summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/Kconfig22
-rw-r--r--drivers/acpi/Makefile8
-rw-r--r--drivers/acpi/ac.c3
-rw-r--r--drivers/acpi/acpi_memhotplug.c1
-rw-r--r--drivers/acpi/battery.c3
-rw-r--r--drivers/acpi/bus.c11
-rw-r--r--drivers/acpi/button.c3
-rw-r--r--drivers/acpi/cm_sbs.c7
-rw-r--r--drivers/acpi/container.c1
-rw-r--r--drivers/acpi/debug.c15
-rw-r--r--drivers/acpi/ec.c97
-rw-r--r--drivers/acpi/events/evgpe.c2
-rw-r--r--drivers/acpi/events/evxfevnt.c41
-rw-r--r--drivers/acpi/fan.c1
-rw-r--r--drivers/acpi/glue.c40
-rw-r--r--drivers/acpi/pci_link.c11
-rw-r--r--drivers/acpi/pci_root.c6
-rw-r--r--drivers/acpi/power.c11
-rw-r--r--drivers/acpi/processor_core.c93
-rw-r--r--drivers/acpi/processor_idle.c1
-rw-r--r--drivers/acpi/processor_perflib.c2
-rw-r--r--drivers/acpi/processor_thermal.c1
-rw-r--r--drivers/acpi/processor_throttling.c2
-rw-r--r--drivers/acpi/reboot.c25
-rw-r--r--drivers/acpi/scan.c42
-rw-r--r--drivers/acpi/sleep/proc.c4
-rw-r--r--drivers/acpi/sleep/wakeup.c8
-rw-r--r--drivers/acpi/system.c48
-rw-r--r--drivers/acpi/tables/tbfadt.c2
-rw-r--r--drivers/acpi/thermal.c9
-rw-r--r--drivers/acpi/video.c42
-rw-r--r--drivers/acpi/video_detect.c267
-rw-r--r--drivers/acpi/wmi.c2
-rw-r--r--drivers/ata/libata-core.c68
-rw-r--r--drivers/ata/libata-eh.c21
-rw-r--r--drivers/ata/libata-scsi.c23
-rw-r--r--drivers/ata/libata.h19
-rw-r--r--drivers/ata/pata_cs5535.c1
-rw-r--r--drivers/ata/pata_cs5536.c1
-rw-r--r--drivers/ata/pata_pcmcia.c1
-rw-r--r--drivers/ata/pata_sch.c2
-rw-r--r--drivers/block/cciss.c28
-rw-r--r--drivers/block/cpqarray.c7
-rw-r--r--drivers/char/ipmi/ipmi_msghandler.c20
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c16
-rw-r--r--drivers/char/isicom.c6
-rw-r--r--drivers/char/mxser.c3
-rw-r--r--drivers/char/sonypi.c4
-rw-r--r--drivers/char/vt.c10
-rw-r--r--drivers/cpuidle/cpuidle.c4
-rw-r--r--drivers/dca/dca-core.c2
-rw-r--r--drivers/dma/dmaengine.c4
-rw-r--r--drivers/dma/dmatest.c22
-rw-r--r--drivers/dma/ioat_dma.c11
-rw-r--r--drivers/dma/iop-adma.c11
-rw-r--r--drivers/dma/iovlock.c17
-rw-r--r--drivers/edac/i5000_edac.c4
-rw-r--r--drivers/firewire/fw-device.c14
-rw-r--r--drivers/firewire/fw-ohci.c2
-rw-r--r--drivers/firewire/fw-sbp2.c2
-rw-r--r--drivers/firmware/dmi_scan.c6
-rw-r--r--drivers/gpio/Kconfig8
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/xilinx_gpio.c235
-rw-r--r--drivers/gpu/drm/drm_drv.c10
-rw-r--r--drivers/gpu/drm/drm_irq.c80
-rw-r--r--drivers/gpu/drm/drm_lock.c9
-rw-r--r--drivers/gpu/drm/drm_stub.c1
-rw-r--r--drivers/gpu/drm/i915/i915_dma.c16
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h19
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c8
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c383
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h3
-rw-r--r--drivers/gpu/drm/i915/i915_suspend.c9
-rw-r--r--drivers/gpu/drm/radeon/radeon_cp.c15
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.h2
-rw-r--r--drivers/hid/hid-core.c1
-rw-r--r--drivers/hid/hid-ids.h3
-rw-r--r--drivers/hwmon/Kconfig29
-rw-r--r--drivers/hwmon/Makefile2
-rw-r--r--drivers/hwmon/adt7462.c2002
-rw-r--r--drivers/hwmon/adt7470.c75
-rw-r--r--drivers/hwmon/adt7473.c89
-rw-r--r--drivers/hwmon/applesmc.c42
-rw-r--r--drivers/hwmon/ibmaem.c18
-rw-r--r--drivers/hwmon/lis3lv02d.c582
-rw-r--r--drivers/hwmon/lis3lv02d.h149
-rw-r--r--drivers/hwmon/lm85.c52
-rw-r--r--drivers/idle/Kconfig3
-rw-r--r--drivers/ieee1394/dv1394.c10
-rw-r--r--drivers/ieee1394/hosts.c4
-rw-r--r--drivers/ieee1394/nodemgr.c14
-rw-r--r--drivers/ieee1394/raw1394.c9
-rw-r--r--drivers/infiniband/hw/cxgb3/iwch_provider.c6
-rw-r--r--drivers/infiniband/hw/cxgb3/iwch_qp.c1
-rw-r--r--drivers/infiniband/hw/ehca/ehca_irq.c44
-rw-r--r--drivers/infiniband/hw/ehca/ehca_qp.c5
-rw-r--r--drivers/infiniband/hw/ipath/ipath_ruc.c10
-rw-r--r--drivers/infiniband/hw/mlx4/mr.c1
-rw-r--r--drivers/infiniband/hw/nes/nes.c16
-rw-r--r--drivers/infiniband/hw/nes/nes_hw.h1
-rw-r--r--drivers/infiniband/hw/nes/nes_verbs.c64
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib_main.c6
-rw-r--r--drivers/md/linear.c2
-rw-r--r--drivers/md/md.c6
-rw-r--r--drivers/md/raid10.c2
-rw-r--r--drivers/media/dvb/dvb-core/dvb_frontend.c2
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig3
-rw-r--r--drivers/media/dvb/dvb-usb/af9015.c14
-rw-r--r--drivers/media/dvb/dvb-usb/af9015.h1
-rw-r--r--drivers/media/dvb/dvb-usb/anysee.c4
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-urb.c6
-rw-r--r--drivers/media/dvb/frontends/af9013.c6
-rw-r--r--drivers/media/radio/Kconfig14
-rw-r--r--drivers/media/radio/radio-si470x.c19
-rw-r--r--drivers/media/video/cafe_ccic.c6
-rw-r--r--drivers/media/video/compat_ioctl32.c3
-rw-r--r--drivers/media/video/cx18/cx18-driver.c17
-rw-r--r--drivers/media/video/cx18/cx18-driver.h20
-rw-r--r--drivers/media/video/cx18/cx18-dvb.c23
-rw-r--r--drivers/media/video/cx18/cx18-dvb.h1
-rw-r--r--drivers/media/video/cx18/cx18-io.c17
-rw-r--r--drivers/media/video/cx18/cx18-io.h17
-rw-r--r--drivers/media/video/cx18/cx18-irq.c96
-rw-r--r--drivers/media/video/cx18/cx18-irq.h4
-rw-r--r--drivers/media/video/cx18/cx18-mailbox.c6
-rw-r--r--drivers/media/video/cx18/cx18-queue.c14
-rw-r--r--drivers/media/video/cx18/cx18-scb.h40
-rw-r--r--drivers/media/video/cx88/cx88-blackbird.c12
-rw-r--r--drivers/media/video/cx88/cx88-dvb.c5
-rw-r--r--drivers/media/video/cx88/cx88-mpeg.c28
-rw-r--r--drivers/media/video/cx88/cx88-video.c10
-rw-r--r--drivers/media/video/cx88/cx88.h1
-rw-r--r--drivers/media/video/gspca/Kconfig144
-rw-r--r--drivers/media/video/gspca/zc3xx.c12
-rw-r--r--drivers/media/video/ivtv/Kconfig5
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.c26
-rw-r--r--drivers/media/video/saa7110.c4
-rw-r--r--drivers/media/video/saa7134/saa7134-core.c3
-rw-r--r--drivers/media/video/usbvideo/ibmcam.c12
-rw-r--r--drivers/message/fusion/mptlan.c108
-rw-r--r--drivers/misc/Kconfig16
-rw-r--r--drivers/misc/Makefile2
-rw-r--r--drivers/misc/acer-wmi.c6
-rw-r--r--drivers/misc/asus-laptop.c10
-rw-r--r--drivers/misc/c2port/Kconfig35
-rw-r--r--drivers/misc/c2port/Makefile3
-rw-r--r--drivers/misc/c2port/c2port-duramar2150.c158
-rw-r--r--drivers/misc/c2port/core.c1002
-rw-r--r--drivers/misc/compal-laptop.c12
-rw-r--r--drivers/misc/eeepc-laptop.c12
-rw-r--r--drivers/misc/fujitsu-laptop.c43
-rw-r--r--drivers/misc/ics932s401.c515
-rw-r--r--drivers/misc/intel_menlow.c10
-rw-r--r--drivers/misc/msi-laptop.c16
-rw-r--r--drivers/misc/sony-laptop.c6
-rw-r--r--drivers/misc/thinkpad_acpi.c29
-rw-r--r--drivers/mmc/core/bus.c3
-rw-r--r--drivers/mmc/core/core.c6
-rw-r--r--drivers/mmc/core/host.c5
-rw-r--r--drivers/mmc/core/sdio_bus.c3
-rw-r--r--drivers/mmc/host/mmc_spi.c2
-rw-r--r--drivers/mmc/host/sdhci.c2
-rw-r--r--drivers/mmc/host/tifm_sd.c16
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c13
-rw-r--r--drivers/mtd/chips/jedec_probe.c10
-rw-r--r--drivers/mtd/maps/cdb89712.c13
-rw-r--r--drivers/mtd/maps/h720x-flash.c6
-rw-r--r--drivers/net/bnx2.c9
-rw-r--r--drivers/net/cxgb3/cxgb3_main.c4
-rw-r--r--drivers/net/cxgb3/t3_hw.c8
-rw-r--r--drivers/net/mlx4/en_netdev.c2
-rw-r--r--drivers/net/mlx4/mlx4.h9
-rw-r--r--drivers/net/myri10ge/myri10ge.c4
-rw-r--r--drivers/net/niu.c3
-rw-r--r--drivers/net/sfc/ethtool.c4
-rw-r--r--drivers/net/smc911x.c4
-rw-r--r--drivers/net/usb/hso.c12
-rw-r--r--drivers/net/wireless/ath5k/base.c4
-rw-r--r--drivers/net/wireless/ath5k/desc.c16
-rw-r--r--drivers/net/wireless/hostap/hostap_wlan.h5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-scan.c7
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c15
-rw-r--r--drivers/net/wireless/rtl8187_dev.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_usb.c2
-rw-r--r--drivers/oprofile/event_buffer.c6
-rw-r--r--drivers/pci/pci-acpi.c15
-rw-r--r--drivers/pci/pci-sysfs.c2
-rw-r--r--drivers/pci/quirks.c36
-rw-r--r--drivers/pci/rom.c6
-rw-r--r--drivers/ps3/ps3-lpm.c1
-rw-r--r--drivers/regulator/Kconfig15
-rw-r--r--drivers/rtc/Kconfig29
-rw-r--r--drivers/rtc/Makefile3
-rw-r--r--drivers/rtc/interface.c2
-rw-r--r--drivers/rtc/rtc-cmos.c2
-rw-r--r--drivers/rtc/rtc-ds1390.c220
-rw-r--r--drivers/rtc/rtc-rx8581.c281
-rw-r--r--drivers/rtc/rtc-wm8350.c514
-rw-r--r--drivers/serial/atmel_serial.c17
-rw-r--r--drivers/spi/atmel_spi.c3
-rw-r--r--drivers/ssb/Kconfig5
-rw-r--r--drivers/staging/Kconfig20
-rw-r--r--drivers/staging/usbip/Kconfig2
-rw-r--r--drivers/telephony/phonedev.c2
-rw-r--r--drivers/usb/serial/ir-usb.c2
-rw-r--r--drivers/video/Kconfig32
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/fbmem.c63
-rw-r--r--drivers/video/mb862xx/Makefile5
-rw-r--r--drivers/video/mb862xx/mb862xx_reg.h138
-rw-r--r--drivers/video/mb862xx/mb862xxfb.c1061
-rw-r--r--drivers/video/mb862xx/mb862xxfb.h83
-rw-r--r--drivers/w1/masters/Kconfig7
-rw-r--r--drivers/w1/masters/Makefile1
-rw-r--r--drivers/w1/masters/omap_hdq.c725
-rw-r--r--drivers/w1/slaves/Kconfig7
-rw-r--r--drivers/w1/slaves/Makefile2
-rw-r--r--drivers/w1/slaves/w1_bq27000.c123
-rw-r--r--drivers/w1/w1.h1
-rw-r--r--drivers/w1/w1_io.c3
-rw-r--r--drivers/watchdog/Kconfig8
-rw-r--r--drivers/watchdog/at91sam9_wdt.c2
-rw-r--r--drivers/watchdog/booke_wdt.c5
225 files changed, 9865 insertions, 1566 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index f4f632917509..b0243fd55ac0 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -312,9 +312,13 @@ config ACPI_DEBUG
bool "Debug Statements"
default n
help
- The ACPI driver can optionally report errors with a great deal
- of verbosity. Saying Y enables these statements. This will increase
- your kernel size by around 50K.
+ The ACPI subsystem can produce debug output. Saying Y enables this
+ output and increases the kernel size by around 50K.
+
+ Use the acpi.debug_layer and acpi.debug_level kernel command-line
+ parameters documented in Documentation/acpi/debug.txt and
+ Documentation/kernel-parameters.txt to control the type and
+ amount of debug output.
config ACPI_DEBUG_FUNC_TRACE
bool "Additionally enable ACPI function tracing"
@@ -324,14 +328,6 @@ config ACPI_DEBUG_FUNC_TRACE
ACPI Debug Statements slow down ACPI processing. Function trace
is about half of the penalty and is rarely useful.
-config ACPI_EC
- bool
- default y
- help
- This driver is required on some systems for the proper operation of
- the battery and thermal drivers. If you are compiling for a
- mobile system, say Y.
-
config ACPI_PCI_SLOT
tristate "PCI slot detection driver"
default n
@@ -341,10 +337,6 @@ config ACPI_PCI_SLOT
help you correlate PCI bus addresses with the physical geography
of your slots. If you are unsure, say N.
-config ACPI_POWER
- bool
- default y
-
config ACPI_SYSTEM
bool
default y
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d91c027ece8f..3c0c93300f12 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -39,19 +39,23 @@ obj-y += sleep/
obj-y += bus.o glue.o
obj-y += scan.o
# Keep EC driver first. Initialization of others depend on it.
-obj-$(CONFIG_ACPI_EC) += ec.o
+obj-y += ec.o
obj-$(CONFIG_ACPI_AC) += ac.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_BUTTON) += button.o
obj-$(CONFIG_ACPI_FAN) += fan.o
obj-$(CONFIG_ACPI_DOCK) += dock.o
obj-$(CONFIG_ACPI_VIDEO) += video.o
+ifdef CONFIG_ACPI_VIDEO
+obj-y += video_detect.o
+endif
+
obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
obj-$(CONFIG_ACPI_CONTAINER) += container.o
obj-$(CONFIG_ACPI_THERMAL) += thermal.o
-obj-$(CONFIG_ACPI_POWER) += power.o
+obj-y += power.o
obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index d72a1b6c8a94..9b917dac7732 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -37,7 +37,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_AC_COMPONENT 0x00020000
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_AC_DEVICE_NAME "AC Adapter"
#define ACPI_AC_FILE_STATE "state"
@@ -242,7 +241,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
acpi_ac_get_state(ac);
acpi_bus_generate_proc_event(device, event, (u32) ac->state);
acpi_bus_generate_netlink_event(device->pnp.device_class,
- device->dev.bus_id, event,
+ dev_name(&device->dev), event,
(u32) ac->state);
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 71d21c51c45f..63a17b55b39b 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -32,7 +32,6 @@
#include <linux/memory_hotplug.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL
#define ACPI_MEMORY_DEVICE_CLASS "memory"
#define ACPI_MEMORY_DEVICE_HID "PNP0C80"
#define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device"
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index b2133e89ad9a..1423b0c0cd2e 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -46,7 +46,6 @@
#define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
-#define ACPI_BATTERY_COMPONENT 0x00040000
#define ACPI_BATTERY_CLASS "battery"
#define ACPI_BATTERY_DEVICE_NAME "Battery"
#define ACPI_BATTERY_NOTIFY_STATUS 0x80
@@ -782,7 +781,7 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data)
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
acpi_bus_generate_netlink_event(device->pnp.device_class,
- device->dev.bus_id, event,
+ dev_name(&device->dev), event,
acpi_battery_present(battery));
#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_batter_update could remove power_supply object */
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index c797c6473f31..7edf6d913c13 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,6 +688,14 @@ void __init acpi_early_init(void)
if (acpi_disabled)
return;
+ /*
+ * ACPI CA initializes acpi_dbg_level to non-zero, which means
+ * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
+ * Turn it off so we don't get output unless the user specifies
+ * acpi.debug_level.
+ */
+ acpi_dbg_level = 0;
+
printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
/* enable workarounds, unless strict ACPI spec. compliance */
@@ -774,7 +782,7 @@ static int __init acpi_bus_init(void)
"Unable to initialize ACPI OS objects\n");
goto error1;
}
-#ifdef CONFIG_ACPI_EC
+
/*
* ACPI 2.0 requires the EC driver to be loaded and work before
* the EC device is found in the namespace (i.e. before acpi_initialize_objects()
@@ -785,7 +793,6 @@ static int __init acpi_bus_init(void)
*/
status = acpi_ec_ecdt_probe();
/* Ignore result. Not having an ECDT is not fatal. */
-#endif
status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index cb046c3fc3f2..171fd914f435 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -33,7 +33,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_BUTTON_COMPONENT 0x00080000
#define ACPI_BUTTON_CLASS "button"
#define ACPI_BUTTON_FILE_INFO "info"
#define ACPI_BUTTON_FILE_STATE "state"
@@ -479,7 +478,7 @@ static int acpi_button_add(struct acpi_device *device)
device->wakeup.gpe_number,
ACPI_GPE_TYPE_WAKE_RUN);
acpi_enable_gpe(device->wakeup.gpe_device,
- device->wakeup.gpe_number, ACPI_NOT_ISR);
+ device->wakeup.gpe_number);
device->wakeup.state.enabled = 1;
}
diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c
index 4441e84b28a9..307963bd1043 100644
--- a/drivers/acpi/cm_sbs.c
+++ b/drivers/acpi/cm_sbs.c
@@ -34,7 +34,6 @@
ACPI_MODULE_NAME("cm_sbs");
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
-#define ACPI_SBS_COMPONENT 0x00080000
#define _COMPONENT ACPI_SBS_COMPONENT
static struct proc_dir_entry *acpi_ac_dir;
static struct proc_dir_entry *acpi_battery_dir;
@@ -105,9 +104,3 @@ void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
return;
}
EXPORT_SYMBOL(acpi_unlock_battery_dir);
-
-static int __init acpi_cm_sbs_init(void)
-{
- return 0;
-}
-subsys_initcall(acpi_cm_sbs_init);
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 134818b265a9..17020c12623c 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -41,7 +41,6 @@
#define INSTALL_NOTIFY_HANDLER 1
#define UNINSTALL_NOTIFY_HANDLER 2
-#define ACPI_CONTAINER_COMPONENT 0x01000000
#define _COMPONENT ACPI_CONTAINER_COMPONENT
ACPI_MODULE_NAME("container");
diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c
index abf36b4b1d1d..c48396892008 100644
--- a/drivers/acpi/debug.c
+++ b/drivers/acpi/debug.c
@@ -44,6 +44,21 @@ static const struct acpi_dlayer acpi_debug_layers[] = {
ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER),
ACPI_DEBUG_INIT(ACPI_COMPILER),
ACPI_DEBUG_INIT(ACPI_TOOLS),
+
+ ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_AC_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
};
static const struct acpi_dlevel acpi_debug_levels[] = {
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index ef42316f89f5..cf41f9fc24a7 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -70,7 +70,7 @@ enum ec_command {
#define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
#define ACPI_EC_UDELAY 100 /* Wait 100us before polling EC again */
-#define ACPI_EC_STORM_THRESHOLD 20 /* number of false interrupts
+#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts
per one transaction */
enum {
@@ -100,8 +100,11 @@ struct transaction {
u8 *rdata;
unsigned short irq_count;
u8 command;
+ u8 wi;
+ u8 ri;
u8 wlen;
u8 rlen;
+ bool done;
};
static struct acpi_ec {
@@ -178,34 +181,45 @@ static int ec_transaction_done(struct acpi_ec *ec)
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&ec->curr_lock, flags);
- if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen))
+ if (!ec->curr || ec->curr->done)
ret = 1;
spin_unlock_irqrestore(&ec->curr_lock, flags);
return ret;
}
+static void start_transaction(struct acpi_ec *ec)
+{
+ ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0;
+ ec->curr->done = false;
+ acpi_ec_write_cmd(ec, ec->curr->command);
+}
+
static void gpe_transaction(struct acpi_ec *ec, u8 status)
{
unsigned long flags;
spin_lock_irqsave(&ec->curr_lock, flags);
if (!ec->curr)
goto unlock;
- if (ec->curr->wlen > 0) {
- if ((status & ACPI_EC_FLAG_IBF) == 0) {
- acpi_ec_write_data(ec, *(ec->curr->wdata++));
- --ec->curr->wlen;
- } else
- /* false interrupt, state didn't change */
- ++ec->curr->irq_count;
-
- } else if (ec->curr->rlen > 0) {
+ if (ec->curr->wlen > ec->curr->wi) {
+ if ((status & ACPI_EC_FLAG_IBF) == 0)
+ acpi_ec_write_data(ec,
+ ec->curr->wdata[ec->curr->wi++]);
+ else
+ goto err;
+ } else if (ec->curr->rlen > ec->curr->ri) {
if ((status & ACPI_EC_FLAG_OBF) == 1) {
- *(ec->curr->rdata++) = acpi_ec_read_data(ec);
- --ec->curr->rlen;
+ ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec);
+ if (ec->curr->rlen == ec->curr->ri)
+ ec->curr->done = true;
} else
- /* false interrupt, state didn't change */
- ++ec->curr->irq_count;
- }
+ goto err;
+ } else if (ec->curr->wlen == ec->curr->wi &&
+ (status & ACPI_EC_FLAG_IBF) == 0)
+ ec->curr->done = true;
+ goto unlock;
+err:
+ /* false interrupt, state didn't change */
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
@@ -215,6 +229,15 @@ static int acpi_ec_wait(struct acpi_ec *ec)
if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
msecs_to_jiffies(ACPI_EC_DELAY)))
return 0;
+ /* try restart command if we get any false interrupts */
+ if (ec->curr->irq_count &&
+ (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
+ pr_debug(PREFIX "controller reset, restart transaction\n");
+ start_transaction(ec);
+ if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
+ msecs_to_jiffies(ACPI_EC_DELAY)))
+ return 0;
+ }
/* missing GPEs, switch back to poll mode */
if (printk_ratelimit())
pr_info(PREFIX "missing confirmations, "
@@ -239,10 +262,10 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state)
static int ec_poll(struct acpi_ec *ec)
{
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
- msleep(1);
+ udelay(ACPI_EC_UDELAY);
while (time_before(jiffies, delay)) {
gpe_transaction(ec, acpi_ec_read_status(ec));
- msleep(1);
+ udelay(ACPI_EC_UDELAY);
if (ec_transaction_done(ec))
return 0;
}
@@ -259,14 +282,13 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
- acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+ acpi_disable_gpe(NULL, ec->gpe);
}
/* start transaction */
spin_lock_irqsave(&ec->curr_lock, tmp);
/* following two actions should be kept atomic */
- t->irq_count = 0;
ec->curr = t;
- acpi_ec_write_cmd(ec, ec->curr->command);
+ start_transaction(ec);
if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
spin_unlock_irqrestore(&ec->curr_lock, tmp);
@@ -283,10 +305,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
/* check if we received SCI during transaction */
ec_check_sci(ec, acpi_ec_read_status(ec));
/* it is safe to enable GPE outside of transaction */
- acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+ acpi_enable_gpe(NULL, ec->gpe);
} else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
t->irq_count > ACPI_EC_STORM_THRESHOLD) {
- pr_debug(PREFIX "GPE storm detected\n");
+ pr_info(PREFIX "GPE storm detected, "
+ "transactions will use polling mode\n");
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
}
return ret;
@@ -558,17 +581,26 @@ static u32 acpi_ec_gpe_handler(void *data)
pr_debug(PREFIX "~~~> interrupt\n");
status = acpi_ec_read_status(ec);
- gpe_transaction(ec, status);
- if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
- wake_up(&ec->wait);
+ if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) {
+ gpe_transaction(ec, status);
+ if (ec_transaction_done(ec) &&
+ (status & ACPI_EC_FLAG_IBF) == 0)
+ wake_up(&ec->wait);
+ }
ec_check_sci(ec, status);
if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
!test_bit(EC_FLAGS_NO_GPE, &ec->flags)) {
/* this is non-query, must be confirmation */
- if (printk_ratelimit())
- pr_info(PREFIX "non-query interrupt received,"
+ if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+ if (printk_ratelimit())
+ pr_info(PREFIX "non-query interrupt received,"
+ " switching to interrupt mode\n");
+ } else {
+ /* hush, STORM switches the mode every transaction */
+ pr_debug(PREFIX "non-query interrupt received,"
" switching to interrupt mode\n");
+ }
set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
return ACPI_INTERRUPT_HANDLED;
@@ -736,7 +768,7 @@ static acpi_status
ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
{
acpi_status status;
- unsigned long long tmp;
+ unsigned long long tmp = 0;
struct acpi_ec *ec = context;
status = acpi_walk_resources(handle, METHOD_NAME__CRS,
@@ -751,6 +783,7 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
return status;
ec->gpe = tmp;
/* Use the global lock for all EC transactions? */
+ tmp = 0;
acpi_evaluate_integer(handle, "_GLK", NULL, &tmp);
ec->global_lock = tmp;
ec->handle = handle;
@@ -868,7 +901,7 @@ static int ec_install_handlers(struct acpi_ec *ec)
if (ACPI_FAILURE(status))
return -ENODEV;
acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
- acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+ acpi_enable_gpe(NULL, ec->gpe);
status = acpi_install_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC,
&acpi_ec_space_handler,
@@ -1007,7 +1040,7 @@ static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state)
/* Stop using GPE */
set_bit(EC_FLAGS_NO_GPE, &ec->flags);
clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
- acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+ acpi_disable_gpe(NULL, ec->gpe);
return 0;
}
@@ -1016,7 +1049,7 @@ static int acpi_ec_resume(struct acpi_device *device)
struct acpi_ec *ec = acpi_driver_data(device);
/* Enable use of GPE back */
clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
- acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+ acpi_enable_gpe(NULL, ec->gpe);
return 0;
}
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index c5e53aae86f7..f45c74fe745e 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -289,8 +289,6 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
*/
status = acpi_hw_low_disable_gpe(gpe_event_info);
return_ACPI_STATUS(status);
-
- return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c
index 73bfd6bf962f..41554f736b68 100644
--- a/drivers/acpi/events/evxfevnt.c
+++ b/drivers/acpi/events/evxfevnt.c
@@ -248,21 +248,15 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type)
* DESCRIPTION: Enable an ACPI event (general purpose)
*
******************************************************************************/
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_OK;
+ acpi_cpu_flags flags;
struct acpi_gpe_event_info *gpe_event_info;
ACPI_FUNCTION_TRACE(acpi_enable_gpe);
- /* Use semaphore lock if not executing at interrupt level */
-
- if (flags & ACPI_NOT_ISR) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
@@ -277,9 +271,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
status = acpi_ev_enable_gpe(gpe_event_info, TRUE);
unlock_and_exit:
- if (flags & ACPI_NOT_ISR) {
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- }
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
@@ -299,22 +291,15 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
* DESCRIPTION: Disable an ACPI event (general purpose)
*
******************************************************************************/
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_OK;
+ acpi_cpu_flags flags;
struct acpi_gpe_event_info *gpe_event_info;
ACPI_FUNCTION_TRACE(acpi_disable_gpe);
- /* Use semaphore lock if not executing at interrupt level */
-
- if (flags & ACPI_NOT_ISR) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
@@ -325,10 +310,8 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
status = acpi_ev_disable_gpe(gpe_event_info);
- unlock_and_exit:
- if (flags & ACPI_NOT_ISR) {
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- }
+unlock_and_exit:
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
@@ -521,6 +504,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status)
if (value)
*event_status |= ACPI_EVENT_FLAG_SET;
+ if (acpi_gbl_fixed_event_handlers[event].handler)
+ *event_status |= ACPI_EVENT_FLAG_HANDLE;
+
return_ACPI_STATUS(status);
}
@@ -571,6 +557,9 @@ acpi_get_gpe_status(acpi_handle gpe_device,
status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
+ if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
+ *event_status |= ACPI_EVENT_FLAG_HANDLE;
+
unlock_and_exit:
if (flags & ACPI_NOT_ISR) {
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 60d54d1f6b19..eaaee1660bdf 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -34,7 +34,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_FAN_COMPONENT 0x00200000
#define ACPI_FAN_CLASS "fan"
#define ACPI_FAN_FILE_STATE "state"
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 24649ada08df..adec3d15810a 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -140,6 +140,46 @@ struct device *acpi_get_physical_device(acpi_handle handle)
EXPORT_SYMBOL(acpi_get_physical_device);
+/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge
+ * This should work in general, but did not on a Lenovo T61 for the
+ * graphics card. But this must be fixed when the PCI device is
+ * bound and the kernel device struct is attached to the acpi device
+ * Note: A success call will increase reference count by one
+ * Do call put_device(dev) on the returned device then
+ */
+struct device *acpi_get_physical_pci_device(acpi_handle handle)
+{
+ struct device *dev;
+ long long device_id;
+ acpi_status status;
+
+ status =
+ acpi_evaluate_integer(handle, "_ADR", NULL, &device_id);
+
+ if (ACPI_FAILURE(status))
+ return NULL;
+
+ /* We need to attempt to determine whether the _ADR refers to a
+ PCI device or not. There's no terribly good way to do this,
+ so the best we can hope for is to assume that there'll never
+ be a device in the host bridge */
+ if (device_id >= 0x10000) {
+ /* It looks like a PCI device. Does it exist? */
+ dev = acpi_get_physical_device(handle);
+ } else {
+ /* It doesn't look like a PCI device. Does its parent
+ exist? */
+ acpi_handle phandle;
+ if (acpi_get_parent(handle, &phandle))
+ return NULL;
+ dev = acpi_get_physical_device(phandle);
+ }
+ if (!dev)
+ return NULL;
+ return dev;
+}
+EXPORT_SYMBOL(acpi_get_physical_pci_device);
+
static int acpi_bind_one(struct device *dev, acpi_handle handle)
{
struct acpi_device *acpi_dev;
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index fcfdef7b4fdd..e52ad91ce2dc 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -531,7 +531,7 @@ int __init acpi_irq_penalty_init(void)
return 0;
}
-static int acpi_irq_balance; /* 0: static, 1: balance */
+static int acpi_irq_balance = -1; /* 0: static, 1: balance */
static int acpi_pci_link_allocate(struct acpi_pci_link *link)
{
@@ -950,10 +950,17 @@ device_initcall(irqrouter_init_sysfs);
static int __init acpi_pci_link_init(void)
{
-
if (acpi_noirq)
return 0;
+ if (acpi_irq_balance == -1) {
+ /* no command line switch: enable balancing in IOAPIC mode */
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+ acpi_irq_balance = 1;
+ else
+ acpi_irq_balance = 0;
+ }
+
acpi_link.count = 0;
INIT_LIST_HEAD(&acpi_link.entries);
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 1b8f67d21d53..642554b1b60c 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -376,15 +376,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type)
static int __init acpi_pci_root_init(void)
{
-
if (acpi_pci_disabled)
return 0;
- /* DEBUG:
- acpi_dbg_layer = ACPI_PCI_COMPONENT;
- acpi_dbg_level = 0xFFFFFFFF;
- */
-
if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0)
return -ENODEV;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index a1718e56103b..bb7d50dd2818 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -44,9 +44,8 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define _COMPONENT ACPI_POWER_COMPONENT
+#define _COMPONENT ACPI_POWER_COMPONENT
ACPI_MODULE_NAME("power");
-#define ACPI_POWER_COMPONENT 0x00800000
#define ACPI_POWER_CLASS "power_resource"
#define ACPI_POWER_DEVICE_NAME "Power Resource"
#define ACPI_POWER_FILE_INFO "info"
@@ -153,7 +152,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state)
ACPI_POWER_RESOURCE_STATE_OFF;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n",
- acpi_ut_get_node_name(handle), state ? "on" : "off"));
+ acpi_ut_get_node_name(handle),
+ *state ? "on" : "off"));
return 0;
}
@@ -516,11 +516,6 @@ int acpi_power_transition(struct acpi_device *device, int state)
cl = &device->power.states[device->power.state].resources;
tl = &device->power.states[state].resources;
- if (!cl->count && !tl->count) {
- result = -ENODEV;
- goto end;
- }
-
/* TBD: Resources must be ordered. */
/*
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 24a362f8034c..34948362f41d 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -59,7 +59,6 @@
#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_DEVICE_NAME "Processor"
#define ACPI_PROCESSOR_FILE_INFO "info"
@@ -89,6 +88,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr);
static const struct acpi_device_id processor_device_ids[] = {
+ {ACPI_PROCESSOR_OBJECT_HID, 0},
{ACPI_PROCESSOR_HID, 0},
{"", 0},
};
@@ -409,7 +409,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device)
/* Use the acpiid in MADT to map cpus in case of SMP */
#ifndef CONFIG_SMP
-static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;}
+static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; }
#else
static struct acpi_table_madt *madt;
@@ -428,27 +428,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry,
}
static int map_lsapic_id(struct acpi_subtable_header *entry,
- u32 acpi_id, int *apic_id)
+ int device_declaration, u32 acpi_id, int *apic_id)
{
struct acpi_madt_local_sapic *lsapic =
(struct acpi_madt_local_sapic *)entry;
+ u32 tmp = (lsapic->id << 8) | lsapic->eid;
+
/* Only check enabled APICs*/
- if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
- /* First check against id */
- if (lsapic->processor_id == acpi_id) {
- *apic_id = (lsapic->id << 8) | lsapic->eid;
- return 1;
- /* Check against optional uid */
- } else if (entry->length >= 16 &&
- lsapic->uid == acpi_id) {
- *apic_id = lsapic->uid;
- return 1;
- }
- }
+ if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
+ return 0;
+
+ /* Device statement declaration type */
+ if (device_declaration) {
+ if (entry->length < 16)
+ printk(KERN_ERR PREFIX
+ "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n",
+ tmp);
+ else if (lsapic->uid == acpi_id)
+ goto found;
+ /* Processor statement declaration type */
+ } else if (lsapic->processor_id == acpi_id)
+ goto found;
+
return 0;
+found:
+ *apic_id = tmp;
+ return 1;
}
-static int map_madt_entry(u32 acpi_id)
+static int map_madt_entry(int type, u32 acpi_id)
{
unsigned long madt_end, entry;
int apic_id = -1;
@@ -469,7 +477,7 @@ static int map_madt_entry(u32 acpi_id)
if (map_lapic_id(header, acpi_id, &apic_id))
break;
} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
- if (map_lsapic_id(header, acpi_id, &apic_id))
+ if (map_lsapic_id(header, type, acpi_id, &apic_id))
break;
}
entry += header->length;
@@ -477,7 +485,7 @@ static int map_madt_entry(u32 acpi_id)
return apic_id;
}
-static int map_mat_entry(acpi_handle handle, u32 acpi_id)
+static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
@@ -500,7 +508,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id)
if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
map_lapic_id(header, acpi_id, &apic_id);
} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
- map_lsapic_id(header, acpi_id, &apic_id);
+ map_lsapic_id(header, type, acpi_id, &apic_id);
}
exit:
@@ -509,14 +517,14 @@ exit:
return apic_id;
}
-static int get_cpu_id(acpi_handle handle, u32 acpi_id)
+static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
{
int i;
int apic_id = -1;
- apic_id = map_mat_entry(handle, acpi_id);
+ apic_id = map_mat_entry(handle, type, acpi_id);
if (apic_id == -1)
- apic_id = map_madt_entry(acpi_id);
+ apic_id = map_madt_entry(type, acpi_id);
if (apic_id == -1)
return apic_id;
@@ -532,15 +540,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id)
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
+static int acpi_processor_get_info(struct acpi_device *device)
{
acpi_status status = 0;
union acpi_object object = { 0 };
struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
- int cpu_index;
+ struct acpi_processor *pr;
+ int cpu_index, device_declaration = 0;
static int cpu0_initialized;
-
+ pr = acpi_driver_data(device);
if (!pr)
return -EINVAL;
@@ -561,22 +570,23 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No bus mastering arbitration control\n"));
- /* Check if it is a Device with HID and UID */
- if (has_uid) {
+ if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
+ /*
+ * Declared with "Device" statement; match _UID.
+ * Note that we don't handle string _UIDs yet.
+ */
unsigned long long value;
status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
NULL, &value);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Evaluating processor _UID\n");
+ printk(KERN_ERR PREFIX
+ "Evaluating processor _UID [%#x]\n", status);
return -ENODEV;
}
+ device_declaration = 1;
pr->acpi_id = value;
} else {
- /*
- * Evalute the processor object. Note that it is common on SMP to
- * have the first (boot) processor with a valid PBLK address while
- * all others have a NULL address.
- */
+ /* Declared with "Processor" statement; match ProcessorID */
status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX "Evaluating processor object\n");
@@ -584,12 +594,13 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
}
/*
- * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
- * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c
- */
+ * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+ * >>> 'acpi_get_processor_id(acpi_id, &id)' in
+ * arch/xxx/acpi.c
+ */
pr->acpi_id = object.processor.proc_id;
}
- cpu_index = get_cpu_id(pr->handle, pr->acpi_id);
+ cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
/* Handle UP system running SMP kernel, with no LAPIC in MADT */
if (!cpu0_initialized && (cpu_index == -1) &&
@@ -661,7 +672,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
pr = acpi_driver_data(device);
- result = acpi_processor_get_info(pr, device->flags.unique_id);
+ result = acpi_processor_get_info(device);
if (result) {
/* Processor is physically not present */
return 0;
@@ -761,20 +772,20 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
acpi_bus_generate_proc_event(device, event,
pr->performance_platform_limit);
acpi_bus_generate_netlink_event(device->pnp.device_class,
- device->dev.bus_id, event,
+ dev_name(&device->dev), event,
pr->performance_platform_limit);
break;
case ACPI_PROCESSOR_NOTIFY_POWER:
acpi_processor_cst_has_changed(pr);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
- device->dev.bus_id, event, 0);
+ dev_name(&device->dev), event, 0);
break;
case ACPI_PROCESSOR_NOTIFY_THROTTLING:
acpi_processor_tstate_has_changed(pr);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
- device->dev.bus_id, event, 0);
+ dev_name(&device->dev), event, 0);
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 81b40ed5379e..5f8d746a9b81 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -59,7 +59,6 @@
#include <acpi/processor.h>
#include <asm/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_idle");
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index dbcf260ea93f..0d7b772bef50 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -44,9 +44,9 @@
#endif
#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_FILE_PERFORMANCE "performance"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index ef34b18f95ca..b1eb376fae45 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -40,7 +40,6 @@
#include <acpi/processor.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_thermal");
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 3da2df93d924..a0c38c94a8a0 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -38,9 +38,9 @@
#include <asm/uaccess.h>
#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_throttling");
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index 755baf2ca70a..a6b662c00b67 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -15,28 +15,9 @@ void acpi_reboot(void)
rr = &acpi_gbl_FADT.reset_register;
- /*
- * Is the ACPI reset register supported?
- *
- * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates
- * whether the ACPI reset mechanism is supported.
- *
- * However, some boxes have this bit clear, yet a valid
- * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only
- * mechanism that works for them after S3.
- *
- * This suggests that other operating systems may not be checking
- * the RESET_REG_SUP bit, and are using other means to decide
- * whether to use the ACPI reboot mechanism or not.
- *
- * So when acpi reboot is requested,
- * only the reset_register is checked. If the following
- * conditions are met, it indicates that the reset register is supported.
- * a. reset_register is not zero
- * b. the access width is eight
- * c. the bit_offset is zero
- */
- if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0)
+ /* Is the reset register supported? */
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+ rr->bit_width != 8 || rr->bit_offset != 0)
return;
reset_value = acpi_gbl_FADT.reset_value;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index a9dda8e0f9f9..bd5253ee5c85 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -109,8 +109,7 @@ static int acpi_bus_hot_remove_device(void *context)
return 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Hot-removing device %s...\n", device->dev.bus_id));
-
+ "Hot-removing device %s...\n", dev_name(&device->dev)));
if (acpi_bus_trim(device, 1)) {
printk(KERN_ERR PREFIX
@@ -460,7 +459,7 @@ static int acpi_device_register(struct acpi_device *device,
acpi_device_bus_id->instance_no = 0;
list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
}
- sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
+ dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
if (device->parent) {
list_add_tail(&device->node, &device->parent->children);
@@ -484,7 +483,8 @@ static int acpi_device_register(struct acpi_device *device,
result = acpi_device_setup_files(device);
if(result)
- printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id);
+ printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n",
+ dev_name(&device->dev));
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
@@ -919,36 +919,6 @@ static void acpi_device_get_busid(struct acpi_device *device,
}
}
-static int
-acpi_video_bus_match(struct acpi_device *device)
-{
- acpi_handle h_dummy;
-
- if (!device)
- return -EINVAL;
-
- /* Since there is no HID, CID for ACPI Video drivers, we have
- * to check well known required nodes for each feature we support.
- */
-
- /* Does this device able to support video switching ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
- return 0;
-
- /* Does this device able to retrieve a video ROM ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
- return 0;
-
- /* Does this device able to configure which video head to be POSTed ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy)))
- return 0;
-
- return -ENODEV;
-}
-
/*
* acpi_bay_match - see if a device is an ejectable driver bay
*
@@ -1031,7 +1001,7 @@ static void acpi_device_set_id(struct acpi_device *device,
will get autoloaded and the device might still match
against another driver.
*/
- if (ACPI_SUCCESS(acpi_video_bus_match(device)))
+ if (acpi_is_video_device(device))
cid_add = ACPI_VIDEO_HID;
else if (ACPI_SUCCESS(acpi_bay_match(device)))
cid_add = ACPI_BAY_HID;
@@ -1043,7 +1013,7 @@ static void acpi_device_set_id(struct acpi_device *device,
hid = ACPI_POWER_HID;
break;
case ACPI_BUS_TYPE_PROCESSOR:
- hid = ACPI_PROCESSOR_HID;
+ hid = ACPI_PROCESSOR_OBJECT_HID;
break;
case ACPI_BUS_TYPE_SYSTEM:
hid = ACPI_SYSTEM_HID;
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 631ee2ee2ca0..64e591ba86f2 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -366,8 +366,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
dev->wakeup.state.enabled ? "enabled" : "disabled");
if (ldev)
seq_printf(seq, "%s:%s",
- ldev->bus ? ldev->bus->name : "no-bus",
- ldev->bus_id);
+ dev_name(ldev) ? ldev->bus->name : "no-bus",
+ dev_name(ldev));
seq_printf(seq, "\n");
put_device(ldev);
diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c
index 38655eb132dc..dea4c23df764 100644
--- a/drivers/acpi/sleep/wakeup.c
+++ b/drivers/acpi/sleep/wakeup.c
@@ -88,7 +88,7 @@ void acpi_enable_wakeup_device(u8 sleep_state)
spin_unlock(&acpi_device_lock);
if (!dev->wakeup.flags.run_wake)
acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number, ACPI_ISR);
+ dev->wakeup.gpe_number);
spin_lock(&acpi_device_lock);
}
spin_unlock(&acpi_device_lock);
@@ -122,7 +122,7 @@ void acpi_disable_wakeup_device(u8 sleep_state)
ACPI_GPE_TYPE_WAKE_RUN);
/* Re-enable it, since set_gpe_type will disable it */
acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number, ACPI_NOT_ISR);
+ dev->wakeup.gpe_number);
spin_lock(&acpi_device_lock);
}
continue;
@@ -133,7 +133,7 @@ void acpi_disable_wakeup_device(u8 sleep_state)
/* Never disable run-wake GPE */
if (!dev->wakeup.flags.run_wake) {
acpi_disable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number, ACPI_NOT_ISR);
+ dev->wakeup.gpe_number);
acpi_clear_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number, ACPI_NOT_ISR);
}
@@ -162,7 +162,7 @@ static int __init acpi_wakeup_device_init(void)
dev->wakeup.gpe_number,
ACPI_GPE_TYPE_WAKE_RUN);
acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number, ACPI_NOT_ISR);
+ dev->wakeup.gpe_number);
dev->wakeup.state.enabled = 1;
spin_lock(&acpi_device_lock);
}
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 1d74171b7940..6e4107f82403 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -78,9 +78,15 @@ static ssize_t acpi_table_show(struct kobject *kobj,
container_of(bin_attr, struct acpi_table_attr, attr);
struct acpi_table_header *table_header = NULL;
acpi_status status;
+ char name[ACPI_NAME_SIZE];
+
+ if (strncmp(table_attr->name, "NULL", 4))
+ memcpy(name, table_attr->name, ACPI_NAME_SIZE);
+ else
+ memcpy(name, "\0\0\0\0", 4);
status =
- acpi_get_table(table_attr->name, table_attr->instance,
+ acpi_get_table(name, table_attr->instance,
&table_header);
if (ACPI_FAILURE(status))
return -ENODEV;
@@ -95,21 +101,24 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
struct acpi_table_header *header = NULL;
struct acpi_table_attr *attr = NULL;
- memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE);
+ if (table_header->signature[0] != '\0')
+ memcpy(table_attr->name, table_header->signature,
+ ACPI_NAME_SIZE);
+ else
+ memcpy(table_attr->name, "NULL", 4);
list_for_each_entry(attr, &acpi_table_attr_list, node) {
- if (!memcmp(table_header->signature, attr->name,
- ACPI_NAME_SIZE))
+ if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE))
if (table_attr->instance < attr->instance)
table_attr->instance = attr->instance;
}
table_attr->instance++;
if (table_attr->instance > 1 || (table_attr->instance == 1 &&
- !acpi_get_table(table_header->
- signature, 2,
- &header)))
- sprintf(table_attr->name + 4, "%d", table_attr->instance);
+ !acpi_get_table
+ (table_header->signature, 2, &header)))
+ sprintf(table_attr->name + ACPI_NAME_SIZE, "%d",
+ table_attr->instance);
table_attr->attr.size = 0;
table_attr->attr.read = acpi_table_show;
@@ -167,7 +176,6 @@ static int acpi_system_sysfs_init(void)
#define COUNT_ERROR 2 /* other */
#define NUM_COUNTERS_EXTRA 3
-#define ACPI_EVENT_VALID 0x01
struct event_counter {
u32 count;
u32 flags;
@@ -312,12 +320,6 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle)
} else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS))
result = acpi_get_event_status(index - num_gpes, status);
- /*
- * sleep/power button GPE/Fixed Event is enabled after acpi_system_init,
- * check the status at runtime and mark it as valid once it's enabled
- */
- if (!result && (*status & ACPI_EVENT_FLAG_ENABLED))
- all_counters[index].flags |= ACPI_EVENT_VALID;
end:
return result;
}
@@ -346,12 +348,14 @@ static ssize_t counter_show(struct kobject *kobj,
if (result)
goto end;
- if (!(all_counters[index].flags & ACPI_EVENT_VALID))
- size += sprintf(buf + size, " invalid");
+ if (!(status & ACPI_EVENT_FLAG_HANDLE))
+ size += sprintf(buf + size, " invalid");
else if (status & ACPI_EVENT_FLAG_ENABLED)
- size += sprintf(buf + size, " enable");
+ size += sprintf(buf + size, " enabled");
+ else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED)
+ size += sprintf(buf + size, " wake_enabled");
else
- size += sprintf(buf + size, " disable");
+ size += sprintf(buf + size, " disabled");
end:
size += sprintf(buf + size, "\n");
@@ -385,7 +389,7 @@ static ssize_t counter_set(struct kobject *kobj,
if (result)
goto end;
- if (!(all_counters[index].flags & ACPI_EVENT_VALID)) {
+ if (!(status & ACPI_EVENT_FLAG_HANDLE)) {
printk(KERN_WARNING PREFIX
"Can not change Invalid GPE/Fixed Event status\n");
return -EINVAL;
@@ -394,10 +398,10 @@ static ssize_t counter_set(struct kobject *kobj,
if (index < num_gpes) {
if (!strcmp(buf, "disable\n") &&
(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR);
+ result = acpi_disable_gpe(handle, index);
else if (!strcmp(buf, "enable\n") &&
!(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR);
+ result = acpi_enable_gpe(handle, index);
else if (!strcmp(buf, "clear\n") &&
(status & ACPI_EVENT_FLAG_SET))
result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR);
diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index 2c7885e7ffba..2817158fb6a1 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -304,7 +304,7 @@ static void acpi_tb_convert_fadt(void)
* The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
* offset 45, 55, 95, and the word located at offset 109, 110.
*/
- if (acpi_gbl_FADT.header.revision < 3) {
+ if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) {
acpi_gbl_FADT.preferred_profile = 0;
acpi_gbl_FADT.pstate_control = 0;
acpi_gbl_FADT.cst_control = 0;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index ad6cae938f0b..073ff09218a9 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -47,7 +47,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_THERMAL_COMPONENT 0x04000000
#define ACPI_THERMAL_CLASS "thermal_zone"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
@@ -576,7 +575,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz)
acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
tz->trips.critical.flags.enabled);
acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
- tz->device->dev.bus_id,
+ dev_name(&tz->device->dev),
ACPI_THERMAL_NOTIFY_CRITICAL,
tz->trips.critical.flags.enabled);
@@ -605,7 +604,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz)
acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
tz->trips.hot.flags.enabled);
acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
- tz->device->dev.bus_id,
+ dev_name(&tz->device->dev),
ACPI_THERMAL_NOTIFY_HOT,
tz->trips.hot.flags.enabled);
@@ -1592,14 +1591,14 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
acpi_thermal_check(tz);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
- device->dev.bus_id, event, 0);
+ dev_name(&device->dev), event, 0);
break;
case ACPI_THERMAL_NOTIFY_DEVICES:
acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
acpi_thermal_check(tz);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
- device->dev.bus_id, event, 0);
+ dev_name(&device->dev), event, 0);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a29b0ccac65a..baa441929720 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -41,7 +41,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_VIDEO_COMPONENT 0x08000000
#define ACPI_VIDEO_CLASS "video"
#define ACPI_VIDEO_BUS_NAME "Video Bus"
#define ACPI_VIDEO_DEVICE_NAME "Video Device"
@@ -739,7 +738,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
device->cap._DSS = 1;
}
- max_level = acpi_video_init_brightness(device);
+ if (acpi_video_backlight_support())
+ max_level = acpi_video_init_brightness(device);
if (device->cap._BCL && device->cap._BCM && max_level > 0) {
int result;
@@ -785,18 +785,21 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
printk(KERN_ERR PREFIX "Create sysfs link\n");
}
- if (device->cap._DCS && device->cap._DSS){
- static int count = 0;
- char *name;
- name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
- if (!name)
- return;
- sprintf(name, "acpi_video%d", count++);
- device->output_dev = video_output_register(name,
- NULL, device, &acpi_output_properties);
- kfree(name);
+
+ if (acpi_video_display_switch_support()) {
+
+ if (device->cap._DCS && device->cap._DSS) {
+ static int count;
+ char *name;
+ name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
+ if (!name)
+ return;
+ sprintf(name, "acpi_video%d", count++);
+ device->output_dev = video_output_register(name,
+ NULL, device, &acpi_output_properties);
+ kfree(name);
+ }
}
- return;
}
/*
@@ -842,11 +845,16 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
static int acpi_video_bus_check(struct acpi_video_bus *video)
{
acpi_status status = -ENOENT;
-
+ struct device *dev;
if (!video)
return -EINVAL;
+ dev = acpi_get_physical_pci_device(video->device->handle);
+ if (!dev)
+ return -ENODEV;
+ put_device(dev);
+
/* Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
*/
@@ -2094,12 +2102,6 @@ static int __init acpi_video_init(void)
{
int result = 0;
-
- /*
- acpi_dbg_level = 0xFFFFFFFF;
- acpi_dbg_layer = 0x08000000;
- */
-
acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
if (!acpi_video_dir)
return -ENODEV;
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
new file mode 100644
index 000000000000..f022eb6f5637
--- /dev/null
+++ b/drivers/acpi/video_detect.c
@@ -0,0 +1,267 @@
+/*
+ * Copyright (C) 2008 SuSE Linux Products GmbH
+ * Thomas Renninger <trenn@suse.de>
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * video_detect.c:
+ * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c
+ * There a Linux specific (Spec does not provide a HID for video devices) is
+ * assinged
+ *
+ * After PCI devices are glued with ACPI devices
+ * acpi_get_physical_pci_device() can be called to identify ACPI graphics
+ * devices for which a real graphics card is plugged in
+ *
+ * Now acpi_video_get_capabilities() can be called to check which
+ * capabilities the graphics cards plugged in support. The check for general
+ * video capabilities will be triggered by the first caller of
+ * acpi_video_get_capabilities(NULL); which will happen when the first
+ * backlight (or display output) switching supporting driver calls:
+ * acpi_video_backlight_support();
+ *
+ * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
+ * are available, video.ko should be used to handle the device.
+ *
+ * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi,
+ * sony_acpi,... can take care about backlight brightness and display output
+ * switching.
+ *
+ * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
+ * this file will not be compiled, acpi_video_get_capabilities() and
+ * acpi_video_backlight_support() will always return 0 and vendor specific
+ * drivers always can handle backlight.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+
+ACPI_MODULE_NAME("video");
+#define _COMPONENT ACPI_VIDEO_COMPONENT
+
+static long acpi_video_support;
+static bool acpi_video_caps_checked;
+
+static acpi_status
+acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context,
+ void **retyurn_value)
+{
+ long *cap = context;
+ acpi_handle h_dummy;
+
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) &&
+ ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight "
+ "support\n"));
+ *cap |= ACPI_VIDEO_BACKLIGHT;
+ /* We have backlight support, no need to scan further */
+ return AE_CTRL_TERMINATE;
+ }
+ return 0;
+}
+
+/* Returns true if the device is a video device which can be handled by
+ * video.ko.
