summaryrefslogtreecommitdiffstats
path: root/drivers/media/test-drivers/vimc
Commit message (Collapse)AuthorAgeFilesLines
* media: vimc: scaler: Use subdev active stateLaurent Pinchart2024-06-261-75/+49
| | | | | | | | | | | | | | | | | | | | | Store the active formats and crop rectangle in the subdevice active state. This simplifies implementation of the format and selection accessors, and allows using the v4l2_subdev_get_fmt() helper to implement the .get_fmt() operation. The active configuration that is used in the .process_frame() handler is still stored in the vimc_scaler_device structure. The driver could instead access the active state in the .process_frame() handler, but the required locking could interfere with the real time constraints of the frame processing. This data would be stored in registers in the .s_stream() handler for real hardware, storing it in dedicated storage thus mimics a real driver. To differentiate them from the rest of the device private data, move the corresponding fields to a sub-structure of vimc_scaler_device named hw. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: debayer: Use subdev active stateLaurent Pinchart2024-06-261-101/+85
| | | | | | | | | | | | | | | | | | | | | Store the active formats and crop rectangle in the subdevice active state. This simplifies implementation of the format and selection accessors, and allows using the v4l2_subdev_get_fmt() helper to implement the .get_fmt() operation. The active configuration that is used in the .process_frame() handler is still stored in the vimc_debayer_device structure. The driver could instead access the active state in the .process_frame() handler, but the required locking could interfere with the real time constraints of the frame processing. This data would be stored in registers in the .s_stream() handler for real hardware, storing it in dedicated storage thus mimics a real driver. To differentiate them from the rest of the device private data, move the corresponding fields to a sub-structure of vimc_debayer_device named hw. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: sensor: Use subdev active stateLaurent Pinchart2024-06-261-58/+50
| | | | | | | | | | | | | | | | | | | | | Store the active formats and crop rectangle in the subdevice active state. This simplifies implementation of the format and selection accessors, and allows using the v4l2_subdev_get_fmt() helper to implement the .get_fmt() operation. The active configuration that is used in the .process_frame() handler is still stored in the vimc_sensor_device structure. The driver could instead access the active state in the .process_frame() handler, but the required locking could interfere with the real time constraints of the frame processing. This data would be stored in registers in the .s_stream() handler for real hardware, storing it in dedicated storage thus mimics a real driver. To differentiate them from the rest of the device private data, move the corresponding fields to a sub-structure of vimc_sensor_device named hw. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: Initialize subdev active stateLaurent Pinchart2024-06-265-1/+26
| | | | | | | | | | | Finalize subdev initialization for all subdevs that provide a .init_state() operation. This creates an active state for all those subdevs, which subsequent patches will use to simplify the implementation of individual vimc entities. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: Centralize subdev internal_ops initializationLaurent Pinchart2024-06-266-10/+10
| | | | | | | | | | Initialize the subdev internal_ops field in the vimc_ent_sd_register() function. This handles the internal ops the same way as the subdev ops, and prepares for moving to the V4L2 subdev active state API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: scaler: Rename vic_sca_pad enum to vimc_scaler_padLaurent Pinchart2024-06-261-1/+1
| | | | | | | | | The vic_sca_pad enum's name has been shortened to the extreme for no good reason. Rename it to vimc_scaler_pad. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: Constify the ent_config arrayLaurent Pinchart2024-06-261-1/+1
| | | | | | | | | The ent_config array contains data that is never modified. Make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: Constify vimc_ent_type structuresLaurent Pinchart2024-06-266-11/+11
| | | | | | | | | | | The vimc_ent_type structure contains static pointers to functions, and no other information that need to be modified after initialization. Make them const to avoid the risk of arbitrary code execution following an overflow that would overwrite the structure's contents. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: Don't iterate over single padLaurent Pinchart2024-06-262-13/+6
