diff options
Diffstat (limited to 'drivers/cxl')
-rw-r--r-- | drivers/cxl/Kconfig | 1 | ||||
-rw-r--r-- | drivers/cxl/core/memdev.c | 308 | ||||
-rw-r--r-- | drivers/cxl/cxlmem.h | 82 | ||||
-rw-r--r-- | drivers/cxl/pci.c | 4 |
4 files changed, 395 insertions, 0 deletions
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig index ff4e78117b31..80d8e35fa049 100644 --- a/drivers/cxl/Kconfig +++ b/drivers/cxl/Kconfig @@ -82,6 +82,7 @@ config CXL_PMEM config CXL_MEM tristate "CXL: Memory Expansion" depends on CXL_PCI + select FW_UPLOAD default CXL_BUS help The CXL.mem protocol allows a device to act as a provider of "System diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c index ed8de7efddef..fd2e6b0f79c0 100644 --- a/drivers/cxl/core/memdev.c +++ b/drivers/cxl/core/memdev.c @@ -2,6 +2,7 @@ /* Copyright(c) 2020 Intel Corporation. */ #include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/firmware.h> #include <linux/device.h> #include <linux/slab.h> #include <linux/idr.h> @@ -648,6 +649,313 @@ static int cxl_memdev_release_file(struct inode *inode, struct file *file) return 0; } +/** + * cxl_mem_get_fw_info - Get Firmware info + * @cxlds: The device data for the operation + * + * Retrieve firmware info for the device specified. + * + * Return: 0 if no error: or the result of the mailbox command. + * + * See CXL-3.0 8.2.9.3.1 Get FW Info + */ +static int cxl_mem_get_fw_info(struct cxl_dev_state *cxlds) +{ + struct cxl_mbox_get_fw_info info; + struct cxl_mbox_cmd mbox_cmd; + int rc; + + mbox_cmd = (struct cxl_mbox_cmd) { + .opcode = CXL_MBOX_OP_GET_FW_INFO, + .size_out = sizeof(info), + .payload_out = &info, + }; + + rc = cxl_internal_send_cmd(cxlds, &mbox_cmd); + if (rc < 0) + return rc; + + cxlds->fw.num_slots = info.num_slots; + cxlds->fw.cur_slot = FIELD_GET(CXL_FW_INFO_SLOT_INFO_CUR_MASK, + info.slot_info); + + return 0; +} + +/** + * cxl_mem_activate_fw - Activate Firmware + * @cxlds: The device data for the operation + * @slot: slot number to activate + * + * Activate firmware in a given slot for the device specified. + * + * Return: 0 if no error: or the result of the mailbox command. + * + * See CXL-3.0 8.2.9.3.3 Activate FW + */ +static int cxl_mem_activate_fw(struct cxl_dev_state *cxlds, int slot) +{ + struct cxl_mbox_activate_fw activate; + struct cxl_mbox_cmd mbox_cmd; + + if (slot == 0 || slot > cxlds->fw.num_slots) + return -EINVAL; + + mbox_cmd = (struct cxl_mbox_cmd) { + .opcode = CXL_MBOX_OP_ACTIVATE_FW, + .size_in = sizeof(activate), + .payload_in = &activate, + }; + + /* Only offline activation supported for now */ + activate.action = CXL_FW_ACTIVATE_OFFLINE; + activate.slot = slot; + + return cxl_internal_send_cmd(cxlds, &mbox_cmd); +} + +/** + * cxl_mem_abort_fw_xfer - Abort an in-progress FW transfer + * @cxlds: The device data for the operation + * + * Abort an in-progress firmware transfer for the device specified. + * + * Return: 0 if no error: or the result of the mailbox command. + * + * See CXL-3.0 8.2.9.3.2 Transfer FW + */ +static int cxl_mem_abort_fw_xfer(struct cxl_dev_state *cxlds) +{ + struct cxl_mbox_transfer_fw *transfer; + struct cxl_mbox_cmd mbox_cmd; + int rc; + + transfer = kzalloc(struct_size(transfer, data, 0), GFP_KERNEL); + if (!transfer) + return -ENOMEM; + + /* Set a 1s poll interval and a total wait time of 30s */ + mbox_cmd = (struct cxl_mbox_cmd) { + .opcode = CXL_MBOX_OP_TRANSFER_FW, + .size_in = sizeof(*transfer), + .payload_in = transfer, + .poll_interval_ms = 1000, + .poll_count = 30, + }; + + transfer->action = CXL_FW_TRANSFER_ACTION_ABORT; + + rc = cxl_internal_send_cmd(cxlds, &mbox_cmd); + kfree(transfer); + return rc; +} + +static void cxl_fw_cleanup(struct fw_upload *fwl) +{ + struct cxl_dev_state *cxlds = fwl->dd_handle; + + cxlds->fw.next_slot = 0; +} + +static int cxl_fw_do_cancel(struct fw_upload *fwl) +{ + struct cxl_dev_state *cxlds = fwl->dd_handle; + struct cxl_memdev *cxlmd = cxlds->cxlmd; + int rc; + + rc = cxl_mem_abort_fw_xfer(cxlds); + if (rc < 0) + dev_err(&cxlmd->dev, "Error aborting FW transfer: %d\n", rc); + + return FW_UPLOAD_ERR_CANCELED; +} + +static enum fw_upload_err cxl_fw_prepare(struct fw_upload *fwl, const u8 *data, + u32 size) +{ + struct cxl_dev_state *cxlds = fwl->dd_handle; + struct cxl_mbox_transfer_fw *transfer; + + if (!size) + return FW_UPLOAD_ERR_INVALID_SIZE; + + cxlds->fw.oneshot = struct_size(transfer, data, size) < + cxlds->payload_size; + + if (cxl_mem_get_fw_info(cxlds)) + return FW_UPLOAD_ERR_HW_ERROR; + + /* + * So far no state has been changed, hence no other cleanup is + * necessary. Simply return the cancelled status. + */ + if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state)) + return FW_UPLOAD_ERR_CANCELED; + + return FW_UPLOAD_ERR_NONE; +} + +static enum fw_upload_err cxl_fw_write(struct fw_upload *fwl, const u8 *data, + u32 offset, u32 size, u32 *written) +{ + struct cxl_dev_state *cxlds = fwl->dd_handle; + struct cxl_memdev *cxlmd = cxlds->cxlmd; + struct cxl_mbox_transfer_fw *transfer; + struct cxl_mbox_cmd mbox_cmd; + u32 cur_size, remaining; + size_t size_in; + int rc; + + *written = 0; + + /* Offset has to be aligned to 128B (CXL-3.0 8.2.9.3.2 Table 8-57) */ + if (!IS_ALIGNED(offset, CXL_FW_TRANSFER_ALIGNMENT)) { + dev_err(&cxlmd->dev, + "misaligned offset for FW transfer slice (%u)\n", + offset); + return FW_UPLOAD_ERR_RW_ERROR; + } + + /* + * Pick transfer size based on cxlds->payload_size + * @size must bw 128-byte aligned, ->payload_size is a power of 2 + * starting at 256 bytes, and sizeof(*transfer) is 128. + * These constraints imply that @cur_size will always be 128b aligned. + */ + cur_size = min_t(size_t, size, cxlds->payload_size - sizeof(*transfer)); + + remaining = size - cur_size; + size_in = struct_size(transfer, data, cur_size); + + if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state)) + return cxl_fw_do_cancel(fwl); + + /* + * Slot numbers are 1-indexed + * cur_slot is the 0-indexed next_slot (i.e. 'cur_slot - 1 + 1') + * Check for rollover using modulo, and 1-index it by adding 1 + */ + cxlds->fw.next_slot = (cxlds->fw.cur_slot % cxlds->fw.num_slots) + 1; + + /* Do the transfer via mailbox cmd */ + transfer = kzalloc(size_in, GFP_KERNEL); + if (!transfer) + return FW_UPLOAD_ERR_RW_ERROR; + + transfer->offset = cpu_to_le32(offset / CXL_FW_TRANSFER_ALIGNMENT); + memcpy(transfer->data, data + offset, cur_size); + if (cxlds->fw.oneshot) { + transfer->action = CXL_FW_TRANSFER_ACTION_FULL; + transfer->slot = cxlds->fw.next_slot; + } else { + if (offset == 0) { + transfer->action = CXL_FW_TRANSFER_ACTION_INITIATE; + } else