+ * The device will get a Linux specific CID added in scan.c to
+ * identify the device as an ACPI graphics device
+ * Be aware that the graphics device may not be physically present
+ * Use acpi_video_get_capabilities() to detect general ACPI video
+ * capabilities of present cards
+ */
+long acpi_is_video_device(struct acpi_device *device)
+{
+ acpi_handle h_dummy;
+ long video_caps = 0;
+
+ if (!device)
+ return 0;
+
+ /* Does this device able to support video switching ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
+ video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
+
+ /* Does this device able to retrieve a video ROM ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
+ video_caps |= ACPI_VIDEO_ROM_AVAILABLE;
+
+ /* Does this device able to configure which video head to be POSTed ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy)))
+ video_caps |= ACPI_VIDEO_DEVICE_POSTING;
+
+ /* Only check for backlight functionality if one of the above hit. */
+ if (video_caps)
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle,
+ ACPI_UINT32_MAX, acpi_backlight_cap_match,
+ &video_caps, NULL);
+
+ return video_caps;
+}
+EXPORT_SYMBOL(acpi_is_video_device);
+
+static acpi_status
+find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ long *cap = context;
+ struct device *dev;
+ struct acpi_device *acpi_dev;
+
+ const struct acpi_device_id video_ids[] = {
+ {ACPI_VIDEO_HID, 0},
+ {"", 0},
+ };
+ if (acpi_bus_get_device(handle, &acpi_dev))
+ return AE_OK;
+
+ if (!acpi_match_device_ids(acpi_dev, video_ids)) {
+ dev = acpi_get_physical_pci_device(handle);
+ if (!dev)
+ return AE_OK;
+ put_device(dev);
+ *cap |= acpi_is_video_device(acpi_dev);
+ }
+ return AE_OK;
+}
+
+/*
+ * Returns the video capabilities of a specific ACPI graphics device
+ *
+ * if NULL is passed as argument all ACPI devices are enumerated and
+ * all graphics capabilities of physically present devices are
+ * summerized and returned. This is cached and done only once.
+ */
+long acpi_video_get_capabilities(acpi_handle graphics_handle)
+{
+ long caps = 0;
+ struct acpi_device *tmp_dev;
+ acpi_status status;
+
+ if (acpi_video_caps_checked && graphics_handle == NULL)
+ return acpi_video_support;
+
+ if (!graphics_handle) {
+ /* Only do the global walk through all graphics devices once */
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX, find_video,
+ &caps, NULL);
+ /* There might be boot param flags set already... */
+ acpi_video_support |= caps;
+ acpi_video_caps_checked = 1;
+ /* Add blacklists here. Be careful to use the right *DMI* bits
+ * to still be able to override logic via boot params, e.g.:
+ *
+ * if (dmi_name_in_vendors("XY")) {
+ * acpi_video_support |=
+ * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR;
+ * acpi_video_support |=
+ * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
+ *}
+ */
+ } else {
+ status = acpi_bus_get_device(graphics_handle, &tmp_dev);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Invalid device"));
+ return 0;
+ }
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle,
+ ACPI_UINT32_MAX, find_video,
+ &caps, NULL);
+ }
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n",
+ graphics_handle ? caps : acpi_video_support,
+ graphics_handle ? "on device " : "in general",
+ graphics_handle ? acpi_device_bid(tmp_dev) : ""));
+ return caps;
+}
+EXPORT_SYMBOL(acpi_video_get_capabilities);
+
+/* Returns true if video.ko can do backlight switching */
+int acpi_video_backlight_support(void)
+{
+ /*
+ * We must check whether the ACPI graphics device is physically plugged
+ * in. Therefore this must be called after binding PCI and ACPI devices
+ */
+ if (!acpi_video_caps_checked)
+ acpi_video_get_capabilities(NULL);
+
+ /* First check for boot param -> highest prio */
+ if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR)
+ return 0;
+ else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO)
+ return 1;
+
+ /* Then check for DMI blacklist -> second highest prio */
+ if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR)
+ return 0;
+ else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO)
+ return 1;
+
+ /* Then go the default way */
+ return acpi_video_support & ACPI_VIDEO_BACKLIGHT;
+}
+EXPORT_SYMBOL(acpi_video_backlight_support);
+
+/*
+ * Returns true if video.ko can do display output switching.
+ * This does not work well/at all with binary graphics drivers
+ * which disable system io ranges and do it on their own.
+ */
+int acpi_video_display_switch_support(void)
+{
+ if (!acpi_video_caps_checked)
+ acpi_video_get_capabilities(NULL);
+
+ if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR)
+ return 0;
+ else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO)
+ return 1;
+
+ if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR)
+ return 0;
+ else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO)
+ return 1;
+
+ return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING;
+}
+EXPORT_SYMBOL(acpi_video_display_switch_support);
+
+/*
+ * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video
+ * To force that backlight or display output switching is processed by vendor
+ * specific acpi drivers or video.ko driver.
+ */
+int __init acpi_backlight(char *str)
+{
+ if (str == NULL || *str == '\0')
+ return 1;
+ else {
+ if (!strcmp("vendor", str))
+ acpi_video_support |=
+ ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR;
+ if (!strcmp("video", str))
+ acpi_video_support |=
+ ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
+ }
+ return 1;
+}
+__setup("acpi_backlight=", acpi_backlight);
+
+int __init acpi_display_output(char *str)
+{
+ if (str == NULL || *str == '\0')
+ return 1;
+ else {
+ if (!strcmp("vendor", str))
+ acpi_video_support |=
+ ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR;
+ if (!strcmp("video", str))
+ acpi_video_support |=
+ ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
+ }
+ return 1;
+}
+__setup("acpi_display_output=", acpi_display_output);
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index 47cd7baf9b1b..8a8b377712c9 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -660,7 +660,7 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data)
wblock->handler(event, wblock->handler_data);
acpi_bus_generate_netlink_event(
- device->pnp.device_class, device->dev.bus_id,
+ device->pnp.device_class, dev_name(&device->dev),
event, 0);
break;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 622350d9b2e3..4214bfb13bbd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -612,7 +612,7 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
- block |= tf->hob_lbal << 24;
+ block |= (u64)tf->hob_lbal << 24;
} else
block |= (tf->device & 0xf) << 24;
@@ -1712,6 +1712,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
else
tag = 0;
+ if (test_and_set_bit(tag, &ap->qc_allocated))
+ BUG();
qc = __ata_qc_from_tag(ap, tag);
qc->tag = tag;
@@ -4563,6 +4565,37 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
}
/**
+ * ata_qc_new - Request an available ATA command, for queueing
+ * @ap: Port associated with device @dev
+ * @dev: Device from whom we request an available command structure
+ *
+ * LOCKING:
+ * None.
+ */
+
+static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc = NULL;
+ unsigned int i;
+
+ /* no command while frozen */
+ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
+ return NULL;
+
+ /* the last tag is reserved for internal command. */
+ for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
+ if (!test_and_set_bit(i, &ap->qc_allocated)) {
+ qc = __ata_qc_from_tag(ap, i);
+ break;
+ }
+
+ if (qc)
+ qc->tag = i;
+
+ return qc;
+}
+
+/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
* @tag: command tag
@@ -4571,20 +4604,16 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
* None.
*/
-struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
+struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
struct ata_queued_cmd *qc;
- if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
- return NULL;
-
- qc = __ata_qc_from_tag(ap, tag);
+ qc = ata_qc_new(ap);
if (qc) {
qc->scsicmd = NULL;
qc->ap = ap;
qc->dev = dev;
- qc->tag = tag;
ata_qc_reinit(qc);
}
@@ -4592,6 +4621,31 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
return qc;
}
+/**
+ * ata_qc_free - free unused ata_queued_cmd
+ * @qc: Command to complete
+ *
+ * Designed to free unused ata_queued_cmd object
+ * in case something prevents using it.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_qc_free(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int tag;
+
+ WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+
+ qc->flags = 0;
+ tag = qc->tag;
+ if (likely(ata_tag_valid(tag))) {
+ qc->tag = ATA_TAG_POISON;
+ clear_bit(tag, &ap->qc_allocated);
+ }
+}
+
void __ata_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8077bdf5d30d..32da9a93ce44 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -610,9 +610,6 @@ void ata_scsi_error(struct Scsi_Host *host)
if (ata_ncq_enabled(dev))
ehc->saved_ncq_enabled |= 1 << devno;
}
-
- /* set last reset timestamp to some time in the past */
- ehc->last_reset = jiffies - 60 * HZ;
}
ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
@@ -2281,17 +2278,21 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (link->flags & ATA_LFLAG_NO_SRST)
softreset = NULL;
- now = jiffies;
- deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
- if (time_before(now, deadline))
- schedule_timeout_uninterruptible(deadline - now);
+ /* make sure each reset attemp is at least COOL_DOWN apart */
+ if (ehc->i.flags & ATA_EHI_DID_RESET) {
+ now = jiffies;
+ WARN_ON(time_after(ehc->last_reset, now));
+ deadline = ata_deadline(ehc->last_reset,
+ ATA_EH_RESET_COOL_DOWN);
+ if (time_before(now, deadline))
+ schedule_timeout_uninterruptible(deadline - now);
+ }
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_RESETTING;
spin_unlock_irqrestore(ap->lock, flags);
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
- ehc->last_reset = jiffies;
ata_link_for_each_dev(dev, link) {
/* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2379,7 +2380,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
/*
* Perform reset
*/
- ehc->last_reset = jiffies;
if (ata_is_host_link(link))
ata_eh_freeze_port(ap);
@@ -2391,6 +2391,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
reset == softreset ? "soft" : "hard");
/* mark that this EH session started with reset */
+ ehc->last_reset = jiffies;
if (reset == hardreset)
ehc->i.flags |= ATA_EHI_DID_HARDRESET;
else
@@ -2535,7 +2536,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
ata_eh_done(link, NULL, ATA_EH_RESET);
if (slave)
ata_eh_done(slave, NULL, ATA_EH_RESET);
- ehc->last_reset = jiffies;
+ ehc->last_reset = jiffies; /* update to completion time */
ehc->i.action |= ATA_EH_REVALIDATE;
rc = 0;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3fa75eac135d..47c7afcb36f2 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -709,11 +709,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
{
struct ata_queued_cmd *qc;
- if (cmd->request->tag != -1)
- qc = ata_qc_new_init(dev, cmd->request->tag);
- else
- qc = ata_qc_new_init(dev, 0);
-
+ qc = ata_qc_new_init(dev);
if (qc) {
qc->scsicmd = cmd;
qc->scsidone = done;
@@ -1108,17 +1104,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
depth = min(ATA_MAX_QUEUE - 1, depth);
-
- /*
- * If this device is behind a port multiplier, we have
- * to share the tag map between all devices on that PMP.
- * Set up the shared tag map here and we get automatic.
- */
- if (dev->link->ap->pmp_link)
- scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1);
-
- scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
- scsi_activate_tcq(sdev, depth);
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
}
return 0;
@@ -1958,11 +1944,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
hdr[1] |= (1 << 7);
memcpy(rbuf, hdr, sizeof(hdr));
-
- /* if ncq, set tags supported */
- if (ata_id_has_ncq(args->id))
- rbuf[7] |= (1 << 1);
-
memcpy(&rbuf[8], "ATA ", 8);
ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index d3831d39bdaa..fe2839e58774 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
extern void ata_force_cbl(struct ata_port *ap);
extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
-extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
+extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
@@ -103,6 +103,7 @@ extern int ata_dev_configure(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_link *link);
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
+extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
extern int atapi_check_dma(struct ata_queued_cmd *qc);
@@ -118,22 +119,6 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
-/**
- * ata_qc_free - free unused ata_queued_cmd
- * @qc: Command to complete
- *
- * Designed to free unused ata_queued_cmd object
- * in case something prevents using it.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-static inline void ata_qc_free(struct ata_queued_cmd *qc)
-{
- qc->flags = 0;
- qc->tag = ATA_TAG_POISON;
-}
-
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
extern void ata_acpi_associate_sata_port(struct ata_port *ap);
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 1b2d4a0f5f74..8b236af84c2e 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -72,7 +72,6 @@
/**
* cs5535_cable_detect - detect cable type
* @ap: Port to detect on
- * @deadline: deadline jiffies for the operation
*
* Perform cable detection for ATA66 capable cable. Return a libata
* cable type.
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 73f8332cb679..afed92976198 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
/**
* cs5536_cable_detect - detect cable type
* @ap: Port to detect on
- * @deadline: deadline jiffies for the operation
*
* Perform cable detection for ATA66 capable cable. Return a libata
* cable type.
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 271cb64d429e..64b2e2281ee7 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -416,6 +416,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+ PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
PCMCIA_DEVICE_NULL,
};
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index c8cc027789fe..6aeeeeb34124 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -83,7 +83,7 @@ static struct ata_port_operations sch_pata_ops = {
};
static struct ata_port_info sch_port_info = {
- .flags = 0,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4, /* pio0-4 */
.mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 4023885353e0..12de1fdaa6c6 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -96,6 +96,8 @@ static const struct pci_device_id cciss_pci_device_id[] = {
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
@@ -133,6 +135,8 @@ static struct board_type products[] = {
{0x3245103C, "Smart Array P410i", &SA5_access},
{0x3247103C, "Smart Array P411", &SA5_access},
{0x3249103C, "Smart Array P812", &SA5_access},
+ {0x324A103C, "Smart Array P712m", &SA5_access},
+ {0x324B103C, "Smart Array P711m", &SA5_access},
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
@@ -1366,6 +1370,7 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
disk->first_minor = drv_index << NWD_SHIFT;
disk->fops = &cciss_fops;
disk->private_data = &h->drv[drv_index];
+ disk->driverfs_dev = &h->pdev->dev;
/* Set up queue information */
blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
@@ -3404,7 +3409,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
int i;
int j = 0;
int rc;
- int dac;
+ int dac, return_code;
+ InquiryData_struct *inq_buff = NULL;
i = alloc_cciss_hba();
if (i < 0)
@@ -3510,6 +3516,25 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
/* Turn the interrupts on so we can service requests */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
+ /* Get the firmware version */
+ inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ if (inq_buff == NULL) {
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto clean4;
+ }
+
+ return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
+ sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD);
+ if (return_code == IO_OK) {
+ hba[i]->firm_ver[0] = inq_buff->data_byte[32];
+ hba[i]->firm_ver[1] = inq_buff->data_byte[33];
+ hba[i]->firm_ver[2] = inq_buff->data_byte[34];
+ hba[i]->firm_ver[3] = inq_buff->data_byte[35];
+ } else { /* send command failed */
+ printk(KERN_WARNING "cciss: unable to determine firmware"
+ " version of controller\n");
+ }
+
cciss_procinit(i);
hba[i]->cciss_max_sectors = 2048;
@@ -3520,6 +3545,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
return 1;
clean4:
+ kfree(inq_buff);
#ifdef CONFIG_CISS_SCSI_TAPE
kfree(hba[i]->scsi_rejects.complete);
#endif
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 47d233c6d0b3..5d39df14ed90 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -567,7 +567,12 @@ static int __init cpqarray_init(void)
num_cntlrs_reg++;
}
- return(num_cntlrs_reg);
+ if (num_cntlrs_reg)
+ return 0;
+ else {
+ pci_unregister_driver(&cpqarray_pci_driver);
+ return -ENODEV;
+ }
}
/* Function to find the first free pointer into our hba[] array */
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 8a59aaa21be5..7a88dfd4427b 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -422,9 +422,11 @@ struct ipmi_smi {
/**
* The driver model view of the IPMI messaging driver.
*/
-static struct device_driver ipmidriver = {
- .name = "ipmi",
- .bus = &platform_bus_type
+static struct platform_driver ipmidriver = {
+ .driver = {
+ .name = "ipmi",
+ .bus = &platform_bus_type
+ }
};
static DEFINE_MUTEX(ipmidriver_mutex);
@@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
* representing the interfaced BMC already
*/
if (bmc->guid_set)
- old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid);
+ old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid);
else
- old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver,
+ old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver,
bmc->id.product_id,
bmc->id.device_id);
@@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
snprintf(name, sizeof(name),
"ipmi_bmc.%4.4x", bmc->id.product_id);
- while (ipmi_find_bmc_prod_dev_id(&ipmidriver,
+ while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver,
bmc->id.product_id,
bmc->id.device_id)) {
if (!warn_printed) {
@@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
" Unable to allocate platform device\n");
return -ENOMEM;
}
- bmc->dev->dev.driver = &ipmidriver;
+ bmc->dev->dev.driver = &ipmidriver.driver;
dev_set_drvdata(&bmc->dev->dev, bmc);
kref_init(&bmc->refcount);
@@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void)
if (initialized)
return 0;
- rv = driver_register(&ipmidriver);
+ rv = driver_register(&ipmidriver.driver);
if (rv) {
printk(KERN_ERR PFX "Could not register IPMI driver\n");
return rv;
@@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void)
remove_proc_entry(proc_ipmi_root->name, NULL);
#endif /* CONFIG_PROC_FS */
- driver_unregister(&ipmidriver);
+ driver_unregister(&ipmidriver.driver);
initialized = 0;
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 3123bf57ad91..3000135f2ead 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" };
#define DEVICE_NAME "ipmi_si"
-static struct device_driver ipmi_driver = {
- .name = DEVICE_NAME,
- .bus = &platform_bus_type
+static struct platform_driver ipmi_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .bus = &platform_bus_type
+ }
};
@@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi)
goto out_err;
}
new_smi->dev = &new_smi->pdev->dev;
- new_smi->dev->driver = &ipmi_driver;
+ new_smi->dev->driver = &ipmi_driver.driver;
rv = platform_device_add(new_smi->pdev);
if (rv) {
@@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void)
initialized = 1;
/* Register the device drivers. */
- rv = driver_register(&ipmi_driver);
+ rv = driver_register(&ipmi_driver.driver);
if (rv) {
printk(KERN_ERR
"init_ipmi_si: Unable to register driver: %d\n",
@@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void)
#ifdef CONFIG_PPC_OF
of_unregister_platform_driver(&ipmi_of_platform_driver);
#endif
- driver_unregister(&ipmi_driver);
+ driver_unregister(&ipmi_driver.driver);
printk(KERN_WARNING
"ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
@@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void)
cleanup_one_si(e);
mutex_unlock(&smi_infos_lock);
- driver_unregister(&ipmi_driver);
+ driver_unregister(&ipmi_driver.driver);
}
module_exit(cleanup_ipmi_si);
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 7d30ee1d3fca..04e4549299ba 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -7,12 +7,14 @@
* Original driver code supplied by Multi-Tech
*
* Changes
- * 1/9/98 alan@redhat.com Merge to 2.0.x kernel tree
+ * 1/9/98 alan@lxorguk.ukuu.org.uk
+ * Merge to 2.0.x kernel tree
* Obtain and use official major/minors
* Loader switched to a misc device
* (fixed range check bug as a side effect)
* Printk clean up
- * 9/12/98 alan@redhat.com Rough port to 2.1.x
+ * 9/12/98 alan@lxorguk.ukuu.org.uk
+ * Rough port to 2.1.x
*
* 10/6/99 sameer Merged the ISA and PCI drivers to
* a new unified driver.
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 8beef50f95a0..047766915411 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -14,7 +14,8 @@
* (at your option) any later version.
*
* Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
- * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
+ * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
+ * www.moxa.com.
* - Fixed x86_64 cleanness
*/
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 2457b07dabd6..f4374437a033 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -523,7 +523,7 @@ static int acpi_driver_registered;
static int sonypi_ec_write(u8 addr, u8 value)
{
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
if (SONYPI_ACPI_ACTIVE)
return ec_write(addr, value);
#endif
@@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value)
static int sonypi_ec_read(u8 addr, u8 *value)
{
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
if (SONYPI_ACPI_ACTIVE)
return ec_read(addr, value);
#endif
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index d8f83e26e4a4..a5af6072e2b3 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -1644,7 +1644,10 @@ static void reset_terminal(struct vc_data *vc, int do_clear)
vc->vc_tab_stop[1] =
vc->vc_tab_stop[2] =
vc->vc_tab_stop[3] =
- vc->vc_tab_stop[4] = 0x01010101;
+ vc->vc_tab_stop[4] =
+ vc->vc_tab_stop[5] =
+ vc->vc_tab_stop[6] =
+ vc->vc_tab_stop[7] = 0x01010101;
vc->vc_bell_pitch = DEFAULT_BELL_PITCH;
vc->vc_bell_duration = DEFAULT_BELL_DURATION;
@@ -1935,7 +1938,10 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
vc->vc_tab_stop[1] =
vc->vc_tab_stop[2] =
vc->vc_tab_stop[3] =
- vc->vc_tab_stop[4] = 0;
+ vc->vc_tab_stop[4] =
+ vc->vc_tab_stop[5] =
+ vc->vc_tab_stop[6] =
+ vc->vc_tab_stop[7] = 0;
}
return;
case 'm':
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 5bed73329ef8..8504a2108557 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -65,12 +65,14 @@ static void cpuidle_idle_call(void)
return;
}
+#if 0
+ /* shows regressions, re-enable for 2.6.29 */
/*
* run any timers that can be run now, at this point
* before calculating the idle duration etc.
*/
hrtimer_peek_ahead_timers();
-
+#endif
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
if (need_resched())
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index ec249d2db633..d883e1b8bb8c 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -270,6 +270,6 @@ static void __exit dca_exit(void)
dca_sysfs_exit();
}
-module_init(dca_init);
+subsys_initcall(dca_init);
module_exit(dca_exit);
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index dc003a3a787d..5317e08221ec 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -399,8 +399,8 @@ int dma_async_device_register(struct dma_device *device)
chan->chan_id = chancnt++;
chan->dev.class = &dma_devclass;
chan->dev.parent = device->dev;
- snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d",
- device->dev_id, chan->chan_id);
+ dev_set_name(&chan->dev, "dma%dchan%d",
+ device->dev_id, chan->chan_id);
rc = device_register(&chan->dev);
if (rc) {
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index d1e381e35a9e..ed9636bfb54a 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -20,11 +20,11 @@ static unsigned int test_buf_size = 16384;
module_param(test_buf_size, uint, S_IRUGO);
MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer");
-static char test_channel[BUS_ID_SIZE];
+static char test_channel[20];
module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO);
MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)");
-static char test_device[BUS_ID_SIZE];
+static char test_device[20];
module_param_string(device, test_device, sizeof(test_device), S_IRUGO);
MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)");
@@ -80,14 +80,14 @@ static bool dmatest_match_channel(struct dma_chan *chan)
{
if (test_channel[0] == '\0')
return true;
- return strcmp(chan->dev.bus_id, test_channel) == 0;
+ return strcmp(dev_name(&chan->dev), test_channel) == 0;
}
static bool dmatest_match_device(struct dma_device *device)
{
if (test_device[0] == '\0')
return true;
- return strcmp(device->dev->bus_id, test_device) == 0;
+ return strcmp(dev_name(device->dev), test_device) == 0;
}
static unsigned long dmatest_random(void)
@@ -332,7 +332,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan)
dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL);
if (!dtc) {
- pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id);
+ pr_warning("dmatest: No memory for %s\n", dev_name(&chan->dev));
return DMA_NAK;
}
@@ -343,16 +343,16 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan)
thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL);
if (!thread) {
pr_warning("dmatest: No memory for %s-test%u\n",
- chan->dev.bus_id, i);
+ dev_name(&chan->dev), i);
break;
}
thread->chan = dtc->chan;
smp_wmb();
thread->task = kthread_run(dmatest_func, thread, "%s-test%u",
- chan->dev.bus_id, i);
+ dev_name(&chan->dev), i);
if (IS_ERR(thread->task)) {
pr_warning("dmatest: Failed to run thread %s-test%u\n",
- chan->dev.bus_id, i);
+ dev_name(&chan->dev), i);
kfree(thread);
break;
}
@@ -362,7 +362,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan)
list_add_tail(&thread->node, &dtc->threads);
}
- pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id);
+ pr_info("dmatest: Started %u threads using %s\n", i, dev_name(&chan->dev));
list_add_tail(&dtc->node, &dmatest_channels);
nr_channels++;
@@ -379,7 +379,7 @@ static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan)
list_del(&dtc->node);
dmatest_cleanup_channel(dtc);
pr_debug("dmatest: lost channel %s\n",
- chan->dev.bus_id);
+ dev_name(&chan->dev));
return DMA_ACK;
}
}
@@ -418,7 +418,7 @@ dmatest_event(struct dma_client *client, struct dma_chan *chan,
default:
pr_info("dmatest: Unhandled event %u (%s)\n",
- state, chan->dev.bus_id);
+ state, dev_name(&chan->dev));
break;
}
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index b0438c4f0c30..ecd743f7cc61 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -525,7 +525,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
}
hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- if (new->async_tx.callback) {
+ if (first->async_tx.callback) {
hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
if (first != new) {
/* move callback into to last desc */
@@ -617,7 +617,7 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx)
}
hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- if (new->async_tx.callback) {
+ if (first->async_tx.callback) {
hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
if (first != new) {
/* move callback into to last desc */
@@ -807,6 +807,12 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan)
struct ioat_desc_sw *desc, *_desc;
int in_use_descs = 0;
+ /* Before freeing channel resources first check
+ * if they have been previously allocated for this channel.
+ */
+ if (ioat_chan->desccount == 0)
+ return;
+
tasklet_disable(&ioat_chan->cleanup_task);
ioat_dma_memcpy_cleanup(ioat_chan);
@@ -869,6 +875,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan)
ioat_chan->last_completion = ioat_chan->completion_addr = 0;
ioat_chan->pending = 0;
ioat_chan->dmacount = 0;
+ ioat_chan->desccount = 0;
ioat_chan->watchdog_completion = 0;
ioat_chan->last_compl_desc_addr_hw = 0;
ioat_chan->watchdog_tcp_cookie =
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 71fba82462cb..c7a9306d951d 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -411,6 +411,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx)
int slot_cnt;
int slots_per_op;
dma_cookie_t cookie;
+ dma_addr_t next_dma;
grp_start = sw_desc->group_head;
slot_cnt = grp_start->slot_cnt;
@@ -425,12 +426,12 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx)
&old_chain_tail->chain_node);
/* fix up the hardware chain */
- iop_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys);
+ next_dma = grp_start->async_tx.phys;
+ iop_desc_set_next_desc(old_chain_tail, next_dma);
+ BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */
- /* 1/ don't add pre-chained descriptors
- * 2/ dummy read to flush next_desc write
- */
- BUG_ON(iop_desc_get_next_desc(sw_desc));
+ /* check for pre-chained descriptors */
+ iop_paranoia(iop_desc_get_next_desc(sw_desc));
/* increment the pending count by the number of slots
* memcpy operations have a 1:1 (slot:operation) relation
diff --git a/drivers/dma/iovlock.c b/drivers/dma/iovlock.c
index e763d723e4cf..9f6fe46a9b87 100644
--- a/drivers/dma/iovlock.c
+++ b/drivers/dma/iovlock.c
@@ -55,7 +55,6 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
int nr_iovecs = 0;
int iovec_len_used = 0;
int iovec_pages_used = 0;
- long err;
/* don't pin down non-user-based iovecs */
if (segment_eq(get_fs(), KERNEL_DS))
@@ -72,23 +71,21 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
local_list = kmalloc(sizeof(*local_list)
+ (nr_iovecs * sizeof (struct dma_page_list))
+ (iovec_pages_used * sizeof (struct page*)), GFP_KERNEL);
- if (!local_list) {
- err = -ENOMEM;
+ if (!local_list)
goto out;
- }
/* list of pages starts right after the page list array */
pages = (struct page **) &local_list->page_list[nr_iovecs];
+ local_list->nr_iovecs = 0;
+
for (i = 0; i < nr_iovecs; i++) {
struct dma_page_list *page_list = &local_list->page_list[i];
len -= iov[i].iov_len;
- if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) {
- err = -EFAULT;
+ if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len))
goto unpin;
- }
page_list->nr_pages = num_pages_spanned(&iov[i]);
page_list->base_address = iov[i].iov_base;
@@ -109,10 +106,8 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
NULL);
up_read(&current->mm->mmap_sem);
- if (ret != page_list->nr_pages) {
- err = -ENOMEM;
+ if (ret != page_list->nr_pages)
goto unpin;
- }
local_list->nr_iovecs = i + 1;
}
@@ -122,7 +117,7 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
unpin:
dma_unpin_iovec_pages(local_list);
out:
- return ERR_PTR(err);
+ return NULL;
}
void dma_unpin_iovec_pages(struct dma_pinned_list *pinned_list)
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index f0d9b415db50..d335086f4a26 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1381,6 +1381,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx)
if (mci == NULL)
return -ENOMEM;
+ kobject_get(&mci->edac_mci_kobj);
debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
mci->dev = &pdev->dev; /* record ptr to the generic device */
@@ -1453,6 +1454,7 @@ fail1:
i5000_put_devices(mci);
fail0:
+ kobject_put(&mci->edac_mci_kobj);
edac_mc_free(mci);
return -ENODEV;
}
@@ -1498,7 +1500,7 @@ static void __devexit i5000_remove_one(struct pci_dev *pdev)
/* retrieve references to resources, and free those resources */
i5000_put_devices(mci);
-
+ kobject_put(&mci->edac_mci_kobj);
edac_mc_free(mci);
}
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index 3fccdd484100..6b9be42c7b98 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -587,8 +587,7 @@ static void create_units(struct fw_device *device)
unit->device.bus = &fw_bus_type;
unit->device.type = &fw_unit_type;
unit->device.parent = &device->device;
- snprintf(unit->device.bus_id, sizeof(unit->device.bus_id),
- "%s.%d", device->device.bus_id, i++);
+ dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++);
init_fw_attribute_group(&unit->device,
fw_unit_attributes,
@@ -711,8 +710,7 @@ static void fw_device_init(struct work_struct *work)
device->device.type = &fw_device_type;
device->device.parent = device->card->device;
device->device.devt = MKDEV(fw_cdev_major, minor);
- snprintf(device->device.bus_id, sizeof(device->device.bus_id),
- "fw%d", minor);
+ dev_set_name(&device->device, "fw%d", minor);
init_fw_attribute_group(&device->device,
fw_device_attributes,
@@ -741,13 +739,13 @@ static void fw_device_init(struct work_struct *work)
if (device->config_rom_retries)
fw_notify("created device %s: GUID %08x%08x, S%d00, "
"%d config ROM retries\n",
- device->device.bus_id,
+ dev_name(&device->device),
device->config_rom[3], device->config_rom[4],
1 << device->max_speed,
device->config_rom_retries);
else
fw_notify("created device %s: GUID %08x%08x, S%d00\n",
- device->device.bus_id,
+ dev_name(&device->device),
device->config_rom[3], device->config_rom[4],
1 << device->max_speed);
device->config_rom_retries = 0;
@@ -883,12 +881,12 @@ static void fw_device_refresh(struct work_struct *work)
FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
goto gone;
- fw_notify("refreshed device %s\n", device->device.bus_id);
+ fw_notify("refreshed device %s\n", dev_name(&device->device));
device->config_rom_retries = 0;
goto out;
give_up:
- fw_notify("giving up on refresh of device %s\n", device->device.bus_id);
+ fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
gone:
atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
fw_device_shutdown(work);
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 8e16bfbdcb3d..46610b090415 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -2468,7 +2468,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
goto fail_self_id;
fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n",
- dev->dev.bus_id, version >> 16, version & 0xff);
+ dev_name(&dev->dev), version >> 16, version & 0xff);
return 0;
fail_self_id:
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index d334cac5e1fc..97df6dac3a82 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -1135,7 +1135,7 @@ static int sbp2_probe(struct device *dev)
tgt->unit = unit;
kref_init(&tgt->kref);
INIT_LIST_HEAD(&tgt->lu_list);
- tgt->bus_id = unit->device.bus_id;
+ tgt->bus_id = dev_name(&unit->device);
tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
if (fw_device_enable_phys_dma(device) < 0)
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 3e526b6d00cb..8daf4793ac32 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -81,9 +81,9 @@ static void dmi_table(u8 *buf, int len, int num,
const struct dmi_header *dm = (const struct dmi_header *)data;
/*
- * We want to know the total length (formated area and strings)
- * before decoding to make sure we won't run off the table in
- * dmi_decode or dmi_string
+ * We want to know the total length (formatted area and
+ * strings) before decoding to make sure we won't run off the
+ * table in dmi_decode or dmi_string
*/
data += dm->length;
while ((data - buf < len - 1) && (data[0] || data[1]))
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 7f2ee27fe76b..48f49d93d249 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -65,6 +65,14 @@ config GPIO_SYSFS
# put expanders in the right section, in alphabetical order
+comment "Memory mapped GPIO expanders:"
+
+config GPIO_XILINX
+ bool "Xilinx GPIO support"
+ depends on PPC_OF
+ help
+ Say yes here to support the Xilinx FPGA GPIO device
+
comment "I2C GPIO expanders:"
config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 6aafdeb9ad03..49ac64e515e6 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
+obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
new file mode 100644
index 000000000000..3c1177abebd3
--- /dev/null
+++ b/drivers/gpio/xilinx_gpio.c
@@ -0,0 +1,235 @@
+/*
+ * Xilinx gpio driver
+ *
+ * Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+/* Register Offset Definitions */
+#define XGPIO_DATA_OFFSET (0x0) /* Data register */
+#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
+
+struct xgpio_instance {
+ struct of_mm_gpio_chip mmchip;
+ u32 gpio_state; /* GPIO state shadow register */
+ u32 gpio_dir; /* GPIO direction shadow register */
+ spinlock_t gpio_lock; /* Lock used for synchronization */
+};
+
+/**
+ * xgpio_get - Read the specified signal of the GPIO device.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ *
+ * This function reads the specified signal of the GPIO device. It returns 0 if
+ * the signal clear, 1 if signal is set or negative value on error.
+ */
+static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+ return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1;
+}
+
+/**
+ * xgpio_set - Write the specified signal of the GPIO device.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ * @val: Value to be written to specified signal.
+ *
+ * This function writes the specified value in to the specified signal of the
+ * GPIO device.
+ */
+static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ unsigned long flags;
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct xgpio_instance *chip =
+ container_of(mm_gc, struct xgpio_instance, mmchip);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* Write to GPIO signal and set its direction to output */
+ if (val)
+ chip->gpio_state |= 1 << gpio;
+ else
+ chip->gpio_state &= ~(1 << gpio);
+ out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+/**
+ * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ *
+ * This function sets the direction of specified GPIO signal as input.
+ * It returns 0 if direction of GPIO signals is set as input otherwise it
+ * returns negative error value.
+ */
+static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ unsigned long flags;
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct xgpio_instance *chip =
+ container_of(mm_gc, struct xgpio_instance, mmchip);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* Set the GPIO bit in shadow register and set direction as input */
+ chip->gpio_dir |= (1 << gpio);
+ out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ return 0;
+}
+
+/**
+ * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ * @val: Value to be written to specified signal.
+ *
+ * This function sets the direction of specified GPIO signal as output. If all
+ * GPIO signals of GPIO chip is configured as input then it returns
+ * error otherwise it returns 0.
+ */
+static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ unsigned long flags;
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct xgpio_instance *chip =
+ container_of(mm_gc, struct xgpio_instance, mmchip);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* Write state of GPIO signal */
+ if (val)
+ chip->gpio_state |= 1 << gpio;
+ else
+ chip->gpio_state &= ~(1 << gpio);
+ out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+
+ /* Clear the GPIO bit in shadow register and set direction as output */
+ chip->gpio_dir &= (~(1 << gpio));
+ out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ return 0;
+}
+
+/**
+ * xgpio_save_regs - Set initial values of GPIO pins
+ * @mm_gc: pointer to memory mapped GPIO chip structure
+ */
+static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct xgpio_instance *chip =
+ container_of(mm_gc, struct xgpio_instance, mmchip);
+
+ out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+ out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+}
+
+/**
+ * xgpio_of_probe - Probe method for the GPIO device.
+ * @np: pointer to device tree node
+ *
+ * This function probes the GPIO device in the device tree. It initializes the
+ * driver data structure. It returns 0, if the driver is bound to the GPIO
+ * device, or a negative value if there is an error.
+ */
+static int __devinit xgpio_of_probe(struct device_node *np)
+{
+ struct xgpio_instance *chip;
+ struct of_gpio_chip *ofchip;
+ int status = 0;
+ const u32 *tree_info;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+ ofchip = &chip->mmchip.of_gc;
+
+ /* Update GPIO state shadow register with default value */
+ tree_info = of_get_property(np, "xlnx,dout-default", NULL);
+ if (tree_info)
+ chip->gpio_state = *tree_info;
+
+ /* Update GPIO direction shadow register with default value */
+ chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */
+ tree_info = of_get_property(np, "xlnx,tri-default", NULL);
+ if (tree_info)
+ chip->gpio_dir = *tree_info;
+
+ /* Check device node and parent device node for device width */
+ ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */
+ tree_info = of_get_property(np, "xlnx,gpio-width", NULL);
+ if (!tree_info)
+ tree_info = of_get_property(np->parent,
+ "xlnx,gpio-width", NULL);
+ if (tree_info)
+ ofchip->gc.ngpio = *tree_info;
+
+ spin_lock_init(&chip->gpio_lock);
+
+ ofchip->gpio_cells = 2;
+ ofchip->gc.direction_input = xgpio_dir_in;
+ ofchip->gc.direction_output = xgpio_dir_out;
+ ofchip->gc.get = xgpio_get;
+ ofchip->gc.set = xgpio_set;
+
+ chip->mmchip.save_regs = xgpio_save_regs;
+
+ /* Call the OF gpio helper to setup and register the GPIO device */
+ status = of_mm_gpiochip_add(np, &chip->mmchip);
+ if (status) {
+ kfree(chip);
+ pr_err("%s: error in probe function with status %d\n",
+ np->full_name, status);
+ return status;
+ }
+ pr_info("XGpio: %s: registered\n", np->full_name);
+ return 0;
+}
+
+static struct of_device_id xgpio_of_match[] __devinitdata = {
+ { .compatible = "xlnx,xps-gpio-1.00.a", },
+ { /* end of list */ },
+};
+
+static int __init xgpio_init(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, xgpio_of_match)
+ xgpio_of_probe(np);
+
+ return 0;
+}
+
+/* Make sure we get initialized before anyone else tries to use us */
+subsys_initcall(xgpio_init);
+/* No exit call at the moment as we cannot unregister of GPIO chips */
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 96f416afc3f6..3ab1e9cc4692 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -266,11 +266,19 @@ int drm_init(struct drm_driver *driver)
for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) {
pid = (struct pci_device_id *)&driver->pci_driver.id_table[i];
+ /* Loop around setting up a DRM device for each PCI device
+ * matching our ID and device class. If we had the internal
+ * function that pci_get_subsys and pci_get_class used, we'd
+ * be able to just pass pid in instead of doing a two-stage
+ * thing.
+ */
pdev = NULL;
- /* pass back in pdev to account for multiple identical cards */
while ((pdev =
pci_get_subsys(pid->vendor, pid->device, pid->subvendor,
pid->subdevice, pdev)) != NULL) {
+ if ((pdev->class & pid->class_mask) != pid->class)
+ continue;
+
/* stealth mode requires a manual probe */
pci_dev_get(pdev);
drm_get_dev(pdev, pid, driver);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 212a94f715b2..15c8dabc3e97 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -280,8 +280,6 @@ int drm_irq_uninstall(struct drm_device * dev)
drm_vblank_cleanup(dev);
- dev->locked_tasklet_func = NULL;
-
return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);
@@ -699,81 +697,3 @@ void drm_handle_vblank(struct drm_device *dev, int crtc)
drm_vbl_send_signals(dev, crtc);
}
EXPORT_SYMBOL(drm_handle_vblank);
-
-/**
- * Tasklet wrapper function.
- *
- * \param data DRM device in disguise.
- *
- * Attempts to grab the HW lock and calls the driver callback on success. On
- * failure, leave the lock marked as contended so the callback can be called
- * from drm_unlock().
- */
-static void drm_locked_tasklet_func(unsigned long data)
-{
- struct drm_device *dev = (struct drm_device *)data;
- unsigned long irqflags;
- void (*tasklet_func)(struct drm_device *);
-
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
- tasklet_func = dev->locked_tasklet_func;
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
- if (!tasklet_func ||
- !drm_lock_take(&dev->lock,
- DRM_KERNEL_CONTEXT)) {
- return;
- }
-
- dev->lock.lock_time = jiffies;
- atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
-
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
- tasklet_func = dev->locked_tasklet_func;
- dev->locked_tasklet_func = NULL;
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
- if (tasklet_func != NULL)
- tasklet_func(dev);
-
- drm_lock_free(&dev->lock,
- DRM_KERNEL_CONTEXT);
-}
-
-/**
- * Schedule a tasklet to call back a driver hook with the HW lock held.
- *
- * \param dev DRM device.
- * \param func Driver callback.
- *
- * This is intended for triggering actions that require the HW lock from an
- * interrupt handler. The lock will be grabbed ASAP after the interrupt handler
- * completes. Note that the callback may be called from interrupt or process
- * context, it must not make any assumptions about this. Also, the HW lock will
- * be held with the kernel context or any client context.
- */
-void drm_locked_tasklet(struct drm_device *dev, void (*func)(struct drm_device *))
-{
- unsigned long irqflags;
- static DECLARE_TASKLET(drm_tasklet, drm_locked_tasklet_func, 0);
-
- if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ) ||
- test_bit(TASKLET_STATE_SCHED, &drm_tasklet.state))
- return;
-
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-
- if (dev->locked_tasklet_func) {
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
- return;
- }
-
- dev->locked_tasklet_func = func;
-
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
- drm_tasklet.data = (unsigned long)dev;
-
- tasklet_hi_schedule(&drm_tasklet);
-}
-EXPORT_SYMBOL(drm_locked_tasklet);
diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index 888159e03d26..1cfa72031f8f 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -154,8 +154,6 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
struct drm_lock *lock = data;
- unsigned long irqflags;
- void (*tasklet_func)(struct drm_device *);
if (lock->context == DRM_KERNEL_CONTEXT) {
DRM_ERROR("Process %d using kernel context %d\n",
@@ -163,13 +161,6 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
return -EINVAL;
}
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
- tasklet_func = dev->locked_tasklet_func;
- dev->locked_tasklet_func = NULL;
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
- if (tasklet_func != NULL)
- tasklet_func(dev);
-
atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]);
/* kernel_context_switch isn't used by any of the x86 drm
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 141e33004a76..66c96ec66672 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -92,7 +92,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev,
spin_lock_init(&dev->count_lock);
spin_lock_init(&dev->drw_lock);
- spin_lock_init(&dev->tasklet_lock);
spin_lock_init(&dev->lock.spinlock);
init_timer(&dev->timer);
mutex_init(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 256e22963ae4..0d215e38606a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -154,6 +154,9 @@ static int i915_dma_cleanup(struct drm_device * dev)
if (I915_NEED_GFX_HWS(dev))
i915_free_hws(dev);
+ dev_priv->sarea = NULL;
+ dev_priv->sarea_priv = NULL;
+
return 0;
}
@@ -442,7 +445,7 @@ static void i915_emit_breadcrumb(struct drm_device *dev)
BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
- OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT);
+ OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(0);
ADVANCE_LP_RING();
@@ -573,7 +576,7 @@ static int i915_dispatch_flip(struct drm_device * dev)
BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
- OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT);
+ OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(0);
ADVANCE_LP_RING();
@@ -608,7 +611,6 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 *hw_status = dev_priv->hw_status_page;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
dev_priv->sarea_priv;
drm_i915_batchbuffer_t *batch = data;
@@ -634,7 +636,7 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
mutex_unlock(&dev->struct_mutex);
if (sarea_priv)
- sarea_priv->last_dispatch = (int)hw_status[5];
+ sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
return ret;
}
@@ -642,7 +644,6 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 *hw_status = dev_priv->hw_status_page;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
dev_priv->sarea_priv;
drm_i915_cmdbuffer_t *cmdbuf = data;
@@ -670,7 +671,7 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
}
if (sarea_priv)
- sarea_priv->last_dispatch = (int)hw_status[5];
+ sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
return 0;
}
@@ -849,8 +850,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
* be lost or delayed
*/
if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev))
- if (pci_enable_msi(dev->pdev))
- DRM_ERROR("failed to enable MSI\n");
+ pci_enable_msi(dev->pdev);
intel_opregion_init(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 572dcd0e3e0d..ef1c0b8f8d07 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -88,13 +88,6 @@ struct mem_block {
struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
};
-typedef struct _drm_i915_vbl_swap {
- struct list_head head;
- drm_drawable_t drw_id;
- unsigned int pipe;
- unsigned int sequence;
-} drm_i915_vbl_swap_t;
-
struct opregion_header;
struct opregion_acpi;
struct opregion_swsci;
@@ -146,10 +139,6 @@ typedef struct drm_i915_private {
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
- spinlock_t swaps_lock;
- drm_i915_vbl_swap_t vbl_swaps;
- unsigned int swaps_pending;
-
struct intel_opregion opregion;
/* Register state */
@@ -157,6 +146,7 @@ typedef struct drm_i915_private {
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
u32 saveDSPARB;
+ u32 saveRENDERSTANDBY;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
@@ -241,9 +231,6 @@ typedef struct drm_i915_private {
u8 saveDACDATA[256*3]; /* 256 3-byte colors */
u8 saveCR[37];
- /** Work task for vblank-related ring access */
- struct work_struct vblank_work;
-
struct {
struct drm_mm gtt_space;
@@ -444,7 +431,6 @@ extern int i915_irq_wait(struct drm_device *dev, void *data,
void i915_user_irq_get(struct drm_device *dev);
void i915_user_irq_put(struct drm_device *dev);
-extern void i915_vblank_work_handler(struct work_struct *work);
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
extern void i915_driver_irq_preinstall(struct drm_device * dev);
extern int i915_driver_irq_postinstall(struct drm_device *dev);
@@ -622,8 +608,9 @@ static inline void opregion_enable_asle(struct drm_device *dev) { return; }
* The area from dword 0x20 to 0x3ff is available for driver usage.
*/
#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg])
-#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, 5)
+#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX)
#define I915_GEM_HWS_INDEX 0x20
+#define I915_BREADCRUMB_INDEX 0x21
extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index b0ec73fa6a93..6b4a2bd20640 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1455,11 +1455,9 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj,
read_domains, write_domain);
/* Wait on any GPU rendering to the object to be flushed. */
- if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) {
- ret = i915_gem_object_wait_rendering(obj);
- if (ret)
- return ret;
- }
+ ret = i915_gem_object_wait_rendering(obj);
+ if (ret)
+ return ret;
if (obj_priv->page_cpu_valid == NULL) {
obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 26f48932a51e..82752d6177a4 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -80,211 +80,6 @@ i915_pipe_enabled(struct drm_device *dev, int pipe)
return 0;
}
-/**
- * Emit blits for scheduled buffer swaps.
- *
- * This function will be called with the HW lock held.
- * Because this function must grab the ring mutex (dev->struct_mutex),
- * it can no longer run at soft irq time. We'll fix this when we do
- * the DRI2 swap buffer work.
- */
-static void i915_vblank_tasklet(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long irqflags;
- struct list_head *list, *tmp, hits, *hit;
- int nhits, nrects, slice[2], upper[2], lower[2], i;
- unsigned counter[2];
- struct drm_drawable_info *drw;
- drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
- u32 cpp = dev_priv->cpp;
- u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
- XY_SRC_COPY_BLT_WRITE_ALPHA |
- XY_SRC_COPY_BLT_WRITE_RGB)
- : XY_SRC_COPY_BLT_CMD;
- u32 src_pitch = sarea_priv->pitch * cpp;
- u32 dst_pitch = sarea_priv->pitch * cpp;
- u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
- RING_LOCALS;
-
- mutex_lock(&dev->struct_mutex);
-
- if (IS_I965G(dev) && sarea_priv->front_tiled) {
- cmd |= XY_SRC_COPY_BLT_DST_TILED;
- dst_pitch >>= 2;
- }
- if (IS_I965G(dev) && sarea_priv->back_tiled) {
- cmd |= XY_SRC_COPY_BLT_SRC_TILED;
- src_pitch >>= 2;
- }
-
- counter[0] = drm_vblank_count(dev, 0);
- counter[1] = drm_vblank_count(dev, 1);
-
- DRM_DEBUG("\n");
-
- INIT_LIST_HEAD(&hits);
-
- nhits = nrects = 0;
-
- spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
-
- /* Find buffer swaps scheduled for this vertical blank */
- list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
- drm_i915_vbl_swap_t *vbl_swap =
- list_entry(list, drm_i915_vbl_swap_t, head);
- int pipe = vbl_swap->pipe;
-
- if ((counter[pipe] - vbl_swap->sequence) > (1<<23))
- continue;
-
- list_del(list);
- dev_priv->swaps_pending--;
- drm_vblank_put(dev, pipe);
-
- spin_unlock(&dev_priv->swaps_lock);
- spin_lock(&dev->drw_lock);
-
- drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
-
- list_for_each(hit, &hits) {
- drm_i915_vbl_swap_t *swap_cmp =
- list_entry(hit, drm_i915_vbl_swap_t, head);
- struct drm_drawable_info *drw_cmp =
- drm_get_drawable_info(dev, swap_cmp->drw_id);
-
- /* Make sure both drawables are still
- * around and have some rectangles before
- * we look inside to order them for the
- * blts below.
- */
- if (drw_cmp && drw_cmp->num_rects > 0 &&
- drw && drw->num_rects > 0 &&
- drw_cmp->rects[0].y1 > drw->rects[0].y1) {
- list_add_tail(list, hit);
- break;
- }
- }
-
- spin_unlock(&dev->drw_lock);
-
- /* List of hits was empty, or we reached the end of it */
- if (hit == &hits)
- list_add_tail(list, hits.prev);
-
- nhits++;
-
- spin_lock(&dev_priv->swaps_lock);
- }
-
- if (nhits == 0) {
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
- mutex_unlock(&dev->struct_mutex);
- return;
- }
-
- spin_unlock(&dev_priv->swaps_lock);
-
- i915_kernel_lost_context(dev);
-
- if (IS_I965G(dev)) {
- BEGIN_LP_RING(4);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
- OUT_RING(0);
- OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16));
- OUT_RING(0);
- ADVANCE_LP_RING();
- } else {
- BEGIN_LP_RING(6);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(sarea_priv->width | sarea_priv->height << 16);
- OUT_RING(sarea_priv->width | sarea_priv->height << 16);
- OUT_RING(0);
-
- ADVANCE_LP_RING();
- }
-
- sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
-
- upper[0] = upper[1] = 0;
- slice[0] = max(sarea_priv->pipeA_h / nhits, 1);
- slice[1] = max(sarea_priv->pipeB_h / nhits, 1);
- lower[0] = sarea_priv->pipeA_y + slice[0];
- lower[1] = sarea_priv->pipeB_y + slice[0];
-
- spin_lock(&dev->drw_lock);
-
- /* Emit blits for buffer swaps, partitioning both outputs into as many
- * slices as there are buffer swaps scheduled in order to avoid tearing
- * (based on the assumption that a single buffer swap would always
- * complete before scanout starts).
- */
- for (i = 0; i++ < nhits;
- upper[0] = lower[0], lower[0] += slice[0],
- upper[1] = lower[1], lower[1] += slice[1]) {
- if (i == nhits)
- lower[0] = lower[1] = sarea_priv->height;
-
- list_for_each(hit, &hits) {
- drm_i915_vbl_swap_t *swap_hit =
- list_entry(hit, drm_i915_vbl_swap_t, head);
- struct drm_clip_rect *rect;
- int num_rects, pipe;
- unsigned short top, bottom;
-
- drw = drm_get_drawable_info(dev, swap_hit->drw_id);
-
- /* The drawable may have been destroyed since
- * the vblank swap was queued
- */
- if (!drw)
- continue;
-
- rect = drw->rects;
- pipe = swap_hit->pipe;
- top = upper[pipe];
- bottom = lower[pipe];
-
- for (num_rects = drw->num_rects; num_rects--; rect++) {
- int y1 = max(rect->y1, top);
- int y2 = min(rect->y2, bottom);
-
- if (y1 >= y2)
- continue;
-
- BEGIN_LP_RING(8);
-
- OUT_RING(cmd);
- OUT_RING(ropcpp | dst_pitch);
- OUT_RING((y1 << 16) | rect->x1);
- OUT_RING((y2 << 16) | rect->x2);
- OUT_RING(sarea_priv->front_offset);
- OUT_RING((y1 << 16) | rect->x1);
- OUT_RING(src_pitch);
- OUT_RING(sarea_priv->back_offset);
-
- ADVANCE_LP_RING();
- }
- }
- }
-
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- mutex_unlock(&dev->struct_mutex);
-
- list_for_each_safe(hit, tmp, &hits) {
- drm_i915_vbl_swap_t *swap_hit =
- list_entry(hit, drm_i915_vbl_swap_t, head);
-
- list_del(hit);
-
- drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER);
- }
-}
-
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
@@ -322,40 +117,6 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
return count;
}
-void
-i915_vblank_work_handler(struct work_struct *work)
-{
- drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
- vblank_work);
- struct drm_device *dev = dev_priv->dev;
- unsigned long irqflags;
-
- if (dev->lock.hw_lock == NULL) {
- i915_vblank_tasklet(dev);
- return;
- }
-
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
- dev->locked_tasklet_func = i915_vblank_tasklet;
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
- /* Try to get the lock now, if this fails, the lock
- * holder will execute the tasklet during unlock
- */
- if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT))
- return;
-
- dev->lock.lock_time = jiffies;
- atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
-
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
- dev->locked_tasklet_func = NULL;
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
- i915_vblank_tasklet(dev);
- drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT);
-}
-
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -433,9 +194,6 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
if (iir & I915_ASLE_INTERRUPT)
opregion_asle_intr(dev);
- if (vblank && dev_priv->swaps_pending > 0)
- schedule_work(&dev_priv->vblank_work);
-
return IRQ_HANDLED;
}
@@ -454,12 +212,10 @@ static int i915_emit_irq(struct drm_device * dev)
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->last_enqueue = dev_priv->counter;
- BEGIN_LP_RING(6);
+ BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
- OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT);
+ OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
- OUT_RING(0);
- OUT_RING(0);
OUT_RING(MI_USER_INTERRUPT);
ADVANCE_LP_RING();
@@ -696,123 +452,21 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data,
int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
- drm_i915_vblank_swap_t *swap = data;
- drm_i915_vbl_swap_t *vbl_swap, *vbl_old;
- unsigned int pipe, seqtype, curseq;
- unsigned long irqflags;
- struct list_head *list;
- int ret;
-
- if (!dev_priv || !dev_priv->sarea_priv) {
- DRM_ERROR("%s called with no initialization\n", __func__);
- return -EINVAL;
- }
-
- if (dev_priv->sarea_priv->rotation) {
- DRM_DEBUG("Rotation not supported\n");
- return -EINVAL;
- }
-
- if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE |
- _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) {
- DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype);
- return -EINVAL;
- }
-
- pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
-
- seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
-
- if (!(dev_priv->vblank_pipe & (1 << pipe))) {
- DRM_ERROR("Invalid pipe %d\n", pipe);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&dev->drw_lock, irqflags);
-
- if (!drm_get_drawable_info(dev, swap->drawable)) {
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable);
- return -EINVAL;
- }
-
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
-
- /*
- * We take the ref here and put it when the swap actually completes
- * in the tasklet.
