summaryrefslogtreecommitdiffstats
path: root/arch/ia64/hp/common/sba_iommu.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64/hp/common/sba_iommu.c')
-rw-r--r--arch/ia64/hp/common/sba_iommu.c2155
1 files changed, 0 insertions, 2155 deletions
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
deleted file mode 100644
index c4d477e8bcd4..000000000000
--- a/arch/ia64/hp/common/sba_iommu.c
+++ /dev/null
@@ -1,2155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-** IA64 System Bus Adapter (SBA) I/O MMU manager
-**
-** (c) Copyright 2002-2005 Alex Williamson
-** (c) Copyright 2002-2003 Grant Grundler
-** (c) Copyright 2002-2005 Hewlett-Packard Company
-**
-** Portions (c) 2000 Grant Grundler (from parisc I/O MMU code)
-** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
-**
-**
-**
-** This module initializes the IOC (I/O Controller) found on HP
-** McKinley machines and their successors.
-**
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/acpi.h>
-#include <linux/efi.h>
-#include <linux/nodemask.h>
-#include <linux/bitops.h> /* hweight64() */
-#include <linux/crash_dump.h>
-#include <linux/iommu-helper.h>
-#include <linux/dma-map-ops.h>
-#include <linux/prefetch.h>
-#include <linux/swiotlb.h>
-
-#include <asm/delay.h> /* ia64_get_itc() */
-#include <asm/io.h>
-#include <asm/page.h> /* PAGE_OFFSET */
-#include <asm/dma.h>
-
-#include <asm/acpi-ext.h>
-
-#define PFX "IOC: "
-
-/*
-** Enabling timing search of the pdir resource map. Output in /proc.
-** Disabled by default to optimize performance.
-*/
-#undef PDIR_SEARCH_TIMING
-
-/*
-** This option allows cards capable of 64bit DMA to bypass the IOMMU. If
-** not defined, all DMA will be 32bit and go through the TLB.
-** There's potentially a conflict in the bio merge code with us
-** advertising an iommu, but then bypassing it. Since I/O MMU bypassing
-** appears to give more performance than bio-level virtual merging, we'll
-** do the former for now. NOTE: BYPASS_SG also needs to be undef'd to
-** completely restrict DMA to the IOMMU.
-*/
-#define ALLOW_IOV_BYPASS
-
-/*
-** This option specifically allows/disallows bypassing scatterlists with
-** multiple entries. Coalescing these entries can allow better DMA streaming
-** and in some cases shows better performance than entirely bypassing the
-** IOMMU. Performance increase on the order of 1-2% sequential output/input
-** using bonnie++ on a RAID0 MD device (sym2 & mpt).
-*/
-#undef ALLOW_IOV_BYPASS_SG
-
-/*
-** If a device prefetches beyond the end of a valid pdir entry, it will cause
-** a hard failure, ie. MCA. Version 3.0 and later of the zx1 LBA should
-** disconnect on 4k boundaries and prevent such issues. If the device is
-** particularly aggressive, this option will keep the entire pdir valid such
-** that prefetching will hit a valid address. This could severely impact
-** error containment, and is therefore off by default. The page that is
-** used for spill-over is poisoned, so that should help debugging somewhat.
-*/
-#undef FULL_VALID_PDIR
-
-#define ENABLE_MARK_CLEAN
-
-/*
-** The number of debug flags is a clue - this code is fragile. NOTE: since
-** tightening the use of res_lock the resource bitmap and actual pdir are no
-** longer guaranteed to stay in sync. The sanity checking code isn't going to
-** like that.
-*/
-#undef DEBUG_SBA_INIT
-#undef DEBUG_SBA_RUN
-#undef DEBUG_SBA_RUN_SG
-#undef DEBUG_SBA_RESOURCE
-#undef ASSERT_PDIR_SANITY
-#undef DEBUG_LARGE_SG_ENTRIES
-#undef DEBUG_BYPASS
-
-#if defined(FULL_VALID_PDIR) && defined(ASSERT_PDIR_SANITY)
-#error FULL_VALID_PDIR and ASSERT_PDIR_SANITY are mutually exclusive
-#endif
-
-#define SBA_INLINE __inline__
-/* #define SBA_INLINE */
-
-#ifdef DEBUG_SBA_INIT
-#define DBG_INIT(x...) printk(x)
-#else
-#define DBG_INIT(x...)
-#endif
-
-#ifdef DEBUG_SBA_RUN
-#define DBG_RUN(x...) printk(x)
-#else
-#define DBG_RUN(x...)
-#endif
-
-#ifdef DEBUG_SBA_RUN_SG
-#define DBG_RUN_SG(x...) printk(x)
-#else
-#define DBG_RUN_SG(x...)
-#endif
-
-
-#ifdef DEBUG_SBA_RESOURCE
-#define DBG_RES(x...) printk(x)
-#else
-#define DBG_RES(x...)
-#endif
-
-#ifdef DEBUG_BYPASS
-#define DBG_BYPASS(x...) printk(x)
-#else
-#define DBG_BYPASS(x...)
-#endif
-
-#ifdef ASSERT_PDIR_SANITY
-#define ASSERT(expr) \
- if(!(expr)) { \
- printk( "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
- panic(#expr); \
- }
-#else
-#define ASSERT(expr)
-#endif
-
-/*
-** The number of pdir entries to "free" before issuing
-** a read to PCOM register to flush out PCOM writes.
-** Interacts with allocation granularity (ie 4 or 8 entries
-** allocated and free'd/purged at a time might make this
-** less interesting).
-*/
-#define DELAYED_RESOURCE_CNT 64
-
-#define PCI_DEVICE_ID_HP_SX2000_IOC 0x12ec
-
-#define ZX1_IOC_ID ((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP)
-#define ZX2_IOC_ID ((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP)
-#define REO_IOC_ID ((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP)
-#define SX1000_IOC_ID ((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP)
-#define SX2000_IOC_ID ((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP)
-
-#define ZX1_IOC_OFFSET 0x1000 /* ACPI reports SBA, we want IOC */
-
-#define IOC_FUNC_ID 0x000
-#define IOC_FCLASS 0x008 /* function class, bist, header, rev... */
-#define IOC_IBASE 0x300 /* IO TLB */
-#define IOC_IMASK 0x308
-#define IOC_PCOM 0x310
-#define IOC_TCNFG 0x318
-#define IOC_PDIR_BASE 0x320
-
-#define IOC_ROPE0_CFG 0x500
-#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */
-
-
-/* AGP GART driver looks for this */
-#define ZX1_SBA_IOMMU_COOKIE 0x0000badbadc0ffeeUL
-
-/*
-** The zx1 IOC supports 4/8/16/64KB page sizes (see TCNFG register)
-**
-** Some IOCs (sx1000) can run at the above pages sizes, but are
-** really only supported using the IOC at a 4k page size.
-**
-** iovp_size could only be greater than PAGE_SIZE if we are
-** confident the drivers really only touch the next physical
-** page iff that driver instance owns it.
-*/
-static unsigned long iovp_size;
-static unsigned long iovp_shift;
-static unsigned long iovp_mask;
-
-struct ioc {
- void __iomem *ioc_hpa; /* I/O MMU base address */
- char *res_map; /* resource map, bit == pdir entry */
- u64 *pdir_base; /* physical base address */
- unsigned long ibase; /* pdir IOV Space base */
- unsigned long imask; /* pdir IOV Space mask */
-
- unsigned long *res_hint; /* next avail IOVP - circular search */
- unsigned long dma_mask;
- spinlock_t res_lock; /* protects the resource bitmap, but must be held when */
- /* clearing pdir to prevent races with allocations. */
- unsigned int res_bitshift; /* from the RIGHT! */
- unsigned int res_size; /* size of resource map in bytes */
-#ifdef CONFIG_NUMA
- unsigned int node; /* node where this IOC lives */
-#endif
-#if DELAYED_RESOURCE_CNT > 0
- spinlock_t saved_lock; /* may want to try to get this on a separate cacheline */
- /* than res_lock for bigger systems. */
- int saved_cnt;
- struct sba_dma_pair {
- dma_addr_t iova;
- size_t size;
- } saved[DELAYED_RESOURCE_CNT];
-#endif
-
-#ifdef PDIR_SEARCH_TIMING
-#define SBA_SEARCH_SAMPLE 0x100
- unsigned long avg_search[SBA_SEARCH_SAMPLE];
- unsigned long avg_idx; /* current index into avg_search */
-#endif
-
- /* Stuff we don't need in performance path */
- struct ioc *next; /* list of IOC's in system */
- acpi_handle handle; /* for multiple IOC's */
- const char *name;
- unsigned int func_id;
- unsigned int rev; /* HW revision of chip */
- u32 iov_size;
- unsigned int pdir_size; /* in bytes, determined by IOV Space size */
- struct pci_dev *sac_only_dev;
-};
-
-static struct ioc *ioc_list, *ioc_found;
-static int reserve_sba_gart = 1;
-
-static SBA_INLINE void sba_mark_invalid(struct ioc *, dma_addr_t, size_t);
-static SBA_INLINE void sba_free_range(struct ioc *, dma_addr_t, size_t);
-
-#define sba_sg_address(sg) sg_virt((sg))
-
-#ifdef FULL_VALID_PDIR
-static u64 prefetch_spill_page;
-#endif
-
-#define GET_IOC(dev) ((dev_is_pci(dev)) \
- ? ((struct ioc *) PCI_CONTROLLER(to_pci_dev(dev))->iommu) : NULL)
-
-/*
-** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
-** (or rather not merge) DMAs into manageable chunks.
