summaryrefslogtreecommitdiffstats
path: root/drivers/nvme/host/fabrics.c
Commit message (Collapse)AuthorAgeFilesLines
* nvme-fabrics: use reserved tag for reg read/write commandChunguang Xu2024-05-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | In some scenarios, if too many commands are issued by nvme command in the same time by user tasks, this may exhaust all tags of admin_q. If a reset (nvme reset or IO timeout) occurs before these commands finish, reconnect routine may fail to update nvme regs due to insufficient tags, which will cause kernel hang forever. In order to workaround this issue, maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved tags. This maybe safe for nvmf: 1. For the disable ctrl path, we will not issue connect command 2. For the enable ctrl / fw activate path, since connect and reg_xx() are called serially. So the reserved tags may still be enough while reg_xx() use reserved tags. Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme: do not retry authentication failuresDaniel Wagner2024-05-011-0/+6
| | | | | | | | When the key is invalid there is no point in retrying. Because the auth code returns kernel error codes only, we can't test on the DNR bit. Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-fabrics: short-circuit reconnect retriesHannes Reinecke2024-05-011-1/+13
| | | | | | | | | | | | | Returning a nvme status from nvme_tcp_setup_ctrl() indicates that the association was established and we have received a status from the controller; consequently we should honour the DNR bit. If not any future reconnect attempts will just return the same error, so we can short-circuit the reconnect attempts and fail the connection directly. Signed-off-by: Hannes Reinecke <hare@suse.de> [dwagner: - extended nvme_should_reconnect] Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme: return kernel error codes for admin queue connectHannes Reinecke2024-05-011-18/+13
| | | | | | | | | | | | nvmf_connect_admin_queue returns NVMe error status codes and kernel error codes. This mixes the different domains which makes maintainability difficult. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linuxLinus Torvalds2024-03-111-10/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block updates from Jens Axboe: - MD pull requests via Song: - Cleanup redundant checks (Yu Kuai) - Remove deprecated headers (Marc Zyngier, Song Liu) - Concurrency fixes (Li Lingfeng) - Memory leak fix (Li Nan) - Refactor raid1 read_balance (Yu Kuai, Paul Luse) - Clean up and fix for md_ioctl (Li Nan) - Other small fixes (Gui-Dong Han, Heming Zhao) - MD atomic limits (Christoph) - NVMe pull request via Keith: - RDMA target enhancements (Max) - Fabrics fixes (Max, Guixin, Hannes) - Atomic queue_limits usage (Christoph) - Const use for class_register (Ricardo) - Identification error handling fixes (Shin'ichiro, Keith) - Improvement and cleanup for cached request handling (Christoph) - Moving towards atomic queue limits. Core changes and driver bits so far (Christoph) - Fix UAF issues in aoeblk (Chun-Yi) - Zoned fix and cleanups (Damien) - s390 dasd cleanups and fixes (Jan, Miroslav) - Block issue timestamp caching (me) - noio scope guarding for zoned IO (Johannes) - block/nvme PI improvements (Kanchan) - Ability to terminate long running discard loop (Keith) - bdev revalidation fix (Li) - Get rid of old nr_queues hack for kdump kernels (Ming) - Support for async deletion of ublk (Ming) - Improve IRQ bio recycling (Pavel) - Factor in CPU capacity for remote vs local completion (Qais) - Add shared_tags configfs entry for null_blk (Shin'ichiro - Fix for a regression in page refcounts introduced by the folio unification (Tony) - Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid, Ricardo, Roman, Tang, Uwe) * tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits) block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC block/swim: Convert to platform remove callback returning void cdrom: gdrom: Convert to platform remove callback returning void block: remove disk_stack_limits md: remove mddev->queue md: don't initialize queue limits md/raid10: use the atomic queue limit update APIs md/raid5: use the atomic queue limit update APIs md/raid1: use the atomic queue limit update APIs md/raid0: use the atomic queue limit update APIs md: add queue limit helpers md: add a mddev_is_dm helper md: add a mddev_add_trace_msg helper md: add a mddev_trace_remap helper bcache: move calculation of stripe_size and io_opt into bcache_device_init virtio_blk: Do not use disk_set_max_open/active_zones() aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts block: move capacity validation to blkpg_do_ioctl() block: prevent division by zero in blk_rq_stat_sum() drbd: atomically update queue limits in drbd_reconsider_queue_parameters ...
