summaryrefslogtreecommitdiffstats
path: root/include/drm
diff options
context:
space:
mode:
Diffstat (limited to 'include/drm')
-rw-r--r--include/drm/drm_atomic.h154
-rw-r--r--include/drm/drm_crtc.h583
-rw-r--r--include/drm/drm_plane.h470
3 files changed, 625 insertions, 582 deletions
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index 856a9c85a838..9701f2dfb784 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -30,6 +30,160 @@
#include <drm/drm_crtc.h>
+/**
+ * struct drm_crtc_commit - track modeset commits on a CRTC
+ *
+ * This structure is used to track pending modeset changes and atomic commit on
+ * a per-CRTC basis. Since updating the list should never block this structure
+ * is reference counted to allow waiters to safely wait on an event to complete,
+ * without holding any locks.
+ *
+ * It has 3 different events in total to allow a fine-grained synchronization
+ * between outstanding updates::
+ *
+ * atomic commit thread hardware
+ *
+ * write new state into hardware ----> ...
+ * signal hw_done
+ * switch to new state on next
+ * ... v/hblank
+ *
+ * wait for buffers to show up ...
+ *
+ * ... send completion irq
+ * irq handler signals flip_done
+ * cleanup old buffers
+ *
+ * signal cleanup_done
+ *
+ * wait for flip_done <----
+ * clean up atomic state
+ *
+ * The important bit to know is that cleanup_done is the terminal event, but the
+ * ordering between flip_done and hw_done is entirely up to the specific driver
+ * and modeset state change.
+ *
+ * For an implementation of how to use this look at
+ * drm_atomic_helper_setup_commit() from the atomic helper library.
+ */
+struct drm_crtc_commit {
+ /**
+ * @crtc:
+ *
+ * DRM CRTC for this commit.
+ */
+ struct drm_crtc *crtc;
+
+ /**
+ * @ref:
+ *
+ * Reference count for this structure. Needed to allow blocking on
+ * completions without the risk of the completion disappearing
+ * meanwhile.
+ */
+ struct kref ref;
+
+ /**
+ * @flip_done:
+ *
+ * Will be signaled when the hardware has flipped to the new set of
+ * buffers. Signals at the same time as when the drm event for this
+ * commit is sent to userspace, or when an out-fence is singalled. Note
+ * that for most hardware, in most cases this happens after @hw_done is
+ * signalled.
+ */
+ struct completion flip_done;
+
+ /**
+ * @hw_done:
+ *
+ * Will be signalled when all hw register changes for this commit have
+ * been written out. Especially when disabling a pipe this can be much
+ * later than than @flip_done, since that can signal already when the
+ * screen goes black, whereas to fully shut down a pipe more register
+ * I/O is required.
+ *
+ * Note that this does not need to include separately reference-counted
+ * resources like backing storage buffer pinning, or runtime pm
+ * management.
+ */
+ struct completion hw_done;
+
+ /**
+ * @cleanup_done:
+ *
+ * Will be signalled after old buffers have been cleaned up by calling
+ * drm_atomic_helper_cleanup_planes(). Since this can only happen after
+ * a vblank wait completed it might be a bit later. This completion is
+ * useful to throttle updates and avoid hardware updates getting ahead
+ * of the buffer cleanup too much.
+ */
+ struct completion cleanup_done;
+
+ /**
+ * @commit_entry:
+ *
+ * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
+ */
+ struct list_head commit_entry;
+
+ /**
+ * @event:
+ *
+ * &drm_pending_vblank_event pointer to clean up private events.
+ */
+ struct drm_pending_vblank_event *event;
+};
+
+struct __drm_planes_state {
+ struct drm_plane *ptr;
+ struct drm_plane_state *state;
+};
+
+struct __drm_crtcs_state {
+ struct drm_crtc *ptr;
+ struct drm_crtc_state *state;
+ struct drm_crtc_commit *commit;
+};
+
+struct __drm_connnectors_state {
+ struct drm_connector *ptr;
+ struct drm_connector_state *state;
+};
+
+/**
+ * struct drm_atomic_state - the global state object for atomic updates
+ * @dev: parent DRM device
+ * @allow_modeset: allow full modeset
+ * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
+ * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL.
