diff options
Diffstat (limited to 'drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c')
| -rw-r--r-- | drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 42 |
1 files changed, 33 insertions, 9 deletions
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index 3bc56517fe7a..c30b04f8fc0d 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -75,6 +75,24 @@ static const struct can_bittiming_const mcp251xfd_data_bittiming_const = { .brp_inc = 1, }; +/* The datasheet of the mcp2518fd (DS20006027B) specifies a range of + * [-64,63] for TDCO, indicating a relative TDCO. + * + * Manual tests have shown, that using a relative TDCO configuration + * results in bus off, while an absolute configuration works. + * + * For TDCO use the max value (63) from the data sheet, but 0 as the + * minimum. + */ +static const struct can_tdc_const mcp251xfd_tdc_const = { + .tdcv_min = 0, + .tdcv_max = 63, + .tdco_min = 0, + .tdco_max = 63, + .tdcf_min = 0, + .tdcf_max = 0, +}; + static const char *__mcp251xfd_get_model_str(enum mcp251xfd_model model) { switch (model) { @@ -510,8 +528,7 @@ static int mcp251xfd_set_bittiming(const struct mcp251xfd_priv *priv) { const struct can_bittiming *bt = &priv->can.bittiming; const struct can_bittiming *dbt = &priv->can.data_bittiming; - u32 val = 0; - s8 tdco; + u32 tdcmod, val = 0; int err; /* CAN Control Register @@ -575,11 +592,16 @@ static int mcp251xfd_set_bittiming(const struct mcp251xfd_priv *priv) return err; /* Transmitter Delay Compensation */ - tdco = clamp_t(int, dbt->brp * (dbt->prop_seg + dbt->phase_seg1), - -64, 63); - val = FIELD_PREP(MCP251XFD_REG_TDC_TDCMOD_MASK, - MCP251XFD_REG_TDC_TDCMOD_AUTO) | - FIELD_PREP(MCP251XFD_REG_TDC_TDCO_MASK, tdco); + if (priv->can.ctrlmode & CAN_CTRLMODE_TDC_AUTO) + tdcmod = MCP251XFD_REG_TDC_TDCMOD_AUTO; + else if (priv->can.ctrlmode & CAN_CTRLMODE_TDC_MANUAL) + tdcmod = MCP251XFD_REG_TDC_TDCMOD_MANUAL; + else + tdcmod = MCP251XFD_REG_TDC_TDCMOD_DISABLED; + + val = FIELD_PREP(MCP251XFD_REG_TDC_TDCMOD_MASK, tdcmod) | + FIELD_PREP(MCP251XFD_REG_TDC_TDCV_MASK, priv->can.tdc.tdcv) | + FIELD_PREP(MCP251XFD_REG_TDC_TDCO_MASK, priv->can.tdc.tdco); return regmap_write(priv->map_reg, MCP251XFD_REG_TDC, val); } @@ -2083,10 +2105,12 @@ static int mcp251xfd_probe(struct spi_device *spi) priv->can.do_get_berr_counter = mcp251xfd_get_berr_counter; priv->can.bittiming_const = &mcp251xfd_bittiming_const; priv->can.data_bittiming_const = &mcp251xfd_data_bittiming_const; + priv->can.tdc_const = &mcp251xfd_tdc_const; priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_BERR_REPORTING | CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO | - CAN_CTRLMODE_CC_LEN8_DLC; + CAN_CTRLMODE_CC_LEN8_DLC | CAN_CTRLMODE_TDC_AUTO | + CAN_CTRLMODE_TDC_MANUAL; set_bit(MCP251XFD_FLAGS_DOWN, priv->flags); priv->ndev = ndev; priv->spi = spi; @@ -2174,8 +2198,8 @@ static void mcp251xfd_remove(struct spi_device *spi) struct mcp251xfd_priv *priv = spi_get_drvdata(spi); struct net_device *ndev = priv->ndev; - can_rx_offload_del(&priv->offload); mcp251xfd_unregister(priv); + can_rx_offload_del(&priv->offload); spi->max_speed_hz = priv->spi_max_speed_hz_orig; free_candev(ndev); } |