| | | | | | | | | | | The .init_state() operations of the debayer and sensor entities iterate over the entity's pads. In practice, the iteration covers a single pad only. Access the pad directly and remove the loops. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: v4l2: Add mem2mem helpers for REMOVE_BUFS ioctlBenjamin Gaignard2024-03-251-0/+1
| | | | | | | | | Create v4l2-mem2mem helpers for VIDIOC_REMOVE_BUFS ioctl and make test drivers use it. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: test-drivers: Set REQBUFS minimum number of buffersBenjamin Gaignard2024-03-251-1/+1
| | | | | | | | | | | | | | | | | | Instead of using 'min_queued_buffers' field to specify the minimum number of buffers to be allocated when calling REQBUF use 'min_reqbufs_allocation' field which is dedicated to this purpose. Change the minimum requested buffers to 2 for vivid-meta-out and vivid-touch-cap drivers when creating the queues. That allows to remove code which prohibe to allocate only one buffer in their respective queue setup functions. While at it rename vivid_create_queue() parameter. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: videobuf2: core: Rename min_buffers_needed field in vb2_queueBenjamin Gaignard2023-12-131-1/+1
| | | | | | | | | | | | Rename min_buffers_needed into min_queued_buffers and update the documentation about it. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: Drop the change where min_queued_buffers + 1 buffers would be] [hverkuil: allocated. Now this patch only renames this field instead of making] [hverkuil: a functional change as well.] [hverkuil: Renamed 3 remaining min_buffers_needed occurrences.]
* media: v4l2-subdev: Rename .init_cfg() operation to .init_state()Laurent Pinchart2023-12-043-9/+24
| | | | | | | | | | | | | | | | | | | | | | | | | The subdev .init_cfg() operation is affected by two issues: - It has long been extended to initialize a whole v4l2_subdev_state instead of just a v4l2_subdev_pad_config, but its name has stuck around. - Despite operating on a whole subdev state and not being directly exposed to the subdev users (either in-kernel or through the userspace API), .init_cfg() is categorized as a subdev pad operation. This participates in making the subdev API confusing for new developers. Fix it by renaming the operation to .init_state(), and make it a subdev internal operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415 Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> [Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: v4l: subdev: Switch to stream-aware state functionsSakari Ailus2023-11-233-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: Zero-initialize all structures passed to subdev pad operationsLaurent Pinchart2023-04-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several drivers call subdev pad operations, passing structures that are not fully zeroed. While the drivers initialize the fields they care about explicitly, this results in reserved fields having uninitialized values. Future kernel API changes that make use of those fields thus risk breaking proper driver operation in ways that could be hard to detect. To avoid this, make the code more robust by zero-initializing all the structures passed to subdev pad operation. Maintain a consistent coding style by preferring designated initializers (which zero-initialize all the fields that are not specified) over memset() where possible, and make variable declarations local to inner scopes where applicable. One notable exception to this rule is in the ipu3 driver, where a memset() is needed as the structure is not a local variable but a function parameter provided by the caller. Not all fields of those structures can be initialized when declaring the variables, as the values for those fields are computed later in the code. Initialize the 'which' field in all cases, and other fields when the variable declaration is so close to the v4l2_subdev_call() call that it keeps all the context easily visible when reading the code, to avoid hindering readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> # For vimc Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # For drivers/staging/media/imx/ Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc-core: Convert to platform remove callback returning voidUwe Kleine-König2023-04-111-4/+2
| | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: vimc: Fix wrong function called when vimc_init() failsChen Zhongjin2022-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | In vimc_init(), when platform_driver_register(&vimc_pdrv) fails, platform_driver_unregister(&vimc_pdrv) is wrongly called rather than platform_device_unregister(&vimc_pdev), which causes kernel warning: Unexpected driver unregister! WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0 RIP: 0010:driver_unregister+0x8f/0xb0 Call Trace: <TASK> vimc_init+0x7d/0x1000 [vimc] do_one_initcall+0xd0/0x4e0 do_init_module+0x1cf/0x6b0 load_module+0x65c2/0x7820 Fixes: 4a29b7090749 ("[media] vimc: Subdevices as modules") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: drivers: use video device pipeline start/stopTomi Valkeinen2022-09-241-4/+3
| | | | | | | | | | Convert the media drivers to use video device based pipeline start/stop where possible. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: vimc: wrong pointer is used with PTR_ERRHans Verkuil2022-07-271-1/+1
| | | | | | | | | | Fix smatch warning: drivers/media/test-drivers/vimc/vimc-core.c:214 vimc_create_links() warn: passing a valid pointer to 'PTR_ERR' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: mc-entity: Rename media_entity_remote_pad() to ↵Laurent Pinchart2022-07-171-1/+1
| | | | | | | | | | | | | media_pad_remote_pad_first() The media_entity_remote_pad() is misnamed, as it operates on a pad and not an entity. Rename it to media_pad_remote_pad_first() to clarify its behaviour. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: vimc: use data link entities enum to index the ent_config arrayDaniel Oakley2022-07-151-11/+11
| | | | | | | | | | | | | | Future additions to the ent_config[] could break the association between the index of the struct vimc_ent_config entries in the ent_config[] array, and the index defined by the enum proposed in the previous patch. Using designated initializers solves this by linking the 2 together clearly in code and prevents the array not reflecting the enum. There is no functional change intended. Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: vimc: enumerate data link entities for clarityDaniel Oakley2022-07-151-8/+28
| | | | | | | | | | | | The data_links array was hard to read and understand. By implementing enumerated vimc data link entities, clarity has been improved when defining data_links. This therefore should help new programmers to understand the codebase better. There is no functional change intended. Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: vimc: expand the names of vimc entity typesDaniel Oakley2022-07-157-648/+652
| | | | | | | | | | | | When introducing the lens controller, it became apparent that the vimc entity type names were hard to understand, e.g. vimc_len_type refers to the lens. The names of the vimc entity types have been expanded to make the code easier to understand. There is no functional change intended. Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: vimc: add ancillary lensYunke Cao2022-07-154-21/+170
| | | | | | | | | | | | | | | | | | | | | | | | Add lens to vimc driver and link them with sensors using ancillary links. Provides an example of ancillary link usage.The lens supports FOCUS_ABSOLUTE control. Test example: With default vimc topology > media-ctl -p Media controller API version 5.18.0 ... - entity 28: Lens A (0 pad, 0 link) type V4L2 subdev subtype Lens flags 0 device node name /dev/v4l-subdev6 - entity 29: Lens B (0 pad, 0 link) type V4L2 subdev subtype Lens flags 0 device node name /dev/v4l-subdev7 > v4l2-ctl -d /dev/v4l-subdev7 -C focus_absolute focus_absolute: 0 Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Yunke Cao <yunkec@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: Kconfig: cleanup VIDEO_DEV dependenciesMauro Carvalho Chehab2022-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | media Kconfig has two entries associated to V4L API: VIDEO_DEV and VIDEO_V4L2. On Kernel 2.6.x, there were two V4L APIs, each one with its own flag. VIDEO_DEV were meant to: 1) enable Video4Linux and make its Kconfig options to appear; 2) it makes the Kernel build the V4L core. while VIDEO_V4L2 where used to distinguish between drivers that implement the newer API and drivers that implemented the former one. With time, such meaning changed, specially after the removal of all V4L version 1 drivers. At the current implementation, VIDEO_DEV only does (1): it enables the media options related to V4L, that now has: menu "Video4Linux options" visible if VIDEO_DEV source "drivers/media/v4l2-core/Kconfig" endmenu but it doesn't affect anymore the V4L core drivers. The rationale is that the V4L2 core has a "soft" dependency at the I2C bus, and now requires to select a number of other Kconfig options: config VIDEO_V4L2 tristate depends on (I2C || I2C=n) && VIDEO_DEV select RATIONAL select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE default (I2C || I2C=n) && VIDEO_DEV In the past, merging them would be tricky, but it seems that it is now possible to merge those symbols, in order to simplify V4L dependencies. Let's keep VIDEO_DEV, as this one is used on some make *defconfig configurations. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: vimc: Add support for contiguous DMA buffersLaurent Pinchart2022-02-164-2/+25
