diff options
Diffstat (limited to 'drivers/video/fbdev/vermilion')
-rw-r--r-- | drivers/video/fbdev/vermilion/Makefile | 6 | ||||
-rw-r--r-- | drivers/video/fbdev/vermilion/cr_pll.c | 195 | ||||
-rw-r--r-- | drivers/video/fbdev/vermilion/vermilion.c | 1173 | ||||
-rw-r--r-- | drivers/video/fbdev/vermilion/vermilion.h | 245 |
4 files changed, 0 insertions, 1619 deletions
diff --git a/drivers/video/fbdev/vermilion/Makefile b/drivers/video/fbdev/vermilion/Makefile deleted file mode 100644 index 22e9e4635a00..000000000000 --- a/drivers/video/fbdev/vermilion/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_FB_LE80578) += vmlfb.o -obj-$(CONFIG_FB_CARILLO_RANCH) += crvml.o - -vmlfb-objs := vermilion.o -crvml-objs := cr_pll.o diff --git a/drivers/video/fbdev/vermilion/cr_pll.c b/drivers/video/fbdev/vermilion/cr_pll.c deleted file mode 100644 index 79d42b23d850..000000000000 --- a/drivers/video/fbdev/vermilion/cr_pll.c +++ /dev/null @@ -1,195 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) Intel Corp. 2007. - * All Rights Reserved. - * - * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to - * develop this driver. - * - * This file is part of the Carillo Ranch video subsystem driver. - * - * Authors: - * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com> - * Alan Hourihane <alanh-at-tungstengraphics-dot-com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/fb.h> -#include "vermilion.h" - -/* The PLL Clock register sits on Host bridge */ -#define CRVML_DEVICE_MCH 0x5001 -#define CRVML_REG_MCHBAR 0x44 -#define CRVML_REG_MCHEN 0x54 -#define CRVML_MCHEN_BIT (1 << 28) -#define CRVML_MCHMAP_SIZE 4096 -#define CRVML_REG_CLOCK 0xc3c -#define CRVML_CLOCK_SHIFT 8 -#define CRVML_CLOCK_MASK 0x00000f00 - -static struct pci_dev *mch_dev; -static u32 mch_bar; -static void __iomem *mch_regs_base; -static u32 saved_clock; - -static const unsigned crvml_clocks[] = { - 6750, - 13500, - 27000, - 29700, - 37125, - 54000, - 59400, - 74250, - 120000 - /* - * There are more clocks, but they are disabled on the CR board. - */ -}; - -static const u32 crvml_clock_bits[] = { - 0x0a, - 0x09, - 0x08, - 0x07, - 0x06, - 0x05, - 0x04, - 0x03, - 0x0b -}; - -static const unsigned crvml_num_clocks = ARRAY_SIZE(crvml_clocks); - -static int crvml_sys_restore(struct vml_sys *sys) -{ - void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK; - - iowrite32(saved_clock, clock_reg); - ioread32(clock_reg); - - return 0; -} - -static int crvml_sys_save(struct vml_sys *sys) -{ - void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK; - - saved_clock = ioread32(clock_reg); - - return 0; -} - -static int crvml_nearest_index(const struct vml_sys *sys, int clock) -{ - int i; - int cur_index = 0; - int cur_diff; - int diff; - - cur_diff = clock - crvml_clocks[0]; - cur_diff = (cur_diff < 0) ? -cur_diff : cur_diff; - for (i = 1; i < crvml_num_clocks; ++i) { - diff = clock - crvml_clocks[i]; - diff = (diff < 0) ? -diff : diff; - if (diff < cur_diff) { - cur_index = i; - cur_diff = diff; - } - } - return cur_index; -} - -static int crvml_nearest_clock(const struct vml_sys *sys, int clock) -{ - return crvml_clocks[crvml_nearest_index(sys, clock)]; -} - -static int crvml_set_clock(struct vml_sys *sys, int clock) -{ - void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK; - int index; - u32 clock_val; - - index = crvml_nearest_index(sys, clock); - - if (crvml_clocks[index] != clock) - return -EINVAL; - - clock_val = ioread32(clock_reg) & ~CRVML_CLOCK_MASK; - clock_val = crvml_clock_bits[index] << CRVML_CLOCK_SHIFT; - iowrite32(clock_val, clock_reg); - ioread32(clock_reg); - - return 0; -} - -static struct vml_sys cr_pll_ops = { - .name = "Carillo Ranch", - .save = crvml_sys_save, - .restore = crvml_sys_restore, - .set_clock = crvml_set_clock, - .nearest_clock = crvml_nearest_clock, -}; - -static int __init cr_pll_init(void) -{ - int err; - u32 dev_en; - - mch_dev = pci_get_device(PCI_VENDOR_ID_INTEL, - CRVML_DEVICE_MCH, NULL); - if (!mch_dev) { - printk(KERN_ERR - "Could not find Carillo Ranch MCH device.\n"); - return -ENODEV; - } - - pci_read_config_dword(mch_dev, CRVML_REG_MCHEN, &dev_en); - if (!(dev_en & CRVML_MCHEN_BIT)) { - printk(KERN_ERR - "Carillo Ranch MCH device was not enabled.\n"); - pci_dev_put(mch_dev); - return -ENODEV; - } - - pci_read_config_dword(mch_dev, CRVML_REG_MCHBAR, - &mch_bar); - mch_regs_base = - ioremap(mch_bar, CRVML_MCHMAP_SIZE); - if (!mch_regs_base) { - printk(KERN_ERR - "Carillo Ranch MCH device was not enabled.\n"); - pci_dev_put(mch_dev); - return -ENODEV; - } - - err = vmlfb_register_subsys(&cr_pll_ops); - if (err) { - printk(KERN_ERR - "Carillo Ranch failed to initialize vml_sys.