diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250_bcm7271.c | 14 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dma.c | 23 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_exar.c | 5 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 47 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci1xxxx.c | 50 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 22 |
8 files changed, 92 insertions, 74 deletions
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 5daa38d9c64e..de270863eb5e 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -413,20 +413,18 @@ static int stop_tx_dma(struct uart_8250_port *p) static int brcmuart_tx_dma(struct uart_8250_port *p) { struct brcmuart_priv *priv = p->port.private_data; - struct circ_buf *xmit = &p->port.state->xmit; + struct tty_port *tport = &p->port.state->port; u32 tx_size; if (uart_tx_stopped(&p->port) || priv->tx_running || - uart_circ_empty(xmit)) { + kfifo_is_empty(&tport->xmit_fifo)) { return 0; } - tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); priv->dma.tx_err = 0; - memcpy(priv->tx_buf, &xmit->buf[xmit->tail], tx_size); - uart_xmit_advance(&p->port, tx_size); + tx_size = uart_fifo_out(&p->port, priv->tx_buf, UART_XMIT_SIZE); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(&p->port); udma_writel(priv, REGS_DMA_TX, UDMA_TX_TRANSFER_LEN, tx_size); @@ -540,7 +538,7 @@ static void brcmuart_tx_isr(struct uart_port *up, u32 isr) struct brcmuart_priv *priv = up->private_data; struct device *dev = up->dev; struct uart_8250_port *port_8250 = up_to_u8250p(up); - struct circ_buf *xmit = &port_8250->port.state->xmit; + struct tty_port *tport = &port_8250->port.state->port; if (isr & UDMA_INTR_TX_ABORT) { if (priv->tx_running) @@ -548,7 +546,7 @@ static void brcmuart_tx_isr(struct uart_port *up, u32 isr) return; } priv->tx_running = false; - if (!uart_circ_empty(xmit) && !uart_tx_stopped(up)) + if (!kfifo_is_empty(&tport->xmit_fifo) && !uart_tx_stopped(up)) brcmuart_tx_dma(port_8250); } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index b62ad9006780..3a1936b7f05f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -280,7 +280,8 @@ static void serial8250_backup_timeout(struct timer_list *t) */ lsr = serial_lsr_in(up); if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && - (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && + (!kfifo_is_empty(&up->port.state->port.xmit_fifo) || + up->port.x_char) && (lsr & UART_LSR_THRE)) { iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); iir |= UART_IIR_THRI; diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index 8b2c3f478b17..8a353e3cc3dd 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -15,7 +15,7 @@ static void __dma_tx_complete(void *param) { struct uart_8250_port *p = param; struct uart_8250_dma *dma = p->dma; - struct circ_buf *xmit = &p->port.state->xmit; + struct tty_port *tport = &p->port.state->port; unsigned long flags; int ret; @@ -28,7 +28,7 @@ static void __dma_tx_complete(void *param) uart_xmit_advance(&p->port, dma->tx_size); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(&p->port); ret = serial8250_tx_dma(p); @@ -86,7 +86,7 @@ static void dma_rx_complete(void *param) int serial8250_tx_dma(struct uart_8250_port *p) { struct uart_8250_dma *dma = p->dma; - struct circ_buf *xmit = &p->port.state->xmit; + struct tty_port *tport = &p->port.state->port; struct dma_async_tx_descriptor *desc; struct uart_port *up = &p->port; struct scatterlist sg; @@ -103,18 +103,23 @@ int serial8250_tx_dma(struct uart_8250_port *p) uart_xchar_out(up, UART_TX); } - if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { + if (uart_tx_stopped(&p->port) || kfifo_is_empty(&tport->xmit_fifo)) { /* We have been called from __dma_tx_complete() */ return 0; } - dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - serial8250_do_prepare_tx_dma(p); sg_init_table(&sg, 1); - sg_dma_address(&sg) = dma->tx_addr + xmit->tail; - sg_dma_len(&sg) = dma->tx_size; + /* kfifo can do more than one sg, we don't (quite yet) */ + ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, + UART_XMIT_SIZE, dma->tx_addr); + + /* we already checked empty fifo above, so there should be something */ + if (WARN_ON_ONCE(ret != 1)) + return 0; + + dma->tx_size = sg_dma_len(&sg); desc = dmaengine_prep_slave_sg(dma->txchan, &sg, 1, DMA_MEM_TO_DEV, @@ -257,7 +262,7 @@ int serial8250_request_dma(struct uart_8250_port *p) /* TX buffer */ dma->tx_addr = dma_map_single(dma->txchan->device->dev, - p->port.state->xmit.buf, + p->port.state->port.xmit_buf, UART_XMIT_SIZE, DMA_TO_DEVICE); if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) { diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 0440df7de1ed..f89dabfc0f97 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -214,7 +214,7 @@ static void exar_shutdown(struct uart_port *port) { bool tx_complete = false; struct uart_8250_port *up = up_to_u8250p(port); - struct circ_buf *xmit = &port->state->xmit; + struct tty_port *tport = &port->state->port; int i = 0; u16 lsr; @@ -225,7 +225,8 @@ static void exar_shutdown(struct uart_port *port) else tx_complete = false; usleep_range(1000, 1100); - } while (!uart_circ_empty(xmit) && !tx_complete && i++ < 1000); + } while (!kfifo_is_empty(&tport->xmit_fifo) && + !tx_complete && i++ < 1000); serial8250_do_shutdown(port); } diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 9ff6bbe9c086..c365a349421a 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -199,7 +199,7 @@ static int mtk8250_startup(struct uart_port *port) if (up->dma) { data->rx_status = DMA_RX_START; - uart_circ_clear(&port->state->xmit); + kfifo_reset(&port->state->port.xmit_fifo); } #endif memset(&port->icount, 0, sizeof(port->icount)); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 879e77b30701..c07d924d5add 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1094,7 +1094,7 @@ static void omap_8250_dma_tx_complete(void *param) { struct uart_8250_port *p = param; struct uart_8250_dma *dma = p->dma; - struct circ_buf *xmit = &p->port.state->xmit; + struct tty_port *tport = &p->port.state->port; unsigned long flags; bool en_thri = false; struct omap8250_priv *priv = p->port.private_data; @@ -1113,10 +1113,10 @@ static void omap_8250_dma_tx_complete(void *param) omap8250_restore_regs(p); } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(&p->port); - if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) { + if (!kfifo_is_empty(&tport->xmit_fifo) && !uart_tx_stopped(&p->port)) { int ret; ret = omap_8250_tx_dma(p); @@ -1138,15 +1138,15 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) { struct uart_8250_dma *dma = p->dma; struct omap8250_priv *priv = p->port.private_data; - struct circ_buf *xmit = &p->port.state->xmit; + struct tty_port *tport = &p->port.state->port; struct dma_async_tx_descriptor *desc; struct scatterlist sg; - unsigned int skip_byte = 0; + int skip_byte = -1; int ret; if (dma->tx_running) return 0; - if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { + if (uart_tx_stopped(&p->port) || kfifo_is_empty(&tport->xmit_fifo)) { /* * Even if no data, we need to return an error for the two cases @@ -1161,8 +1161,18 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) return 0; } - dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + sg_init_table(&sg, 1); + ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, + UART_XMIT_SIZE, dma->tx_addr); + if (ret != 1) { + serial8250_clear_THRI(p); + return 0; + } + + dma->tx_size = sg_dma_len(&sg); + if (priv->habit & OMAP_DMA_TX_KICK) { + unsigned char c; u8 tx_lvl; /* @@ -1189,13 +1199,16 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) ret = -EINVAL; goto err; } - skip_byte = 1; + if (!kfifo_get(&tport->xmit_fifo, &c)) { + ret = -EINVAL; + goto err; + } + skip_byte = c; + /* now we need to recompute due to kfifo_get */ + kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, + UART_XMIT_SIZE, dma->tx_addr); } - sg_init_table(&sg, 1); - sg_dma_address(&sg) = dma->tx_addr + xmit->tail + skip_byte; - sg_dma_len(&sg) = dma->tx_size - skip_byte; - desc = dmaengine_prep_slave_sg(dma->txchan, &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { @@ -1218,11 +1231,13 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) dma->tx_err = 0; serial8250_clear_THRI(p); - if (skip_byte) - serial_out(p, UART_TX, xmit->buf[xmit->tail]); - return 0; + ret = 0; + goto out_skip; err: dma->tx_err = 1; +out_skip: + if (skip_byte >= 0) + serial_out(p, UART_TX, skip_byte); return ret; } @@ -1311,7 +1326,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port) serial8250_modem_status(up); if (status & UART_LSR_THRE && up->dma->tx_err) { if (uart_tx_stopped(&up->port) || - uart_circ_empty(&up->port.state->xmit)) { + kfifo_is_empty(&up->port.state->port.xmit_fifo)) { up->dma->tx_err = 0; serial8250_tx_chars(up); } else { diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c index 2fbb5851f788..d3930bf32fe4 100644 --- a/drivers/tty/serial/8250/8250_pci1xxxx.c +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -382,10 +382,10 @@ static void pci1xxxx_rx_burst(struct uart_port *port, u32 uart_status) } static void pci1xxxx_process_write_data(struct uart_port *port, - struct circ_buf *xmit, int *data_empty_count, u32 *valid_byte_count) { + struct tty_port *tport = &port->state->port; u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE; /* @@ -395,41 +395,36 @@ static void pci1xxxx_process_write_data(struct uart_port *port, * one byte at a time. */ while (valid_burst_count) { + u32 c; + if (*data_empty_count - UART_BURST_SIZE < 0) break; - if (xmit->tail > (UART_XMIT_SIZE - UART_BURST_SIZE)) + if (kfifo_len(&tport->xmit_fifo) < UART_BURST_SIZE) + break; + if (WARN_ON(kfifo_out(&tport->xmit_fifo, (u8 *)&c, sizeof(c)) != + sizeof(c))) break; - writel(*(unsigned int *)&xmit->buf[xmit->tail], - port->membase + UART_TX_BURST_FIFO); + writel(c, port->membase + UART_TX_BURST_FIFO); *valid_byte_count -= UART_BURST_SIZE; *data_empty_count -= UART_BURST_SIZE; valid_burst_count -= UART_BYTE_SIZE; - - xmit->tail = (xmit->tail + UART_BURST_SIZE) & - (UART_XMIT_SIZE - 1); } while (*valid_byte_count) { - if (*data_empty_count - UART_BYTE_SIZE < 0) + u8 c; + + if (!kfifo_get(&tport->xmit_fifo, &c)) break; - writeb(xmit->buf[xmit->tail], port->membase + - UART_TX_BYTE_FIFO); + writeb(c, port->membase + UART_TX_BYTE_FIFO); *data_empty_count -= UART_BYTE_SIZE; *valid_byte_count -= UART_BYTE_SIZE; /* - * When the tail of the circular buffer is reached, the next - * byte is transferred to the beginning of the buffer. - */ - xmit->tail = (xmit->tail + UART_BYTE_SIZE) & - (UART_XMIT_SIZE - 1); - - /* * If there are any pending burst count, data is handled by * transmitting DWORDs at a time. */ - if (valid_burst_count && (xmit->tail < - (UART_XMIT_SIZE - UART_BURST_SIZE))) + if (valid_burst_count && + kfifo_len(&tport->xmit_fifo) >= UART_BURST_SIZE) break; } } @@ -437,11 +432,9 @@ static void pci1xxxx_process_write_data(struct uart_port *port, static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status) { struct uart_8250_port *up = up_to_u8250p(port); + struct tty_port *tport = &port->state->port; u32 valid_byte_count; int data_empty_count; - struct circ_buf *xmit; - - xmit = &port->state->xmit; if (port->x_char) { writeb(port->x_char, port->membase + UART_TX); @@ -450,25 +443,25 @@ static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status) return; } - if ((uart_tx_stopped(port)) || (uart_circ_empty(xmit))) { + if ((uart_tx_stopped(port)) || kfifo_is_empty(&tport->xmit_fifo)) { port->ops->stop_tx(port); } else { data_empty_count = (pci1xxxx_read_burst_status(port) & UART_BST_STAT_TX_COUNT_MASK) >> 8; do { - valid_byte_count = uart_circ_chars_pending(xmit); + valid_byte_count = kfifo_len(&tport->xmit_fifo); - pci1xxxx_process_write_data(port, xmit, + pci1xxxx_process_write_data(port, &data_empty_count, &valid_byte_count); port->icount.tx++; - if (uart_circ_empty(xmit)) + if (kfifo_is_empty(&tport->xmit_fifo)) break; } while (data_empty_count && valid_byte_count); } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(port); /* @@ -476,7 +469,8 @@ static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status) * the HW can go idle. So we get here once again with empty FIFO and * disable the interrupt and RPM in __stop_tx() */ - if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM)) + if (kfifo_is_empty(&tport->xmit_fifo) && + !(up->capabilities & UART_CAP_RPM)) port->ops->stop_tx(port); } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fc9dd5d45295..0c19451d0332 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1630,7 +1630,7 @@ static void serial8250_start_tx(struct uart_port *port) /* Port locked to synchronize UART_IER access against the console. */ lockdep_assert_held_once(&port->lock); - if (!port->x_char && uart_circ_empty(&port->state->xmit)) + if (!port->x_char && kfifo_is_empty(&port->state->port.xmit_fifo)) return; serial8250_rpm_get_tx(up); @@ -1778,7 +1778,7 @@ EXPORT_SYMBOL_GPL(serial8250_rx_chars); void serial8250_tx_chars(struct uart_8250_port *up) { struct uart_port *port = &up->port; - struct circ_buf *xmit = &port->state->xmit; + struct tty_port *tport = &port->state->port; int count; if (port->x_char) { @@ -1789,14 +1789,19 @@ void serial8250_tx_chars(struct uart_8250_port *up) serial8250_stop_tx(port); return; } - if (uart_circ_empty(xmit)) { + if (kfifo_is_empty(&tport->xmit_fifo)) { __stop_tx(up); return; } count = up->tx_loadsz; do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); + unsigned char c; + + if (!uart_fifo_get(port, &c)) + break; + + serial_out(up, UART_TX, c); if (up->bugs & UART_BUG_TXRACE) { /* * The Aspeed BMC virtual UARTs have a bug where data @@ -1809,9 +1814,7 @@ void serial8250_tx_chars(struct uart_8250_port *up) */ serial_in(up, UART_SCR); } - uart_xmit_advance(port, 1); - if (uart_circ_empty(xmit)) - break; + if ((up->capabilities & UART_CAP_HFIFO) && !uart_lsr_tx_empty(serial_in(up, UART_LSR))) break; @@ -1821,7 +1824,7 @@ void serial8250_tx_chars(struct uart_8250_port *up) break; } while (--count > 0); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(port); /* @@ -1829,7 +1832,8 @@ void serial8250_tx_chars(struct uart_8250_port *up) * HW can go idle. So we get here once again with empty FIFO and disable * the interrupt and RPM in __stop_tx() */ - if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM)) + if (kfifo_is_empty(&tport->xmit_fifo) && + !(up->capabilities & UART_CAP_RPM)) __stop_tx(up); } EXPORT_SYMBOL_GPL(serial8250_tx_chars); |