diff options
Diffstat (limited to 'drivers/mtd/nand/Kconfig')
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 57 |
1 files changed, 53 insertions, 4 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index cfe288a6e853..3db77eec0ed2 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -23,6 +23,14 @@ config MTD_NAND_VERIFY_WRITE device thinks the write was successful, a bit could have been flipped accidentaly due to device wear or something else. +config MTD_NAND_ECC_SMC + bool "NAND ECC Smart Media byte order" + depends on MTD_NAND + default n + help + Software ECC according to the Smart Media Specification. + The original Linux implementation had byte 0 and 1 swapped. + config MTD_NAND_AUTCPU12 tristate "SmartMediaCard on autronix autcpu12 board" depends on MTD_NAND && ARCH_AUTCPU12 @@ -49,12 +57,24 @@ config MTD_NAND_SPIA help If you had to ask, you don't have one. Say 'N'. +config MTD_NAND_AMS_DELTA + tristate "NAND Flash device on Amstrad E3" + depends on MACH_AMS_DELTA && MTD_NAND + help + Support for NAND flash on Amstrad E3 (Delta). + config MTD_NAND_TOTO tristate "NAND Flash device on TOTO board" - depends on ARCH_OMAP && MTD_NAND + depends on ARCH_OMAP && MTD_NAND && BROKEN help Support for NAND flash on Texas Instruments Toto platform. +config MTD_NAND_TS7250 + tristate "NAND Flash device on TS-7250 board" + depends on MACH_TS72XX && MTD_NAND + help + Support for NAND flash on Technologic Systems TS-7250 platform. + config MTD_NAND_IDS tristate @@ -76,7 +96,7 @@ config MTD_NAND_RTC_FROM4 config MTD_NAND_PPCHAMELEONEVB tristate "NAND Flash device on PPChameleonEVB board" - depends on PPCHAMELEONEVB && MTD_NAND + depends on PPCHAMELEONEVB && MTD_NAND && BROKEN help This enables the NAND flash driver on the PPChameleon EVB Board. @@ -87,7 +107,7 @@ config MTD_NAND_S3C2410 This enables the NAND flash controller on the S3C2410 and S3C2440 SoCs - No board specfic support is done by this driver, each board + No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach. config MTD_NAND_S3C2410_DEBUG @@ -109,6 +129,22 @@ config MTD_NAND_S3C2410_HWECC currently not be able to switch to software, as there is no implementation for ECC method used by the S3C2410 +config MTD_NAND_NDFC + tristate "NDFC NanD Flash Controller" + depends on MTD_NAND && 44x + help + NDFC Nand Flash Controllers are integrated in EP44x SoCs + +config MTD_NAND_S3C2410_CLKSTOP + bool "S3C2410 NAND IDLE clock stop" + depends on MTD_NAND_S3C2410 + default n + help + Stop the clock to the NAND controller when there is no chip + selected to save power. This will mean there is a small delay + when the is NAND chip selected or released, but will save + approximately 5mA of power when there is nothing happening. + config MTD_NAND_DISKONCHIP tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)" depends on MTD_NAND && EXPERIMENTAL @@ -183,11 +219,24 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on MTD_NAND && ARCH_PXA +config MTD_NAND_CS553X + tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)" + depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH) + help + The CS553x companion chips for the AMD Geode processor + include NAND flash controllers with built-in hardware ECC + capabilities; enabling this option will allow you to use + these. The driver will check the MSRs to verify that the + controller is enabled for NAND, and currently requires that + the controller be in MMIO mode. + + If you say "m", the module will be called "cs553x_nand.ko". + config MTD_NAND_NANDSIM tristate "Support for NAND Flash Simulator" depends on MTD_NAND && MTD_PARTITIONS help - The simulator may simulate verious NAND flash chips for the + The simulator may simulate various NAND flash chips for the MTD nand layer. endmenu |