+ /* The delayed swap mechanism was fundamentally racy, and has been
+ * removed. The model was that the client requested a delayed flip/swap
+ * from the kernel, then waited for vblank before continuing to perform
+ * rendering. The problem was that the kernel might wake the client
+ * up before it dispatched the vblank swap (since the lock has to be
+ * held while touching the ringbuffer), in which case the client would
+ * clear and start the next frame before the swap occurred, and
+ * flicker would occur in addition to likely missing the vblank.
+ *
+ * In the absence of this ioctl, userland falls back to a correct path
+ * of waiting for a vblank, then dispatching the swap on its own.
+ * Context switching to userland and back is plenty fast enough for
+ * meeting the requirements of vblank swapping.
*/
- ret = drm_vblank_get(dev, pipe);
- if (ret)
- return ret;
- curseq = drm_vblank_count(dev, pipe);
-
- if (seqtype == _DRM_VBLANK_RELATIVE)
- swap->sequence += curseq;
-
- if ((curseq - swap->sequence) <= (1<<23)) {
- if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) {
- swap->sequence = curseq + 1;
- } else {
- DRM_DEBUG("Missed target sequence\n");
- drm_vblank_put(dev, pipe);
- return -EINVAL;
- }
- }
-
- vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER);
-
- if (!vbl_swap) {
- DRM_ERROR("Failed to allocate memory to queue swap\n");
- drm_vblank_put(dev, pipe);
- return -ENOMEM;
- }
-
- vbl_swap->drw_id = swap->drawable;
- vbl_swap->pipe = pipe;
- vbl_swap->sequence = swap->sequence;
-
- spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
-
- list_for_each(list, &dev_priv->vbl_swaps.head) {
- vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
-
- if (vbl_old->drw_id == swap->drawable &&
- vbl_old->pipe == pipe &&
- vbl_old->sequence == swap->sequence) {
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
- drm_vblank_put(dev, pipe);
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
- DRM_DEBUG("Already scheduled\n");
- return 0;
- }
- }
-
- if (dev_priv->swaps_pending >= 10) {
- DRM_DEBUG("Too many swaps queued\n");
- DRM_DEBUG(" pipe 0: %d pipe 1: %d\n",
- drm_vblank_count(dev, 0),
- drm_vblank_count(dev, 1));
-
- list_for_each(list, &dev_priv->vbl_swaps.head) {
- vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
- DRM_DEBUG("\tdrw %x pipe %d seq %x\n",
- vbl_old->drw_id, vbl_old->pipe,
- vbl_old->sequence);
- }
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
- drm_vblank_put(dev, pipe);
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
- return -EBUSY;
- }
-
- list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head);
- dev_priv->swaps_pending++;
-
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-
- return 0;
+ return -EINVAL;
}
/* drm_dma.h hooks
@@ -831,11 +485,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret, num_pipes = 2;
- spin_lock_init(&dev_priv->swaps_lock);
- INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
- INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler);
- dev_priv->swaps_pending = 0;
-
/* Set initial unmasked IRQs to just the selected vblank pipes. */
dev_priv->irq_mask_reg = ~0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5c2d9f206d05..0e476eba36e6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -527,6 +527,9 @@
#define C0DRB3 0x10206
#define C1DRB3 0x10606
+/** GM965 GM45 render standby register */
+#define MCHBAR_RENDER_STANDBY 0x111B8
+
/*
* Overlay regs
*/
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 603fe742ccd4..5ddc6e595c0c 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -240,6 +240,10 @@ int i915_save_state(struct drm_device *dev)
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
@@ -365,6 +369,11 @@ int i915_restore_state(struct drm_device *dev)
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+
+ /* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
/* Pipe & plane A info */
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 073894824e6b..abdc1ae38467 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -1751,6 +1751,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags)
else
dev_priv->flags |= RADEON_IS_PCI;
+ ret = drm_addmap(dev, drm_get_resource_start(dev, 2),
+ drm_get_resource_len(dev, 2), _DRM_REGISTERS,
+ _DRM_READ_ONLY | _DRM_DRIVER, &dev_priv->mmio);
+ if (ret != 0)
+ return ret;
+
DRM_DEBUG("%s card detected\n",
((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
return ret;
@@ -1767,12 +1773,6 @@ int radeon_driver_firstopen(struct drm_device *dev)
dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE;
- ret = drm_addmap(dev, drm_get_resource_start(dev, 2),
- drm_get_resource_len(dev, 2), _DRM_REGISTERS,
- _DRM_READ_ONLY, &dev_priv->mmio);
- if (ret != 0)
- return ret;
-
dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0);
ret = drm_addmap(dev, dev_priv->fb_aper_offset,
drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER,
@@ -1788,6 +1788,9 @@ int radeon_driver_unload(struct drm_device *dev)
drm_radeon_private_t *dev_priv = dev->dev_private;
DRM_DEBUG("\n");
+
+ drm_rmmap(dev, dev_priv->mmio);
+
drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
dev->dev_private = NULL;
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 02f5575ba395..7a183789be97 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -287,7 +287,6 @@ typedef struct drm_radeon_private {
unsigned long gart_textures_offset;
drm_local_map_t *sarea;
- drm_local_map_t *mmio;
drm_local_map_t *cp_ring;
drm_local_map_t *ring_rptr;
drm_local_map_t *gart_textures;
@@ -318,6 +317,7 @@ typedef struct drm_radeon_private {
int num_gb_pipes;
int track_flush;
+ drm_local_map_t *mmio;
} drm_radeon_private_t;
typedef struct drm_radeon_buf_priv {
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 1903e7515650..d3671b4049c0 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1265,6 +1265,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 5cc404291736..f05bcbbbb0d5 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -253,6 +253,9 @@
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
+#define USB_VENDOR_ID_KWORLD 0x1b80
+#define USB_DEVICE_ID_KWORLD_RADIO_FM700 0xd700
+
#define USB_VENDOR_ID_LABTEC 0x1020
#define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6de1e0ffd391..c709e821f04b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -159,6 +159,16 @@ config SENSORS_ADM9240
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_ADT7462
+ tristate "Analog Devices ADT7462"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7462 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7462.
+
config SENSORS_ADT7470
tristate "Analog Devices ADT7470"
depends on I2C && EXPERIMENTAL
@@ -825,6 +835,25 @@ config SENSORS_HDAPS
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
+config SENSORS_LIS3LV02D
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ depends on ACPI && INPUT
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer. In
+ particular, it can be found in a number of HP laptops, which have the
+ "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+ systems the driver should load automatically (via ACPI). The
+ accelerometer might also be found in other systems, connected via SPI
+ or I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ This driver can also be built as a module. If so, the module
+ will be called lis3lv02d.
+
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on INPUT && X86
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 042d5a78622e..58fc5be5355d 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
+obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
@@ -48,6 +49,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
+obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
obj-$(CONFIG_SENSORS_LM70) += lm70.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
new file mode 100644
index 000000000000..66107b4dc12a
--- /dev/null
+++ b/drivers/hwmon/adt7462.c
@@ -0,0 +1,2002 @@
+/*
+ * A hwmon driver for the Analog Devices ADT7462
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(adt7462);
+
+/* ADT7462 registers */
+#define ADT7462_REG_DEVICE 0x3D
+#define ADT7462_REG_VENDOR 0x3E
+#define ADT7462_REG_REVISION 0x3F
+
+#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44
+#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47
+#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48
+#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B
+#define ADT7462_REG_TEMP_BASE_ADDR 0x88
+#define ADT7462_REG_TEMP_MAX_ADDR 0x8F
+
+#define ADT7462_REG_FAN_BASE_ADDR 0x98
+#define ADT7462_REG_FAN_MAX_ADDR 0x9F
+#define ADT7462_REG_FAN2_BASE_ADDR 0xA2
+#define ADT7462_REG_FAN2_MAX_ADDR 0xA9
+#define ADT7462_REG_FAN_ENABLE 0x07
+#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78
+#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F
+
+#define ADT7462_REG_CFG2 0x02
+#define ADT7462_FSPD_MASK 0x20
+
+#define ADT7462_REG_PWM_BASE_ADDR 0xAA
+#define ADT7462_REG_PWM_MAX_ADDR 0xAD
+#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28
+#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B
+#define ADT7462_REG_PWM_MAX 0x2C
+#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C
+#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F
+#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60
+#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63
+#define ADT7462_PWM_HYST_MASK 0x0F
+#define ADT7462_PWM_RANGE_MASK 0xF0
+#define ADT7462_PWM_RANGE_SHIFT 4
+#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21
+#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24
+#define ADT7462_PWM_CHANNEL_MASK 0xE0
+#define ADT7462_PWM_CHANNEL_SHIFT 5
+
+#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10
+#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13
+#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */
+#define ADT7462_DIODE3_INPUT 0x20
+#define ADT7462_DIODE1_INPUT 0x40
+#define ADT7462_VID_INPUT 0x80
+#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */
+#define ADT7462_PIN21_INPUT 0x08
+#define ADT7462_PIN19_INPUT 0x10
+#define ADT7462_PIN15_INPUT 0x20
+#define ADT7462_PIN13_INPUT 0x40
+#define ADT7462_PIN8_INPUT 0x80
+#define ADT7462_PIN23_MASK 0x03
+#define ADT7462_PIN23_SHIFT 0
+#define ADT7462_PIN26_MASK 0x0C /* cfg2 */
+#define ADT7462_PIN26_SHIFT 2
+#define ADT7462_PIN25_MASK 0x30
+#define ADT7462_PIN25_SHIFT 4
+#define ADT7462_PIN24_MASK 0xC0
+#define ADT7462_PIN24_SHIFT 6
+#define ADT7462_PIN26_VOLT_INPUT 0x08
+#define ADT7462_PIN25_VOLT_INPUT 0x20
+#define ADT7462_PIN28_SHIFT 6 /* cfg3 */
+#define ADT7462_PIN28_VOLT 0x5
+
+#define ADT7462_REG_ALARM1 0xB8
+#define ADT7462_LT_ALARM 0x02
+#define ADT7462_R1T_ALARM 0x04
+#define ADT7462_R2T_ALARM 0x08
+#define ADT7462_R3T_ALARM 0x10
+#define ADT7462_REG_ALARM2 0xBB
+#define ADT7462_V0_ALARM 0x01
+#define ADT7462_V1_ALARM 0x02
+#define ADT7462_V2_ALARM 0x04
+#define ADT7462_V3_ALARM 0x08
+#define ADT7462_V4_ALARM 0x10
+#define ADT7462_V5_ALARM 0x20
+#define ADT7462_V6_ALARM 0x40
+#define ADT7462_V7_ALARM 0x80
+#define ADT7462_REG_ALARM3 0xBC
+#define ADT7462_V8_ALARM 0x08
+#define ADT7462_V9_ALARM 0x10
+#define ADT7462_V10_ALARM 0x20
+#define ADT7462_V11_ALARM 0x40
+#define ADT7462_V12_ALARM 0x80
+#define ADT7462_REG_ALARM4 0xBD
+#define ADT7462_F0_ALARM 0x01
+#define ADT7462_F1_ALARM 0x02
+#define ADT7462_F2_ALARM 0x04
+#define ADT7462_F3_ALARM 0x08
+#define ADT7462_F4_ALARM 0x10
+#define ADT7462_F5_ALARM 0x20
+#define ADT7462_F6_ALARM 0x40
+#define ADT7462_F7_ALARM 0x80
+#define ADT7462_ALARM1 0x0000
+#define ADT7462_ALARM2 0x0100
+#define ADT7462_ALARM3 0x0200
+#define ADT7462_ALARM4 0x0300
+#define ADT7462_ALARM_REG_SHIFT 8
+#define ADT7462_ALARM_FLAG_MASK 0x0F
+
+#define ADT7462_TEMP_COUNT 4
+#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2))
+#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x))
+#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x))
+#define TEMP_FRAC_OFFSET 6
+
+#define ADT7462_FAN_COUNT 8
+#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x))
+
+#define ADT7462_PWM_COUNT 4
+#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_TMIN(x) \
+ (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_TRANGE(x) \
+ (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x))
+
+#define ADT7462_PIN_CFG_REG_COUNT 4
+#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x))
+
+#define ADT7462_ALARM_REG_COUNT 4
+
+/*
+ * The chip can measure 13 different voltage sources:
+ *
+ * 1. +12V1 (pin 7)
+ * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23)
+ * 3. +12V3 (pin 22)
+ * 4. +5V (pin 21)
+ * 5. +1.25V/+0.9V (pin 19)
+ * 6. +2.5V/+1.8V (pin 15)
+ * 7. +3.3v (pin 13)
+ * 8. +12V2 (pin 8)
+ * 9. Vbatt/FSB_Vtt (pin 26)
+ * A. +3.3V/+1.2V1 (pin 25)
+ * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24)
+ * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V)
+ * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V)
+ *
+ * Each of these 13 has a factor to convert raw to voltage. Even better,
+ * the pins can be connected to other sensors (tach/gpio/hot/etc), which
+ * makes the bookkeeping tricky.
+ *
+ * Some, but not all, of these voltages have low/high limits.
+ */
+#define ADT7462_VOLT_COUNT 12
+
+#define ADT7462_VENDOR 0x41
+#define ADT7462_DEVICE 0x62
+/* datasheet only mentions a revision 4 */
+#define ADT7462_REVISION 0x04
+
+/* How often do we reread sensors values? (In jiffies) */
+#define SENSOR_REFRESH_INTERVAL (2 * HZ)
+
+/* How often do we reread sensor limit values? (In jiffies) */
+#define LIMIT_REFRESH_INTERVAL (60 * HZ)
+
+/* datasheet says to divide this number by the fan reading to get fan rpm */
+#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x))
+#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM
+#define FAN_PERIOD_INVALID 65535
+#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
+
+#define MASK_AND_SHIFT(value, prefix) \
+ (((value) & prefix##_MASK) >> prefix##_SHIFT)
+
+#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))
+
+struct adt7462_data {
+ struct device *hwmon_dev;
+ struct attribute_group attrs;
+ struct mutex lock;
+ char sensors_valid;
+ char limits_valid;
+ unsigned long sensors_last_updated; /* In jiffies */
+ unsigned long limits_last_updated; /* In jiffies */
+
+ u8 temp[ADT7462_TEMP_COUNT];
+ /* bits 6-7 are quarter pieces of temp */
+ u8 temp_frac[ADT7462_TEMP_COUNT];
+ u8 temp_min[ADT7462_TEMP_COUNT];
+ u8 temp_max[ADT7462_TEMP_COUNT];
+ u16 fan[ADT7462_FAN_COUNT];
+ u8 fan_enabled;
+ u8 fan_min[ADT7462_FAN_COUNT];
+ u8 cfg2;
+ u8 pwm[ADT7462_PWM_COUNT];
+ u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT];
+ u8 voltages[ADT7462_VOLT_COUNT];
+ u8 volt_max[ADT7462_VOLT_COUNT];
+ u8 volt_min[ADT7462_VOLT_COUNT];
+ u8 pwm_min[ADT7462_PWM_COUNT];
+ u8 pwm_tmin[ADT7462_PWM_COUNT];
+ u8 pwm_trange[ADT7462_PWM_COUNT];
+ u8 pwm_max; /* only one per chip */
+ u8 pwm_cfg[ADT7462_PWM_COUNT];
+ u8 alarms[ADT7462_ALARM_REG_COUNT];
+};
+
+static int adt7462_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adt7462_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int adt7462_remove(struct i2c_client *client);
+
+static const struct i2c_device_id adt7462_id[] = {
+ { "adt7462", adt7462 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7462_id);
+
+static struct i2c_driver adt7462_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "adt7462",
+ },
+ .probe = adt7462_probe,
+ .remove = adt7462_remove,
+ .id_table = adt7462_id,
+ .detect = adt7462_detect,
+ .address_data = &addr_data,
+};
+
+/*
+ * 16-bit registers on the ADT7462 are low-byte first. The data sheet says
+ * that the low byte must be read before the high byte.
+ */
+static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg)
+{
+ u16 foo;
+ foo = i2c_smbus_read_byte_data(client, reg);
+ foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
+ return foo;
+}
+
+/* For some reason these registers are not contiguous. */
+static int ADT7462_REG_FAN(int fan)
+{
+ if (fan < 4)
+ return ADT7462_REG_FAN_BASE_ADDR + (2 * fan);
+ return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4));
+}
+
+/* Voltage registers are scattered everywhere */
+static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which)
+{
+ switch (which) {
+ case 0:
+ if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+ return 0x7C;
+ break;
+ case 1:
+ return 0x69;
+ case 2:
+ if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+ return 0x7F;
+ break;
+ case 3:
+ if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+ return 0x7E;
+ break;
+ case 4:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
+ return 0x4B;
+ break;
+ case 5:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
+ return 0x49;
+ break;
+ case 6:
+ if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+ return 0x68;
+ break;
+ case 7:
+ if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+ return 0x7D;
+ break;
+ case 8:
+ if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
+ return 0x6C;
+ break;
+ case 9:
+ if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
+ return 0x6B;
+ break;
+ case 10:
+ return 0x6A;
+ case 11:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return 0x50;
+ break;
+ case 12:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return 0x4C;
+ break;
+ }
+ return -ENODEV;
+}
+
+static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which)
+{
+ switch (which) {
+ case 0:
+ if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+ return 0x6D;
+ break;
+ case 1:
+ return 0x72;
+ case 2:
+ if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+ return 0x6F;
+ break;
+ case 3:
+ if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+ return 0x71;
+ break;
+ case 4:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
+ return 0x47;
+ break;
+ case 5:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
+ return 0x45;
+ break;
+ case 6:
+ if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+ return 0x70;
+ break;
+ case 7:
+ if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+ return 0x6E;
+ break;
+ case 8:
+ if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
+ return 0x75;
+ break;
+ case 9:
+ if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
+ return 0x74;
+ break;
+ case 10:
+ return 0x73;
+ case 11:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return 0x76;
+ break;
+ case 12:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return 0x77;
+ break;
+ }
+ return -ENODEV;
+}
+
+static int ADT7462_REG_VOLT(struct adt7462_data *data, int which)
+{
+ switch (which) {
+ case 0:
+ if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+ return 0xA3;
+ break;
+ case 1:
+ return 0x90;
+ case 2:
+ if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+ return 0xA9;
+ break;
+ case 3:
+ if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+ return 0xA7;
+ break;
+ case 4:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
+ return 0x8F;
+ break;
+ case 5:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
+ return 0x8B;
+ break;
+ case 6:
+ if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+ return 0x96;
+ break;
+ case 7:
+ if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+ return 0xA5;
+ break;
+ case 8:
+ if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
+ return 0x93;
+ break;
+ case 9:
+ if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
+ return 0x92;
+ break;
+ case 10:
+ return 0x91;
+ case 11:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return 0x94;
+ break;
+ case 12:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return 0x95;
+ break;
+ }
+ return -ENODEV;
+}
+
+/* Provide labels for sysfs */
+static const char *voltage_label(struct adt7462_data *data, int which)
+{
+ switch (which) {
+ case 0:
+ if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+ return "+12V1";
+ break;
+ case 1:
+ switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
+ case 0:
+ return "Vccp1";
+ case 1:
+ return "+2.5V";
+ case 2:
+ return "+1.8V";
+ case 3:
+ return "+1.5V";
+ }
+ case 2:
+ if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+ return "+12V3";
+ break;
+ case 3:
+ if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+ return "+5V";
+ break;
+ case 4:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
+ if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
+ return "+0.9V";
+ return "+1.25V";
+ }
+ break;
+ case 5:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
+ if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
+ return "+1.8V";
+ return "+2.5V";
+ }
+ break;
+ case 6:
+ if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+ return "+3.3V";
+ break;
+ case 7:
+ if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+ return "+12V2";
+ break;
+ case 8:
+ switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
+ case 0:
+ return "Vbatt";
+ case 1:
+ return "FSB_Vtt";
+ }
+ break;
+ case 9:
+ switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
+ case 0:
+ return "+3.3V";
+ case 1:
+ return "+1.2V1";
+ }
+ break;
+ case 10:
+ switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
+ case 0:
+ return "Vccp2";
+ case 1:
+ return "+2.5V";
+ case 2:
+ return "+1.8V";
+ case 3:
+ return "+1.5";
+ }
+ case 11:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return "+1.5V ICH";
+ break;
+ case 12:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return "+1.5V 3GPIO";
+ break;
+ }
+ return "N/A";
+}
+
+/* Multipliers are actually in uV, not mV. */
+static int voltage_multiplier(struct adt7462_data *data, int which)
+{
+ switch (which) {
+ case 0:
+ if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+ return 62500;
+ break;
+ case 1:
+ switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
+ case 0:
+ if (data->pin_cfg[0] & ADT7462_VID_INPUT)
+ return 12500;
+ return 6250;
+ case 1:
+ return 13000;
+ case 2:
+ return 9400;
+ case 3:
+ return 7800;
+ }
+ case 2:
+ if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+ return 62500;
+ break;
+ case 3:
+ if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+ return 26000;
+ break;
+ case 4:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
+ if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
+ return 4690;
+ return 6500;
+ }
+ break;
+ case 5:
+ if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
+ if (data->pin_cfg[1] & ADT7462_PIN15_INPUT)
+ return 9400;
+ return 13000;
+ }
+ break;
+ case 6:
+ if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+ return 17200;
+ break;
+ case 7:
+ if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+ return 62500;
+ break;
+ case 8:
+ switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
+ case 0:
+ return 15600;
+ case 1:
+ return 6250;
+ }
+ break;
+ case 9:
+ switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
+ case 0:
+ return 17200;
+ case 1:
+ return 6250;
+ }
+ break;
+ case 10:
+ switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
+ case 0:
+ return 6250;
+ case 1:
+ return 13000;
+ case 2:
+ return 9400;
+ case 3:
+ return 7800;
+ }
+ case 11:
+ case 12:
+ if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+ ADT7462_PIN28_VOLT &&
+ !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+ return 7800;
+ }
+ return 0;
+}
+
+static int temp_enabled(struct adt7462_data *data, int which)
+{
+ switch (which) {
+ case 0:
+ case 2:
+ return 1;
+ case 1:
+ if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
+ return 1;
+ break;
+ case 3:
+ if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
+ return 1;
+ break;
+ }
+ return 0;
+}
+
+static const char *temp_label(struct adt7462_data *data, int which)
+{
+ switch (which) {
+ case 0:
+ return "local";
+ case 1:
+ if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
+ return "remote1";
+ break;
+ case 2:
+ return "remote2";
+ case 3:
+ if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
+ return "remote3";
+ break;
+ }
+ return "N/A";
+}
+
+/* Map Trange register values to mC */
+#define NUM_TRANGE_VALUES 16
+static const int trange_values[NUM_TRANGE_VALUES] = {
+ 2000,
+ 2500,
+ 3300,
+ 4000,
+ 5000,
+ 6700,
+ 8000,
+ 10000,
+ 13300,
+ 16000,
+ 20000,
+ 26700,
+ 32000,
+ 40000,
+ 53300,
+ 80000
+};
+
+static int find_trange_value(int trange)
+{
+ int i;
+
+ for (i = 0; i < NUM_TRANGE_VALUES; i++)
+ if (trange_values[i] == trange)
+ return i;
+
+ return -ENODEV;
+}
+
+static struct adt7462_data *adt7462_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ unsigned long local_jiffies = jiffies;
+ int i;
+
+ mutex_lock(&data->lock);
+ if (time_before(local_jiffies, data->sensors_last_updated +
+ SENSOR_REFRESH_INTERVAL)
+ && data->sensors_valid)
+ goto no_sensor_update;
+
+ for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
+ /*
+ * Reading the fractional register locks the integral
+ * register until both have been read.
+ */
+ data->temp_frac[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_TEMP_REG(i));
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_TEMP_REG(i) + 1);
+ }
+
+ for (i = 0; i < ADT7462_FAN_COUNT; i++)
+ data->fan[i] = adt7462_read_word_data(client,
+ ADT7462_REG_FAN(i));
+
+ data->fan_enabled = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_FAN_ENABLE);
+
+ for (i = 0; i < ADT7462_PWM_COUNT; i++)
+ data->pwm[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_PWM(i));
+
+ for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++)
+ data->pin_cfg[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_PIN_CFG(i));
+
+ for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
+ int reg = ADT7462_REG_VOLT(data, i);
+ if (!reg)
+ data->voltages[i] = 0;
+ else
+ data->voltages[i] = i2c_smbus_read_byte_data(client,
+ reg);
+ }
+
+ data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1);
+ data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2);
+ data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3);
+ data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4);
+
+ data->sensors_last_updated = local_jiffies;
+ data->sensors_valid = 1;
+
+no_sensor_update:
+ if (time_before(local_jiffies, data->limits_last_updated +
+ LIMIT_REFRESH_INTERVAL)
+ && data->limits_valid)
+ goto out;
+
+ for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
+ data->temp_min[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_TEMP_MIN_REG(i));
+ data->temp_max[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_TEMP_MAX_REG(i));
+ }
+
+ for (i = 0; i < ADT7462_FAN_COUNT; i++)
+ data->fan_min[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_FAN_MIN(i));
+
+ for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
+ int reg = ADT7462_REG_VOLT_MAX(data, i);
+ data->volt_max[i] =
+ (reg ? i2c_smbus_read_byte_data(client, reg) : 0);
+
+ reg = ADT7462_REG_VOLT_MIN(data, i);
+ data->volt_min[i] =
+ (reg ? i2c_smbus_read_byte_data(client, reg) : 0);
+ }
+
+ for (i = 0; i < ADT7462_PWM_COUNT; i++) {
+ data->pwm_min[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_PWM_MIN(i));
+ data->pwm_tmin[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_PWM_TMIN(i));
+ data->pwm_trange[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_PWM_TRANGE(i));
+ data->pwm_cfg[i] = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_PWM_CFG(i));
+ }
+
+ data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX);
+
+ data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
+
+ data->limits_last_updated = local_jiffies;
+ data->limits_valid = 1;
+
+out:
+ mutex_unlock(&data->lock);
+ return data;
+}
+
+static ssize_t show_temp_min(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+
+ if (!temp_enabled(data, attr->index))
+ return sprintf(buf, "0\n");
+
+ return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64));
+}
+
+static ssize_t set_temp_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000) + 64;
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->temp_min[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+
+ if (!temp_enabled(data, attr->index))
+ return sprintf(buf, "0\n");
+
+ return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64));
+}
+
+static ssize_t set_temp_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000) + 64;
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->temp_max[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET;
+
+ if (!temp_enabled(data, attr->index))
+ return sprintf(buf, "0\n");
+
+ return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) +
+ 250 * frac);
+}
+
+static ssize_t show_temp_label(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+
+ return sprintf(buf, "%s\n", temp_label(data, attr->index));
+}
+
+static ssize_t show_volt_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ int x = voltage_multiplier(data, attr->index);
+
+ x *= data->volt_max[attr->index];
+ x /= 1000; /* convert from uV to mV */
+
+ return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t set_volt_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ int x = voltage_multiplier(data, attr->index);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp) || !x)
+ return -EINVAL;
+
+ temp *= 1000; /* convert mV to uV */
+ temp = ROUND_DIV(temp, x);
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->volt_max[attr->index] = temp;
+ i2c_smbus_write_byte_data(client,
+ ADT7462_REG_VOLT_MAX(data, attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_volt_min(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ int x = voltage_multiplier(data, attr->index);
+
+ x *= data->volt_min[attr->index];
+ x /= 1000; /* convert from uV to mV */
+
+ return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t set_volt_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ int x = voltage_multiplier(data, attr->index);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp) || !x)
+ return -EINVAL;
+
+ temp *= 1000; /* convert mV to uV */
+ temp = ROUND_DIV(temp, x);
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->volt_min[attr->index] = temp;
+ i2c_smbus_write_byte_data(client,
+ ADT7462_REG_VOLT_MIN(data, attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_voltage(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ int x = voltage_multiplier(data, attr->index);
+
+ x *= data->voltages[attr->index];
+ x /= 1000; /* convert from uV to mV */
+
+ return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t show_voltage_label(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+
+ return sprintf(buf, "%s\n", voltage_label(data, attr->index));
+}
+
+static ssize_t show_alarm(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ int reg = attr->index >> ADT7462_ALARM_REG_SHIFT;
+ int mask = attr->index & ADT7462_ALARM_FLAG_MASK;
+
+ if (data->alarms[reg] & mask)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static int fan_enabled(struct adt7462_data *data, int fan)
+{
+ return data->fan_enabled & (1 << fan);
+}
+
+static ssize_t show_fan_min(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ u16 temp;
+
+ /* Only the MSB of the min fan period is stored... */
+ temp = data->fan_min[attr->index];
+ temp <<= 8;
+
+ if (!fan_enabled(data, attr->index) ||
+ !FAN_DATA_VALID(temp))
+ return sprintf(buf, "0\n");
+
+ return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp));
+}
+
+static ssize_t set_fan_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp) || !temp ||
+ !fan_enabled(data, attr->index))
+ return -EINVAL;
+
+ temp = FAN_RPM_TO_PERIOD(temp);
+ temp >>= 8;
+ temp = SENSORS_LIMIT(temp, 1, 255);
+
+ mutex_lock(&data->lock);
+ data->fan_min[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+
+ if (!fan_enabled(data, attr->index) ||
+ !FAN_DATA_VALID(data->fan[attr->index]))
+ return sprintf(buf, "0\n");
+
+ return sprintf(buf, "%d\n",
+ FAN_PERIOD_TO_RPM(data->fan[attr->index]));
+}
+
+static ssize_t show_force_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7462_data *data = adt7462_update_device(dev);
+ return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0));
+}
+
+static ssize_t set_force_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+ u8 reg;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
+ if (temp)
+ reg |= ADT7462_FSPD_MASK;
+ else
+ reg &= ~ADT7462_FSPD_MASK;
+ data->cfg2 = reg;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm[attr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->pwm[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7462_data *data = adt7462_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_max);
+}
+
+static ssize_t set_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->pwm_max = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_min(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
+}
+
+static ssize_t set_pwm_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->pwm_min[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_hyst(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ return sprintf(buf, "%d\n", 1000 *
+ (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK));
+}
+
+static ssize_t set_pwm_hyst(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
+ temp = SENSORS_LIMIT(temp, 0, 15);
+
+ /* package things up */
+ temp &= ADT7462_PWM_HYST_MASK;
+ temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK;
+
+ mutex_lock(&data->lock);
+ data->pwm_trange[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_tmax(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+
+ /* tmax = tmin + trange */
+ int trange = trange_values[data->pwm_trange[attr->index] >>
+ ADT7462_PWM_RANGE_SHIFT];
+ int tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
+
+ return sprintf(buf, "%d\n", tmin + trange);
+}
+
+static ssize_t set_pwm_tmax(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ int temp;
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ int tmin, trange_value;
+ long trange;
+
+ if (strict_strtol(buf, 10, &trange))
+ return -EINVAL;
+
+ /* trange = tmax - tmin */
+ tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
+ trange_value = find_trange_value(trange - tmin);
+
+ if (trange_value < 0)
+ return -EINVAL;
+
+ temp = trange_value << ADT7462_PWM_RANGE_SHIFT;
+ temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK;
+
+ mutex_lock(&data->lock);
+ data->pwm_trange[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_tmin(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64));
+}
+
+static ssize_t set_pwm_tmin(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000) + 64;
+ temp = SENSORS_LIMIT(temp, 0, 255);
+
+ mutex_lock(&data->lock);
+ data->pwm_tmin[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_auto(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
+
+ switch (cfg) {
+ case 4: /* off */
+ return sprintf(buf, "0\n");
+ case 7: /* manual */
+ return sprintf(buf, "1\n");
+ default: /* automatic */
+ return sprintf(buf, "2\n");
+ }
+}
+
+static void set_pwm_channel(struct i2c_client *client,
+ struct adt7462_data *data,
+ int which,
+ int value)
+{
+ int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK;
+ temp |= value << ADT7462_PWM_CHANNEL_SHIFT;
+
+ mutex_lock(&data->lock);
+ data->pwm_cfg[which] = temp;
+ i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp);
+ mutex_unlock(&data->lock);
+}
+
+static ssize_t set_pwm_auto(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ switch (temp) {
+ case 0: /* off */
+ set_pwm_channel(client, data, attr->index, 4);
+ return count;
+ case 1: /* manual */
+ set_pwm_channel(client, data, attr->index, 7);
+ return count;
+ default:
+ return -EINVAL;
+ }
+}
+
+static ssize_t show_pwm_auto_temp(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7462_data *data = adt7462_update_device(dev);
+ int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
+
+ switch (channel) {
+ case 0: /* temp[1234] only */
+ case 1:
+ case 2:
+ case 3:
+ return sprintf(buf, "%d\n", (1 << channel));
+ case 5: /* temp1 & temp4 */
+ return sprintf(buf, "9\n");
+ case 6:
+ return sprintf(buf, "15\n");
+ default:
+ return sprintf(buf, "0\n");
+ }
+}
+
+static int cvt_auto_temp(int input)
+{
+ if (input == 0xF)
+ return 6;
+ if (input == 0x9)
+ return 5;
+ if (input < 1 || !is_power_of_2(input))
+ return -EINVAL;
+ return ilog2(input);
+}
+
+static ssize_t set_pwm_auto_temp(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7462_data *data = i2c_get_clientdata(client);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = cvt_auto_temp(temp);
+ if (temp < 0)
+ return temp;
+
+ set_pwm_channel(client, data, attr->index, temp);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 2);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 2);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM1 | ADT7462_LT_ALARM);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM1 | ADT7462_R1T_ALARM);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM1 | ADT7462_R2T_ALARM);
+static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM1 | ADT7462_R3T_ALARM);
+
+static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 0);
+static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 1);
+static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 2);
+static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 3);
+static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 4);
+static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 5);
+static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 6);
+static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 7);
+static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 8);
+static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 9);
+static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 10);
+static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 11);
+static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max,
+ set_volt_max, 12);
+
+static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 0);
+static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 1);
+static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 2);
+static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 3);
+static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 4);
+static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 5);
+static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 6);
+static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 7);
+static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 8);
+static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 9);
+static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 10);
+static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 11);
+static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min,
+ set_volt_min, 12);
+
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12);
+
+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7);
+static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8);
+static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9);
+static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10);
+static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11);
+static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12);
+
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V0_ALARM);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V7_ALARM);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V2_ALARM);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V6_ALARM);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V5_ALARM);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V4_ALARM);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V3_ALARM);
+static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM2 | ADT7462_V1_ALARM);
+static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM3 | ADT7462_V10_ALARM);
+static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM3 | ADT7462_V9_ALARM);
+static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM3 | ADT7462_V8_ALARM);
+static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM3 | ADT7462_V11_ALARM);
+static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM3 | ADT7462_V12_ALARM);
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 3);
+static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 4);
+static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 5);
+static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 6);
+static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F0_ALARM);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F1_ALARM);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F2_ALARM);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F3_ALARM);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F4_ALARM);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F5_ALARM);
+static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F6_ALARM);
+static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL,
+ ADT7462_ALARM4 | ADT7462_F7_ALARM);
+
+static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO,
+ show_force_pwm_max, set_force_pwm_max, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO,
+ show_pwm_hyst, set_pwm_hyst, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmax, set_pwm_tmax, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmax, set_pwm_tmax, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmax, set_pwm_tmax, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmax, set_pwm_tmax, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 2);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 3);
+
+static struct attribute *adt7462_attr[] =
+{
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+ &sensor_dev_attr_temp3_label.dev_attr.attr,
+ &sensor_dev_attr_temp4_label.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in8_max.dev_attr.attr,
+ &sensor_dev_attr_in9_max.dev_attr.attr,
+ &sensor_dev_attr_in10_max.dev_attr.attr,
+ &sensor_dev_attr_in11_max.dev_attr.attr,
+ &sensor_dev_attr_in12_max.dev_attr.attr,
+ &sensor_dev_attr_in13_max.dev_attr.attr,
+
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in6_min.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in8_min.dev_attr.attr,
+ &sensor_dev_attr_in9_min.dev_attr.attr,
+ &sensor_dev_attr_in10_min.dev_attr.attr,
+ &sensor_dev_attr_in11_min.dev_attr.attr,
+ &sensor_dev_attr_in12_min.dev_attr.attr,
+ &sensor_dev_attr_in13_min.dev_attr.attr,
+
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in11_input.dev_attr.attr,
+ &sensor_dev_attr_in12_input.dev_attr.attr,
+ &sensor_dev_attr_in13_input.dev_attr.attr,
+
+ &sensor_dev_attr_in1_label.dev_attr.attr,
+ &sensor_dev_attr_in2_label.dev_attr.attr,
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+ &sensor_dev_attr_in4_label.dev_attr.attr,
+ &sensor_dev_attr_in5_label.dev_attr.attr,
+ &sensor_dev_attr_in6_label.dev_attr.attr,
+ &sensor_dev_attr_in7_label.dev_attr.attr,
+ &sensor_dev_attr_in8_label.dev_attr.attr,
+ &sensor_dev_attr_in9_label.dev_attr.attr,
+ &sensor_dev_attr_in10_label.dev_attr.attr,
+ &sensor_dev_attr_in11_label.dev_attr.attr,
+ &sensor_dev_attr_in12_label.dev_attr.attr,
+ &sensor_dev_attr_in13_label.dev_attr.attr,
+
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
+ &sensor_dev_attr_in8_alarm.dev_attr.attr,
+ &sensor_dev_attr_in9_alarm.dev_attr.attr,
+ &sensor_dev_attr_in10_alarm.dev_attr.attr,
+ &sensor_dev_attr_in11_alarm.dev_attr.attr,
+ &sensor_dev_attr_in12_alarm.dev_attr.attr,
+ &sensor_dev_attr_in13_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan5_min.dev_attr.attr,
+ &sensor_dev_attr_fan6_min.dev_attr.attr,
+ &sensor_dev_attr_fan7_min.dev_attr.attr,
+ &sensor_dev_attr_fan8_min.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan5_input.dev_attr.attr,
+ &sensor_dev_attr_fan6_input.dev_attr.attr,
+ &sensor_dev_attr_fan7_input.dev_attr.attr,
+ &sensor_dev_attr_fan8_input.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan6_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan7_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan8_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_force_pwm_max.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm4.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm4_enable.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr,
+ NULL
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adt7462_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ if (kind <= 0) {
+ int vendor, device, revision;
+
+ vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
+ if (vendor != ADT7462_VENDOR)
+ return -ENODEV;
+
+ device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
+ if (device != ADT7462_DEVICE)
+ return -ENODEV;
+
+ revision = i2c_smbus_read_byte_data(client,
+ ADT7462_REG_REVISION);
+ if (revision != ADT7462_REVISION)
+ return -ENODEV;
+ } else
+ dev_dbg(&adapter->dev, "detection forced\n");
+
+ strlcpy(info->type, "adt7462", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int adt7462_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adt7462_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->lock);
+
+ dev_info(&client->dev, "%s chip found\n", client->name);
+
+ /* Register sysfs hooks */
+ data->attrs.attrs = adt7462_attr;
+ err = sysfs_create_group(&client->dev.kobj, &data->attrs);
+ if (err)
+ goto exit_free;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int adt7462_remove(struct i2c_client *client)
+{
+ struct adt7462_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
+ kfree(data);
+ return 0;
+}
+
+static int __init adt7462_init(void)
+{
+ return i2c_add_driver(&adt7462_driver);
+}
+
+static void __exit adt7462_exit(void)
+{
+ i2c_del_driver(&adt7462_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ADT7462 driver");
+MODULE_LICENSE("GPL");
+
+module_init(adt7462_init);
+module_exit(adt7462_exit);
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index d368d8f845e1..1311a595147e 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470);
#define FAN_PERIOD_INVALID 65535
#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
+#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))
+
struct adt7470_data {
struct device *hwmon_dev;
struct attribute_group attrs;
@@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10) / 1000;
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->temp_min[attr->index] = temp;
@@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10) / 1000;
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->temp_max[attr->index] = temp;
@@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
- if (!temp)
+ if (strict_strtol(buf, 10, &temp) || !temp)
return -EINVAL;
+
temp = FAN_RPM_TO_PERIOD(temp);
+ temp = SENSORS_LIMIT(temp, 1, 65534);
mutex_lock(&data->lock);
data->fan_max[attr->index] = temp;
@@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
- if (!temp)
+ if (strict_strtol(buf, 10, &temp) || !temp)
return -EINVAL;
+
temp = FAN_RPM_TO_PERIOD(temp);
+ temp = SENSORS_LIMIT(temp, 1, 65534);
mutex_lock(&data->lock);
data->fan_min[attr->index] = temp;
@@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
u8 reg;
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
mutex_lock(&data->lock);
data->force_pwm_max = temp;
reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
@@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm[attr->index] = temp;
@@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_max[attr->index] = temp;
@@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_min[attr->index] = temp;
@@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10) / 1000;
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_tmin[attr->index] = temp;
@@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index);
int pwm_auto_reg_mask;
+ long temp;
u8 reg;
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
if (attr->index % 2)
pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
else
@@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7470_data *data = i2c_get_clientdata(client);
- int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10));
int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index);
+ long temp;
u8 reg;
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = cvt_auto_temp(temp);
if (temp < 0)
return temp;
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index b9a8ea30c99c..18aa30866a6c 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -129,6 +129,8 @@ I2C_CLIENT_INSMOD_1(adt7473);
#define FAN_PERIOD_INVALID 65535
#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
+#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))
+
struct adt7473_data {
struct device *hwmon_dev;
struct attribute_group attrs;
@@ -357,7 +359,12 @@ static ssize_t set_volt_min(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+ long volt;
+
+ if (strict_strtol(buf, 10, &volt))
+ return -EINVAL;
+
+ volt = encode_volt(attr->index, volt);
mutex_lock(&data->lock);
data->volt_min[attr->index] = volt;
@@ -386,7 +393,12 @@ static ssize_t set_volt_max(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+ long volt;
+
+ if (strict_strtol(buf, 10, &volt))
+ return -EINVAL;
+
+ volt = encode_volt(attr->index, volt);
mutex_lock(&data->lock);
data->volt_max[attr->index] = volt;
@@ -419,7 +431,8 @@ static int decode_temp(u8 twos_complement, u8 raw)
static u8 encode_temp(u8 twos_complement, int cooked)
{
- return twos_complement ? cooked & 0xFF : cooked + 64;
+ u8 ret = twos_complement ? cooked & 0xFF : cooked + 64;
+ return SENSORS_LIMIT(ret, 0, 255);
}
static ssize_t show_temp_min(struct device *dev,
@@ -441,7 +454,12 @@ static ssize_t set_temp_min(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10) / 1000;
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
@@ -472,7 +490,12 @@ static ssize_t set_temp_max(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10) / 1000;
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
@@ -515,11 +538,13 @@ static ssize_t set_fan_min(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
- if (!temp)
+ if (strict_strtol(buf, 10, &temp) || !temp)
return -EINVAL;
+
temp = FAN_RPM_TO_PERIOD(temp);
+ temp = SENSORS_LIMIT(temp, 1, 65534);
mutex_lock(&data->lock);
data->fan_min[attr->index] = temp;
@@ -558,7 +583,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev,
u8 reg;
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
mutex_lock(&data->lock);
data->max_duty_at_overheat = !!temp;
@@ -587,7 +615,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm[attr->index] = temp;
@@ -614,7 +647,12 @@ static ssize_t set_pwm_max(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_max[attr->index] = temp;
@@ -642,7 +680,12 @@ static ssize_t set_pwm_min(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = SENSORS_LIMIT(temp, 0, 255);
mutex_lock(&data->lock);
data->pwm_min[attr->index] = temp;
@@ -672,7 +715,12 @@ static ssize_t set_temp_tmax(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10) / 1000;
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
@@ -703,7 +751,12 @@ static ssize_t set_temp_tmin(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10) / 1000;
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
+
+ temp = ROUND_DIV(temp, 1000);
temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
@@ -741,7 +794,10 @@ static ssize_t set_pwm_enable(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
switch (temp) {
case 0:
@@ -805,7 +861,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp;
+
+ if (strict_strtol(buf, 10, &temp))
+ return -EINVAL;
switch (temp) {
case 1:
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index bc011da79e14..488e45cd43d7 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -116,6 +116,18 @@ static const char* temperature_sensors_sets[][36] = {
/* Set 9: Macbook Pro 3,1 (Santa Rosa) */
{ "TALP", "TB0T", "TC0D", "TC0P", "TG0D", "TG0H", "TTF0", "TW0P",
"Th0H", "Th1H", "Th2H", "Tm0P", "Ts0P", NULL },
+/* Set 10: iMac 5,1 */
+ { "TA0P", "TC0D", "TC0P", "TG0D", "TH0P", "TO0P", "Tm0P", NULL },
+/* Set 11: Macbook 5,1 */
+ { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0P", "TN0D", "TN0P",
+ "TTF0", "Th0H", "Th1H", "ThFH", "Ts0P", "Ts0S", NULL },
+/* Set 12: Macbook Pro 5,1 */
+ { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D",
+ "TG0F", "TG0H", "TG0P", "TG0T", "TG1H", "TN0D", "TN0P", "TTF0",
+ "Th2H", "Tm0P", "Ts0P", "Ts0S", NULL },
+/* Set 13: iMac 8,1 */
+ { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
+ "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL },
};
/* List of keys used to read/write fan speeds */
@@ -1268,7 +1280,7 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
/* iMac: temperature set 5 */
{ .accelerometer = 0, .light = 0, .temperature_set = 5 },
-/* MacBook3: accelerometer and temperature set 6 */
+/* MacBook3, MacBook4: accelerometer and temperature set 6 */
{ .accelerometer = 1, .light = 0, .temperature_set = 6 },
/* MacBook Air: accelerometer, backlight and temperature set 7 */
{ .accelerometer = 1, .light = 1, .temperature_set = 7 },
@@ -1276,6 +1288,14 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
{ .accelerometer = 1, .light = 1, .temperature_set = 8 },
/* MacBook Pro 3: accelerometer, backlight and temperature set 9 */
{ .accelerometer = 1, .light = 1, .temperature_set = 9 },
+/* iMac 5: light sensor only, temperature set 10 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 10 },
+/* MacBook 5: accelerometer, backlight and temperature set 11 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 11 },
+/* MacBook Pro 5: accelerometer, backlight and temperature set 12 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 12 },
+/* iMac 8: light sensor only, temperature set 13 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 13 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1285,6 +1305,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") },
&applesmc_dmi_data[7]},
+ { applesmc_dmi_match, "Apple MacBook Pro 5", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") },
+ &applesmc_dmi_data[12]},
{ applesmc_dmi_match, "Apple MacBook Pro 4", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4") },
@@ -1305,6 +1329,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
&applesmc_dmi_data[6]},
+ { applesmc_dmi_match, "Apple MacBook 4", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") },
+ &applesmc_dmi_data[6]},
+ { applesmc_dmi_match, "Apple MacBook 5", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") },
+ &applesmc_dmi_data[11]},
{ applesmc_dmi_match, "Apple MacBook", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
@@ -1317,6 +1349,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
&applesmc_dmi_data[4]},
+ { applesmc_dmi_match, "Apple iMac 8", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
+ &applesmc_dmi_data[13]},
+ { applesmc_dmi_match, "Apple iMac 5", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") },
+ &applesmc_dmi_data[10]},
{ applesmc_dmi_match, "Apple iMac", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 7b0ed5dea399..fe74609a7feb 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -88,9 +88,11 @@
static DEFINE_IDR(aem_idr);
static DEFINE_SPINLOCK(aem_idr_lock);
-static struct device_driver aem_driver = {
- .name = DRVNAME,
- .bus = &platform_bus_type,
+static struct platform_driver aem_driver = {
+ .driver = {
+ .name = DRVNAME,
+ .bus = &platform_bus_type,
+ }
};
struct aem_ipmi_data {
@@ -583,7 +585,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
data->pdev = platform_device_alloc(DRVNAME, data->id);
if (!data->pdev)
goto dev_err;
- data->pdev->dev.driver = &aem_driver;
+ data->pdev->dev.driver = &aem_driver.driver;
res = platform_device_add(data->pdev);
if (res)
@@ -716,7 +718,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
data->pdev = platform_device_alloc(DRVNAME, data->id);
if (!data->pdev)
goto dev_err;
- data->pdev->dev.driver = &aem_driver;
+ data->pdev->dev.driver = &aem_driver.driver;
res = platform_device_add(data->pdev);
if (res)
@@ -1085,7 +1087,7 @@ static int __init aem_init(void)
{
int res;
- res = driver_register(&aem_driver);
+ res = driver_register(&aem_driver.driver);
if (res) {
printk(KERN_ERR "Can't register aem driver\n");
return res;
@@ -1097,7 +1099,7 @@ static int __init aem_init(void)
return 0;
ipmi_reg_err:
- driver_unregister(&aem_driver);
+ driver_unregister(&aem_driver.driver);
return res;
}
@@ -1107,7 +1109,7 @@ static void __exit aem_exit(void)
struct aem_data *p1, *next1;
ipmi_smi_watcher_unregister(&driver_data.bmc_events);
- driver_unregister(&aem_driver);
+ driver_unregister(&aem_driver.driver);
list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
aem_delete(p1);
}
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
new file mode 100644
index 000000000000..752b5c44df9c
--- /dev/null
+++ b/drivers/hwmon/lis3lv02d.c
@@ -0,0 +1,582 @@
+/*
+ * lis3lv02d.c - ST LIS3LV02DL accelerometer driver
+ *
+ * Copyright (C) 2007-2008 Yan Burman
+ * Copyright (C) 2008 Eric Piel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/semaphore.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/freezer.h>
+#include <linux/version.h>
+#include <linux/uaccess.h>
+#include <acpi/acpi_drivers.h>
+#include <asm/atomic.h>
+#include "lis3lv02d.h"
+
+#define DRIVER_NAME "lis3lv02d"
+#define ACPI_MDPS_CLASS "accelerometer"
+
+/* joystick device poll interval in milliseconds */
+#define MDPS_POLL_INTERVAL 50
+/*
+ * The sensor can also generate interrupts (DRDY) but it's pretty pointless
+ * because their are generated even if the data do not change. So it's better
+ * to keep the interrupt for the free-fall event. The values are updated at
+ * 40Hz (at the lowest frequency), but as it can be pretty time consuming on
+ * some low processor, we poll the sensor only at 20Hz... enough for the
+ * joystick.
+ */
+
+/* Maximum value our axis may get for the input device (signed 12 bits) */
+#define MDPS_MAX_VAL 2048
+
+struct axis_conversion {
+ s8 x;
+ s8 y;
+ s8 z;
+};
+
+struct acpi_lis3lv02d {
+ struct acpi_device *device; /* The ACPI device */
+ struct input_dev *idev; /* input device */
+ struct task_struct *kthread; /* kthread for input */
+ struct mutex lock;
+ struct platform_device *pdev; /* platform device */
+ atomic_t count; /* interrupt count after last read */
+ int xcalib; /* calibrated null value for x */
+ int ycalib; /* calibrated null value for y */
+ int zcalib; /* calibrated null value for z */
+ unsigned char is_on; /* whether the device is on or off */
+ unsigned char usage; /* usage counter */
+ struct axis_conversion ac; /* hw -> logical axis */
+};
+
+static struct acpi_lis3lv02d adev;
+
+static int lis3lv02d_remove_fs(void);
+static int lis3lv02d_add_fs(struct acpi_device *device);
+
+/* For automatic insertion of the module */
+static struct acpi_device_id lis3lv02d_device_ids[] = {
+ {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
+
+/**
+ * lis3lv02d_acpi_init - ACPI _INI method: initialize the device.
+ * @handle: the handle of the device
+ *
+ * Returns AE_OK on success.
+ */
+static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle)
+{
+ return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL);
+}
+
+/**
+ * lis3lv02d_acpi_read - ACPI ALRD method: read a register
+ * @handle: the handle of the device
+ * @reg: the register to read
+ * @ret: result of the operation
+ *
+ * Returns AE_OK on success.
+ */
+static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret)
+{
+ union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list args = { 1, &arg0 };
+ unsigned long long lret;
+ acpi_status status;
+
+ arg0.integer.value = reg;
+
+ status = acpi_evaluate_integer(handle, "ALRD", &args, &lret);
+ *ret = lret;
+ return status;
+}
+
+/**
+ * lis3lv02d_acpi_write - ACPI ALWR method: write to a register
+ * @handle: the handle of the device
+ * @reg: the register to write to
+ * @val: the value to write
+ *
+ * Returns AE_OK on success.
+ */
+static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val)
+{
+ unsigned long long ret; /* Not used when writting */
+ union acpi_object in_obj[2];
+ struct acpi_object_list args = { 2, in_obj };
+
+ in_obj[0].type = ACPI_TYPE_INTEGER;
+ in_obj[0].integer.value = reg;
+ in_obj[1].type = ACPI_TYPE_INTEGER;
+ in_obj[1].integer.value = val;
+
+ return acpi_evaluate_integer(handle, "ALWR", &args, &ret);
+}
+
+static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+{
+ u8 lo, hi;
+
+ lis3lv02d_acpi_read(handle, reg, &lo);
+ lis3lv02d_acpi_read(handle, reg + 1, &hi);
+ /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+ return (s16)((hi << 8) | lo);
+}
+
+/**
+ * lis3lv02d_get_axis - For the given axis, give the value converted
+ * @axis: 1,2,3 - can also be negative
+ * @hw_values: raw values returned by the hardware
+ *
+ * Returns the converted value.
