summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/i825xx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/i825xx')
-rw-r--r--drivers/net/ethernet/i825xx/Kconfig27
-rw-r--r--drivers/net/ethernet/i825xx/Makefile2
-rw-r--r--drivers/net/ethernet/i825xx/eepro.c1822
-rw-r--r--drivers/net/ethernet/i825xx/eexpress.c1661
-rw-r--r--drivers/net/ethernet/i825xx/eexpress.h179
5 files changed, 0 insertions, 3691 deletions
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index b800a94fc875..16b14a93c205 100644
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -36,33 +36,6 @@ config BVME6000_NET
in your kernel.
To compile this driver as a module, choose M here.
-config EEXPRESS
- tristate "EtherExpress 16 support"
- depends on ISA
- ---help---
- If you have an EtherExpress16 network (Ethernet) card, say Y and
- read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Note that the Intel
- EtherExpress16 card used to be regarded as a very poor choice
- because the driver was very unreliable. We now have a new driver
- that should do better.
-
- To compile this driver as a module, choose M here. The module
- will be called eexpress.
-
-config EEXPRESS_PRO
- tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
- depends on ISA
- ---help---
- If you have a network (Ethernet) card of this type, say Y. This
- driver supports Intel i82595{FX,TX} based boards. Note however
- that the EtherExpress PRO/100 Ethernet card has its own separate
- driver. Please read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called eepro.
-
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile
index bc81e14ed5bd..4267ae72c5d2 100644
--- a/drivers/net/ethernet/i825xx/Makefile
+++ b/drivers/net/ethernet/i825xx/Makefile
@@ -3,8 +3,6 @@
#
obj-$(CONFIG_ARM_ETHER1) += ether1.o
-obj-$(CONFIG_EEXPRESS) += eexpress.o
-obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_NI52) += ni52.o
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
obj-$(CONFIG_ZNET) += znet.o
diff --git a/drivers/net/ethernet/i825xx/eepro.c b/drivers/net/ethernet/i825xx/eepro.c
deleted file mode 100644
index 7f49fd54c521..000000000000
--- a/drivers/net/ethernet/i825xx/eepro.c
+++ /dev/null
@@ -1,1822 +0,0 @@
-/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */
-/*
- Written 1994, 1995,1996 by Bao C. Ha.
-
- Copyright (C) 1994, 1995,1996 by Bao C. Ha.
-
- This software may be used and distributed
- according to the terms of the GNU General Public License,
- incorporated herein by reference.
-
- The author may be reached at bao.ha@srs.gov
- or 418 Hastings Place, Martinez, GA 30907.
-
- Things remaining to do:
- Better record keeping of errors.
- Eliminate transmit interrupt to reduce overhead.
- Implement "concurrent processing". I won't be doing it!
-
- Bugs:
-
- If you have a problem of not detecting the 82595 during a
- reboot (warm reset), disable the FLASH memory should fix it.
- This is a compatibility hardware problem.
-
- Versions:
- 0.13b basic ethtool support (aris, 09/13/2004)
- 0.13a in memory shortage, drop packets also in board
- (Michael Westermann <mw@microdata-pos.de>, 07/30/2002)
- 0.13 irq sharing, rewrote probe function, fixed a nasty bug in
- hardware_send_packet and a major cleanup (aris, 11/08/2001)
- 0.12d fixing a problem with single card detected as eight eth devices
- fixing a problem with sudden drop in card performance
- (chris (asdn@go2.pl), 10/29/2001)
- 0.12c fixing some problems with old cards (aris, 01/08/2001)
- 0.12b misc fixes (aris, 06/26/2000)
- 0.12a port of version 0.12a of 2.2.x kernels to 2.3.x
- (aris (aris@conectiva.com.br), 05/19/2000)
- 0.11e some tweaks about multiple cards support (PdP, jul/aug 1999)
- 0.11d added __initdata, __init stuff; call spin_lock_init
- in eepro_probe1. Replaced "eepro" by dev->name. Augmented
- the code protected by spin_lock in interrupt routine
- (PdP, 12/12/1998)
- 0.11c minor cleanup (PdP, RMC, 09/12/1998)
- 0.11b Pascal Dupuis (dupuis@lei.ucl.ac.be): works as a module
- under 2.1.xx. Debug messages are flagged as KERN_DEBUG to
- avoid console flooding. Added locking at critical parts. Now
- the dawn thing is SMP safe.
- 0.11a Attempt to get 2.1.xx support up (RMC)
- 0.11 Brian Candler added support for multiple cards. Tested as
- a module, no idea if it works when compiled into kernel.
-
- 0.10e Rick Bressler notified me that ifconfig up;ifconfig down fails
- because the irq is lost somewhere. Fixed that by moving
- request_irq and free_irq to eepro_open and eepro_close respectively.
- 0.10d Ugh! Now Wakeup works. Was seriously broken in my first attempt.
- I'll need to find a way to specify an ioport other than
- the default one in the PnP case. PnP definitively sucks.
- And, yes, this is not the only reason.
- 0.10c PnP Wakeup Test for 595FX. uncomment #define PnPWakeup;
- to use.
- 0.10b Should work now with (some) Pro/10+. At least for
- me (and my two cards) it does. _No_ guarantee for
- function with non-Pro/10+ cards! (don't have any)
- (RMC, 9/11/96)
-
- 0.10 Added support for the Etherexpress Pro/10+. The
- IRQ map was changed significantly from the old
- pro/10. The new interrupt map was provided by
- Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu).
- (BCH, 9/3/96)
-
- 0.09 Fixed a race condition in the transmit algorithm,
- which causes crashes under heavy load with fast
- pentium computers. The performance should also
- improve a bit. The size of RX buffer, and hence
- TX buffer, can also be changed via lilo or insmod.
- (BCH, 7/31/96)
-
- 0.08 Implement 32-bit I/O for the 82595TX and 82595FX
- based lan cards. Disable full-duplex mode if TPE
- is not used. (BCH, 4/8/96)
-
- 0.07a Fix a stat report which counts every packet as a
- heart-beat failure. (BCH, 6/3/95)
-
- 0.07 Modified to support all other 82595-based lan cards.
- The IRQ vector of the EtherExpress Pro will be set
- according to the value saved in the EEPROM. For other
- cards, I will do autoirq_request() to grab the next
- available interrupt vector. (BCH, 3/17/95)
-
- 0.06a,b Interim released. Minor changes in the comments and
- print out format. (BCH, 3/9/95 and 3/14/95)
-
- 0.06 First stable release that I am comfortable with. (BCH,
- 3/2/95)
-
- 0.05 Complete testing of multicast. (BCH, 2/23/95)
-
- 0.04 Adding multicast support. (BCH, 2/14/95)
-
- 0.03 First widely alpha release for public testing.
- (BCH, 2/14/95)
-
-*/
-
-static const char version[] =
- "eepro.c: v0.13b 09/13/2004 aris@cathedrallabs.org\n";
-
-#include <linux/module.h>
-
-/*
- Sources:
-
- This driver wouldn't have been written without the availability
- of the Crynwr's Lan595 driver source code. It helps me to
- familiarize with the 82595 chipset while waiting for the Intel
- documentation. I also learned how to detect the 82595 using
- the packet driver's technique.
-
- This driver is written by cutting and pasting the skeleton.c driver
- provided by Donald Becker. I also borrowed the EEPROM routine from
- Donald Becker's 82586 driver.
-
- Datasheet for the Intel 82595 (including the TX and FX version). It
- provides just enough info that the casual reader might think that it
- documents the i82595.
-
- The User Manual for the 82595. It provides a lot of the missing
- information.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <linux/ethtool.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#define DRV_NAME "eepro"
-#define DRV_VERSION "0.13c"
-
-#define compat_dev_kfree_skb( skb, mode ) dev_kfree_skb( (skb) )
-/* I had reports of looong delays with SLOW_DOWN defined as udelay(2) */
-#define SLOW_DOWN inb(0x80)
-/* udelay(2) */
-#define compat_init_data __initdata
-enum iftype { AUI=0, BNC=1, TPE=2 };
-
-/* First, a few definitions that the brave might change. */
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int eepro_portlist[] compat_init_data =
- { 0x300, 0x210, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0};
-/* note: 0x300 is default, the 595FX supports ALL IO Ports
- from 0x000 to 0x3F0, some of which are reserved in PCs */
-
-/* To try the (not-really PnP Wakeup: */
-/*
-#define PnPWakeup
-*/
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-static unsigned int net_debug = NET_DEBUG;
-
-/* The number of low I/O ports used by the ethercard. */
-#define EEPRO_IO_EXTENT 16
-
-/* Different 82595 chips */
-#define LAN595 0
-#define LAN595TX 1
-#define LAN595FX 2
-#define LAN595FX_10ISA 3
-
-/* Information that need to be kept for each board. */
-struct eepro_local {
- unsigned rx_start;
- unsigned tx_start; /* start of the transmit chain */
- int tx_last; /* pointer to last packet in the transmit chain */
- unsigned tx_end; /* end of the transmit chain (plus 1) */
- int eepro; /* 1 for the EtherExpress Pro/10,
- 2 for the EtherExpress Pro/10+,
- 3 for the EtherExpress 10 (blue cards),
- 0 for other 82595-based lan cards. */
- int version; /* a flag to indicate if this is a TX or FX
- version of the 82595 chip. */
- int stepping;
-
- spinlock_t lock; /* Serializing lock */
-
- unsigned rcv_ram; /* pre-calculated space for rx */
- unsigned xmt_ram; /* pre-calculated space for tx */
- unsigned char xmt_bar;
- unsigned char xmt_lower_limit_reg;
- unsigned char xmt_upper_limit_reg;
- short xmt_lower_limit;
- short xmt_upper_limit;
- short rcv_lower_limit;
- short rcv_upper_limit;
- unsigned char eeprom_reg;
- unsigned short word[8];
-};
-
-/* The station (ethernet) address prefix, used for IDing the board. */
-#define SA_ADDR0 0x00 /* Etherexpress Pro/10 */
-#define SA_ADDR1 0xaa
-#define SA_ADDR2 0x00
-
-#define GetBit(x,y) ((x & (1<<y))>>y)
-
-/* EEPROM Word 0: */
-#define ee_PnP 0 /* Plug 'n Play enable bit */
-#define ee_Word1 1 /* Word 1? */
-#define ee_BusWidth 2 /* 8/16 bit */
-#define ee_FlashAddr 3 /* Flash Address */
-#define ee_FlashMask 0x7 /* Mask */
-#define ee_AutoIO 6 /* */
-#define ee_reserved0 7 /* =0! */
-#define ee_Flash 8 /* Flash there? */
-#define ee_AutoNeg 9 /* Auto Negotiation enabled? */
-#define ee_IO0 10 /* IO Address LSB */
-#define ee_IO0Mask 0x /*...*/
-#define ee_IO1 15 /* IO MSB */
-
-/* EEPROM Word 1: */
-#define ee_IntSel 0 /* Interrupt */
-#define ee_IntMask 0x7
-#define ee_LI 3 /* Link Integrity 0= enabled */
-#define ee_PC 4 /* Polarity Correction 0= enabled */
-#define ee_TPE_AUI 5 /* PortSelection 1=TPE */
-#define ee_Jabber 6 /* Jabber prevention 0= enabled */
-#define ee_AutoPort 7 /* Auto Port Selection 1= Disabled */
-#define ee_SMOUT 8 /* SMout Pin Control 0= Input */
-#define ee_PROM 9 /* Flash EPROM / PROM 0=Flash */
-#define ee_reserved1 10 /* .. 12 =0! */
-#define ee_AltReady 13 /* Alternate Ready, 0=normal */
-#define ee_reserved2 14 /* =0! */
-#define ee_Duplex 15
-
-/* Word2,3,4: */
-#define ee_IA5 0 /*bit start for individual Addr Byte 5 */
-#define ee_IA4 8 /*bit start for individual Addr Byte 5 */
-#define ee_IA3 0 /*bit start for individual Addr Byte 5 */
-#define ee_IA2 8 /*bit start for individual Addr Byte 5 */
-#define ee_IA1 0 /*bit start for individual Addr Byte 5 */
-#define ee_IA0 8 /*bit start for individual Addr Byte 5 */
-
-/* Word 5: */
-#define ee_BNC_TPE 0 /* 0=TPE */
-#define ee_BootType 1 /* 00=None, 01=IPX, 10=ODI, 11=NDIS */
-#define ee_BootTypeMask 0x3
-#define ee_NumConn 3 /* Number of Connections 0= One or Two */
-#define ee_FlashSock 4 /* Presence of Flash Socket 0= Present */
-#define ee_PortTPE 5
-#define ee_PortBNC 6
-#define ee_PortAUI 7
-#define ee_PowerMgt 10 /* 0= disabled */
-#define ee_CP 13 /* Concurrent Processing */
-#define ee_CPMask 0x7
-
-/* Word 6: */
-#define ee_Stepping 0 /* Stepping info */
-#define ee_StepMask 0x0F
-#define ee_BoardID 4 /* Manucaturer Board ID, reserved */
-#define ee_BoardMask 0x0FFF
-
-/* Word 7: */
-#define ee_INT_TO_IRQ 0 /* int to IRQ Mapping = 0x1EB8 for Pro/10+ */
-#define ee_FX_INT2IRQ 0x1EB8 /* the _only_ mapping allowed for FX chips */
-
-/*..*/
-#define ee_SIZE 0x40 /* total EEprom Size */
-#define ee_Checksum 0xBABA /* initial and final value for adding checksum */
-
-
-/* Card identification via EEprom: */
-#define ee_addr_vendor 0x10 /* Word offset for EISA Vendor ID */
-#define ee_addr_id 0x11 /* Word offset for Card ID */
-#define ee_addr_SN 0x12 /* Serial Number */
-#define ee_addr_CRC_8 0x14 /* CRC over last thee Bytes */
-
-
-#define ee_vendor_intel0 0x25 /* Vendor ID Intel */
-#define ee_vendor_intel1 0xD4
-#define ee_id_eepro10p0 0x10 /* ID for eepro/10+ */
-#define ee_id_eepro10p1 0x31
-
-#define TX_TIMEOUT ((4*HZ)/10)
-
-/* Index to functions, as function prototypes. */
-
-static int eepro_probe1(struct net_device *dev, int autoprobe);
-static int eepro_open(struct net_device *dev);
-static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
- struct net_device *dev);
-static irqreturn_t eepro_interrupt(int irq, void *dev_id);
-static void eepro_rx(struct net_device *dev);
-static void eepro_transmit_interrupt(struct net_device *dev);
-static int eepro_close(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void eepro_tx_timeout (struct net_device *dev);
-
-static int read_eeprom(int ioaddr, int location, struct net_device *dev);
-static int hardware_send_packet(struct net_device *dev, void *buf, short length);
-static int eepro_grab_irq(struct net_device *dev);
-
-/*
- Details of the i82595.
