summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/vga
Commit message (Collapse)AuthorAgeFilesLines
* drm: Do delayed switcheroo in drm_lastclose()Thomas Zimmermann2024-08-131-2/+1
| | | | | | | | | | | | | | | | | Amdgpu and nouveau call vga_switcheroo_process_delayed_switch() from their lastclose callbacks. Call it from drm_lastclose(), so that the driver functions can finally be removed. Only PCI devices with enabled switcheroo do the delayed switching. The call has no effect on other hardware. v2: - move change to drm_lastclose() (Sima) - update docs for vga_switcheroo_process_delayed_switch() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-2-tzimmermann@suse.de
* PCI/VGA: Move vgaarb to drivers/pciBjorn Helgaas2022-03-093-1587/+0
| | | | | | | | | | | | | | | | | | | | The VGA arbiter is really PCI-specific and doesn't depend on any GPU things. Move it to the PCI subsystem. Note that misc_init() must be called before vga_arb_device_init(). These are both subsys_initcalls, so this ordering depends on the link order, which is determined by drivers/Makefile: obj-y += pci/ obj-y += char/ <-- misc_init() obj-y += gpu/ <-- vga_arb_device_init() (before this commit) The drivers/pci/ subsys_initcalls are called *before* misc_init(), so convert vga_arb_device_init() to subsys_initcall_sync(), which is called after *all* subsys_initcalls. Link: https://lore.kernel.org/r/20220224224753.297579-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* vgaarb: don't pass a cookie to vga_client_registerChristoph Hellwig2021-07-211-14/+10
| | | | | | | | | | The VGA arbitration is entirely based on pci_dev structures, so just pass that back to the set_vga_decode callback. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-8-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
* vgaarb: remove the unused irq_set_state argument to vga_client_registerChristoph Hellwig2021-07-211-22/+1
| | | | | | | | | | All callers pass NULL as the irq_set_state argument, so remove it and the ->irq_set_state member in struct vga_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-7-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
* vgaarb: provide a vga_client_unregister wrapperChristoph Hellwig2021-07-211-2/+1
| | | | | | | | | | Add a trivial wrapper for the unregister case that sets all fields to NULL. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-6-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
* vgaarb: move the kerneldoc for vga_set_legacy_decoding to vgaarb.cChristoph Hellwig2021-07-211-0/+11
| | | | | | | | | | Kerneldoc comments should be at the implementation side, not in the header just declaring the prototype. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-4-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
* vgaarb: remove vga_conflictsChristoph Hellwig2021-07-211-6/+0
| | | | | | | | | | | vga_conflicts only has a single caller and none of the arch overrides mentioned in the comment. Just remove it and the thus dead check in the caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-3-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
* vgaarb: Use ACPI HID name to find integrated GPUKai-Heng Feng2021-05-201-5/+26
| | | | | | | | | | | | | | | Commit 3d42f1ddc47a ("vgaarb: Keep adding VGA device in queue") assumes the first device is an integrated GPU. However, on AMD platforms an integrated GPU can have higher PCI device number than a discrete GPU. Integrated GPU on ACPI platform generally has _DOD and _DOS method, so use that as predicate to find integrated GPU. If the new strategy doesn't work, fallback to use the first device as boot VGA. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210519135723.525997-1-kai.heng.feng@canonical.com
* Merge tag 'pci-v5.11-changes' of ↵Linus Torvalds2020-12-151-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Decode PCIe 64 GT/s link speed (Gustavo Pimentel) - Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit) - Reduce pci_set_cacheline_size() message to debug level (Heiner Kallweit) - Fix pci_slot_release() NULL pointer dereference (Jubin Zhong) - Unify ECAM constants in native PCI Express drivers (Krzysztof Wilczyński) - Return u8 from pci_find_capability() and similar (Puranjay Mohan) - Return u16 from pci_find_ext_capability() and similar (Bjorn Helgaas) - Fix ACPI companion lookup for device 0 on the root bus (Rafael J. Wysocki) Resource management: - Keep both device and resource name for config space remaps (Alexander Lobakin) - Bounds-check command-line resource alignment requests (Bjorn Helgaas) - Fix overflow in command-line resource alignment requests (Colin Ian King) Driver binding: - Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan) Power management: - Save/restore Precision Time Measurement Capability for suspend/resume (David E. Box) - Disable PTM during suspend to save power (David E. Box) - Add sysfs attribute