summaryrefslogtreecommitdiffstats
path: root/arch/mips/mti-sead3
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/mti-sead3')
-rw-r--r--arch/mips/mti-sead3/sead3-ehci.c8
-rw-r--r--arch/mips/mti-sead3/sead3-int.c131
-rw-r--r--arch/mips/mti-sead3/sead3-net.c14
-rw-r--r--arch/mips/mti-sead3/sead3-platform.c18
-rw-r--r--arch/mips/mti-sead3/sead3-serial.c45
-rw-r--r--arch/mips/mti-sead3/sead3-time.c35
6 files changed, 49 insertions, 202 deletions
diff --git a/arch/mips/mti-sead3/sead3-ehci.c b/arch/mips/mti-sead3/sead3-ehci.c
index 772fc056a92d..014dd7ba4d68 100644
--- a/arch/mips/mti-sead3/sead3-ehci.c
+++ b/arch/mips/mti-sead3/sead3-ehci.c
@@ -9,6 +9,9 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/irqchip/mips-gic.h>
+
+#include <asm/mips-boards/sead3int.h>
struct resource ehci_resources[] = {
{
@@ -17,7 +20,6 @@ struct resource ehci_resources[] = {
.flags = IORESOURCE_MEM
},
{
- .start = MIPS_CPU_IRQ_BASE + 2,
.flags = IORESOURCE_IRQ
}
};
@@ -37,6 +39,10 @@ static struct platform_device ehci_device = {
static int __init ehci_init(void)
{
+ if (gic_present)
+ ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
+ else
+ ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
return platform_device_register(&ehci_device);
}
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
index 6a560ac03def..e31e17f81eef 100644
--- a/arch/mips/mti-sead3/sead3-int.c
+++ b/arch/mips/mti-sead3/sead3-int.c
@@ -7,9 +7,9 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/io.h>
-#include <asm/gic.h>
#include <asm/irq_cpu.h>
#include <asm/setup.h>
@@ -20,138 +20,23 @@
#define SEAD_CONFIG_BASE 0x1b100110
#define SEAD_CONFIG_SIZE 4
-static unsigned long sead3_config_reg;
-
-/*
- * This table defines the setup for each external GIC interrupt. It is
- * indexed by interrupt number.
- */
-#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
- { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-};
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
- int irq;
-
- irq = (fls(pending) - CAUSEB_IP - 1);
- if (irq >= 0)
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
- else
- spurious_interrupt();
-}
+static void __iomem *sead3_config_reg;
void __init arch_init_irq(void)
{
- int i;
-
- if (!cpu_has_veic) {
+ if (!cpu_has_veic)
mips_cpu_irq_init();
- if (cpu_has_vint) {
- /* install generic handler */
- for (i = 0; i < 8; i++)
- set_vi_handler(i, plat_irq_dispatch);
- }
- }
-
- sead3_config_reg = (unsigned long)ioremap_nocache(SEAD_CONFIG_BASE,
- SEAD_CONFIG_SIZE);
- gic_present = (REG32(sead3_config_reg) & SEAD_CONFIG_GIC_PRESENT_MSK) >>
+ sead3_config_reg = ioremap_nocache(SEAD_CONFIG_BASE, SEAD_CONFIG_SIZE);
+ gic_present = (__raw_readl(sead3_config_reg) &
+ SEAD_CONFIG_GIC_PRESENT_MSK) >>
SEAD_CONFIG_GIC_PRESENT_SHF;
pr_info("GIC: %spresent\n", (gic_present) ? "" : "not ");
pr_info("EIC: %s\n",
(current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
if (gic_present)
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
- ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
-}
-
-void gic_enable_interrupt(int irq_vec)
-{
- unsigned int i, irq_source;
-
- /* enable all the interrupts associated with this vector */
- for (i = 0; i < gic_shared_intr_map[irq_vec].num_shared_intr; i++) {
- irq_source = gic_shared_intr_map[irq_vec].intr_list[i];
- GIC_SET_INTR_MASK(irq_source);
- }
- /* enable all local interrupts associated with this vector */
- if (gic_shared_intr_map[irq_vec].local_intr_mask) {
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_SMASK),
- gic_shared_intr_map[irq_vec].local_intr_mask);
- }
+ gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC,
+ MIPS_GIC_IRQ_BASE);
}
-void gic_disable_interrupt(int irq_vec)
-{
- unsigned int i, irq_source;
-
- /* disable all the interrupts associated with this vector */
- for (i = 0; i < gic_shared_intr_map[irq_vec].num_shared_intr; i++) {
- irq_source = gic_shared_intr_map[irq_vec].intr_list[i];
- GIC_CLR_INTR_MASK(irq_source);
- }
- /* disable all local interrupts associated with this vector */
- if (gic_shared_intr_map[irq_vec].local_intr_mask) {
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_RMASK),
- gic_shared_intr_map[irq_vec].local_intr_mask);
- }
-}
-
-void gic_irq_ack(struct irq_data *d)
-{
- GIC_CLR_INTR_MASK(d->irq - gic_irq_base);
-}
-
-void gic_finish_irq(struct irq_data *d)
-{
- unsigned int irq = (d->irq - gic_irq_base);
- unsigned int i, irq_source;
-
- /* Clear edge detectors. */
- for (i = 0; i < gic_shared_intr_map[irq].num_shared_intr; i++) {
- irq_source = gic_shared_intr_map[irq].intr_list[i];
- if (gic_irq_flags[irq_source] & GIC_TRIG_EDGE)
- GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq_source);
- }
-
- /* Enable interrupts. */
- GIC_SET_INTR_MASK(irq);
-}
-
-void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
-{
- int i;
-
- /*
- * For non-EIC mode, we want to setup the GIC in pass-through
- * mode, as if the GIC didn't exist. Do not map any interrupts
- * for an external interrupt controller.