-** On parisc, this is more of the software/tuning constraint
-** rather than the HW. I/O MMU allocation algorithms can be
-** faster with smaller sizes (to some degree).
-*/
-#define DMA_CHUNK_SIZE (BITS_PER_LONG*iovp_size)
-
-#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
-
-/************************************
-** SBA register read and write support
-**
-** BE WARNED: register writes are posted.
-** (ie follow writes which must reach HW with a read)
-**
-*/
-#define READ_REG(addr) __raw_readq(addr)
-#define WRITE_REG(val, addr) __raw_writeq(val, addr)
-
-#ifdef DEBUG_SBA_INIT
-
-/**
- * sba_dump_tlb - debugging only - print IOMMU operating parameters
- * @hpa: base address of the IOMMU
- *
- * Print the size/location of the IO MMU PDIR.
- */
-static void
-sba_dump_tlb(char *hpa)
-{
- DBG_INIT("IO TLB at 0x%p\n", (void *)hpa);
- DBG_INIT("IOC_IBASE : %016lx\n", READ_REG(hpa+IOC_IBASE));
- DBG_INIT("IOC_IMASK : %016lx\n", READ_REG(hpa+IOC_IMASK));
- DBG_INIT("IOC_TCNFG : %016lx\n", READ_REG(hpa+IOC_TCNFG));
- DBG_INIT("IOC_PDIR_BASE: %016lx\n", READ_REG(hpa+IOC_PDIR_BASE));
- DBG_INIT("\n");
-}
-#endif
-
-
-#ifdef ASSERT_PDIR_SANITY
-
-/**
- * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @msg: text to print ont the output line.
- * @pide: pdir index.
- *
- * Print one entry of the IO MMU PDIR in human readable form.
- */
-static void
-sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
-{
- /* start printing from lowest pde in rval */
- u64 *ptr = &ioc->pdir_base[pide & ~(BITS_PER_LONG - 1)];
- unsigned long *rptr = (unsigned long *) &ioc->res_map[(pide >>3) & -sizeof(unsigned long)];
- uint rcnt;
-
- printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
- msg, rptr, pide & (BITS_PER_LONG - 1), *rptr);
-
- rcnt = 0;
- while (rcnt < BITS_PER_LONG) {
- printk(KERN_DEBUG "%s %2d %p %016Lx\n",
- (rcnt == (pide & (BITS_PER_LONG - 1)))
- ? " -->" : " ",
- rcnt, ptr, (unsigned long long) *ptr );
- rcnt++;
- ptr++;
- }
- printk(KERN_DEBUG "%s", msg);
-}
-
-
-/**
- * sba_check_pdir - debugging only - consistency checker
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @msg: text to print ont the output line.
- *
- * Verify the resource map and pdir state is consistent
- */
-static int
-sba_check_pdir(struct ioc *ioc, char *msg)
-{
- u64 *rptr_end = (u64 *) &(ioc->res_map[ioc->res_size]);
- u64 *rptr = (u64 *) ioc->res_map; /* resource map ptr */
- u64 *pptr = ioc->pdir_base; /* pdir ptr */
- uint pide = 0;
-
- while (rptr < rptr_end) {
- u64 rval;
- int rcnt; /* number of bits we might check */
-
- rval = *rptr;
- rcnt = 64;
-
- while (rcnt) {
- /* Get last byte and highest bit from that */
- u32 pde = ((u32)((*pptr >> (63)) & 0x1));
- if ((rval & 0x1) ^ pde)
- {
- /*
- ** BUMMER! -- res_map != pdir --
- ** Dump rval and matching pdir entries
- */
- sba_dump_pdir_entry(ioc, msg, pide);
- return(1);
- }
- rcnt--;
- rval >>= 1; /* try the next bit */
- pptr++;
- pide++;
- }
- rptr++; /* look at next word of res_map */
- }
- /* It'd be nice if we always got here :^) */
- return 0;
-}
-
-
-/**
- * sba_dump_sg - debugging only - print Scatter-Gather list
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @startsg: head of the SG list
- * @nents: number of entries in SG list
- *
- * print the SG list so we can verify it's correct by hand.
- */
-static void
-sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
-{
- while (nents-- > 0) {
- printk(KERN_DEBUG " %d : DMA %08lx/%05x CPU %p\n", nents,
- startsg->dma_address, startsg->dma_length,
- sba_sg_address(startsg));
- startsg = sg_next(startsg);
- }
-}
-
-static void
-sba_check_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
-{
- struct scatterlist *the_sg = startsg;
- int the_nents = nents;
-
- while (the_nents-- > 0) {
- if (sba_sg_address(the_sg) == 0x0UL)
- sba_dump_sg(NULL, startsg, nents);
- the_sg = sg_next(the_sg);
- }
-}
-
-#endif /* ASSERT_PDIR_SANITY */
-
-
-
-
-/**************************************************************
-*
-* I/O Pdir Resource Management
-*
-* Bits set in the resource map are in use.
-* Each bit can represent a number of pages.
-* LSbs represent lower addresses (IOVA's).
-*
-***************************************************************/
-#define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */
-
-/* Convert from IOVP to IOVA and vice versa. */
-#define SBA_IOVA(ioc,iovp,offset) ((ioc->ibase) | (iovp) | (offset))
-#define SBA_IOVP(ioc,iova) ((iova) & ~(ioc->ibase))
-
-#define PDIR_ENTRY_SIZE sizeof(u64)
-
-#define PDIR_INDEX(iovp) ((iovp)>>iovp_shift)
-
-#define RESMAP_MASK(n) ~(~0UL << (n))
-#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
-
-
-/**
- * For most cases the normal get_order is sufficient, however it limits us
- * to PAGE_SIZE being the minimum mapping alignment and TC flush granularity.
- * It only incurs about 1 clock cycle to use this one with the static variable
- * and makes the code more intuitive.
- */
-static SBA_INLINE int
-get_iovp_order (unsigned long size)
-{
- long double d = size - 1;
- long order;
-
- order = ia64_getf_exp(d);
- order = order - iovp_shift - 0xffff + 1;
- if (order < 0)
- order = 0;
- return order;
-}
-
-static unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr,
- unsigned int bitshiftcnt)
-{
- return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3)
- + bitshiftcnt;
-}
-
-/**
- * sba_search_bitmap - find free space in IO PDIR resource bitmap
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @bits_wanted: number of entries we need.
- * @use_hint: use res_hint to indicate where to start looking
- *
- * Find consecutive free bits in resource bitmap.
- * Each bit represents one entry in the IO Pdir.
- * Cool perf optimization: search for log2(size) bits at a time.
- */
-static SBA_INLINE unsigned long
-sba_search_bitmap(struct ioc *ioc, struct device *dev,
- unsigned long bits_wanted, int use_hint)
-{
- unsigned long *res_ptr;
- unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
- unsigned long flags, pide = ~0UL, tpide;
- unsigned long boundary_size;
- unsigned long shift;
- int ret;
-
- ASSERT(((unsigned long) ioc->res_hint & (sizeof(unsigned long) - 1UL)) == 0);
- ASSERT(res_ptr < res_end);
-
- boundary_size = dma_get_seg_boundary_nr_pages(dev, iovp_shift);
-
- BUG_ON(ioc->ibase & ~iovp_mask);
- shift = ioc->ibase >> iovp_shift;
-
- spin_lock_irqsave(&ioc->res_lock, flags);
-
- /* Allow caller to force a search through the entire resource space */
- if (likely(use_hint)) {
- res_ptr = ioc->res_hint;
- } else {
- res_ptr = (ulong *)ioc->res_map;
- ioc->res_bitshift = 0;
- }
-
- /*
- * N.B. REO/Grande defect AR2305 can cause TLB fetch timeouts
- * if a TLB entry is purged while in use. sba_mark_invalid()
- * purges IOTLB entries in power-of-two sizes, so we also
- * allocate IOVA space in power-of-two sizes.
- */
- bits_wanted = 1UL << get_iovp_order(bits_wanted << iovp_shift);
-
- if (likely(bits_wanted == 1)) {
- unsigned int bitshiftcnt;
- for(; res_ptr < res_end ; res_ptr++) {
- if (likely(*res_ptr != ~0UL)) {
- bitshiftcnt = ffz(*res_ptr);
- *res_ptr |= (1UL << bitshiftcnt);
- pide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
- ioc->res_bitshift = bitshiftcnt + bits_wanted;
- goto found_it;
- }
- }
- goto not_found;
-
- }
-
- if (likely(bits_wanted <= BITS_PER_LONG/2)) {
- /*
- ** Search the resource bit map on well-aligned values.