| * nvme: fabrics: make nvmf_class constantRicardo B. Marliere2024-03-051-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the nvmf_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
| * nvme-fabrics: typo in nvmf_parse_key()Hannes Reinecke2024-03-041-1/+1
| | | | | | | | | | | | | | | | Of course we should use the key if there is no error ... Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
* | nvme-fabrics: fix I/O connect error handlingChaitanya Kulkarni2024-02-131-0/+1
|/ | | | | | | | | | | | | In nvmf_connect_io_queue(), if connect I/O command fails, we log the error and continue for authentication. This overrides error captured from __nvme_submit_sync_cmd(), causing wrong return value. Add goto out_free_data after logging connect error to fix the issue. Fixes: f50fff73d620c ("nvme: implement In-Band authentication") Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme: change __nvme_submit_sync_cmd() calling conventionsHannes Reinecke2024-01-311-7/+11
| | | | | | | | | | | | Combine the two arguments 'flags' and 'at_head' from __nvme_submit_sync_cmd() into a single 'flags' argument and use function-specific values to indicate what should be set within the function. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme: add module description to stop warningsChaitanya Kulkarni2024-01-241-0/+1
| | | | | | | | | | | | | | | | Add MODULE_DESCRIPTION() in order to remove warnings & get clean build:- WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-fabrics.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-rdma.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-fc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-tcp.o Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* Merge tag 'hardening-v6.8-rc1' of ↵Linus Torvalds2024-01-101-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - Introduce the param_unknown_fn type and other clean ups (Andy Shevchenko) - Various __counted_by annotations (Christophe JAILLET, Gustavo A. R. Silva, Kees Cook) - Add KFENCE test to LKDTM (Stephen Boyd) - Various strncpy() refactorings (Justin Stitt) - Fix qnx4 to avoid writing into the smaller of two overlapping buffers - Various strlcpy() refactorings * tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: qnx4: Use get_directory_fname() in qnx4_match() qnx4: Extract dir entry filename processing into helper atags_proc: Add __counted_by for struct buffer and use struct_size() tracing/uprobe: Replace strlcpy() with strscpy() params: Fix multi-line comment style params: Sort headers params: Use size_add() for kmalloc() params: Do not go over the limit when getting the string length params: Introduce the param_unknown_fn type lkdtm: Add kfence read after free crash type nvme-fc: replace deprecated strncpy with strscpy nvdimm/btt: replace deprecated strncpy with strscpy nvme-fabrics: replace deprecated strncpy with strscpy drm/modes: replace deprecated strncpy with strscpy_pad afs: Add __counted_by for struct afs_acl and use struct_size() VMCI: Annotate struct vmci_handle_arr with __counted_by i40e: Annotate struct i40e_qvlist_info with __counted_by HID: uhid: replace deprecated strncpy with strscpy samples: Replace strlcpy() with strscpy() SUNRPC: Replace strlcpy() with strscpy()
| * nvme-fabrics: replace deprecated strncpy with strscpyJustin Stitt2023-12-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect both data->subsysnqn and data->hostnqn to be NUL-terminated based on their usage with format specifier ("%s"): fabrics.c: 322: dev_err(ctrl->device, 323: "%s, subsysnqn \"%s\"\n", 324: inv_data, data->subsysnqn); ... 349: dev_err(ctrl->device, 350: "Connect for subsystem %s is not allowed, hostnqn: %s\n", 351: data->subsysnqn, data->hostnqn); Moreover, there's no need to NUL-pad since `data` is zero-allocated already in fabrics.c: 383: data = kzalloc(sizeof(*data), GFP_KERNEL); ... therefore any further NUL-padding is rendered useless. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. I opted not to switch NVMF_NQN_SIZE to sizeof(data->xyz) because the size is defined as: | /* NQN names in commands fields specified one size */ | #define NVMF_NQN_FIELD_LEN 256 ... while NVMF_NQN_SIZE is defined as: | /* However the max length of a qualified name is another size */ | #define NVMF_NQN_SIZE 223 Since 223 seems pretty magic, I'm not going to touch it. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231018-strncpy-drivers-nvme-host-fabrics-c-v1-1-b6677df40a35@google.com Signed-off-by: Kees Cook <keescook@chromium.org>
* | nvme: blank out authentication fabrics options if not configuredHannes Reinecke2023-11-201-0/+2