+ * @planes: pointer to array of structures with per-plane data
+ * @crtcs: pointer to array of CRTC pointers
+ * @num_connector: size of the @connectors and @connector_states arrays
+ * @connectors: pointer to array of structures with per-connector data
+ * @acquire_ctx: acquire context for this atomic modeset state update
+ */
+struct drm_atomic_state {
+ struct drm_device *dev;
+ bool allow_modeset : 1;
+ bool legacy_cursor_update : 1;
+ bool legacy_set_config : 1;
+ struct __drm_planes_state *planes;
+ struct __drm_crtcs_state *crtcs;
+ int num_connector;
+ struct __drm_connnectors_state *connectors;
+
+ struct drm_modeset_acquire_ctx *acquire_ctx;
+
+ /**
+ * @commit_work:
+ *
+ * Work item which can be used by the driver or helpers to execute the
+ * commit without blocking.
+ */
+ struct work_struct commit_work;
+};
+
void drm_crtc_commit_put(struct drm_crtc_commit *commit);
static inline void drm_crtc_commit_get(struct drm_crtc_commit *commit)
{
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 35b13fc6bbc1..9375e5c9cddb 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -44,6 +44,7 @@
#include <drm/drm_property.h>
#include <drm/drm_bridge.h>
#include <drm/drm_edid.h>
+#include <drm/drm_plane.h>
struct drm_device;
struct drm_mode_set;
@@ -657,525 +658,6 @@ struct drm_crtc {
};
/**
- * struct drm_plane_state - mutable plane state
- * @plane: backpointer to the plane
- * @crtc: currently bound CRTC, NULL if disabled
- * @fb: currently bound framebuffer
- * @fence: optional fence to wait for before scanning out @fb
- * @crtc_x: left position of visible portion of plane on crtc
- * @crtc_y: upper position of visible portion of plane on crtc
- * @crtc_w: width of visible portion of plane on crtc
- * @crtc_h: height of visible portion of plane on crtc
- * @src_x: left position of visible portion of plane within
- * plane (in 16.16)
- * @src_y: upper position of visible portion of plane within
- * plane (in 16.16)
- * @src_w: width of visible portion of plane (in 16.16)
- * @src_h: height of visible portion of plane (in 16.16)
- * @rotation: rotation of the plane
- * @zpos: priority of the given plane on crtc (optional)
- * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
- * where N is the number of active planes for given crtc
- * @src: clipped source coordinates of the plane (in 16.16)
- * @dst: clipped destination coordinates of the plane
- * @visible: visibility of the plane
- * @state: backpointer to global drm_atomic_state
- */
-struct drm_plane_state {
- struct drm_plane *plane;
-
- struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */
- struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */
- struct fence *fence;
-
- /* Signed dest location allows it to be partially off screen */
- int32_t crtc_x, crtc_y;
- uint32_t crtc_w, crtc_h;
-
- /* Source values are 16.16 fixed point */
- uint32_t src_x, src_y;
- uint32_t src_h, src_w;
-
- /* Plane rotation */
- unsigned int rotation;
-
- /* Plane zpos */
- unsigned int zpos;
- unsigned int normalized_zpos;
-
- /* Clipped coordinates */
- struct drm_rect src, dst;
-
- /*
- * Is the plane actually visible? Can be false even
- * if fb!=NULL and crtc!=NULL, due to clipping.
- */
- bool visible;
-
- struct drm_atomic_state *state;
-};
-
-
-/**
- * struct drm_plane_funcs - driver plane control functions
- */
-struct drm_plane_funcs {
- /**
- * @update_plane:
- *
- * This is the legacy entry point to enable and configure the plane for
- * the given CRTC and framebuffer. It is never called to disable the
- * plane, i.e. the passed-in crtc and fb paramters are never NULL.
- *
- * The source rectangle in frame buffer memory coordinates is given by
- * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
- * values). Devices that don't support subpixel plane coordinates can
- * ignore the fractional part.