- ** "o" is the alignment.
- ** We need the alignment to invalidate I/O TLB using
- ** SBA HW features in the unmap path.
- */
- unsigned long o = 1 << get_iovp_order(bits_wanted << iovp_shift);
- uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
- unsigned long mask, base_mask;
-
- base_mask = RESMAP_MASK(bits_wanted);
- mask = base_mask << bitshiftcnt;
-
- DBG_RES("%s() o %ld %p", __func__, o, res_ptr);
- for(; res_ptr < res_end ; res_ptr++)
- {
- DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
- ASSERT(0 != mask);
- for (; mask ; mask <<= o, bitshiftcnt += o) {
- tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
- ret = iommu_is_span_boundary(tpide, bits_wanted,
- shift,
- boundary_size);
- if ((0 == ((*res_ptr) & mask)) && !ret) {
- *res_ptr |= mask; /* mark resources busy! */
- pide = tpide;
- ioc->res_bitshift = bitshiftcnt + bits_wanted;
- goto found_it;
- }
- }
-
- bitshiftcnt = 0;
- mask = base_mask;
-
- }
-
- } else {
- int qwords, bits, i;
- unsigned long *end;
-
- qwords = bits_wanted >> 6; /* /64 */
- bits = bits_wanted - (qwords * BITS_PER_LONG);
-
- end = res_end - qwords;
-
- for (; res_ptr < end; res_ptr++) {
- tpide = ptr_to_pide(ioc, res_ptr, 0);
- ret = iommu_is_span_boundary(tpide, bits_wanted,
- shift, boundary_size);
- if (ret)
- goto next_ptr;
- for (i = 0 ; i < qwords ; i++) {
- if (res_ptr[i] != 0)
- goto next_ptr;
- }
- if (bits && res_ptr[i] && (__ffs(res_ptr[i]) < bits))
- continue;
-
- /* Found it, mark it */
- for (i = 0 ; i < qwords ; i++)
- res_ptr[i] = ~0UL;
- res_ptr[i] |= RESMAP_MASK(bits);
-
- pide = tpide;
- res_ptr += qwords;
- ioc->res_bitshift = bits;
- goto found_it;
-next_ptr:
- ;
- }
- }
-
-not_found:
- prefetch(ioc->res_map);
- ioc->res_hint = (unsigned long *) ioc->res_map;
- ioc->res_bitshift = 0;
- spin_unlock_irqrestore(&ioc->res_lock, flags);
- return (pide);
-
-found_it:
- ioc->res_hint = res_ptr;
- spin_unlock_irqrestore(&ioc->res_lock, flags);
- return (pide);
-}
-
-
-/**
- * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @size: number of bytes to create a mapping for
- *
- * Given a size, find consecutive unmarked and then mark those bits in the
- * resource bit map.
- */
-static int
-sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
-{
- unsigned int pages_needed = size >> iovp_shift;
-#ifdef PDIR_SEARCH_TIMING
- unsigned long itc_start;
-#endif
- unsigned long pide;
-
- ASSERT(pages_needed);
- ASSERT(0 == (size & ~iovp_mask));
-
-#ifdef PDIR_SEARCH_TIMING
- itc_start = ia64_get_itc();
-#endif
- /*
- ** "seek and ye shall find"...praying never hurts either...
- */
- pide = sba_search_bitmap(ioc, dev, pages_needed, 1);
- if (unlikely(pide >= (ioc->res_size << 3))) {
- pide = sba_search_bitmap(ioc, dev, pages_needed, 0);
- if (unlikely(pide >= (ioc->res_size << 3))) {
-#if DELAYED_RESOURCE_CNT > 0
- unsigned long flags;
-
- /*
- ** With delayed resource freeing, we can give this one more shot. We're
- ** getting close to being in trouble here, so do what we can to make this
- ** one count.
- */
- spin_lock_irqsave(&ioc->saved_lock, flags);
- if (ioc->saved_cnt > 0) {
- struct sba_dma_pair *d;
- int cnt = ioc->saved_cnt;
-
- d = &(ioc->saved[ioc->saved_cnt - 1]);
-
- spin_lock(&ioc->res_lock);
- while (cnt--) {
- sba_mark_invalid(ioc, d->iova, d->size);
- sba_free_range(ioc, d->iova, d->size);
- d--;
- }
- ioc->saved_cnt = 0;
- READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
- spin_unlock(&ioc->res_lock);
- }
- spin_unlock_irqrestore(&ioc->saved_lock, flags);
-
- pide = sba_search_bitmap(ioc, dev, pages_needed, 0);
- if (unlikely(pide >= (ioc->res_size << 3))) {
- printk(KERN_WARNING "%s: I/O MMU @ %p is"
- "out of mapping resources, %u %u %lx\n",
- __func__, ioc->ioc_hpa, ioc->res_size,
- pages_needed, dma_get_seg_boundary(dev));
- return -1;
- }
-#else
- printk(KERN_WARNING "%s: I/O MMU @ %p is"
- "out of mapping resources, %u %u %lx\n",
- __func__, ioc->ioc_hpa, ioc->res_size,
- pages_needed, dma_get_seg_boundary(dev));
- return -1;
-#endif
- }
- }
-
-#ifdef PDIR_SEARCH_TIMING
- ioc->avg_search[ioc->avg_idx++] = (ia64_get_itc() - itc_start) / pages_needed;
- ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
-#endif
-
- prefetchw(&(ioc->pdir_base[pide]));
-
-#ifdef ASSERT_PDIR_SANITY
- /* verify the first enable bit is clear */
- if(0x00 != ((u8 *) ioc->pdir_base)[pide*PDIR_ENTRY_SIZE + 7]) {
- sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
- }
-#endif
-
- DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
- __func__, size, pages_needed, pide,
- (uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
- ioc->res_bitshift );
-
- return (pide);
-}
-
-
-/**
- * sba_free_range - unmark bits in IO PDIR resource bitmap
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @iova: IO virtual address which was previously allocated.
- * @size: number of bytes to create a mapping for
- *
- * clear bits in the ioc's resource map
- */
-static SBA_INLINE void
-sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
-{
- unsigned long iovp = SBA_IOVP(ioc, iova);
- unsigned int pide = PDIR_INDEX(iovp);
- unsigned int ridx = pide >> 3; /* convert bit to byte address */
- unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
- int bits_not_wanted = size >> iovp_shift;
- unsigned long m;
-
- /* Round up to power-of-two size: see AR2305 note above */
- bits_not_wanted = 1UL << get_iovp_order(bits_not_wanted << iovp_shift);
- for (; bits_not_wanted > 0 ; res_ptr++) {
-
- if (unlikely(bits_not_wanted > BITS_PER_LONG)) {
-
- /* these mappings start 64bit aligned */
- *res_ptr = 0UL;
- bits_not_wanted -= BITS_PER_LONG;
- pide += BITS_PER_LONG;
-
- } else {
-
- /* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
- m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
- bits_not_wanted = 0;
-
- DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __func__, (uint) iova, size,
- bits_not_wanted, m, pide, res_ptr, *res_ptr);
-
- ASSERT(m != 0);
- ASSERT(bits_not_wanted);
- ASSERT((*res_ptr & m) == m); /* verify same bits are set */
- *res_ptr &= ~m;
- }
- }
-}
-
-
-/**************************************************************
-*
-* "Dynamic DMA Mapping" support (aka "Coherent I/O")
-*
-***************************************************************/
-
-/**
- * sba_io_pdir_entry - fill in one IO PDIR entry
- * @pdir_ptr: pointer to IO PDIR entry
- * @vba: Virtual CPU address of buffer to map
- *
- * SBA Mapping Routine
- *
- * Given a virtual address (vba, arg1) sba_io_pdir_entry()
- * loads the I/O PDIR entry pointed to by pdir_ptr (arg0).
- * Each IO Pdir entry consists of 8 bytes as shown below
- * (LSB == bit 0):
- *
- * 63 40 11 7 0
- * +-+---------------------+----------------------------------+----+--------+
- * |V| U | PPN[39:12] | U | FF |
- * +-+---------------------+----------------------------------+----+--------+
- *
- * V == Valid Bit
- * U == Unused
- * PPN == Physical Page Number
- *
- * The physical address fields are filled with the results of virt_to_phys()
- * on the vba.
- */
-
-#if 1
-#define sba_io_pdir_entry(pdir_ptr, vba) *pdir_ptr = ((vba & ~0xE000000000000FFFULL) \
- | 0x8000000000000000ULL)
-#else
-void SBA_INLINE
-sba_io_pdir_entry(u64 *pdir_ptr, unsigned long vba)
-{
- *pdir_ptr = ((vba & ~0xE000000000000FFFULL) | 0x80000000000000FFULL);
-}
-#endif
-
-#ifdef ENABLE_MARK_CLEAN
-/*
- * Since DMA is i-cache coherent, any (complete) pages that were written via
- * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
- * flush them when they get mapped into an executable vm-area.
- */
-static void mark_clean(void *addr, size_t size)
-{
- struct folio *folio = virt_to_folio(addr);
- ssize_t left = size;
- size_t offset = offset_in_folio(folio, addr);
-
- if (offset) {
- left -= folio_size(folio) - offset;
- if (left <= 0)
- return;
- folio = folio_next(folio);
- }
-
- while (left >= folio_size(folio)) {
- left -= folio_size(folio);
- set_bit(PG_arch_1, &folio->flags);
- if (!left)
- break;
- folio = folio_next(folio);
- }
-}
-#endif
-
-/**
- * sba_mark_invalid - invalidate one or more IO PDIR entries
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @iova: IO Virtual Address mapped earlier
- * @byte_cnt: number of bytes this mapping covers.
- *
- * Marking the IO PDIR entry(ies) as Invalid and invalidate
- * corresponding IO TLB entry. The PCOM (Purge Command Register)
- * is to purge stale entries in the IO TLB when unmapping entries.
- *
- * The PCOM register supports purging of multiple pages, with a minium
- * of 1 page and a maximum of 2GB. Hardware requires the address be
- * aligned to the size of the range being purged. The size of the range
- * must be a power of 2. The "Cool perf optimization" in the
- * allocation routine helps keep that true.
- */
-static SBA_INLINE void
-sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
-{
- u32 iovp = (u32) SBA_IOVP(ioc,iova);
-
- int off = PDIR_INDEX(iovp);
-
- /* Must be non-zero and rounded up */
- ASSERT(byte_cnt > 0);
- ASSERT(0 == (byte_cnt & ~iovp_mask));
-
-#ifdef ASSERT_PDIR_SANITY
- /* Assert first pdir entry is set */
- if (!(ioc->pdir_base[off] >> 60)) {
- sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
- }
-#endif
-
- if (byte_cnt <= iovp_size)
- {
- ASSERT(off < ioc->pdir_size);
-
- iovp |= iovp_shift; /* set "size" field for PCOM */
-
-#ifndef FULL_VALID_PDIR
- /*
- ** clear I/O PDIR entry "valid" bit
- ** Do NOT clear the rest - save it for debugging.
- ** We should only clear bits that have previously
- ** been enabled.
- */
- ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
-#else
- /*
- ** If we want to maintain the PDIR as valid, put in
- ** the spill page so devices prefetching won't
- ** cause a hard fail.
- */
- ioc->pdir_base[off] = (0x80000000000000FFULL | prefetch_spill_page);
-#endif
- } else {
- u32 t = get_iovp_order(byte_cnt) + iovp_shift;
-
- iovp |= t;
- ASSERT(t <= 31); /* 2GB! Max value of "size" field */
-
- do {
- /* verify this pdir entry is enabled */
- ASSERT(ioc->pdir_base[off] >> 63);
-#ifndef FULL_VALID_PDIR
- /* clear I/O Pdir entry "valid" bit first */
- ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
-#else
- ioc->pdir_base[off] = (0x80000000000000FFULL | prefetch_spill_page);
-#endif
- off++;
- byte_cnt -= iovp_size;
- } while (byte_cnt > 0);
- }
-
- WRITE_REG(iovp | ioc->ibase, ioc->ioc_hpa+IOC_PCOM);
-}
-
-/**
- * sba_map_page - map one buffer and return IOVA for DMA
- * @dev: instance of PCI owned by the driver that's asking.
- * @page: page to map
- * @poff: offset into page
- * @size: number of bytes to map
- * @dir: dma direction
- * @attrs: optional dma attributes
- *
- * See Documentation/core-api/dma-api-howto.rst
- */
-static dma_addr_t sba_map_page(struct device *dev, struct page *page,
- unsigned long poff, size_t size,
- enum dma_data_direction dir,
- unsigned long attrs)
-{
- struct ioc *ioc;
- void *addr = page_address(page) + poff;
- dma_addr_t iovp;
- dma_addr_t offset;
- u64 *pdir_start;
- int pide;
-#ifdef ASSERT_PDIR_SANITY
- unsigned long flags;
-#endif
-#ifdef ALLOW_IOV_BYPASS
- unsigned long pci_addr = virt_to_phys(addr);
-#endif
-
-#ifdef ALLOW_IOV_BYPASS
- ASSERT(to_pci_dev(dev)->dma_mask);
- /*
- ** Check if the PCI device can DMA to ptr... if so, just return ptr
- */
- if (likely((pci_addr & ~to_pci_dev(dev)->dma_mask) == 0)) {
- /*
- ** Device is bit capable of DMA'ing to the buffer...
- ** just return the PCI address of ptr
- */
- DBG_BYPASS("sba_map_page() bypass mask/addr: "
- "0x%lx/0x%lx\n",
- to_pci_dev(dev)->dma_mask, pci_addr);
- return pci_addr;
- }
-#endif
- ioc = GET_IOC(dev);
- ASSERT(ioc);
-
- prefetch(ioc->res_hint);
-
- ASSERT(size > 0);
- ASSERT(size <= DMA_CHUNK_SIZE);
-
- /* save offset bits */
- offset = ((dma_addr_t) (long) addr) & ~iovp_mask;
-
- /* round up to nearest iovp_size */
- size = (size + offset + ~iovp_mask) & iovp_mask;
-
-#ifdef ASSERT_PDIR_SANITY
- spin_lock_irqsave(&ioc->res_lock, flags);
- if (sba_check_pdir(ioc,"Check before sba_map_page()"))
- panic("Sanity check failed");
- spin_unlock_irqrestore(&ioc->res_lock, flags);
-#endif
-
- pide = sba_alloc_range(ioc, dev, size);
- if (pide < 0)
- return DMA_MAPPING_ERROR;
-
- iovp = (dma_addr_t) pide << iovp_shift;
-
- DBG_RUN("%s() 0x%p -> 0x%lx\n", __func__, addr, (long) iovp | offset);
-
- pdir_start = &(ioc->pdir_base[pide]);
-
- while (size > 0) {
- ASSERT(((u8 *)pdir_start)[7] == 0); /* verify availability */
- sba_io_pdir_entry(pdir_start, (unsigned long) addr);
-
- DBG_RUN(" pdir 0x%p %lx\n", pdir_start, *pdir_start);
-
- addr += iovp_size;
- size -= iovp_size;
- pdir_start++;
- }
- /* force pdir update */
- wmb();
-
- /* form complete address */
-#ifdef ASSERT_PDIR_SANITY
- spin_lock_irqsave(&ioc->res_lock, flags);
- sba_check_pdir(ioc,"Check after sba_map_page()");
- spin_unlock_irqrestore(&ioc->res_lock, flags);
-#endif
- return SBA_IOVA(ioc, iovp, offset);
-}
-
-#ifdef ENABLE_MARK_CLEAN
-static SBA_INLINE void
-sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size)
-{
- u32 iovp = (u32) SBA_IOVP(ioc,iova);
- int off = PDIR_INDEX(iovp);
- void *addr;
-
- if (size <= iovp_size) {
- addr = phys_to_virt(ioc->pdir_base[off] &
- ~0xE000000000000FFFULL);
- mark_clean(addr, size);
- } else {
- do {
- addr = phys_to_virt(ioc->pdir_base[off] &
- ~0xE000000000000FFFULL);
- mark_clean(addr, min(size, iovp_size));
- off++;
- size -= iovp_size;
- } while (size > 0);
- }
-}
-#endif
-
-/**
- * sba_unmap_page - unmap one IOVA and free resources
- * @dev: instance of PCI owned by the driver that's asking.
- * @iova: IOVA of driver buffer previously mapped.
- * @size: number of bytes mapped in driver buffer.
- * @dir: R/W or both.