+ */
+static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3])
+{
+ if (axis > 0)
+ return hw_values[axis - 1];
+ else
+ return -hw_values[-axis - 1];
+}
+
+/**
+ * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
+ * @handle: the handle to the device
+ * @x: where to store the X axis value
+ * @y: where to store the Y axis value
+ * @z: where to store the Z axis value
+ *
+ * Note that 40Hz input device can eat up about 10% CPU at 800MHZ
+ */
+static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
+{
+ int position[3];
+
+ position[0] = lis3lv02d_read_16(handle, OUTX_L);
+ position[1] = lis3lv02d_read_16(handle, OUTY_L);
+ position[2] = lis3lv02d_read_16(handle, OUTZ_L);
+
+ *x = lis3lv02d_get_axis(adev.ac.x, position);
+ *y = lis3lv02d_get_axis(adev.ac.y, position);
+ *z = lis3lv02d_get_axis(adev.ac.z, position);
+}
+
+static inline void lis3lv02d_poweroff(acpi_handle handle)
+{
+ adev.is_on = 0;
+ /* disable X,Y,Z axis and power down */
+ lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00);
+}
+
+static void lis3lv02d_poweron(acpi_handle handle)
+{
+ u8 val;
+
+ adev.is_on = 1;
+ lis3lv02d_acpi_init(handle);
+ lis3lv02d_acpi_write(handle, FF_WU_CFG, 0);
+ /*
+ * BDU: LSB and MSB values are not updated until both have been read.
+ * So the value read will always be correct.
+ * IEN: Interrupt for free-fall and DD, not for data-ready.
+ */
+ lis3lv02d_acpi_read(handle, CTRL_REG2, &val);
+ val |= CTRL2_BDU | CTRL2_IEN;
+ lis3lv02d_acpi_write(handle, CTRL_REG2, val);
+}
+
+#ifdef CONFIG_PM
+static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
+{
+ /* make sure the device is off when we suspend */
+ lis3lv02d_poweroff(device->handle);
+ return 0;
+}
+
+static int lis3lv02d_resume(struct acpi_device *device)
+{
+ /* put back the device in the right state (ACPI might turn it on) */
+ mutex_lock(&adev.lock);
+ if (adev.usage > 0)
+ lis3lv02d_poweron(device->handle);
+ else
+ lis3lv02d_poweroff(device->handle);
+ mutex_unlock(&adev.lock);
+ return 0;
+}
+#else
+#define lis3lv02d_suspend NULL
+#define lis3lv02d_resume NULL
+#endif
+
+
+/*
+ * To be called before starting to use the device. It makes sure that the
+ * device will always be on until a call to lis3lv02d_decrease_use(). Not to be
+ * used from interrupt context.
+ */
+static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev)
+{
+ mutex_lock(&dev->lock);
+ dev->usage++;
+ if (dev->usage == 1) {
+ if (!dev->is_on)
+ lis3lv02d_poweron(dev->device->handle);
+ }
+ mutex_unlock(&dev->lock);
+}
+
+/*
+ * To be called whenever a usage of the device is stopped.
+ * It will make sure to turn off the device when there is not usage.
+ */
+static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
+{
+ mutex_lock(&dev->lock);
+ dev->usage--;
+ if (dev->usage == 0)
+ lis3lv02d_poweroff(dev->device->handle);
+ mutex_unlock(&dev->lock);
+}
+
+/**
+ * lis3lv02d_joystick_kthread - Kthread polling function
+ * @data: unused - here to conform to threadfn prototype
+ */
+static int lis3lv02d_joystick_kthread(void *data)
+{
+ int x, y, z;
+
+ while (!kthread_should_stop()) {
+ lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
+ input_report_abs(adev.idev, ABS_X, x - adev.xcalib);
+ input_report_abs(adev.idev, ABS_Y, y - adev.ycalib);
+ input_report_abs(adev.idev, ABS_Z, z - adev.zcalib);
+
+ input_sync(adev.idev);
+
+ try_to_freeze();
+ msleep_interruptible(MDPS_POLL_INTERVAL);
+ }
+
+ return 0;
+}
+
+static int lis3lv02d_joystick_open(struct input_dev *input)
+{
+ lis3lv02d_increase_use(&adev);
+ adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d");
+ if (IS_ERR(adev.kthread)) {
+ lis3lv02d_decrease_use(&adev);
+ return PTR_ERR(adev.kthread);
+ }
+
+ return 0;
+}
+
+static void lis3lv02d_joystick_close(struct input_dev *input)
+{
+ kthread_stop(adev.kthread);
+ lis3lv02d_decrease_use(&adev);
+}
+
+
+static inline void lis3lv02d_calibrate_joystick(void)
+{
+ lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
+}
+
+static int lis3lv02d_joystick_enable(void)
+{
+ int err;
+
+ if (adev.idev)
+ return -EINVAL;
+
+ adev.idev = input_allocate_device();
+ if (!adev.idev)
+ return -ENOMEM;
+
+ lis3lv02d_calibrate_joystick();
+
+ adev.idev->name = "ST LIS3LV02DL Accelerometer";
+ adev.idev->phys = DRIVER_NAME "/input0";
+ adev.idev->id.bustype = BUS_HOST;
+ adev.idev->id.vendor = 0;
+ adev.idev->dev.parent = &adev.pdev->dev;
+ adev.idev->open = lis3lv02d_joystick_open;
+ adev.idev->close = lis3lv02d_joystick_close;
+
+ set_bit(EV_ABS, adev.idev->evbit);
+ input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+ input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+ input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+
+ err = input_register_device(adev.idev);
+ if (err) {
+ input_free_device(adev.idev);
+ adev.idev = NULL;
+ }
+
+ return err;
+}
+
+static void lis3lv02d_joystick_disable(void)
+{
+ if (!adev.idev)
+ return;
+
+ input_unregister_device(adev.idev);
+ adev.idev = NULL;
+}
+
+
+/*
+ * Initialise the accelerometer and the various subsystems.
+ * Should be rather independant of the bus system.
+ */
+static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
+{
+ mutex_init(&dev->lock);
+ lis3lv02d_add_fs(dev->device);
+ lis3lv02d_increase_use(dev);
+
+ if (lis3lv02d_joystick_enable())
+ printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+
+ lis3lv02d_decrease_use(dev);
+ return 0;
+}
+
+static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi)
+{
+ adev.ac = *((struct axis_conversion *)dmi->driver_data);
+ printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident);
+
+ return 1;
+}
+
+/* Represents, for each axis seen by userspace, the corresponding hw axis (+1).
+ * If the value is negative, the opposite of the hw value is used. */
+static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3};
+static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
+static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
+static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
+static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
+
+#define AXIS_DMI_MATCH(_ident, _name, _axis) { \
+ .ident = _ident, \
+ .callback = lis3lv02d_dmi_matched, \
+ .matches = { \
+ DMI_MATCH(DMI_PRODUCT_NAME, _name) \
+ }, \
+ .driver_data = &lis3lv02d_axis_##_axis \
+}
+static struct dmi_system_id lis3lv02d_dmi_ids[] = {
+ /* product names are truncated to match all kinds of a same model */
+ AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
+ AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted),
+ AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted),
+ AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted),
+ AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
+ AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
+ AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
+ { NULL, }
+/* Laptop models without axis info (yet):
+ * "NC651xx" "HP Compaq 651"
+ * "NC671xx" "HP Compaq 671"
+ * "NC6910" "HP Compaq 6910"
+ * HP Compaq 8710x Notebook PC / Mobile Workstation
+ * "NC2400" "HP Compaq nc2400"
+ * "NX74x0" "HP Compaq nx74"
+ * "NX6325" "HP Compaq nx6325"
+ * "NC4400" "HP Compaq nc4400"
+ */
+};
+
+static int lis3lv02d_add(struct acpi_device *device)
+{
+ u8 val;
+
+ if (!device)
+ return -EINVAL;
+
+ adev.device = device;
+ strcpy(acpi_device_name(device), DRIVER_NAME);
+ strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
+ device->driver_data = &adev;
+
+ lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
+ if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
+ printk(KERN_ERR DRIVER_NAME
+ ": Accelerometer chip not LIS3LV02D{L,Q}\n");
+ }
+
+ /* If possible use a "standard" axes order */
+ if (dmi_check_system(lis3lv02d_dmi_ids) == 0) {
+ printk(KERN_INFO DRIVER_NAME ": laptop model unknown, "
+ "using default axes configuration\n");
+ adev.ac = lis3lv02d_axis_normal;
+ }
+
+ return lis3lv02d_init_device(&adev);
+}
+
+static int lis3lv02d_remove(struct acpi_device *device, int type)
+{
+ if (!device)
+ return -EINVAL;
+
+ lis3lv02d_joystick_disable();
+ lis3lv02d_poweroff(device->handle);
+
+ return lis3lv02d_remove_fs();
+}
+
+
+/* Sysfs stuff */
+static ssize_t lis3lv02d_position_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int x, y, z;
+
+ lis3lv02d_increase_use(&adev);
+ lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
+ lis3lv02d_decrease_use(&adev);
+ return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
+}
+
+static ssize_t lis3lv02d_calibrate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib);
+}
+
+static ssize_t lis3lv02d_calibrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ lis3lv02d_increase_use(&adev);
+ lis3lv02d_calibrate_joystick();
+ lis3lv02d_decrease_use(&adev);
+ return count;
+}
+
+/* conversion btw sampling rate and the register values */
+static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560};
+static ssize_t lis3lv02d_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u8 ctrl;
+ int val;
+
+ lis3lv02d_increase_use(&adev);
+ lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl);
+ lis3lv02d_decrease_use(&adev);
+ val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
+ return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
+}
+
+static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
+static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show,
+ lis3lv02d_calibrate_store);
+static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL);
+
+static struct attribute *lis3lv02d_attributes[] = {
+ &dev_attr_position.attr,
+ &dev_attr_calibrate.attr,
+ &dev_attr_rate.attr,
+ NULL
+};
+
+static struct attribute_group lis3lv02d_attribute_group = {
+ .attrs = lis3lv02d_attributes
+};
+
+static int lis3lv02d_add_fs(struct acpi_device *device)
+{
+ adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+ if (IS_ERR(adev.pdev))
+ return PTR_ERR(adev.pdev);
+
+ return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+}
+
+static int lis3lv02d_remove_fs(void)
+{
+ sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+ platform_device_unregister(adev.pdev);
+ return 0;
+}
+
+/* For the HP MDPS aka 3D Driveguard */
+static struct acpi_driver lis3lv02d_driver = {
+ .name = DRIVER_NAME,
+ .class = ACPI_MDPS_CLASS,
+ .ids = lis3lv02d_device_ids,
+ .ops = {
+ .add = lis3lv02d_add,
+ .remove = lis3lv02d_remove,
+ .suspend = lis3lv02d_suspend,
+ .resume = lis3lv02d_resume,
+ }
+};
+
+static int __init lis3lv02d_init_module(void)
+{
+ int ret;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ ret = acpi_bus_register_driver(&lis3lv02d_driver);
+ if (ret < 0)
+ return ret;
+
+ printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
+
+ return 0;
+}
+
+static void __exit lis3lv02d_exit_module(void)
+{
+ acpi_bus_unregister_driver(&lis3lv02d_driver);
+}
+
+MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
+MODULE_AUTHOR("Yan Burman and Eric Piel");
+MODULE_LICENSE("GPL");
+
+module_init(lis3lv02d_init_module);
+module_exit(lis3lv02d_exit_module);
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
new file mode 100644
index 000000000000..330cfc60e948
--- /dev/null
+++ b/drivers/hwmon/lis3lv02d.h
@@ -0,0 +1,149 @@
+/*
+ * lis3lv02d.h - ST LIS3LV02DL accelerometer driver
+ *
+ * Copyright (C) 2007-2008 Yan Burman
+ * Copyright (C) 2008 Eric Piel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
+ * be connected via SPI. There exists also several similar chips (such as LIS302DL or
+ * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * They can also be connected via I²C.
+ */
+
+#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */
+#define LIS302DL_ID 0x3B /* Also the LIS202DL! */
+
+enum lis3lv02d_reg {
+ WHO_AM_I = 0x0F,
+ OFFSET_X = 0x16,
+ OFFSET_Y = 0x17,
+ OFFSET_Z = 0x18,
+ GAIN_X = 0x19,
+ GAIN_Y = 0x1A,
+ GAIN_Z = 0x1B,
+ CTRL_REG1 = 0x20,
+ CTRL_REG2 = 0x21,
+ CTRL_REG3 = 0x22,
+ HP_FILTER_RESET = 0x23,
+ STATUS_REG = 0x27,
+ OUTX_L = 0x28,
+ OUTX_H = 0x29,
+ OUTY_L = 0x2A,
+ OUTY_H = 0x2B,
+ OUTZ_L = 0x2C,
+ OUTZ_H = 0x2D,
+ FF_WU_CFG = 0x30,
+ FF_WU_SRC = 0x31,
+ FF_WU_ACK = 0x32,
+ FF_WU_THS_L = 0x34,
+ FF_WU_THS_H = 0x35,
+ FF_WU_DURATION = 0x36,
+ DD_CFG = 0x38,
+ DD_SRC = 0x39,
+ DD_ACK = 0x3A,
+ DD_THSI_L = 0x3C,
+ DD_THSI_H = 0x3D,
+ DD_THSE_L = 0x3E,
+ DD_THSE_H = 0x3F,
+};
+
+enum lis3lv02d_ctrl1 {
+ CTRL1_Xen = 0x01,
+ CTRL1_Yen = 0x02,
+ CTRL1_Zen = 0x04,
+ CTRL1_ST = 0x08,
+ CTRL1_DF0 = 0x10,
+ CTRL1_DF1 = 0x20,
+ CTRL1_PD0 = 0x40,
+ CTRL1_PD1 = 0x80,
+};
+enum lis3lv02d_ctrl2 {
+ CTRL2_DAS = 0x01,
+ CTRL2_SIM = 0x02,
+ CTRL2_DRDY = 0x04,
+ CTRL2_IEN = 0x08,
+ CTRL2_BOOT = 0x10,
+ CTRL2_BLE = 0x20,
+ CTRL2_BDU = 0x40, /* Block Data Update */
+ CTRL2_FS = 0x80, /* Full Scale selection */
+};
+
+
+enum lis3lv02d_ctrl3 {
+ CTRL3_CFS0 = 0x01,
+ CTRL3_CFS1 = 0x02,
+ CTRL3_FDS = 0x10,
+ CTRL3_HPFF = 0x20,
+ CTRL3_HPDD = 0x40,
+ CTRL3_ECK = 0x80,
+};
+
+enum lis3lv02d_status_reg {
+ STATUS_XDA = 0x01,
+ STATUS_YDA = 0x02,
+ STATUS_ZDA = 0x04,
+ STATUS_XYZDA = 0x08,
+ STATUS_XOR = 0x10,
+ STATUS_YOR = 0x20,
+ STATUS_ZOR = 0x40,
+ STATUS_XYZOR = 0x80,
+};
+
+enum lis3lv02d_ff_wu_cfg {
+ FF_WU_CFG_XLIE = 0x01,
+ FF_WU_CFG_XHIE = 0x02,
+ FF_WU_CFG_YLIE = 0x04,
+ FF_WU_CFG_YHIE = 0x08,
+ FF_WU_CFG_ZLIE = 0x10,
+ FF_WU_CFG_ZHIE = 0x20,
+ FF_WU_CFG_LIR = 0x40,
+ FF_WU_CFG_AOI = 0x80,
+};
+
+enum lis3lv02d_ff_wu_src {
+ FF_WU_SRC_XL = 0x01,
+ FF_WU_SRC_XH = 0x02,
+ FF_WU_SRC_YL = 0x04,
+ FF_WU_SRC_YH = 0x08,
+ FF_WU_SRC_ZL = 0x10,
+ FF_WU_SRC_ZH = 0x20,
+ FF_WU_SRC_IA = 0x40,
+};
+
+enum lis3lv02d_dd_cfg {
+ DD_CFG_XLIE = 0x01,
+ DD_CFG_XHIE = 0x02,
+ DD_CFG_YLIE = 0x04,
+ DD_CFG_YHIE = 0x08,
+ DD_CFG_ZLIE = 0x10,
+ DD_CFG_ZHIE = 0x20,
+ DD_CFG_LIR = 0x40,
+ DD_CFG_IEND = 0x80,
+};
+
+enum lis3lv02d_dd_src {
+ DD_SRC_XL = 0x01,
+ DD_SRC_XH = 0x02,
+ DD_SRC_YL = 0x04,
+ DD_SRC_YH = 0x08,
+ DD_SRC_ZL = 0x10,
+ DD_SRC_ZH = 0x20,
+ DD_SRC_IA = 0x40,
+};
+
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 3ff0285396fa..cfc1ee90f5a3 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -39,7 +39,8 @@
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
-I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
+I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100,
+ emc6d102);
/* The LM85 registers */
@@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
#define LM85_REG_COMPANY 0x3e
#define LM85_REG_VERSTEP 0x3f
+
+#define ADT7468_REG_CFG5 0x7c
+#define ADT7468_OFF64 0x01
+#define IS_ADT7468_OFF64(data) \
+ ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
+
/* These are the recognized values for the above regs */
#define LM85_COMPANY_NATIONAL 0x01
#define LM85_COMPANY_ANALOG_DEV 0x41
@@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
#define LM85_VERSTEP_ADM1027 0x60
#define LM85_VERSTEP_ADT7463 0x62
#define LM85_VERSTEP_ADT7463C 0x6A
+#define LM85_VERSTEP_ADT7468_1 0x71
+#define LM85_VERSTEP_ADT7468_2 0x72
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
#define LM85_VERSTEP_EMC6D102 0x65
@@ -306,6 +315,7 @@ struct lm85_data {
u8 vid; /* Register value */
u8 vrm; /* VRM version */
u32 alarms; /* Register encoding, combined */
+ u8 cfg5; /* Config Register 5 on ADT7468 */
struct lm85_autofan autofan[3];
struct lm85_zone zone[3];
};
@@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
+ if (IS_ADT7468_OFF64(data))
+ val += 64;
+
mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
@@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
+ if (IS_ADT7468_OFF64(data))
+ val += 64;
+
mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
@@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind,
case LM85_VERSTEP_ADT7463C:
kind = adt7463;
break;
+ case LM85_VERSTEP_ADT7468_1:
+ case LM85_VERSTEP_ADT7468_2:
+ kind = adt7468;
+ break;
}
} else if (company == LM85_COMPANY_SMSC) {
switch (verstep) {
@@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind,
case adt7463:
type_name = "adt7463";
break;
+ case adt7468:
+ type_name = "adt7468";
+ break;
case emc6d100:
type_name = "emc6d100";
break;
@@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client,
if (err)
goto err_kfree;
- /* The ADT7463 has an optional VRM 10 mode where pin 21 is used
+ /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
as a sixth digital VID input rather than an analog input. */
data->vid = lm85_read_value(client, LM85_REG_VID);
- if (!(data->type == adt7463 && (data->vid & 0x80)))
+ if (!((data->type == adt7463 || data->type == adt7468) &&
+ (data->vid & 0x80)))
if ((err = sysfs_create_group(&client->dev.kobj,
&lm85_group_in4)))
goto err_remove_files;
@@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
* There are 2 additional resolution bits per channel and we
* have room for 4, so we shift them to the left.
*/
- if (data->type == adm1027 || data->type == adt7463) {
+ if (data->type == adm1027 || data->type == adt7463 ||
+ data->type == adt7468) {
int ext1 = lm85_read_value(client,
ADM1027_REG_EXTEND_ADC1);
int ext2 = lm85_read_value(client,
@@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev)
lm85_read_value(client, LM85_REG_FAN(i));
}
- if (!(data->type == adt7463 && (data->vid & 0x80))) {
+ if (!((data->type == adt7463 || data->type == adt7468) &&
+ (data->vid & 0x80))) {
data->in[4] = lm85_read_value(client,
LM85_REG_IN(4));
}
+ if (data->type == adt7468)
+ data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
+
for (i = 0; i <= 2; ++i) {
data->temp[i] =
lm85_read_value(client, LM85_REG_TEMP(i));
data->pwm[i] =
lm85_read_value(client, LM85_REG_PWM(i));
+
+ if (IS_ADT7468_OFF64(data))
+ data->temp[i] -= 64;
}
data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
@@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
lm85_read_value(client, LM85_REG_FAN_MIN(i));
}
- if (!(data->type == adt7463 && (data->vid & 0x80))) {
+ if (!((data->type == adt7463 || data->type == adt7468) &&
+ (data->vid & 0x80))) {
data->in_min[4] = lm85_read_value(client,
LM85_REG_IN_MIN(4));
data->in_max[4] = lm85_read_value(client,
@@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev)
lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
data->zone[i].critical =
lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+
+ if (IS_ADT7468_OFF64(data)) {
+ data->temp_min[i] -= 64;
+ data->temp_max[i] -= 64;
+ data->zone[i].limit -= 64;
+ data->zone[i].critical -= 64;
+ }
}
i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
index 108264de0ac9..f15e90a453d1 100644
--- a/drivers/idle/Kconfig
+++ b/drivers/idle/Kconfig
@@ -1,5 +1,6 @@
menu "Memory power savings"
+depends on X86_64
config I7300_IDLE_IOAT_CHANNEL
bool
@@ -7,7 +8,7 @@ config I7300_IDLE_IOAT_CHANNEL
config I7300_IDLE
tristate "Intel chipset idle memory power saving driver"
select I7300_IDLE_IOAT_CHANNEL
- depends on X86_64 && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Enable memory power savings when idle with certain Intel server
chipsets. The chipset must have I/O AT support, such as the
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 965cfdb84ebc..c19f23267157 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -1270,8 +1270,14 @@ static int dv1394_mmap(struct file *file, struct vm_area_struct *vma)
struct video_card *video = file_to_video_card(file);
int retval = -EINVAL;
- /* serialize mmap */
- mutex_lock(&video->mtx);
+ /*
+ * We cannot use the blocking variant mutex_lock here because .mmap
+ * is called with mmap_sem held, while .ioctl, .read, .write acquire
+ * video->mtx and subsequently call copy_to/from_user which will
+ * grab mmap_sem in case of a page fault.
+ */
+ if (!mutex_trylock(&video->mtx))
+ return -EAGAIN;
if ( ! video_card_initialized(video) ) {
retval = do_dv1394_init_default(video);
diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c
index 8dd09d850419..237d0c9d69c6 100644
--- a/drivers/ieee1394/hosts.c
+++ b/drivers/ieee1394/hosts.c
@@ -155,11 +155,11 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
memcpy(&h->device, &nodemgr_dev_template_host, sizeof(h->device));
h->device.parent = dev;
set_dev_node(&h->device, dev_to_node(dev));
- snprintf(h->device.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
+ dev_set_name(&h->device, "fw-host%d", h->id);
h->host_dev.parent = &h->device;
h->host_dev.class = &hpsb_host_class;
- snprintf(h->host_dev.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
+ dev_set_name(&h->host_dev, "fw-host%d", h->id);
if (device_register(&h->device))
goto fail;
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 2376b729e876..9e39f73282ee 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -826,13 +826,11 @@ static struct node_entry *nodemgr_create_node(octlet_t guid,
memcpy(&ne->device, &nodemgr_dev_template_ne,
sizeof(ne->device));
ne->device.parent = &host->device;
- snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx",
- (unsigned long long)(ne->guid));
+ dev_set_name(&ne->device, "%016Lx", (unsigned long long)(ne->guid));
ne->node_dev.parent = &ne->device;
ne->node_dev.class = &nodemgr_ne_class;
- snprintf(ne->node_dev.bus_id, BUS_ID_SIZE, "%016Lx",
- (unsigned long long)(ne->guid));
+ dev_set_name(&ne->node_dev, "%016Lx", (unsigned long long)(ne->guid));
if (device_register(&ne->device))
goto fail_devreg;
@@ -932,13 +930,11 @@ static void nodemgr_register_device(struct node_entry *ne,
ud->device.parent = parent;
- snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u",
- ne->device.bus_id, ud->id);
+ dev_set_name(&ud->device, "%s-%u", dev_name(&ne->device), ud->id);
ud->unit_dev.parent = &ud->device;
ud->unit_dev.class = &nodemgr_ud_class;
- snprintf(ud->unit_dev.bus_id, BUS_ID_SIZE, "%s-%u",
- ne->device.bus_id, ud->id);
+ dev_set_name(&ud->unit_dev, "%s-%u", dev_name(&ne->device), ud->id);
if (device_register(&ud->device))
goto fail_devreg;
@@ -953,7 +949,7 @@ static void nodemgr_register_device(struct node_entry *ne,
fail_classdevreg:
device_unregister(&ud->device);
fail_devreg:
- HPSB_ERR("Failed to create unit %s", ud->device.bus_id);
+ HPSB_ERR("Failed to create unit %s", dev_name(&ud->device));
}
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 9f19ac492106..bf7e761c12b1 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -2268,7 +2268,8 @@ static ssize_t raw1394_write(struct file *file, const char __user * buffer,
return -EFAULT;
}
- mutex_lock(&fi->state_mutex);
+ if (!mutex_trylock(&fi->state_mutex))
+ return -EAGAIN;
switch (fi->state) {
case opened:
@@ -2548,7 +2549,8 @@ static int raw1394_mmap(struct file *file, struct vm_area_struct *vma)
struct file_info *fi = file->private_data;
int ret;
- mutex_lock(&fi->state_mutex);
+ if (!mutex_trylock(&fi->state_mutex))
+ return -EAGAIN;
if (fi->iso_state == RAW1394_ISO_INACTIVE)
ret = -EINVAL;
@@ -2669,7 +2671,8 @@ static long raw1394_ioctl(struct file *file, unsigned int cmd,
break;
}
- mutex_lock(&fi->state_mutex);
+ if (!mutex_trylock(&fi->state_mutex))
+ return -EAGAIN;
switch (fi->iso_state) {
case RAW1394_ISO_INACTIVE:
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index ecff98043589..160ef482712d 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev)
char *cp, *next;
unsigned fw_maj, fw_min, fw_mic;
- rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
- rtnl_unlock();
next = info.fw_version + 1;
cp = strsep(&next, ".");
@@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
- rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
- rtnl_unlock();
return sprintf(buf, "%s\n", info.fw_version);
}
@@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr,
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
- rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
- rtnl_unlock();
return sprintf(buf, "%s\n", info.driver);
}
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 3e4585c2318a..19661b2f0406 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -745,7 +745,6 @@ int iwch_post_zb_read(struct iwch_qp *qhp)
wqe->read.rdmaop = T3_READ_REQ;
wqe->read.reserved[0] = 0;
wqe->read.reserved[1] = 0;
- wqe->read.reserved[2] = 0;
wqe->read.rem_stag = cpu_to_be32(1);
wqe->read.rem_to = cpu_to_be64(1);
wqe->read.local_stag = cpu_to_be32(1);
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index cb55be04442c..757035ea246f 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -359,36 +359,48 @@ static void notify_port_conf_change(struct ehca_shca *shca, int port_num)
*old_attr = new_attr;
}
+/* replay modify_qp for sqps -- return 0 if all is well, 1 if AQP1 destroyed */
+static int replay_modify_qp(struct ehca_sport *sport)
+{
+ int aqp1_destroyed;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+
+ aqp1_destroyed = !sport->ibqp_sqp[IB_QPT_GSI];
+
+ if (sport->ibqp_sqp[IB_QPT_SMI])
+ ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]);
+ if (!aqp1_destroyed)
+ ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]);
+
+ spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+
+ return aqp1_destroyed;
+}
+
static void parse_ec(struct ehca_shca *shca, u64 eqe)
{
u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe);
u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe);
u8 spec_event;
struct ehca_sport *sport = &shca->sport[port - 1];
- unsigned long flags;
switch (ec) {
case 0x30: /* port availability change */
if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) {
- int suppress_event;
- /* replay modify_qp for sqps */
- spin_lock_irqsave(&sport->mod_sqp_lock, flags);
- suppress_event = !sport->ibqp_sqp[IB_QPT_GSI];
- if (sport->ibqp_sqp[IB_QPT_SMI])
- ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]);
- if (!suppress_event)
- ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]);
- spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
-
- /* AQP1 was destroyed, ignore this event */
- if (suppress_event)
- break;
+ /* only replay modify_qp calls in autodetect mode;
+ * if AQP1 was destroyed, the port is already down
+ * again and we can drop the event.
+ */
+ if (ehca_nr_ports < 0)
+ if (replay_modify_qp(sport))
+ break;
sport->port_state = IB_PORT_ACTIVE;
dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE,
"is active");
- ehca_query_sma_attr(shca, port,
- &sport->saved_attr);
+ ehca_query_sma_attr(shca, port, &sport->saved_attr);
} else {
sport->port_state = IB_PORT_DOWN;
dispatch_port_event(shca, port, IB_EVENT_PORT_ERR,
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 4d54b9f64567..9e05ee2db39b 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -860,6 +860,11 @@ static struct ehca_qp *internal_create_qp(
if (qp_type == IB_QPT_GSI) {
h_ret = ehca_define_sqp(shca, my_qp, init_attr);
if (h_ret != H_SUCCESS) {
+ kfree(my_qp->mod_qp_parm);
+ my_qp->mod_qp_parm = NULL;
+ /* the QP pointer is no longer valid */
+ shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] =
+ NULL;
ret = ehca2ib_return_code(h_ret);
goto create_qp_exit6;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index fc0f6d9e6030..2296832f94da 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -156,7 +156,7 @@ bail:
/**
* ipath_get_rwqe - copy the next RWQE into the QP's RWQE
* @qp: the QP
- * @wr_id_only: update wr_id only, not SGEs
+ * @wr_id_only: update qp->r_wr_id only, not qp->r_sge
*
* Return 0 if no RWQE is available, otherwise return 1.
*
@@ -173,8 +173,6 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
u32 tail;
int ret;
- qp->r_sge.sg_list = qp->r_sg_list;
-
if (qp->ibqp.srq) {
srq = to_isrq(qp->ibqp.srq);
handler = srq->ibsrq.event_handler;
@@ -206,8 +204,10 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
wqe = get_rwqe_ptr(rq, tail);
if (++tail >= rq->size)
tail = 0;
- } while (!wr_id_only && !ipath_init_sge(qp, wqe, &qp->r_len,
- &qp->r_sge));
+ if (wr_id_only)
+ break;
+ qp->r_sge.sg_list = qp->r_sg_list;
+ } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge));
qp->r_wr_id = wqe->wr_id;
wq->tail = tail;
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index 87f5c5a87b98..8e4d26d56a95 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -205,6 +205,7 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd,
goto err_mr;
mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key;
+ mr->umem = NULL;
return &mr->ibmr;
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index a2b04d62b1a4..aa1dc41f04c8 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -95,6 +95,10 @@ unsigned int wqm_quanta = 0x10000;
module_param(wqm_quanta, int, 0644);
MODULE_PARM_DESC(wqm_quanta, "WQM quanta");
+static unsigned int limit_maxrdreqsz;
+module_param(limit_maxrdreqsz, bool, 0644);
+MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes");
+
LIST_HEAD(nes_adapter_list);
static LIST_HEAD(nes_dev_list);
@@ -588,6 +592,18 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i
nesdev->nesadapter->port_count;
}
+ if ((limit_maxrdreqsz ||
+ ((nesdev->nesadapter->phy_type[0] == NES_PHY_TYPE_GLADIUS) &&
+ (hw_rev == NE020_REV1))) &&
+ (pcie_get_readrq(pcidev) > 256)) {
+ if (pcie_set_readrq(pcidev, 256))
+ printk(KERN_ERR PFX "Unable to set max read request"
+ " to 256 bytes\n");
+ else
+ nes_debug(NES_DBG_INIT, "Max read request size set"
+ " to 256 bytes\n");
+ }
+
tasklet_init(&nesdev->dpc_tasklet, nes_dpc, (unsigned long)nesdev);
/* bring up the Control QP */
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 610b9d859597..bc0b4de04450 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -40,6 +40,7 @@
#define NES_PHY_TYPE_ARGUS 4
#define NES_PHY_TYPE_PUMA_1G 5
#define NES_PHY_TYPE_PUMA_10G 6
+#define NES_PHY_TYPE_GLADIUS 7
#define NES_MULTICAST_PF_MAX 8
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 932e56fcf774..d36c9a0bf1bb 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -220,14 +220,14 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw,
if (nesqp->ibqp_state > IB_QPS_RTS)
return -EINVAL;
- spin_lock_irqsave(&nesqp->lock, flags);
+ spin_lock_irqsave(&nesqp->lock, flags);
head = nesqp->hwqp.sq_head;
qsize = nesqp->hwqp.sq_tail;
/* Check for SQ overflow */
if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) {
- spin_unlock_irqrestore(&nesqp->lock, flags);
+ spin_unlock_irqrestore(&nesqp->lock, flags);
return -EINVAL;
}
@@ -269,7 +269,7 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw,
nes_write32(nesdev->regs+NES_WQE_ALLOC,
(1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
- spin_unlock_irqrestore(&nesqp->lock, flags);
+ spin_unlock_irqrestore(&nesqp->lock, flags);
return 0;
}
@@ -349,7 +349,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
if (nesfmr->nesmr.pbls_used > nesadapter->free_4kpbl) {
spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
ret = -ENOMEM;
- goto failed_vpbl_alloc;
+ goto failed_vpbl_avail;
} else {
nesadapter->free_4kpbl -= nesfmr->nesmr.pbls_used;
}
@@ -357,7 +357,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
if (nesfmr->nesmr.pbls_used > nesadapter->free_256pbl) {
spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
ret = -ENOMEM;
- goto failed_vpbl_alloc;
+ goto failed_vpbl_avail;
} else {
nesadapter->free_256pbl -= nesfmr->nesmr.pbls_used;
}
@@ -391,14 +391,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
goto failed_vpbl_alloc;
}
- nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_KERNEL);
+ nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1;
+ nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_ATOMIC);
if (!nesfmr->root_vpbl.leaf_vpbl) {
spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
ret = -ENOMEM;
goto failed_leaf_vpbl_alloc;
}
- nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1;
nes_debug(NES_DBG_MR, "two level pbl, root_vpbl.pbl_vbase=%p"
" leaf_pbl_cnt=%d root_vpbl.leaf_vpbl=%p\n",
nesfmr->root_vpbl.pbl_vbase, nesfmr->leaf_pbl_cnt, nesfmr->root_vpbl.leaf_vpbl);
@@ -519,6 +519,16 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
nesfmr->root_vpbl.pbl_pbase);
failed_vpbl_alloc:
+ if (nesfmr->nesmr.pbls_used != 0) {
+ spin_lock_irqsave(&nesadapter->pbl_lock, flags);
+ if (nesfmr->nesmr.pbl_4k)
+ nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used;
+ else
+ nesadapter->free_256pbl += nesfmr->nesmr.pbls_used;
+ spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
+ }
+
+failed_vpbl_avail:
kfree(nesfmr);
failed_fmr_alloc:
@@ -534,18 +544,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
*/
static int nes_dealloc_fmr(struct ib_fmr *ibfmr)
{
+ unsigned long flags;
struct nes_mr *nesmr = to_nesmr_from_ibfmr(ibfmr);
struct nes_fmr *nesfmr = to_nesfmr(nesmr);
struct nes_vnic *nesvnic = to_nesvnic(ibfmr->device);
struct nes_device *nesdev = nesvnic->nesdev;
- struct nes_mr temp_nesmr = *nesmr;
+ struct nes_adapter *nesadapter = nesdev->nesadapter;
int i = 0;
- temp_nesmr.ibmw.device = ibfmr->device;
- temp_nesmr.ibmw.pd = ibfmr->pd;
- temp_nesmr.ibmw.rkey = ibfmr->rkey;
- temp_nesmr.ibmw.uobject = NULL;
-
/* free the resources */
if (nesfmr->leaf_pbl_cnt == 0) {
/* single PBL case */
@@ -561,8 +567,24 @@ static int nes_dealloc_fmr(struct ib_fmr *ibfmr)
pci_free_consistent(nesdev->pcidev, 8192, nesfmr->root_vpbl.pbl_vbase,
nesfmr->root_vpbl.pbl_pbase);
}
+ nesmr->ibmw.device = ibfmr->device;
+ nesmr->ibmw.pd = ibfmr->pd;
+ nesmr->ibmw.rkey = ibfmr->rkey;
+ nesmr->ibmw.uobject = NULL;
- return nes_dealloc_mw(&temp_nesmr.ibmw);
+ if (nesfmr->nesmr.pbls_used != 0) {
+ spin_lock_irqsave(&nesadapter->pbl_lock, flags);
+ if (nesfmr->nesmr.pbl_4k) {
+ nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used;
+ WARN_ON(nesadapter->free_4kpbl > nesadapter->max_4kpbl);
+ } else {
+ nesadapter->free_256pbl += nesfmr->nesmr.pbls_used;
+ WARN_ON(nesadapter->free_256pbl > nesadapter->max_256pbl);
+ }
+ spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
+ }
+
+ return nes_dealloc_mw(&nesmr->ibmw);
}
@@ -1595,7 +1617,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
nes_ucontext->mcrqf = req.mcrqf;
if (nes_ucontext->mcrqf) {
if (nes_ucontext->mcrqf & 0x80000000)
- nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 12 + (nes_ucontext->mcrqf & 0xf) - 1;
+ nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 28 + 2 * ((nes_ucontext->mcrqf & 0xf) - 1);
else if (nes_ucontext->mcrqf & 0x40000000)
nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff;
else
@@ -3212,7 +3234,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr,
if (nesqp->ibqp_state > IB_QPS_RTS)
return -EINVAL;
- spin_lock_irqsave(&nesqp->lock, flags);
+ spin_lock_irqsave(&nesqp->lock, flags);
head = nesqp->hwqp.sq_head;
@@ -3337,7 +3359,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr,
(counter << 24) | 0x00800000 | nesqp->hwqp.qp_id);
}
- spin_unlock_irqrestore(&nesqp->lock, flags);
+ spin_unlock_irqrestore(&nesqp->lock, flags);
if (err)
*bad_wr = ib_wr;
@@ -3368,7 +3390,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr,
if (nesqp->ibqp_state > IB_QPS_RTS)
return -EINVAL;
- spin_lock_irqsave(&nesqp->lock, flags);
+ spin_lock_irqsave(&nesqp->lock, flags);
head = nesqp->hwqp.rq_head;
@@ -3421,7 +3443,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr,
nes_write32(nesdev->regs+NES_WQE_ALLOC, (counter<<24) | nesqp->hwqp.qp_id);
}
- spin_unlock_irqrestore(&nesqp->lock, flags);
+ spin_unlock_irqrestore(&nesqp->lock, flags);
if (err)
*bad_wr = ib_wr;
@@ -3453,7 +3475,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
nes_debug(NES_DBG_CQ, "\n");
- spin_lock_irqsave(&nescq->lock, flags);
+ spin_lock_irqsave(&nescq->lock, flags);
head = nescq->hw_cq.cq_head;
cq_size = nescq->hw_cq.cq_size;
@@ -3562,7 +3584,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
nes_debug(NES_DBG_CQ, "Reporting %u completions for CQ%u.\n",
cqe_count, nescq->hw_cq.cq_number);
- spin_unlock_irqrestore(&nescq->lock, flags);
+ spin_unlock_irqrestore(&nescq->lock, flags);
return cqe_count;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index fddded7900d1..85257f6b9576 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -106,12 +106,13 @@ int ipoib_open(struct net_device *dev)
ipoib_dbg(priv, "bringing up interface\n");
- napi_enable(&priv->napi);
set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
if (ipoib_pkey_dev_delay_open(dev))
return 0;
+ napi_enable(&priv->napi);
+
if (ipoib_ib_dev_open(dev)) {
napi_disable(&priv->napi);
return -EINVAL;
@@ -546,6 +547,7 @@ static int path_rec_start(struct net_device *dev,
if (path->query_id < 0) {
ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id);
path->query = NULL;
+ complete(&path->done);
return path->query_id;
}
@@ -662,7 +664,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
skb_push(skb, sizeof *phdr);
__skb_queue_tail(&path->queue, skb);
- if (path_rec_start(dev, path)) {
+ if (!path->query && path_rec_start(dev, path)) {
spin_unlock_irqrestore(&priv->lock, flags);
path_free(dev, path);
return;
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 190147c79e79..3b90c5c924ec 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -148,6 +148,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
min_sectors = conf->array_sectors;
sector_div(min_sectors, PAGE_SIZE/sizeof(struct dev_info *));
+ if (min_sectors == 0)
+ min_sectors = 1;
/* min_sectors is the minimum spacing that will fit the hash
* table in one PAGE. This may be much smaller than needed.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9abf6ed16535..1b1d32694f6f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3884,7 +3884,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
if (mode == 0) {
mdk_rdev_t *rdev;
struct list_head *tmp;
- struct block_device *bdev;
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
@@ -3941,11 +3940,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
mddev->degraded = 0;
mddev->barriers_work = 0;
mddev->safemode = 0;
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- blkdev_ioctl(bdev, 0, BLKRRPART, 0);
- bdput(bdev);
- }
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
} else if (mddev->pers)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index da5129a24b18..970a96ef9b18 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1137,7 +1137,7 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
if (!enough(conf))
return -EINVAL;
- if (rdev->raid_disk)
+ if (rdev->raid_disk >= 0)
first = last = rdev->raid_disk;
if (rdev->saved_raid_disk >= 0 &&
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 5689d1f1d444..8557bf12cfb4 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -223,6 +223,8 @@ static void dvb_frontend_init(struct dvb_frontend *fe)
if (fe->ops.init)
fe->ops.init(fe);
if (fe->ops.tuner_ops.init) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.init(fe);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 3c13bcfa6385..62b68c291d99 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -261,7 +261,7 @@ config DVB_USB_DW2102
Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
and the TeVii S650.
-config DVB_USB_CINERGY_T2
+config DVB_USB_CINERGY_T2
tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
depends on DVB_USB
help
@@ -283,6 +283,7 @@ config DVB_USB_ANYSEE
config DVB_USB_DTV5100
tristate "AME DTV-5100 USB2.0 DVB-T support"
depends on DVB_USB
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
help
Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index cb0829c038ce..847d8fdd9ec4 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -31,13 +31,13 @@
#include "mc44s80x.h"
#endif
-int dvb_usb_af9015_debug;
+static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-int dvb_usb_af9015_remote;
+static int dvb_usb_af9015_remote;
module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
MODULE_PARM_DESC(remote, "select remote");
-int dvb_usb_af9015_dual_mode;
+static int dvb_usb_af9015_dual_mode;
module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644);
MODULE_PARM_DESC(dual_mode, "enable dual mode");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -46,7 +46,7 @@ static DEFINE_MUTEX(af9015_usb_mutex);
static struct af9015_config af9015_config;
static struct dvb_usb_device_properties af9015_properties[2];
-int af9015_properties_count = ARRAY_SIZE(af9015_properties);
+static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
static struct af9013_config af9015_af9013_config[] = {
{
@@ -549,7 +549,7 @@ static int af9015_eeprom_dump(struct dvb_usb_device *d)
return 0;
}
-int af9015_download_ir_table(struct dvb_usb_device *d)
+static int af9015_download_ir_table(struct dvb_usb_device *d)
{
int i, packets = 0, ret;
u16 addr = 0x9a56; /* ir-table start address */
@@ -999,7 +999,7 @@ static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
}
/* init 2nd I2C adapter */
-int af9015_i2c_init(struct dvb_usb_device *d)
+static int af9015_i2c_init(struct dvb_usb_device *d)
{
int ret;
struct af9015_state *state = d->priv;
@@ -1419,7 +1419,7 @@ static int af9015_usb_probe(struct usb_interface *intf,
return ret;
}
-void af9015_i2c_exit(struct dvb_usb_device *d)
+static void af9015_i2c_exit(struct dvb_usb_device *d)
{
struct af9015_state *state = d->priv;
deb_info("%s: \n", __func__);
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index 882e8a4b3681..6c3c97293316 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -27,7 +27,6 @@
#define DVB_USB_LOG_PREFIX "af9015"
#include "dvb-usb.h"
-extern int dvb_usb_af9015_debug;
#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args)
#define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args)
#define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args)
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index c786359fba03..cd2edbcaa097 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -46,7 +46,7 @@ module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-static struct mutex anysee_usb_mutex;
+static DEFINE_MUTEX(anysee_usb_mutex);
static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
u8 *rbuf, u8 rlen)
@@ -456,8 +456,6 @@ static int anysee_probe(struct usb_interface *intf,
struct usb_host_interface *alt;
int ret;
- mutex_init(&anysee_usb_mutex);
-
/* There is one interface with two alternate settings.
Alternate setting 0 is for bulk transfer.
Alternate setting 1 is for isochronous transfer.
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
index 5cef12a07f72..6fe71c6745eb 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
@@ -13,14 +13,14 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
{
int actlen,ret = -ENOMEM;
+ if (!d || wbuf == NULL || wlen == 0)
+ return -EINVAL;
+
if (d->props.generic_bulk_ctrl_endpoint == 0) {
err("endpoint for generic control not specified.");
return -EINVAL;
}
- if (wbuf == NULL || wlen == 0)
- return -EINVAL;
-
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
return ret;
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index 21c1060cf10e..692b68a9e73b 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -1187,7 +1187,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
if (tmp)
*status |= FE_HAS_SYNC | FE_HAS_LOCK;
- if (!*status & FE_HAS_SIGNAL) {
+ if (!(*status & FE_HAS_SIGNAL)) {
/* AGC lock */
ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp);
if (ret)
@@ -1196,7 +1196,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
*status |= FE_HAS_SIGNAL;
}
- if (!*status & FE_HAS_CARRIER) {
+ if (!(*status & FE_HAS_CARRIER)) {
/* CFO lock */
ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp);
if (ret)
@@ -1205,7 +1205,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
*status |= FE_HAS_CARRIER;
}
- if (!*status & FE_HAS_CARRIER) {
+ if (!(*status & FE_HAS_CARRIER)) {
/* SFOE lock */
ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp);
if (ret)
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 04cd7c04bdde..5189c4eb439f 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -355,6 +355,20 @@ config USB_SI470X
tristate "Silicon Labs Si470x FM Radio Receiver support"
depends on USB && VIDEO_V4L2
---help---
+ This is a driver for USB devices with the Silicon Labs SI470x
+ chip. Currently these devices are known to work:
+ - 10c4:818a: Silicon Labs USB FM Radio Reference Design
+ - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music)
+ - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+
+ Sound is provided by the ALSA USB Audio/MIDI driver. Therefore
+ if you don't want to use the device solely for RDS receiving,
+ it is recommended to also select SND_USB_AUDIO.
+
+ Please have a look at the documentation, especially on how
+ to redirect the audio stream from the radio to your sound device:
+ Documentation/video4linux/si470x.txt
+
Say Y here if you want to connect this type of radio to your
computer's USB port.
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 5920cd306975..3e1830293de5 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -4,6 +4,7 @@
* Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers:
* - Silicon Labs USB FM Radio Reference Design
* - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
+ * - KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
*
* Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net>
*
@@ -24,19 +25,6 @@
/*
- * User Notes:
- * - USB Audio is provided by the alsa snd_usb_audio module.