- *
- * The destination rectangle in CRTC coordinates is given by the
- * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
- * Devices scale the source rectangle to the destination rectangle. If
- * scaling is not supported, and the source rectangle size doesn't match
- * the destination rectangle size, the driver must return a
- * -<errorname>EINVAL</errorname> error.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_update_plane() to implement this hook.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*update_plane)(struct drm_plane *plane,
- struct drm_crtc *crtc, struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h);
-
- /**
- * @disable_plane:
- *
- * This is the legacy entry point to disable the plane. The DRM core
- * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call
- * with the frame buffer ID set to 0. Disabled planes must not be
- * processed by the CRTC.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_disable_plane() to implement this hook.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*disable_plane)(struct drm_plane *plane);
-
- /**
- * @destroy:
- *
- * Clean up plane resources. This is only called at driver unload time
- * through drm_mode_config_cleanup() since a plane cannot be hotplugged
- * in DRM.
- */
- void (*destroy)(struct drm_plane *plane);
-
- /**
- * @reset:
- *
- * Reset plane hardware and software state to off. This function isn't
- * called by the core directly, only through drm_mode_config_reset().
- * It's not a helper hook only for historical reasons.
- *
- * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
- * atomic state using this hook.
- */
- void (*reset)(struct drm_plane *plane);
-
- /**
- * @set_property:
- *
- * This is the legacy entry point to update a property attached to the
- * plane.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_plane_set_property() to implement this hook.
- *
- * This callback is optional if the driver does not support any legacy
- * driver-private properties.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*set_property)(struct drm_plane *plane,
- struct drm_property *property, uint64_t val);
-
- /**
- * @atomic_duplicate_state:
- *
- * Duplicate the current atomic state for this plane and return it.
- * The core and helpers gurantee that any atomic state duplicated with
- * this hook and still owned by the caller (i.e. not transferred to the
- * driver by calling ->atomic_commit() from struct
- * &drm_mode_config_funcs) will be cleaned up by calling the
- * @atomic_destroy_state hook in this structure.
- *
- * Atomic drivers which don't subclass struct &drm_plane_state should use
- * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
- * state structure to extend it with driver-private state should use
- * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
- * duplicated in a consistent fashion across drivers.
- *
- * It is an error to call this hook before plane->state has been
- * initialized correctly.
- *
- * NOTE:
- *
- * If the duplicate state references refcounted resources this hook must
- * acquire a reference for each of them. The driver must release these
- * references again in @atomic_destroy_state.
- *
- * RETURNS:
- *
- * Duplicated atomic state or NULL when the allocation failed.
- */
- struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
-
- /**
- * @atomic_destroy_state:
- *
- * Destroy a state duplicated with @atomic_duplicate_state and release
- * or unreference all resources it references
- */
- void (*atomic_destroy_state)(struct drm_plane *plane,
- struct drm_plane_state *state);
-
- /**
- * @atomic_set_property:
- *
- * Decode a driver-private property value and store the decoded value
- * into the passed-in state structure. Since the atomic core decodes all
- * standardized properties (even for extensions beyond the core set of
- * properties which might not be implemented by all drivers) this
- * requires drivers to subclass the state structure.
- *
- * Such driver-private properties should really only be implemented for
- * truly hardware/vendor specific state. Instead it is preferred to
- * standardize atomic extension and decode the properties used to expose
- * such an extension in the core.
- *
- * Do not call this function directly, use
- * drm_atomic_plane_set_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * NOTE:
- *
- * This function is called in the state assembly phase of atomic
- * modesets, which can be aborted for any reason (including on
- * userspace's request to just check whether a configuration would be
- * possible). Drivers MUST NOT touch any persistent state (hardware or
- * software) or data structures except the passed in @state parameter.
- *
- * Also since userspace controls in which order properties are set this
- * function must not do any input validation (since the state update is
- * incomplete and hence likely inconsistent). Instead any such input
- * validation must be done in the various atomic_check callbacks.
- *
- * RETURNS:
- *
- * 0 if the property has been found, -EINVAL if the property isn't
- * implemented by the driver (which shouldn't ever happen, the core only
- * asks for properties attached to this plane). No other validation is
- * allowed by the driver. The core already checks that the property
- * value is within the range (integer, valid enum value, ...) the driver
- * set when registering the property.
- */
- int (*atomic_set_property)(struct drm_plane *plane,
- struct drm_plane_state *state,
- struct drm_property *property,
- uint64_t val);
-
- /**
- * @atomic_get_property:
- *
- * Reads out the decoded driver-private property. This is used to
- * implement the GETPLANE IOCTL.