for device power state (Maximilian Luz) - Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg) - Do not generate wakeup event when runtime resuming device (Mika Westerberg) - Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar) Virtualization: - Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher) - Add function 1 DMA alias quirk for Marvell 9215 SATA controller (Bjorn Helgaas) MSI: - Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko) - Improve warnings for 32-bit-limited MSI support (Vidya Sagar) Error handling: - Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V Kelley) - Rename reset_link() to reset_subordinates() (Sean V Kelley) - Write AER Capability only when we control it (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Bind RCEC devices to the Root Port driver (Qiuxu Zhuo) - Recover from RCiEP AER errors (Qiuxu Zhuo) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley) - Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) Broadcom iProc PCIe controller driver: - Fix out-of-bound array accesses (Bharat Gooty) - Invalidate correct PAXB inbound windows (Roman Bacik) - Enhance PCIe Link information display (Srinath Mannam) Cadence PCIe controller driver: - Make "cdns,max-outbound-regions" property optional (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Offset client MSI-X vectors (Jon Derrick) - Update type of __iomem pointers (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Move "dbi" accesses to post common DWC initialization (Vidya Sagar) - Read "dbi" base address to program in application logic (Vidya Sagar) - Fix ASPM-L1SS advertisement disable code (Vidya Sagar) - Set DesignWare IP version (Vidya Sagar) - Continue unconfig sequence even if parts fail (Vidya Sagar) - Check return value of tegra_pcie_init_controller() (Vidya Sagar) - Disable LTSSM during L2 entry (Vidya Sagar) Qualcomm PCIe controller driver: - Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam) - Add SM8250 SoC support (Manivannan Sadhasivam) - Add support for configuring BDF to SID mapping for SM8250 (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - rcar: Drop unused members from struct rcar_pcie_host (Lad Prabhakar) - PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar) - PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro Shimoda) - PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda) Samsung Exynos PCIe controller driver: - Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung) - Rework driver to support Exynos5433 variant (Jaehoon Chung) - Drop samsung,exynos5440-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie-phy binding (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Support multiple ATU memory regions (Rob Herring) - Move intel-gw ATU offset out of driver match data (Rob Herring) - Move "dbi", "dbi2", and "addr_space" resource setup into common code (Rob Herring) - Remove intel-gw unneeded function wrappers (Rob Herring) - Ensure all outbound ATU windows are reset (Rob Herring) - Use the common MSI irq_chip in dra7xx (Rob Herring) - Drop the .set_num_vectors() host op (Rob Herring) - Move MSI interrupt setup into DWC common code (Rob Herring) - Rework MSI initialization (Rob Herring) - Move link handling into common code (Rob Herring) - Move dw_pcie_msi_init() into core (Rob Herring) - Move dw_pcie_setup_rc() to DWC common code (Rob Herring) - Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring) - Drop keystone duplicated 'num-viewport'" (Rob Herring) - Move inbound and outbound windows to common struct (Rob Herring) - Detect number of iATU windows (Rob Herring) - Warn if non-prefetchable memory aperture size is > 32-bit (Vidya Sagar) - Add support to program ATU for >4GB memory (Vidya Sagar) - Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar) TI J721E PCIe driver: - Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I) - Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Enable compile-testing on !ARM (Alex Dewar)" * tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller PCI/ACPI: Fix companion lookup for device 0 on the root bus PCI: Keep both device and resource name for config space remaps PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c PCI: vmd: Update type of the __iomem pointers PCI: iproc: Convert to use the new ECAM constants PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser PCI: Unify ECAM constants in native PCI Express drivers PCI: Disable PTM during suspend to save power PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume PCI: Mark AMD Raven iGPU ATS as broken in some platforms PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument PCI: dwc: Set 32-bit DMA mask for MSI target address allocation PCI: qcom: Add support for configuring BDF to SID mapping for SM8250 PCI: Reduce pci_set_cacheline_size() message to debug level PCI: Remove unused HAVE_PCI_SET_MWI PCI: qcom: Add SM8250 SoC support ...