-
-You will need either the datasheet or the user manual to understand what
-is going on here. The 82595 is very different from the 82586, 82593.
-
-The receive algorithm in eepro_rx() is just an implementation of the
-RCV ring structure that the Intel 82595 imposes at the hardware level.
-The receive buffer is set at 24K, and the transmit buffer is 8K. I
-am assuming that the total buffer memory is 32K, which is true for the
-Intel EtherExpress Pro/10. If it is less than that on a generic card,
-the driver will be broken.
-
-The transmit algorithm in the hardware_send_packet() is similar to the
-one in the eepro_rx(). The transmit buffer is a ring linked list.
-I just queue the next available packet to the end of the list. In my
-system, the 82595 is so fast that the list seems to always contain a
-single packet. In other systems with faster computers and more congested
-network traffics, the ring linked list should improve performance by
-allowing up to 8K worth of packets to be queued.
-
-The sizes of the receive and transmit buffers can now be changed via lilo
-or insmod. Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0"
-where rx-buffer is in KB unit. Modules uses the parameter mem which is
-also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer."
-The receive buffer has to be more than 3K or less than 29K. Otherwise,
-it is reset to the default of 24K, and, hence, 8K for the trasnmit
-buffer (transmit-buffer = 32K - receive-buffer).
-
-*/
-#define RAM_SIZE 0x8000
-
-#define RCV_HEADER 8
-#define RCV_DEFAULT_RAM 0x6000
-
-#define XMT_HEADER 8
-#define XMT_DEFAULT_RAM (RAM_SIZE - RCV_DEFAULT_RAM)
-
-#define XMT_START_PRO RCV_DEFAULT_RAM
-#define XMT_START_10 0x0000
-#define RCV_START_PRO 0x0000
-#define RCV_START_10 XMT_DEFAULT_RAM
-
-#define RCV_DONE 0x0008
-#define RX_OK 0x2000
-#define RX_ERROR 0x0d81
-
-#define TX_DONE_BIT 0x0080
-#define TX_OK 0x2000
-#define CHAIN_BIT 0x8000
-#define XMT_STATUS 0x02
-#define XMT_CHAIN 0x04
-#define XMT_COUNT 0x06
-
-#define BANK0_SELECT 0x00
-#define BANK1_SELECT 0x40
-#define BANK2_SELECT 0x80
-
-/* Bank 0 registers */
-#define COMMAND_REG 0x00 /* Register 0 */
-#define MC_SETUP 0x03
-#define XMT_CMD 0x04
-#define DIAGNOSE_CMD 0x07
-#define RCV_ENABLE_CMD 0x08
-#define RCV_DISABLE_CMD 0x0a
-#define STOP_RCV_CMD 0x0b
-#define RESET_CMD 0x0e
-#define POWER_DOWN_CMD 0x18
-#define RESUME_XMT_CMD 0x1c
-#define SEL_RESET_CMD 0x1e
-#define STATUS_REG 0x01 /* Register 1 */
-#define RX_INT 0x02
-#define TX_INT 0x04
-#define EXEC_STATUS 0x30
-#define ID_REG 0x02 /* Register 2 */
-#define R_ROBIN_BITS 0xc0 /* round robin counter */
-#define ID_REG_MASK 0x2c
-#define ID_REG_SIG 0x24
-#define AUTO_ENABLE 0x10
-#define INT_MASK_REG 0x03 /* Register 3 */
-#define RX_STOP_MASK 0x01
-#define RX_MASK 0x02
-#define TX_MASK 0x04
-#define EXEC_MASK 0x08
-#define ALL_MASK 0x0f
-#define IO_32_BIT 0x10
-#define RCV_BAR 0x04 /* The following are word (16-bit) registers */
-#define RCV_STOP 0x06
-
-#define XMT_BAR_PRO 0x0a
-#define XMT_BAR_10 0x0b
-
-#define HOST_ADDRESS_REG 0x0c
-#define IO_PORT 0x0e
-#define IO_PORT_32_BIT 0x0c
-
-/* Bank 1 registers */
-#define REG1 0x01
-#define WORD_WIDTH 0x02
-#define INT_ENABLE 0x80
-#define INT_NO_REG 0x02
-#define RCV_LOWER_LIMIT_REG 0x08
-#define RCV_UPPER_LIMIT_REG 0x09
-
-#define XMT_LOWER_LIMIT_REG_PRO 0x0a
-#define XMT_UPPER_LIMIT_REG_PRO 0x0b
-#define XMT_LOWER_LIMIT_REG_10 0x0b
-#define XMT_UPPER_LIMIT_REG_10 0x0a
-
-/* Bank 2 registers */
-#define XMT_Chain_Int 0x20 /* Interrupt at the end of the transmit chain */
-#define XMT_Chain_ErrStop 0x40 /* Interrupt at the end of the chain even if there are errors */
-#define RCV_Discard_BadFrame 0x80 /* Throw bad frames away, and continue to receive others */
-#define REG2 0x02
-#define PRMSC_Mode 0x01
-#define Multi_IA 0x20
-#define REG3 0x03
-#define TPE_BIT 0x04
-#define BNC_BIT 0x20
-#define REG13 0x0d
-#define FDX 0x00
-#define A_N_ENABLE 0x02
-
-#define I_ADD_REG0 0x04
-#define I_ADD_REG1 0x05
-#define I_ADD_REG2 0x06
-#define I_ADD_REG3 0x07
-#define I_ADD_REG4 0x08
-#define I_ADD_REG5 0x09
-
-#define EEPROM_REG_PRO 0x0a
-#define EEPROM_REG_10 0x0b
-
-#define EESK 0x01
-#define EECS 0x02
-#define EEDI 0x04
-#define EEDO 0x08
-
-/* do a full reset */
-#define eepro_reset(ioaddr) outb(RESET_CMD, ioaddr)
-
-/* do a nice reset */
-#define eepro_sel_reset(ioaddr) { \
- outb(SEL_RESET_CMD, ioaddr); \
- SLOW_DOWN; \
- SLOW_DOWN; \
- }
-
-/* disable all interrupts */
-#define eepro_dis_int(ioaddr) outb(ALL_MASK, ioaddr + INT_MASK_REG)
-
-/* clear all interrupts */
-#define eepro_clear_int(ioaddr) outb(ALL_MASK, ioaddr + STATUS_REG)
-
-/* enable tx/rx */
-#define eepro_en_int(ioaddr) outb(ALL_MASK & ~(RX_MASK | TX_MASK), \
- ioaddr + INT_MASK_REG)
-
-/* enable exec event interrupt */
-#define eepro_en_intexec(ioaddr) outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG)
-
-/* enable rx */
-#define eepro_en_rx(ioaddr) outb(RCV_ENABLE_CMD, ioaddr)
-
-/* disable rx */
-#define eepro_dis_rx(ioaddr) outb(RCV_DISABLE_CMD, ioaddr)
-
-/* switch bank */
-#define eepro_sw2bank0(ioaddr) outb(BANK0_SELECT, ioaddr)
-#define eepro_sw2bank1(ioaddr) outb(BANK1_SELECT, ioaddr)
-#define eepro_sw2bank2(ioaddr) outb(BANK2_SELECT, ioaddr)
-
-/* enable interrupt line */
-#define eepro_en_intline(ioaddr) outb(inb(ioaddr + REG1) | INT_ENABLE,\
- ioaddr + REG1)
-
-/* disable interrupt line */
-#define eepro_dis_intline(ioaddr) outb(inb(ioaddr + REG1) & 0x7f, \
- ioaddr + REG1);
-
-/* set diagnose flag */
-#define eepro_diag(ioaddr) outb(DIAGNOSE_CMD, ioaddr)
-
-/* ack for rx int */
-#define eepro_ack_rx(ioaddr) outb (RX_INT, ioaddr + STATUS_REG)
-
-/* ack for tx int */
-#define eepro_ack_tx(ioaddr) outb (TX_INT, ioaddr + STATUS_REG)
-
-/* a complete sel reset */
-#define eepro_complete_selreset(ioaddr) { \
- dev->stats.tx_errors++;\
- eepro_sel_reset(ioaddr);\
- lp->tx_end = \
- lp->xmt_lower_limit;\
- lp->tx_start = lp->tx_end;\
- lp->tx_last = 0;\
- dev->trans_start = jiffies;\
- netif_wake_queue(dev);\
- eepro_en_rx(ioaddr);\
- }
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
- If dev->base_addr == 0, probe all likely locations.
- If dev->base_addr == 1, always return failure.
- If dev->base_addr == 2, allocate space for the device and return success
- (detachable devices only).
- */
-static int __init do_eepro_probe(struct net_device *dev)
-{
- int i;
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
-#ifdef PnPWakeup
- /* XXXX for multiple cards should this only be run once? */
-
- /* Wakeup: */
- #define WakeupPort 0x279
- #define WakeupSeq {0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,\
- 0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,\
- 0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,\
- 0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43}
-
- {
- unsigned short int WS[32]=WakeupSeq;
-
- if (request_region(WakeupPort, 2, "eepro wakeup")) {
- if (net_debug>5)
- printk(KERN_DEBUG "Waking UP\n");
-
- outb_p(0,WakeupPort);
- outb_p(0,WakeupPort);
- for (i=0; i<32; i++) {
- outb_p(WS[i],WakeupPort);
- if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]);
- }
-
- release_region(WakeupPort, 2);
- } else
- printk(KERN_WARNING "PnP wakeup region busy!\n");
- }
-#endif
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return eepro_probe1(dev, 0);
-
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (i = 0; eepro_portlist[i]; i++) {
- dev->base_addr = eepro_portlist[i];
- dev->irq = irq;
- if (eepro_probe1(dev, 1) == 0)
- return 0;
- }
-
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init eepro_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct eepro_local));
- int err;
-
- if (!dev)
- return ERR_PTR(-ENODEV);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_eepro_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static void __init printEEPROMInfo(struct net_device *dev)
-{
- struct eepro_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
- unsigned short Word;
- int i,j;
-
- j = ee_Checksum;
- for (i = 0; i < 8; i++)
- j += lp->word[i];
- for ( ; i < ee_SIZE; i++)
- j += read_eeprom(ioaddr, i, dev);
-
- printk(KERN_DEBUG "Checksum: %#x\n",j&0xffff);
-
- Word = lp->word[0];
- printk(KERN_DEBUG "Word0:\n");
- printk(KERN_DEBUG " Plug 'n Pray: %d\n",GetBit(Word,ee_PnP));
- printk(KERN_DEBUG " Buswidth: %d\n",(GetBit(Word,ee_BusWidth)+1)*8 );
- printk(KERN_DEBUG " AutoNegotiation: %d\n",GetBit(Word,ee_AutoNeg));
- printk(KERN_DEBUG " IO Address: %#x\n", (Word>>ee_IO0)<<4);
-
- if (net_debug>4) {
- Word = lp->word[1];
- printk(KERN_DEBUG "Word1:\n");
- printk(KERN_DEBUG " INT: %d\n", Word & ee_IntMask);
- printk(KERN_DEBUG " LI: %d\n", GetBit(Word,ee_LI));
- printk(KERN_DEBUG " PC: %d\n", GetBit(Word,ee_PC));
- printk(KERN_DEBUG " TPE/AUI: %d\n", GetBit(Word,ee_TPE_AUI));
- printk(KERN_DEBUG " Jabber: %d\n", GetBit(Word,ee_Jabber));
- printk(KERN_DEBUG " AutoPort: %d\n", !GetBit(Word,ee_AutoPort));
- printk(KERN_DEBUG " Duplex: %d\n", GetBit(Word,ee_Duplex));
- }
-
- Word = lp->word[5];
- printk(KERN_DEBUG "Word5:\n");
- printk(KERN_DEBUG " BNC: %d\n",GetBit(Word,ee_BNC_TPE));
- printk(KERN_DEBUG " NumConnectors: %d\n",GetBit(Word,ee_NumConn));
- printk(KERN_DEBUG " Has ");
- if (GetBit(Word,ee_PortTPE)) printk(KERN_DEBUG "TPE ");
- if (GetBit(Word,ee_PortBNC)) printk(KERN_DEBUG "BNC ");
- if (GetBit(Word,ee_PortAUI)) printk(KERN_DEBUG "AUI ");
- printk(KERN_DEBUG "port(s)\n");
-
- Word = lp->word[6];
- printk(KERN_DEBUG "Word6:\n");
- printk(KERN_DEBUG " Stepping: %d\n",Word & ee_StepMask);
- printk(KERN_DEBUG " BoardID: %d\n",Word>>ee_BoardID);
-
- Word = lp->word[7];
- printk(KERN_DEBUG "Word7:\n");
- printk(KERN_DEBUG " INT to IRQ:\n");
-
- for (i=0, j=0; i<15; i++)
- if (GetBit(Word,i)) printk(KERN_DEBUG " INT%d -> IRQ %d;",j++,i);
-
- printk(KERN_DEBUG "\n");
-}
-
-/* function to recalculate the limits of buffer based on rcv_ram */
-static void eepro_recalc (struct net_device *dev)
-{
- struct eepro_local * lp;
-
- lp = netdev_priv(dev);
- lp->xmt_ram = RAM_SIZE - lp->rcv_ram;
-
- if (lp->eepro == LAN595FX_10ISA) {
- lp->xmt_lower_limit = XMT_START_10;
- lp->xmt_upper_limit = (lp->xmt_ram - 2);
- lp->rcv_lower_limit = lp->xmt_ram;
- lp->rcv_upper_limit = (RAM_SIZE - 2);
- }
- else {
- lp->rcv_lower_limit = RCV_START_PRO;
- lp->rcv_upper_limit = (lp->rcv_ram - 2);
- lp->xmt_lower_limit = lp->rcv_ram;
- lp->xmt_upper_limit = (RAM_SIZE - 2);
- }
-}
-
-/* prints boot-time info */
-static void __init eepro_print_info (struct net_device *dev)
-{
- struct eepro_local * lp = netdev_priv(dev);
- int i;
- const char * ifmap[] = {"AUI", "10Base2", "10BaseT"};
-
- i = inb(dev->base_addr + ID_REG);
- printk(KERN_DEBUG " id: %#x ",i);
- printk(" io: %#x ", (unsigned)dev->base_addr);
-
- switch (lp->eepro) {
- case LAN595FX_10ISA:
- printk("%s: Intel EtherExpress 10 ISA\n at %#x,",
- dev->name, (unsigned)dev->base_addr);
- break;
- case LAN595FX:
- printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
- dev->name, (unsigned)dev->base_addr);
- break;
- case LAN595TX:
- printk("%s: Intel EtherExpress Pro/10 ISA at %#x,",
- dev->name, (unsigned)dev->base_addr);
- break;
- case LAN595:
- printk("%s: Intel 82595-based lan card at %#x,",
- dev->name, (unsigned)dev->base_addr);
- break;
- }
-
- printk(" %pM", dev->dev_addr);
-
- if (net_debug > 3)
- printk(KERN_DEBUG ", %dK RCV buffer",
- (int)(lp->rcv_ram)/1024);
-
- if (dev->irq > 2)
- printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]);
- else
- printk(", %s.\n", ifmap[dev->if_port]);
-
- if (net_debug > 3) {
- i = lp->word[5];
- if (i & 0x2000) /* bit 13 of EEPROM word 5 */
- printk(KERN_DEBUG "%s: Concurrent Processing is "
- "enabled but not used!\n", dev->name);
- }
-
- /* Check the station address for the manufacturer's code */
- if (net_debug>3)
- printEEPROMInfo(dev);
-}
-
-static const struct ethtool_ops eepro_ethtool_ops;
-
-static const struct net_device_ops eepro_netdev_ops = {
- .ndo_open = eepro_open,
- .ndo_stop = eepro_close,
- .ndo_start_xmit = eepro_send_packet,
- .ndo_set_rx_mode = set_multicast_list,
- .ndo_tx_timeout = eepro_tx_timeout,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-/* This is the real probe routine. Linux has a history of friendly device
- probes on the ISA bus. A good device probe avoids doing writes, and
- verifies that the correct device exists and functions. */
-
-static int __init eepro_probe1(struct net_device *dev, int autoprobe)
-{
- unsigned short station_addr[3], id, counter;
- int i;
- struct eepro_local *lp;
- int ioaddr = dev->base_addr;
- int err;
-
- /* Grab the region so we can find another board if autoIRQ fails. */
- if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
- if (!autoprobe)
- printk(KERN_WARNING "EEPRO: io-port 0x%04x in use\n",
- ioaddr);
- return -EBUSY;
- }
-
- /* Now, we are going to check for the signature of the
- ID_REG (register 2 of bank 0) */
-
- id = inb(ioaddr + ID_REG);
-
- if ((id & ID_REG_MASK) != ID_REG_SIG)
- goto exit;
-
- /* We seem to have the 82595 signature, let's
- play with its counter (last 2 bits of
- register 2 of bank 0) to be sure. */
-
- counter = id & R_ROBIN_BITS;
-
- if ((inb(ioaddr + ID_REG) & R_ROBIN_BITS) != (counter + 0x40))
- goto exit;
-
- lp = netdev_priv(dev);
- memset(lp, 0, sizeof(struct eepro_local));
- lp->xmt_bar = XMT_BAR_PRO;
- lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_PRO;
- lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_PRO;
- lp->eeprom_reg = EEPROM_REG_PRO;
- spin_lock_init(&lp->lock);
-
- /* Now, get the ethernet hardware address from