- *
- * Do not call this function directly, use
- * drm_atomic_plane_get_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * RETURNS:
- *
- * 0 on success, -EINVAL if the property isn't implemented by the
- * driver (which should never happen, the core only asks for
- * properties attached to this plane).
- */
- int (*atomic_get_property)(struct drm_plane *plane,
- const struct drm_plane_state *state,
- struct drm_property *property,
- uint64_t *val);
- /**
- * @late_register:
- *
- * This optional hook can be used to register additional userspace
- * interfaces attached to the plane like debugfs interfaces.
- * It is called late in the driver load sequence from drm_dev_register().
- * Everything added from this callback should be unregistered in
- * the early_unregister callback.
- *
- * Returns:
- *
- * 0 on success, or a negative error code on failure.
- */
- int (*late_register)(struct drm_plane *plane);
-
- /**
- * @early_unregister:
- *
- * This optional hook should be used to unregister the additional
- * userspace interfaces attached to the plane from
- * late_unregister(). It is called from drm_dev_unregister(),
- * early in the driver unload sequence to disable userspace access
- * before data structures are torndown.
- */
- void (*early_unregister)(struct drm_plane *plane);
-};
-
-enum drm_plane_type {
- DRM_PLANE_TYPE_OVERLAY,
- DRM_PLANE_TYPE_PRIMARY,
- DRM_PLANE_TYPE_CURSOR,
-};
-
-
-/**
- * struct drm_plane - central DRM plane control structure
- * @dev: DRM device this plane belongs to
- * @head: for list management
- * @name: human readable name, can be overwritten by the driver
- * @base: base mode object
- * @possible_crtcs: pipes this plane can be bound to
- * @format_types: array of formats supported by this plane
- * @format_count: number of formats supported
- * @format_default: driver hasn't supplied supported formats for the plane
- * @crtc: currently bound CRTC
- * @fb: currently bound fb
- * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by
- * drm_mode_set_config_internal() to implement correct refcounting.
- * @funcs: helper functions
- * @properties: property tracking for this plane
- * @type: type of plane (overlay, primary, cursor)
- * @state: current atomic state for this plane
- * @zpos_property: zpos property for this plane
- * @helper_private: mid-layer private data
- */
-struct drm_plane {
- struct drm_device *dev;
- struct list_head head;
-
- char *name;
-
- /**
- * @mutex:
- *
- * Protects modeset plane state, together with the mutex of &drm_crtc
- * this plane is linked to (when active, getting actived or getting
- * disabled).
- */
- struct drm_modeset_lock mutex;
-
- struct drm_mode_object base;
-
- uint32_t possible_crtcs;
- uint32_t *format_types;
- unsigned int format_count;
- bool format_default;
-
- struct drm_crtc *crtc;
- struct drm_framebuffer *fb;
-
- struct drm_framebuffer *old_fb;
-
- const struct drm_plane_funcs *funcs;
-
- struct drm_object_properties properties;
-
- enum drm_plane_type type;
-
- /**
- * @index: Position inside the mode_config.list, can be used as an array
- * index. It is invariant over the lifetime of the plane.
- */
- unsigned index;
-
- const struct drm_plane_helper_funcs *helper_private;
-
- struct drm_plane_state *state;
-
- struct drm_property *zpos_property;
-};
-
-/**
- * struct drm_crtc_commit - track modeset commits on a CRTC
- *
- * This structure is used to track pending modeset changes and atomic commit on
- * a per-CRTC basis. Since updating the list should never block this structure
- * is reference counted to allow waiters to safely wait on an event to complete,
- * without holding any locks.
- *
- * It has 3 different events in total to allow a fine-grained synchronization
- * between outstanding updates::
- *
- * atomic commit thread hardware
- *
- * write new state into hardware ----> ...
- * signal hw_done
- * switch to new state on next
- * ... v/hblank
- *
- * wait for buffers to show up ...
- *
- * ... send completion irq
- * irq handler signals flip_done
- * cleanup old buffers
- *
- * signal cleanup_done
- *
- * wait for flip_done <----
- * clean up atomic state
- *
- * The important bit to know is that cleanup_done is the terminal event, but the
- * ordering between flip_done and hw_done is entirely up to the specific driver
- * and modeset state change.