|/ | | | | | | | | | | | | | If the config option NVME_HOST_AUTH is not selected we should not accept the corresponding fabrics options. This allows userspace to detect if NVMe authentication has been enabled for the kernel. Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: f50fff73d620 ("nvme: implement In-Band authentication") Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-fabrics: parse options 'keyring' and 'tls_key'Hannes Reinecke2023-10-111-1/+54
| | | | | | | | | Parse the fabrics options 'keyring' and 'tls_key' and store the referenced keys in the options structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-tcp: enable TLS handshake upcallHannes Reinecke2023-10-111-0/+12
| | | | | | | | | | Add a fabrics option 'tls' and start the TLS handshake upcall with the default PSK. When TLS is started the PSK key serial number is displayed in the sysfs attribute 'tls_key' Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-fabrics: open code __nvmf_host_find()Chaitanya Kulkarni2023-06-121-48/+27
| | | | | | | | | | | | | | | | | | | | | | | | | There is no point in maintaining a separate funciton __nvmf_host_find() that has only one caller nvmf_host_add() especially when caller and callee both are small enough to merge. Due to this we are actually repeating the error handling code in both callee and caller for no reason that can be avoided, but instead we have to read both function to establish the correctness along with additional lockdep warning check due to involved locking. Just open code __nvmf_host_find() in nvme_host_alloc() with appropriate comment that removes repeated error checks in the callee/caller and lockdep check that is needed for the nvmf_hosts_mutex involvement, diffstats :- drivers/nvme/host/fabrics.c | 75 +++++++++++++------------------------ 1 file changed, 27 insertions(+), 48 deletions(-) Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-fabrics: error out to unlock the mutexChaitanya Kulkarni2023-06-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | | Currently, in the nvmf_host_add() function, if the nvmf_host_alloc() call failed to allocate memory for the host, the code would directly return -ENOMEM without unlocking the nvmf_hosts_mutex. This could lead to potential issues with mutex synchronization. Fix that error handling mechanism by jumping to the out_unlock label when nvmf_host_alloc() fails. This ensures that the mutex is unlocked before returning the error code. The updated code enhances avoids possible deadlocks. Fixes: f0cebf82004d ("nvme-fabrics: prevent overriding of existing host") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202306020909.MTUEBeIa-lkp@intel.com/ Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-fabrics: prevent overriding of existing hostMax Gurtovoy2023-06-121-27/+71
| | | | | | | | | | | | | | | | | | | When first connecting a target using the "default" host parameters, setting the hostid from the command line during a subsequent connection establishment would override the "default" hostid parameter. This would cause an existing connection that is already using the host definitions to lose its hostid. To address this issue, the code has been modified to allow only 1:1 mapping between hostnqn and hostid. This will maintain unambiguous host identification. Any non 1:1 mapping will be rejected during connection establishment. Tested-by: Noam Gottlieb <ngottlieb@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-fabrics: unify common code in admin and io queue connectMax Gurtovoy2023-06-121-31/+43
| | | | | | | | | | | | To simplify code maintenance, it is recommended to avoid duplicating code. Tested-by: Noam Gottlieb <ngottlieb@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
* nvme-fabrics: add queue setup helpersKeith Busch2023-06-121-0/+76
| | | | | | | | | tcp and rdma transports have lots of duplicate code setting up the different queue mappings. Add common helpers. Cc: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
* driver core: class: remove module * from class_create()Greg Kroah-Hartman2023-03-171-1/+1
| | | | | | | | | | | | The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvme-fabrics: clarify AUTHREQ result handlingHannes Reinecke2023-02-011-2/+17
| | | | | | | | | | | | | | The NVMe 2.0 spec defines the ATR and ASCR bits in the AUTHREQ connect response field to be mutually exclusive. So to clarify the handling here switch the AUTHREQ handling to use the bit definitions and check for both bits. And while we're at it, add a message to the user that secure concatenation is not supported (yet). Suggested-by: Mark Lehrer <mark.lehrer@wdc.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme: consider also host_iface when checking ip optionsDaniel Wagner2022-09-191-5/+18