| | | | | | | | | | | | | | | | | | The vimc driver is used for testing purpose, and some test use cases involve sharing buffers with a consumer device. Consumers often require DMA contiguous memory, which vimc doesn't currently support. This leads in the best case to usage of bounce buffers, which is very slow, and in the worst case in a complete failure. Add support for the dma-contig allocator in vimc to support those use cases properly. The allocator is selected through a new "allocator" module parameter, which defaults to vmalloc. [hverkuil: add missing 'select VIDEOBUF2_DMA_CONFIG' to Kconfig] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: vimc: Enable set resolution at the scaler src padPedro Terra2021-09-301-222/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the scaler subdevice to accept setting the resolution of the source pad (previously the source resolution would always be 3 times the sink for both dimensions). Now any resolution can be set at src (even smaller ones) and the sink video will be scaled to match it. Test example: With the vimc module up (using the default vimc topology) media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]' media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]' media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]' v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \ --stream-to=test.raw The result will be a cropped stream that can be checked with the command ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \ -video_size "300x700" test.raw Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by: Pedro Terra <pedro@terraco.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: v4l2-subdev: add subdev-wide state structTomi Valkeinen2021-06-173-36/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: media/test-drivers: use vb2_video_unregister_device()Hans Verkuil2020-08-281-5/+2
| | | | | | | | | | | Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: vimc: Add a control to display info on test imageKaaira Gupta2020-07-194-0/+84
| | | | | | | | | | | | Add a control in VIMC to display information such as the correct order of colors for a given test pattern, counter, brightness, hue, saturation, contrast, width and height at sensor over test image. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Acked-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: vimc: Make use of V4L2_CAP_IO_MCNiklas Söderlund2020-05-061-2/+12
| | | | | | | | | | | Set the V4L2_CAP_IO_MC capability flag to report this vimc inputs/outputs are controlled by the media graph. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: vimc: deb: Add support for {RGB,BGR,GBR}888 bus formats on source padNícolas F. R. A. Prado2020-05-051-17/+54
| | | | | | | | | | | | Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on the source pad of debayer subdevices. Acked-by: Helen Koike <helen.koike@collabora.com> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: vimc: Add missing {RGB,BGR,GBR}888 media bus codesNícolas F. R. A. Prado2020-05-052-3/+15
| | | | | | | | | | | | | Add missing RGB888_*, BGR888_* and GBR888_* media bus codes in the vimc_pix_map_list. Since there is no GBR24 pixelformat, use the RGB24 pixelformat for MEDIA_BUS_FMT_GBR888_1X24. Acked-by: Helen Koike <helen.koike@collabora.com> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: vimc: Support multiple media bus codes for each pixelformatNícolas F. R. A. Prado2020-05-054-32/+68
| | | | | | | | | | | | Change vimc_pix_map_list to allow multiple media bus codes to map to the same pixelformat, making it possible to add media bus codes for which there are no pixelformat. Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix sparse warning: const u32 -> u32] Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: vimc: cap: Report a colorspaceNiklas Söderlund2020-04-294-4/+7
| | | | | | | | | | | | | | | The colorspace reported by a video nodes should not be V4L2_COLORSPACE_DEFAULT. Instead a default colorspace should be picked by the driver if V4L2_COLORSPACE_DEFAULT is given by userspace to {G,S,TRY}_FMT. The colorspace V4L2_COLORSPACE_SRGB is arbitrary chosen as the vimc default format to report as it's used for most webcams. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: media/test_drivers: rename to test-driversHans Verkuil2020-04-1611-0/+3234
We never use _ in directory names in the media subsystem, so rename to test-drivers instead for consistency. Also update MAINTAINERS with the new path. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-25 03:16:35 +0000