| * PCI/PM: Rename pci_wakeup_bus() to pci_resume_bus()Mika Westerberg2020-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A "wakeup" is a signal from a device telling the system that the device or the whole system should be awakened and made active. PCI devices are made active by "resuming" them. pci_wakeup_bus() is not involved with the wakeup signal; it *resumes* devices on a bus (possibly in response to a wakeup signal, but that's at a higher level). Rename pci_wakeup_bus() to pci_resume_bus() to better reflect what it does. No functional change intended. [bhelgaas: commit log, reorder before removal of pci_wakeup_event()] Link: https://lore.kernel.org/r/20201125090733.77782-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | vga_switcheroo: simplify the return expression of vga_switcheroo_runtime_resumeQinglang Miao2020-09-221-6/+1
|/ | | | | | | | Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200921131110.93365-1-miaoqinglang@huawei.com
* vgaarb: mark vga_tryget staticChristoph Hellwig2020-08-011-2/+1
| | | | | | | | This symbols isn't used anywhere outside of vgaarb.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200801061713.307434-1-hch@lst.de
* vga: Fix Kconfig indentationKrzysztof Kozlowski2019-11-201-1/+1
| | | | | | | | | | Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191120133327.6519-1-krzk@kernel.org
* Merge tag 'topic/remove-fbcon-notifiers-2019-06-26' into drm-misc-next-fixesMaarten Lankhorst2019-06-261-0/+1
|\ | | | | | | | | | | | | | | | | topic/remove-fbcon-notifiers: - Export fbcon_update_vcs to fix sh_mobile_lcdcfb.c compilation. - Rely on fbcon being builtin when vgaswitcheroo is builtin. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7dd06ccb-7f8d-943b-bbc0-f4e58e041a23@linux.intel.com
| * vga_switcheroo: Depend upon fbcon being built-in, if enabledDaniel Vetter2019-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes linking fail when fbcon/fbdev is modular and vgaswitcheroo is enabled: x86_64-linux-gnu-ld: drivers/gpu/vga/vga_switcheroo.o: in function `vga_switchto_stage2': vga_switcheroo.c:(.text+0x997): undefined reference to `fbcon_remap_all' Unfortunately this means that in a default allmodconfig we will disable vgaswitcheroo. v2: I first tried to fix this with an EXPORT_SYMBOL, but vga_switcheroo is never a module, so this doesn't work. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <lkp@intel.com> Fixes: 1cd51b5d200d ("vgaswitcheroo: call fbcon_remap_all directly") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Lukas Wunner <lukas@wunner.de> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: linux-fbdev@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190624092153.23375-1-daniel.vetter@ffwll.ch
* | Merge branch 'topic/remove-fbcon-notifiers' into drm-misc-nextMaarten Lankhorst2019-06-191-8/+3
|\| | | | | | | | | | | | | | | | | | | | | | | | | topic/remove-fbcon-notifiers: - remove fbdev notifier usage for fbcon, as prep work to clean up the fbcon locking - assorted locking checks in vt/console code - assorted notifier and cleanups in fbdev and backlight code This is the pull request that was sent out, plus the compile fix for sh4 reported by kbuild. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
| * vgaswitcheroo: call fbcon_remap_all directlyDaniel Vetter2019-06-121-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While at it, clean up the interface a bit and push the console locking into fbcon.c. v2: Remove now outdated comment (Lukas). v3: Forgot to add static inline to the dummy function. Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-30-daniel.vetter@ffwll.ch
* | vga_switcheroo: no need to check return value of debugfs_create functionsGreg Kroah-Hartman2019-06-131-27/+7
|/ | | | | | | | | | | | | | | | | | | | | When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentry, remove the local variable and just recursively delete the whole directory when shutting down. Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190613114455.GA13119@kroah.com
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-212-0/+2
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'drm-misc-next-fixes-2019-03-13' of ↵Dave Airlie2019-03-141-0/+49
|\ | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next - qxl: Remove the conflicting framebuffers earlier - Split out some i915 code into the fb_helper to allow the above Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313192158.k3qssf733khsqodn@flea
| * drm: move i915_kick_out_vgacon to vgaarbGerd Hoffmann2019-03-071-0/+49
| | | | | | | | | | | | | | | | Also rename it to vga_remove_vgacon and add kerneldoc text. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190301092502.30948-2-kraxel@redhat.com
