25 files changed, 484 insertions, 287 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 807c875f1c2e..ff203a421863 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -113,14 +113,6 @@ config LEDS_WRAP
 	help
 	  This option enables support for the PCEngines WRAP programmable LEDs.
 
-config LEDS_ALIX2
-	tristate "LED Support for ALIX.2 and ALIX.3 series"
-	depends on LEDS_CLASS
-	depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
-	help
-	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
-	  You have to set leds-alix2.force=1 for boards with Award BIOS.
-
 config LEDS_COBALT_QUBE
 	tristate "LED Support for the Cobalt Qube series front LED"
 	depends on LEDS_CLASS
@@ -383,6 +375,18 @@ config LEDS_ASIC3
 	  cannot be used. This driver supports hardware blinking with an on+off
 	  period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
 
+config LEDS_RENESAS_TPU
+	bool "LED support for Renesas TPU"
+	depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
+	help
+	  This option enables build of the LED TPU platform driver,
+	  suitable to drive any TPU channel on newer Renesas SoCs.
+	  The driver controls the GPIO pin connected to the LED via
+	  the GPIO framework and expects the LED to be connected to
+	  a pin that can be driven in both GPIO mode and using TPU
+	  pin function. The latter to support brightness control.
+	  Brightness control is supported but hardware blinking is not.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bbfd2e367dc0..e4f6bf568880 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
 obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
 obj-$(CONFIG_LEDS_NET5501)		+= leds-net5501.o
 obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
-obj-$(CONFIG_LEDS_ALIX2)		+= leds-alix2.o
 obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
 obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
@@ -43,6 +42,7 @@ obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
+obj-$(CONFIG_LEDS_RENESAS_TPU)		+= leds-renesas-tpu.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/dell-led.c b/drivers/leds/dell-led.c
index 52590296af33..e5c57389efd6 100644
--- a/drivers/leds/dell-led.c
+++ b/drivers/leds/dell-led.c
@@ -14,6 +14,7 @@
 #include <linux/acpi.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 MODULE_AUTHOR("Louis Davis/Jim Dailey");
 MODULE_DESCRIPTION("Dell LED Control Driver");
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index dc3d3d83191a..661b692573e7 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -267,9 +267,14 @@ void led_blink_set(struct led_classdev *led_cdev,
 		   unsigned long *delay_on,
 		   unsigned long *delay_off)
 {
+	del_timer_sync(&led_cdev->blink_timer);
+
 	if (led_cdev->blink_set &&
-	    !led_cdev->blink_set(led_cdev, delay_on, delay_off))
+	    !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
+		led_cdev->blink_delay_on = *delay_on;
+		led_cdev->blink_delay_off = *delay_off;
 		return;
+	}
 
 	/* blink with 1 Hz as default if nothing specified */
 	if (!*delay_on && !*delay_off)
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 4bebae733349..6f1ff93d7cec 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -261,9 +261,12 @@ void led_trigger_register_simple(const char *name, struct led_trigger **tp)
 	if (trigger) {
 		trigger->name = name;
 		err = led_trigger_register(trigger);
-		if (err < 0)
+		if (err < 0) {
+			kfree(trigger);
+			trigger = NULL;
 			printk(KERN_WARNING "LED trigger %s failed to register"
 				" (%d)\n", name, err);
+		}
 	} else
 		printk(KERN_WARNING "LED trigger %s failed to register"
 			" (no memory)\n", name);
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 0d4c16678ace..0810604dc701 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
 
