diff options
Diffstat (limited to 'drivers/pci/controller/pcie-mediatek.c')
| -rw-r--r-- | drivers/pci/controller/pcie-mediatek.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index 2f3f974977a3..ddfbd4aebdec 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -365,19 +365,12 @@ static int mtk_pcie_config_read(struct pci_bus *bus, unsigned int devfn, { struct mtk_pcie_port *port; u32 bn = bus->number; - int ret; port = mtk_pcie_find_port(bus, devfn); - if (!port) { - *val = ~0; + if (!port) return PCIBIOS_DEVICE_NOT_FOUND; - } - - ret = mtk_pcie_hw_rd_cfg(port, bn, devfn, where, size, val); - if (ret) - *val = ~0; - return ret; + return mtk_pcie_hw_rd_cfg(port, bn, devfn, where, size, val); } static int mtk_pcie_config_write(struct pci_bus *bus, unsigned int devfn, @@ -702,6 +695,13 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port) */ writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL); + /* + * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and + * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should + * be delayed 100ms (TPVPERL) for the power and clock to become stable. + */ + msleep(100); + /* De-assert PHY, PE, PIPE, MAC and configuration reset */ val = readl(port->base + PCIE_RST_CTRL); val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB | |