diff options
Diffstat (limited to 'drivers/serial/mpsc.c')
| -rw-r--r-- | drivers/serial/mpsc.c | 260 |
1 files changed, 256 insertions, 4 deletions
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index 0ca83ac31d07..94681922ea0a 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -1,6 +1,4 @@ /* - * drivers/serial/mpsc.c - * * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, * GT64260, MV64340, MV64360, GT96100, ... ). * @@ -52,9 +50,263 @@ * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. */ +#include <linux/config.h> + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/mv643xx.h> #include <linux/platform_device.h> -#include "mpsc.h" +#include <asm/io.h> +#include <asm/irq.h> + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#define MPSC_NUM_CTLRS 2 + +/* + * Descriptors and buffers must be cache line aligned. + * Buffers lengths must be multiple of cache line size. + * Number of Tx & Rx descriptors must be powers of 2. + */ +#define MPSC_RXR_ENTRIES 32 +#define MPSC_RXRE_SIZE dma_get_cache_alignment() +#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) +#define MPSC_RXBE_SIZE dma_get_cache_alignment() +#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) + +#define MPSC_TXR_ENTRIES 32 +#define MPSC_TXRE_SIZE dma_get_cache_alignment() +#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) +#define MPSC_TXBE_SIZE dma_get_cache_alignment() +#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) + +#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \ + MPSC_TXR_SIZE + MPSC_TXB_SIZE + \ + dma_get_cache_alignment() /* for alignment */) + +/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ +struct mpsc_rx_desc { + u16 bufsize; + u16 bytecnt; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +struct mpsc_tx_desc { + u16 bytecnt; + u16 shadow; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +/* + * Some regs that have the erratum that you can't read them are are shared + * between the two MPSC controllers. This struct contains those shared regs. + */ +struct mpsc_shared_regs { + phys_addr_t mpsc_routing_base_p; + phys_addr_t sdma_intr_base_p; + + void __iomem *mpsc_routing_base; + void __iomem *sdma_intr_base; + + u32 MPSC_MRR_m; + u32 MPSC_RCRR_m; + u32 MPSC_TCRR_m; + u32 SDMA_INTR_CAUSE_m; + u32 SDMA_INTR_MASK_m; +}; + +/* The main driver data structure */ +struct mpsc_port_info { + struct uart_port port; /* Overlay uart_port structure */ + + /* Internal driver state for this ctlr */ + u8 ready; + u8 rcv_data; + tcflag_t c_iflag; /* save termios->c_iflag */ + tcflag_t c_cflag; /* save termios->c_cflag */ + + /* Info passed in from platform */ + u8 mirror_regs; /* Need to mirror regs? */ + u8 cache_mgmt; /* Need manual cache mgmt? */ + u8 brg_can_tune; /* BRG has baud tuning? */ + u32 brg_clk_src; + u16 mpsc_max_idle; + int default_baud; + int default_bits; + int default_parity; + int default_flow; + + /* Physical addresses of various blocks of registers (from platform) */ + phys_addr_t mpsc_base_p; + phys_addr_t sdma_base_p; + phys_addr_t brg_base_p; + + /* Virtual addresses of various blocks of registers (from platform) */ + void __iomem *mpsc_base; + void __iomem *sdma_base; + void __iomem *brg_base; + + /* Descriptor ring and buffer allocations */ + void *dma_region; + dma_addr_t dma_region_p; + + dma_addr_t rxr; /* Rx descriptor ring */ + dma_addr_t rxr_p; /* Phys addr of rxr */ + u8 *rxb; /* Rx Ring I/O buf */ + u8 *rxb_p; /* Phys addr of rxb */ + u32 rxr_posn; /* First desc w/ Rx data */ + + dma_addr_t txr; /* Tx descriptor ring */ + dma_addr_t txr_p; /* Phys addr of txr */ + u8 *txb; /* Tx Ring I/O buf */ + u8 *txb_p; /* Phys addr of txb */ + int txr_head; /* Where new data goes */ + int txr_tail; /* Where sent data comes off */ + + /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ + u32 MPSC_MPCR_m; + u32 MPSC_CHR_1_m; + u32 MPSC_CHR_2_m; + u32 MPSC_CHR_10_m; + u32 BRG_BCR_m; + struct mpsc_shared_regs *shared_regs; +}; + +/* Hooks to platform-specific code */ +int mpsc_platform_register_driver(void); +void mpsc_platform_unregister_driver(void); + +/* Hooks back in to mpsc common to be called by platform-specific code */ +struct mpsc_port_info *mpsc_device_probe(int index); +struct mpsc_port_info *mpsc_device_remove(int index); + +/* Main MPSC Configuration Register Offsets */ +#define MPSC_MMCRL 0x0000 +#define MPSC_MMCRH 0x0004 +#define MPSC_MPCR 0x0008 +#define MPSC_CHR_1 0x000c +#define MPSC_CHR_2 0x0010 +#define MPSC_CHR_3 0x0014 +#define MPSC_CHR_4 0x0018 +#define MPSC_CHR_5 0x001c +#define MPSC_CHR_6 0x0020 +#define MPSC_CHR_7 0x0024 +#define MPSC_CHR_8 0x0028 +#define MPSC_CHR_9 0x002c +#define MPSC_CHR_10 0x0030 +#define MPSC_CHR_11 0x0034 + +#define MPSC_MPCR_FRZ (1 << 9) +#define MPSC_MPCR_CL_5 0 +#define MPSC_MPCR_CL_6 1 +#define MPSC_MPCR_CL_7 2 +#define MPSC_MPCR_CL_8 3 +#define MPSC_MPCR_SBL_1 0 +#define MPSC_MPCR_SBL_2 1 + +#define MPSC_CHR_2_TEV (1<<1) +#define MPSC_CHR_2_TA (1<<7) +#define MPSC_CHR_2_TTCS (1<<9) +#define MPSC_CHR_2_REV (1<<17) +#define MPSC_CHR_2_RA (1<<23) +#define MPSC_CHR_2_CRD (1<<25) +#define MPSC_CHR_2_EH (1<<31) +#define MPSC_CHR_2_PAR_ODD 0 +#define MPSC_CHR_2_PAR_SPACE 1 +#define MPSC_CHR_2_PAR_EVEN 2 +#define MPSC_CHR_2_PAR_MARK 3 + +/* MPSC Signal Routing */ +#define MPSC_MRR 0x0000 +#define MPSC_RCRR 0x0004 +#define MPSC_TCRR 0x0008 + +/* Serial DMA Controller Interface Registers */ +#define SDMA_SDC 0x0000 +#define SDMA_SDCM 0x0008 +#define SDMA_RX_DESC 0x0800 +#define SDMA_RX_BUF_PTR 0x0808 +#define SDMA_SCRDP 0x0810 +#define SDMA_TX_DESC 0x0c00 +#define SDMA_SCTDP 0x0c10 +#define SDMA_SFTDP 0x0c14 + +#define SDMA_DESC_CMDSTAT_PE (1<<0) +#define SDMA_DESC_CMDSTAT_CDL (1<<1) +#define SDMA_DESC_CMDSTAT_FR (1<<3) +#define SDMA_DESC_CMDSTAT_OR (1<<6) +#define SDMA_DESC_CMDSTAT_BR (1<<9) +#define SDMA_DESC_CMDSTAT_MI (1<<10) +#define SDMA_DESC_CMDSTAT_A (1<<11) +#define SDMA_DESC_CMDSTAT_AM (1<<12) +#define SDMA_DESC_CMDSTAT_CT (1<<13) +#define SDMA_DESC_CMDSTAT_C (1<<14) +#define SDMA_DESC_CMDSTAT_ES (1<<15) +#define SDMA_DESC_CMDSTAT_L (1<<16) +#define SDMA_DESC_CMDSTAT_F (1<<17) +#define SDMA_DESC_CMDSTAT_P (1<<18) +#define SDMA_DESC_CMDSTAT_EI (1<<23) +#define SDMA_DESC_CMDSTAT_O (1<<31) + +#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \ + SDMA_DESC_CMDSTAT_EI) + +#define SDMA_SDC_RFT (1<<0) +#define SDMA_SDC_SFM (1<<1) +#define SDMA_SDC_BLMR (1<<6) +#define SDMA_SDC_BLMT (1<<7) +#define SDMA_SDC_POVR (1<<8) +#define SDMA_SDC_RIFB (1<<9) + +#define SDMA_SDCM_ERD (1<<7) +#define SDMA_SDCM_AR (1<<15) +#define SDMA_SDCM_STD (1<<16) +#define SDMA_SDCM_TXD (1<<23) +#define SDMA_SDCM_AT (1<<31) + +#define SDMA_0_CAUSE_RXBUF (1<<0) +#define SDMA_0_CAUSE_RXERR (1<<1) +#define SDMA_0_CAUSE_TXBUF (1<<2) +#define SDMA_0_CAUSE_TXEND (1<<3) +#define SDMA_1_CAUSE_RXBUF (1<<8) +#define SDMA_1_CAUSE_RXERR (1<<9) +#define SDMA_1_CAUSE_TXBUF (1<<10) +#define SDMA_1_CAUSE_TXEND (1<<11) + +#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \ + SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) +#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \ + SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) + +/* SDMA Interrupt registers */ +#define SDMA_INTR_CAUSE 0x0000 +#define SDMA_INTR_MASK 0x0080 + +/* Baud Rate Generator Interface Registers */ +#define BRG_BCR 0x0000 +#define BRG_BTR 0x0004 /* * Define how this driver is known to the outside (we've been assigned a @@ -1165,7 +1417,7 @@ mpsc_startup(struct uart_port *port) flag = SA_SHIRQ; if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, - "mpsc/sdma", pi)) + "mpsc-sdma", pi)) printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", pi->port.irq); |