- * @attrs: optional dma attributes
- *
- * See Documentation/core-api/dma-api-howto.rst
- */
-static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
- enum dma_data_direction dir, unsigned long attrs)
-{
- struct ioc *ioc;
-#if DELAYED_RESOURCE_CNT > 0
- struct sba_dma_pair *d;
-#endif
- unsigned long flags;
- dma_addr_t offset;
-
- ioc = GET_IOC(dev);
- ASSERT(ioc);
-
-#ifdef ALLOW_IOV_BYPASS
- if (likely((iova & ioc->imask) != ioc->ibase)) {
- /*
- ** Address does not fall w/in IOVA, must be bypassing
- */
- DBG_BYPASS("sba_unmap_page() bypass addr: 0x%lx\n",
- iova);
-
-#ifdef ENABLE_MARK_CLEAN
- if (dir == DMA_FROM_DEVICE) {
- mark_clean(phys_to_virt(iova), size);
- }
-#endif
- return;
- }
-#endif
- offset = iova & ~iovp_mask;
-
- DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
-
- iova ^= offset; /* clear offset bits */
- size += offset;
- size = ROUNDUP(size, iovp_size);
-
-#ifdef ENABLE_MARK_CLEAN
- if (dir == DMA_FROM_DEVICE)
- sba_mark_clean(ioc, iova, size);
-#endif
-
-#if DELAYED_RESOURCE_CNT > 0
- spin_lock_irqsave(&ioc->saved_lock, flags);
- d = &(ioc->saved[ioc->saved_cnt]);
- d->iova = iova;
- d->size = size;
- if (unlikely(++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT)) {
- int cnt = ioc->saved_cnt;
- spin_lock(&ioc->res_lock);
- while (cnt--) {
- sba_mark_invalid(ioc, d->iova, d->size);
- sba_free_range(ioc, d->iova, d->size);
- d--;
- }
- ioc->saved_cnt = 0;
- READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
- spin_unlock(&ioc->res_lock);
- }
- spin_unlock_irqrestore(&ioc->saved_lock, flags);
-#else /* DELAYED_RESOURCE_CNT == 0 */
- spin_lock_irqsave(&ioc->res_lock, flags);
- sba_mark_invalid(ioc, iova, size);
- sba_free_range(ioc, iova, size);
- READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
- spin_unlock_irqrestore(&ioc->res_lock, flags);
-#endif /* DELAYED_RESOURCE_CNT == 0 */
-}
-
-/**
- * sba_alloc_coherent - allocate/map shared mem for DMA
- * @dev: instance of PCI owned by the driver that's asking.
- * @size: number of bytes mapped in driver buffer.
- * @dma_handle: IOVA of new buffer.
- *
- * See Documentation/core-api/dma-api-howto.rst
- */
-static void *
-sba_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- gfp_t flags, unsigned long attrs)
-{
- struct page *page;
- struct ioc *ioc;
- int node = -1;
- void *addr;
-
- ioc = GET_IOC(dev);
- ASSERT(ioc);
-#ifdef CONFIG_NUMA
- node = ioc->node;
-#endif
-
- page = alloc_pages_node(node, flags, get_order(size));
- if (unlikely(!page))
- return NULL;
-
- addr = page_address(page);
- memset(addr, 0, size);
- *dma_handle = page_to_phys(page);
-
-#ifdef ALLOW_IOV_BYPASS
- ASSERT(dev->coherent_dma_mask);
- /*
- ** Check if the PCI device can DMA to ptr... if so, just return ptr
- */
- if (likely((*dma_handle & ~dev->coherent_dma_mask) == 0)) {
- DBG_BYPASS("sba_alloc_coherent() bypass mask/addr: 0x%lx/0x%lx\n",
- dev->coherent_dma_mask, *dma_handle);
-
- return addr;
- }
-#endif
-
- /*
- * If device can't bypass or bypass is disabled, pass the 32bit fake
- * device to map single to get an iova mapping.
- */
- *dma_handle = sba_map_page(&ioc->sac_only_dev->dev, page, 0, size,
- DMA_BIDIRECTIONAL, 0);
- if (dma_mapping_error(dev, *dma_handle))
- return NULL;
- return addr;
-}
-
-
-/**
- * sba_free_coherent - free/unmap shared mem for DMA
- * @dev: instance of PCI owned by the driver that's asking.
- * @size: number of bytes mapped in driver buffer.
- * @vaddr: virtual address IOVA of "consistent" buffer.
- * @dma_handler: IO virtual address of "consistent" buffer.
- *
- * See Documentation/core-api/dma-api-howto.rst
- */
-static void sba_free_coherent(struct device *dev, size_t size, void *vaddr,
- dma_addr_t dma_handle, unsigned long attrs)
-{
- sba_unmap_page(dev, dma_handle, size, 0, 0);
- free_pages((unsigned long) vaddr, get_order(size));
-}
-
-
-/*
-** Since 0 is a valid pdir_base index value, can't use that
-** to determine if a value is valid or not. Use a flag to indicate
-** the SG list entry contains a valid pdir index.
-*/
-#define PIDE_FLAG 0x1UL
-
-#ifdef DEBUG_LARGE_SG_ENTRIES
-int dump_run_sg = 0;
-#endif
-
-
-/**
- * sba_fill_pdir - write allocated SG entries into IO PDIR
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @startsg: list of IOVA/size pairs
- * @nents: number of entries in startsg list
- *
- * Take preprocessed SG list and write corresponding entries
- * in the IO PDIR.
- */
-
-static SBA_INLINE int
-sba_fill_pdir(
- struct ioc *ioc,
- struct scatterlist *startsg,
- int nents)
-{
- struct scatterlist *dma_sg = startsg; /* pointer to current DMA */
- int n_mappings = 0;
- u64 *pdirp = NULL;
- unsigned long dma_offset = 0;
-
- while (nents-- > 0) {
- int cnt = startsg->dma_length;
- startsg->dma_length = 0;
-
-#ifdef DEBUG_LARGE_SG_ENTRIES
- if (dump_run_sg)
- printk(" %2d : %08lx/%05x %p\n",
- nents, startsg->dma_address, cnt,
- sba_sg_address(startsg));
-#else
- DBG_RUN_SG(" %d : %08lx/%05x %p\n",
- nents, startsg->dma_address, cnt,
- sba_sg_address(startsg));
-#endif
- /*
- ** Look for the start of a new DMA stream
- */
- if (startsg->dma_address & PIDE_FLAG) {
- u32 pide = startsg->dma_address & ~PIDE_FLAG;
- dma_offset = (unsigned long) pide & ~iovp_mask;
- startsg->dma_address = 0;
- if (n_mappings)
- dma_sg = sg_next(dma_sg);
- dma_sg->dma_address = pide | ioc->ibase;
- pdirp = &(ioc->pdir_base[pide >> iovp_shift]);
- n_mappings++;
- }
-
- /*
- ** Look for a VCONTIG chunk
- */
- if (cnt) {
- unsigned long vaddr = (unsigned long) sba_sg_address(startsg);
- ASSERT(pdirp);
-
- /* Since multiple Vcontig blocks could make up
- ** one DMA stream, *add* cnt to dma_len.
- */
- dma_sg->dma_length += cnt;
- cnt += dma_offset;
- dma_offset=0; /* only want offset on first chunk */
- cnt = ROUNDUP(cnt, iovp_size);
- do {
- sba_io_pdir_entry(pdirp, vaddr);
- vaddr += iovp_size;
- cnt -= iovp_size;
- pdirp++;
- } while (cnt > 0);
- }
- startsg = sg_next(startsg);
- }
- /* force pdir update */
- wmb();
-
-#ifdef DEBUG_LARGE_SG_ENTRIES
- dump_run_sg = 0;
-#endif
- return(n_mappings);
-}
-
-
-/*
-** Two address ranges are DMA contiguous *iff* "end of prev" and
-** "start of next" are both on an IOV page boundary.
-**
-** (shift left is a quick trick to mask off upper bits)
-*/
-#define DMA_CONTIG(__X, __Y) \
- (((((unsigned long) __X) | ((unsigned long) __Y)) << (BITS_PER_LONG - iovp_shift)) == 0UL)
-
-
-/**
- * sba_coalesce_chunks - preprocess the SG list
- * @ioc: IO MMU structure which owns the pdir we are interested in.
- * @startsg: list of IOVA/size pairs
- * @nents: number of entries in startsg list
- *
- * First pass is to walk the SG list and determine where the breaks are
- * in the DMA stream. Allocates PDIR entries but does not fill them.
- * Returns the number of DMA chunks.
- *
- * Doing the fill separate from the coalescing/allocation keeps the
- * code simpler. Future enhancement could make one pass through
- * the sglist do both.
- */
-static SBA_INLINE int
-sba_coalesce_chunks(struct ioc *ioc, struct device *dev,
- struct scatterlist *startsg,
- int nents)
-{
- struct scatterlist *vcontig_sg; /* VCONTIG chunk head */
- unsigned long vcontig_len; /* len of VCONTIG chunk */
- unsigned long vcontig_end;
- struct scatterlist *dma_sg; /* next DMA stream head */
- unsigned long dma_offset, dma_len; /* start/len of DMA stream */
- int n_mappings = 0;
- unsigned int max_seg_size = dma_get_max_seg_size(dev);
- int idx;
-
- while (nents > 0) {
- unsigned long vaddr = (unsigned long) sba_sg_address(startsg);
-
- /*
- ** Prepare for first/next DMA stream
- */
- dma_sg = vcontig_sg = startsg;
- dma_len = vcontig_len = vcontig_end = startsg->length;
- vcontig_end += vaddr;
- dma_offset = vaddr & ~iovp_mask;
-
- /* PARANOID: clear entries */
- startsg->dma_address = startsg->dma_length = 0;
-
- /*
- ** This loop terminates one iteration "early" since
- ** it's always looking one "ahead".
- */
- while (--nents > 0) {
- unsigned long vaddr; /* tmp */
-
- startsg = sg_next(startsg);
-
- /* PARANOID */
- startsg->dma_address = startsg->dma_length = 0;
-
- /* catch brokenness in SCSI layer */
- ASSERT(startsg->length <= DMA_CHUNK_SIZE);
-
- /*
- ** First make sure current dma stream won't
- ** exceed DMA_CHUNK_SIZE if we coalesce the
- ** next entry.
- */
- if (((dma_len + dma_offset + startsg->length + ~iovp_mask) & iovp_mask)
- > DMA_CHUNK_SIZE)
- break;
-
- if (dma_len + startsg->length > max_seg_size)
- break;
-
- /*
- ** Then look for virtually contiguous blocks.
- **
- ** append the next transaction?
- */
- vaddr = (unsigned long) sba_sg_address(startsg);
- if (vcontig_end == vaddr)
- {
- vcontig_len += startsg->length;
- vcontig_end += startsg->length;
- dma_len += startsg->length;
- continue;
- }
-
-#ifdef DEBUG_LARGE_SG_ENTRIES
- dump_run_sg = (vcontig_len > iovp_size);
-#endif
-
- /*
- ** Not virtually contiguous.
- ** Terminate prev chunk.
- ** Start a new chunk.
- **
- ** Once we start a new VCONTIG chunk, dma_offset
- ** can't change. And we need the offset from the first
- ** chunk - not the last one. Ergo Successive chunks
- ** must start on page boundaries and dove tail
- ** with it's predecessor.
- */
- vcontig_sg->dma_length = vcontig_len;
-
- vcontig_sg = startsg;
- vcontig_len = startsg->length;
-
- /*
- ** 3) do the entries end/start on page boundaries?
- ** Don't update vcontig_end until we've checked.
- */
- if (DMA_CONTIG(vcontig_end, vaddr))
- {
- vcontig_end = vcontig_len + vaddr;
- dma_len += vcontig_len;
- continue;
- } else {
- break;
- }
- }
-
- /*
- ** End of DMA Stream
- ** Terminate last VCONTIG block.
- ** Allocate space for DMA stream.
- */
- vcontig_sg->dma_length = vcontig_len;
- dma_len = (dma_len + dma_offset + ~iovp_mask) & iovp_mask;
- ASSERT(dma_len <= DMA_CHUNK_SIZE);
- idx = sba_alloc_range(ioc, dev, dma_len);
- if (idx < 0) {
- dma_sg->dma_length = 0;
- return -1;
- }
- dma_sg->dma_address = (dma_addr_t)(PIDE_FLAG | (idx << iovp_shift)
- | dma_offset);
- n_mappings++;
- }
-
- return n_mappings;
-}
-
-static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
- int nents, enum dma_data_direction dir,
- unsigned long attrs);
-/**
- * sba_map_sg - map Scatter/Gather list
- * @dev: instance of PCI owned by the driver that's asking.
- * @sglist: array of buffer/length pairs
- * @nents: number of entries in list
- * @dir: R/W or both.
- * @attrs: optional dma attributes
- *
- * See Documentation/core-api/dma-api-howto.rst
- */
-static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
- int nents, enum dma_data_direction dir,
- unsigned long attrs)
-{
- struct ioc *ioc;
- int coalesced, filled = 0;
-#ifdef ASSERT_PDIR_SANITY
- unsigned long flags;
-#endif
-#ifdef ALLOW_IOV_BYPASS_SG
- struct scatterlist *sg;
-#endif
-
- DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
- ioc = GET_IOC(dev);
- ASSERT(ioc);
-
-#ifdef ALLOW_IOV_BYPASS_SG
- ASSERT(to_pci_dev(dev)->dma_mask);
- if (likely((ioc->dma_mask & ~to_pci_dev(dev)->dma_mask) == 0)) {
- for_each_sg(sglist, sg, nents, filled) {
- sg->dma_length = sg->length;
- sg->dma_address = virt_to_phys(sba_sg_address(sg));
- }
- return filled;
- }
-#endif
- /* Fast path single entry scatterlists. */
- if (nents == 1) {
- sglist->dma_length = sglist->length;
- sglist->dma_address = sba_map_page(dev, sg_page(sglist),
- sglist->offset, sglist->length, dir, attrs);
- if (dma_mapping_error(dev, sglist->dma_address))
- return -EIO;
- return 1;
- }
-
-#ifdef ASSERT_PDIR_SANITY
- spin_lock_irqsave(&ioc->res_lock, flags);
- if (sba_check_pdir(ioc,"Check before sba_map_sg_attrs()"))
- {
- sba_dump_sg(ioc, sglist, nents);
- panic("Check before sba_map_sg_attrs()");
- }
- spin_unlock_irqrestore(&ioc->res_lock, flags);
-#endif
-
- prefetch(ioc->res_hint);
-
- /*
- ** First coalesce the chunks and allocate I/O pdir space
- **
- ** If this is one DMA stream, we can properly map using the
- ** correct virtual address associated with each DMA page.
- ** w/o this association, we wouldn't have coherent DMA!
- ** Access to the virtual address is what forces a two pass algorithm.
- */
- coalesced = sba_coalesce_chunks(ioc, dev, sglist, nents);
- if (coalesced < 0) {
- sba_unmap_sg_attrs(dev, sglist, nents, dir, attrs);
- return -ENOMEM;
- }
-
- /*
- ** Program the I/O Pdir
- **
- ** map the virtual addresses to the I/O Pdir
- ** o dma_address will contain the pdir index
- ** o dma_len will contain the number of bytes to map
- ** o address contains the virtual address.
- */
- filled = sba_fill_pdir(ioc, sglist, nents);
-
-#ifdef ASSERT_PDIR_SANITY
- spin_lock_irqsave(&ioc->res_lock, flags);
- if (sba_check_pdir(ioc,"Check after sba_map_sg_attrs()"))
- {
- sba_dump_sg(ioc, sglist, nents);
- panic("Check after sba_map_sg_attrs()\n");
- }
- spin_unlock_irqrestore(&ioc->res_lock, flags);
-#endif
-
- ASSERT(coalesced == filled);
- DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
-
- return filled;
-}
-
-/**
- * sba_unmap_sg_attrs - unmap Scatter/Gather list
- * @dev: instance of PCI owned by the driver that's asking.
- * @sglist: array of buffer/length pairs
- * @nents: number of entries in list
- * @dir: R/W or both.
- * @attrs: optional dma attributes
- *
- * See Documentation/core-api/dma-api-howto.rst
- */
-static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
- int nents, enum dma_data_direction dir,
- unsigned long attrs)
-{
-#ifdef ASSERT_PDIR_SANITY
- struct ioc *ioc;
- unsigned long flags;
-#endif
-
- DBG_RUN_SG("%s() START %d entries, %p,%x\n",
- __func__, nents, sba_sg_address(sglist), sglist->length);
-
-#ifdef ASSERT_PDIR_SANITY
- ioc = GET_IOC(dev);
- ASSERT(ioc);
-
- spin_lock_irqsave(&ioc->res_lock, flags);
- sba_check_pdir(ioc,"Check before sba_unmap_sg_attrs()");
- spin_unlock_irqrestore(&ioc->res_lock, flags);
-#endif
-
- while (nents && sglist->dma_length) {
-
- sba_unmap_page(dev, sglist->dma_address, sglist->dma_length,
- dir, attrs);
- sglist = sg_next(sglist);
- nents--;
- }
-
- DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);
-
-#ifdef ASSERT_PDIR_SANITY
- spin_lock_irqsave(&ioc->res_lock, flags);
- sba_check_pdir(ioc,"Check after sba_unmap_sg_attrs()");
- spin_unlock_irqrestore(&ioc->res_lock, flags);
-#endif
-
-}
-
-/**************************************************************
-*
-* Initialization and claim
-*
-***************************************************************/
-
-static void
-ioc_iova_init(struct ioc *ioc)
-{
- int tcnfg;
- int agp_found = 0;
- struct pci_dev *device = NULL;
-#ifdef FULL_VALID_PDIR
- unsigned long index;
-#endif
-
- /*
- ** Firmware programs the base and size of a "safe IOVA space"
- ** (one that doesn't overlap memory or LMMIO space) in the
- ** IBASE and IMASK registers.
- */
- ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & ~0x1UL;
- ioc->imask = READ_REG(ioc->ioc_hpa + IOC_IMASK) | 0xFFFFFFFF00000000UL;
-
- ioc->iov_size = ~ioc->imask + 1;
-
- DBG_INIT("%s() hpa %p IOV base 0x%lx mask 0x%lx (%dMB)\n",
- __func__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
- ioc->iov_size >> 20);
-
- switch (iovp_size) {
- case 4*1024: tcnfg = 0; break;
- case 8*1024: tcnfg = 1; break;
- case 16*1024: tcnfg = 2; break;
- case 64*1024: tcnfg = 3; break;
- default:
- panic(PFX "Unsupported IOTLB page size %ldK",
- iovp_size >> 10);
- break;
- }
- WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG);
-
- ioc->pdir_size = (ioc->iov_size / iovp_size) * PDIR_ENTRY_SIZE;
- ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
- get_order(ioc->pdir_size));
- if (!ioc->pdir_base)
- panic(PFX "Couldn't allocate I/O Page Table\n");
-
- memset(ioc->pdir_base, 0, ioc->pdir_size);
-
- DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __func__,
- iovp_size >> 10, ioc->pdir_base, ioc->pdir_size);
-
- ASSERT(ALIGN((unsigned long) ioc->pdir_base, 4*1024) == (unsigned long) ioc->pdir_base);
- WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
-
- /*
- ** If an AGP device is present, only use half of the IOV space
- ** for PCI DMA. Unfortunately we can't know ahead of time
- ** whether GART support will actually be used, for now we
- ** can just key on an AGP device found in the system.
- ** We program the next pdir index after we stop w/ a key for
- ** the GART code to handshake on.
- */
- for_each_pci_dev(device)
- agp_found |= pci_find_capability(device, PCI_CAP_ID_AGP);
-
- if (agp_found && reserve_sba_gart) {
- printk(KERN_INFO PFX "reserving %dMb of IOVA space at 0x%lx for agpgart\n",
- ioc->iov_size/2 >> 20, ioc->ibase + ioc->iov_size/2);
- ioc->pdir_size /= 2;
- ((u64 *)ioc->pdir_base)[PDIR_INDEX(ioc->iov_size/2)] = ZX1_SBA_IOMMU_COOKIE;
- }
-#ifdef FULL_VALID_PDIR
- /*
- ** Check to see if the spill page has been allocated, we don't need more than
- ** one across multiple SBAs.
- */
- if (!prefetch_spill_page) {
- char *spill_poison = "SBAIOMMU POISON";
- int poison_size = 16;
- void *poison_addr, *addr;
-
- addr = (void *)__get_free_pages(GFP_KERNEL, get_order(iovp_size));
- if (!addr)
- panic(PFX "Couldn't allocate PDIR spill page\n");
-
- poison_addr = addr;
- for ( ; (u64) poison_addr < addr + iovp_size; poison_addr += poison_size)
- memcpy(poison_addr, spill_poison, poison_size);
-
- prefetch_spill_page = virt_to_phys(addr);
-
- DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __func__, prefetch_spill_page);
- }
- /*
- ** Set all the PDIR entries valid w/ the spill page as the target
- */
- for (index = 0 ; index < (ioc->pdir_size / PDIR_ENTRY_SIZE) ; index++)
- ((u64 *)ioc->pdir_base)[index] = (0x80000000000000FF | prefetch_spill_page);
-#endif
-
- /* Clear I/O TLB of any possible entries */
- WRITE_REG(ioc->ibase | (get_iovp_order(ioc->iov_size) + iovp_shift), ioc->ioc_hpa + IOC_PCOM);
- READ_REG(ioc->ioc_hpa + IOC_PCOM);
-
- /* Enable IOVA translation */
- WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);
- READ_REG(ioc->ioc_hpa + IOC_IBASE);
-}
-
-static void __init
-ioc_resource_init(struct ioc *ioc)
-{
- spin_lock_init(&ioc->res_lock);
-#if DELAYED_RESOURCE_CNT > 0
- spin_lock_init(&ioc->saved_lock);
-#endif
-
- /* resource map size dictated by pdir_size */
- ioc->res_size = ioc->pdir_size / PDIR_ENTRY_SIZE; /* entries */
- ioc->res_size >>= 3; /* convert bit count to byte count */
- DBG_INIT("%s() res_size 0x%x\n", __func__, ioc->res_size);
-
- ioc->res_map = (char *) __get_free_pages(GFP_KERNEL,
- get_order(ioc->res_size));
- if (!ioc->res_map)
- panic(PFX "Couldn't allocate resource map\n");
-
- memset(ioc->res_map, 0, ioc->res_size);
- /* next available IOVP - circular search */
- ioc->res_hint = (unsigned long *) ioc->res_map;
-
-#ifdef ASSERT_PDIR_SANITY
- /* Mark first bit busy - ie no IOVA 0 */
- ioc->res_map[0] = 0x1;
- ioc->pdir_base[0] = 0x8000000000000000ULL | ZX1_SBA_IOMMU_COOKIE;
-#endif
-#ifdef FULL_VALID_PDIR
- /* Mark the last resource used so we don't prefetch beyond IOVA space */
- ioc->res_map[ioc->res_size - 1] |= 0x80UL; /* res_map is chars */
- ioc->pdir_base[(ioc->pdir_size / PDIR_ENTRY_SIZE) - 1] = (0x80000000000000FF
- | prefetch_spill_page);
-#endif
-
- DBG_INIT("%s() res_map %x %p\n", __func__,
- ioc->res_size, (void *) ioc->res_map);
-}
-
-static void __init
-ioc_sac_init(struct ioc *ioc)
-{
- struct pci_dev *sac = NULL;
- struct pci_controller *controller = NULL;
-
- /*
- * pci_alloc_coherent() must return a DMA address which is
- * SAC (single address cycle) addressable, so allocate a
- * pseudo-device to enforce that.
- */
- sac = kzalloc(sizeof(*sac), GFP_KERNEL);
- if (!sac)
- panic(PFX "Couldn't allocate struct pci_dev");
-
- controller = kzalloc(sizeof(*controller), GFP_KERNEL);
- if (!controller)
- panic(PFX "Couldn't allocate struct pci_controller");
-
- controller->iommu = ioc;
- sac->sysdata = controller;
- sac->dma_mask = 0xFFFFFFFFUL;
- sac->dev.bus = &pci_bus_type;
- ioc->sac_only_dev = sac;
-}
-
-static void __init
-ioc_zx1_init(struct ioc *ioc)
-{
- unsigned long rope_config;
- unsigned int i;
-
- if (ioc->rev < 0x20)
- panic(PFX "IOC 2.0 or later required for IOMMU support\n");
-
- /* 38 bit memory controller + extra bit for range displaced by MMIO */
- ioc->dma_mask = (0x1UL << 39) - 1;
-
- /*
- ** Clear ROPE(N)_CONFIG AO bit.
- ** Disables "NT Ordering" (~= !"Relaxed Ordering")
- ** Overrides bit 1 in DMA Hint Sets.
- ** Improves netperf UDP_STREAM by ~10% for tg3 on bcm5701.
- */
- for (i=0; i<(8*8); i+=8) {
- rope_config = READ_REG(ioc->ioc_hpa + IOC_ROPE0_CFG + i);
- rope_config &= ~IOC_ROPE_AO;
- WRITE_REG(rope_config, ioc->ioc_hpa + IOC_ROPE0_CFG + i);
- }
-}
-
-typedef void (initfunc)(struct ioc *);
-
-struct ioc_iommu {
- u32 func_id;
- char *name;
- initfunc *init;
-};
-
-static struct ioc_iommu ioc_iommu_info[] __initdata = {
- { ZX1_IOC_ID, "zx1", ioc_zx1_init },
- { ZX2_IOC_ID, "zx2", NULL },
- { SX1000_IOC_ID, "sx1000", NULL },
- { SX2000_IOC_ID, "sx2000", NULL },
-};
-
-static void __init ioc_init(unsigned long hpa, struct ioc *ioc)
-{
- struct ioc_iommu *info;
-
- ioc->next = ioc_list;
- ioc_list = ioc;
-
- ioc->ioc_hpa = ioremap(hpa, 0x1000);
-
- ioc->func_id = READ_REG(ioc->ioc_hpa + IOC_FUNC_ID);
- ioc->rev = READ_REG(ioc->ioc_hpa + IOC_FCLASS) & 0xFFUL;
- ioc->dma_mask = 0xFFFFFFFFFFFFFFFFUL; /* conservative */
-
- for (info = ioc_iommu_info; info < ioc_iommu_info + ARRAY_SIZE(ioc_iommu_info); info++) {
- if (ioc->func_id == info->func_id) {
- ioc->name = info->name;
- if (info->init)
- (info->init)(ioc);
- }
- }
-
- iovp_size = (1 << iovp_shift);
- iovp_mask = ~(iovp_size - 1);
-
- DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __func__,
- PAGE_SIZE >> 10, iovp_size >> 10);
-
- if (!ioc->name) {
- ioc->name = kmalloc(24, GFP_KERNEL);
- if (ioc->name)
- sprintf((char *) ioc->name, "Unknown (%04x:%04x)",
- ioc->func_id & 0xFFFF, (ioc->func_id >> 16) & 0xFFFF);
- else
- ioc->name = "Unknown";
- }
-
- ioc_iova_init(ioc);
- ioc_resource_init(ioc);
- ioc_sac_init(ioc);
-
- printk(KERN_INFO PFX
- "%s %d.%d HPA 0x%lx IOVA space %dMb at 0x%lx\n",
- ioc->name, (ioc->rev >> 4) & 0xF, ioc->rev & 0xF,
- hpa, ioc->iov_size >> 20, ioc->ibase);
-}
-
-
-
-/**************************************************************************
-**
-** SBA initialization code (HW and SW)
-**
-** o identify SBA chip itself
-** o FIXME: initialize DMA hints for reasonable defaults
-**
-**************************************************************************/
-
-#ifdef CONFIG_PROC_FS
-static void *
-ioc_start(struct seq_file *s, loff_t *pos)
-{
- struct ioc *ioc;
- loff_t n = *pos;
-
- for (ioc = ioc_list; ioc; ioc = ioc->next)
- if (!n--)
- return ioc;
-
- return NULL;
-}
-
-static void *
-ioc_next(struct seq_file *s, void *v, loff_t *pos)
-{
- struct ioc *ioc = v;
-
- ++*pos;
- return ioc->next;
-}
-
-static void