 #define LED_PWM_SHIFT		(3)
 #define LED_PWM_MASK		(0x1F)
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
deleted file mode 100644
index f59ffadf5125..000000000000
--- a/drivers/leds/leds-alix2.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * LEDs driver for PCEngines ALIX.2 and ALIX.3
- *
- * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-
-static int force = 0;
-module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
-
-#define MSR_LBAR_GPIO		0x5140000C
-#define CS5535_GPIO_SIZE	256
-
-static u32 gpio_base;
-
-static struct pci_device_id divil_pci[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS,  PCI_DEVICE_ID_NS_CS5535_ISA) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
-	{ } /* NULL entry */
-};
-MODULE_DEVICE_TABLE(pci, divil_pci);
-
-struct alix_led {
-	struct led_classdev cdev;
-	unsigned short port;
-	unsigned int on_value;
-	unsigned int off_value;
-};
-
-static void alix_led_set(struct led_classdev *led_cdev,
-			 enum led_brightness brightness)
-{
-	struct alix_led *led_dev =
-		container_of(led_cdev, struct alix_led, cdev);
-
-	if (brightness)
-		outl(led_dev->on_value, gpio_base + led_dev->port);
-	else
-		outl(led_dev->off_value, gpio_base + led_dev->port);
-}
-
-static struct alix_led alix_leds[] = {
-	{
-		.cdev = {
-			.name = "alix:1",
-			.brightness_set = alix_led_set,
-		},
-		.port = 0x00,
-		.on_value = 1 << 22,
-		.off_value = 1 << 6,
-	},
-	{
-		.cdev = {
-			.name = "alix:2",
-			.brightness_set = alix_led_set,
-		},
-		.port = 0x80,
-		.on_value = 1 << 25,
-		.off_value = 1 << 9,
-	},
-	{
-		.cdev = {
-			.name = "alix:3",
-			.brightness_set = alix_led_set,
-		},
-		.port = 0x80,
-		.on_value = 1 << 27,
-		.off_value = 1 << 11,
-	},
-};
-
-static int __init alix_led_probe(struct platform_device *pdev)
-{
-	int i;
-	int ret;
-
-	for (i = 0; i < ARRAY_SIZE(alix_leds); i++) {
-		alix_leds[i].cdev.flags |= LED_CORE_SUSPENDRESUME;
-		ret = led_classdev_register(&pdev->dev, &alix_leds[i].cdev);
-		if (ret < 0)
-			goto fail;
-	}
-	return 0;
-
-fail:
-	while (--i >= 0)
-		led_classdev_unregister(&alix_leds[i].cdev);
-	return ret;
-}
-
-static int alix_led_remove(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(alix_leds); i++)
-		led_classdev_unregister(&alix_leds[i].cdev);
-	return 0;
-}
-
-static struct platform_driver alix_led_driver = {
-	.remove = alix_led_remove,
-	.driver = {
-		.name = KBUILD_MODNAME,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init alix_present(unsigned long bios_phys,
-				const char *alix_sig,
-				size_t alix_sig_len)
-{
-	const size_t bios_len = 0x00010000;
-	const char *bios_virt;
-	const char *scan_end;
-	const char *p;
-	char name[64];
-
-	if (force) {
-		printk(KERN_NOTICE "%s: forced to skip BIOS test, "
-		       "assume system has ALIX.2 style LEDs\n",
-		       KBUILD_MODNAME);
-		return 1;
-	}
-
-	bios_virt = phys_to_virt(bios_phys);
-	scan_end = bios_virt + bios_len - (alix_sig_len + 2);
-	for (p = bios_virt; p < scan_end; p++) {
-		const char *tail;
-		char *a;
-
-		if (memcmp(p, alix_sig, alix_sig_len) != 0)
-			continue;
-
-		memcpy(name, p, sizeof(name));
-
-		/* remove the first \0 character from string */
-		a = strchr(name, '\0');
-		if (a)
-			*a = ' ';
-
-		/* cut the string at a newline */
-		a = strchr(name, '\r');
-		if (a)
-			*a = '\0';
-
-		tail = p + alix_sig_len;
-		if ((tail[0] == '2' || tail[0] == '3')) {
-			printk(KERN_INFO
-			       "%s: system is recognized as \"%s\"\n",
-			       KBUILD_MODNAME, name);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static struct platform_device *pdev;
-
-static int __init alix_pci_led_init(void)
-{
-	u32 low, hi;
-
-	if (pci_dev_present(divil_pci) == 0) {
-		printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n");
-		return -ENODEV;
-	}
-
-	/* Grab the GPIO I/O range */
-	rdmsr(MSR_LBAR_GPIO, low, hi);
-
-	/* Check the mask and whether GPIO is enabled (sanity check) */
-	if (hi != 0x0000f001) {
-		printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n");
-		return -ENODEV;
-	}
-
-	/* Mask off the IO base address */
-	gpio_base = low & 0x0000ff00;
-
-	if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) {
-		printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n");
-		return -ENODEV;
-	}
-
-	/* Set GPIO function to output */
-	outl(1 << 6, gpio_base + 0x04);
-	outl(1 << 9, gpio_base + 0x84);
-	outl(1 << 11, gpio_base + 0x84);
-
-	return 0;
-}
-
-static int __init alix_led_init(void)
-{
-	int ret = -ENODEV;
-	const char tinybios_sig[] = "PC Engines ALIX.";
-	const char coreboot_sig[] = "PC Engines\0ALIX.";
-
-	if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
-	    alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
-		ret = alix_pci_led_init();
-
-	if (ret < 0)
-		return ret;
-
-	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
-	if (!IS_ERR(pdev)) {
-		ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
-		if (ret)
-			platform_device_unregister(pdev);
-	} else
-		ret = PTR_ERR(pdev);
-
-	return ret;
-}
-
-static void __exit alix_led_exit(void)
-{
-	platform_device_unregister(pdev);
-	platform_driver_unregister(&alix_led_driver);
-	release_region(gpio_base, CS5535_GPIO_SIZE);
-}
-
-module_init(alix_led_init);
-module_exit(alix_led_exit);
-
-MODULE_AUTHOR("Constantin Baranov <const@mimas.ru>");
-MODULE_DESCRIPTION("PCEngines ALIX.2 and ALIX.3 LED driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index 22f847c890c9..48d9fe61bdfc 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -14,6 +14,7 @@
 