- the EEPROM */
- station_addr[0] = read_eeprom(ioaddr, 2, dev);
-
- /* FIXME - find another way to know that we've found
- * an Etherexpress 10
- */
- if (station_addr[0] == 0x0000 || station_addr[0] == 0xffff) {
- lp->eepro = LAN595FX_10ISA;
- lp->eeprom_reg = EEPROM_REG_10;
- lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_10;
- lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_10;
- lp->xmt_bar = XMT_BAR_10;
- station_addr[0] = read_eeprom(ioaddr, 2, dev);
- }
-
- /* get all words at once. will be used here and for ethtool */
- for (i = 0; i < 8; i++) {
- lp->word[i] = read_eeprom(ioaddr, i, dev);
- }
- station_addr[1] = lp->word[3];
- station_addr[2] = lp->word[4];
-
- if (!lp->eepro) {
- if (lp->word[7] == ee_FX_INT2IRQ)
- lp->eepro = 2;
- else if (station_addr[2] == SA_ADDR1)
- lp->eepro = 1;
- }
-
- /* Fill in the 'dev' fields. */
- for (i=0; i < 6; i++)
- dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i];
-
- /* RX buffer must be more than 3K and less than 29K */
- if (dev->mem_end < 3072 || dev->mem_end > 29696)
- lp->rcv_ram = RCV_DEFAULT_RAM;
-
- /* calculate {xmt,rcv}_{lower,upper}_limit */
- eepro_recalc(dev);
-
- if (GetBit(lp->word[5], ee_BNC_TPE))
- dev->if_port = BNC;
- else
- dev->if_port = TPE;
-
- if (dev->irq < 2 && lp->eepro != 0) {
- /* Mask off INT number */
- int count = lp->word[1] & 7;
- unsigned irqMask = lp->word[7];
-
- while (count--)
- irqMask &= irqMask - 1;
-
- count = ffs(irqMask);
-
- if (count)
- dev->irq = count - 1;
-
- if (dev->irq < 2) {
- printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n");
- goto exit;
- } else if (dev->irq == 2) {
- dev->irq = 9;
- }
- }
-
- dev->netdev_ops = &eepro_netdev_ops;
- dev->watchdog_timeo = TX_TIMEOUT;
- dev->ethtool_ops = &eepro_ethtool_ops;
-
- /* print boot time info */
- eepro_print_info(dev);
-
- /* reset 82595 */
- eepro_reset(ioaddr);
-
- err = register_netdev(dev);
- if (err)
- goto err;
- return 0;
-exit:
- err = -ENODEV;
-err:
- release_region(dev->base_addr, EEPRO_IO_EXTENT);
- return err;
-}
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
- */
-
-static const char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
-static const char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};
-static int eepro_grab_irq(struct net_device *dev)
-{
- static const int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 };
- const int *irqp = irqlist;
- int temp_reg, ioaddr = dev->base_addr;
-
- eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
-
- /* Enable the interrupt line. */
- eepro_en_intline(ioaddr);
-
- /* be CAREFUL, BANK 0 now */
- eepro_sw2bank0(ioaddr);
-
- /* clear all interrupts */
- eepro_clear_int(ioaddr);
-
- /* Let EXEC event to interrupt */
- eepro_en_intexec(ioaddr);
-
- do {
- eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
-
- temp_reg = inb(ioaddr + INT_NO_REG);
- outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG);
-
- eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
-
- if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) {
- unsigned long irq_mask;
- /* Twinkle the interrupt, and check if it's seen */
- irq_mask = probe_irq_on();
-
- eepro_diag(ioaddr); /* RESET the 82595 */
- mdelay(20);
-
- if (*irqp == probe_irq_off(irq_mask)) /* It's a good IRQ line */
- break;
-
- /* clear all interrupts */
- eepro_clear_int(ioaddr);
- }
- } while (*++irqp);
-
- eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
-
- /* Disable the physical interrupt line. */
- eepro_dis_intline(ioaddr);
-
- eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
-
- /* Mask all the interrupts. */
- eepro_dis_int(ioaddr);
-
- /* clear all interrupts */
- eepro_clear_int(ioaddr);
-
- return dev->irq;
-}
-
-static int eepro_open(struct net_device *dev)
-{
- unsigned short temp_reg, old8, old9;
- int irqMask;
- int i, ioaddr = dev->base_addr;
- struct eepro_local *lp = netdev_priv(dev);
-
- if (net_debug > 3)
- printk(KERN_DEBUG "%s: entering eepro_open routine.\n", dev->name);
-
- irqMask = lp->word[7];
-
- if (lp->eepro == LAN595FX_10ISA) {
- if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 3;\n");
- }
- else if (irqMask == ee_FX_INT2IRQ) /* INT to IRQ Mask */
- {
- lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */
- if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 2;\n");
- }
-
- else if ((dev->dev_addr[0] == SA_ADDR0 &&
- dev->dev_addr[1] == SA_ADDR1 &&
- dev->dev_addr[2] == SA_ADDR2))
- {
- lp->eepro = 1;
- if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 1;\n");
- } /* Yes, an Intel EtherExpress Pro/10 */
-
- else lp->eepro = 0; /* No, it is a generic 82585 lan card */
-
- /* Get the interrupt vector for the 82595 */
- if (dev->irq < 2 && eepro_grab_irq(dev) == 0) {
- printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
- return -EAGAIN;
- }
-
- if (request_irq(dev->irq , eepro_interrupt, 0, dev->name, dev)) {
- printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
- return -EAGAIN;
- }
-
- /* Initialize the 82595. */
-
- eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
- temp_reg = inb(ioaddr + lp->eeprom_reg);
-
- lp->stepping = temp_reg >> 5; /* Get the stepping number of the 595 */
-
- if (net_debug > 3)
- printk(KERN_DEBUG "The stepping of the 82595 is %d\n", lp->stepping);
-
- if (temp_reg & 0x10) /* Check the TurnOff Enable bit */
- outb(temp_reg & 0xef, ioaddr + lp->eeprom_reg);
- for (i=0; i < 6; i++)
- outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i);
-
- temp_reg = inb(ioaddr + REG1); /* Setup Transmit Chaining */
- outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */
- | RCV_Discard_BadFrame, ioaddr + REG1);
-
- temp_reg = inb(ioaddr + REG2); /* Match broadcast */
- outb(temp_reg | 0x14, ioaddr + REG2);
-
- temp_reg = inb(ioaddr + REG3);
- outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */
-
- /* Set the receiving mode */
- eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
-
- /* Set the interrupt vector */
- temp_reg = inb(ioaddr + INT_NO_REG);
- if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
- outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG);
- else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
-
-
- temp_reg = inb(ioaddr + INT_NO_REG);
- if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
- outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG);
- else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
-
- if (net_debug > 3)
- printk(KERN_DEBUG "eepro_open: content of INT Reg is %x\n", temp_reg);
-
-
- /* Initialize the RCV and XMT upper and lower limits */
- outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
- outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
- outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg);
- outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg);
-
- /* Enable the interrupt line. */
- eepro_en_intline(ioaddr);
-
- /* Switch back to Bank 0 */
- eepro_sw2bank0(ioaddr);
-
- /* Let RX and TX events to interrupt */
- eepro_en_int(ioaddr);
-
- /* clear all interrupts */
- eepro_clear_int(ioaddr);
-
- /* Initialize RCV */
- outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
- lp->rx_start = lp->rcv_lower_limit;
- outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
-
- /* Initialize XMT */
- outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
- lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
- lp->tx_last = 0;
-
- /* Check for the i82595TX and i82595FX */
- old8 = inb(ioaddr + 8);
- outb(~old8, ioaddr + 8);
-
- if ((temp_reg = inb(ioaddr + 8)) == old8) {
- if (net_debug > 3)
- printk(KERN_DEBUG "i82595 detected!\n");
- lp->version = LAN595;
- }
- else {
- lp->version = LAN595TX;
- outb(old8, ioaddr + 8);
- old9 = inb(ioaddr + 9);
-
- if (irqMask==ee_FX_INT2IRQ) {
- if (net_debug > 3) {
- printk(KERN_DEBUG "IrqMask: %#x\n",irqMask);
- printk(KERN_DEBUG "i82595FX detected!\n");
- }
- lp->version = LAN595FX;
- outb(old9, ioaddr + 9);
- if (dev->if_port != TPE) { /* Hopefully, this will fix the
- problem of using Pentiums and
- pro/10 w/ BNC. */
- eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
- temp_reg = inb(ioaddr + REG13);
- /* disable the full duplex mode since it is not
- applicable with the 10Base2 cable. */
- outb(temp_reg & ~(FDX | A_N_ENABLE), REG13);
- eepro_sw2bank0(ioaddr); /* be CAREFUL, BANK 0 now */
- }
- }
- else if (net_debug > 3) {
- printk(KERN_DEBUG "temp_reg: %#x ~old9: %#x\n",temp_reg,((~old9)&0xff));
- printk(KERN_DEBUG "i82595TX detected!\n");
- }
- }
-
- eepro_sel_reset(ioaddr);
-
- netif_start_queue(dev);
-
- if (net_debug > 3)
- printk(KERN_DEBUG "%s: exiting eepro_open routine.\n", dev->name);
-
- /* enabling rx */
- eepro_en_rx(ioaddr);
-
- return 0;
-}
-
-static void eepro_tx_timeout (struct net_device *dev)
-{
- struct eepro_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
-
- /* if (net_debug > 1) */
- printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name,
- "network cable problem");
- /* This is not a duplicate. One message for the console,
- one for the log file */
- printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name,
- "network cable problem");
- eepro_complete_selreset(ioaddr);
-}
-
-
-static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct eepro_local *lp = netdev_priv(dev);
- unsigned long flags;
- int ioaddr = dev->base_addr;
- short length = skb->len;
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: entering eepro_send_packet routine.\n", dev->name);
-
- if (length < ETH_ZLEN) {
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
- length = ETH_ZLEN;
- }
- netif_stop_queue (dev);
-
- eepro_dis_int(ioaddr);
- spin_lock_irqsave(&lp->lock, flags);
-
- {
- unsigned char *buf = skb->data;
-
- if (hardware_send_packet(dev, buf, length))
- /* we won't wake queue here because we're out of space */
- dev->stats.tx_dropped++;
- else {
- dev->stats.tx_bytes+=skb->len;
- netif_wake_queue(dev);
- }
-
- }
-
- dev_kfree_skb (skb);
-
- /* You might need to clean up and record Tx statistics here. */
- /* dev->stats.tx_aborted_errors++; */
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: exiting eepro_send_packet routine.\n", dev->name);
-
- eepro_en_int(ioaddr);
- spin_unlock_irqrestore(&lp->lock, flags);
-
- return NETDEV_TX_OK;
-}
-
-
-/* The typical workload of the driver:
- Handle the network interface interrupts. */
-
-static irqreturn_t
-eepro_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct eepro_local *lp;
- int ioaddr, status, boguscount = 20;
- int handled = 0;
-
- lp = netdev_priv(dev);
-
- spin_lock(&lp->lock);
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: entering eepro_interrupt routine.\n", dev->name);
-
- ioaddr = dev->base_addr;
-
- while (((status = inb(ioaddr + STATUS_REG)) & (RX_INT|TX_INT)) && (boguscount--))
- {
- handled = 1;
- if (status & RX_INT) {
- if (net_debug > 4)
- printk(KERN_DEBUG "%s: packet received interrupt.\n", dev->name);
-
- eepro_dis_int(ioaddr);
-
- /* Get the received packets */
- eepro_ack_rx(ioaddr);
- eepro_rx(dev);
-
- eepro_en_int(ioaddr);
- }
- if (status & TX_INT) {
- if (net_debug > 4)
- printk(KERN_DEBUG "%s: packet transmit interrupt.\n", dev->name);
-
-
- eepro_dis_int(ioaddr);
-
- /* Process the status of transmitted packets */
- eepro_ack_tx(ioaddr);
- eepro_transmit_interrupt(dev);
-
- eepro_en_int(ioaddr);
- }
- }
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: exiting eepro_interrupt routine.\n", dev->name);
-
- spin_unlock(&lp->lock);
- return IRQ_RETVAL(handled);
-}
-
-static int eepro_close(struct net_device *dev)
-{
- struct eepro_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
- short temp_reg;
-
- netif_stop_queue(dev);
-
- eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
-
- /* Disable the physical interrupt line. */
- temp_reg = inb(ioaddr + REG1);
- outb(temp_reg & 0x7f, ioaddr + REG1);
-
- eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
-
- /* Flush the Tx and disable Rx. */
- outb(STOP_RCV_CMD, ioaddr);
- lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
- lp->tx_last = 0;
-
- /* Mask all the interrupts. */
- eepro_dis_int(ioaddr);
-
- /* clear all interrupts */
- eepro_clear_int(ioaddr);
-
- /* Reset the 82595 */
- eepro_reset(ioaddr);
-
- /* release the interrupt */
- free_irq(dev->irq, dev);
-
- /* Update the statistics here. What statistics? */
-
- return 0;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
- struct eepro_local *lp = netdev_priv(dev);
- short ioaddr = dev->base_addr;
- unsigned short mode;
- struct netdev_hw_addr *ha;
- int mc_count = netdev_mc_count(dev);
-
- if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63)
- {
- eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
- mode = inb(ioaddr + REG2);
- outb(mode | PRMSC_Mode, ioaddr + REG2);
- mode = inb(ioaddr + REG3);
- outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
- eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
- }
-
- else if (mc_count == 0)
- {
- eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
- mode = inb(ioaddr + REG2);
- outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */
- mode = inb(ioaddr + REG3);
- outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
- eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
- }
-
- else
- {
- unsigned short status, *eaddrs;
- int i, boguscount = 0;
-
- /* Disable RX and TX interrupts. Necessary to avoid
- corruption of the HOST_ADDRESS_REG by interrupt
- service routines. */
- eepro_dis_int(ioaddr);
-
- eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
- mode = inb(ioaddr + REG2);
- outb(mode | Multi_IA, ioaddr + REG2);
