summaryrefslogtreecommitdiffstats
path: root/drivers/pci
Commit message (Collapse)AuthorAgeFilesLines
* PCI/ASPM: Always set link->downstream to avoid NULL dereference on removeYinghai Lu2017-03-071-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We call pcie_aspm_exit_link_state() when we remove a device. If the device is the last PCIe function to be removed below a bridge and the bridge has an ASPM link_state struct, we disable ASPM on the link. Disabling ASPM requires link->downstream (used in pcie_config_aspm_link()). We previously set link->downstream in pcie_aspm_cap_init(), but only if the device was not blacklisted. Removing the blacklisted device caused a NULL pointer dereference in the pcie_aspm_exit_link_state() -> pcie_config_aspm_link() path: # echo 1 > /sys/bus/pci/devices/0000\:0b\:00.0/remove ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: pcie_config_aspm_link+0x5d/0x2b0 Call Trace: pcie_aspm_exit_link_state+0x75/0x130 pci_stop_bus_device+0xa4/0xb0 pci_stop_and_remove_bus_device_locked+0x1a/0x30 remove_store+0x50/0x70 dev_attr_store+0x18/0x30 sysfs_kf_write+0x44/0x60 kernfs_fop_write+0x10e/0x190 __vfs_write+0x28/0x110 ? rcu_read_lock_sched_held+0x5d/0x80 ? rcu_sync_lockdep_assert+0x2c/0x60 ? __sb_start_write+0x173/0x1a0 ? vfs_write+0xb3/0x180 vfs_write+0xc4/0x180 SyS_write+0x49/0xa0 do_syscall_64+0xa6/0x1c0 entry_SYSCALL64_slow_path+0x25/0x25 ---[ end trace bd187ee0267df5d9 ]--- To avoid this, set link->downstream in alloc_pcie_link_state(), so every pcie_link_state structure has a valid link->downstream pointer. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rajat Jain <rajatja@google.com> CC: stable@vger.kernel.org
* PCI: Prevent VPD access for QLogic ISP2722Ethan Zhao2017-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QLogic ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter has the VPD access issue too, while read the common pci-sysfs access interface shown as /sys/devices/pci0000:00/0000:00:03.2/0000:0b:00.0/vpd with simple 'cat' could cause system hang and panic: Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources: 1. Integrated Management Log (IML) 2. OA Syslog 3. OA Forward Progress Log 4. iLO Event Log CPU: 0 PID: 15070 Comm: udevadm Not tainted 4.1.12 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 0000000000000086 000000007f0cdf51 ffff880c4fa05d58 ffffffff817193de ffffffffa00b42d8 0000000000000075 ffff880c4fa05dd8 ffffffff81714072 0000000000000008 ffff880c4fa05de8 ffff880c4fa05d88 000000007f0cdf51 Call Trace: <NMI> [<ffffffff817193de>] dump_stack+0x63/0x81 [<ffffffff81714072>] panic+0xd0/0x20e [<ffffffffa00b390d>] hpwdt_pretimeout+0xdd/0xe0 [hpwdt] [<ffffffff81021fc9>] ? sched_clock+0x9/0x10 [<ffffffff8101c101>] nmi_handle+0x91/0x170 [<ffffffff8101c10c>] ? nmi_handle+0x9c/0x170 [<ffffffff8101c5fe>] io_check_error+0x1e/0xa0 [<ffffffff8101c719>] default_do_nmi+0x99/0x140 [<ffffffff8101c8b4>] do_nmi+0xf4/0x170 [<ffffffff817232c5>] end_repeat_nmi+0x1a/0x1e [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 <<EOE>> [<ffffffff815db4b3>] raw_pci_read+0x23/0x40 [<ffffffff815db4fc>] pci_read+0x2c/0x30 [<ffffffff8136f612>] pci_user_read_config_word+0x72/0x110 [<ffffffff8136f746>] pci_vpd_pci22_wait+0x96/0x130 [<ffffffff8136ff9b>] pci_vpd_pci22_read+0xdb/0x1a0 [<ffffffff8136ea30>] pci_read_vpd+0x20/0x30 [<ffffffff8137d590>] read_vpd_attr+0x30/0x40 [<ffffffff8128e037>] sysfs_kf_bin_read+0x47/0x70 [<ffffffff8128d24e>] kernfs_fop_read+0xae/0x180 [<ffffffff8120dd97>] __vfs_read+0x37/0x100 [<ffffffff812ba7e4>] ? security_file_permission+0x84/0xa0 [<ffffffff8120e366>] ? rw_verify_area+0x56/0xe0 [<ffffffff8120e476>] vfs_read+0x86/0x140 [<ffffffff8120f3f5>] SyS_read+0x55/0xd0 [<ffffffff81720f2e>] system_call_fastpath+0x12/0x71 Shutting down cpus with NMI Kernel Offset: disabled drm_kms_helper: panic occurred, switching back to text console So blacklist the access to its VPD. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.6+
* PCI: exynos: Initialize elbi_base even when using PHY frameworkJaehoon Chung2017-03-071-4/+4
| | | | | | | | | Even when using the PHY framework, we need the elbi_base. Before this patch, we didn't initialize elbi_base, which caused NULL pointer dereferences later. Fixes: e7cd7ef58e1f ("PCI: exynos: Support the PHY generic framework") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'pci-v4.11-fixes-1' of ↵Linus Torvalds2017-03-0311-3/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - fix NULL pointer dereferences in many DesignWare-based drivers due to refactoring error - fix Altera config write breakage due to my refactoring error * tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: altera: Fix TLP_CFG_DW0 for TLP write PCI: dwc: Fix crashes seen due to missing assignments
| * PCI: altera: Fix TLP_CFG_DW0 for TLP writeLey Foon Tan2017-02-281-3/+7
| | | | | | | | | | | | | | | | | | | | | | eb5767122feb ("PCI: altera: Simplify TLB_CFG_DW0 usage") used TLP_FMTTYPE_CFGRD* (instead of TLP_FMTTYPE_CFGWR*) for TLP writes, which causes writing to configuration space to fail. Fix it by using correct FMTTYPE for write operation. Fixes: eb5767122feb ("PCI: altera: Simplify TLB_CFG_DW0 usage") Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.9+
| * PCI: dwc: Fix crashes seen due to missing assignmentsGuenter Roeck2017-02-2510-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following crash, seen in dwc/pci-imx6. Unable to handle kernel NULL pointer dereference at virtual address 00000070 pgd = c0004000 [00000070] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-09686-g9e31489 #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: cb850000 task.stack: cb84e000 PC is at imx6_pcie_probe+0x2f4/0x414 ... While at it, fix the same problem in various drivers instead of waiting for individual crash reports. The change in the imx6 driver was tested with qemu. The changes in other drivers are based on code inspection and have been compile tested only. Fixes: 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> # designware-plat Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
* | Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2017-03-031-0/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block layer fixes from Jens Axboe: "A collection of fixes for this merge window, either fixes for existing issues, or parts that were waiting for acks to come in. This pull request contains: - Allocation of nvme queues on the right node from Shaohua. This was ready long before the merge window, but waiting on an ack from Bjorn on the PCI bit. Now that we have that, the three patches can go in. - Two fixes for blk-mq-sched with nvmeof, which uses hctx specific request allocations. This caused an oops. One part from Sagi, one part from Omar. - A loop partition scan deadlock fix from Omar, fixing a regression in this merge window. - A three-patch series from Keith, closing up a hole on clearing out requests on shutdown/resume. - A stable fix for nbd from Josef, fixing a leak of sockets. - Two fixes for a regression in this window from Jan, fixing a problem with one of his earlier patches dealing with queue vs bdi life times. - A fix for a regression with virtio-blk, causing an IO stall if scheduling is used. From me. - A fix for an io context lock ordering problem. From me" * 'for-linus' of git://git.kernel.dk/linux-block: block: Move bdi_unregister() to del_gendisk() blk-mq: ensure that bd->last is always set correctly block: don't call ioc_exit_icq() with the queue lock held for blk-mq block: Initialize bd_bdi on inode initialization loop: fix LO_FLAGS_PARTSCAN hang nvme: Complete all stuck requests blk-mq: Provide freeze queue timeout blk-mq: Export blk_mq_freeze_queue_wait nbd: stop leaking sockets blk-mq: move update of tags->rqs to __blk_mq_alloc_request() blk-mq: kill blk_mq_set_alloc_data() blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset nvme: allocate nvme_queue in correct node PCI: add an API to get node from vector blk-mq: allocate blk_mq_tags and requests in correct node
| * | PCI: add an API to get node from vectorShaohua Li2017-03-021-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Next patch will use the API to get the node from vector for nvme device Signed-off-by: Shaohua Li <shli@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2017-03-025-4/+5
|/ / | | | | | | | | | | | | | | | | | | | | | | | | <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Merge tag 'powerpc-4.11-2' of ↵Linus Torvalds2017-03-011-17/+64
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Highlights include: - an update of the disassembly code used by xmon to the latest versions in binutils. We've received permission from all the authors of the relevant binutils changes to relicense their changes to the relevant files from GPLv3 to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg work to get permission from everyone. - addition of the "architected" Power9 CPU table entry, allowing us to boot in Power9 architected mode under a hypervisor. - updates to the Power9 PMU code. - implementation of clear_bit_unlock_is_negative_byte() to optimise unlock_page(). - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf, t1042rdb display support, and board updates." Thanks to: Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith" * tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc: Remove leftover cputime_to_nsecs call causing build error powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU powerpc/optprobes: Fix TOC handling in optprobes trampoline powerpc/pseries: Advertise Hot Plug Event support to firmware cxl: fix nested locking hang during EEH hotplug powerpc/xmon: Dump memory in CPU endian format powerpc/pseries: Revert 'Auto-online hotplugged memory' powerpc/powernv: Make PCI non-optional powerpc/64: Implement clear_bit_unlock_is_negative_byte() powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable() powerpc/kernel: Remove error message in pcibios_setup_phb_resources() powerpc/mm: Fix typo in set_pte_at() pci/hotplug/pnv-php: Disable MSI and PCI device properly pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot() powerpc: Add POWER9 architected mode to cputable powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags() powerpc/perf: Avoid FAB_*_MATCH checks for power9 powerpc/perf: Add restrictions to PMC5 in power9 DD1 powerpc/perf: Use Instruction Counter value ...
| * | pci/hotplug/pnv-php: Disable MSI and PCI device properlyGavin Shan2017-02-171-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pnv_php_disable_irq() can be called in two paths: Bailing path in pnv_php_enable_irq() or releasing slot. The MSI (or MSIx) interrupts is disabled unconditionally in pnv_php_disable_irq(). It's wrong because that might be enabled by drivers other than pnv-php. This disables MSI (or MSIx) interrupts and the PCI device only if it was enabled by pnv-php. In the error path of pnv_php_enable_irq(), we rely on the newly added parameter @disable_device. In the path of releasing slot, @pnv_php->irq is checked. Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 360aebd85a4c ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | pci/hotplug/pnv-php: Disable surprise hotplug capability on conflictsGavin Shan2017-02-171-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The root port or PCIe switch downstream port might have been associated with driver other than pnv-php. The MSI or MSIx might also have been enabled by that driver (e.g. pcieport_drv). Attempt to enable MSI incurs below backtrace: PowerPC PowerNV PCI Hotplug Driver version: 0.1 ------------[ cut here ]------------ WARNING: CPU: 19 PID: 1004 at drivers/pci/msi.c:1071 \ __pci_enable_msi_range+0x84/0x4e0 NIP [c000000000665c34] __pci_enable_msi_range+0x84/0x4e0 LR [c000000000665c24] __pci_enable_msi_range+0x74/0x4e0 Call Trace: [c000000384d67600] [c000000000665c24] __pci_enable_msi_range+0x74/0x4e0 [c000000384d676e0] [d00000000aa31b04] pnv_php_register+0x564/0x5a0 [pnv_php] [c000000384d677c0] [d00000000aa31658] pnv_php_register+0xb8/0x5a0 [pnv_php] [c000000384d678a0] [d00000000aa31658] pnv_php_register+0xb8/0x5a0 [pnv_php] [c000000384d67980] [d00000000aa31dfc] pnv_php_init+0x60/0x98 [pnv_php] [c000000384d679f0] [c00000000000cfdc] do_one_initcall+0x6c/0x1d0 [c000000384d67ab0] [c000000000b92354] do_init_module+0x94/0x254 [c000000384d67b40] [c00000000019719c] load_module+0x258c/0x2c60 [c000000384d67d30] [c000000000197bb0] SyS_finit_module+0xf0/0x170 [c000000384d67e30] [c00000000000b184] system_call+0x38/0xe0 This fixes the issue by skipping enabling the surprise hotplug capability if the MSI or MSIx on the PCI slot's upstream port has been enabled by other driver. Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 360aebd85a4c ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Tested-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()Gavin Shan2017-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WARN_ON() causes unnecessary backtrace when putting the parent slot, which is likely to be NULL. WARNING: CPU: 2 PID: 1071 at drivers/pci/hotplug/pnv_php.c:85 \ pnv_php_release+0xcc/0x150 [pnv_php] : Call Trace: [c0000003bc007c10] [d00000000ad613c4] pnv_php_release+0x144/0x150 [pnv_php] [c0000003bc007c40] [c0000000006641d8] pci_hp_deregister+0x238/0x330 [c0000003bc007cd0] [d00000000ad61440] pnv_php_unregister_one+0x70/0xa0 [pnv_php] [c0000003bc007d10] [d00000000ad614c0] pnv_php_unregister+0x50/0x80 [pnv_php] [c0000003bc007d40] [d00000000ad61e84] pnv_php_exit+0x50/0xcb4 [pnv_php] [c0000003bc007d70] [c00000000019499c] SyS_delete_module+0x1fc/0x2a0 [c0000003bc007e30] [c00000000000b184] system_call+0x38/0xe0 Cc: <stable@vger.kernel.org> # v4.8+ Fixes: 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Tested-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | drivers/pci/hotplug: Mask PDC interrupt if requiredGavin Shan2017-02-151-5/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're supporting surprise hotplug on PCI slots behind root port or PCIe switch downstream ports, which don't claim the capability in hardware register (offset: PCIe cap + PCI_EXP_SLTCAP). PEX8718 is one of the examples. For those PCI slots, the PDC (Presence Detection Change) event isn't reliable and the underly (skiboot) firmware has best judgement. This masks the PDC event when skiboot requests by "ibm,slot-broken-pdc" property in PCI slot's device-tree node. Reported-by: Hank Chang <hankmax0000@gmail.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Willie Liauw <williel@supermicro.com.tw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | drivers/pci/hotplug: Fix initial state for empty slotGavin Shan2017-02-151-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In PowerNV PCI hotplug driver, the initial PCI slot's state is set to PNV_PHP_STATE_POPULATED if no PCI devices are connected to the slot. The PCI devices that are hot added to the slot won't be probed and populated because of the check in pnv_php_enable(): /* Check if the slot has been configured */ if (php_slot->state != PNV_PHP_STATE_REGISTERED) return 0; This fixes the issue by leaving the slot in PNV_PHP_STATE_REGISTERED state initially if nothing is connected to the slot. Fixes: 360aebd85a4 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Cc: stable@vger.kernel.org #v4.9+ Reported-by: Hank Chang <hankmax0000@gmail.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Willie Liauw <williel@supermicro.com.tw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | drivers/pci/hotplug: Handle presence detection change properlyGavin Shan2017-02-151-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The surprise hotplug is driven by interrupt in PowerNV PCI hotplug driver. In the interrupt handler, pnv_php_interrupt(), we bail when pnv_pci_get_presence_state() returns zero wrongly. It causes the presence change event is always ignored incorrectly. This fixes the issue by bailing on error (non-zero value) returned from pnv_pci_get_presence_state(). Fixes: 360aebd85a4 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Cc: stable@vger.kernel.org #v4.9+ Reported-by: Hank Chang <hankmax0000@gmail.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Willie Liauw <williel@supermicro.com.tw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | | scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada2017-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'for-next-dma_ops' of ↵Linus Torvalds2017-02-251-1/+1
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
| * | treewide: Constify most dma_map_ops structuresBart Van Assche2017-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
* | | Merge tag 'pci-v4.11-changes' of ↵Linus Torvalds2017-02-2351-2068/+2870
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
| * \ \ Merge branch 'pci/virtualization' into nextBjorn Helgaas2017-02-211-0/+23
| |\ \ \ | | | | | | | | | | | | | | | | | | | | * pci/virtualization: PCI: Add ACS quirk for Qualcomm QDF2400 and QDF2432
| | * | | PCI: Add ACS quirk for Qualcomm QDF2400 and QDF2432Sinan Kaya2017-02-171-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Qualcomm QDF2xxx root ports don't advertise an ACS capability, but they do provide ACS-like features to disable peer transactions and validate bus numbers in requests. To be specific: * Hardware supports source validation but it will report the issue as Completer Abort instead of ACS Violation. * Hardware doesn't support peer-to-peer and each root port is a root complex with unique segment numbers. * It is not possible for one root port to pass traffic to the other root port. All PCIe transactions are terminated inside the root port. Add an ACS quirk for the QDF2400 and QDF2432 products. [bhelgaas: changelog] Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