| | | | | | | | | | | | | | It's perfectly fine to use the same traddr and trsvcid more than once as long we use different host interface. This is used in setups where the host has more than one interface but the target exposes only one traddr/trsvcid combination. Use the same acceptance rules for host_iface as we have for host_traddr. Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme: move from strlcpy with unused retval to strscpyWolfram Sang2022-09-191-1/+1
| | | | | | | | | | Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: Fix a typo in an error messageChristophe JAILLET2022-08-101-1/+1
| | | | | | | | | A 'c' is missing. s/fabris/fabrics/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: parse nvme connect Linux error codesAmit Engel2022-08-101-0/+6
| | | | | | | This fixes the assumption that errval is an unsigned nvme error Signed-off-by: Amit Engel <amit.engel@dell.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme: implement In-Band authenticationHannes Reinecke2022-08-021-3/+77
| | | | | | | | | | | | | | | | | Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006. This patch adds two new fabric options 'dhchap_secret' to specify the pre-shared key (in ASCII respresentation according to NVMe 2.0 section 8.13.5.8 'Secret representation') and 'dhchap_ctrl_secret' to specify the pre-shared controller key for bi-directional authentication of both the host and the controller. Re-authentication can be triggered by writing the PSK into the new controller sysfs attribute 'dhchap_secret' or 'dhchap_ctrl_secret'. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> [axboe: fold in clang build fix] Signed-off-by: Jens Axboe <axboe@kernel.dk>
* nvme-fabrics: decode 'authentication required' connect errorHannes Reinecke2022-08-021-0/+4
| | | | | | | | | | | | The 'connect' command might fail with NVME_SC_AUTH_REQUIRED, so we should be decoding this error, too. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* nvme: remove unused timeout parameterChaitanya Kulkarni2022-08-021-5/+5
| | | | | | | | | | | | | | | | | | | | | | | The function __nvme_submit_sync_cmd() has following list of callers that sets the timeout value to 0 :- Callers | Timeout value ------------------------------------------------ nvme_submit_sync_cmd() | 0 nvme_features() | 0 nvme_sec_submit() | 0 nvmf_reg_read32() | 0 nvmf_reg_read64() | 0 nvmf_reg_write32() | 0 nvmf_connect_admin_queue() | 0 nvmf_connect_io_queue() | 0 Remove the timeout function parameter from __nvme_submit_sync_cmd() and adjust the rest of code accordingly. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* nvme-fabrics: remove unnecessary braces for caseChaitanya Kulkarni2022-02-281-1/+1
| | | | | | | | | Braces are not required for enum value NVME_SC_CONNECT_INVALID_PARAM when used on the switch-case statement, remove the braces. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: use consistent zeroout patternChaitanya Kulkarni2022-02-281-2/+1
| | | | | | | | | | | Remove zeroout memeset call & zeroout local variable cmd at the time of declaration in nvmf_ref_read32() similar to what we have done in nvmf_reg_read64(), nvmf_reg_write32(), nvmf_connect_admin_queue(), and nvmf_connect_io_queue(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: use unsigned int typeChaitanya Kulkarni2022-02-281-1/+1
| | | | | | | | Loop variable i will never have a negative value, so use unsigned int type instaed of int. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: use unsigned int typeChaitanya Kulkarni2022-02-281-1/+1
| | | | | | | | Loop variable i will never have a negative value, so use unsigned int type instaed of int. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove the unneeded ret variable in nvmf_dev_showChangcheng Deng2022-01-271-2/+1
| | | | | | | | Remove unneeded variable and directly return 0. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabricsHannes Reinecke2021-12-231-1/+21
| | | | | | | | | | | | | | | Currently applications have a hard time figuring out which nvme-over-fabrics arguments are supported for any given kernel; the ioctl will return an error code on failure, and the application has to guess whether this was due to an invalid argument or due to a connection or controller error. With this patch applications can read a list of supported arguments by simply reading from /dev/nvme-fabrics, allowing them to validate the connection string. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: ignore invalid fast_io_fail_tmo valuesMaurizio Lombardi2021-11-231-0/+3