- *
- * For an implementation of how to use this look at
- * drm_atomic_helper_setup_commit() from the atomic helper library.
- */
-struct drm_crtc_commit {
- /**
- * @crtc:
- *
- * DRM CRTC for this commit.
- */
- struct drm_crtc *crtc;
-
- /**
- * @ref:
- *
- * Reference count for this structure. Needed to allow blocking on
- * completions without the risk of the completion disappearing
- * meanwhile.
- */
- struct kref ref;
-
- /**
- * @flip_done:
- *
- * Will be signaled when the hardware has flipped to the new set of
- * buffers. Signals at the same time as when the drm event for this
- * commit is sent to userspace, or when an out-fence is singalled. Note
- * that for most hardware, in most cases this happens after @hw_done is
- * signalled.
- */
- struct completion flip_done;
-
- /**
- * @hw_done:
- *
- * Will be signalled when all hw register changes for this commit have
- * been written out. Especially when disabling a pipe this can be much
- * later than than @flip_done, since that can signal already when the
- * screen goes black, whereas to fully shut down a pipe more register
- * I/O is required.
- *
- * Note that this does not need to include separately reference-counted
- * resources like backing storage buffer pinning, or runtime pm
- * management.
- */
- struct completion hw_done;
-
- /**
- * @cleanup_done:
- *
- * Will be signalled after old buffers have been cleaned up by calling
- * drm_atomic_helper_cleanup_planes(). Since this can only happen after
- * a vblank wait completed it might be a bit later. This completion is
- * useful to throttle updates and avoid hardware updates getting ahead
- * of the buffer cleanup too much.
- */
- struct completion cleanup_done;
-
- /**
- * @commit_entry:
- *
- * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
- */
- struct list_head commit_entry;
-
- /**
- * @event:
- *
- * &drm_pending_vblank_event pointer to clean up private events.
- */
- struct drm_pending_vblank_event *event;
-};
-
-struct __drm_planes_state {
- struct drm_plane *ptr;
- struct drm_plane_state *state;
-};
-
-struct __drm_crtcs_state {
- struct drm_crtc *ptr;
- struct drm_crtc_state *state;
- struct drm_crtc_commit *commit;
-};
-
-struct __drm_connnectors_state {
- struct drm_connector *ptr;
- struct drm_connector_state *state;
-};
-
-/**
- * struct drm_atomic_state - the global state object for atomic updates
- * @dev: parent DRM device
- * @allow_modeset: allow full modeset
- * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
- * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL.
- * @planes: pointer to array of structures with per-plane data
- * @crtcs: pointer to array of CRTC pointers
- * @num_connector: size of the @connectors and @connector_states arrays
- * @connectors: pointer to array of structures with per-connector data
- * @acquire_ctx: acquire context for this atomic modeset state update
- */
-struct drm_atomic_state {
- struct drm_device *dev;
- bool allow_modeset : 1;
- bool legacy_cursor_update : 1;
- bool legacy_set_config : 1;
- struct __drm_planes_state *planes;
- struct __drm_crtcs_state *crtcs;
- int num_connector;
- struct __drm_connnectors_state *connectors;
-
- struct drm_modeset_acquire_ctx *acquire_ctx;
-
- /**
- * @commit_work:
- *
- * Work item which can be used by the driver or helpers to execute the
- * commit without blocking.
- */
- struct work_struct commit_work;
-};
-
-
-/**
* struct drm_mode_set - new values for a CRTC config change
* @fb: framebuffer to use for new config
* @crtc: CRTC whose configuration we're about to change
@@ -1825,20 +1307,7 @@ struct drm_mode_config {
struct drm_mode_config_helper_funcs *helper_private;
};
-/**
- * drm_for_each_plane_mask - iterate over planes specified by bitmask
- * @plane: the loop cursor
- * @dev: the DRM device
- * @plane_mask: bitmask of plane indices
- *
- * Iterate over all planes specified by bitmask.
- */
-#define drm_for_each_plane_mask(plane, dev, plane_mask) \
- list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
- for_each_if ((plane_mask) & (1 << drm_plane_index(plane)))
-
#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
-#define obj_to_plane(x) container_of(x, struct drm_plane, base)
extern __printf(6, 7)
int drm_crtc_init_with_planes(struct drm_device *dev,
@@ -1873,36 +1342,6 @@ static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc)
return 1 << drm_crtc_index(crtc);
}
-extern __printf(8, 9)
-int drm_universal_plane_init(struct drm_device *dev,
- struct drm_plane *plane,
- unsigned long possible_crtcs,
- const struct drm_plane_funcs *funcs,
- const uint32_t *formats,
- unsigned int format_count,
- enum drm_plane_type type,
- const char *name, ...);
-extern int drm_plane_init(struct drm_device *dev,
- struct drm_plane *plane,
- unsigned long possible_crtcs,
- const struct drm_plane_funcs *funcs,
- const uint32_t *formats, unsigned int format_count,
- bool is_primary);
-extern void drm_plane_cleanup(struct drm_plane *plane);
-
-/**
- * drm_plane_index - find the index of a registered plane
- * @plane: plane to find index for
- *
- * Given a registered plane, return the index of that plane within a DRM
- * device's list of planes.
- */
-static inline unsigned int drm_plane_index(struct drm_plane *plane)
-{
- return plane->index;
-}
-extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx);
-extern void drm_plane_force_disable(struct drm_plane *plane);
extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
int *hdisplay, int *vdisplay);
extern int drm_crtc_force_disable(struct drm_crtc *crtc);
@@ -1924,10 +1363,6 @@ extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
extern void drm_mode_put_tile_group(struct drm_device *dev,
struct drm_tile_group *tg);
-extern int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
- struct drm_property *property,
- uint64_t value);
-
extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
unsigned int supported_rotations);
extern unsigned int drm_rotation_simplify(unsigned int rotation,
@@ -1945,14 +1380,6 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
unsigned int zpos);
/* Helpers */
-static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
- uint32_t id)
-{
- struct drm_mode_object *mo;
- mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PLANE);
- return mo ? obj_to_plane(mo) : NULL;
-}
-
static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
uint32_t id)
{
@@ -1980,14 +1407,6 @@ static inline uint32_t drm_color_lut_extract(uint32_t user_input,
return clamp_val(val, 0, max);
}
-/* Plane list iterator for legacy (overlay only) planes. */
-#define drm_for_each_legacy_plane(plane, dev) \
- list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
- for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
-
-#define drm_for_each_plane(plane, dev) \
- list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
-
#define drm_for_each_crtc(crtc, dev) \
list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
new file mode 100644
index 000000000000..1407715736a5
--- /dev/null
+++ b/include/drm/drm_plane.h
@@ -0,0 +1,470 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __DRM_PLANE_H__
+#define __DRM_PLANE_H__
+
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <drm/drm_mode_object.h>
+
+struct drm_crtc;
+
+/**
+ * struct drm_plane_state - mutable plane state
+ * @plane: backpointer to the plane
+ * @crtc: currently bound CRTC, NULL if disabled
+ * @fb: currently bound framebuffer
+ * @fence: optional fence to wait for before scanning out @fb
+ * @crtc_x: left position of visible portion of plane on crtc
+ * @crtc_y: upper position of visible portion of plane on crtc
+ * @crtc_w: width of visible portion of plane on crtc
+ * @crtc_h: height of visible portion of plane on crtc
+ * @src_x: left position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_y: upper position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_w: width of visible portion of plane (in 16.16)
+ * @src_h: height of visible portion of plane (in 16.16)
+ * @rotation: rotation of the plane
+ * @zpos: priority of the given plane on crtc (optional)
+ * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
+ * where N is the number of active planes for given crtc
+ * @src: clipped source coordinates of the plane (in 16.16)
+ * @dst: clipped destination coordinates of the plane
+ * @visible: visibility of the plane
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_plane_state {
+ struct drm_plane *plane;
+
+ struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */
+ struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */
+ struct fence *fence;
+
+ /* Signed dest location allows it to be partially off screen */
+ int32_t crtc_x, crtc_y;
+ uint32_t crtc_w, crtc_h;
+
+ /* Source values are 16.16 fixed point */
+ uint32_t src_x, src_y;
+ uint32_t src_h, src_w;
+
+ /* Plane rotation */
+ unsigned int rotation;
+
+ /* Plane zpos */
+ unsigned int zpos;
+ unsigned int normalized_zpos;
+
+ /* Clipped coordinates */
+ struct drm_rect src, dst;
+
+ /*
+ * Is the plane actually visible? Can be false even
+ * if fb!=NULL and crtc!=NULL, due to clipping.
+ */
+ bool visible;
+
+ struct drm_atomic_state *state;
+};
+
+
+/**
+ * struct drm_plane_funcs - driver plane control functions
+ */
+struct drm_plane_funcs {
+ /**
+ * @update_plane:
+ *
+ * This is the legacy entry point to enable and configure the plane for
+ * the given CRTC and framebuffer. It is never called to disable the
+ * plane, i.e. the passed-in crtc and fb paramters are never NULL.
+ *
+ * The source rectangle in frame buffer memory coordinates is given by
+ * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
+ * values). Devices that don't support subpixel plane coordinates can
+ * ignore the fractional part.
+ *
+ * The destination rectangle in CRTC coordinates is given by the
+ * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
+ * Devices scale the source rectangle to the destination rectangle. If
+ * scaling is not supported, and the source rectangle size doesn't match
+ * the destination rectangle size, the driver must return a
+ * -<errorname>EINVAL</errorname> error.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_update_plane() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*update_plane)(struct drm_plane *plane,
+ struct drm_crtc *crtc, struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h);
+
+ /**
+ * @disable_plane:
+ *
+ * This is the legacy entry point to disable the plane. The DRM core
+ * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call
+ * with the frame buffer ID set to 0. Disabled planes must not be
+ * processed by the CRTC.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_disable_plane() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*disable_plane)(struct drm_plane *plane);
+
+ /**
+ * @destroy:
+ *
+ * Clean up plane resources. This is only called at driver unload time
+ * through drm_mode_config_cleanup() since a plane cannot be hotplugged
+ * in DRM.
+ */
+ void (*destroy)(struct drm_plane *plane);
+
+ /**
+ * @reset:
+ *
+ * Reset plane hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
+ * atomic state using this hook.
+ */
+ void (*reset)(struct drm_plane *plane);
+
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * plane.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_plane_set_property() to implement this hook.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*set_property)(struct drm_plane *plane,
+ struct drm_property *property, uint64_t val);
+
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this plane and return it.
+ * The core and helpers gurantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling ->atomic_commit() from struct
+ * &drm_mode_config_funcs) will be cleaned up by calling the
+ * @atomic_destroy_state hook in this structure.
+ *
+ * Atomic drivers which don't subclass struct &drm_plane_state should use
+ * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before plane->state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
+ struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ */
+ void (*atomic_destroy_state)(struct drm_plane *plane,
+ struct drm_plane_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_plane_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which shouldn't ever happen, the core only
+ * asks for properties attached to this plane). No other validation is
+ * allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
+ int (*atomic_set_property)(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ struct drm_property *property,
+ uint64_t val);
+
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETPLANE IOCTL.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_plane_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which should never happen, the core only asks for
+ * properties attached to this plane).
+ */
+ int (*atomic_get_property)(struct drm_plane *plane,
+ const struct drm_plane_state *state,
+ struct drm_property *property,
+ uint64_t *val);
+ /**
+ * @late_register:
+ *
+ * This optional hook can be used to register additional userspace
+ * interfaces attached to the plane like debugfs interfaces.
+ * It is called late in the driver load sequence from drm_dev_register().
+ * Everything added from this callback should be unregistered in
+ * the early_unregister callback.
+ *
+ * Returns:
+ *
+ * 0 on success, or a negative error code on failure.
+ */
+ int (*late_register)(struct drm_plane *plane);
+
+ /**
+ * @early_unregister:
+ *
+ * This optional hook should be used to unregister the additional
+ * userspace interfaces attached to the plane from
+ * late_unregister(). It is called from drm_dev_unregister(),
+ * early in the driver unload sequence to disable userspace access
+ * before data structures are torndown.
