diff options
Diffstat (limited to 'drivers/firmware')
60 files changed, 3028 insertions, 933 deletions
diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 7ba98c7af2e9..b14cbdae94e8 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -26,6 +26,7 @@ #include <linux/arm_ffa.h> #include <linux/bitfield.h> #include <linux/cpuhotplug.h> +#include <linux/delay.h> #include <linux/device.h> #include <linux/hashtable.h> #include <linux/interrupt.h> @@ -53,11 +54,8 @@ #define PACK_TARGET_INFO(s, r) \ (FIELD_PREP(SENDER_ID_MASK, (s)) | FIELD_PREP(RECEIVER_ID_MASK, (r))) -/* - * Keeping RX TX buffer size as 4K for now - * 64K may be preferred to keep it min a page in 64K PAGE_SIZE config - */ -#define RXTX_BUFFER_SIZE SZ_4K +#define RXTX_MAP_MIN_BUFSZ_MASK GENMASK(1, 0) +#define RXTX_MAP_MIN_BUFSZ(x) ((x) & RXTX_MAP_MIN_BUFSZ_MASK) #define FFA_MAX_NOTIFICATIONS 64 @@ -75,6 +73,7 @@ static const int ffa_linux_errmap[] = { -EAGAIN, /* FFA_RET_RETRY */ -ECANCELED, /* FFA_RET_ABORTED */ -ENODATA, /* FFA_RET_NO_DATA */ + -EAGAIN, /* FFA_RET_NOT_READY */ }; static inline int ffa_to_linux_errno(int errno) @@ -97,7 +96,9 @@ struct ffa_drv_info { struct mutex tx_lock; /* lock to protect Tx buffer */ void *rx_buffer; void *tx_buffer; + size_t rxtx_bufsz; bool mem_ops_native; + bool msg_direct_req2_supp; bool bitmap_created; bool notif_enabled; unsigned int sched_recv_irq; @@ -211,6 +212,32 @@ static int ffa_rxtx_unmap(u16 vm_id) return 0; } +static int ffa_features(u32 func_feat_id, u32 input_props, + u32 *if_props_1, u32 *if_props_2) +{ + ffa_value_t id; + + if (!ARM_SMCCC_IS_FAST_CALL(func_feat_id) && input_props) { + pr_err("%s: Invalid Parameters: %x, %x", __func__, + func_feat_id, input_props); + return ffa_to_linux_errno(FFA_RET_INVALID_PARAMETERS); + } + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_FEATURES, .a1 = func_feat_id, .a2 = input_props, + }, &id); + + if (id.a0 == FFA_ERROR) + return ffa_to_linux_errno((int)id.a2); + + if (if_props_1) + *if_props_1 = id.a2; + if (if_props_2) + *if_props_2 = id.a3; + + return 0; +} + #define PARTITION_INFO_GET_RETURN_COUNT_ONLY BIT(0) /* buffer must be sizeof(struct ffa_partition_info) * num_partitions */ @@ -260,17 +287,75 @@ __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3, return count; } +#define LAST_INDEX_MASK GENMASK(15, 0) +#define CURRENT_INDEX_MASK GENMASK(31, 16) +#define UUID_INFO_TAG_MASK GENMASK(47, 32) +#define PARTITION_INFO_SZ_MASK GENMASK(63, 48) +#define PARTITION_COUNT(x) ((u16)(FIELD_GET(LAST_INDEX_MASK, (x))) + 1) +#define CURRENT_INDEX(x) ((u16)(FIELD_GET(CURRENT_INDEX_MASK, (x)))) +#define UUID_INFO_TAG(x) ((u16)(FIELD_GET(UUID_INFO_TAG_MASK, (x)))) +#define PARTITION_INFO_SZ(x) ((u16)(FIELD_GET(PARTITION_INFO_SZ_MASK, (x)))) +static int +__ffa_partition_info_get_regs(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3, + struct ffa_partition_info *buffer, int num_parts) +{ + u16 buf_sz, start_idx, cur_idx, count = 0, prev_idx = 0, tag = 0; + ffa_value_t partition_info; + + do { + start_idx = prev_idx ? prev_idx + 1 : 0; + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_PARTITION_INFO_GET_REGS, + .a1 = (u64)uuid1 << 32 | uuid0, + .a2 = (u64)uuid3 << 32 | uuid2, + .a3 = start_idx | tag << 16, + }, &partition_info); + + if (partition_info.a0 == FFA_ERROR) + return ffa_to_linux_errno((int)partition_info.a2); + + if (!count) + count = PARTITION_COUNT(partition_info.a2); + if (!buffer || !num_parts) /* count only */ + return count; + + cur_idx = CURRENT_INDEX(partition_info.a2); + tag = UUID_INFO_TAG(partition_info.a2); + buf_sz = PARTITION_INFO_SZ(partition_info.a2); + if (buf_sz > sizeof(*buffer)) + buf_sz = sizeof(*buffer); + + memcpy(buffer + prev_idx * buf_sz, &partition_info.a3, + (cur_idx - start_idx + 1) * buf_sz); + prev_idx = cur_idx; + + } while (cur_idx < (count - 1)); + + return count; +} + /* buffer is allocated and caller must free the same if returned count > 0 */ static int ffa_partition_probe(const uuid_t *uuid, struct ffa_partition_info **buffer) { int count; u32 uuid0_4[4]; + bool reg_mode = false; struct ffa_partition_info *pbuf; + if (!ffa_features(FFA_PARTITION_INFO_GET_REGS, 0, NULL, NULL)) + reg_mode = true; + export_uuid((u8 *)uuid0_4, uuid); - count = __ffa_partition_info_get(uuid0_4[0], uuid0_4[1], uuid0_4[2], - uuid0_4[3], NULL, 0); + if (reg_mode) + count = __ffa_partition_info_get_regs(uuid0_4[0], uuid0_4[1], + uuid0_4[2], uuid0_4[3], + NULL, 0); + else + count = __ffa_partition_info_get(uuid0_4[0], uuid0_4[1], + uuid0_4[2], uuid0_4[3], + NULL, 0); if (count <= 0) return count; @@ -278,8 +363,14 @@ ffa_partition_probe(const uuid_t *uuid, struct ffa_partition_info **buffer) if (!pbuf) return -ENOMEM; - count = __ffa_partition_info_get(uuid0_4[0], uuid0_4[1], uuid0_4[2], - uuid0_4[3], pbuf, count); + if (reg_mode) + count = __ffa_partition_info_get_regs(uuid0_4[0], uuid0_4[1], + uuid0_4[2], uuid0_4[3], + pbuf, count); + else + count = __ffa_partition_info_get(uuid0_4[0], uuid0_4[1], + uuid0_4[2], uuid0_4[3], + pbuf, count); if (count <= 0) kfree(pbuf); else @@ -305,6 +396,18 @@ static int ffa_id_get(u16 *vm_id) return 0; } +static inline void ffa_msg_send_wait_for_completion(ffa_value_t *ret) +{ + while (ret->a0 == FFA_INTERRUPT || ret->a0 == FFA_YIELD) { + if (ret->a0 == FFA_YIELD) + fsleep(1000); + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_RUN, .a1 = ret->a1, + }, ret); + } +} + static int ffa_msg_send_direct_req(u16 src_id, u16 dst_id, bool mode_32bit, struct ffa_send_direct_data *data) { @@ -325,10 +428,7 @@ static int ffa_msg_send_direct_req(u16 src_id, u16 dst_id, bool mode_32bit, .a6 = data->data3, .a7 = data->data4, }, &ret); - while (ret.a0 == FFA_INTERRUPT) - invoke_ffa_fn((ffa_value_t){ - .a0 = FFA_RUN, .a1 = ret.a1, - }, &ret); + ffa_msg_send_wait_for_completion(&ret); if (ret.a0 == FFA_ERROR) return ffa_to_linux_errno((int)ret.a2); @@ -352,7 +452,7 @@ static int ffa_msg_send2(u16 src_id, u16 dst_id, void *buf, size_t sz) ffa_value_t ret; int retval = 0; - if (sz > (RXTX_BUFFER_SIZE - sizeof(*msg))) + if (sz > (drv_info->rxtx_bufsz - sizeof(*msg))) return -ERANGE; mutex_lock(&drv_info->tx_lock); @@ -377,6 +477,37 @@ static int ffa_msg_send2(u16 src_id, u16 dst_id, void *buf, size_t sz) return retval; } +static int ffa_msg_send_direct_req2(u16 src_id, u16 dst_id, const uuid_t *uuid, + struct ffa_send_direct_data2 *data) +{ + u32 src_dst_ids = PACK_TARGET_INFO(src_id, dst_id); + union { + uuid_t uuid; + __le64 regs[2]; + } uuid_regs = { .uuid = *uuid }; + ffa_value_t ret, args = { + .a0 = FFA_MSG_SEND_DIRECT_REQ2, + .a1 = src_dst_ids, + .a2 = le64_to_cpu(uuid_regs.regs[0]), + .a3 = le64_to_cpu(uuid_regs.regs[1]), + }; + memcpy((void *)&args + offsetof(ffa_value_t, a4), data, sizeof(*data)); + + invoke_ffa_fn(args, &ret); + + ffa_msg_send_wait_for_completion(&ret); + + if (ret.a0 == FFA_ERROR) + return ffa_to_linux_errno((int)ret.a2); + + if (ret.a0 == FFA_MSG_SEND_DIRECT_RESP2) { + memcpy(data, (void *)&ret + offsetof(ffa_value_t, a4), sizeof(*data)); + return 0; + } + + return -EINVAL; +} + static int ffa_mem_first_frag(u32 func_id, phys_addr_t buf, u32 buf_sz, u32 frag_len, u32 len, u64 *handle) { @@ -561,9 +692,10 @@ static int ffa_memory_ops(u32 func_id, struct ffa_mem_ops_args *args) { int ret; void *buffer; + size_t rxtx_bufsz = drv_info->rxtx_bufsz; if (!args->use_txbuf) { - buffer = alloc_pages_exact(RXTX_BUFFER_SIZE, GFP_KERNEL); + buffer = alloc_pages_exact(rxtx_bufsz, GFP_KERNEL); if (!buffer) return -ENOMEM; } else { @@ -571,12 +703,12 @@ static int ffa_memory_ops(u32 func_id, struct ffa_mem_ops_args *args) mutex_lock(&drv_info->tx_lock); } - ret = ffa_setup_and_transmit(func_id, buffer, RXTX_BUFFER_SIZE, args); + ret = ffa_setup_and_transmit(func_id, buffer, rxtx_bufsz, args); if (args->use_txbuf) mutex_unlock(&drv_info->tx_lock); else - free_pages_exact(buffer, RXTX_BUFFER_SIZE); + free_pages_exact(buffer, rxtx_bufsz); return ret < 0 ? ret : 0; } @@ -597,32 +729,6 @@ static int ffa_memory_reclaim(u64 g_handle, u32 flags) return 0; } -static int ffa_features(u32 func_feat_id, u32 input_props, - u32 *if_props_1, u32 *if_props_2) -{ - ffa_value_t id; - - if (!ARM_SMCCC_IS_FAST_CALL(func_feat_id) && input_props) { - pr_err("%s: Invalid Parameters: %x, %x", __func__, - func_feat_id, input_props); - return ffa_to_linux_errno(FFA_RET_INVALID_PARAMETERS); - } - - invoke_ffa_fn((ffa_value_t){ - .a0 = FFA_FEATURES, .a1 = func_feat_id, .a2 = input_props, - }, &id); - - if (id.a0 == FFA_ERROR) - return ffa_to_linux_errno((int)id.a2); - - if (if_props_1) - *if_props_1 = id.a2; - if (if_props_2) - *if_props_2 = id.a3; - - return 0; -} - static int ffa_notification_bitmap_create(void) { ffa_value_t ret; @@ -858,11 +964,15 @@ static int ffa_run(struct ffa_device *dev, u16 vcpu) return 0; } -static void ffa_set_up_mem_ops_native_flag(void) +static void ffa_drvinfo_flags_init(void) { if (!ffa_features(FFA_FN_NATIVE(MEM_LEND), 0, NULL, NULL) || !ffa_features(FFA_FN_NATIVE(MEM_SHARE), 0, NULL, NULL)) drv_info->mem_ops_native = true; + + if (!ffa_features(FFA_MSG_SEND_DIRECT_REQ2, 0, NULL, NULL) || + !ffa_features(FFA_MSG_SEND_DIRECT_RESP2, 0, NULL, NULL)) + drv_info->msg_direct_req2_supp = true; } static u32 ffa_api_version_get(void) @@ -908,6 +1018,16 @@ static int ffa_indirect_msg_send(struct ffa_device *dev, void *buf, size_t sz) return ffa_msg_send2(drv_info->vm_id, dev->vm_id, buf, sz); } +static int ffa_sync_send_receive2(struct ffa_device *dev, const uuid_t *uuid, + struct ffa_send_direct_data2 *data) +{ + if (!drv_info->msg_direct_req2_supp) + return -EOPNOTSUPP; + + return ffa_msg_send_direct_req2(drv_info->vm_id, dev->vm_id, + uuid, data); +} + static int ffa_memory_share(struct ffa_mem_ops_args *args) { if (drv_info->mem_ops_native) @@ -1191,6 +1311,7 @@ static const struct ffa_msg_ops ffa_drv_msg_ops = { .mode_32bit_set = ffa_mode_32bit_set, .sync_send_receive = ffa_sync_send_receive, .indirect_send = ffa_indirect_msg_send, + .sync_send_receive2 = ffa_sync_send_receive2, }; static const struct ffa_mem_ops ffa_drv_mem_ops = { @@ -1242,7 +1363,7 @@ ffa_bus_notifier(struct notifier_block *nb, unsigned long action, void *data) if (action == BUS_NOTIFY_BIND_DRIVER) { struct ffa_driver *ffa_drv = to_ffa_driver(dev->driver); - const struct ffa_device_id *id_table= ffa_drv->id_table; + const struct ffa_device_id *id_table = ffa_drv->id_table; /* * FF-A v1.1 provides UUID for each partition as part of the @@ -1327,8 +1448,6 @@ static int ffa_setup_partitions(void) /* Allocate for the host */ info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) { - pr_err("%s: failed to alloc Host partition ID 0x%x. Abort.\n", - __func__, drv_info->vm_id); /* Already registered devices are freed on bus_exit */ ffa_partitions_cleanup(); return -ENOMEM; @@ -1603,15 +1722,16 @@ cleanup: static int __init ffa_init(void) { int ret; + u32 buf_sz; + size_t rxtx_bufsz = SZ_4K; ret = ffa_transport_init(&invoke_ffa_fn); if (ret) return ret; drv_info = kzalloc(sizeof(*drv_info), GFP_KERNEL); - if (!drv_info) { + if (!drv_info) return -ENOMEM; - } ret = ffa_version_check(&drv_info->version); if (ret) @@ -1623,13 +1743,24 @@ static int __init ffa_init(void) goto free_drv_info; } - drv_info->rx_buffer = alloc_pages_exact(RXTX_BUFFER_SIZE, GFP_KERNEL); + ret = ffa_features(FFA_FN_NATIVE(RXTX_MAP), 0, &buf_sz, NULL); + if (!ret) { + if (RXTX_MAP_MIN_BUFSZ(buf_sz) == 1) + rxtx_bufsz = SZ_64K; + else if (RXTX_MAP_MIN_BUFSZ(buf_sz) == 2) + rxtx_bufsz = SZ_16K; + else + rxtx_bufsz = SZ_4K; + } + + drv_info->rxtx_bufsz = rxtx_bufsz; + drv_info->rx_buffer = alloc_pages_exact(rxtx_bufsz, GFP_KERNEL); if (!drv_info->rx_buffer) { ret = -ENOMEM; goto free_pages; } - drv_info->tx_buffer = alloc_pages_exact(RXTX_BUFFER_SIZE, GFP_KERNEL); + drv_info->tx_buffer = alloc_pages_exact(rxtx_bufsz, GFP_KERNEL); if (!drv_info->tx_buffer) { ret = -ENOMEM; goto free_pages; @@ -1637,7 +1768,7 @@ static int __init ffa_init(void) ret = ffa_rxtx_map(virt_to_phys(drv_info->tx_buffer), virt_to_phys(drv_info->rx_buffer), - RXTX_BUFFER_SIZE / FFA_PAGE_SIZE); + rxtx_bufsz / FFA_PAGE_SIZE); if (ret) { pr_err("failed to register FFA RxTx buffers\n"); goto free_pages; @@ -1646,7 +1777,7 @@ static int __init ffa_init(void) mutex_init(&drv_info->rx_lock); mutex_init(&drv_info->tx_lock); - ffa_set_up_mem_ops_native_flag(); + ffa_drvinfo_flags_init(); ffa_notifications_setup(); @@ -1667,8 +1798,8 @@ cleanup_notifs: ffa_notifications_cleanup(); free_pages: if (drv_info->tx_buffer) - free_pages_exact(drv_info->tx_buffer, RXTX_BUFFER_SIZE); - free_pages_exact(drv_info->rx_buffer, RXTX_BUFFER_SIZE); + free_pages_exact(drv_info->tx_buffer, rxtx_bufsz); + free_pages_exact(drv_info->rx_buffer, rxtx_bufsz); free_drv_info: kfree(drv_info); return ret; @@ -1680,8 +1811,8 @@ static void __exit ffa_exit(void) ffa_notifications_cleanup(); ffa_partitions_cleanup(); ffa_rxtx_unmap(drv_info->vm_id); - free_pages_exact(drv_info->tx_buffer, RXTX_BUFFER_SIZE); - free_pages_exact(drv_info->rx_buffer, RXTX_BUFFER_SIZE); + free_pages_exact(drv_info->tx_buffer, drv_info->rxtx_bufsz); + free_pages_exact(drv_info->rx_buffer, drv_info->rxtx_bufsz); kfree(drv_info); } module_exit(ffa_exit); diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig index aa5842be19b2..dabd874641d0 100644 --- a/drivers/firmware/arm_scmi/Kconfig +++ b/drivers/firmware/arm_scmi/Kconfig @@ -55,116 +55,22 @@ config ARM_SCMI_RAW_MODE_SUPPORT_COEX operate normally, thing which could make an SCMI test suite using the SCMI Raw mode support unreliable. If unsure, say N. -config ARM_SCMI_HAVE_TRANSPORT - bool - help - This declares whether at least one SCMI transport has been configured. - Used to trigger a build bug when trying to build SCMI without any - configured transport. - -config ARM_SCMI_HAVE_SHMEM - bool - help - This declares whether a shared memory based transport for SCMI is - available. - -config ARM_SCMI_HAVE_MSG - bool - help - This declares whether a message passing based transport for SCMI is - available. - -config ARM_SCMI_TRANSPORT_MAILBOX - bool "SCMI transport based on Mailbox" - depends on MAILBOX - select ARM_SCMI_HAVE_TRANSPORT - select ARM_SCMI_HAVE_SHMEM - default y - help - Enable mailbox based transport for SCMI. - - If you want the ARM SCMI PROTOCOL stack to include support for a - transport based on mailboxes, answer Y. - -config ARM_SCMI_TRANSPORT_OPTEE - bool "SCMI transport based on OP-TEE service" - depends on OPTEE=y || OPTEE=ARM_SCMI_PROTOCOL - select ARM_SCMI_HAVE_TRANSPORT - select ARM_SCMI_HAVE_SHMEM - select ARM_SCMI_HAVE_MSG - default y - help - This enables the OP-TEE service based transport for SCMI. - - If you want the ARM SCMI PROTOCOL stack to include support for a - transport based on OP-TEE SCMI service, answer Y. - -config ARM_SCMI_TRANSPORT_SMC - bool "SCMI transport based on SMC" - depends on HAVE_ARM_SMCCC_DISCOVERY - select ARM_SCMI_HAVE_TRANSPORT - select ARM_SCMI_HAVE_SHMEM - default y - help - Enable SMC based transport for SCMI. - - If you want the ARM SCMI PROTOCOL stack to include support for a - transport based on SMC, answer Y. - -config ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE - bool "Enable atomic mode support for SCMI SMC transport" - depends on ARM_SCMI_TRANSPORT_SMC - help - Enable support of atomic operation for SCMI SMC based transport. - - If you want the SCMI SMC based transport to operate in atomic - mode, avoiding any kind of sleeping behaviour for selected - transactions on the TX path, answer Y. - Enabling atomic mode operations allows any SCMI driver using this - transport to optionally ask for atomic SCMI transactions and operate - in atomic context too, at the price of using a number of busy-waiting - primitives all over instead. If unsure say N. - -config ARM_SCMI_TRANSPORT_VIRTIO - bool "SCMI transport based on VirtIO" - depends on VIRTIO=y || VIRTIO=ARM_SCMI_PROTOCOL - select ARM_SCMI_HAVE_TRANSPORT - select ARM_SCMI_HAVE_MSG - help - This enables the virtio based transport for SCMI. - - If you want the ARM SCMI PROTOCOL stack to include support for a - transport based on VirtIO, answer Y. - -config ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE - bool "SCMI VirtIO transport Version 1 compliance" - depends on ARM_SCMI_TRANSPORT_VIRTIO - default y - help - This enforces strict compliance with VirtIO Version 1 specification. - - If you want the ARM SCMI VirtIO transport layer to refuse to work - with Legacy VirtIO backends and instead support only VirtIO Version 1 - devices (or above), answer Y. - - If you want instead to support also old Legacy VirtIO backends (like - the ones implemented by kvmtool) and let the core Kernel VirtIO layer - take care of the needed conversions, say N. - -config ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE - bool "Enable atomic mode for SCMI VirtIO transport" - depends on ARM_SCMI_TRANSPORT_VIRTIO +config ARM_SCMI_DEBUG_COUNTERS + bool "Enable SCMI communication debug metrics tracking" + select ARM_SCMI_NEED_DEBUGFS + depends on DEBUG_FS + default n help - Enable support of atomic operation for SCMI VirtIO based transport. + Enables tracking of some key communication metrics for debug + purposes. It may track metrics like how many messages were sent + or received, were there any failures, what kind of failures, ..etc. - If you want the SCMI VirtIO based transport to operate in atomic - mode, avoiding any kind of sleeping behaviour for selected - transactions on the TX path, answer Y. + Enable this option to create a new debugfs directory which contains + such useful debug counters. This can be helpful for debugging and + SCMI monitoring. - Enabling atomic mode operations allows any SCMI driver using this - transport to optionally ask for atomic SCMI transactions and operate - in atomic context too, at the price of using a number of busy-waiting - primitives all over instead. If unsure say N. +source "drivers/firmware/arm_scmi/transports/Kconfig" +source "drivers/firmware/arm_scmi/vendors/imx/Kconfig" endif #ARM_SCMI_PROTOCOL diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile index fd59f58ce8a2..9ac81adff567 100644 --- a/drivers/firmware/arm_scmi/Makefile +++ b/drivers/firmware/arm_scmi/Makefile @@ -5,23 +5,15 @@ scmi-core-objs := $(scmi-bus-y) scmi-driver-y = driver.o notify.o scmi-driver-$(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) += raw_mode.o scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o -scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += mailbox.o -scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += smc.o scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o -scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o -scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += optee.o scmi-protocols-y := base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o powercap.o scmi-protocols-y += pinctrl.o scmi-module-objs := $(scmi-driver-y) $(scmi-protocols-y) $(scmi-transport-y) +obj-$(CONFIG_ARM_SCMI_PROTOCOL) += transports/ +obj-$(CONFIG_ARM_SCMI_PROTOCOL) += vendors/imx/ + obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-core.o obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o obj-$(CONFIG_ARM_SCMI_POWER_CONTROL) += scmi_power_control.o - -ifeq ($(CONFIG_THUMB2_KERNEL)$(CONFIG_CC_IS_CLANG),yy) -# The use of R7 in the SMCCC conflicts with the compiler's use of R7 as a frame -# pointer in Thumb2 mode, which is forcibly enabled by Clang when profiling -# hooks are inserted via the -pg switch. -CFLAGS_REMOVE_smc.o += $(CC_FLAGS_FTRACE) -endif diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c index 97254de35ab0..86b376c50a13 100644 --- a/drivers/firmware/arm_scmi/base.c +++ b/drivers/firmware/arm_scmi/base.c @@ -14,7 +14,7 @@ #include "notify.h" /* Updated only after ALL the mandatory features for that version are merged */ -#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x20000 +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x20001 #define SCMI_BASE_NUM_SOURCES 1 #define SCMI_BASE_MAX_CMD_ERR_COUNT 1024 @@ -42,7 +42,6 @@ struct scmi_msg_resp_base_discover_agent { u8 name[SCMI_SHORT_NAME_MAX_SIZE]; }; - struct scmi_msg_base_error_notify { __le32 event_control; #define BASE_TP_NOTIFY_ALL BIT(0) @@ -105,7 +104,6 @@ scmi_base_vendor_id_get(const struct scmi_protocol_handle *ph, bool sub_vendor) struct scmi_xfer *t; struct scmi_revision_info *rev = ph->get_priv(ph); - if (sub_vendor) { cmd = BASE_DISCOVER_SUB_VENDOR; vendor_id = rev->sub_vendor_id; @@ -386,7 +384,7 @@ static int scmi_base_protocol_init(const struct scmi_protocol_handle *ph) if (ret) return ret; - rev->major_ver = PROTOCOL_REV_MAJOR(version), + rev->major_ver = PROTOCOL_REV_MAJOR(version); rev->minor_ver = PROTOCOL_REV_MINOR(version); ph->set_priv(ph, rev, version); diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c index 96b2e5f9a8ef..157172a5f2b5 100644 --- a/drivers/firmware/arm_scmi/bus.c +++ b/drivers/firmware/arm_scmi/bus.c @@ -325,7 +325,10 @@ EXPORT_SYMBOL_GPL(scmi_driver_unregister); static void scmi_device_release(struct device *dev) { - kfree(to_scmi_dev(dev)); + struct scmi_device *scmi_dev = to_scmi_dev(dev); + + kfree_const(scmi_dev->name); + kfree(scmi_dev); } static void __scmi_device_destroy(struct scmi_device *scmi_dev) @@ -338,7 +341,6 @@ static void __scmi_device_destroy(struct scmi_device *scmi_dev) if (scmi_dev->protocol_id == SCMI_PROTOCOL_SYSTEM) atomic_set(&scmi_syspower_registered, 0); - kfree_const(scmi_dev->name); ida_free(&scmi_bus_id, scmi_dev->id); device_unregister(&scmi_dev->dev); } @@ -410,7 +412,6 @@ __scmi_device_create(struct device_node *np, struct device *parent, return scmi_dev; put_dev: - kfree_const(scmi_dev->name); put_device(&scmi_dev->dev); ida_free(&scmi_bus_id, id); return NULL; diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c index 134019297d08..2ed2279388f0 100644 --- a/drivers/firmware/arm_scmi/clock.c +++ b/drivers/firmware/arm_scmi/clock.c @@ -365,6 +365,7 @@ static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph, ret = ph->xops->do_xfer(ph, t); if (!ret) { u32 latency = 0; + attributes = le32_to_cpu(attr->attributes); strscpy(clk->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE); /* clock_enable_latency field is present only since SCMI v3.1 */ diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h index 4b8c5250cdb5..cdec50a698a1 100644 --- a/drivers/firmware/arm_scmi/common.h +++ b/drivers/firmware/arm_scmi/common.h @@ -4,7 +4,7 @@ * driver common header file containing some definitions, structures * and function prototypes used in all the different SCMI protocols. * - * Copyright (C) 2018-2022 ARM Ltd. + * Copyright (C) 2018-2024 ARM Ltd. */ #ifndef _SCMI_COMMON_H #define _SCMI_COMMON_H @@ -22,7 +22,7 @@ #include <linux/spinlock.h> #include <linux/types.