- mode = inb(ioaddr + REG3);
- outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
- eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
- outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG);
- outw(MC_SETUP, ioaddr + IO_PORT);
- outw(0, ioaddr + IO_PORT);
- outw(0, ioaddr + IO_PORT);
- outw(6 * (mc_count + 1), ioaddr + IO_PORT);
-
- netdev_for_each_mc_addr(ha, dev) {
- eaddrs = (unsigned short *) ha->addr;
- outw(*eaddrs++, ioaddr + IO_PORT);
- outw(*eaddrs++, ioaddr + IO_PORT);
- outw(*eaddrs++, ioaddr + IO_PORT);
- }
-
- eaddrs = (unsigned short *) dev->dev_addr;
- outw(eaddrs[0], ioaddr + IO_PORT);
- outw(eaddrs[1], ioaddr + IO_PORT);
- outw(eaddrs[2], ioaddr + IO_PORT);
- outw(lp->tx_end, ioaddr + lp->xmt_bar);
- outb(MC_SETUP, ioaddr);
-
- /* Update the transmit queue */
- i = lp->tx_end + XMT_HEADER + 6 * (mc_count + 1);
-
- if (lp->tx_start != lp->tx_end)
- {
- /* update the next address and the chain bit in the
- last packet */
- outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
- outw(i, ioaddr + IO_PORT);
- outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
- status = inw(ioaddr + IO_PORT);
- outw(status | CHAIN_BIT, ioaddr + IO_PORT);
- lp->tx_end = i ;
- }
- else {
- lp->tx_start = lp->tx_end = i ;
- }
-
- /* Acknowledge that the MC setup is done */
- do { /* We should be doing this in the eepro_interrupt()! */
- SLOW_DOWN;
- SLOW_DOWN;
- if (inb(ioaddr + STATUS_REG) & 0x08)
- {
- i = inb(ioaddr);
- outb(0x08, ioaddr + STATUS_REG);
-
- if (i & 0x20) { /* command ABORTed */
- printk(KERN_NOTICE "%s: multicast setup failed.\n",
- dev->name);
- break;
- } else if ((i & 0x0f) == 0x03) { /* MC-Done */
- printk(KERN_DEBUG "%s: set Rx mode to %d address%s.\n",
- dev->name, mc_count,
- mc_count > 1 ? "es":"");
- break;
- }
- }
- } while (++boguscount < 100);
-
- /* Re-enable RX and TX interrupts */
- eepro_en_int(ioaddr);
- }
- if (lp->eepro == LAN595FX_10ISA) {
- eepro_complete_selreset(ioaddr);
- }
- else
- eepro_en_rx(ioaddr);
-}
-
-/* The horrible routine to read a word from the serial EEPROM. */
-/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */
-
-/* The delay between EEPROM clock transitions. */
-#define eeprom_delay() { udelay(40); }
-#define EE_READ_CMD (6 << 6)
-
-static int
-read_eeprom(int ioaddr, int location, struct net_device *dev)
-{
- int i;
- unsigned short retval = 0;
- struct eepro_local *lp = netdev_priv(dev);
- short ee_addr = ioaddr + lp->eeprom_reg;
- int read_cmd = location | EE_READ_CMD;
- short ctrl_val = EECS ;
-
- /* XXXX - black magic */
- eepro_sw2bank1(ioaddr);
- outb(0x00, ioaddr + STATUS_REG);
- /* XXXX - black magic */
-
- eepro_sw2bank2(ioaddr);
- outb(ctrl_val, ee_addr);
-
- /* Shift the read command bits out. */
- for (i = 8; i >= 0; i--) {
- short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI
- : ctrl_val;
- outb(outval, ee_addr);
- outb(outval | EESK, ee_addr); /* EEPROM clock tick. */
- eeprom_delay();
- outb(outval, ee_addr); /* Finish EEPROM a clock tick. */
- eeprom_delay();
- }
- outb(ctrl_val, ee_addr);
-
- for (i = 16; i > 0; i--) {
- outb(ctrl_val | EESK, ee_addr); eeprom_delay();
- retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0);
- outb(ctrl_val, ee_addr); eeprom_delay();
- }
-
- /* Terminate the EEPROM access. */
- ctrl_val &= ~EECS;
- outb(ctrl_val | EESK, ee_addr);
- eeprom_delay();
- outb(ctrl_val, ee_addr);
- eeprom_delay();
- eepro_sw2bank0(ioaddr);
- return retval;
-}
-
-static int
-hardware_send_packet(struct net_device *dev, void *buf, short length)
-{
- struct eepro_local *lp = netdev_priv(dev);
- short ioaddr = dev->base_addr;
- unsigned status, tx_available, last, end;
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: entering hardware_send_packet routine.\n", dev->name);
-
- /* determine how much of the transmit buffer space is available */
- if (lp->tx_end > lp->tx_start)
- tx_available = lp->xmt_ram - (lp->tx_end - lp->tx_start);
- else if (lp->tx_end < lp->tx_start)
- tx_available = lp->tx_start - lp->tx_end;
- else tx_available = lp->xmt_ram;
-
- if (((((length + 3) >> 1) << 1) + 2*XMT_HEADER) >= tx_available) {
- /* No space available ??? */
- return 1;
- }
-
- last = lp->tx_end;
- end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
-
- if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */
- if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
- /* Arrrr!!!, must keep the xmt header together,
- several days were lost to chase this one down. */
- last = lp->xmt_lower_limit;
- end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
- }
- else end = lp->xmt_lower_limit + (end -
- lp->xmt_upper_limit + 2);
- }
-
- outw(last, ioaddr + HOST_ADDRESS_REG);
- outw(XMT_CMD, ioaddr + IO_PORT);
- outw(0, ioaddr + IO_PORT);
- outw(end, ioaddr + IO_PORT);
- outw(length, ioaddr + IO_PORT);
-
- if (lp->version == LAN595)
- outsw(ioaddr + IO_PORT, buf, (length + 3) >> 1);
- else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
- unsigned short temp = inb(ioaddr + INT_MASK_REG);
- outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
- outsl(ioaddr + IO_PORT_32_BIT, buf, (length + 3) >> 2);
- outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
- }
-
- /* A dummy read to flush the DRAM write pipeline */
- status = inw(ioaddr + IO_PORT);
-
- if (lp->tx_start == lp->tx_end) {
- outw(last, ioaddr + lp->xmt_bar);
- outb(XMT_CMD, ioaddr);
- lp->tx_start = last; /* I don't like to change tx_start here */
- }
- else {
- /* update the next address and the chain bit in the
- last packet */
-
- if (lp->tx_end != last) {
- outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
- outw(last, ioaddr + IO_PORT);
- }
-
- outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
- status = inw(ioaddr + IO_PORT);
- outw(status | CHAIN_BIT, ioaddr + IO_PORT);
-
- /* Continue the transmit command */
- outb(RESUME_XMT_CMD, ioaddr);
- }
-
- lp->tx_last = last;
- lp->tx_end = end;
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: exiting hardware_send_packet routine.\n", dev->name);
-
- return 0;
-}
-
-static void
-eepro_rx(struct net_device *dev)
-{
- struct eepro_local *lp = netdev_priv(dev);
- short ioaddr = dev->base_addr;
- short boguscount = 20;
- short rcv_car = lp->rx_start;
- unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size;
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: entering eepro_rx routine.\n", dev->name);
-
- /* Set the read pointer to the start of the RCV */
- outw(rcv_car, ioaddr + HOST_ADDRESS_REG);
-
- rcv_event = inw(ioaddr + IO_PORT);
-
- while (rcv_event == RCV_DONE) {
-
- rcv_status = inw(ioaddr + IO_PORT);
- rcv_next_frame = inw(ioaddr + IO_PORT);
- rcv_size = inw(ioaddr + IO_PORT);
-
- if ((rcv_status & (RX_OK | RX_ERROR)) == RX_OK) {
-
- /* Malloc up new buffer. */
- struct sk_buff *skb;
-
- dev->stats.rx_bytes+=rcv_size;
- rcv_size &= 0x3fff;
- skb = netdev_alloc_skb(dev, rcv_size + 5);
- if (skb == NULL) {
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
- dev->stats.rx_dropped++;
- rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
- lp->rx_start = rcv_next_frame;
- outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
-
- break;
- }
- skb_reserve(skb,2);
-
- if (lp->version == LAN595)
- insw(ioaddr+IO_PORT, skb_put(skb,rcv_size), (rcv_size + 3) >> 1);
- else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
- unsigned short temp = inb(ioaddr + INT_MASK_REG);
- outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
- insl(ioaddr+IO_PORT_32_BIT, skb_put(skb,rcv_size),
- (rcv_size + 3) >> 2);
- outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
- }
-
- skb->protocol = eth_type_trans(skb,dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- }
-
- else { /* Not sure will ever reach here,
- I set the 595 to discard bad received frames */
- dev->stats.rx_errors++;
-
- if (rcv_status & 0x0100)
- dev->stats.rx_over_errors++;
-
- else if (rcv_status & 0x0400)
- dev->stats.rx_frame_errors++;
-
- else if (rcv_status & 0x0800)
- dev->stats.rx_crc_errors++;
-
- printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
- dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
- }
-
- if (rcv_status & 0x1000)
- dev->stats.rx_length_errors++;
-
- rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
- lp->rx_start = rcv_next_frame;
-
- if (--boguscount == 0)
- break;
-
- outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
- rcv_event = inw(ioaddr + IO_PORT);
-
- }
- if (rcv_car == 0)
- rcv_car = lp->rcv_upper_limit | 0xff;
-
- outw(rcv_car - 1, ioaddr + RCV_STOP);
-
- if (net_debug > 5)
- printk(KERN_DEBUG "%s: exiting eepro_rx routine.\n", dev->name);
-}
-
-static void
-eepro_transmit_interrupt(struct net_device *dev)
-{
- struct eepro_local *lp = netdev_priv(dev);
- short ioaddr = dev->base_addr;
- short boguscount = 25;
- short xmt_status;
-
- while ((lp->tx_start != lp->tx_end) && boguscount--) {
-
- outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG);
- xmt_status = inw(ioaddr+IO_PORT);
-
- if (!(xmt_status & TX_DONE_BIT))
- break;
-
- xmt_status = inw(ioaddr+IO_PORT);
- lp->tx_start = inw(ioaddr+IO_PORT);
-
- netif_wake_queue (dev);
-
- if (xmt_status & TX_OK)
- dev->stats.tx_packets++;
- else {
- dev->stats.tx_errors++;
- if (xmt_status & 0x0400) {
- dev->stats.tx_carrier_errors++;
- printk(KERN_DEBUG "%s: carrier error\n",
- dev->name);
- printk(KERN_DEBUG "%s: XMT status = %#x\n",
- dev->name, xmt_status);
- }
- else {
- printk(KERN_DEBUG "%s: XMT status = %#x\n",
- dev->name, xmt_status);
- printk(KERN_DEBUG "%s: XMT status = %#x\n",
- dev->name, xmt_status);
- }
- }
- if (xmt_status & 0x000f) {
- dev->stats.collisions += (xmt_status & 0x000f);
- }
-
- if ((xmt_status & 0x0040) == 0x0) {
- dev->stats.tx_heartbeat_errors++;
- }
- }
-}
-
-static int eepro_ethtool_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- struct eepro_local *lp = netdev_priv(dev);
-
- cmd->supported = SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_Autoneg;
- cmd->advertising = ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_Autoneg;
-
- if (GetBit(lp->word[5], ee_PortTPE)) {
- cmd->supported |= SUPPORTED_TP;
- cmd->advertising |= ADVERTISED_TP;
- }
- if (GetBit(lp->word[5], ee_PortBNC)) {
- cmd->supported |= SUPPORTED_BNC;
- cmd->advertising |= ADVERTISED_BNC;
- }
- if (GetBit(lp->word[5], ee_PortAUI)) {
- cmd->supported |= SUPPORTED_AUI;
- cmd->advertising |= ADVERTISED_AUI;
- }
-
- ethtool_cmd_speed_set(cmd, SPEED_10);
-
- if (dev->if_port == TPE && lp->word[1] & ee_Duplex) {
- cmd->duplex = DUPLEX_FULL;
- }
- else {
- cmd->duplex = DUPLEX_HALF;
- }
-
- cmd->port = dev->if_port;
- cmd->phy_address = dev->base_addr;
- cmd->transceiver = XCVR_INTERNAL;
-
- if (lp->word[0] & ee_AutoNeg) {
- cmd->autoneg = 1;
- }
-
- return 0;
-}
-
-static void eepro_ethtool_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *drvinfo)
-{
- strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
- strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
- snprintf(drvinfo->bus_info, sizeof(drvinfo->bus_info),
- "ISA 0x%lx", dev->base_addr);
-}
-
-static const struct ethtool_ops eepro_ethtool_ops = {
- .get_settings = eepro_ethtool_get_settings,
- .get_drvinfo = eepro_ethtool_get_drvinfo,
-};
-
-#ifdef MODULE
-
-#define MAX_EEPRO 8
-static struct net_device *dev_eepro[MAX_EEPRO];
-
-static int io[MAX_EEPRO] = {
- [0 ... MAX_EEPRO-1] = -1
-};
-static int irq[MAX_EEPRO];
-static int mem[MAX_EEPRO] = { /* Size of the rx buffer in KB */
- [0 ... MAX_EEPRO-1] = RCV_DEFAULT_RAM/1024
-};
-static int autodetect;
-
-static int n_eepro;
-/* For linux 2.1.xx */
-
-MODULE_AUTHOR("Pascal Dupuis and others");
-MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver");
-MODULE_LICENSE("GPL");
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
-module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
-MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
-MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
-MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
-
-int __init init_module(void)
-{
- struct net_device *dev;
- int i;
- if (io[0] == -1 && autodetect == 0) {
- printk(KERN_WARNING "eepro_init_module: Probe is very dangerous in ISA boards!\n");
- printk(KERN_WARNING "eepro_init_module: Please add \"autodetect=1\" to force probe\n");
- return -ENODEV;
- }
- else if (autodetect) {
- /* if autodetect is set then we must force detection */
- for (i = 0; i < MAX_EEPRO; i++) {
- io[i] = 0;
- }
-
- printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
- }
-
- for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
- dev = alloc_etherdev(sizeof(struct eepro_local));
- if (!dev)
- break;
-
- dev->mem_end = mem[i];
- dev->base_addr = io[i];
- dev->irq = irq[i];
-
- if (do_eepro_probe(dev) == 0) {
- dev_eepro[n_eepro++] = dev;
- continue;
- }
- free_netdev(dev);
- break;
- }
-
- if (n_eepro)
- printk(KERN_INFO "%s", version);
-
- return n_eepro ? 0 : -ENODEV;
-}
-
-void __exit
-cleanup_module(void)
-{
- int i;
-
- for (i=0; i<n_eepro; i++) {
- struct net_device *dev = dev_eepro[i];
- unregister_netdev(dev);
- release_region(dev->base_addr, EEPRO_IO_EXTENT);
- free_netdev(dev);
- }
-}
-#endif /* MODULE */
diff --git a/drivers/net/ethernet/i825xx/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c
deleted file mode 100644
index 7a6a2f04c5b1..000000000000
--- a/drivers/net/ethernet/i825xx/eexpress.c
+++ /dev/null
@@ -1,1661 +0,0 @@
-/* Intel EtherExpress 16 device driver for Linux
- *
- * Written by John Sullivan, 1995
- * based on original code by Donald Becker, with changes by
- * Alan Cox and Pauline Middelink.