| | | | | | | | | | Valid fast_io_fail_tmo values are integers >= 0 or -1 (disabled). Prevent userspace from setting arbitrary negative values. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme: Add connect option 'discovery'Hannes Reinecke2021-10-201-1/+5
| | | | | | | | | | | | | Add a connect option 'discovery' to specify that the connection should be made to a discovery controller, not a normal I/O controller. With discovery controllers supporting unique subsystem NQNs we cannot easily distinguish by the subsystem NQN if this should be a discovery connection, but we need this information to blank out options not supported by discovery controllers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove superfluous nvmf_host_put in nvmf_parse_optionsHou Pu2021-08-161-1/+0
| | | | | | | | | Opts->host is NULL there. It is checked just before. So remove nvmf_host_put. It is introduced by commit 59a2f3f00fd7 ("nvme: fix potential memory leak in option parsing"). Signed-off-by: Hou Pu <houpu.main@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme: use blk_execute_rq() for passthrough commandsKeith Busch2021-06-301-7/+6
| | | | | | | | | | | The generic blk_execute_rq() knows how to handle polled completions. Use that instead of implementing an nvme specific handler. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210610214437.641245-3-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* nvme-fabrics: remove memset in connect io qChaitanya Kulkarni2021-06-171-2/+1
| | | | | | | | Declare and initialize structure variable to the zero values so that we can get rid of the zeroout memset call. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove memset in connect admin qChaitanya Kulkarni2021-06-171-2/+1
| | | | | | | | Declare and initialize structure variable to the zero values so that we can get rid of the zeroout memset call. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove memset in nvmf_reg_write32()Chaitanya Kulkarni2021-06-171-2/+1
| | | | | | | | Declare and initialize structure variable to the zero values so that we can get rid of the zeroout memset call. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove memset in nvmf_reg_read64()Chaitanya Kulkarni2021-06-171-2/+1
| | | | | | | | Declare and initialize structure variable to the zero values so that we can get rid of the zeroout memset call. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove extra bracesChaitanya Kulkarni2021-06-031-1/+1
| | | | | | | | | No need to use the braces around ~ operator. No functionality change in this patch. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove an extra commentChaitanya Kulkarni2021-06-031-1/+1
| | | | | | | | | | Remove the comment at the end of the switch that is not needed as function is small enough. No functionality change in this patch. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: remove extra new lines in the switchChaitanya Kulkarni2021-06-031-5/+4
| | | | | | | | | | Remove the extra lines in the switch block that is not common practice in the kernel code. No functionality change in this patch. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-fabrics: fix the kerneldco comment for nvmf_log_connect_error()Chaitanya Kulkarni2021-06-031-13/+9
| | | | | | | | | Fix the comment style that matches existing code. No functionality change in this patch. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme-tcp: allow selecting the network interface for connectionsMartin Belanger2021-06-031-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In our application, we need a way to force TCP connections to go out a specific IP interface instead of letting Linux select the interface based on the routing tables. Add the 'host-iface' option to allow specifying the interface to use. When the option host-iface is specified, the driver uses the specified interface to set the option SO_BINDTODEVICE on the TCP socket before connecting. This new option is needed in addtion to the existing host-traddr for the following reasons: Specifying an IP interface by its associated IP address is less intuitive than specifying the actual interface name and, in some cases, simply doesn't work. That's because the association between interfaces and IP addresses is not predictable. IP addresses can be changed or can change by themselves over time (e.g. DHCP). Interface names are predictable [1] and will persist over time. Consider the following configuration. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 100.0.0.100/24 scope global lo valid_lft forever preferred_lft forever 2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ... link/ether 08:00:27:21:65:ec brd ff:ff:ff:ff:ff:ff inet 100.0.0.100/24 scope global enp0s3 valid_lft forever preferred_lft forever 3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ... link/ether 08:00:27:4f:95:5c brd ff:ff:ff:ff:ff:ff inet 100.0.0.100/24 scope global enp0s8 valid_lft forever preferred_lft forever The above is a VM that I configured with the same IP address (100.0.0.100) on all interfaces. Doing a reverse lookup to identify the unique interface associated with 100.0.0.100 does not work here. And this is why the option host_iface is required. I understand that the above config does not represent a standard host system, but I'm using this to prove a point: "We can never know how users will configure their systems". By te way, The above configuration is perfectly fine by Linux. The current TCP implementation for host_traddr performs a bind()-before-connect(). This is a common construct to set the source IP address on a TCP socket before connecting. This has no effect on how Linux selects the interface for the connection. That's because Linux uses the Weak End System model as described in RFC1122 [2]. On the other hand, setting the Source IP Address has benefits and should be supported by linux-nvme. In fact, setting the Source IP Address is a mandatory FedGov requirement (e.g. connection to a RADIUS/TACACS+ server). Consider the following configuration. $ ip addr list dev enp0s8 3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ... link/ether 08:00:27:4f:95:5c brd ff:ff:ff:ff:ff:ff inet 192.168.56.101/24 brd 192.168.56.255 scope global enp0s8 valid_lft 426sec preferred_lft 426sec inet 192.168.56.102/24 scope global secondary enp0s8 valid_lft forever preferred_lft forever inet 192.168.56.103/24 scope global secondary enp0s8 valid_lft forever preferred_lft forever inet 192.168.56.104/24 scope global secondary enp0s8 valid_lft forever preferred_lft forever Here we can see that several addresses are associated with interface enp0s8. By default, Linux always selects the default IP address, 192.168.56.101, as the source address when connecting over interface enp0s8. Some users, however, want the ability to specify a different source address (e.g., 192.168.56.102, 192.168.56.103, ...). The option host_traddr can be used as-is to perform this function. In conclusion, I believe that we need 2 options for TCP connections. One that can be used to specify an interface (host-iface). And one that can be used to set the source address (host-traddr). Users should be allowed to use one or the other, or both, or none. Of course, the documentation for host_traddr will need some clarification. It should state that when used for TCP connection, this option only sets the source address. And the documentation for host_iface should say that this option is only available for TCP connections. References: [1] https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ [2] https://tools.ietf.org/html/rfc1122 Tested both IPv4 and IPv6 connections. Signed-off-by: Martin Belanger <martin.belanger@dell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme: move the fabrics queue ready check routines to coreTao Chiu2021-05-041-57/+0
| | | | | | | | | | | | | | | | | | | | queue_rq() in pci only checks if the dispatched queue (nvmeq) is ready, e.g. not being suspended. Since nvme_alloc_admin_tags() in reset flow restarts the admin queue, users are able to submit admin commands to a controller before reset_work() completes. Commands submitted under this condition may interfere with commands that performs identify, IO queue setup in reset_work(), and may result in a hang described in the following patch. As seen in the fabrics, user commands are prevented from being executed under inproper controller states. We may reuse this logic to maintain a clear admin queue during reset_work(). Signed-off-by: Tao Chiu <taochiu@synology.com> Signed-off-by: Cody Wong <codywong@synology.com> Reviewed-by: Leon Chien <leonchien@synology.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
* nvme: sanitize KATO settingHannes Reinecke2021-04-211-3/+1
| | | | | | | | | | | | | | According to the NVMe base spec the KATO commands should be sent at half of the KATO interval, to properly account for round-trip times. As we now will only ever send one KATO command per connection we can easily use the recommended values. This also fixes a potential issue where the request timeout for the KATO command does not match the value in the connect command, which might be causing spurious connection drops from the target. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-20 14:15:39 +0000