| * | | | Merge branch 'pci/msi' into nextBjorn Helgaas2017-02-211-1/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * pci/msi: PCI/MSI: Fix msi_desc->affinity memory leak when freeing MSI IRQs
| | * | | | PCI/MSI: Fix msi_desc->affinity memory leak when freeing MSI IRQsPrarit Bhargava2017-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During device setup, msix_setup_entries() and msi_setup_entry() allocate msi_desc by calling alloc_msi_entry(). alloc_msi_entry() can also allocate a affinity cpumask. During device teardown free_msi_irqs() is called and the msi_desc is freed, but the affinity cpumask is leaked. Fix it by calling free_msi_entry() which frees both the msi_desc and the affinity cpumask. [bhelgaas: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") moved alloc_msi_entry() from drivers/pci/msi.c to kernel/irq/msi.c and added a new corresponding free_msi_entry() interface. After aa48b6f70886, pci/msi.c used alloc_msi_entry(), but did its own kfree() instead of using free_msi_entry(). 28f4b04143c5 ("genirq/msi: Add cpumask allocation to alloc_msi_entry") added affinity to both alloc_msi_entry() and free_msi_entry(), but pci/msi.c didn't use free_msi_entry(), resulting in this leak.] Fixes: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Myron Stowe <mstowe@redhat.com>
| * | | | | Merge branch 'pci/enumeration' into nextBjorn Helgaas2017-02-211-12/+14
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/enumeration: PCI: Sort the list of devices with D3 delay quirk by ID
| | * | | | | PCI: Sort the list of devices with D3 delay quirk by IDAndy Shevchenko2017-02-151-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sort the list of Intel devices that have no PCI D3 delay by ID. Add a comment for group of devices that had not been marked yet. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | | Merge branch 'pci/host-xilinx' into nextBjorn Helgaas2017-02-212-14/+4
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-xilinx: PCI: xilinx-nwl: Remove mask for messages not supported by AXI PCI: xilinx: Configure PCIe MPS settings
| | * | | | | | PCI: xilinx-nwl: Remove mask for messages not supported by AXIBharat Kumar Gogada2017-02-101-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove support for vendor-defined messages which are not supported by AXI. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | | | PCI: xilinx: Configure PCIe MPS settingsBjorn Helgaas2017-02-081-1/+3
| | | |_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure PCIe MPS settings are valid when we enumerate a new hierarchy. Based-on-patch-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | | Merge branch 'pci/host-xgene' into nextBjorn Helgaas2017-02-211-6/+5
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-xgene: PCI: xgene: Configure PCIe MPS settings PCI: xgene: Fix double free on init error
| | * | | | | | PCI: xgene: Configure PCIe MPS settingsBjorn Helgaas2017-02-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure PCIe MPS settings are valid when we enumerate a new hierarchy. Based-on-patch-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | | | PCI: xgene: Fix double free on init errorDan Carpenter2017-01-301-5/+2
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "port" variable was allocated with devm_kzalloc() so if we free it with kfree() it will be freed twice. Also I changed it to propogate the error from devm_ioremap_resource() instead of returning -ENOMEM. Fixes: c5d460396100 ("PCI: Add MCFG quirks for X-Gene host controller") Also-posted-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tanmay Inamdar <tinamdar@apm.com>
| * | | | | | Merge branch 'pci/host-versatile' into nextBjorn Helgaas2017-02-211-1/+3
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-versatile: PCI: versatile: Configure PCIe MPS settings
| | * | | | | | PCI: versatile: Configure PCIe MPS settingsBjorn Helgaas2017-02-081-1/+3
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure PCIe MPS settings are valid when we enumerate a new hierarchy. Based-on-patch-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | | Merge branch 'pci/host-thunder' into nextBjorn Helgaas2017-02-211-5/+20
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-thunder: PCI: thunder-pem: Add support for cn81xx and cn83xx SoCs
| | * | | | | | PCI: thunder-pem: Add support for cn81xx and cn83xx SoCsDavid Daney2017-01-121-5/+20