- * For listing you have to redirect the sound, for example using:
- * arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
- * - regarding module parameters in /sys/module/radio_si470x/parameters:
- * the contents of read-only files (0444) are not updated, even if
- * space, band and de are changed using private video controls
- * - increase tune_timeout, if you often get -EIO errors
- * - hw_freq_seek returns -EAGAIN, when timed out or band limit is reached
- */
-
-
-/*
* History:
* 2008-01-12 Tobias Lorenz <tobias.lorenz@gmx.net>
* Version 1.0.0
@@ -105,6 +93,9 @@
* - afc indication
* - more safety checks, let si470x_get_freq return errno
* - vidioc behavior corrected according to v4l2 spec
+ * 2008-10-20 Alexey Klimov <klimov.linux@gmail.com>
+ * - add support for KWorld USB FM Radio FM700
+ * - blacklisted KWorld radio in hid-core.c and hid-ids.h
*
* ToDo:
* - add firmware download/update support
@@ -145,6 +136,8 @@ static struct usb_device_id si470x_usb_driver_id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) },
/* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) },
+ /* KWorld USB FM Radio SnapMusic Mobile 700 (FM700) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
/* Terminating entry */
{ }
};
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index a8c068e1de1c..1740b9ebdcef 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1476,12 +1476,9 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp)
{
struct cafe_camera *cam;
- lock_kernel();
cam = cafe_find_dev(iminor(inode));
- if (cam == NULL) {
- unlock_kernel();
+ if (cam == NULL)
return -ENODEV;
- }
filp->private_data = cam;
mutex_lock(&cam->s_mutex);
@@ -1493,7 +1490,6 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp)
}
(cam->users)++;
mutex_unlock(&cam->s_mutex);
- unlock_kernel();
return 0;
}
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index bd5d9de5a008..e6ca4012b5f0 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -867,6 +867,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
case VIDIOC_STREAMON32:
case VIDIOC_STREAMOFF32:
case VIDIOC_G_PARM:
+ case VIDIOC_S_PARM:
case VIDIOC_G_STD:
case VIDIOC_S_STD:
case VIDIOC_G_TUNER:
@@ -885,6 +886,8 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
case VIDIOC_S_INPUT32:
case VIDIOC_TRY_FMT32:
case VIDIOC_S_HW_FREQ_SEEK:
+ case VIDIOC_ENUM_FRAMESIZES:
+ case VIDIOC_ENUM_FRAMEINTERVALS:
ret = do_video_ioctl(file, cmd, arg);
break;
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 7a1a7830a6b3..7874d9790a51 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -448,7 +448,14 @@ static int __devinit cx18_init_struct1(struct cx18 *cx)
mutex_init(&cx->gpio_lock);
spin_lock_init(&cx->lock);
- spin_lock_init(&cx->dma_reg_lock);
+
+ cx->work_queue = create_singlethread_workqueue(cx->name);
+ if (cx->work_queue == NULL) {
+ CX18_ERR("Could not create work queue\n");
+ return -1;
+ }
+
+ INIT_WORK(&cx->work, cx18_work_handler);
/* start counting open_id at 1 */
cx->open_id = 1;
@@ -581,10 +588,10 @@ static void cx18_load_and_init_modules(struct cx18 *cx)
#ifdef MODULE
/* load modules */
-#ifndef CONFIG_MEDIA_TUNER
+#ifdef CONFIG_MEDIA_TUNER_MODULE
hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER);
#endif
-#ifndef CONFIG_VIDEO_CS5345
+#ifdef CONFIG_VIDEO_CS5345_MODULE
hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345);
#endif
#endif
@@ -832,6 +839,7 @@ free_map:
free_mem:
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
free_workqueue:
+ destroy_workqueue(cx->work_queue);
err:
if (retval == 0)
retval = -ENODEV;
@@ -932,6 +940,9 @@ static void cx18_remove(struct pci_dev *pci_dev)
cx18_halt_firmware(cx);
+ flush_workqueue(cx->work_queue);
+ destroy_workqueue(cx->work_queue);
+
cx18_streams_cleanup(cx, 1);
exit_cx18_i2c(cx);
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index a4b1708fafe7..bbdd5f25041d 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -199,12 +199,15 @@ struct cx18_options {
#define CX18_F_S_APPL_IO 8 /* this stream is used read/written by an application */
/* per-cx18, i_flags */
-#define CX18_F_I_LOADED_FW 0 /* Loaded the firmware the first time */
-#define CX18_F_I_EOS 4 /* End of encoder stream reached */
-#define CX18_F_I_RADIO_USER 5 /* The radio tuner is selected */
-#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */
-#define CX18_F_I_INITED 21 /* set after first open */
-#define CX18_F_I_FAILED 22 /* set if first open failed */
+#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */
+#define CX18_F_I_EOS 4 /* End of encoder stream */
+#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */
+#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */
+#define CX18_F_I_HAVE_WORK 15 /* there is work to be done */
+#define CX18_F_I_WORK_HANDLER_DVB 18 /* work to be done for DVB */
+#define CX18_F_I_INITED 21 /* set after first open */
+#define CX18_F_I_FAILED 22 /* set if first open failed */
+#define CX18_F_I_WORK_INITED 23 /* worker thread initialized */
/* These are the VBI types as they appear in the embedded VBI private packets. */
#define CX18_SLICED_TYPE_TELETEXT_B (1)
@@ -402,8 +405,6 @@ struct cx18 {
spinlock_t lock; /* lock access to this struct */
int search_pack_header;
- spinlock_t dma_reg_lock; /* lock access to DMA engine registers */
-
int open_id; /* incremented each time an open occurs, used as
unique ID. Starts at 1, so 0 can be used as
uninitialized value in the stream->id. */
@@ -433,6 +434,9 @@ struct cx18 {
/* when the current DMA is finished this queue is woken up */
wait_queue_head_t dma_waitq;
+ struct workqueue_struct *work_queue;
+ struct work_struct work;
+
/* i2c */
struct i2c_adapter i2c_adap[2];
struct i2c_algo_bit_data i2c_algo[2];
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index afc694e7bdb2..4542e2e5e3d7 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -23,6 +23,8 @@
#include "cx18-dvb.h"
#include "cx18-io.h"
#include "cx18-streams.h"
+#include "cx18-queue.h"
+#include "cx18-scb.h"
#include "cx18-cards.h"
#include "s5h1409.h"
#include "mxl5005s.h"
@@ -300,3 +302,24 @@ static int dvb_register(struct cx18_stream *stream)
return ret;
}
+
+void cx18_dvb_work_handler(struct cx18 *cx)
+{
+ struct cx18_buffer *buf;
+ struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_TS];
+
+ while ((buf = cx18_dequeue(s, &s->q_full)) != NULL) {
+ if (s->dvb.enabled)
+ dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
+ buf->bytesused);
+
+ cx18_enqueue(s, buf, &s->q_free);
+ cx18_buf_sync_for_device(s, buf);
+ if (s->handle == CX18_INVALID_TASK_HANDLE) /* FIXME: improve */
+ continue;
+
+ cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ 1, buf->id, s->buf_size);
+ }
+}
diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h
index bf8d8f6f5455..bbdcefc87f28 100644
--- a/drivers/media/video/cx18/cx18-dvb.h
+++ b/drivers/media/video/cx18/cx18-dvb.h
@@ -23,3 +23,4 @@
int cx18_dvb_register(struct cx18_stream *stream);
void cx18_dvb_unregister(struct cx18_stream *stream);
+void cx18_dvb_work_handler(struct cx18 *cx);
diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c
index 700ab9439c16..220fae8d4ad7 100644
--- a/drivers/media/video/cx18/cx18-io.c
+++ b/drivers/media/video/cx18/cx18-io.c
@@ -88,6 +88,19 @@ void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr)
cx18_log_write_retries(cx, i, addr);
}
+void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
+ u32 eval, u32 mask)
+{
+ int i;
+ eval &= mask;
+ for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) {
+ cx18_writel_noretry(cx, val, addr);
+ if (eval == (cx18_readl_noretry(cx, addr) & mask))
+ break;
+ }
+ cx18_log_write_retries(cx, i, addr);
+}
+
void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr)
{
int i;
@@ -218,7 +231,7 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count)
void cx18_sw1_irq_enable(struct cx18 *cx, u32 val)
{
u32 r;
- cx18_write_reg(cx, val, SW1_INT_STATUS);
+ cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val);
r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI);
}
@@ -233,7 +246,7 @@ void cx18_sw1_irq_disable(struct cx18 *cx, u32 val)
void cx18_sw2_irq_enable(struct cx18 *cx, u32 val)
{
u32 r;
- cx18_write_reg(cx, val, SW2_INT_STATUS);
+ cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val);
r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI);
}
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
index 287a5e8bf67b..425244453ea7 100644
--- a/drivers/media/video/cx18/cx18-io.h
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -133,6 +133,8 @@ static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr)
cx18_writel_noretry(cx, val, addr);
}
+void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
+ u32 eval, u32 mask);
static inline
void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr)
@@ -271,6 +273,21 @@ static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg)
cx18_write_reg_noretry(cx, val, reg);
}
+static inline void _cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg,
+ u32 eval, u32 mask)
+{
+ _cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask);
+}
+
+static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg,
+ u32 eval, u32 mask)
+{
+ if (cx18_retry_mmio)
+ _cx18_write_reg_expect(cx, val, reg, eval, mask);
+ else
+ cx18_write_reg_noretry(cx, val, reg);
+}
+
static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg)
{
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index 360330f5463f..5fbfbd0f1493 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -29,8 +29,20 @@
#include "cx18-mailbox.h"
#include "cx18-vbi.h"
#include "cx18-scb.h"
+#include "cx18-dvb.h"
-#define DMA_MAGIC_COOKIE 0x000001fe
+void cx18_work_handler(struct work_struct *work)
+{
+ struct cx18 *cx = container_of(work, struct cx18, work);
+ if (test_and_clear_bit(CX18_F_I_WORK_INITED, &cx->i_flags)) {
+ struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
+ /* This thread must use the FIFO scheduler as it
+ * is realtime sensitive. */
+ sched_setscheduler(current, SCHED_FIFO, &param);
+ }
+ if (test_and_clear_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags))
+ cx18_dvb_work_handler(cx);
+}
static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
{
@@ -67,17 +79,11 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
if (buf) {
cx18_buf_sync_for_cpu(s, buf);
if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) {
- /* process the buffer here */
- CX18_DEBUG_HI_DMA("TS recv and sent bytesused=%d\n",
- buf->bytesused);
-
- dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
+ CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n",
buf->bytesused);
- cx18_buf_sync_for_device(s, buf);
- cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
- 1, buf->id, s->buf_size);
+ set_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags);
+ set_bit(CX18_F_I_HAVE_WORK, &cx->i_flags);
} else
set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
} else {
@@ -109,7 +115,7 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb)
CX18_INFO("FW version: %s\n", p - 1);
}
-static void hpu_cmd(struct cx18 *cx, u32 sw1)
+static void epu_cmd(struct cx18 *cx, u32 sw1)
{
struct cx18_mailbox mb;
@@ -125,12 +131,31 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1)
epu_debug(cx, &mb);
break;
default:
- CX18_WARN("Unexpected mailbox command %08x\n", mb.cmd);
+ CX18_WARN("Unknown CPU_TO_EPU mailbox command %#08x\n",
+ mb.cmd);
break;
}
}
- if (sw1 & (IRQ_APU_TO_EPU | IRQ_HPU_TO_EPU))
- CX18_WARN("Unexpected interrupt %08x\n", sw1);
+
+ if (sw1 & IRQ_APU_TO_EPU) {
+ cx18_memcpy_fromio(cx, &mb, &cx->scb->apu2epu_mb, sizeof(mb));
+ CX18_WARN("Unknown APU_TO_EPU mailbox command %#08x\n", mb.cmd);
+ }
+
+ if (sw1 & IRQ_HPU_TO_EPU) {
+ cx18_memcpy_fromio(cx, &mb, &cx->scb->hpu2epu_mb, sizeof(mb));
+ CX18_WARN("Unknown HPU_TO_EPU mailbox command %#08x\n", mb.cmd);
+ }
+}
+
+static void xpu_ack(struct cx18 *cx, u32 sw2)
+{
+ if (sw2 & IRQ_CPU_TO_EPU_ACK)
+ wake_up(&cx->mb_cpu_waitq);
+ if (sw2 & IRQ_APU_TO_EPU_ACK)
+ wake_up(&cx->mb_apu_waitq);
+ if (sw2 & IRQ_HPU_TO_EPU_ACK)
+ wake_up(&cx->mb_hpu_waitq);
}
irqreturn_t cx18_irq_handler(int irq, void *dev_id)
@@ -140,43 +165,36 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
u32 sw2, sw2_mask;
u32 hw2, hw2_mask;
- spin_lock(&cx->dma_reg_lock);
-
+ sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
+ sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask;
+ sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
+ sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask;
hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI);
hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask;
- sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK;
- sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask;
- sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU;
- sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask;
- cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS);
- cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS);
- cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS);
+ if (sw1)
+ cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1);
+ if (sw2)
+ cx18_write_reg_expect(cx, sw2, SW2_INT_STATUS, ~sw2, sw2);
+ if (hw2)
+ cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2);
if (sw1 || sw2 || hw2)
CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2);
/* To do: interrupt-based I2C handling
- if (hw2 & 0x00c00000) {
+ if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) {
}
*/
- if (sw2) {
- if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) |
- cx18_readl(cx, &cx->scb->cpu2epu_irq_ack)))
- wake_up(&cx->mb_cpu_waitq);
- if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) |
- cx18_readl(cx, &cx->scb->apu2epu_irq_ack)))
- wake_up(&cx->mb_apu_waitq);
- if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack))
- wake_up(&cx->mb_epu_waitq);
- if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack))
- wake_up(&cx->mb_hpu_waitq);
- }
+ if (sw2)
+ xpu_ack(cx, sw2);
if (sw1)
- hpu_cmd(cx, sw1);
- spin_unlock(&cx->dma_reg_lock);
+ epu_cmd(cx, sw1);
+
+ if (test_and_clear_bit(CX18_F_I_HAVE_WORK, &cx->i_flags))
+ queue_work(cx->work_queue, &cx->work);
- return (hw2 | sw1 | sw2) ? IRQ_HANDLED : IRQ_NONE;
+ return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE;
}
diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h
index 379f704f5cba..6173ca3bc9e4 100644
--- a/drivers/media/video/cx18/cx18-irq.h
+++ b/drivers/media/video/cx18/cx18-irq.h
@@ -32,6 +32,4 @@
irqreturn_t cx18_irq_handler(int irq, void *dev_id);
-void cx18_irq_work_handler(struct work_struct *work);
-void cx18_dma_stream_dec_prepare(struct cx18_stream *s, u32 offset, int lock);
-void cx18_unfinished_dma(unsigned long arg);
+void cx18_work_handler(struct work_struct *work);
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 9d18dd22de76..acff7dfb60df 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -83,7 +83,7 @@ static const struct cx18_api_info api_info[] = {
API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0),
API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST),
API_ENTRY(CPU, CX18_APU_RESETAI, API_FAST),
- API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, 0),
+ API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, API_SLOW),
API_ENTRY(0, 0, 0),
};
@@ -176,7 +176,7 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
cx18_setup_page(cx, SCB_OFFSET);
cx18_write_sync(cx, mb->request, &ack_mb->ack);
- cx18_write_reg(cx, ack_irq, SW2_INT_SET);
+ cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq);
return 0;
}
@@ -225,7 +225,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
}
if (info->flags & API_FAST)
timeout /= 2;
- cx18_write_reg(cx, irq, SW1_INT_SET);
+ cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq);
while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request)
&& cnt < 660) {
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index a33ba04a2686..174682c2582f 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -88,15 +88,13 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
if (buf->id != id)
continue;
+
buf->bytesused = bytesused;
- /* the transport buffers are handled differently,
- they are not moved to the full queue */
- if (s->type != CX18_ENC_STREAM_TYPE_TS) {
- atomic_dec(&s->q_free.buffers);
- atomic_inc(&s->q_full.buffers);
- s->q_full.bytesused += buf->bytesused;
- list_move_tail(&buf->list, &s->q_full.list);
- }
+ atomic_dec(&s->q_free.buffers);
+ atomic_inc(&s->q_full.buffers);
+ s->q_full.bytesused += buf->bytesused;
+ list_move_tail(&buf->list, &s->q_full.list);
+
spin_unlock(&s->qlock);
return buf;
}
diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h
index 86b4cb15d163..594713bbed68 100644
--- a/drivers/media/video/cx18/cx18-scb.h
+++ b/drivers/media/video/cx18/cx18-scb.h
@@ -128,22 +128,22 @@ struct cx18_scb {
u32 apu2cpu_irq;
/* Value to write to register SW2 register set (0xC7003140) after the
command is cleared */
- u32 apu2cpu_irq_ack;
+ u32 cpu2apu_irq_ack;
u32 reserved2[13];
u32 hpu2cpu_mb_offset;
u32 hpu2cpu_irq;
- u32 hpu2cpu_irq_ack;
+ u32 cpu2hpu_irq_ack;
u32 reserved3[13];
u32 ppu2cpu_mb_offset;
u32 ppu2cpu_irq;
- u32 ppu2cpu_irq_ack;
+ u32 cpu2ppu_irq_ack;
u32 reserved4[13];
u32 epu2cpu_mb_offset;
u32 epu2cpu_irq;
- u32 epu2cpu_irq_ack;
+ u32 cpu2epu_irq_ack;
u32 reserved5[13];
u32 reserved6[8];
@@ -153,22 +153,22 @@ struct cx18_scb {
u32 reserved11[7];
u32 cpu2apu_mb_offset;
u32 cpu2apu_irq;
- u32 cpu2apu_irq_ack;
+ u32 apu2cpu_irq_ack;
u32 reserved12[13];
u32 hpu2apu_mb_offset;
u32 hpu2apu_irq;
- u32 hpu2apu_irq_ack;
+ u32 apu2hpu_irq_ack;
u32 reserved13[13];
u32 ppu2apu_mb_offset;
u32 ppu2apu_irq;
- u32 ppu2apu_irq_ack;
+ u32 apu2ppu_irq_ack;
u32 reserved14[13];
u32 epu2apu_mb_offset;
u32 epu2apu_irq;
- u32 epu2apu_irq_ack;
+ u32 apu2epu_irq_ack;
u32 reserved15[13];
u32 reserved16[8];
@@ -178,22 +178,22 @@ struct cx18_scb {
u32 reserved21[7];
u32 cpu2hpu_mb_offset;
u32 cpu2hpu_irq;
- u32 cpu2hpu_irq_ack;
+ u32 hpu2cpu_irq_ack;
u32 reserved22[13];
u32 apu2hpu_mb_offset;
u32 apu2hpu_irq;
- u32 apu2hpu_irq_ack;
+ u32 hpu2apu_irq_ack;
u32 reserved23[13];
u32 ppu2hpu_mb_offset;
u32 ppu2hpu_irq;
- u32 ppu2hpu_irq_ack;
+ u32 hpu2ppu_irq_ack;
u32 reserved24[13];
u32 epu2hpu_mb_offset;
u32 epu2hpu_irq;
- u32 epu2hpu_irq_ack;
+ u32 hpu2epu_irq_ack;
u32 reserved25[13];
u32 reserved26[8];
@@ -203,22 +203,22 @@ struct cx18_scb {
u32 reserved31[7];
u32 cpu2ppu_mb_offset;
u32 cpu2ppu_irq;
- u32 cpu2ppu_irq_ack;
+ u32 ppu2cpu_irq_ack;
u32 reserved32[13];
u32 apu2ppu_mb_offset;
u32 apu2ppu_irq;
- u32 apu2ppu_irq_ack;
+ u32 ppu2apu_irq_ack;
u32 reserved33[13];
u32 hpu2ppu_mb_offset;
u32 hpu2ppu_irq;
- u32 hpu2ppu_irq_ack;
+ u32 ppu2hpu_irq_ack;
u32 reserved34[13];
u32 epu2ppu_mb_offset;
u32 epu2ppu_irq;
- u32 epu2ppu_irq_ack;
+ u32 ppu2epu_irq_ack;
u32 reserved35[13];
u32 reserved36[8];
@@ -228,22 +228,22 @@ struct cx18_scb {
u32 reserved41[7];
u32 cpu2epu_mb_offset;
u32 cpu2epu_irq;
- u32 cpu2epu_irq_ack;
+ u32 epu2cpu_irq_ack;
u32 reserved42[13];
u32 apu2epu_mb_offset;
u32 apu2epu_irq;
- u32 apu2epu_irq_ack;
+ u32 epu2apu_irq_ack;
u32 reserved43[13];
u32 hpu2epu_mb_offset;
u32 hpu2epu_irq;
- u32 hpu2epu_irq_ack;
+ u32 epu2hpu_irq_ack;
u32 reserved44[13];
u32 ppu2epu_mb_offset;
u32 ppu2epu_irq;
- u32 ppu2epu_irq_ack;
+ u32 epu2ppu_irq_ack;
u32 reserved45[13];
u32 reserved46[8];
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 078be6319556..d3ae5b4dfca7 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1078,7 +1078,7 @@ static int mpeg_open(struct inode *inode, struct file *file)
}
}
- if (blackbird_initialize_codec(dev) < 0) {
+ if (!atomic_read(&dev->core->mpeg_users) && blackbird_initialize_codec(dev) < 0) {
if (drv)
drv->request_release(drv);
unlock_kernel();
@@ -1109,6 +1109,8 @@ static int mpeg_open(struct inode *inode, struct file *file)
fh->mpegq.field);
unlock_kernel();
+ atomic_inc(&dev->core->mpeg_users);
+
return 0;
}
@@ -1118,7 +1120,7 @@ static int mpeg_release(struct inode *inode, struct file *file)
struct cx8802_dev *dev = fh->dev;
struct cx8802_driver *drv = NULL;
- if (dev->mpeg_active)
+ if (dev->mpeg_active && atomic_read(&dev->core->mpeg_users) == 1)
blackbird_stop_codec(dev);
cx8802_cancel_buffers(fh->dev);
@@ -1138,6 +1140,8 @@ static int mpeg_release(struct inode *inode, struct file *file)
if (drv)
drv->request_release(drv);
+ atomic_dec(&dev->core->mpeg_users);
+
return 0;
}
@@ -1158,6 +1162,10 @@ static unsigned int
mpeg_poll(struct file *file, struct poll_table_struct *wait)
{
struct cx8802_fh *fh = file->private_data;
+ struct cx8802_dev *dev = fh->dev;
+
+ if (!dev->mpeg_active)
+ blackbird_start_codec(file, fh);
return videobuf_poll_stream(file, &fh->mpegq, wait);
}
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index cf6c30d4e545..309ca5e68063 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -598,6 +598,11 @@ static int dvb_register(struct cx8802_dev *dev)
struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
int mfe_shared = 0; /* bus not shared by default */
+ if (0 != core->i2c_rc) {
+ printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
+ goto frontend_detach;
+ }
+
/* Get the first frontend */
fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
if (!fe0)
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index a1c435b4b1cd..3ebdcd1d83f8 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -769,10 +769,6 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev,
struct cx8802_dev *dev;
struct cx88_core *core;
int err;
-#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
- struct videobuf_dvb_frontend *demod;
- int i;
-#endif
/* general setup */
core = cx88_core_get(pci_dev);
@@ -803,15 +799,21 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev,
mutex_init(&dev->frontends.lock);
INIT_LIST_HEAD(&dev->frontends.felist);
- if (core->board.num_frontends)
- printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends);
-
- for (i = 1; i <= core->board.num_frontends; i++) {
- demod = videobuf_dvb_alloc_frontend(&dev->frontends, i);
- if(demod == NULL) {
- printk(KERN_ERR "%s() failed to alloc\n", __func__);
- err = -ENOMEM;
- goto fail_free;
+ if (core->board.num_frontends) {
+ struct videobuf_dvb_frontend *fe;
+ int i;
+
+ printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
+ core->board.num_frontends);
+ for (i = 1; i <= core->board.num_frontends; i++) {
+ fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
+ if(fe == NULL) {
+ printk(KERN_ERR "%s() failed to alloc\n",
+ __func__);
+ videobuf_dvb_dealloc_frontends(&dev->frontends);
+ err = -ENOMEM;
+ goto fail_free;
+ }
}
}
#endif
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 61265fd04d56..b96ce991d968 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1216,8 +1216,12 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
struct cx8800_fh *fh = priv;
struct cx8800_dev *dev = fh->dev;
- if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE))
+ /* We should remember that this driver also supports teletext, */
+ /* so we have to test if the v4l2_buf_type is VBI capture data. */
+ if (unlikely((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+ (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)))
return -EINVAL;
+
if (unlikely(i != fh->type))
return -EINVAL;
@@ -1232,8 +1236,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
struct cx8800_dev *dev = fh->dev;
int err, res;
- if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+ (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))
return -EINVAL;
+
if (i != fh->type)
return -EINVAL;
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 76207c2856b7..f4240965be32 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -352,6 +352,7 @@ struct cx88_core {
/* various v4l controls */
u32 freq;
atomic_t users;
+ atomic_t mpeg_users;
/* cx88-video needs to access cx8802 for hybrid tuner pll access. */
struct cx8802_dev *dvbdev;
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 4d0817471c9f..6b557c057fac 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -3,16 +3,16 @@ menuconfig USB_GSPCA
depends on VIDEO_V4L2
default m
---help---
- Say Y here if you want to enable selecting webcams based
- on the GSPCA framework.
+ Say Y here if you want to enable selecting webcams based
+ on the GSPCA framework.
- See <file:Documentation/video4linux/gspca.txt> for more info.
+ See <file:Documentation/video4linux/gspca.txt> for more info.
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" to use this driver.
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" to use this driver.
- To compile this driver as modules, choose M here: the
- modules will be called gspca_main.
+ To compile this driver as modules, choose M here: the
+ modules will be called gspca_main.
if USB_GSPCA && VIDEO_V4L2
@@ -23,190 +23,190 @@ config USB_GSPCA_CONEX
tristate "Conexant Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the Conexant chip.
+ Say Y here if you want support for cameras based on the Conexant chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_conex.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_conex.
config USB_GSPCA_ETOMS
tristate "Etoms USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the Etoms chip.
+ Say Y here if you want support for cameras based on the Etoms chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_etoms.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_etoms.
config USB_GSPCA_FINEPIX
tristate "Fujifilm FinePix USB V4L2 driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the FinePix chip.
+ Say Y here if you want support for cameras based on the FinePix chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_finepix.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_finepix.
config USB_GSPCA_MARS
tristate "Mars USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the Mars chip.
+ Say Y here if you want support for cameras based on the Mars chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_mars.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_mars.
config USB_GSPCA_OV519
tristate "OV519 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the OV519 chip.
+ Say Y here if you want support for cameras based on the OV519 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_ov519.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_ov519.
config USB_GSPCA_PAC207
tristate "Pixart PAC207 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the PAC207 chip.
+ Say Y here if you want support for cameras based on the PAC207 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_pac207.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_pac207.
config USB_GSPCA_PAC7311
tristate "Pixart PAC7311 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the PAC7311 chip.
+ Say Y here if you want support for cameras based on the PAC7311 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_pac7311.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_pac7311.
config USB_GSPCA_SONIXB
tristate "SN9C102 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SONIXB chip.
+ Say Y here if you want support for cameras based on the SONIXB chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_sonixb.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_sonixb.
config USB_GSPCA_SONIXJ
tristate "SONIX JPEG USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SONIXJ chip.
+ Say Y here if you want support for cameras based on the SONIXJ chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_sonixj
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_sonixj
config USB_GSPCA_SPCA500
tristate "SPCA500 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SPCA500 chip.
+ Say Y here if you want support for cameras based on the SPCA500 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca500.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca500.
config USB_GSPCA_SPCA501
tristate "SPCA501 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SPCA501 chip.
+ Say Y here if you want support for cameras based on the SPCA501 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca501.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca501.
config USB_GSPCA_SPCA505
tristate "SPCA505 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SPCA505 chip.
+ Say Y here if you want support for cameras based on the SPCA505 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca505.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca505.
config USB_GSPCA_SPCA506
tristate "SPCA506 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SPCA506 chip.
+ Say Y here if you want support for cameras based on the SPCA506 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca506.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca506.
config USB_GSPCA_SPCA508
tristate "SPCA508 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SPCA508 chip.
+ Say Y here if you want support for cameras based on the SPCA508 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca508.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca508.
config USB_GSPCA_SPCA561
tristate "SPCA561 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the SPCA561 chip.
+ Say Y here if you want support for cameras based on the SPCA561 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca561.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca561.
config USB_GSPCA_STK014
tristate "Syntek DV4000 (STK014) USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the STK014 chip.
+ Say Y here if you want support for cameras based on the STK014 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_stk014.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_stk014.
config USB_GSPCA_SUNPLUS
tristate "SUNPLUS USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the Sunplus
- SPCA504(abc) SPCA533 SPCA536 chips.
+ Say Y here if you want support for cameras based on the Sunplus
+ SPCA504(abc) SPCA533 SPCA536 chips.
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca5xx.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca5xx.
config USB_GSPCA_T613
tristate "T613 (JPEG Compliance) USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the T613 chip.
+ Say Y here if you want support for cameras based on the T613 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_t613.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_t613.
config USB_GSPCA_TV8532
tristate "TV8532 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the TV8531 chip.
+ Say Y here if you want support for cameras based on the TV8531 chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_tv8532.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_tv8532.
config USB_GSPCA_VC032X
tristate "VC032X USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the VC032X chip.
+ Say Y here if you want support for cameras based on the VC032X chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_vc032x.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_vc032x.
config USB_GSPCA_ZC3XX
- tristate "VC3xx USB Camera Driver"
+ tristate "ZC3XX USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the ZC3XX chip.
+ Say Y here if you want support for cameras based on the ZC3XX chip.
- To compile this driver as a module, choose M here: the
- module will be called gspca_zc3xx.
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_zc3xx.
endif
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index d0a4451dc46f..8b3101d347c3 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -2266,7 +2266,7 @@ static const struct usb_action hdcs2020b_NoFliker[] = {
{}
};
-static const struct usb_action hv7131bxx_Initial[] = {
+static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -2290,7 +2290,7 @@ static const struct usb_action hv7131bxx_Initial[] = {
{0xaa, 0x14, 0x0001},
{0xaa, 0x15, 0x00e8},
{0xaa, 0x16, 0x0002},
- {0xaa, 0x17, 0x0086},
+ {0xaa, 0x17, 0x0086}, /* 00,17,88,aa */
{0xaa, 0x31, 0x0038},
{0xaa, 0x32, 0x0038},
{0xaa, 0x33, 0x0038},
@@ -2309,7 +2309,7 @@ static const struct usb_action hv7131bxx_Initial[] = {
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xaa, 0x02, 0x0080}, /* {0xaa, 0x02, 0x0090}; */
+ {0xaa, 0x02, 0x0090}, /* 00,02,80,aa */
{0xa1, 0x01, 0x0002},
{0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
{0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
@@ -2374,7 +2374,7 @@ static const struct usb_action hv7131bxx_Initial[] = {
{}
};
-static const struct usb_action hv7131bxx_InitialScale[] = {
+static const struct usb_action hv7131bxx_InitialScale[] = { /* 640x480*/
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -6388,6 +6388,8 @@ static void setbrightness(struct gspca_dev *gspca_dev)
/*fixme: is it really write to 011d and 018d for all other sensors? */
brightness = sd->brightness;
reg_w(gspca_dev->dev, brightness, 0x011d);
+ if (sd->sensor == SENSOR_HV7131B)
+ return;
if (brightness < 0x70)
brightness += 0x10;
else
@@ -6529,6 +6531,7 @@ static void setquality(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
case SENSOR_GC0305:
+ case SENSOR_HV7131B:
case SENSOR_OV7620:
case SENSOR_PO2030:
return;
@@ -7209,7 +7212,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
zc3_init = init_tb[(int) sd->sensor][mode];
switch (sd->sensor) {
- case SENSOR_HV7131B:
case SENSOR_HV7131C:
zcxx_probeSensor(gspca_dev);
break;
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index 0069898bddab..c46bfb1569e3 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_IVTV
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
- depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && PCI && I2C
depends on INPUT # due to VIDEO_IR
select I2C_ALGOBIT
select VIDEO_IR
@@ -12,7 +12,6 @@ config VIDEO_IVTV
select VIDEO_SAA711X
select VIDEO_SAA717X
select VIDEO_SAA7127
- select VIDEO_TVAUDIO
select VIDEO_CS53L32A
select VIDEO_M52790
select VIDEO_WM8775
@@ -32,7 +31,7 @@ config VIDEO_IVTV
config VIDEO_FB_IVTV
tristate "Conexant cx23415 framebuffer support"
- depends on VIDEO_IVTV && FB && EXPERIMENTAL
+ depends on VIDEO_IVTV && FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index d36485023b68..b69cc1d55e5b 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -875,43 +875,43 @@ static void ivtv_load_and_init_modules(struct ivtv *itv)
#ifdef MODULE
/* load modules */
-#ifndef CONFIG_MEDIA_TUNER
+#ifdef CONFIG_MEDIA_TUNER_MODULE
hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER);
#endif
-#ifndef CONFIG_VIDEO_CX25840
+#ifdef CONFIG_VIDEO_CX25840_MODULE
hw = ivtv_request_module(itv, hw, "cx25840", IVTV_HW_CX25840);
#endif
-#ifndef CONFIG_VIDEO_SAA711X
+#ifdef CONFIG_VIDEO_SAA711X_MODULE
hw = ivtv_request_module(itv, hw, "saa7115", IVTV_HW_SAA711X);
#endif
-#ifndef CONFIG_VIDEO_SAA7127
+#ifdef CONFIG_VIDEO_SAA7127_MODULE
hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127);
#endif
-#ifndef CONFIG_VIDEO_SAA717X
+#ifdef CONFIG_VIDEO_SAA717X_MODULE
hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X);
#endif
-#ifndef CONFIG_VIDEO_UPD64031A
+#ifdef CONFIG_VIDEO_UPD64031A_MODULE
hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A);
#endif
-#ifndef CONFIG_VIDEO_UPD64083
+#ifdef CONFIG_VIDEO_UPD64083_MODULE
hw = ivtv_request_module(itv, hw, "upd64083", IVTV_HW_UPD6408X);
#endif
-#ifndef CONFIG_VIDEO_MSP3400
+#ifdef CONFIG_VIDEO_MSP3400_MODULE
hw = ivtv_request_module(itv, hw, "msp3400", IVTV_HW_MSP34XX);
#endif
-#ifndef CONFIG_VIDEO_VP27SMPX
+#ifdef CONFIG_VIDEO_VP27SMPX_MODULE
hw = ivtv_request_module(itv, hw, "vp27smpx", IVTV_HW_VP27SMPX);
#endif
-#ifndef CONFIG_VIDEO_WM8775
+#ifdef CONFIG_VIDEO_WM8775_MODULE
hw = ivtv_request_module(itv, hw, "wm8775", IVTV_HW_WM8775);
#endif
-#ifndef CONFIG_VIDEO_WM8739
+#ifdef CONFIG_VIDEO_WM8739_MODULE
hw = ivtv_request_module(itv, hw, "wm8739", IVTV_HW_WM8739);
#endif
-#ifndef CONFIG_VIDEO_CS53L32A
+#ifdef CONFIG_VIDEO_CS53L32A_MODULE
hw = ivtv_request_module(itv, hw, "cs53l32a", IVTV_HW_CS53L32A);
#endif
-#ifndef CONFIG_VIDEO_M52790
+#ifdef CONFIG_VIDEO_M52790_MODULE
hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790);
#endif
#endif
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index adf2ba79496a..37860698f782 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -47,7 +47,7 @@ module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */
-#define SAA7110_MAX_OUTPUT 0 /* its a decoder only */
+#define SAA7110_MAX_OUTPUT 1 /* 1 YUV */
#define SAA7110_NR_REG 0x35
@@ -327,7 +327,7 @@ saa7110_command (struct i2c_client *client,
case DECODER_SET_INPUT:
v = *(int *) arg;
- if (v < 0 || v > SAA7110_MAX_INPUT) {
+ if (v < 0 || v >= SAA7110_MAX_INPUT) {
v4l_dbg(1, debug, client, "input=%d not available\n", v);
return -EINVAL;
}
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 249184452949..dfbe08a9ad9b 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -941,7 +941,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
dev->name,(unsigned long long)pci_resource_start(pci_dev,0));
goto fail1;
}
- dev->lmmio = ioremap(pci_resource_start(pci_dev,0), 0x1000);
+ dev->lmmio = ioremap(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
dev->bmmio = (__u8 __iomem *)dev->lmmio;
if (NULL == dev->lmmio) {
err = -EIO;
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
index 28421d386f1e..c710bcd1df48 100644
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -3695,7 +3695,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
unsigned char video_ep = 0;
if (debug >= 1)
- dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum);
+ dev_info(&dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum);
/* We don't handle multi-config cameras */
if (dev->descriptor.bNumConfigurations != 1)
@@ -3746,7 +3746,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */
break;
}
- dev_info(&uvd->dev->dev,
+ dev_info(&dev->dev,
"%s USB camera found (model %d, rev. 0x%04x)\n",
brand, model, le16_to_cpu(dev->descriptor.bcdDevice));
} while (0);
@@ -3754,7 +3754,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
/* Validate found interface: must have one ISO endpoint */
nas = intf->num_altsetting;
if (debug > 0)
- dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n",
+ dev_info(&dev->dev, "Number of alternate settings=%d.\n",
nas);
if (nas < 2) {
err("Too few alternate settings for this camera!");
@@ -3799,7 +3799,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
actInterface = i;
maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
if (debug > 0)
- dev_info(&uvd->dev->dev,
+ dev_info(&dev->dev,
"Active setting=%d. "
"maxPS=%d.\n", i, maxPS);
} else
@@ -3840,7 +3840,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
RESTRICT_TO_RANGE(framerate, 0, 5);
break;
default:
- dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n");
+ dev_info(&dev->dev, "IBM camera: using 320x240\n");
size = SIZE_320x240;
/* No break here */
case SIZE_320x240:
@@ -3869,7 +3869,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
canvasY = 120;
break;
default:
- dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n");
+ dev_info(&dev->dev, "IBM NetCamera: using 176x144\n");
size = SIZE_176x144;
/* No break here */
case SIZE_176x144:
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index a1abf95cf751..603ffd008c73 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -77,12 +77,6 @@ MODULE_VERSION(my_VERSION);
* Fusion MPT LAN private structures
*/
-struct NAA_Hosed {
- u16 NAA;
- u8 ieee[FC_ALEN];
- struct NAA_Hosed *next;
-};
-
struct BufferControl {
struct sk_buff *skb;
dma_addr_t dma;
@@ -159,11 +153,6 @@ static u8 LanCtx = MPT_MAX_PROTOCOL_DRIVERS;
static u32 max_buckets_out = 127;
static u32 tx_max_out_p = 127 - 16;
-#ifdef QLOGIC_NAA_WORKAROUND
-static struct NAA_Hosed *mpt_bad_naa = NULL;
-DEFINE_RWLOCK(bad_naa_lock);
-#endif
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* lan_reply - Handle all data sent from the hardware.
@@ -780,30 +769,6 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
// ctx, skb, skb->data));
mac = skb_mac_header(skb);
-#ifdef QLOGIC_NAA_WORKAROUND
-{
- struct NAA_Hosed *nh;
-
- /* Munge the NAA for Tx packets to QLogic boards, which don't follow
- RFC 2625. The longer I look at this, the more my opinion of Qlogic
- drops. */
- read_lock_irq(&bad_naa_lock);
- for (nh = mpt_bad_naa; nh != NULL; nh=nh->next) {
- if ((nh->ieee[0] == mac[0]) &&
- (nh->ieee[1] == mac[1]) &&
- (nh->ieee[2] == mac[2]) &&
- (nh->ieee[3] == mac[3]) &&
- (nh->ieee[4] == mac[4]) &&
- (nh->ieee[5] == mac[5])) {
- cur_naa = nh->NAA;
- dlprintk ((KERN_INFO "mptlan/sdu_send: using NAA value "
- "= %04x.\n", cur_naa));
- break;
- }
- }
- read_unlock_irq(&bad_naa_lock);
-}
-#endif
pTrans->TransactionDetails[0] = cpu_to_le32((cur_naa << 16) |
(mac[0] << 8) |
@@ -1572,79 +1537,6 @@ mpt_lan_type_trans(struct sk_buff *skb, struct net_device *dev)
fcllc = (struct fcllc *)skb->data;
-#ifdef QLOGIC_NAA_WORKAROUND
-{
- u16 source_naa = fch->stype, found = 0;
-
- /* Workaround for QLogic not following RFC 2625 in regards to the NAA
- value. */
-
- if ((source_naa & 0xF000) == 0)
- source_naa = swab16(source_naa);
-
- if (fcllc->ethertype == htons(ETH_P_ARP))
- dlprintk ((KERN_INFO "mptlan/type_trans: got arp req/rep w/ naa of "
- "%04x.\n", source_naa));
-
- if ((fcllc->ethertype == htons(ETH_P_ARP)) &&
- ((source_naa >> 12) != MPT_LAN_NAA_RFC2625)){
- struct NAA_Hosed *nh, *prevnh;
- int i;
-
- dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep from "
- "system with non-RFC 2625 NAA value (%04x).\n",
- source_naa));
-
- write_lock_irq(&bad_naa_lock);
- for (prevnh = nh = mpt_bad_naa; nh != NULL;
- prevnh=nh, nh=nh->next) {
- if ((nh->ieee[0] == fch->saddr[0]) &&
- (nh->ieee[1] == fch->saddr[1]) &&
- (nh->ieee[2] == fch->saddr[2]) &&
- (nh->ieee[3] == fch->saddr[3]) &&
- (nh->ieee[4] == fch->saddr[4]) &&
- (nh->ieee[5] == fch->saddr[5])) {
- found = 1;
- dlprintk ((KERN_INFO "mptlan/type_trans: ARP Re"
- "q/Rep w/ bad NAA from system already"
- " in DB.\n"));
- break;
- }
- }
-
- if ((!found) && (nh == NULL)) {
-
- nh = kmalloc(sizeof(struct NAA_Hosed), GFP_KERNEL);
- dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep w/"
- " bad NAA from system not yet in DB.\n"));
-
- if (nh != NULL) {
- nh->next = NULL;
- if (!mpt_bad_naa)
- mpt_bad_naa = nh;
- if (prevnh)
- prevnh->next = nh;
-
- nh->NAA = source_naa; /* Set the S_NAA value. */
- for (i = 0; i < FC_ALEN; i++)
- nh->ieee[i] = fch->saddr[i];
- dlprintk ((KERN_INFO "Got ARP from %02x:%02x:%02x:%02x:"
- "%02x:%02x with non-compliant S_NAA value.\n",
- fch->saddr[0], fch->saddr[1], fch->saddr[2],
- fch->saddr[3], fch->saddr[4],fch->saddr[5]));
- } else {
- printk (KERN_ERR "mptlan/type_trans: Unable to"
- " kmalloc a NAA_Hosed struct.\n");
- }
- } else if (!found) {
- printk (KERN_ERR "mptlan/type_trans: found not"
- " set, but nh isn't null. Evil "
- "funkiness abounds.\n");
- }
- write_unlock_irq(&bad_naa_lock);
- }
-}
-#endif
/* Strip the SNAP header from ARP packets since we don't
* pass them through to the 802.2/SNAP layers.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9494400e8fd0..fee7304102af 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -227,10 +227,20 @@ config HP_WMI
To compile this driver as a module, choose M here: the module will
be called hp-wmi.
+config ICS932S401
+ tristate "Integrated Circuits ICS932S401"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Integrated Circuits
+ ICS932S401 clock control chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called ics932s401.
+
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on X86
- depends on ACPI_EC
+ depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is a driver for laptops built by MSI (MICRO-STAR
@@ -260,7 +270,7 @@ config PANASONIC_LAPTOP
config COMPAL_LAPTOP
tristate "Compal Laptop Extras"
depends on X86
- depends on ACPI_EC
+ depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is a driver for laptops built by Compal:
@@ -488,4 +498,6 @@ config SGI_GRU_DEBUG
This option enables addition debugging code for the SGI GRU driver. If
you are unsure, say N.
+source "drivers/misc/c2port/Kconfig"
+
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 909e2468cdc9..817f7f5ab3bd 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
+obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
@@ -31,3 +32,4 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
+obj-$(CONFIG_C2PORT) += c2port/
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index 0532a2de2ce4..94c9f911824e 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -1297,6 +1297,12 @@ static int __init acer_wmi_init(void)
set_quirks();
+ if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+ interface->capability &= ~ACER_CAP_BRIGHTNESS;
+ printk(ACER_INFO "Brightness must be controlled by "
+ "generic video driver\n");
+ }
+
if (platform_driver_register(&acer_platform_driver)) {
printk(ACER_ERR "Unable to register platform driver.\n");
goto error_platform_register;
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index a9d5228724a6..8fb8b3591048 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -1208,9 +1208,13 @@ static int __init asus_laptop_init(void)
dev = acpi_get_physical_device(hotk->device->handle);
- result = asus_backlight_init(dev);
- if (result)
- goto fail_backlight;
+ if (!acpi_video_backlight_support()) {
+ result = asus_backlight_init(dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ printk(ASUS_INFO "Brightness ignored, must be controlled by "
+ "ACPI video driver\n");
result = asus_led_init(dev);
if (result)
diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig
new file mode 100644
index 000000000000..e46af9a5810d
--- /dev/null
+++ b/drivers/misc/c2port/Kconfig
@@ -0,0 +1,35 @@
+#
+# C2 port devices
+#
+
+menuconfig C2PORT
+ tristate "Silicon Labs C2 port support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ default no
+ help
+ This option enables support for Silicon Labs C2 port used to
+ program Silicon micro controller chips (and other 8051 compatible).
+
+ If your board have no such micro controllers you don't need this
+ interface at all.
+
+ To compile this driver as a module, choose M here: the module will
+ be called c2port_core. Note that you also need a client module
+ usually called c2port-*.
+
+ If you are not sure, say N here.
+
+if C2PORT
+
+config C2PORT_DURAMAR_2150
+ tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)"
+ depends on X86 && C2PORT
+ default no
+ help
+ This option enables C2 support for the Eurotech's Duramar 2150
+ on board micro controller.
+
+ To compile this driver as a module, choose M here: the module will
+ be called c2port-duramar2150.
+
+endif # C2PORT
diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile
new file mode 100644
index 000000000000..3b2cf43d60f5
--- /dev/null
+++ b/drivers/misc/c2port/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_C2PORT) += core.o
+
+obj-$(CONFIG_C2PORT_DURAMAR_2150) += c2port-duramar2150.o
diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c
new file mode 100644
index 000000000000..338dcc121507
--- /dev/null
+++ b/drivers/misc/c2port/c2port-duramar2150.c
@@ -0,0 +1,158 @@
+/*
+ * Silicon Labs C2 port Linux support for Eurotech Duramar 2150
+ *
+ * Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/c2port.h>
+
+#define DATA_PORT 0x325
+#define DIR_PORT 0x326
+#define C2D (1 << 0)
+#define C2CK (1 << 1)
+
+static DEFINE_MUTEX(update_lock);
+
+/*
+ * C2 port operations
+ */
+
+static void duramar2150_c2port_access(struct c2port_device *dev, int status)
+{
+ u8 v;
+
+ mutex_lock(&update_lock);
+
+ v = inb(DIR_PORT);
+
+ /* 0 = input, 1 = output */
+ if (status)
+ outb(v | (C2D | C2CK), DIR_PORT);
+ else
+ /* When access is "off" is important that both lines are set
+ * as inputs or hi-impedence */
+ outb(v & ~(C2D | C2CK), DIR_PORT);
+
+ mutex_unlock(&update_lock);
+}
+
+static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir)
+{
+ u8 v;
+
+ mutex_lock(&update_lock);
+
+ v = inb(DIR_PORT);
+
+ if (dir)
+ outb(v & ~C2D, DIR_PORT);
+ else
+ outb(v | C2D, DIR_PORT);
+
+ mutex_unlock(&update_lock);
+}
+
+static int duramar2150_c2port_c2d_get(struct c2port_device *dev)
+{
+ return inb(DATA_PORT) & C2D;
+}
+
+static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status)
+{
+ u8 v;
+
+ mutex_lock(&update_lock);
+
+ v = inb(DATA_PORT);
+
+ if (status)
+ outb(v | C2D, DATA_PORT);
+ else
+ outb(v & ~C2D, DATA_PORT);
+
+ mutex_unlock(&update_lock);
+}
+
+static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status)
+{
+ u8 v;
+
+ mutex_lock(&update_lock);
+
+ v = inb(DATA_PORT);
+
+ if (status)
+ outb(v | C2CK, DATA_PORT);
+ else
+ outb(v & ~C2CK, DATA_PORT);
+
+ mutex_unlock(&update_lock);
+}
+
+static struct c2port_ops duramar2150_c2port_ops = {
+ .block_size = 512, /* bytes */
+ .blocks_num = 30, /* total flash size: 15360 bytes */
+
+ .access = duramar2150_c2port_access,
+ .c2d_dir = duramar2150_c2port_c2d_dir,
+ .c2d_get = duramar2150_c2port_c2d_get,
+ .c2d_set = duramar2150_c2port_c2d_set,
+ .c2ck_set = duramar2150_c2port_c2ck_set,
+};
+
+static struct c2port_device *duramar2150_c2port_dev;
+
+/*
+ * Module stuff
+ */
+
+static int __init duramar2150_c2port_init(void)
+{
+ struct resource *res;
+ int ret = 0;
+
+ res = request_region(0x325, 2, "c2port");
+ if (!res)
+ return -EBUSY;
+
+ duramar2150_c2port_dev = c2port_device_register("uc",
+ &duramar2150_c2port_ops, NULL);
+ if (!duramar2150_c2port_dev) {
+ ret = -ENODEV;
+ goto free_region;
+ }
+
+ return 0;
+
+free_region:
+ release_region(0x325, 2);
+ return ret;
+}
+
+static void __exit duramar2150_c2port_exit(void)
+{
+ /* Setup the GPIOs as input by default (access = 0) */
+ duramar2150_c2port_access(duramar2150_c2port_dev, 0);
+
+ c2port_device_unregister(duramar2150_c2port_dev);
+
+ release_region(0x325, 2);
+}
+
+module_init(duramar2150_c2port_init);
+module_exit(duramar2150_c2port_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c
new file mode 100644
index 000000000000..976b35d1d035
--- /dev/null
+++ b/drivers/misc/c2port/core.c
@@ -0,0 +1,1002 @@
+/*
+ * Silicon Labs C2 port core Linux support
+ *
+ * Copyright (c) 2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+
+#include <linux/c2port.h>
+
+#define DRIVER_NAME "c2port"
+#define DRIVER_VERSION "0.51.0"
+
+static DEFINE_SPINLOCK(c2port_idr_lock);
+static DEFINE_IDR(c2port_idr);
+
+/*
+ * Local variables
+ */
+
+static struct class *c2port_class;
+
+/*
+ * C2 registers & commands defines
+ */
+
+/* C2 registers */
+#define C2PORT_DEVICEID 0x00
+#define C2PORT_REVID 0x01
+#define C2PORT_FPCTL 0x02
+#define C2PORT_FPDAT 0xB4
+
+/* C2 interface commands */
+#define C2PORT_GET_VERSION 0x01
+#define C2PORT_DEVICE_ERASE 0x03
+#define C2PORT_BLOCK_READ 0x06
+#define C2PORT_BLOCK_WRITE 0x07
+#define C2PORT_PAGE_ERASE 0x08
+
+/* C2 status return codes */
+#define C2PORT_INVALID_COMMAND 0x00
+#define C2PORT_COMMAND_FAILED 0x02
+#define C2PORT_COMMAND_OK 0x0d
+
+/*
+ * C2 port low level signal managements
+ */
+
+static void c2port_reset(struct c2port_device *dev)
+{
+ struct c2port_ops *ops = dev->ops;
+
+ /* To reset the device we have to keep clock line low for at least
+ * 20us.
+ */
+ local_irq_disable();
+ ops->c2ck_set(dev, 0);
+ udelay(25);
+ ops->c2ck_set(dev, 1);
+ local_irq_enable();
+
+ udelay(1);
+}
+
+static void c2port_strobe_ck(struct c2port_device *dev)
+{
+ struct c2port_ops *ops = dev->ops;
+
+ /* During hi-low-hi transition we disable local IRQs to avoid
+ * interructions since C2 port specification says that it must be
+ * shorter than 5us, otherwise the microcontroller may consider
+ * it as a reset signal!
+ */
+ local_irq_disable();
+ ops->c2ck_set(dev, 0);
+ udelay(1);
+ ops->c2ck_set(dev, 1);
+ local_irq_enable();
+
+ udelay(1);
+}
+
+/*
+ * C2 port basic functions
+ */
+
+static void c2port_write_ar(struct c2port_device *dev, u8 addr)
+{
+ struct c2port_ops *ops = dev->ops;
+ int i;
+
+ /* START field */
+ c2port_strobe_ck(dev);
+
+ /* INS field (11b, LSB first) */
+ ops->c2d_dir(dev, 0);
+ ops->c2d_set(dev, 1);
+ c2port_strobe_ck(dev);
+ ops->c2d_set(dev, 1);
+ c2port_strobe_ck(dev);
+
+ /* ADDRESS field */
+ for (i = 0; i < 8; i++) {
+ ops->c2d_set(dev, addr & 0x01);
+ c2port_strobe_ck(dev);
+
+ addr >>= 1;
+ }
+
+ /* STOP field */
+ ops->c2d_dir(dev, 1);
+ c2port_strobe_ck(dev);
+}
+
+static int c2port_read_ar(struct c2port_device *dev, u8 *addr)
+{
+ struct c2port_ops *ops = dev->ops;
+ int i;
+
+ /* START field */
+ c2port_strobe_ck(dev);
+
+ /* INS field (10b, LSB first) */
+ ops->c2d_dir(dev, 0);
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+ ops->c2d_set(dev, 1);
+ c2port_strobe_ck(dev);
+
+ /* ADDRESS field */
+ ops->c2d_dir(dev, 1);
+ *addr = 0;
+ for (i = 0; i < 8; i++) {
+ *addr >>= 1; /* shift in 8-bit ADDRESS field LSB first */
+
+ c2port_strobe_ck(dev);
+ if (ops->c2d_get(dev))
+ *addr |= 0x80;
+ }
+
+ /* STOP field */
+ c2port_strobe_ck(dev);
+
+ return 0;
+}
+
+static int c2port_write_dr(struct c2port_device *dev, u8 data)
+{
+ struct c2port_ops *ops = dev->ops;
+ int timeout, i;
+
+ /* START field */
+ c2port_strobe_ck(dev);
+
+ /* INS field (01b, LSB first) */
+ ops->c2d_dir(dev, 0);
+ ops->c2d_set(dev, 1);
+ c2port_strobe_ck(dev);
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+
+ /* LENGTH field (00b, LSB first -> 1 byte) */
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+
+ /* DATA field */
+ for (i = 0; i < 8; i++) {
+ ops->c2d_set(dev, data & 0x01);
+ c2port_strobe_ck(dev);
+
+ data >>= 1;
+ }
+
+ /* WAIT field */
+ ops->c2d_dir(dev, 1);
+ timeout = 20;
+ do {
+ c2port_strobe_ck(dev);
+ if (ops->c2d_get(dev))
+ break;
+
+ udelay(1);
+ } while (--timeout > 0);
+ if (timeout == 0)
+ return -EIO;
+
+ /* STOP field */
+ c2port_strobe_ck(dev);
+
+ return 0;
+}
+
+static int c2port_read_dr(struct c2port_device *dev, u8 *data)
+{
+ struct c2port_ops *ops = dev->ops;
+ int timeout, i;
+
+ /* START field */
+ c2port_strobe_ck(dev);
+
+ /* INS field (00b, LSB first) */
+ ops->c2d_dir(dev, 0);
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+
+ /* LENGTH field (00b, LSB first -> 1 byte) */
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+ ops->c2d_set(dev, 0);
+ c2port_strobe_ck(dev);
+
+ /* WAIT field */
+ ops->c2d_dir(dev, 1);
+ timeout = 20;
+ do {
+ c2port_strobe_ck(dev);
+ if (ops->c2d_get(dev))
+ break;
+
+ udelay(1);
+ } while (--timeout > 0);
+ if (timeout == 0)
+ return -EIO;
+
+ /* DATA field */
+ *data = 0;
+ for (i = 0; i < 8; i++) {
+ *data >>= 1; /* shift in 8-bit DATA field LSB first */
+
+ c2port_strobe_ck(dev);
+ if (ops->c2d_get(dev))
+ *data |= 0x80;
+ }
+
+ /* STOP field */
+ c2port_strobe_ck(dev);
+
+ return 0;
+}
+
+static int c2port_poll_in_busy(struct c2port_device *dev)
+{
+ u8 addr;
+ int ret, timeout = 20;
+
+ do {
+ ret = (c2port_read_ar(dev, &addr));
+ if (ret < 0)
+ return -EIO;
+
+ if (!(addr & 0x02))
+ break;
+
+ udelay(1);
+ } while (--timeout > 0);
+ if (timeout == 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int c2port_poll_out_ready(struct c2port_device *dev)
+{
+ u8 addr;
+ int ret, timeout = 10000; /* erase flash needs long time... */
+
+ do {
+ ret = (c2port_read_ar(dev, &addr));
+ if (ret < 0)
+ return -EIO;
+
+ if (addr & 0x01)
+ break;
+
+ udelay(1);
+ } while (--timeout > 0);
+ if (timeout == 0)
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * sysfs methods
+ */
+
+static ssize_t c2port_show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", c2dev->name);
+}
+
+static ssize_t c2port_show_flash_blocks_num(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ struct c2port_ops *ops = c2dev->ops;
+
+ return sprintf(buf, "%d\n", ops->blocks_num);
+}
+
+static ssize_t c2port_show_flash_block_size(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ struct c2port_ops *ops = c2dev->ops;
+
+ return sprintf(buf, "%d\n", ops->block_size);
+}
+
+static ssize_t c2port_show_flash_size(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ struct c2port_ops *ops = c2dev->ops;
+
+ return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size);
+}
+
+static ssize_t c2port_show_access(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", c2dev->access);
+}
+
+static ssize_t c2port_store_access(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ struct c2port_ops *ops = c2dev->ops;
+ int status, ret;
+
+ ret = sscanf(buf, "%d", &status);
+ if (ret != 1)
+ return -EINVAL;
+
+ mutex_lock(&c2dev->mutex);
+
+ c2dev->access = !!status;
+
+ /* If access is "on" clock should be HIGH _before_ setting the line
+ * as output and data line should be set as INPUT anyway */
+ if (c2dev->access)
+ ops->c2ck_set(c2dev, 1);
+ ops->access(c2dev, c2dev->access);
+ if (c2dev->access)
+ ops->c2d_dir(c2dev, 1);
+
+ mutex_unlock(&c2dev->mutex);
+
+ return count;
+}
+
+static ssize_t c2port_store_reset(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+ /* Check the device access status */
+ if (!c2dev->access)
+ return -EBUSY;
+
+ mutex_lock(&c2dev->mutex);
+
+ c2port_reset(c2dev);
+ c2dev->flash_access = 0;
+
+ mutex_unlock(&c2dev->mutex);
+
+ return count;
+}
+
+static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf)
+{
+ u8 data;
+ int ret;
+
+ /* Select DEVICEID register for C2 data register accesses */
+ c2port_write_ar(dev, C2PORT_DEVICEID);
+
+ /* Read and return the device ID register */
+ ret = c2port_read_dr(dev, &data);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", data);
+}
+
+static ssize_t c2port_show_dev_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ /* Check the device access status */
+ if (!c2dev->access)
+ return -EBUSY;
+
+ mutex_lock(&c2dev->mutex);
+ ret = __c2port_show_dev_id(c2dev, buf);
+ mutex_unlock(&c2dev->mutex);
+
+ if (ret < 0)
+ dev_err(dev, "cannot read from %s\n", c2dev->name);
+
+ return ret;
+}
+
+static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf)
+{
+ u8 data;
+ int ret;
+
+ /* Select REVID register for C2 data register accesses */
+ c2port_write_ar(dev, C2PORT_REVID);
+
+ /* Read and return the revision ID register */
+ ret = c2port_read_dr(dev, &data);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", data);
+}
+
+static ssize_t c2port_show_rev_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ /* Check the device access status */
+ if (!c2dev->access)
+ return -EBUSY;
+
+ mutex_lock(&c2dev->mutex);
+ ret = __c2port_show_rev_id(c2dev, buf);
+ mutex_unlock(&c2dev->mutex);
+
+ if (ret < 0)
+ dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name);
+
+ return ret;
+}
+
+static ssize_t c2port_show_flash_access(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", c2dev->flash_access);
+}
+
+static ssize_t __c2port_store_flash_access(struct c2port_device *dev,
+ int status)
+{
+ int ret;
+
+ /* Check the device access status */
+ if (!dev->access)
+ return -EBUSY;
+
+ dev->flash_access = !!status;
+
+ /* If flash_access is off we have nothing to do... */
+ if (dev->flash_access == 0)
+ return 0;
+
+ /* Target the C2 flash programming control register for C2 data
+ * register access */
+ c2port_write_ar(dev, C2PORT_FPCTL);
+
+ /* Write the first keycode to enable C2 Flash programming */
+ ret = c2port_write_dr(dev, 0x02);
+ if (ret < 0)
+ return ret;
+
+ /* Write the second keycode to enable C2 Flash programming */
+ ret = c2port_write_dr(dev, 0x01);
+ if (ret < 0)
+ return ret;
+
+ /* Delay for at least 20ms to ensure the target is ready for
+ * C2 flash programming */
+ mdelay(25);
+
+ return 0;
+}
+
+static ssize_t c2port_store_flash_access(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ int status;
+ ssize_t ret;
+
+ ret = sscanf(buf, "%d", &status);
+ if (ret != 1)
+ return -EINVAL;
+
+ mutex_lock(&c2dev->mutex);
+ ret = __c2port_store_flash_access(c2dev, status);
+ mutex_unlock(&c2dev->mutex);
+
+ if (ret < 0) {
+ dev_err(c2dev->dev, "cannot enable %s flash programming\n",
+ c2dev->name);
+ return ret;
+ }
+
+ return count;
+}
+
+static ssize_t __c2port_write_flash_erase(struct c2port_device *dev)
+{
+ u8 status;
+ int ret;
+
+ /* Target the C2 flash programming data register for C2 data register
+ * access.
+ */
+ c2port_write_ar(dev, C2PORT_FPDAT);
+
+ /* Send device erase command */
+ c2port_write_dr(dev, C2PORT_DEVICE_ERASE);
+
+ /* Wait for input acknowledge */
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Should check status before starting FLASH access sequence */
+
+ /* Wait for status information */
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Read flash programming interface status */
+ ret = c2port_read_dr(dev, &status);
+ if (ret < 0)
+ return ret;
+ if (status != C2PORT_COMMAND_OK)
+ return -EBUSY;
+
+ /* Send a three-byte arming sequence to enable the device erase.