-ioc_stop(struct seq_file *s, void *v)
-{
-}
-
-static int
-ioc_show(struct seq_file *s, void *v)
-{
- struct ioc *ioc = v;
- unsigned long *res_ptr = (unsigned long *)ioc->res_map;
- int i, used = 0;
-
- seq_printf(s, "Hewlett Packard %s IOC rev %d.%d\n",
- ioc->name, ((ioc->rev >> 4) & 0xF), (ioc->rev & 0xF));
-#ifdef CONFIG_NUMA
- if (ioc->node != NUMA_NO_NODE)
- seq_printf(s, "NUMA node : %d\n", ioc->node);
-#endif
- seq_printf(s, "IOVA size : %ld MB\n", ((ioc->pdir_size >> 3) * iovp_size)/(1024*1024));
- seq_printf(s, "IOVA page size : %ld kb\n", iovp_size/1024);
-
- for (i = 0; i < (ioc->res_size / sizeof(unsigned long)); ++i, ++res_ptr)
- used += hweight64(*res_ptr);
-
- seq_printf(s, "PDIR size : %d entries\n", ioc->pdir_size >> 3);
- seq_printf(s, "PDIR used : %d entries\n", used);
-
-#ifdef PDIR_SEARCH_TIMING
- {
- unsigned long i = 0, avg = 0, min, max;
- min = max = ioc->avg_search[0];
- for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
- avg += ioc->avg_search[i];
- if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
- if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
- }
- avg /= SBA_SEARCH_SAMPLE;
- seq_printf(s, "Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles/IOVA page)\n",
- min, avg, max);
- }
-#endif
-#ifndef ALLOW_IOV_BYPASS
- seq_printf(s, "IOVA bypass disabled\n");
-#endif
- return 0;
-}
-
-static const struct seq_operations ioc_seq_ops = {
- .start = ioc_start,
- .next = ioc_next,
- .stop = ioc_stop,
- .show = ioc_show
-};
-
-static void __init
-ioc_proc_init(void)
-{
- struct proc_dir_entry *dir;
-
- dir = proc_mkdir("bus/mckinley", NULL);
- if (!dir)
- return;
-
- proc_create_seq(ioc_list->name, 0, dir, &ioc_seq_ops);
-}
-#endif
-
-static void
-sba_connect_bus(struct pci_bus *bus)
-{
- acpi_handle handle, parent;
- acpi_status status;
- struct ioc *ioc;
-
- if (!PCI_CONTROLLER(bus))
- panic(PFX "no sysdata on bus %d!\n", bus->number);
-
- if (PCI_CONTROLLER(bus)->iommu)
- return;
-
- handle = acpi_device_handle(PCI_CONTROLLER(bus)->companion);
- if (!handle)
- return;
-
- /*
- * The IOC scope encloses PCI root bridges in the ACPI
- * namespace, so work our way out until we find an IOC we
- * claimed previously.
- */
- do {
- for (ioc = ioc_list; ioc; ioc = ioc->next)
- if (ioc->handle == handle) {
- PCI_CONTROLLER(bus)->iommu = ioc;
- return;
- }
-
- status = acpi_get_parent(handle, &parent);
- handle = parent;
- } while (ACPI_SUCCESS(status));
-
- printk(KERN_WARNING "No IOC for PCI Bus %04x:%02x in ACPI\n", pci_domain_nr(bus), bus->number);
-}
-
-static void __init
-sba_map_ioc_to_node(struct ioc *ioc, acpi_handle handle)
-{
-#ifdef CONFIG_NUMA
- unsigned int node;
-
- node = acpi_get_node(handle);
- if (node != NUMA_NO_NODE && !node_online(node))
- node = NUMA_NO_NODE;
-
- ioc->node = node;
-#endif
-}
-
-static void __init acpi_sba_ioc_add(struct ioc *ioc)
-{
- acpi_handle handle = ioc->handle;
- acpi_status status;
- u64 hpa, length;
- struct acpi_device_info *adi;
-
- ioc_found = ioc->next;
- status = hp_acpi_csr_space(handle, &hpa, &length);
- if (ACPI_FAILURE(status))
- goto err;
-
- status = acpi_get_object_info(handle, &adi);
- if (ACPI_FAILURE(status))
- goto err;
-
- /*
- * For HWP0001, only SBA appears in ACPI namespace. It encloses the PCI
- * root bridges, and its CSR space includes the IOC function.
- */
- if (strncmp("HWP0001", adi->hardware_id.string, 7) == 0) {
- hpa += ZX1_IOC_OFFSET;
- /* zx1 based systems default to kernel page size iommu pages */
- if (!iovp_shift)
- iovp_shift = min(PAGE_SHIFT, 16);
- }
- kfree(adi);
-
- /*
- * default anything not caught above or specified on cmdline to 4k
- * iommu page size
- */
- if (!iovp_shift)
- iovp_shift = 12;
-
- ioc_init(hpa, ioc);
- /* setup NUMA node association */
- sba_map_ioc_to_node(ioc, handle);
- return;
-
- err:
- kfree(ioc);
-}
-
-static const struct acpi_device_id hp_ioc_iommu_device_ids[] = {
- {"HWP0001", 0},
- {"HWP0004", 0},
- {"", 0},
-};
-
-static int acpi_sba_ioc_attach(struct acpi_device *device,
- const struct acpi_device_id *not_used)
-{
- struct ioc *ioc;
-
- ioc = kzalloc(sizeof(*ioc), GFP_KERNEL);
- if (!ioc)
- return -ENOMEM;
-
- ioc->next = ioc_found;
- ioc_found = ioc;
- ioc->handle = device->handle;
- return 1;
-}
-
-
-static struct acpi_scan_handler acpi_sba_ioc_handler = {
- .ids = hp_ioc_iommu_device_ids,
- .attach = acpi_sba_ioc_attach,
-};
-
-static int __init acpi_sba_ioc_init_acpi(void)
-{
- return acpi_scan_add_handler(&acpi_sba_ioc_handler);
-}
-/* This has to run before acpi_scan_init(). */
-arch_initcall(acpi_sba_ioc_init_acpi);
-
-static int sba_dma_supported (struct device *dev, u64 mask)
-{
- /* make sure it's at least 32bit capable */
- return ((mask & 0xFFFFFFFFUL) == 0xFFFFFFFFUL);
-}
-
-static const struct dma_map_ops sba_dma_ops = {
- .alloc = sba_alloc_coherent,
- .free = sba_free_coherent,
- .map_page = sba_map_page,
- .unmap_page = sba_unmap_page,
- .map_sg = sba_map_sg_attrs,
- .unmap_sg = sba_unmap_sg_attrs,
- .dma_supported = sba_dma_supported,
- .mmap = dma_common_mmap,
- .get_sgtable = dma_common_get_sgtable,
- .alloc_pages = dma_common_alloc_pages,
- .free_pages = dma_common_free_pages,
-};
-
-static int __init
-sba_init(void)
-{
- /*
- * If we are booting a kdump kernel, the sba_iommu will cause devices
- * that were not shutdown properly to MCA as soon as they are turned
- * back on. Our only option for a successful kdump kernel boot is to
- * use swiotlb.
- */
- if (is_kdump_kernel())
- return 0;
-
- /*
- * ioc_found should be populated by the acpi_sba_ioc_handler's .attach()
- * routine, but that only happens if acpi_scan_init() has already run.
- */
- while (ioc_found)
- acpi_sba_ioc_add(ioc_found);
-
- if (!ioc_list)
- return 0;
-
- {
- struct pci_bus *b = NULL;
- while ((b = pci_find_next_bus(b)) != NULL)
- sba_connect_bus(b);
- }
-
- /* no need for swiotlb with the iommu */
- swiotlb_exit();
- dma_ops = &sba_dma_ops;
-
-#ifdef CONFIG_PROC_FS
- ioc_proc_init();
-#endif
- return 0;
-}
-
-subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
-
-static int __init
-nosbagart(char *str)
-{
- reserve_sba_gart = 0;
- return 1;
-}
-
-__setup("nosbagart", nosbagart);
-
-static int __init
-sba_page_override(char *str)
-{
- unsigned long page_size;
-
- page_size = memparse(str, &str);
- switch (page_size) {
- case 4096:
- case 8192:
- case 16384:
- case 65536:
- iovp_shift = ffs(page_size) - 1;
- break;
- default:
- printk("%s: unknown/unsupported iommu page size %ld\n",
- __func__, page_size);
- }
-
- return 1;
-}
-
-__setup("sbapagesize=",sba_page_override);