- *
- * Support for 8-bit mode by Zoltan Szilagyi <zoltans@cs.arizona.edu>
- *
- * Many modifications, and currently maintained, by
- * Philip Blundell <philb@gnu.org>
- * Added the Compaq LTE Alan Cox <alan@lxorguk.ukuu.org.uk>
- * Added MCA support Adam Fritzler (now deleted)
- *
- * Note - this driver is experimental still - it has problems on faster
- * machines. Someone needs to sit down and go through it line by line with
- * a databook...
- */
-
-/* The EtherExpress 16 is a fairly simple card, based on a shared-memory
- * design using the i82586 Ethernet coprocessor. It bears no relationship,
- * as far as I know, to the similarly-named "EtherExpress Pro" range.
- *
- * Historically, Linux support for these cards has been very bad. However,
- * things seem to be getting better slowly.
- */
-
-/* If your card is confused about what sort of interface it has (eg it
- * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART'
- * or 'SOFTSET /LISA' from DOS seems to help.
- */
-
-/* Here's the scoop on memory mapping.
- *
- * There are three ways to access EtherExpress card memory: either using the
- * shared-memory mapping, or using PIO through the dataport, or using PIO
- * through the "shadow memory" ports.
- *
- * The shadow memory system works by having the card map some of its memory
- * as follows:
- *
- * (the low five bits of the SMPTR are ignored)
- *
- * base+0x4000..400f memory at SMPTR+0..15
- * base+0x8000..800f memory at SMPTR+16..31
- * base+0xc000..c007 dubious stuff (memory at SMPTR+16..23 apparently)
- * base+0xc008..c00f memory at 0x0008..0x000f
- *
- * This last set (the one at c008) is particularly handy because the SCB
- * lives at 0x0008. So that set of ports gives us easy random access to data
- * in the SCB without having to mess around setting up pointers and the like.
- * We always use this method to access the SCB (via the scb_xx() functions).
- *
- * Dataport access works by aiming the appropriate (read or write) pointer
- * at the first address you're interested in, and then reading or writing from
- * the dataport. The pointers auto-increment after each transfer. We use
- * this for data transfer.
- *
- * We don't use the shared-memory system because it allegedly doesn't work on
- * all cards, and because it's a bit more prone to go wrong (it's one more
- * thing to configure...).
- */
-
-/* Known bugs:
- *
- * - The card seems to want to give us two interrupts every time something
- * happens, where just one would be better.
- */
-
-/*
- *
- * Note by Zoltan Szilagyi 10-12-96:
- *
- * I've succeeded in eliminating the "CU wedged" messages, and hence the
- * lockups, which were only occurring with cards running in 8-bit mode ("force
- * 8-bit operation" in Intel's SoftSet utility). This version of the driver
- * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the
- * CU before submitting a packet for transmission, and then restarts it as soon
- * as the process of handing the packet is complete. This is definitely an
- * unnecessary slowdown if the card is running in 16-bit mode; therefore one
- * should detect 16-bit vs 8-bit mode from the EEPROM settings and act
- * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for
- * ftp's, which is significantly better than I get in DOS, so the overhead of
- * stopping and restarting the CU with each transmit is not prohibitive in
- * practice.
- *
- * Update by David Woodhouse 11/5/99:
- *
- * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture.
- * I assume that this is because 16-bit accesses are actually handled as two
- * 8-bit accesses.
- */
-
-#ifdef __alpha__
-#define LOCKUP16 1
-#endif
-#ifndef LOCKUP16
-#define LOCKUP16 0
-#endif
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/in.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#ifndef NET_DEBUG
-#define NET_DEBUG 4
-#endif
-
-#include "eexpress.h"
-
-#define EEXP_IO_EXTENT 16
-
-/*
- * Private data declarations
- */
-
-struct net_local
-{
- unsigned long last_tx; /* jiffies when last transmit started */
- unsigned long init_time; /* jiffies when eexp_hw_init586 called */
- unsigned short rx_first; /* first rx buf, same as RX_BUF_START */
- unsigned short rx_last; /* last rx buf */
- unsigned short rx_ptr; /* first rx buf to look at */
- unsigned short tx_head; /* next free tx buf */
- unsigned short tx_reap; /* first in-use tx buf */
- unsigned short tx_tail; /* previous tx buf to tx_head */
- unsigned short tx_link; /* last known-executing tx buf */
- unsigned short last_tx_restart; /* set to tx_link when we
- restart the CU */
- unsigned char started;
- unsigned short rx_buf_start;
- unsigned short rx_buf_end;
- unsigned short num_tx_bufs;
- unsigned short num_rx_bufs;
- unsigned char width; /* 0 for 16bit, 1 for 8bit */
- unsigned char was_promisc;
- unsigned char old_mc_count;
- spinlock_t lock;
-};
-
-/* This is the code and data that is downloaded to the EtherExpress card's
- * memory at boot time.
- */
-
-static unsigned short start_code[] = {
-/* 0x0000 */
- 0x0001, /* ISCP: busy - cleared after reset */
- 0x0008,0x0000,0x0000, /* offset,address (lo,hi) of SCB */
-
- 0x0000,0x0000, /* SCB: status, commands */
- 0x0000,0x0000, /* links to first command block,
- first receive descriptor */
- 0x0000,0x0000, /* CRC error, alignment error counts */
- 0x0000,0x0000, /* out of resources, overrun error counts */
-
- 0x0000,0x0000, /* pad */
- 0x0000,0x0000,
-
-/* 0x20 -- start of 82586 CU program */
-#define CONF_LINK 0x20
- 0x0000,Cmd_Config,
- 0x0032, /* link to next command */
- 0x080c, /* 12 bytes follow : fifo threshold=8 */
- 0x2e40, /* don't rx bad frames
- * SRDY/ARDY => ext. sync. : preamble len=8
- * take addresses from data buffers
- * 6 bytes/address
- */
- 0x6000, /* default backoff method & priority
- * interframe spacing = 0x60 */
- 0xf200, /* slot time=0x200
- * max collision retry = 0xf */
-#define CONF_PROMISC 0x2e
- 0x0000, /* no HDLC : normal CRC : enable broadcast
- * disable promiscuous/multicast modes */
- 0x003c, /* minimum frame length = 60 octets) */
-
- 0x0000,Cmd_SetAddr,
- 0x003e, /* link to next command */
-#define CONF_HWADDR 0x38
- 0x0000,0x0000,0x0000, /* hardware address placed here */
-
- 0x0000,Cmd_MCast,
- 0x0076, /* link to next command */
-#define CONF_NR_MULTICAST 0x44
- 0x0000, /* number of bytes in multicast address(es) */
-#define CONF_MULTICAST 0x46
- 0x0000, 0x0000, 0x0000, /* some addresses */
- 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000,
-
-#define CONF_DIAG_RESULT 0x76
- 0x0000, Cmd_Diag,
- 0x007c, /* link to next command */
-
- 0x0000,Cmd_TDR|Cmd_INT,
- 0x0084,
-#define CONF_TDR_RESULT 0x82
- 0x0000,
-
- 0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */
- 0x0084 /* dummy link */
-};
-
-/* maps irq number to EtherExpress magic value */
-static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 };
-
-/*
- * Prototypes for Linux interface
- */
-
-static int eexp_open(struct net_device *dev);
-static int eexp_close(struct net_device *dev);
-static void eexp_timeout(struct net_device *dev);
-static netdev_tx_t eexp_xmit(struct sk_buff *buf,
- struct net_device *dev);
-
-static irqreturn_t eexp_irq(int irq, void *dev_addr);
-static void eexp_set_multicast(struct net_device *dev);
-
-/*
- * Prototypes for hardware access functions
- */
-
-static void eexp_hw_rx_pio(struct net_device *dev);
-static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
- unsigned short len);
-static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr);
-static unsigned short eexp_hw_readeeprom(unsigned short ioaddr,
- unsigned char location);
-
-static unsigned short eexp_hw_lasttxstat(struct net_device *dev);
-static void eexp_hw_txrestart(struct net_device *dev);
-
-static void eexp_hw_txinit (struct net_device *dev);
-static void eexp_hw_rxinit (struct net_device *dev);
-
-static void eexp_hw_init586 (struct net_device *dev);
-static void eexp_setup_filter (struct net_device *dev);
-
-static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"};
-enum eexp_iftype {AUI=0, BNC=1, TPE=2};
-
-#define STARTED_RU 2
-#define STARTED_CU 1
-
-/*
- * Primitive hardware access functions.
- */
-
-static inline unsigned short scb_status(struct net_device *dev)
-{
- return inw(dev->base_addr + 0xc008);
-}
-
-static inline unsigned short scb_rdcmd(struct net_device *dev)
-{
- return inw(dev->base_addr + 0xc00a);
-}
-
-static inline void scb_command(struct net_device *dev, unsigned short cmd)
-{
- outw(cmd, dev->base_addr + 0xc00a);
-}
-
-static inline void scb_wrcbl(struct net_device *dev, unsigned short val)
-{
- outw(val, dev->base_addr + 0xc00c);
-}
-
-static inline void scb_wrrfa(struct net_device *dev, unsigned short val)
-{
- outw(val, dev->base_addr + 0xc00e);
-}
-
-static inline void set_loopback(struct net_device *dev)
-{
- outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config);
-}
-
-static inline void clear_loopback(struct net_device *dev)
-{
- outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config);
-}
-
-static inline unsigned short int SHADOW(short int addr)
-{
- addr &= 0x1f;
- if (addr > 0xf) addr += 0x3ff0;
- return addr + 0x4000;
-}
-
-/*
- * Linux interface
- */
-
-/*
- * checks for presence of EtherExpress card
- */
-
-static int __init do_express_probe(struct net_device *dev)
-{
- unsigned short *port;
- static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 };
- unsigned short ioaddr = dev->base_addr;
- int dev_irq = dev->irq;
- int err;
-
- dev->if_port = 0xff; /* not set */
-
- if (ioaddr&0xfe00) {
- if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress"))
- return -EBUSY;
- err = eexp_hw_probe(dev,ioaddr);
- release_region(ioaddr, EEXP_IO_EXTENT);
- return err;
- } else if (ioaddr)
- return -ENXIO;
-
- for (port=&ports[0] ; *port ; port++ )
- {
- unsigned short sum = 0;
- int i;
- if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress"))
- continue;
- for ( i=0 ; i<4 ; i++ )
- {
- unsigned short t;
- t = inb(*port + ID_PORT);
- sum |= (t>>4) << ((t & 0x03)<<2);
- }
- if (sum==0xbaba && !eexp_hw_probe(dev,*port)) {
- release_region(*port, EEXP_IO_EXTENT);
- return 0;
- }
- release_region(*port, EEXP_IO_EXTENT);
- dev->irq = dev_irq;
- }
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init express_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_express_probe(dev);
- if (!err)
- return dev;
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-/*
- * open and initialize the adapter, ready for use
- */
-
-static int eexp_open(struct net_device *dev)
-{
- int ret;
- unsigned short ioaddr = dev->base_addr;
- struct net_local *lp = netdev_priv(dev);
-
-#if NET_DEBUG > 6
- printk(KERN_DEBUG "%s: eexp_open()\n", dev->name);
-#endif
-
- if (!dev->irq || !irqrmap[dev->irq])
- return -ENXIO;
-
- ret = request_irq(dev->irq, eexp_irq, 0, dev->name, dev);
- if (ret)
- return ret;
-
- if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) {
- printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
- , ioaddr);
- goto err_out1;
- }
- if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
- printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
- , ioaddr+0x4000);
- goto err_out2;
- }
- if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
- printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
- , ioaddr+0x8000);
- goto err_out3;
- }
- if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
- printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
- , ioaddr+0xc000);
- goto err_out4;
- }
-
- if (lp->width) {
- printk("%s: forcing ASIC to 8-bit mode\n", dev->name);
- outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config);
- }
-
- eexp_hw_init586(dev);
- netif_start_queue(dev);
-#if NET_DEBUG > 6
- printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name);
-#endif
- return 0;
-
- err_out4:
- release_region(ioaddr+0x8000, EEXP_IO_EXTENT);
- err_out3:
- release_region(ioaddr+0x4000, EEXP_IO_EXTENT);
- err_out2:
- release_region(ioaddr, EEXP_IO_EXTENT);
- err_out1:
- free_irq(dev->irq, dev);
- return -EBUSY;
-}
-
-/*
- * close and disable the interface, leaving the 586 in reset.
- */
-
-static int eexp_close(struct net_device *dev)
-{
- unsigned short ioaddr = dev->base_addr;
- struct net_local *lp = netdev_priv(dev);
-
- int irq = dev->irq;
-
- netif_stop_queue(dev);
-
- outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
- lp->started = 0;
- scb_command(dev, SCB_CUsuspend|SCB_RUsuspend);
- outb(0,ioaddr+SIGNAL_CA);
- free_irq(irq,dev);
- outb(i586_RST,ioaddr+EEPROM_Ctrl);
- release_region(ioaddr, EEXP_IO_EXTENT);
- release_region(ioaddr+0x4000, 16);
- release_region(ioaddr+0x8000, 16);
- release_region(ioaddr+0xc000, 16);
-
- return 0;
-}
-
-/*
- * This gets called when a higher level thinks we are broken. Check that
- * nothing has become jammed in the CU.
- */
-
-static void unstick_cu(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short ioaddr = dev->base_addr;
-
- if (lp->started)
- {
- if (time_after(jiffies, dev_trans_start(dev) + HZ/2))
- {
- if (lp->tx_link==lp->last_tx_restart)
- {
- unsigned short boguscount=200,rsst;
- printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n",
- dev->name, scb_status(dev));
- eexp_hw_txinit(dev);
- lp->last_tx_restart = 0;
- scb_wrcbl(dev, lp->tx_link);
- scb_command(dev, SCB_CUstart);
- outb(0,ioaddr+SIGNAL_CA);
- while (!SCB_complete(rsst=scb_status(dev)))
- {
- if (!--boguscount)
- {
- boguscount=200;
- printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
- dev->name,rsst);
- scb_wrcbl(dev, lp->tx_link);
- scb_command(dev, SCB_CUstart);
- outb(0,ioaddr+SIGNAL_CA);
- }
- }
- netif_wake_queue(dev);
- }
- else
- {
- unsigned short status = scb_status(dev);
- if (SCB_CUdead(status))
- {
- unsigned short txstatus = eexp_hw_lasttxstat(dev);
- printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n",
- dev->name, status, txstatus);
- eexp_hw_txrestart(dev);
- }
- else
- {
- unsigned short txstatus = eexp_hw_lasttxstat(dev);
- if (netif_queue_stopped(dev) && !txstatus)
- {
- printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n",
- dev->name,status,txstatus);
- eexp_hw_init586(dev);
- netif_wake_queue(dev);
- }
- else
- {
- printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
- }
- }
- }
- }
- }
- else
- {
- if (time_after(jiffies, lp->init_time + 10))
- {
- unsigned short status = scb_status(dev);
- printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n",
- dev->name, status);
- eexp_hw_init586(dev);
- netif_wake_queue(dev);
- }
- }
-}
-
-static void eexp_timeout(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-#ifdef CONFIG_SMP
- unsigned long flags;
-#endif
- int status;
-
- disable_irq(dev->irq);
-
- /*
- * Best would be to use synchronize_irq(); spin_lock() here
- * lets make it work first..
- */
-
-#ifdef CONFIG_SMP
- spin_lock_irqsave(&lp->lock, flags);
-#endif
-
- status = scb_status(dev);
- unstick_cu(dev);
- printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name,
- (SCB_complete(status)?"lost interrupt":
- "board on fire"));
- dev->stats.tx_errors++;
- lp->last_tx = jiffies;
- if (!SCB_complete(status)) {
- scb_command(dev, SCB_CUabort);
- outb(0,dev->base_addr+SIGNAL_CA);
- }
- netif_wake_queue(dev);
-#ifdef CONFIG_SMP
- spin_unlock_irqrestore(&lp->lock, flags);
-#endif
-}
-
-/*
- * Called to transmit a packet, or to allow us to right ourselves
- * if the kernel thinks we've died.
- */
-static netdev_tx_t eexp_xmit(struct sk_buff *buf, struct net_device *dev)
-{
- short length = buf->len;
-#ifdef CONFIG_SMP
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-#endif
-
-#if NET_DEBUG > 6
- printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name);
-#endif
-
- if (buf->len < ETH_ZLEN) {
- if (skb_padto(buf, ETH_ZLEN))
- return NETDEV_TX_OK;
- length = ETH_ZLEN;
- }
-
- disable_irq(dev->irq);
-
- /*
- * Best would be to use synchronize_irq(); spin_lock() here
- * lets make it work first..
- */
-
-#ifdef CONFIG_SMP
- spin_lock_irqsave(&lp->lock, flags);
-#endif
-
- {
- unsigned short *data = (unsigned short *)buf->data;
-
- dev->stats.tx_bytes += length;
-
- eexp_hw_tx_pio(dev,data,length);
- }
- dev_kfree_skb(buf);
-#ifdef CONFIG_SMP
- spin_unlock_irqrestore(&lp->lock, flags);
-#endif
- enable_irq(dev->irq);
- return NETDEV_TX_OK;
-}
-
-/*
- * Handle an EtherExpress interrupt
- * If we've finished initializing, start the RU and CU up.
- * If we've already started, reap tx buffers, handle any received packets,
- * check to make sure we've not become wedged.
- */
-
-static unsigned short eexp_start_irq(struct net_device *dev,
- unsigned short status)
-{
- unsigned short ack_cmd = SCB_ack(status);
- struct net_local *lp = netdev_priv(dev);
- unsigned short ioaddr = dev->base_addr;
- if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) {
- short diag_status, tdr_status;
- while (SCB_CUstat(status)==2)
- status = scb_status(dev);
-#if NET_DEBUG > 4
- printk("%s: CU went non-active (status %04x)\n",
- dev->name, status);
-#endif
-
- outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR);
- diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT));
- if (diag_status & 1<<11) {
- printk(KERN_WARNING "%s: 82586 failed self-test\n",
- dev->name);
- } else if (!(diag_status & 1<<13)) {
- printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name);
- }
-
- outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR);
- tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT));
- if (tdr_status & (TDR_SHORT|TDR_OPEN)) {
- printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : "");
- }
- else if (tdr_status & TDR_XCVRPROBLEM) {
- printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name);
- }
- else if (tdr_status & TDR_LINKOK) {
-#if NET_DEBUG > 4
- printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name);
-#endif
- } else {
- printk("%s: TDR is ga-ga (status %04x)\n", dev->name,
- tdr_status);
- }
-
- lp->started |= STARTED_CU;
- scb_wrcbl(dev, lp->tx_link);
- /* if the RU isn't running, start it now */
- if (!(lp->started & STARTED_RU)) {
- ack_cmd |= SCB_RUstart;
- scb_wrrfa(dev, lp->rx_buf_start);
- lp->rx_ptr = lp->rx_buf_start;
- lp->started |= STARTED_RU;
- }
- ack_cmd |= SCB_CUstart | 0x2000;
- }
-
- if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4)
- lp->started|=STARTED_RU;
-
- return ack_cmd;
-}
-
-static void eexp_cmd_clear(struct net_device *dev)
-{
- unsigned long int oldtime = jiffies;
- while (scb_rdcmd(dev) && (time_before(jiffies, oldtime + 10)));
- if (scb_rdcmd(dev)) {
- printk("%s: command didn't clear\n", dev->name);
- }
-}
-
-static irqreturn_t eexp_irq(int dummy, void *dev_info)
-{
- struct net_device *dev = dev_info;
- struct net_local *lp;
- unsigned short ioaddr,status,ack_cmd;
- unsigned short old_read_ptr, old_write_ptr;
-
- lp = netdev_priv(dev);
- ioaddr = dev->base_addr;
-
- spin_lock(&lp->lock);
-
- old_read_ptr = inw(ioaddr+READ_PTR);
- old_write_ptr = inw(ioaddr+WRITE_PTR);
-
- outb(SIRQ_dis|irqrmap[dev->irq], ioaddr+SET_IRQ);
-
- status = scb_status(dev);
-
-#if NET_DEBUG > 4
- printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status);
-#endif
-
- if (lp->started == (STARTED_CU | STARTED_RU)) {
-
- do {
- eexp_cmd_clear(dev);
-
- ack_cmd = SCB_ack(status);
- scb_command(dev, ack_cmd);
- outb(0,ioaddr+SIGNAL_CA);
-
- eexp_cmd_clear(dev);
-
- if (SCB_complete(status)) {
- if (!eexp_hw_lasttxstat(dev)) {
- printk("%s: tx interrupt but no status\n", dev->name);
- }
- }
-
- if (SCB_rxdframe(status))
- eexp_hw_rx_pio(dev);
-
- status = scb_status(dev);
- } while (status & 0xc000);
-
- if (SCB_RUdead(status))
- {
- printk(KERN_WARNING "%s: RU stopped: status %04x\n",
- dev->name,status);
-#if 0
- printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd);
- outw(lp->cur_rfd, ioaddr+READ_PTR);
- printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT));
- outw(lp->cur_rfd+6, ioaddr+READ_PTR);
- printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT));
- outw(rbd, ioaddr+READ_PTR);
- printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT));
- outw(rbd+8, ioaddr+READ_PTR);
- printk("[%04x]\n", inw(ioaddr+DATAPORT));
-#endif
- dev->stats.rx_errors++;
-#if 1
- eexp_hw_rxinit(dev);
-#else
- lp->cur_rfd = lp->first_rfd;
-#endif
- scb_wrrfa(dev, lp->rx_buf_start);
- scb_command(dev, SCB_RUstart);
- outb(0,ioaddr+SIGNAL_CA);
- }
- } else {
- if (status & 0x8000)
- ack_cmd = eexp_start_irq(dev, status);
- else
- ack_cmd = SCB_ack(status);
- scb_command(dev, ack_cmd);
- outb(0,ioaddr+SIGNAL_CA);
- }
-
- eexp_cmd_clear(dev);
-
- outb(SIRQ_en|irqrmap[dev->irq], ioaddr+SET_IRQ);
-
-#if NET_DEBUG > 6
- printk("%s: leaving eexp_irq()\n", dev->name);
-#endif
- outw(old_read_ptr, ioaddr+READ_PTR);
- outw(old_write_ptr, ioaddr+WRITE_PTR);
-
- spin_unlock(&lp->lock);
- return IRQ_HANDLED;
-}
-
-/*
- * Hardware access functions
- */
-
-/*
- * Set the cable type to use.
- */
-
-static void eexp_hw_set_interface(struct net_device *dev)
-{
- unsigned char oldval = inb(dev->base_addr + 0x300e);
- oldval &= ~0x82;
- switch (dev->if_port) {
- case TPE:
- oldval |= 0x2;
- case BNC:
- oldval |= 0x80;
- break;
- }
- outb(oldval, dev->base_addr+0x300e);
- mdelay(20);
-}
-
-/*
- * Check all the receive buffers, and hand any received packets
- * to the upper levels. Basic sanity check on each frame
- * descriptor, though we don't bother trying to fix broken ones.
- */
-
-static void eexp_hw_rx_pio(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short rx_block = lp->rx_ptr;
- unsigned short boguscount = lp->num_rx_bufs;
- unsigned short ioaddr = dev->base_addr;
- unsigned short status;
-
-#if NET_DEBUG > 6
- printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name);
-#endif
-
- do {
- unsigned short rfd_cmd, rx_next, pbuf, pkt_len;
-
- outw(rx_block, ioaddr + READ_PTR);
- status = inw(ioaddr + DATAPORT);
-
- if (FD_Done(status))
- {
- rfd_cmd = inw(ioaddr + DATAPORT);
- rx_next = inw(ioaddr + DATAPORT);
- pbuf = inw(ioaddr + DATAPORT);
-
- outw(pbuf, ioaddr + READ_PTR);
- pkt_len = inw(ioaddr + DATAPORT);
-
- if (rfd_cmd!=0x0000)
- {
- printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n",
- dev->name, rfd_cmd);
- continue;
- }
- else if (pbuf!=rx_block+0x16)
- {
- printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n",
- dev->name, rx_block+0x16, pbuf);
- continue;
- }
- else if ((pkt_len & 0xc000)!=0xc000)
- {
- printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n",
- dev->name, pkt_len & 0xc000);
- continue;
- }
- else if (!FD_OK(status))
- {
- dev->stats.rx_errors++;
- if (FD_CRC(status))
- dev->stats.rx_crc_errors++;
- if (FD_Align(status))
- dev->stats.rx_frame_errors++;
- if (FD_Resrc(status))
- dev->stats.rx_fifo_errors++;
- if (FD_DMA(status))
- dev->stats.rx_over_errors++;
- if (FD_Short(status))
- dev->stats.rx_length_errors++;
- }
- else
- {
- struct sk_buff *skb;
- pkt_len &= 0x3fff;
- skb = netdev_alloc_skb(dev, pkt_len + 16);
- if (skb == NULL)
- {
- printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name);
- dev->stats.rx_dropped++;
- break;
- }
- skb_reserve(skb, 2);
- outw(pbuf+10, ioaddr+READ_PTR);
- insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1);
- skb->protocol = eth_type_trans(skb,dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
- }
- outw(rx_block, ioaddr+WRITE_PTR);
- outw(0, ioaddr+DATAPORT);
- outw(0, ioaddr+DATAPORT);
- rx_block = rx_next;
- }
- } while (FD_Done(status) && boguscount--);
- lp->rx_ptr = rx_block;
-}
-
-/*
- * Hand a packet to the card for transmission
- * If we get here, we MUST have already checked
- * to make sure there is room in the transmit
- * buffer region.