* | vga-switcheroo: make PCI dependency explicitSinan Kaya2019-01-151-0/+1
|/ | | | | | | | | | | This driver depends on the PCI infrastructure, but the dependency has not been explicitly called out. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Reviewed-by: Lukas Wunner <lukas@wunner.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie2018-11-191-7/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
| * vgaarb: Keep adding VGA device in queueAaron Ma2018-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | If failed to find the deivice owning the boot framebuffer, try to use the first VGA device instead of the last one. Usually the 1st device is integrated GPU who owns the boot framebuffer. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-2-git-send-email-aaron.ma@canonical.com
| * vgaarb: Add support for 64-bit frame buffer addressAaron Ma2018-10-231-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | EFI GOP uses 64-bit frame buffer address when some BIOS disabled CSM support. vgaarb only stores lfb_base, this will lead boot framebuffer to wrong device. Add ext_lfb_base support to use 64-bit fb address. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-1-git-send-email-aaron.ma@canonical.com
* | vga_switcheroo: Fix missing gpu_bound call at audio client registrationTakashi Iwai2018-11-051-0/+3
|/ | | | | | | | | | | | | | | | | | | The commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") added a new ops gpu_bound to be called when GPU gets bound. The patch overlooked, however, that vga_switcheroo_enable() is called only once at GPU is bound. When an audio client is registered after that point, it would miss the gpu_bound call. This leads to the unexpected lack of runtime PM in HD-audio side. For addressing that regression, just call gpu_bound callback manually at vga_switcheroo_register_audio_client() when the GPU was already bound. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201615 Fixes: 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") Cc: <stable@vger.kernel.org> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Enable runtime PM only for discrete GPUTakashi Iwai2018-09-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* vga_switcheroo: set audio client id according to bound GPU idJim Qu2018-07-171-11/+52
| | | | | | | | | | | | | | | | | | | | | | | | | On modern laptop, there are more and more platforms have two GPUs, and each of them maybe have audio codec for HDMP/DP output. For some dGPU which is no output, audio codec usually is disabled. In currect HDA audio driver, it will set all codec as VGA_SWITCHEROO_DIS, the audio which is binded to UMA will be suspended if user use debugfs to contorl power In HDA driver side, it is difficult to know which GPU the audio has binded to. So set the bound gpu pci dev to vga_switcheroo. if the audio client is not the third registration, audio id will set in vga_switcheroo enable function. if the audio client is the last registration when vga_switcheroo _ready() get true, we should get audio client id from bound GPU directly. Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* docs: Fix some broken referencesMauro Carvalho Chehab2018-06-152-2/+2
| | | | | | | | | | | | | | | | | | As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
* vga_switcheroo: Let HDA autosuspend on mux changeLukas Wunner2018-03-131-2/+6
| | | | | | | | | | | | | | | | | When switching the display on muxed machines, we currently force the HDA controller into runtime suspend on the previously used GPU and into runtime active state on the newly used GPU. That's unnecessary if the GPU uses driver power control, we can just let the audio device autosuspend or autoresume as it sees fit. Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/098ed883460eb4976a899eac6f5192fefc877c0f.1520068884.git.lukas@wunner.de
* vga_switcheroo: Use device link for HDA controllerLukas Wunner2018-03-131-107/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in 2013, runtime PM for GPUs with integrated HDA controller was introduced with commits 0d69704ae348 ("gpu/vga_switcheroo: add driver control power feature. (v3)") and 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)"). Briefly, the idea was that the HDA controller is forced on and off in unison with the GPU. The original code is mostly still in place even though it was never a 100% perfect solution: E.g. on access to the HDA controller, the GPU is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there are no provisions to keep it resumed until access to the HDA controller has ceased: The GPU autosuspends after 5 seconds, rendering the HDA controller inaccessible. Additionally, a kludge is required