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "protocols.h" #include "notify.h" @@ -163,6 +163,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id); * used to initialize this channel * @dev: Reference to device in the SCMI hierarchy corresponding to this * channel + * @is_p2a: A flag to identify a channel as P2A (RX) * @rx_timeout_ms: The configured RX timeout in milliseconds. * @handle: Pointer to SCMI entity handle * @no_completion_irq: Flag to indicate that this channel has no completion @@ -174,6 +175,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id); struct scmi_chan_info { int id; struct device *dev; + bool is_p2a; unsigned int rx_timeout_ms; struct scmi_handle *handle; bool no_completion_irq; @@ -183,7 +185,6 @@ struct scmi_chan_info { /** * struct scmi_transport_ops - Structure representing a SCMI transport ops * - * @link_supplier: Optional callback to add link to a supplier device * @chan_available: Callback to check if channel is available or not * @chan_setup: Callback to allocate and setup a channel * @chan_free: Callback to free a channel @@ -198,7 +199,6 @@ struct scmi_chan_info { * @poll_done: Callback to poll transfer status */ struct scmi_transport_ops { - int (*link_supplier)(struct device *dev); bool (*chan_available)(struct device_node *of_node, int idx); int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev, bool tx); @@ -219,12 +219,6 @@ struct scmi_transport_ops { /** * struct scmi_desc - Description of SoC integration * - * @transport_init: An optional function that a transport can provide to - * initialize some transport-specific setup during SCMI core - * initialization, so ahead of SCMI core probing. - * @transport_exit: An optional function that a transport can provide to - * de-initialize some transport-specific setup during SCMI core - * de-initialization, so after SCMI core removal. * @ops: Pointer to the transport specific ops structure * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds) * @max_msg: Maximum number of messages for a channel type (tx or rx) that can @@ -245,8 +239,6 @@ struct scmi_transport_ops { * when requested. */ struct scmi_desc { - int (*transport_init)(void); - void (*transport_exit)(void); const struct scmi_transport_ops *ops; int max_rx_timeout_ms; int max_msg; @@ -286,20 +278,30 @@ int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle, int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer, unsigned int timeout_ms); -#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX -extern const struct scmi_desc scmi_mailbox_desc; -#endif -#ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC -extern const struct scmi_desc scmi_smc_desc; -#endif -#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO -extern const struct scmi_desc scmi_virtio_desc; -#endif -#ifdef CONFIG_ARM_SCMI_TRANSPORT_OPTEE -extern const struct scmi_desc scmi_optee_desc; -#endif - -void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv); + +enum debug_counters { + SENT_OK, + SENT_FAIL, + SENT_FAIL_POLLING_UNSUPPORTED, + SENT_FAIL_CHANNEL_NOT_FOUND, + RESPONSE_OK, + NOTIFICATION_OK, + DELAYED_RESPONSE_OK, + XFERS_RESPONSE_TIMEOUT, + XFERS_RESPONSE_POLLED_TIMEOUT, + RESPONSE_POLLED_OK, + ERR_MSG_UNEXPECTED, + ERR_MSG_INVALID, + ERR_MSG_NOMEM, + ERR_PROTOCOL, + SCMI_DEBUG_COUNTERS_LAST +}; + +static inline void scmi_inc_count(atomic_t *arr, int stat) +{ + if (IS_ENABLED(CONFIG_ARM_SCMI_DEBUG_COUNTERS)) + atomic_inc(&arr[stat]); +} enum scmi_bad_msg { MSG_UNEXPECTED = -1, @@ -309,24 +311,44 @@ enum scmi_bad_msg { MSG_MBOX_SPURIOUS = -5, }; -void scmi_bad_message_trace(struct scmi_chan_info *cinfo, u32 msg_hdr, - enum scmi_bad_msg err); - /* shmem related declarations */ struct scmi_shared_mem; -void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem, - struct scmi_xfer *xfer, struct scmi_chan_info *cinfo); -u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem); -void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem, +/** + * struct scmi_shared_mem_operations - Transport core operations for + * Shared Memory + * + * @tx_prepare: Prepare the @xfer message for transmission on the chosen @shmem + * @read_header: Read header of the message currently hold in @shmem + * @fetch_response: Copy the message response from @shmem into @xfer + * @fetch_notification: Copy the message notification from @shmem into @xfer + * @clear_channel: Clear the @shmem channel busy flag + * @poll_done: Check if poll has completed for @xfer on @shmem + * @channel_free: Check if @shmem channel is marked as free + * @channel_intr_enabled: Check is @shmem channel has requested a completion irq + * @setup_iomap: Setup IO shared memory for channel @cinfo + */ +struct scmi_shared_mem_operations { + void (*tx_prepare)(struct scmi_shared_mem __iomem *shmem, + struct scmi_xfer *xfer, + struct scmi_chan_info *cinfo); + u32 (*read_header)(struct scmi_shared_mem __iomem *shmem); + + void (*fetch_response)(struct scmi_shared_mem __iomem *shmem, + struct scmi_xfer *xfer); + void (*fetch_notification)(struct scmi_shared_mem __iomem *shmem, + size_t max_len, struct scmi_xfer *xfer); + void (*clear_channel)(struct scmi_shared_mem __iomem *shmem); + bool (*poll_done)(struct scmi_shared_mem __iomem *shmem, struct scmi_xfer *xfer); -void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem, - size_t max_len, struct scmi_xfer *xfer); -void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem); -bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem, - struct scmi_xfer *xfer); -bool shmem_channel_free(struct scmi_shared_mem __iomem *shmem); -bool shmem_channel_intr_enabled(struct scmi_shared_mem __iomem *shmem); + bool (*channel_free)(struct scmi_shared_mem __iomem *shmem); + bool (*channel_intr_enabled)(struct scmi_shared_mem __iomem *shmem); + void __iomem *(*setup_iomap)(struct scmi_chan_info *cinfo, + struct device *dev, + bool tx, struct resource *res); +}; + +const struct scmi_shared_mem_operations *scmi_shared_mem_operations_get(void); /* declarations for message passing transports */ struct scmi_msg_payld; @@ -334,14 +356,108 @@ struct scmi_msg_payld; /* Maximum overhead of message w.r.t. struct scmi_desc.max_msg_size */ #define SCMI_MSG_MAX_PROT_OVERHEAD (2 * sizeof(__le32)) -size_t msg_response_size(struct scmi_xfer *xfer); -size_t msg_command_size(struct scmi_xfer *xfer); -void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer); -u32 msg_read_header(struct scmi_msg_payld *msg); -void msg_fetch_response(struct scmi_msg_payld *msg, size_t len, - struct scmi_xfer *xfer); -void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len, - size_t max_len, struct scmi_xfer *xfer); +/** + * struct scmi_message_operations - Transport core operations for Message + * + * @response_size: Get calculated response size for @xfer + * @command_size: Get calculated command size for @xfer + * @tx_prepare: Prepare the @xfer message for transmission on the provided @msg + * @read_header: Read header of the message currently hold in @msg + * @fetch_response: Copy the message response from @msg into @xfer + * @fetch_notification: Copy the message notification from @msg into @xfer + */ +struct scmi_message_operations { + size_t (*response_size)(struct scmi_xfer *xfer); + size_t (*command_size)(struct scmi_xfer *xfer); + void (*tx_prepare)(struct scmi_msg_payld *msg, struct scmi_xfer *xfer); + u32 (*read_header)(struct scmi_msg_payld *msg); + void (*fetch_response)(struct scmi_msg_payld *msg, size_t len, + struct scmi_xfer *xfer); + void (*fetch_notification)(struct scmi_msg_payld *msg, size_t len, + size_t max_len, struct scmi_xfer *xfer); +}; + +const struct scmi_message_operations *scmi_message_operations_get(void); + +/** + * struct scmi_transport_core_operations - Transpoert core operations + * + * @bad_message_trace: An helper to report a malformed/unexpected message + * @rx_callback: Callback to report received messages + * @shmem: Datagram operations for shared memory based transports + * @msg: Datagram operations for message based transports + */ +struct scmi_transport_core_operations { + void (*bad_message_trace)(struct scmi_chan_info *cinfo, + u32 msg_hdr, enum scmi_bad_msg err); + void (*rx_callback)(struct scmi_chan_info *cinfo, u32 msg_hdr, + void *priv); + const struct scmi_shared_mem_operations *shmem; + const struct scmi_message_operations *msg; +}; + +/** + * struct scmi_transport - A structure representing a configured transport + * + * @supplier: Device representing the transport and acting as a supplier for + * the core SCMI stack + * @desc: Transport descriptor + * @core_ops: A pointer to a pointer used by the core SCMI stack to make the + * core transport operations accessible to the transports. + */ +struct scmi_transport { + struct device *supplier; + struct scmi_desc *desc; + struct scmi_transport_core_operations **core_ops; +}; + +#define DEFINE_SCMI_TRANSPORT_DRIVER(__tag, __drv, __desc, __match, __core_ops)\ +static void __tag##_dev_free(void *data) \ +{ \ + struct platform_device *spdev = data; \ + \ + platform_device_unregister(spdev); \ +} \ + \ +static int __tag##_probe(struct platform_device *pdev) \ +{ \ + struct device *dev = &pdev->dev; \ + struct platform_device *spdev; \ + struct scmi_transport strans; \ + int ret; \ + \ + spdev = platform_device_alloc("arm-scmi", PLATFORM_DEVID_AUTO); \ + if (!spdev) \ + return -ENOMEM; \ + \ + device_set_of_node_from_dev(&spdev->dev, dev); \ + \ + strans.supplier = dev; \ + strans.desc = &(__desc); \ + strans.core_ops = &(__core_ops); \ + \ + ret = platform_device_add_data(spdev, &strans, sizeof(strans)); \ + if (ret) \ + goto err; \ + \ + ret = platform_device_add(spdev); \ + if (ret) \ + goto err; \ + \ + return devm_add_action_or_reset(dev, __tag##_dev_free, spdev); \ + \ +err: \ + platform_device_put(spdev); \ + return ret; \ +} \ + \ +static struct platform_driver __drv = { \ + .driver = { \ + .name = #__tag "_transport", \ + .of_match_table = __match, \ + }, \ + .probe = __tag##_probe, \ +} void scmi_notification_instance_data_set(const struct scmi_handle *handle, void *priv); diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 6b6957f4743f..f8934d049d68 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -11,7 +11,7 @@ * various power domain DVFS including the core/cluster, certain system * clocks configuration, thermal sensors and many others. * - * Copyright (C) 2018-2021 ARM Ltd. + * Copyright (C) 2018-2024 ARM Ltd. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -117,12 +117,14 @@ struct scmi_protocol_instance { * @name: Name of this SCMI instance * @type: Type of this SCMI instance * @is_atomic: Flag to state if the transport of this instance is atomic + * @counters: An array of atomic_c's used for tracking statistics (if enabled) */ struct scmi_debug_info { struct dentry *top_dentry; const char *name; const char *type; bool is_atomic; + atomic_t counters[SCMI_DEBUG_COUNTERS_LAST]; }; /** @@ -194,6 +196,16 @@ struct scmi_info { #define bus_nb_to_scmi_info(nb) container_of(nb, struct scmi_info, bus_nb) #define req_nb_to_scmi_info(nb) container_of(nb, struct scmi_info, dev_req_nb) +static void scmi_rx_callback(struct scmi_chan_info *cinfo, + u32 msg_hdr, void *priv); +static void scmi_bad_message_trace(struct scmi_chan_info *cinfo, + u32 msg_hdr, enum scmi_bad_msg err); + +static struct scmi_transport_core_operations scmi_trans_core_ops = { + .bad_message_trace = scmi_bad_message_trace, + .rx_callback = scmi_rx_callback, +}; + static unsigned long scmi_vendor_protocol_signature(unsigned int protocol_id, char *vendor_id, char *sub_vendor_id, u32 impl_ver) @@ -833,8 +845,8 @@ scmi_xfer_lookup_unlocked(struct scmi_xfers_info *minfo, u16 xfer_id) * timed-out message that arrives and as such, can be traced only referring to * the header content, since the payload is missing/unreliable. */ -void scmi_bad_message_trace(struct scmi_chan_info *cinfo, u32 msg_hdr, - enum scmi_bad_msg err) +static void scmi_bad_message_trace(struct scmi_chan_info *cinfo, u32 msg_hdr, + enum scmi_bad_msg err) { char *tag; struct scmi_info *info = handle_to_scmi_info(cinfo->handle); @@ -988,6 +1000,7 @@ scmi_xfer_command_acquire(struct scmi_chan_info *cinfo, u32 msg_hdr) spin_unlock_irqrestore(&minfo->xfer_lock, flags); scmi_bad_message_trace(cinfo, msg_hdr, MSG_UNEXPECTED); + scmi_inc_count(info->dbg->counters, ERR_MSG_UNEXPECTED); return xfer; } @@ -1015,6 +1028,7 @@ scmi_xfer_command_acquire(struct scmi_chan_info *cinfo, u32 msg_hdr) msg_type, xfer_id, msg_hdr, xfer->state); scmi_bad_message_trace(cinfo, msg_hdr, MSG_INVALID); + scmi_inc_count(info->dbg->counters, ERR_MSG_INVALID); /* On error the refcount incremented above has to be dropped */ __scmi_xfer_put(minfo, xfer); @@ -1034,6 +1048,11 @@ static inline void scmi_xfer_command_release(struct scmi_info *info, static inline void scmi_clear_channel(struct scmi_info *info, struct scmi_chan_info *cinfo) { + if (!cinfo->is_p2a) { + dev_warn(cinfo->dev, "Invalid clear on A2P channel !\n"); + return; + } + if (info->desc->ops->clear_channel) info->desc->ops->clear_channel(cinfo); } @@ -1054,6 +1073,7 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo, PTR_ERR(xfer)); scmi_bad_message_trace(cinfo, msg_hdr, MSG_NOMEM); + scmi_inc_count(info->dbg->counters, ERR_MSG_NOMEM); scmi_clear_channel(info, cinfo); return; @@ -1069,6 +1089,7 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo, trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id, xfer->hdr.id, "NOTI", xfer->hdr.seq, xfer->hdr.status, xfer->rx.buf, xfer->rx.len); + scmi_inc_count(info->dbg->counters, NOTIFICATION_OK); scmi_notify(cinfo->handle, xfer->hdr.protocol_id, xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts); @@ -1128,8 +1149,10 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo, if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP) { scmi_clear_channel(info, cinfo); complete(xfer->async_done); + scmi_inc_count(info->dbg->counters, DELAYED_RESPONSE_OK); } else { complete(&xfer->done); + scmi_inc_count(info->dbg->counters, RESPONSE_OK); } if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) { @@ -1160,7 +1183,8 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo, * NOTE: This function will be invoked in IRQ context, hence should be * as optimal as possible. */ -void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv) +static void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, + void *priv) { u8 msg_type = MSG_XTRACT_TYPE(msg_hdr); @@ -1213,6 +1237,7 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc, struct scmi_xfer *xfer, unsigned int timeout_ms) { int ret = 0; + struct scmi_info *info = handle_to_scmi_info(cinfo->handle); if (xfer->hdr.poll_completion) { /* @@ -1233,13 +1258,12 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc, "timed out in resp(caller: %pS) - polling\n", (void *)_RET_IP_); ret = -ETIMEDOUT; + scmi_inc_count(info->dbg->counters, XFERS_RESPONSE_POLLED_TIMEOUT); } } if (!ret) { unsigned long flags; - struct scmi_info *info = - handle_to_scmi_info(cinfo->handle); /* * Do not fetch_response if an out-of-order delayed @@ -1259,11 +1283,9 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc, "RESP" : "resp", xfer->hdr.seq, xfer->hdr.status, xfer->rx.buf, xfer->rx.len); + scmi_inc_count(info->dbg->counters, RESPONSE_POLLED_OK); if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) { - struct scmi_info *info = - handle_to_scmi_info(cinfo->handle); - scmi_raw_message_report(info->raw, xfer, SCMI_RAW_REPLY_QUEUE, cinfo->id); @@ -1276,6 +1298,7 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc, dev_err(dev, "timed out in resp(caller: %pS)\n", (void *)_RET_IP_); ret = -ETIMEDOUT; + scmi_inc_count(info->dbg->counters, XFERS_RESPONSE_TIMEOUT); } } @@ -1359,13 +1382,15 @@ static int do_xfer(const struct scmi_protocol_handle *ph, !is_transport_polling_capable(info->desc)) { dev_warn_once(dev, "Polling mode is not supported by transport.\n"); + scmi_inc_count(info->dbg->counters, SENT_FAIL_POLLING_UNSUPPORTED); return -EINVAL; } cinfo = idr_find(&info->tx_idr, pi->proto->id); - if (unlikely(!cinfo)) + if (unlikely(!cinfo)) { + scmi_inc_count(info->dbg->counters, SENT_FAIL_CHANNEL_NOT_FOUND); return -EINVAL; - + } /* True ONLY if also supported by transport. */ if (is_polling_enabled(cinfo, info->desc)) xfer->hdr.poll_completion = true; @@ -1397,16 +1422,20 @@ static int do_xfer(const struct scmi_protocol_handle *ph, ret = info->desc->ops->send_message(cinfo, xfer); if (ret < 0) { dev_dbg(dev, "Failed to send message %d\n", ret); + scmi_inc_count(info->dbg->counters, SENT_FAIL); return ret; } trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id, xfer->hdr.id, "CMND", xfer->hdr.seq, xfer->hdr.status, xfer->tx.buf, xfer->tx.len); + scmi_inc_count(info->dbg->counters, SENT_OK); ret = scmi_wait_for_message_response(cinfo, xfer); - if (!ret && xfer->hdr.status) + if (!ret && xfer->hdr.status) { ret = scmi_to_linux_errno(xfer->hdr.status); + scmi_inc_count(info->dbg->counters, ERR_PROTOCOL); + } if (info->desc->ops->mark_txdone) info->desc->ops->mark_txdone(cinfo, ret, xfer); @@ -2614,6 +2643,7 @@ static int scmi_chan_setup(struct scmi_info *info, struct device_node *of_node, if (!cinfo) return -ENOMEM; + cinfo->is_p2a = !tx; cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms; /* Create a unique name for this transport device */ @@ -2708,14 +2738,14 @@ scmi_txrx_setup(struct scmi_info *info, struct device_node *of_node, static int scmi_channels_setup(struct scmi_info *info) { int ret; - struct device_node *child, *top_np = info->dev->of_node; + struct device_node *top_np = info->dev->of_node; /* Initialize a common generic channel at first */ ret = scmi_txrx_setup(info, top_np, SCMI_PROTOCOL_BASE); if (ret) return ret; - for_each_available_child_of_node(top_np, child) { + for_each_available_child_of_node_scoped(top_np, child) { u32 prot_id; if (of_property_read_u32(child, "reg", &prot_id)) @@ -2726,10 +2756,8 @@ static int scmi_channels_setup(struct scmi_info *info) "Out of range protocol %d\n", prot_id); ret = scmi_txrx_setup(info, child, prot_id); - if (ret) { - of_node_put(child); + if (ret) return ret; - } } return 0; @@ -2833,6 +2861,55 @@ static int scmi_device_request_notifier(struct notifier_block *nb, return NOTIFY_OK; } +static const char * const dbg_counter_strs[] = { + "sent_ok", + "sent_fail", + "sent_fail_polling_unsupported", + "sent_fail_channel_not_found", + "response_ok", + "notification_ok", + "delayed_response_ok", + "xfers_response_timeout", + "xfers_response_polled_timeout", + "response_polled_ok", + "err_msg_unexpected", + "err_msg_invalid", + "err_msg_nomem", + "err_protocol", +}; + +static ssize_t reset_all_on_write(struct file *filp, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct scmi_debug_info *dbg = filp->private_data; + + for (int i = 0; i < SCMI_DEBUG_COUNTERS_LAST; i++) + atomic_set(&dbg->counters[i], 0); + + return count; +} + +static const struct file_operations fops_reset_counts = { + .owner = THIS_MODULE, + .open = simple_open, + .write = reset_all_on_write, +}; + +static void scmi_debugfs_counters_setup(struct scmi_debug_info *dbg, + struct dentry *trans) +{ + struct dentry *counters; + int idx; + + counters = debugfs_create_dir("counters", trans); + + for (idx = 0; idx < SCMI_DEBUG_COUNTERS_LAST; idx++) + debugfs_create_atomic_t(dbg_counter_strs[idx], 0600, counters, + &dbg->counters[idx]); + + debugfs_create_file("reset", 0200, counters, dbg, &fops_reset_counts); +} + static void scmi_debugfs_common_cleanup(void *d) { struct scmi_debug_info *dbg = d; @@ -2899,13 +2976,14 @@ static struct scmi_debug_info *scmi_debugfs_common_setup(struct scmi_info *info) debugfs_create_u32("rx_max_msg", 0400, trans, (u32 *)&info->rx_minfo.max_msg); + if (IS_ENABLED(CONFIG_ARM_SCMI_DEBUG_COUNTERS)) + scmi_debugfs_counters_setup(dbg, trans); + dbg->top_dentry = top_dentry; if (devm_add_action_or_reset(info->dev, - scmi_debugfs_common_cleanup, dbg)) { - scmi_debugfs_common_cleanup(dbg); + scmi_debugfs_common_cleanup, dbg)) return NULL; - } return dbg; } @@ -2950,6 +3028,37 @@ static int scmi_debugfs_raw_mode_setup(struct scmi_info *info) return ret; } +static const struct scmi_desc *scmi_transport_setup(struct device *dev) +{ + struct scmi_transport *trans; + int ret; + + trans = dev_get_platdata(dev); + if (!trans || !trans->desc || !trans->supplier || !trans->core_ops) + return NULL; + + if (!device_link_add(dev, trans->supplier, DL_FLAG_AUTOREMOVE_CONSUMER)) { + dev_err(dev, + "Adding link to supplier transport device failed\n"); + return NULL; + } + + /* Provide core transport ops */ + *trans->core_ops = &scmi_trans_core_ops; + + dev_info(dev, "Using %s\n", dev_driver_string(trans->supplier)); + + ret = of_property_read_u32(dev->of_node, "arm,max-rx-timeout-ms", + &trans->desc->max_rx_timeout_ms); + if (ret && ret != -EINVAL) + dev_err(dev, "Malformed arm,max-rx-timeout-ms DT property.\n"); + + dev_info(dev, "SCMI max-rx-timeout: %dms\n", + trans->desc->max_rx_timeout_ms); + + return trans->desc; +} + static int scmi_probe(struct platform_device *pdev) { int ret; @@ -2961,9 +3070,12 @@ static int scmi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *child, *np = dev->of_node; - desc = of_device_get_match_data(dev); - if (!desc) - return -EINVAL; + desc = scmi_transport_setup(dev); + if (!desc) { + err_str = "transport invalid\n"; + ret = -EINVAL; + goto out_err; + } info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); if (!info) @@ -3002,14 +3114,6 @@ static int scmi_probe(struct platform_device *pdev) info->atomic_threshold); handle->is_transport_atomic = scmi_is_transport_atomic; - if (desc->ops->link_supplier) { - ret = desc->ops->link_supplier(dev); - if (ret) { - err_str = "transport not ready\n"; - goto clear_ida; - } - } - /* Setup all channels described in the DT at first */ ret = scmi_channels_setup(info); if (ret) { @@ -3130,6 +3234,7 @@ clear_txrx_setup: clear_ida: ida_free(&scmi_id, info->id); +out_err: return dev_err_probe(dev, ret, "%s", err_str); } @@ -3215,86 +3320,16 @@ static struct attribute *versions_attrs[] = { }; ATTRIBUTE_GROUPS(versions); -/* Each compatible listed below must have descriptor associated with it */ -static const struct of_device_id scmi_of_match[] = { -#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX - { .compatible = "arm,scmi", .data = &scmi_mailbox_desc }, -#endif -#ifdef CONFIG_ARM_SCMI_TRANSPORT_OPTEE - { .compatible = "linaro,scmi-optee", .data = &scmi_optee_desc }, -#endif -#ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC - { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc}, - { .compatible = "arm,scmi-smc-param", .data = &scmi_smc_desc}, - { .compatible = "qcom,scmi-smc", .data = &scmi_smc_desc}, -#endif -#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO - { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc}, -#endif - { /* Sentinel */ }, -}; - -MODULE_DEVICE_TABLE(of, scmi_of_match); - static struct platform_driver scmi_driver = { .driver = { .name = "arm-scmi", .suppress_bind_attrs = true, - .of_match_table = scmi_of_match, .dev_groups = versions_groups, }, .probe = scmi_probe, .remove_new = scmi_remove, }; -/** - * __scmi_transports_setup - Common helper to call transport-specific - * .init/.exit code if provided. - * - * @init: A flag to distinguish between init and exit. - * - * Note that, if provided, we invoke .init/.exit functions for all the - * transports currently compiled in. - * - * Return: 0 on Success. - */ -static inline int __scmi_transports_setup(bool init) -{ - int ret = 0; - const struct of_device_id *trans; - - for (trans = scmi_of_match; trans->data; trans++) { - const struct scmi_desc *tdesc = trans->data; - - if ((init && !tdesc->transport_init) || - (!init && !tdesc->transport_exit)) - continue; - - if (init) - ret = tdesc->transport_init(); - else - tdesc->transport_exit(); - - if (ret) { - pr_err("SCMI transport %s FAILED initialization!\n", - trans->compatible); - break; - } - } - - return ret; -} - -static int __init scmi_transports_init(void) -{ - return __scmi_transports_setup(true); -} - -static void __exit scmi_transports_exit(void) -{ - __scmi_transports_setup(false); -} - static struct dentry *scmi_debugfs_init(void) { struct dentry *d; @@ -3310,16 +3345,15 @@ static struct dentry *scmi_debugfs_init(void) static int __init scmi_driver_init(void) { - int ret; - /* Bail out if no SCMI transport was configured */ if (WARN_ON(!IS_ENABLED(CONFIG_ARM_SCMI_HAVE_TRANSPORT))) return -EINVAL; - /* Initialize any compiled-in transport which provided an init/exit */ - ret = scmi_transports_init(); - if (ret) - return ret; + if (IS_ENABLED(CONFIG_ARM_SCMI_HAVE_SHMEM)) + scmi_trans_core_ops.shmem = scmi_shared_mem_operations_get(); + + if (IS_ENABLED(CONFIG_ARM_SCMI_HAVE_MSG)) + scmi_trans_core_ops.msg = scmi_message_operations_get(); if (IS_ENABLED(CONFIG_ARM_SCMI_NEED_DEBUGFS)) scmi_top_dentry = scmi_debugfs_init(); @@ -3354,8 +3388,6 @@ static void __exit scmi_driver_exit(void) scmi_powercap_unregister(); scmi_pinctrl_unregister(); - scmi_transports_exit(); - platform_driver_unregister(&scmi_driver); debugfs_remove_recursive(scmi_top_dentry); diff --git a/drivers/firmware/arm_scmi/msg.c b/drivers/firmware/arm_scmi/msg.c index d33a704e5814..2cc74e6bbd72 100644 --- a/drivers/firmware/arm_scmi/msg.c +++ b/drivers/firmware/arm_scmi/msg.c @@ -4,7 +4,7 @@ * * Derived from shm.c. * - * Copyright (C) 2019-2021 ARM Ltd. + * Copyright (C) 2019-2024 ARM Ltd. * Copyright (C) 2020-2021 OpenSynergy GmbH */ @@ -30,7 +30,7 @@ struct scmi_msg_payld { * * Return: transport SDU size. */ -size_t msg_command_size(struct scmi_xfer *xfer) +static size_t msg_command_size(struct scmi_xfer *xfer) { return sizeof(struct scmi_msg_payld) + xfer->tx.len; } @@ -42,7 +42,7 @@ size_t msg_command_size(struct scmi_xfer *xfer) * * Return: transport SDU size. */ -size_t msg_response_size(struct scmi_xfer *xfer) +static size_t msg_response_size(struct scmi_xfer *xfer) { return sizeof(struct scmi_msg_payld) + sizeof(__le32) + xfer->rx.len; } @@ -53,7 +53,7 @@ size_t msg_response_size(struct scmi_xfer *xfer) * @msg: transport SDU for command * @xfer: message which is being sent */ -void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer) +static void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer) { msg->msg_header = cpu_to_le32(pack_scmi_header(&xfer->hdr)); if (xfer->tx.buf) @@ -67,7 +67,7 @@ void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer) * * Return: SCMI header */ -u32 msg_read_header(struct scmi_msg_payld *msg) +static u32 msg_read_header(struct scmi_msg_payld *msg) { return le32_to_cpu(msg->msg_header); } @@ -79,8 +79,8 @@ u32 msg_read_header(struct scmi_msg_payld *msg) * @len: transport SDU size * @xfer: message being responded to */ -void msg_fetch_response(struct scmi_msg_payld *msg, size_t len, - struct scmi_xfer *xfer) +static void msg_fetch_response(struct scmi_msg_payld *msg, + size_t len, struct scmi_xfer *xfer) { size_t prefix_len = sizeof(*msg) + sizeof(msg->msg_payload[0]); @@ -100,8 +100,8 @@ void msg_fetch_response(struct scmi_msg_payld *msg, size_t len, * @max_len: maximum SCMI payload size to fetch * @xfer: notification message */ -void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len, - size_t max_len, struct scmi_xfer *xfer) +static void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len, + size_t max_len, struct scmi_xfer *xfer) { xfer->rx.len = min_t(size_t, max_len, len >= sizeof(*msg) ? len - sizeof(*msg) : 0); @@ -109,3 +109,17 @@ void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len, /* Take a copy to the rx buffer.. */ memcpy(xfer->rx.buf, msg->msg_payload, xfer->rx.len); } + +static const struct scmi_message_operations scmi_msg_ops = { + .tx_prepare = msg_tx_prepare, + .command_size = msg_command_size, + .response_size = msg_response_size, + .read_header = msg_read_header, + .fetch_response = msg_fetch_response, + .fetch_notification = msg_fetch_notification, +}; + +const struct scmi_message_operations *scmi_message_operations_get(void) +{ + return &scmi_msg_ops; +} diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index 4b7f1cbb9b04..2d77b5f40ca7 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -310,7 +310,7 @@ scmi_perf_domain_attributes_get(const struct scmi_protocol_handle *ph, } if (!dom_info->mult_factor) dev_warn(ph->dev, - "Wrong sustained perf/frequency(domain %d)\n", + "Wrong sustained perf/frequency(domain %d)\n", dom_info->id); strscpy(dom_info->info.name, attr->name, diff --git a/drivers/firmware/arm_scmi/pinctrl.c b/drivers/firmware/arm_scmi/pinctrl.c index a2a7f880d6a3..3855c98caf06 100644 --- a/drivers/firmware/arm_scmi/pinctrl.c +++ b/drivers/firmware/arm_scmi/pinctrl.c @@ -913,4 +913,5 @@ static const struct scmi_protocol scmi_pinctrl = { .ops = &pinctrl_proto_ops, .supported_version = SCMI_PROTOCOL_SUPPORTED_VERSION, }; + DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(pinctrl, scmi_pinctrl) diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c index 49666bd1d8ac..59aa16444c64 100644 --- a/drivers/firmware/arm_scmi/power.c +++ b/drivers/firmware/arm_scmi/power.c @@ -14,7 +14,7 @@ #include "notify.h" /* Updated only after ALL the mandatory features for that version are merged */ -#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x30000 +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x30001 enum scmi_power_protocol_cmd { POWER_DOMAIN_ATTRIBUTES = 0x3, diff --git a/drivers/firmware/arm_scmi/protocols.h b/drivers/firmware/arm_scmi/protocols.h index 8e95f53bd7b7..aaee57cdcd55 100644 --- a/drivers/firmware/arm_scmi/protocols.h +++ b/drivers/firmware/arm_scmi/protocols.h @@ -22,7 +22,7 @@ #include <linux/spinlock.h> #include <linux/types.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #define PROTOCOL_REV_MINOR_MASK GENMASK(15, 0) #define PROTOCOL_REV_MAJOR_MASK GENMASK(31, 16) diff --git a/drivers/firmware/arm_scmi/raw_mode.c b/drivers/firmware/arm_scmi/raw_mode.c index 130d13e9cd6b..9e89a6a763da 100644 --- a/drivers/firmware/arm_scmi/raw_mode.c +++ b/drivers/firmware/arm_scmi/raw_mode.c @@ -950,7 +950,6 @@ static const struct file_operations scmi_dbg_raw_mode_reset_fops = { .open = scmi_dbg_raw_mode_open, .release = scmi_dbg_raw_mode_release, .write = scmi_dbg_raw_mode_reset_write, - .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -960,7 +959,6 @@ static const struct file_operations scmi_dbg_raw_mode_message_fops = { .read = scmi_dbg_raw_mode_message_read, .write = scmi_dbg_raw_mode_message_write, .poll = scmi_dbg_raw_mode_message_poll, - .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -977,7 +975,6 @@ static const struct file_operations scmi_dbg_raw_mode_message_async_fops = { .read = scmi_dbg_raw_mode_message_read, .write = scmi_dbg_raw_mode_message_async_write, .poll = scmi_dbg_raw_mode_message_poll, - .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -1001,7 +998,6 @@ static const struct file_operations scmi_dbg_raw_mode_notification_fops = { .release = scmi_dbg_raw_mode_release, .read = scmi_test_dbg_raw_mode_notif_read, .poll = scmi_test_dbg_raw_mode_notif_poll, - .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -1025,7 +1021,6 @@ static const struct file_operations scmi_dbg_raw_mode_errors_fops = { .release = scmi_dbg_raw_mode_release, .read = scmi_test_dbg_raw_mode_errors_read, .poll = scmi_test_dbg_raw_mode_errors_poll, - .llseek = no_llseek, .owner = THIS_MODULE, }; diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c index 1b318316535e..0aa82b96f41b 100644 --- a/drivers/firmware/arm_scmi/reset.c +++ b/drivers/firmware/arm_scmi/reset.c @@ -14,7 +14,7 @@ #include "notify.h" /* Updated only after ALL the mandatory features for that version are merged */ -#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x30000 +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x30001 enum scmi_reset_protocol_cmd { RESET_DOMAIN_ATTRIBUTES = 0x3, diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c index 7fc5535ca34c..791efd0f82d7 100644 --- a/drivers/firmware/arm_scmi/sensors.c +++ b/drivers/firmware/arm_scmi/sensors.c @@ -15,7 +15,7 @@ #include "notify.h" /* Updated only after ALL the mandatory features for that version are merged */ -#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x30000 +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x30001 #define SCMI_MAX_NUM_SENSOR_AXIS 63 #define SCMIv2_SENSOR_PROTOCOL 0x10000 diff --git a/drivers/firmware/arm_scmi/shmem.c b/drivers/firmware/arm_scmi/shmem.c index b74e5a740f2c..01d8a9398fe8 100644 --- a/drivers/firmware/arm_scmi/shmem.c +++ b/drivers/firmware/arm_scmi/shmem.c @@ -2,11 +2,13 @@ /* * For transport using shared mem structure. * - * Copyright (C) 2019 ARM Ltd. + * Copyright (C) 2019-2024 ARM Ltd. */ #include <linux/ktime.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/processor.h> #include <linux/types.h> @@ -32,8 +34,9 @@ struct scmi_shared_mem { u8 msg_payload[]; }; -void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem, - struct scmi_xfer *xfer, struct scmi_chan_info *cinfo) +static void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem, + struct scmi_xfer *xfer, + struct scmi_chan_info *cinfo) { ktime_t stop; @@ -73,13 +76,13 @@ void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem, memcpy_toio(shmem->msg_payload, xfer->tx.buf, xfer->tx.len); } -u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem) +static u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem) { return ioread32(&shmem->msg_header); } -void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem, - struct scmi_xfer *xfer) +static void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem, + struct scmi_xfer *xfer) { size_t len = ioread32(&shmem->length); @@ -91,8 +94,8 @@ void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem, memcpy_fromio(xfer->rx.buf, shmem->msg_payload + 4, xfer->rx.len); } -void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem, - size_t max_len, struct scmi_xfer *xfer) +static void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem, + size_t max_len, struct scmi_xfer *xfer) { size_t len = ioread32(&shmem->length); @@ -103,13 +106,13 @@ void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem, memcpy_fromio(xfer->rx.buf, shmem->msg_payload, xfer->rx.len); } -void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem) +static void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem) { iowrite32(SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE, &shmem->channel_status); } -bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem, - struct scmi_xfer *xfer) +static bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem, + struct scmi_xfer *xfer) { u16 xfer_id; @@ -123,13 +126,69 @@ bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem, SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE); } -bool shmem_channel_free(struct scmi_shared_mem __iomem *shmem) +static bool shmem_channel_free(struct scmi_shared_mem __iomem *shmem) { return (ioread32(&shmem->channel_status) & SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE); } -bool shmem_channel_intr_enabled(struct scmi_shared_mem __iomem *shmem) +static bool shmem_channel_intr_enabled(struct scmi_shared_mem __iomem *shmem) { return ioread32(&shmem->flags) & SCMI_SHMEM_FLAG_INTR_ENABLED; } + +static void __iomem *shmem_setup_iomap(struct scmi_chan_info *cinfo, + struct device *dev, bool tx, + struct resource *res) +{ + struct device_node *shmem __free(device_node); + const char *desc = tx ? "Tx" : "Rx"; + int ret, idx = tx ? 0 : 1; + struct device *cdev = cinfo->dev; + struct resource lres = {}; + resource_size_t size; + void __iomem *addr; + + shmem = of_parse_phandle(cdev->of_node, "shmem", idx); + if (!shmem) + return IOMEM_ERR_PTR(-ENODEV); + + if (!of_device_is_compatible(shmem, "arm,scmi-shmem")) + return IOMEM_ERR_PTR(-ENXIO); + + /* Use a local on-stack as a working area when not provided */ + if (!res) + res = &lres; + + ret = of_address_to_resource(shmem, 0, res); + if (ret) { + dev_err(cdev, "failed to get SCMI %s shared memory\n", desc); + return IOMEM_ERR_PTR(ret); + } + + size = resource_size(res); + addr = devm_ioremap(dev, res->start, size); + if (!addr) { + dev_err(dev, "failed to ioremap SCMI %s shared memory\n", desc); + return IOMEM_ERR_PTR(-EADDRNOTAVAIL); + } + + return addr; +} + +static const struct scmi_shared_mem_operations scmi_shmem_ops = { + .tx_prepare = shmem_tx_prepare, + .read_header = shmem_read_header, + .fetch_response = shmem_fetch_response, + .fetch_notification = shmem_fetch_notification, + .clear_channel = shmem_clear_channel, + .poll_done = shmem_poll_done, + .channel_free = shmem_channel_free, + .channel_intr_enabled = shmem_channel_intr_enabled, + .setup_iomap = shmem_setup_iomap, +}; + +const struct scmi_shared_mem_operations *scmi_shared_mem_operations_get(void) +{ + return &scmi_shmem_ops; +} diff --git a/drivers/firmware/arm_scmi/system.c b/drivers/firmware/arm_scmi/system.c index b6358c155f7f..ec3d355d1772 100644 --- a/drivers/firmware/arm_scmi/system.c +++ b/drivers/firmware/arm_scmi/system.c @@ -14,7 +14,7 @@ #include "notify.h" /* Updated only after ALL the mandatory features for that version are merged */ -#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x20000 +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x20001 #define SCMI_SYSTEM_NUM_SOURCES 1 diff --git a/drivers/firmware/arm_scmi/transports/Kconfig b/drivers/firmware/arm_scmi/transports/Kconfig new file mode 100644 index 000000000000..57eccf316e26 --- /dev/null +++ b/drivers/firmware/arm_scmi/transports/Kconfig @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "SCMI Transport Drivers" + +config ARM_SCMI_HAVE_TRANSPORT + bool + help + This declares whether at least one SCMI transport has been configured. + Used to trigger a build bug when trying to build SCMI without any + configured transport. + +config ARM_SCMI_HAVE_SHMEM + bool + help + This declares whether a shared memory based transport for SCMI is + available. + +config ARM_SCMI_HAVE_MSG + bool + help + This declares whether a message passing based transport for SCMI is + available. + +config ARM_SCMI_TRANSPORT_MAILBOX + tristate "SCMI transport based on Mailbox" + depends on MAILBOX + select ARM_SCMI_HAVE_TRANSPORT + select ARM_SCMI_HAVE_SHMEM + default y + help + Enable mailbox based transport for SCMI. + + If you want the ARM SCMI PROTOCOL stack to include support for a + transport based on mailboxes, answer Y. + This driver can also be built as a module. If so, the module + will be called scmi_transport_mailbox. + +config ARM_SCMI_TRANSPORT_SMC + tristate "SCMI transport based on SMC" + depends on HAVE_ARM_SMCCC_DISCOVERY + select ARM_SCMI_HAVE_TRANSPORT + select ARM_SCMI_HAVE_SHMEM + default y + help + Enable SMC based transport for SCMI. + + If you want the ARM SCMI PROTOCOL stack to include support for a + transport based on SMC, answer Y. + This driver can also be built as a module. If so, the module + will be called scmi_transport_smc. + +config ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE + bool "Enable atomic mode support for SCMI SMC transport" + depends on ARM_SCMI_TRANSPORT_SMC + help + Enable support of atomic operation for SCMI SMC based transport. + + If you want the SCMI SMC based transport to operate in atomic + mode, avoiding any kind of sleeping behaviour for selected + transactions on the TX path, answer Y. + Enabling atomic mode operations allows any SCMI driver using this + transport to optionally ask for atomic SCMI transactions and operate + in atomic context too, at the price of using a number of busy-waiting + primitives all over instead. If unsure say N. + +config ARM_SCMI_TRANSPORT_OPTEE + tristate "SCMI transport based on OP-TEE service" + depends on OPTEE + select ARM_SCMI_HAVE_TRANSPORT + select ARM_SCMI_HAVE_SHMEM + select ARM_SCMI_HAVE_MSG + default y + help + This enables the OP-TEE service based transport for SCMI. + + If you want the ARM SCMI PROTOCOL stack to include support for a + transport based on OP-TEE SCMI service, answer Y. + This driver can also be built as a module. If so, the module + will be called scmi_transport_optee. + +config ARM_SCMI_TRANSPORT_VIRTIO + tristate "SCMI transport based on VirtIO" + depends on VIRTIO + select ARM_SCMI_HAVE_TRANSPORT + select ARM_SCMI_HAVE_MSG + help + This enables the virtio based transport for SCMI. + + If you want the ARM SCMI PROTOCOL stack to include support for a + transport based on VirtIO, answer Y. + This driver can also be built as a module. If so, the module + will be called scmi_transport_virtio. + +config ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE + bool "SCMI VirtIO transport Version 1 compliance" + depends on ARM_SCMI_TRANSPORT_VIRTIO + default y + help + This enforces strict compliance with VirtIO Version 1 specification. + + If you want the ARM SCMI VirtIO transport layer to refuse to work + with Legacy VirtIO backends and instead support only VirtIO Version 1 + devices (or above), answer Y. + + If you want instead to support also old Legacy VirtIO backends (like + the ones implemented by kvmtool) and let the core Kernel VirtIO layer + take care of the needed conversions, say N. + +config ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE + bool "Enable atomic mode for SCMI VirtIO transport" + depends on ARM_SCMI_TRANSPORT_VIRTIO + help + Enable support of atomic operation for SCMI VirtIO based transport. + + If you want the SCMI VirtIO based transport to operate in atomic + mode, avoiding any kind of sleeping behaviour for selected + transactions on the TX path, answer Y. + + Enabling atomic mode operations allows any SCMI driver using this + transport to optionally ask for atomic SCMI transactions and operate + in atomic context too, at the price of using a number of busy-waiting + primitives all over instead. If unsure say N. + +endmenu diff --git a/drivers/firmware/arm_scmi/transports/Makefile b/drivers/firmware/arm_scmi/transports/Makefile new file mode 100644 index 000000000000..3ba3d3bee151 --- /dev/null +++ b/drivers/firmware/arm_scmi/transports/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Keep before scmi_transport_mailbox.o to allow precedence +# while matching the compatible. +scmi_transport_smc-objs := smc.o +obj-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += scmi_transport_smc.o +scmi_transport_mailbox-objs := mailbox.o +obj-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += scmi_transport_mailbox.o +scmi_transport_optee-objs := optee.o +obj-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += scmi_transport_optee.o +scmi_transport_virtio-objs := virtio.o +obj-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += scmi_transport_virtio.o + +ifeq ($(CONFIG_THUMB2_KERNEL)$(CONFIG_CC_IS_CLANG),yy) +# The use of R7 in the SMCCC conflicts with the compiler's use of R7 as a frame +# pointer in Thumb2 mode, which is forcibly enabled by Clang when profiling +# hooks are inserted via the -pg switch. +CFLAGS_REMOVE_smc.o += $(CC_FLAGS_FTRACE) +endif diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/transports/mailbox.c index 0219a12e3209..e3d5f7560990 100644 --- a/drivers/firmware/arm_scmi/mailbox.c +++ b/drivers/firmware/arm_scmi/transports/mailbox.c @@ -3,7 +3,7 @@ * System Control and Management Interface (SCMI) Message Mailbox Transport * driver. * - * Copyright (C) 2019 ARM Ltd. + * Copyright (C) 2019-2024 ARM Ltd. */ #include <linux/err.h> @@ -11,9 +11,10 @@ #include <linux/mailbox_client.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/platform_device.h> #include <linux/slab.h> -#include "common.h" +#include "../common.h" /** * struct scmi_mailbox - Structure representing a SCMI mailbox transport @@ -24,6 +25,7 @@ * @chan_platform_receiver: Optional Platform Receiver mailbox unidirectional channel * @cinfo: SCMI channel info * @shmem: Transmit/Receive shared memory area + * @chan_lock: Lock that prevents multiple xfers from being queued */ struct scmi_mailbox { struct mbox_client cl; @@ -32,15 +34,18 @@ struct scmi_mailbox { struct mbox_chan *chan_platform_receiver; struct scmi_chan_info *cinfo; struct scmi_shared_mem __iomem *shmem; + struct mutex chan_lock; }; #define client_to_scmi_mailbox(c) container_of(c, struct scmi_mailbox, cl) +static struct scmi_transport_core_operations *core; + static void tx_prepare(struct mbox_client *cl, void *m) { struct scmi_mailbox *smbox = client_to_scmi_mailbox(cl); - shmem_tx_prepare(smbox->shmem, m, smbox->cinfo); + core->shmem->tx_prepare(smbox->shmem, m, smbox->cinfo); } static void rx_callback(struct mbox_client *cl, void *m) @@ -56,15 +61,17 @@ static void rx_callback(struct mbox_client *cl, void *m) * a previous timed-out reply which arrived late could be wrongly * associated with the next pending transaction. */ - if (cl->knows_txdone && !shmem_channel_free(smbox->shmem)) { + if (cl->knows_txdone && + !core->shmem->channel_free(smbox->shmem)) { dev_warn(smbox->cinfo->dev, "Ignoring spurious A2P IRQ !\n"); - scmi_bad_message_trace(smbox->cinfo, - shmem_read_header(smbox->shmem), - MSG_MBOX_SPURIOUS); + core->bad_message_trace(smbox->cinfo, + core->shmem->read_header(smbox->shmem), + MSG_MBOX_SPURIOUS); return; } - scmi_rx_callback(smbox->cinfo, shmem_read_header(smbox->shmem), NULL); + core->rx_callback(smbox->cinfo, + core->shmem->read_header(smbox->shmem), NULL); } static bool mailbox_chan_available(struct device_node *of_node, int idx) @@ -124,18 +131,16 @@ static int mailbox_chan_validate(struct device *cdev, int *a2p_rx_chan, /* Bail out if provided shmem descriptors do not refer distinct areas */ if (num_sh > 1) { - struct device_node *np_tx, *np_rx; + struct device_node *np_tx __free(device_node) = + of_parse_phandle(np, "shmem", 0); + struct device_node *np_rx __free(device_node) = + of_parse_phandle(np, "shmem", 1); - np_tx = of_parse_phandle(np, "shmem", 0); - np_rx = of_parse_phandle(np, "shmem", 1); if (!np_tx || !np_rx || np_tx == np_rx) { dev_warn(cdev, "Invalid shmem descriptor for '%s'\n", of_node_full_name(np)); ret = -EINVAL; } - - of_node_put(np_tx); - of_node_put(np_rx); } /* Calculate channels IDs to use depending on mboxes/shmem layout */ @@ -178,11 +183,8 @@ static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, const char *desc = tx ? "Tx" : "Rx"; struct device *cdev = cinfo->dev; struct scmi_mailbox *smbox; - struct device_node *shmem; - int ret, a2p_rx_chan, p2a_chan, p2a_rx_chan, idx = tx ? 0 : 1; + int ret, a2p_rx_chan, p2a_chan, p2a_rx_chan; struct mbox_client *cl; - resource_size_t size; - struct resource res; ret = mailbox_chan_validate(cdev, &a2p_rx_chan, &p2a_chan, &p2a_rx_chan); if (ret) @@ -195,25 +197,9 @@ static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, if (!smbox) return -ENOMEM; - shmem = of_parse_phandle(cdev->of_node, "shmem", idx); - if (!of_device_is_compatible(shmem, "arm,scmi-shmem")) { - of_node_put(shmem); - return -ENXIO; - } - - ret = of_address_to_resource(shmem, 0, &res); - of_node_put(shmem); - if (ret) { - dev_err(cdev, "failed to get SCMI %s shared memory\n", desc); - return ret; - } - - size = resource_size(&res); - smbox->shmem = devm_ioremap(dev, res.start, size); - if (!smbox->shmem) { - dev_err(dev, "failed to ioremap SCMI %s shared memory\n", desc); - return -EADDRNOTAVAIL; - } + smbox->shmem = core->shmem->setup_iomap(cinfo, dev, tx, NULL); + if (IS_ERR(smbox->shmem)) + return PTR_ERR(smbox->shmem); cl = &smbox->cl; cl->dev = cdev; @@ -252,9 +238,9 @@ static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, } } - cinfo->transport_info = smbox; smbox->cinfo = cinfo; + mutex_init(&smbox->chan_lock); return 0; } @@ -284,13 +270,23 @@ static int mailbox_send_message(struct scmi_chan_info *cinfo, struct scmi_mailbox *smbox = cinfo->transport_info; int ret; - ret = mbox_send_message(smbox->chan, xfer); + /* + * The mailbox layer has its own queue. However the mailbox queue + * confuses the per message SCMI timeouts since the clock starts when + * the message is submitted into the mailbox queue. So when multiple + * messages are queued up the clock starts on all messages instead of + * only the one inflight. + */ + mutex_lock(&smbox->chan_lock); - /* mbox_send_message returns non-negative value on success, so reset */ - if (ret > 0) - ret = 0; + ret = mbox_send_message(smbox->chan, xfer); + /* mbox_send_message returns non-negative value on success */ + if (ret < 0) { + mutex_unlock(&smbox->chan_lock); + return ret; + } - return ret; + return 0; } static void mailbox_mark_txdone(struct scmi_chan_info *cinfo, int ret, @@ -298,13 +294,10 @@ static void mailbox_mark_txdone(struct scmi_chan_info *cinfo, int ret, { struct scmi_mailbox *smbox = cinfo->transport_info; - /* - * NOTE: we might prefer not to need the mailbox ticker to manage the - * transfer queueing since the protocol layer queues things by itself. - * Unfortunately, we have to kick the mailbox framework after we have - * received our message. - */ mbox_client_txdone(smbox->chan, ret); + + /* Release channel */ + mutex_unlock(&smbox->chan_lock); } static void mailbox_fetch_response(struct scmi_chan_info *cinfo, @@ -312,7 +305,7 @@ static void mailbox_fetch_response(struct scmi_chan_info *cinfo, { struct scmi_mailbox *smbox = cinfo->transport_info; - shmem_fetch_response(smbox->shmem, xfer); + core->shmem->fetch_response(smbox->shmem, xfer); } static void mailbox_fetch_notification(struct scmi_chan_info *cinfo, @@ -320,7 +313,7 @@ static void mailbox_fetch_notification(struct scmi_chan_info *cinfo, { struct scmi_mailbox *smbox = cinfo->transport_info; - shmem_fetch_notification(smbox->shmem, max_len, xfer); + core->shmem->fetch_notification(smbox->shmem, max_len, xfer); } static void mailbox_clear_channel(struct scmi_chan_info *cinfo) @@ -329,9 +322,9 @@ static void mailbox_clear_channel(struct scmi_chan_info *cinfo) struct mbox_chan *intr_chan; int ret; - shmem_clear_channel(smbox->shmem); + core->shmem->clear_channel(smbox->shmem); - if (!shmem_channel_intr_enabled(smbox->shmem)) + if (!core->shmem->channel_intr_enabled(smbox->shmem)) return; if (smbox->chan_platform_receiver) @@ -354,7 +347,7 @@ mailbox_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer) { struct scmi_mailbox *smbox = cinfo->transport_info; - return shmem_poll_done(smbox->shmem, xfer); + return core->shmem->poll_done(smbox->shmem, xfer); } static const struct scmi_transport_ops scmi_mailbox_ops = { @@ -369,9 +362,22 @@ static const struct scmi_transport_ops scmi_mailbox_ops = { .poll_done = mailbox_poll_done, }; -const struct scmi_desc scmi_mailbox_desc = { +static struct scmi_desc scmi_mailbox_desc = { .ops = &scmi_mailbox_ops, .max_rx_timeout_ms = 30, /* We may increase this if required */ .max_msg = 20, /* Limited by MBOX_TX_QUEUE_LEN */ .max_msg_size = 128, }; + +static const struct of_device_id scmi_of_match[] = { + { .compatible = "arm,scmi" }, + { /* Sentinel */ }, +}; + +DEFINE_SCMI_TRANSPORT_DRIVER(scmi_mailbox, scmi_mailbox_driver, + scmi_mailbox_desc, scmi_of_match, core); +module_platform_driver(scmi_mailbox_driver); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("SCMI Mailbox Transport driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/transports/optee.c index 4e7944b91e38..56fc63edf51e 100644 --- a/drivers/firmware/arm_scmi/optee.c +++ b/drivers/firmware/arm_scmi/transports/optee.c @@ -9,12 +9,13 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/platform_device.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include <linux/uuid.h> #include <uapi/linux/tee.h> -#include "common.h" +#include "../common.h" #define SCMI_OPTEE_MAX_MSG_SIZE 128 @@ -148,12 +149,11 @@ struct scmi_optee_agent { struct list_head channel_list; }; +static struct scmi_transport_core_operations *core; + /* There can be only 1 SCMI service in OP-TEE we connect to */ static struct scmi_optee_agent *scmi_optee_private; -/* Forward reference to scmi_optee transport initialization */ -static int scmi_optee_init(void); - /* Open a session toward SCMI OP-TEE service with REE_KERNEL identity */ static int open_session(struct scmi_optee_agent *agent, u32 *tee_session) { @@ -312,24 +312,6 @@ static int invoke_process_msg_channel(struct scmi_optee_channel *channel, size_t return 0; } -static int scmi_optee_link_supplier(struct device *dev) -{ - if (!scmi_optee_private) { - if (scmi_optee_init()) - dev_dbg(dev, "Optee bus not yet ready\n"); - - /* Wait for optee bus */ - return -EPROBE_DEFER; - } - - if (!device_link_add(dev, scmi_optee_private->dev, DL_FLAG_AUTOREMOVE_CONSUMER)) { - dev_err(dev, "Adding link to supplier optee device failed\n"); - return -ECANCELED; - } - - return 0; -} - static bool scmi_optee_chan_available(struct device_node *of_node, int idx) { u32 channel_id; @@ -343,7 +325,7 @@ static void scmi_optee_clear_channel(struct scmi_chan_info *cinfo) struct scmi_optee_channel *channel = cinfo->transport_info; if (!channel->tee_shm) - shmem_clear_channel(channel->req.shmem); + core->shmem->clear_channel(channel->req.shmem); } static int setup_dynamic_shmem(struct device *dev, struct scmi_optee_channel *channel) @@ -368,38 +350,11 @@ static int setup_dynamic_shmem(struct device *dev, struct scmi_optee_channel *ch static int setup_static_shmem(struct device *dev, struct scmi_chan_info *cinfo, struct scmi_optee_channel *channel) { - struct device_node *np; - resource_size_t size; - struct resource res; - int ret; + channel->req.shmem = core->shmem->setup_iomap(cinfo, dev, true, NULL); + if (IS_ERR(channel->req.shmem)) + return PTR_ERR(channel->req.shmem); - np = of_parse_phandle(cinfo->dev->of_node, "shmem", 0); - if (!of_device_is_compatible(np, "arm,scmi-shmem")) { - ret = -ENXIO; - goto out; - } - - ret = of_address_to_resource(np, 0, &res); - if (ret) { - dev_err(dev, "Failed to get SCMI Tx shared memory\n"); - goto out; - } - - size = resource_size(&res); - - channel->req.shmem = devm_ioremap(dev, res.start, size); - if (!channel->req.shmem) { - dev_err(dev, "Failed to ioremap SCMI Tx shared memory\n"); - ret = -EADDRNOTAVAIL; - goto out; - } - - ret = 0; - -out: - of_node_put(np); - - return ret; + return 0; } static int setup_shmem(struct device *dev, struct scmi_chan_info *cinfo, @@ -473,6 +428,13 @@ static int scmi_optee_chan_free(int id, void *p, void *data) struct scmi_chan_info *cinfo = p; struct scmi_optee_channel *channel = cinfo->transport_info; + /* + * Different protocols might share the same chan info, so a previous + * call might have already freed the structure. + */ + if (!channel) + return 0; + mutex_lock(&scmi_optee_private->mu); list_del(&channel->link); mutex_unlock(&scmi_optee_private->mu); @@ -499,10 +461,11 @@ static int scmi_optee_send_message(struct scmi_chan_info *cinfo, mutex_lock(&channel->mu); if (channel->tee_shm) { - msg_tx_prepare(channel->req.msg, xfer); - ret = invoke_process_msg_channel(channel, msg_command_size(xfer)); + core->msg->tx_prepare(channel->req.msg, xfer); + ret = invoke_process_msg_channel(channel, + core->msg->command_size(xfer)); } else { - shmem_tx_prepare(channel->req.shmem, xfer, cinfo); + core->shmem->tx_prepare(channel->req.shmem, xfer, cinfo); ret = invoke_process_smt_channel(channel); } @@ -518,9 +481,10 @@ static void scmi_optee_fetch_response(struct scmi_chan_info *cinfo, struct scmi_optee_channel *channel = cinfo->transport_info; if (channel->tee_shm) - msg_fetch_response(channel->req.msg, channel->rx_len, xfer); + core->msg->fetch_response(channel->req.msg, + channel->rx_len, xfer); else - shmem_fetch_response(channel->req.shmem, xfer); + core->shmem->fetch_response(channel->req.shmem, xfer); } static void scmi_optee_mark_txdone(struct scmi_chan_info *cinfo, int ret, @@ -532,7 +496,6 @@ static void scmi_optee_mark_txdone(struct scmi_chan_info *cinfo, int ret, } static struct scmi_transport_ops scmi_optee_ops = { - .link_supplier = scmi_optee_link_supplier, .chan_available = scmi_optee_chan_available, .chan_setup = scmi_optee_chan_setup, .chan_free = scmi_optee_chan_free, @@ -547,6 +510,22 @@ static int scmi_optee_ctx_match(struct tee_ioctl_version_data *ver, const void * return ver->impl_id == TEE_IMPL_ID_OPTEE; } +static struct scmi_desc scmi_optee_desc = { + .ops = &scmi_optee_ops, + .max_rx_timeout_ms = 30, + .max_msg = 20, + .max_msg_size = SCMI_OPTEE_MAX_MSG_SIZE, + .sync_cmds_completed_on_ret = true, +}; + +static const struct of_device_id scmi_of_match[] = { + { .compatible = "linaro,scmi-optee" }, + { /* Sentinel */ }, +}; + +DEFINE_SCMI_TRANSPORT_DRIVER(scmi_optee, scmi_optee_driver, scmi_optee_desc, + scmi_of_match, core); + static int scmi_optee_service_probe(struct device *dev) { struct scmi_optee_agent *agent; @@ -582,6 +561,12 @@ static int scmi_optee_service_probe(struct device *dev) smp_mb(); scmi_optee_private = agent; + ret = platform_driver_register(&scmi_optee_driver); + if (ret) { + scmi_optee_private = NULL; + goto err; + } + return 0; err: @@ -597,6 +582,8 @@ static int scmi_optee_service_remove(struct device *dev) if (!scmi_optee_private) return -EINVAL; + platform_driver_unregister(&scmi_optee_driver); + if (!list_empty(&scmi_optee_private->channel_list)) return -EBUSY; @@ -618,7 +605,7 @@ static const struct tee_client_device_id scmi_optee_service_id[] = { MODULE_DEVICE_TABLE(tee, scmi_optee_service_id); -static struct tee_client_driver scmi_optee_driver = { +static struct tee_client_driver scmi_optee_service_driver = { .id_table = scmi_optee_service_id, .driver = { .name = "scmi-optee", @@ -628,22 +615,18 @@ static struct tee_client_driver scmi_optee_driver = { }, }; -static int scmi_optee_init(void) +static int __init scmi_transport_optee_init(void) { - return driver_register(&scmi_optee_driver.driver); + return driver_register(&scmi_optee_service_driver.driver); } +module_init(scmi_transport_optee_init); -static void scmi_optee_exit(void) +static void __exit scmi_transport_optee_exit(void) { - if (scmi_optee_private) - driver_unregister(&scmi_optee_driver.driver); + driver_unregister(&scmi_optee_service_driver.driver); } +module_exit(scmi_transport_optee_exit); -const struct scmi_desc scmi_optee_desc = { - .transport_exit = scmi_optee_exit, - .ops = &scmi_optee_ops, - .max_rx_timeout_ms = 30, - .max_msg = 20, - .max_msg_size = SCMI_OPTEE_MAX_MSG_SIZE, - .sync_cmds_completed_on_ret = true, -}; +MODULE_AUTHOR("Etienne Carriere <etienne.carriere@foss.st.com>"); +MODULE_DESCRIPTION("SCMI OPTEE Transport driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/transports/smc.c index 39936e1dd30e..f8dd108777f9 100644 --- a/drivers/firmware/arm_scmi/smc.c +++ b/drivers/firmware/arm_scmi/transports/smc.c @@ -16,10 +16,11 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/limits.h> +#include <linux/platform_device.h> #include <linux/processor.h> #include <linux/slab.h> -#include "common.h" +#include "../common.h" /* * The shmem address is split into 4K page and offset. @@ -69,23 +70,25 @@ struct scmi_smc { unsigned long cap_id; }; +static struct scmi_transport_core_operations *core; + static irqreturn_t smc_msg_done_isr(int irq, void *data) { struct scmi_smc *scmi_info = data; - scmi_rx_callback(scmi_info->cinfo, - shmem_read_header(scmi_info->shmem), NULL); + core->rx_callback(scmi_info->cinfo, + core->shmem->read_header(scmi_info->shmem), NULL); return IRQ_HANDLED; } static bool smc_chan_available(struct device_node *of_node, int idx) { - struct device_node *np = of_parse_phandle(of_node, "shmem", 0); + struct device_node *np __free(device_node) = + of_parse_phandle(of_node, "shmem", 0); if (!np) return false; - of_node_put(np); return true; } @@ -130,9 +133,7 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, struct device *cdev = cinfo->dev; unsigned long cap_id = ULONG_MAX; struct scmi_smc *scmi_info; - resource_size_t size; - struct resource res; - struct device_node *np; + struct resource res = {}; u32 func_id; int ret; @@ -143,31 +144,16 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, if (!scmi_info) return -ENOMEM; - np = of_parse_phandle(cdev->of_node, "shmem", 0); - if (!of_device_is_compatible(np, "arm,scmi-shmem")) { - of_node_put(np); - return -ENXIO; - } - - ret = of_address_to_resource(np, 0, &res); - of_node_put(np); - if (ret) { - dev_err(cdev, "failed to get SCMI Tx shared memory\n"); - return ret; - } - - size = resource_size(&res); - scmi_info->shmem = devm_ioremap(dev, res.start, size); - if (!scmi_info->shmem) { - dev_err(dev, "failed to ioremap SCMI Tx shared memory\n"); - return -EADDRNOTAVAIL; - } + scmi_info->shmem = core->shmem->setup_iomap(cinfo, dev, tx, &res); + if (IS_ERR(scmi_info->shmem)) + return PTR_ERR(scmi_info->shmem); ret = of_property_read_u32(dev->of_node, "arm,smc-id", &func_id); if (ret < 0) return ret; if (of_device_is_compatible(dev->of_node, "qcom,scmi-smc")) { + resource_size_t size = resource_size(&res); void __iomem *ptr = (void __iomem *)scmi_info->shmem + size - 8; /* The capability-id is kept in last 8 bytes of shmem. * +-------+ <-- 0 @@ -243,7 +229,7 @@ static int smc_send_message(struct scmi_chan_info *cinfo, */ smc_channel_lock_acquire(scmi_info, xfer); - shmem_tx_prepare(scmi_info->shmem, xfer, cinfo); + core->shmem->tx_prepare(scmi_info->shmem, xfer, cinfo); if (scmi_info->cap_id != ULONG_MAX) arm_smccc_1_1_invoke(scmi_info->func_id, scmi_info->cap_id, 0, @@ -267,7 +253,7 @@ static void smc_fetch_response(struct scmi_chan_info *cinfo, { struct scmi_smc *scmi_info = cinfo->transport_info; - shmem_fetch_response(scmi_info->shmem, xfer); + core->shmem->fetch_response(scmi_info->shmem, xfer); } static void smc_mark_txdone(struct scmi_chan_info *cinfo, int ret, @@ -287,7 +273,7 @@ static const struct scmi_transport_ops scmi_smc_ops = { .fetch_response = smc_fetch_response, }; -const struct scmi_desc scmi_smc_desc = { +static struct scmi_desc scmi_smc_desc = { .ops = &scmi_smc_ops, .max_rx_timeout_ms = 30, .max_msg = 20, @@ -303,3 +289,19 @@ const struct scmi_desc scmi_smc_desc = { .sync_cmds_completed_on_ret = true, .atomic_enabled = IS_ENABLED(CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE), }; + +static const struct of_device_id scmi_of_match[] = { + { .compatible = "arm,scmi-smc" }, + { .compatible = "arm,scmi-smc-param" }, + { .compatible = "qcom,scmi-smc" }, + { /* Sentinel */ }, +}; + +DEFINE_SCMI_TRANSPORT_DRIVER(scmi_smc, scmi_smc_driver, scmi_smc_desc, + scmi_of_match, core); +module_platform_driver(scmi_smc_driver); + +MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>"); +MODULE_AUTHOR("Nikunj Kela <quic_nkela@quicinc.com>"); +MODULE_DESCRIPTION("SCMI SMC Transport driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/transports/virtio.c index dd3459bdb9cb..d349766bc0b2 100644 --- a/drivers/firmware/arm_scmi/virtio.c +++ b/drivers/firmware/arm_scmi/transports/virtio.c @@ -4,7 +4,7 @@ * (SCMI). * * Copyright (C) 2020-2022 OpenSynergy. - * Copyright (C) 2021-2022 ARM Ltd. + * Copyright (C) 2021-2024 ARM Ltd. */ /** @@ -19,6 +19,7 @@ #include <linux/completion.h> #include <linux/errno.h> +#include <linux/platform_device.h> #include <linux/refcount.h> #include <linux/slab.h> #include <linux/virtio.h> @@ -27,7 +28,7 @@ #include <uapi/linux/virtio_ids.h> #include <uapi/linux/virtio_scmi.h> -#include "common.h" +#include "../common.h" #define VIRTIO_MAX_RX_TIMEOUT_MS 60000 #define VIRTIO_SCMI_MAX_MSG_SIZE 128 /* Value may be increased. */ @@ -108,6 +109,8 @@ struct scmi_vio_msg { refcount_t users; }; +static struct scmi_transport_core_operations *core; + /* Only one SCMI VirtIO device can possibly exist */ static struct virtio_device *scmi_vdev; @@ -294,8 +297,9 @@ static void scmi_vio_complete_cb(struct virtqueue *vqueue) if (msg) { msg->rx_len = length; - scmi_rx_callback(vioch->cinfo, - msg_read_header(msg->input), msg); + core->rx_callback(vioch->cinfo, + core->msg->read_header(msg->input), + msg); scmi_finalize_message(vioch, msg); } @@ -339,8 +343,9 @@ static void scmi_vio_deferred_tx_worker(struct work_struct *work) * is no more processed elsewhere so no poll_lock needed. */ if (msg->poll_status == VIO_MSG_NOT_POLLED) - scmi_rx_callback(vioch->cinfo, - msg_read_header(msg->input), msg); + core->rx_callback(vioch->cinfo, + core->msg->read_header(msg->input), + msg); /* Free the processed message once done */ scmi_vio_msg_release(vioch, msg); @@ -366,23 +371,6 @@ static unsigned int virtio_get_max_msg(struct scmi_chan_info *base_cinfo) return vioch->max_msg; } -static int virtio_link_supplier(struct device *dev) -{ - if (!scmi_vdev) { - dev_notice(dev, - "Deferring probe after not finding a bound scmi-virtio device\n"); - return -EPROBE_DEFER; - } - - if (!device_link_add(dev, &scmi_vdev->dev, - DL_FLAG_AUTOREMOVE_CONSUMER)) { - dev_err(dev, "Adding link to supplier virtio device failed\n"); - return -ECANCELED; - } - - return 0; -} - static bool virtio_chan_available(struct device_node *of_node, int idx) { struct scmi_vio_channel *channels, *vioch = NULL; @@ -510,10 +498,10 @@ static int virtio_send_message(struct scmi_chan_info *cinfo, return -EBUSY; } - msg_tx_prepare(msg->request, xfer); + core->msg->tx_prepare(msg->request, xfer); - sg_init_one(&sg_out, msg->request, msg_command_size(xfer)); - sg_init_one(&sg_in, msg->input, msg_response_size(xfer)); + sg_init_one(&sg_out, msg->request, core->msg->command_size(xfer)); + sg_init_one(&sg_in, msg->input, core->msg->response_size(xfer)); spin_lock_irqsave(&vioch->lock, flags); @@ -560,7 +548,7 @@ static void virtio_fetch_response(struct scmi_chan_info *cinfo, struct scmi_vio_msg *msg = xfer->priv; if (msg) - msg_fetch_response(msg->input, msg->rx_len, xfer); + core->msg->fetch_response(msg->input, msg->rx_len, xfer); } static void virtio_fetch_notification(struct scmi_chan_info *cinfo, @@ -569,7 +557,8 @@ static void virtio_fetch_notification(struct scmi_chan_info *cinfo, struct scmi_vio_msg *msg = xfer->priv; if (msg) - msg_fetch_notification(msg->input, msg->rx_len, max_len, xfer); + core->msg->fetch_notification(msg->input, msg->rx_len, + max_len, xfer); } /** @@ -669,7 +658,7 @@ static void virtio_mark_txdone(struct scmi_chan_info *cinfo, int ret, * the message we are polling for could be alternatively delivered via usual * IRQs callbacks on another core which happened to have IRQs enabled while we * are actively polling for it here: in such a case it will be handled as such - * by scmi_rx_callback() and the polling loop in the SCMI Core TX path will be + * by rx_callback() and the polling loop in the SCMI Core TX path will be * transparently terminated anyway. * * Return: True once polling has successfully completed. @@ -790,7 +779,6 @@ static bool virtio_poll_done(struct scmi_chan_info *cinfo, } static const struct scmi_transport_ops scmi_virtio_ops = { - .link_supplier = virtio_link_supplier, .chan_available = virtio_chan_available, .chan_setup = virtio_chan_setup, .chan_free = virtio_chan_free, @@ -802,6 +790,23 @@ static const struct scmi_transport_ops scmi_virtio_ops = { .poll_done = virtio_poll_done, }; +static struct scmi_desc scmi_virtio_desc = { + .ops = &scmi_virtio_ops, + /* for non-realtime virtio devices */ + .max_rx_timeout_ms = VIRTIO_MAX_RX_TIMEOUT_MS, + .max_msg = 0, /* overridden by virtio_get_max_msg() */ + .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE, + .atomic_enabled = IS_ENABLED(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE), +}; + +static const struct of_device_id scmi_of_match[] = { + { .compatible = "arm,scmi-virtio" }, + { /* Sentinel */ }, +}; + +DEFINE_SCMI_TRANSPORT_DRIVER(scmi_virtio, scmi_virtio_driver, scmi_virtio_desc, + scmi_of_match, core); + static int scmi_vio_probe(struct virtio_device *vdev) { struct device *dev = &vdev->dev; @@ -861,14 +866,27 @@ static int scmi_vio_probe(struct virtio_device *vdev) } vdev->priv = channels; + /* Ensure initialized scmi_vdev is visible */ smp_store_mb(scmi_vdev, vdev); + ret = platform_driver_register(&scmi_virtio_driver); + if (ret) { + vdev->priv = NULL; + vdev->config->del_vqs(vdev); + /* Ensure NULLified scmi_vdev is visible */ + smp_store_mb(scmi_vdev, NULL); + + return ret; + } + return 0; } static void scmi_vio_remove(struct virtio_device *vdev) { + platform_driver_unregister(&scmi_virtio_driver); + /* * Once we get here, virtio_chan_free() will have already been called by * the SCMI core for any existing channel and, as a consequence, all the @@ -913,23 +931,10 @@ static struct virtio_driver virtio_scmi_driver = { .validate = scmi_vio_validate, }; -static int __init virtio_scmi_init(void) -{ - return register_virtio_driver(&virtio_scmi_driver); -} - -static void virtio_scmi_exit(void) -{ - unregister_virtio_driver(&virtio_scmi_driver); -} +module_virtio_driver(virtio_scmi_driver); -const struct scmi_desc scmi_virtio_desc = { - .transport_init = virtio_scmi_init, - .transport_exit = virtio_scmi_exit, - .ops = &scmi_virtio_ops, - /* for non-realtime virtio devices */ - .max_rx_timeout_ms = VIRTIO_MAX_RX_TIMEOUT_MS, - .max_msg = 0, /* overridden by virtio_get_max_msg() */ - .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE, - .atomic_enabled = IS_ENABLED(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE), -}; +MODULE_AUTHOR("Igor Skalkin <igor.skalkin@opensynergy.com>"); +MODULE_AUTHOR("Peter Hilber <peter.hilber@opensynergy.com>"); +MODULE_AUTHOR("Cristian Marussi <cristian.marussi@arm.com>"); +MODULE_DESCRIPTION("SCMI VirtIO Transport driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/arm_scmi/vendors/imx/Kconfig b/drivers/firmware/arm_scmi/vendors/imx/Kconfig new file mode 100644 index 000000000000..2883ed24a84d --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/imx/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "ARM SCMI NXP i.MX Vendor Protocols" + +config IMX_SCMI_BBM_EXT + tristate "i.MX SCMI BBM EXTENSION" + depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) + default y if ARCH_MXC + help + This enables i.MX System BBM control logic which supports RTC + and BUTTON. + + To compile this driver as a module, choose M here: the + module will be called imx-sm-bbm. + +config IMX_SCMI_MISC_EXT + tristate "i.MX SCMI MISC EXTENSION" + depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) + default y if ARCH_MXC + help + This enables i.MX System MISC control logic such as gpio expander + wakeup + + To compile this driver as a module, choose M here: the + module will be called imx-sm-misc. +endmenu diff --git a/drivers/firmware/arm_scmi/vendors/imx/Makefile b/drivers/firmware/arm_scmi/vendors/imx/Makefile new file mode 100644 index 000000000000..d3ee6d544924 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/imx/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_IMX_SCMI_BBM_EXT) += imx-sm-bbm.o +obj-$(CONFIG_IMX_SCMI_MISC_EXT) += imx-sm-misc.o diff --git a/drivers/firmware/arm_scmi/vendors/imx/imx-sm-bbm.c b/drivers/firmware/arm_scmi/vendors/imx/imx-sm-bbm.c new file mode 100644 index 000000000000..17799eacf06c --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/imx/imx-sm-bbm.c @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * System Control and Management Interface (SCMI) NXP BBM Protocol + * + * Copyright 2024 NXP + */ + +#define pr_fmt(fmt) "SCMI Notifications BBM - " fmt + +#include <linux/bits.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/scmi_protocol.h> +#include <linux/scmi_imx_protocol.h> + +#include "../../protocols.h" +#include "../../notify.h" + +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x10000 + +enum scmi_imx_bbm_protocol_cmd { + IMX_BBM_GPR_SET = 0x3, + IMX_BBM_GPR_GET = 0x4, + IMX_BBM_RTC_ATTRIBUTES = 0x5, + IMX_BBM_RTC_TIME_SET = 0x6, + IMX_BBM_RTC_TIME_GET = 0x7, + IMX_BBM_RTC_ALARM_SET = 0x8, + IMX_BBM_BUTTON_GET = 0x9, + IMX_BBM_RTC_NOTIFY = 0xA, + IMX_BBM_BUTTON_NOTIFY = 0xB, +}; + +#define GET_RTCS_NR(x) le32_get_bits((x), GENMASK(23, 16)) +#define GET_GPRS_NR(x) le32_get_bits((x), GENMASK(15, 0)) + +#define SCMI_IMX_BBM_NOTIFY_RTC_UPDATED BIT(2) +#define SCMI_IMX_BBM_NOTIFY_RTC_ROLLOVER BIT(1) +#define SCMI_IMX_BBM_NOTIFY_RTC_ALARM BIT(0) + +#define SCMI_IMX_BBM_RTC_ALARM_ENABLE_FLAG BIT(0) + +#define SCMI_IMX_BBM_NOTIFY_RTC_FLAG \ + (SCMI_IMX_BBM_NOTIFY_RTC_UPDATED | SCMI_IMX_BBM_NOTIFY_RTC_ROLLOVER | \ + SCMI_IMX_BBM_NOTIFY_RTC_ALARM) + +#define SCMI_IMX_BBM_EVENT_RTC_MASK GENMASK(31, 24) + +struct scmi_imx_bbm_info { + u32 version; + int nr_rtc; + int nr_gpr; +}; + +struct scmi_msg_imx_bbm_protocol_attributes { + __le32 attributes; +}; + +struct scmi_imx_bbm_set_time { + __le32 id; + __le32 flags; + __le32 value_low; + __le32 value_high; +}; + +struct scmi_imx_bbm_get_time { + __le32 id; + __le32 flags; +}; + +struct scmi_imx_bbm_alarm_time { + __le32 id; + __le32 flags; + __le32 value_low; + __le32 value_high; +}; + +struct scmi_msg_imx_bbm_rtc_notify { + __le32 rtc_id; + __le32 flags; +}; + +struct scmi_msg_imx_bbm_button_notify { + __le32 flags; +}; + +struct scmi_imx_bbm_notify_payld { + __le32 flags; +}; + +static int scmi_imx_bbm_attributes_get(const struct scmi_protocol_handle *ph, + struct scmi_imx_bbm_info *pi) +{ + int ret; + struct scmi_xfer *t; + struct scmi_msg_imx_bbm_protocol_attributes *attr; + + ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES, 0, sizeof(*attr), &t); + if (ret) + return ret; + + attr = t->rx.buf; + + ret = ph->xops->do_xfer(ph, t); + if (!ret) { + pi->nr_rtc = GET_RTCS_NR(attr->attributes); + pi->nr_gpr = GET_GPRS_NR(attr->attributes); + } + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int scmi_imx_bbm_notify(const struct scmi_protocol_handle *ph, + u32 src_id, int message_id, bool enable) +{ + int ret; + struct scmi_xfer *t; + + if (message_id == IMX_BBM_RTC_NOTIFY) { + struct scmi_msg_imx_bbm_rtc_notify *rtc_notify; + + ret = ph->xops->xfer_get_init(ph, message_id, + sizeof(*rtc_notify), 0, &t); + if (ret) + return ret; + + rtc_notify = t->tx.buf; + rtc_notify->rtc_id = cpu_to_le32(0); + rtc_notify->flags = + cpu_to_le32(enable ? SCMI_IMX_BBM_NOTIFY_RTC_FLAG : 0); + } else if (message_id == IMX_BBM_BUTTON_NOTIFY) { + struct scmi_msg_imx_bbm_button_notify *button_notify; + + ret = ph->xops->xfer_get_init(ph, message_id, + sizeof(*button_notify), 0, &t); + if (ret) + return ret; + + button_notify = t->tx.buf; + button_notify->flags = cpu_to_le32(enable ? 1 : 0); + } else { + return -EINVAL; + } + + ret = ph->xops->do_xfer(ph, t); + + ph->xops->xfer_put(ph, t); + return ret; +} + +static enum scmi_imx_bbm_protocol_cmd evt_2_cmd[] = { + IMX_BBM_RTC_NOTIFY, + IMX_BBM_BUTTON_NOTIFY +}; + +static int scmi_imx_bbm_set_notify_enabled(const struct scmi_protocol_handle *ph, + u8 evt_id, u32 src_id, bool enable) +{ + int ret, cmd_id; + + if (evt_id >= ARRAY_SIZE(evt_2_cmd)) + return -EINVAL; + + cmd_id = evt_2_cmd[evt_id]; + ret = scmi_imx_bbm_notify(ph, src_id, cmd_id, enable); + if (ret) + pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n", + evt_id, src_id, ret); + + return ret; +} + +static void *scmi_imx_bbm_fill_custom_report(const struct scmi_protocol_handle *ph, + u8 evt_id, ktime_t timestamp, + const void *payld, size_t payld_sz, + void *report, u32 *src_id) +{ + const struct scmi_imx_bbm_notify_payld *p = payld; + struct scmi_imx_bbm_notif_report *r = report; + + if (sizeof(*p) != payld_sz) + return NULL; + + if (evt_id == SCMI_EVENT_IMX_BBM_RTC) { + r->is_rtc = true; + r->is_button = false; + r->timestamp = timestamp; + r->rtc_id = le32_get_bits(p->flags, SCMI_IMX_BBM_EVENT_RTC_MASK); + r->rtc_evt = le32_get_bits(p->flags, SCMI_IMX_BBM_NOTIFY_RTC_FLAG); + dev_dbg(ph->dev, "RTC: %d evt: %x\n", r->rtc_id, r->rtc_evt); + *src_id = r->rtc_evt; + } else if (evt_id == SCMI_EVENT_IMX_BBM_BUTTON) { + r->is_rtc = false; + r->is_button = true; + r->timestamp = timestamp; + dev_dbg(ph->dev, "BBM Button\n"); + *src_id = 0; + } else { + WARN_ON_ONCE(1); + return NULL; + } + + return r; +} + +static const struct scmi_event scmi_imx_bbm_events[] = { + { + .id = SCMI_EVENT_IMX_BBM_RTC, + .max_payld_sz = sizeof(struct scmi_imx_bbm_notify_payld), + .max_report_sz = sizeof(struct scmi_imx_bbm_notif_report), + }, + { + .id = SCMI_EVENT_IMX_BBM_BUTTON, + .max_payld_sz = sizeof(struct scmi_imx_bbm_notify_payld), + .max_report_sz = sizeof(struct scmi_imx_bbm_notif_report), + }, +}; + +static const struct scmi_event_ops scmi_imx_bbm_event_ops = { + .set_notify_enabled = scmi_imx_bbm_set_notify_enabled, + .fill_custom_report = scmi_imx_bbm_fill_custom_report, +}; + +static const struct scmi_protocol_events scmi_imx_bbm_protocol_events = { + .queue_sz = SCMI_PROTO_QUEUE_SZ, + .ops = &scmi_imx_bbm_event_ops, + .evts = scmi_imx_bbm_events, + .num_events = ARRAY_SIZE(scmi_imx_bbm_events), + .num_sources = 1, +}; + +static int scmi_imx_bbm_rtc_time_set(const struct scmi_protocol_handle *ph, + u32 rtc_id, u64 sec) +{ + struct scmi_imx_bbm_info *pi = ph->get_priv(ph); + struct scmi_imx_bbm_set_time *cfg; + struct scmi_xfer *t; + int ret; + + if (rtc_id >= pi->nr_rtc) + return -EINVAL; + + ret = ph->xops->xfer_get_init(ph, IMX_BBM_RTC_TIME_SET, sizeof(*cfg), 0, &t); + if (ret) + return ret; + + cfg = t->tx.buf; + cfg->id = cpu_to_le32(rtc_id); + cfg->flags = 0; + cfg->value_low = cpu_to_le32(lower_32_bits(sec)); + cfg->value_high = cpu_to_le32(upper_32_bits(sec)); + + ret = ph->xops->do_xfer(ph, t); + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int scmi_imx_bbm_rtc_time_get(const struct scmi_protocol_handle *ph, + u32 rtc_id, u64 *value) +{ + struct scmi_imx_bbm_info *pi = ph->get_priv(ph); + struct scmi_imx_bbm_get_time *cfg; + struct scmi_xfer *t; + int ret; + + if (rtc_id >= pi->nr_rtc) + return -EINVAL; + + ret = ph->xops->xfer_get_init(ph, IMX_BBM_RTC_TIME_GET, sizeof(*cfg), + sizeof(u64), &t); + if (ret) + return ret; + + cfg = t->tx.buf; + cfg->id = cpu_to_le32(rtc_id); + cfg->flags = 0; + + ret = ph->xops->do_xfer(ph, t); + if (!ret) + *value = get_unaligned_le64(t->rx.buf); + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int scmi_imx_bbm_rtc_alarm_set(const struct scmi_protocol_handle *ph, + u32 rtc_id, bool enable, u64 sec) +{ + struct scmi_imx_bbm_info *pi = ph->get_priv(ph); + struct scmi_imx_bbm_alarm_time *cfg; + struct scmi_xfer *t; + int ret; + + if (rtc_id >= pi->nr_rtc) + return -EINVAL; + + ret = ph->xops->xfer_get_init(ph, IMX_BBM_RTC_ALARM_SET, sizeof(*cfg), 0, &t); + if (ret) + return ret; + + cfg = t->tx.buf; + cfg->id = cpu_to_le32(rtc_id); + cfg->flags = enable ? + cpu_to_le32(SCMI_IMX_BBM_RTC_ALARM_ENABLE_FLAG) : 0; + cfg->value_low = cpu_to_le32(lower_32_bits(sec)); + cfg->value_high = cpu_to_le32(upper_32_bits(sec)); + + ret = ph->xops->do_xfer(ph, t); + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int scmi_imx_bbm_button_get(const struct scmi_protocol_handle *ph, u32 *state) +{ + struct scmi_xfer *t; + int ret; + + ret = ph->xops->xfer_get_init(ph, IMX_BBM_BUTTON_GET, 0, sizeof(u32), &t); + if (ret) + return ret; + + ret = ph->xops->do_xfer(ph, t); + if (!ret) + *state = get_unaligned_le32(t->rx.buf); + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static const struct scmi_imx_bbm_proto_ops scmi_imx_bbm_proto_ops = { + .rtc_time_get = scmi_imx_bbm_rtc_time_get, + .rtc_time_set = scmi_imx_bbm_rtc_time_set, + .rtc_alarm_set = scmi_imx_bbm_rtc_alarm_set, + .button_get = scmi_imx_bbm_button_get, +}; + +static int scmi_imx_bbm_protocol_init(const struct scmi_protocol_handle *ph) +{ + u32 version; + int ret; + struct scmi_imx_bbm_info *binfo; + + ret = ph->xops->version_get(ph, &version); + if (ret) + return ret; + + dev_info(ph->dev, "NXP SM BBM Version %d.%d\n", + PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); + + binfo = devm_kzalloc(ph->dev, sizeof(*binfo), GFP_KERNEL); + if (!binfo) + return -ENOMEM; + + ret = scmi_imx_bbm_attributes_get(ph, binfo); + if (ret) + return ret; + + return ph->set_priv(ph, binfo, version); +} + +static const struct scmi_protocol scmi_imx_bbm = { + .id = SCMI_PROTOCOL_IMX_BBM, + .owner = THIS_MODULE, + .instance_init = &scmi_imx_bbm_protocol_init, + .ops = &scmi_imx_bbm_proto_ops, + .events = &scmi_imx_bbm_protocol_events, + .supported_version = SCMI_PROTOCOL_SUPPORTED_VERSION, + .vendor_id = "NXP", + .sub_vendor_id = "IMX", +}; +module_scmi_protocol(scmi_imx_bbm); + +MODULE_DESCRIPTION("i.MX SCMI BBM driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c b/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c new file mode 100644 index 000000000000..a86ab9b35953 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * System control and Management Interface (SCMI) NXP MISC Protocol + * + * Copyright 2024 NXP + */ + +#define pr_fmt(fmt) "SCMI Notifications MISC - " fmt + +#include <linux/bits.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/scmi_protocol.h> +#include <linux/scmi_imx_protocol.h> + +#include "../../protocols.h" +#include "../../notify.h" + +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x10000 + +#define MAX_MISC_CTRL_SOURCES GENMASK(15, 0) + +enum scmi_imx_misc_protocol_cmd { + SCMI_IMX_MISC_CTRL_SET = 0x3, + SCMI_IMX_MISC_CTRL_GET = 0x4, + SCMI_IMX_MISC_CTRL_NOTIFY = 0x8, +}; + +struct scmi_imx_misc_info { + u32 version; + u32 nr_dev_ctrl; + u32 nr_brd_ctrl; + u32 nr_reason; +}; + +struct scmi_msg_imx_misc_protocol_attributes { + __le32 attributes; +}; + +#define GET_BRD_CTRLS_NR(x) le32_get_bits((x), GENMASK(31, 24)) +#define GET_REASONS_NR(x) le32_get_bits((x), GENMASK(23, 16)) +#define GET_DEV_CTRLS_NR(x) le32_get_bits((x), GENMASK(15, 0)) +#define BRD_CTRL_START_ID BIT(15) + +struct scmi_imx_misc_ctrl_set_in { + __le32 id; + __le32 num; + __le32 value[]; +}; + +struct scmi_imx_misc_ctrl_notify_in { + __le32 ctrl_id; + __le32 flags; +}; + +struct scmi_imx_misc_ctrl_notify_payld { + __le32 ctrl_id; + __le32 flags; +}; + +struct scmi_imx_misc_ctrl_get_out { + __le32 num; + __le32 val[]; +}; + +static int scmi_imx_misc_attributes_get(const struct scmi_protocol_handle *ph, + struct scmi_imx_misc_info *mi) +{ + int ret; + struct scmi_xfer *t; + struct scmi_msg_imx_misc_protocol_attributes *attr; + + ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES, 0, + sizeof(*attr), &t); + if (ret) + return ret; + + attr = t->rx.buf; + + ret = ph->xops->do_xfer(ph, t); + if (!ret) { + mi->nr_dev_ctrl = GET_DEV_CTRLS_NR(attr->attributes); + mi->nr_brd_ctrl = GET_BRD_CTRLS_NR(attr->attributes); + mi->nr_reason = GET_REASONS_NR(attr->attributes); + dev_info(ph->dev, "i.MX MISC NUM DEV CTRL: %d, NUM BRD CTRL: %d,NUM Reason: %d\n", + mi->nr_dev_ctrl, mi->nr_brd_ctrl, mi->nr_reason); + } + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int scmi_imx_misc_ctrl_validate_id(const struct scmi_protocol_handle *ph, + u32 ctrl_id) +{ + struct scmi_imx_misc_info *mi = ph->get_priv(ph); + + /* + * [0, BRD_CTRL_START_ID) is for Dev Ctrl which is SOC related + * [BRD_CTRL_START_ID, 0xffff) is for Board Ctrl which is board related + */ + if (ctrl_id < BRD_CTRL_START_ID && ctrl_id > mi->nr_dev_ctrl) + return -EINVAL; + if (ctrl_id >= BRD_CTRL_START_ID + mi->nr_brd_ctrl) + return -EINVAL; + + return 0; +} + +static int scmi_imx_misc_ctrl_notify(const struct scmi_protocol_handle *ph, + u32 ctrl_id, u32 evt_id, u32 flags) +{ + struct scmi_imx_misc_ctrl_notify_in *in; + struct scmi_xfer *t; + int ret; + + ret = scmi_imx_misc_ctrl_validate_id(ph, ctrl_id); + if (ret) + return ret; + + ret = ph->xops->xfer_get_init(ph, SCMI_IMX_MISC_CTRL_NOTIFY, + sizeof(*in), 0, &t); + if (ret) + return ret; + + in = t->tx.buf; + in->ctrl_id = cpu_to_le32(ctrl_id); + in->flags = cpu_to_le32(flags); + + ret = ph->xops->do_xfer(ph, t); + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int +scmi_imx_misc_ctrl_set_notify_enabled(const struct scmi_protocol_handle *ph, + u8 evt_id, u32 src_id, bool enable) +{ + int ret; + + /* misc_ctrl_req_notify is for enablement */ + if (enable) + return 0; + + ret = scmi_imx_misc_ctrl_notify(ph, src_id, evt_id, 0); + if (ret) + dev_err(ph->dev, "FAIL_ENABLED - evt[%X] src[%d] - ret:%d\n", + evt_id, src_id, ret); + + return ret; +} + +static void * +scmi_imx_misc_ctrl_fill_custom_report(const struct scmi_protocol_handle *ph, + u8 evt_id, ktime_t timestamp, + const void *payld, size_t payld_sz, + void *report, u32 *src_id) +{ + const struct scmi_imx_misc_ctrl_notify_payld *p = payld; + struct scmi_imx_misc_ctrl_notify_report *r = report; + + if (sizeof(*p) != payld_sz) + return NULL; + + r->timestamp = timestamp; + r->ctrl_id = le32_to_cpu(p->ctrl_id); + r->flags = le32_to_cpu(p->flags); + if (src_id) + *src_id = r->ctrl_id; + dev_dbg(ph->dev, "%s: ctrl_id: %d flags: %d\n", __func__, + r->ctrl_id, r->flags); + + return r; +} + +static const struct scmi_event_ops scmi_imx_misc_event_ops = { + .set_notify_enabled = scmi_imx_misc_ctrl_set_notify_enabled, + .fill_custom_report = scmi_imx_misc_ctrl_fill_custom_report, +}; + +static const struct scmi_event scmi_imx_misc_events[] = { + { + .id = SCMI_EVENT_IMX_MISC_CONTROL, + .max_payld_sz = sizeof(struct scmi_imx_misc_ctrl_notify_payld), + .max_report_sz = sizeof(struct scmi_imx_misc_ctrl_notify_report), + }, +}; + +static struct scmi_protocol_events scmi_imx_misc_protocol_events = { + .queue_sz = SCMI_PROTO_QUEUE_SZ, + .ops = &scmi_imx_misc_event_ops, + .evts = scmi_imx_misc_events, + .num_events = ARRAY_SIZE(scmi_imx_misc_events), + .num_sources = MAX_MISC_CTRL_SOURCES, +}; + +static int scmi_imx_misc_ctrl_get(const struct scmi_protocol_handle *ph, + u32 ctrl_id, u32 *num, u32 *val) +{ + struct scmi_imx_misc_ctrl_get_out *out; + struct scmi_xfer *t; + int ret, i; + int max_msg_size = ph->hops->get_max_msg_size(ph); + int max_num = (max_msg_size - sizeof(*out)) / sizeof(__le32); + + ret = scmi_imx_misc_ctrl_validate_id(ph, ctrl_id); + if (ret) + return ret; + + ret = ph->xops->xfer_get_init(ph, SCMI_IMX_MISC_CTRL_GET, sizeof(u32), + 0, &t); + if (ret) + return ret; + + put_unaligned_le32(ctrl_id, t->tx.buf); + ret = ph->xops->do_xfer(ph, t); + if (!ret) { + out = t->rx.buf; + *num = le32_to_cpu(out->num); + + if (*num >= max_num || + *num * sizeof(__le32) > t->rx.len - sizeof(__le32)) { + ph->xops->xfer_put(ph, t); + return -EINVAL; + } + + for (i = 0; i < *num; i++) + val[i] = le32_to_cpu(out->val[i]); + } + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int scmi_imx_misc_ctrl_set(const struct scmi_protocol_handle *ph, + u32 ctrl_id, u32 num, u32 *val) +{ + struct scmi_imx_misc_ctrl_set_in *in; + struct scmi_xfer *t; + int ret, i; + int max_msg_size = ph->hops->get_max_msg_size(ph); + int max_num = (max_msg_size - sizeof(*in)) / sizeof(__le32); + + ret = scmi_imx_misc_ctrl_validate_id(ph, ctrl_id); + if (ret) + return ret; + + if (num > max_num) + return -EINVAL; + + ret = ph->xops->xfer_get_init(ph, SCMI_IMX_MISC_CTRL_SET, sizeof(*in), + 0, &t); + if (ret) + return ret; + + in = t->tx.buf; + in->id = cpu_to_le32(ctrl_id); + in->num = cpu_to_le32(num); + for (i = 0; i < num; i++) + in->value[i] = cpu_to_le32(val[i]); + + ret = ph->xops->do_xfer(ph, t); + + ph->xops->xfer_put(ph, t); + + return ret; +} + +static const struct scmi_imx_misc_proto_ops scmi_imx_misc_proto_ops = { + .misc_ctrl_set = scmi_imx_misc_ctrl_set, + .misc_ctrl_get = scmi_imx_misc_ctrl_get, + .misc_ctrl_req_notify = scmi_imx_misc_ctrl_notify, +}; + +static int scmi_imx_misc_protocol_init(const struct scmi_protocol_handle *ph) +{ + struct scmi_imx_misc_info *minfo; + u32 version; + int ret; + + ret = ph->xops->version_get(ph, &version); + if (ret) + return ret; + + dev_info(ph->dev, "NXP SM MISC Version %d.