diff options
Diffstat (limited to 'drivers/staging/fbtft')
-rw-r--r-- | drivers/staging/fbtft/Kconfig | 21 | ||||
-rw-r--r-- | drivers/staging/fbtft/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_seps525.c | 213 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_uc1611.c | 22 | ||||
-rw-r--r-- | drivers/staging/fbtft/fbtft-core.c | 129 | ||||
-rw-r--r-- | drivers/staging/fbtft/fbtft.h | 4 |
6 files changed, 304 insertions, 86 deletions
diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig index cb61c2a772bd..dad1ddcd7b0c 100644 --- a/drivers/staging/fbtft/Kconfig +++ b/drivers/staging/fbtft/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 menuconfig FB_TFT tristate "Support for small TFT LCD display modules" - depends on FB && SPI && OF + depends on FB && SPI depends on GPIOLIB || COMPILE_TEST select FB_SYS_FILLRECT select FB_SYS_COPYAREA @@ -95,8 +95,8 @@ config FB_TFT_PCD8544 Generic Framebuffer support for PCD8544 config FB_TFT_RA8875 - tristate "FB driver for the RA8875 LCD Controller" - depends on FB_TFT + tristate "FB driver for the RA8875 LCD Controller" + depends on FB_TFT help Generic Framebuffer support for RA8875 @@ -112,6 +112,13 @@ config FB_TFT_S6D1121 help Generic Framebuffer support for S6D1121 +config FB_TFT_SEPS525 + tristate "FB driver for the SEPS525 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for SEPS525 + Say Y if you have such a display that utilizes this controller. + config FB_TFT_SH1106 tristate "FB driver for the SH1106 OLED Controller" depends on FB_TFT @@ -125,10 +132,10 @@ config FB_TFT_SSD1289 Framebuffer support for SSD1289 config FB_TFT_SSD1305 - tristate "FB driver for the SSD1305 OLED Controller" - depends on FB_TFT - help - Framebuffer support for SSD1305 + tristate "FB driver for the SSD1305 OLED Controller" + depends on FB_TFT + help + Framebuffer support for SSD1305 config FB_TFT_SSD1306 tristate "FB driver for the SSD1306 OLED Controller" diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile index 27af43f32f81..e87193f7df14 100644 --- a/drivers/staging/fbtft/Makefile +++ b/drivers/staging/fbtft/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_FB_TFT_PCD8544) += fb_pcd8544.o obj-$(CONFIG_FB_TFT_RA8875) += fb_ra8875.o obj-$(CONFIG_FB_TFT_S6D02A1) += fb_s6d02a1.o obj-$(CONFIG_FB_TFT_S6D1121) += fb_s6d1121.o +obj-$(CONFIG_FB_TFT_SEPS525) += fb_seps525.o obj-$(CONFIG_FB_TFT_SH1106) += fb_sh1106.o obj-$(CONFIG_FB_TFT_SSD1289) += fb_ssd1289.o obj-$(CONFIG_FB_TFT_SSD1305) += fb_ssd1305.o diff --git a/drivers/staging/fbtft/fb_seps525.c b/drivers/staging/fbtft/fb_seps525.c new file mode 100644 index 000000000000..05882e2cde7f --- /dev/null +++ b/drivers/staging/fbtft/fb_seps525.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * FB driver for the NHD-1.69-160128UGC3 (Newhaven Display International, Inc.) + * using the SEPS525 (Syncoam) LCD Controller + * + * Copyright (C) 2016 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_seps525" +#define WIDTH 160 +#define HEIGHT 128 + +#define SEPS525_INDEX 0x00 +#define SEPS525_STATUS_RD 0x01 +#define SEPS525_OSC_CTL 0x02 +#define SEPS525_IREF 0x80 +#define SEPS525_CLOCK_DIV 0x03 +#define SEPS525_REDUCE_CURRENT 0x04 +#define SEPS525_SOFT_RST 