when hda_intel.c probes: It has to check whether the GPU is powered down (check_hdmi_disabled()) and defer probing if so. However in the meantime (in v4.10) the driver core has gained a feature called device links which promises to solve such issues in a clean way: It allows us to declare a dependency from the HDA controller (consumer) to the GPU (supplier). The PM core then automagically ensures that the GPU is runtime resumed as long as the HDA controller's ->probe hook is executed and whenever the HDA controller is accessed. By default, the HDA controller has a dependency on its parent, a PCIe Root Port. Adding a device link creates another dependency on its sibling: PCIe Root Port ^ ^ | | | | HDA ===> GPU The device link is not only used for runtime PM, it also guarantees that on system sleep, the HDA controller suspends before the GPU and resumes after the GPU, and on system shutdown the HDA controller's ->shutdown hook is executed before the one of the GPU. It is a complete solution. Using this functionality is as simple as calling device_link_add(), which results in a dmesg entry like this: pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 The code for the GPU-governed audio power management can thus be removed (except where it's still needed for legacy manual power control). The device link is added in a PCI quirk rather than in hda_intel.c. It is therefore legal for the GPU to runtime suspend to D3cold even if the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL is not enabled, for accesses to the HDA controller will cause the GPU to wake up regardless if they're occurring outside of hda_intel.c (think config space readout via sysfs). Contrary to the previous implementation, the HDA controller's power state is now self-governed, rather than GPU-governed, whereas the GPU's power state is no longer fully self-governed. (The HDA controller needs to runtime suspend before the GPU can.) It is thus crucial that runtime PM is always activated on the HDA controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which is the default), lest the GPU stays awake. This is achieved by setting the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME flag on the HDA controller. A side effect is that power consumption might be reduced if the GPU is in use but the HDA controller is not, because the HDA controller is now allowed to go to D3hot. Before, it was forced to stay in D0 as long as the GPU was in use. (There is no reduction in power consumption on my Nvidia GK107, but there might be on other chips.) The code paths for legacy manual power control are adjusted such that runtime PM is disabled during power off, thereby preventing the PM core from resuming the HDA controller. Note that the device link is not only added on vga_switcheroo capable systems, but for *any* GPU with integrated HDA controller. The idea is that the HDA controller streams audio via connectors located on the GPU, so the GPU needs to be on for the HDA controller to do anything useful. This commit implicitly fixes an unbalanced runtime PM ref upon unbind of hda_intel.c: On ->probe, a runtime PM ref was previously released under the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but on ->remove a runtime PM ref was only acquired under the first of those conditions. Thus, binding and unbinding the driver twice on a vga_switcheroo capable system caused the runtime PM refcount to drop below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag is now always set if use_vga_switcheroo is true. For more information on device links please refer to: https://www.kernel.org/doc/html/latest/driver-api/device_link.html Documentation/driver-api/device_link.rst Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/51bd38360ff502a8c42b1ebf4405ee1d3f27118d.1520068884.git.lukas@wunner.de
* vga_switcheroo: Deduplicate power state trackingLukas Wunner2018-03-131-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If DRM drivers use runtime PM, they currently notify vga_switcheroo whenever they ->runtime_suspend or ->runtime_resume to update vga_switcheroo's internal power state tracking. That's essentially a duplication of a functionality performed by the PM core as it already tracks the GPU's power state and vga_switcheroo can always query it. Introduce a new internal helper vga_switcheroo_pwr_state() which does just that if runtime PM is used, or falls back to vga_switcheroo's internal power state tracking if manual power control is used. Drop a redundant power state check in set_audio_state() while at it. This removes one of the two purposes of the notification mechanism implemented by vga_switcheroo_set_dynamic_switch(). The other one is power management of the audio device and we'll remove that next. Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/0aa49d735b988aa04524a8dc339582ace33f0f94.1520068884.git.lukas@wunner.de