%d\n", + PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); + + minfo = devm_kzalloc(ph->dev, sizeof(*minfo), GFP_KERNEL); + if (!minfo) + return -ENOMEM; + + ret = scmi_imx_misc_attributes_get(ph, minfo); + if (ret) + return ret; + + return ph->set_priv(ph, minfo, version); +} + +static const struct scmi_protocol scmi_imx_misc = { + .id = SCMI_PROTOCOL_IMX_MISC, + .owner = THIS_MODULE, + .instance_init = &scmi_imx_misc_protocol_init, + .ops = &scmi_imx_misc_proto_ops, + .events = &scmi_imx_misc_protocol_events, + .supported_version = SCMI_PROTOCOL_SUPPORTED_VERSION, + .vendor_id = "NXP", + .sub_vendor_id = "IMX", +}; +module_scmi_protocol(scmi_imx_misc); + +MODULE_DESCRIPTION("i.MX SCMI MISC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/arm_scmi/vendors/imx/imx95.rst b/drivers/firmware/arm_scmi/vendors/imx/imx95.rst new file mode 100644 index 000000000000..b2dfd6c46ca2 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/imx/imx95.rst @@ -0,0 +1,886 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +=============================================================================== +i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension +=============================================================================== + +:Copyright: |copy| 2024 NXP + +:Author: Peng Fan <peng.fan@nxp.com> + +The System Manager (SM) is a low-level system function which runs on a System +Control Processor (SCP) to support isolation and management of power domains, +clocks, resets, sensors, pins, etc. on complex application processors. It often +runs on a Cortex-M processor and provides an abstraction to many of the +underlying features of the hardware. The primary purpose of the SM is to allow +isolation between software running on different cores in the SoC. It does this +by having exclusive access to critical resources such as those controlling +power, clocks, reset, PMIC, etc. and then providing an RPC interface to those +clients. This allows the SM to provide access control, arbitration, and +aggregation policies for those shared critical resources. + +SM introduces a concept Logic Machine(LM) which is analogous to VM and each has +its own instance of SCMI. All normal SCMI calls only apply to that LM. That +includes boot, shutdown, reset, suspend, wake, etc. Each LM (e.g. A55 and M7) +are completely isolated from the others and each LM has its own communication +channels talking to the same SCMI server. + +This document covers all the information necessary to understand, maintain, +port, and deploy the SM on supported processors. + +The SM implements an interface compliant with the Arm SCMI Specification +with additional vendor specific extensions. + +SCMI_BBM: System Control and Management BBM Vendor Protocol +============================================================== + +This protocol is intended provide access to the battery-backed module. This +contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol +can also provide access to similar functions implemented via external board +components. The BBM protocol provides functions to: + +- Describe the protocol version. +- Discover implementation attributes. +- Read/write GPR +- Discover the RTCs available in the system. +- Read/write the RTC time in seconds and ticks +- Set an alarm (per LM) in seconds +- Get notifications on RTC update, alarm, or rollover. +- Get notification on ON/OFF button activity. + +For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0. +Board code can add additional GPR and RTC. + +GPR are not aggregated. The RTC time is also not aggregated. Setting these +sets for all so normally exclusive access would be granted to one agent for +each. However, RTC alarms are maintained for each LM and the hardware is +programmed with the next nearest alarm time. So only one agent in an LM should +be given access rights to set an RTC alarm. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes | Bits[31:8] Number of RTCs. | +| | Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_SET +~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to write | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value to write to the GPR | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully written. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to write | +| |the specified GPR | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_GET +~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to read | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully read. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to read | +| |the specified GPR. | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value read from the GPR | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ATTRIBUTES +~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: returned the attributes. | +| |NOT_FOUND: Index is invalid. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Bit[31:24] Bit width of RTC seconds. | +| |Bit[23:16] Bit width of RTC ticks. | +| |Bits[15:0] RTC ticks per second | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the RTC name | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x6 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x7 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully get. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ALARM_SET +~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC enable flag: | +| |Set to 1 if the RTC alarm should be enabled. | +| |Set to 0 if the RTC alarm should be disabled | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds. | +| |Upper word: Upper 32 bits of the time in seconds. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC | +| |alarm | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_GET +~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the button status was read. | +| |Other value: ARM SCMI Specification status code definitions| ++------------------+-----------------------------------------------------------+ +|uint32 state |State of the ON/OFF button. 1: ON, 0: OFF | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_NOTIFY +~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:3] Reserved, must be zero. | +| |Bit[2] Update enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[1] Rollover enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[0] Alarm enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |DENIED: the agent does not have permission to request RTC | +| |notifications. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_NOTIFY +~~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Enable button: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |DENIED: the agent does not have permission to request | +| |button notifications. | ++------------------+-----------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x81 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +BBM_RTC_EVENT +~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | +| |Bits[31:2] Reserved, must be zero. | +| |Bit[1] RTC rollover notification: | +| |1 RTC rollover detected. | +| |0 no RTC rollover detected. | +| |Bit[0] RTC alarm notification: | +| |1 RTC alarm generated. | +| |0 no RTC alarm generated. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_EVENT +~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | ++------------------+-----------------------------------------------------------+ +| |Button events: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Button notification: | +| |1 button change detected. | +| |0 no button change detected. | ++------------------+-----------------------------------------------------------+ + +SCMI_MISC: System Control and Management MISC Vendor Protocol +================================================================ + +Provides miscellaneous functions. This includes controls that are miscellaneous +settings/actions that must be exposed from the SM to agents. They are device +specific and are usually define to access bit fields in various mix block +control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol +supports the following functions: + +- Describe the protocol version. +- Discover implementation attributes. +- Set/Get a control. +- Initiate an action on a control. +- Obtain platform (i.e. SM) build information. +- Obtain ROM passover data. +- Read boot/shutdown/reset information for the LM or the system. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x84 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Protocol attributes: | +| |Bits[31:24] Reserved, must be zero. | +| |Bits[23:16] Number of reset reasons. | +| |Bits[15:0] Number of controls | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the value data in words | ++------------------+-----------------------------------------------------------+ +|uint32 val[8] |value data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to set the | +| |control | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was get successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_ACTION +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 action |Action for the control | ++------------------+-----------------------------------------------------------+ +|uint32 numarg |Size of the argument data, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|arg[0, numarg -1] |Argument data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the action was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_DISCOVER_BUILD_INFO +~~~~~~~~~~~~~~~~~~~~~~~~ + +This function is used to obtain the build commit, data, time, number. + +message_id: 0x6 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the build info was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 buildnum |Build number | ++------------------+-----------------------------------------------------------+ +|uint32 buildcommit|Most significant 32 bits of the git commit hash | ++------------------+-----------------------------------------------------------+ +|uint8 date[16] |Date of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ +|uint8 time[16] |Time of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ + +MISC_ROM_PASSOVER_GET +~~~~~~~~~~~~~~~~~~~~~ + +ROM passover data is information exported by ROM and could be used by others. +It includes boot device, instance, type, mode and etc. This function is used +to obtain the ROM passover data. The returned block of words is structured as +defined in the ROM passover section in the SoC RM. + +message_id: 0x7 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the data was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the passover data in words, max 13 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|data[0, num - 1] |Passover data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_NOTIFY +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of control | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags, varies by control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: control id not exists. | +| |INVALID_PARAMETERS: if the input attributes flag specifies | +| |unsupported or invalid configurations.. | +| |DENIED: if the calling agent is not permitted to request | +| |the notification. | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 reasonid |Identifier for the reason | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if valid reason attributes are returned | +| |NOT_FOUND: if reasonId pertains to a non-existent reason. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Reason attributes. This parameter has the following | +| |format: Bits[31:0] Reserved, must be zero | +| |Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the reason | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_GET +~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Reason flags. This parameter has the following format: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] System: | +| |Set to 1 to return the system reason. | +| |Set to 0 to return the LM reason | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: reset reason return | ++--------------------+---------------------------------------------------------+ +|uint32 bootflags |Boot reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Reserved, must be zero. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 shutdownflags|Shutdown reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Number of valid extended info words. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 extinfo[8] |Array of extended info words | ++--------------------+---------------------------------------------------------+ + +MISC_SI_INFO_GET +~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: silicon info return | ++--------------------+---------------------------------------------------------+ +|uint32 deviceid |Silicon specific device ID | ++--------------------+---------------------------------------------------------+ +|uint32 sirev |Silicon specific revision | ++--------------------+---------------------------------------------------------+ +|uint32 partnum |Silicon specific part number | ++--------------------+---------------------------------------------------------+ +|uint8 siname[16] |Silicon name/revision. Null terminated ASCII string of up| +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_CFG_INFO_GET +~~~~~~~~~~~~~~~~~ + +message_id: 0xC +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: config name return | +| |NOT_SUPPORTED: name not available | ++--------------------+---------------------------------------------------------+ +|uint32 msel |Mode selector value | ++--------------------+---------------------------------------------------------+ +|uint8 cfgname[16] |config file basename. Null terminated ASCII string of up | +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_SYSLOG_GET +~~~~~~~~~~~~~~~ + +message_id: 0xD +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Device specific flags that might impact the data returned| +| |or clearing of the data | ++--------------------+---------------------------------------------------------+ +|uint32 logindex |Index to the first log word. Will be the first element in| +| |the return array | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: system log return | ++--------------------+---------------------------------------------------------+ +|uint32 numLogflags |Descriptor for the log data returned by this call. | +| |Bits[31:20] Number of remaining log words. | +| |Bits[15:12] Reserved, must be zero. | +| |Bits[11:0] Number of log words that are returned by this | +| |call | ++--------------------+---------------------------------------------------------+ +|uint32 syslog[N] |Log data array, N is defined in bits[11:0] of numLogflags| ++--------------------+---------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +MISC_CONTROL_EVENT +~~~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ctrlid |Identifier for the control that caused the event. | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Event flags, varies by control. | ++------------------+-----------------------------------------------------------+ diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c index 2175ffd6cef5..fda6a1573609 100644 --- a/drivers/firmware/arm_scmi/voltage.c +++ b/drivers/firmware/arm_scmi/voltage.c @@ -11,7 +11,7 @@ #include "protocols.h" /* Updated only after ALL the mandatory features for that version are merged */ -#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x20000 +#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x20001 #define VOLTAGE_DOMS_NUM_MASK GENMASK(15, 0) #define REMAINING_LEVELS_MASK GENMASK(31, 16) @@ -229,8 +229,10 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph, /* Retrieve domain attributes at first ... */ put_unaligned_le32(dom, td->tx.buf); /* Skip domain on comms error */ - if (ph->xops->do_xfer(ph, td)) + if (ph->xops->do_xfer(ph, td)) { + ph->xops->reset_rx_to_maxsz(ph, td); continue; + } v = vinfo->domains + dom; v->id = dom; diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c index 285fe7ad490d..3e8051fe8296 100644 --- a/drivers/firmware/arm_sdei.c +++ b/drivers/firmware/arm_sdei.c @@ -763,7 +763,7 @@ static int sdei_device_freeze(struct device *dev) int err; /* unregister private events */ - cpuhp_remove_state(sdei_entry_point); + cpuhp_remove_state(sdei_hp_state); err = sdei_unregister_shared(); if (err) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 23b002e4d4a0..fde0656481cc 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -9,7 +9,7 @@ #include <linux/memblock.h> #include <linux/random.h> #include <asm/dmi.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #ifndef SMBIOS_ENTRY_POINT_SCAN_START #define SMBIOS_ENTRY_POINT_SCAN_START 0xF0000 diff --git a/drivers/firmware/efi/capsule-loader.c b/drivers/firmware/efi/capsule-loader.c index 97bafb5f7038..0c17bdd388e1 100644 --- a/drivers/firmware/efi/capsule-loader.c +++ b/drivers/firmware/efi/capsule-loader.c @@ -309,7 +309,6 @@ static const struct file_operations efi_capsule_fops = { .open = efi_capsule_open, .write = efi_capsule_write, .release = efi_capsule_release, - .llseek = no_llseek, }; static struct miscdevice efi_capsule_misc = { diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c index 7d2cdd9e2227..b69e68ef3f02 100644 --- a/drivers/firmware/efi/cper.c +++ b/drivers/firmware/efi/cper.c @@ -434,12 +434,17 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n", pfx, pcie->bridge.secondary_status, pcie->bridge.control); - /* Fatal errors call __ghes_panic() before AER handler prints this */ - if ((pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) && - (gdata->error_severity & CPER_SEV_FATAL)) { + /* + * Print all valid AER info. Record may be from BERT (boot-time) or GHES (run-time). + * + * Fatal errors call __ghes_panic() before AER handler prints this. + */ + if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) { struct aer_capability_regs *aer; aer = (struct aer_capability_regs *)pcie->aer_info; + printk("%saer_cor_status: 0x%08x, aer_cor_mask: 0x%08x\n", + pfx, aer->cor_status, aer->cor_mask); printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n", pfx, aer->uncor_status, aer->uncor_mask); printk("%saer_uncor_severity: 0x%08x\n", diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index fdf07dd6f459..70490bf2697b 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -349,7 +349,7 @@ static void __init efi_debugfs_init(void) int i = 0; efi_debugfs = debugfs_create_dir("efi", NULL); - if (IS_ERR_OR_NULL(efi_debugfs)) + if (IS_ERR(efi_debugfs)) return; for_each_efi_memory_desc(md) { diff --git a/drivers/firmware/efi/fdtparams.c b/drivers/firmware/efi/fdtparams.c index 0ec83ba58097..b815d2a754ee 100644 --- a/drivers/firmware/efi/fdtparams.c +++ b/drivers/firmware/efi/fdtparams.c @@ -8,7 +8,7 @@ #include <linux/libfdt.h> #include <linux/of_fdt.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> enum { SYSTAB, diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index d33ccbc4a2c6..685098f9626f 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -1229,7 +1229,7 @@ efi_zboot_entry(efi_handle_t handle, efi_system_table_t *systab); efi_status_t allocate_unaccepted_bitmap(__u32 nr_desc, struct efi_boot_memmap *map); void process_unaccepted_memory(u64 start, u64 end); -void accept_memory(phys_addr_t start, phys_addr_t end); +void accept_memory(phys_addr_t start, unsigned long size); void arch_accept_memory(phys_addr_t start, phys_addr_t end); #endif diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c index c96d6dcee86c..e7d9204baee3 100644 --- a/drivers/firmware/efi/libstub/riscv-stub.c +++ b/drivers/firmware/efi/libstub/riscv-stub.c @@ -7,7 +7,7 @@ #include <asm/efi.h> #include <asm/sections.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "efistub.h" diff --git a/drivers/firmware/efi/libstub/riscv.c b/drivers/firmware/efi/libstub/riscv.c index 8022b104c3e6..f66f33ceb99e 100644 --- a/drivers/firmware/efi/libstub/riscv.c +++ b/drivers/firmware/efi/libstub/riscv.c @@ -7,7 +7,7 @@ #include <linux/libfdt.h> #include <asm/efi.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "efistub.h" diff --git a/drivers/firmware/efi/libstub/tpm.c b/drivers/firmware/efi/libstub/tpm.c index df3182f2e63a..1fd6823248ab 100644 --- a/drivers/firmware/efi/libstub/tpm.c +++ b/drivers/firmware/efi/libstub/tpm.c @@ -96,7 +96,7 @@ static void efi_retrieve_tcg2_eventlog(int version, efi_physical_addr_t log_loca } /* Allocate space for the logs and copy them. */ - status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, + status = efi_bs_call(allocate_pool, EFI_ACPI_RECLAIM_MEMORY, sizeof(*log_tbl) + log_size, (void **)&log_tbl); if (status != EFI_SUCCESS) { diff --git a/drivers/firmware/efi/libstub/unaccepted_memory.c b/drivers/firmware/efi/libstub/unaccepted_memory.c index c295ea3a6efc..757dbe734a47 100644 --- a/drivers/firmware/efi/libstub/unaccepted_memory.c +++ b/drivers/firmware/efi/libstub/unaccepted_memory.c @@ -177,9 +177,10 @@ void process_unaccepted_memory(u64 start, u64 end) start / unit_size, (end - start) / unit_size); } -void accept_memory(phys_addr_t start, phys_addr_t end) +void accept_memory(phys_addr_t start, unsigned long size) { unsigned long range_start, range_end; + phys_addr_t end = start + size; unsigned long bitmap_size; u64 unit_size; diff --git a/drivers/firmware/efi/libstub/zboot.c b/drivers/firmware/efi/libstub/zboot.c index 1ceace956758..af23b3c50228 100644 --- a/drivers/firmware/efi/libstub/zboot.c +++ b/drivers/firmware/efi/libstub/zboot.c @@ -3,7 +3,7 @@ #include <linux/efi.h> #include <linux/pe.h> #include <asm/efi.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "efistub.h" diff --git a/drivers/firmware/efi/test/efi_test.c b/drivers/firmware/efi/test/efi_test.c index 47d67bb0a516..9e2628728aad 100644 --- a/drivers/firmware/efi/test/efi_test.c +++ b/drivers/firmware/efi/test/efi_test.c @@ -750,7 +750,6 @@ static const struct file_operations efi_test_fops = { .unlocked_ioctl = efi_test_ioctl, .open = efi_test_open, .release = efi_test_close, - .llseek = no_llseek, }; static struct miscdevice efi_test_dev = { diff --git a/drivers/firmware/efi/unaccepted_memory.c b/drivers/firmware/efi/unaccepted_memory.c index 50f6503fe49f..c2c067eff634 100644 --- a/drivers/firmware/efi/unaccepted_memory.c +++ b/drivers/firmware/efi/unaccepted_memory.c @@ -30,11 +30,12 @@ static LIST_HEAD(accepting_list); * - memory that is below phys_base; * - memory that is above the memory that addressable by the bitmap; */ -void accept_memory(phys_addr_t start, phys_addr_t end) +void accept_memory(phys_addr_t start, unsigned long size) { struct efi_unaccepted_memory *unaccepted; unsigned long range_start, range_end; struct accept_range range, *entry; + phys_addr_t end = start + size; unsigned long flags; u64 unit_size; @@ -74,13 +75,13 @@ void accept_memory(phys_addr_t start, phys_addr_t end) * "guard" page is accepted in addition to the memory that needs to be * used: * - * 1. Implicitly extend the range_contains_unaccepted_memory(start, end) - * checks up to end+unit_size if 'end' is aligned on a unit_size - * boundary. + * 1. Implicitly extend the range_contains_unaccepted_memory(start, size) + * checks up to the next unit_size if 'start+size' is aligned on a + * unit_size boundary. * - * 2. Implicitly extend accept_memory(start, end) to end+unit_size if - * 'end' is aligned on a unit_size boundary. (immediately following - * this comment) + * 2. Implicitly extend accept_memory(start, size) to the next unit_size + * if 'size+end' is aligned on a unit_size boundary. (immediately + * following this comment) */ if (!(end % unit_size)) end += unit_size; @@ -156,9 +157,10 @@ retry: spin_unlock_irqrestore(&unaccepted_memory_lock, flags); } -bool range_contains_unaccepted_memory(phys_addr_t start, phys_addr_t end) +bool range_contains_unaccepted_memory(phys_addr_t start, unsigned long size) { struct efi_unaccepted_memory *unaccepted; + phys_addr_t end = start + size; unsigned long flags; bool ret = false; u64 unit_size; diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig index 183613f82a11..477d3f32d99a 100644 --- a/drivers/firmware/imx/Kconfig +++ b/drivers/firmware/imx/Kconfig @@ -22,3 +22,14 @@ config IMX_SCU This driver manages the IPC interface between host CPU and the SCU firmware running on M4. + +config IMX_SCMI_MISC_DRV + tristate "IMX SCMI MISC Protocol driver" + depends on IMX_SCMI_MISC_EXT || COMPILE_TEST + default y if ARCH_MXC + help + The System Controller Management Interface firmware (SCMI FW) is + a low-level system function which runs on a dedicated Cortex-M + core that could provide misc functions such as board control. + + This driver can also be built as a module. diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile index 8f9f04a513a8..8d046c341be8 100644 --- a/drivers/firmware/imx/Makefile +++ b/drivers/firmware/imx/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_IMX_DSP) += imx-dsp.o obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o +obj-${CONFIG_IMX_SCMI_MISC_DRV} += sm-misc.o diff --git a/drivers/firmware/imx/sm-misc.c b/drivers/firmware/imx/sm-misc.c new file mode 100644 index 000000000000..fc3ee12c2be8 --- /dev/null +++ b/drivers/firmware/imx/sm-misc.c @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + */ + +#include <linux/firmware/imx/sm.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/scmi_protocol.h> +#include <linux/scmi_imx_protocol.h> + +static const struct scmi_imx_misc_proto_ops *imx_misc_ctrl_ops; +static struct scmi_protocol_handle *ph; +struct notifier_block scmi_imx_misc_ctrl_nb; + +int scmi_imx_misc_ctrl_set(u32 id, u32 val) +{ + if (!ph) + return -EPROBE_DEFER; + + return imx_misc_ctrl_ops->misc_ctrl_set(ph, id, 1, &val); +}; +EXPORT_SYMBOL(scmi_imx_misc_ctrl_set); + +int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val) +{ + if (!ph) + return -EPROBE_DEFER; + + return imx_misc_ctrl_ops->misc_ctrl_get(ph, id, num, val); +} +EXPORT_SYMBOL(scmi_imx_misc_ctrl_get); + +static int scmi_imx_misc_ctrl_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + /* + * notifier_chain_register requires a valid notifier_block and + * valid notifier_call. SCMI_EVENT_IMX_MISC_CONTROL is needed + * to let SCMI firmware enable control events, but the hook here + * is just a dummy function to avoid kernel panic as of now. + */ + return 0; +} + +static int scmi_imx_misc_ctrl_probe(struct scmi_device *sdev) +{ + const struct scmi_handle *handle = sdev->handle; + struct device_node *np = sdev->dev.of_node; + u32 src_id, flags; + int ret, i, num; + + if (!handle) + return -ENODEV; + + if (imx_misc_ctrl_ops) { + dev_err(&sdev->dev, "misc ctrl already initialized\n"); + return -EEXIST; + } + + imx_misc_ctrl_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_IMX_MISC, &ph); + if (IS_ERR(imx_misc_ctrl_ops)) + return PTR_ERR(imx_misc_ctrl_ops); + + num = of_property_count_u32_elems(np, "nxp,ctrl-ids"); + if (num % 2) { + dev_err(&sdev->dev, "Invalid wakeup-sources\n"); + return -EINVAL; + } + + scmi_imx_misc_ctrl_nb.notifier_call = &scmi_imx_misc_ctrl_notifier; + for (i = 0; i < num; i += 2) { + ret = of_property_read_u32_index(np, "nxp,ctrl-ids", i, &src_id); + if (ret) { + dev_err(&sdev->dev, "Failed to read ctrl-id: %i\n", i); + continue; + } + + ret = of_property_read_u32_index(np, "nxp,ctrl-ids", i + 1, &flags); + if (ret) { + dev_err(&sdev->dev, "Failed to read ctrl-id value: %d\n", i + 1); + continue; + } + + ret = handle->notify_ops->devm_event_notifier_register(sdev, SCMI_PROTOCOL_IMX_MISC, + SCMI_EVENT_IMX_MISC_CONTROL, + &src_id, + &scmi_imx_misc_ctrl_nb); + if (ret) { + dev_err(&sdev->dev, "Failed to register scmi misc event: %d\n", src_id); + } else { + ret = imx_misc_ctrl_ops->misc_ctrl_req_notify(ph, src_id, + SCMI_EVENT_IMX_MISC_CONTROL, + flags); + if (ret) + dev_err(&sdev->dev, "Failed to req notify: %d\n", src_id); + } + } + + return 0; +} + +static const struct scmi_device_id scmi_id_table[] = { + { SCMI_PROTOCOL_IMX_MISC, "imx-misc-ctrl" }, + { }, +}; +MODULE_DEVICE_TABLE(scmi, scmi_id_table); + +static struct scmi_driver scmi_imx_misc_ctrl_driver = { + .name = "scmi-imx-misc-ctrl", + .probe = scmi_imx_misc_ctrl_probe, + .id_table = scmi_id_table, +}; +module_scmi_driver(scmi_imx_misc_ctrl_driver); + +MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>"); +MODULE_DESCRIPTION("IMX SM MISC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c index 30de47895b1c..0f7ec8848202 100644 --- a/drivers/firmware/microchip/mpfs-auto-update.c +++ b/drivers/firmware/microchip/mpfs-auto-update.c @@ -76,14 +76,11 @@ #define AUTO_UPDATE_INFO_SIZE SZ_1M #define AUTO_UPDATE_BITSTREAM_BASE (AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_INFO_SIZE) -#define AUTO_UPDATE_TIMEOUT_MS 60000 - struct mpfs_auto_update_priv { struct mpfs_sys_controller *sys_controller; struct device *dev; struct mtd_info *flash; struct fw_upload *fw_uploader; - struct completion programming_complete; size_t size_per_bitstream; bool cancel_request; }; @@ -156,19 +153,6 @@ static void mpfs_auto_update_cancel(struct fw_upload *fw_uploader) static enum fw_upload_err mpfs_auto_update_poll_complete(struct fw_upload *fw_uploader) { - struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle; - int ret; - - /* - * There is no meaningful way to get the status of the programming while - * it is in progress, so attempting anything other than waiting for it - * to complete would be misplaced. - */ - ret = wait_for_completion_timeout(&priv->programming_complete, - msecs_to_jiffies(AUTO_UPDATE_TIMEOUT_MS)); - if (ret) - return FW_UPLOAD_ERR_TIMEOUT; - return FW_UPLOAD_ERR_NONE; } @@ -349,33 +333,23 @@ static enum fw_upload_err mpfs_auto_update_write(struct fw_upload *fw_uploader, u32 offset, u32 size, u32 *written) { struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle; - enum fw_upload_err err = FW_UPLOAD_ERR_NONE; int ret; - reinit_completion(&priv->programming_complete); - ret = mpfs_auto_update_write_bitstream(fw_uploader, data, offset, size, written); - if (ret) { - err = FW_UPLOAD_ERR_RW_ERROR; - goto out; - } + if (ret) + return FW_UPLOAD_ERR_RW_ERROR; - if (priv->cancel_request) { - err = FW_UPLOAD_ERR_CANCELED; - goto out; - } + if (priv->cancel_request) + return FW_UPLOAD_ERR_CANCELED; if (mpfs_auto_update_is_bitstream_info(data, size)) - goto out; + return FW_UPLOAD_ERR_NONE; ret = mpfs_auto_update_verify_image(fw_uploader); if (ret) - err = FW_UPLOAD_ERR_FW_INVALID; + return FW_UPLOAD_ERR_FW_INVALID; -out: - complete(&priv->programming_complete); - - return err; + return FW_UPLOAD_ERR_NONE; } static const struct fw_upload_ops mpfs_auto_update_ops = { @@ -461,8 +435,6 @@ static int mpfs_auto_update_probe(struct platform_device *pdev) return dev_err_probe(dev, ret, "The current bitstream does not support auto-update\n"); - init_completion(&priv->programming_complete); - fw_uploader = firmware_upload_register(THIS_MODULE, dev, "mpfs-auto-update", &mpfs_auto_update_ops, priv); if (IS_ERR(fw_uploader)) diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig index 73a1a41bf92d..b477d54b495a 100644 --- a/drivers/firmware/qcom/Kconfig +++ b/drivers/firmware/qcom/Kconfig @@ -41,17 +41,6 @@ config QCOM_TZMEM_MODE_SHMBRIDGE endchoice -config QCOM_SCM_DOWNLOAD_MODE_DEFAULT - bool "Qualcomm download mode enabled by default" - depends on QCOM_SCM - help - A device with "download mode" enabled will upon an unexpected - warm-restart enter a special debug mode that allows the user to - "download" memory content over USB for offline postmortem analysis. - The feature can be enabled/disabled on the kernel command line. - - Say Y here to enable "download mode" by default. - config QCOM_QSEECOM bool "Qualcomm QSEECOM interface driver" depends on QCOM_SCM=y diff --git a/drivers/firmware/qcom/qcom_qseecom_uefisecapp.c b/drivers/firmware/qcom/qcom_qseecom_uefisecapp.c index 6fefa4fe80e8..447246bd04be 100644 --- a/drivers/firmware/qcom/qcom_qseecom_uefisecapp.c +++ b/drivers/firmware/qcom/qcom_qseecom_uefisecapp.c @@ -715,6 +715,10 @@ static int qcuefi_set_reference(struct qcuefi_client *qcuefi) static struct qcuefi_client *qcuefi_acquire(void) { mutex_lock(&__qcuefi_lock); + if (!__qcuefi) { + mutex_unlock(&__qcuefi_lock); + return NULL; + } return __qcuefi; } diff --git a/drivers/firmware/qcom/qcom_scm-smc.c b/drivers/firmware/qcom/qcom_scm-smc.c index dca5f3f1883b..2b4c2826f572 100644 --- a/drivers/firmware/qcom/qcom_scm-smc.c +++ b/drivers/firmware/qcom/qcom_scm-smc.c @@ -73,7 +73,7 @@ int scm_get_wq_ctx(u32 *wq_ctx, u32 *flags, u32 *more_pending) struct arm_smccc_res get_wq_res; struct arm_smccc_args get_wq_ctx = {0}; - get_wq_ctx.args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, + get_wq_ctx.args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, ARM_SMCCC_OWNER_SIP, SCM_SMC_FNID(QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_GET_WQ_CTX)); diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 00c379a3cceb..2e4260ba5f79 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -18,6 +18,7 @@ #include <linux/init.h> #include <linux/interconnect.h> #include <linux/interrupt.h> +#include <linux/kstrtox.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> @@ -32,8 +33,7 @@ #include "qcom_scm.h" #include "qcom_tzmem.h" -static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT); -module_param(download_mode, bool, 0); +static u32 download_mode; struct qcom_scm { struct device *dev; @@ -112,6 +112,7 @@ enum qcom_scm_qseecom_tz_cmd_info { }; #define QSEECOM_MAX_APP_NAME_SIZE 64 +#define SHMBRIDGE_RESULT_NOTSUPP 4 /* Each bit configures cold/warm boot address for one of the 4 CPUs */ static const u8 qcom_scm_cpu_cold_bits[QCOM_SCM_BOOT_MAX_CPUS] = { @@ -126,6 +127,8 @@ static const u8 qcom_scm_cpu_warm_bits[QCOM_SCM_BOOT_MAX_CPUS] = { #define QCOM_DLOAD_MASK GENMASK(5, 4) #define QCOM_DLOAD_NODUMP 0 #define QCOM_DLOAD_FULLDUMP 1 +#define QCOM_DLOAD_MINIDUMP 2 +#define QCOM_DLOAD_BOTHDUMP 3 static const char * const qcom_scm_convention_names[] = { [SMC_CONVENTION_UNKNOWN] = "unknown", @@ -134,6 +137,13 @@ static const char * const qcom_scm_convention_names[] = { [SMC_CONVENTION_LEGACY] = "smc legacy", }; +static const char * const download_mode_name[] = { + [QCOM_DLOAD_NODUMP] = "off", + [QCOM_DLOAD_FULLDUMP] = "full", + [QCOM_DLOAD_MINIDUMP] = "mini", + [QCOM_DLOAD_BOTHDUMP] = "full,mini", +}; + static struct qcom_scm *__scm; static int qcom_scm_clk_enable(void) @@ -207,7 +217,7 @@ static DEFINE_SPINLOCK(scm_query_lock); struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void) { - return __scm->mempool; + return __scm ? __scm->mempool : NULL; } static enum qcom_scm_convention __get_convention(void) @@ -526,18 +536,17 @@ static int qcom_scm_io_rmw(phys_addr_t addr, unsigned int mask, unsigned int val return qcom_scm_io_writel(addr, new); } -static void qcom_scm_set_download_mode(bool enable) +static void qcom_scm_set_download_mode(u32 dload_mode) { - u32 val = enable ? QCOM_DLOAD_FULLDUMP : QCOM_DLOAD_NODUMP; int ret = 0; if (__scm->dload_mode_addr) { ret = qcom_scm_io_rmw(__scm->dload_mode_addr, QCOM_DLOAD_MASK, - FIELD_PREP(QCOM_DLOAD_MASK, val)); + FIELD_PREP(QCOM_DLOAD_MASK, dload_mode)); } else if (__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE)) { - ret = __qcom_scm_set_dload_mode(__scm->dev, enable); - } else { + ret = __qcom_scm_set_dload_mode(__scm->dev, !!dload_mode); + } else if (dload_mode) { dev_err(__scm->dev, "No available mechanism for setting download mode\n"); } @@ -1353,6 +1362,8 @@ EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh_available); int qcom_scm_shm_bridge_enable(void) { + int ret; + struct qcom_scm_desc desc = { .svc = QCOM_SCM_SVC_MP, .cmd = QCOM_SCM_MP_SHM_BRIDGE_ENABLE, @@ -1365,7 +1376,15 @@ int qcom_scm_shm_bridge_enable(void) QCOM_SCM_MP_SHM_BRIDGE_ENABLE)) return -EOPNOTSUPP; - return qcom_scm_call(__scm->dev, &desc, &res) ?: res.result[0]; + ret = qcom_scm_call(__scm->dev, &desc, &res); + + if (ret) + return ret; + + if (res.result[0] == SHMBRIDGE_RESULT_NOTSUPP) + return -EOPNOTSUPP; + + return res.result[0]; } EXPORT_SYMBOL_GPL(qcom_scm_shm_bridge_enable); @@ -1724,7 +1743,10 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); */ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { { .compatible = "lenovo,flex-5g" }, + { .compatible = "lenovo,thinkpad-t14s" }, { .compatible = "lenovo,thinkpad-x13s", }, + { .compatible = "microsoft,romulus13", }, + { .compatible = "microsoft,romulus15", }, { .compatible = "qcom,sc8180x-primus" }, { .compatible = "qcom,x1e80100-crd" }, { .compatible = "qcom,x1e80100-qcp" }, @@ -1886,6 +1908,45 @@ out: return IRQ_HANDLED; } +static int get_download_mode(char *buffer, const struct kernel_param *kp) +{ + if (download_mode >= ARRAY_SIZE(download_mode_name)) + return sysfs_emit(buffer, "unknown mode\n"); + + return sysfs_emit(buffer, "%s\n", download_mode_name[download_mode]); +} + +static int set_download_mode(const char *val, const struct kernel_param *kp) +{ + bool tmp; + int ret; + + ret = sysfs_match_string(download_mode_name, val); + if (ret < 0) { + ret = kstrtobool(val, &tmp); + if (ret < 0) { + pr_err("qcom_scm: err: %d\n", ret); + return ret; + } + + ret = tmp ? 1 : 0; + } + + download_mode = ret; + if (__scm) + qcom_scm_set_download_mode(download_mode); + + return 0; +} + +static const struct kernel_param_ops download_mode_param_ops = { + .get = get_download_mode, + .set = set_download_mode, +}; + +module_param_cb(download_mode, &download_mode_param_ops, NULL, 0644); +MODULE_PARM_DESC(download_mode, "download mode: off/0/N for no dump mode, full/on/1/Y for full dump mode, mini for minidump mode and full,mini for both full and minidump mode together are acceptable values"); + static int qcom_scm_probe(struct platform_device *pdev) { struct qcom_tzmem_pool_config pool_config; @@ -1950,18 +2011,16 @@ static int qcom_scm_probe(struct platform_device *pdev) __get_convention(); /* - * If requested enable "download mode", from this point on warmboot + * If "download mode" is requested, from this point on warmboot * will cause the boot stages to enter download mode, unless * disabled below by a clean shutdown/reboot. */ - if (download_mode) - qcom_scm_set_download_mode(true); - + qcom_scm_set_download_mode(download_mode); /* * Disable SDI if indicated by DT that it is enabled by default. */ - if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled")) + if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled") || !download_mode) qcom_scm_disable_sdi(); ret = of_reserved_mem_device_init(__scm->dev); @@ -2003,7 +2062,7 @@ static int qcom_scm_probe(struct platform_device *pdev) static void qcom_scm_shutdown(struct platform_device *pdev) { /* Clean shutdown, disable download mode to allow normal restart */ - qcom_scm_set_download_mode(false); + qcom_scm_set_download_mode(QCOM_DLOAD_NODUMP); } static const struct of_device_id qcom_scm_dt_match[] = { diff --git a/drivers/firmware/qcom/qcom_tzmem.c b/drivers/firmware/qcom/qcom_tzmem.c index 17948cfc82e7..92b365178235 100644 --- a/drivers/firmware/qcom/qcom_tzmem.c +++ b/drivers/firmware/qcom/qcom_tzmem.c @@ -40,7 +40,6 @@ struct qcom_tzmem_pool { }; struct qcom_tzmem_chunk { - phys_addr_t paddr; size_t size; struct qcom_tzmem_pool *owner; }; @@ -78,6 +77,7 @@ static bool qcom_tzmem_using_shm_bridge; /* List of machines that are known to not support SHM bridge correctly. */ static const char *const qcom_tzmem_blacklist[] = { "qcom,sc8180x", + "qcom,sdm670", /* failure in GPU firmware loading */ "qcom,sdm845", /* reset in rmtfs memory assignment */ "qcom,sm8150", /* reset in rmtfs memory assignment */ NULL @@ -385,7 +385,6 @@ again: return NULL; } - chunk->paddr = gen_pool_virt_to_phys(pool->genpool, vaddr); chunk->size = size; chunk->owner = pool; @@ -431,25 +430,37 @@ void qcom_tzmem_free(void *vaddr) EXPORT_SYMBOL_GPL(qcom_tzmem_free); /** - * qcom_tzmem_to_phys() - Map the virtual address of a TZ buffer to physical. - * @vaddr: Virtual address of the buffer allocated from a TZ memory pool. + * qcom_tzmem_to_phys() - Map the virtual address of TZ memory to physical. + * @vaddr: Virtual address of memory allocated from a TZ memory pool. * - * Can be used in any context. The address must have been returned by a call - * to qcom_tzmem_alloc(). + * Can be used in any context. The address must point to memory allocated + * using qcom_tzmem_alloc(). * - * Returns: Physical address of the buffer. + * Returns: + * Physical address mapped from the virtual or 0 if the mapping failed. */ phys_addr_t qcom_tzmem_to_phys(void *vaddr) { struct qcom_tzmem_chunk *chunk; + struct radix_tree_iter iter; + void __rcu **slot; + phys_addr_t ret; guard(spinlock_irqsave)(&qcom_tzmem_chunks_lock); - chunk = radix_tree_lookup(&qcom_tzmem_chunks, (unsigned long)vaddr); - if (!chunk) - return 0; + radix_tree_for_each_slot(slot, &qcom_tzmem_chunks, &iter, 0) { + chunk = radix_tree_deref_slot_protected(slot, + &qcom_tzmem_chunks_lock); - return chunk->paddr; + ret = gen_pool_virt_to_phys(chunk->owner->genpool, + (unsigned long)vaddr); + if (ret == -1) + continue; + + return ret; + } + + return 0; } EXPORT_SYMBOL_GPL(qcom_tzmem_to_phys); diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c index 5f43dfa22f79..85c525745b31 100644 --- a/drivers/firmware/qemu_fw_cfg.c +++ b/drivers/firmware/qemu_fw_cfg.c @@ -452,7 +452,7 @@ static void fw_cfg_sysfs_release_entry(struct kobject *kobj) } /* kobj_type: ties together all properties required to register an entry */ -static struct kobj_type fw_cfg_sysfs_entry_ktype = { +static const struct kobj_type fw_cfg_sysfs_entry_ktype = { .default_groups = fw_cfg_sysfs_entry_groups, .sysfs_ops = &fw_cfg_sysfs_attr_ops, .release = fw_cfg_sysfs_release_entry, diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index ac34876a97f8..18cc34987108 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -62,7 +62,6 @@ rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data) ret = 0; } else { ret = -ETIMEDOUT; - WARN_ONCE(1, "Firmware transaction timeout"); } } else { dev_err(fw->cl.dev, "mbox_send_message returned %d\n", ret); @@ -125,6 +124,8 @@ int rpi_firmware_property_list(struct rpi_firmware *fw, dev_err(fw->cl.dev, "Request 0x%08x returned status 0x%08x\n", buf[2], buf[1]); ret = -EINVAL; + } else if (ret == -ETIMEDOUT) { + WARN_ONCE(1, "Firmware transaction 0x%08x timeout", buf[2]); } dma_free_coherent(fw->chan->mbox->dev, PAGE_ALIGN(size), buf, bus_addr); diff --git a/drivers/firmware/smccc/kvm_guest.c b/drivers/firmware/smccc/kvm_guest.c index 89a68e7eeaa6..f3319be20b36 100644 --- a/drivers/firmware/smccc/kvm_guest.c +++ b/drivers/firmware/smccc/kvm_guest.c @@ -39,6 +39,8 @@ void __init kvm_init_hyp_services(void) pr_info("hypervisor services detected (0x%08lx 0x%08lx 0x%08lx 0x%08lx)\n", res.a3, res.a2, res.a1, res.a0); + + kvm_arch_init_hyp_services(); } bool kvm_arm_hyp_service_available(u32 func_id) diff --git a/drivers/firmware/smccc/smccc.c b/drivers/firmware/smccc/smccc.c index d670635914ec..a74600d9f2d7 100644 --- a/drivers/firmware/smccc/smccc.c +++ b/drivers/firmware/smccc/smccc.c @@ -16,7 +16,6 @@ static u32 smccc_version = ARM_SMCCC_VERSION_1_0; static enum arm_smccc_conduit smccc_conduit = SMCCC_CONDUIT_NONE; bool __ro_after_init smccc_trng_available = false; -u64 __ro_after_init smccc_has_sve_hint = false; s32 __ro_after_init smccc_soc_id_version = SMCCC_RET_NOT_SUPPORTED; s32 __ro_after_init smccc_soc_id_revision = SMCCC_RET_NOT_SUPPORTED; @@ -28,9 +27,6 @@ void __init arm_smccc_version_init(u32 version, enum arm_smccc_conduit conduit) smccc_conduit = conduit; smccc_trng_available = smccc_probe_trng(); - if (IS_ENABLED(CONFIG_ARM64_SVE) && - smccc_version >= ARM_SMCCC_VERSION_1_3) - smccc_has_sve_hint = true; if ((smccc_version >= ARM_SMCCC_VERSION_1_2) && (smccc_conduit != SMCCC_CONDUIT_NONE)) { diff --git a/drivers/firmware/sysfb.c b/drivers/firmware/sysfb.c index 921f61507ae8..a3df782fa687 100644 --- a/drivers/firmware/sysfb.c +++ b/drivers/firmware/sysfb.c @@ -39,6 +39,8 @@ static struct platform_device *pd; static DEFINE_MUTEX(disable_lock); static bool disabled; +static struct device *sysfb_parent_dev(const struct screen_info *si); + static bool sysfb_unregister(void) { if (IS_ERR_OR_NULL(pd)) @@ -52,6 +54,7 @@ static bool sysfb_unregister(void) /** * sysfb_disable() - disable the Generic System Framebuffers support + * @dev: the device to check if non-NULL * * This disables the registration of system framebuffer devices that match the * generic drivers that make use of the system framebuffer set up by firmware. @@ -61,17 +64,23 @@ static bool sysfb_unregister(void) * Context: The function can sleep. A @disable_lock mutex is acquired to serialize * against sysfb_init(), that registers a system framebuffer device. */ -void sysfb_disable(void) +void sysfb_disable(struct device *dev) { + struct screen_info *si = &screen_info; + struct device *parent; + mutex_lock(&disable_lock); - sysfb_unregister(); - disabled = true; + parent = sysfb_parent_dev(si); + if (!dev || !parent || dev == parent) { + sysfb_unregister(); + disabled = true; + } mutex_unlock(&disable_lock); } EXPORT_SYMBOL_GPL(sysfb_disable); #if defined(CONFIG_PCI) -static __init bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) +static bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) { /* * TODO: Try to integrate this code into the PCI subsystem @@ -87,13 +96,13 @@ static __init bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) return true; } #else -static __init bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) +static bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) { return false; } #endif -static __init struct device *sysfb_parent_dev(const struct screen_info *si) +static struct device *sysfb_parent_dev(const struct screen_info *si) { struct pci_dev *pdev; diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c index c1590d3aa9cb..2bee6e918f81 100644 --- a/drivers/firmware/tegra/bpmp.c +++ b/drivers/firmware/tegra/bpmp.c @@ -3,6 +3,7 @@ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. */ +#include <linux/cleanup.h> #include <linux/clk/tegra.h> #include <linux/genalloc.h> #include <linux/mailbox_client.h> @@ -24,12 +25,6 @@ #define MSG_RING BIT(1) #define TAG_SZ 32 -static inline struct tegra_bpmp * -mbox_client_to_bpmp(struct mbox_client *client) -{ - return container_of(client, struct tegra_bpmp, mbox.client); -} - static inline const struct tegra_bpmp_ops * channel_to_ops(struct tegra_bpmp_channel *channel) { @@ -40,29 +35,24 @@ channel_to_ops(struct tegra_bpmp_channel *channel) struct tegra_bpmp *tegra_bpmp_get(struct device *dev) { + struct device_node *np __free(device_node); struct platform_device *pdev; struct tegra_bpmp *bpmp; - struct device_node *np; np = of_parse_phandle(dev->of_node, "nvidia,bpmp", 0); if (!np) return ERR_PTR(-ENOENT); pdev = of_find_device_by_node(np); - if (!pdev) { - bpmp = ERR_PTR(-ENODEV); - goto put; - } + if (!pdev) + return ERR_PTR(-ENODEV); bpmp = platform_get_drvdata(pdev); if (!bpmp) { - bpmp = ERR_PTR(-EPROBE_DEFER); put_device(&pdev->dev); - goto put; + return ERR_PTR(-EPROBE_DEFER); } -put: - of_node_put(np); return bpmp; } EXPORT_SYMBOL_GPL(tegra_bpmp_get); diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c index 3e7f186d239a..f3bc0d427825 100644 --- a/drivers/firmware/turris-mox-rwtm.c +++ b/drivers/firmware/turris-mox-rwtm.c @@ -5,26 +5,43 @@ * Copyright (C) 2019, 2024 Marek Behún <kabel@kernel.org> */ +#include <crypto/sha2.h> +#include <linux/align.h> #include <linux/armada-37xx-rwtm-mailbox.h> #include <linux/completion.h> +#include <linux/container_of.h> #include <linux/debugfs.h> +#include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/fs.h> #include <linux/hw_random.h> +#include <linux/if_ether.h> +#include <linux/kobject.h> #include <linux/mailbox_client.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of.h> #include <linux/platform_device.h> -#include <linux/slab.h> +#include <linux/sizes.h> +#include <linux/sysfs.h> +#include <linux/types.h> #define DRIVER_NAME "turris-mox-rwtm" +#define RWTM_DMA_BUFFER_SIZE SZ_4K + /* * The macros and constants below come from Turris Mox's rWTM firmware code. * This firmware is open source and it's sources can be found at * https://gitlab.labs.nic.cz/turris/mox-boot-builder/tree/master/wtmi. */ +#define MOX_ECC_NUMBER_WORDS 17 +#define MOX_ECC_NUMBER_LEN (MOX_ECC_NUMBER_WORDS * sizeof(u32)) + +#define MOX_ECC_SIGNATURE_WORDS (2 * MOX_ECC_NUMBER_WORDS) + #define MBOX_STS_SUCCESS (0 << 30) #define MBOX_STS_FAIL (1 << 30) #define MBOX_STS_BADCMD (2 << 30) @@ -44,13 +61,9 @@ enum mbox_cmd { MBOX_CMD_OTP_WRITE = 8, }; -struct mox_kobject; - struct mox_rwtm { - struct device *dev; struct mbox_client mbox_client; struct mbox_chan *mbox; - struct mox_kobject *kobj; struct hwrng hwrng; struct armada_37xx_rwtm_rx_msg reply; @@ -62,13 +75,13 @@ struct mox_rwtm { struct completion cmd_done; /* board information */ - int has_board_info; + bool has_board_info; u64 serial_number; int board_version, ram_size; - u8 mac_address1[6], mac_address2[6]; + u8 mac_address1[ETH_ALEN], mac_address2[ETH_ALEN]; /* public key burned in eFuse */ - int has_pubkey; + bool has_pubkey; u8 pubkey[135]; #ifdef CONFIG_DEBUG_FS @@ -78,65 +91,27 @@ struct mox_rwtm { * It should be rewritten via crypto API once akcipher API is available * from userspace. */ - struct dentry *debugfs_root; - u32 last_sig[34]; - int last_sig_done; + u32 last_sig[MOX_ECC_SIGNATURE_WORDS]; + bool last_sig_done; #endif }; -struct mox_kobject { - struct kobject kobj; - struct mox_rwtm *rwtm; -}; - -static inline struct kobject *rwtm_to_kobj(struct mox_rwtm *rwtm) -{ - return &rwtm->kobj->kobj; -} - -static inline struct mox_rwtm *to_rwtm(struct kobject *kobj) -{ - return container_of(kobj, struct mox_kobject, kobj)->rwtm; -} - -static void mox_kobj_release(struct kobject *kobj) -{ - kfree(to_rwtm(kobj)->kobj); -} - -static const struct kobj_type mox_kobj_ktype = { - .release = mox_kobj_release, - .sysfs_ops = &kobj_sysfs_ops, -}; - -static int mox_kobj_create(struct mox_rwtm *rwtm) +static inline struct device *rwtm_dev(struct mox_rwtm *rwtm) { - rwtm->kobj = kzalloc(sizeof(*rwtm->kobj), GFP_KERNEL); - if (!rwtm->kobj) - return -ENOMEM; - - kobject_init(rwtm_to_kobj(rwtm), &mox_kobj_ktype); - if (kobject_add(rwtm_to_kobj(rwtm), firmware_kobj, "turris-mox-rwtm")) { - kobject_put(rwtm_to_kobj(rwtm)); - return -ENXIO; - } - - rwtm->kobj->rwtm = rwtm; - - return 0; + return rwtm->mbox_client.dev; } #define MOX_ATTR_RO(name, format, cat) \ static ssize_t \ -name##_show(struct kobject *kobj, struct kobj_attribute *a, \ +name##_show(struct device *dev, struct device_attribute *a, \ char *buf) \ { \ - struct mox_rwtm *rwtm = to_rwtm(kobj); \ + struct mox_rwtm *rwtm = dev_get_drvdata(dev); \ if (!rwtm->has_##cat) \ return -ENODATA; \ - return sprintf(buf, format, rwtm->name); \ + return sysfs_emit(buf, format, rwtm->name); \ } \ -static struct kobj_attribute mox_attr_##name = __ATTR_RO(name) +static DEVICE_ATTR_RO(name) MOX_ATTR_RO(serial_number, "%016llX\n", board_info); MOX_ATTR_RO(board_version, "%i\n", board_info); @@ -145,6 +120,17 @@ MOX_ATTR_RO(mac_address1, "%pM\n", board_info); MOX_ATTR_RO(mac_address2, "%pM\n", board_info); MOX_ATTR_RO(pubkey, "%s\n", pubkey); +static struct attribute *turris_mox_rwtm_attrs[] = { + &dev_attr_serial_number.attr, + &dev_attr_board_version.attr, + &dev_attr_ram_size.attr, + &dev_attr_mac_address1.attr, + &dev_attr_mac_address2.attr, + &dev_attr_pubkey.attr, + NULL +}; +ATTRIBUTE_GROUPS(turris_mox_rwtm); + static int mox_get_status(enum mbox_cmd cmd, u32 retval) { if (MBOX_STS_CMD(retval) != cmd) @@ -152,23 +138,13 @@ static int mox_get_status(enum mbox_cmd cmd, u32 retval) else if (MBOX_STS_ERROR(retval) == MBOX_STS_FAIL) return -(int)MBOX_STS_VALUE(retval); else if (MBOX_STS_ERROR(retval) == MBOX_STS_BADCMD) - return -ENOSYS; + return -EOPNOTSUPP; else if (MBOX_STS_ERROR(retval) != MBOX_STS_SUCCESS) return -EIO; else return MBOX_STS_VALUE(retval); } -static const struct attribute *mox_rwtm_attrs[] = { - &mox_attr_serial_number.attr, - &mox_attr_board_version.attr, - &mox_attr_ram_size.attr, - &mox_attr_mac_address1.attr, - &mox_attr_mac_address2.attr, - &mox_attr_pubkey.attr, - NULL -}; - static void mox_rwtm_rx_callback(struct mbox_client *cl, void *data) { struct mox_rwtm *rwtm = dev_get_drvdata(cl->dev); @@ -181,6 +157,34 @@ static void mox_rwtm_rx_callback(struct mbox_client *cl, void *data) complete(&rwtm->cmd_done); } +static int mox_rwtm_exec(struct mox_rwtm *rwtm, enum mbox_cmd cmd, + struct armada_37xx_rwtm_tx_msg *msg, + bool interruptible) +{ + struct armada_37xx_rwtm_tx_msg _msg = {}; + int ret; + + if (!msg) + msg = &_msg; + + msg->command = cmd; + + ret = mbox_send_message(rwtm->mbox, msg); + if (ret < 0) + return ret; + + if (interruptible) { + ret = wait_for_completion_interruptible(&rwtm->cmd_done); + if (ret < 0) + return ret; + } else { + if (!wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2)) + return -ETIMEDOUT; + } + + return mox_get_status(cmd, rwtm->reply.retval); +} + static void reply_to_mac_addr(u8 *mac, u32 t1, u32 t2) { mac[0] = t1 >> 8; @@ -193,24 +197,16 @@ static void reply_to_mac_addr(u8 *mac, u32 t1, u32 t2) static int mox_get_board_info(struct mox_rwtm *rwtm) { - struct armada_37xx_rwtm_tx_msg msg; + struct device *dev = rwtm_dev(rwtm); struct armada_37xx_rwtm_rx_msg *reply = &rwtm->reply; int ret; - msg.command = MBOX_CMD_BOARD_INFO; - ret = mbox_send_message(rwtm->mbox, &msg); - if (ret < 0) - return ret; - - if (!wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2)) - return -ETIMEDOUT; - - ret = mox_get_status(MBOX_CMD_BOARD_INFO, reply->retval); + ret = mox_rwtm_exec(rwtm, MBOX_CMD_BOARD_INFO, NULL, false); if (ret == -ENODATA) { - dev_warn(rwtm->dev, + dev_warn(dev, "Board does not have manufacturing information burned!\n"); - } else if (ret == -ENOSYS) { - dev_notice(rwtm->dev, + } else if (ret == -EOPNOTSUPP) { + dev_notice(dev, "Firmware does not support the BOARD_INFO command\n"); } else if (ret < 0) { return ret; @@ -224,7 +220,7 @@ static int mox_get_board_info(struct mox_rwtm *rwtm) reply->status[5]); reply_to_mac_addr(rwtm->mac_address2, reply->status[6], reply->status[7]); - rwtm->has_board_info = 1; + rwtm->has_board_info = true; pr_info("Turris Mox serial number %016llX\n", rwtm->serial_number); @@ -232,26 +228,18 @@ static int mox_get_board_info(struct mox_rwtm *rwtm) pr_info(" burned RAM size %i MiB\n", rwtm->ram_size); } - msg.command = MBOX_CMD_ECDSA_PUB_KEY; - ret = mbox_send_message(rwtm->mbox, &msg); - if (ret < 0) - return ret; - - if (!wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2)) - return -ETIMEDOUT; - - ret = mox_get_status(MBOX_CMD_ECDSA_PUB_KEY, reply->retval); + ret = mox_rwtm_exec(rwtm, MBOX_CMD_ECDSA_PUB_KEY, NULL, false); if (ret == -ENODATA) { - dev_warn(rwtm->dev, "Board has no public key burned!\n"); - } else if (ret == -ENOSYS) { - dev_notice(rwtm->dev, + dev_warn(dev, "Board has no public key burned!\n"); + } else if (ret == -EOPNOTSUPP) { + dev_notice(dev, "Firmware does not support the ECDSA_PUB_KEY command\n"); } else if (ret < 0) { return ret; } else { u32 *s = reply->status; - rwtm->has_pubkey = 1; + rwtm->has_pubkey = true; sprintf(rwtm->pubkey, "%06x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x", ret, s[0], s[1], s[2], s[3], s[4], s[5], s[6], s[7], @@ -263,37 +251,22 @@ static int mox_get_board_info(struct mox_rwtm *rwtm) static int check_get_random_support(struct mox_rwtm *rwtm) { - struct armada_37xx_rwtm_tx_msg msg; - int ret; + struct armada_37xx_rwtm_tx_msg msg = { + .args = { 1, rwtm->buf_phys, 4 }, + }; - msg.command = MBOX_CMD_GET_RANDOM; - msg.args[0] = 1; - msg.args[1] = rwtm->buf_phys; - msg.args[2] = 4; - - ret = mbox_send_message(rwtm->mbox, &msg); - if (ret < 0) - return ret; - - if (!wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2)) - return -ETIMEDOUT; - - return mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval); + return mox_rwtm_exec(rwtm, MBOX_CMD_GET_RANDOM, &msg, false); } static int mox_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait) { - struct mox_rwtm *rwtm = (struct mox_rwtm *) rng->priv; - struct armada_37xx_rwtm_tx_msg msg; + struct mox_rwtm *rwtm = container_of(rng, struct mox_rwtm, hwrng); + struct armada_37xx_rwtm_tx_msg msg = { + .args = { 1, rwtm->buf_phys, ALIGN(max, 4) }, + }; int ret; - if (max > 4096) - max = 4096; - - msg.command = MBOX_CMD_GET_RANDOM; - msg.args[0] = 1; - msg.args[1] = rwtm->buf_phys; - msg.args[2] = (max + 3) & ~3; + max = min(max, RWTM_DMA_BUFFER_SIZE); if (!wait) { if (!mutex_trylock(&rwtm->busy)) @@ -302,15 +275,7 @@ static int mox_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait) mutex_lock(&rwtm->busy); } - ret = mbox_send_message(rwtm->mbox, &msg); - if (ret < 0) - goto unlock_mutex; - - ret = wait_for_completion_interruptible(&rwtm->cmd_done); - if (ret < 0) - goto unlock_mutex; - - ret = mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval); + ret = mox_rwtm_exec(rwtm, MBOX_CMD_GET_RANDOM, &msg, true); if (ret < 0) goto unlock_mutex; @@ -336,19 +301,19 @@ static ssize_t do_sign_read(struct file *file, char __user *buf, size_t len, struct mox_rwtm *rwtm = file->private_data; ssize_t ret; - /* only allow one read, of 136 bytes, from position 0 */ + /* only allow one read, of whole signature, from position 0 */ if (*ppos != 0) return 0; - if (len < 136) + if (len < sizeof(rwtm->last_sig)) return -EINVAL; if (!rwtm->last_sig_done) return -ENODATA; - /* 2 arrays of 17 32-bit words are 136 bytes */ - ret = simple_read_from_buffer(buf, len, ppos, rwtm->last_sig, 136); - rwtm->last_sig_done = 0; + ret = simple_read_from_buffer(buf, len, ppos, rwtm->last_sig, + sizeof(rwtm->last_sig)); + rwtm->last_sig_done = false; return ret; } @@ -357,13 +322,11 @@ static ssize_t do_sign_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos) { struct mox_rwtm *rwtm = file->private_data; - struct armada_37xx_rwtm_rx_msg *reply = &rwtm->reply; struct armada_37xx_rwtm_tx_msg msg; loff_t dummy = 0; ssize_t ret; - /* the input is a SHA-512 hash, so exactly 64 bytes have to be read */ - if (len != 64) + if (len != SHA512_DIGEST_SIZE) return -EINVAL; /* if last result is not zero user has not read that information yet */ @@ -384,37 +347,32 @@ static ssize_t do_sign_write(struct file *file, const char __user *buf, * 3. Address of the buffer where ECDSA signature value S shall be * stored by the rWTM firmware. */ - memset(rwtm->buf, 0, 4); - ret = simple_write_to_buffer(rwtm->buf + 4, 64, &dummy, buf, len); + memset(rwtm->buf, 0, sizeof(u32)); + ret = simple_write_to_buffer(rwtm->buf + sizeof(u32), + SHA512_DIGEST_SIZE, &dummy, buf, len); if (ret < 0) goto unlock_mutex; - be32_to_cpu_array(rwtm->buf, rwtm->buf, 17); + be32_to_cpu_array(rwtm->buf, rwtm->buf, MOX_ECC_NUMBER_WORDS); - msg.command = MBOX_CMD_SIGN; msg.args[0] = 1; msg.args[1] = rwtm->buf_phys; - msg.args[2] = rwtm->buf_phys + 68; - msg.args[3] = rwtm->buf_phys + 2 * 68; - ret = mbox_send_message(rwtm->mbox, &msg); - if (ret < 0) - goto unlock_mutex; + msg.args[2] = rwtm->buf_phys + MOX_ECC_NUMBER_LEN; + msg.args[3] = rwtm->buf_phys + 2 * MOX_ECC_NUMBER_LEN; - ret = wait_for_completion_interruptible(&rwtm->cmd_done); + ret = mox_rwtm_exec(rwtm, MBOX_CMD_SIGN, &msg, true); if (ret < 0) goto unlock_mutex; - ret = MBOX_STS_VALUE(reply->retval); - if (MBOX_STS_ERROR(reply->retval) != MBOX_STS_SUCCESS) - goto unlock_mutex; - /* * Here we read the R and S values of the ECDSA signature * computed by the rWTM firmware and convert their words from * LE to BE. */ - memcpy(rwtm->last_sig, rwtm->buf + 68, 136); - cpu_to_be32_array(rwtm->last_sig, rwtm->last_sig, 34); - rwtm->last_sig_done = 1; + memcpy(rwtm->last_sig, rwtm->buf + MOX_ECC_NUMBER_LEN, + sizeof(rwtm->last_sig)); + cpu_to_be32_array(rwtm->last_sig, rwtm->last_sig, + MOX_ECC_SIGNATURE_WORDS); + rwtm->last_sig_done = true; mutex_unlock(&rwtm->busy); return len; @@ -428,45 +386,38 @@ static const struct file_operations do_sign_fops = { .open = rwtm_debug_open, .read = do_sign_read, .write = do_sign_write, - .llseek = no_llseek, }; -static int rwtm_register_debugfs(struct mox_rwtm *rwtm) +static void rwtm_debugfs_release(void *root) { - struct dentry *root, *entry; - - root = debugfs_create_dir("turris-mox-rwtm", NULL); + debugfs_remove_recursive(root); +} - if (IS_ERR(root)) - return PTR_ERR(root); +static void rwtm_register_debugfs(struct mox_rwtm *rwtm) +{ + struct dentry *root; - entry = debugfs_create_file_unsafe("do_sign", 0600, root, rwtm, - &do_sign_fops); - if (IS_ERR(entry)) - goto err_remove; + root = debugfs_create_dir("turris-mox-rwtm", NULL); - rwtm->debugfs_root = root; + debugfs_create_file_unsafe("do_sign", 0600, root, rwtm, &do_sign_fops); - return 0; -err_remove: - debugfs_remove_recursive(root); - return PTR_ERR(entry); + devm_add_action_or_reset(rwtm_dev(rwtm), rwtm_debugfs_release, root); } - -static void rwtm_unregister_debugfs(struct mox_rwtm *rwtm) +#else +static inline void rwtm_register_debugfs(struct mox_rwtm *rwtm) { - debugfs_remove_recursive(rwtm->debugfs_root); } -#else -static inline int rwtm_register_debugfs(struct mox_rwtm *rwtm) +#endif + +static void rwtm_devm_mbox_release(void *mbox) { - return 0; + mbox_free_channel(mbox); } -static inline void rwtm_unregister_debugfs(struct mox_rwtm *rwtm) +static void rwtm_firmware_symlink_drop(void *parent) { + sysfs_remove_link(parent, DRIVER_NAME); } -#endif static int turris_mox_rwtm_probe(struct platform_device *pdev) { @@ -478,40 +429,30 @@ static int turris_mox_rwtm_probe(struct platform_device *pdev) if (!rwtm) return -ENOMEM; - rwtm->dev = dev; - rwtm->buf = dmam_alloc_coherent(dev, PAGE_SIZE, &rwtm->buf_phys, - GFP_KERNEL); + rwtm->buf = dmam_alloc_coherent(dev, RWTM_DMA_BUFFER_SIZE, + &rwtm->buf_phys, GFP_KERNEL); if (!rwtm->buf) return -ENOMEM; - ret = mox_kobj_create(rwtm); - if (ret < 0) { - dev_err(dev, "Cannot create turris-mox-rwtm kobject!\n"); - return ret; - } - - ret = sysfs_create_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs); - if (ret < 0) { - dev_err(dev, "Cannot create sysfs files!\n"); - goto put_kobj; - } - platform_set_drvdata(pdev, rwtm); - mutex_init(&rwtm->busy); + ret = devm_mutex_init(dev, &rwtm->busy); + if (ret) + return ret; + init_completion(&rwtm->cmd_done); rwtm->mbox_client.dev = dev; rwtm->mbox_client.rx_callback = mox_rwtm_rx_callback; rwtm->mbox = mbox_request_channel(&rwtm->mbox_client, 0); - if (IS_ERR(rwtm->mbox)) { - ret = PTR_ERR(rwtm->mbox); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Cannot request mailbox channel: %i\n", - ret); - goto remove_files; - } + if (IS_ERR(rwtm->mbox)) + return dev_err_probe(dev, PTR_ERR(rwtm->mbox), + "Cannot request mailbox channel!\n"); + + ret = devm_add_action_or_reset(dev, rwtm_devm_mbox_release, rwtm->mbox); + if (ret) + return ret; ret = mox_get_board_info(rwtm); if (ret < 0) @@ -521,46 +462,30 @@ static int turris_mox_rwtm_probe(struct platform_device *pdev) if (ret < 0) { dev_notice(dev, "Firmware does not support the GET_RANDOM command\n"); - goto free_channel; + return ret; } rwtm->hwrng.name = DRIVER_NAME "_hwrng"; rwtm->hwrng.read = mox_hwrng_read; - rwtm->hwrng.priv = (unsigned long) rwtm; ret = devm_hwrng_register(dev, &rwtm->hwrng); - if (ret < 0) { - dev_err(dev, "Cannot register HWRNG: %i\n", ret); - goto free_channel; - } + if (ret) + return dev_err_probe(dev, ret, "Cannot register HWRNG!\n"); - ret = rwtm_register_debugfs(rwtm); - if (ret < 0) { - dev_err(dev, "Failed creating debugfs entries: %i\n", ret); - goto free_channel; - } + rwtm_register_debugfs(rwtm); dev_info(dev, "HWRNG successfully registered\n"); - return 0; - -free_channel: - mbox_free_channel(rwtm->mbox); -remove_files: - sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs); -put_kobj: - kobject_put(rwtm_to_kobj(rwtm)); - return ret; -} - -static void turris_mox_rwtm_remove(struct platform_device *pdev) -{ - struct mox_rwtm *rwtm = platform_get_drvdata(pdev); + /* + * For sysfs ABI compatibility, create symlink + * /sys/firmware/turris-mox-rwtm to this device's sysfs directory. + */ + ret = sysfs_create_link(firmware_kobj, &dev->kobj, DRIVER_NAME); + if (!ret) + devm_add_action_or_reset(dev, rwtm_firmware_symlink_drop, + firmware_kobj); - rwtm_unregister_debugfs(rwtm); - sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs); - kobject_put(rwtm_to_kobj(rwtm)); - mbox_free_channel(rwtm->mbox); + return 0; } static const struct of_device_id turris_mox_rwtm_match[] = { @@ -573,10 +498,10 @@ MODULE_DEVICE_TABLE(of, turris_mox_rwtm_match); static struct platform_driver turris_mox_rwtm_driver = { .probe = turris_mox_rwtm_probe, - .remove_new = turris_mox_rwtm_remove, .driver = { .name = DRIVER_NAME, .of_match_table = turris_mox_rwtm_match, + .dev_groups = turris_mox_rwtm_groups, }, }; module_platform_driver(turris_mox_rwtm_driver); |