+ */
+ void (*early_unregister)(struct drm_plane *plane);
+};
+
+enum drm_plane_type {
+ DRM_PLANE_TYPE_OVERLAY,
+ DRM_PLANE_TYPE_PRIMARY,
+ DRM_PLANE_TYPE_CURSOR,
+};
+
+
+/**
+ * struct drm_plane - central DRM plane control structure
+ * @dev: DRM device this plane belongs to
+ * @head: for list management
+ * @name: human readable name, can be overwritten by the driver
+ * @base: base mode object
+ * @possible_crtcs: pipes this plane can be bound to
+ * @format_types: array of formats supported by this plane
+ * @format_count: number of formats supported
+ * @format_default: driver hasn't supplied supported formats for the plane
+ * @crtc: currently bound CRTC
+ * @fb: currently bound fb
+ * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by
+ * drm_mode_set_config_internal() to implement correct refcounting.
+ * @funcs: helper functions
+ * @properties: property tracking for this plane
+ * @type: type of plane (overlay, primary, cursor)
+ * @state: current atomic state for this plane
+ * @zpos_property: zpos property for this plane
+ * @helper_private: mid-layer private data
+ */
+struct drm_plane {
+ struct drm_device *dev;
+ struct list_head head;
+
+ char *name;
+
+ /**
+ * @mutex:
+ *
+ * Protects modeset plane state, together with the mutex of &drm_crtc
+ * this plane is linked to (when active, getting actived or getting
+ * disabled).
+ */
+ struct drm_modeset_lock mutex;
+
+ struct drm_mode_object base;
+
+ uint32_t possible_crtcs;
+ uint32_t *format_types;
+ unsigned int format_count;
+ bool format_default;
+
+ struct drm_crtc *crtc;
+ struct drm_framebuffer *fb;
+
+ struct drm_framebuffer *old_fb;
+
+ const struct drm_plane_funcs *funcs;
+
+ struct drm_object_properties properties;
+
+ enum drm_plane_type type;
+
+ /**
+ * @index: Position inside the mode_config.list, can be used as an array
+ * index. It is invariant over the lifetime of the plane.
+ */
+ unsigned index;
+
+ const struct drm_plane_helper_funcs *helper_private;
+
+ struct drm_plane_state *state;
+
+ struct drm_property *zpos_property;
+};
+
+#define obj_to_plane(x) container_of(x, struct drm_plane, base)
+
+extern __printf(8, 9)
+int drm_universal_plane_init(struct drm_device *dev,
+ struct drm_plane *plane,
+ unsigned long possible_crtcs,
+ const struct drm_plane_funcs *funcs,
+ const uint32_t *formats,
+ unsigned int format_count,
+ enum drm_plane_type type,
+ const char *name, ...);
+extern int drm_plane_init(struct drm_device *dev,
+ struct drm_plane *plane,
+ unsigned long possible_crtcs,
+ const struct drm_plane_funcs *funcs,
+ const uint32_t *formats, unsigned int format_count,
+ bool is_primary);
+extern void drm_plane_cleanup(struct drm_plane *plane);
+
+/**
+ * drm_plane_index - find the index of a registered plane
+ * @plane: plane to find index for
+ *
+ * Given a registered plane, return the index of that plane within a DRM
+ * device's list of planes.
+ */
+static inline unsigned int drm_plane_index(struct drm_plane *plane)
+{
+ return plane->index;
+}
+extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx);
+extern void drm_plane_force_disable(struct drm_plane *plane);
+
+int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
+ struct drm_property *property,
+ uint64_t value);
+
+/**
+ * drm_plane_find - find a &drm_plane
+ * @dev: DRM device
+ * @id: plane id
+ *
+ * Returns the plane with @id, NULL if it doesn't exist. Simple wrapper around
+ * drm_mode_object_find().
+ */
+static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
+ uint32_t id)
+{
+ struct drm_mode_object *mo;
+ mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PLANE);
+ return mo ? obj_to_plane(mo) : NULL;
+}
+
+/**
+ * drm_for_each_plane_mask - iterate over planes specified by bitmask
+ * @plane: the loop cursor
+ * @dev: the DRM device
+ * @plane_mask: bitmask of plane indices
+ *
+ * Iterate over all planes specified by bitmask.
+ */
+#define drm_for_each_plane_mask(plane, dev, plane_mask) \
+ list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
+ for_each_if ((plane_mask) & (1 << drm_plane_index(plane)))
+
+/* Plane list iterator for legacy (overlay only) planes. */
+#define drm_for_each_legacy_plane(plane, dev) \
+ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
+ for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+
+#define drm_for_each_plane(plane, dev) \
+ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
+
+
+#endif