0x05 +#define SEPS525_DISP_ONOFF 0x06 +#define SEPS525_PRECHARGE_TIME_R 0x08 +#define SEPS525_PRECHARGE_TIME_G 0x09 +#define SEPS525_PRECHARGE_TIME_B 0x0A +#define SEPS525_PRECHARGE_CURRENT_R 0x0B +#define SEPS525_PRECHARGE_CURRENT_G 0x0C +#define SEPS525_PRECHARGE_CURRENT_B 0x0D +#define SEPS525_DRIVING_CURRENT_R 0x10 +#define SEPS525_DRIVING_CURRENT_G 0x11 +#define SEPS525_DRIVING_CURRENT_B 0x12 +#define SEPS525_DISPLAYMODE_SET 0x13 +#define SEPS525_RGBIF 0x14 +#define SEPS525_RGB_POL 0x15 +#define SEPS525_MEMORY_WRITEMODE 0x16 +#define SEPS525_MX1_ADDR 0x17 +#define SEPS525_MX2_ADDR 0x18 +#define SEPS525_MY1_ADDR 0x19 +#define SEPS525_MY2_ADDR 0x1A +#define SEPS525_MEMORY_ACCESS_POINTER_X 0x20 +#define SEPS525_MEMORY_ACCESS_POINTER_Y 0x21 +#define SEPS525_DDRAM_DATA_ACCESS_PORT 0x22 +#define SEPS525_GRAY_SCALE_TABLE_INDEX 0x50 +#define SEPS525_GRAY_SCALE_TABLE_DATA 0x51 +#define SEPS525_DUTY 0x28 +#define SEPS525_DSL 0x29 +#define SEPS525_D1_DDRAM_FAC 0x2E +#define SEPS525_D1_DDRAM_FAR 0x2F +#define SEPS525_D2_DDRAM_SAC 0x31 +#define SEPS525_D2_DDRAM_SAR 0x32 +#define SEPS525_SCR1_FX1 0x33 +#define SEPS525_SCR1_FX2 0x34 +#define SEPS525_SCR1_FY1 0x35 +#define SEPS525_SCR1_FY2 0x36 +#define SEPS525_SCR2_SX1 0x37 +#define SEPS525_SCR2_SX2 0x38 +#define SEPS525_SCR2_SY1 0x39 +#define SEPS525_SCR2_SY2 0x3A +#define SEPS525_SCREEN_SAVER_CONTEROL 0x3B +#define SEPS525_SS_SLEEP_TIMER 0x3C +#define SEPS525_SCREEN_SAVER_MODE 0x3D +#define SEPS525_SS_SCR1_FU 0x3E +#define SEPS525_SS_SCR1_MXY 0x3F +#define SEPS525_SS_SCR2_FU 0x40 +#define SEPS525_SS_SCR2_MXY 0x41 +#define SEPS525_MOVING_DIRECTION 0x42 +#define SEPS525_SS_SCR2_SX1 0x47 +#define SEPS525_SS_SCR2_SX2 0x48 +#define SEPS525_SS_SCR2_SY1 0x49 +#define SEPS525_SS_SCR2_SY2 0x4A + +/* SEPS525_DISPLAYMODE_SET */ +#define MODE_SWAP_BGR BIT(7) +#define MODE_SM BIT(6) +#define MODE_RD BIT(5) +#define MODE_CD BIT(4) + +#define seps525_use_window 0 /* FBTFT doesn't really use it today */ + +/* Init sequence taken from: Arduino Library for the Adafruit 2.2" display */ +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + usleep_range(1000, 5000); + + /* Disable Oscillator Power Down */ + write_reg(par, SEPS525_REDUCE_CURRENT, 0x03); + usleep_range(1000, 5000); + /* Set Normal Driving Current */ + write_reg(par, SEPS525_REDUCE_CURRENT, 0x00); + usleep_range(1000, 5000); + + write_reg(par, SEPS525_SCREEN_SAVER_CONTEROL, 0x00); + /* Set EXPORT1 Pin at Internal Clock */ + write_reg(par, SEPS525_OSC_CTL, 0x01); + /* Set Clock as 120 Frames/Sec */ + write_reg(par, SEPS525_CLOCK_DIV, 0x90); + /* Set Reference Voltage Controlled by External Resister */ + write_reg(par, SEPS525_IREF, 0x01); + + /* precharge time R G B */ + write_reg(par, SEPS525_PRECHARGE_TIME_R, 0x04); + write_reg(par, SEPS525_PRECHARGE_TIME_G, 0x05); + write_reg(par, SEPS525_PRECHARGE_TIME_B, 0x05); + + /* precharge current R G B (uA) */ + write_reg(par, SEPS525_PRECHARGE_CURRENT_R, 0x9D); + write_reg(par, SEPS525_PRECHARGE_CURRENT_G, 0x8C); + write_reg(par, SEPS525_PRECHARGE_CURRENT_B, 0x57); + + /* driving current R G B (uA) */ + write_reg(par, SEPS525_DRIVING_CURRENT_R, 0x56); + write_reg(par, SEPS525_DRIVING_CURRENT_G, 0x4D); + write_reg(par, SEPS525_DRIVING_CURRENT_B, 0x46); + /* Set Color Sequence */ + write_reg(par, SEPS525_DISPLAYMODE_SET, 0xA0); + write_reg(par, SEPS525_RGBIF, 0x01); /* Set MCU Interface Mode */ + /* Set Memory Write Mode */ + write_reg(par, SEPS525_MEMORY_WRITEMODE, 0x66); + write_reg(par, SEPS525_DUTY, 0x7F); /* 1/128 Duty (0x0F~0x7F) */ + /* Set Mapping RAM Display Start Line (0x00~0x7F) */ + write_reg(par, SEPS525_DSL, 0x00); + write_reg(par, SEPS525_DISP_ONOFF, 0x01); /* Display On (0x00/0x01) */ + /* Set All Internal Register Value as Normal Mode */ + write_reg(par, SEPS525_SOFT_RST, 0x00); + /* Set RGB Interface Polarity as Active Low */ + write_reg(par, SEPS525_RGB_POL, 0x00); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + if (seps525_use_window) { + /* Set Window Xs,Ys Xe,Ye*/ + write_reg(par, SEPS525_MX1_ADDR, xs); + write_reg(par, SEPS525_MX2_ADDR, xe); + write_reg(par, SEPS525_MY1_ADDR, ys); + write_reg(par, SEPS525_MY2_ADDR, ye); + } + /* start position X,Y */ + write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_X, xs); + write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_Y, ys); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); +} + +static int set_var(struct fbtft_par *par) +{ + u8 val; + + switch (par->info->var.rotate) { + case 0: + val = 0; + break; + case 180: + val = MODE_RD | MODE_CD; + break; + case 90: + case 270: + + default: + return -EINVAL; + } + /* Memory Access Control */ + write_reg(par, SEPS525_DISPLAYMODE_SET, val | + (par->bgr ? MODE_SWAP_BGR : 0)); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "syncoam,seps525", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:seps525"); +MODULE_ALIAS("platform:seps525"); + +MODULE_DESCRIPTION("FB driver for the SEPS525 LCD Controller"); +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c index 65681d0fe200..e763205e9e4f 100644 --- a/drivers/staging/fbtft/fb_uc1611.c +++ b/drivers/staging/fbtft/fb_uc1611.c @@ -91,7 +91,7 @@ static int init_display(struct fbtft_par *par) write_reg(par, 0x2C | (pump & 0x03)); /* Set inverse display */ - write_reg(par, 0xA6 | (0x01 & 0x01)); + write_reg(par, 0xA6 | 0x01); /* Set 4-bit grayscale mode */ write_reg(par, 0xD0 | (0x02 & 0x03)); @@ -157,8 +157,8 @@ static int set_var(struct fbtft_par *par) /* Set RAM address control */ write_reg(par, 0x88 | (0x0 & 0x1) << 2 /* Increment positively */ - | (0x1 & 0x1) << 1 /* Increment page first */ - | (0x1 & 0x1)); /* Wrap around (default) */ + | (0x1 << 1) /* Increment page first */ + | 0x1); /* Wrap around (default) */ /* Set LCD mapping */ write_reg(par, 0xC0 @@ -171,11 +171,11 @@ static int set_var(struct fbtft_par *par) write_reg(par, 0x88 | (0x0 & 0x1) << 2 /* Increment positively */ | (0x0 & 0x1) << 1 /* Increment column first */ - | (0x1 & 0x1)); /* Wrap around (default) */ + | 0x1); /* Wrap around (default) */ /* Set LCD mapping */ write_reg(par, 0xC0 - | (0x1 & 0x1) << 2 /* Mirror Y ON */ + | (0x1 << 2) /* Mirror Y ON */ | (0x0 & 0x1) << 1 /* Mirror X OFF */ | (0x0 & 0x1)); /* MS nibble last (default) */ break; @@ -183,13 +183,13 @@ static int set_var(struct fbtft_par *par) /* Set RAM address control */ write_reg(par, 0x88 | (0x0 & 0x1) << 2 /* Increment positively */ - | (0x1 & 0x1) << 1 /* Increment page first */ - | (0x1 & 0x1)); /* Wrap around (default) */ + | (0x1 << 1) /* Increment page first */ + | 0x1); /* Wrap around (default) */ /* Set LCD mapping */ write_reg(par, 0xC0 - | (0x1 & 0x1) << 2 /* Mirror Y ON */ - | (0x1 & 0x1) << 1 /* Mirror X ON */ + | (0x1 << 2) /* Mirror Y ON */ + | (0x1 << 1) /* Mirror X ON */ | (0x0 & 0x1)); /* MS nibble last (default) */ break; default: @@ -197,12 +197,12 @@ static int set_var(struct fbtft_par *par) write_reg(par, 0x88 | (0x0 & 0x1) << 2 /* Increment positively */ | (0x0 & 0x1) << 1 /* Increment column first */ - | (0x1 & 0x1)); /* Wrap around (default) */ + | 0x1); /* Wrap around (default) */ /* Set LCD mapping */ write_reg(par, 0xC0 | (0x0 & 0x1) << 2 /* Mirror Y OFF */ - | (0x1 & 0x1) << 1 /* Mirror X ON */ + | (0x1 << 1) /* Mirror X ON */ | (0x0 & 0x1)); /* MS nibble last (default) */ break; } diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index a0a67aa517f0..ffb84987dd86 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -22,8 +22,9 @@ #include <linux/uaccess.h> #include <linux/backlight.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/spinlock.h> -#include <linux/of.h> + #include <video/mipi_display.h> #include "fbtft.h" @@ -70,7 +71,6 @@ void fbtft_dbg_hex(const struct device *dev, int groupsize, } EXPORT_SYMBOL(fbtft_dbg_hex); -#ifdef CONFIG_OF static int fbtft_request_one_gpio(struct fbtft_par *par, const char *name, int index, struct gpio_desc **gpiop) @@ -92,14 +92,11 @@ static int fbtft_request_one_gpio(struct fbtft_par *par, return ret; } -static int fbtft_request_gpios_dt(struct fbtft_par *par) +static int fbtft_request_gpios(struct fbtft_par *par) { int i; int ret; - if (!par->info->device->of_node) - return -EINVAL; - ret = fbtft_request_one_gpio(par, "reset", 0, &par->gpio.reset); if (ret) return ret; @@ -135,7 +132,6 @@ static int fbtft_request_gpios_dt(struct fbtft_par *par) return 0; } -#endif #ifdef CONFIG_FB_BACKLIGHT static int fbtft_backlight_update_status(struct backlight_device *bd) @@ -317,7 +313,7 @@ static void fbtft_mkdirty(struct fb_info *info, int y, int height) /* special case, needed ? */ if (y == -1) { y = 0; - height = info->var.yres - 1; + height = info->var.yres; } /* Mark display lines/area as dirty */ @@ -529,6 +525,7 @@ static void fbtft_merge_fbtftops(struct fbtft_ops *dst, struct fbtft_ops *src) * * @display: pointer to structure describing the display * @dev: pointer to the device for this fb, this can be NULL + * @pdata: platform data for the display in use * * Creates a new frame buffer info structure. * @@ -666,7 +663,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, fbdefio->deferred_io = fbtft_deferred_io; fb_deferred_io_init(info); - strncpy(info->fix.id, dev->driver->name, 16); + snprintf(info->fix.id, sizeof(info->fix.id), "%s", dev->driver->name); info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = FB_VISUAL_TRUECOLOR; info->fix.xpanstep = 0; @@ -897,46 +894,54 @@ int fbtft_unregister_framebuffer(struct fb_info *fb_info) } EXPORT_SYMBOL(fbtft_unregister_framebuffer); -#ifdef CONFIG_OF /** - * fbtft_init_display_dt() - Device Tree init_display() function + * fbtft_init_display_from_property() - Device Tree init_display() function * @par: Driver data * * Return: 0 if successful, negative if error */ -static int fbtft_init_display_dt(struct fbtft_par *par) +static int fbtft_init_display_from_property(struct fbtft_par *par) { - struct device_node *node = par->info->device->of_node; - struct property *prop; - const __be32 *p; + struct device *dev = par->info->device; + int buf[64], count, index, i, j, ret; + u32 *values; u32 val; - int buf[64], i, j; - if (!node) + count = device_property_count_u32(dev, "init"); + if (count < 0) + return count; + if (count == 0) return -EINVAL; - prop = of_find_property(node, "init", NULL); - p = of_prop_next_u32(prop, NULL, &val); - if (!p) - return -EINVAL; + values = kmalloc_array(count, sizeof(*values), GFP_KERNEL); + if (!values) + return -ENOMEM; + + ret = device_property_read_u32_array(dev, "init", values, count); + if (ret) + goto out_free; par->fbtftops.reset(par); if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ - while (p) { + index = -1; + while (index < count) { + val = values[++index]; + if (val & FBTFT_OF_INIT_CMD) { val &= 0xFFFF; i = 0; - while (p && !(val & 0xFFFF0000)) { + while ((index < count) && !(val & 0xFFFF0000)) { if (i > 63) { - dev_err(par->info->device, + dev_err(dev, "%s: Maximum register values exceeded\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto out_free; } buf[i++] = val; - p = of_prop_next_u32(prop, p, &val); + val = values[++index]; } /* make debug message */ fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, @@ -966,17 +971,18 @@ static int fbtft_init_display_dt(struct fbtft_par *par) fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "init: msleep(%u)\n", val & 0xFFFF); msleep(val & 0xFFFF); - p = of_prop_next_u32(prop, p, &val); + val = values[++index]; } else { - dev_err(par->info->device, "illegal init value 0x%X\n", - val); - return -EINVAL; + dev_err(dev, "illegal init value 0x%X\n", val); + ret = -EINVAL; + goto out_free; } } - return 0; +out_free: + kfree(values); + return ret; } -#endif /** * fbtft_init_display() - Generic init_display() function @@ -1137,27 +1143,25 @@ static int fbtft_verify_gpios(struct fbtft_par *par) return 0; } -#ifdef CONFIG_OF /* returns 0 if the property is not present */ -static u32 fbtft_of_value(struct device_node *node, const char *propname) +static u32 fbtft_property_value(struct device *dev, const char *propname) { int ret; u32 val = 0; - ret = of_property_read_u32(node, propname, &val); + ret = device_property_read_u32(dev, propname, &val); if (ret == 0) - pr_info("%s: %s = %u\n", __func__, propname, val); + dev_info(dev, "%s: %s = %u\n", __func__, propname, val); return val; } -static struct fbtft_platform_data *fbtft_probe_dt(struct device *dev) +static struct fbtft_platform_data *fbtft_properties_read(struct device *dev) { - struct device_node *node = dev->of_node; struct fbtft_platform_data *pdata; - if (!node) { - dev_err(dev, "Missing platform data or DT\n"); + if (!dev_fwnode(dev)) { + dev_err(dev, "Missing platform data or properties\n"); return ERR_PTR(-EINVAL); } @@ -1165,35 +1169,28 @@ static struct fbtft_platform_data *fbtft_probe_dt(struct device *dev) if (!pdata) return ERR_PTR(-ENOMEM); - pdata->display.width = fbtft_of_value(node, "width"); - pdata->display.height = fbtft_of_value(node, "height"); - pdata->display.regwidth = fbtft_of_value(node, "regwidth"); - pdata->display.buswidth = fbtft_of_value(node, "buswidth"); - pdata->display.backlight = fbtft_of_value(node, "backlight"); - pdata->display.bpp = fbtft_of_value(node, "bpp"); - pdata->display.debug = fbtft_of_value(node, "debug"); - pdata->rotate = fbtft_of_value(node, "rotate"); - pdata->bgr = of_property_read_bool(node, "bgr"); - pdata->fps = fbtft_of_value(node, "fps"); - pdata->txbuflen = fbtft_of_value(node, "txbuflen"); - pdata->startbyte = fbtft_of_value(node, "startbyte"); - of_property_read_string(node, "gamma", (const char **)&pdata->gamma); - - if (of_find_property(node, "led-gpios", NULL)) + pdata->display.width = fbtft_property_value(dev, "width"); + pdata->display.height = fbtft_property_value(dev, "height"); + pdata->display.regwidth = fbtft_property_value(dev, "regwidth"); + pdata->display.buswidth = fbtft_property_value(dev, "buswidth"); + pdata->display.backlight = fbtft_property_value(dev, "backlight"); + pdata->display.bpp = fbtft_property_value(dev, "bpp"); + pdata->display.debug = fbtft_property_value(dev, "debug"); + pdata->rotate = fbtft_property_value(dev, "rotate"); + pdata->bgr = device_property_read_bool(dev, "bgr"); + pdata->fps = fbtft_property_value(dev, "fps"); + pdata->txbuflen = fbtft_property_value(dev, "txbuflen"); + pdata->startbyte = fbtft_property_value(dev, "startbyte"); + device_property_read_string(dev, "gamma", (const char **)&pdata->gamma); + + if (device_property_present(dev, "led-gpios")) pdata->display.backlight = 1; - if (of_find_property(node, "init", NULL)) - pdata->display.fbtftops.init_display = fbtft_init_display_dt; - pdata->display.fbtftops.request_gpios = fbtft_request_gpios_dt; + if (device_property_present(dev, "init")) + pdata->display.fbtftops.init_display = fbtft_init_display_from_property; + pdata->display.fbtftops.request_gpios = fbtft_request_gpios; return pdata; } -#else -static struct fbtft_platform_data *fbtft_probe_dt(struct device *dev) -{ - dev_err(dev, "Missing platform data\n"); - return ERR_PTR(-EINVAL); -} -#endif /** * fbtft_probe_common() - Generic device probe() helper function @@ -1227,7 +1224,7 @@ int fbtft_probe_common(struct fbtft_display *display, pdata = dev->platform_data; if (!pdata) { - pdata = fbtft_probe_dt(dev); + pdata = fbtft_properties_read(dev); if (IS_ERR(pdata)) return PTR_ERR(pdata); } diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h index 9b6bdb62093d..5f782da51959 100644 --- a/drivers/staging/fbtft/fbtft.h +++ b/drivers/staging/fbtft/fbtft.h @@ -309,7 +309,7 @@ MODULE_DEVICE_TABLE(of, dt_ids); \ static struct spi_driver fbtft_driver_spi_driver = { \ .driver = { \ .name = _name, \ - .of_match_table = of_match_ptr(dt_ids), \ + .of_match_table = dt_ids, \ }, \ .probe = fbtft_driver_probe_spi, \ .remove = fbtft_driver_remove_spi, \ @@ -319,7 +319,7 @@ static struct platform_driver fbtft_driver_platform_driver = { \ .driver = { \ .name = _name, \ .owner = THIS_MODULE, \ - .of_match_table = of_match_ptr(dt_ids), \ + .of_match_table = dt_ids, \ }, \ .probe = fbtft_driver_probe_pdev, \ .remove = fbtft_driver_remove_pdev, \ |