if (remaining == 0) { + transfer->action = CXL_FW_TRANSFER_ACTION_END; + transfer->slot = cxlds->fw.next_slot; + } else { + transfer->action = CXL_FW_TRANSFER_ACTION_CONTINUE; + } + } + + mbox_cmd = (struct cxl_mbox_cmd) { + .opcode = CXL_MBOX_OP_TRANSFER_FW, + .size_in = size_in, + .payload_in = transfer, + .poll_interval_ms = 1000, + .poll_count = 30, + }; + + rc = cxl_internal_send_cmd(cxlds, &mbox_cmd); + if (rc < 0) { + rc = FW_UPLOAD_ERR_RW_ERROR; + goto out_free; + } + + *written = cur_size; + + /* Activate FW if oneshot or if the last slice was written */ + if (cxlds->fw.oneshot || remaining == 0) { + dev_dbg(&cxlmd->dev, "Activating firmware slot: %d\n", + cxlds->fw.next_slot); + rc = cxl_mem_activate_fw(cxlds, cxlds->fw.next_slot); + if (rc < 0) { + dev_err(&cxlmd->dev, "Error activating firmware: %d\n", + rc); + rc = FW_UPLOAD_ERR_HW_ERROR; + goto out_free; + } + } + + rc = FW_UPLOAD_ERR_NONE; + +out_free: + kfree(transfer); + return rc; +} + +static enum fw_upload_err cxl_fw_poll_complete(struct fw_upload *fwl) +{ + struct cxl_dev_state *cxlds = fwl->dd_handle; + + /* + * cxl_internal_send_cmd() handles background operations synchronously. + * No need to wait for completions here - any errors would've been + * reported and handled during the ->write() call(s). + * Just check if a cancel request was received, and return success. + */ + if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state)) + return cxl_fw_do_cancel(fwl); + + return FW_UPLOAD_ERR_NONE; +} + +static void cxl_fw_cancel(struct fw_upload *fwl) +{ + struct cxl_dev_state *cxlds = fwl->dd_handle; + + set_bit(CXL_FW_CANCEL, cxlds->fw.state); +} + +static const struct fw_upload_ops cxl_memdev_fw_ops = { + .prepare = cxl_fw_prepare, + .write = cxl_fw_write, + .poll_complete = cxl_fw_poll_complete, + .cancel = cxl_fw_cancel, + .cleanup = cxl_fw_cleanup, +}; + +static void devm_cxl_remove_fw_upload(void *fwl) +{ + firmware_upload_unregister(fwl); +} + +int cxl_memdev_setup_fw_upload(struct cxl_dev_state *cxlds) +{ + struct device *dev = &cxlds->cxlmd->dev; + struct fw_upload *fwl; + int rc; + + if (!test_bit(CXL_MEM_COMMAND_ID_GET_FW_INFO, cxlds->enabled_cmds)) + return 0; + + fwl = firmware_upload_register(THIS_MODULE, dev, dev_name(dev), + &cxl_memdev_fw_ops, cxlds); + if (IS_ERR(fwl)) + return dev_err_probe(dev, PTR_ERR(fwl), + "Failed to register firmware loader\n"); + + rc = devm_add_action_or_reset(cxlds->dev, devm_cxl_remove_fw_upload, + fwl); + if (rc) + dev_err(dev, + "Failed to add firmware loader remove action: %d\n", + rc); + + return rc; +} +EXPORT_SYMBOL_NS_GPL(cxl_memdev_setup_fw_upload, CXL); + static const struct file_operations cxl_memdev_fops = { .owner = THIS_MODULE, .unlocked_ioctl = cxl_memdev_ioctl, diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h index 78ff518012bf..ce6f085e5ba8 100644 --- a/drivers/cxl/cxlmem.h +++ b/drivers/cxl/cxlmem.h @@ -83,6 +83,7 @@ static inline bool is_cxl_endpoint(struct cxl_port *port) } struct cxl_memdev *devm_cxl_add_memdev(struct cxl_dev_state *cxlds); +int cxl_memdev_setup_fw_upload(struct cxl_dev_state *cxlds); int devm_cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled, resource_size_t base, resource_size_t len, resource_size_t skipped); @@ -260,6 +261,84 @@ struct cxl_poison_state { struct mutex