11 files changed, 303 insertions, 17 deletions

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index c26a82e83f6e..10e008a730a5 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -323,7 +323,9 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	int retval;
 	struct fsl_usb2_platform_data *pdata;
+	struct device *dev;
 
+	dev = hcd->self.controller;
 	pdata = hcd->self.controller->platform_data;
 	ehci->big_endian_desc = pdata->big_endian_desc;
 	ehci->big_endian_mmio = pdata->big_endian_mmio;
@@ -353,6 +355,16 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
 
 	ehci_reset(ehci);
 
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		/*
+		 * set SBUSCFG:AHBBRST so that control msgs don't
+		 * fail when doing heavy PATA writes.
+		 */
+		ehci_writel(ehci, SBUSCFG_INCR8,
+			    hcd->regs + FSL_SOC_USB_SBUSCFG);
+	}
+
 	retval = ehci_fsl_reinit(ehci);
 	return retval;
 }
@@ -476,6 +488,8 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
 	ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
 		    hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
 
+	ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
+
 	/* restore EHCI registers */
 	ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
 	ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index bdf43e2adc51..6d5a94e9bb3c 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -19,6 +19,8 @@
 #define _EHCI_FSL_H
 
 /* offsets for the non-ehci registers in the FSL SOC USB controller */
+#define FSL_SOC_USB_SBUSCFG	0x90
+#define SBUSCFG_INCR8		0x02	/* INCR8, specified */
 #define FSL_SOC_USB_ULPIVP	0x170
 #define FSL_SOC_USB_PORTSC1	0x184
 #define PORT_PTS_MSK		(3<<30)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a007a9fe0f87..4918b0c59af9 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1376,6 +1376,11 @@ MODULE_LICENSE ("GPL");
 #define        PLATFORM_DRIVER         ehci_mv_driver
 #endif
 
+#ifdef CONFIG_MACH_LOONGSON1
+#include "ehci-ls1x.c"
+#define PLATFORM_DRIVER		ehci_ls1x_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 77bbb2357e47..01011dd0cb5d 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 	ehci->owned_ports = 0;
 }
 
-static int ehci_port_change(struct ehci_hcd *ehci)
+static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci)
 {
 	int i = HCS_N_PORTS(ehci->hcs_params);
 
@@ -1076,7 +1076,8 @@ error_exit:
 	return retval;
 }
 
-static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
+static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd,
+		int portnum)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 
@@ -1085,7 +1086,8 @@ static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
 	set_owner(ehci, --portnum, PORT_OWNER);
 }
 
-static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd,
+		int portnum)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	u32 __iomem		*reg;
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
new file mode 100644
index 000000000000..a283e59709d6
--- /dev/null
+++ b/drivers/usb/host/ehci-ls1x.c
@@ -0,0 +1,159 @@
+/*
+ *  Bus Glue for Loongson LS1X built-in EHCI controller.
+ *
+ *  Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+
+#include <linux/platform_device.h>
+
+static int ehci_ls1x_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	ehci->caps = hcd->regs;
+
+	ret = ehci_setup(hcd);
+	if (ret)
+		return ret;
+
+	ehci_port_power(ehci, 0);
+
+	return 0;
+}
+
+static const struct hc_driver ehci_ls1x_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "LOONGSON1 EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_ls1x_reset,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	pr_debug("initializing loongson1 ehci USB Controller\n");
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev,
+				dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+	hcd->rsrc_start	= res->start;
+	hcd->rsrc_len	= resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		ret = -EBUSY;
+		goto err_put_hcd;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		ret = -EFAULT;
+		goto err_release_region;
+	}
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (ret)
+		goto err_iounmap;
+
+	return ret;
+
+err_iounmap:
+	iounmap(hcd->regs);
+err_release_region:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_put_hcd:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int ehci_hcd_ls1x_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static struct platform_driver ehci_ls1x_driver = {
+	.probe = ehci_hcd_ls1x_probe,
+	.remove = ehci_hcd_ls1x_remove,
+	.shutdown = usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "ls1x-ehci",
+		.owner	= THIS_MODULE,
+	},
+};
+
+MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci");
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 6d7533427163..ec98ecee3517 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -239,7 +239,7 @@ static int debug_status_show(struct seq_file *s, void *v)
 		"ETDs allocated: %d/%d (max=%d)\n"
 		"ETDs in use sw: %d\n"
 		"ETDs in use hw: %d\n"
-		"DMEM alocated: %d/%d (max=%d)\n"
+		"DMEM allocated: %d/%d (max=%d)\n"
 		"DMEM blocks: %d\n"
 		"Queued waiting for ETD: %d\n"
 		"Queued waiting for DMEM: %d\n",
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 6b5eb1017e2c..e37dea87bb56 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -565,6 +565,9 @@ static int uhci_start(struct usb_hcd *hcd)
 	struct dentry __maybe_unused *dentry;
 
 	hcd->uses_new_polling = 1;
+	/* Accept arbitrarily long scatter-gather lists */
+	if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+		hcd->self.sg_tablesize = ~0;
 
 	spin_lock_init(&uhci->lock);
 	setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout,
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 557b6f32db86..673ad120c43e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -422,6 +422,32 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 	xhci_writel(xhci, temp, port_array[port_id]);
 }
 
+void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
+		__le32 __iomem **port_array, int port_id, u16 wake_mask)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, port_array[port_id]);
+	temp = xhci_port_state_to_neutral(temp);
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
+		temp |= PORT_WKCONN_E;
+	else
+		temp &= ~PORT_WKCONN_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
+		temp |= PORT_WKDISC_E;
+	else
+		temp &= ~PORT_WKDISC_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
+		temp |= PORT_WKOC_E;
+	else
+		temp &= ~PORT_WKOC_E;
+
+	xhci_writel(xhci, temp, port_array[port_id]);
+}
+
 /* Test and clear port RWC bit */
 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 				int port_id, u32 port_bit)
@@ -448,6 +474,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	int slot_id;
 	struct xhci_bus_state *bus_state;
 	u16 link_state = 0;
+	u16 wake_mask = 0;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -593,6 +620,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	case SetPortFeature:
 		if (wValue == USB_PORT_FEAT_LINK_STATE)
 			link_state = (wIndex & 0xff00) >> 3;
+		if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
+			wake_mask = wIndex & 0xff00;
 		wIndex &= 0xff;
 		if (!wIndex || wIndex > max_ports)
 			goto error;
@@ -703,6 +732,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 			break;
+		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
+			xhci_set_remote_wake_mask(xhci, port_array,
+					wIndex, wake_mask);
+			temp = xhci_readl(xhci, port_array[wIndex]);
+			xhci_dbg(xhci, "set port remote wake mask, "
+					"actual port %d status  = 0x%x\n",
+					wIndex, temp);
+			break;
 		case USB_PORT_FEAT_BH_PORT_RESET:
 			temp |= PORT_WR;
 			xhci_writel(xhci, temp, port_array[wIndex]);
@@ -883,6 +920,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
 		}
+		/* USB core sets remote wake mask for USB 3.0 hubs,
+		 * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND
+		 * is enabled, so also enable remote wake here.
+		 */
 		if (hcd->self.root_hub->do_remote_wakeup) {
 			if (t1 & PORT_CONNECT) {
 				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 383fc857491c..8339d826ce58 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2157,7 +2157,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	unsigned int	val, val2;
 	u64		val_64;
 	struct xhci_segment	*seg;
-	u32 page_size;
+	u32 page_size, temp;
 	int i;
 
 	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
@@ -2340,6 +2340,15 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
 
+	/* Enable USB 3.0 device notifications for function remote wake, which
+	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
+	 * U3 (device suspend).
+	 */
+	temp = xhci_readl(xhci, &xhci->op_regs->dev_notification);
+	temp &= ~DEV_NOTE_MASK;
+	temp |= DEV_NOTE_FWAKE;
+	xhci_writel(xhci, temp, &xhci->op_regs->dev_notification);
+
 	return 0;
 
 fail:
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b62037bff688..3a033240ec64 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1237,6 +1237,26 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 	return num_similar_speed_ports;
 }
 
+static void handle_device_notification(struct xhci_hcd *xhci,
+		union xhci_trb *event)
+{
+	u32 slot_id;
+	struct usb_device *udev;
+
+	slot_id = TRB_TO_SLOT_ID(event->generic.field[3]);
+	if (!xhci->devs[slot_id]) {
+		xhci_warn(xhci, "Device Notification event for "
+				"unused slot %u\n", slot_id);
+		return;
+	}
+
+	xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
+			slot_id);
+	udev = xhci->devs[slot_id]->udev;
+	if (udev && udev->parent)
+		usb_wakeup_notification(udev->parent, udev->portnum);
+}
+
 static void handle_port_status(struct xhci_hcd *xhci,
 		union xhci_trb *event)
 {
@@ -1321,20 +1341,21 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		}
 
 		if (DEV_SUPERSPEED(temp)) {
-			xhci_dbg(xhci, "resume SS port %d\n", port_id);
+			xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
+			/* Set a flag to say the port signaled remote wakeup,
+			 * so we can tell the difference between the end of
+			 * device and host initiated resume.
+			 */
+			bus_state->port_remote_wakeup |= 1 << faked_port_index;
+			xhci_test_and_clear_bit(xhci, port_array,
+					faked_port_index, PORT_PLC);
 			xhci_set_link_state(xhci, port_array, faked_port_index,
 						XDEV_U0);
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					faked_port_index + 1);
-			if (!slot_id) {
-				xhci_dbg(xhci, "slot_id is zero\n");
-				goto cleanup;
-			}
-			xhci_ring_device(xhci, slot_id);
-			xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
-			/* Clear PORT_PLC */
-			xhci_test_and_clear_bit(xhci, port_array,
-						faked_port_index, PORT_PLC);
+			/* Need to wait until the next link state change
+			 * indicates the device is actually in U0.
+			 */
+			bogus_port_status = true;
+			goto cleanup;
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
@@ -1345,6 +1366,32 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		}
 	}
 
+	if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&
+			DEV_SUPERSPEED(temp)) {
+		xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
+		/* We've just brought the device into U0 through either the
+		 * Resume state after a device remote wakeup, or through the
+		 * U3Exit state after a host-initiated resume.  If it's a device
+		 * initiated remote wake, don't pass up the link state change,
+		 * so the roothub behavior is consistent with external
+		 * USB 3.0 hub behavior.
+		 */
+		slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+				faked_port_index + 1);
+		if (slot_id && xhci->devs[slot_id])
+			xhci_ring_device(xhci, slot_id);
+		if (bus_state->port_remote_wakeup && (1 << faked_port_index)) {
+			bus_state->port_remote_wakeup &=
+				~(1 << faked_port_index);
+			xhci_test_and_clear_bit(xhci, port_array,
+					faked_port_index, PORT_PLC);
+			usb_wakeup_notification(hcd->self.root_hub,
+					faked_port_index + 1);
+			bogus_port_status = true;
+			goto cleanup;
+		}
+	}
+
 	if (hcd->speed != HCD_USB3)
 		xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
 					PORT_PLC);
@@ -2277,6 +2324,9 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
 		else
 			update_ptrs = 0;
 		break;
+	case TRB_TYPE(TRB_DEV_NOTE):
+		handle_device_notification(xhci, event);
+		break;
 	default:
 		if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >=
 		    TRB_TYPE(48))
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index fb99c8379142..0f4936956103 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1344,6 +1344,7 @@ struct xhci_bus_state {
 	/* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
 	u32			port_c_suspend;
 	u32			suspended_ports;
+	u32			port_remote_wakeup;
 	unsigned long		resume_done[USB_MAXCHILDREN];
 };