 #include <linux/mfd/asic3.h>
 #include <linux/mfd/core.h>
+#include <linux/module.h>
 
 /*
  *	The HTC ASIC3 LED GPIOs are inputs, not outputs.
@@ -107,9 +108,10 @@ static int __devinit asic3_led_probe(struct platform_device *pdev)
 	}
 
 	led->cdev->name = led->name;
-	led->cdev->default_trigger = led->default_trigger;
+	led->cdev->flags = LED_CORE_SUSPENDRESUME;
 	led->cdev->brightness_set = brightness_set;
 	led->cdev->blink_set = blink_set;
+	led->cdev->default_trigger = led->default_trigger;
 
 	ret = led_classdev_register(&pdev->dev, led->cdev);
 	if (ret < 0)
@@ -136,12 +138,44 @@ static int __devexit asic3_led_remove(struct platform_device *pdev)
 	return mfd_cell_disable(pdev);
 }
 
+static int asic3_led_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	int ret;
+
+	ret = 0;
+	if (cell->suspend)
+		ret = (*cell->suspend)(pdev);
+
+	return ret;
+}
+
+static int asic3_led_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	int ret;
+
+	ret = 0;
+	if (cell->resume)
+		ret = (*cell->resume)(pdev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops asic3_led_pm_ops = {
+	.suspend	= asic3_led_suspend,
+	.resume		= asic3_led_resume,
+};
+
 static struct platform_driver asic3_led_driver = {
 	.probe		= asic3_led_probe,
 	.remove		= __devexit_p(asic3_led_remove),
 	.driver		= {
 		.name	= "leds-asic3",
 		.owner	= THIS_MODULE,
+		.pm	= &asic3_led_pm_ops,
 	},
 };
 
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index c941d906bba6..109c875ea233 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -4,6 +4,7 @@
 #include <linux/io.h>
 #include <linux/atmel_pwm.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 
 struct pwmled {
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index 438d48384636..aac1c073fe7b 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <linux/export.h>
 
 #define LED_WEB		0x04
 #define LED_POWER_OFF	0x08
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index d11d05be0dee..49aceffaa5b6 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/module.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
 
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 3d8bc327a68d..399a86f2013a 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -18,6 +18,7 @@
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 
 #include <asm/gpio.h>
 