+ * If the sequence is not received correctly, the command will be
+ * ignored.
+ * Sequence is: 0xde, 0xad, 0xa5.
+ */
+ c2port_write_dr(dev, 0xde);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+ c2port_write_dr(dev, 0xad);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+ c2port_write_dr(dev, 0xa5);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static ssize_t c2port_store_flash_erase(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct c2port_device *c2dev = dev_get_drvdata(dev);
+ int ret;
+
+ /* Check the device and flash access status */
+ if (!c2dev->access || !c2dev->flash_access)
+ return -EBUSY;
+
+ mutex_lock(&c2dev->mutex);
+ ret = __c2port_write_flash_erase(c2dev);
+ mutex_unlock(&c2dev->mutex);
+
+ if (ret < 0) {
+ dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name);
+ return ret;
+ }
+
+ return count;
+}
+
+static ssize_t __c2port_read_flash_data(struct c2port_device *dev,
+ char *buffer, loff_t offset, size_t count)
+{
+ struct c2port_ops *ops = dev->ops;
+ u8 status, nread = 128;
+ int i, ret;
+
+ /* Check for flash end */
+ if (offset >= ops->block_size * ops->blocks_num)
+ return 0;
+
+ if (ops->block_size * ops->blocks_num - offset < nread)
+ nread = ops->block_size * ops->blocks_num - offset;
+ if (count < nread)
+ nread = count;
+ if (nread == 0)
+ return nread;
+
+ /* Target the C2 flash programming data register for C2 data register
+ * access */
+ c2port_write_ar(dev, C2PORT_FPDAT);
+
+ /* Send flash block read command */
+ c2port_write_dr(dev, C2PORT_BLOCK_READ);
+
+ /* Wait for input acknowledge */
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Should check status before starting FLASH access sequence */
+
+ /* Wait for status information */
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Read flash programming interface status */
+ ret = c2port_read_dr(dev, &status);
+ if (ret < 0)
+ return ret;
+ if (status != C2PORT_COMMAND_OK)
+ return -EBUSY;
+
+ /* Send address high byte */
+ c2port_write_dr(dev, offset >> 8);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Send address low byte */
+ c2port_write_dr(dev, offset & 0x00ff);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Send address block size */
+ c2port_write_dr(dev, nread);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Should check status before reading FLASH block */
+
+ /* Wait for status information */
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Read flash programming interface status */
+ ret = c2port_read_dr(dev, &status);
+ if (ret < 0)
+ return ret;
+ if (status != C2PORT_COMMAND_OK)
+ return -EBUSY;
+
+ /* Read flash block */
+ for (i = 0; i < nread; i++) {
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ ret = c2port_read_dr(dev, buffer+i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return nread;
+}
+
+static ssize_t c2port_read_flash_data(struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buffer, loff_t offset, size_t count)
+{
+ struct c2port_device *c2dev =
+ dev_get_drvdata(container_of(kobj,
+ struct device, kobj));
+ ssize_t ret;
+
+ /* Check the device and flash access status */
+ if (!c2dev->access || !c2dev->flash_access)
+ return -EBUSY;
+
+ mutex_lock(&c2dev->mutex);
+ ret = __c2port_read_flash_data(c2dev, buffer, offset, count);
+ mutex_unlock(&c2dev->mutex);
+
+ if (ret < 0)
+ dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name);
+
+ return ret;
+}
+
+static ssize_t __c2port_write_flash_data(struct c2port_device *dev,
+ char *buffer, loff_t offset, size_t count)
+{
+ struct c2port_ops *ops = dev->ops;
+ u8 status, nwrite = 128;
+ int i, ret;
+
+ if (nwrite > count)
+ nwrite = count;
+ if (ops->block_size * ops->blocks_num - offset < nwrite)
+ nwrite = ops->block_size * ops->blocks_num - offset;
+
+ /* Check for flash end */
+ if (offset >= ops->block_size * ops->blocks_num)
+ return -EINVAL;
+
+ /* Target the C2 flash programming data register for C2 data register
+ * access */
+ c2port_write_ar(dev, C2PORT_FPDAT);
+
+ /* Send flash block write command */
+ c2port_write_dr(dev, C2PORT_BLOCK_WRITE);
+
+ /* Wait for input acknowledge */
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Should check status before starting FLASH access sequence */
+
+ /* Wait for status information */
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Read flash programming interface status */
+ ret = c2port_read_dr(dev, &status);
+ if (ret < 0)
+ return ret;
+ if (status != C2PORT_COMMAND_OK)
+ return -EBUSY;
+
+ /* Send address high byte */
+ c2port_write_dr(dev, offset >> 8);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Send address low byte */
+ c2port_write_dr(dev, offset & 0x00ff);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Send address block size */
+ c2port_write_dr(dev, nwrite);
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Should check status before writing FLASH block */
+
+ /* Wait for status information */
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Read flash programming interface status */
+ ret = c2port_read_dr(dev, &status);
+ if (ret < 0)
+ return ret;
+ if (status != C2PORT_COMMAND_OK)
+ return -EBUSY;
+
+ /* Write flash block */
+ for (i = 0; i < nwrite; i++) {
+ ret = c2port_write_dr(dev, *(buffer+i));
+ if (ret < 0)
+ return ret;
+
+ ret = c2port_poll_in_busy(dev);
+ if (ret < 0)
+ return ret;
+
+ }
+
+ /* Wait for last flash write to complete */
+ ret = c2port_poll_out_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ return nwrite;
+}
+
+static ssize_t c2port_write_flash_data(struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buffer, loff_t offset, size_t count)
+{
+ struct c2port_device *c2dev =
+ dev_get_drvdata(container_of(kobj,
+ struct device, kobj));
+ int ret;
+
+ /* Check the device access status */
+ if (!c2dev->access || !c2dev->flash_access)
+ return -EBUSY;
+
+ mutex_lock(&c2dev->mutex);
+ ret = __c2port_write_flash_data(c2dev, buffer, offset, count);
+ mutex_unlock(&c2dev->mutex);
+
+ if (ret < 0)
+ dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name);
+
+ return ret;
+}
+
+/*
+ * Class attributes
+ */
+
+static struct device_attribute c2port_attrs[] = {
+ __ATTR(name, 0444, c2port_show_name, NULL),
+ __ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL),
+ __ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL),
+ __ATTR(flash_size, 0444, c2port_show_flash_size, NULL),
+ __ATTR(access, 0644, c2port_show_access, c2port_store_access),
+ __ATTR(reset, 0200, NULL, c2port_store_reset),
+ __ATTR(dev_id, 0444, c2port_show_dev_id, NULL),
+ __ATTR(rev_id, 0444, c2port_show_rev_id, NULL),
+
+ __ATTR(flash_access, 0644, c2port_show_flash_access,
+ c2port_store_flash_access),
+ __ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase),
+ __ATTR_NULL,
+};
+
+static struct bin_attribute c2port_bin_attrs = {
+ .attr = {
+ .name = "flash_data",
+ .mode = 0644
+ },
+ .read = c2port_read_flash_data,
+ .write = c2port_write_flash_data,
+ /* .size is computed at run-time */
+};
+
+/*
+ * Exported functions
+ */
+
+struct c2port_device *c2port_device_register(char *name,
+ struct c2port_ops *ops, void *devdata)
+{
+ struct c2port_device *c2dev;
+ int id, ret;
+
+ if (unlikely(!ops) || unlikely(!ops->access) || \
+ unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \
+ unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set))
+ return ERR_PTR(-EINVAL);
+
+ c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL);
+ if (unlikely(!c2dev))
+ return ERR_PTR(-ENOMEM);
+
+ ret = idr_pre_get(&c2port_idr, GFP_KERNEL);
+ if (!ret) {
+ ret = -ENOMEM;
+ goto error_idr_get_new;
+ }
+
+ spin_lock_irq(&c2port_idr_lock);
+ ret = idr_get_new(&c2port_idr, c2dev, &id);
+ spin_unlock_irq(&c2port_idr_lock);
+
+ if (ret < 0)
+ goto error_idr_get_new;
+ c2dev->id = id;
+
+ c2dev->dev = device_create(c2port_class, NULL, 0, c2dev,
+ "c2port%d", id);
+ if (unlikely(!c2dev->dev)) {
+ ret = -ENOMEM;
+ goto error_device_create;
+ }
+ dev_set_drvdata(c2dev->dev, c2dev);
+
+ strncpy(c2dev->name, name, C2PORT_NAME_LEN);
+ c2dev->ops = ops;
+ mutex_init(&c2dev->mutex);
+
+ /* Create binary file */
+ c2port_bin_attrs.size = ops->blocks_num * ops->block_size;
+ ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs);
+ if (unlikely(ret))
+ goto error_device_create_bin_file;
+
+ /* By default C2 port access is off */
+ c2dev->access = c2dev->flash_access = 0;
+ ops->access(c2dev, 0);
+
+ dev_info(c2dev->dev, "C2 port %s added\n", name);
+ dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes "
+ "(%d bytes total)\n",
+ name, ops->blocks_num, ops->block_size,
+ ops->blocks_num * ops->block_size);
+
+ return c2dev;
+
+error_device_create_bin_file:
+ device_destroy(c2port_class, 0);
+
+error_device_create:
+ spin_lock_irq(&c2port_idr_lock);
+ idr_remove(&c2port_idr, id);
+ spin_unlock_irq(&c2port_idr_lock);
+
+error_idr_get_new:
+ kfree(c2dev);
+
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(c2port_device_register);
+
+void c2port_device_unregister(struct c2port_device *c2dev)
+{
+ if (!c2dev)
+ return;
+
+ dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name);
+
+ device_remove_bin_file(c2dev->dev, &c2port_bin_attrs);
+ spin_lock_irq(&c2port_idr_lock);
+ idr_remove(&c2port_idr, c2dev->id);
+ spin_unlock_irq(&c2port_idr_lock);
+
+ device_destroy(c2port_class, c2dev->id);
+
+ kfree(c2dev);
+}
+EXPORT_SYMBOL(c2port_device_unregister);
+
+/*
+ * Module stuff
+ */
+
+static int __init c2port_init(void)
+{
+ printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION
+ " - (C) 2007 Rodolfo Giometti\n");
+
+ c2port_class = class_create(THIS_MODULE, "c2port");
+ if (!c2port_class) {
+ printk(KERN_ERR "c2port: failed to allocate class\n");
+ return -ENOMEM;
+ }
+ c2port_class->dev_attrs = c2port_attrs;
+
+ return 0;
+}
+
+static void __exit c2port_exit(void)
+{
+ class_destroy(c2port_class);
+}
+
+module_init(c2port_init);
+module_exit(c2port_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c
index 344b790a6253..11003bba10d3 100644
--- a/drivers/misc/compal-laptop.c
+++ b/drivers/misc/compal-laptop.c
@@ -326,12 +326,14 @@ static int __init compal_init(void)
/* Register backlight stuff */
- compalbl_device = backlight_device_register("compal-laptop", NULL, NULL,
- &compalbl_ops);
- if (IS_ERR(compalbl_device))
- return PTR_ERR(compalbl_device);
+ if (!acpi_video_backlight_support()) {
+ compalbl_device = backlight_device_register("compal-laptop", NULL, NULL,
+ &compalbl_ops);
+ if (IS_ERR(compalbl_device))
+ return PTR_ERR(compalbl_device);
- compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1;
+ compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1;
+ }
ret = platform_driver_register(&compal_driver);
if (ret)
diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index 9ef98b2d5039..02fe2b8b8939 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -825,9 +825,15 @@ static int __init eeepc_laptop_init(void)
return -ENODEV;
}
dev = acpi_get_physical_device(ehotk->device->handle);
- result = eeepc_backlight_init(dev);
- if (result)
- goto fail_backlight;
+
+ if (!acpi_video_backlight_support()) {
+ result = eeepc_backlight_init(dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ printk(EEEPC_INFO "Backlight controlled by ACPI video "
+ "driver\n");
+
result = eeepc_hwmon_init(dev);
if (result)
goto fail_hwmon;
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index d2cf0bfe3163..a7dd3e9fb79d 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -464,6 +464,14 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id)
return 0;
}
+static int dmi_check_cb_s6420(const struct dmi_system_id *id)
+{
+ dmi_check_cb_common(id);
+ fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
+ fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */
+ return 0;
+}
+
static int dmi_check_cb_p8010(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
@@ -473,7 +481,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id)
return 0;
}
-static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
+static struct dmi_system_id fujitsu_dmi_table[] = {
{
.ident = "Fujitsu Siemens S6410",
.matches = {
@@ -482,6 +490,13 @@ static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
},
.callback = dmi_check_cb_s6410},
{
+ .ident = "Fujitsu Siemens S6420",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"),
+ },
+ .callback = dmi_check_cb_s6420},
+ {
.ident = "Fujitsu LifeBook P8010",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -990,16 +1005,16 @@ static int __init fujitsu_init(void)
/* Register backlight stuff */
- fujitsu->bl_device =
- backlight_device_register("fujitsu-laptop", NULL, NULL,
- &fujitsubl_ops);
- if (IS_ERR(fujitsu->bl_device))
- return PTR_ERR(fujitsu->bl_device);
-
- max_brightness = fujitsu->max_brightness;
-
- fujitsu->bl_device->props.max_brightness = max_brightness - 1;
- fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
+ if (!acpi_video_backlight_support()) {
+ fujitsu->bl_device =
+ backlight_device_register("fujitsu-laptop", NULL, NULL,
+ &fujitsubl_ops);
+ if (IS_ERR(fujitsu->bl_device))
+ return PTR_ERR(fujitsu->bl_device);
+ max_brightness = fujitsu->max_brightness;
+ fujitsu->bl_device->props.max_brightness = max_brightness - 1;
+ fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
+ }
ret = platform_driver_register(&fujitsupf_driver);
if (ret)
@@ -1035,7 +1050,8 @@ fail_hotkey:
fail_backlight:
- backlight_device_unregister(fujitsu->bl_device);
+ if (fujitsu->bl_device)
+ backlight_device_unregister(fujitsu->bl_device);
fail_platform_device2:
@@ -1062,7 +1078,8 @@ static void __exit fujitsu_cleanup(void)
&fujitsupf_attribute_group);
platform_device_unregister(fujitsu->pf_device);
platform_driver_unregister(&fujitsupf_driver);
- backlight_device_unregister(fujitsu->bl_device);
+ if (fujitsu->bl_device)
+ backlight_device_unregister(fujitsu->bl_device);
acpi_bus_unregister_driver(&acpi_fujitsu_driver);
diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c
new file mode 100644
index 000000000000..6e43ab4231ae
--- /dev/null
+++ b/drivers/misc/ics932s401.c
@@ -0,0 +1,515 @@
+/*
+ * A driver for the Integrated Circuits ICS932S401
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(ics932s401);
+
+/* ICS932S401 registers */
+#define ICS932S401_REG_CFG2 0x01
+#define ICS932S401_CFG1_SPREAD 0x01
+#define ICS932S401_REG_CFG7 0x06
+#define ICS932S401_FS_MASK 0x07
+#define ICS932S401_REG_VENDOR_REV 0x07
+#define ICS932S401_VENDOR 1
+#define ICS932S401_VENDOR_MASK 0x0F
+#define ICS932S401_REV 4
+#define ICS932S401_REV_SHIFT 4
+#define ICS932S401_REG_DEVICE 0x09
+#define ICS932S401_DEVICE 11
+#define ICS932S401_REG_CTRL 0x0A
+#define ICS932S401_MN_ENABLED 0x80
+#define ICS932S401_CPU_ALT 0x04
+#define ICS932S401_SRC_ALT 0x08
+#define ICS932S401_REG_CPU_M_CTRL 0x0B
+#define ICS932S401_M_MASK 0x3F
+#define ICS932S401_REG_CPU_N_CTRL 0x0C
+#define ICS932S401_REG_CPU_SPREAD1 0x0D
+#define ICS932S401_REG_CPU_SPREAD2 0x0E
+#define ICS932S401_SPREAD_MASK 0x7FFF
+#define ICS932S401_REG_SRC_M_CTRL 0x0F
+#define ICS932S401_REG_SRC_N_CTRL 0x10
+#define ICS932S401_REG_SRC_SPREAD1 0x11
+#define ICS932S401_REG_SRC_SPREAD2 0x12
+#define ICS932S401_REG_CPU_DIVISOR 0x13
+#define ICS932S401_CPU_DIVISOR_SHIFT 4
+#define ICS932S401_REG_PCISRC_DIVISOR 0x14
+#define ICS932S401_SRC_DIVISOR_MASK 0x0F
+#define ICS932S401_PCI_DIVISOR_SHIFT 4
+
+/* Base clock is 14.318MHz */
+#define BASE_CLOCK 14318
+
+#define NUM_REGS 21
+#define NUM_MIRRORED_REGS 15
+
+static int regs_to_copy[NUM_MIRRORED_REGS] = {
+ ICS932S401_REG_CFG2,
+ ICS932S401_REG_CFG7,
+ ICS932S401_REG_VENDOR_REV,
+ ICS932S401_REG_DEVICE,
+ ICS932S401_REG_CTRL,
+ ICS932S401_REG_CPU_M_CTRL,
+ ICS932S401_REG_CPU_N_CTRL,
+ ICS932S401_REG_CPU_SPREAD1,
+ ICS932S401_REG_CPU_SPREAD2,
+ ICS932S401_REG_SRC_M_CTRL,
+ ICS932S401_REG_SRC_N_CTRL,
+ ICS932S401_REG_SRC_SPREAD1,
+ ICS932S401_REG_SRC_SPREAD2,
+ ICS932S401_REG_CPU_DIVISOR,
+ ICS932S401_REG_PCISRC_DIVISOR,
+};
+
+/* How often do we reread sensors values? (In jiffies) */
+#define SENSOR_REFRESH_INTERVAL (2 * HZ)
+
+/* How often do we reread sensor limit values? (In jiffies) */
+#define LIMIT_REFRESH_INTERVAL (60 * HZ)
+
+struct ics932s401_data {
+ struct attribute_group attrs;
+ struct mutex lock;
+ char sensors_valid;
+ unsigned long sensors_last_updated; /* In jiffies */
+
+ u8 regs[NUM_REGS];
+};
+
+static int ics932s401_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int ics932s401_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int ics932s401_remove(struct i2c_client *client);
+
+static const struct i2c_device_id ics932s401_id[] = {
+ { "ics932s401", ics932s401 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ics932s401_id);
+
+static struct i2c_driver ics932s401_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "ics932s401",
+ },
+ .probe = ics932s401_probe,
+ .remove = ics932s401_remove,
+ .id_table = ics932s401_id,
+ .detect = ics932s401_detect,
+ .address_data = &addr_data,
+};
+
+static struct ics932s401_data *ics932s401_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ics932s401_data *data = i2c_get_clientdata(client);
+ unsigned long local_jiffies = jiffies;
+ int i, temp;
+
+ mutex_lock(&data->lock);
+ if (time_before(local_jiffies, data->sensors_last_updated +
+ SENSOR_REFRESH_INTERVAL)
+ && data->sensors_valid)
+ goto out;
+
+ /*
+ * Each register must be read as a word and then right shifted 8 bits.
+ * Not really sure why this is; setting the "byte count programming"
+ * register to 1 does not fix this problem.
+ */
+ for (i = 0; i < NUM_MIRRORED_REGS; i++) {
+ temp = i2c_smbus_read_word_data(client, regs_to_copy[i]);
+ data->regs[regs_to_copy[i]] = temp >> 8;
+ }
+
+ data->sensors_last_updated = local_jiffies;
+ data->sensors_valid = 1;
+
+out:
+ mutex_unlock(&data->lock);
+ return data;
+}
+
+static ssize_t show_spread_enabled(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+
+ if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)
+ return sprintf(buf, "1\n");
+
+ return sprintf(buf, "0\n");
+}
+
+/* bit to cpu khz map */
+static const int fs_speeds[] = {
+ 266666,
+ 133333,
+ 200000,
+ 166666,
+ 333333,
+ 100000,
+ 400000,
+ 0,
+};
+
+/* clock divisor map */
+static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16,
+ 24, 40, 120};
+
+/* Calculate CPU frequency from the M/N registers. */
+static int calculate_cpu_freq(struct ics932s401_data *data)
+{
+ int m, n, freq;
+
+ m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK;
+ n = data->regs[ICS932S401_REG_CPU_N_CTRL];
+
+ /* Pull in bits 8 & 9 from the M register */
+ n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1;
+ n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3;
+
+ freq = BASE_CLOCK * (n + 8) / (m + 2);
+ freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >>
+ ICS932S401_CPU_DIVISOR_SHIFT];
+
+ return freq;
+}
+
+static ssize_t show_cpu_clock(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+
+ return sprintf(buf, "%d\n", calculate_cpu_freq(data));
+}
+
+static ssize_t show_cpu_clock_sel(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+ int freq;
+
+ if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
+ freq = calculate_cpu_freq(data);
+ else {
+ /* Freq is neatly wrapped up for us */
+ int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK;
+ freq = fs_speeds[fid];
+ if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) {
+ switch (freq) {
+ case 166666:
+ freq = 160000;
+ break;
+ case 333333:
+ freq = 320000;
+ break;
+ }
+ }
+ }
+
+ return sprintf(buf, "%d\n", freq);
+}
+
+/* Calculate SRC frequency from the M/N registers. */
+static int calculate_src_freq(struct ics932s401_data *data)
+{
+ int m, n, freq;
+
+ m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
+ n = data->regs[ICS932S401_REG_SRC_N_CTRL];
+
+ /* Pull in bits 8 & 9 from the M register */
+ n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
+ n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
+
+ freq = BASE_CLOCK * (n + 8) / (m + 2);
+ freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] &
+ ICS932S401_SRC_DIVISOR_MASK];
+
+ return freq;
+}
+
+static ssize_t show_src_clock(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+
+ return sprintf(buf, "%d\n", calculate_src_freq(data));
+}
+
+static ssize_t show_src_clock_sel(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+ int freq;
+
+ if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
+ freq = calculate_src_freq(data);
+ else
+ /* Freq is neatly wrapped up for us */
+ if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT &&
+ data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT)
+ freq = 96000;
+ else
+ freq = 100000;
+
+ return sprintf(buf, "%d\n", freq);
+}
+
+/* Calculate PCI frequency from the SRC M/N registers. */
+static int calculate_pci_freq(struct ics932s401_data *data)
+{
+ int m, n, freq;
+
+ m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
+ n = data->regs[ICS932S401_REG_SRC_N_CTRL];
+
+ /* Pull in bits 8 & 9 from the M register */
+ n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
+ n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
+
+ freq = BASE_CLOCK * (n + 8) / (m + 2);
+ freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >>
+ ICS932S401_PCI_DIVISOR_SHIFT];
+
+ return freq;
+}
+
+static ssize_t show_pci_clock(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+
+ return sprintf(buf, "%d\n", calculate_pci_freq(data));
+}
+
+static ssize_t show_pci_clock_sel(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+ int freq;
+
+ if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
+ freq = calculate_pci_freq(data);
+ else
+ freq = 33333;
+
+ return sprintf(buf, "%d\n", freq);
+}
+
+static ssize_t show_value(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+
+static ssize_t show_spread(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+
+static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL);
+static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL);
+static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL);
+static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL);
+static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL);
+static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL);
+static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL);
+static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL);
+static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL);
+static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL);
+static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL);
+
+static struct attribute *ics932s401_attr[] =
+{
+ &dev_attr_spread_enabled.attr,
+ &dev_attr_cpu_clock_selection.attr,
+ &dev_attr_cpu_clock.attr,
+ &dev_attr_src_clock_selection.attr,
+ &dev_attr_src_clock.attr,
+ &dev_attr_pci_clock_selection.attr,
+ &dev_attr_pci_clock.attr,
+ &dev_attr_usb_clock.attr,
+ &dev_attr_ref_clock.attr,
+ &dev_attr_cpu_spread.attr,
+ &dev_attr_src_spread.attr,
+ NULL
+};
+
+static ssize_t show_value(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ int x;
+
+ if (devattr == &dev_attr_usb_clock)
+ x = 48000;
+ else if (devattr == &dev_attr_ref_clock)
+ x = BASE_CLOCK;
+ else
+ BUG();
+
+ return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t show_spread(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct ics932s401_data *data = ics932s401_update_device(dev);
+ int reg;
+ unsigned long val;
+
+ if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD))
+ return sprintf(buf, "0%%\n");
+
+ if (devattr == &dev_attr_src_spread)
+ reg = ICS932S401_REG_SRC_SPREAD1;
+ else if (devattr == &dev_attr_cpu_spread)
+ reg = ICS932S401_REG_CPU_SPREAD1;
+ else
+ BUG();
+
+ val = data->regs[reg] | (data->regs[reg + 1] << 8);
+ val &= ICS932S401_SPREAD_MASK;
+
+ /* Scale 0..2^14 to -0.5. */
+ val = 500000 * val / 16384;
+ return sprintf(buf, "-0.%lu%%\n", val);
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int ics932s401_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ if (kind <= 0) {
+ int vendor, device, revision;
+
+ vendor = i2c_smbus_read_word_data(client,
+ ICS932S401_REG_VENDOR_REV);
+ vendor >>= 8;
+ revision = vendor >> ICS932S401_REV_SHIFT;
+ vendor &= ICS932S401_VENDOR_MASK;
+ if (vendor != ICS932S401_VENDOR)
+ return -ENODEV;
+
+ device = i2c_smbus_read_word_data(client,
+ ICS932S401_REG_DEVICE);
+ device >>= 8;
+ if (device != ICS932S401_DEVICE)
+ return -ENODEV;
+
+ if (revision != ICS932S401_REV)
+ dev_info(&adapter->dev, "Unknown revision %d\n",
+ revision);
+ } else
+ dev_dbg(&adapter->dev, "detection forced\n");
+
+ strlcpy(info->type, "ics932s401", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int ics932s401_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ics932s401_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->lock);
+
+ dev_info(&client->dev, "%s chip found\n", client->name);
+
+ /* Register sysfs hooks */
+ data->attrs.attrs = ics932s401_attr;
+ err = sysfs_create_group(&client->dev.kobj, &data->attrs);
+ if (err)
+ goto exit_free;
+
+ return 0;
+
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int ics932s401_remove(struct i2c_client *client)
+{
+ struct ics932s401_data *data = i2c_get_clientdata(client);
+
+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
+ kfree(data);
+ return 0;
+}
+
+static int __init ics932s401_init(void)
+{
+ return i2c_add_driver(&ics932s401_driver);
+}
+
+static void __exit ics932s401_exit(void)
+{
+ i2c_del_driver(&ics932s401_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ICS932S401 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ics932s401_init);
+module_exit(ics932s401_exit);
+
+/* IBM IntelliStation Z30 */
+MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*");
+MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*");
+
+/* IBM x3650/x3550 */
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*");
diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c
index e00a2756e97e..27b7662955bb 100644
--- a/drivers/misc/intel_menlow.c
+++ b/drivers/misc/intel_menlow.c
@@ -52,6 +52,11 @@ MODULE_LICENSE("GPL");
#define MEMORY_ARG_CUR_BANDWIDTH 1
#define MEMORY_ARG_MAX_BANDWIDTH 0
+/*
+ * GTHS returning 'n' would mean that [0,n-1] states are supported
+ * In that case max_cstate would be n-1
+ * GTHS returning '0' would mean that no bandwidth control states are supported
+ */
static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
unsigned long *max_state)
{
@@ -71,6 +76,9 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
if (ACPI_FAILURE(status))
return -EFAULT;
+ if (!value)
+ return -EINVAL;
+
*max_state = value - 1;
return 0;
}
@@ -121,7 +129,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
if (memory_get_int_max_bandwidth(cdev, &max_state))
return -EFAULT;
- if (max_state < 0 || state > max_state)
+ if (state > max_state)
return -EINVAL;
arg_list.count = 1;
diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c
index de898c6938f3..759763d18e4c 100644
--- a/drivers/misc/msi-laptop.c
+++ b/drivers/misc/msi-laptop.c
@@ -347,12 +347,16 @@ static int __init msi_init(void)
/* Register backlight stuff */
- msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL,
- &msibl_ops);
- if (IS_ERR(msibl_device))
- return PTR_ERR(msibl_device);
-
- msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1;
+ if (acpi_video_backlight_support()) {
+ printk(KERN_INFO "MSI: Brightness ignored, must be controlled "
+ "by ACPI video driver\n");
+ } else {
+ msibl_device = backlight_device_register("msi-laptop-bl", NULL,
+ NULL, &msibl_ops);
+ if (IS_ERR(msibl_device))
+ return PTR_ERR(msibl_device);
+ msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1;
+ }
ret = platform_driver_register(&msipf_driver);
if (ret)
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 06f07e19dc70..7bcb81002dcf 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -1038,7 +1038,11 @@ static int sony_nc_add(struct acpi_device *device)
goto outinput;
}
- if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) {
+ if (!acpi_video_backlight_support()) {
+ printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+ "controlled by ACPI video driver\n");
+ } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
+ &handle))) {
sony_backlight_device = backlight_device_register("sony", NULL,
NULL,
&sony_backlight_ops);
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 4db1cf9078d9..7a4a26b0edd2 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -4932,16 +4932,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
*/
b = tpacpi_check_std_acpi_brightness_support();
if (b > 0) {
- if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
- printk(TPACPI_NOTICE
- "Lenovo BIOS switched to ACPI backlight "
- "control mode\n");
- }
- if (brightness_enable > 1) {
- printk(TPACPI_NOTICE
- "standard ACPI backlight interface "
- "available, not loading native one...\n");
- return 1;
+
+ if (acpi_video_backlight_support()) {
+ if (brightness_enable > 1) {
+ printk(TPACPI_NOTICE
+ "Standard ACPI backlight interface "
+ "available, not loading native one.\n");
+ return 1;
+ } else if (brightness_enable == 1) {
+ printk(TPACPI_NOTICE
+ "Backlight control force enabled, even if standard "
+ "ACPI backlight interface is available\n");
+ }
+ } else {
+ if (brightness_enable > 1) {
+ printk(TPACPI_NOTICE
+ "Standard ACPI backlight interface not "
+ "available, thinkpad_acpi native "
+ "brightness control enabled\n");
+ }
}
}
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 0d9b2d6f9ebf..f210a8ee6861 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -216,8 +216,7 @@ int mmc_add_card(struct mmc_card *card)
int ret;
const char *type;
- snprintf(card->dev.bus_id, sizeof(card->dev.bus_id),
- "%s:%04x", mmc_hostname(card->host), card->rca);
+ dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca);
switch (card->type) {
case MMC_TYPE_MMC:
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 044d84eeed7c..f7284b905eb3 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -280,7 +280,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
(card->host->ios.clock / 1000);
if (data->flags & MMC_DATA_WRITE)
- limit_us = 250000;
+ /*
+ * The limit is really 250 ms, but that is
+ * insufficient for some crappy cards.
+ */
+ limit_us = 300000;
else
limit_us = 100000;
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 6da80fd4d974..5e945e64ead7 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -73,8 +73,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
if (err)
goto free;
- snprintf(host->class_dev.bus_id, BUS_ID_SIZE,
- "mmc%d", host->index);
+ dev_set_name(&host->class_dev, "mmc%d", host->index);
host->parent = dev;
host->class_dev.parent = dev;
@@ -121,7 +120,7 @@ int mmc_add_host(struct mmc_host *host)
WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
!host->ops->enable_sdio_irq);
- led_trigger_register_simple(host->class_dev.bus_id, &host->led);
+ led_trigger_register_simple(dev_name(&host->class_dev), &host->led);
err = device_add(&host->class_dev);
if (err)
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 233d0f9b3c4b..46284b527397 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -239,8 +239,7 @@ int sdio_add_func(struct sdio_func *func)
{
int ret;
- snprintf(func->dev.bus_id, sizeof(func->dev.bus_id),
- "%s:%d", mmc_card_id(func->card), func->num);
+ dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num);
ret = device_add(&func->dev);
if (ret == 0)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 07faf5412a1f..ad00e1632317 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1348,7 +1348,7 @@ static int mmc_spi_probe(struct spi_device *spi)
goto fail_add_host;
dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n",
- mmc->class_dev.bus_id,
+ dev_name(&mmc->class_dev),
host->dma_dev ? "" : ", no DMA",
(host->pdata && host->pdata->get_ro)
? "" : ", no WP",
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 30f64b1f2354..4d010a984bed 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1733,7 +1733,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_add_host(mmc);
printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
- mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id,
+ mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
(host->flags & SDHCI_USE_ADMA)?"A":"",
(host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 13844843e8de..82554ddec6b3 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -632,7 +632,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
if (host->req) {
printk(KERN_ERR "%s : unfinished request detected\n",
- sock->dev.bus_id);
+ dev_name(&sock->dev));
mrq->cmd->error = -ETIMEDOUT;
goto err_out;
}
@@ -672,7 +672,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
? PCI_DMA_TODEVICE
: PCI_DMA_FROMDEVICE)) {
printk(KERN_ERR "%s : scatterlist map failed\n",
- sock->dev.bus_id);
+ dev_name(&sock->dev));
mrq->cmd->error = -ENOMEM;
goto err_out;
}
@@ -684,7 +684,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
: PCI_DMA_FROMDEVICE);
if (host->sg_len < 1) {
printk(KERN_ERR "%s : scatterlist map failed\n",
- sock->dev.bus_id);
+ dev_name(&sock->dev));
tifm_unmap_sg(sock, &host->bounce_buf, 1,
r_data->flags & MMC_DATA_WRITE
? PCI_DMA_TODEVICE
@@ -748,7 +748,7 @@ static void tifm_sd_end_cmd(unsigned long data)
if (!mrq) {
printk(KERN_ERR " %s : no request to complete?\n",
- sock->dev.bus_id);
+ dev_name(&sock->dev));
spin_unlock_irqrestore(&sock->lock, flags);
return;
}
@@ -789,7 +789,7 @@ static void tifm_sd_abort(unsigned long data)
printk(KERN_ERR
"%s : card failed to respond for a long period of time "
"(%x, %x)\n",
- host->dev->dev.bus_id, host->req->cmd->opcode, host->cmd_flags);
+ dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
tifm_eject(host->dev);
}
@@ -906,7 +906,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host)
if (rc) {
printk(KERN_ERR "%s : controller failed to reset\n",
- sock->dev.bus_id);
+ dev_name(&sock->dev));
return -ENODEV;
}
@@ -933,7 +933,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host)
if (rc) {
printk(KERN_ERR
"%s : card not ready - probe failed on initialization\n",
- sock->dev.bus_id);
+ dev_name(&sock->dev));
return -ENODEV;
}
@@ -954,7 +954,7 @@ static int tifm_sd_probe(struct tifm_dev *sock)
if (!(TIFM_SOCK_STATE_OCCUPIED
& readl(sock->addr + SOCK_PRESENT_STATE))) {
printk(KERN_WARNING "%s : card gone, unexpectedly\n",
- sock->dev.bus_id);
+ dev_name(&sock->dev));
return rc;
}
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 3e6f5d8609e8..d74ec46aa032 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -406,19 +406,6 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
/* Set the default CFI lock/unlock addresses */
cfi->addr_unlock1 = 0x555;
cfi->addr_unlock2 = 0x2aa;
- /* Modify the unlock address if we are in compatibility mode */
- if ( /* x16 in x8 mode */
- ((cfi->device_type == CFI_DEVICETYPE_X8) &&
- (cfi->cfiq->InterfaceDesc ==
- CFI_INTERFACE_X8_BY_X16_ASYNC)) ||
- /* x32 in x16 mode */
- ((cfi->device_type == CFI_DEVICETYPE_X16) &&
- (cfi->cfiq->InterfaceDesc ==
- CFI_INTERFACE_X16_BY_X32_ASYNC)))
- {
- cfi->addr_unlock1 = 0xaaa;
- cfi->addr_unlock2 = 0x555;
- }
} /* CFI mode */
else if (cfi->cfi_mode == CFI_MODE_JEDEC) {
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index f84ab6182148..2f3f2f719ba4 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1808,9 +1808,7 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base,
* several first banks can contain 0x7f instead of actual ID
*/
do {
- uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8),
- cfi_interleave(cfi),
- cfi->device_type);
+ uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi);
mask = (1 << (cfi->device_type * 8)) - 1;
result = map_read(map, base + ofs);
bank++;
@@ -1824,7 +1822,7 @@ static inline u32 jedec_read_id(struct map_info *map, uint32_t base,
{
map_word result;
unsigned long mask;
- u32 ofs = cfi_build_cmd_addr(1, cfi_interleave(cfi), cfi->device_type);
+ u32 ofs = cfi_build_cmd_addr(1, map, cfi);
mask = (1 << (cfi->device_type * 8)) -1;
result = map_read(map, base + ofs);
return result.x[0] & mask;
@@ -2067,8 +2065,8 @@ static int jedec_probe_chip(struct map_info *map, __u32 base,
}
/* Ensure the unlock addresses we try stay inside the map */
- probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, cfi_interleave(cfi), cfi->device_type);
- probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, cfi_interleave(cfi), cfi->device_type);
+ probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, map, cfi);
+ probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, map, cfi);
if ( ((base + probe_offset1 + map_bankwidth(map)) >= map->size) ||
((base + probe_offset2 + map_bankwidth(map)) >= map->size))
goto retry;
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index e5059aa3c724..8d92d8db9a98 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -14,7 +14,18 @@
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
-
+/* dynamic ioremap() areas */
+#define FLASH_START 0x00000000
+#define FLASH_SIZE 0x800000
+#define FLASH_WIDTH 4
+
+#define SRAM_START 0x60000000
+#define SRAM_SIZE 0xc000
+#define SRAM_WIDTH 4
+
+#define BOOTROM_START 0x70000000
+#define BOOTROM_SIZE 0x80
+#define BOOTROM_WIDTH 4
static struct mtd_info *flash_mtd;
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 35fef655ccc4..3b959fad1c4e 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -24,8 +24,8 @@ static struct mtd_info *mymtd;
static struct map_info h720x_map = {
.name = "H720X",
.bankwidth = 4,
- .size = FLASH_SIZE,
- .phys = FLASH_PHYS,
+ .size = H720X_FLASH_SIZE,
+ .phys = H720X_FLASH_PHYS,
};
static struct mtd_partition h720x_partitions[] = {
@@ -70,7 +70,7 @@ int __init h720x_mtd_init(void)
char *part_type = NULL;
- h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE);
+ h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size);
if (!h720x_map.virt) {
printk(KERN_ERR "H720x-MTD: ioremap failed\n");
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 430d430bce29..d07e3f148951 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7204,10 +7204,13 @@ static void
poll_bnx2(struct net_device *dev)
{
struct bnx2 *bp = netdev_priv(dev);
+ int i;
- disable_irq(bp->pdev->irq);
- bnx2_interrupt(bp->pdev->irq, dev);
- enable_irq(bp->pdev->irq);
+ for (i = 0; i < bp->irq_nvecs; i++) {
+ disable_irq(bp->irq_tbl[i].vector);
+ bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]);
+ enable_irq(bp->irq_tbl[i].vector);
+ }
}
#endif
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 1ace41a13ac3..2c341f83d327 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
u32 fw_vers = 0;
u32 tp_vers = 0;
+ spin_lock(&adapter->stats_lock);
t3_get_fw_version(adapter, &fw_vers);
t3_get_tp_version(adapter, &tp_vers);
+ spin_unlock(&adapter->stats_lock);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
@@ -2699,7 +2701,7 @@ static void set_nqsets(struct adapter *adap)
int hwports = adap->params.nports;
int nqsets = SGE_QSETS;
- if (adap->params.rev > 0) {
+ if (adap->params.rev > 0 && adap->flags & USING_MSIX) {
if (hwports == 2 &&
(hwports * nqsets > SGE_QSETS ||
num_cpus >= nqsets / hwports))
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 968f64be3743..9a0898b0dbce 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -572,7 +572,7 @@ struct t3_vpd {
u32 pad; /* for multiple-of-4 sizing and alignment */
};
-#define EEPROM_MAX_POLL 4
+#define EEPROM_MAX_POLL 40
#define EEPROM_STAT_ADDR 0x4000
#define VPD_BASE 0xc00
@@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
;
pti = &port_types[adapter->params.vpd.port_type[j]];
+ if (!pti->phy_prep) {
+ CH_ALERT(adapter, "Invalid port type index %d\n",
+ adapter->params.vpd.port_type[j]);
+ return -EINVAL;
+ }
+
ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
ai->mdio_ops);
if (ret)
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index a339afbeed38..a3f732418c49 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -706,7 +706,7 @@ tx_err:
mlx4_en_release_rss_steer(priv);
rx_err:
for (i = 0; i < priv->rx_ring_num; i++)
- mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]);
+ mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
cq_err:
while (rx_index--)
mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]);
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index fa431fad0eec..56a2e213fe62 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -87,6 +87,9 @@ enum {
#ifdef CONFIG_MLX4_DEBUG
extern int mlx4_debug_level;
+#else /* CONFIG_MLX4_DEBUG */
+#define mlx4_debug_level (0)
+#endif /* CONFIG_MLX4_DEBUG */
#define mlx4_dbg(mdev, format, arg...) \
do { \
@@ -94,12 +97,6 @@ extern int mlx4_debug_level;
dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \
} while (0)
-#else /* CONFIG_MLX4_DEBUG */
-
-#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0)
-
-#endif /* CONFIG_MLX4_DEBUG */
-
#define mlx4_err(mdev, format, arg...) \
dev_err(&mdev->pdev->dev, format, ## arg)
#define mlx4_info(mdev, format, arg...) \
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index a5f428bcc0eb..b37867097308 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.4.3-1.375"
+#define MYRI10GE_VERSION_STR "1.4.3-1.378"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
if (tx->req == tx->done) {
tx->queue_active = 0;
put_be32(htonl(1), tx->send_stop);
+ mb();
mmiowb();
}
__netif_tx_unlock(dev_queue);
@@ -2865,6 +2866,7 @@ again:
if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
tx->queue_active = 1;
put_be32(htonl(1), tx->send_go);
+ mb();
mmiowb();
}
tx->pkt_start++;
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 9acb5d70a3ae..d8463b1c3df3 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION);
#ifndef readq
static u64 readq(void __iomem *reg)
{
- return (((u64)readl(reg + 0x4UL) << 32) |
- (u64)readl(reg));
+ return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32);
}
static void writeq(u64 val, void __iomem *reg)
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index fa98af58223e..cd0d0873d978 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -174,8 +174,8 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = {
/* EEPROM range with gPXE configuration */
#define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB
-#define EFX_ETHTOOL_EEPROM_MIN 0x100U
-#define EFX_ETHTOOL_EEPROM_MAX 0x400U
+#define EFX_ETHTOOL_EEPROM_MIN 0x800U
+#define EFX_ETHTOOL_EEPROM_MAX 0x1800U
/**************************************************************************
*
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 5051554ff05b..1f26ab0e7986 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -2050,7 +2050,9 @@ err_out:
*/
static int smc911x_drv_probe(struct platform_device *pdev)
{
+#ifdef SMC_DYNAMIC_BUS_CONFIG
struct smc911x_platdata *pd = pdev->dev.platform_data;
+#endif
struct net_device *ndev;
struct resource *res;
struct smc911x_local *lp;
@@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev)
if (netif_running(ndev)) {
smc911x_reset(ndev);
- smc911x_enable(ndev);
if (lp->phy_type != 0)
smc911x_phy_configure(&lp->phy_configure);
+ smc911x_enable(ndev);
netif_device_attach(ndev);
}
}
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 1164c52e2c0a..8e90891f0e42 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2184,19 +2184,20 @@ static void hso_create_rfkill(struct hso_device *hso_dev,
struct usb_interface *interface)
{
struct hso_net *hso_net = dev2net(hso_dev);
- struct device *dev = hso_dev->dev;
+ struct device *dev = &hso_net->net->dev;
char *rfkn;
hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev,
- RFKILL_TYPE_WLAN);
+ RFKILL_TYPE_WWAN);
if (!hso_net->rfkill) {
- dev_err(dev, "%s - Out of memory", __func__);
+ dev_err(dev, "%s - Out of memory\n", __func__);
return;
}
rfkn = kzalloc(20, GFP_KERNEL);
if (!rfkn) {
rfkill_free(hso_net->rfkill);
- dev_err(dev, "%s - Out of memory", __func__);
+ hso_net->rfkill = NULL;
+ dev_err(dev, "%s - Out of memory\n", __func__);
return;
}
snprintf(rfkn, 20, "hso-%d",
@@ -2209,7 +2210,8 @@ static void hso_create_rfkill(struct hso_device *hso_dev,
kfree(rfkn);
hso_net->rfkill->name = NULL;
rfkill_free(hso_net->rfkill);
- dev_err(dev, "%s - Failed to register rfkill", __func__);
+ hso_net->rfkill = NULL;
+ dev_err(dev, "%s - Failed to register rfkill\n", __func__);
return;
}
}
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 9e47d727e220..cfd4d052d666 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2942,8 +2942,10 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
sc->opmode != NL80211_IFTYPE_MESH_POINT &&
test_bit(ATH_STAT_PROMISC, sc->status))
rfilt |= AR5K_RX_FILTER_PROM;
- if (sc->opmode == NL80211_IFTYPE_ADHOC)
+ if (sc->opmode == NL80211_IFTYPE_STATION ||
+ sc->opmode == NL80211_IFTYPE_ADHOC) {
rfilt |= AR5K_RX_FILTER_BEACON;
+ }
/* Set filters */
ath5k_hw_set_rx_filter(ah,rfilt);
diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c
index dd1374052ba9..5e362a7a3620 100644
--- a/drivers/net/wireless/ath5k/desc.c
+++ b/drivers/net/wireless/ath5k/desc.c
@@ -531,10 +531,10 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
- rs->rs_antenna = rx_status->rx_status_0 &
- AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA;
- rs->rs_more = rx_status->rx_status_0 &
- AR5K_5210_RX_DESC_STATUS0_MORE;
+ rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA);
+ rs->rs_more = !!(rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_MORE);
/* TODO: this timestamp is 13 bit, later on we assume 15 bit */
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
@@ -607,10 +607,10 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
- rs->rs_antenna = rx_status->rx_status_0 &
- AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA;
- rs->rs_more = rx_status->rx_status_0 &
- AR5K_5212_RX_DESC_STATUS0_MORE;
+ rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA);
+ rs->rs_more = !!(rx_status->rx_status_0 &
+ AR5K_5212_RX_DESC_STATUS0_MORE);
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
rs->rs_status = 0;
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index ffdf4876121b..a68f97c39359 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -918,9 +918,12 @@ struct hostap_interface {
/*
* TX meta data - stored in skb->cb buffer, so this must not be increased over
- * the 40-byte limit
+ * the 48-byte limit.
+ * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE
+ * TO SEE THE DAY.
*/
struct hostap_skb_tx_data {
+ unsigned int __padding_for_default_qdiscs;
u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */
u8 rate; /* transmit rate */
#define HOSTAP_TX_FLAGS_WDS BIT(0)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 321dbc8c034a..8d690a0eb1a9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3252,7 +3252,11 @@ static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw,
return;
}
- iwl_scan_cancel_timeout(priv, 100);
+ if (iwl_scan_cancel(priv)) {
+ /* cancel scan failed, just live w/ bad key and rely
+ briefly on SW decryption */
+ return;
+ }
key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 3b0bee331a33..c89365e2ca58 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -896,6 +896,13 @@ static void iwl_bg_request_scan(struct work_struct *data)
return;
done:
+ /* Cannot perform scan. Make sure we clear scanning
+ * bits from status so next scan request can be performed.
+ * If we don't clear scanning status bit here all next scan
+ * will fail
+ */
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ clear_bit(STATUS_SCANNING, &priv->status);
/* inform mac80211 scan aborted */
queue_work(priv->workqueue, &priv->scan_completed);
mutex_unlock(&priv->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index d15a2c997954..285b53e7e261 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -5768,7 +5768,6 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv)
if (priv->error_recovering)
iwl3945_error_recovery(priv);
- ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
return;
restart:
@@ -6013,6 +6012,7 @@ static void iwl3945_bg_alive_start(struct work_struct *data)
mutex_lock(&priv->mutex);
iwl3945_alive_start(priv);
mutex_unlock(&priv->mutex);
+ ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
}
static void iwl3945_bg_rf_kill(struct work_struct *work)
@@ -6256,6 +6256,11 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
n_probes,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+ if (scan->channel_count == 0) {
+ IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count);
+ goto done;
+ }
+
cmd.len += le16_to_cpu(scan->tx_cmd.len) +
scan->channel_count * sizeof(struct iwl3945_scan_channel);
cmd.data = scan;
@@ -6273,6 +6278,14 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
return;
done:
+ /* can not perform scan make sure we clear scanning
+ * bits from status so next scan request can be performed.
+ * if we dont clear scanning status bit here all next scan
+ * will fail
+ */
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ clear_bit(STATUS_SCANNING, &priv->status);
+
/* inform mac80211 scan aborted */
queue_work(priv->workqueue, &priv->scan_completed);
mutex_unlock(&priv->mutex);
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 431e3c78bf27..69eb0132593b 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -48,6 +48,9 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
/* Sitecom */
{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
+ {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+ /* Abocom */
+ {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
{}
};
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index a60ae86bd5c9..a3ccd8c1c716 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -61,6 +61,7 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
@@ -82,6 +83,7 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index d962ba0dd87a..191a3202cecc 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -105,7 +105,7 @@ static int event_buffer_open(struct inode *inode, struct file *file)
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (test_and_set_bit(0, &buffer_opened))
+ if (test_and_set_bit_lock(0, &buffer_opened))
return -EBUSY;
/* Register as a user of dcookies
@@ -129,7 +129,7 @@ static int event_buffer_open(struct inode *inode, struct file *file)
fail:
dcookie_unregister(file->private_data);
out:
- clear_bit(0, &buffer_opened);
+ __clear_bit_unlock(0, &buffer_opened);
return err;
}
@@ -141,7 +141,7 @@ static int event_buffer_release(struct inode *inode, struct file *file)
dcookie_unregister(file->private_data);
buffer_pos = 0;
atomic_set(&buffer_ready, 0);
- clear_bit(0, &buffer_opened);
+ __clear_bit_unlock(0, &buffer_opened);
return 0;
}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index b3a63edb6901..ae5ec76dca77 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -63,7 +63,7 @@ static acpi_status acpi_run_osc(acpi_handle handle,
union acpi_object in_params[4];
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *out_obj;
- u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE];
+ u32 errors, flags = osc_args->capbuf[OSC_QUERY_TYPE];
/* Setting up input parameters */
input.count = 4;
@@ -92,15 +92,16 @@ static acpi_status acpi_run_osc(acpi_handle handle,
status = AE_TYPE;
goto out_kfree;
}
- osc_dw0 = *((u32 *)out_obj->buffer.pointer);
- if (osc_dw0) {
- if (osc_dw0 & OSC_REQUEST_ERROR)
+ /* Need to ignore the bit0 in result code */
+ errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+ if (errors) {
+ if (errors & OSC_REQUEST_ERROR)
printk(KERN_DEBUG "_OSC request fails\n");
- if (osc_dw0 & OSC_INVALID_UUID_ERROR)
+ if (errors & OSC_INVALID_UUID_ERROR)
printk(KERN_DEBUG "_OSC invalid UUID\n");
- if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
+ if (errors & OSC_INVALID_REVISION_ERROR)
printk(KERN_DEBUG "_OSC invalid revision\n");
- if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
+ if (errors & OSC_CAPABILITIES_MASK_ERROR) {
if (flags & OSC_QUERY_ENABLE)
goto out_success;
printk(KERN_DEBUG "_OSC FW not grant req. control\n");
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 110022d78689..5d72866897a8 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -575,7 +575,7 @@ static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct
nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
start = vma->vm_pgoff;
- size = pci_resource_len(pdev, resno) >> PAGE_SHIFT;
+ size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
if (start < size && size - start >= nr)
return 1;
WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bbf66ea8fd87..5049a47030ac 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1692,24 +1692,24 @@ static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
- PCI_DEVICE_ID_NX2_5706,
- quirk_brcm_570x_limit_vpd);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
- PCI_DEVICE_ID_NX2_5706S,
- quirk_brcm_570x_limit_vpd);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
- PCI_DEVICE_ID_NX2_5708,
- quirk_brcm_570x_limit_vpd);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
- PCI_DEVICE_ID_NX2_5708S,
- quirk_brcm_570x_limit_vpd);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
- PCI_DEVICE_ID_NX2_5709,
- quirk_brcm_570x_limit_vpd);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
- PCI_DEVICE_ID_NX2_5709S,
- quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709S,
+ quirk_brcm_570x_limit_vpd);
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 1f5f6143f35c..132a78159b60 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -100,7 +100,8 @@ size_t pci_get_rom_size(void __iomem *rom, size_t size)
* pci_map_rom - map a PCI ROM to kernel space
* @pdev: pointer to pci device struct
* @size: pointer to receive size of pci window over ROM
- * @return: kernel virtual pointer to image of ROM
+ *
+ * Return: kernel virtual pointer to image of ROM
*
* Map a PCI ROM into kernel space. If ROM is boot video ROM,
* the shadow BIOS copy will be returned instead of the
@@ -167,7 +168,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
* pci_map_rom_copy - map a PCI ROM to kernel space, create a copy
* @pdev: pointer to pci device struct
* @size: pointer to receive size of pci window over ROM
- * @return: kernel virtual pointer to image of ROM
+ *
+ * Return: kernel virtual pointer to image of ROM
*
* Map a PCI ROM into kernel space. If ROM is boot video ROM,
* the shadow BIOS copy will be returned instead of the
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 85edf945ab86..204158cf7a55 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
+#include <asm/smp.h>
#include <asm/time.h>
#include <asm/ps3.h>
#include <asm/lv1call.h>
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4dada6ee1119..39360e2a4540 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1,6 +1,4 @@
-menu "Voltage and Current regulators"
-
-config REGULATOR
+menuconfig REGULATOR
bool "Voltage and Current Regulator Support"
default n
help
@@ -23,21 +21,20 @@ config REGULATOR
If unsure, say no.
+if REGULATOR
+
config REGULATOR_DEBUG
bool "Regulator debug support"
- depends on REGULATOR
help
Say yes here to enable debugging support.
config REGULATOR_FIXED_VOLTAGE
tristate
default n
- select REGULATOR
config REGULATOR_VIRTUAL_CONSUMER
tristate "Virtual regulator consumer support"
default n
- select REGULATOR
help
This driver provides a virtual consumer for the voltage and
current regulator API which provides sysfs controls for
@@ -49,7 +46,6 @@ config REGULATOR_VIRTUAL_CONSUMER
config REGULATOR_BQ24022
tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
default n
- select REGULATOR
help
This driver controls a TI bq24022 Charger attached via
GPIOs. The provided current regulator can enable/disable
@@ -59,7 +55,6 @@ config REGULATOR_BQ24022
config REGULATOR_WM8350
tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
depends on MFD_WM8350
- select REGULATOR
help
This driver provides support for the voltage and current regulators
of the WM8350 AudioPlus PMIC.