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pci-thunder-pem driver was initially developed for cn88xx SoCs. The cn81xx and cn83xx members of the same family of SoCs have a slightly different configuration of interrupt resources in the PEM hardware, which prevents the INTA legacy interrupt source from functioning with the current driver. There are two fixes required: 1) Don't fixup the PME interrupt on the newer SoCs as it already has the proper value. 2) Report MSI-X Capability Table Size of 2 for the newer SoCs, so the core MSI-X code doesn't inadvertently clobber the INTA machinery that happens to reside immediately following the table. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | | Merge branch 'pci/host-rockchip' into nextBjorn Helgaas2017-02-211-39/+136
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-rockchip: PCI: rockchip: Set vendor ID from local core config space PCI: rockchip: Fix rockchip_pcie_probe() error path to free resource list PCI: rockchip: Mark PM functions as __maybe_unused PCI: rockchip: Use readl_poll_timeout() instead of open-coding it PCI: rockchip: Disable RC's ASPM L0s based on DT "aspm-no-l0s" PCI: rockchip: Add system PM support
| | * | | | | | PCI: rockchip: Set vendor ID from local core config spaceShawn Lin2017-02-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TRM says the vendor ID in the RC's configure space can be rewritten and the value must be the same as the value read from the local core configure space. But we misread that and didn't notice it before. Actually we should only able to rewrite it from the local core configure space. Fix that issue to make lspci show the correct IP vendor infomation. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | | | PCI: rockchip: Fix rockchip_pcie_probe() error path to free resource listShawn Lin2017-02-101-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rockchip_pcie_probe() calls of_pci_get_host_bridge_resources() to parse resources from DT and build a resource list. The caller is responsible for disposing of the resource list. This is normally done by pci_release_host_bridge_dev() when the host bridge is removed. If the host bridge probe fails, dispose of the resource list in the probe error path. [bhelgaas: changelog] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | | | PCI: rockchip: Mark PM functions as __maybe_unusedArnd Bergmann2017-01-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_PM_SLEEP is disabled, we get harmless build warnings: host/pcie-rockchip.c:1267:12: error: 'rockchip_pcie_resume_noirq' defined but not used [-Werror=unused-function] host/pcie-rockchip.c:1240:12: error: 'rockchip_pcie_suspend_noirq' defined but not used [-Werror=unused-function] Marking both functions as __maybe_unused avoids the warning without the need for #ifdef around them. Fixes: 013dd3d5e183 ("PCI: rockchip: Add system PM support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
| | * | | | | | PCI: rockchip: Use readl_poll_timeout() instead of open-coding itShawn Lin2017-01-301-36/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use readl_poll_timeout() instead of open-coding it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | | | PCI: rockchip: Disable RC's ASPM L0s based on DT "aspm-no-l0s"Shawn Lin2017-01-121-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rockchip's RC produces a 100MHz reference clock but there are two methods for the PHY to generate it: (1) Use the system PLL to generate a 100MHz clock. The PHY will relock it, filter signal noise, and output the reference clock. ASPM L0s works correctly, but circuit noise issues make it difficult to pass the TX compatibility test. (2) Share the SoC's 24MHZ crystal oscillator with the PHY and force the PHY's PLL to generate 100MHz internally. In this case, exit from ASPM L0s sometimes fails due to a design error in the RC receiver circuit. Even if we use extended-synch, the PHY sometimes fails to relock the bits from FTS, which will hang the system. We want the flexibility to use both clocking methods, so add a DT property, "aspm-no-l0s". If that's present, disable L0s to avoid the issues with case (2). [bhelgaas: changelog] Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org>
| | * | | | | | PCI: rockchip: Add system PM supportShawn Lin2017-01-111-0/+106