@@ -121,7 +122,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
 	}
 	led_dat->cdev.brightness_set = gpio_led_set;
 	if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
-		state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low;
+		state = !!gpio_get_value_cansleep(led_dat->gpio) ^ led_dat->active_low;
 	else
 		state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
 	led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 3dd7090a9a9b..0630e4f4b286 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -18,6 +18,7 @@
 #include <linux/led-lm3530.h>
 #include <linux/types.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 
 #define LM3530_LED_DEV "lcd-backlight"
 #define LM3530_NAME "lm3530-led"
@@ -421,7 +422,6 @@ err_class_register:
 err_reg_init:
 	regulator_put(drvdata->regulator);
 err_regulator_get:
-	i2c_set_clientdata(client, NULL);
 	kfree(drvdata);
 err_out:
 	return err;
@@ -449,7 +449,7 @@ MODULE_DEVICE_TABLE(i2c, lm3530_id);
 
 static struct i2c_driver lm3530_i2c_driver = {
 	.probe = lm3530_probe,
-	.remove = lm3530_remove,
+	.remove = __devexit_p(lm3530_remove),
 	.id_table = lm3530_id,
 	.driver = {
 		.name = LM3530_NAME,
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 1f7c10f6b7f2..80ba048889d6 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/leds.h>
 
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 9fc122c81f06..cb641f1b3342 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -97,6 +97,9 @@
 /* Status */
 #define LP5521_EXT_CLK_USED		0x08
 
+/* default R channel current register value */
+#define LP5521_REG_R_CURR_DEFAULT	0xAF
+
 struct lp5521_engine {
 	int		id;
 	u8		mode;
@@ -175,14 +178,14 @@ static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode)
 		mode = LP5521_CMD_DIRECT;
 
 	ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
+	if (ret < 0)
+		return ret;
 
 	/* set mode only for this engine */
 	engine_state &= ~(engine->engine_mask);
 	mode &= engine->engine_mask;
 	engine_state |= mode;
-	ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
-
-	return ret;
+	return lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
 }
 
 static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
@@ -643,6 +646,7 @@ static int __devinit lp5521_probe(struct i2c_client *client,
 	struct lp5521_chip		*chip;
 	struct lp5521_platform_data	*pdata;
 	int ret, i, led;
+	u8 buf;
 
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 	if (!chip)
@@ -681,6 +685,20 @@ static int __devinit lp5521_probe(struct i2c_client *client,
 				     * Exact value is not available. 10 - 20ms
 				     * appears to be enough for reset.
 				     */
+
+	/*
+	 * Make sure that the chip is reset by reading back the r channel
+	 * current reg. This is dummy read is required on some platforms -
+	 * otherwise further access to the R G B channels in the
+	 * LP5521_REG_ENABLE register will not have any effect - strange!
+	 */
+	lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
+	if (buf != LP5521_REG_R_CURR_DEFAULT) {
+		dev_err(&client->dev, "error in reseting chip\n");
+		goto fail2;
+	}
+	usleep_range(10000, 20000);
+
 	ret = lp5521_detect(client);
 
 	if (ret) {
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index 2579678f97a6..53f67b8ce55d 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct lt3593_led_data {
 	struct led_classdev cdev;
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index f369e56d6547..b3393a9f2139 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -21,13 +21,13 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/workqueue.h>
-#include <linux/mfd/mc13783.h>
+#include <linux/mfd/mc13xxx.h>
 #include <linux/slab.h>
 
 struct mc13783_led {
 	struct led_classdev	cdev;
 	struct work_struct	work;
-	struct mc13783		*master;
+	struct mc13xxx		*master;
 	enum led_brightness	new_brightness;
 	int			id;
 };
@@ -111,11 +111,11 @@ static void mc13783_led_work(struct work_struct *work)
 		break;
 	}
 
-	mc13783_lock(led->master);
+	mc13xxx_lock(led->master);
 
-	mc13783_reg_rmw(led->master, reg, mask, value);
+	mc13xxx_reg_rmw(led->master, reg, mask, value);
 
-	mc13783_unlock(led->master);
+	mc13xxx_unlock(led->master);
 }
 
 static void mc13783_led_set(struct led_classdev *led_cdev,
@@ -172,23 +172,23 @@ static int __devinit mc13783_led_setup(struct mc13783_led *led, int max_current)
 		break;
 	}
 
-	mc13783_lock(led->master);
+	mc13xxx_lock(led->master);
 
-	ret = mc13783_reg_rmw(led->master, reg, mask << shift,
+	ret = mc13xxx_reg_rmw(led->master, reg, mask << shift,
 						value << shift);
 
-	mc13783_unlock(led->master);
+	mc13xxx_unlock(led->master);
 	return ret;
 }
 
 static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
 	int ret = 0;
 	int reg = 0;
 
-	mc13783_lock(dev);
+	mc13xxx_lock(dev);
 
 	if (pdata->flags & MC13783_LED_TC1HALF)
 		reg |= MC13783_LED_C1_TC1HALF_BIT;
@@ -196,7 +196,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 	if (pdata->flags & MC13783_LED_SLEWLIMTC)
 		reg |= MC13783_LED_Cx_SLEWLIM_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
 	if (ret)
 		goto out;
 
@@ -206,7 +206,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 	if (pdata->flags & MC13783_LED_SLEWLIMBL)
 		reg |= MC13783_LED_Cx_SLEWLIM_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
 	if (ret)
 		goto out;
 
@@ -216,7 +216,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 	if (pdata->flags & MC13783_LED_TRIODE_TC1)
 		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
 	if (ret)
 		goto out;
 
@@ -226,7 +226,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 	if (pdata->flags & MC13783_LED_TRIODE_TC2)
 		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
 	if (ret)
 		goto out;
 
@@ -236,7 +236,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 	if (pdata->flags & MC13783_LED_TRIODE_TC3)
 		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
 	if (ret)
 		goto out;
 
@@ -255,17 +255,17 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 	reg |= (pdata->abref & MC13783_LED_C0_ABREF_MASK) <<
 							MC13783_LED_C0_ABREF;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
 
 out:
-	mc13783_unlock(dev);
+	mc13xxx_unlock(dev);
 	return ret;
 }
 
 static int __devinit mc13783_led_probe(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct mc13783_led_platform_data *led_cur;
+	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mc13xxx_led_platform_data *led_cur;
 	struct mc13783_led *led, *led_dat;
 	int ret, i;
 	int init_led = 0;
@@ -351,9 +351,9 @@ err_free:
 
 static int __devexit mc13783_led_remove(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct mc13783_led *led = platform_get_drvdata(pdev);
-	struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
 	int i;
 
 	for (i = 0; i < pdata->num_leds; i++) {
@@ -361,16 +361,16 @@ static int __devexit mc13783_led_remove(struct platform_device *pdev)
 		cancel_work_sync(&led[i].work);
 	}
 
-	mc13783_lock(dev);
+	mc13xxx_lock(dev);
 
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
 
-	mc13783_unlock(dev);
+	mc13xxx_unlock(dev);
 
 	kfree(led);
 	return 0;
diff --git a/drivers/leds/leds-net48xx.c b/drivers/leds/leds-net48xx.c
index 93987a12da49..f117f7326c5b 100644
--- a/drivers/leds/leds-net48xx.c
+++ b/drivers/leds/leds-net48xx.c
@@ -18,6 +18,7 @@
 #include <asm/io.h>
 #include <linux/nsc_gpio.h>
 #include <linux/scx200_gpio.h>
+#include <linux/module.h>
 
 #define DRVNAME "net48xx-led"
 #define NET48XX_ERROR_LED_GPIO	20
diff --git a/drivers/leds/leds-net5501.c b/drivers/leds/leds-net5501.c
index 7e764b8365e6..0555d4709a7c 100644
--- a/drivers/leds/leds-net5501.c
+++ b/drivers/leds/leds-net5501.c
@@ -16,6 +16,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <asm/geode.h>
 
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index f77d48d0b3e4..37b7d0cfe586 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/module.h>
 #include <mach/leds-ns2.h>
 
 /*
diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c
new file mode 100644
index 000000000000..3ee540eb127e
--- /dev/null
+++ b/drivers/leds/leds-renesas-tpu.c
@@ -0,0 +1,357 @@
+/*
+ * LED control using Renesas TPU
+ *
+ *  Copyright (C) 2011 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/printk.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/workqueue.h>
+
+enum r_tpu_pin { R_TPU_PIN_UNUSED, R_TPU_PIN_GPIO, R_TPU_PIN_GPIO_FN };
+enum r_tpu_timer { R_TPU_TIMER_UNUSED, R_TPU_TIMER_ON };
+
+struct r_tpu_priv {
+	struct led_classdev ldev;
+	void __iomem *mapbase;
+	struct clk *clk;
+	struct platform_device *pdev;
+	enum r_tpu_pin pin_state;
+	enum r_tpu_timer timer_state;
+	unsigned long min_rate;
+	unsigned int refresh_rate;
+	struct work_struct work;
+	enum led_brightness new_brightness;
+};
+
+static DEFINE_SPINLOCK(r_tpu_lock);
+
+#define TSTR -1 /* Timer start register (shared register) */
+#define TCR  0 /* Timer control register (+0x00) */
+#define TMDR 1 /* Timer mode register (+0x04) */
+#define TIOR 2 /* Timer I/O control register (+0x08) */
+#define TIER 3 /* Timer interrupt enable register (+0x0c) */
+#define TSR  4 /* Timer status register (+0x10) */
+#define TCNT 5 /* Timer counter (+0x14) */
+#define TGRA 6 /* Timer general register A (+0x18) */
+#define TGRB 7 /* Timer general register B (+0x1c) */
+#define TGRC 8 /* Timer general register C (+0x20) */
+#define TGRD 9 /* Timer general register D (+0x24) */
+
+static inline unsigned short r_tpu_read(struct r_tpu_priv *p, int reg_nr)
+{
+	struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+	void __iomem *base = p->mapbase;
+	unsigned long offs = reg_nr << 2;
+
+	if (reg_nr == TSTR)
+		return ioread16(base - cfg->channel_offset);
+
+	return ioread16(base + offs);
+}
+
+static inline void r_tpu_write(struct r_tpu_priv *p, int reg_nr,
+			       unsigned short value)
+{
+	struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+	void __iomem *base = p->mapbase;
+	unsigned long offs = reg_nr << 2;
+
+	if (reg_nr == TSTR) {
+		iowrite16(value, base - cfg->channel_offset);
+		return;
+	}
+
+	iowrite16(value, base + offs);
+}
+
+static void r_tpu_start_stop_ch(struct r_tpu_priv *p, int start)
+{
+	struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+	unsigned long flags, value;
+
+	/* start stop register shared by multiple timer channels */
+	spin_lock_irqsave(&r_tpu_lock, flags);
+	value = r_tpu_read(p, TSTR);
+
+	if (start)
+		value |= 1 << cfg->timer_bit;
+	else
+		value &= ~(1 << cfg->timer_bit);
+
+	r_tpu_write(p, TSTR, value);
+	spin_unlock_irqrestore(&r_tpu_lock, flags);
+}
+
+static int r_tpu_enable(struct r_tpu_priv *p, enum led_brightness brightness)
+{
+	struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+	int prescaler[] = { 1, 4, 16, 64 };
+	int k, ret;
+	unsigned long rate, tmp;
+
+	if (p->timer_state == R_TPU_TIMER_ON)
+		return 0;
+
+	/* wake up device and enable clock */
+	pm_runtime_get_sync(&p->pdev->dev);
+	ret = clk_enable(p->clk);
+	if (ret) {
+		dev_err(&p->pdev->dev, "cannot enable clock\n");
+		return ret;
+	}
+
+	/* make sure channel is disabled */
+	r_tpu_start_stop_ch(p, 0);
+
+	/* get clock rate after enabling it */
+	rate = clk_get_rate(p->clk);
+
+	/* pick the lowest acceptable rate */
+	for (k = 0; k < ARRAY_SIZE(prescaler); k++)
+		if ((rate / prescaler[k]) < p->min_rate)
+			break;
+
+	if (!k) {
+		dev_err(&p->pdev->dev, "clock rate mismatch\n");
+		goto err0;
+	}
+	dev_dbg(&p->pdev->dev, "rate = %lu, prescaler %u\n",
+		rate, prescaler[k - 1]);
+
+	/* clear TCNT on TGRB match, count on rising edge, set prescaler */
+	r_tpu_write(p, TCR, 0x0040 | (k - 1));
+
+	/* output 0 until TGRA, output 1 until TGRB */
+	r_tpu_write(p, TIOR, 0x0002);
+
+	rate /= prescaler[k - 1] * p->refresh_rate;
+	r_tpu_write(p, TGRB, rate);
+	dev_dbg(&p->pdev->dev, "TRGB = 0x%04lx\n", rate);
+
+	tmp = (cfg->max_brightness - brightness) * rate;
+	r_tpu_write(p, TGRA, tmp / cfg->max_brightness);
+	dev_dbg(&p->pdev->dev, "TRGA = 0x%04lx\n", tmp / cfg->max_brightness);
+
+	/* PWM mode */
+	r_tpu_write(p, TMDR, 0x0002);
+
+	/* enable channel */
+	r_tpu_start_stop_ch(p, 1);
+
+	p->timer_state = R_TPU_TIMER_ON;
+	return 0;
+ err0:
+	clk_disable(p->clk);
+	pm_runtime_put_sync(&p->pdev->dev);
+	return -ENOTSUPP;
+}
+
+static void r_tpu_disable(struct r_tpu_priv *p)
+{
+	if (p->timer_state == R_TPU_TIMER_UNUSED)
+		return;
+
+	/* disable channel */
+	r_tpu_start_stop_ch(p, 0);
+
+	/* stop clock and mark device as idle */
+	clk_disable(p->clk);
+	pm_runtime_put_sync(&p->pdev->dev);
+
+	p->timer_state = R_TPU_TIMER_UNUSED;
+}
+
+static void r_tpu_set_pin(struct r_tpu_priv *p, enum r_tpu_pin new_state,
+			  enum led_brightness brightness)
+{
+	struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+
+	if (p->pin_state == new_state) {
+		if (p->pin_state == R_TPU_PIN_GPIO)
+			gpio_set_value(cfg->pin_gpio, brightness);
+		return;
+	}
+
+	if (p->pin_state == R_TPU_PIN_GPIO)
+		gpio_free(cfg->pin_gpio);
+
+	if (p->pin_state == R_TPU_PIN_GPIO_FN)
+		gpio_free(cfg->pin_gpio_fn);
+
+	if (new_state == R_TPU_PIN_GPIO) {
+		gpio_request(cfg->pin_gpio, cfg->name);
+		gpio_direction_output(cfg->pin_gpio, !!brightness);
+	}
+	if (new_state == R_TPU_PIN_GPIO_FN)
+		gpio_request(cfg->pin_gpio_fn, cfg->name);
+
+	p->pin_state = new_state;
+}
+
+static void r_tpu_work(struct work_struct *work)
+{
+	struct r_tpu_priv *p = container_of(work, struct r_tpu_priv, work);
+	enum led_brightness brightness = p->new_brightness;
+
+	r_tpu_disable(p);
+
+	/* off and maximum are handled as GPIO pins, in between PWM */
+	if ((brightness == 0) || (brightness == p->ldev.max_brightness))
+		r_tpu_set_pin(p, R_TPU_PIN_GPIO, brightness);
+	else {
+		r_tpu_set_pin(p, R_TPU_PIN_GPIO_FN, 0);
+		r_tpu_enable(p, brightness);
+	}
+}
+
+static void r_tpu_set_brightness(struct led_classdev *ldev,
+				 enum led_brightness brightness)
+{
+	struct r_tpu_priv *p = container_of(ldev, struct r_tpu_priv, ldev);
+	p->new_brightness = brightness;
+	schedule_work(&p->work);
+}
+
+static int __devinit r_tpu_probe(struct platform_device *pdev)
+{
+	struct led_renesas_tpu_config *cfg = pdev->dev.platform_data;
+	struct r_tpu_priv *p;
+	struct resource *res;
+	int ret = -ENXIO;
+
+	if (!cfg) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		goto err0;
+	}
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get I/O memory\n");
+		goto err1;
+	}
+
+	/* map memory, let mapbase point to our channel */
+	p->mapbase = ioremap_nocache(res->start, resource_size(res));
+	if (p->mapbase == NULL) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		goto err1;
+	}
+
+	/* get hold of clock */
+	p->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(p->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		ret = PTR_ERR(p->clk);
+		goto err2;
+	}
+
+	p->pdev = pdev;
+	p->pin_state = R_TPU_PIN_UNUSED;
+	p->timer_state = R_TPU_TIMER_UNUSED;
+	p->refresh_rate = cfg->refresh_rate ? cfg->refresh_rate : 100;
+	r_tpu_set_pin(p, R_TPU_PIN_GPIO, LED_OFF);
+	platform_set_drvdata(pdev, p);
+
+	INIT_WORK(&p->work, r_tpu_work);
+
+	p->ldev.name = cfg->name;
+	p->ldev.brightness = LED_OFF;
+	p->ldev.max_brightness = cfg->max_brightness;
+	p->ldev.brightness_set = r_tpu_set_brightness;
+	p->ldev.flags |= LED_CORE_SUSPENDRESUME;
+	ret = led_classdev_register(&pdev->dev, &p->ldev);
+	if (ret < 0)
+		goto err3;
+
+	/* max_brightness may be updated by the LED core code */
+	p->min_rate = p->ldev.max_brightness * p->refresh_rate;
+
+	pm_runtime_enable(&pdev->dev);
+	return 0;
+
+ err3:
+	r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF);
+	clk_put(p->clk);
+ err2:
+	iounmap(p->mapbase);
+ err1:
+	kfree(p);
+ err0:
+	return ret;
+}
+
+static int __devexit r_tpu_remove(struct platform_device *pdev)
+{
+	struct r_tpu_priv *p = platform_get_drvdata(pdev);
+
+	r_tpu_set_brightness(&p->ldev, LED_OFF);
+	led_classdev_unregister(&p->ldev);
+	cancel_work_sync(&p->work);
+	r_tpu_disable(p);
+	r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF);
+
+	pm_runtime_disable(&pdev->dev);
+	clk_put(p->clk);
+
+	iounmap(p->mapbase);
+	kfree(p);
+	return 0;
+}
+
+static struct platform_driver r_tpu_device_driver = {
+	.probe		= r_tpu_probe,
+	.remove		= __devexit_p(r_tpu_remove),
+	.driver		= {
+		.name	= "leds-renesas-tpu",
+	}
+};
+
+static int __init r_tpu_init(void)
+{
+	return platform_driver_register(&r_tpu_device_driver);
+}
+
+static void __exit r_tpu_exit(void)
+{
+	platform_driver_unregister(&r_tpu_device_driver);
+}
+
+module_init(r_tpu_init);
+module_exit(r_tpu_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas TPU LED Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index a77771dc2e95..29f8b0f0e2c6 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -17,6 +17,7 @@
 #include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
index ef5c24140a44..b1eb34c3e81f 100644
--- a/drivers/leds/leds-wm831x-status.c
+++ b/drivers/leds/leds-wm831x-status.c
@@ -18,6 +18,7 @@
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
 #include <linux/mfd/wm831x/status.h>
+#include <linux/module.h>
 
 
 struct wm831x_status {
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index f14edd82cb00..4a1276578352 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -17,6 +17,7 @@
 #include <linux/mfd/wm8350/pmic.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 /* Microamps */
 static const int isink_cur[] = {
diff --git a/drivers/leds/leds-wrap.c b/drivers/leds/leds-wrap.c
index 2982c86ac4cf..6e21e654bb02 100644
--- a/drivers/leds/leds-wrap.c
+++ b/drivers/leds/leds-wrap.c
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <asm/io.h>
 #include <linux/scx200_gpio.h>
+#include <linux/module.h>
 
 #define DRVNAME "wrap-led"
 #define WRAP_POWER_LED_GPIO	2