summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001/pm80xx_hwi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pm8001/pm80xx_hwi.c')
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 700530e969ac..45ecd9639977 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1952,7 +1952,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
param);
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
} else {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_PROTO_RESPONSE;
@@ -2487,7 +2487,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
/* check if response is for SEND READ LOG */
if (pm8001_dev &&
(pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
@@ -3042,7 +3042,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
case IO_SUCCESS:
pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
@@ -3084,17 +3084,17 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
case IO_ERROR_HW_TIMEOUT:
pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_BUSY;
+ ts->stat = SAS_SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_BREAK:
pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_BUSY;
+ ts->stat = SAS_SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_BUSY;
+ ts->stat = SAS_SAM_STAT_BUSY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
pm8001_dbg(pm8001_ha, IO,
@@ -4699,7 +4699,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
spin_lock_irqsave(&task->task_state_lock, flags);
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
task->task_state_flags |= SAS_TASK_STATE_DONE;