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add system PM support for Rockchip's RC. For pre S3, the EP is configured into D3 state which guarantees the link state should be in L1. So we could send PME_Turn_Off message to the EP and wait for its ACK to make the link state into L2 or L3 without the aux-supply. This could help save more power which I think should be very important for mobile devices. As note that there is a 5s timeout for RC to wait for the PMA_ACK after sending PME_Turn_Off. Technically it should depend on the hierarchy of devices but seems PCIe core framework doesn't handle the L2/3 for S3 at all. So that means we should presume to set a default value for PME_ACK. From the bug report[1], we could find a statement that Microsoft Windows versions typically wait for 5 seconds. So we are prone to take 5s for this timeout here. [1] https://lists.launchpad.net/kernel-packages/msg123315.html Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org>
| * | | | | | Merge branch 'pci/host-rcar' into nextBjorn Helgaas2017-02-211-7/+2
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-rcar: PCI: rcar: Use of_device_get_match_data() to simplify probe PCI: rcar: Add compatible string for r8a7796 PCI: rcar: Return -ENODEV from host bridge probe when no card present
| | * | | | | | PCI: rcar: Use of_device_get_match_data() to simplify probeBjorn Helgaas2017-01-311-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a DT-only driver, so the only way to call rcar_pcie_probe() is to match an entry in rcar_pcie_of_match[], so of_id cannot be NULL. Furthermore, of_id->data can only be NULL if an rcar_pcie_of_match[] entry has a NULL .data member. That's a driver defect, and we don't want to return -EINVAL, which is easy to ignore. We'd rather take the NULL pointer dereference so we notice the problem and fix it. Use of_device_get_match_data() to retrieve the hw_init_fn pointer. No functional change intended. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au>
| | * | | | | | PCI: rcar: Return -ENODEV from host bridge probe when no card presentHarunobu Kurokawa2017-01-111-1/+1
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | R-Car PCIe does not support hotplug so it is appropriate to treat the absence of a PCIe card as an -ENODEV error. Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | | Merge branch 'pci/host-mvebu' into nextBjorn Helgaas2017-02-211-42/+61
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-mvebu: PCI: mvebu: Change delay after reset to the PCIe spec mandated 100ms PCI: mvebu: Handle changes to the bridge windows while enabled
| | * | | | | | PCI: mvebu: Change delay after reset to the PCIe spec mandated 100msLucas Stach2017-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current default of 20ms cause some devices, which are slow to initialize, to not show up during the bus scanning. Change this to the PCIe spec mandated 100ms and document this in the DT binding. From PCIe base spec rev 3.0, chapter "6.6.1. Conventional Reset": To allow components to perform internal initialization, system software must wait a specified minimum period following the end of a Conventional Reset of one or more devices before it is permitted to issue Configuration Requests to those devices. With a Downstream Port that does not support Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms before sending a Configuration Request to the device immediately below that Port. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | | | PCI: mvebu: Handle changes to the bridge windows while enabledJason Gunthorpe2017-01-301-41/+60
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI core will write to the bridge window config multiple times while they are enabled. This can lead to mbus failures like this: mvebu_mbus: cannot add window '4:e8', conflicts with another window mvebu-pcie mbus:pex@e0000000: Could not create MBus window at [mem 0xe0000000-0xe00fffff]: -22 For me this is happening during a hotplug cycle. The PCI core is not changing the values, just writing them twice while active. The patch addresses the general case of any change to an active window, but not atomically. The code is slightly refactored so io and mem can share more of the window logic. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
| * | | | | | Merge branch 'pci/host-layerscape' into nextBjorn Helgaas2017-02-211-6/+1
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/host-layerscape: PCI: layerscape: Use of_device_get_match_data() to simplify probe Conflicts: drivers/pci/dwc/pci-layerscape.c