* * dma_map_area(start, size, dir) @@ -133,15 +143,6 @@ ENTRY(v4_dma_unmap_area) * - size - size of region * - dir - DMA direction */ -ENTRY(v4_dma_map_area) +SYM_TYPED_FUNC_START(v4_dma_map_area) ret lr -ENDPROC(v4_dma_unmap_area) -ENDPROC(v4_dma_map_area) - - .globl v4_flush_kern_cache_louis - .equ v4_flush_kern_cache_louis, v4_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v4 +SYM_FUNC_END(v4_dma_map_area) diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index ad382cee0fdb..ce55a2eef5da 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/page.h> #include "proc-macros.S" @@ -53,11 +54,11 @@ flush_base: * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(v4wb_flush_icache_all) +SYM_TYPED_FUNC_START(v4wb_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(v4wb_flush_icache_all) +SYM_FUNC_END(v4wb_flush_icache_all) /* * flush_user_cache_all() @@ -65,14 +66,14 @@ ENDPROC(v4wb_flush_icache_all) * Clean and invalidate all cache entries in a particular address * space. */ -ENTRY(v4wb_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(v4wb_flush_user_cache_all, v4wb_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(v4wb_flush_kern_cache_all) +SYM_TYPED_FUNC_START(v4wb_flush_kern_cache_all) mov ip, #0 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache __flush_whole_cache: @@ -93,6 +94,7 @@ __flush_whole_cache: #endif mcr p15, 0, ip, c7, c10, 4 @ drain write buffer ret lr +SYM_FUNC_END(v4wb_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -104,7 +106,7 @@ __flush_whole_cache: * - end - end address (exclusive, page aligned) * - flags - vma_area_struct flags describing address space */ -ENTRY(v4wb_flush_user_cache_range) +SYM_TYPED_FUNC_START(v4wb_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size tst r2, #VM_EXEC @ executable region? @@ -121,6 +123,7 @@ ENTRY(v4wb_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer ret lr +SYM_FUNC_END(v4wb_flush_user_cache_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -131,9 +134,12 @@ ENTRY(v4wb_flush_user_cache_range) * - addr - kernel address * - size - region size */ -ENTRY(v4wb_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(v4wb_flush_kern_dcache_area) add r1, r0, r1 - /* fall through */ +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b v4wb_coherent_user_range +#endif +SYM_FUNC_END(v4wb_flush_kern_dcache_area) /* * coherent_kern_range(start, end) @@ -145,8 +151,11 @@ ENTRY(v4wb_flush_kern_dcache_area) * - start - virtual start address * - end - virtual end address */ -ENTRY(v4wb_coherent_kern_range) - /* fall through */ +SYM_TYPED_FUNC_START(v4wb_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b v4wb_coherent_user_range +#endif +SYM_FUNC_END(v4wb_coherent_kern_range) /* * coherent_user_range(start, end) @@ -158,7 +167,7 @@ ENTRY(v4wb_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(v4wb_coherent_user_range) +SYM_TYPED_FUNC_START(v4wb_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry @@ -169,7 +178,7 @@ ENTRY(v4wb_coherent_user_range) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr - +SYM_FUNC_END(v4wb_coherent_user_range) /* * dma_inv_range(start, end) @@ -231,13 +240,13 @@ v4wb_dma_clean_range: * - size - size of region * - dir - DMA direction */ -ENTRY(v4wb_dma_map_area) +SYM_TYPED_FUNC_START(v4wb_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq v4wb_dma_clean_range bcs v4wb_dma_inv_range b v4wb_dma_flush_range -ENDPROC(v4wb_dma_map_area) +SYM_FUNC_END(v4wb_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -245,14 +254,6 @@ ENDPROC(v4wb_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(v4wb_dma_unmap_area) +SYM_TYPED_FUNC_START(v4wb_dma_unmap_area) ret lr -ENDPROC(v4wb_dma_unmap_area) - - .globl v4wb_flush_kern_cache_louis - .equ v4wb_flush_kern_cache_louis, v4wb_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v4wb +SYM_FUNC_END(v4wb_dma_unmap_area) diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 0b290c25a99d..a97dc267b3b0 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -10,6 +10,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/page.h> #include "proc-macros.S" @@ -43,11 +44,11 @@ * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(v4wt_flush_icache_all) +SYM_TYPED_FUNC_START(v4wt_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(v4wt_flush_icache_all) +SYM_FUNC_END(v4wt_flush_icache_all) /* * flush_user_cache_all() @@ -55,14 +56,14 @@ ENDPROC(v4wt_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(v4wt_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(v4wt_flush_user_cache_all, v4wt_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(v4wt_flush_kern_cache_all) +SYM_TYPED_FUNC_START(v4wt_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -70,6 +71,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache ret lr +SYM_FUNC_END(v4wt_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -81,7 +83,7 @@ __flush_whole_cache: * - end - end address (exclusive, page aligned) * - flags - vma_area_struct flags describing address space */ -ENTRY(v4wt_flush_user_cache_range) +SYM_TYPED_FUNC_START(v4wt_flush_user_cache_range) sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT bhs __flush_whole_cache @@ -93,6 +95,7 @@ ENTRY(v4wt_flush_user_cache_range) cmp r0, r1 blo 1b ret lr +SYM_FUNC_END(v4wt_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -104,8 +107,11 @@ ENTRY(v4wt_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(v4wt_coherent_kern_range) - /* FALLTRHOUGH */ +SYM_TYPED_FUNC_START(v4wt_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b v4wt_coherent_user_range +#endif +SYM_FUNC_END(v4wt_coherent_kern_range) /* * coherent_user_range(start, end) @@ -117,7 +123,7 @@ ENTRY(v4wt_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(v4wt_coherent_user_range) +SYM_TYPED_FUNC_START(v4wt_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry add r0, r0, #CACHE_DLINESIZE @@ -125,6 +131,7 @@ ENTRY(v4wt_coherent_user_range) blo 1b mov r0, #0 ret lr +SYM_FUNC_END(v4wt_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -135,11 +142,12 @@ ENTRY(v4wt_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(v4wt_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(v4wt_flush_kern_dcache_area) mov r2, #0 mcr p15, 0, r2, c7, c5, 0 @ invalidate I cache add r1, r0, r1 - /* fallthrough */ + b v4wt_dma_inv_range +SYM_FUNC_END(v4wt_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -167,9 +175,10 @@ v4wt_dma_inv_range: * * - start - virtual start address * - end - virtual end address - */ - .globl v4wt_dma_flush_range - .equ v4wt_dma_flush_range, v4wt_dma_inv_range +*/ +SYM_TYPED_FUNC_START(v4wt_dma_flush_range) + b v4wt_dma_inv_range +SYM_FUNC_END(v4wt_dma_flush_range) /* * dma_unmap_area(start, size, dir) @@ -177,11 +186,12 @@ v4wt_dma_inv_range: * - size - size of region * - dir - DMA direction */ -ENTRY(v4wt_dma_unmap_area) +SYM_TYPED_FUNC_START(v4wt_dma_unmap_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE bne v4wt_dma_inv_range - /* FALLTHROUGH */ + ret lr +SYM_FUNC_END(v4wt_dma_unmap_area) /* * dma_map_area(start, size, dir) @@ -189,15 +199,6 @@ ENTRY(v4wt_dma_unmap_area) * - size - size of region * - dir - DMA direction */ -ENTRY(v4wt_dma_map_area) +SYM_TYPED_FUNC_START(v4wt_dma_map_area) ret lr -ENDPROC(v4wt_dma_unmap_area) -ENDPROC(v4wt_dma_map_area) - - .globl v4wt_flush_kern_cache_louis - .equ v4wt_flush_kern_cache_louis, v4wt_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v4wt +SYM_FUNC_END(v4wt_dma_map_area) diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 44211d8a296f..9f415476e218 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -8,6 +8,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/errno.h> #include <asm/unwind.h> @@ -34,7 +35,7 @@ * r0 - set to 0 * r1 - corrupted */ -ENTRY(v6_flush_icache_all) +SYM_TYPED_FUNC_START(v6_flush_icache_all) mov r0, #0 #ifdef CONFIG_ARM_ERRATA_411920 mrs r1, cpsr @@ -51,7 +52,7 @@ ENTRY(v6_flush_icache_all) mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache #endif ret lr -ENDPROC(v6_flush_icache_all) +SYM_FUNC_END(v6_flush_icache_all) /* * v6_flush_cache_all() @@ -60,7 +61,7 @@ ENDPROC(v6_flush_icache_all) * * It is assumed that: */ -ENTRY(v6_flush_kern_cache_all) +SYM_TYPED_FUNC_START(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate @@ -73,6 +74,7 @@ ENTRY(v6_flush_kern_cache_all) mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif ret lr +SYM_FUNC_END(v6_flush_kern_cache_all) /* * v6_flush_cache_all() @@ -81,8 +83,9 @@ ENTRY(v6_flush_kern_cache_all) * * - mm - mm_struct describing address space */ -ENTRY(v6_flush_user_cache_all) - /*FALLTHROUGH*/ +SYM_TYPED_FUNC_START(v6_flush_user_cache_all) + ret lr +SYM_FUNC_END(v6_flush_user_cache_all) /* * v6_flush_cache_range(start, end, flags) @@ -96,8 +99,9 @@ ENTRY(v6_flush_user_cache_all) * It is assumed that: * - we have a VIPT cache. */ -ENTRY(v6_flush_user_cache_range) +SYM_TYPED_FUNC_START(v6_flush_user_cache_range) ret lr +SYM_FUNC_END(v6_flush_user_cache_range) /* * v6_coherent_kern_range(start,end) @@ -112,8 +116,11 @@ ENTRY(v6_flush_user_cache_range) * It is assumed that: * - the Icache does not read data from the write buffer */ -ENTRY(v6_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(v6_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b v6_coherent_user_range +#endif +SYM_FUNC_END(v6_coherent_kern_range) /* * v6_coherent_user_range(start,end) @@ -128,7 +135,7 @@ ENTRY(v6_coherent_kern_range) * It is assumed that: * - the Icache does not read data from the write buffer */ -ENTRY(v6_coherent_user_range) +SYM_TYPED_FUNC_START(v6_coherent_user_range) UNWIND(.fnstart ) #ifdef HARVARD_CACHE bic r0, r0, #CACHE_LINE_SIZE - 1 @@ -159,8 +166,7 @@ ENTRY(v6_coherent_user_range) mov r0, #-EFAULT ret lr UNWIND(.fnend ) -ENDPROC(v6_coherent_user_range) -ENDPROC(v6_coherent_kern_range) +SYM_FUNC_END(v6_coherent_user_range) /* * v6_flush_kern_dcache_area(void *addr, size_t size) @@ -171,7 +177,7 @@ ENDPROC(v6_coherent_kern_range) * - addr - kernel address * - size - region size */ -ENTRY(v6_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(v6_flush_kern_dcache_area) add r1, r0, r1 bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: @@ -188,7 +194,7 @@ ENTRY(v6_flush_kern_dcache_area) mcr p15, 0, r0, c7, c10, 4 #endif ret lr - +SYM_FUNC_END(v6_flush_kern_dcache_area) /* * v6_dma_inv_range(start,end) @@ -253,7 +259,7 @@ v6_dma_clean_range: * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(v6_dma_flush_range) +SYM_TYPED_FUNC_START(v6_dma_flush_range) bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: #ifdef HARVARD_CACHE @@ -267,6 +273,7 @@ ENTRY(v6_dma_flush_range) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ret lr +SYM_FUNC_END(v6_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -274,12 +281,12 @@ ENTRY(v6_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(v6_dma_map_area) +SYM_TYPED_FUNC_START(v6_dma_map_area) add r1, r1, r0 teq r2, #DMA_FROM_DEVICE beq v6_dma_inv_range b v6_dma_clean_range -ENDPROC(v6_dma_map_area) +SYM_FUNC_END(v6_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -287,17 +294,9 @@ ENDPROC(v6_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(v6_dma_unmap_area) +SYM_TYPED_FUNC_START(v6_dma_unmap_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE bne v6_dma_inv_range ret lr -ENDPROC(v6_dma_unmap_area) - - .globl v6_flush_kern_cache_louis - .equ v6_flush_kern_cache_louis, v6_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v6 +SYM_FUNC_END(v6_dma_unmap_area) diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 127afe2096ba..201ca05436fa 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -9,6 +9,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/errno.h> #include <asm/unwind.h> @@ -80,12 +81,12 @@ ENDPROC(v7_invalidate_l1) * Registers: * r0 - set to 0 */ -ENTRY(v7_flush_icache_all) +SYM_TYPED_FUNC_START(v7_flush_icache_all) mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ret lr -ENDPROC(v7_flush_icache_all) +SYM_FUNC_END(v7_flush_icache_all) /* * v7_flush_dcache_louis() @@ -193,7 +194,7 @@ ENDPROC(v7_flush_dcache_all) * unification in a single instruction. * */ -ENTRY(v7_flush_kern_cache_all) +SYM_TYPED_FUNC_START(v7_flush_kern_cache_all) stmfd sp!, {r4-r6, r9-r10, lr} bl v7_flush_dcache_all mov r0, #0 @@ -201,7 +202,7 @@ ENTRY(v7_flush_kern_cache_all) ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ldmfd sp!, {r4-r6, r9-r10, lr} ret lr -ENDPROC(v7_flush_kern_cache_all) +SYM_FUNC_END(v7_flush_kern_cache_all) /* * v7_flush_kern_cache_louis(void) @@ -209,7 +210,7 @@ ENDPROC(v7_flush_kern_cache_all) * Flush the data cache up to Level of Unification Inner Shareable. * Invalidate the I-cache to the point of unification. */ -ENTRY(v7_flush_kern_cache_louis) +SYM_TYPED_FUNC_START(v7_flush_kern_cache_louis) stmfd sp!, {r4-r6, r9-r10, lr} bl v7_flush_dcache_louis mov r0, #0 @@ -217,7 +218,7 @@ ENTRY(v7_flush_kern_cache_louis) ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ldmfd sp!, {r4-r6, r9-r10, lr} ret lr -ENDPROC(v7_flush_kern_cache_louis) +SYM_FUNC_END(v7_flush_kern_cache_louis) /* * v7_flush_cache_all() @@ -226,8 +227,9 @@ ENDPROC(v7_flush_kern_cache_louis) * * - mm - mm_struct describing address space */ -ENTRY(v7_flush_user_cache_all) - /*FALLTHROUGH*/ +SYM_TYPED_FUNC_START(v7_flush_user_cache_all) + ret lr +SYM_FUNC_END(v7_flush_user_cache_all) /* * v7_flush_cache_range(start, end, flags) @@ -241,10 +243,9 @@ ENTRY(v7_flush_user_cache_all) * It is assumed that: * - we have a VIPT cache. */ -ENTRY(v7_flush_user_cache_range) +SYM_TYPED_FUNC_START(v7_flush_user_cache_range) ret lr -ENDPROC(v7_flush_user_cache_all) -ENDPROC(v7_flush_user_cache_range) +SYM_FUNC_END(v7_flush_user_cache_range) /* * v7_coherent_kern_range(start,end) @@ -259,8 +260,11 @@ ENDPROC(v7_flush_user_cache_range) * It is assumed that: * - the Icache does not read data from the write buffer */ -ENTRY(v7_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(v7_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b v7_coherent_user_range +#endif +SYM_FUNC_END(v7_coherent_kern_range) /* * v7_coherent_user_range(start,end) @@ -275,7 +279,7 @@ ENTRY(v7_coherent_kern_range) * It is assumed that: * - the Icache does not read data from the write buffer */ -ENTRY(v7_coherent_user_range) +SYM_TYPED_FUNC_START(v7_coherent_user_range) UNWIND(.fnstart ) dcache_line_size r2, r3 sub r3, r2, #1 @@ -321,8 +325,7 @@ ENTRY(v7_coherent_user_range) mov r0, #-EFAULT ret lr UNWIND(.fnend ) -ENDPROC(v7_coherent_kern_range) -ENDPROC(v7_coherent_user_range) +SYM_FUNC_END(v7_coherent_user_range) /* * v7_flush_kern_dcache_area(void *addr, size_t size) @@ -333,7 +336,7 @@ ENDPROC(v7_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(v7_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(v7_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 sub r3, r2, #1 @@ -349,7 +352,7 @@ ENTRY(v7_flush_kern_dcache_area) blo 1b dsb st ret lr -ENDPROC(v7_flush_kern_dcache_area) +SYM_FUNC_END(v7_flush_kern_dcache_area) /* * v7_dma_inv_range(start,end) @@ -413,7 +416,7 @@ ENDPROC(v7_dma_clean_range) * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(v7_dma_flush_range) +SYM_TYPED_FUNC_START(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 @@ -428,7 +431,7 @@ ENTRY(v7_dma_flush_range) blo 1b dsb st ret lr -ENDPROC(v7_dma_flush_range) +SYM_FUNC_END(v7_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -436,12 +439,12 @@ ENDPROC(v7_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(v7_dma_map_area) +SYM_TYPED_FUNC_START(v7_dma_map_area) add r1, r1, r0 teq r2, #DMA_FROM_DEVICE beq v7_dma_inv_range b v7_dma_clean_range -ENDPROC(v7_dma_map_area) +SYM_FUNC_END(v7_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -449,34 +452,9 @@ ENDPROC(v7_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(v7_dma_unmap_area) +SYM_TYPED_FUNC_START(v7_dma_unmap_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE bne v7_dma_inv_range ret lr -ENDPROC(v7_dma_unmap_area) - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v7 - - /* The Broadcom Brahma-B15 read-ahead cache requires some modifications - * to the v7_cache_fns, we only override the ones we need - */ -#ifndef CONFIG_CACHE_B15_RAC - globl_equ b15_flush_kern_cache_all, v7_flush_kern_cache_all -#endif - globl_equ b15_flush_icache_all, v7_flush_icache_all - globl_equ b15_flush_kern_cache_louis, v7_flush_kern_cache_louis - globl_equ b15_flush_user_cache_all, v7_flush_user_cache_all - globl_equ b15_flush_user_cache_range, v7_flush_user_cache_range - globl_equ b15_coherent_kern_range, v7_coherent_kern_range - globl_equ b15_coherent_user_range, v7_coherent_user_range - globl_equ b15_flush_kern_dcache_area, v7_flush_kern_dcache_area - - globl_equ b15_dma_map_area, v7_dma_map_area - globl_equ b15_dma_unmap_area, v7_dma_unmap_area - globl_equ b15_dma_flush_range, v7_dma_flush_range - - define_cache_functions b15 +SYM_FUNC_END(v7_dma_unmap_area) diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S index eb60b5e5e2ad..14d719eba729 100644 --- a/arch/arm/mm/cache-v7m.S +++ b/arch/arm/mm/cache-v7m.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/errno.h> #include <asm/unwind.h> @@ -159,10 +160,10 @@ ENDPROC(v7m_invalidate_l1) * Registers: * r0 - set to 0 */ -ENTRY(v7m_flush_icache_all) +SYM_TYPED_FUNC_START(v7m_flush_icache_all) invalidate_icache r0 ret lr -ENDPROC(v7m_flush_icache_all) +SYM_FUNC_END(v7m_flush_icache_all) /* * v7m_flush_dcache_all() @@ -236,13 +237,13 @@ ENDPROC(v7m_flush_dcache_all) * unification in a single instruction. * */ -ENTRY(v7m_flush_kern_cache_all) +SYM_TYPED_FUNC_START(v7m_flush_kern_cache_all) stmfd sp!, {r4-r7, r9-r11, lr} bl v7m_flush_dcache_all invalidate_icache r0 ldmfd sp!, {r4-r7, r9-r11, lr} ret lr -ENDPROC(v7m_flush_kern_cache_all) +SYM_FUNC_END(v7m_flush_kern_cache_all) /* * v7m_flush_cache_all() @@ -251,8 +252,9 @@ ENDPROC(v7m_flush_kern_cache_all) * * - mm - mm_struct describing address space */ -ENTRY(v7m_flush_user_cache_all) - /*FALLTHROUGH*/ +SYM_TYPED_FUNC_START(v7m_flush_user_cache_all) + ret lr +SYM_FUNC_END(v7m_flush_user_cache_all) /* * v7m_flush_cache_range(start, end, flags) @@ -266,10 +268,9 @@ ENTRY(v7m_flush_user_cache_all) * It is assumed that: * - we have a VIPT cache. */ -ENTRY(v7m_flush_user_cache_range) +SYM_TYPED_FUNC_START(v7m_flush_user_cache_range) ret lr -ENDPROC(v7m_flush_user_cache_all) -ENDPROC(v7m_flush_user_cache_range) +SYM_FUNC_END(v7m_flush_user_cache_range) /* * v7m_coherent_kern_range(start,end) @@ -284,8 +285,11 @@ ENDPROC(v7m_flush_user_cache_range) * It is assumed that: * - the Icache does not read data from the write buffer */ -ENTRY(v7m_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(v7m_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b v7m_coherent_user_range +#endif +SYM_FUNC_END(v7m_coherent_kern_range) /* * v7m_coherent_user_range(start,end) @@ -300,7 +304,7 @@ ENTRY(v7m_coherent_kern_range) * It is assumed that: * - the Icache does not read data from the write buffer */ -ENTRY(v7m_coherent_user_range) +SYM_TYPED_FUNC_START(v7m_coherent_user_range) UNWIND(.fnstart ) dcache_line_size r2, r3 sub r3, r2, #1 @@ -328,8 +332,7 @@ ENTRY(v7m_coherent_user_range) isb ret lr UNWIND(.fnend ) -ENDPROC(v7m_coherent_kern_range) -ENDPROC(v7m_coherent_user_range) +SYM_FUNC_END(v7m_coherent_user_range) /* * v7m_flush_kern_dcache_area(void *addr, size_t size) @@ -340,7 +343,7 @@ ENDPROC(v7m_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(v7m_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(v7m_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 sub r3, r2, #1 @@ -352,7 +355,7 @@ ENTRY(v7m_flush_kern_dcache_area) blo 1b dsb st ret lr -ENDPROC(v7m_flush_kern_dcache_area) +SYM_FUNC_END(v7m_flush_kern_dcache_area) /* * v7m_dma_inv_range(start,end) @@ -408,7 +411,7 @@ ENDPROC(v7m_dma_clean_range) * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(v7m_dma_flush_range) +SYM_TYPED_FUNC_START(v7m_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 @@ -419,7 +422,7 @@ ENTRY(v7m_dma_flush_range) blo 1b dsb st ret lr -ENDPROC(v7m_dma_flush_range) +SYM_FUNC_END(v7m_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -427,12 +430,12 @@ ENDPROC(v7m_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(v7m_dma_map_area) +SYM_TYPED_FUNC_START(v7m_dma_map_area) add r1, r1, r0 teq r2, #DMA_FROM_DEVICE beq v7m_dma_inv_range b v7m_dma_clean_range -ENDPROC(v7m_dma_map_area) +SYM_FUNC_END(v7m_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -440,17 +443,9 @@ ENDPROC(v7m_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(v7m_dma_unmap_area) +SYM_TYPED_FUNC_START(v7m_dma_unmap_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE bne v7m_dma_inv_range ret lr -ENDPROC(v7m_dma_unmap_area) - - .globl v7m_flush_kern_cache_louis - .equ v7m_flush_kern_cache_louis, v7m_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v7m +SYM_FUNC_END(v7m_dma_unmap_area) diff --git a/arch/arm/mm/cache.c b/arch/arm/mm/cache.c new file mode 100644 index 000000000000..e6fbc599c9ed --- /dev/null +++ b/arch/arm/mm/cache.c @@ -0,0 +1,663 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file defines C prototypes for the low-level cache assembly functions + * and populates a vtable for each selected ARM CPU cache type. + */ + +#include <linux/types.h> +#include <asm/cacheflush.h> + +#ifdef CONFIG_CPU_CACHE_V4 +void v4_flush_icache_all(void); +void v4_flush_kern_cache_all(void); +void v4_flush_user_cache_all(void); +void v4_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void v4_coherent_kern_range(unsigned long, unsigned long); +int v4_coherent_user_range(unsigned long, unsigned long); +void v4_flush_kern_dcache_area(void *, size_t); +void v4_dma_map_area(const void *, size_t, int); +void v4_dma_unmap_area(const void *, size_t, int); +void v4_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns v4_cache_fns __initconst = { + .flush_icache_all = v4_flush_icache_all, + .flush_kern_all = v4_flush_kern_cache_all, + .flush_kern_louis = v4_flush_kern_cache_all, + .flush_user_all = v4_flush_user_cache_all, + .flush_user_range = v4_flush_user_cache_range, + .coherent_kern_range = v4_coherent_kern_range, + .coherent_user_range = v4_coherent_user_range, + .flush_kern_dcache_area = v4_flush_kern_dcache_area, + .dma_map_area = v4_dma_map_area, + .dma_unmap_area = v4_dma_unmap_area, + .dma_flush_range = v4_dma_flush_range, +}; +#endif + +/* V4 write-back cache "V4WB" */ +#ifdef CONFIG_CPU_CACHE_V4WB +void v4wb_flush_icache_all(void); +void v4wb_flush_kern_cache_all(void); +void v4wb_flush_user_cache_all(void); +void v4wb_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void v4wb_coherent_kern_range(unsigned long, unsigned long); +int v4wb_coherent_user_range(unsigned long, unsigned long); +void v4wb_flush_kern_dcache_area(void *, size_t); +void v4wb_dma_map_area(const void *, size_t, int); +void v4wb_dma_unmap_area(const void *, size_t, int); +void v4wb_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns v4wb_cache_fns __initconst = { + .flush_icache_all = v4wb_flush_icache_all, + .flush_kern_all = v4wb_flush_kern_cache_all, + .flush_kern_louis = v4wb_flush_kern_cache_all, + .flush_user_all = v4wb_flush_user_cache_all, + .flush_user_range = v4wb_flush_user_cache_range, + .coherent_kern_range = v4wb_coherent_kern_range, + .coherent_user_range = v4wb_coherent_user_range, + .flush_kern_dcache_area = v4wb_flush_kern_dcache_area, + .dma_map_area = v4wb_dma_map_area, + .dma_unmap_area = v4wb_dma_unmap_area, + .dma_flush_range = v4wb_dma_flush_range, +}; +#endif + +/* V4 write-through cache "V4WT" */ +#ifdef CONFIG_CPU_CACHE_V4WT +void v4wt_flush_icache_all(void); +void v4wt_flush_kern_cache_all(void); +void v4wt_flush_user_cache_all(void); +void v4wt_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void v4wt_coherent_kern_range(unsigned long, unsigned long); +int v4wt_coherent_user_range(unsigned long, unsigned long); +void v4wt_flush_kern_dcache_area(void *, size_t); +void v4wt_dma_map_area(const void *, size_t, int); +void v4wt_dma_unmap_area(const void *, size_t, int); +void v4wt_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns v4wt_cache_fns __initconst = { + .flush_icache_all = v4wt_flush_icache_all, + .flush_kern_all = v4wt_flush_kern_cache_all, + .flush_kern_louis = v4wt_flush_kern_cache_all, + .flush_user_all = v4wt_flush_user_cache_all, + .flush_user_range = v4wt_flush_user_cache_range, + .coherent_kern_range = v4wt_coherent_kern_range, + .coherent_user_range = v4wt_coherent_user_range, + .flush_kern_dcache_area = v4wt_flush_kern_dcache_area, + .dma_map_area = v4wt_dma_map_area, + .dma_unmap_area = v4wt_dma_unmap_area, + .dma_flush_range = v4wt_dma_flush_range, +}; +#endif + +/* Faraday FA526 cache */ +#ifdef CONFIG_CPU_CACHE_FA +void fa_flush_icache_all(void); +void fa_flush_kern_cache_all(void); +void fa_flush_user_cache_all(void); +void fa_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void fa_coherent_kern_range(unsigned long, unsigned long); +int fa_coherent_user_range(unsigned long, unsigned long); +void fa_flush_kern_dcache_area(void *, size_t); +void fa_dma_map_area(const void *, size_t, int); +void fa_dma_unmap_area(const void *, size_t, int); +void fa_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns fa_cache_fns __initconst = { + .flush_icache_all = fa_flush_icache_all, + .flush_kern_all = fa_flush_kern_cache_all, + .flush_kern_louis = fa_flush_kern_cache_all, + .flush_user_all = fa_flush_user_cache_all, + .flush_user_range = fa_flush_user_cache_range, + .coherent_kern_range = fa_coherent_kern_range, + .coherent_user_range = fa_coherent_user_range, + .flush_kern_dcache_area = fa_flush_kern_dcache_area, + .dma_map_area = fa_dma_map_area, + .dma_unmap_area = fa_dma_unmap_area, + .dma_flush_range = fa_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_CACHE_V6 +void v6_flush_icache_all(void); +void v6_flush_kern_cache_all(void); +void v6_flush_user_cache_all(void); +void v6_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void v6_coherent_kern_range(unsigned long, unsigned long); +int v6_coherent_user_range(unsigned long, unsigned long); +void v6_flush_kern_dcache_area(void *, size_t); +void v6_dma_map_area(const void *, size_t, int); +void v6_dma_unmap_area(const void *, size_t, int); +void v6_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns v6_cache_fns __initconst = { + .flush_icache_all = v6_flush_icache_all, + .flush_kern_all = v6_flush_kern_cache_all, + .flush_kern_louis = v6_flush_kern_cache_all, + .flush_user_all = v6_flush_user_cache_all, + .flush_user_range = v6_flush_user_cache_range, + .coherent_kern_range = v6_coherent_kern_range, + .coherent_user_range = v6_coherent_user_range, + .flush_kern_dcache_area = v6_flush_kern_dcache_area, + .dma_map_area = v6_dma_map_area, + .dma_unmap_area = v6_dma_unmap_area, + .dma_flush_range = v6_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_CACHE_V7 +void v7_flush_icache_all(void); +void v7_flush_kern_cache_all(void); +void v7_flush_kern_cache_louis(void); +void v7_flush_user_cache_all(void); +void v7_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void v7_coherent_kern_range(unsigned long, unsigned long); +int v7_coherent_user_range(unsigned long, unsigned long); +void v7_flush_kern_dcache_area(void *, size_t); +void v7_dma_map_area(const void *, size_t, int); +void v7_dma_unmap_area(const void *, size_t, int); +void v7_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns v7_cache_fns __initconst = { + .flush_icache_all = v7_flush_icache_all, + .flush_kern_all = v7_flush_kern_cache_all, + .flush_kern_louis = v7_flush_kern_cache_louis, + .flush_user_all = v7_flush_user_cache_all, + .flush_user_range = v7_flush_user_cache_range, + .coherent_kern_range = v7_coherent_kern_range, + .coherent_user_range = v7_coherent_user_range, + .flush_kern_dcache_area = v7_flush_kern_dcache_area, + .dma_map_area = v7_dma_map_area, + .dma_unmap_area = v7_dma_unmap_area, + .dma_flush_range = v7_dma_flush_range, +}; + +/* Special quirky cache flush function for Broadcom B15 v7 caches */ +void b15_flush_kern_cache_all(void); + +struct cpu_cache_fns b15_cache_fns __initconst = { + .flush_icache_all = v7_flush_icache_all, +#ifdef CONFIG_CACHE_B15_RAC + .flush_kern_all = b15_flush_kern_cache_all, +#else + .flush_kern_all = v7_flush_kern_cache_all, +#endif + .flush_kern_louis = v7_flush_kern_cache_louis, + .flush_user_all = v7_flush_user_cache_all, + .flush_user_range = v7_flush_user_cache_range, + .coherent_kern_range = v7_coherent_kern_range, + .coherent_user_range = v7_coherent_user_range, + .flush_kern_dcache_area = v7_flush_kern_dcache_area, + .dma_map_area = v7_dma_map_area, + .dma_unmap_area = v7_dma_unmap_area, + .dma_flush_range = v7_dma_flush_range, +}; +#endif + +/* The NOP cache is just a set of dummy stubs that by definition does nothing */ +#ifdef CONFIG_CPU_CACHE_NOP +void nop_flush_icache_all(void); +void nop_flush_kern_cache_all(void); +void nop_flush_user_cache_all(void); +void nop_flush_user_cache_range(unsigned long start, unsigned long end, unsigned int flags); +void nop_coherent_kern_range(unsigned long start, unsigned long end); +int nop_coherent_user_range(unsigned long, unsigned long); +void nop_flush_kern_dcache_area(void *kaddr, size_t size); +void nop_dma_map_area(const void *start, size_t size, int flags); +void nop_dma_unmap_area(const void *start, size_t size, int flags); +void nop_dma_flush_range(const void *start, const void *end); + +struct cpu_cache_fns nop_cache_fns __initconst = { + .flush_icache_all = nop_flush_icache_all, + .flush_kern_all = nop_flush_kern_cache_all, + .flush_kern_louis = nop_flush_kern_cache_all, + .flush_user_all = nop_flush_user_cache_all, + .flush_user_range = nop_flush_user_cache_range, + .coherent_kern_range = nop_coherent_kern_range, + .coherent_user_range = nop_coherent_user_range, + .flush_kern_dcache_area = nop_flush_kern_dcache_area, + .dma_map_area = nop_dma_map_area, + .dma_unmap_area = nop_dma_unmap_area, + .dma_flush_range = nop_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_CACHE_V7M +void v7m_flush_icache_all(void); +void v7m_flush_kern_cache_all(void); +void v7m_flush_user_cache_all(void); +void v7m_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void v7m_coherent_kern_range(unsigned long, unsigned long); +int v7m_coherent_user_range(unsigned long, unsigned long); +void v7m_flush_kern_dcache_area(void *, size_t); +void v7m_dma_map_area(const void *, size_t, int); +void v7m_dma_unmap_area(const void *, size_t, int); +void v7m_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns v7m_cache_fns __initconst = { + .flush_icache_all = v7m_flush_icache_all, + .flush_kern_all = v7m_flush_kern_cache_all, + .flush_kern_louis = v7m_flush_kern_cache_all, + .flush_user_all = v7m_flush_user_cache_all, + .flush_user_range = v7m_flush_user_cache_range, + .coherent_kern_range = v7m_coherent_kern_range, + .coherent_user_range = v7m_coherent_user_range, + .flush_kern_dcache_area = v7m_flush_kern_dcache_area, + .dma_map_area = v7m_dma_map_area, + .dma_unmap_area = v7m_dma_unmap_area, + .dma_flush_range = v7m_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM1020 +void arm1020_flush_icache_all(void); +void arm1020_flush_kern_cache_all(void); +void arm1020_flush_user_cache_all(void); +void arm1020_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm1020_coherent_kern_range(unsigned long, unsigned long); +int arm1020_coherent_user_range(unsigned long, unsigned long); +void arm1020_flush_kern_dcache_area(void *, size_t); +void arm1020_dma_map_area(const void *, size_t, int); +void arm1020_dma_unmap_area(const void *, size_t, int); +void arm1020_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm1020_cache_fns __initconst = { + .flush_icache_all = arm1020_flush_icache_all, + .flush_kern_all = arm1020_flush_kern_cache_all, + .flush_kern_louis = arm1020_flush_kern_cache_all, + .flush_user_all = arm1020_flush_user_cache_all, + .flush_user_range = arm1020_flush_user_cache_range, + .coherent_kern_range = arm1020_coherent_kern_range, + .coherent_user_range = arm1020_coherent_user_range, + .flush_kern_dcache_area = arm1020_flush_kern_dcache_area, + .dma_map_area = arm1020_dma_map_area, + .dma_unmap_area = arm1020_dma_unmap_area, + .dma_flush_range = arm1020_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM1020E +void arm1020e_flush_icache_all(void); +void arm1020e_flush_kern_cache_all(void); +void arm1020e_flush_user_cache_all(void); +void arm1020e_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm1020e_coherent_kern_range(unsigned long, unsigned long); +int arm1020e_coherent_user_range(unsigned long, unsigned long); +void arm1020e_flush_kern_dcache_area(void *, size_t); +void arm1020e_dma_map_area(const void *, size_t, int); +void arm1020e_dma_unmap_area(const void *, size_t, int); +void arm1020e_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm1020e_cache_fns __initconst = { + .flush_icache_all = arm1020e_flush_icache_all, + .flush_kern_all = arm1020e_flush_kern_cache_all, + .flush_kern_louis = arm1020e_flush_kern_cache_all, + .flush_user_all = arm1020e_flush_user_cache_all, + .flush_user_range = arm1020e_flush_user_cache_range, + .coherent_kern_range = arm1020e_coherent_kern_range, + .coherent_user_range = arm1020e_coherent_user_range, + .flush_kern_dcache_area = arm1020e_flush_kern_dcache_area, + .dma_map_area = arm1020e_dma_map_area, + .dma_unmap_area = arm1020e_dma_unmap_area, + .dma_flush_range = arm1020e_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM1022 +void arm1022_flush_icache_all(void); +void arm1022_flush_kern_cache_all(void); +void arm1022_flush_user_cache_all(void); +void arm1022_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm1022_coherent_kern_range(unsigned long, unsigned long); +int arm1022_coherent_user_range(unsigned long, unsigned long); +void arm1022_flush_kern_dcache_area(void *, size_t); +void arm1022_dma_map_area(const void *, size_t, int); +void arm1022_dma_unmap_area(const void *, size_t, int); +void arm1022_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm1022_cache_fns __initconst = { + .flush_icache_all = arm1022_flush_icache_all, + .flush_kern_all = arm1022_flush_kern_cache_all, + .flush_kern_louis = arm1022_flush_kern_cache_all, + .flush_user_all = arm1022_flush_user_cache_all, + .flush_user_range = arm1022_flush_user_cache_range, + .coherent_kern_range = arm1022_coherent_kern_range, + .coherent_user_range = arm1022_coherent_user_range, + .flush_kern_dcache_area = arm1022_flush_kern_dcache_area, + .dma_map_area = arm1022_dma_map_area, + .dma_unmap_area = arm1022_dma_unmap_area, + .dma_flush_range = arm1022_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM1026 +void arm1026_flush_icache_all(void); +void arm1026_flush_kern_cache_all(void); +void arm1026_flush_user_cache_all(void); +void arm1026_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm1026_coherent_kern_range(unsigned long, unsigned long); +int arm1026_coherent_user_range(unsigned long, unsigned long); +void arm1026_flush_kern_dcache_area(void *, size_t); +void arm1026_dma_map_area(const void *, size_t, int); +void arm1026_dma_unmap_area(const void *, size_t, int); +void arm1026_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm1026_cache_fns __initconst = { + .flush_icache_all = arm1026_flush_icache_all, + .flush_kern_all = arm1026_flush_kern_cache_all, + .flush_kern_louis = arm1026_flush_kern_cache_all, + .flush_user_all = arm1026_flush_user_cache_all, + .flush_user_range = arm1026_flush_user_cache_range, + .coherent_kern_range = arm1026_coherent_kern_range, + .coherent_user_range = arm1026_coherent_user_range, + .flush_kern_dcache_area = arm1026_flush_kern_dcache_area, + .dma_map_area = arm1026_dma_map_area, + .dma_unmap_area = arm1026_dma_unmap_area, + .dma_flush_range = arm1026_dma_flush_range, +}; +#endif + +#if defined(CONFIG_CPU_ARM920T) && !defined(CONFIG_CPU_DCACHE_WRITETHROUGH) +void arm920_flush_icache_all(void); +void arm920_flush_kern_cache_all(void); +void arm920_flush_user_cache_all(void); +void arm920_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm920_coherent_kern_range(unsigned long, unsigned long); +int arm920_coherent_user_range(unsigned long, unsigned long); +void arm920_flush_kern_dcache_area(void *, size_t); +void arm920_dma_map_area(const void *, size_t, int); +void arm920_dma_unmap_area(const void *, size_t, int); +void arm920_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm920_cache_fns __initconst = { + .flush_icache_all = arm920_flush_icache_all, + .flush_kern_all = arm920_flush_kern_cache_all, + .flush_kern_louis = arm920_flush_kern_cache_all, + .flush_user_all = arm920_flush_user_cache_all, + .flush_user_range = arm920_flush_user_cache_range, + .coherent_kern_range = arm920_coherent_kern_range, + .coherent_user_range = arm920_coherent_user_range, + .flush_kern_dcache_area = arm920_flush_kern_dcache_area, + .dma_map_area = arm920_dma_map_area, + .dma_unmap_area = arm920_dma_unmap_area, + .dma_flush_range = arm920_dma_flush_range, +}; +#endif + +#if defined(CONFIG_CPU_ARM922T) && !defined(CONFIG_CPU_DCACHE_WRITETHROUGH) +void arm922_flush_icache_all(void); +void arm922_flush_kern_cache_all(void); +void arm922_flush_user_cache_all(void); +void arm922_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm922_coherent_kern_range(unsigned long, unsigned long); +int arm922_coherent_user_range(unsigned long, unsigned long); +void arm922_flush_kern_dcache_area(void *, size_t); +void arm922_dma_map_area(const void *, size_t, int); +void arm922_dma_unmap_area(const void *, size_t, int); +void arm922_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm922_cache_fns __initconst = { + .flush_icache_all = arm922_flush_icache_all, + .flush_kern_all = arm922_flush_kern_cache_all, + .flush_kern_louis = arm922_flush_kern_cache_all, + .flush_user_all = arm922_flush_user_cache_all, + .flush_user_range = arm922_flush_user_cache_range, + .coherent_kern_range = arm922_coherent_kern_range, + .coherent_user_range = arm922_coherent_user_range, + .flush_kern_dcache_area = arm922_flush_kern_dcache_area, + .dma_map_area = arm922_dma_map_area, + .dma_unmap_area = arm922_dma_unmap_area, + .dma_flush_range = arm922_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM925T +void arm925_flush_icache_all(void); +void arm925_flush_kern_cache_all(void); +void arm925_flush_user_cache_all(void); +void arm925_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm925_coherent_kern_range(unsigned long, unsigned long); +int arm925_coherent_user_range(unsigned long, unsigned long); +void arm925_flush_kern_dcache_area(void *, size_t); +void arm925_dma_map_area(const void *, size_t, int); +void arm925_dma_unmap_area(const void *, size_t, int); +void arm925_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm925_cache_fns __initconst = { + .flush_icache_all = arm925_flush_icache_all, + .flush_kern_all = arm925_flush_kern_cache_all, + .flush_kern_louis = arm925_flush_kern_cache_all, + .flush_user_all = arm925_flush_user_cache_all, + .flush_user_range = arm925_flush_user_cache_range, + .coherent_kern_range = arm925_coherent_kern_range, + .coherent_user_range = arm925_coherent_user_range, + .flush_kern_dcache_area = arm925_flush_kern_dcache_area, + .dma_map_area = arm925_dma_map_area, + .dma_unmap_area = arm925_dma_unmap_area, + .dma_flush_range = arm925_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM926T +void arm926_flush_icache_all(void); +void arm926_flush_kern_cache_all(void); +void arm926_flush_user_cache_all(void); +void arm926_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm926_coherent_kern_range(unsigned long, unsigned long); +int arm926_coherent_user_range(unsigned long, unsigned long); +void arm926_flush_kern_dcache_area(void *, size_t); +void arm926_dma_map_area(const void *, size_t, int); +void arm926_dma_unmap_area(const void *, size_t, int); +void arm926_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm926_cache_fns __initconst = { + .flush_icache_all = arm926_flush_icache_all, + .flush_kern_all = arm926_flush_kern_cache_all, + .flush_kern_louis = arm926_flush_kern_cache_all, + .flush_user_all = arm926_flush_user_cache_all, + .flush_user_range = arm926_flush_user_cache_range, + .coherent_kern_range = arm926_coherent_kern_range, + .coherent_user_range = arm926_coherent_user_range, + .flush_kern_dcache_area = arm926_flush_kern_dcache_area, + .dma_map_area = arm926_dma_map_area, + .dma_unmap_area = arm926_dma_unmap_area, + .dma_flush_range = arm926_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM940T +void arm940_flush_icache_all(void); +void arm940_flush_kern_cache_all(void); +void arm940_flush_user_cache_all(void); +void arm940_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm940_coherent_kern_range(unsigned long, unsigned long); +int arm940_coherent_user_range(unsigned long, unsigned long); +void arm940_flush_kern_dcache_area(void *, size_t); +void arm940_dma_map_area(const void *, size_t, int); +void arm940_dma_unmap_area(const void *, size_t, int); +void arm940_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm940_cache_fns __initconst = { + .flush_icache_all = arm940_flush_icache_all, + .flush_kern_all = arm940_flush_kern_cache_all, + .flush_kern_louis = arm940_flush_kern_cache_all, + .flush_user_all = arm940_flush_user_cache_all, + .flush_user_range = arm940_flush_user_cache_range, + .coherent_kern_range = arm940_coherent_kern_range, + .coherent_user_range = arm940_coherent_user_range, + .flush_kern_dcache_area = arm940_flush_kern_dcache_area, + .dma_map_area = arm940_dma_map_area, + .dma_unmap_area = arm940_dma_unmap_area, + .dma_flush_range = arm940_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_ARM946E +void arm946_flush_icache_all(void); +void arm946_flush_kern_cache_all(void); +void arm946_flush_user_cache_all(void); +void arm946_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void arm946_coherent_kern_range(unsigned long, unsigned long); +int arm946_coherent_user_range(unsigned long, unsigned long); +void arm946_flush_kern_dcache_area(void *, size_t); +void arm946_dma_map_area(const void *, size_t, int); +void arm946_dma_unmap_area(const void *, size_t, int); +void arm946_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns arm946_cache_fns __initconst = { + .flush_icache_all = arm946_flush_icache_all, + .flush_kern_all = arm946_flush_kern_cache_all, + .flush_kern_louis = arm946_flush_kern_cache_all, + .flush_user_all = arm946_flush_user_cache_all, + .flush_user_range = arm946_flush_user_cache_range, + .coherent_kern_range = arm946_coherent_kern_range, + .coherent_user_range = arm946_coherent_user_range, + .flush_kern_dcache_area = arm946_flush_kern_dcache_area, + .dma_map_area = arm946_dma_map_area, + .dma_unmap_area = arm946_dma_unmap_area, + .dma_flush_range = arm946_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_XSCALE +void xscale_flush_icache_all(void); +void xscale_flush_kern_cache_all(void); +void xscale_flush_user_cache_all(void); +void xscale_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void xscale_coherent_kern_range(unsigned long, unsigned long); +int xscale_coherent_user_range(unsigned long, unsigned long); +void xscale_flush_kern_dcache_area(void *, size_t); +void xscale_dma_map_area(const void *, size_t, int); +void xscale_dma_unmap_area(const void *, size_t, int); +void xscale_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns xscale_cache_fns __initconst = { + .flush_icache_all = xscale_flush_icache_all, + .flush_kern_all = xscale_flush_kern_cache_all, + .flush_kern_louis = xscale_flush_kern_cache_all, + .flush_user_all = xscale_flush_user_cache_all, + .flush_user_range = xscale_flush_user_cache_range, + .coherent_kern_range = xscale_coherent_kern_range, + .coherent_user_range = xscale_coherent_user_range, + .flush_kern_dcache_area = xscale_flush_kern_dcache_area, + .dma_map_area = xscale_dma_map_area, + .dma_unmap_area = xscale_dma_unmap_area, + .dma_flush_range = xscale_dma_flush_range, +}; + +/* The 80200 A0 and A1 need a special quirk for dma_map_area() */ +void xscale_80200_A0_A1_dma_map_area(const void *, size_t, int); + +struct cpu_cache_fns xscale_80200_A0_A1_cache_fns __initconst = { + .flush_icache_all = xscale_flush_icache_all, + .flush_kern_all = xscale_flush_kern_cache_all, + .flush_kern_louis = xscale_flush_kern_cache_all, + .flush_user_all = xscale_flush_user_cache_all, + .flush_user_range = xscale_flush_user_cache_range, + .coherent_kern_range = xscale_coherent_kern_range, + .coherent_user_range = xscale_coherent_user_range, + .flush_kern_dcache_area = xscale_flush_kern_dcache_area, + .dma_map_area = xscale_80200_A0_A1_dma_map_area, + .dma_unmap_area = xscale_dma_unmap_area, + .dma_flush_range = xscale_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_XSC3 +void xsc3_flush_icache_all(void); +void xsc3_flush_kern_cache_all(void); +void xsc3_flush_user_cache_all(void); +void xsc3_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void xsc3_coherent_kern_range(unsigned long, unsigned long); +int xsc3_coherent_user_range(unsigned long, unsigned long); +void xsc3_flush_kern_dcache_area(void *, size_t); +void xsc3_dma_map_area(const void *, size_t, int); +void xsc3_dma_unmap_area(const void *, size_t, int); +void xsc3_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns xsc3_cache_fns __initconst = { + .flush_icache_all = xsc3_flush_icache_all, + .flush_kern_all = xsc3_flush_kern_cache_all, + .flush_kern_louis = xsc3_flush_kern_cache_all, + .flush_user_all = xsc3_flush_user_cache_all, + .flush_user_range = xsc3_flush_user_cache_range, + .coherent_kern_range = xsc3_coherent_kern_range, + .coherent_user_range = xsc3_coherent_user_range, + .flush_kern_dcache_area = xsc3_flush_kern_dcache_area, + .dma_map_area = xsc3_dma_map_area, + .dma_unmap_area = xsc3_dma_unmap_area, + .dma_flush_range = xsc3_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_MOHAWK +void mohawk_flush_icache_all(void); +void mohawk_flush_kern_cache_all(void); +void mohawk_flush_user_cache_all(void); +void mohawk_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void mohawk_coherent_kern_range(unsigned long, unsigned long); +int mohawk_coherent_user_range(unsigned long, unsigned long); +void mohawk_flush_kern_dcache_area(void *, size_t); +void mohawk_dma_map_area(const void *, size_t, int); +void mohawk_dma_unmap_area(const void *, size_t, int); +void mohawk_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns mohawk_cache_fns __initconst = { + .flush_icache_all = mohawk_flush_icache_all, + .flush_kern_all = mohawk_flush_kern_cache_all, + .flush_kern_louis = mohawk_flush_kern_cache_all, + .flush_user_all = mohawk_flush_user_cache_all, + .flush_user_range = mohawk_flush_user_cache_range, + .coherent_kern_range = mohawk_coherent_kern_range, + .coherent_user_range = mohawk_coherent_user_range, + .flush_kern_dcache_area = mohawk_flush_kern_dcache_area, + .dma_map_area = mohawk_dma_map_area, + .dma_unmap_area = mohawk_dma_unmap_area, + .dma_flush_range = mohawk_dma_flush_range, +}; +#endif + +#ifdef CONFIG_CPU_FEROCEON +void feroceon_flush_icache_all(void); +void feroceon_flush_kern_cache_all(void); +void feroceon_flush_user_cache_all(void); +void feroceon_flush_user_cache_range(unsigned long, unsigned long, unsigned int); +void feroceon_coherent_kern_range(unsigned long, unsigned long); +int feroceon_coherent_user_range(unsigned long, unsigned long); +void feroceon_flush_kern_dcache_area(void *, size_t); +void feroceon_dma_map_area(const void *, size_t, int); +void feroceon_dma_unmap_area(const void *, size_t, int); +void feroceon_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns feroceon_cache_fns __initconst = { + .flush_icache_all = feroceon_flush_icache_all, + .flush_kern_all = feroceon_flush_kern_cache_all, + .flush_kern_louis = feroceon_flush_kern_cache_all, + .flush_user_all = feroceon_flush_user_cache_all, + .flush_user_range = feroceon_flush_user_cache_range, + .coherent_kern_range = feroceon_coherent_kern_range, + .coherent_user_range = feroceon_coherent_user_range, + .flush_kern_dcache_area = feroceon_flush_kern_dcache_area, + .dma_map_area = feroceon_dma_map_area, + .dma_unmap_area = feroceon_dma_unmap_area, + .dma_flush_range = feroceon_dma_flush_range, +}; + +void feroceon_range_flush_kern_dcache_area(void *, size_t); +void feroceon_range_dma_map_area(const void *, size_t, int); +void feroceon_range_dma_flush_range(const void *, const void *); + +struct cpu_cache_fns feroceon_range_cache_fns __initconst = { + .flush_icache_all = feroceon_flush_icache_all, + .flush_kern_all = feroceon_flush_kern_cache_all, + .flush_kern_louis = feroceon_flush_kern_cache_all, + .flush_user_all = feroceon_flush_user_cache_all, + .flush_user_range = feroceon_flush_user_cache_range, + .coherent_kern_range = feroceon_coherent_kern_range, + .coherent_user_range = feroceon_coherent_user_range, + .flush_kern_dcache_area = feroceon_range_flush_kern_dcache_area, + .dma_map_area = feroceon_range_dma_map_area, + .dma_unmap_area = feroceon_dma_unmap_area, + .dma_flush_range = feroceon_range_dma_flush_range, +}; +#endif diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c index b94850b57995..fecac107fd0d 100644 --- a/arch/arm/mm/dma-mapping-nommu.c +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -33,14 +33,13 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, } } -void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, - bool coherent) +void arch_setup_dma_ops(struct device *dev, bool coherent) { if (IS_ENABLED(CONFIG_CPU_V7M)) { /* * Cache support for v7m is optional, so can be treated as * coherent if no cache has been detected. Note that it is not - * enough to check if MPU is in use or not since in absense of + * enough to check if MPU is in use or not since in absence of * MPU system memory map is used. */ dev->dma_coherent = cacheid ? coherent : true; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f68db05eba29..88c2d68a69c9 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1532,7 +1532,7 @@ static const struct dma_map_ops iommu_ops = { /** * arm_iommu_create_mapping - * @bus: pointer to the bus holding the client device (for IOMMU calls) + * @dev: pointer to the client device (for IOMMU calls) * @base: start address of the valid IO address space * @size: maximum size of the valid IO address space * @@ -1544,7 +1544,7 @@ static const struct dma_map_ops iommu_ops = { * arm_iommu_attach_device function. */ struct dma_iommu_mapping * -arm_iommu_create_mapping(const struct bus_type *bus, dma_addr_t base, u64 size) +arm_iommu_create_mapping(struct device *dev, dma_addr_t base, u64 size) { unsigned int bits = size >> PAGE_SHIFT; unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long); @@ -1585,9 +1585,11 @@ arm_iommu_create_mapping(const struct bus_type *bus, dma_addr_t base, u64 size) spin_lock_init(&mapping->lock); - mapping->domain = iommu_domain_alloc(bus); - if (!mapping->domain) + mapping->domain = iommu_paging_domain_alloc(dev); + if (IS_ERR(mapping->domain)) { + err = PTR_ERR(mapping->domain); goto err4; + } kref_init(&mapping->kref); return mapping; @@ -1709,12 +1711,16 @@ void arm_iommu_detach_device(struct device *dev) } EXPORT_SYMBOL_GPL(arm_iommu_detach_device); -static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size, - bool coherent) +static void arm_setup_iommu_dma_ops(struct device *dev) { struct dma_iommu_mapping *mapping; + u64 dma_base = 0, size = 1ULL << 32; - mapping = arm_iommu_create_mapping(dev->bus, dma_base, size); + if (dev->dma_range_map) { + dma_base = dma_range_map_min(dev->dma_range_map); + size = dma_range_map_max(dev->dma_range_map) - dma_base; + } + mapping = arm_iommu_create_mapping(dev, dma_base, size); if (IS_ERR(mapping)) { pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n", size, dev_name(dev)); @@ -1744,8 +1750,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) #else -static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size, - bool coherent) +static void arm_setup_iommu_dma_ops(struct device *dev) { } @@ -1753,8 +1758,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) { } #endif /* CONFIG_ARM_DMA_USE_IOMMU */ -void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, - bool coherent) +void arch_setup_dma_ops(struct device *dev, bool coherent) { /* * Due to legacy code that sets the ->dma_coherent flag from a bus @@ -1774,7 +1778,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, return; if (device_iommu_mapped(dev)) - arm_setup_iommu_dma_ops(dev, dma_base, size, coherent); + arm_setup_iommu_dma_ops(dev); xen_setup_dma_ops(dev); dev->archdata.dma_ops_setup = true; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 2286c2ea60ec..39fd5df73317 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -61,32 +61,8 @@ static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address, return ret; } -#if USE_SPLIT_PTE_PTLOCKS -/* - * If we are using split PTE locks, then we need to take the page - * lock here. Otherwise we are using shared mm->page_table_lock - * which is already locked, thus cannot take it. - */ -static inline void do_pte_lock(spinlock_t *ptl) -{ - /* - * Use nested version here to indicate that we are already - * holding one similar spinlock. - */ - spin_lock_nested(ptl, SINGLE_DEPTH_NESTING); -} - -static inline void do_pte_unlock(spinlock_t *ptl) -{ - spin_unlock(ptl); -} -#else /* !USE_SPLIT_PTE_PTLOCKS */ -static inline void do_pte_lock(spinlock_t *ptl) {} -static inline void do_pte_unlock(spinlock_t *ptl) {} -#endif /* USE_SPLIT_PTE_PTLOCKS */ - static int adjust_pte(struct vm_area_struct *vma, unsigned long address, - unsigned long pfn) + unsigned long pfn, bool need_lock) { spinlock_t *ptl; pgd_t *pgd; @@ -94,6 +70,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, pud_t *pud; pmd_t *pmd; pte_t *pte; + pmd_t pmdval; int ret; pgd = pgd_offset(vma->vm_mm, address); @@ -112,20 +89,32 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, if (pmd_none_or_clear_bad(pmd)) return 0; +again: /* * This is called while another page table is mapped, so we * must use the nested version. This also means we need to * open-code the spin-locking. */ - pte = pte_offset_map_nolock(vma->vm_mm, pmd, address, &ptl); + pte = pte_offset_map_rw_nolock(vma->vm_mm, pmd, address, &pmdval, &ptl); if (!pte) return 0; - do_pte_lock(ptl); + if (need_lock) { + /* + * Use nested version here to indicate that we are already + * holding one similar spinlock. + */ + spin_lock_nested(ptl, SINGLE_DEPTH_NESTING); + if (unlikely(!pmd_same(pmdval, pmdp_get_lockless(pmd)))) { + pte_unmap_unlock(pte, ptl); + goto again; + } + } ret = do_adjust_pte(vma, address, pfn, pte); - do_pte_unlock(ptl); + if (need_lock) + spin_unlock(ptl); pte_unmap(pte); return ret; @@ -133,8 +122,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, static void make_coherent(struct address_space *mapping, struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, unsigned long pfn) + unsigned long addr, pte_t *ptep, unsigned long pfn) { + const unsigned long pmd_start_addr = ALIGN_DOWN(addr, PMD_SIZE); + const unsigned long pmd_end_addr = pmd_start_addr + PMD_SIZE; struct mm_struct *mm = vma->vm_mm; struct vm_area_struct *mpnt; unsigned long offset; @@ -151,6 +142,14 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, flush_dcache_mmap_lock(mapping); vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) { /* + * If we are using split PTE locks, then we need to take the pte + * lock. Otherwise we are using shared mm->page_table_lock which + * is already locked, thus cannot take it. + */ + bool need_lock = IS_ENABLED(CONFIG_SPLIT_PTE_PTLOCKS); + unsigned long mpnt_addr; + + /* * If this VMA is not in our MM, we can ignore it. * Note that we intentionally mask out the VMA * that we are fixing up. @@ -160,7 +159,12 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, if (!(mpnt->vm_flags & VM_MAYSHARE)) continue; offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT; - aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn); + mpnt_addr = mpnt->vm_start + offset; + + /* Avoid deadlocks by not grabbing the same PTE lock again. */ + if (mpnt_addr >= pmd_start_addr && mpnt_addr < pmd_end_addr) + need_lock = false; + aliases += adjust_pte(mpnt, mpnt_addr, pfn, need_lock); } flush_dcache_mmap_unlock(mapping); if (aliases) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 439dc6a26bb9..ab01b51de559 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -25,6 +25,8 @@ #include "fault.h" +#ifdef CONFIG_MMU + bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size) { unsigned long addr = (unsigned long)unsafe_src; @@ -32,8 +34,6 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size) return addr >= TASK_SIZE && ULONG_MAX - addr >= size; } -#ifdef CONFIG_MMU - /* * This is useful to dump out the page tables associated with * 'addr' in mm 'mm'. @@ -226,9 +226,6 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) } #ifdef CONFIG_MMU -#define VM_FAULT_BADMAP ((__force vm_fault_t)0x010000) -#define VM_FAULT_BADACCESS ((__force vm_fault_t)0x020000) - static inline bool is_permission_fault(unsigned int fsr) { int fs = fsr_fs(fsr); @@ -242,6 +239,27 @@ static inline bool is_permission_fault(unsigned int fsr) return false; } +#ifdef CONFIG_CPU_TTBR0_PAN +static inline bool ttbr0_usermode_access_allowed(struct pt_regs *regs) +{ + struct svc_pt_regs *svcregs; + + /* If we are in user mode: permission granted */ + if (user_mode(regs)) + return true; + + /* uaccess state saved above pt_regs on SVC exception entry */ + svcregs = to_svc_pt_regs(regs); + + return !(svcregs->ttbcr & TTBCR_EPD0); +} +#else +static inline bool ttbr0_usermode_access_allowed(struct pt_regs *regs) +{ + return true; +} +#endif + static int __kprobes do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { @@ -285,6 +303,14 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); + /* + * Privileged access aborts with CONFIG_CPU_TTBR0_PAN enabled are + * routed via the translation fault mechanism. Check whether uaccess + * is disabled while in kernel mode. + */ + if (!ttbr0_usermode_access_allowed(regs)) + goto no_context; + if (!(flags & FAULT_FLAG_USER)) goto lock_mmap; @@ -294,7 +320,10 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (!(vma->vm_flags & vm_flags)) { vma_end_read(vma); - goto lock_mmap; + count_vm_vma_lock_event(VMA_LOCK_SUCCESS); + fault = 0; + code = SEGV_ACCERR; + goto bad_area; } fault = handle_mm_fault(vma, addr, flags | FAULT_FLAG_VMA_LOCK, regs); if (!(fault & (VM_FAULT_RETRY | VM_FAULT_COMPLETED))) @@ -319,7 +348,8 @@ lock_mmap: retry: vma = lock_mm_and_find_vma(mm, addr, regs); if (unlikely(!vma)) { - fault = VM_FAULT_BADMAP; + fault = 0; + code = SEGV_MAPERR; goto bad_area; } @@ -327,10 +357,14 @@ retry: * ok, we have a good vm_area for this memory access, check the * permissions on the VMA allow for the fault which occurred. */ - if (!(vma->vm_flags & vm_flags)) - fault = VM_FAULT_BADACCESS; - else - fault = handle_mm_fault(vma, addr & PAGE_MASK, flags, regs); + if (!(vma->vm_flags & vm_flags)) { + mmap_read_unlock(mm); + fault = 0; + code = SEGV_ACCERR; + goto bad_area; + } + + fault = handle_mm_fault(vma, addr & PAGE_MASK, flags, regs); /* If we need to retry but a fatal signal is pending, handle the * signal first. We do not need to release the mmap_lock because @@ -356,12 +390,11 @@ retry: mmap_read_unlock(mm); done: - /* - * Handle the "normal" case first - VM_FAULT_MAJOR - */ - if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) + /* Handle the "normal" case first */ + if (likely(!(fault & VM_FAULT_ERROR))) return 0; + code = SEGV_MAPERR; bad_area: /* * If we are in kernel mode at this point, we @@ -393,8 +426,6 @@ bad_area: * isn't in our memory map.. */ sig = SIGSEGV; - code = fault == VM_FAULT_BADACCESS ? - SEGV_ACCERR : SEGV_MAPERR; } __do_user_fault(addr, fsr, sig, code, regs); diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c deleted file mode 100644 index dd7a0277c5c0..000000000000 --- a/arch/arm/mm/hugetlbpage.c +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mm/hugetlbpage.c - * - * Copyright (C) 2012 ARM Ltd. - * - * Based on arch/x86/include/asm/hugetlb.h and Bill Carson's patches - */ - -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/hugetlb.h> -#include <linux/pagemap.h> -#include <linux/err.h> -#include <linux/sysctl.h> -#include <asm/mman.h> -#include <asm/tlb.h> -#include <asm/tlbflush.h> - -/* - * On ARM, huge pages are backed by pmd's rather than pte's, so we do a lot - * of type casting from pmd_t * to pte_t *. - */ - -int pud_huge(pud_t pud) -{ - return 0; -} - -int pmd_huge(pmd_t pmd) -{ - return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT); -} diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 448e57c6f653..4a833e89782a 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -84,8 +84,15 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start, unsigned long addr, end; unsigned long next; +#ifdef CONFIG_XIP_KERNEL + addr = (phys_addr_t)(text_start) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + + CONFIG_XIP_PHYS_ADDR; + end = (phys_addr_t)(text_end) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + + CONFIG_XIP_PHYS_ADDR; +#else addr = virt_to_idmap(text_start); end = virt_to_idmap(text_end); +#endif pr_info("Setting up static identity map for 0x%lx - 0x%lx\n", addr, end); prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index e8c6f4be0ce1..54bdca025c9f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -22,6 +22,7 @@ #include <linux/sizes.h> #include <linux/stop_machine.h> #include <linux/swiotlb.h> +#include <linux/execmem.h> #include <asm/cp15.h> #include <asm/mach-types.h> @@ -236,56 +237,17 @@ static inline void poison_init_mem(void *s, size_t count) *p++ = 0xe7fddef0; } -static void __init free_highpages(void) -{ -#ifdef CONFIG_HIGHMEM - unsigned long max_low = max_low_pfn; - phys_addr_t range_start, range_end; - u64 i; - - /* set highmem page free */ - for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE, - &range_start, &range_end, NULL) { - unsigned long start = PFN_UP(range_start); - unsigned long end = PFN_DOWN(range_end); - - /* Ignore complete lowmem entries */ - if (end <= max_low) - continue; - - /* Truncate partial highmem entries */ - if (start < max_low) - start = max_low; - - for (; start < end; start++) - free_highmem_page(pfn_to_page(start)); - } -#endif -} - -/* - * mem_init() marks the free areas in the mem_map and tells us how much - * memory is free. This is done after various parts of the system have - * claimed their memory after the kernel image. - */ -void __init mem_init(void) +void __init arch_mm_preinit(void) { #ifdef CONFIG_ARM_LPAE swiotlb_init(max_pfn > arm_dma_pfn_limit, SWIOTLB_VERBOSE); #endif - set_max_mapnr(pfn_to_page(max_pfn) - mem_map); - - /* this will put all unused low memory onto the freelists */ - memblock_free_all(); - #ifdef CONFIG_SA1111 /* now that our DMA memory is actually so designated, we can free it */ - free_reserved_area(__va(PHYS_OFFSET), swapper_pg_dir, -1, NULL); + memblock_phys_free(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET); #endif - free_highpages(); - /* * Check boundaries twice: Some fundamental inconsistencies can * be detected at build time already. @@ -486,3 +448,47 @@ void free_initrd_mem(unsigned long start, unsigned long end) free_reserved_area((void *)start, (void *)end, -1, "initrd"); } #endif + +#ifdef CONFIG_EXECMEM + +#ifdef CONFIG_XIP_KERNEL +/* + * The XIP kernel text is mapped in the module area for modules and + * some other stuff to work without any indirect relocations. + * MODULES_VADDR is redefined here and not in asm/memory.h to avoid + * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. + */ +#undef MODULES_VADDR +#define MODULES_VADDR (((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK) +#endif + +#ifdef CONFIG_MMU +static struct execmem_info execmem_info __ro_after_init; + +struct execmem_info __init *execmem_arch_setup(void) +{ + unsigned long fallback_start = 0, fallback_end = 0; + + if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS)) { + fallback_start = VMALLOC_START; + fallback_end = VMALLOC_END; + } + + execmem_info = (struct execmem_info){ + .ranges = { + [EXECMEM_DEFAULT] = { + .start = MODULES_VADDR, + .end = MODULES_END, + .pgprot = PAGE_KERNEL_EXEC, + .alignment = 1, + .fallback_start = fallback_start, + .fallback_end = fallback_end, + }, + }, + }; + + return &execmem_info; +} +#endif /* CONFIG_MMU */ + +#endif /* CONFIG_EXECMEM */ diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 794cfea9f9d4..748698e91a4b 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -23,6 +23,7 @@ */ #include <linux/module.h> #include <linux/errno.h> +#include <linux/kasan.h> #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/io.h> @@ -115,16 +116,40 @@ int ioremap_page(unsigned long virt, unsigned long phys, } EXPORT_SYMBOL(ioremap_page); +#ifdef CONFIG_KASAN +static unsigned long arm_kasan_mem_to_shadow(unsigned long addr) +{ + return (unsigned long)kasan_mem_to_shadow((void *)addr); +} +#else +static unsigned long arm_kasan_mem_to_shadow(unsigned long addr) +{ + return 0; +} +#endif + +static void memcpy_pgd(struct mm_struct *mm, unsigned long start, + unsigned long end) +{ + end = ALIGN(end, PGDIR_SIZE); + memcpy(pgd_offset(mm, start), pgd_offset_k(start), + sizeof(pgd_t) * (pgd_index(end) - pgd_index(start))); +} + void __check_vmalloc_seq(struct mm_struct *mm) { int seq; do { - seq = atomic_read(&init_mm.context.vmalloc_seq); - memcpy(pgd_offset(mm, VMALLOC_START), - pgd_offset_k(VMALLOC_START), - sizeof(pgd_t) * (pgd_index(VMALLOC_END) - - pgd_index(VMALLOC_START))); + seq = atomic_read_acquire(&init_mm.context.vmalloc_seq); + memcpy_pgd(mm, VMALLOC_START, VMALLOC_END); + if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) { + unsigned long start = + arm_kasan_mem_to_shadow(VMALLOC_START); + unsigned long end = + arm_kasan_mem_to_shadow(VMALLOC_END); + memcpy_pgd(mm, start, end); + } /* * Use a store-release so that other CPUs that observe the * counter's new value are guaranteed to see the results of the @@ -411,7 +436,7 @@ void __arm_iomem_set_ro(void __iomem *ptr, size_t size) set_memory_ro((unsigned long)ptr, PAGE_ALIGN(size) / PAGE_SIZE); } -void *arch_memremap_wb(phys_addr_t phys_addr, size_t size) +void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags) { return (__force void *)arch_ioremap_caller(phys_addr, size, MT_MEMORY_RW, diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index a0f8a0ca0788..3dbb383c26d5 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -28,13 +28,14 @@ */ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, - unsigned long len, unsigned long pgoff, unsigned long flags) + unsigned long len, unsigned long pgoff, + unsigned long flags, vm_flags_t vm_flags) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); - struct vm_unmapped_area_info info; + struct vm_unmapped_area_info info = {}; /* * We only need to do colour alignment if either the I or D @@ -68,7 +69,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, return addr; } - info.flags = 0; info.length = len; info.low_limit = mm->mmap_base; info.high_limit = TASK_SIZE; @@ -79,15 +79,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, - const unsigned long len, const unsigned long pgoff, - const unsigned long flags) + const unsigned long len, const unsigned long pgoff, + const unsigned long flags, vm_flags_t vm_flags) { struct vm_area_struct *vma; struct mm_struct *mm = current->mm; unsigned long addr = addr0; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); - struct vm_unmapped_area_info info; + struct vm_unmapped_area_info info = {}; /* * We only need to do colour alignment if either the I or D diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index c24e29c0b9a4..f02f872ea8a9 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -726,13 +726,8 @@ EXPORT_SYMBOL(phys_mem_access_prot); static void __init *early_alloc(unsigned long sz) { - void *ptr = memblock_alloc(sz, sz); + return memblock_alloc_or_panic(sz, sz); - if (!ptr) - panic("%s: Failed to allocate %lu bytes align=0x%lx\n", - __func__, sz, sz); - - return ptr; } static void *__init late_alloc(unsigned long sz) @@ -1027,10 +1022,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr) if (!nr) return; - svm = memblock_alloc(sizeof(*svm) * nr, __alignof__(*svm)); - if (!svm) - panic("%s: Failed to allocate %zu bytes align=0x%zx\n", - __func__, sizeof(*svm) * nr, __alignof__(*svm)); + svm = memblock_alloc_or_panic(sizeof(*svm) * nr, __alignof__(*svm)); for (md = io_desc; nr; md++, nr--) { create_mapping(md); @@ -1052,10 +1044,7 @@ void __init vm_reserve_area_early(unsigned long addr, unsigned long size, struct vm_struct *vm; struct static_vm *svm; - svm = memblock_alloc(sizeof(*svm), __alignof__(*svm)); - if (!svm) - panic("%s: Failed to allocate %zu bytes align=0x%zx\n", - __func__, sizeof(*svm), __alignof__(*svm)); + svm = memblock_alloc_or_panic(sizeof(*svm), __alignof__(*svm)); vm = &svm->vm; vm->addr = (void *)addr; @@ -1403,18 +1392,6 @@ static void __init devicemaps_init(const struct machine_desc *mdesc) } /* - * Map the kernel if it is XIP. - * It is always first in the modulearea. - */ -#ifdef CONFIG_XIP_KERNEL - map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); - map.virtual = MODULES_VADDR; - map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK; - map.type = MT_ROM; - create_mapping(&map); -#endif - - /* * Map the cache flushing regions. */ #ifdef FLUSH_BASE @@ -1603,12 +1580,27 @@ static void __init map_kernel(void) * This will only persist until we turn on proper memory management later on * and we remap the whole kernel with page granularity. */ +#ifdef CONFIG_XIP_KERNEL + phys_addr_t kernel_nx_start = kernel_sec_start; +#else phys_addr_t kernel_x_start = kernel_sec_start; phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE); phys_addr_t kernel_nx_start = kernel_x_end; +#endif phys_addr_t kernel_nx_end = kernel_sec_end; struct map_desc map; + /* + * Map the kernel if it is XIP. + * It is always first in the modulearea. + */ +#ifdef CONFIG_XIP_KERNEL + map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); + map.virtual = MODULES_VADDR; + map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK; + map.type = MT_ROM; + create_mapping(&map); +#else map.pfn = __phys_to_pfn(kernel_x_start); map.virtual = __phys_to_virt(kernel_x_start); map.length = kernel_x_end - kernel_x_start; @@ -1618,7 +1610,7 @@ static void __init map_kernel(void) /* If the nx part is small it may end up covered by the tail of the RWX section */ if (kernel_x_end == kernel_nx_end) return; - +#endif map.pfn = __phys_to_pfn(kernel_nx_start); map.virtual = __phys_to_virt(kernel_nx_start); map.length = kernel_nx_end - kernel_nx_start; @@ -1638,7 +1630,7 @@ static void __init early_paging_init(const struct machine_desc *mdesc) { pgtables_remap *lpae_pgtables_remap; unsigned long pa_pgd; - unsigned int cr, ttbcr; + u32 cr, ttbcr, tmp; long long offset; if (!mdesc->pv_fixup) @@ -1687,9 +1679,10 @@ static void __init early_paging_init(const struct machine_desc *mdesc) */ cr = get_cr(); set_cr(cr & ~(CR_I | CR_C)); - asm("mrc p15, 0, %0, c2, c0, 2" : "=r" (ttbcr)); - asm volatile("mcr p15, 0, %0, c2, c0, 2" - : : "r" (ttbcr & ~(3 << 8 | 3 << 10))); + ttbcr = cpu_get_ttbcr(); + /* Disable all kind of caching of the translation table */ + tmp = ttbcr & ~(TTBCR_ORGN0_MASK | TTBCR_IRGN0_MASK); + cpu_set_ttbcr(tmp); flush_cache_all(); /* @@ -1701,7 +1694,7 @@ static void __init early_paging_init(const struct machine_desc *mdesc) lpae_pgtables_remap(offset, pa_pgd); /* Re-enable the caches and cacheable TLB walks */ - asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr)); + cpu_set_ttbcr(ttbcr); set_cr(cr); } @@ -1763,6 +1756,11 @@ void __init paging_init(const struct machine_desc *mdesc) { void *zero_page; +#ifdef CONFIG_XIP_KERNEL + /* Store the kernel RW RAM region start/end in these variables */ + kernel_sec_start = CONFIG_PHYS_OFFSET & SECTION_MASK; + kernel_sec_end = round_up(__pa(_end), SECTION_SIZE); +#endif pr_debug("physical kernel sections: 0x%08llx-0x%08llx\n", kernel_sec_start, kernel_sec_end); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index c415f3859b20..d638cc87807e 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -162,10 +162,7 @@ void __init paging_init(const struct machine_desc *mdesc) mpu_setup(); /* allocate the zero page. */ - zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE); - if (!zero_page) - panic("%s: Failed to allocate %lu bytes align=0x%lx\n", - __func__, PAGE_SIZE, PAGE_SIZE); + zero_page = (void *)memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE); bootmem_init(); @@ -251,7 +248,7 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size) EXPORT_SYMBOL_GPL(pci_remap_cfgspace); #endif -void *arch_memremap_wb(phys_addr_t phys_addr, size_t size) +void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags) { return (void *)phys_addr; } diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index f8e9bc58a84f..4eb81b7ed03a 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -17,11 +17,11 @@ #include "mm.h" #ifdef CONFIG_ARM_LPAE -#define __pgd_alloc() kmalloc_array(PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL) -#define __pgd_free(pgd) kfree(pgd) +#define _pgd_alloc(mm) kmalloc_array(PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL | __GFP_ZERO) +#define _pgd_free(mm, pgd) kfree(pgd) #else -#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL, 2) -#define __pgd_free(pgd) free_pages((unsigned long)pgd, 2) +#define _pgd_alloc(mm) __pgd_alloc(mm, 2) +#define _pgd_free(mm, pgd) __pgd_free(mm, pgd) #endif /* @@ -35,12 +35,10 @@ pgd_t *pgd_alloc(struct mm_struct *mm) pmd_t *new_pmd, *init_pmd; pte_t *new_pte, *init_pte; - new_pgd = __pgd_alloc(); + new_pgd = _pgd_alloc(mm); if (!new_pgd) goto no_pgd; - memset(new_pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t)); - /* * Copy over the kernel and IO PGD entries */ @@ -134,7 +132,7 @@ no_pmd: no_pud: p4d_free(mm, new_p4d); no_p4d: - __pgd_free(new_pgd); + _pgd_free(mm, new_pgd); no_pgd: return NULL; } @@ -207,5 +205,5 @@ no_pgd: p4d_free(mm, p4d); } #endif - __pgd_free(pgd_base); + _pgd_free(mm, pgd_base); } diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 6837cf7a4812..d0ce3414a13e 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -56,18 +57,20 @@ /* * cpu_arm1020_proc_init() */ -ENTRY(cpu_arm1020_proc_init) +SYM_TYPED_FUNC_START(cpu_arm1020_proc_init) ret lr +SYM_FUNC_END(cpu_arm1020_proc_init) /* * cpu_arm1020_proc_fin() */ -ENTRY(cpu_arm1020_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm1020_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm1020_proc_fin) /* * cpu_arm1020_reset(loc) @@ -80,7 +83,7 @@ ENTRY(cpu_arm1020_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm1020_reset) +SYM_TYPED_FUNC_START(cpu_arm1020_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -92,16 +95,17 @@ ENTRY(cpu_arm1020_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm1020_reset) +SYM_FUNC_END(cpu_arm1020_reset) .popsection /* * cpu_arm1020_do_idle() */ .align 5 -ENTRY(cpu_arm1020_do_idle) +SYM_TYPED_FUNC_START(cpu_arm1020_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr +SYM_FUNC_END(cpu_arm1020_do_idle) /* ================================= CACHE ================================ */ @@ -112,13 +116,13 @@ ENTRY(cpu_arm1020_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm1020_flush_icache_all) +SYM_TYPED_FUNC_START(arm1020_flush_icache_all) #ifndef CONFIG_CPU_ICACHE_DISABLE mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif ret lr -ENDPROC(arm1020_flush_icache_all) +SYM_FUNC_END(arm1020_flush_icache_all) /* * flush_user_cache_all() @@ -126,14 +130,14 @@ ENDPROC(arm1020_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(arm1020_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm1020_flush_user_cache_all, arm1020_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm1020_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm1020_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -154,6 +158,7 @@ __flush_whole_cache: #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -165,7 +170,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags for this space */ -ENTRY(arm1020_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm1020_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -185,6 +190,7 @@ ENTRY(arm1020_flush_user_cache_range) #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -196,8 +202,11 @@ ENTRY(arm1020_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1020_coherent_kern_range) - /* FALLTRHOUGH */ +SYM_TYPED_FUNC_START(arm1020_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm1020_coherent_user_range +#endif +SYM_FUNC_END(arm1020_coherent_kern_range) /* * coherent_user_range(start, end) @@ -209,7 +218,7 @@ ENTRY(arm1020_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1020_coherent_user_range) +SYM_TYPED_FUNC_START(arm1020_coherent_user_range) mov ip, #0 bic r0, r0, #CACHE_DLINESIZE - 1 mcr p15, 0, ip, c7, c10, 4 @@ -227,6 +236,7 @@ ENTRY(arm1020_coherent_user_range) mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm1020_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -237,7 +247,7 @@ ENTRY(arm1020_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm1020_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm1020_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE add r1, r0, r1 @@ -249,6 +259,7 @@ ENTRY(arm1020_flush_kern_dcache_area) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -314,7 +325,7 @@ arm1020_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1020_dma_flush_range) +SYM_TYPED_FUNC_START(arm1020_dma_flush_range) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE bic r0, r0, #CACHE_DLINESIZE - 1 @@ -327,6 +338,7 @@ ENTRY(arm1020_dma_flush_range) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -334,13 +346,13 @@ ENTRY(arm1020_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1020_dma_map_area) +SYM_TYPED_FUNC_START(arm1020_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm1020_dma_clean_range bcs arm1020_dma_inv_range b arm1020_dma_flush_range -ENDPROC(arm1020_dma_map_area) +SYM_FUNC_END(arm1020_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -348,18 +360,12 @@ ENDPROC(arm1020_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1020_dma_unmap_area) +SYM_TYPED_FUNC_START(arm1020_dma_unmap_area) ret lr -ENDPROC(arm1020_dma_unmap_area) - - .globl arm1020_flush_kern_cache_louis - .equ arm1020_flush_kern_cache_louis, arm1020_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm1020 +SYM_FUNC_END(arm1020_dma_unmap_area) .align 5 -ENTRY(cpu_arm1020_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm1020_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_DISABLE mov ip, #0 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry @@ -369,6 +375,7 @@ ENTRY(cpu_arm1020_dcache_clean_area) bhi 1b #endif ret lr +SYM_FUNC_END(cpu_arm1020_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -380,7 +387,7 @@ ENTRY(cpu_arm1020_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm1020_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm1020_switch_mm) #ifdef CONFIG_MMU #ifndef CONFIG_CPU_DCACHE_DISABLE mcr p15, 0, r3, c7, c10, 4 @@ -408,14 +415,15 @@ ENTRY(cpu_arm1020_switch_mm) mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif /* CONFIG_MMU */ ret lr - +SYM_FUNC_END(cpu_arm1020_switch_mm) + /* * cpu_arm1020_set_pte(ptep, pte) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1020_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm1020_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -426,6 +434,7 @@ ENTRY(cpu_arm1020_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ ret lr +SYM_FUNC_END(cpu_arm1020_set_pte_ext) .type __arm1020_setup, #function __arm1020_setup: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index df49b10250b8..64f031bf6eff 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -56,18 +57,20 @@ /* * cpu_arm1020e_proc_init() */ -ENTRY(cpu_arm1020e_proc_init) +SYM_TYPED_FUNC_START(cpu_arm1020e_proc_init) ret lr +SYM_FUNC_END(cpu_arm1020e_proc_init) /* * cpu_arm1020e_proc_fin() */ -ENTRY(cpu_arm1020e_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm1020e_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm1020e_proc_fin) /* * cpu_arm1020e_reset(loc) @@ -80,7 +83,7 @@ ENTRY(cpu_arm1020e_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm1020e_reset) +SYM_TYPED_FUNC_START(cpu_arm1020e_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -92,16 +95,17 @@ ENTRY(cpu_arm1020e_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm1020e_reset) +SYM_FUNC_END(cpu_arm1020e_reset) .popsection /* * cpu_arm1020e_do_idle() */ .align 5 -ENTRY(cpu_arm1020e_do_idle) +SYM_TYPED_FUNC_START(cpu_arm1020e_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr +SYM_FUNC_END(cpu_arm1020e_do_idle) /* ================================= CACHE ================================ */ @@ -112,13 +116,13 @@ ENTRY(cpu_arm1020e_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm1020e_flush_icache_all) +SYM_TYPED_FUNC_START(arm1020e_flush_icache_all) #ifndef CONFIG_CPU_ICACHE_DISABLE mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif ret lr -ENDPROC(arm1020e_flush_icache_all) +SYM_FUNC_END(arm1020e_flush_icache_all) /* * flush_user_cache_all() @@ -126,14 +130,14 @@ ENDPROC(arm1020e_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(arm1020e_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm1020e_flush_user_cache_all, arm1020e_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm1020e_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm1020e_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -153,6 +157,7 @@ __flush_whole_cache: #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020e_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -164,7 +169,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags for this space */ -ENTRY(arm1020e_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm1020e_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -182,6 +187,7 @@ ENTRY(arm1020e_flush_user_cache_range) #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020e_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -193,8 +199,12 @@ ENTRY(arm1020e_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1020e_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm1020e_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm1020e_coherent_user_range +#endif +SYM_FUNC_END(arm1020e_coherent_kern_range) + /* * coherent_user_range(start, end) * @@ -205,7 +215,7 @@ ENTRY(arm1020e_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1020e_coherent_user_range) +SYM_TYPED_FUNC_START(arm1020e_coherent_user_range) mov ip, #0 bic r0, r0, #CACHE_DLINESIZE - 1 1: @@ -221,6 +231,7 @@ ENTRY(arm1020e_coherent_user_range) mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm1020e_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -231,7 +242,7 @@ ENTRY(arm1020e_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm1020e_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm1020e_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE add r1, r0, r1 @@ -242,6 +253,7 @@ ENTRY(arm1020e_flush_kern_dcache_area) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020e_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -302,7 +314,7 @@ arm1020e_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1020e_dma_flush_range) +SYM_TYPED_FUNC_START(arm1020e_dma_flush_range) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE bic r0, r0, #CACHE_DLINESIZE - 1 @@ -313,6 +325,7 @@ ENTRY(arm1020e_dma_flush_range) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1020e_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -320,13 +333,13 @@ ENTRY(arm1020e_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1020e_dma_map_area) +SYM_TYPED_FUNC_START(arm1020e_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm1020e_dma_clean_range bcs arm1020e_dma_inv_range b arm1020e_dma_flush_range -ENDPROC(arm1020e_dma_map_area) +SYM_FUNC_END(arm1020e_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -334,18 +347,12 @@ ENDPROC(arm1020e_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1020e_dma_unmap_area) +SYM_TYPED_FUNC_START(arm1020e_dma_unmap_area) ret lr -ENDPROC(arm1020e_dma_unmap_area) - - .globl arm1020e_flush_kern_cache_louis - .equ arm1020e_flush_kern_cache_louis, arm1020e_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm1020e +SYM_FUNC_END(arm1020e_dma_unmap_area) .align 5 -ENTRY(cpu_arm1020e_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm1020e_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_DISABLE mov ip, #0 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry @@ -354,6 +361,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area) bhi 1b #endif ret lr +SYM_FUNC_END(cpu_arm1020e_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -365,7 +373,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm1020e_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm1020e_switch_mm) #ifdef CONFIG_MMU #ifndef CONFIG_CPU_DCACHE_DISABLE mcr p15, 0, r3, c7, c10, 4 @@ -392,14 +400,15 @@ ENTRY(cpu_arm1020e_switch_mm) mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif ret lr - +SYM_FUNC_END(cpu_arm1020e_switch_mm) + /* * cpu_arm1020e_set_pte(ptep, pte) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1020e_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm1020e_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -408,6 +417,7 @@ ENTRY(cpu_arm1020e_set_pte_ext) #endif #endif /* CONFIG_MMU */ ret lr +SYM_FUNC_END(cpu_arm1020e_set_pte_ext) .type __arm1020e_setup, #function __arm1020e_setup: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index e89ce467f672..42ed5ed07252 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -56,18 +57,20 @@ /* * cpu_arm1022_proc_init() */ -ENTRY(cpu_arm1022_proc_init) +SYM_TYPED_FUNC_START(cpu_arm1022_proc_init) ret lr +SYM_FUNC_END(cpu_arm1022_proc_init) /* * cpu_arm1022_proc_fin() */ -ENTRY(cpu_arm1022_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm1022_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm1022_proc_fin) /* * cpu_arm1022_reset(loc) @@ -80,7 +83,7 @@ ENTRY(cpu_arm1022_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm1022_reset) +SYM_TYPED_FUNC_START(cpu_arm1022_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -92,16 +95,17 @@ ENTRY(cpu_arm1022_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm1022_reset) +SYM_FUNC_END(cpu_arm1022_reset) .popsection /* * cpu_arm1022_do_idle() */ .align 5 -ENTRY(cpu_arm1022_do_idle) +SYM_TYPED_FUNC_START(cpu_arm1022_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr +SYM_FUNC_END(cpu_arm1022_do_idle) /* ================================= CACHE ================================ */ @@ -112,13 +116,13 @@ ENTRY(cpu_arm1022_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm1022_flush_icache_all) +SYM_TYPED_FUNC_START(arm1022_flush_icache_all) #ifndef CONFIG_CPU_ICACHE_DISABLE mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif ret lr -ENDPROC(arm1022_flush_icache_all) +SYM_FUNC_END(arm1022_flush_icache_all) /* * flush_user_cache_all() @@ -126,14 +130,14 @@ ENDPROC(arm1022_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(arm1022_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm1022_flush_user_cache_all, arm1022_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm1022_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm1022_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -152,6 +156,7 @@ __flush_whole_cache: #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1022_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -163,7 +168,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags for this space */ -ENTRY(arm1022_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm1022_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -181,6 +186,7 @@ ENTRY(arm1022_flush_user_cache_range) #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1022_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -192,8 +198,11 @@ ENTRY(arm1022_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1022_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm1022_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm1022_coherent_user_range +#endif +SYM_FUNC_END(arm1022_coherent_kern_range) /* * coherent_user_range(start, end) @@ -205,7 +214,7 @@ ENTRY(arm1022_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1022_coherent_user_range) +SYM_TYPED_FUNC_START(arm1022_coherent_user_range) mov ip, #0 bic r0, r0, #CACHE_DLINESIZE - 1 1: @@ -221,6 +230,7 @@ ENTRY(arm1022_coherent_user_range) mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm1022_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -231,7 +241,7 @@ ENTRY(arm1022_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm1022_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm1022_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE add r1, r0, r1 @@ -242,6 +252,7 @@ ENTRY(arm1022_flush_kern_dcache_area) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1022_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -302,7 +313,7 @@ arm1022_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1022_dma_flush_range) +SYM_TYPED_FUNC_START(arm1022_dma_flush_range) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE bic r0, r0, #CACHE_DLINESIZE - 1 @@ -313,6 +324,7 @@ ENTRY(arm1022_dma_flush_range) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1022_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -320,13 +332,13 @@ ENTRY(arm1022_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1022_dma_map_area) +SYM_TYPED_FUNC_START(arm1022_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm1022_dma_clean_range bcs arm1022_dma_inv_range b arm1022_dma_flush_range -ENDPROC(arm1022_dma_map_area) +SYM_FUNC_END(arm1022_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -334,18 +346,12 @@ ENDPROC(arm1022_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1022_dma_unmap_area) +SYM_TYPED_FUNC_START(arm1022_dma_unmap_area) ret lr -ENDPROC(arm1022_dma_unmap_area) - - .globl arm1022_flush_kern_cache_louis - .equ arm1022_flush_kern_cache_louis, arm1022_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm1022 +SYM_FUNC_END(arm1022_dma_unmap_area) .align 5 -ENTRY(cpu_arm1022_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm1022_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_DISABLE mov ip, #0 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry @@ -354,6 +360,7 @@ ENTRY(cpu_arm1022_dcache_clean_area) bhi 1b #endif ret lr +SYM_FUNC_END(cpu_arm1022_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -365,7 +372,7 @@ ENTRY(cpu_arm1022_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm1022_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm1022_switch_mm) #ifdef CONFIG_MMU #ifndef CONFIG_CPU_DCACHE_DISABLE mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments @@ -385,14 +392,15 @@ ENTRY(cpu_arm1022_switch_mm) mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif ret lr - +SYM_FUNC_END(cpu_arm1022_switch_mm) + /* * cpu_arm1022_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1022_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm1022_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -401,6 +409,7 @@ ENTRY(cpu_arm1022_set_pte_ext) #endif #endif /* CONFIG_MMU */ ret lr +SYM_FUNC_END(cpu_arm1022_set_pte_ext) .type __arm1022_setup, #function __arm1022_setup: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 7fdd1a205e8e..b3ae62cd553a 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -56,18 +57,20 @@ /* * cpu_arm1026_proc_init() */ -ENTRY(cpu_arm1026_proc_init) +SYM_TYPED_FUNC_START(cpu_arm1026_proc_init) ret lr +SYM_FUNC_END(cpu_arm1026_proc_init) /* * cpu_arm1026_proc_fin() */ -ENTRY(cpu_arm1026_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm1026_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm1026_proc_fin) /* * cpu_arm1026_reset(loc) @@ -80,7 +83,7 @@ ENTRY(cpu_arm1026_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm1026_reset) +SYM_TYPED_FUNC_START(cpu_arm1026_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -92,16 +95,17 @@ ENTRY(cpu_arm1026_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm1026_reset) +SYM_FUNC_END(cpu_arm1026_reset) .popsection /* * cpu_arm1026_do_idle() */ .align 5 -ENTRY(cpu_arm1026_do_idle) +SYM_TYPED_FUNC_START(cpu_arm1026_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr +SYM_FUNC_END(cpu_arm1026_do_idle) /* ================================= CACHE ================================ */ @@ -112,13 +116,13 @@ ENTRY(cpu_arm1026_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm1026_flush_icache_all) +SYM_TYPED_FUNC_START(arm1026_flush_icache_all) #ifndef CONFIG_CPU_ICACHE_DISABLE mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif ret lr -ENDPROC(arm1026_flush_icache_all) +SYM_FUNC_END(arm1026_flush_icache_all) /* * flush_user_cache_all() @@ -126,14 +130,14 @@ ENDPROC(arm1026_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(arm1026_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm1026_flush_user_cache_all, arm1026_flush_kern_cache_all) + /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm1026_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm1026_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -147,6 +151,7 @@ __flush_whole_cache: #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1026_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -158,7 +163,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags for this space */ -ENTRY(arm1026_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm1026_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -176,6 +181,7 @@ ENTRY(arm1026_flush_user_cache_range) #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1026_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -187,8 +193,12 @@ ENTRY(arm1026_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1026_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm1026_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm1026_coherent_user_range +#endif +SYM_FUNC_END(arm1026_coherent_kern_range) + /* * coherent_user_range(start, end) * @@ -199,7 +209,7 @@ ENTRY(arm1026_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1026_coherent_user_range) +SYM_TYPED_FUNC_START(arm1026_coherent_user_range) mov ip, #0 bic r0, r0, #CACHE_DLINESIZE - 1 1: @@ -215,6 +225,7 @@ ENTRY(arm1026_coherent_user_range) mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm1026_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -225,7 +236,7 @@ ENTRY(arm1026_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm1026_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm1026_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE add r1, r0, r1 @@ -236,6 +247,7 @@ ENTRY(arm1026_flush_kern_dcache_area) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1026_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -296,7 +308,7 @@ arm1026_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm1026_dma_flush_range) +SYM_TYPED_FUNC_START(arm1026_dma_flush_range) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE bic r0, r0, #CACHE_DLINESIZE - 1 @@ -307,6 +319,7 @@ ENTRY(arm1026_dma_flush_range) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm1026_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -314,13 +327,13 @@ ENTRY(arm1026_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1026_dma_map_area) +SYM_TYPED_FUNC_START(arm1026_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm1026_dma_clean_range bcs arm1026_dma_inv_range b arm1026_dma_flush_range -ENDPROC(arm1026_dma_map_area) +SYM_FUNC_END(arm1026_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -328,18 +341,12 @@ ENDPROC(arm1026_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm1026_dma_unmap_area) +SYM_TYPED_FUNC_START(arm1026_dma_unmap_area) ret lr -ENDPROC(arm1026_dma_unmap_area) - - .globl arm1026_flush_kern_cache_louis - .equ arm1026_flush_kern_cache_louis, arm1026_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm1026 +SYM_FUNC_END(arm1026_dma_unmap_area) .align 5 -ENTRY(cpu_arm1026_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm1026_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_DISABLE mov ip, #0 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry @@ -348,6 +355,7 @@ ENTRY(cpu_arm1026_dcache_clean_area) bhi 1b #endif ret lr +SYM_FUNC_END(cpu_arm1026_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -359,7 +367,7 @@ ENTRY(cpu_arm1026_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm1026_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm1026_switch_mm) #ifdef CONFIG_MMU mov r1, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE @@ -374,14 +382,15 @@ ENTRY(cpu_arm1026_switch_mm) mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif ret lr - +SYM_FUNC_END(cpu_arm1026_switch_mm) + /* * cpu_arm1026_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1026_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm1026_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -390,6 +399,7 @@ ENTRY(cpu_arm1026_set_pte_ext) #endif #endif /* CONFIG_MMU */ ret lr +SYM_FUNC_END(cpu_arm1026_set_pte_ext) .type __arm1026_setup, #function __arm1026_setup: diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 3b687e6dd9fd..59732c334e1d 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -20,6 +20,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -35,24 +36,30 @@ * * Notes : This processor does not require these */ -ENTRY(cpu_arm720_dcache_clean_area) -ENTRY(cpu_arm720_proc_init) +SYM_TYPED_FUNC_START(cpu_arm720_dcache_clean_area) ret lr +SYM_FUNC_END(cpu_arm720_dcache_clean_area) -ENTRY(cpu_arm720_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm720_proc_init) + ret lr +SYM_FUNC_END(cpu_arm720_proc_init) + +SYM_TYPED_FUNC_START(cpu_arm720_proc_fin) mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm720_proc_fin) /* * Function: arm720_proc_do_idle(void) * Params : r0 = unused * Purpose : put the processor in proper idle mode */ -ENTRY(cpu_arm720_do_idle) +SYM_TYPED_FUNC_START(cpu_arm720_do_idle) ret lr +SYM_FUNC_END(cpu_arm720_do_idle) /* * Function: arm720_switch_mm(unsigned long pgd_phys) @@ -60,7 +67,7 @@ ENTRY(cpu_arm720_do_idle) * Purpose : Perform a task switch, saving the old process' state and restoring * the new. */ -ENTRY(cpu_arm720_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm720_switch_mm) #ifdef CONFIG_MMU mov r1, #0 mcr p15, 0, r1, c7, c7, 0 @ invalidate cache @@ -68,6 +75,7 @@ ENTRY(cpu_arm720_switch_mm) mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4) #endif ret lr +SYM_FUNC_END(cpu_arm720_switch_mm) /* * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) @@ -76,11 +84,12 @@ ENTRY(cpu_arm720_switch_mm) * Purpose : Set a PTE and flush it out of any WB cache */ .align 5 -ENTRY(cpu_arm720_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm720_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext wc_disable=0 #endif ret lr +SYM_FUNC_END(cpu_arm720_set_pte_ext) /* * Function: arm720_reset @@ -88,7 +97,7 @@ ENTRY(cpu_arm720_set_pte_ext) * Notes : This sets up everything for a reset */ .pushsection .idmap.text, "ax" -ENTRY(cpu_arm720_reset) +SYM_TYPED_FUNC_START(cpu_arm720_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate cache #ifdef CONFIG_MMU @@ -99,7 +108,7 @@ ENTRY(cpu_arm720_reset) bic ip, ip, #0x2100 @ ..v....s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm720_reset) +SYM_FUNC_END(cpu_arm720_reset) .popsection .type __arm710_setup, #function diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index f2ec3bc60874..78854df63964 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -24,21 +25,32 @@ * * These are not required. */ -ENTRY(cpu_arm740_proc_init) -ENTRY(cpu_arm740_do_idle) -ENTRY(cpu_arm740_dcache_clean_area) -ENTRY(cpu_arm740_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm740_proc_init) ret lr +SYM_FUNC_END(cpu_arm740_proc_init) + +SYM_TYPED_FUNC_START(cpu_arm740_do_idle) + ret lr +SYM_FUNC_END(cpu_arm740_do_idle) + +SYM_TYPED_FUNC_START(cpu_arm740_dcache_clean_area) + ret lr +SYM_FUNC_END(cpu_arm740_dcache_clean_area) + +SYM_TYPED_FUNC_START(cpu_arm740_switch_mm) + ret lr +SYM_FUNC_END(cpu_arm740_switch_mm) /* * cpu_arm740_proc_fin() */ -ENTRY(cpu_arm740_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm740_proc_fin) mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x3f000000 @ bank/f/lock/s bic r0, r0, #0x0000000c @ w-buffer/cache mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm740_proc_fin) /* * cpu_arm740_reset(loc) @@ -46,14 +58,14 @@ ENTRY(cpu_arm740_proc_fin) * Notes : This sets up everything for a reset */ .pushsection .idmap.text, "ax" -ENTRY(cpu_arm740_reset) +SYM_TYPED_FUNC_START(cpu_arm740_reset) mov ip, #0 mcr p15, 0, ip, c7, c0, 0 @ invalidate cache mrc p15, 0, ip, c1, c0, 0 @ get ctrl register bic ip, ip, #0x0000000c @ ............wc.. mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm740_reset) +SYM_FUNC_END(cpu_arm740_reset) .popsection .type __arm740_setup, #function diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 01bbe7576c1c..baa3d4472147 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -23,18 +24,29 @@ * cpu_arm7tdmi_switch_mm() * * These are not required. - */ -ENTRY(cpu_arm7tdmi_proc_init) -ENTRY(cpu_arm7tdmi_do_idle) -ENTRY(cpu_arm7tdmi_dcache_clean_area) -ENTRY(cpu_arm7tdmi_switch_mm) - ret lr +*/ +SYM_TYPED_FUNC_START(cpu_arm7tdmi_proc_init) + ret lr +SYM_FUNC_END(cpu_arm7tdmi_proc_init) + +SYM_TYPED_FUNC_START(cpu_arm7tdmi_do_idle) + ret lr +SYM_FUNC_END(cpu_arm7tdmi_do_idle) + +SYM_TYPED_FUNC_START(cpu_arm7tdmi_dcache_clean_area) + ret lr +SYM_FUNC_END(cpu_arm7tdmi_dcache_clean_area) + +SYM_TYPED_FUNC_START(cpu_arm7tdmi_switch_mm) + ret lr +SYM_FUNC_END(cpu_arm7tdmi_switch_mm) /* * cpu_arm7tdmi_proc_fin() - */ -ENTRY(cpu_arm7tdmi_proc_fin) - ret lr +*/ +SYM_TYPED_FUNC_START(cpu_arm7tdmi_proc_fin) + ret lr +SYM_FUNC_END(cpu_arm7tdmi_proc_fin) /* * Function: cpu_arm7tdmi_reset(loc) @@ -42,9 +54,9 @@ ENTRY(cpu_arm7tdmi_proc_fin) * Purpose : Sets up everything for a reset and jump to the location for soft reset. */ .pushsection .idmap.text, "ax" -ENTRY(cpu_arm7tdmi_reset) +SYM_TYPED_FUNC_START(cpu_arm7tdmi_reset) ret r0 -ENDPROC(cpu_arm7tdmi_reset) +SYM_FUNC_END(cpu_arm7tdmi_reset) .popsection .type __arm7tdmi_setup, #function diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index a234cd8ba5e6..a30df54ad5fa 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -13,6 +13,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -48,18 +49,20 @@ /* * cpu_arm920_proc_init() */ -ENTRY(cpu_arm920_proc_init) +SYM_TYPED_FUNC_START(cpu_arm920_proc_init) ret lr +SYM_FUNC_END(cpu_arm920_proc_init) /* * cpu_arm920_proc_fin() */ -ENTRY(cpu_arm920_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm920_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm920_proc_fin) /* * cpu_arm920_reset(loc) @@ -72,7 +75,7 @@ ENTRY(cpu_arm920_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm920_reset) +SYM_TYPED_FUNC_START(cpu_arm920_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -84,17 +87,17 @@ ENTRY(cpu_arm920_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm920_reset) +SYM_FUNC_END(cpu_arm920_reset) .popsection /* * cpu_arm920_do_idle() */ .align 5 -ENTRY(cpu_arm920_do_idle) +SYM_TYPED_FUNC_START(cpu_arm920_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr - +SYM_FUNC_END(cpu_arm920_do_idle) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -103,11 +106,11 @@ ENTRY(cpu_arm920_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm920_flush_icache_all) +SYM_TYPED_FUNC_START(arm920_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(arm920_flush_icache_all) +SYM_FUNC_END(arm920_flush_icache_all) /* * flush_user_cache_all() @@ -115,15 +118,14 @@ ENDPROC(arm920_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(arm920_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm920_flush_user_cache_all, arm920_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm920_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm920_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -138,6 +140,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm920_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -149,7 +152,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags for address space */ -ENTRY(arm920_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm920_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -164,6 +167,7 @@ ENTRY(arm920_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm920_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -175,8 +179,11 @@ ENTRY(arm920_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm920_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm920_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm920_coherent_user_range +#endif +SYM_FUNC_END(arm920_coherent_kern_range) /* * coherent_user_range(start, end) @@ -188,7 +195,7 @@ ENTRY(arm920_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm920_coherent_user_range) +SYM_TYPED_FUNC_START(arm920_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -198,6 +205,7 @@ ENTRY(arm920_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm920_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -208,7 +216,7 @@ ENTRY(arm920_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm920_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm920_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -218,6 +226,7 @@ ENTRY(arm920_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm920_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -272,7 +281,7 @@ arm920_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm920_dma_flush_range) +SYM_TYPED_FUNC_START(arm920_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -280,6 +289,7 @@ ENTRY(arm920_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm920_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -287,13 +297,13 @@ ENTRY(arm920_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm920_dma_map_area) +SYM_TYPED_FUNC_START(arm920_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm920_dma_clean_range bcs arm920_dma_inv_range b arm920_dma_flush_range -ENDPROC(arm920_dma_map_area) +SYM_FUNC_END(arm920_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -301,24 +311,20 @@ ENDPROC(arm920_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm920_dma_unmap_area) +SYM_TYPED_FUNC_START(arm920_dma_unmap_area) ret lr -ENDPROC(arm920_dma_unmap_area) +SYM_FUNC_END(arm920_dma_unmap_area) - .globl arm920_flush_kern_cache_louis - .equ arm920_flush_kern_cache_louis, arm920_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm920 -#endif +#endif /* !CONFIG_CPU_DCACHE_WRITETHROUGH */ -ENTRY(cpu_arm920_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm920_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE subs r1, r1, #CACHE_DLINESIZE bhi 1b ret lr +SYM_FUNC_END(cpu_arm920_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -330,7 +336,7 @@ ENTRY(cpu_arm920_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm920_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm920_switch_mm) #ifdef CONFIG_MMU mov ip, #0 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -354,6 +360,7 @@ ENTRY(cpu_arm920_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif ret lr +SYM_FUNC_END(cpu_arm920_switch_mm) /* * cpu_arm920_set_pte(ptep, pte, ext) @@ -361,7 +368,7 @@ ENTRY(cpu_arm920_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm920_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm920_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -369,21 +376,22 @@ ENTRY(cpu_arm920_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif ret lr +SYM_FUNC_END(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size .equ cpu_arm920_suspend_size, 4 * 3 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_arm920_do_suspend) +SYM_TYPED_FUNC_START(cpu_arm920_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID mrc p15, 0, r5, c3, c0, 0 @ Domain ID mrc p15, 0, r6, c1, c0, 0 @ Control register stmia r0, {r4 - r6} ldmfd sp!, {r4 - r6, pc} -ENDPROC(cpu_arm920_do_suspend) +SYM_FUNC_END(cpu_arm920_do_suspend) -ENTRY(cpu_arm920_do_resume) +SYM_TYPED_FUNC_START(cpu_arm920_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches @@ -393,7 +401,7 @@ ENTRY(cpu_arm920_do_resume) mcr p15, 0, r1, c2, c0, 0 @ TTB address mov r0, r6 @ control register b cpu_resume_mmu -ENDPROC(cpu_arm920_do_resume) +SYM_FUNC_END(cpu_arm920_do_resume) #endif .type __arm920_setup, #function diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 53c029dcfd83..aac4e048100d 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -14,6 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -50,18 +51,20 @@ /* * cpu_arm922_proc_init() */ -ENTRY(cpu_arm922_proc_init) +SYM_TYPED_FUNC_START(cpu_arm922_proc_init) ret lr +SYM_FUNC_END(cpu_arm922_proc_init) /* * cpu_arm922_proc_fin() */ -ENTRY(cpu_arm922_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm922_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm922_proc_fin) /* * cpu_arm922_reset(loc) @@ -74,7 +77,7 @@ ENTRY(cpu_arm922_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm922_reset) +SYM_TYPED_FUNC_START(cpu_arm922_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -86,17 +89,17 @@ ENTRY(cpu_arm922_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm922_reset) +SYM_FUNC_END(cpu_arm922_reset) .popsection /* * cpu_arm922_do_idle() */ .align 5 -ENTRY(cpu_arm922_do_idle) +SYM_TYPED_FUNC_START(cpu_arm922_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr - +SYM_FUNC_END(cpu_arm922_do_idle) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -105,11 +108,11 @@ ENTRY(cpu_arm922_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm922_flush_icache_all) +SYM_TYPED_FUNC_START(arm922_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(arm922_flush_icache_all) +SYM_FUNC_END(arm922_flush_icache_all) /* * flush_user_cache_all() @@ -117,15 +120,14 @@ ENDPROC(arm922_flush_icache_all) * Clean and invalidate all cache entries in a particular * address space. */ -ENTRY(arm922_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm922_flush_user_cache_all, arm922_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm922_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm922_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -140,6 +142,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm922_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -151,7 +154,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags describing address space */ -ENTRY(arm922_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm922_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -166,6 +169,7 @@ ENTRY(arm922_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm922_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -177,8 +181,11 @@ ENTRY(arm922_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm922_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm922_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm922_coherent_user_range +#endif +SYM_FUNC_END(arm922_coherent_kern_range) /* * coherent_user_range(start, end) @@ -190,7 +197,7 @@ ENTRY(arm922_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm922_coherent_user_range) +SYM_TYPED_FUNC_START(arm922_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -200,6 +207,7 @@ ENTRY(arm922_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm922_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -210,7 +218,7 @@ ENTRY(arm922_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm922_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm922_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -220,6 +228,7 @@ ENTRY(arm922_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm922_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -274,7 +283,7 @@ arm922_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm922_dma_flush_range) +SYM_TYPED_FUNC_START(arm922_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -282,6 +291,7 @@ ENTRY(arm922_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm922_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -289,13 +299,13 @@ ENTRY(arm922_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm922_dma_map_area) +SYM_TYPED_FUNC_START(arm922_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm922_dma_clean_range bcs arm922_dma_inv_range b arm922_dma_flush_range -ENDPROC(arm922_dma_map_area) +SYM_FUNC_END(arm922_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -303,19 +313,13 @@ ENDPROC(arm922_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm922_dma_unmap_area) +SYM_TYPED_FUNC_START(arm922_dma_unmap_area) ret lr -ENDPROC(arm922_dma_unmap_area) - - .globl arm922_flush_kern_cache_louis - .equ arm922_flush_kern_cache_louis, arm922_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm922 -#endif +SYM_FUNC_END(arm922_dma_unmap_area) +#endif /* !CONFIG_CPU_DCACHE_WRITETHROUGH */ -ENTRY(cpu_arm922_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm922_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE @@ -323,6 +327,7 @@ ENTRY(cpu_arm922_dcache_clean_area) bhi 1b #endif ret lr +SYM_FUNC_END(cpu_arm922_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -334,7 +339,7 @@ ENTRY(cpu_arm922_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm922_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm922_switch_mm) #ifdef CONFIG_MMU mov ip, #0 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -358,6 +363,7 @@ ENTRY(cpu_arm922_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif ret lr +SYM_FUNC_END(cpu_arm922_switch_mm) /* * cpu_arm922_set_pte_ext(ptep, pte, ext) @@ -365,7 +371,7 @@ ENTRY(cpu_arm922_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm922_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm922_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -373,6 +379,7 @@ ENTRY(cpu_arm922_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ ret lr +SYM_FUNC_END(cpu_arm922_set_pte_ext) .type __arm922_setup, #function __arm922_setup: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 0bfad62ea858..035941faeb2e 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -37,6 +37,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -71,18 +72,20 @@ /* * cpu_arm925_proc_init() */ -ENTRY(cpu_arm925_proc_init) +SYM_TYPED_FUNC_START(cpu_arm925_proc_init) ret lr +SYM_FUNC_END(cpu_arm925_proc_init) /* * cpu_arm925_proc_fin() */ -ENTRY(cpu_arm925_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm925_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm925_proc_fin) /* * cpu_arm925_reset(loc) @@ -95,14 +98,14 @@ ENTRY(cpu_arm925_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm925_reset) +SYM_TYPED_FUNC_START(cpu_arm925_reset) /* Send software reset to MPU and DSP */ mov ip, #0xff000000 orr ip, ip, #0x00fe0000 orr ip, ip, #0x0000ce00 mov r4, #1 strh r4, [ip, #0x10] -ENDPROC(cpu_arm925_reset) +SYM_FUNC_END(cpu_arm925_reset) .popsection mov ip, #0 @@ -123,7 +126,7 @@ ENDPROC(cpu_arm925_reset) * Called with IRQs disabled */ .align 10 -ENTRY(cpu_arm925_do_idle) +SYM_TYPED_FUNC_START(cpu_arm925_do_idle) mov r0, #0 mrc p15, 0, r1, c1, c0, 0 @ Read control register mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer @@ -132,17 +135,18 @@ ENTRY(cpu_arm925_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable ret lr +SYM_FUNC_END(cpu_arm925_do_idle) /* * flush_icache_all() * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm925_flush_icache_all) +SYM_TYPED_FUNC_START(arm925_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(arm925_flush_icache_all) +SYM_FUNC_END(arm925_flush_icache_all) /* * flush_user_cache_all() @@ -150,15 +154,14 @@ ENDPROC(arm925_flush_icache_all) * Clean and invalidate all cache entries in a particular * address space. */ -ENTRY(arm925_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm925_flush_user_cache_all, arm925_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm925_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm925_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -175,6 +178,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm925_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -186,7 +190,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags describing address space */ -ENTRY(arm925_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm925_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -212,6 +216,7 @@ ENTRY(arm925_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm925_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -223,8 +228,11 @@ ENTRY(arm925_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm925_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm925_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm925_coherent_user_range +#endif +SYM_FUNC_END(arm925_coherent_kern_range) /* * coherent_user_range(start, end) @@ -236,7 +244,7 @@ ENTRY(arm925_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm925_coherent_user_range) +SYM_TYPED_FUNC_START(arm925_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -246,6 +254,7 @@ ENTRY(arm925_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm925_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -256,7 +265,7 @@ ENTRY(arm925_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm925_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm925_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -266,6 +275,7 @@ ENTRY(arm925_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm925_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -324,7 +334,7 @@ arm925_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm925_dma_flush_range) +SYM_TYPED_FUNC_START(arm925_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -337,6 +347,7 @@ ENTRY(arm925_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm925_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -344,13 +355,13 @@ ENTRY(arm925_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm925_dma_map_area) +SYM_TYPED_FUNC_START(arm925_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm925_dma_clean_range bcs arm925_dma_inv_range b arm925_dma_flush_range -ENDPROC(arm925_dma_map_area) +SYM_FUNC_END(arm925_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -358,17 +369,11 @@ ENDPROC(arm925_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm925_dma_unmap_area) +SYM_TYPED_FUNC_START(arm925_dma_unmap_area) ret lr -ENDPROC(arm925_dma_unmap_area) - - .globl arm925_flush_kern_cache_louis - .equ arm925_flush_kern_cache_louis, arm925_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm925 +SYM_FUNC_END(arm925_dma_unmap_area) -ENTRY(cpu_arm925_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm925_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE @@ -377,6 +382,7 @@ ENTRY(cpu_arm925_dcache_clean_area) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(cpu_arm925_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -388,7 +394,7 @@ ENTRY(cpu_arm925_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm925_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm925_switch_mm) #ifdef CONFIG_MMU mov ip, #0 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -406,6 +412,7 @@ ENTRY(cpu_arm925_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif ret lr +SYM_FUNC_END(cpu_arm925_switch_mm) /* * cpu_arm925_set_pte_ext(ptep, pte, ext) @@ -413,7 +420,7 @@ ENTRY(cpu_arm925_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm925_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm925_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -423,6 +430,7 @@ ENTRY(cpu_arm925_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ ret lr +SYM_FUNC_END(cpu_arm925_set_pte_ext) .type __arm925_setup, #function __arm925_setup: diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 0487a2c3439b..6f43d6af2d9a 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -13,6 +13,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -40,18 +41,20 @@ /* * cpu_arm926_proc_init() */ -ENTRY(cpu_arm926_proc_init) +SYM_TYPED_FUNC_START(cpu_arm926_proc_init) ret lr +SYM_FUNC_END(cpu_arm926_proc_init) /* * cpu_arm926_proc_fin() */ -ENTRY(cpu_arm926_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm926_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm926_proc_fin) /* * cpu_arm926_reset(loc) @@ -64,7 +67,7 @@ ENTRY(cpu_arm926_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_arm926_reset) +SYM_TYPED_FUNC_START(cpu_arm926_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -76,7 +79,7 @@ ENTRY(cpu_arm926_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm926_reset) +SYM_FUNC_END(cpu_arm926_reset) .popsection /* @@ -85,7 +88,7 @@ ENDPROC(cpu_arm926_reset) * Called with IRQs disabled */ .align 10 -ENTRY(cpu_arm926_do_idle) +SYM_TYPED_FUNC_START(cpu_arm926_do_idle) mov r0, #0 mrc p15, 0, r1, c1, c0, 0 @ Read control register mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer @@ -98,17 +101,18 @@ ENTRY(cpu_arm926_do_idle) mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable msr cpsr_c, r3 @ Restore FIQ state ret lr +SYM_FUNC_END(cpu_arm926_do_idle) /* * flush_icache_all() * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm926_flush_icache_all) +SYM_TYPED_FUNC_START(arm926_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(arm926_flush_icache_all) +SYM_FUNC_END(arm926_flush_icache_all) /* * flush_user_cache_all() @@ -116,15 +120,14 @@ ENDPROC(arm926_flush_icache_all) * Clean and invalidate all cache entries in a particular * address space. */ -ENTRY(arm926_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm926_flush_user_cache_all, arm926_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm926_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm926_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -138,6 +141,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm926_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -149,7 +153,7 @@ __flush_whole_cache: * - end - end address (exclusive) * - flags - vm_flags describing address space */ -ENTRY(arm926_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm926_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -175,6 +179,7 @@ ENTRY(arm926_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm926_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -186,8 +191,11 @@ ENTRY(arm926_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm926_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm926_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm926_coherent_user_range +#endif +SYM_FUNC_END(arm926_coherent_kern_range) /* * coherent_user_range(start, end) @@ -199,7 +207,7 @@ ENTRY(arm926_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm926_coherent_user_range) +SYM_TYPED_FUNC_START(arm926_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -209,6 +217,7 @@ ENTRY(arm926_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm926_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -219,7 +228,7 @@ ENTRY(arm926_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm926_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm926_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -229,6 +238,7 @@ ENTRY(arm926_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm926_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -287,7 +297,7 @@ arm926_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(arm926_dma_flush_range) +SYM_TYPED_FUNC_START(arm926_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -300,6 +310,7 @@ ENTRY(arm926_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm926_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -307,13 +318,13 @@ ENTRY(arm926_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm926_dma_map_area) +SYM_TYPED_FUNC_START(arm926_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm926_dma_clean_range bcs arm926_dma_inv_range b arm926_dma_flush_range -ENDPROC(arm926_dma_map_area) +SYM_FUNC_END(arm926_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -321,17 +332,11 @@ ENDPROC(arm926_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm926_dma_unmap_area) +SYM_TYPED_FUNC_START(arm926_dma_unmap_area) ret lr -ENDPROC(arm926_dma_unmap_area) - - .globl arm926_flush_kern_cache_louis - .equ arm926_flush_kern_cache_louis, arm926_flush_kern_cache_all +SYM_FUNC_END(arm926_dma_unmap_area) - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm926 - -ENTRY(cpu_arm926_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm926_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE @@ -340,6 +345,7 @@ ENTRY(cpu_arm926_dcache_clean_area) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(cpu_arm926_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -351,7 +357,8 @@ ENTRY(cpu_arm926_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_arm926_switch_mm) + +SYM_TYPED_FUNC_START(cpu_arm926_switch_mm) #ifdef CONFIG_MMU mov ip, #0 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -367,6 +374,7 @@ ENTRY(cpu_arm926_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif ret lr +SYM_FUNC_END(cpu_arm926_switch_mm) /* * cpu_arm926_set_pte_ext(ptep, pte, ext) @@ -374,7 +382,7 @@ ENTRY(cpu_arm926_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm926_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_arm926_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -384,21 +392,22 @@ ENTRY(cpu_arm926_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif ret lr +SYM_FUNC_END(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size .equ cpu_arm926_suspend_size, 4 * 3 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_arm926_do_suspend) +SYM_TYPED_FUNC_START(cpu_arm926_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID mrc p15, 0, r5, c3, c0, 0 @ Domain ID mrc p15, 0, r6, c1, c0, 0 @ Control register stmia r0, {r4 - r6} ldmfd sp!, {r4 - r6, pc} -ENDPROC(cpu_arm926_do_suspend) +SYM_FUNC_END(cpu_arm926_do_suspend) -ENTRY(cpu_arm926_do_resume) +SYM_TYPED_FUNC_START(cpu_arm926_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches @@ -408,7 +417,7 @@ ENTRY(cpu_arm926_do_resume) mcr p15, 0, r1, c2, c0, 0 @ TTB address mov r0, r6 @ control register b cpu_resume_mmu -ENDPROC(cpu_arm926_do_resume) +SYM_FUNC_END(cpu_arm926_do_resume) #endif .type __arm926_setup, #function diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index cf9bfcc825ca..0d30bb25c42b 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -25,19 +26,24 @@ * * These are not required. */ -ENTRY(cpu_arm940_proc_init) -ENTRY(cpu_arm940_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm940_proc_init) ret lr +SYM_FUNC_END(cpu_arm940_proc_init) + +SYM_TYPED_FUNC_START(cpu_arm940_switch_mm) + ret lr +SYM_FUNC_END(cpu_arm940_switch_mm) /* * cpu_arm940_proc_fin() */ -ENTRY(cpu_arm940_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm940_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm940_proc_fin) /* * cpu_arm940_reset(loc) @@ -45,7 +51,7 @@ ENTRY(cpu_arm940_proc_fin) * Notes : This sets up everything for a reset */ .pushsection .idmap.text, "ax" -ENTRY(cpu_arm940_reset) +SYM_TYPED_FUNC_START(cpu_arm940_reset) mov ip, #0 mcr p15, 0, ip, c7, c5, 0 @ flush I cache mcr p15, 0, ip, c7, c6, 0 @ flush D cache @@ -55,42 +61,43 @@ ENTRY(cpu_arm940_reset) bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm940_reset) +SYM_FUNC_END(cpu_arm940_reset) .popsection /* * cpu_arm940_do_idle() */ .align 5 -ENTRY(cpu_arm940_do_idle) +SYM_TYPED_FUNC_START(cpu_arm940_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr +SYM_FUNC_END(cpu_arm940_do_idle) /* * flush_icache_all() * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm940_flush_icache_all) +SYM_TYPED_FUNC_START(arm940_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(arm940_flush_icache_all) +SYM_FUNC_END(arm940_flush_icache_all) /* * flush_user_cache_all() */ -ENTRY(arm940_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm940_flush_user_cache_all, arm940_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm940_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm940_flush_kern_cache_all) mov r2, #VM_EXEC - /* FALLTHROUGH */ + b arm940_flush_user_cache_range +SYM_FUNC_END(arm940_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -102,7 +109,7 @@ ENTRY(arm940_flush_kern_cache_all) * - end - end address (exclusive) * - flags - vm_flags describing address space */ -ENTRY(arm940_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm940_flush_user_cache_range) mov ip, #0 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, ip, c7, c6, 0 @ flush D cache @@ -119,6 +126,7 @@ ENTRY(arm940_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm940_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -130,8 +138,9 @@ ENTRY(arm940_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm940_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm940_coherent_kern_range) + b arm940_flush_kern_dcache_area +SYM_FUNC_END(arm940_coherent_kern_range) /* * coherent_user_range(start, end) @@ -143,8 +152,11 @@ ENTRY(arm940_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm940_coherent_user_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm940_coherent_user_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm940_flush_kern_dcache_area +#endif +SYM_FUNC_END(arm940_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -155,7 +167,7 @@ ENTRY(arm940_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(arm940_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm940_flush_kern_dcache_area) mov r0, #0 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries @@ -167,6 +179,7 @@ ENTRY(arm940_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm940_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -199,7 +212,7 @@ arm940_dma_inv_range: * - end - virtual end address */ arm940_dma_clean_range: -ENTRY(cpu_arm940_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm940_dcache_clean_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments @@ -212,6 +225,7 @@ ENTRY(cpu_arm940_dcache_clean_area) #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(cpu_arm940_dcache_clean_area) /* * dma_flush_range(start, end) @@ -222,7 +236,7 @@ ENTRY(cpu_arm940_dcache_clean_area) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm940_dma_flush_range) +SYM_TYPED_FUNC_START(arm940_dma_flush_range) mov ip, #0 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries @@ -238,6 +252,7 @@ ENTRY(arm940_dma_flush_range) bcs 1b @ segments 7 to 0 mcr p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm940_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -245,13 +260,13 @@ ENTRY(arm940_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm940_dma_map_area) +SYM_TYPED_FUNC_START(arm940_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm940_dma_clean_range bcs arm940_dma_inv_range b arm940_dma_flush_range -ENDPROC(arm940_dma_map_area) +SYM_FUNC_END(arm940_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -259,15 +274,9 @@ ENDPROC(arm940_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm940_dma_unmap_area) +SYM_TYPED_FUNC_START(arm940_dma_unmap_area) ret lr -ENDPROC(arm940_dma_unmap_area) - - .globl arm940_flush_kern_cache_louis - .equ arm940_flush_kern_cache_louis, arm940_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm940 +SYM_FUNC_END(arm940_dma_unmap_area) .type __arm940_setup, #function __arm940_setup: diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 6fb3898ad1cd..27750ace2ced 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -8,6 +8,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -32,19 +33,24 @@ * * These are not required. */ -ENTRY(cpu_arm946_proc_init) -ENTRY(cpu_arm946_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm946_proc_init) ret lr +SYM_FUNC_END(cpu_arm946_proc_init) + +SYM_TYPED_FUNC_START(cpu_arm946_switch_mm) + ret lr +SYM_FUNC_END(cpu_arm946_switch_mm) /* * cpu_arm946_proc_fin() */ -ENTRY(cpu_arm946_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm946_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_arm946_proc_fin) /* * cpu_arm946_reset(loc) @@ -52,7 +58,7 @@ ENTRY(cpu_arm946_proc_fin) * Notes : This sets up everything for a reset */ .pushsection .idmap.text, "ax" -ENTRY(cpu_arm946_reset) +SYM_TYPED_FUNC_START(cpu_arm946_reset) mov ip, #0 mcr p15, 0, ip, c7, c5, 0 @ flush I cache mcr p15, 0, ip, c7, c6, 0 @ flush D cache @@ -62,40 +68,40 @@ ENTRY(cpu_arm946_reset) bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_arm946_reset) +SYM_FUNC_END(cpu_arm946_reset) .popsection /* * cpu_arm946_do_idle() */ .align 5 -ENTRY(cpu_arm946_do_idle) +SYM_TYPED_FUNC_START(cpu_arm946_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr +SYM_FUNC_END(cpu_arm946_do_idle) /* * flush_icache_all() * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(arm946_flush_icache_all) +SYM_TYPED_FUNC_START(arm946_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(arm946_flush_icache_all) +SYM_FUNC_END(arm946_flush_icache_all) /* * flush_user_cache_all() */ -ENTRY(arm946_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(arm946_flush_user_cache_all, arm946_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(arm946_flush_kern_cache_all) +SYM_TYPED_FUNC_START(arm946_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -114,6 +120,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ flush I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm946_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -126,7 +133,7 @@ __flush_whole_cache: * - flags - vm_flags describing address space * (same as arm926) */ -ENTRY(arm946_flush_user_cache_range) +SYM_TYPED_FUNC_START(arm946_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -153,6 +160,7 @@ ENTRY(arm946_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm946_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -164,8 +172,11 @@ ENTRY(arm946_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(arm946_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(arm946_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b arm946_coherent_user_range +#endif +SYM_FUNC_END(arm946_coherent_kern_range) /* * coherent_user_range(start, end) @@ -178,7 +189,7 @@ ENTRY(arm946_coherent_kern_range) * - end - virtual end address * (same as arm926) */ -ENTRY(arm946_coherent_user_range) +SYM_TYPED_FUNC_START(arm946_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -188,6 +199,7 @@ ENTRY(arm946_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(arm946_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -199,7 +211,7 @@ ENTRY(arm946_coherent_user_range) * - size - region size * (same as arm926) */ -ENTRY(arm946_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(arm946_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -209,6 +221,7 @@ ENTRY(arm946_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm946_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -268,7 +281,7 @@ arm946_dma_clean_range: * * (same as arm926) */ -ENTRY(arm946_dma_flush_range) +SYM_TYPED_FUNC_START(arm946_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -281,6 +294,7 @@ ENTRY(arm946_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(arm946_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -288,13 +302,13 @@ ENTRY(arm946_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(arm946_dma_map_area) +SYM_TYPED_FUNC_START(arm946_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq arm946_dma_clean_range bcs arm946_dma_inv_range b arm946_dma_flush_range -ENDPROC(arm946_dma_map_area) +SYM_FUNC_END(arm946_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -302,17 +316,11 @@ ENDPROC(arm946_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(arm946_dma_unmap_area) +SYM_TYPED_FUNC_START(arm946_dma_unmap_area) ret lr -ENDPROC(arm946_dma_unmap_area) - - .globl arm946_flush_kern_cache_louis - .equ arm946_flush_kern_cache_louis, arm946_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm946 +SYM_FUNC_END(arm946_dma_unmap_area) -ENTRY(cpu_arm946_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_arm946_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE @@ -321,6 +329,7 @@ ENTRY(cpu_arm946_dcache_clean_area) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(cpu_arm946_dcache_clean_area) .type __arm946_setup, #function __arm946_setup: diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index a054c0e9c034..c480a8400eff 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -6,6 +6,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -24,17 +25,28 @@ * * These are not required. */ -ENTRY(cpu_arm9tdmi_proc_init) -ENTRY(cpu_arm9tdmi_do_idle) -ENTRY(cpu_arm9tdmi_dcache_clean_area) -ENTRY(cpu_arm9tdmi_switch_mm) +SYM_TYPED_FUNC_START(cpu_arm9tdmi_proc_init) ret lr +SYM_FUNC_END(cpu_arm9tdmi_proc_init) + +SYM_TYPED_FUNC_START(cpu_arm9tdmi_do_idle) + ret lr +SYM_FUNC_END(cpu_arm9tdmi_do_idle) + +SYM_TYPED_FUNC_START(cpu_arm9tdmi_dcache_clean_area) + ret lr +SYM_FUNC_END(cpu_arm9tdmi_dcache_clean_area) + +SYM_TYPED_FUNC_START(cpu_arm9tdmi_switch_mm) + ret lr +SYM_FUNC_END(cpu_arm9tdmi_switch_mm) /* * cpu_arm9tdmi_proc_fin() */ -ENTRY(cpu_arm9tdmi_proc_fin) +SYM_TYPED_FUNC_START(cpu_arm9tdmi_proc_fin) ret lr +SYM_FUNC_END(cpu_arm9tdmi_proc_fin) /* * Function: cpu_arm9tdmi_reset(loc) @@ -42,9 +54,9 @@ ENTRY(cpu_arm9tdmi_proc_fin) * Purpose : Sets up everything for a reset and jump to the location for soft reset. */ .pushsection .idmap.text, "ax" -ENTRY(cpu_arm9tdmi_reset) +SYM_TYPED_FUNC_START(cpu_arm9tdmi_reset) ret r0 -ENDPROC(cpu_arm9tdmi_reset) +SYM_FUNC_END(cpu_arm9tdmi_reset) .popsection .type __arm9tdmi_setup, #function diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 2c73e0d47d08..7c16ccac8a05 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -26,13 +27,14 @@ /* * cpu_fa526_proc_init() */ -ENTRY(cpu_fa526_proc_init) +SYM_TYPED_FUNC_START(cpu_fa526_proc_init) ret lr +SYM_FUNC_END(cpu_fa526_proc_init) /* * cpu_fa526_proc_fin() */ -ENTRY(cpu_fa526_proc_fin) +SYM_TYPED_FUNC_START(cpu_fa526_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. @@ -40,6 +42,7 @@ ENTRY(cpu_fa526_proc_fin) nop nop ret lr +SYM_FUNC_END(cpu_fa526_proc_fin) /* * cpu_fa526_reset(loc) @@ -52,7 +55,7 @@ ENTRY(cpu_fa526_proc_fin) */ .align 4 .pushsection .idmap.text, "ax" -ENTRY(cpu_fa526_reset) +SYM_TYPED_FUNC_START(cpu_fa526_reset) /* TODO: Use CP8 if possible... */ mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -68,24 +71,25 @@ ENTRY(cpu_fa526_reset) nop nop ret r0 -ENDPROC(cpu_fa526_reset) +SYM_FUNC_END(cpu_fa526_reset) .popsection /* * cpu_fa526_do_idle() */ .align 4 -ENTRY(cpu_fa526_do_idle) +SYM_TYPED_FUNC_START(cpu_fa526_do_idle) ret lr +SYM_FUNC_END(cpu_fa526_do_idle) - -ENTRY(cpu_fa526_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_fa526_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE subs r1, r1, #CACHE_DLINESIZE bhi 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(cpu_fa526_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -97,7 +101,7 @@ ENTRY(cpu_fa526_dcache_clean_area) * pgd: new page tables */ .align 4 -ENTRY(cpu_fa526_switch_mm) +SYM_TYPED_FUNC_START(cpu_fa526_switch_mm) #ifdef CONFIG_MMU mov ip, #0 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -113,6 +117,7 @@ ENTRY(cpu_fa526_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB #endif ret lr +SYM_FUNC_END(cpu_fa526_switch_mm) /* * cpu_fa526_set_pte_ext(ptep, pte, ext) @@ -120,7 +125,7 @@ ENTRY(cpu_fa526_switch_mm) * Set a PTE and flush it out */ .align 4 -ENTRY(cpu_fa526_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_fa526_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -129,6 +134,7 @@ ENTRY(cpu_fa526_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif ret lr +SYM_FUNC_END(cpu_fa526_set_pte_ext) .type __fa526_setup, #function __fa526_setup: diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 072ff9b451f8..f67b2ffac854 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -8,6 +8,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -43,7 +44,7 @@ __cache_params: /* * cpu_feroceon_proc_init() */ -ENTRY(cpu_feroceon_proc_init) +SYM_TYPED_FUNC_START(cpu_feroceon_proc_init) mrc p15, 0, r0, c0, c0, 1 @ read cache type register ldr r1, __cache_params mov r2, #(16 << 5) @@ -61,11 +62,12 @@ ENTRY(cpu_feroceon_proc_init) str_l r1, VFP_arch_feroceon, r2 #endif ret lr +SYM_FUNC_END(cpu_feroceon_proc_init) /* * cpu_feroceon_proc_fin() */ -ENTRY(cpu_feroceon_proc_fin) +SYM_TYPED_FUNC_START(cpu_feroceon_proc_fin) #if defined(CONFIG_CACHE_FEROCEON_L2) && \ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) mov r0, #0 @@ -78,6 +80,7 @@ ENTRY(cpu_feroceon_proc_fin) bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_feroceon_proc_fin) /* * cpu_feroceon_reset(loc) @@ -90,7 +93,7 @@ ENTRY(cpu_feroceon_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_feroceon_reset) +SYM_TYPED_FUNC_START(cpu_feroceon_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -102,7 +105,7 @@ ENTRY(cpu_feroceon_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_feroceon_reset) +SYM_FUNC_END(cpu_feroceon_reset) .popsection /* @@ -111,22 +114,23 @@ ENDPROC(cpu_feroceon_reset) * Called with IRQs disabled */ .align 5 -ENTRY(cpu_feroceon_do_idle) +SYM_TYPED_FUNC_START(cpu_feroceon_do_idle) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt ret lr +SYM_FUNC_END(cpu_feroceon_do_idle) /* * flush_icache_all() * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(feroceon_flush_icache_all) +SYM_TYPED_FUNC_START(feroceon_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(feroceon_flush_icache_all) +SYM_FUNC_END(feroceon_flush_icache_all) /* * flush_user_cache_all() @@ -135,15 +139,14 @@ ENDPROC(feroceon_flush_icache_all) * address space. */ .align 5 -ENTRY(feroceon_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(feroceon_flush_user_cache_all, feroceon_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(feroceon_flush_kern_cache_all) +SYM_TYPED_FUNC_START(feroceon_flush_kern_cache_all) mov r2, #VM_EXEC __flush_whole_cache: @@ -161,6 +164,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(feroceon_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -173,7 +177,7 @@ __flush_whole_cache: * - flags - vm_flags describing address space */ .align 5 -ENTRY(feroceon_flush_user_cache_range) +SYM_TYPED_FUNC_START(feroceon_flush_user_cache_range) sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT bgt __flush_whole_cache @@ -190,6 +194,7 @@ ENTRY(feroceon_flush_user_cache_range) mov ip, #0 mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(feroceon_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -202,8 +207,11 @@ ENTRY(feroceon_flush_user_cache_range) * - end - virtual end address */ .align 5 -ENTRY(feroceon_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(feroceon_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b feroceon_coherent_user_range +#endif +SYM_FUNC_END(feroceon_coherent_kern_range) /* * coherent_user_range(start, end) @@ -215,7 +223,7 @@ ENTRY(feroceon_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(feroceon_coherent_user_range) +SYM_TYPED_FUNC_START(feroceon_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -225,6 +233,7 @@ ENTRY(feroceon_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(feroceon_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -236,7 +245,7 @@ ENTRY(feroceon_coherent_user_range) * - size - region size */ .align 5 -ENTRY(feroceon_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(feroceon_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -246,9 +255,10 @@ ENTRY(feroceon_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(feroceon_flush_kern_dcache_area) .align 5 -ENTRY(feroceon_range_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(feroceon_range_flush_kern_dcache_area) mrs r2, cpsr add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive orr r3, r2, #PSR_I_BIT @@ -260,6 +270,7 @@ ENTRY(feroceon_range_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(feroceon_range_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -346,7 +357,7 @@ feroceon_range_dma_clean_range: * - end - virtual end address */ .align 5 -ENTRY(feroceon_dma_flush_range) +SYM_TYPED_FUNC_START(feroceon_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -354,9 +365,10 @@ ENTRY(feroceon_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(feroceon_dma_flush_range) .align 5 -ENTRY(feroceon_range_dma_flush_range) +SYM_TYPED_FUNC_START(feroceon_range_dma_flush_range) mrs r2, cpsr cmp r1, r0 subne r1, r1, #1 @ top address is inclusive @@ -367,6 +379,7 @@ ENTRY(feroceon_range_dma_flush_range) msr cpsr_c, r2 @ restore interrupts mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(feroceon_range_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -374,13 +387,13 @@ ENTRY(feroceon_range_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(feroceon_dma_map_area) +SYM_TYPED_FUNC_START(feroceon_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq feroceon_dma_clean_range bcs feroceon_dma_inv_range b feroceon_dma_flush_range -ENDPROC(feroceon_dma_map_area) +SYM_FUNC_END(feroceon_dma_map_area) /* * dma_map_area(start, size, dir) @@ -388,13 +401,13 @@ ENDPROC(feroceon_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(feroceon_range_dma_map_area) +SYM_TYPED_FUNC_START(feroceon_range_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq feroceon_range_dma_clean_range bcs feroceon_range_dma_inv_range b feroceon_range_dma_flush_range -ENDPROC(feroceon_range_dma_map_area) +SYM_FUNC_END(feroceon_range_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -402,39 +415,12 @@ ENDPROC(feroceon_range_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(feroceon_dma_unmap_area) +SYM_TYPED_FUNC_START(feroceon_dma_unmap_area) ret lr -ENDPROC(feroceon_dma_unmap_area) - - .globl feroceon_flush_kern_cache_louis - .equ feroceon_flush_kern_cache_louis, feroceon_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions feroceon - -.macro range_alias basename - .globl feroceon_range_\basename - .type feroceon_range_\basename , %function - .equ feroceon_range_\basename , feroceon_\basename -.endm - -/* - * Most of the cache functions are unchanged for this case. - * Export suitable alias symbols for the unchanged functions: - */ - range_alias flush_icache_all - range_alias flush_user_cache_all - range_alias flush_kern_cache_all - range_alias flush_kern_cache_louis - range_alias flush_user_cache_range - range_alias coherent_kern_range - range_alias coherent_user_range - range_alias dma_unmap_area - - define_cache_functions feroceon_range +SYM_FUNC_END(feroceon_dma_unmap_area) .align 5 -ENTRY(cpu_feroceon_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_feroceon_dcache_clean_area) #if defined(CONFIG_CACHE_FEROCEON_L2) && \ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) mov r2, r0 @@ -453,6 +439,7 @@ ENTRY(cpu_feroceon_dcache_clean_area) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(cpu_feroceon_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -464,7 +451,7 @@ ENTRY(cpu_feroceon_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_feroceon_switch_mm) +SYM_TYPED_FUNC_START(cpu_feroceon_switch_mm) #ifdef CONFIG_MMU /* * Note: we wish to call __flush_whole_cache but we need to preserve @@ -485,6 +472,7 @@ ENTRY(cpu_feroceon_switch_mm) #else ret lr #endif +SYM_FUNC_END(cpu_feroceon_switch_mm) /* * cpu_feroceon_set_pte_ext(ptep, pte, ext) @@ -492,7 +480,7 @@ ENTRY(cpu_feroceon_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_feroceon_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_feroceon_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext wc_disable=0 mov r0, r0 @@ -504,21 +492,22 @@ ENTRY(cpu_feroceon_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif ret lr +SYM_FUNC_END(cpu_feroceon_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mm/proc-arm926.S */ .globl cpu_feroceon_suspend_size .equ cpu_feroceon_suspend_size, 4 * 3 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_feroceon_do_suspend) +SYM_TYPED_FUNC_START(cpu_feroceon_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID mrc p15, 0, r5, c3, c0, 0 @ Domain ID mrc p15, 0, r6, c1, c0, 0 @ Control register stmia r0, {r4 - r6} ldmfd sp!, {r4 - r6, pc} -ENDPROC(cpu_feroceon_do_suspend) +SYM_FUNC_END(cpu_feroceon_do_suspend) -ENTRY(cpu_feroceon_do_resume) +SYM_TYPED_FUNC_START(cpu_feroceon_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches @@ -528,7 +517,7 @@ ENTRY(cpu_feroceon_do_resume) mcr p15, 0, r1, c2, c0, 0 @ TTB address mov r0, r6 @ control register b cpu_resume_mmu -ENDPROC(cpu_feroceon_do_resume) +SYM_FUNC_END(cpu_feroceon_do_resume) #endif .type __feroceon_setup, #function diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index e43f6d716b4b..e388c4cc0c44 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -320,39 +320,6 @@ ENTRY(\name\()_processor_functions) #endif .endm -.macro define_cache_functions name:req - .align 2 - .type \name\()_cache_fns, #object -ENTRY(\name\()_cache_fns) - .long \name\()_flush_icache_all - .long \name\()_flush_kern_cache_all - .long \name\()_flush_kern_cache_louis - .long \name\()_flush_user_cache_all - .long \name\()_flush_user_cache_range - .long \name\()_coherent_kern_range - .long \name\()_coherent_user_range - .long \name\()_flush_kern_dcache_area - .long \name\()_dma_map_area - .long \name\()_dma_unmap_area - .long \name\()_dma_flush_range - .size \name\()_cache_fns, . - \name\()_cache_fns -.endm - -.macro define_tlb_functions name:req, flags_up:req, flags_smp - .type \name\()_tlb_fns, #object - .align 2 -ENTRY(\name\()_tlb_fns) - .long \name\()_flush_user_tlb_range - .long \name\()_flush_kern_tlb_range - .ifnb \flags_smp - ALT_SMP(.long \flags_smp ) - ALT_UP(.long \flags_up ) - .else - .long \flags_up - .endif - .size \name\()_tlb_fns, . - \name\()_tlb_fns -.endm - .macro globl_equ x, y .globl \x .equ \x, \y diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 1645ccaffe96..8e9f38da863a 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -9,6 +9,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -31,18 +32,20 @@ /* * cpu_mohawk_proc_init() */ -ENTRY(cpu_mohawk_proc_init) +SYM_TYPED_FUNC_START(cpu_mohawk_proc_init) ret lr +SYM_FUNC_END(cpu_mohawk_proc_init) /* * cpu_mohawk_proc_fin() */ -ENTRY(cpu_mohawk_proc_fin) +SYM_TYPED_FUNC_START(cpu_mohawk_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...iz........... bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_mohawk_proc_fin) /* * cpu_mohawk_reset(loc) @@ -57,7 +60,7 @@ ENTRY(cpu_mohawk_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_mohawk_reset) +SYM_TYPED_FUNC_START(cpu_mohawk_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -67,7 +70,7 @@ ENTRY(cpu_mohawk_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_mohawk_reset) +SYM_FUNC_END(cpu_mohawk_reset) .popsection /* @@ -76,22 +79,23 @@ ENDPROC(cpu_mohawk_reset) * Called with IRQs disabled */ .align 5 -ENTRY(cpu_mohawk_do_idle) +SYM_TYPED_FUNC_START(cpu_mohawk_do_idle) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt ret lr +SYM_FUNC_END(cpu_mohawk_do_idle) /* * flush_icache_all() * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(mohawk_flush_icache_all) +SYM_TYPED_FUNC_START(mohawk_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(mohawk_flush_icache_all) +SYM_FUNC_END(mohawk_flush_icache_all) /* * flush_user_cache_all() @@ -99,15 +103,14 @@ ENDPROC(mohawk_flush_icache_all) * Clean and invalidate all cache entries in a particular * address space. */ -ENTRY(mohawk_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(mohawk_flush_user_cache_all, mohawk_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(mohawk_flush_kern_cache_all) +SYM_TYPED_FUNC_START(mohawk_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -116,6 +119,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer ret lr +SYM_FUNC_END(mohawk_flush_kern_cache_all) /* * flush_user_cache_range(start, end, flags) @@ -129,7 +133,7 @@ __flush_whole_cache: * * (same as arm926) */ -ENTRY(mohawk_flush_user_cache_range) +SYM_TYPED_FUNC_START(mohawk_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @@ -146,6 +150,7 @@ ENTRY(mohawk_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(mohawk_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -157,8 +162,11 @@ ENTRY(mohawk_flush_user_cache_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(mohawk_coherent_kern_range) - /* FALLTHROUGH */ +SYM_TYPED_FUNC_START(mohawk_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b mohawk_coherent_user_range +#endif +SYM_FUNC_END(mohawk_coherent_kern_range) /* * coherent_user_range(start, end) @@ -172,7 +180,7 @@ ENTRY(mohawk_coherent_kern_range) * * (same as arm926) */ -ENTRY(mohawk_coherent_user_range) +SYM_TYPED_FUNC_START(mohawk_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry @@ -182,6 +190,7 @@ ENTRY(mohawk_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 ret lr +SYM_FUNC_END(mohawk_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -192,7 +201,7 @@ ENTRY(mohawk_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(mohawk_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(mohawk_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE @@ -202,6 +211,7 @@ ENTRY(mohawk_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(mohawk_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -256,7 +266,7 @@ mohawk_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(mohawk_dma_flush_range) +SYM_TYPED_FUNC_START(mohawk_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry @@ -265,6 +275,7 @@ ENTRY(mohawk_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(mohawk_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -272,13 +283,13 @@ ENTRY(mohawk_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(mohawk_dma_map_area) +SYM_TYPED_FUNC_START(mohawk_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq mohawk_dma_clean_range bcs mohawk_dma_inv_range b mohawk_dma_flush_range -ENDPROC(mohawk_dma_map_area) +SYM_FUNC_END(mohawk_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -286,23 +297,18 @@ ENDPROC(mohawk_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(mohawk_dma_unmap_area) +SYM_TYPED_FUNC_START(mohawk_dma_unmap_area) ret lr -ENDPROC(mohawk_dma_unmap_area) - - .globl mohawk_flush_kern_cache_louis - .equ mohawk_flush_kern_cache_louis, mohawk_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions mohawk +SYM_FUNC_END(mohawk_dma_unmap_area) -ENTRY(cpu_mohawk_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_mohawk_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE subs r1, r1, #CACHE_DLINESIZE bhi 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +SYM_FUNC_END(cpu_mohawk_dcache_clean_area) /* * cpu_mohawk_switch_mm(pgd) @@ -312,7 +318,7 @@ ENTRY(cpu_mohawk_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_mohawk_switch_mm) +SYM_TYPED_FUNC_START(cpu_mohawk_switch_mm) mov ip, #0 mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache @@ -321,6 +327,7 @@ ENTRY(cpu_mohawk_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ret lr +SYM_FUNC_END(cpu_mohawk_switch_mm) /* * cpu_mohawk_set_pte_ext(ptep, pte, ext) @@ -328,7 +335,7 @@ ENTRY(cpu_mohawk_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_mohawk_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_mohawk_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 @@ -336,11 +343,12 @@ ENTRY(cpu_mohawk_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr #endif +SYM_FUNC_END(cpu_mohawk_set_pte_ext) .globl cpu_mohawk_suspend_size .equ cpu_mohawk_suspend_size, 4 * 6 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_mohawk_do_suspend) +SYM_TYPED_FUNC_START(cpu_mohawk_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg @@ -351,9 +359,9 @@ ENTRY(cpu_mohawk_do_suspend) bic r4, r4, #2 @ clear frequency change bit stmia r0, {r4 - r9} @ store cp regs ldmia sp!, {r4 - r9, pc} -ENDPROC(cpu_mohawk_do_suspend) +SYM_FUNC_END(cpu_mohawk_do_suspend) -ENTRY(cpu_mohawk_do_resume) +SYM_TYPED_FUNC_START(cpu_mohawk_do_resume) ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB @@ -369,7 +377,7 @@ ENTRY(cpu_mohawk_do_resume) mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg mov r0, r9 @ control register b cpu_resume_mmu -ENDPROC(cpu_mohawk_do_resume) +SYM_FUNC_END(cpu_mohawk_do_resume) #endif .type __mohawk_setup, #function diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 4071f7a61cb6..3da76fab8ac3 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -12,6 +12,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -32,15 +33,16 @@ /* * cpu_sa110_proc_init() */ -ENTRY(cpu_sa110_proc_init) +SYM_TYPED_FUNC_START(cpu_sa110_proc_init) mov r0, #0 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching ret lr +SYM_FUNC_END(cpu_sa110_proc_init) /* * cpu_sa110_proc_fin() */ -ENTRY(cpu_sa110_proc_fin) +SYM_TYPED_FUNC_START(cpu_sa110_proc_fin) mov r0, #0 mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching mrc p15, 0, r0, c1, c0, 0 @ ctrl register @@ -48,6 +50,7 @@ ENTRY(cpu_sa110_proc_fin) bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_sa110_proc_fin) /* * cpu_sa110_reset(loc) @@ -60,7 +63,7 @@ ENTRY(cpu_sa110_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_sa110_reset) +SYM_TYPED_FUNC_START(cpu_sa110_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -72,7 +75,7 @@ ENTRY(cpu_sa110_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_sa110_reset) +SYM_FUNC_END(cpu_sa110_reset) .popsection /* @@ -88,7 +91,7 @@ ENDPROC(cpu_sa110_reset) */ .align 5 -ENTRY(cpu_sa110_do_idle) +SYM_TYPED_FUNC_START(cpu_sa110_do_idle) mcr p15, 0, ip, c15, c2, 2 @ disable clock switching ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc ldr r1, [r1, #0] @ force switch to MCLK @@ -101,6 +104,7 @@ ENTRY(cpu_sa110_do_idle) mov r0, r0 @ safety mcr p15, 0, r0, c15, c1, 2 @ enable clock switching ret lr +SYM_FUNC_END(cpu_sa110_do_idle) /* ================================= CACHE ================================ */ @@ -113,12 +117,13 @@ ENTRY(cpu_sa110_do_idle) * addr: cache-unaligned virtual address */ .align 5 -ENTRY(cpu_sa110_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_sa110_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #DCACHELINESIZE subs r1, r1, #DCACHELINESIZE bhi 1b ret lr +SYM_FUNC_END(cpu_sa110_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -130,7 +135,7 @@ ENTRY(cpu_sa110_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_sa110_switch_mm) +SYM_TYPED_FUNC_START(cpu_sa110_switch_mm) #ifdef CONFIG_MMU str lr, [sp, #-4]! bl v4wb_flush_kern_cache_all @ clears IP @@ -140,6 +145,7 @@ ENTRY(cpu_sa110_switch_mm) #else ret lr #endif +SYM_FUNC_END(cpu_sa110_switch_mm) /* * cpu_sa110_set_pte_ext(ptep, pte, ext) @@ -147,7 +153,7 @@ ENTRY(cpu_sa110_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_sa110_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_sa110_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext wc_disable=0 mov r0, r0 @@ -155,6 +161,7 @@ ENTRY(cpu_sa110_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif ret lr +SYM_FUNC_END(cpu_sa110_set_pte_ext) .type __sa110_setup, #function __sa110_setup: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index e723bd4119d3..7c496195e440 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -17,6 +17,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -36,11 +37,12 @@ /* * cpu_sa1100_proc_init() */ -ENTRY(cpu_sa1100_proc_init) +SYM_TYPED_FUNC_START(cpu_sa1100_proc_init) mov r0, #0 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland ret lr +SYM_FUNC_END(cpu_sa1100_proc_init) /* * cpu_sa1100_proc_fin() @@ -49,13 +51,14 @@ ENTRY(cpu_sa1100_proc_init) * - Disable interrupts * - Clean and turn off caches. */ -ENTRY(cpu_sa1100_proc_fin) +SYM_TYPED_FUNC_START(cpu_sa1100_proc_fin) mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_sa1100_proc_fin) /* * cpu_sa1100_reset(loc) @@ -68,7 +71,7 @@ ENTRY(cpu_sa1100_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_sa1100_reset) +SYM_TYPED_FUNC_START(cpu_sa1100_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB @@ -80,7 +83,7 @@ ENTRY(cpu_sa1100_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ret r0 -ENDPROC(cpu_sa1100_reset) +SYM_FUNC_END(cpu_sa1100_reset) .popsection /* @@ -95,7 +98,7 @@ ENDPROC(cpu_sa1100_reset) * 3 = switch to fast processor clock */ .align 5 -ENTRY(cpu_sa1100_do_idle) +SYM_TYPED_FUNC_START(cpu_sa1100_do_idle) mov r0, r0 @ 4 nop padding mov r0, r0 mov r0, r0 @@ -111,6 +114,7 @@ ENTRY(cpu_sa1100_do_idle) mov r0, r0 @ safety mcr p15, 0, r0, c15, c1, 2 @ enable clock switching ret lr +SYM_FUNC_END(cpu_sa1100_do_idle) /* ================================= CACHE ================================ */ @@ -123,12 +127,13 @@ ENTRY(cpu_sa1100_do_idle) * addr: cache-unaligned virtual address */ .align 5 -ENTRY(cpu_sa1100_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_sa1100_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #DCACHELINESIZE subs r1, r1, #DCACHELINESIZE bhi 1b ret lr +SYM_FUNC_END(cpu_sa1100_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -140,7 +145,7 @@ ENTRY(cpu_sa1100_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_sa1100_switch_mm) +SYM_TYPED_FUNC_START(cpu_sa1100_switch_mm) #ifdef CONFIG_MMU str lr, [sp, #-4]! bl v4wb_flush_kern_cache_all @ clears IP @@ -151,6 +156,7 @@ ENTRY(cpu_sa1100_switch_mm) #else ret lr #endif +SYM_FUNC_END(cpu_sa1100_switch_mm) /* * cpu_sa1100_set_pte_ext(ptep, pte, ext) @@ -158,7 +164,7 @@ ENTRY(cpu_sa1100_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_sa1100_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_sa1100_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext wc_disable=0 mov r0, r0 @@ -166,20 +172,21 @@ ENTRY(cpu_sa1100_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif ret lr +SYM_FUNC_END(cpu_sa1100_set_pte_ext) .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4 * 3 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_sa1100_do_suspend) +SYM_TYPED_FUNC_START(cpu_sa1100_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID mrc p15, 0, r5, c13, c0, 0 @ PID mrc p15, 0, r6, c1, c0, 0 @ control reg stmia r0, {r4 - r6} @ store cp regs ldmfd sp!, {r4 - r6, pc} -ENDPROC(cpu_sa1100_do_suspend) +SYM_FUNC_END(cpu_sa1100_do_suspend) -ENTRY(cpu_sa1100_do_resume) +SYM_TYPED_FUNC_START(cpu_sa1100_do_resume) ldmia r0, {r4 - r6} @ load cp regs mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs @@ -192,7 +199,7 @@ ENTRY(cpu_sa1100_do_resume) mcr p15, 0, r5, c13, c0, 0 @ PID mov r0, r6 @ control register b cpu_resume_mmu -ENDPROC(cpu_sa1100_do_resume) +SYM_FUNC_END(cpu_sa1100_do_resume) #endif .type __sa1100_setup, #function diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 203dff89ab1a..90a01f5950b9 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -8,6 +8,7 @@ * This is the "shell" of the ARMv6 processor support. */ #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/linkage.h> #include <linux/pgtable.h> #include <asm/assembler.h> @@ -34,15 +35,17 @@ .arch armv6 -ENTRY(cpu_v6_proc_init) +SYM_TYPED_FUNC_START(cpu_v6_proc_init) ret lr +SYM_FUNC_END(cpu_v6_proc_init) -ENTRY(cpu_v6_proc_fin) +SYM_TYPED_FUNC_START(cpu_v6_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_v6_proc_fin) /* * cpu_v6_reset(loc) @@ -55,14 +58,14 @@ ENTRY(cpu_v6_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_v6_reset) +SYM_TYPED_FUNC_START(cpu_v6_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m mcr p15, 0, r1, c1, c0, 0 @ disable MMU mov r1, #0 mcr p15, 0, r1, c7, c5, 4 @ ISB ret r0 -ENDPROC(cpu_v6_reset) +SYM_FUNC_END(cpu_v6_reset) .popsection /* @@ -72,18 +75,20 @@ ENDPROC(cpu_v6_reset) * * IRQs are already disabled. */ -ENTRY(cpu_v6_do_idle) +SYM_TYPED_FUNC_START(cpu_v6_do_idle) mov r1, #0 mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt ret lr +SYM_FUNC_END(cpu_v6_do_idle) -ENTRY(cpu_v6_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_v6_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #D_CACHE_LINE_SIZE subs r1, r1, #D_CACHE_LINE_SIZE bhi 1b ret lr +SYM_FUNC_END(cpu_v6_dcache_clean_area) /* * cpu_v6_switch_mm(pgd_phys, tsk) @@ -95,7 +100,7 @@ ENTRY(cpu_v6_dcache_clean_area) * It is assumed that: * - we are not using split page tables */ -ENTRY(cpu_v6_switch_mm) +SYM_TYPED_FUNC_START(cpu_v6_switch_mm) #ifdef CONFIG_MMU mov r2, #0 mmid r1, r1 @ get mm->context.id @@ -113,6 +118,7 @@ ENTRY(cpu_v6_switch_mm) mcr p15, 0, r1, c13, c0, 1 @ set context ID #endif ret lr +SYM_FUNC_END(cpu_v6_switch_mm) /* * cpu_v6_set_pte_ext(ptep, pte, ext) @@ -126,17 +132,18 @@ ENTRY(cpu_v6_switch_mm) */ armv6_mt_table cpu_v6 -ENTRY(cpu_v6_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_v6_set_pte_ext) #ifdef CONFIG_MMU armv6_set_pte_ext cpu_v6 #endif ret lr +SYM_FUNC_END(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size .equ cpu_v6_suspend_size, 4 * 6 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_v6_do_suspend) +SYM_TYPED_FUNC_START(cpu_v6_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID #ifdef CONFIG_MMU @@ -148,9 +155,9 @@ ENTRY(cpu_v6_do_suspend) mrc p15, 0, r9, c1, c0, 0 @ control register stmia r0, {r4 - r9} ldmfd sp!, {r4- r9, pc} -ENDPROC(cpu_v6_do_suspend) +SYM_FUNC_END(cpu_v6_do_suspend) -ENTRY(cpu_v6_do_resume) +SYM_TYPED_FUNC_START(cpu_v6_do_resume) mov ip, #0 mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache @@ -172,7 +179,7 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, ip, c7, c5, 4 @ ISB mov r0, r9 @ control register b cpu_resume_mmu -ENDPROC(cpu_v6_do_resume) +SYM_FUNC_END(cpu_v6_do_resume) #endif string cpu_v6_name, "ARMv6-compatible processor" diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 0a3083ad19c2..1007702fcaf3 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -40,7 +40,7 @@ * even on Cortex-A8 revisions not affected by 430973. * If IBE is not set, the flush BTAC/BTB won't do anything. */ -ENTRY(cpu_v7_switch_mm) +SYM_TYPED_FUNC_START(cpu_v7_switch_mm) #ifdef CONFIG_MMU mmid r1, r1 @ get mm->context.id ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) @@ -59,7 +59,7 @@ ENTRY(cpu_v7_switch_mm) isb #endif bx lr -ENDPROC(cpu_v7_switch_mm) +SYM_FUNC_END(cpu_v7_switch_mm) /* * cpu_v7_set_pte_ext(ptep, pte) @@ -71,7 +71,7 @@ ENDPROC(cpu_v7_switch_mm) * - pte - PTE value to store * - ext - value for extended PTE bits */ -ENTRY(cpu_v7_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0] @ linux version @@ -106,7 +106,7 @@ ENTRY(cpu_v7_set_pte_ext) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif bx lr -ENDPROC(cpu_v7_set_pte_ext) +SYM_FUNC_END(cpu_v7_set_pte_ext) /* * Memory region attributes with SCTLR.TRE=1 diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 131984462d0d..bdabc15cde56 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -42,7 +42,7 @@ * Set the translation table base pointer to be pgd_phys (physical address of * the new TTB). */ -ENTRY(cpu_v7_switch_mm) +SYM_TYPED_FUNC_START(cpu_v7_switch_mm) #ifdef CONFIG_MMU mmid r2, r2 asid r2, r2 @@ -51,7 +51,7 @@ ENTRY(cpu_v7_switch_mm) isb #endif ret lr -ENDPROC(cpu_v7_switch_mm) +SYM_FUNC_END(cpu_v7_switch_mm) #ifdef __ARMEB__ #define rl r3 @@ -68,7 +68,7 @@ ENDPROC(cpu_v7_switch_mm) * - ptep - pointer to level 3 translation table entry * - pte - PTE value to store (64-bit in r2 and r3) */ -ENTRY(cpu_v7_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU tst rl, #L_PTE_VALID beq 1f @@ -87,7 +87,7 @@ ENTRY(cpu_v7_set_pte_ext) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif ret lr -ENDPROC(cpu_v7_set_pte_ext) +SYM_FUNC_END(cpu_v7_set_pte_ext) /* * Memory region attributes for LPAE (defined in pgtable-3level.h): diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 193c7aeb6703..2cd933342679 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -7,6 +7,7 @@ * This is the "shell" of the ARMv7 processor support. */ #include <linux/arm-smccc.h> +#include <linux/cfi_types.h> #include <linux/init.h> #include <linux/linkage.h> #include <linux/pgtable.h> @@ -26,17 +27,17 @@ .arch armv7-a -ENTRY(cpu_v7_proc_init) +SYM_TYPED_FUNC_START(cpu_v7_proc_init) ret lr -ENDPROC(cpu_v7_proc_init) +SYM_FUNC_END(cpu_v7_proc_init) -ENTRY(cpu_v7_proc_fin) +SYM_TYPED_FUNC_START(cpu_v7_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr -ENDPROC(cpu_v7_proc_fin) +SYM_FUNC_END(cpu_v7_proc_fin) /* * cpu_v7_reset(loc, hyp) @@ -53,7 +54,7 @@ ENDPROC(cpu_v7_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_v7_reset) +SYM_TYPED_FUNC_START(cpu_v7_reset) mrc p15, 0, r2, c1, c0, 0 @ ctrl register bic r2, r2, #0x1 @ ...............m THUMB( bic r2, r2, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) @@ -64,7 +65,7 @@ ENTRY(cpu_v7_reset) bne __hyp_soft_restart #endif bx r0 -ENDPROC(cpu_v7_reset) +SYM_FUNC_END(cpu_v7_reset) .popsection /* @@ -74,13 +75,13 @@ ENDPROC(cpu_v7_reset) * * IRQs are already disabled. */ -ENTRY(cpu_v7_do_idle) +SYM_TYPED_FUNC_START(cpu_v7_do_idle) dsb @ WFI may enter a low-power mode wfi ret lr -ENDPROC(cpu_v7_do_idle) +SYM_FUNC_END(cpu_v7_do_idle) -ENTRY(cpu_v7_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_v7_dcache_clean_area) ALT_SMP(W(nop)) @ MP extensions imply L1 PTW ALT_UP_B(1f) ret lr @@ -91,38 +92,39 @@ ENTRY(cpu_v7_dcache_clean_area) bhi 2b dsb ishst ret lr -ENDPROC(cpu_v7_dcache_clean_area) +SYM_FUNC_END(cpu_v7_dcache_clean_area) -#ifdef CONFIG_ARM_PSCI +#if defined(CONFIG_ARM_PSCI) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR) .arch_extension sec -ENTRY(cpu_v7_smc_switch_mm) +SYM_TYPED_FUNC_START(cpu_v7_smc_switch_mm) stmfd sp!, {r0 - r3} movw r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1 movt r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1 smc #0 ldmfd sp!, {r0 - r3} b cpu_v7_switch_mm -ENDPROC(cpu_v7_smc_switch_mm) +SYM_FUNC_END(cpu_v7_smc_switch_mm) .arch_extension virt -ENTRY(cpu_v7_hvc_switch_mm) +SYM_TYPED_FUNC_START(cpu_v7_hvc_switch_mm) stmfd sp!, {r0 - r3} movw r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1 movt r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1 hvc #0 ldmfd sp!, {r0 - r3} b cpu_v7_switch_mm -ENDPROC(cpu_v7_hvc_switch_mm) +SYM_FUNC_END(cpu_v7_hvc_switch_mm) #endif -ENTRY(cpu_v7_iciallu_switch_mm) + +SYM_TYPED_FUNC_START(cpu_v7_iciallu_switch_mm) mov r3, #0 mcr p15, 0, r3, c7, c5, 0 @ ICIALLU b cpu_v7_switch_mm -ENDPROC(cpu_v7_iciallu_switch_mm) -ENTRY(cpu_v7_bpiall_switch_mm) +SYM_FUNC_END(cpu_v7_iciallu_switch_mm) +SYM_TYPED_FUNC_START(cpu_v7_bpiall_switch_mm) mov r3, #0 mcr p15, 0, r3, c7, c5, 6 @ flush BTAC/BTB b cpu_v7_switch_mm -ENDPROC(cpu_v7_bpiall_switch_mm) +SYM_FUNC_END(cpu_v7_bpiall_switch_mm) string cpu_v7_name, "ARMv7 Processor" .align @@ -131,7 +133,7 @@ ENDPROC(cpu_v7_bpiall_switch_mm) .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 9 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_v7_do_suspend) +SYM_TYPED_FUNC_START(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID @@ -150,9 +152,9 @@ ENTRY(cpu_v7_do_suspend) mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control stmia r0, {r5 - r11} ldmfd sp!, {r4 - r11, pc} -ENDPROC(cpu_v7_do_suspend) +SYM_FUNC_END(cpu_v7_do_suspend) -ENTRY(cpu_v7_do_resume) +SYM_TYPED_FUNC_START(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID @@ -186,22 +188,22 @@ ENTRY(cpu_v7_do_resume) dsb mov r0, r8 @ control register b cpu_resume_mmu -ENDPROC(cpu_v7_do_resume) +SYM_FUNC_END(cpu_v7_do_resume) #endif .globl cpu_ca9mp_suspend_size .equ cpu_ca9mp_suspend_size, cpu_v7_suspend_size + 4 * 2 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_ca9mp_do_suspend) +SYM_TYPED_FUNC_START(cpu_ca9mp_do_suspend) stmfd sp!, {r4 - r5} mrc p15, 0, r4, c15, c0, 1 @ Diagnostic register mrc p15, 0, r5, c15, c0, 0 @ Power register stmia r0!, {r4 - r5} ldmfd sp!, {r4 - r5} b cpu_v7_do_suspend -ENDPROC(cpu_ca9mp_do_suspend) +SYM_FUNC_END(cpu_ca9mp_do_suspend) -ENTRY(cpu_ca9mp_do_resume) +SYM_TYPED_FUNC_START(cpu_ca9mp_do_resume) ldmia r0!, {r4 - r5} mrc p15, 0, r10, c15, c0, 1 @ Read Diagnostic register teq r4, r10 @ Already restored? @@ -210,7 +212,7 @@ ENTRY(cpu_ca9mp_do_resume) teq r5, r10 @ Already restored? mcrne p15, 0, r5, c15, c0, 0 @ No, so restore it b cpu_v7_do_resume -ENDPROC(cpu_ca9mp_do_resume) +SYM_FUNC_END(cpu_ca9mp_do_resume) #endif #ifdef CONFIG_CPU_PJ4B @@ -220,18 +222,18 @@ ENDPROC(cpu_ca9mp_do_resume) globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin globl_equ cpu_pj4b_reset, cpu_v7_reset #ifdef CONFIG_PJ4B_ERRATA_4742 -ENTRY(cpu_pj4b_do_idle) +SYM_TYPED_FUNC_START(cpu_pj4b_do_idle) dsb @ WFI may enter a low-power mode wfi dsb @barrier ret lr -ENDPROC(cpu_pj4b_do_idle) +SYM_FUNC_END(cpu_pj4b_do_idle) #else globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle #endif globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_pj4b_do_suspend) +SYM_TYPED_FUNC_START(cpu_pj4b_do_suspend) stmfd sp!, {r6 - r10} mrc p15, 1, r6, c15, c1, 0 @ save CP15 - extra features mrc p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 @@ -241,9 +243,9 @@ ENTRY(cpu_pj4b_do_suspend) stmia r0!, {r6 - r10} ldmfd sp!, {r6 - r10} b cpu_v7_do_suspend -ENDPROC(cpu_pj4b_do_suspend) +SYM_FUNC_END(cpu_pj4b_do_suspend) -ENTRY(cpu_pj4b_do_resume) +SYM_TYPED_FUNC_START(cpu_pj4b_do_resume) ldmia r0!, {r6 - r10} mcr p15, 1, r6, c15, c1, 0 @ restore CP15 - extra features mcr p15, 1, r7, c15, c2, 0 @ restore CP15 - Aux Func Modes Ctrl 0 @@ -251,7 +253,7 @@ ENTRY(cpu_pj4b_do_resume) mcr p15, 1, r9, c15, c1, 1 @ restore CP15 - Aux Debug Modes Ctrl 1 mcr p15, 0, r10, c9, c14, 0 @ restore CP15 - PMC b cpu_v7_do_resume -ENDPROC(cpu_pj4b_do_resume) +SYM_FUNC_END(cpu_pj4b_do_resume) #endif .globl cpu_pj4b_suspend_size .equ cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5 diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index d65a12f851a9..d4675603593b 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -8,18 +8,19 @@ * This is the "shell" of the ARMv7-M processor support. */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/page.h> #include <asm/v7m.h> #include "proc-macros.S" -ENTRY(cpu_v7m_proc_init) +SYM_TYPED_FUNC_START(cpu_v7m_proc_init) ret lr -ENDPROC(cpu_v7m_proc_init) +SYM_FUNC_END(cpu_v7m_proc_init) -ENTRY(cpu_v7m_proc_fin) +SYM_TYPED_FUNC_START(cpu_v7m_proc_fin) ret lr -ENDPROC(cpu_v7m_proc_fin) +SYM_FUNC_END(cpu_v7m_proc_fin) /* * cpu_v7m_reset(loc) @@ -31,9 +32,9 @@ ENDPROC(cpu_v7m_proc_fin) * - loc - location to jump to for soft reset */ .align 5 -ENTRY(cpu_v7m_reset) +SYM_TYPED_FUNC_START(cpu_v7m_reset) ret r0 -ENDPROC(cpu_v7m_reset) +SYM_FUNC_END(cpu_v7m_reset) /* * cpu_v7m_do_idle() @@ -42,36 +43,36 @@ ENDPROC(cpu_v7m_reset) * * IRQs are already disabled. */ -ENTRY(cpu_v7m_do_idle) +SYM_TYPED_FUNC_START(cpu_v7m_do_idle) wfi ret lr -ENDPROC(cpu_v7m_do_idle) +SYM_FUNC_END(cpu_v7m_do_idle) -ENTRY(cpu_v7m_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_v7m_dcache_clean_area) ret lr -ENDPROC(cpu_v7m_dcache_clean_area) +SYM_FUNC_END(cpu_v7m_dcache_clean_area) /* * There is no MMU, so here is nothing to do. */ -ENTRY(cpu_v7m_switch_mm) +SYM_TYPED_FUNC_START(cpu_v7m_switch_mm) ret lr -ENDPROC(cpu_v7m_switch_mm) +SYM_FUNC_END(cpu_v7m_switch_mm) .globl cpu_v7m_suspend_size .equ cpu_v7m_suspend_size, 0 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_v7m_do_suspend) +SYM_TYPED_FUNC_START(cpu_v7m_do_suspend) ret lr -ENDPROC(cpu_v7m_do_suspend) +SYM_FUNC_END(cpu_v7m_do_suspend) -ENTRY(cpu_v7m_do_resume) +SYM_TYPED_FUNC_START(cpu_v7m_do_resume) ret lr -ENDPROC(cpu_v7m_do_resume) +SYM_FUNC_END(cpu_v7m_do_resume) #endif -ENTRY(cpu_cm7_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_cm7_dcache_clean_area) dcache_line_size r2, r3 movw r3, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC movt r3, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC @@ -82,16 +83,16 @@ ENTRY(cpu_cm7_dcache_clean_area) bhi 1b dsb ret lr -ENDPROC(cpu_cm7_dcache_clean_area) +SYM_FUNC_END(cpu_cm7_dcache_clean_area) -ENTRY(cpu_cm7_proc_fin) +SYM_TYPED_FUNC_START(cpu_cm7_proc_fin) movw r2, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) movt r2, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) ldr r0, [r2] bic r0, r0, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC) str r0, [r2] ret lr -ENDPROC(cpu_cm7_proc_fin) +SYM_FUNC_END(cpu_cm7_proc_fin) .section ".init.text", "ax" diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index a17afe7e195a..14927b380452 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -23,6 +23,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -79,18 +80,20 @@ * * Nothing too exciting at the moment */ -ENTRY(cpu_xsc3_proc_init) +SYM_TYPED_FUNC_START(cpu_xsc3_proc_init) ret lr +SYM_FUNC_END(cpu_xsc3_proc_init) /* * cpu_xsc3_proc_fin() */ -ENTRY(cpu_xsc3_proc_fin) +SYM_TYPED_FUNC_START(cpu_xsc3_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_xsc3_proc_fin) /* * cpu_xsc3_reset(loc) @@ -103,7 +106,7 @@ ENTRY(cpu_xsc3_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_xsc3_reset) +SYM_TYPED_FUNC_START(cpu_xsc3_reset) mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE msr cpsr_c, r1 @ reset CPSR mrc p15, 0, r1, c1, c0, 0 @ ctrl register @@ -117,7 +120,7 @@ ENTRY(cpu_xsc3_reset) @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs ret r0 -ENDPROC(cpu_xsc3_reset) +SYM_FUNC_END(cpu_xsc3_reset) .popsection /* @@ -132,10 +135,11 @@ ENDPROC(cpu_xsc3_reset) */ .align 5 -ENTRY(cpu_xsc3_do_idle) +SYM_TYPED_FUNC_START(cpu_xsc3_do_idle) mov r0, #1 mcr p14, 0, r0, c7, c0, 0 @ go to idle ret lr +SYM_FUNC_END(cpu_xsc3_do_idle) /* ================================= CACHE ================================ */ @@ -144,11 +148,11 @@ ENTRY(cpu_xsc3_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(xsc3_flush_icache_all) +SYM_TYPED_FUNC_START(xsc3_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(xsc3_flush_icache_all) +SYM_FUNC_END(xsc3_flush_icache_all) /* * flush_user_cache_all() @@ -156,15 +160,14 @@ ENDPROC(xsc3_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(xsc3_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(xsc3_flush_user_cache_all, xsc3_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(xsc3_flush_kern_cache_all) +SYM_TYPED_FUNC_START(xsc3_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -174,6 +177,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush ret lr +SYM_FUNC_END(xsc3_flush_kern_cache_all) /* * flush_user_cache_range(start, end, vm_flags) @@ -186,7 +190,7 @@ __flush_whole_cache: * - vma - vma_area_struct describing address space */ .align 5 -ENTRY(xsc3_flush_user_cache_range) +SYM_TYPED_FUNC_START(xsc3_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #MAX_AREA_SIZE @@ -203,6 +207,7 @@ ENTRY(xsc3_flush_user_cache_range) mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush ret lr +SYM_FUNC_END(xsc3_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -217,9 +222,13 @@ ENTRY(xsc3_flush_user_cache_range) * Note: single I-cache line invalidation isn't used here since * it also trashes the mini I-cache used by JTAG debuggers. */ -ENTRY(xsc3_coherent_kern_range) -/* FALLTHROUGH */ -ENTRY(xsc3_coherent_user_range) +SYM_TYPED_FUNC_START(xsc3_coherent_kern_range) +#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */ + b xsc3_coherent_user_range +#endif +SYM_FUNC_END(xsc3_coherent_kern_range) + +SYM_TYPED_FUNC_START(xsc3_coherent_user_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line add r0, r0, #CACHELINESIZE @@ -230,6 +239,7 @@ ENTRY(xsc3_coherent_user_range) mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c5, 4 @ prefetch flush ret lr +SYM_FUNC_END(xsc3_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -240,7 +250,7 @@ ENTRY(xsc3_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(xsc3_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(xsc3_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE @@ -251,6 +261,7 @@ ENTRY(xsc3_flush_kern_dcache_area) mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c5, 4 @ prefetch flush ret lr +SYM_FUNC_END(xsc3_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -301,7 +312,7 @@ xsc3_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(xsc3_dma_flush_range) +SYM_TYPED_FUNC_START(xsc3_dma_flush_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE @@ -309,6 +320,7 @@ ENTRY(xsc3_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ data write barrier ret lr +SYM_FUNC_END(xsc3_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -316,13 +328,13 @@ ENTRY(xsc3_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(xsc3_dma_map_area) +SYM_TYPED_FUNC_START(xsc3_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq xsc3_dma_clean_range bcs xsc3_dma_inv_range b xsc3_dma_flush_range -ENDPROC(xsc3_dma_map_area) +SYM_FUNC_END(xsc3_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -330,22 +342,17 @@ ENDPROC(xsc3_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(xsc3_dma_unmap_area) +SYM_TYPED_FUNC_START(xsc3_dma_unmap_area) ret lr -ENDPROC(xsc3_dma_unmap_area) - - .globl xsc3_flush_kern_cache_louis - .equ xsc3_flush_kern_cache_louis, xsc3_flush_kern_cache_all - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions xsc3 +SYM_FUNC_END(xsc3_dma_unmap_area) -ENTRY(cpu_xsc3_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_xsc3_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line add r0, r0, #CACHELINESIZE subs r1, r1, #CACHELINESIZE bhi 1b ret lr +SYM_FUNC_END(cpu_xsc3_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -357,7 +364,7 @@ ENTRY(cpu_xsc3_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_xsc3_switch_mm) +SYM_TYPED_FUNC_START(cpu_xsc3_switch_mm) clean_d_cache r1, r2 mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, ip, c7, c10, 4 @ data write barrier @@ -366,6 +373,7 @@ ENTRY(cpu_xsc3_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs cpwait_ret lr, ip +SYM_FUNC_END(cpu_xsc3_switch_mm) /* * cpu_xsc3_set_pte_ext(ptep, pte, ext) @@ -391,7 +399,7 @@ cpu_xsc3_mt_table: .long 0x00 @ unused .align 5 -ENTRY(cpu_xsc3_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_xsc3_set_pte_ext) xscale_set_pte_ext_prologue tst r1, #L_PTE_SHARED @ shared? @@ -404,6 +412,7 @@ ENTRY(cpu_xsc3_set_pte_ext) xscale_set_pte_ext_epilogue ret lr +SYM_FUNC_END(cpu_xsc3_set_pte_ext) .ltorg .align @@ -411,7 +420,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .globl cpu_xsc3_suspend_size .equ cpu_xsc3_suspend_size, 4 * 6 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_xsc3_do_suspend) +SYM_TYPED_FUNC_START(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg @@ -422,9 +431,9 @@ ENTRY(cpu_xsc3_do_suspend) bic r4, r4, #2 @ clear frequency change bit stmia r0, {r4 - r9} @ store cp regs ldmia sp!, {r4 - r9, pc} -ENDPROC(cpu_xsc3_do_suspend) +SYM_FUNC_END(cpu_xsc3_do_suspend) -ENTRY(cpu_xsc3_do_resume) +SYM_TYPED_FUNC_START(cpu_xsc3_do_resume) ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB @@ -440,7 +449,7 @@ ENTRY(cpu_xsc3_do_resume) mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg mov r0, r9 @ control register b cpu_resume_mmu -ENDPROC(cpu_xsc3_do_resume) +SYM_FUNC_END(cpu_xsc3_do_resume) #endif .type __xsc3_setup, #function diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index d82590aa71c0..d8462df8020b 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -19,6 +19,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <linux/pgtable.h> #include <asm/assembler.h> #include <asm/hwcap.h> @@ -111,22 +112,24 @@ clean_addr: .word CLEAN_ADDR * * Nothing too exciting at the moment */ -ENTRY(cpu_xscale_proc_init) +SYM_TYPED_FUNC_START(cpu_xscale_proc_init) @ enable write buffer coalescing. Some bootloader disable it mrc p15, 0, r1, c1, c0, 1 bic r1, r1, #1 mcr p15, 0, r1, c1, c0, 1 ret lr +SYM_FUNC_END(cpu_xscale_proc_init) /* * cpu_xscale_proc_fin() */ -ENTRY(cpu_xscale_proc_fin) +SYM_TYPED_FUNC_START(cpu_xscale_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches ret lr +SYM_FUNC_END(cpu_xscale_proc_fin) /* * cpu_xscale_reset(loc) @@ -141,7 +144,7 @@ ENTRY(cpu_xscale_proc_fin) */ .align 5 .pushsection .idmap.text, "ax" -ENTRY(cpu_xscale_reset) +SYM_TYPED_FUNC_START(cpu_xscale_reset) mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE msr cpsr_c, r1 @ reset CPSR mcr p15, 0, r1, c10, c4, 1 @ unlock I-TLB @@ -159,7 +162,7 @@ ENTRY(cpu_xscale_reset) @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ret r0 -ENDPROC(cpu_xscale_reset) +SYM_FUNC_END(cpu_xscale_reset) .popsection /* @@ -174,10 +177,11 @@ ENDPROC(cpu_xscale_reset) */ .align 5 -ENTRY(cpu_xscale_do_idle) +SYM_TYPED_FUNC_START(cpu_xscale_do_idle) mov r0, #1 mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE ret lr +SYM_FUNC_END(cpu_xscale_do_idle) /* ================================= CACHE ================================ */ @@ -186,11 +190,11 @@ ENTRY(cpu_xscale_do_idle) * * Unconditionally clean and invalidate the entire icache. */ -ENTRY(xscale_flush_icache_all) +SYM_TYPED_FUNC_START(xscale_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache ret lr -ENDPROC(xscale_flush_icache_all) +SYM_FUNC_END(xscale_flush_icache_all) /* * flush_user_cache_all() @@ -198,15 +202,14 @@ ENDPROC(xscale_flush_icache_all) * Invalidate all cache entries in a particular address * space. */ -ENTRY(xscale_flush_user_cache_all) - /* FALLTHROUGH */ +SYM_FUNC_ALIAS(xscale_flush_user_cache_all, xscale_flush_kern_cache_all) /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ -ENTRY(xscale_flush_kern_cache_all) +SYM_TYPED_FUNC_START(xscale_flush_kern_cache_all) mov r2, #VM_EXEC mov ip, #0 __flush_whole_cache: @@ -215,6 +218,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer ret lr +SYM_FUNC_END(xscale_flush_kern_cache_all) /* * flush_user_cache_range(start, end, vm_flags) @@ -227,7 +231,7 @@ __flush_whole_cache: * - vma - vma_area_struct describing address space */ .align 5 -ENTRY(xscale_flush_user_cache_range) +SYM_TYPED_FUNC_START(xscale_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #MAX_AREA_SIZE @@ -244,6 +248,7 @@ ENTRY(xscale_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer ret lr +SYM_FUNC_END(xscale_flush_user_cache_range) /* * coherent_kern_range(start, end) @@ -258,7 +263,7 @@ ENTRY(xscale_flush_user_cache_range) * Note: single I-cache line invalidation isn't used here since * it also trashes the mini I-cache used by JTAG debuggers. */ -ENTRY(xscale_coherent_kern_range) +SYM_TYPED_FUNC_START(xscale_coherent_kern_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHELINESIZE @@ -268,6 +273,7 @@ ENTRY(xscale_coherent_kern_range) mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer ret lr +SYM_FUNC_END(xscale_coherent_kern_range) /* * coherent_user_range(start, end) @@ -279,7 +285,7 @@ ENTRY(xscale_coherent_kern_range) * - start - virtual start address * - end - virtual end address */ -ENTRY(xscale_coherent_user_range) +SYM_TYPED_FUNC_START(xscale_coherent_user_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c5, 1 @ Invalidate I cache entry @@ -290,6 +296,7 @@ ENTRY(xscale_coherent_user_range) mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer ret lr +SYM_FUNC_END(xscale_coherent_user_range) /* * flush_kern_dcache_area(void *addr, size_t size) @@ -300,7 +307,7 @@ ENTRY(xscale_coherent_user_range) * - addr - kernel address * - size - region size */ -ENTRY(xscale_flush_kern_dcache_area) +SYM_TYPED_FUNC_START(xscale_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry @@ -311,6 +318,7 @@ ENTRY(xscale_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer ret lr +SYM_FUNC_END(xscale_flush_kern_dcache_area) /* * dma_inv_range(start, end) @@ -361,7 +369,7 @@ xscale_dma_clean_range: * - start - virtual start address * - end - virtual end address */ -ENTRY(xscale_dma_flush_range) +SYM_TYPED_FUNC_START(xscale_dma_flush_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry @@ -370,6 +378,7 @@ ENTRY(xscale_dma_flush_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer ret lr +SYM_FUNC_END(xscale_dma_flush_range) /* * dma_map_area(start, size, dir) @@ -377,13 +386,27 @@ ENTRY(xscale_dma_flush_range) * - size - size of region * - dir - DMA direction */ -ENTRY(xscale_dma_map_area) +SYM_TYPED_FUNC_START(xscale_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq xscale_dma_clean_range bcs xscale_dma_inv_range b xscale_dma_flush_range -ENDPROC(xscale_dma_map_area) +SYM_FUNC_END(xscale_dma_map_area) + +/* + * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't + * clear the dirty bits, which means that if we invalidate a dirty line, + * the dirty data can still be written back to external memory later on. + * + * The recommended workaround is to always do a clean D-cache line before + * doing an invalidate D-cache line, so on the affected processors, + * dma_inv_range() is implemented as dma_flush_range(). + * + * See erratum #25 of "Intel 80200 Processor Specification Update", + * revision January 22, 2003, available at: + * http://www.intel.com/design/iio/specupdt/273415.htm + */ /* * dma_map_area(start, size, dir) @@ -391,12 +414,12 @@ ENDPROC(xscale_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(xscale_80200_A0_A1_dma_map_area) +SYM_TYPED_FUNC_START(xscale_80200_A0_A1_dma_map_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE beq xscale_dma_clean_range b xscale_dma_flush_range -ENDPROC(xscale_80200_A0_A1_dma_map_area) +SYM_FUNC_END(xscale_80200_A0_A1_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -404,59 +427,17 @@ ENDPROC(xscale_80200_A0_A1_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(xscale_dma_unmap_area) +SYM_TYPED_FUNC_START(xscale_dma_unmap_area) ret lr -ENDPROC(xscale_dma_unmap_area) - - .globl xscale_flush_kern_cache_louis - .equ xscale_flush_kern_cache_louis, xscale_flush_kern_cache_all +SYM_FUNC_END(xscale_dma_unmap_area) - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions xscale - -/* - * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't - * clear the dirty bits, which means that if we invalidate a dirty line, - * the dirty data can still be written back to external memory later on. - * - * The recommended workaround is to always do a clean D-cache line before - * doing an invalidate D-cache line, so on the affected processors, - * dma_inv_range() is implemented as dma_flush_range(). - * - * See erratum #25 of "Intel 80200 Processor Specification Update", - * revision January 22, 2003, available at: - * http://www.intel.com/design/iio/specupdt/273415.htm - */ -.macro a0_alias basename - .globl xscale_80200_A0_A1_\basename - .type xscale_80200_A0_A1_\basename , %function - .equ xscale_80200_A0_A1_\basename , xscale_\basename -.endm - -/* - * Most of the cache functions are unchanged for these processor revisions. - * Export suitable alias symbols for the unchanged functions: - */ - a0_alias flush_icache_all - a0_alias flush_user_cache_all - a0_alias flush_kern_cache_all - a0_alias flush_kern_cache_louis - a0_alias flush_user_cache_range - a0_alias coherent_kern_range - a0_alias coherent_user_range - a0_alias flush_kern_dcache_area - a0_alias dma_flush_range - a0_alias dma_unmap_area - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions xscale_80200_A0_A1 - -ENTRY(cpu_xscale_dcache_clean_area) +SYM_TYPED_FUNC_START(cpu_xscale_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHELINESIZE subs r1, r1, #CACHELINESIZE bhi 1b ret lr +SYM_FUNC_END(cpu_xscale_dcache_clean_area) /* =============================== PageTable ============================== */ @@ -468,13 +449,14 @@ ENTRY(cpu_xscale_dcache_clean_area) * pgd: new page tables */ .align 5 -ENTRY(cpu_xscale_switch_mm) +SYM_TYPED_FUNC_START(cpu_xscale_switch_mm) clean_d_cache r1, r2 mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs cpwait_ret lr, ip +SYM_FUNC_END(cpu_xscale_switch_mm) /* * cpu_xscale_set_pte_ext(ptep, pte, ext) @@ -502,7 +484,7 @@ cpu_xscale_mt_table: .long 0x00 @ unused .align 5 -ENTRY(cpu_xscale_set_pte_ext) +SYM_TYPED_FUNC_START(cpu_xscale_set_pte_ext) xscale_set_pte_ext_prologue @ @@ -520,6 +502,7 @@ ENTRY(cpu_xscale_set_pte_ext) xscale_set_pte_ext_epilogue ret lr +SYM_FUNC_END(cpu_xscale_set_pte_ext) .ltorg .align @@ -527,7 +510,7 @@ ENTRY(cpu_xscale_set_pte_ext) .globl cpu_xscale_suspend_size .equ cpu_xscale_suspend_size, 4 * 6 #ifdef CONFIG_ARM_CPU_SUSPEND -ENTRY(cpu_xscale_do_suspend) +SYM_TYPED_FUNC_START(cpu_xscale_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg @@ -538,9 +521,9 @@ ENTRY(cpu_xscale_do_suspend) bic r4, r4, #2 @ clear frequency change bit stmia r0, {r4 - r9} @ store cp regs ldmfd sp!, {r4 - r9, pc} -ENDPROC(cpu_xscale_do_suspend) +SYM_FUNC_END(cpu_xscale_do_suspend) -ENTRY(cpu_xscale_do_resume) +SYM_TYPED_FUNC_START(cpu_xscale_do_resume) ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs @@ -553,7 +536,7 @@ ENTRY(cpu_xscale_do_resume) mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg mov r0, r9 @ control register b cpu_resume_mmu -ENDPROC(cpu_xscale_do_resume) +SYM_FUNC_END(cpu_xscale_do_resume) #endif .type __xscale_setup, #function diff --git a/arch/arm/mm/proc.c b/arch/arm/mm/proc.c new file mode 100644 index 000000000000..2027845efefb --- /dev/null +++ b/arch/arm/mm/proc.c @@ -0,0 +1,500 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file defines C prototypes for the low-level processor assembly functions + * and creates a reference for CFI. This needs to be done for every assembly + * processor ("proc") function that is called from C but does not have a + * corresponding C implementation. + * + * Processors are listed in the order they appear in the Makefile. + * + * Functions are listed if and only if they see use on the target CPU, and in + * the order they are defined in struct processor. + */ +#include <asm/proc-fns.h> + +#ifdef CONFIG_CPU_ARM7TDMI +void cpu_arm7tdmi_proc_init(void); +__ADDRESSABLE(cpu_arm7tdmi_proc_init); +void cpu_arm7tdmi_proc_fin(void); +__ADDRESSABLE(cpu_arm7tdmi_proc_fin); +void cpu_arm7tdmi_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm7tdmi_reset); +int cpu_arm7tdmi_do_idle(void); +__ADDRESSABLE(cpu_arm7tdmi_do_idle); +void cpu_arm7tdmi_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm7tdmi_dcache_clean_area); +void cpu_arm7tdmi_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm7tdmi_switch_mm); +#endif + +#ifdef CONFIG_CPU_ARM720T +void cpu_arm720_proc_init(void); +__ADDRESSABLE(cpu_arm720_proc_init); +void cpu_arm720_proc_fin(void); +__ADDRESSABLE(cpu_arm720_proc_fin); +void cpu_arm720_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm720_reset); +int cpu_arm720_do_idle(void); +__ADDRESSABLE(cpu_arm720_do_idle); +void cpu_arm720_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm720_dcache_clean_area); +void cpu_arm720_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm720_switch_mm); +void cpu_arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm720_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_ARM740T +void cpu_arm740_proc_init(void); +__ADDRESSABLE(cpu_arm740_proc_init); +void cpu_arm740_proc_fin(void); +__ADDRESSABLE(cpu_arm740_proc_fin); +void cpu_arm740_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm740_reset); +int cpu_arm740_do_idle(void); +__ADDRESSABLE(cpu_arm740_do_idle); +void cpu_arm740_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm740_dcache_clean_area); +void cpu_arm740_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm740_switch_mm); +#endif + +#ifdef CONFIG_CPU_ARM9TDMI +void cpu_arm9tdmi_proc_init(void); +__ADDRESSABLE(cpu_arm9tdmi_proc_init); +void cpu_arm9tdmi_proc_fin(void); +__ADDRESSABLE(cpu_arm9tdmi_proc_fin); +void cpu_arm9tdmi_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm9tdmi_reset); +int cpu_arm9tdmi_do_idle(void); +__ADDRESSABLE(cpu_arm9tdmi_do_idle); +void cpu_arm9tdmi_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm9tdmi_dcache_clean_area); +void cpu_arm9tdmi_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm9tdmi_switch_mm); +#endif + +#ifdef CONFIG_CPU_ARM920T +void cpu_arm920_proc_init(void); +__ADDRESSABLE(cpu_arm920_proc_init); +void cpu_arm920_proc_fin(void); +__ADDRESSABLE(cpu_arm920_proc_fin); +void cpu_arm920_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm920_reset); +int cpu_arm920_do_idle(void); +__ADDRESSABLE(cpu_arm920_do_idle); +void cpu_arm920_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm920_dcache_clean_area); +void cpu_arm920_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm920_switch_mm); +void cpu_arm920_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm920_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_arm920_do_suspend(void *); +__ADDRESSABLE(cpu_arm920_do_suspend); +void cpu_arm920_do_resume(void *); +__ADDRESSABLE(cpu_arm920_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_ARM920T */ + +#ifdef CONFIG_CPU_ARM922T +void cpu_arm922_proc_init(void); +__ADDRESSABLE(cpu_arm922_proc_init); +void cpu_arm922_proc_fin(void); +__ADDRESSABLE(cpu_arm922_proc_fin); +void cpu_arm922_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm922_reset); +int cpu_arm922_do_idle(void); +__ADDRESSABLE(cpu_arm922_do_idle); +void cpu_arm922_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm922_dcache_clean_area); +void cpu_arm922_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm922_switch_mm); +void cpu_arm922_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm922_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_ARM925T +void cpu_arm925_proc_init(void); +__ADDRESSABLE(cpu_arm925_proc_init); +void cpu_arm925_proc_fin(void); +__ADDRESSABLE(cpu_arm925_proc_fin); +void cpu_arm925_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm925_reset); +int cpu_arm925_do_idle(void); +__ADDRESSABLE(cpu_arm925_do_idle); +void cpu_arm925_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm925_dcache_clean_area); +void cpu_arm925_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm925_switch_mm); +void cpu_arm925_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm925_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_ARM926T +void cpu_arm926_proc_init(void); +__ADDRESSABLE(cpu_arm926_proc_init); +void cpu_arm926_proc_fin(void); +__ADDRESSABLE(cpu_arm926_proc_fin); +void cpu_arm926_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm926_reset); +int cpu_arm926_do_idle(void); +__ADDRESSABLE(cpu_arm926_do_idle); +void cpu_arm926_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm926_dcache_clean_area); +void cpu_arm926_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm926_switch_mm); +void cpu_arm926_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm926_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_arm926_do_suspend(void *); +__ADDRESSABLE(cpu_arm926_do_suspend); +void cpu_arm926_do_resume(void *); +__ADDRESSABLE(cpu_arm926_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_ARM926T */ + +#ifdef CONFIG_CPU_ARM940T +void cpu_arm940_proc_init(void); +__ADDRESSABLE(cpu_arm940_proc_init); +void cpu_arm940_proc_fin(void); +__ADDRESSABLE(cpu_arm940_proc_fin); +void cpu_arm940_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm940_reset); +int cpu_arm940_do_idle(void); +__ADDRESSABLE(cpu_arm940_do_idle); +void cpu_arm940_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm940_dcache_clean_area); +void cpu_arm940_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm940_switch_mm); +#endif + +#ifdef CONFIG_CPU_ARM946E +void cpu_arm946_proc_init(void); +__ADDRESSABLE(cpu_arm946_proc_init); +void cpu_arm946_proc_fin(void); +__ADDRESSABLE(cpu_arm946_proc_fin); +void cpu_arm946_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm946_reset); +int cpu_arm946_do_idle(void); +__ADDRESSABLE(cpu_arm946_do_idle); +void cpu_arm946_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm946_dcache_clean_area); +void cpu_arm946_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm946_switch_mm); +#endif + +#ifdef CONFIG_CPU_FA526 +void cpu_fa526_proc_init(void); +__ADDRESSABLE(cpu_fa526_proc_init); +void cpu_fa526_proc_fin(void); +__ADDRESSABLE(cpu_fa526_proc_fin); +void cpu_fa526_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_fa526_reset); +int cpu_fa526_do_idle(void); +__ADDRESSABLE(cpu_fa526_do_idle); +void cpu_fa526_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_fa526_dcache_clean_area); +void cpu_fa526_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_fa526_switch_mm); +void cpu_fa526_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_fa526_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_ARM1020 +void cpu_arm1020_proc_init(void); +__ADDRESSABLE(cpu_arm1020_proc_init); +void cpu_arm1020_proc_fin(void); +__ADDRESSABLE(cpu_arm1020_proc_fin); +void cpu_arm1020_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm1020_reset); +int cpu_arm1020_do_idle(void); +__ADDRESSABLE(cpu_arm1020_do_idle); +void cpu_arm1020_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm1020_dcache_clean_area); +void cpu_arm1020_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm1020_switch_mm); +void cpu_arm1020_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm1020_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_ARM1020E +void cpu_arm1020e_proc_init(void); +__ADDRESSABLE(cpu_arm1020e_proc_init); +void cpu_arm1020e_proc_fin(void); +__ADDRESSABLE(cpu_arm1020e_proc_fin); +void cpu_arm1020e_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm1020e_reset); +int cpu_arm1020e_do_idle(void); +__ADDRESSABLE(cpu_arm1020e_do_idle); +void cpu_arm1020e_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm1020e_dcache_clean_area); +void cpu_arm1020e_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm1020e_switch_mm); +void cpu_arm1020e_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm1020e_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_ARM1022 +void cpu_arm1022_proc_init(void); +__ADDRESSABLE(cpu_arm1022_proc_init); +void cpu_arm1022_proc_fin(void); +__ADDRESSABLE(cpu_arm1022_proc_fin); +void cpu_arm1022_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm1022_reset); +int cpu_arm1022_do_idle(void); +__ADDRESSABLE(cpu_arm1022_do_idle); +void cpu_arm1022_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm1022_dcache_clean_area); +void cpu_arm1022_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm1022_switch_mm); +void cpu_arm1022_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm1022_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_ARM1026 +void cpu_arm1026_proc_init(void); +__ADDRESSABLE(cpu_arm1026_proc_init); +void cpu_arm1026_proc_fin(void); +__ADDRESSABLE(cpu_arm1026_proc_fin); +void cpu_arm1026_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_arm1026_reset); +int cpu_arm1026_do_idle(void); +__ADDRESSABLE(cpu_arm1026_do_idle); +void cpu_arm1026_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_arm1026_dcache_clean_area); +void cpu_arm1026_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_arm1026_switch_mm); +void cpu_arm1026_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_arm1026_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_SA110 +void cpu_sa110_proc_init(void); +__ADDRESSABLE(cpu_sa110_proc_init); +void cpu_sa110_proc_fin(void); +__ADDRESSABLE(cpu_sa110_proc_fin); +void cpu_sa110_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_sa110_reset); +int cpu_sa110_do_idle(void); +__ADDRESSABLE(cpu_sa110_do_idle); +void cpu_sa110_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_sa110_dcache_clean_area); +void cpu_sa110_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_sa110_switch_mm); +void cpu_sa110_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_sa110_set_pte_ext); +#endif + +#ifdef CONFIG_CPU_SA1100 +void cpu_sa1100_proc_init(void); +__ADDRESSABLE(cpu_sa1100_proc_init); +void cpu_sa1100_proc_fin(void); +__ADDRESSABLE(cpu_sa1100_proc_fin); +void cpu_sa1100_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_sa1100_reset); +int cpu_sa1100_do_idle(void); +__ADDRESSABLE(cpu_sa1100_do_idle); +void cpu_sa1100_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_sa1100_dcache_clean_area); +void cpu_sa1100_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_sa1100_switch_mm); +void cpu_sa1100_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_sa1100_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_sa1100_do_suspend(void *); +__ADDRESSABLE(cpu_sa1100_do_suspend); +void cpu_sa1100_do_resume(void *); +__ADDRESSABLE(cpu_sa1100_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_SA1100 */ + +#ifdef CONFIG_CPU_XSCALE +void cpu_xscale_proc_init(void); +__ADDRESSABLE(cpu_xscale_proc_init); +void cpu_xscale_proc_fin(void); +__ADDRESSABLE(cpu_xscale_proc_fin); +void cpu_xscale_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_xscale_reset); +int cpu_xscale_do_idle(void); +__ADDRESSABLE(cpu_xscale_do_idle); +void cpu_xscale_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_xscale_dcache_clean_area); +void cpu_xscale_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_xscale_switch_mm); +void cpu_xscale_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_xscale_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_xscale_do_suspend(void *); +__ADDRESSABLE(cpu_xscale_do_suspend); +void cpu_xscale_do_resume(void *); +__ADDRESSABLE(cpu_xscale_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_XSCALE */ + +#ifdef CONFIG_CPU_XSC3 +void cpu_xsc3_proc_init(void); +__ADDRESSABLE(cpu_xsc3_proc_init); +void cpu_xsc3_proc_fin(void); +__ADDRESSABLE(cpu_xsc3_proc_fin); +void cpu_xsc3_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_xsc3_reset); +int cpu_xsc3_do_idle(void); +__ADDRESSABLE(cpu_xsc3_do_idle); +void cpu_xsc3_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_xsc3_dcache_clean_area); +void cpu_xsc3_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_xsc3_switch_mm); +void cpu_xsc3_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_xsc3_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_xsc3_do_suspend(void *); +__ADDRESSABLE(cpu_xsc3_do_suspend); +void cpu_xsc3_do_resume(void *); +__ADDRESSABLE(cpu_xsc3_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_XSC3 */ + +#ifdef CONFIG_CPU_MOHAWK +void cpu_mohawk_proc_init(void); +__ADDRESSABLE(cpu_mohawk_proc_init); +void cpu_mohawk_proc_fin(void); +__ADDRESSABLE(cpu_mohawk_proc_fin); +void cpu_mohawk_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_mohawk_reset); +int cpu_mohawk_do_idle(void); +__ADDRESSABLE(cpu_mohawk_do_idle); +void cpu_mohawk_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_mohawk_dcache_clean_area); +void cpu_mohawk_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_mohawk_switch_mm); +void cpu_mohawk_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_mohawk_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_mohawk_do_suspend(void *); +__ADDRESSABLE(cpu_mohawk_do_suspend); +void cpu_mohawk_do_resume(void *); +__ADDRESSABLE(cpu_mohawk_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_MOHAWK */ + +#ifdef CONFIG_CPU_FEROCEON +void cpu_feroceon_proc_init(void); +__ADDRESSABLE(cpu_feroceon_proc_init); +void cpu_feroceon_proc_fin(void); +__ADDRESSABLE(cpu_feroceon_proc_fin); +void cpu_feroceon_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_feroceon_reset); +int cpu_feroceon_do_idle(void); +__ADDRESSABLE(cpu_feroceon_do_idle); +void cpu_feroceon_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_feroceon_dcache_clean_area); +void cpu_feroceon_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_feroceon_switch_mm); +void cpu_feroceon_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_feroceon_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_feroceon_do_suspend(void *); +__ADDRESSABLE(cpu_feroceon_do_suspend); +void cpu_feroceon_do_resume(void *); +__ADDRESSABLE(cpu_feroceon_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_FEROCEON */ + +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) +void cpu_v6_proc_init(void); +__ADDRESSABLE(cpu_v6_proc_init); +void cpu_v6_proc_fin(void); +__ADDRESSABLE(cpu_v6_proc_fin); +void cpu_v6_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_v6_reset); +int cpu_v6_do_idle(void); +__ADDRESSABLE(cpu_v6_do_idle); +void cpu_v6_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_v6_dcache_clean_area); +void cpu_v6_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_v6_switch_mm); +void cpu_v6_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_v6_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_v6_do_suspend(void *); +__ADDRESSABLE(cpu_v6_do_suspend); +void cpu_v6_do_resume(void *); +__ADDRESSABLE(cpu_v6_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CPU_V6 */ + +#ifdef CONFIG_CPU_V7 +void cpu_v7_proc_init(void); +__ADDRESSABLE(cpu_v7_proc_init); +void cpu_v7_proc_fin(void); +__ADDRESSABLE(cpu_v7_proc_fin); +void cpu_v7_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_v7_reset); +int cpu_v7_do_idle(void); +__ADDRESSABLE(cpu_v7_do_idle); +#ifdef CONFIG_PJ4B_ERRATA_4742 +int cpu_pj4b_do_idle(void); +__ADDRESSABLE(cpu_pj4b_do_idle); +#endif +void cpu_v7_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_v7_dcache_clean_area); +void cpu_v7_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +/* Special switch_mm() callbacks to work around bugs in v7 */ +__ADDRESSABLE(cpu_v7_switch_mm); +void cpu_v7_iciallu_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_v7_iciallu_switch_mm); +void cpu_v7_bpiall_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_v7_bpiall_switch_mm); +#ifdef CONFIG_ARM_LPAE +void cpu_v7_set_pte_ext(pte_t *ptep, pte_t pte); +#else +void cpu_v7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +#endif +__ADDRESSABLE(cpu_v7_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_v7_do_suspend(void *); +__ADDRESSABLE(cpu_v7_do_suspend); +void cpu_v7_do_resume(void *); +__ADDRESSABLE(cpu_v7_do_resume); +/* Special versions of suspend and resume for the CA9MP cores */ +void cpu_ca9mp_do_suspend(void *); +__ADDRESSABLE(cpu_ca9mp_do_suspend); +void cpu_ca9mp_do_resume(void *); +__ADDRESSABLE(cpu_ca9mp_do_resume); +/* Special versions of suspend and resume for the Marvell PJ4B cores */ +#ifdef CONFIG_CPU_PJ4B +void cpu_pj4b_do_suspend(void *); +__ADDRESSABLE(cpu_pj4b_do_suspend); +void cpu_pj4b_do_resume(void *); +__ADDRESSABLE(cpu_pj4b_do_resume); +#endif /* CONFIG_CPU_PJ4B */ +#endif /* CONFIG_ARM_CPU_SUSPEND */ +#endif /* CONFIG_CPU_V7 */ + +#ifdef CONFIG_CPU_V7M +void cpu_v7m_proc_init(void); +__ADDRESSABLE(cpu_v7m_proc_init); +void cpu_v7m_proc_fin(void); +__ADDRESSABLE(cpu_v7m_proc_fin); +void cpu_v7m_reset(unsigned long addr, bool hvc); +__ADDRESSABLE(cpu_v7m_reset); +int cpu_v7m_do_idle(void); +__ADDRESSABLE(cpu_v7m_do_idle); +void cpu_v7m_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_v7m_dcache_clean_area); +void cpu_v7m_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +__ADDRESSABLE(cpu_v7m_switch_mm); +void cpu_v7m_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +__ADDRESSABLE(cpu_v7m_set_pte_ext); +#ifdef CONFIG_ARM_CPU_SUSPEND +void cpu_v7m_do_suspend(void *); +__ADDRESSABLE(cpu_v7m_do_suspend); +void cpu_v7m_do_resume(void *); +__ADDRESSABLE(cpu_v7m_do_resume); +#endif /* CONFIG_ARM_CPU_SUSPEND */ +void cpu_cm7_proc_fin(void); +__ADDRESSABLE(cpu_cm7_proc_fin); +void cpu_cm7_dcache_clean_area(void *addr, int size); +__ADDRESSABLE(cpu_cm7_dcache_clean_area); +#endif /* CONFIG_CPU_V7M */ diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S index def6161ec452..85a6fe766b21 100644 --- a/arch/arm/mm/tlb-fa.S +++ b/arch/arm/mm/tlb-fa.S @@ -15,6 +15,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> @@ -31,7 +32,7 @@ * - mm - mm_struct describing address space */ .align 4 -ENTRY(fa_flush_user_tlb_range) +SYM_TYPED_FUNC_START(fa_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? @@ -46,9 +47,10 @@ ENTRY(fa_flush_user_tlb_range) blo 1b mcr p15, 0, r3, c7, c10, 4 @ data write barrier ret lr +SYM_FUNC_END(fa_flush_user_tlb_range) -ENTRY(fa_flush_kern_tlb_range) +SYM_TYPED_FUNC_START(fa_flush_kern_tlb_range) mov r3, #0 mcr p15, 0, r3, c7, c10, 4 @ drain WB bic r0, r0, #0x0ff @@ -60,8 +62,4 @@ ENTRY(fa_flush_kern_tlb_range) mcr p15, 0, r3, c7, c10, 4 @ data write barrier mcr p15, 0, r3, c7, c5, 4 @ prefetch flush (isb) ret lr - - __INITDATA - - /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ - define_tlb_functions fa, fa_tlb_flags +SYM_FUNC_END(fa_flush_kern_tlb_range) diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S index b962b4e75158..09ff69008d94 100644 --- a/arch/arm/mm/tlb-v4.S +++ b/arch/arm/mm/tlb-v4.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> @@ -27,7 +28,7 @@ * - mm - mm_struct describing address space */ .align 5 -ENTRY(v4_flush_user_tlb_range) +SYM_TYPED_FUNC_START(v4_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? @@ -40,6 +41,7 @@ ENTRY(v4_flush_user_tlb_range) cmp r0, r1 blo 1b ret lr +SYM_FUNC_END(v4_flush_user_tlb_range) /* * v4_flush_kern_tlb_range(start, end) @@ -50,10 +52,11 @@ ENTRY(v4_flush_user_tlb_range) * - start - virtual address (may not be aligned) * - end - virtual address (may not be aligned) */ +#ifdef CONFIG_CFI_CLANG +SYM_TYPED_FUNC_START(v4_flush_kern_tlb_range) + b .v4_flush_kern_tlb_range +SYM_FUNC_END(v4_flush_kern_tlb_range) +#else .globl v4_flush_kern_tlb_range .equ v4_flush_kern_tlb_range, .v4_flush_kern_tlb_range - - __INITDATA - - /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ - define_tlb_functions v4, v4_tlb_flags +#endif diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S index 9348bba7586a..04e46c359e75 100644 --- a/arch/arm/mm/tlb-v4wb.S +++ b/arch/arm/mm/tlb-v4wb.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> @@ -27,7 +28,7 @@ * - mm - mm_struct describing address space */ .align 5 -ENTRY(v4wb_flush_user_tlb_range) +SYM_TYPED_FUNC_START(v4wb_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? @@ -43,6 +44,7 @@ ENTRY(v4wb_flush_user_tlb_range) cmp r0, r1 blo 1b ret lr +SYM_FUNC_END(v4wb_flush_user_tlb_range) /* * v4_flush_kern_tlb_range(start, end) @@ -53,7 +55,7 @@ ENTRY(v4wb_flush_user_tlb_range) * - start - virtual address (may not be aligned) * - end - virtual address (may not be aligned) */ -ENTRY(v4wb_flush_kern_tlb_range) +SYM_TYPED_FUNC_START(v4wb_flush_kern_tlb_range) mov r3, #0 mcr p15, 0, r3, c7, c10, 4 @ drain WB bic r0, r0, #0x0ff @@ -64,8 +66,4 @@ ENTRY(v4wb_flush_kern_tlb_range) cmp r0, r1 blo 1b ret lr - - __INITDATA - - /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ - define_tlb_functions v4wb, v4wb_tlb_flags +SYM_FUNC_END(v4wb_flush_kern_tlb_range) diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S index d4f9040a4111..502dfe5628a3 100644 --- a/arch/arm/mm/tlb-v4wbi.S +++ b/arch/arm/mm/tlb-v4wbi.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> @@ -26,7 +27,7 @@ * - mm - mm_struct describing address space */ .align 5 -ENTRY(v4wbi_flush_user_tlb_range) +SYM_TYPED_FUNC_START(v4wbi_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? @@ -43,8 +44,9 @@ ENTRY(v4wbi_flush_user_tlb_range) cmp r0, r1 blo 1b ret lr +SYM_FUNC_END(v4wbi_flush_user_tlb_range) -ENTRY(v4wbi_flush_kern_tlb_range) +SYM_TYPED_FUNC_START(v4wbi_flush_kern_tlb_range) mov r3, #0 mcr p15, 0, r3, c7, c10, 4 @ drain WB bic r0, r0, #0x0ff @@ -55,8 +57,4 @@ ENTRY(v4wbi_flush_kern_tlb_range) cmp r0, r1 blo 1b ret lr - - __INITDATA - - /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ - define_tlb_functions v4wbi, v4wbi_tlb_flags +SYM_FUNC_END(v4wbi_flush_kern_tlb_range) diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 1d91e49b2c2d..8256a67ac654 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -9,6 +9,7 @@ */ #include <linux/init.h> #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/asm-offsets.h> #include <asm/assembler.h> #include <asm/page.h> @@ -32,7 +33,7 @@ * - the "Invalidate single entry" instruction will invalidate * both the I and the D TLBs on Harvard-style TLBs */ -ENTRY(v6wbi_flush_user_tlb_range) +SYM_TYPED_FUNC_START(v6wbi_flush_user_tlb_range) vma_vm_mm r3, r2 @ get vma->vm_mm mov ip, #0 mmid r3, r3 @ get vm_mm->context.id @@ -56,6 +57,7 @@ ENTRY(v6wbi_flush_user_tlb_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier ret lr +SYM_FUNC_END(v6wbi_flush_user_tlb_range) /* * v6wbi_flush_kern_tlb_range(start,end) @@ -65,7 +67,7 @@ ENTRY(v6wbi_flush_user_tlb_range) * - start - start address (may not be aligned) * - end - end address (exclusive, may not be aligned) */ -ENTRY(v6wbi_flush_kern_tlb_range) +SYM_TYPED_FUNC_START(v6wbi_flush_kern_tlb_range) mov r2, #0 mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mov r0, r0, lsr #PAGE_SHIFT @ align address @@ -85,8 +87,4 @@ ENTRY(v6wbi_flush_kern_tlb_range) mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier mcr p15, 0, r2, c7, c5, 4 @ prefetch flush (isb) ret lr - - __INIT - - /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ - define_tlb_functions v6wbi, v6wbi_tlb_flags +SYM_FUNC_END(v6wbi_flush_kern_tlb_range) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 35fd6d4f0d03..f1aa0764a2cc 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -10,6 +10,7 @@ */ #include <linux/init.h> #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/page.h> @@ -31,7 +32,7 @@ * - the "Invalidate single entry" instruction will invalidate * both the I and the D TLBs on Harvard-style TLBs */ -ENTRY(v7wbi_flush_user_tlb_range) +SYM_TYPED_FUNC_START(v7wbi_flush_user_tlb_range) vma_vm_mm r3, r2 @ get vma->vm_mm mmid r3, r3 @ get vm_mm->context.id dsb ish @@ -57,7 +58,7 @@ ENTRY(v7wbi_flush_user_tlb_range) blo 1b dsb ish ret lr -ENDPROC(v7wbi_flush_user_tlb_range) +SYM_FUNC_END(v7wbi_flush_user_tlb_range) /* * v7wbi_flush_kern_tlb_range(start,end) @@ -67,7 +68,7 @@ ENDPROC(v7wbi_flush_user_tlb_range) * - start - start address (may not be aligned) * - end - end address (exclusive, may not be aligned) */ -ENTRY(v7wbi_flush_kern_tlb_range) +SYM_TYPED_FUNC_START(v7wbi_flush_kern_tlb_range) dsb ish mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT @@ -86,9 +87,4 @@ ENTRY(v7wbi_flush_kern_tlb_range) dsb ish isb ret lr -ENDPROC(v7wbi_flush_kern_tlb_range) - - __INIT - - /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ - define_tlb_functions v7wbi, v7wbi_tlb_flags_up, flags_smp=v7wbi_tlb_flags_smp +SYM_FUNC_END(v7wbi_flush_kern_tlb_range) diff --git a/arch/arm/mm/tlb.c b/arch/arm/mm/tlb.c new file mode 100644 index 000000000000..42359793120b --- /dev/null +++ b/arch/arm/mm/tlb.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright 2024 Google LLC +// Author: Ard Biesheuvel <ardb@google.com> + +#include <linux/types.h> +#include <asm/tlbflush.h> + +#ifdef CONFIG_CPU_TLB_V4WT +void v4_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +void v4_flush_kern_tlb_range(unsigned long, unsigned long); + +struct cpu_tlb_fns v4_tlb_fns __initconst = { + .flush_user_range = v4_flush_user_tlb_range, + .flush_kern_range = v4_flush_kern_tlb_range, + .tlb_flags = v4_tlb_flags, +}; +#endif + +#ifdef CONFIG_CPU_TLB_V4WB +void v4wb_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +void v4wb_flush_kern_tlb_range(unsigned long, unsigned long); + +struct cpu_tlb_fns v4wb_tlb_fns __initconst = { + .flush_user_range = v4wb_flush_user_tlb_range, + .flush_kern_range = v4wb_flush_kern_tlb_range, + .tlb_flags = v4wb_tlb_flags, +}; +#endif + +#if defined(CONFIG_CPU_TLB_V4WBI) || defined(CONFIG_CPU_TLB_FEROCEON) +void v4wbi_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +void v4wbi_flush_kern_tlb_range(unsigned long, unsigned long); + +struct cpu_tlb_fns v4wbi_tlb_fns __initconst = { + .flush_user_range = v4wbi_flush_user_tlb_range, + .flush_kern_range = v4wbi_flush_kern_tlb_range, + .tlb_flags = v4wbi_tlb_flags, +}; +#endif + +#ifdef CONFIG_CPU_TLB_V6 +void v6wbi_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +void v6wbi_flush_kern_tlb_range(unsigned long, unsigned long); + +struct cpu_tlb_fns v6wbi_tlb_fns __initconst = { + .flush_user_range = v6wbi_flush_user_tlb_range, + .flush_kern_range = v6wbi_flush_kern_tlb_range, + .tlb_flags = v6wbi_tlb_flags, +}; +#endif + +#ifdef CONFIG_CPU_TLB_V7 +void v7wbi_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +void v7wbi_flush_kern_tlb_range(unsigned long, unsigned long); + +struct cpu_tlb_fns v7wbi_tlb_fns __initconst = { + .flush_user_range = v7wbi_flush_user_tlb_range, + .flush_kern_range = v7wbi_flush_kern_tlb_range, + .tlb_flags = IS_ENABLED(CONFIG_SMP) ? v7wbi_tlb_flags_smp + : v7wbi_tlb_flags_up, +}; + +#ifdef CONFIG_SMP_ON_UP +/* This will be run-time patched so the offset better be right */ +static_assert(offsetof(struct cpu_tlb_fns, tlb_flags) == 8); + +asm(" .pushsection \".alt.smp.init\", \"a\" \n" \ + " .align 2 \n" \ + " .long v7wbi_tlb_fns + 8 - . \n" \ + " .long " __stringify(v7wbi_tlb_flags_up) " \n" \ + " .popsection \n"); +#endif +#endif + +#ifdef CONFIG_CPU_TLB_FA +void fa_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +void fa_flush_kern_tlb_range(unsigned long, unsigned long); + +struct cpu_tlb_fns fa_tlb_fns __initconst = { + .flush_user_range = fa_flush_user_tlb_range, + .flush_kern_range = fa_flush_kern_tlb_range, + .tlb_flags = fa_tlb_flags, +}; +#endif diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 1d672457d02f..deeb8f292454 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -871,16 +871,11 @@ static inline void emit_a32_alu_r64(const bool is64, const s8 dst[], } /* dst = src (4 bytes)*/ -static inline void emit_a32_mov_r(const s8 dst, const s8 src, const u8 off, - struct jit_ctx *ctx) { +static inline void emit_a32_mov_r(const s8 dst, const s8 src, struct jit_ctx *ctx) { const s8 *tmp = bpf2a32[TMP_REG_1]; s8 rt; rt = arm_bpf_get_reg32(src, tmp[0], ctx); - if (off && off != 32) { - emit(ARM_LSL_I(rt, rt, 32 - off), ctx); - emit(ARM_ASR_I(rt, rt, 32 - off), ctx); - } arm_bpf_put_reg32(dst, rt, ctx); } @@ -889,15 +884,15 @@ static inline void emit_a32_mov_r64(const bool is64, const s8 dst[], const s8 src[], struct jit_ctx *ctx) { if (!is64) { - emit_a32_mov_r(dst_lo, src_lo, 0, ctx); + emit_a32_mov_r(dst_lo, src_lo, ctx); if (!ctx->prog->aux->verifier_zext) /* Zero out high 4 bytes */ emit_a32_mov_i(dst_hi, 0, ctx); } else if (__LINUX_ARM_ARCH__ < 6 && ctx->cpu_architecture < CPU_ARCH_ARMv5TE) { /* complete 8 byte move */ - emit_a32_mov_r(dst_lo, src_lo, 0, ctx); - emit_a32_mov_r(dst_hi, src_hi, 0, ctx); + emit_a32_mov_r(dst_lo, src_lo, ctx); + emit_a32_mov_r(dst_hi, src_hi, ctx); } else if (is_stacked(src_lo) && is_stacked(dst_lo)) { const u8 *tmp = bpf2a32[TMP_REG_1]; @@ -917,17 +912,52 @@ static inline void emit_a32_mov_r64(const bool is64, const s8 dst[], static inline void emit_a32_movsx_r64(const bool is64, const u8 off, const s8 dst[], const s8 src[], struct jit_ctx *ctx) { const s8 *tmp = bpf2a32[TMP_REG_1]; - const s8 *rt; + s8 rs; + s8 rd; + + if (is_stacked(dst_lo)) + rd = tmp[1]; + else + rd = dst_lo; + rs = arm_bpf_get_reg32(src_lo, rd, ctx); + /* rs may be one of src[1], dst[1], or tmp[1] */ - rt = arm_bpf_get_reg64(dst, tmp, ctx); + /* Sign extend rs if needed. If off == 32, lower 32-bits of src are moved to dst and sign + * extension only happens in the upper 64 bits. + */ + if (off != 32) { + /* Sign extend rs into rd */ + emit(ARM_LSL_I(rd, rs, 32 - off), ctx); + emit(ARM_ASR_I(rd, rd, 32 - off), ctx); + } else { + rd = rs; + } + + /* Write rd to dst_lo + * + * Optimization: + * Assume: + * 1. dst == src and stacked. + * 2. off == 32 + * + * In this case src_lo was loaded into rd(tmp[1]) but rd was not sign extended as off==32. + * So, we don't need to write rd back to dst_lo as they have the same value. + * This saves us one str instruction. + */ + if (dst_lo != src_lo || off != 32) + arm_bpf_put_reg32(dst_lo, rd, ctx); - emit_a32_mov_r(dst_lo, src_lo, off, ctx); if (!is64) { if (!ctx->prog->aux->verifier_zext) /* Zero out high 4 bytes */ emit_a32_mov_i(dst_hi, 0, ctx); } else { - emit(ARM_ASR_I(rt[0], rt[1], 31), ctx); + if (is_stacked(dst_hi)) { + emit(ARM_ASR_I(tmp[0], rd, 31), ctx); + arm_bpf_put_reg32(dst_hi, tmp[0], ctx); + } else { + emit(ARM_ASR_I(dst_hi, rd, 31), ctx); + } } } @@ -2222,28 +2252,21 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) /* If building the body of the JITed code fails somehow, * we fall back to the interpretation. */ - if (build_body(&ctx) < 0) { - image_ptr = NULL; - bpf_jit_binary_free(header); - prog = orig_prog; - goto out_imms; - } + if (build_body(&ctx) < 0) + goto out_free; build_epilogue(&ctx); /* 3.) Extra pass to validate JITed Code */ - if (validate_code(&ctx)) { - image_ptr = NULL; - bpf_jit_binary_free(header); - prog = orig_prog; - goto out_imms; - } + if (validate_code(&ctx)) + goto out_free; flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx)); if (bpf_jit_enable > 1) /* there are 2 passes here */ bpf_jit_dump(prog->len, image_size, 2, ctx.target); - bpf_jit_binary_lock_ro(header); + if (bpf_jit_binary_lock_ro(header)) + goto out_free; prog->bpf_func = (void *)ctx.target; prog->jited = 1; prog->jited_len = image_size; @@ -2260,5 +2283,11 @@ out: bpf_jit_prog_release_other(prog, prog == orig_prog ? tmp : orig_prog); return prog; + +out_free: + image_ptr = NULL; + bpf_jit_binary_free(header); + prog = orig_prog; + goto out_imms; } diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 830b0be038c6..e8c7580df8ca 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # # Makefile for the linux kernel. # -ccflags-y := -I$(srctree)/$(src)/include +ccflags-y := -I$(src)/include orion-gpio-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c index d8238da095df..9fd877c87a38 100644 --- a/arch/arm/probes/kprobes/core.c +++ b/arch/arm/probes/kprobes/core.c @@ -25,7 +25,7 @@ #include <asm/cacheflush.h> #include <linux/percpu.h> #include <linux/bug.h> -#include <asm/patch.h> +#include <asm/text-patching.h> #include <asm/sections.h> #include "../decode-arm.h" diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c index 7f65048380ca..966c6042c5ad 100644 --- a/arch/arm/probes/kprobes/opt-arm.c +++ b/arch/arm/probes/kprobes/opt-arm.c @@ -14,7 +14,7 @@ /* for arm_gen_branch */ #include <asm/insn.h> /* for patch_text */ -#include <asm/patch.h> +#include <asm/text-patching.h> #include "core.h" diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 81f13bdf32f2..28b6da8ac5f6 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -9,7 +9,7 @@ gen := arch/$(ARCH)/include/generated kapi := $(gen)/asm uapi := $(gen)/uapi/asm syshdr := $(srctree)/scripts/syscallhdr.sh -sysnr := $(srctree)/$(src)/syscallnr.sh +sysnr := $(src)/syscallnr.sh systbl := $(srctree)/scripts/syscalltbl.sh syscall := $(src)/syscall.tbl diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index b6c9e01e14f5..27c1d5ebcd91 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note # # Linux system call numbers and entry vectors # @@ -475,3 +476,9 @@ 459 common lsm_get_self_attr sys_lsm_get_self_attr 460 common lsm_set_self_attr sys_lsm_set_self_attr 461 common lsm_list_modules sys_lsm_list_modules +462 common mseal sys_mseal +463 common setxattrat sys_setxattrat +464 common getxattrat sys_getxattrat +465 common listxattrat sys_listxattrat +466 common removexattrat sys_removexattrat +467 common open_tree_attr sys_open_tree_attr diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index d761bd2e2f40..cb044bfd145d 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -1,11 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 # Include the generic Makefile to check the built vdso. -include $(srctree)/lib/vdso/Makefile +include $(srctree)/lib/vdso/Makefile.include hostprogs := vdsomunge -obj-vdso := vgettimeofday.o datapage.o note.o +obj-vdso := vgettimeofday.o note.o # Build rules targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.so.raw vdso.lds @@ -33,15 +33,6 @@ else CFLAGS_vgettimeofday.o = -O2 -include $(c-gettimeofday-y) endif -# Disable gcov profiling for VDSO code -GCOV_PROFILE := n -UBSAN_SANITIZE := n - -# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in. -KCOV_INSTRUMENT := n - -KASAN_SANITIZE := n - # Force dependency $(obj)/vdso.o : $(obj)/vdso.so diff --git a/arch/arm/vdso/datapage.S b/arch/arm/vdso/datapage.S deleted file mode 100644 index 9cd73b725d9f..000000000000 --- a/arch/arm/vdso/datapage.S +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <linux/linkage.h> -#include <asm/asm-offsets.h> - - .align 2 -.L_vdso_data_ptr: - .long _start - . - VDSO_DATA_SIZE - -ENTRY(__get_datapage) - .fnstart - adr r0, .L_vdso_data_ptr - ldr r1, [r0] - add r0, r0, r1 - bx lr - .fnend -ENDPROC(__get_datapage) diff --git a/arch/arm/vdso/vdso.lds.S b/arch/arm/vdso/vdso.lds.S index 165d1d2eb76b..7c08371f4400 100644 --- a/arch/arm/vdso/vdso.lds.S +++ b/arch/arm/vdso/vdso.lds.S @@ -13,13 +13,14 @@ #include <linux/const.h> #include <asm/page.h> #include <asm/vdso.h> +#include <vdso/datapage.h> OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") OUTPUT_ARCH(arm) SECTIONS { - PROVIDE(_start = .); + VDSO_VVAR_SYMS . = SIZEOF_HEADERS; diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 3c7938fd40aa..a2f0c47e0ce7 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -62,37 +62,19 @@ #define FPSCR_C (1 << 29) #define FPSCR_V (1 << 28) -#ifdef CONFIG_AS_VFP_VMRS_FPINST - -#define fmrx(_vfp_) ({ \ - u32 __v; \ - asm(".fpu vfpv2\n" \ - "vmrs %0, " #_vfp_ \ - : "=r" (__v) : : "cc"); \ - __v; \ - }) - -#define fmxr(_vfp_,_var_) \ - asm(".fpu vfpv2\n" \ - "vmsr " #_vfp_ ", %0" \ - : : "r" (_var_) : "cc") - -#else - -#define vfpreg(_vfp_) #_vfp_ - -#define fmrx(_vfp_) ({ \ - u32 __v; \ - asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \ - : "=r" (__v) : : "cc"); \ - __v; \ - }) - -#define fmxr(_vfp_,_var_) \ - asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \ - : : "r" (_var_) : "cc") - -#endif +#define fmrx(_vfp_) ({ \ + u32 __v; \ + asm volatile (".fpu vfpv2\n" \ + "vmrs %0, " #_vfp_ \ + : "=r" (__v) : : "cc"); \ + __v; \ +}) + +#define fmxr(_vfp_, _var_) ({ \ + asm volatile (".fpu vfpv2\n" \ + "vmsr " #_vfp_ ", %0" \ + : : "r" (_var_) : "cc"); \ +}) u32 vfp_single_cpdo(u32 inst, u32 fpscr); u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs); diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index b68efe643a12..7803d50b90f8 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -56,6 +56,34 @@ extern unsigned int VFP_arch_feroceon __alias(VFP_arch); union vfp_state *vfp_current_hw_state[NR_CPUS]; /* + * Claim ownership of the VFP unit. + * + * The caller may change VFP registers until vfp_state_release() is called. + * + * local_bh_disable() is used to disable preemption and to disable VFP + * processing in softirq context. On PREEMPT_RT kernels local_bh_disable() is + * not sufficient because it only serializes soft interrupt related sections + * via a local lock, but stays preemptible. Disabling preemption is the right + * choice here as bottom half processing is always in thread context on RT + * kernels so it implicitly prevents bottom half processing as well. + */ +static void vfp_state_hold(void) +{ + if (!IS_ENABLED(CONFIG_PREEMPT_RT)) + local_bh_disable(); + else + preempt_disable(); +} + +static void vfp_state_release(void) +{ + if (!IS_ENABLED(CONFIG_PREEMPT_RT)) + local_bh_enable(); + else + preempt_enable(); +} + +/* * Is 'thread's most up to date state stored in this CPUs hardware? * Must be called from non-preemptible context. */ @@ -140,7 +168,7 @@ static void vfp_thread_copy(struct thread_info *thread) /* * When this function is called with the following 'cmd's, the following * is true while this function is being run: - * THREAD_NOFTIFY_SWTICH: + * THREAD_NOTIFY_SWITCH: * - the previously running thread will not be scheduled onto another CPU. * - the next thread to be run (v) will not be running on another CPU. * - thread->cpu is the local CPU number @@ -240,7 +268,7 @@ static void vfp_panic(char *reason, u32 inst) /* * Process bitmask of exception conditions. */ -static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs) +static int vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr) { int si_code = 0; @@ -248,8 +276,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ if (exceptions == VFP_EXCEPTION_ERROR) { vfp_panic("unhandled bounce", inst); - vfp_raise_sigfpe(FPE_FLTINV, regs); - return; + return FPE_FLTINV; } /* @@ -277,8 +304,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF); RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV); - if (si_code) - vfp_raise_sigfpe(si_code, regs); + return si_code; } /* @@ -324,6 +350,8 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) static void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) { u32 fpscr, orig_fpscr, fpsid, exceptions; + int si_code2 = 0; + int si_code = 0; pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc); @@ -369,8 +397,8 @@ static void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) * unallocated VFP instruction but with FPSCR.IXE set and not * on VFP subarch 1. */ - vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs); - return; + si_code = vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr); + goto exit; } /* @@ -394,14 +422,14 @@ static void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) */ exceptions = vfp_emulate_instruction(trigger, fpscr, regs); if (exceptions) - vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); + si_code2 = vfp_raise_exceptions(exceptions, trigger, orig_fpscr); /* * If there isn't a second FP instruction, exit now. Note that * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1. */ if ((fpexc & (FPEXC_EX | FPEXC_FP2V)) != (FPEXC_EX | FPEXC_FP2V)) - return; + goto exit; /* * The barrier() here prevents fpinst2 being read @@ -413,7 +441,13 @@ static void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) emulate: exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs); if (exceptions) - vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); + si_code = vfp_raise_exceptions(exceptions, trigger, orig_fpscr); +exit: + vfp_state_release(); + if (si_code2) + vfp_raise_sigfpe(si_code2, regs); + if (si_code) + vfp_raise_sigfpe(si_code, regs); } static void vfp_enable(void *unused) @@ -512,11 +546,9 @@ static inline void vfp_pm_init(void) { } */ void vfp_sync_hwstate(struct thread_info *thread) { - unsigned int cpu = get_cpu(); + vfp_state_hold(); - local_bh_disable(); - - if (vfp_state_in_hw(cpu, thread)) { + if (vfp_state_in_hw(raw_smp_processor_id(), thread)) { u32 fpexc = fmrx(FPEXC); /* @@ -527,8 +559,7 @@ void vfp_sync_hwstate(struct thread_info *thread) fmxr(FPEXC, fpexc); } - local_bh_enable(); - put_cpu(); + vfp_state_release(); } /* Ensure that the thread reloads the hardware VFP state on the next use. */ @@ -683,7 +714,7 @@ static int vfp_support_entry(struct pt_regs *regs, u32 trigger) if (!user_mode(regs)) return vfp_kmode_exception(regs, trigger); - local_bh_disable(); + vfp_state_hold(); fpexc = fmrx(FPEXC); /* @@ -748,6 +779,7 @@ static int vfp_support_entry(struct pt_regs *regs, u32 trigger) * replay the instruction that trapped. */ fmxr(FPEXC, fpexc); + vfp_state_release(); } else { /* Check for synchronous or asynchronous exceptions */ if (!(fpexc & (FPEXC_EX | FPEXC_DEX))) { @@ -762,17 +794,17 @@ static int vfp_support_entry(struct pt_regs *regs, u32 trigger) if (!(fpscr & FPSCR_IXE)) { if (!(fpscr & FPSCR_LENGTH_MASK)) { pr_debug("not VFP\n"); - local_bh_enable(); + vfp_state_release(); return -ENOEXEC; } fpexc |= FPEXC_DEX; } } bounce: regs->ARM_pc += 4; + /* VFP_bounce() will invoke vfp_state_release() */ VFP_bounce(trigger, fpexc, regs); } - local_bh_enable(); return 0; } @@ -837,7 +869,7 @@ void kernel_neon_begin(void) unsigned int cpu; u32 fpexc; - local_bh_disable(); + vfp_state_hold(); /* * Kernel mode NEON is only allowed outside of hardirq context with @@ -868,7 +900,7 @@ void kernel_neon_end(void) { /* Disable the NEON/VFP unit. */ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); - local_bh_enable(); + vfp_state_release(); } EXPORT_SYMBOL(kernel_neon_end); diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 309648c17f48..9da57a5b81c7 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -109,7 +109,7 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, * immediate unmapping. */ map_ops[i].status = GNTST_general_error; - unmap.host_addr = map_ops[i].host_addr, + unmap.host_addr = map_ops[i].host_addr; unmap.handle = map_ops[i].handle; map_ops[i].handle = INVALID_GRANT_HANDLE; if (map_ops[i].flags & GNTMAP_device_map) |