diff options
Diffstat (limited to 'drivers/net/wireless/st/cw1200/cw1200_sdio.c')
| -rw-r--r-- | drivers/net/wireless/st/cw1200/cw1200_sdio.c | 42 |
1 files changed, 25 insertions, 17 deletions
diff --git a/drivers/net/wireless/st/cw1200/cw1200_sdio.c b/drivers/net/wireless/st/cw1200/cw1200_sdio.c index 4c30b5772ce0..00c4731d8f8e 100644 --- a/drivers/net/wireless/st/cw1200/cw1200_sdio.c +++ b/drivers/net/wireless/st/cw1200/cw1200_sdio.c @@ -8,7 +8,7 @@ #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include <linux/mmc/host.h> #include <linux/mmc/sdio_func.h> @@ -178,12 +178,15 @@ static int cw1200_sdio_irq_unsubscribe(struct hwbus_priv *self) return ret; } +/* Like the rest of the driver, this only supports one device per system */ +static struct gpio_desc *cw1200_reset; +static struct gpio_desc *cw1200_powerup; + static int cw1200_sdio_off(const struct cw1200_platform_data_sdio *pdata) { - if (pdata->reset) { - gpio_set_value(pdata->reset, 0); + if (cw1200_reset) { + gpiod_set_value(cw1200_reset, 0); msleep(30); /* Min is 2 * CLK32K cycles */ - gpio_free(pdata->reset); } if (pdata->power_ctrl) @@ -196,16 +199,21 @@ static int cw1200_sdio_off(const struct cw1200_platform_data_sdio *pdata) static int cw1200_sdio_on(const struct cw1200_platform_data_sdio *pdata) { - /* Ensure I/Os are pulled low */ - if (pdata->reset) { - gpio_request(pdata->reset, "cw1200_wlan_reset"); - gpio_direction_output(pdata->reset, 0); + /* Ensure I/Os are pulled low (reset is active low) */ + cw1200_reset = devm_gpiod_get_optional(NULL, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(cw1200_reset)) { + pr_err("could not get CW1200 SDIO reset GPIO\n"); + return PTR_ERR(cw1200_reset); } - if (pdata->powerup) { - gpio_request(pdata->powerup, "cw1200_wlan_powerup"); - gpio_direction_output(pdata->powerup, 0); + gpiod_set_consumer_name(cw1200_reset, "cw1200_wlan_reset"); + cw1200_powerup = devm_gpiod_get_optional(NULL, "powerup", GPIOD_OUT_LOW); + if (IS_ERR(cw1200_powerup)) { + pr_err("could not get CW1200 SDIO powerup GPIO\n"); + return PTR_ERR(cw1200_powerup); } - if (pdata->reset || pdata->powerup) + gpiod_set_consumer_name(cw1200_powerup, "cw1200_wlan_powerup"); + + if (cw1200_reset || cw1200_powerup) msleep(10); /* Settle time? */ /* Enable 3v3 and 1v8 to hardware */ @@ -226,13 +234,13 @@ static int cw1200_sdio_on(const struct cw1200_platform_data_sdio *pdata) } /* Enable POWERUP signal */ - if (pdata->powerup) { - gpio_set_value(pdata->powerup, 1); + if (cw1200_powerup) { + gpiod_set_value(cw1200_powerup, 1); msleep(250); /* or more..? */ } - /* Enable RSTn signal */ - if (pdata->reset) { - gpio_set_value(pdata->reset, 1); + /* Deassert RSTn signal, note active low */ + if (cw1200_reset) { + gpiod_set_value(cw1200_reset, 0); msleep(50); /* Or more..? */ } return 0; |