summaryrefslogtreecommitdiffstats
path: root/drivers/isdn/hardware/mISDN/hfc_multi.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hardware/mISDN/hfc_multi.h')
-rw-r--r--drivers/isdn/hardware/mISDN/hfc_multi.h47
1 files changed, 23 insertions, 24 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
index 0c773866efc7..b0588acbb47d 100644
--- a/drivers/isdn/hardware/mISDN/hfc_multi.h
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -33,13 +33,13 @@
*/
/*
-#define MAX_FRAME_SIZE 2048
+ #define MAX_FRAME_SIZE 2048
*/
struct hfc_chan {
struct dchannel *dch; /* link if channel is a D-channel */
struct bchannel *bch; /* link if channel is a B-channel */
- int port; /* the interface port this */
+ int port; /* the interface port this */
/* channel is associated with */
int nt_timer; /* -1 if off, 0 if elapsed, >0 if running */
int los, ais, slip_tx, slip_rx, rdi; /* current alarms */
@@ -89,7 +89,7 @@ struct hfcm_hw {
#define HFC_CFG_REPORT_RDI 8 /* the card should report remote alarm */
#define HFC_CFG_DTMF 9 /* enable DTMF-detection */
#define HFC_CFG_CRC4 10 /* disable CRC-4 Multiframe mode, */
- /* use double frame instead. */
+/* use double frame instead. */
#define HFC_TYPE_E1 1 /* controller is HFC-E1 */
#define HFC_TYPE_4S 4 /* controller is HFC-4S */
@@ -109,9 +109,9 @@ struct hfcm_hw {
#define HFC_CHIP_E1CLOCK_GET 10 /* always get clock from E1 interface */
#define HFC_CHIP_E1CLOCK_PUT 11 /* always put clock from E1 interface */
#define HFC_CHIP_WATCHDOG 12 /* whether we should send signals */
- /* to the watchdog */
+/* to the watchdog */
#define HFC_CHIP_B410P 13 /* whether we have a b410p with echocan in */
- /* hw */
+/* hw */
#define HFC_CHIP_PLXSD 14 /* whether we have a Speech-Design PLX */
#define HFC_CHIP_EMBSD 15 /* whether we have a SD Embedded board */
@@ -148,26 +148,26 @@ struct hfc_multi {
int io_mode; /* selects mode */
#ifdef HFC_REGISTER_DEBUG
void (*HFC_outb)(struct hfc_multi *hc, u_char reg,
- u_char val, const char *function, int line);
+ u_char val, const char *function, int line);
void (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
- u_char val, const char *function, int line);
+ u_char val, const char *function, int line);
u_char (*HFC_inb)(struct hfc_multi *hc, u_char reg,
- const char *function, int line);
+ const char *function, int line);
u_char (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg,
- const char *function, int line);
+ const char *function, int line);
u_short (*HFC_inw)(struct hfc_multi *hc, u_char reg,
- const char *function, int line);
+ const char *function, int line);
u_short (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg,
- const char *function, int line);
+ const char *function, int line);
void (*HFC_wait)(struct hfc_multi *hc,
- const char *function, int line);
+ const char *function, int line);
void (*HFC_wait_nodebug)(struct hfc_multi *hc,
- const char *function, int line);
+ const char *function, int line);
#else
void (*HFC_outb)(struct hfc_multi *hc, u_char reg,
- u_char val);
+ u_char val);
void (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
- u_char val);
+ u_char val);
u_char (*HFC_inb)(struct hfc_multi *hc, u_char reg);
u_char (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg);
u_short (*HFC_inw)(struct hfc_multi *hc, u_char reg);
@@ -176,9 +176,9 @@ struct hfc_multi {
void (*HFC_wait_nodebug)(struct hfc_multi *hc);
#endif
void (*read_fifo)(struct hfc_multi *hc, u_char *data,
- int len);
+ int len);
void (*write_fifo)(struct hfc_multi *hc, u_char *data,
- int len);
+ int len);
u_long pci_origmembase, plx_origmembase;
void __iomem *pci_membase; /* PCI memory */
void __iomem *plx_membase; /* PLX memory */
@@ -211,10 +211,10 @@ struct hfc_multi {
/* an optical Interface */
int dslot; /* channel # of d-channel (E1) default 16 */
- u_long wdcount; /* every 500 ms we need to */
+ u_long wdcount; /* every 500 ms we need to */
/* send the watchdog a signal */
u_char wdbyte; /* watchdog toggle byte */
- u_int activity[8]; /* if there is any action on this */
+ u_int activity[8]; /* if there is any action on this */
/* port (will be cleared after */
/* showing led-states) */
int e1_state; /* keep track of last state */
@@ -268,7 +268,7 @@ struct hfc_multi {
#define PLX_DSP_RES_N PLX_GPIO8
/* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */
#define PLX_GPIOC_INIT (PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \
- | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
+ | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
/* PLX Interrupt Control/STATUS */
#define PLX_INTCSR_LINTI1_ENABLE 0x01
@@ -290,7 +290,7 @@ struct hfc_multi {
/* write only registers */
#define R_CIRM 0x00
#define R_CTRL 0x01
-#define R_BRG_PCM_CFG 0x02
+#define R_BRG_PCM_CFG 0x02
#define R_RAM_ADDR0 0x08
#define R_RAM_ADDR1 0x09
#define R_RAM_ADDR2 0x0A
@@ -687,8 +687,8 @@ struct hfc_multi {
#define V_NEG_CLK 0x08
#define V_HCLK 0x10
/*
-#define V_JATT_AUTO_DEL 0x20
-#define V_JATT_AUTO 0x40
+ #define V_JATT_AUTO_DEL 0x20
+ #define V_JATT_AUTO 0x40
*/
#define V_JATT_OFF 0x80
/* R_STATE */
@@ -1230,4 +1230,3 @@ struct hfc_register_names {
{"R_IRQ_FIFO_BL7", 0xCF},
};
#endif /* HFC_REGISTER_DEBUG */
-