\n"); - iounmap(mch_regs_base); - pci_dev_put(mch_dev); - return err; - } - - return 0; -} - -static void __exit cr_pll_exit(void) -{ - vmlfb_unregister_subsys(&cr_pll_ops); - - iounmap(mch_regs_base); - pci_dev_put(mch_dev); -} - -module_init(cr_pll_init); -module_exit(cr_pll_exit); - -MODULE_AUTHOR("Tungsten Graphics Inc."); -MODULE_DESCRIPTION("Carillo Ranch PLL Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c deleted file mode 100644 index a32e5b2924c9..000000000000 --- a/drivers/video/fbdev/vermilion/vermilion.c +++ /dev/null @@ -1,1173 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) Intel Corp. 2007. - * All Rights Reserved. - * - * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to - * develop this driver. - * - * This file is part of the Vermilion Range fb driver. - * - * Authors: - * Thomas Hellström <thomas-at-tungstengraphics-dot-com> - * Michel Dänzer <michel-at-tungstengraphics-dot-com> - * Alan Hourihane <alanh-at-tungstengraphics-dot-com> - */ - -#include <linux/aperture.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/fb.h> -#include <linux/pci.h> -#include <asm/set_memory.h> -#include <asm/tlbflush.h> -#include <linux/mmzone.h> - -/* #define VERMILION_DEBUG */ - -#include "vermilion.h" - -#define MODULE_NAME "vmlfb" - -#define VML_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16) - -static struct mutex vml_mutex; -static struct list_head global_no_mode; -static struct list_head global_has_mode; -static struct fb_ops vmlfb_ops; -static struct vml_sys *subsys = NULL; -static char *vml_default_mode = "1024x768@60"; -static const struct fb_videomode defaultmode = { - NULL, 60, 1024, 768, 12896, 144, 24, 29, 3, 136, 6, - 0, FB_VMODE_NONINTERLACED -}; - -static u32 vml_mem_requested = (10 * 1024 * 1024); -static u32 vml_mem_contig = (4 * 1024 * 1024); -static u32 vml_mem_min = (4 * 1024 * 1024); - -static u32 vml_clocks[] = { - 6750, - 13500, - 27000, - 29700, - 37125, - 54000, - 59400, - 74250, - 120000, - 148500 -}; - -static u32 vml_num_clocks = ARRAY_SIZE(vml_clocks); - -/* - * Allocate a contiguous vram area and make its linear kernel map - * uncached. - */ - -static int vmlfb_alloc_vram_area(struct vram_area *va, unsigned max_order, - unsigned min_order) -{ - gfp_t flags; - unsigned long i; - - max_order++; - do { - /* - * Really try hard to get the needed memory. - * We need memory below the first 32MB, so we - * add the __GFP_DMA flag that guarantees that we are - * below the first 16MB. - */ - - flags = __GFP_DMA | __GFP_HIGH | __GFP_KSWAPD_RECLAIM; - va->logical = - __get_free_pages(flags, --max_order); - } while (va->logical == 0 && max_order > min_order); - - if (!va->logical) - return -ENOMEM; - - va->phys = virt_to_phys((void *)va->logical); - va->size = PAGE_SIZE << max_order; - va->order = max_order; - - /* - * It seems like __get_free_pages only ups the usage count - * of the first page. This doesn't work with fault mapping, so - * up the usage count once more (XXX: should use split_page or - * compound page). - */ - - memset((void *)va->logical, 0x00, va->size); - for (i = va->logical; i < va->logical + va->size; i += PAGE_SIZE) { - get_page(virt_to_page(i)); - } - - /* - * Change caching policy of the linear kernel map to avoid - * mapping type conflicts with user-space mappings. - */ - set_pages_uc(virt_to_page(va->logical), va->size >> PAGE_SHIFT); - - printk(KERN_DEBUG MODULE_NAME - ": Allocated %ld bytes vram area at 0x%08lx\n", - va->size, va->phys); - - return 0; -} - -/* - * Free a contiguous vram area and reset its linear kernel map - * mapping type. - */ - -static void vmlfb_free_vram_area(struct vram_area *va) -{ - unsigned long j; - - if (va->logical) { - - /* - * Reset the linear kernel map caching policy. - */ - - set_pages_wb(virt_to_page(va->logical), - va->size >> PAGE_SHIFT); - - /* - * Decrease the usage count on the pages we've used - * to compensate for upping when allocating. - */ - - for (j = va->logical; j < va->logical + va->size; - j += PAGE_SIZE) { - (void)put_page_testzero(virt_to_page(j)); - } - - printk(KERN_DEBUG MODULE_NAME - ": Freeing %ld bytes vram area at 0x%08lx\n", - va->size, va->phys); - free_pages(va->logical, va->order); - - va->logical = 0; - } -} - -/* - * Free allocated vram. - */ - -static void vmlfb_free_vram(struct vml_info *vinfo) -{ - int i; - - for (i = 0; i < vinfo->num_areas; ++i) { - vmlfb_free_vram_area(&vinfo->vram[i]); - } - vinfo->num_areas = 0; -} - -/* - * Allocate vram. Currently we try to allocate contiguous areas from the - * __GFP_DMA zone and puzzle them together. A better approach would be to - * allocate one contiguous area for scanout and use one-page allocations for - * offscreen areas. This requires user-space and GPU virtual mappings. - */ - -static int vmlfb_alloc_vram(struct vml_info *vinfo, - size_t requested, - size_t min_total, size_t min_contig) -{ - int i, j; - int order; - int contiguous; - int err; - struct vram_area *va; - struct vram_area *va2; - - vinfo->num_areas = 0; - for (i = 0; i < VML_VRAM_AREAS; ++i) { - va = &vinfo->vram[i]; - order = 0; - - while (requested > (PAGE_SIZE << order) && order <= MAX_PAGE_ORDER) - order++; - - err = vmlfb_alloc_vram_area(va, order, 0); - - if (err) - break; - - if (i == 0) { - vinfo->vram_start = va->phys; - vinfo->vram_logical = (void __iomem *) va->logical; - vinfo->vram_contig_size = va->size; - vinfo->num_areas = 1; - } else { - contiguous = 0; - - for (j = 0; j < i; ++j) { - va2 = &vinfo->vram[j]; - if (va->phys + va->size == va2->phys || - va2->phys + va2->size == va->phys) { - contiguous = 1; - break; - } - } - - if (contiguous) { - vinfo->num_areas++; - if (va->phys < vinfo->vram_start) { - vinfo->vram_start = va->phys; - vinfo->vram_logical = - (void __iomem *)va->logical; - } - vinfo->vram_contig_size += va->size; - } else { - vmlfb_free_vram_area(va); - break; - } - } - - if (requested < va->size) - break; - else - requested -= va->size; - } - - if (vinfo->vram_contig_size > min_total && - vinfo->vram_contig_size > min_contig) { - - printk(KERN_DEBUG MODULE_NAME - ": Contiguous vram: %ld bytes at physical 0x%08lx.\n", - (unsigned long)vinfo->vram_contig_size, - (unsigned long)vinfo->vram_start); - - return 0; - } - - printk(KERN_ERR MODULE_NAME - ": Could not allocate requested minimal amount of vram.\n"); - - vmlfb_free_vram(vinfo); - - return -ENOMEM; -} - -/* - * Find the GPU to use with our display controller. - */ - -static int vmlfb_get_gpu(struct vml_par *par) -{ - mutex_lock(&vml_mutex); - - par->gpu = pci_get_device(PCI_VENDOR_ID_INTEL, VML_DEVICE_GPU, NULL); - - if (!par->gpu) { - mutex_unlock(&vml_mutex); - return -ENODEV; - } - - mutex_unlock(&vml_mutex); - - if (pci_enable_device(par->gpu) < 0) { - pci_dev_put(par->gpu); - return -ENODEV; - } - - return 0; -} - -/* - * Find a contiguous vram area that contains a given offset from vram start. - */ -static int vmlfb_vram_offset(struct vml_info *vinfo, unsigned long offset) -{ - unsigned long aoffset; - unsigned i; - - for (i = 0; i < vinfo->num_areas; ++i) { - aoffset = offset - (vinfo->vram[i].phys - vinfo->vram_start); - - if (aoffset < vinfo->vram[i].size) { - return 0; - } - } - - return -EINVAL; -} - -/* - * Remap the MMIO register spaces of the VDC and the GPU. - */ - -static int vmlfb_enable_mmio(struct vml_par *par) -{ - int err; - - par->vdc_mem_base = pci_resource_start(par->vdc, 0); - par->vdc_mem_size = pci_resource_len(par->vdc, 0); - if (!request_mem_region(par->vdc_mem_base, par->vdc_mem_size, "vmlfb")) { - printk(KERN_ERR MODULE_NAME - ": Could not claim display controller MMIO.\n"); - return -EBUSY; - } - par->vdc_mem = ioremap(par->vdc_mem_base, par->vdc_mem_size); - if (par->vdc_mem == NULL) { - printk(KERN_ERR MODULE_NAME - ": Could not map display controller MMIO.\n"); - err = -ENOMEM; - goto out_err_0; - } - - par->gpu_mem_base = pci_resource_start(par->gpu, 0); - par->gpu_mem_size = pci_resource_len(par->gpu, 0); - if (!request_mem_region(par->gpu_mem_base, par->gpu_mem_size, "vmlfb")) { - printk(KERN_ERR MODULE_NAME ": Could not claim GPU MMIO.\n"); - err = -EBUSY; - goto out_err_1; - } - par->gpu_mem = ioremap(par->gpu_mem_base, par->gpu_mem_size); - if (par->gpu_mem == NULL) { - printk(KERN_ERR MODULE_NAME ": Could not map GPU MMIO.\n"); - err = -ENOMEM; - goto out_err_2; - } - - return 0; - -out_err_2: - release_mem_region(par->gpu_mem_base, par->gpu_mem_size); -out_err_1: - iounmap(par->vdc_mem); -out_err_0: - release_mem_region(par->vdc_mem_base, par->vdc_mem_size); - return err; -} - -/* - * Unmap the VDC and GPU register spaces. - */ - -static void vmlfb_disable_mmio(struct vml_par *par) -{ - iounmap(par->gpu_mem); - release_mem_region(par->gpu_mem_base, par->gpu_mem_size); - iounmap(par->vdc_mem); - release_mem_region(par->vdc_mem_base, par->vdc_mem_size); -} - -/* - * Release and uninit the VDC and GPU. - */ - -static void vmlfb_release_devices(struct vml_par *par) -{ - if (atomic_dec_and_test(&par->refcount)) { - pci_disable_device(par->gpu); - pci_disable_device(par->vdc); - } -} - -/* - * Free up allocated resources for a device. - */ - -static void vml_pci_remove(struct pci_dev *dev) -{ - struct fb_info *info; - struct vml_info *vinfo; - struct vml_par *par; - - info = pci_get_drvdata(dev); - if (info) { - vinfo = container_of(info, struct vml_info, info); - par = vinfo->par; - mutex_lock(&vml_mutex); - unregister_framebuffer(info); - fb_dealloc_cmap(&info->cmap); - vmlfb_free_vram(vinfo); - vmlfb_disable_mmio(par); - vmlfb_release_devices(par); - kfree(vinfo); - kfree(par); - mutex_unlock(&vml_mutex); - } -} - -static void vmlfb_set_pref_pixel_format(struct fb_var_screeninfo *var) -{ - switch (var->bits_per_pixel) { - case 16: - var->blue.offset = 0; - var->blue.length = 5; - var->green.offset = 5; - var->green.length = 5; - var->red.offset = 10; - var->red.length = 5; - var->transp.offset = 15; - var->transp.length = 1; - break; - case 32: - var->blue.offset = 0; - var->blue.length = 8; - var->green.offset = 8; - var->green.length = 8; - var->red.offset = 16; - var->red.length = 8; - var->transp.offset = 24; - var->transp.length = 0; - break; - default: - break; - } - - var->blue.msb_right = var->green.msb_right = - var->red.msb_right = var->transp.msb_right = 0; -} - -/* - * Device initialization. - * We initialize one vml_par struct per device and one vml_info - * struct per pipe. Currently we have only one pipe. - */ - -static int vml_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct vml_info *vinfo; - struct fb_info *info; - struct vml_par *par; - int err; - - err = aperture_remove_conflicting_pci_devices(dev, "vmlfb"); - if (err) - return err; - - par = kzalloc(sizeof(*par), GFP_KERNEL); - if (par == NULL) - return -ENOMEM; - - vinfo = kzalloc(sizeof(*vinfo), GFP_KERNEL); - if (vinfo == NULL) { - err = -ENOMEM; - goto out_err_0; - } - - vinfo->par = par; - par->vdc = dev; - atomic_set(&par->refcount, 1); - - switch (id->device) { - case VML_DEVICE_VDC: - if ((err = vmlfb_get_gpu(par))) - goto out_err_1; - pci_set_drvdata(dev, &vinfo->info); - break; - default: - err = -ENODEV; - goto out_err_1; - } - - info = &vinfo->info; - info->flags = FBINFO_PARTIAL_PAN_OK; - - err = vmlfb_enable_mmio(par); - if (err) - goto out_err_2; - - err = vmlfb_alloc_vram(vinfo, vml_mem_requested, - vml_mem_contig, vml_mem_min); - if (err) - goto out_err_3; - - strcpy(info->fix.id, "Vermilion Range"); - info->fix.mmio_start = 0; - info->fix.mmio_len = 0; - info->fix.smem_start = vinfo->vram_start; - info->fix.smem_len = vinfo->vram_contig_size; - info->fix.type = FB_TYPE_PACKED_PIXELS; - info->fix.visual = FB_VISUAL_TRUECOLOR; - info->fix.ypanstep = 1; - info->fix.xpanstep = 1; - info->fix.ywrapstep = 0; - info->fix.accel = FB_ACCEL_NONE; - info->screen_base = vinfo->vram_logical; - info->pseudo_palette = vinfo->pseudo_palette; - info->par = par; - info->fbops = &vmlfb_ops; - info->device = &dev->dev; - - INIT_LIST_HEAD(&vinfo->head); - vinfo->pipe_disabled = 1; - vinfo->cur_blank_mode = FB_BLANK_UNBLANK; - - info->var.grayscale = 0; - info->var.bits_per_pixel = 16; - vmlfb_set_pref_pixel_format(&info->var); - - if (!fb_find_mode - (&info->var, info, vml_default_mode, NULL, 0, &defaultmode, 16)) { - printk(KERN_ERR MODULE_NAME ": Could not find initial mode\n"); - } - - if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) { - err = -ENOMEM; - goto out_err_4; - } - - err = register_framebuffer(info); - if (err) { - printk(KERN_ERR MODULE_NAME ": Register framebuffer error.\n"); - goto out_err_5; - } - - printk("Initialized vmlfb\n"); - - return 0; - -out_err_5: - fb_dealloc_cmap(&info->cmap); -out_err_4: - vmlfb_free_vram(vinfo); -out_err_3: - vmlfb_disable_mmio(par); -out_err_2: - vmlfb_release_devices(par); -out_err_1: - kfree(vinfo); -out_err_0: - kfree(par); - return err; -} - -static int vmlfb_open(struct fb_info *info, int user) -{ - /* - * Save registers here? - */ - return 0; -} - -static int vmlfb_release(struct fb_info *info, int user) -{ - /* - * Restore registers here. - */ - - return 0; -} - -static int vml_nearest_clock(int clock) -{ - - int i; - int cur_index; - int cur_diff; - int diff; - - cur_index = 0; - cur_diff = clock - vml_clocks[0]; - cur_diff = (cur_diff < 0) ? -cur_diff : cur_diff; - for (i = 1; i < vml_num_clocks; ++i) { - diff = clock - vml_clocks[i]; - diff = (diff < 0) ? -diff : diff; - if (diff < cur_diff) { - cur_index = i; - cur_diff = diff; - } - } - return vml_clocks[cur_index]; -} - -static int vmlfb_check_var_locked(struct fb_var_screeninfo *var, - struct vml_info *vinfo) -{ - u32 pitch; - u64 mem; - int nearest_clock; - int clock; - int clock_diff; - struct fb_var_screeninfo v; - - v = *var; - clock = PICOS2KHZ(var->pixclock); - - if (subsys && subsys->nearest_clock) { - nearest_clock = subsys->nearest_clock(subsys, clock); - } else { - nearest_clock = vml_nearest_clock(clock); - } - - /* - * Accept a 20% diff. - */ - - clock_diff = nearest_clock - clock; - clock_diff = (clock_diff < 0) ? -clock_diff : clock_diff; - if (clock_diff > clock / 5) { -#if 0 - printk(KERN_DEBUG MODULE_NAME ": Diff failure. %d %d\n",clock_diff,clock); -#endif - return -EINVAL; - } - - v.pixclock = KHZ2PICOS(nearest_clock); - - if (var->xres > VML_MAX_XRES || var->yres > VML_MAX_YRES) { - printk(KERN_DEBUG MODULE_NAME ": Resolution failure.\n"); - return -EINVAL; - } - if (var->xres_virtual > VML_MAX_XRES_VIRTUAL) { - printk(KERN_DEBUG MODULE_NAME - ": Virtual resolution failure.\n"); - return -EINVAL; - } - switch (v.bits_per_pixel) { - case 0 ... 16: - v.bits_per_pixel = 16; - break; - case 17 ... 32: - v.bits_per_pixel = 32; - break; - default: - printk(KERN_DEBUG MODULE_NAME ": Invalid bpp: %d.\n", - var->bits_per_pixel); - return -EINVAL; - } - - pitch = ALIGN((var->xres * var->bits_per_pixel) >> 3, 0x40); - mem = (u64)pitch * var->yres_virtual; - if (mem > vinfo->vram_contig_size) { - return -ENOMEM; - } - - switch (v.bits_per_pixel) { - case 16: - if (var->blue.offset != 0 || - var->blue.length != 5 || - var->green.offset != 5 || - var->green.length != 5 || - var->red.offset != 10 || - var->red.length != 5 || - var->transp.offset != 15 || var->transp.length != 1) { - vmlfb_set_pref_pixel_format(&v); - } - break; - case 32: - if (var->blue.offset != 0 || - var->blue.length != 8 || - var->green.offset != 8 || - var->green.length != 8 || - var->red.offset != 16 || - var->red.length != 8 || - (var->transp.length != 0 && var->transp.length != 8) || - (var->transp.length == 8 && var->transp.offset != 24)) { - vmlfb_set_pref_pixel_format(&v); - } - break; - default: - return -EINVAL; - } - - *var = v; - - return 0; -} - -static int vmlfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) -{ - struct vml_info *vinfo = container_of(info, struct vml_info, info); - int ret; - - mutex_lock(&vml_mutex); - ret = vmlfb_check_var_locked(var, vinfo); - mutex_unlock(&vml_mutex); - - return ret; -} - -static void vml_wait_vblank(struct vml_info *vinfo) -{ - /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */ - mdelay(20); -} - -static void vmlfb_disable_pipe(struct vml_info *vinfo) -{ - struct vml_par *par = vinfo->par; - - /* Disable the MDVO pad */ - VML_WRITE32(par, VML_RCOMPSTAT, 0); - while (!(VML_READ32(par, VML_RCOMPSTAT) & VML_MDVO_VDC_I_RCOMP)) ; - - /* Disable display planes */ - VML_WRITE32(par, VML_DSPCCNTR, - VML_READ32(par, VML_DSPCCNTR) & ~VML_GFX_ENABLE); - (void)VML_READ32(par, VML_DSPCCNTR); - /* Wait for vblank for the disable to take effect */ - vml_wait_vblank(vinfo); - - /* Next, disable display pipes */ - VML_WRITE32(par, VML_PIPEACONF, 0); - (void)VML_READ32(par, VML_PIPEACONF); - - vinfo->pipe_disabled = 1; -} - -#ifdef VERMILION_DEBUG -static void vml_dump_regs(struct vml_info *vinfo) -{ - struct vml_par *par = vinfo->par; - - printk(KERN_DEBUG MODULE_NAME ": Modesetting register dump:\n"); - printk(KERN_DEBUG MODULE_NAME ": \tHTOTAL_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_HTOTAL_A)); - printk(KERN_DEBUG MODULE_NAME ": \tHBLANK_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_HBLANK_A)); - printk(KERN_DEBUG MODULE_NAME ": \tHSYNC_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_HSYNC_A)); - printk(KERN_DEBUG MODULE_NAME ": \tVTOTAL_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_VTOTAL_A)); - printk(KERN_DEBUG MODULE_NAME ": \tVBLANK_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_VBLANK_A)); - printk(KERN_DEBUG MODULE_NAME ": \tVSYNC_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_VSYNC_A)); - printk(KERN_DEBUG MODULE_NAME ": \tDSPCSTRIDE : 0x%08x\n", - (unsigned)VML_READ32(par, VML_DSPCSTRIDE)); - printk(KERN_DEBUG MODULE_NAME ": \tDSPCSIZE : 0x%08x\n", - (unsigned)VML_READ32(par, VML_DSPCSIZE)); - printk(KERN_DEBUG MODULE_NAME ": \tDSPCPOS : 0x%08x\n", - (unsigned)VML_READ32(par, VML_DSPCPOS)); - printk(KERN_DEBUG MODULE_NAME ": \tDSPARB : 0x%08x\n", - (unsigned)VML_READ32(par, VML_DSPARB)); - printk(KERN_DEBUG MODULE_NAME ": \tDSPCADDR : 0x%08x\n", - (unsigned)VML_READ32(par, VML_DSPCADDR)); - printk(KERN_DEBUG MODULE_NAME ": \tBCLRPAT_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_BCLRPAT_A)); - printk(KERN_DEBUG MODULE_NAME ": \tCANVSCLR_A : 0x%08x\n", - (unsigned)VML_READ32(par, VML_CANVSCLR_A)); - printk(KERN_DEBUG MODULE_NAME ": \tPIPEASRC : 0x%08x\n", - (unsigned)VML_READ32(par, VML_PIPEASRC)); - printk(KERN_DEBUG MODULE_NAME ": \tPIPEACONF : 0x%08x\n", - (unsigned)VML_READ32(par, VML_PIPEACONF)); - printk(KERN_DEBUG MODULE_NAME ": \tDSPCCNTR : 0x%08x\n", - (unsigned)VML_READ32(par, VML_DSPCCNTR)); - printk(KERN_DEBUG MODULE_NAME ": \tRCOMPSTAT : 0x%08x\n", - (unsigned)VML_READ32(par, VML_RCOMPSTAT)); - printk(KERN_DEBUG MODULE_NAME ": End of modesetting register dump.\n"); -} -#endif - -static int vmlfb_set_par_locked(struct vml_info *vinfo) -{ - struct vml_par *par = vinfo->par; - struct fb_info *info = &vinfo->info; - struct fb_var_screeninfo *var = &info->var; - u32 htotal, hactive, hblank_start, hblank_end, hsync_start, hsync_end; - u32 vtotal, vactive, vblank_start, vblank_end, vsync_start, vsync_end; - u32 dspcntr; - int clock; - - vinfo->bytes_per_pixel = var->bits_per_pixel >> 3; - vinfo->stride = ALIGN(var->xres_virtual * vinfo->bytes_per_pixel, 0x40); - info->fix.line_length = vinfo->stride; - - if (!subsys) - return 0; - - htotal = - var->xres + var->right_margin + var->hsync_len + var->left_margin; - hactive = var->xres; - hblank_start = var->xres; - hblank_end = htotal; - hsync_start = hactive + var->right_margin; - hsync_end = hsync_start + var->hsync_len; - - vtotal = - var->yres + var->lower_margin + var->vsync_len + var->upper_margin; - vactive = var->yres; - vblank_start = var->yres; - vblank_end = vtotal; - vsync_start = vactive + var->lower_margin; - vsync_end = vsync_start + var->vsync_len; - - dspcntr = VML_GFX_ENABLE | VML_GFX_GAMMABYPASS; - clock = PICOS2KHZ(var->pixclock); - - if (subsys->nearest_clock) { - clock = subsys->nearest_clock(subsys, clock); - } else { - clock = vml_nearest_clock(clock); - } - printk(KERN_DEBUG MODULE_NAME - ": Set mode Hfreq : %d kHz, Vfreq : %d Hz.\n", clock / htotal, - ((clock / htotal) * 1000) / vtotal); - - switch (var->bits_per_pixel) { - case 16: - dspcntr |= VML_GFX_ARGB1555; - break; - case 32: - if (var->transp.length == 8) - dspcntr |= VML_GFX_ARGB8888 | VML_GFX_ALPHAMULT; - else - dspcntr |= VML_GFX_RGB0888; - break; - default: - return -EINVAL; - } - - vmlfb_disable_pipe(vinfo); - mb(); - - if (subsys->set_clock) - subsys->set_clock(subsys, clock); - else - return -EINVAL; - - VML_WRITE32(par, VML_HTOTAL_A, ((htotal - 1) << 16) | (hactive - 1)); - VML_WRITE32(par, VML_HBLANK_A, - ((hblank_end - 1) << 16) | (hblank_start - 1)); - VML_WRITE32(par, VML_HSYNC_A, - ((hsync_end - 1) << 16) | (hsync_start - 1)); - VML_WRITE32(par, VML_VTOTAL_A, ((vtotal - 1) << 16) | (vactive - 1)); - VML_WRITE32(par, VML_VBLANK_A, - ((vblank_end - 1) << 16) | (vblank_start - 1)); - VML_WRITE32(par, VML_VSYNC_A, - ((vsync_end - 1) << 16) | (vsync_start - 1)); - VML_WRITE32(par, VML_DSPCSTRIDE, vinfo->stride); - VML_WRITE32(par, VML_DSPCSIZE, - ((var->yres - 1) << 16) | (var->xres - 1)); - VML_WRITE32(par, VML_DSPCPOS, 0x00000000); - VML_WRITE32(par, VML_DSPARB, VML_FIFO_DEFAULT); - VML_WRITE32(par, VML_BCLRPAT_A, 0x00000000); - VML_WRITE32(par, VML_CANVSCLR_A, 0x00000000); - VML_WRITE32(par, VML_PIPEASRC, - ((var->xres - 1) << 16) | (var->yres - 1)); - - wmb(); - VML_WRITE32(par, VML_PIPEACONF, VML_PIPE_ENABLE); - wmb(); - VML_WRITE32(par, VML_DSPCCNTR, dspcntr); - wmb(); - VML_WRITE32(par, VML_DSPCADDR, (u32) vinfo->vram_start + - var->yoffset * vinfo->stride + - var->xoffset * vinfo->bytes_per_pixel); - - VML_WRITE32(par, VML_RCOMPSTAT, VML_MDVO_PAD_ENABLE); - - while (!(VML_READ32(par, VML_RCOMPSTAT) & - (VML_MDVO_VDC_I_RCOMP | VML_MDVO_PAD_ENABLE))) ; - - vinfo->pipe_disabled = 0; -#ifdef VERMILION_DEBUG - vml_dump_regs(vinfo); -#endif - - return 0; -} - -static int vmlfb_set_par(struct fb_info *info) -{ - struct vml_info *vinfo = container_of(info, struct vml_info, info); - int ret; - - mutex_lock(&vml_mutex); - list_move(&vinfo->head, (subsys) ? &global_has_mode : &global_no_mode); - ret = vmlfb_set_par_locked(vinfo); - - mutex_unlock(&vml_mutex); - return ret; -} - -static int vmlfb_blank_locked(struct vml_info *vinfo) -{ - struct vml_par *par = vinfo->par; - u32 cur = VML_READ32(par, VML_PIPEACONF); - - switch (vinfo->cur_blank_mode) { - case FB_BLANK_UNBLANK: - if (vinfo->pipe_disabled) { - vmlfb_set_par_locked(vinfo); - } - VML_WRITE32(par, VML_PIPEACONF, cur & ~VML_PIPE_FORCE_BORDER); - (void)VML_READ32(par, VML_PIPEACONF); - break; - case FB_BLANK_NORMAL: - if (vinfo->pipe_disabled) { - vmlfb_set_par_locked(vinfo); - } - VML_WRITE32(par, VML_PIPEACONF, cur | VML_PIPE_FORCE_BORDER); - (void)VML_READ32(par, VML_PIPEACONF); - break; - case FB_BLANK_VSYNC_SUSPEND: - case FB_BLANK_HSYNC_SUSPEND: - if (!vinfo->pipe_disabled) { - vmlfb_disable_pipe(vinfo); - } - break; - case FB_BLANK_POWERDOWN: - if (!vinfo->pipe_disabled) { - vmlfb_disable_pipe(vinfo); - } - break; - default: - return -EINVAL; - } - - return 0; -} - -static int vmlfb_blank(int blank_mode, struct fb_info *info) -{ - struct vml_info *vinfo = container_of(info, struct vml_info, info); - int ret; - - mutex_lock(&vml_mutex); - vinfo->cur_blank_mode = blank_mode; - ret = vmlfb_blank_locked(vinfo); - mutex_unlock(&vml_mutex); - return ret; -} - -static int vmlfb_pan_display(struct fb_var_screeninfo *var, - struct fb_info *info) -{ - struct vml_info *vinfo = container_of(info, struct vml_info, info); - struct vml_par *par = vinfo->par; - - mutex_lock(&vml_mutex); - VML_WRITE32(par, VML_DSPCADDR, (u32) vinfo->vram_start + - var->yoffset * vinfo->stride + - var->xoffset * vinfo->bytes_per_pixel); - (void)VML_READ32(par, VML_DSPCADDR); - mutex_unlock(&vml_mutex); - - return 0; -} - -static int vmlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, - u_int transp, struct fb_info *info) -{ - u32 v; - - if (regno >= 16) - return -EINVAL; - - if (info->var.grayscale) { - red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; - } - - if (info->fix.visual != FB_VISUAL_TRUECOLOR) - return -EINVAL; - - red = VML_TOHW(red, info->var.red.length); - blue = VML_TOHW(blue, info->var.blue.length); - green = VML_TOHW(green, info->var.green.length); - transp = VML_TOHW(transp, info->var.transp.length); - - v = (red << info->var.red.offset) | - (green << info->var.green.offset) | - (blue << info->var.blue.offset) | - (transp << info->var.transp.offset); - - switch (info->var.bits_per_pixel) { - case 16: - ((u32 *) info->pseudo_palette)[regno] = v; - break; - case 24: - case 32: - ((u32 *) info->pseudo_palette)[regno] = v; - break; - } - return 0; -} - -static int vmlfb_mmap(struct fb_info *info, struct vm_area_struct *vma) -{ - struct vml_info *vinfo = container_of(info, struct vml_info, info); - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - int ret; - unsigned long prot; - - ret = vmlfb_vram_offset(vinfo, offset); - if (ret) - return -EINVAL; - - prot = pgprot_val(vma->vm_page_prot) & ~_PAGE_CACHE_MASK; - pgprot_val(vma->vm_page_prot) = - prot | cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS); - - return vm_iomap_memory(vma, vinfo->vram_start, - vinfo->vram_contig_size); -} - -static int vmlfb_sync(struct fb_info *info) -{ - return 0; -} - -static int vmlfb_cursor(struct fb_info *info, struct fb_cursor *cursor) -{ - return -EINVAL; /* just to force soft_cursor() call */ -} - -static struct fb_ops vmlfb_ops = { - .owner = THIS_MODULE, - .fb_open = vmlfb_open, - .fb_release = vmlfb_release, - __FB_DEFAULT_IOMEM_OPS_RDWR, - .fb_check_var = vmlfb_check_var, - .fb_set_par = vmlfb_set_par, - .fb_blank = vmlfb_blank, - .fb_pan_display = vmlfb_pan_display, - __FB_DEFAULT_IOMEM_OPS_DRAW, - .fb_cursor = vmlfb_cursor, - .fb_sync = vmlfb_sync, - .fb_mmap = vmlfb_mmap, - .fb_setcolreg = vmlfb_setcolreg -}; - -static const struct pci_device_id vml_ids[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, VML_DEVICE_VDC)}, - {0} -}; - -static struct pci_driver vmlfb_pci_driver = { - .name = "vmlfb", - .id_table = vml_ids, - .probe = vml_pci_probe, - .remove = vml_pci_remove, -}; - -static void __exit vmlfb_cleanup(void) -{ - pci_unregister_driver(&vmlfb_pci_driver); -} - -static int __init vmlfb_init(void) -{ - -#ifndef MODULE - char *option = NULL; -#endif - - if (fb_modesetting_disabled("vmlfb")) - return -ENODEV; - -#ifndef MODULE - if (fb_get_options(MODULE_NAME, &option)) - return -ENODEV; -#endif - - printk(KERN_DEBUG MODULE_NAME ": initializing\n"); - mutex_init(&vml_mutex); - INIT_LIST_HEAD(&global_no_mode); - INIT_LIST_HEAD(&global_has_mode); - - return pci_register_driver(&vmlfb_pci_driver); -} - -int vmlfb_register_subsys(struct vml_sys *sys) -{ - struct vml_info *entry; - struct list_head *list; - u32 save_activate; - - mutex_lock(&vml_mutex); - if (subsys != NULL) { - subsys->restore(subsys); - } - subsys = sys; - subsys->save(subsys); - - /* - * We need to restart list traversal for each item, since we - * release the list mutex in the loop. - */ - - list = global_no_mode.next; - while (list != &global_no_mode) { - list_del_init(list); - entry = list_entry(list, struct vml_info, head); - - /* - * First, try the current mode which might not be - * completely validated with respect to the pixel clock. - */ - - if (!vmlfb_check_var_locked(&entry->info.var, entry)) { - vmlfb_set_par_locked(entry); - list_add_tail(list, &global_has_mode); - } else { - - /* - * Didn't work. Try to find another mode, - * that matches this subsys. - */ - - mutex_unlock(&vml_mutex); - save_activate = entry->info.var.activate; - entry->info.var.bits_per_pixel = 16; - vmlfb_set_pref_pixel_format(&entry->info.var); - if (fb_find_mode(&entry->info.var, - &entry->info, - vml_default_mode, NULL, 0, NULL, 16)) { - entry->info.var.activate |= - FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; - fb_set_var(&entry->info, &entry->info.var); - } else { - printk(KERN_ERR MODULE_NAME - ": Sorry. no mode found for this subsys.\n"); - } - entry->info.var.activate = save_activate; - mutex_lock(&vml_mutex); - } - vmlfb_blank_locked(entry); - list = global_no_mode.next; - } - mutex_unlock(&vml_mutex); - - printk(KERN_DEBUG MODULE_NAME ": Registered %s subsystem.\n", - subsys->name ? subsys->name : "unknown"); - return 0; -} - -EXPORT_SYMBOL_GPL(vmlfb_register_subsys); - -void vmlfb_unregister_subsys(struct vml_sys *sys) -{ - struct vml_info *entry, *next; - - mutex_lock(&vml_mutex); - if (subsys != sys) { - mutex_unlock(&vml_mutex); - return; - } - subsys->restore(subsys); - subsys = NULL; - list_for_each_entry_safe(entry, next, &global_has_mode, head) { - printk(KERN_DEBUG MODULE_NAME ": subsys disable pipe\n"); - vmlfb_disable_pipe(entry); - list_move_tail(&entry->head, &global_no_mode); - } - mutex_unlock(&vml_mutex); -} - -EXPORT_SYMBOL_GPL(vmlfb_unregister_subsys); - -module_init(vmlfb_init); -module_exit(vmlfb_cleanup); - -MODULE_AUTHOR("Tungsten Graphics"); -MODULE_DESCRIPTION("Initialization of the Vermilion display devices"); -MODULE_VERSION("1.0.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/vermilion/vermilion.h b/drivers/video/fbdev/vermilion/vermilion.h deleted file mode 100644 index 19cbbe76aba7..000000000000 --- a/drivers/video/fbdev/vermilion/vermilion.h +++ /dev/null @@ -1,245 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) Intel Corp. 2007. - * All Rights Reserved. - * - * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to - * develop this driver. - * - * This file is part of the Vermilion Range fb driver. - * - * Authors: - * Thomas Hellström <thomas-at-tungstengraphics-dot-com> - */ - -#ifndef _VERMILION_H_ -#define _VERMILION_H_ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/atomic.h> -#include <linux/mutex.h> - -#define VML_DEVICE_GPU 0x5002 -#define VML_DEVICE_VDC 0x5009 - -#define VML_VRAM_AREAS 3 -#define VML_MAX_XRES 1024 -#define VML_MAX_YRES 768 -#define VML_MAX_XRES_VIRTUAL 1040 - -/* - * Display controller registers: - */ - -/* Display controller 10-bit color representation */ - -#define VML_R_MASK 0x3FF00000 -#define VML_R_SHIFT 20 -#define VML_G_MASK 0x000FFC00 -#define VML_G_SHIFT 10 -#define VML_B_MASK 0x000003FF -#define VML_B_SHIFT 0 - -/* Graphics plane control */ -#define VML_DSPCCNTR 0x00072180 -#define VML_GFX_ENABLE 0x80000000 -#define VML_GFX_GAMMABYPASS 0x40000000 -#define VML_GFX_ARGB1555 0x0C000000 -#define VML_GFX_RGB0888 0x18000000 -#define VML_GFX_ARGB8888 0x1C000000 -#define VML_GFX_ALPHACONST 0x02000000 -#define VML_GFX_ALPHAMULT 0x01000000 -#define VML_GFX_CONST_ALPHA 0x000000FF - -/* Graphics plane start address. Pixel aligned. */ -#define VML_DSPCADDR 0x00072184 - -/* Graphics plane stride register. */ -#define VML_DSPCSTRIDE 0x00072188 - -/* Graphics plane position register. */ -#define VML_DSPCPOS 0x0007218C -#define VML_POS_YMASK 0x0FFF0000 -#define VML_POS_YSHIFT 16 -#define VML_POS_XMASK 0x00000FFF -#define VML_POS_XSHIFT 0 - -/* Graphics plane height and width */ -#define VML_DSPCSIZE 0x00072190 -#define VML_SIZE_HMASK 0x0FFF0000 -#define VML_SIZE_HSHIFT 16 -#define VML_SISE_WMASK 0x00000FFF -#define VML_SIZE_WSHIFT 0 - -/* Graphics plane gamma correction lookup table registers (129 * 32 bits) */ -#define VML_DSPCGAMLUT 0x00072200 - -/* Pixel video output configuration register */ -#define VML_PVOCONFIG 0x00061140 -#define VML_CONFIG_BASE 0x80000000 -#define VML_CONFIG_PIXEL_SWAP 0x04000000 -#define VML_CONFIG_DE_INV 0x01000000 -#define VML_CONFIG_HREF_INV 0x00400000 -#define VML_CONFIG_VREF_INV 0x00100000 -#define VML_CONFIG_CLK_INV 0x00040000 -#define VML_CONFIG_CLK_DIV2 0x00010000 -#define VML_CONFIG_ESTRB_INV 0x00008000 - -/* Pipe A Horizontal total register */ -#define VML_HTOTAL_A 0x00060000 -#define VML_HTOTAL_MASK 0x1FFF0000 -#define VML_HTOTAL_SHIFT 16 -#define VML_HTOTAL_VAL 8192 -#define VML_HACTIVE_MASK 0x000007FF -#define VML_HACTIVE_SHIFT 0 -#define VML_HACTIVE_VAL 4096 - -/* Pipe A Horizontal Blank register */ -#define VML_HBLANK_A 0x00060004 -#define VML_HBLANK_END_MASK 0x1FFF0000 -#define VML_HBLANK_END_SHIFT 16 -#define VML_HBLANK_END_VAL 8192 -#define VML_HBLANK_START_MASK 0x00001FFF -#define VML_HBLANK_START_SHIFT 0 -#define VML_HBLANK_START_VAL 8192 - -/* Pipe A Horizontal Sync register */ -#define VML_HSYNC_A 0x00060008 -#define VML_HSYNC_END_MASK 0x1FFF0000 -#define VML_HSYNC_END_SHIFT 16 -#define VML_HSYNC_END_VAL 8192 -#define VML_HSYNC_START_MASK 0x00001FFF -#define VML_HSYNC_START_SHIFT 0 -#define VML_HSYNC_START_VAL 8192 - -/* Pipe A Vertical total register */ -#define VML_VTOTAL_A 0x0006000C -#define VML_VTOTAL_MASK 0x1FFF0000 -#define VML_VTOTAL_SHIFT 16 -#define VML_VTOTAL_VAL 8192 -#define VML_VACTIVE_MASK 0x000007FF -#define VML_VACTIVE_SHIFT 0 -#define VML_VACTIVE_VAL 4096 - -/* Pipe A Vertical Blank register */ -#define VML_VBLANK_A 0x00060010 -#define VML_VBLANK_END_MASK 0x1FFF0000 -#define VML_VBLANK_END_SHIFT 16 -#define VML_VBLANK_END_VAL 8192 -#define VML_VBLANK_START_MASK 0x00001FFF -#define VML_VBLANK_START_SHIFT 0 -#define VML_VBLANK_START_VAL 8192 - -/* Pipe A Vertical Sync register */ -#define VML_VSYNC_A 0x00060014 -#define VML_VSYNC_END_MASK 0x1FFF0000 -#define VML_VSYNC_END_SHIFT 16 -#define VML_VSYNC_END_VAL 8192 -#define VML_VSYNC_START_MASK 0x00001FFF -#define VML_VSYNC_START_SHIFT 0 -#define VML_VSYNC_START_VAL 8192 - -/* Pipe A Source Image size (minus one - equal to active size) - * Programmable while pipe is enabled. - */ -#define VML_PIPEASRC 0x0006001C -#define VML_PIPEASRC_HMASK 0x0FFF0000 -#define VML_PIPEASRC_HSHIFT 16 -#define VML_PIPEASRC_VMASK 0x00000FFF -#define VML_PIPEASRC_VSHIFT 0 - -/* Pipe A Border Color Pattern register (10 bit color) */ -#define VML_BCLRPAT_A 0x00060020 - -/* Pipe A Canvas Color register (10 bit color) */ -#define VML_CANVSCLR_A 0x00060024 - -/* Pipe A Configuration register */ -#define VML_PIPEACONF 0x00070008 -#define VML_PIPE_BASE 0x00000000 -#define VML_PIPE_ENABLE 0x80000000 -#define VML_PIPE_FORCE_BORDER 0x02000000 -#define VML_PIPE_PLANES_OFF 0x00080000 -#define VML_PIPE_ARGB_OUTPUT_MODE 0x00040000 - -/* Pipe A FIFO setting */ -#define VML_DSPARB 0x00070030 -#define VML_FIFO_DEFAULT 0x00001D9C - -/* MDVO rcomp status & pads control register */ -#define VML_RCOMPSTAT 0x00070048 -#define VML_MDVO_VDC_I_RCOMP 0x80000000 -#define VML_MDVO_POWERSAVE_OFF 0x00000008 -#define VML_MDVO_PAD_ENABLE 0x00000004 -#define VML_MDVO_PULLDOWN_ENABLE 0x00000001 - -struct vml_par { - struct pci_dev *vdc; - u64 vdc_mem_base; - u64 vdc_mem_size; - char __iomem *vdc_mem; - - struct pci_dev *gpu; - u64 gpu_mem_base; - u64 gpu_mem_size; - char __iomem *gpu_mem; - - atomic_t refcount; -}; - -struct vram_area { - unsigned long logical; - unsigned long phys; - unsigned long size; - unsigned order; -}; - -struct vml_info { - struct fb_info info; - struct vml_par *par; - struct list_head head; - struct vram_area vram[VML_VRAM_AREAS]; - u64 vram_start; - u64 vram_contig_size; - u32 num_areas; - void __iomem *vram_logical; - u32 pseudo_palette[16]; - u32 stride; - u32 bytes_per_pixel; - atomic_t vmas; - int cur_blank_mode; - int pipe_disabled; -}; - -/* - * Subsystem - */ - -struct vml_sys { - char *name; - - /* - * Save / Restore; - */ - - int (*save) (struct vml_sys * sys); - int (*restore) (struct vml_sys * sys); - - /* - * PLL programming; - */ - - int (*set_clock) (struct vml_sys * sys, int clock); - int (*nearest_clock) (const struct vml_sys * sys, int clock); -}; - -extern int vmlfb_register_subsys(struct vml_sys *sys); -extern void vmlfb_unregister_subsys(struct vml_sys *sys); - -#define VML_READ32(_par, _offset) \ - (ioread32((_par)->vdc_mem + (_offset))) -#define VML_WRITE32(_par, _offset, _value) \ - iowrite32(_value, (_par)->vdc_mem + (_offset)) - -#endif |