lock; /* Protect reads of poison list */ }; +/* + * Get FW Info + * CXL rev 3.0 section 8.2.9.3.1; Table 8-56 + */ +struct cxl_mbox_get_fw_info { + u8 num_slots; + u8 slot_info; + u8 activation_cap; + u8 reserved[13]; + char slot_1_revision[16]; + char slot_2_revision[16]; + char slot_3_revision[16]; + char slot_4_revision[16]; +} __packed; + +#define CXL_FW_INFO_SLOT_INFO_CUR_MASK GENMASK(2, 0) +#define CXL_FW_INFO_SLOT_INFO_NEXT_MASK GENMASK(5, 3) +#define CXL_FW_INFO_SLOT_INFO_NEXT_SHIFT 3 +#define CXL_FW_INFO_ACTIVATION_CAP_HAS_LIVE_ACTIVATE BIT(0) + +/* + * Transfer FW Input Payload + * CXL rev 3.0 section 8.2.9.3.2; Table 8-57 + */ +struct cxl_mbox_transfer_fw { + u8 action; + u8 slot; + u8 reserved[2]; + __le32 offset; + u8 reserved2[0x78]; + u8 data[]; +} __packed; + +#define CXL_FW_TRANSFER_ACTION_FULL 0x0 +#define CXL_FW_TRANSFER_ACTION_INITIATE 0x1 +#define CXL_FW_TRANSFER_ACTION_CONTINUE 0x2 +#define CXL_FW_TRANSFER_ACTION_END 0x3 +#define CXL_FW_TRANSFER_ACTION_ABORT 0x4 + +/* + * CXL rev 3.0 section 8.2.9.3.2 mandates 128-byte alignment for FW packages + * and for each part transferred in a Transfer FW command. + */ +#define CXL_FW_TRANSFER_ALIGNMENT 128 + +/* + * Activate FW Input Payload + * CXL rev 3.0 section 8.2.9.3.3; Table 8-58 + */ +struct cxl_mbox_activate_fw { + u8 action; + u8 slot; +} __packed; + +#define CXL_FW_ACTIVATE_ONLINE 0x0 +#define CXL_FW_ACTIVATE_OFFLINE 0x1 + +/* FW state bits */ +#define CXL_FW_STATE_BITS 32 +#define CXL_FW_CANCEL BIT(0) + +/** + * struct cxl_fw_state - Firmware upload / activation state + * + * @state: fw_uploader state bitmask + * @oneshot: whether the fw upload fits in a single transfer + * @num_slots: Number of FW slots available + * @cur_slot: Slot number currently active + * @next_slot: Slot number for the new firmware + */ +struct cxl_fw_state { + DECLARE_BITMAP(state, CXL_FW_STATE_BITS); + bool oneshot; + int num_slots; + int cur_slot; + int next_slot; +}; + /** * struct cxl_security_state - Device security state * @@ -314,6 +393,7 @@ struct cxl_security_state { * @serial: PCIe Device Serial Number * @event: event log driver state * @poison: poison driver state info + * @fw: firmware upload / activation state * @mbox_send: @dev specific transport for transmitting mailbox commands * * See section 8.2.9.5.2 Capacity Configuration and Label Storage for @@ -354,6 +434,7 @@ struct cxl_dev_state { struct cxl_event_state event; struct cxl_poison_state poison; struct cxl_security_state security; + struct cxl_fw_state fw; struct rcuwait mbox_wait; int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd); @@ -367,6 +448,7 @@ enum cxl_opcode { CXL_MBOX_OP_GET_EVT_INT_POLICY = 0x0102, CXL_MBOX_OP_SET_EVT_INT_POLICY = 0x0103, CXL_MBOX_OP_GET_FW_INFO = 0x0200, + CXL_MBOX_OP_TRANSFER_FW = 0x0201, CXL_MBOX_OP_ACTIVATE_FW = 0x0202, CXL_MBOX_OP_SET_TIMESTAMP = 0x0301, CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400, diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index 8bc19cae0850..4468f53ba5a8 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -921,6 +921,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (IS_ERR(cxlmd)) return PTR_ERR(cxlmd); + rc = cxl_memdev_setup_fw_upload(cxlds); + if (rc) + return rc; + rc = cxl_event_config(host_bridge, cxlds); if (rc) return rc; |