* vga_switcheroo: Update PCI current_state on power changeLukas Wunner2018-03-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When cutting power to a GPU and its integrated HDA controller, their cached current_state should be updated to D3cold to reflect reality. We currently rely on the DRM and HDA drivers to do that, however: - The HDA driver updates the current_state in azx_vs_set_state(), which will no longer be called with driver power control once we migrate to device links. (It will still be called with manual power control.) - If the HDA device is not bound, its current_state remains at D0 even though the GPU driver may decide to go to D3cold. - The DRM drivers update the current_state using pci_set_power_state() which can't put the device into a deeper power state than D3hot if the GPU is not deemed power-manageable by the platform (even though it *is* power-manageable by some nonstandard means, such as a _DSM). Centralize updating the current_state of the GPU and HDA controller in vga_switcheroo's ->runtime_suspend hook to overcome these deficiencies. The GPU and HDA controller are two functions of the same PCI device (VGA class device on function 0 and audio device on function 1) and no other PCI devices reside on the same bus since this is a PCIe point-to-point link, so we can just walk the bus and update the current_state of all devices. On ->runtime_resume, the HDA controller is in D0uninitialized state. Resume to D0active and then let it autosuspend as it sees fit. Note that vga_switcheroo_init_domain_pm_ops() is not supposed to be called by hybrid graphics laptops which power down the GPU via its root port's _PR3 resources and consequently vga_switcheroo_runtime_suspend() is not used. On those laptops, the root port is power-manageable by the platform (instead of by a nonstandard means) and the current_state is therefore updated by the PCI core through the following call chain: pci_set_power_state() __pci_complete_power_transition() pci_bus_set_current_state() Resuming to D0active happens through: pci_set_power_state() __pci_start_power_transition() pci_wakeup_bus() Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/8416958482c8c42d6f311ea5c1e5a65ccf21f5db.1520068884.git.lukas@wunner.de
* vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2018-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* the rest of drivers/*: annotate ->poll() instancesAl Viro2017-11-281-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vgaarb: Factor out EFI and fallback default device selectionBjorn Helgaas2017-10-181-22/+35
| | | | | | | | | | | | | | | | | | | | | | The default VGA device is normally set in vga_arbiter_add_pci_device() when we call it for the first enabled device that can be accessed with the legacy VGA resources ([mem 0xa0000-0xbffff], etc.) That default device can be overridden by an EFI device that owns the boot framebuffer. As a fallback, we can also select a VGA device that can't be accessed via legacy VGA resources, or a VGA device that isn't even enabled. Factor out this EFI and fallback selection from vga_arb_device_init() into a separate vga_arb_select_default_device() function. This doesn't change any behavior, but it untangles the "bridge control possible" checking and messages from the default device selection. Tested-by: Zhou Wang <wangzhou1@hisilicon.com> # D05 Hisi Hip07, Hip08 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171013034729.14630.30419.stgit@bhelgaas-glaptop.roam.corp.google.com
* vgaarb: Select a default VGA device even if there's no legacy VGABjorn Helgaas2017-10-181-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter never selects it as the default, which means Xorg auto-detection doesn't work. VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g., [mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are not configurable by BARs. Consequently, multiple VGA devices can conflict with each other. The VGA arbiter avoids conflicts by ensuring that those legacy resources are only routed to one VGA device at a time. The arbiter identifies the "default VGA" device, i.e., a legacy VGA device that was used by boot firmware. It selects the first device that: - is of PCI_CLASS_DISPLAY_VGA, - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and - has PCI_BRIDGE_CTL_VGA set in all upstream bridges. Some systems don't have such a device. For example, if a host bridge doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any devices below it. Or, as on the HiSilicon D05, the VGA device may be behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the legacy VGA resources will never reach the device. This patch extends the arbiter so that if it doesn't find a device that meets all the above criteria, it selects the first device that: - is of PCI_CLASS_DISPLAY_VGA and - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled If it doesn't find even that, it selects the first device that: - is of class PCI_CLASS_DISPLAY_VGA. Such a device may not be able to use the legacy VGA resources, but most drivers can operate the device without those. Setting it as the default device means its "boot_vga" sysfs file will contain "1", which Xorg (via libpciaccess) uses to help select its default output device. This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in particular; see the link below). It also replaces the powerpc fixup_vga() quirk, albeit with slightly different semantics: the quirk selected the first VGA device we found, and overrode that selection with any enabled VGA device we found. If there were several enabled VGA devices, the *last* one we found would become the default. The code here instead selects the *first* enabled VGA device we find, and if none are enabled, the first VGA device we find. Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net Tested-by: Daniel Axtens <dja@axtens.net> # arm64, ppc64-qemu-tcg Tested-by: Zhou Wang <wangzhou1@hisilicon.com> # D05 Hisi Hip07, Hip08 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171013034721.14630.65913.stgit@bhelgaas-glaptop.roam.corp.google.com
* sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar2017-06-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge tag 'drm-misc-next-2017-03-06' of ↵Dave Airlie2017-03-071-13/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/git/drm-misc into drm-next First slice of drm-misc-next for 4.12: Core/subsystem-wide: - link status core patch from Manasi, for signalling link train fail to userspace. I also had the i915 patch in here, but that had a small buglet in our CI, so reverted. - more debugfs_remove removal from Noralf, almost there now (Noralf said he'll try to follow up with the stragglers). - drm todo moved into kerneldoc, for better visibility (see Documentation/gpu/todo.rst), lots of starter tasks in there. - devm_ of helpers + use it in sti (from Ben Gaignard, acked by Rob Herring) - extended framebuffer fbdev support (for fbdev flipping), and vblank wait ioctl fbdev support (Maxime Ripard) - misc small things all over, as usual - add vblank callbacks to drm_crtc_funcs, plus make lots of good use of this to simplify drivers (Shawn Guo) - new atomic iterator macros to unconfuse old vs. new state Small drivers: - vc4 improvements from Eric - vc4 kerneldocs (Eric)! - tons of improvements for dw-mipi-dsi in rockchip from John Keeping and Chris Zhong. - MAINTAINERS entries for drivers managed in drm-misc. It's not yet official, still an experiment, but definitely not complete fail and better to avoid confusion. We kinda screwed that up with drm-misc a bit when we started committers last year. - qxl atomic conversion (Gabriel Krisman) - bunch of virtual driver polish (qxl, virgl, ...) - misc tiny patches all over This is the first time we've done the same merge-window blackout for drm-misc as we've done for drm-intel for ages, hence why we have a _lot_ of stuff queued already. But it's still only half of drm-intel (room to grow!), and the drivers in drm-misc experiment seems to work at least insofar as that you also get lots of driver updates here alredy. * tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc: (141 commits) drm/vc4: Fix OOPSes from trying to cache a partially constructed BO. drm/vc4: Fulfill user BO creation requests from the kernel BO cache. Revert "drm/i915: Implement Link Rate fallback on Link training failure" drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC drm: Update drm_fbdev_cma_init documentation drm/rockchip/dsi: add dw-mipi power domain support drm/rockchip/dsi: fix insufficient bandwidth of some panel dt-bindings: add power domain node for dw-mipi-rockchip drm/rockchip/dsi: remove mode_valid function drm/rockchip/dsi: dw-mipi: correct the coding style drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi dt-bindings: add rk3399 support for dw-mipi-rockchip drm/rockchip: dw-mipi-dsi: add reset control drm/rockchip: dw-mipi-dsi: support non-burst modes drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded drm/rockchip: vop: test for P{H,V}SYNC drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC drm/rockchip: dw-mipi-dsi: use specific poll helper drm/rockchip: dw-mipi-dsi: improve PLL configuration drm/rockchip: dw-mipi-dsi: properly configure PHY timing ...
| * drivers:gpu: vga :vga_switcheroo.c : Fixed some coding style issuesJoan Jani2017-03-011-13/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed the following style issues drivers/gpu/vga/vga_switcheroo.c:98: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:99: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:102: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:103: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:129: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:135: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:217: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:218: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:308: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:340: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use * on subsequent lines drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Joan Jani <igiann@hotmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/HE1PR1001MB1148F38207BC31C860FAF06DC9560@HE1PR1001MB1148.EURPRD10.PROD.OUTLOOK.COM
* | sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2017-03-021-1/+1
|/ | | | | | | | | | | | | <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* vgaarb: use valid dev pointer in vgaarb_info()Arnd Bergmann2016-11-221-2/+1
| | | | | | | | | | | | | | | | We now pass the device to the debug messages, but on non-x86, this is an invalid pointer in vga_arb_device_init: drivers/gpu/vga/vgaarb.c: In function 'vga_arb_device_init': drivers/gpu/vga/vgaarb.c:1467:4: error: 'dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] This moves the initialization of the dev pointer outside of the architecture #ifdef. Fixes: a75d68f62106 ("vgaarb: Use dev_printk() when possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161122143445.1896558-1-arnd@arndb.de
* vgaarb: Downgrade userspace-triggerable messages to debugBjorn Helgaas2016-11-181-5/+5
| | | | | | | | | To avoid userspace-triggerable dmesg spam, downgrade messages in the sysfs write parsing code to debug level. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161118141158.32415.71438.stgit@bhelgaas-glaptop.roam.corp.google.com
* vgaarb: Use dev_printk() when possibleBjorn Helgaas2016-11-181-31/+35
| | | | | | | | | | | | | | | | | | | | | | | | Use dev_printk() when possible. This makes messages more consistent with other device-related messages and, in some cases, adds useful information. This changes messages like this: vgaarb: failed to allocate pci device vgaarb: setting as boot device: PCI:0000:01:00.0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: bridge control possible 0000:01:00.0 to this: pci 0000:01:00.0: vgaarb: failed to allocate VGA arbiter data pci 0000:01:00.0: vgaarb: setting as boot VGA device pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:01:00.0: vgaarb: bridge control possible No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161117174758.16810.67625.stgit@bhelgaas-glaptop.roam.corp.google.com
* drivers/gpu/vga: allocate vga_arb_write() buffer on stackDmitry Vyukov2016-10-171-11/+4
| | | | | | | | | | | | | | | | Size of kmalloc() in vga_arb_write() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Allocate the buffer on stack to avoid the WARNING. The string must be small (e.g "target PCI:domain:bus:dev.fn"). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: syzkaller@googlegroups.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476451342-146510-1-git-send-email-dvyukov@google.com
* vgaarbiter: rst-ifiy and polish kerneldocDaniel Vetter2016-08-161-2/+108
| | | | | | | | | | | | | | | | | | | | | | | Move the documentation into Documentation/gpu, link it up and pull in the kernel doc. No actual text changes except that I did polish the kerneldoc a bit, especially for vga_client_register(). v2: Remove some rst from vga-switcheroo.rst that I don't understand, but which seems to be the reason why the new vgaarbiter.rst sometimes drops out of the sidebar index. v3: Drop one level of headings and clarify the vgaarb one a bit. v4: Fix some typos (Sean). Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-20-git-send-email-daniel.vetter@ffwll.ch
* vga_switcheroo: Sphinxify docsLukas Wunner2016-07-121-14/+14
| | | | | | | | | | Fix up formatting glitches remaining after the automatic rst conversion. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/3a369602ae35fdbf5e4a12f7e172088c89fa27bb.1468225027.git.lukas@wunner.de
* vga_switcheroo: Support deferred probing of audio clientsLukas Wunner2016-05-311-8/+11
| | | | | | | | | | | | | | | | | | | | | | Daniel Vetter pointed out that vga_switcheroo_client_probe_defer() could be needed by audio clients as well. To avoid mistakes when someone adds conditions for these in the future, constrain the single existing condition to VGA clients by checking for PCI_BASE_CLASS_DISPLAY. This encompasses both PCI_CLASS_DISPLAY_VGA as well as PCI_CLASS_DISPLAY_3D, which is used by some Nvidia Optimus GPUs. Any future checks for audio clients should then be constrained to PCI_BASE_CLASS_MULTIMEDIA. v6: Spun out from commit introducing vga_switcheroo_client_probe_defer() to keep it a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/358d58490eb9dda5f270d844b0dce511a2a20828.1464685538.git.lukas@wunner.de
* vga_switcheroo: Add helper for deferred probingLukas Wunner2016-05-311-1/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7de011 ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de
* vga_switcheroo: Add support for switching only the DDCLukas Wunner2016-02-091-2/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 02:07:01 +0000