- */
-
-static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
- unsigned short len)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short ioaddr = dev->base_addr;
-
- if (LOCKUP16 || lp->width) {
- /* Stop the CU so that there is no chance that it
- jumps off to a bogus address while we are writing the
- pointer to the next transmit packet in 8-bit mode --
- this eliminates the "CU wedged" errors in 8-bit mode.
- (Zoltan Szilagyi 10-12-96) */
- scb_command(dev, SCB_CUsuspend);
- outw(0xFFFF, ioaddr+SIGNAL_CA);
- }
-
- outw(lp->tx_head, ioaddr + WRITE_PTR);
-
- outw(0x0000, ioaddr + DATAPORT);
- outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
- outw(lp->tx_head+0x08, ioaddr + DATAPORT);
- outw(lp->tx_head+0x0e, ioaddr + DATAPORT);
-
- outw(0x0000, ioaddr + DATAPORT);
- outw(0x0000, ioaddr + DATAPORT);
- outw(lp->tx_head+0x08, ioaddr + DATAPORT);
-
- outw(0x8000|len, ioaddr + DATAPORT);
- outw(-1, ioaddr + DATAPORT);
- outw(lp->tx_head+0x16, ioaddr + DATAPORT);
- outw(0, ioaddr + DATAPORT);
-
- outsw(ioaddr + DATAPORT, buf, (len+1)>>1);
-
- outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR);
- outw(lp->tx_head, ioaddr + DATAPORT);
-
- dev->trans_start = jiffies;
- lp->tx_tail = lp->tx_head;
- if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
- lp->tx_head = TX_BUF_START;
- else
- lp->tx_head += TX_BUF_SIZE;
- if (lp->tx_head != lp->tx_reap)
- netif_wake_queue(dev);
-
- if (LOCKUP16 || lp->width) {
- /* Restart the CU so that the packet can actually
- be transmitted. (Zoltan Szilagyi 10-12-96) */
- scb_command(dev, SCB_CUresume);
- outw(0xFFFF, ioaddr+SIGNAL_CA);
- }
-
- dev->stats.tx_packets++;
- lp->last_tx = jiffies;
-}
-
-static const struct net_device_ops eexp_netdev_ops = {
- .ndo_open = eexp_open,
- .ndo_stop = eexp_close,
- .ndo_start_xmit = eexp_xmit,
- .ndo_set_rx_mode = eexp_set_multicast,
- .ndo_tx_timeout = eexp_timeout,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-/*
- * Sanity check the suspected EtherExpress card
- * Read hardware address, reset card, size memory and initialize buffer
- * memory pointers. These are held in netdev_priv(), in case someone has more
- * than one card in a machine.
- */
-
-static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
-{
- unsigned short hw_addr[3];
- unsigned char buswidth;
- unsigned int memory_size;
- int i;
- unsigned short xsum = 0;
- struct net_local *lp = netdev_priv(dev);
-
- printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr);
-
- outb(ASIC_RST, ioaddr+EEPROM_Ctrl);
- outb(0, ioaddr+EEPROM_Ctrl);
- udelay(500);
- outb(i586_RST, ioaddr+EEPROM_Ctrl);
-
- hw_addr[0] = eexp_hw_readeeprom(ioaddr,2);
- hw_addr[1] = eexp_hw_readeeprom(ioaddr,3);
- hw_addr[2] = eexp_hw_readeeprom(ioaddr,4);
-
- /* Standard Address or Compaq LTE Address */
- if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) ||
- (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00))))
- {
- printk(" rejected: invalid address %04x%04x%04x\n",
- hw_addr[2],hw_addr[1],hw_addr[0]);
- return -ENODEV;
- }
-
- /* Calculate the EEPROM checksum. Carry on anyway if it's bad,
- * though.
- */
- for (i = 0; i < 64; i++)
- xsum += eexp_hw_readeeprom(ioaddr, i);
- if (xsum != 0xbaba)
- printk(" (bad EEPROM xsum 0x%02x)", xsum);
-
- dev->base_addr = ioaddr;
- for ( i=0 ; i<6 ; i++ )
- dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i];
-
- {
- static const char irqmap[] = { 0, 9, 3, 4, 5, 10, 11, 0 };
- unsigned short setupval = eexp_hw_readeeprom(ioaddr,0);
-
- /* Use the IRQ from EEPROM if none was given */
- if (!dev->irq)
- dev->irq = irqmap[setupval>>13];
-
- if (dev->if_port == 0xff) {
- dev->if_port = !(setupval & 0x1000) ? AUI :
- eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC;
- }
-
- buswidth = !((setupval & 0x400) >> 10);
- }
-
- memset(lp, 0, sizeof(struct net_local));
- spin_lock_init(&lp->lock);
-
- printk("(IRQ %d, %s connector, %d-bit bus", dev->irq,
- eexp_ifmap[dev->if_port], buswidth?8:16);
-
- if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress"))
- return -EBUSY;
-
- eexp_hw_set_interface(dev);
-
- release_region(dev->base_addr + 0x300e, 1);
-
- /* Find out how much RAM we have on the card */
- outw(0, dev->base_addr + WRITE_PTR);
- for (i = 0; i < 32768; i++)
- outw(0, dev->base_addr + DATAPORT);
-
- for (memory_size = 0; memory_size < 64; memory_size++)
- {
- outw(memory_size<<10, dev->base_addr + READ_PTR);
- if (inw(dev->base_addr+DATAPORT))
- break;
- outw(memory_size<<10, dev->base_addr + WRITE_PTR);
- outw(memory_size | 0x5000, dev->base_addr+DATAPORT);
- outw(memory_size<<10, dev->base_addr + READ_PTR);
- if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000))
- break;
- }
-
- /* Sort out the number of buffers. We may have 16, 32, 48 or 64k
- * of RAM to play with.
- */
- lp->num_tx_bufs = 4;
- lp->rx_buf_end = 0x3ff6;
- switch (memory_size)
- {
- case 64:
- lp->rx_buf_end += 0x4000;
- case 48:
- lp->num_tx_bufs += 4;
- lp->rx_buf_end += 0x4000;
- case 32:
- lp->rx_buf_end += 0x4000;
- case 16:
- printk(", %dk RAM)\n", memory_size);
- break;
- default:
- printk(") bad memory size (%dk).\n", memory_size);
- return -ENODEV;
- break;
- }
-
- lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE);
- lp->width = buswidth;
-
- dev->netdev_ops = &eexp_netdev_ops;
- dev->watchdog_timeo = 2*HZ;
-
- return register_netdev(dev);
-}
-
-/*
- * Read a word from the EtherExpress on-board serial EEPROM.
- * The EEPROM contains 64 words of 16 bits.
- */
-static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr,
- unsigned char location)
-{
- unsigned short cmd = 0x180|(location&0x7f);
- unsigned short rval = 0,wval = EC_CS|i586_RST;
- int i;
-
- outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl);
- for (i=0x100 ; i ; i>>=1 )
- {
- if (cmd&i)
- wval |= EC_Wr;
- else
- wval &= ~EC_Wr;
-
- outb(wval,ioaddr+EEPROM_Ctrl);
- outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
- eeprom_delay();
- outb(wval,ioaddr+EEPROM_Ctrl);
- eeprom_delay();
- }
- wval &= ~EC_Wr;
- outb(wval,ioaddr+EEPROM_Ctrl);
- for (i=0x8000 ; i ; i>>=1 )
- {
- outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
- eeprom_delay();
- if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd)
- rval |= i;
- outb(wval,ioaddr+EEPROM_Ctrl);
- eeprom_delay();
- }
- wval &= ~EC_CS;
- outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
- eeprom_delay();
- outb(wval,ioaddr+EEPROM_Ctrl);
- eeprom_delay();
- return rval;
-}
-
-/*
- * Reap tx buffers and return last transmit status.
- * if ==0 then either:
- * a) we're not transmitting anything, so why are we here?
- * b) we've died.
- * otherwise, Stat_Busy(return) means we've still got some packets
- * to transmit, Stat_Done(return) means our buffers should be empty
- * again
- */
-
-static unsigned short eexp_hw_lasttxstat(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short tx_block = lp->tx_reap;
- unsigned short status;
-
- if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap)
- return 0x0000;
-
- do
- {
- outw(tx_block & ~31, dev->base_addr + SM_PTR);
- status = inw(dev->base_addr + SHADOW(tx_block));
- if (!Stat_Done(status))
- {
- lp->tx_link = tx_block;
- return status;
- }
- else
- {
- lp->last_tx_restart = 0;
- dev->stats.collisions += Stat_NoColl(status);
- if (!Stat_OK(status))
- {
- char *whatsup = NULL;
- dev->stats.tx_errors++;
- if (Stat_Abort(status))
- dev->stats.tx_aborted_errors++;
- if (Stat_TNoCar(status)) {
- whatsup = "aborted, no carrier";
- dev->stats.tx_carrier_errors++;
- }
- if (Stat_TNoCTS(status)) {
- whatsup = "aborted, lost CTS";
- dev->stats.tx_carrier_errors++;
- }
- if (Stat_TNoDMA(status)) {
- whatsup = "FIFO underran";
- dev->stats.tx_fifo_errors++;
- }
- if (Stat_TXColl(status)) {
- whatsup = "aborted, too many collisions";
- dev->stats.tx_aborted_errors++;
- }
- if (whatsup)
- printk(KERN_INFO "%s: transmit %s\n",
- dev->name, whatsup);
- }
- else
- dev->stats.tx_packets++;
- }
- if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
- lp->tx_reap = tx_block = TX_BUF_START;
- else
- lp->tx_reap = tx_block += TX_BUF_SIZE;
- netif_wake_queue(dev);
- }
- while (lp->tx_reap != lp->tx_head);
-
- lp->tx_link = lp->tx_tail + 0x08;
-
- return status;
-}
-
-/*
- * This should never happen. It is called when some higher routine detects
- * that the CU has stopped, to try to restart it from the last packet we knew
- * we were working on, or the idle loop if we had finished for the time.
- */
-
-static void eexp_hw_txrestart(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short ioaddr = dev->base_addr;
-
- lp->last_tx_restart = lp->tx_link;
- scb_wrcbl(dev, lp->tx_link);
- scb_command(dev, SCB_CUstart);
- outb(0,ioaddr+SIGNAL_CA);
-
- {
- unsigned short boguscount=50,failcount=5;
- while (!scb_status(dev))
- {
- if (!--boguscount)
- {
- if (--failcount)
- {
- printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev));
- scb_wrcbl(dev, lp->tx_link);
- scb_command(dev, SCB_CUstart);
- outb(0,ioaddr+SIGNAL_CA);
- boguscount = 100;
- }
- else
- {
- printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name);
- eexp_hw_init586(dev);
- netif_wake_queue(dev);
- return;
- }
- }
- }
- }
-}
-
-/*
- * Writes down the list of transmit buffers into card memory. Each
- * entry consists of an 82586 transmit command, followed by a jump
- * pointing to itself. When we want to transmit a packet, we write
- * the data into the appropriate transmit buffer and then modify the
- * preceding jump to point at the new transmit command. This means that
- * the 586 command unit is continuously active.
- */
-
-static void eexp_hw_txinit(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short tx_block = TX_BUF_START;
- unsigned short curtbuf;
- unsigned short ioaddr = dev->base_addr;
-
- for ( curtbuf=0 ; curtbuf<lp->num_tx_bufs ; curtbuf++ )
- {
- outw(tx_block, ioaddr + WRITE_PTR);
-
- outw(0x0000, ioaddr + DATAPORT);
- outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
- outw(tx_block+0x08, ioaddr + DATAPORT);
- outw(tx_block+0x0e, ioaddr + DATAPORT);
-
- outw(0x0000, ioaddr + DATAPORT);
- outw(0x0000, ioaddr + DATAPORT);
- outw(tx_block+0x08, ioaddr + DATAPORT);
-
- outw(0x8000, ioaddr + DATAPORT);
- outw(-1, ioaddr + DATAPORT);
- outw(tx_block+0x16, ioaddr + DATAPORT);
- outw(0x0000, ioaddr + DATAPORT);
-
- tx_block += TX_BUF_SIZE;
- }
- lp->tx_head = TX_BUF_START;
- lp->tx_reap = TX_BUF_START;
- lp->tx_tail = tx_block - TX_BUF_SIZE;
- lp->tx_link = lp->tx_tail + 0x08;
- lp->rx_buf_start = tx_block;
-
-}
-
-/*
- * Write the circular list of receive buffer descriptors to card memory.
- * The end of the list isn't marked, which means that the 82586 receive
- * unit will loop until buffers become available (this avoids it giving us
- * "out of resources" messages).
- */
-
-static void eexp_hw_rxinit(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short rx_block = lp->rx_buf_start;
- unsigned short ioaddr = dev->base_addr;
-
- lp->num_rx_bufs = 0;
- lp->rx_first = lp->rx_ptr = rx_block;
- do
- {
- lp->num_rx_bufs++;
-
- outw(rx_block, ioaddr + WRITE_PTR);
-
- outw(0, ioaddr + DATAPORT); outw(0, ioaddr+DATAPORT);
- outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT);
- outw(0xffff, ioaddr+DATAPORT);
-
- outw(0x0000, ioaddr+DATAPORT);
- outw(0xdead, ioaddr+DATAPORT);
- outw(0xdead, ioaddr+DATAPORT);
- outw(0xdead, ioaddr+DATAPORT);
- outw(0xdead, ioaddr+DATAPORT);
- outw(0xdead, ioaddr+DATAPORT);
- outw(0xdead, ioaddr+DATAPORT);
-
- outw(0x0000, ioaddr+DATAPORT);
- outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT);
- outw(rx_block + 0x20, ioaddr+DATAPORT);
- outw(0, ioaddr+DATAPORT);
- outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT);
-
- lp->rx_last = rx_block;
- rx_block += RX_BUF_SIZE;
- } while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE);
-
-
- /* Make first Rx frame descriptor point to first Rx buffer
- descriptor */
- outw(lp->rx_first + 6, ioaddr+WRITE_PTR);
- outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
-
- /* Close Rx frame descriptor ring */
- outw(lp->rx_last + 4, ioaddr+WRITE_PTR);
- outw(lp->rx_first, ioaddr+DATAPORT);
-
- /* Close Rx buffer descriptor ring */
- outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR);
- outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
-
-}
-
-/*
- * Un-reset the 586, and start the configuration sequence. We don't wait for
- * this to finish, but allow the interrupt handler to start the CU and RU for
- * us. We can't start the receive/transmission system up before we know that
- * the hardware is configured correctly.
- */
-
-static void eexp_hw_init586(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned short ioaddr = dev->base_addr;
- int i;
-
-#if NET_DEBUG > 6
- printk("%s: eexp_hw_init586()\n", dev->name);
-#endif
-
- lp->started = 0;
-
- set_loopback(dev);
-
- outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ);
-
- /* Download the startup code */
- outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR);
- outw(lp->width?0x0001:0x0000, ioaddr + 0x8006);
- outw(0x0000, ioaddr + 0x8008);
- outw(0x0000, ioaddr + 0x800a);
- outw(0x0000, ioaddr + 0x800c);
- outw(0x0000, ioaddr + 0x800e);
-
- for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) {
- int j;
- outw(i, ioaddr + SM_PTR);
- for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2)
- outw(start_code[(i+j)/2],
- ioaddr+0x4000+j);
- for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2)
- outw(start_code[(i+j+16)/2],
- ioaddr+0x8000+j);
- }
-
- /* Do we want promiscuous mode or multicast? */
- outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
- i = inw(ioaddr+SHADOW(CONF_PROMISC));
- outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
- ioaddr+SHADOW(CONF_PROMISC));
- lp->was_promisc = dev->flags & IFF_PROMISC;
-#if 0
- eexp_setup_filter(dev);
-#endif
-
- /* Write our hardware address */
- outw(CONF_HWADDR & ~31, ioaddr+SM_PTR);
- outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR));
- outw(((unsigned short *)dev->dev_addr)[1],
- ioaddr+SHADOW(CONF_HWADDR+2));
- outw(((unsigned short *)dev->dev_addr)[2],
- ioaddr+SHADOW(CONF_HWADDR+4));
-
- eexp_hw_txinit(dev);
- eexp_hw_rxinit(dev);
-
- outb(0,ioaddr+EEPROM_Ctrl);
- mdelay(5);
-
- scb_command(dev, 0xf000);
- outb(0,ioaddr+SIGNAL_CA);
-
- outw(0, ioaddr+SM_PTR);
-
- {
- unsigned short rboguscount=50,rfailcount=5;
- while (inw(ioaddr+0x4000))
- {
- if (!--rboguscount)
- {
- printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n",
- dev->name);
- scb_command(dev, 0);
- outb(0,ioaddr+SIGNAL_CA);
- rboguscount = 100;
- if (!--rfailcount)
- {
- printk(KERN_WARNING "%s: i82586 not responding, giving up.\n",
- dev->name);
- return;
- }
- }
- }
- }
-
- scb_wrcbl(dev, CONF_LINK);
- scb_command(dev, 0xf000|SCB_CUstart);
- outb(0,ioaddr+SIGNAL_CA);
-
- {
- unsigned short iboguscount=50,ifailcount=5;
- while (!scb_status(dev))
- {
- if (!--iboguscount)
- {
- if (--ifailcount)
- {
- printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n",
- dev->name, scb_status(dev), scb_rdcmd(dev));
- scb_wrcbl(dev, CONF_LINK);
- scb_command(dev, 0xf000|SCB_CUstart);
- outb(0,ioaddr+SIGNAL_CA);
- iboguscount = 100;
- }
- else
- {
- printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name);
- return;
- }
- }
- }
- }
-
- clear_loopback(dev);
- outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ);
-
- lp->init_time = jiffies;
-#if NET_DEBUG > 6
- printk("%s: leaving eexp_hw_init586()\n", dev->name);
-#endif
-}
-
-static void eexp_setup_filter(struct net_device *dev)
-{
- struct netdev_hw_addr *ha;
- unsigned short ioaddr = dev->base_addr;
- int count = netdev_mc_count(dev);
- int i;
- if (count > 8) {
- printk(KERN_INFO "%s: too many multicast addresses (%d)\n",
- dev->name, count);
- count = 8;
- }
-
- outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR);
- outw(6*count, ioaddr+SHADOW(CONF_NR_MULTICAST));
- i = 0;
- netdev_for_each_mc_addr(ha, dev) {
- unsigned short *data = (unsigned short *) ha->addr;
-
- if (i == count)
- break;
- outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR);
- outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i)));
- outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR);
- outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2));
- outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR);
- outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4));
- i++;
- }
-}
-
-/*
- * Set or clear the multicast filter for this adaptor.
- */
-static void
-eexp_set_multicast(struct net_device *dev)
-{
- unsigned short ioaddr = dev->base_addr;
- struct net_local *lp = netdev_priv(dev);
- int kick = 0, i;
- if ((dev->flags & IFF_PROMISC) != lp->was_promisc) {
- outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
- i = inw(ioaddr+SHADOW(CONF_PROMISC));
- outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
- ioaddr+SHADOW(CONF_PROMISC));
- lp->was_promisc = dev->flags & IFF_PROMISC;
- kick = 1;
- }
- if (!(dev->flags & IFF_PROMISC)) {
- eexp_setup_filter(dev);
- if (lp->old_mc_count != netdev_mc_count(dev)) {
- kick = 1;
- lp->old_mc_count = netdev_mc_count(dev);
- }
- }
- if (kick) {
- unsigned long oj;
- scb_command(dev, SCB_CUsuspend);
- outb(0, ioaddr+SIGNAL_CA);
- outb(0, ioaddr+SIGNAL_CA);
-#if 0
- printk("%s: waiting for CU to go suspended\n", dev->name);
-#endif
- oj = jiffies;
- while ((SCB_CUstat(scb_status(dev)) == 2) &&
- (time_before(jiffies, oj + 2000)));
- if (SCB_CUstat(scb_status(dev)) == 2)
- printk("%s: warning, CU didn't stop\n", dev->name);
- lp->started &= ~(STARTED_CU);
- scb_wrcbl(dev, CONF_LINK);
- scb_command(dev, SCB_CUstart);
- outb(0, ioaddr+SIGNAL_CA);
- }
-}
-
-
-/*
- * MODULE stuff
- */
-
-#ifdef MODULE
-
-#define EEXP_MAX_CARDS 4 /* max number of cards to support */
-
-static struct net_device *dev_eexp[EEXP_MAX_CARDS];
-static int irq[EEXP_MAX_CARDS];
-static int io[EEXP_MAX_CARDS];
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)");
-MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)");
-MODULE_LICENSE("GPL");
-
-
-/* Ideally the user would give us io=, irq= for every card. If any parameters
- * are specified, we verify and then use them. If no parameters are given, we
- * autoprobe for one card only.
- */
-int __init init_module(void)
-{
- struct net_device *dev;
- int this_dev, found = 0;
-
- for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
- dev = alloc_etherdev(sizeof(struct net_local));
- dev->irq = irq[this_dev];
- dev->base_addr = io[this_dev];
- if (io[this_dev] == 0) {
- if (this_dev)
- break;
- printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n");
- }
- if (do_express_probe(dev) == 0) {
- dev_eexp[this_dev] = dev;
- found++;
- continue;
- }
- printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]);
- free_netdev(dev);
- break;
- }
- if (found)
- return 0;
- return -ENXIO;
-}
-
-void __exit cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
- struct net_device *dev = dev_eexp[this_dev];
- if (dev) {
- unregister_netdev(dev);
- free_netdev(dev);
- }
- }
-}
-#endif
-
-/*
- * Local Variables:
- * c-file-style: "linux"
- * tab-width: 8
- * End:
- */
diff --git a/drivers/net/ethernet/i825xx/eexpress.h b/drivers/net/ethernet/i825xx/eexpress.h
deleted file mode 100644
index dc9c6ea289e9..000000000000
--- a/drivers/net/ethernet/i825xx/eexpress.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * eexpress.h: Intel EtherExpress16 defines
- */
-
-/*
- * EtherExpress card register addresses
- * as offsets from the base IO region (dev->base_addr)
- */
-
-#define DATAPORT 0x0000
-#define WRITE_PTR 0x0002
-#define READ_PTR 0x0004
-#define SIGNAL_CA 0x0006
-#define SET_IRQ 0x0007
-#define SM_PTR 0x0008
-#define MEM_Dec 0x000a
-#define MEM_Ctrl 0x000b
-#define MEM_Page_Ctrl 0x000c
-#define Config 0x000d
-#define EEPROM_Ctrl 0x000e
-#define ID_PORT 0x000f
-#define MEM_ECtrl 0x000f
-
-/*
- * card register defines
- */
-
-/* SET_IRQ */
-#define SIRQ_en 0x08
-#define SIRQ_dis 0x00
-
-/* EEPROM_Ctrl */
-#define EC_Clk 0x01
-#define EC_CS 0x02
-#define EC_Wr 0x04
-#define EC_Rd 0x08
-#define ASIC_RST 0x40
-#define i586_RST 0x80
-
-#define eeprom_delay() { udelay(40); }
-
-/*
- * i82586 Memory Configuration
- */
-
-/* (System Configuration Pointer) System start up block, read after 586_RST */
-#define SCP_START 0xfff6
-
-/* Intermediate System Configuration Pointer */
-#define ISCP_START 0x0000
-
-/* System Command Block */
-#define SCB_START 0x0008
-
-/* Start of buffer region. Everything before this is used for control
- * structures and the CU configuration program. The memory layout is
- * determined in eexp_hw_probe(), once we know how much memory is
- * available on the card.
- */
-
-#define TX_BUF_START 0x0100
-
-#define TX_BUF_SIZE ((24+ETH_FRAME_LEN+31)&~0x1f)
-#define RX_BUF_SIZE ((32+ETH_FRAME_LEN+31)&~0x1f)
-
-/*
- * SCB defines
- */
-
-/* these functions take the SCB status word and test the relevant status bit */
-#define SCB_complete(s) (((s) & 0x8000) != 0)
-#define SCB_rxdframe(s) (((s) & 0x4000) != 0)
-#define SCB_CUdead(s) (((s) & 0x2000) != 0)
-#define SCB_RUdead(s) (((s) & 0x1000) != 0)
-#define SCB_ack(s) ((s) & 0xf000)
-
-/* Command unit status: 0=idle, 1=suspended, 2=active */
-#define SCB_CUstat(s) (((s)&0x0300)>>8)
-
-/* Receive unit status: 0=idle, 1=suspended, 2=out of resources, 4=ready */
-#define SCB_RUstat(s) (((s)&0x0070)>>4)
-
-/* SCB commands */
-#define SCB_CUnop 0x0000
-#define SCB_CUstart 0x0100
-#define SCB_CUresume 0x0200
-#define SCB_CUsuspend 0x0300
-#define SCB_CUabort 0x0400
-#define SCB_resetchip 0x0080
-
-#define SCB_RUnop 0x0000
-#define SCB_RUstart 0x0010
-#define SCB_RUresume 0x0020
-#define SCB_RUsuspend 0x0030
-#define SCB_RUabort 0x0040
-
-/*
- * Command block defines
- */
-
-#define Stat_Done(s) (((s) & 0x8000) != 0)
-#define Stat_Busy(s) (((s) & 0x4000) != 0)
-#define Stat_OK(s) (((s) & 0x2000) != 0)
-#define Stat_Abort(s) (((s) & 0x1000) != 0)
-#define Stat_STFail (((s) & 0x0800) != 0)
-#define Stat_TNoCar(s) (((s) & 0x0400) != 0)
-#define Stat_TNoCTS(s) (((s) & 0x0200) != 0)
-#define Stat_TNoDMA(s) (((s) & 0x0100) != 0)
-#define Stat_TDefer(s) (((s) & 0x0080) != 0)
-#define Stat_TColl(s) (((s) & 0x0040) != 0)
-#define Stat_TXColl(s) (((s) & 0x0020) != 0)
-#define Stat_NoColl(s) ((s) & 0x000f)
-
-/* Cmd_END will end AFTER the command if this is the first
- * command block after an SCB_CUstart, but BEFORE the command
- * for all subsequent commands. Best strategy is to place
- * Cmd_INT on the last command in the sequence, followed by a
- * dummy Cmd_Nop with Cmd_END after this.
- */
-
-#define Cmd_END 0x8000
-#define Cmd_SUS 0x4000
-#define Cmd_INT 0x2000
-
-#define Cmd_Nop 0x0000
-#define Cmd_SetAddr 0x0001
-#define Cmd_Config 0x0002
-#define Cmd_MCast 0x0003
-#define Cmd_Xmit 0x0004
-#define Cmd_TDR 0x0005
-#define Cmd_Dump 0x0006
-#define Cmd_Diag 0x0007
-
-
-/*
- * Frame Descriptor (Receive block) defines
- */
-
-#define FD_Done(s) (((s) & 0x8000) != 0)
-#define FD_Busy(s) (((s) & 0x4000) != 0)
-#define FD_OK(s) (((s) & 0x2000) != 0)
-
-#define FD_CRC(s) (((s) & 0x0800) != 0)
-#define FD_Align(s) (((s) & 0x0400) != 0)
-#define FD_Resrc(s) (((s) & 0x0200) != 0)
-#define FD_DMA(s) (((s) & 0x0100) != 0)
-#define FD_Short(s) (((s) & 0x0080) != 0)
-#define FD_NoEOF(s) (((s) & 0x0040) != 0)
-
-struct rfd_header {
- volatile unsigned long flags;
- volatile unsigned short link;
- volatile unsigned short rbd_offset;
- volatile unsigned short dstaddr1;
- volatile unsigned short dstaddr2;
- volatile unsigned short dstaddr3;
- volatile unsigned short srcaddr1;
- volatile unsigned short srcaddr2;
- volatile unsigned short srcaddr3;
- volatile unsigned short length;
-
- /* This is actually a Receive Buffer Descriptor. The way we
- * arrange memory means that an RBD always follows the RFD that
- * points to it, so they might as well be in the same structure.
- */
- volatile unsigned short actual_count;
- volatile unsigned short next_rbd;
- volatile unsigned short buf_addr1;
- volatile unsigned short buf_addr2;
- volatile unsigned short size;
-};
-
-/* Returned data from the Time Domain Reflectometer */
-
-#define TDR_LINKOK (1<<15)
-#define TDR_XCVRPROBLEM (1<<14)
-#define TDR_OPEN (1<<13)
-#define TDR_SHORT (1<<12)
-#define TDR_TIME 0x7ff