- */
- if (!cpu_has_veic)
- return;
-
- for (i = gic_irq_base; i < (gic_irq_base + irqs); i++)
- irq_set_chip_and_handler(i, irq_controller, handle_percpu_irq);
-}
diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c
index dd11e7eb771c..46176b804576 100644
--- a/arch/mips/mti-sead3/sead3-net.c
+++ b/arch/mips/mti-sead3/sead3-net.c
@@ -7,9 +7,12 @@
*/
#include <linux/module.h>
#include <linux/irq.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
+#include <asm/mips-boards/sead3int.h>
+
static struct smsc911x_platform_config sead3_smsc911x_data = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
@@ -17,14 +20,13 @@ static struct smsc911x_platform_config sead3_smsc911x_data = {
.phy_interface = PHY_INTERFACE_MODE_MII,
};
-struct resource sead3_net_resourcess[] = {
+struct resource sead3_net_resources[] = {
{
.start = 0x1f010000,
.end = 0x1f01ffff,
.flags = IORESOURCE_MEM
},
{
- .start = MIPS_CPU_IRQ_BASE + 6,
.flags = IORESOURCE_IRQ
}
};
@@ -35,12 +37,16 @@ static struct platform_device sead3_net_device = {
.dev = {
.platform_data = &sead3_smsc911x_data,
},
- .num_resources = ARRAY_SIZE(sead3_net_resourcess),
- .resource = sead3_net_resourcess
+ .num_resources = ARRAY_SIZE(sead3_net_resources),
+ .resource = sead3_net_resources
};
static int __init sead3_net_init(void)
{
+ if (gic_present)
+ sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
+ else
+ sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
return platform_device_register(&sead3_net_device);
}
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
index 6c3b33dbed18..53ee6f1f018d 100644
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ b/arch/mips/mti-sead3/sead3-platform.c
@@ -7,12 +7,15 @@
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/serial_8250.h>
-#define UART(base, int) \
+#include <asm/mips-boards/sead3int.h>
+
+#define UART(base) \
{ \
.mapbase = base, \
- .irq = int, \
+ .irq = -1, \
.uartclk = 14745600, \
.iotype = UPIO_MEM32, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
@@ -20,8 +23,8 @@
}
static struct plat_serial8250_port uart8250_data[] = {
- UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */
- UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */
+ UART(0x1f000900), /* ttyS0 = USB */
+ UART(0x1f000800), /* ttyS1 = RS232 */
{ },
};
@@ -35,6 +38,13 @@ static struct platform_device uart8250_device = {
static int __init uart8250_init(void)
{
+ if (gic_present) {
+ uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
+ uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
+ } else {
+ uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
+ uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
+ }
return platform_device_register(&uart8250_device);
}
diff --git a/arch/mips/mti-sead3/sead3-serial.c b/arch/mips/mti-sead3/sead3-serial.c
deleted file mode 100644
index bc52705bbee4..000000000000
--- a/arch/mips/mti-sead3/sead3-serial.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define UART(base, int) \
-{ \
- .mapbase = base, \
- .irq = int, \
- .uartclk = 14745600, \
- .iotype = UPIO_MEM32, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
- .regshift = 2, \
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
- UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */
- UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */
- { },
-};
-
-static struct platform_device uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart8250_data,
- },
-};
-
-static int __init uart8250_init(void)
-{
- return platform_device_register(&uart8250_device);
-}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the SEAD-3 platform");
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
index 678d03d53c60..ec1dd2491f96 100644
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -6,6 +6,7 @@
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
#include <asm/cpu.h>
#include <asm/setup.h>
@@ -13,19 +14,6 @@
#include <asm/irq.h>
#include <asm/mips-boards/generic.h>
-static int mips_cpu_timer_irq;
-static int mips_cpu_perf_irq;
-
-static void mips_timer_dispatch(void)
-{
- do_IRQ(mips_cpu_timer_irq);
-}
-
-static void mips_perf_dispatch(void)
-{
- do_IRQ(mips_cpu_perf_irq);
-}
-
static void __iomem *status_reg = (void __iomem *)0xbf000410;
/*
@@ -81,21 +69,20 @@ void read_persistent_clock(struct timespec *ts)
ts->tv_nsec = 0;
}
-static void __init plat_perf_setup(void)
+int get_c0_perfcount_int(void)
{
- if (cp0_perfcount_irq >= 0) {
- if (cpu_has_vint)
- set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
- mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- }
+ if (gic_present)
+ return gic_get_c0_compare_int();
+ if (cp0_perfcount_irq >= 0)
+ return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ return -1;
}
unsigned int get_c0_compare_int(void)
{
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
- mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
- return mips_cpu_timer_irq;
+ if (gic_present)
+ return gic_get_c0_compare_int();
+ return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
void __init plat_time_init(void)
@@ -108,6 +95,4 @@ void __init plat_time_init(void)
(est_freq % 1000000) * 100 / 1000000);
mips_scroll_message();
-
- plat_perf_setup();
}