@@ -67,7 +62,6 @@ config REGULATOR_WM8350
config REGULATOR_WM8400
tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC"
depends on MFD_WM8400
- select REGULATOR
help
This driver provides support for the voltage regulators of the
WM8400 AudioPlus PMIC.
@@ -75,9 +69,8 @@ config REGULATOR_WM8400
config REGULATOR_DA903X
tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
depends on PMIC_DA903X
- select REGULATOR
help
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
-endmenu
+endif
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8abbb2020af9..123092d8a984 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -277,6 +277,14 @@ config RTC_DRV_FM3130
This driver can also be built as a module. If so the module
will be called rtc-fm3130.
+config RTC_DRV_RX8581
+ tristate "Epson RX-8581"
+ help
+ If you say yes here you will get support for the Epson RX-8581.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-rx8581.
+
endif # I2C
comment "SPI RTC drivers"
@@ -302,6 +310,17 @@ config RTC_DRV_DS1305
This driver can also be built as a module. If so, the module
will be called rtc-ds1305.
+config RTC_DRV_DS1390
+ tristate "Dallas/Maxim DS1390/93/94"
+ help
+ If you say yes here you get support for the DS1390/93/94 chips.
+
+ This driver only supports the RTC feature, and not other chip
+ features such as alarms and trickle charging.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1390.
+
config RTC_DRV_MAX6902
tristate "Maxim MAX6902"
help
@@ -468,6 +487,16 @@ config RTC_DRV_V3020
This driver can also be built as a module. If so, the module
will be called rtc-v3020.
+config RTC_DRV_WM8350
+ tristate "Wolfson Microelectronics WM8350 RTC"
+ depends on MFD_WM8350
+ help
+ If you say yes here you will get support for the RTC subsystem
+ of the Wolfson Microelectronics WM8350.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-wm8350".
+
comment "on-CPU RTC drivers"
config RTC_DRV_OMAP
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index e9e8474cc8fe..6e79c912bf9e 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o
obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o
obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o
+obj-$(CONFIG_RTC_DRV_DS1390) += rtc-ds1390.o
obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o
obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
@@ -57,6 +58,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o
@@ -66,4 +68,5 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 7af60b98d8a4..a04c1b6b1575 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -271,7 +271,7 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year");
do {
alarm->time.tm_year++;
- } while (!rtc_valid_tm(&alarm->time));
+ } while (rtc_valid_tm(&alarm->time) != 0);
break;
default:
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 5549231179a2..6cf8e282338f 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -794,7 +794,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
goto cleanup2;
}
- pr_info("%s: alarms up to one %s%s, %zd bytes nvram, %s irqs\n",
+ pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n",
cmos_rtc.rtc->dev.bus_id,
is_valid_irq(rtc_irq)
? (cmos_rtc.mon_alrm
diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c
new file mode 100644
index 000000000000..599e976bf014
--- /dev/null
+++ b/drivers/rtc/rtc-ds1390.c
@@ -0,0 +1,220 @@
+/*
+ * rtc-ds1390.c -- driver for DS1390/93/94
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ * Written by Mark Jackson <mpfj@mimc.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE : Currently this driver only supports the bare minimum for read
+ * and write the RTC. The extra features provided by the chip family
+ * (alarms, trickle charger, different control registers) are unavailable.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define DS1390_REG_100THS 0x00
+#define DS1390_REG_SECONDS 0x01
+#define DS1390_REG_MINUTES 0x02
+#define DS1390_REG_HOURS 0x03
+#define DS1390_REG_DAY 0x04
+#define DS1390_REG_DATE 0x05
+#define DS1390_REG_MONTH_CENT 0x06
+#define DS1390_REG_YEAR 0x07
+
+#define DS1390_REG_ALARM_100THS 0x08
+#define DS1390_REG_ALARM_SECONDS 0x09
+#define DS1390_REG_ALARM_MINUTES 0x0A
+#define DS1390_REG_ALARM_HOURS 0x0B
+#define DS1390_REG_ALARM_DAY_DATE 0x0C
+
+#define DS1390_REG_CONTROL 0x0D
+#define DS1390_REG_STATUS 0x0E
+#define DS1390_REG_TRICKLE 0x0F
+
+struct ds1390 {
+ struct rtc_device *rtc;
+ u8 txrx_buf[9]; /* cmd + 8 registers */
+};
+
+static void ds1390_set_reg(struct device *dev, unsigned char address,
+ unsigned char data)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct ds1390 *chip = dev_get_drvdata(dev);
+
+ /* Set MSB to indicate write */
+ chip->txrx_buf[0] = address | 0x80;
+ chip->txrx_buf[1] = data;
+
+ /* do the i/o */
+ spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0);
+}
+
+static int ds1390_get_reg(struct device *dev, unsigned char address,
+ unsigned char *data)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct ds1390 *chip = dev_get_drvdata(dev);
+ int status;
+
+ if (!data)
+ return -EINVAL;
+
+ /* Clear MSB to indicate read */
+ chip->txrx_buf[0] = address & 0x7f;
+ /* do the i/o */
+ status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1);
+ if (status != 0)
+ return status;
+
+ *data = chip->txrx_buf[1];
+
+ return 0;
+}
+
+static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct ds1390 *chip = dev_get_drvdata(dev);
+ int status;
+
+ /* build the message */
+ chip->txrx_buf[0] = DS1390_REG_SECONDS;
+
+ /* do the i/o */
+ status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8);
+ if (status != 0)
+ return status;
+
+ /* The chip sends data in this order:
+ * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */
+ dt->tm_sec = bcd2bin(chip->txrx_buf[0]);
+ dt->tm_min = bcd2bin(chip->txrx_buf[1]);
+ dt->tm_hour = bcd2bin(chip->txrx_buf[2]);
+ dt->tm_wday = bcd2bin(chip->txrx_buf[3]);
+ dt->tm_mday = bcd2bin(chip->txrx_buf[4]);
+ /* mask off century bit */
+ dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1;
+ /* adjust for century bit */
+ dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0);
+
+ return rtc_valid_tm(dt);
+}
+
+static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct ds1390 *chip = dev_get_drvdata(dev);
+
+ /* build the message */
+ chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80;
+ chip->txrx_buf[1] = bin2bcd(dt->tm_sec);
+ chip->txrx_buf[2] = bin2bcd(dt->tm_min);
+ chip->txrx_buf[3] = bin2bcd(dt->tm_hour);
+ chip->txrx_buf[4] = bin2bcd(dt->tm_wday);
+ chip->txrx_buf[5] = bin2bcd(dt->tm_mday);
+ chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) |
+ ((dt->tm_year > 99) ? 0x80 : 0x00);
+ chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100);
+
+ /* do the i/o */
+ return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0);
+}
+
+static int ds1390_read_time(struct device *dev, struct rtc_time *tm)
+{
+ return ds1390_get_datetime(dev, tm);
+}
+
+static int ds1390_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return ds1390_set_datetime(dev, tm);
+}
+
+static const struct rtc_class_ops ds1390_rtc_ops = {
+ .read_time = ds1390_read_time,
+ .set_time = ds1390_set_time,
+};
+
+static int __devinit ds1390_probe(struct spi_device *spi)
+{
+ struct rtc_device *rtc;
+ unsigned char tmp;
+ struct ds1390 *chip;
+ int res;
+
+ printk(KERN_DEBUG "DS1390 SPI RTC driver\n");
+
+ rtc = rtc_device_register("ds1390",
+ &spi->dev, &ds1390_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ printk(KERN_ALERT "RTC : unable to register device\n");
+ return PTR_ERR(rtc);
+ }
+
+ spi->mode = SPI_MODE_3;
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ chip = kzalloc(sizeof *chip, GFP_KERNEL);
+ if (!chip) {
+ printk(KERN_ALERT "RTC : unable to allocate device memory\n");
+ rtc_device_unregister(rtc);
+ return -ENOMEM;
+ }
+ chip->rtc = rtc;
+ dev_set_drvdata(&spi->dev, chip);
+
+ res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp);
+ if (res) {
+ printk(KERN_ALERT "RTC : unable to read device\n");
+ rtc_device_unregister(rtc);
+ return res;
+ }
+
+ return 0;
+}
+
+static int __devexit ds1390_remove(struct spi_device *spi)
+{
+ struct ds1390 *chip = platform_get_drvdata(spi);
+ struct rtc_device *rtc = chip->rtc;
+
+ if (rtc)
+ rtc_device_unregister(rtc);
+
+ kfree(chip);
+
+ return 0;
+}
+
+static struct spi_driver ds1390_driver = {
+ .driver = {
+ .name = "rtc-ds1390",
+ .owner = THIS_MODULE,
+ },
+ .probe = ds1390_probe,
+ .remove = __devexit_p(ds1390_remove),
+};
+
+static __init int ds1390_init(void)
+{
+ return spi_register_driver(&ds1390_driver);
+}
+module_init(ds1390_init);
+
+static __exit void ds1390_exit(void)
+{
+ spi_unregister_driver(&ds1390_driver);
+}
+module_exit(ds1390_exit);
+
+MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver");
+MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
new file mode 100644
index 000000000000..c9522f3bc21c
--- /dev/null
+++ b/drivers/rtc/rtc-rx8581.c
@@ -0,0 +1,281 @@
+/*
+ * An I2C driver for the Epson RX8581 RTC
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
+ * Copyright 2005-06 Tower Technologies
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/log2.h>
+
+#define DRV_VERSION "0.1"
+
+#define RX8581_REG_SC 0x00 /* Second in BCD */
+#define RX8581_REG_MN 0x01 /* Minute in BCD */
+#define RX8581_REG_HR 0x02 /* Hour in BCD */
+#define RX8581_REG_DW 0x03 /* Day of Week */
+#define RX8581_REG_DM 0x04 /* Day of Month in BCD */
+#define RX8581_REG_MO 0x05 /* Month in BCD */
+#define RX8581_REG_YR 0x06 /* Year in BCD */
+#define RX8581_REG_RAM 0x07 /* RAM */
+#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/
+#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */
+#define RX8581_REG_ADM 0x0A
+#define RX8581_REG_ADW 0x0A
+#define RX8581_REG_TMR0 0x0B
+#define RX8581_REG_TMR1 0x0C
+#define RX8581_REG_EXT 0x0D /* Extension Register */
+#define RX8581_REG_FLAG 0x0E /* Flag Register */
+#define RX8581_REG_CTRL 0x0F /* Control Register */
+
+
+/* Flag Register bit definitions */
+#define RX8581_FLAG_UF 0x20 /* Update */
+#define RX8581_FLAG_TF 0x10 /* Timer */
+#define RX8581_FLAG_AF 0x08 /* Alarm */
+#define RX8581_FLAG_VLF 0x02 /* Voltage Low */
+
+/* Control Register bit definitions */
+#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */
+#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
+#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
+#define RX8581_CTRL_STOP 0x02 /* STOP bit */
+#define RX8581_CTRL_RESET 0x01 /* RESET bit */
+
+static struct i2c_driver rx8581_driver;
+
+/*
+ * In the routines that deal directly with the rx8581 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ unsigned char date[7];
+ int data, err;
+
+ /* First we ensure that the "update flag" is not set, we read the
+ * time and date then re-read the "update flag". If the update flag
+ * has been set, we know that the time has changed during the read so
+ * we repeat the whole process again.
+ */
+ data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+ if (data < 0) {
+ dev_err(&client->dev, "Unable to read device flags\n");
+ return -EIO;
+ }
+
+ do {
+ /* If update flag set, clear it */
+ if (data & RX8581_FLAG_UF) {
+ err = i2c_smbus_write_byte_data(client,
+ RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
+ if (err != 0) {
+ dev_err(&client->dev, "Unable to write device "
+ "flags\n");
+ return -EIO;
+ }
+ }
+
+ /* Now read time and date */
+ err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC,
+ 7, date);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to read date\n");
+ return -EIO;
+ }
+
+ /* Check flag register */
+ data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+ if (data < 0) {
+ dev_err(&client->dev, "Unable to read device flags\n");
+ return -EIO;
+ }
+ } while (data & RX8581_FLAG_UF);
+
+ if (data & RX8581_FLAG_VLF)
+ dev_info(&client->dev,
+ "low voltage detected, date/time is not reliable.\n");
+
+ dev_dbg(&client->dev,
+ "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+ "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
+ __func__,
+ date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
+
+ tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
+ tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
+ tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
+ tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
+ tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
+ tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+ tm->tm_year = bcd2bin(date[RX8581_REG_YR]);
+ if (tm->tm_year < 70)
+ tm->tm_year += 100; /* assume we are in 1970...2069 */
+
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ err = rtc_valid_tm(tm);
+ if (err < 0)
+ dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+ return err;
+}
+
+static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ int data, err;
+ unsigned char buf[7];
+
+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ /* hours, minutes and seconds */
+ buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
+ buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
+ buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
+
+ buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
+
+ /* month, 1 - 12 */
+ buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
+
+ /* year and century */
+ buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100);
+ buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
+
+ /* Stop the clock */
+ data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
+ if (data < 0) {
+ dev_err(&client->dev, "Unable to read control register\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+ (data | RX8581_CTRL_STOP));
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write control register\n");
+ return -EIO;
+ }
+
+ /* write register's data */
+ err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write to date registers\n");
+ return -EIO;
+ }
+
+ /* Restart the clock */
+ data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
+ if (data < 0) {
+ dev_err(&client->dev, "Unable to read control register\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+ (data | ~(RX8581_CTRL_STOP)));
+ if (err != 0) {
+ dev_err(&client->dev, "Unable to write control register\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ return rx8581_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return rx8581_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops rx8581_rtc_ops = {
+ .read_time = rx8581_rtc_read_time,
+ .set_time = rx8581_rtc_set_time,
+};
+
+static int __devinit rx8581_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct rtc_device *rtc;
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
+
+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+ rtc = rtc_device_register(rx8581_driver.driver.name,
+ &client->dev, &rx8581_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ i2c_set_clientdata(client, rtc);
+
+ return 0;
+}
+
+static int __devexit rx8581_remove(struct i2c_client *client)
+{
+ struct rtc_device *rtc = i2c_get_clientdata(client);
+
+ rtc_device_unregister(rtc);
+
+ return 0;
+}
+
+static const struct i2c_device_id rx8581_id[] = {
+ { "rx8581", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rx8581_id);
+
+static struct i2c_driver rx8581_driver = {
+ .driver = {
+ .name = "rtc-rx8581",
+ .owner = THIS_MODULE,
+ },
+ .probe = rx8581_probe,
+ .remove = __devexit_p(rx8581_remove),
+ .id_table = rx8581_id,
+};
+
+static int __init rx8581_init(void)
+{
+ return i2c_add_driver(&rx8581_driver);
+}
+
+static void __exit rx8581_exit(void)
+{
+ i2c_del_driver(&rx8581_driver);
+}
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>");
+MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(rx8581_init);
+module_exit(rx8581_exit);
diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c
new file mode 100644
index 000000000000..5c5e3aa91385
--- /dev/null
+++ b/drivers/rtc/rtc-wm8350.c
@@ -0,0 +1,514 @@
+/*
+ * Real Time Clock driver for Wolfson Microelectronics WM8350
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood
+ * linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm8350/rtc.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#define WM8350_SET_ALM_RETRIES 5
+#define WM8350_SET_TIME_RETRIES 5
+#define WM8350_GET_TIME_RETRIES 5
+
+#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev)
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(dev);
+ u16 time1[4], time2[4];
+ int retries = WM8350_GET_TIME_RETRIES, ret;
+
+ /*
+ * Read the time twice and compare.
+ * If time1 == time2, then time is valid else retry.
+ */
+ do {
+ ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+ 4, time1);
+ if (ret < 0)
+ return ret;
+ ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+ 4, time2);
+ if (ret < 0)
+ return ret;
+
+ if (memcmp(time1, time2, sizeof(time1)) == 0) {
+ tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK;
+
+ tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK)
+ >> WM8350_RTC_MINS_SHIFT;
+
+ tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK;
+
+ tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT)
+ & 0x7) - 1;
+
+ tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK)
+ >> WM8350_RTC_MTH_SHIFT) - 1;
+
+ tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK);
+
+ tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK)
+ >> WM8350_RTC_YHUNDREDS_SHIFT) * 100;
+ tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK;
+
+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon,
+ tm->tm_year);
+ tm->tm_year -= 1900;
+
+ dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n",
+ retries,
+ time1[0], time1[1], time1[2], time1[3]);
+
+ return 0;
+ }
+ } while (retries--);
+
+ dev_err(dev, "timed out reading RTC time\n");
+ return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(dev);
+ u16 time[4];
+ u16 rtc_ctrl;
+ int ret, retries = WM8350_SET_TIME_RETRIES;
+
+ time[0] = tm->tm_sec;
+ time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT;
+ time[1] = tm->tm_hour;
+ time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT;
+ time[2] = tm->tm_mday;
+ time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT;
+ time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT;
+ time[3] |= (tm->tm_year + 1900) % 100;
+
+ dev_dbg(dev, "Setting: %04x %04x %04x %04x\n",
+ time[0], time[1], time[2], time[3]);
+
+ /* Set RTC_SET to stop the clock */
+ ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET);
+ if (ret < 0)
+ return ret;
+
+ /* Wait until confirmation of stopping */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+ } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS));
+
+ if (!retries) {
+ dev_err(dev, "timed out on set confirmation\n");
+ return -EIO;
+ }
+
+ /* Write time to RTC */
+ ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time);
+ if (ret < 0)
+ return ret;
+
+ /* Clear RTC_SET to start the clock */
+ ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+ WM8350_RTC_SET);
+ return ret;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alrm->time;
+ u16 time[4];
+ int ret;
+
+ ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time);
+ if (ret < 0)
+ return ret;
+
+ tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK;
+ if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK)
+ tm->tm_sec = -1;
+
+ tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK;
+ if (tm->tm_min == WM8350_RTC_ALMMINS_MASK)
+ tm->tm_min = -1;
+ else
+ tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT;
+
+ tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK;
+ if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK)
+ tm->tm_hour = -1;
+
+ tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1;
+ if (tm->tm_wday > 7)
+ tm->tm_wday = -1;
+
+ tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK;
+ if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK)
+ tm->tm_mon = -1;
+ else
+ tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1;
+
+ tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK);
+ if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK)
+ tm->tm_mday = -1;
+
+ tm->tm_year = -1;
+
+ alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS);
+
+ return 0;
+}
+
+static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350)
+{
+ int retries = WM8350_SET_ALM_RETRIES;
+ u16 rtc_ctrl;
+ int ret;
+
+ /* Set RTC_SET to stop the clock */
+ ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+ WM8350_RTC_ALMSET);
+ if (ret < 0)
+ return ret;
+
+ /* Wait until confirmation of stopping */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+ } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS));
+
+ if (!(rtc_ctrl & WM8350_RTC_ALMSTS))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int wm8350_rtc_start_alarm(struct wm8350 *wm8350)
+{
+ int ret;
+ int retries = WM8350_SET_ALM_RETRIES;
+ u16 rtc_ctrl;
+
+ ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+ WM8350_RTC_ALMSET);
+ if (ret < 0)
+ return ret;
+
+ /* Wait until confirmation */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+ } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS);
+
+ if (rtc_ctrl & WM8350_RTC_ALMSTS)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alrm->time;
+ u16 time[3];
+ int ret;
+
+ memset(time, 0, sizeof(time));
+
+ if (tm->tm_sec != -1)
+ time[0] |= tm->tm_sec;
+ else
+ time[0] |= WM8350_RTC_ALMSECS_MASK;
+
+ if (tm->tm_min != -1)
+ time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT;
+ else
+ time[0] |= WM8350_RTC_ALMMINS_MASK;
+
+ if (tm->tm_hour != -1)
+ time[1] |= tm->tm_hour;
+ else
+ time[1] |= WM8350_RTC_ALMHRS_MASK;
+
+ if (tm->tm_wday != -1)
+ time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT;
+ else
+ time[1] |= WM8350_RTC_ALMDAY_MASK;
+
+ if (tm->tm_mday != -1)
+ time[2] |= tm->tm_mday;
+ else
+ time[2] |= WM8350_RTC_ALMDATE_MASK;
+
+ if (tm->tm_mon != -1)
+ time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT;
+ else
+ time[2] |= WM8350_RTC_ALMMTH_MASK;
+
+ ret = wm8350_rtc_stop_alarm(wm8350);
+ if (ret < 0)
+ return ret;
+
+ /* Write time to RTC */
+ ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES,
+ 3, time);
+ if (ret < 0)
+ return ret;
+
+ if (alrm->enabled)
+ ret = wm8350_rtc_start_alarm(wm8350);
+
+ return ret;
+}
+
+/*
+ * Handle commands from user-space
+ */
+static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd,
+ unsigned long arg)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(dev);
+
+ switch (cmd) {
+ case RTC_AIE_OFF:
+ return wm8350_rtc_stop_alarm(wm8350);
+ case RTC_AIE_ON:
+ return wm8350_rtc_start_alarm(wm8350);
+
+ case RTC_UIE_OFF:
+ wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+ break;
+ case RTC_UIE_ON:
+ wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+ break;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+
+ return 0;
+}
+
+static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq,
+ void *data)
+{
+ struct rtc_device *rtc = wm8350->rtc.rtc;
+ int ret;
+
+ rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+ /* Make it one shot */
+ ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+ WM8350_RTC_ALMSET);
+ if (ret != 0) {
+ dev_err(&(wm8350->rtc.pdev->dev),
+ "Failed to disable alarm: %d\n", ret);
+ }
+}
+
+static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq,
+ void *data)
+{
+ struct rtc_device *rtc = wm8350->rtc.rtc;
+
+ rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF);
+}
+
+static const struct rtc_class_ops wm8350_rtc_ops = {
+ .ioctl = wm8350_rtc_ioctl,
+ .read_time = wm8350_rtc_readtime,
+ .set_time = wm8350_rtc_settime,
+ .read_alarm = wm8350_rtc_readalarm,
+ .set_alarm = wm8350_rtc_setalarm,
+};
+
+#ifdef CONFIG_PM
+static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+ int ret = 0;
+ u16 reg;
+
+ reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+
+ if (device_may_wakeup(&wm8350->rtc.pdev->dev) &&
+ reg & WM8350_RTC_ALMSTS) {
+ ret = wm8350_rtc_stop_alarm(wm8350);
+ if (ret != 0)
+ dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+
+static int wm8350_rtc_resume(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+ int ret;
+
+ if (wm8350->rtc.alarm_enabled) {
+ ret = wm8350_rtc_start_alarm(wm8350);
+ if (ret != 0)
+ dev_err(&pdev->dev,
+ "Failed to restart RTC alarm: %d\n", ret);
+ }
+
+ return 0;
+}
+
+#else
+#define wm8350_rtc_suspend NULL
+#define wm8350_rtc_resume NULL
+#endif
+
+static int wm8350_rtc_probe(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+ struct wm8350_rtc *wm_rtc = &wm8350->rtc;
+ int ret = 0;
+ u16 timectl, power5;
+
+ timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+ if (timectl & WM8350_RTC_BCD) {
+ dev_err(&pdev->dev, "RTC BCD mode not supported\n");
+ return -EINVAL;
+ }
+ if (timectl & WM8350_RTC_12HR) {
+ dev_err(&pdev->dev, "RTC 12 hour mode not supported\n");
+ return -EINVAL;
+ }
+
+ /* enable the RTC if it's not already enabled */
+ power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+ if (!(power5 & WM8350_RTC_TICK_ENA)) {
+ dev_info(wm8350->dev, "Starting RTC\n");
+
+ wm8350_reg_unlock(wm8350);
+
+ ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5,
+ WM8350_RTC_TICK_ENA);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret);
+ return ret;
+ }
+
+ wm8350_reg_lock(wm8350);
+ }
+
+ if (timectl & WM8350_RTC_STS) {
+ int retries;
+
+ ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+ WM8350_RTC_SET);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to start: %d\n", ret);
+ return ret;
+ }
+
+ retries = WM8350_SET_TIME_RETRIES;
+ do {
+ timectl = wm8350_reg_read(wm8350,
+ WM8350_RTC_TIME_CONTROL);
+ } while (timectl & WM8350_RTC_STS && retries--);
+
+ if (retries == 0) {
+ dev_err(&pdev->dev, "failed to start: timeout\n");
+ return -ENODEV;
+ }
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev,
+ &wm8350_rtc_ops, THIS_MODULE);
+ if (IS_ERR(wm_rtc->rtc)) {
+ ret = PTR_ERR(wm_rtc->rtc);
+ dev_err(&pdev->dev, "failed to register RTC: %d\n", ret);
+ return ret;
+ }
+
+ wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+ wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER);
+
+ wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC,
+ wm8350_rtc_update_handler, NULL);
+
+ wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM,
+ wm8350_rtc_alarm_handler, NULL);
+ wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM);
+
+ return 0;
+}
+
+static int __devexit wm8350_rtc_remove(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+ struct wm8350_rtc *wm_rtc = &wm8350->rtc;
+
+ wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+
+ wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC);
+ wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM);
+
+ rtc_device_unregister(wm_rtc->rtc);
+
+ return 0;
+}
+
+static struct platform_driver wm8350_rtc_driver = {
+ .probe = wm8350_rtc_probe,
+ .remove = __devexit_p(wm8350_rtc_remove),
+ .suspend = wm8350_rtc_suspend,
+ .resume = wm8350_rtc_resume,
+ .driver = {
+ .name = "wm8350-rtc",
+ },
+};
+
+static int __init wm8350_rtc_init(void)
+{
+ return platform_driver_register(&wm8350_rtc_driver);
+}
+module_init(wm8350_rtc_init);
+
+static void __exit wm8350_rtc_exit(void)
+{
+ platform_driver_unregister(&wm8350_rtc_driver);
+}
+module_exit(wm8350_rtc_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM8350");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-rtc");
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 61fb8b6d19af..d5efd6c77904 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1258,6 +1258,8 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_port->clk = clk_get(&pdev->dev, "usart");
clk_enable(atmel_port->clk);
port->uartclk = clk_get_rate(atmel_port->clk);
+ clk_disable(atmel_port->clk);
+ /* only enable clock when USART is in use */
}
atmel_port->use_dma_rx = data->use_dma_rx;
@@ -1379,6 +1381,8 @@ static int __init atmel_console_setup(struct console *co, char *options)
return -ENODEV;
}
+ clk_enable(atmel_ports[co->index].clk);
+
UART_PUT_IDR(port, -1);
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
@@ -1403,7 +1407,7 @@ static struct console atmel_console = {
.data = &atmel_uart,
};
-#define ATMEL_CONSOLE_DEVICE &atmel_console
+#define ATMEL_CONSOLE_DEVICE (&atmel_console)
/*
* Early console initialization (before VM subsystem initialized).
@@ -1534,6 +1538,15 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
if (ret)
goto err_add_port;
+ if (atmel_is_console_port(&port->uart)
+ && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
+ /*
+ * The serial core enabled the clock for us, so undo
+ * the clk_enable() in atmel_console_setup()
+ */
+ clk_disable(port->clk);
+ }
+
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);
@@ -1544,7 +1557,6 @@ err_add_port:
port->rx_ring.buf = NULL;
err_alloc_ring:
if (!atmel_is_console_port(&port->uart)) {
- clk_disable(port->clk);
clk_put(port->clk);
port->clk = NULL;
}
@@ -1568,7 +1580,6 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev)
/* "port" is allocated statically, so we shouldn't free it */
- clk_disable(atmel_port->clk);
clk_put(atmel_port->clk);
return ret;
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 02f9320f3efc..8abae4ad0fa5 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -766,6 +766,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
/* Initialize the hardware */
clk_enable(clk);
spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
spi_writel(as, CR, SPI_BIT(SPIEN));
@@ -782,6 +783,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
out_reset_hw:
spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
clk_disable(clk);
free_irq(irq, master);
out_unmap_regs:
@@ -805,6 +807,7 @@ static int __exit atmel_spi_remove(struct platform_device *pdev)
spin_lock_irq(&as->lock);
as->stopping = 1;
spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
spi_readl(as, SR);
spin_unlock_irq(&as->lock);
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 307b1f62d949..b1b947edcf01 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -1,10 +1,11 @@
-menu "Sonics Silicon Backplane"
-
config SSB_POSSIBLE
bool
depends on HAS_IOMEM && HAS_DMA
default y
+menu "Sonics Silicon Backplane"
+ depends on SSB_POSSIBLE
+
config SSB
tristate "Sonics Silicon Backplane support"
depends on SSB_POSSIBLE
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index e1654f59eb70..c95b286a1239 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -21,7 +21,23 @@ menuconfig STAGING
If in doubt, say N here.
-if STAGING
+
+config STAGING_EXCLUDE_BUILD
+ bool "Exclude Staging drivers from being built" if STAGING
+ default y
+ ---help---
+ Are you sure you really want to build the staging drivers?
+ They taint your kernel, don't live up to the normal Linux
+ kernel quality standards, are a bit crufty around the edges,
+ and might go off and kick your dog when you aren't paying
+ attention.
+
+ Say N here to be able to select and build the Staging drivers.
+ This option is primarily here to prevent them from being built
+ when selecting 'make allyesconfg' and 'make allmodconfig' so
+ don't be all that put off, your dog will be just fine.
+
+if !STAGING_EXCLUDE_BUILD
source "drivers/staging/et131x/Kconfig"
@@ -45,4 +61,4 @@ source "drivers/staging/at76_usb/Kconfig"
source "drivers/staging/poch/Kconfig"
-endif # STAGING
+endif # !STAGING_EXCLUDE_BUILD
diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 7426235ccc44..217fb7e62c2f 100644
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,6 +1,6 @@
config USB_IP_COMMON
tristate "USB IP support (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
+ depends on USB && NET && EXPERIMENTAL
default N
---help---
This enables pushing USB packets over IP to allow remote
diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c
index 37caf4d69037..b52cc830c0b4 100644
--- a/drivers/telephony/phonedev.c
+++ b/drivers/telephony/phonedev.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Author: Alan Cox, <alan@redhat.com>
+ * Author: Alan Cox, <alan@lxorguk.ukuu.org.uk>
*
* Fixes: Mar 01 2000 Thomas Sparr, <thomas.l.sparr@telia.com>
* phone_register_device now works with unit!=PHONE_UNIT_ANY
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index b679a556b98d..4e2cda93da59 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -26,7 +26,7 @@
* Introduced common header to be used also in USB Gadget Framework.
* Still needs some other style fixes.
*
- * 2007_Jun_21 Alan Cox <alan@redhat.com>
+ * 2007_Jun_21 Alan Cox <alan@lxorguk.ukuu.org.uk>
* Minimal cleanups for some of the driver problens and tty layer abuse.
* Still needs fixing to allow multiple dongles.
*
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0f13448c6f79..3f3ce13fef43 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2083,6 +2083,38 @@ config FB_METRONOME
controller. The pre-release name for this device was 8track
and could also have been called by some vendors as PVI-nnnn.
+config FB_MB862XX
+ tristate "Fujitsu MB862xx GDC support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+config FB_MB862XX_PCI_GDC
+ bool "Carmine/Coral-P(A) GDC"
+ depends on PCI && FB_MB862XX
+ ---help---
+ This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+ PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+ bool "Lime GDC"
+ depends on FB_MB862XX
+ depends on OF && !FB_MB862XX_PCI_GDC
+ select FB_FOREIGN_ENDIAN
+ select FB_LITTLE_ENDIAN
+ ---help---
+ Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+config FB_PRE_INIT_FB
+ bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+ depends on FB_MB862XX_LIME
+ ---help---
+ Select this option if display contents should be inherited as set by
+ the bootloader.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 248bddc8d0b0..e39e33e797da 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -122,6 +122,7 @@ obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
obj-$(CONFIG_FB_OMAP) += omap/
obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
obj-$(CONFIG_FB_CARMINE) += carminefb.o
+obj-$(CONFIG_FB_MB862XX) += mb862xx/
# Platform or fallback drivers go here
obj-$(CONFIG_FB_UVESA) += uvesafb.o
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 6048b55f2878..1d5ae39cb271 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1002,13 +1002,9 @@ fb_blank(struct fb_info *info, int blank)
return ret;
}
-static long
-fb_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
+static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
{
- struct inode *inode = file->f_path.dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info;
struct fb_ops *fb;
struct fb_var_screeninfo var;
struct fb_fix_screeninfo fix;
@@ -1018,14 +1014,10 @@ fb_ioctl(struct file *file, unsigned int cmd,
void __user *argp = (void __user *)arg;
long ret = 0;
- info = registered_fb[fbidx];
- mutex_lock(&info->lock);
fb = info->fbops;
-
- if (!fb) {
- mutex_unlock(&info->lock);
+ if (!fb)
return -ENODEV;
- }
+
switch (cmd) {
case FBIOGET_VSCREENINFO:
ret = copy_to_user(argp, &info->var,
@@ -1126,6 +1118,21 @@ fb_ioctl(struct file *file, unsigned int cmd,
else
ret = fb->fb_ioctl(info, cmd, arg);
}
+ return ret;
+}
+
+static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+__acquires(&info->lock)
+__releases(&info->lock)
+{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ int fbidx = iminor(inode);
+ struct fb_info *info;
+ long ret;
+
+ info = registered_fb[fbidx];
+ mutex_lock(&info->lock);
+ ret = do_fb_ioctl(info, cmd, arg);
mutex_unlock(&info->lock);
return ret;
}
@@ -1157,8 +1164,8 @@ struct fb_cmap32 {
compat_caddr_t transp;
};
-static int fb_getput_cmap(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int fb_getput_cmap(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
{
struct fb_cmap_user __user *cmap;
struct fb_cmap32 __user *cmap32;
@@ -1181,7 +1188,7 @@ static int fb_getput_cmap(struct inode *inode, struct file *file,
put_user(compat_ptr(data), &cmap->transp))
return -EFAULT;
- err = fb_ioctl(file, cmd, (unsigned long) cmap);
+ err = do_fb_ioctl(info, cmd, (unsigned long) cmap);
if (!err) {
if (copy_in_user(&cmap32->start,
@@ -1223,8 +1230,8 @@ static int do_fscreeninfo_to_user(struct fb_fix_screeninfo *fix,
return err;
}
-static int fb_get_fscreeninfo(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
{
mm_segment_t old_fs;
struct fb_fix_screeninfo fix;
@@ -1235,7 +1242,7 @@ static int fb_get_fscreeninfo(struct inode *inode, struct file *file,
old_fs = get_fs();
set_fs(KERNEL_DS);
- err = fb_ioctl(file, cmd, (unsigned long) &fix);
+ err = do_fb_ioctl(info, cmd, (unsigned long) &fix);
set_fs(old_fs);
if (!err)
@@ -1244,8 +1251,10 @@ static int fb_get_fscreeninfo(struct inode *inode, struct file *file,
return err;
}
-static long
-fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static long fb_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+__acquires(&info->lock)
+__releases(&info->lock)
{
struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
@@ -1262,16 +1271,16 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case FBIOPUT_CON2FBMAP:
arg = (unsigned long) compat_ptr(arg);
case FBIOBLANK:
- mutex_unlock(&info->lock);
- return fb_ioctl(file, cmd, arg);
+ ret = do_fb_ioctl(info, cmd, arg);
+ break;
case FBIOGET_FSCREENINFO:
- ret = fb_get_fscreeninfo(inode, file, cmd, arg);
+ ret = fb_get_fscreeninfo(info, cmd, arg);
break;
case FBIOGETCMAP:
case FBIOPUTCMAP:
- ret = fb_getput_cmap(inode, file, cmd, arg);
+ ret = fb_getput_cmap(info, cmd, arg);
break;
default:
@@ -1286,6 +1295,8 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
+__acquires(&info->lock)
+__releases(&info->lock)
{
int fbidx = iminor(file->f_path.dentry->d_inode);
struct fb_info *info = registered_fb[fbidx];
@@ -1339,6 +1350,8 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)
static int
fb_open(struct inode *inode, struct file *file)
+__acquires(&info->lock)
+__releases(&info->lock)
{
int fbidx = iminor(inode);
struct fb_info *info;
@@ -1374,6 +1387,8 @@ out:
static int
fb_release(struct inode *inode, struct file *file)
+__acquires(&info->lock)
+__releases(&info->lock)
{
struct fb_info * const info = file->private_data;
diff --git a/drivers/video/mb862xx/Makefile b/drivers/video/mb862xx/Makefile
new file mode 100644
index 000000000000..07664814bb1d
--- /dev/null
+++ b/drivers/video/mb862xx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the MB862xx framebuffer driver
+#
+
+obj-$(CONFIG_FB_MB862XX) := mb862xxfb.o
diff --git a/drivers/video/mb862xx/mb862xx_reg.h b/drivers/video/mb862xx/mb862xx_reg.h
new file mode 100644
index 000000000000..2ba65e118500
--- /dev/null
+++ b/drivers/video/mb862xx/mb862xx_reg.h
@@ -0,0 +1,138 @@
+/*
+ * Fujitsu MB862xx Graphics Controller Registers/Bits
+ */
+
+#ifndef _MB862XX_REG_H
+#define _MB862XX_REG_H
+
+#ifdef MB862XX_MMIO_BOTTOM
+#define MB862XX_MMIO_BASE 0x03fc0000
+#else
+#define MB862XX_MMIO_BASE 0x01fc0000
+#endif
+#define MB862XX_I2C_BASE 0x0000c000
+#define MB862XX_DISP_BASE 0x00010000
+#define MB862XX_CAP_BASE 0x00018000
+#define MB862XX_DRAW_BASE 0x00030000
+#define MB862XX_GEO_BASE 0x00038000
+#define MB862XX_PIO_BASE 0x00038000
+#define MB862XX_MMIO_SIZE 0x40000
+
+/* Host interface/pio registers */
+#define GC_IST 0x00000020
+#define GC_IMASK 0x00000024
+#define GC_SRST 0x0000002c
+#define GC_CCF 0x00000038
+#define GC_CID 0x000000f0
+#define GC_REVISION 0x00000084
+
+#define GC_CCF_CGE_100 0x00000000
+#define GC_CCF_CGE_133 0x00040000
+#define GC_CCF_CGE_166 0x00080000
+#define GC_CCF_COT_100 0x00000000
+#define GC_CCF_COT_133 0x00010000
+#define GC_CID_CNAME_MSK 0x0000ff00
+#define GC_CID_VERSION_MSK 0x000000ff
+
+/* define enabled interrupts hereby */
+#define GC_INT_EN 0x00000000
+
+/* Memory interface mode register */
+#define GC_MMR 0x0000fffc
+
+/* Display Controller registers */
+#define GC_DCM0 0x00000000
+#define GC_HTP 0x00000004
+#define GC_HDB_HDP 0x00000008
+#define GC_VSW_HSW_HSP 0x0000000c
+#define GC_VTR 0x00000010
+#define GC_VDP_VSP 0x00000014
+#define GC_WY_WX 0x00000018
+#define GC_WH_WW 0x0000001c
+#define GC_L0M 0x00000020
+#define GC_L0OA0 0x00000024
+#define GC_L0DA0 0x00000028
+#define GC_L0DY_L0DX 0x0000002c
+#define GC_DCM1 0x00000100
+#define GC_L0EM 0x00000110
+#define GC_L0WY_L0WX 0x00000114
+#define GC_L0WH_L0WW 0x00000118
+#define GC_DCM2 0x00000104
+#define GC_DCM3 0x00000108
+#define GC_CPM_CUTC 0x000000a0
+#define GC_CUOA0 0x000000a4
+#define GC_CUY0_CUX0 0x000000a8
+#define GC_CUOA1 0x000000ac
+#define GC_CUY1_CUX1 0x000000b0
+#define GC_L0PAL0 0x00000400
+
+#define GC_CPM_CEN0 0x00100000
+#define GC_CPM_CEN1 0x00200000
+
+#define GC_DCM01_ESY 0x00000004
+#define GC_DCM01_SC 0x00003f00
+#define GC_DCM01_RESV 0x00004000
+#define GC_DCM01_CKS 0x00008000
+#define GC_DCM01_L0E 0x00010000
+#define GC_DCM01_DEN 0x80000000
+#define GC_L0M_L0C_8 0x00000000
+#define GC_L0M_L0C_16 0x80000000
+#define GC_L0EM_L0EC_24 0x40000000
+#define GC_L0M_L0W_UNIT 64
+
+#define GC_DISP_REFCLK_400 400
+
+/* Carmine specific */
+#define MB86297_DRAW_BASE 0x00020000
+#define MB86297_DISP0_BASE 0x00100000
+#define MB86297_DISP1_BASE 0x00140000
+#define MB86297_WRBACK_BASE 0x00180000
+#define MB86297_CAP0_BASE 0x00200000
+#define MB86297_CAP1_BASE 0x00280000
+#define MB86297_DRAMCTRL_BASE 0x00300000
+#define MB86297_CTRL_BASE 0x00400000
+#define MB86297_I2C_BASE 0x00500000
+
+#define GC_CTRL_STATUS 0x00000000
+#define GC_CTRL_INT_MASK 0x00000004
+#define GC_CTRL_CLK_ENABLE 0x0000000c
+#define GC_CTRL_SOFT_RST 0x00000010
+
+#define GC_CTRL_CLK_EN_DRAM 0x00000001
+#define GC_CTRL_CLK_EN_2D3D 0x00000002
+#define GC_CTRL_CLK_EN_DISP0 0x00000020
+#define GC_CTRL_CLK_EN_DISP1 0x00000040
+
+#define GC_2D3D_REV 0x000004b4
+#define GC_RE_REVISION 0x24240200
+
+/* define enabled interrupts hereby */
+#define GC_CARMINE_INT_EN 0x00000004
+
+/* DRAM controller */
+#define GC_DCTL_MODE_ADD 0x00000000
+#define GC_DCTL_SETTIME1_EMODE 0x00000004
+#define GC_DCTL_REFRESH_SETTIME2 0x00000008
+#define GC_DCTL_RSV0_STATES 0x0000000C
+#define GC_DCTL_RSV2_RSV1 0x00000010
+#define GC_DCTL_DDRIF2_DDRIF1 0x00000014
+#define GC_DCTL_IOCONT1_IOCONT0 0x00000024
+
+#define GC_DCTL_STATES_MSK 0x0000000f
+#define GC_DCTL_INIT_WAIT_CNT 3000
+#define GC_DCTL_INIT_WAIT_INTERVAL 1
+
+/* DRAM ctrl values for Carmine PCI Eval. board */
+#define GC_EVB_DCTL_MODE_ADD 0x012105c3
+#define GC_EVB_DCTL_MODE_ADD_AFT_RST 0x002105c3
+#define GC_EVB_DCTL_SETTIME1_EMODE 0x47498000
+#define GC_EVB_DCTL_REFRESH_SETTIME2 0x00422a22
+#define GC_EVB_DCTL_RSV0_STATES 0x00200003
+#define GC_EVB_DCTL_RSV0_STATES_AFT_RST 0x00200002
+#define GC_EVB_DCTL_RSV2_RSV1 0x0000000f
+#define GC_EVB_DCTL_DDRIF2_DDRIF1 0x00556646
+#define GC_EVB_DCTL_IOCONT1_IOCONT0 0x05550555
+
+#define GC_DISP_REFCLK_533 533
+
+#endif
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
new file mode 100644
index 000000000000..38718d95fbb9
--- /dev/null
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -0,0 +1,1061 @@
+/*
+ * drivers/mb862xx/mb862xxfb.c
+ *
+ * Fujitsu Carmine/Coral-P(A)/Lime framebuffer driver
+ *
+ * (C) 2008 Anatolij Gustschin <agust@denx.de>
+ * DENX Software Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#if defined(CONFIG_PPC_OF)
+#include <linux/of_platform.h>
+#endif
+#include "mb862xxfb.h"
+#include "mb862xx_reg.h"
+
+#define NR_PALETTE 256
+#define MB862XX_MEM_SIZE 0x1000000
+#define CORALP_MEM_SIZE 0x4000000
+#define CARMINE_MEM_SIZE 0x8000000
+#define DRV_NAME "mb862xxfb"
+
+#if defined(CONFIG_LWMON5)
+static struct mb862xx_gc_mode lwmon5_gc_mode = {
+ /* Mode for Sharp LQ104V1DG61 TFT LCD Panel */
+ { "640x480", 60, 640, 480, 40000, 48, 16, 32, 11, 96, 2, 0, 0, 0 },
+ /* 16 bits/pixel, 32MB, 100MHz, SDRAM memory mode value */
+ 16, 0x2000000, GC_CCF_COT_100, 0x414fb7f2
+};
+#endif
+
+#if defined(CONFIG_SOCRATES)
+static struct mb862xx_gc_mode socrates_gc_mode = {
+ /* Mode for Prime View PM070WL4 TFT LCD Panel */
+ { "800x480", 45, 800, 480, 40000, 86, 42, 33, 10, 128, 2, 0, 0, 0 },
+ /* 16 bits/pixel, 16MB, 133MHz, SDRAM memory mode value */
+ 16, 0x1000000, GC_CCF_COT_133, 0x4157ba63
+};
+#endif
+
+/* Helpers */
+static inline int h_total(struct fb_var_screeninfo *var)
+{
+ return var->xres + var->left_margin +
+ var->right_margin + var->hsync_len;
+}
+
+static inline int v_total(struct fb_var_screeninfo *var)
+{
+ return var->yres + var->upper_margin +
+ var->lower_margin + var->vsync_len;
+}
+
+static inline int hsp(struct fb_var_screeninfo *var)
+{
+ return var->xres + var->right_margin - 1;
+}
+
+static inline int vsp(struct fb_var_screeninfo *var)
+{
+ return var->yres + var->lower_margin - 1;
+}
+
+static inline int d_pitch(struct fb_var_screeninfo *var)
+{
+ return var->xres * var->bits_per_pixel / 8;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+ struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int mb862xxfb_setcolreg(unsigned regno,
+ unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info)
+{
+ struct mb862xxfb_par *par = info->par;
+ unsigned int val;
+
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ if (regno < 16) {
+ val = chan_to_field(red, &info->var.red);
+ val |= chan_to_field(green, &info->var.green);
+ val |= chan_to_field(blue, &info->var.blue);
+ par->pseudo_palette[regno] = val;
+ }
+ break;
+ case FB_VISUAL_PSEUDOCOLOR:
+ if (regno < 256) {
+ val = (red >> 8) << 16;
+ val |= (green >> 8) << 8;
+ val |= blue >> 8;
+ outreg(disp, GC_L0PAL0 + (regno * 4), val);
+ }
+ break;
+ default:
+ return 1; /* unsupported type */
+ }
+ return 0;
+}
+
+static int mb862xxfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *fbi)
+{
+ unsigned long tmp;
+
+ if (fbi->dev)
+ dev_dbg(fbi->dev, "%s\n", __func__);
+
+ /* check if these values fit into the registers */
+ if (var->hsync_len > 255 || var->vsync_len > 255)
+ return -EINVAL;
+
+ if ((var->xres + var->right_margin) >= 4096)
+ return -EINVAL;
+
+ if ((var->yres + var->lower_margin) > 4096)
+ return -EINVAL;
+
+ if (h_total(var) > 4096 || v_total(var) > 4096)
+ return -EINVAL;
+
+ if (var->xres_virtual > 4096 || var->yres_virtual > 4096)
+ return -EINVAL;
+
+ if (var->bits_per_pixel <= 8)
+ var->bits_per_pixel = 8;
+ else if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
+
+ /*
+ * can cope with 8,16 or 24/32bpp if resulting
+ * pitch is divisible by 64 without remainder
+ */
+ if (d_pitch(&fbi->var) % GC_L0M_L0W_UNIT) {
+ int r;
+
+ var->bits_per_pixel = 0;
+ do {
+ var->bits_per_pixel += 8;
+ r = d_pitch(&fbi->var) % GC_L0M_L0W_UNIT;
+ } while (r && var->bits_per_pixel <= 32);
+
+ if (d_pitch(&fbi->var) % GC_L0M_L0W_UNIT)
+ return -EINVAL;
+ }
+
+ /* line length is going to be 128 bit aligned */
+ tmp = (var->xres * var->bits_per_pixel) / 8;
+ if ((tmp & 15) != 0)
+ return -EINVAL;
+
+ /* set r/g/b positions and validate bpp */
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.length = var->bits_per_pixel;
+ var->green.length = var->bits_per_pixel;
+ var->blue.length = var->bits_per_pixel;
+ var->red.offset = 0;
+ var->green.offset = 0;
+ var->blue.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 16:
+ var->red.length = 5;
+ var->green.length = 5;
+ var->blue.length = 5;
+ var->red.offset = 10;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 24:
+ case 32:
+ var->transp.length = 8;
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.offset = 24;
+ var->red.offset = 16;
+ var->green.offset = 8;
+ var->blue.offset = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * set display parameters
+ */
+static int mb862xxfb_set_par(struct fb_info *fbi)
+{
+ struct mb862xxfb_par *par = fbi->par;
+ unsigned long reg, sc;
+
+ dev_dbg(par->dev, "%s\n", __func__);
+
+ if (par->pre_init)
+ return 0;
+
+ /* disp off */
+ reg = inreg(disp, GC_DCM1);
+ reg &= ~GC_DCM01_DEN;
+ outreg(disp, GC_DCM1, reg);
+
+ /* set display reference clock div. */
+ sc = par->refclk / (1000000 / fbi->var.pixclock) - 1;
+ reg = inreg(disp, GC_DCM1);
+ reg &= ~(GC_DCM01_CKS | GC_DCM01_RESV | GC_DCM01_SC);
+ reg |= sc << 8;
+ outreg(disp, GC_DCM1, reg);
+ dev_dbg(par->dev, "SC 0x%lx\n", sc);
+
+ /* disp dimension, format */
+ reg = pack(d_pitch(&fbi->var) / GC_L0M_L0W_UNIT,
+ (fbi->var.yres - 1));
+ if (fbi->var.bits_per_pixel == 16)
+ reg |= GC_L0M_L0C_16;
+ outreg(disp, GC_L0M, reg);
+
+ if (fbi->var.bits_per_pixel == 32) {
+ reg = inreg(disp, GC_L0EM);
+ outreg(disp, GC_L0EM, reg | GC_L0EM_L0EC_24);
+ }
+ outreg(disp, GC_WY_WX, 0);
+ reg = pack(fbi->var.yres - 1, fbi->var.xres);
+ outreg(disp, GC_WH_WW, reg);
+ outreg(disp, GC_L0OA0, 0);
+ outreg(disp, GC_L0DA0, 0);
+ outreg(disp, GC_L0DY_L0DX, 0);
+ outreg(disp, GC_L0WY_L0WX, 0);
+ outreg(disp, GC_L0WH_L0WW, reg);
+
+ /* both HW-cursors off */
+ reg = inreg(disp, GC_CPM_CUTC);
+ reg &= ~(GC_CPM_CEN0 | GC_CPM_CEN1);
+ outreg(disp, GC_CPM_CUTC, reg);
+
+ /* timings */
+ reg = pack(fbi->var.xres - 1, fbi->var.xres - 1);
+ outreg(disp, GC_HDB_HDP, reg);
+ reg = pack((fbi->var.yres - 1), vsp(&fbi->var));
+ outreg(disp, GC_VDP_VSP, reg);
+ reg = ((fbi->var.vsync_len - 1) << 24) |
+ pack((fbi->var.hsync_len - 1), hsp(&fbi->var));
+ outreg(disp, GC_VSW_HSW_HSP, reg);
+ outreg(disp, GC_HTP, pack(h_total(&fbi->var) - 1, 0));
+ outreg(disp, GC_VTR, pack(v_total(&fbi->var) - 1, 0));
+
+ /* display on */
+ reg = inreg(disp, GC_DCM1);
+ reg |= GC_DCM01_DEN | GC_DCM01_L0E;
+ reg &= ~GC_DCM01_ESY;
+ outreg(disp, GC_DCM1, reg);
+ return 0;
+}
+
+static int mb862xxfb_pan(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct mb862xxfb_par *par = info->par;
+ unsigned long reg;
+
+ reg = pack(var->yoffset, var->xoffset);
+ outreg(disp, GC_L0WY_L0WX, reg);
+
+ reg = pack(var->yres_virtual, var->xres_virtual);
+ outreg(disp, GC_L0WH_L0WW, reg);
+ return 0;
+}
+
+static int mb862xxfb_blank(int mode, struct fb_info *fbi)
+{
+ struct mb862xxfb_par *par = fbi->par;
+ unsigned long reg;
+
+ dev_dbg(fbi->dev, "blank mode=%d\n", mode);
+
+ switch (mode) {
+ case FB_BLANK_POWERDOWN:
+ reg = inreg(disp, GC_DCM1);
+ reg &= ~GC_DCM01_DEN;
+ outreg(disp, GC_DCM1, reg);
+ break;
+ case FB_BLANK_UNBLANK:
+ reg = inreg(disp, GC_DCM1);
+ reg |= GC_DCM01_DEN;
+ outreg(disp, GC_DCM1, reg);
+ break;
+ case FB_BLANK_NORMAL:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+/* framebuffer ops */
+static struct fb_ops mb862xxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = mb862xxfb_check_var,
+ .fb_set_par = mb862xxfb_set_par,
+ .fb_setcolreg = mb862xxfb_setcolreg,
+ .fb_blank = mb862xxfb_blank,
+ .fb_pan_display = mb862xxfb_pan,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+/* initialize fb_info data */
+static int mb862xxfb_init_fbinfo(struct fb_info *fbi)
+{
+ struct mb862xxfb_par *par = fbi->par;
+ struct mb862xx_gc_mode *mode = par->gc_mode;
+ unsigned long reg;
+
+ fbi->fbops = &mb862xxfb_ops;
+ fbi->pseudo_palette = par->pseudo_palette;
+ fbi->screen_base = par->fb_base;
+ fbi->screen_size = par->mapped_vram;
+
+ strcpy(fbi->fix.id, DRV_NAME);
+ fbi->fix.smem_start = (unsigned long)par->fb_base_phys;
+ fbi->fix.smem_len = par->mapped_vram;
+ fbi->fix.mmio_start = (unsigned long)par->mmio_base_phys;
+ fbi->fix.mmio_len = par->mmio_len;
+ fbi->fix.accel = FB_ACCEL_NONE;
+ fbi->fix.type = FB_TYPE_PACKED_PIXELS;
+ fbi->fix.type_aux = 0;
+ fbi->fix.xpanstep = 1;
+ fbi->fix.ypanstep = 1;
+ fbi->fix.ywrapstep = 0;
+
+ reg = inreg(disp, GC_DCM1);
+ if (reg & GC_DCM01_DEN && reg & GC_DCM01_L0E) {
+ /* get the disp mode from active display cfg */
+ unsigned long sc = ((reg & GC_DCM01_SC) >> 8) + 1;
+ unsigned long hsp, vsp, ht, vt;
+
+ dev_dbg(par->dev, "using bootloader's disp. mode\n");
+ fbi->var.pixclock = (sc * 1000000) / par->refclk;
+ fbi->var.xres = (inreg(disp, GC_HDB_HDP) & 0x0fff) + 1;
+ reg = inreg(disp, GC_VDP_VSP);
+ fbi->var.yres = ((reg >> 16) & 0x0fff) + 1;
+ vsp = (reg & 0x0fff) + 1;
+ fbi->var.xres_virtual = fbi->var.xres;
+ fbi->var.yres_virtual = fbi->var.yres;
+ reg = inreg(disp, GC_L0EM);
+ if (reg & GC_L0EM_L0EC_24) {
+ fbi->var.bits_per_pixel = 32;
+ } else {
+ reg = inreg(disp, GC_L0M);
+ if (reg & GC_L0M_L0C_16)
+ fbi->var.bits_per_pixel = 16;
+ else
+ fbi->var.bits_per_pixel = 8;
+ }
+ reg = inreg(disp, GC_VSW_HSW_HSP);
+ fbi->var.hsync_len = ((reg & 0xff0000) >> 16) + 1;
+ fbi->var.vsync_len = ((reg & 0x3f000000) >> 24) + 1;
+ hsp = (reg & 0xffff) + 1;
+ ht = ((inreg(disp, GC_HTP) & 0xfff0000) >> 16) + 1;
+ fbi->var.right_margin = hsp - fbi->var.xres;
+ fbi->var.left_margin = ht - hsp - fbi->var.hsync_len;
+ vt = ((inreg(disp, GC_VTR) & 0xfff0000) >> 16) + 1;
+ fbi->var.lower_margin = vsp - fbi->var.yres;
+ fbi->var.upper_margin = vt - vsp - fbi->var.vsync_len;
+ } else if (mode) {
+ dev_dbg(par->dev, "using supplied mode\n");
+ fb_videomode_to_var(&fbi->var, (struct fb_videomode *)mode);
+ fbi->var.bits_per_pixel = mode->def_bpp ? mode->def_bpp : 8;
+ } else {
+ int ret;
+
+ ret = fb_find_mode(&fbi->var, fbi, "640x480-16@60",
+ NULL, 0, NULL, 16);
+ if (ret == 0 || ret == 4) {
+ dev_err(par->dev,
+ "failed to get initial mode\n");
+ return -EINVAL;
+ }
+ }
+
+ fbi->var.xoffset = 0;
+ fbi->var.yoffset = 0;
+ fbi->var.grayscale = 0;
+ fbi->var.nonstd = 0;
+ fbi->var.height = -1;
+ fbi->var.width = -1;
+ fbi->var.accel_flags = 0;
+ fbi->var.vmode = FB_VMODE_NONINTERLACED;
+ fbi->var.activate = FB_ACTIVATE_NOW;
+ fbi->flags = FBINFO_DEFAULT |
+#ifdef __BIG_ENDIAN
+ FBINFO_FOREIGN_ENDIAN |
+#endif
+ FBINFO_HWACCEL_XPAN |
+ FBINFO_HWACCEL_YPAN;
+
+ /* check and possibly fix bpp */
+ if ((fbi->fbops->fb_check_var)(&fbi->var, fbi))
+ dev_err(par->dev, "check_var() failed on initial setup?\n");
+
+ fbi->fix.visual = fbi->var.bits_per_pixel == 8 ?
+ FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+ fbi->fix.line_length = (fbi->var.xres_virtual *
+ fbi->var.bits_per_pixel) / 8;
+ return 0;
+}
+
+/*
+ * show some display controller and cursor registers
+ */
+static ssize_t mb862xxfb_show_dispregs(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fb_info *fbi = dev_get_drvdata(dev);
+ struct mb862xxfb_par *par = fbi->par;
+ char *ptr = buf;
+ unsigned int reg;
+
+ for (reg = GC_DCM0; reg <= GC_L0DY_L0DX; reg += 4)
+ ptr += sprintf(ptr, "%08x = %08x\n",
+ reg, inreg(disp, reg));
+
+ for (reg = GC_CPM_CUTC; reg <= GC_CUY1_CUX1; reg += 4)
+ ptr += sprintf(ptr, "%08x = %08x\n",
+ reg, inreg(disp, reg));
+
+ for (reg = GC_DCM1; reg <= GC_L0WH_L0WW; reg += 4)
+ ptr += sprintf(ptr, "%08x = %08x\n",
+ reg, inreg(disp, reg));
+
+ return ptr - buf;
+}
+
+static DEVICE_ATTR(dispregs, 0444, mb862xxfb_show_dispregs, NULL);
+
+irqreturn_t mb862xx_intr(int irq, void *dev_id)
+{
+ struct mb862xxfb_par *par = (struct mb862xxfb_par *) dev_id;
+ unsigned long reg_ist, mask;
+
+ if (!par)
+ return IRQ_NONE;
+
+ if (par->type == BT_CARMINE) {
+ /* Get Interrupt Status */
+ reg_ist = inreg(ctrl, GC_CTRL_STATUS);
+ mask = inreg(ctrl, GC_CTRL_INT_MASK);
+ if (reg_ist == 0)
+ return IRQ_HANDLED;
+
+ reg_ist &= mask;
+ if (reg_ist == 0)
+ return IRQ_HANDLED;
+
+ /* Clear interrupt status */
+ outreg(ctrl, 0x0, reg_ist);
+ } else {
+ /* Get status */
+ reg_ist = inreg(host, GC_IST);
+ mask = inreg(host, GC_IMASK);
+
+ reg_ist &= mask;
+ if (reg_ist == 0)
+ return IRQ_HANDLED;
+
+ /* Clear status */
+ outreg(host, GC_IST, ~reg_ist);
+ }
+ return IRQ_HANDLED;
+}
+
+#if defined(CONFIG_FB_MB862XX_LIME)
+/*
+ * GDC (Lime, Coral(B/Q), Mint, ...) on host bus
+ */
+static int mb862xx_gdc_init(struct mb862xxfb_par *par)
+{
+ unsigned long ccf, mmr;
+ unsigned long ver, rev;
+
+ if (!par)
+ return -ENODEV;
+
+#if defined(CONFIG_FB_PRE_INIT_FB)
+ par->pre_init = 1;
+#endif
+ par->host = par->mmio_base;
+ par->i2c = par->mmio_base + MB862XX_I2C_BASE;
+ par->disp = par->mmio_base + MB862XX_DISP_BASE;
+ par->cap = par->mmio_base + MB862XX_CAP_BASE;
+ par->draw = par->mmio_base + MB862XX_DRAW_BASE;
+ par->geo = par->mmio_base + MB862XX_GEO_BASE;
+ par->pio = par->mmio_base + MB862XX_PIO_BASE;
+
+ par->refclk = GC_DISP_REFCLK_400;
+
+ ver = inreg(host, GC_CID);
+ rev = inreg(pio, GC_REVISION);
+ if ((ver == 0x303) && (rev & 0xffffff00) == 0x20050100) {
+ dev_info(par->dev, "Fujitsu Lime v1.%d found\n",
+ (int)rev & 0xff);
+ par->type = BT_LIME;
+ ccf = par->gc_mode ? par->gc_mode->ccf : GC_CCF_COT_100;
+ mmr = par->gc_mode ? par->gc_mode->mmr : 0x414fb7f2;
+ } else {
+ dev_info(par->dev, "? GDC, CID/Rev.: 0x%lx/0x%lx \n", ver, rev);
+ return -ENODEV;
+ }
+
+ if (!par->pre_init) {
+ outreg(host, GC_CCF, ccf);
+ udelay(200);
+ outreg(host, GC_MMR, mmr);
+ udelay(10);
+ }
+
+ /* interrupt status */
+ outreg(host, GC_IST, 0);
+ outreg(host, GC_IMASK, GC_INT_EN);
+ return 0;
+}
+
+static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev,
+ const struct of_device_id *id)
+{
+ struct device_node *np = ofdev->node;
+ struct device *dev = &ofdev->dev;
+ struct mb862xxfb_par *par;
+ struct fb_info *info;
+ struct resource res;
+ resource_size_t res_size;
+ unsigned long ret = -ENODEV;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ dev_err(dev, "Invalid address\n");
+ return -ENXIO;
+ }
+
+ info = framebuffer_alloc(sizeof(struct mb862xxfb_par), dev);
+ if (info == NULL) {
+ dev_err(dev, "cannot allocate framebuffer\n");
+ return -ENOMEM;
+ }
+
+ par = info->par;
+ par->info = info;
+ par->dev = dev;
+
+ par->irq = irq_of_parse_and_map(np, 0);
+ if (par->irq == NO_IRQ) {
+ dev_err(dev, "failed to map irq\n");
+ ret = -ENODEV;
+ goto fbrel;
+ }
+
+ res_size = 1 + res.end - res.start;
+ par->res = request_mem_region(res.start, res_size, DRV_NAME);
+ if (par->res == NULL) {
+ dev_err(dev, "Cannot claim framebuffer/mmio\n");
+ ret = -ENXIO;
+ goto irqdisp;
+ }
+
+#if defined(CONFIG_LWMON5)
+ par->gc_mode = &lwmon5_gc_mode;
+#endif
+
+#if defined(CONFIG_SOCRATES)
+ par->gc_mode = &socrates_gc_mode;
+#endif
+
+ par->fb_base_phys = res.start;
+ par->mmio_base_phys = res.start + MB862XX_MMIO_BASE;
+ par->mmio_len = MB862XX_MMIO_SIZE;
+ if (par->gc_mode)
+ par->mapped_vram = par->gc_mode->max_vram;
+ else
+ par->mapped_vram = MB862XX_MEM_SIZE;
+
+ par->fb_base = ioremap(par->fb_base_phys, par->mapped_vram);
+ if (par->fb_base == NULL) {
+ dev_err(dev, "Cannot map framebuffer\n");
+ goto rel_reg;
+ }
+
+ par->mmio_base = ioremap(par->mmio_base_phys, par->mmio_len);
+ if (par->mmio_base == NULL) {
+ dev_err(dev, "Cannot map registers\n");
+ goto fb_unmap;
+ }
+
+ dev_dbg(dev, "fb phys 0x%llx 0x%lx\n",
+ (u64)par->fb_base_phys, (ulong)par->mapped_vram);
+ dev_dbg(dev, "mmio phys 0x%llx 0x%lx, (irq = %d)\n",
+ (u64)par->mmio_base_phys, (ulong)par->mmio_len, par->irq);
+
+ if (mb862xx_gdc_init(par))
+ goto io_unmap;
+
+ if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED,
+ DRV_NAME, (void *)par)) {
+ dev_err(dev, "Cannot request irq\n");
+ goto io_unmap;
+ }
+
+ mb862xxfb_init_fbinfo(info);
+
+ if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0) < 0) {
+ dev_err(dev, "Could not allocate cmap for fb_info.\n");
+ goto free_irq;
+ }
+
+ if ((info->fbops->fb_set_par)(info))
+ dev_err(dev, "set_var() failed on initial setup?\n");
+
+ if (register_framebuffer(info)) {
+ dev_err(dev, "failed to register framebuffer\n");
+ goto rel_cmap;
+ }
+
+ dev_set_drvdata(dev, info);
+
+ if (device_create_file(dev, &dev_attr_dispregs))
+ dev_err(dev, "Can't create sysfs regdump file\n");
+ return 0;
+
+rel_cmap:
+ fb_dealloc_cmap(&info->cmap);
+free_irq:
+ outreg(host, GC_IMASK, 0);
+ free_irq(par->irq, (void *)par);
+io_unmap:
+ iounmap(par->mmio_base);
+fb_unmap:
+ iounmap(par->fb_base);
+rel_reg:
+ release_mem_region(res.start, res_size);
+irqdisp:
+ irq_dispose_mapping(par->irq);
+fbrel:
+ dev_set_drvdata(dev, NULL);
+ framebuffer_release(info);
+ return ret;
+}
+
+static int __devexit of_platform_mb862xx_remove(struct of_device *ofdev)
+{
+ struct fb_info *fbi = dev_get_drvdata(&ofdev->dev);
+ struct mb862xxfb_par *par = fbi->par;
+ resource_size_t res_size = 1 + par->res->end - par->res->start;
+ unsigned long reg;
+
+ dev_dbg(fbi->dev, "%s release\n", fbi->fix.id);
+
+ /* display off */
+ reg = inreg(disp, GC_DCM1);
+ reg &= ~(GC_DCM01_DEN | GC_DCM01_L0E);
+ outreg(disp, GC_DCM1, reg);
+
+ /* disable interrupts */
+ outreg(host, GC_IMASK, 0);
+
+ free_irq(par->irq, (void *)par);
+ irq_dispose_mapping(par->irq);
+
+ device_remove_file(&ofdev->dev, &dev_attr_dispregs);
+
+ unregister_framebuffer(fbi);
+ fb_dealloc_cmap(&fbi->cmap);
+
+ iounmap(par->mmio_base);
+ iounmap(par->fb_base);
+
+ dev_set_drvdata(&ofdev->dev, NULL);
+ release_mem_region(par->res->start, res_size);
+ framebuffer_release(fbi);
+ return 0;
+}
+
+/*
+ * common types
+ */
+static struct of_device_id __devinitdata of_platform_mb862xx_tbl[] = {
+ { .compatible = "fujitsu,MB86276", },
+ { .compatible = "fujitsu,lime", },
+ { .compatible = "fujitsu,MB86277", },
+ { .compatible = "fujitsu,mint", },
+ { .compatible = "fujitsu,MB86293", },
+ { .compatible = "fujitsu,MB86294", },
+ { .compatible = "fujitsu,coral", },
+ { /* end */ }
+};
+
+static struct of_platform_driver of_platform_mb862xxfb_driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ .match_table = of_platform_mb862xx_tbl,
+ .probe = of_platform_mb862xx_probe,
+ .remove = __devexit_p(of_platform_mb862xx_remove),
+};
+#endif
+
+#if defined(CONFIG_FB_MB862XX_PCI_GDC)
+static int coralp_init(struct mb862xxfb_par *par)
+{
+ int cn, ver;
+
+ par->host = par->mmio_base;
+ par->i2c = par->mmio_base + MB862XX_I2C_BASE;
+ par->disp = par->mmio_base + MB862XX_DISP_BASE;
+ par->cap = par->mmio_base + MB862XX_CAP_BASE;
+ par->draw = par->mmio_base + MB862XX_DRAW_BASE;
+ par->geo = par->mmio_base + MB862XX_GEO_BASE;
+ par->pio = par->mmio_base + MB862XX_PIO_BASE;
+
+ par->refclk = GC_DISP_REFCLK_400;
+
+ ver = inreg(host, GC_CID);
+ cn = (ver & GC_CID_CNAME_MSK) >> 8;
+ ver = ver & GC_CID_VERSION_MSK;
+ if (cn == 3) {
+ dev_info(par->dev, "Fujitsu Coral-%s GDC Rev.%d found\n",\
+ (ver == 6) ? "P" : (ver == 8) ? "PA" : "?",
+ par->pdev->revision);
+ outreg(host, GC_CCF, GC_CCF_CGE_166 | GC_CCF_COT_133);
+ udelay(200);
+ outreg(host, GC_MMR, GC_MMR_CORALP_EVB_VAL);
+ udelay(10);
+ /* Clear interrupt status */
+ outreg(host, GC_IST, 0);
+ } else {
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int init_dram_ctrl(struct mb862xxfb_par *par)
+{
+ unsigned long i = 0;
+
+ /*
+ * Set io mode first! Spec. says IC may be destroyed
+ * if not set to SSTL2/LVCMOS before init.
+ */
+ outreg(dram_ctrl, GC_DCTL_IOCONT1_IOCONT0, GC_EVB_DCTL_IOCONT1_IOCONT0);
+
+ /* DRAM init */
+ outreg(dram_ctrl, GC_DCTL_MODE_ADD, GC_EVB_DCTL_MODE_ADD);
+ outreg(dram_ctrl, GC_DCTL_SETTIME1_EMODE, GC_EVB_DCTL_SETTIME1_EMODE);
+ outreg(dram_ctrl, GC_DCTL_REFRESH_SETTIME2,
+ GC_EVB_DCTL_REFRESH_SETTIME2);
+ outreg(dram_ctrl, GC_DCTL_RSV2_RSV1, GC_EVB_DCTL_RSV2_RSV1);
+ outreg(dram_ctrl, GC_DCTL_DDRIF2_DDRIF1, GC_EVB_DCTL_DDRIF2_DDRIF1);
+ outreg(dram_ctrl, GC_DCTL_RSV0_STATES, GC_EVB_DCTL_RSV0_STATES);
+
+ /* DLL reset done? */
+ while ((inreg(dram_ctrl, GC_DCTL_RSV0_STATES) & GC_DCTL_STATES_MSK)) {
+ udelay(GC_DCTL_INIT_WAIT_INTERVAL);
+ if (i++ > GC_DCTL_INIT_WAIT_CNT) {
+ dev_err(par->dev, "VRAM init failed.\n");
+ return -EINVAL;
+ }
+ }
+ outreg(dram_ctrl, GC_DCTL_MODE_ADD, GC_EVB_DCTL_MODE_ADD_AFT_RST);
+ outreg(dram_ctrl, GC_DCTL_RSV0_STATES, GC_EVB_DCTL_RSV0_STATES_AFT_RST);
+ return 0;
+}
+
+static int carmine_init(struct mb862xxfb_par *par)
+{
+ unsigned long reg;
+
+ par->ctrl = par->mmio_base + MB86297_CTRL_BASE;
+ par->i2c = par->mmio_base + MB86297_I2C_BASE;
+ par->disp = par->mmio_base + MB86297_DISP0_BASE;
+ par->disp1 = par->mmio_base + MB86297_DISP1_BASE;
+ par->cap = par->mmio_base + MB86297_CAP0_BASE;
+ par->cap1 = par->mmio_base + MB86297_CAP1_BASE;
+ par->draw = par->mmio_base + MB86297_DRAW_BASE;
+ par->dram_ctrl = par->mmio_base + MB86297_DRAMCTRL_BASE;
+ par->wrback = par->mmio_base + MB86297_WRBACK_BASE;
+
+ par->refclk = GC_DISP_REFCLK_533;
+
+ /* warm up */
+ reg = GC_CTRL_CLK_EN_DRAM | GC_CTRL_CLK_EN_2D3D | GC_CTRL_CLK_EN_DISP0;
+ outreg(ctrl, GC_CTRL_CLK_ENABLE, reg);
+
+ /* check for engine module revision */
+ if (inreg(draw, GC_2D3D_REV) == GC_RE_REVISION)
+ dev_info(par->dev, "Fujitsu Carmine GDC Rev.%d found\n",
+ par->pdev->revision);
+ else
+ goto err_init;
+
+ reg &= ~GC_CTRL_CLK_EN_2D3D;
+ outreg(ctrl, GC_CTRL_CLK_ENABLE, reg);
+
+ /* set up vram */
+ if (init_dram_ctrl(par) < 0)
+ goto err_init;
+
+ outreg(ctrl, GC_CTRL_INT_MASK, 0);
+ return 0;
+
+err_init:
+ outreg(ctrl, GC_CTRL_CLK_ENABLE, 0);
+ return -EINVAL;
+}
+
+static inline int mb862xx_pci_gdc_init(struct mb862xxfb_par *par)
+{
+ switch (par->type) {
+ case BT_CORALP:
+ return coralp_init(par);
+ case BT_CARMINE:
+ return carmine_init(par);
+ default:
+ return -ENODEV;
+ }
+}
+
+#define CHIP_ID(id) \
+ { PCI_DEVICE(PCI_VENDOR_ID_FUJITSU_LIMITED, id) }
+
+static struct pci_device_id mb862xx_pci_tbl[] __devinitdata = {
+ /* MB86295/MB86296 */
+ CHIP_ID(PCI_DEVICE_ID_FUJITSU_CORALP),
+ CHIP_ID(PCI_DEVICE_ID_FUJITSU_CORALPA),
+ /* MB86297 */
+ CHIP_ID(PCI_DEVICE_ID_FUJITSU_CARMINE),
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, mb862xx_pci_tbl);
+
+static int __devinit mb862xx_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct mb862xxfb_par *par;
+ struct fb_info *info;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(dev, "Cannot enable PCI device\n");
+ goto out;
+ }
+
+ info = framebuffer_alloc(sizeof(struct mb862xxfb_par), dev);
+ if (!info) {
+ dev_err(dev, "framebuffer alloc failed\n");
+ ret = -ENOMEM;
+ goto dis_dev;
+ }
+
+ par = info->par;
+ par->info = info;
+ par->dev = dev;
+ par->pdev = pdev;
+ par->irq = pdev->irq;
+
+ ret = pci_request_regions(pdev, DRV_NAME);
+ if (ret < 0) {
+ dev_err(dev, "Cannot reserve region(s) for PCI device\n");
+ goto rel_fb;
+ }
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_FUJITSU_CORALP:
+ case PCI_DEVICE_ID_FUJITSU_CORALPA:
+ par->fb_base_phys = pci_resource_start(par->pdev, 0);
+ par->mapped_vram = CORALP_MEM_SIZE;
+ par->mmio_base_phys = par->fb_base_phys + MB862XX_MMIO_BASE;
+ par->mmio_len = MB862XX_MMIO_SIZE;
+ par->type = BT_CORALP;
+ break;
+ case PCI_DEVICE_ID_FUJITSU_CARMINE:
+ par->fb_base_phys = pci_resource_start(par->pdev, 2);
+ par->mmio_base_phys = pci_resource_start(par->pdev, 3);
+ par->mmio_len = pci_resource_len(par->pdev, 3);
+ par->mapped_vram = CARMINE_MEM_SIZE;
+ par->type = BT_CARMINE;
+ break;
+ default:
+ /* should never occur */
+ goto rel_reg;
+ }
+
+ par->fb_base = ioremap(par->fb_base_phys, par->mapped_vram);
+ if (par->fb_base == NULL) {
+ dev_err(dev, "Cannot map framebuffer\n");
+ goto rel_reg;
+ }
+
+ par->mmio_base = ioremap(par->mmio_base_phys, par->mmio_len);
+ if (par->mmio_base == NULL) {
+ dev_err(dev, "Cannot map registers\n");
+ ret = -EIO;
+ goto fb_unmap;
+ }
+
+ dev_dbg(dev, "fb phys 0x%llx 0x%lx\n",
+ (u64)par->fb_base_phys, (ulong)par->mapped_vram);
+ dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n",
+ (u64)par->mmio_base_phys, (ulong)par->mmio_len);
+
+ if (mb862xx_pci_gdc_init(par))
+ goto io_unmap;
+
+ if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED | IRQF_SHARED,
+ DRV_NAME, (void *)par)) {
+ dev_err(dev, "Cannot request irq\n");
+ goto io_unmap;
+ }
+
+ mb862xxfb_init_fbinfo(info);
+
+ if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0) < 0) {
+ dev_err(dev, "Could not allocate cmap for fb_info.\n");
+ ret = -ENOMEM;
+ goto free_irq;
+ }
+
+ if ((info->fbops->fb_set_par)(info))
+ dev_err(dev, "set_var() failed on initial setup?\n");
+
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(dev, "failed to register framebuffer\n");
+ goto rel_cmap;
+ }
+
+ pci_set_drvdata(pdev, info);
+
+ if (device_create_file(dev, &dev_attr_dispregs))
+ dev_err(dev, "Can't create sysfs regdump file\n");
+
+ if (par->type == BT_CARMINE)
+ outreg(ctrl, GC_CTRL_INT_MASK, GC_CARMINE_INT_EN);
+ else
+ outreg(host, GC_IMASK, GC_INT_EN);
+
+ return 0;
+
+rel_cmap:
+ fb_dealloc_cmap(&info->cmap);
+free_irq:
+ free_irq(par->irq, (void *)par);
+io_unmap:
+ iounmap(par->mmio_base);
+fb_unmap:
+ iounmap(par->fb_base);
+rel_reg:
+ pci_release_regions(pdev);
+rel_fb:
+ framebuffer_release(info);
+dis_dev:
+ pci_disable_device(pdev);
+out:
+ return ret;
+}
+
+static void __devexit mb862xx_pci_remove(struct pci_dev *pdev)
+{
+ struct fb_info *fbi = pci_get_drvdata(pdev);
+ struct mb862xxfb_par *par = fbi->par;
+ unsigned long reg;
+
+ dev_dbg(fbi->dev, "%s release\n", fbi->fix.id);
+
+ /* display off */
+ reg = inreg(disp, GC_DCM1);
+ reg &= ~(GC_DCM01_DEN | GC_DCM01_L0E);
+ outreg(disp, GC_DCM1, reg);
+
+ if (par->type == BT_CARMINE) {
+ outreg(ctrl, GC_CTRL_INT_MASK, 0);
+ outreg(ctrl, GC_CTRL_CLK_ENABLE, 0);
+ } else {
+ outreg(host, GC_IMASK, 0);
+ }
+
+ device_remove_file(&pdev->dev, &dev_attr_dispregs);
+
+ pci_set_drvdata(pdev, NULL);
+ unregister_framebuffer(fbi);
+ fb_dealloc_cmap(&fbi->cmap);
+
+ free_irq(par->irq, (void *)par);
+ iounmap(par->mmio_base);
+ iounmap(par->fb_base);
+
+ pci_release_regions(pdev);
+ framebuffer_release(fbi);
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver mb862xxfb_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mb862xx_pci_tbl,
+ .probe = mb862xx_pci_probe,
+ .remove = __devexit_p(mb862xx_pci_remove),
+};
+#endif
+
+static int __devinit mb862xxfb_init(void)
+{
+ int ret = -ENODEV;
+
+#if defined(CONFIG_FB_MB862XX_LIME)
+ ret = of_register_platform_driver(&of_platform_mb862xxfb_driver);
+#endif
+#if defined(CONFIG_FB_MB862XX_PCI_GDC)
+ ret = pci_register_driver(&mb862xxfb_pci_driver);
+#endif
+ return ret;
+}
+
+static void __exit mb862xxfb_exit(void)
+{
+#if defined(CONFIG_FB_MB862XX_LIME)
+ of_unregister_platform_driver(&of_platform_mb862xxfb_driver);
+#endif
+#if defined(CONFIG_FB_MB862XX_PCI_GDC)
+ pci_unregister_driver(&mb862xxfb_pci_driver);
+#endif
+}
+
+module_init(mb862xxfb_init);
+module_exit(mb862xxfb_exit);
+
+MODULE_DESCRIPTION("Fujitsu MB862xx Framebuffer driver");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/mb862xx/mb862xxfb.h b/drivers/video/mb862xx/mb862xxfb.h
new file mode 100644
index 000000000000..c4c8f4dd2217
--- /dev/null
+++ b/drivers/video/mb862xx/mb862xxfb.h
@@ -0,0 +1,83 @@
+#ifndef __MB862XX_H__
+#define __MB862XX_H__
+
+#define PCI_VENDOR_ID_FUJITSU_LIMITED 0x10cf
+#define PCI_DEVICE_ID_FUJITSU_CORALP 0x2019
+#define PCI_DEVICE_ID_FUJITSU_CORALPA 0x201e
+#define PCI_DEVICE_ID_FUJITSU_CARMINE 0x202b
+
+#define GC_MMR_CORALP_EVB_VAL 0x11d7fa13
+
+enum gdctype {
+ BT_NONE,
+ BT_LIME,
+ BT_MINT,
+ BT_CORAL,
+ BT_CORALP,
+ BT_CARMINE,
+};
+
+struct mb862xx_gc_mode {
+ struct fb_videomode def_mode; /* mode of connected display */
+ unsigned int def_bpp; /* default depth */
+ unsigned long max_vram; /* connected SDRAM size */
+ unsigned long ccf; /* gdc clk */
+ unsigned long mmr; /* memory mode for SDRAM */
+};
+
+/* private data */
+struct mb862xxfb_par {
+ struct fb_info *info; /* fb info head */
+ struct device *dev;
+ struct pci_dev *pdev;
+ struct resource *res; /* framebuffer/mmio resource */
+
+ resource_size_t fb_base_phys; /* fb base, 36-bit PPC440EPx */
+ resource_size_t mmio_base_phys; /* io base addr */
+ void __iomem *fb_base; /* remapped framebuffer */
+ void __iomem *mmio_base; /* remapped registers */
+ size_t mapped_vram; /* length of remapped vram */
+ size_t mmio_len; /* length of register region */
+
+ void __iomem *host; /* relocatable reg. bases */
+ void __iomem *i2c;
+ void __iomem *disp;
+ void __iomem *disp1;
+ void __iomem *cap;
+ void __iomem *cap1;
+ void __iomem *draw;
+ void __iomem *geo;
+ void __iomem *pio;
+ void __iomem *ctrl;
+ void __iomem *dram_ctrl;
+ void __iomem *wrback;
+
+ unsigned int irq;
+ unsigned int type; /* GDC type */
+ unsigned int refclk; /* disp. reference clock */
+ struct mb862xx_gc_mode *gc_mode; /* GDC mode init data */
+ int pre_init; /* don't init display if 1 */
+
+ u32 pseudo_palette[16];
+};
+
+#if defined(CONFIG_FB_MB862XX_LIME) && defined(CONFIG_FB_MB862XX_PCI_GDC)
+#error "Select Lime GDC or CoralP/Carmine support, but not both together"
+#endif
+#if defined(CONFIG_FB_MB862XX_LIME)
+#define gdc_read __raw_readl
+#define gdc_write __raw_writel
+#else
+#define gdc_read readl
+#define gdc_write writel
+#endif
+
+#define inreg(type, off) \
+ gdc_read((par->type + (off)))
+
+#define outreg(type, off, val) \
+ gdc_write((val), (par->type + (off)))
+
+#define pack(a, b) (((a) << 16) | (b))
+
+#endif
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index c4493091c655..a14d5b6e4c7c 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -52,5 +52,12 @@ config W1_MASTER_GPIO
This support is also available as a module. If so, the module
will be called w1-gpio.ko.
+config HDQ_MASTER_OMAP
+ tristate "OMAP HDQ driver"
+ depends on ARCH_OMAP2430 || ARCH_OMAP34XX
+ help
+ Say Y here if you want support for the 1-wire or HDQ Interface
+ on an OMAP processor.
+
endmenu
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 1420b5bbdda8..bc4714a75f3a 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o
obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o
obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o
obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o
+obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
new file mode 100644
index 000000000000..1295625c4825
--- /dev/null
+++ b/drivers/w1/masters/omap_hdq.c
@@ -0,0 +1,725 @@
+/*
+ * drivers/w1/masters/omap_hdq.c
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+#define MOD_NAME "OMAP_HDQ:"
+
+#define OMAP_HDQ_REVISION 0x00
+#define OMAP_HDQ_TX_DATA 0x04
+#define OMAP_HDQ_RX_DATA 0x08
+#define OMAP_HDQ_CTRL_STATUS 0x0c
+#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK (1<<6)
+#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE (1<<5)
+#define OMAP_HDQ_CTRL_STATUS_GO (1<<4)
+#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION (1<<2)
+#define OMAP_HDQ_CTRL_STATUS_DIR (1<<1)
+#define OMAP_HDQ_CTRL_STATUS_MODE (1<<0)
+#define OMAP_HDQ_INT_STATUS 0x10
+#define OMAP_HDQ_INT_STATUS_TXCOMPLETE (1<<2)
+#define OMAP_HDQ_INT_STATUS_RXCOMPLETE (1<<1)
+#define OMAP_HDQ_INT_STATUS_TIMEOUT (1<<0)
+#define OMAP_HDQ_SYSCONFIG 0x14
+#define OMAP_HDQ_SYSCONFIG_SOFTRESET (1<<1)
+#define OMAP_HDQ_SYSCONFIG_AUTOIDLE (1<<0)
+#define OMAP_HDQ_SYSSTATUS 0x18
+#define OMAP_HDQ_SYSSTATUS_RESETDONE (1<<0)
+
+#define OMAP_HDQ_FLAG_CLEAR 0
+#define OMAP_HDQ_FLAG_SET 1
+#define OMAP_HDQ_TIMEOUT (HZ/5)
+
+#define OMAP_HDQ_MAX_USER 4
+
+static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
+static int w1_id;
+
+struct hdq_data {
+ struct device *dev;
+ void __iomem *hdq_base;
+ /* lock status update */
+ struct mutex hdq_mutex;
+ int hdq_usecount;
+ struct clk *hdq_ick;
+ struct clk *hdq_fck;
+ u8 hdq_irqstatus;
+ /* device lock */
+ spinlock_t hdq_spinlock;
+ /*
+ * Used to control the call to omap_hdq_get and omap_hdq_put.
+ * HDQ Protocol: Write the CMD|REG_address first, followed by
+ * the data wrire or read.
+ */
+ int init_trans;
+};
+
+static int __init omap_hdq_probe(struct platform_device *pdev);
+static int omap_hdq_remove(struct platform_device *pdev);
+
+static struct platform_driver omap_hdq_driver = {
+ .probe = omap_hdq_probe,
+ .remove = omap_hdq_remove,
+ .driver = {
+ .name = "omap_hdq",
+ },
+};
+
+static u8 omap_w1_read_byte(void *_hdq);
+static void omap_w1_write_byte(void *_hdq, u8 byte);
+static u8 omap_w1_reset_bus(void *_hdq);
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+ w1_slave_found_callback slave_found);
+
+
+static struct w1_bus_master omap_w1_master = {
+ .read_byte = omap_w1_read_byte,
+ .write_byte = omap_w1_write_byte,
+ .reset_bus = omap_w1_reset_bus,
+ .search = omap_w1_search_bus,
+};
+
+/* HDQ register I/O routines */
+static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
+{
+ return __raw_readb(hdq_data->hdq_base + offset);
+}
+
+static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
+{
+ __raw_writeb(val, hdq_data->hdq_base + offset);
+}
+
+static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
+ u8 val, u8 mask)
+{
+ u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+ | (val & mask);
+ __raw_writeb(new_val, hdq_data->hdq_base + offset);
+
+ return new_val;
+}
+
+/*
+ * Wait for one or more bits in flag change.
+ * HDQ_FLAG_SET: wait until any bit in the flag is set.
+ * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared.
+ * return 0 on success and -ETIMEDOUT in the case of timeout.
+ */
+static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset,
+ u8 flag, u8 flag_set, u8 *status)
+{
+ int ret = 0;
+ unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+ if (flag_set == OMAP_HDQ_FLAG_CLEAR) {
+ /* wait for the flag clear */
+ while (((*status = hdq_reg_in(hdq_data, offset)) & flag)
+ && time_before(jiffies, timeout)) {
+ schedule_timeout_uninterruptible(1);
+ }
+ if (*status & flag)
+ ret = -ETIMEDOUT;
+ } else if (flag_set == OMAP_HDQ_FLAG_SET) {
+ /* wait for the flag set */
+ while (!((*status = hdq_reg_in(hdq_data, offset)) & flag)
+ && time_before(jiffies, timeout)) {
+ schedule_timeout_uninterruptible(1);
+ }
+ if (!(*status & flag))
+ ret = -ETIMEDOUT;
+ } else
+ return -EINVAL;
+
+ return ret;
+}
+
+/* write out a byte and fill *status with HDQ_INT_STATUS */
+static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
+{
+ int ret;
+ u8 tmp_status;
+ unsigned long irqflags;
+
+ *status = 0;
+
+ spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+ /* clear interrupt flags via a dummy read */
+ hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+ /* ISR loads it with new INT_STATUS */
+ hdq_data->hdq_irqstatus = 0;
+ spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+ hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val);
+
+ /* set the GO bit */
+ hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO,
+ OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+ /* wait for the TXCOMPLETE bit */
+ ret = wait_event_timeout(hdq_wait_queue,
+ hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+ if (ret == 0) {
+ dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+ goto out;
+ }
+
+ *status = hdq_data->hdq_irqstatus;
+ /* check irqstatus */
+ if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
+ dev_dbg(hdq_data->dev, "timeout waiting for"
+ "TXCOMPLETE/RXCOMPLETE, %x", *status);
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ /* wait for the GO bit return to zero */
+ ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+ OMAP_HDQ_CTRL_STATUS_GO,
+ OMAP_HDQ_FLAG_CLEAR, &tmp_status);
+ if (ret) {
+ dev_dbg(hdq_data->dev, "timeout waiting GO bit"
+ "return to zero, %x", tmp_status);
+ }
+
+out:
+ return ret;
+}
+
+/* HDQ Interrupt service routine */
+static irqreturn_t hdq_isr(int irq, void *_hdq)
+{
+ struct hdq_data *hdq_data = _hdq;
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+ hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+ spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+ dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus);
+
+ if (hdq_data->hdq_irqstatus &
+ (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE
+ | OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+ /* wake up sleeping process */
+ wake_up(&hdq_wait_queue);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* HDQ Mode: always return success */
+static u8 omap_w1_reset_bus(void *_hdq)
+{
+ return 0;
+}
+
+/* W1 search callback function */
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+ w1_slave_found_callback slave_found)
+{
+ u64 module_id, rn_le, cs, id;
+
+ if (w1_id)
+ module_id = w1_id;
+ else
+ module_id = 0x1;
+
+ rn_le = cpu_to_le64(module_id);
+ /*
+ * HDQ might not obey truly the 1-wire spec.
+ * So calculate CRC based on module parameter.
+ */
+ cs = w1_calc_crc8((u8 *)&rn_le, 7);
+ id = (cs << 56) | module_id;
+
+ slave_found(_hdq, id);
+}
+
+static int _omap_hdq_reset(struct hdq_data *hdq_data)
+{
+ int ret;
+ u8 tmp_status;
+
+ hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET);
+ /*
+ * Select HDQ mode & enable clocks.
+ * It is observed that INT flags can't be cleared via a read and GO/INIT
+ * won't return to zero if interrupt is disabled. So we always enable
+ * interrupt.
+ */
+ hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+ OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+ OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+
+ /* wait for reset to complete */
+ ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
+ OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
+ if (ret)
+ dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
+ tmp_status);
+ else {
+ hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+ OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+ OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+ hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+ OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+ }
+
+ return ret;
+}
+
+/* Issue break pulse to the device */
+static int omap_hdq_break(struct hdq_data *hdq_data)
+{
+ int ret = 0;
+ u8 tmp_status;
+ unsigned long irqflags;
+
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0) {
+ dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+ ret = -EINTR;
+ goto rtn;
+ }
+
+ spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+ /* clear interrupt flags via a dummy read */
+ hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+ /* ISR loads it with new INT_STATUS */
+ hdq_data->hdq_irqstatus = 0;
+ spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+ /* set the INIT and GO bit */
+ hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+ OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO,
+ OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+ OMAP_HDQ_CTRL_STATUS_GO);
+
+ /* wait for the TIMEOUT bit */
+ ret = wait_event_timeout(hdq_wait_queue,
+ hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+ if (ret == 0) {
+ dev_dbg(hdq_data->dev, "break wait elapsed\n");
+ ret = -EINTR;
+ goto out;
+ }
+
+ tmp_status = hdq_data->hdq_irqstatus;
+ /* check irqstatus */
+ if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+ dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x",
+ tmp_status);
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ /*
+ * wait for both INIT and GO bits rerurn to zero.
+ * zero wait time expected for interrupt mode.
+ */
+ ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+ OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+ OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR,
+ &tmp_status);
+ if (ret)
+ dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
+ "return to zero, %x", tmp_status);
+
+out:
+ mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+ return ret;
+}
+
+static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
+{
+ int ret = 0;
+ u8 status;
+ unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0) {
+ ret = -EINTR;
+ goto rtn;
+ }
+
+ if (!hdq_data->hdq_usecount) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+ hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+ OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
+ OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+ /*
+ * The RX comes immediately after TX. It
+ * triggers another interrupt before we
+ * sleep. So we have to wait for RXCOMPLETE bit.
+ */
+ while (!(hdq_data->hdq_irqstatus
+ & OMAP_HDQ_INT_STATUS_RXCOMPLETE)
+ && time_before(jiffies, timeout)) {
+ schedule_timeout_uninterruptible(1);
+ }
+ hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
+ OMAP_HDQ_CTRL_STATUS_DIR);
+ status = hdq_data->hdq_irqstatus;
+ /* check irqstatus */
+ if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+ dev_dbg(hdq_data->dev, "timeout waiting for"
+ "RXCOMPLETE, %x", status);
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ }
+ /* the data is ready. Read it in! */
+ *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA);
+out:
+ mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+ return 0;
+
+}
+
+/* Enable clocks and set the controller to HDQ mode */
+static int omap_hdq_get(struct hdq_data *hdq_data)
+{
+ int ret = 0;
+
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0) {
+ ret = -EINTR;
+ goto rtn;
+ }
+
+ if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) {
+ dev_dbg(hdq_data->dev, "attempt to exceed the max use count");
+ ret = -EINVAL;
+ goto out;
+ } else {
+ hdq_data->hdq_usecount++;
+ try_module_get(THIS_MODULE);
+ if (1 == hdq_data->hdq_usecount) {
+ if (clk_enable(hdq_data->hdq_ick)) {
+ dev_dbg(hdq_data->dev, "Can not enable ick\n");
+ ret = -ENODEV;
+ goto clk_err;
+ }
+ if (clk_enable(hdq_data->hdq_fck)) {
+ dev_dbg(hdq_data->dev, "Can not enable fck\n");
+ clk_disable(hdq_data->hdq_ick);
+ ret = -ENODEV;
+ goto clk_err;
+ }
+
+ /* make sure HDQ is out of reset */
+ if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
+ OMAP_HDQ_SYSSTATUS_RESETDONE)) {
+ ret = _omap_hdq_reset(hdq_data);
+ if (ret)
+ /* back up the count */
+ hdq_data->hdq_usecount--;
+ } else {
+ /* select HDQ mode & enable clocks */
+ hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+ OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+ OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+ hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+ OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+ hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+ }
+ }
+ }
+
+clk_err:
+ clk_put(hdq_data->hdq_ick);
+ clk_put(hdq_data->hdq_fck);
+out:
+ mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+ return ret;
+}
+
+/* Disable clocks to the module */
+static int omap_hdq_put(struct hdq_data *hdq_data)
+{
+ int ret = 0;
+
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0)
+ return -EINTR;
+
+ if (0 == hdq_data->hdq_usecount) {
+ dev_dbg(hdq_data->dev, "attempt to decrement use count"
+ "when it is zero");
+ ret = -EINVAL;
+ } else {
+ hdq_data->hdq_usecount--;
+ module_put(THIS_MODULE);
+ if (0 == hdq_data->hdq_usecount) {
+ clk_disable(hdq_data->hdq_ick);
+ clk_disable(hdq_data->hdq_fck);
+ }
+ }
+ mutex_unlock(&hdq_data->hdq_mutex);
+
+ return ret;
+}
+
+/* Read a byte of data from the device */
+static u8 omap_w1_read_byte(void *_hdq)
+{
+ struct hdq_data *hdq_data = _hdq;
+ u8 val = 0;
+ int ret;
+
+ ret = hdq_read_byte(hdq_data, &val);
+ if (ret) {
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0) {
+ dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+ return -EINTR;
+ }
+ hdq_data->init_trans = 0;
+ mutex_unlock(&hdq_data->hdq_mutex);
+ omap_hdq_put(hdq_data);
+ return -1;
+ }
+
+ /* Write followed by a read, release the module */
+ if (hdq_data->init_trans) {
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0) {
+ dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+ return -EINTR;
+ }
+ hdq_data->init_trans = 0;
+ mutex_unlock(&hdq_data->hdq_mutex);
+ omap_hdq_put(hdq_data);
+ }
+
+ return val;
+}
+
+/* Write a byte of data to the device */
+static void omap_w1_write_byte(void *_hdq, u8 byte)
+{
+ struct hdq_data *hdq_data = _hdq;
+ int ret;
+ u8 status;
+
+ /* First write to initialize the transfer */
+ if (hdq_data->init_trans == 0)
+ omap_hdq_get(hdq_data);
+
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0) {
+ dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+ return;
+ }
+ hdq_data->init_trans++;
+ mutex_unlock(&hdq_data->hdq_mutex);
+
+ ret = hdq_write_byte(hdq_data, byte, &status);
+ if (ret == 0) {
+ dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
+ return;
+ }
+
+ /* Second write, data transfered. Release the module */
+ if (hdq_data->init_trans > 1) {
+ omap_hdq_put(hdq_data);
+ ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+ if (ret < 0) {
+ dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+ return;
+ }
+ hdq_data->init_trans = 0;
+ mutex_unlock(&hdq_data->hdq_mutex);
+ }
+
+ return;
+}
+
+static int __init omap_hdq_probe(struct platform_device *pdev)
+{
+ struct hdq_data *hdq_data;
+ struct resource *res;
+ int ret, irq;
+ u8 rev;
+
+ hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL);
+ if (!hdq_data) {
+ dev_dbg(&pdev->dev, "unable to allocate memory\n");
+ ret = -ENOMEM;
+ goto err_kmalloc;
+ }
+
+ hdq_data->dev = &pdev->dev;
+ platform_set_drvdata(pdev, hdq_data);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_dbg(&pdev->dev, "unable to get resource\n");
+ ret = -ENXIO;
+ goto err_resource;
+ }
+
+ hdq_data->hdq_base = ioremap(res->start, SZ_4K);
+ if (!hdq_data->hdq_base) {
+ dev_dbg(&pdev->dev, "ioremap failed\n");
+ ret = -EINVAL;
+ goto err_ioremap;
+ }
+
+ /* get interface & functional clock objects */
+ hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick");
+ hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck");
+
+ if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) {
+ dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n");
+ if (IS_ERR(hdq_data->hdq_ick)) {
+ ret = PTR_ERR(hdq_data->hdq_ick);
+ goto err_clk;
+ }
+ if (IS_ERR(hdq_data->hdq_fck)) {
+ ret = PTR_ERR(hdq_data->hdq_fck);
+ clk_put(hdq_data->hdq_ick);
+ goto err_clk;
+ }
+ }
+
+ hdq_data->hdq_usecount = 0;
+ mutex_init(&hdq_data->hdq_mutex);
+
+ if (clk_enable(hdq_data->hdq_ick)) {
+ dev_dbg(&pdev->dev, "Can not enable ick\n");
+ ret = -ENODEV;
+ goto err_intfclk;
+ }
+
+ if (clk_enable(hdq_data->hdq_fck)) {
+ dev_dbg(&pdev->dev, "Can not enable fck\n");
+ ret = -ENODEV;
+ goto err_fnclk;
+ }
+
+ rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
+ dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
+ (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
+
+ spin_lock_init(&hdq_data->hdq_spinlock);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = -ENXIO;
+ goto err_irq;
+ }
+
+ ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "could not request irq\n");
+ goto err_irq;
+ }
+
+ omap_hdq_break(hdq_data);
+
+ /* don't clock the HDQ until it is needed */
+ clk_disable(hdq_data->hdq_ick);
+ clk_disable(hdq_data->hdq_fck);
+
+ omap_w1_master.data = hdq_data;
+
+ ret = w1_add_master_device(&omap_w1_master);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Failure in registering w1 master\n");
+ goto err_w1;
+ }
+
+ return 0;
+
+err_w1:
+err_irq:
+ clk_disable(hdq_data->hdq_fck);
+
+err_fnclk:
+ clk_disable(hdq_data->hdq_ick);
+
+err_intfclk:
+ clk_put(hdq_data->hdq_ick);
+ clk_put(hdq_data->hdq_fck);
+
+err_clk:
+ iounmap(hdq_data->hdq_base);
+
+err_ioremap:
+err_resource:
+ platform_set_drvdata(pdev, NULL);
+ kfree(hdq_data);
+
+err_kmalloc:
+ return ret;
+
+}
+
+static int omap_hdq_remove(struct platform_device *pdev)
+{
+ struct hdq_data *hdq_data = platform_get_drvdata(pdev);
+
+ mutex_lock(&hdq_data->hdq_mutex);
+
+ if (hdq_data->hdq_usecount) {
+ dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+ return -EBUSY;
+ }
+
+ mutex_unlock(&hdq_data->hdq_mutex);
+
+ /* remove module dependency */
+ clk_put(hdq_data->hdq_ick);
+ clk_put(hdq_data->hdq_fck);
+ free_irq(INT_24XX_HDQ_IRQ, hdq_data);
+ platform_set_drvdata(pdev, NULL);
+ iounmap(hdq_data->hdq_base);
+ kfree(hdq_data);
+
+ return 0;
+}
+
+static int __init
+omap_hdq_init(void)
+{
+ return platform_driver_register(&omap_hdq_driver);
+}
+module_init(omap_hdq_init);
+
+static void __exit
+omap_hdq_exit(void)
+{
+ platform_driver_unregister(&omap_hdq_driver);
+}
+module_exit(omap_hdq_exit);
+
+module_param(w1_id, int, S_IRUSR);
+MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection");
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("HDQ driver Library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 3df29a122f84..8d0b1fb1e52e 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -44,4 +44,11 @@ config W1_SLAVE_DS2760
If you are unsure, say N.
+config W1_SLAVE_BQ27000
+ tristate "BQ27000 slave support"
+ depends on W1
+ help
+ Say Y here if you want to use a hdq
+ bq27000 slave support.
+
endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index a8eb7524df1d..990f400b6d22 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
-
+obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
new file mode 100644
index 000000000000..8f4c91f6c680
--- /dev/null
+++ b/drivers/w1/slaves/w1_bq27000.c
@@ -0,0 +1,123 @@
+/*
+ * drivers/w1/slaves/w1_bq27000.c
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+
+#define HDQ_CMD_READ (0)
+#define HDQ_CMD_WRITE (1<<7)
+
+static int F_ID;
+
+void w1_bq27000_write(struct device *dev, u8 buf, u8 reg)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev) {
+ pr_info("Could not obtain slave dev ptr\n");
+ return;
+ }
+
+ w1_write_8(sl->master, HDQ_CMD_WRITE | reg);
+ w1_write_8(sl->master, buf);
+}
+EXPORT_SYMBOL(w1_bq27000_write);
+
+int w1_bq27000_read(struct device *dev, u8 reg)
+{
+ u8 val;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return 0;
+
+ w1_write_8(sl->master, HDQ_CMD_READ | reg);
+ val = w1_read_8(sl->master);
+
+ return val;
+}
+EXPORT_SYMBOL(w1_bq27000_read);
+
+static int w1_bq27000_add_slave(struct w1_slave *sl)
+{
+ int ret;
+ int id = 1;
+ struct platform_device *pdev;
+
+ pdev = platform_device_alloc("bq27000-battery", id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ return ret;
+ }
+ pdev->dev.parent = &sl->dev;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto pdev_add_failed;
+
+ dev_set_drvdata(&sl->dev, pdev);
+
+ goto success;
+
+pdev_add_failed:
+ platform_device_unregister(pdev);
+success:
+ return ret;
+}
+
+static void w1_bq27000_remove_slave(struct w1_slave *sl)
+{
+ struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+
+ platform_device_unregister(pdev);
+}
+
+static struct w1_family_ops w1_bq27000_fops = {
+ .add_slave = w1_bq27000_add_slave,
+ .remove_slave = w1_bq27000_remove_slave,
+};
+
+static struct w1_family w1_bq27000_family = {
+ .fid = 1,
+ .fops = &w1_bq27000_fops,
+};
+
+static int __init w1_bq27000_init(void)
+{
+ if (F_ID)
+ w1_bq27000_family.fid = F_ID;
+
+ return w1_register_family(&w1_bq27000_family);
+}
+
+static void __exit w1_bq27000_exit(void)
+{
+ w1_unregister_family(&w1_bq27000_family);
+}
+
+
+module_init(w1_bq27000_init);
+module_exit(w1_bq27000_exit);
+
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip");
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index cdaa6fffbfc7..97304bd83ec9 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl);
u8 w1_triplet(struct w1_master *dev, int bdir);
void w1_write_8(struct w1_master *, u8);
+u8 w1_read_8(struct w1_master *);
int w1_reset_bus(struct w1_master *);
u8 w1_calc_crc8(u8 *, int);
void w1_write_block(struct w1_master *, const u8 *, int);
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index f4f82f1f486e..0d15b0eaf79a 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir)
* @param dev the master device
* @return the byte read
*/
-static u8 w1_read_8(struct w1_master * dev)
+u8 w1_read_8(struct w1_master *dev)
{
int i;
u8 res = 0;
@@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev)
return res;
}
+EXPORT_SYMBOL_GPL(w1_read_8);
/**
* Writes a series of bytes.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 1a22fe782a27..4fd3fa5546b1 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -67,11 +67,11 @@ config AT91RM9200_WATCHDOG
system when the timeout is reached.
config AT91SAM9X_WATCHDOG
- tristate "AT91SAM9X watchdog"
- depends on WATCHDOG && (ARCH_AT91SAM9260 || ARCH_AT91SAM9261)
+ tristate "AT91SAM9X / AT91CAP9 watchdog"
+ depends on ARCH_AT91 && !ARCH_AT91RM9200
help
- Watchdog timer embedded into AT91SAM9X chips. This will reboot your
- system when the timeout is reached.
+ Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
+ reboot your system when the timeout is reached.
config 21285_WATCHDOG
tristate "DC21285 watchdog"
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b4babfc31586..b1da287f90ec 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -30,7 +30,7 @@
#include <linux/bitops.h>
#include <linux/uaccess.h>
-#include <asm/arch/at91_wdt.h>
+#include <mach/at91_wdt.h>
#define DRV_NAME "AT91SAM9 Watchdog"
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index c3b78a76f173..225398fd5049 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -42,8 +42,10 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
#ifdef CONFIG_FSL_BOOKE
#define WDTP(x) ((((63-x)&0x3)<<30)|(((63-x)&0x3c)<<15))
+#define WDTP_MASK (WDTP(0))
#else
#define WDTP(x) (TCR_WP(x))
+#define WDTP_MASK (TCR_WP_MASK)
#endif
static DEFINE_SPINLOCK(booke_wdt_lock);
@@ -65,6 +67,7 @@ static void __booke_wdt_enable(void *data)
/* clear status before enabling watchdog */
__booke_wdt_ping(NULL);
val = mfspr(SPRN_TCR);
+ val &= ~WDTP_MASK;
val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
mtspr(SPRN_TCR, val);
@@ -114,7 +117,7 @@ static long booke_wdt_ioctl(struct file *file,
case WDIOC_SETTIMEOUT:
if (get_user(booke_wdt_period, p))
return -EFAULT;
- mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) |
+ mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP_MASK) |
WDTP(booke_wdt_period));
return 0;
case WDIOC_GETTIMEOUT: