summaryrefslogtreecommitdiffstats
path: root/drivers/pci
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'irq-urgent-2025-04-18' of ↵Linus Torvalds8 days1-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc irq fixes from Ingo Molnar: - Fix BCM2712 irqchip driver Kconfig dependencies required on the Raspberry PI5 - Fix spurious interrupts on RZ/G3E SMARC EVK systems - Fix crash regression on Sun/NIU hardware - Apply MSI driver quirk for Sun Neptune chips * tag 'irq-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm2712-mip: Enable driver when ARCH_BCM2835 is enabled irqchip/renesas-rzv2h: Prevent TINT spurious interrupt net/niu: Niu requires MSIX ENTRY_DATA fields touch before entry reads PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads
| * PCI/MSI: Add an option to write MSIX ENTRY_DATA before any readsJonathan Currier12 days1-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduced a readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA. This is correct, however some hardware, like the Sun Neptune chips, the NIU module, will cause an error and/or fatal trap if any MSIX table entry is read before the corresponding ENTRY_DATA field is written to. Add an optional early writel() in msix_prepare_msi_desc(). Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Jonathan Currier <dullfire@yahoo.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
* | Merge tag 'pci-v6.15-fixes-2' of ↵Linus Torvalds9 days1-4/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Revert a reset patch that broke VFIO passthrough because devices ended up with no available reset mechanisms (Alex Williamson) * tag 'pci-v6.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: Revert "PCI: Avoid reset when disabled via sysfs"
| * Revert "PCI: Avoid reset when disabled via sysfs"Alex Williamson11 days1-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 479380efe1625e251008d24b2810283db60d6fcd. The reset_method attribute on a PCI device is only intended to manage the availability of function scoped resets for a device. It was never intended to restrict resets targeting the bus or slot. In introducing a restriction that each device must support function level reset by testing pci_reset_supported(), we essentially create a catch-22, that a device must have a function scope reset in order to support bus/slot reset, when we use bus/slot reset to effect a reset of a device that does not support a function scoped reset, especially multi-function devices. This breaks the majority of uses cases where vfio-pci uses bus/slot resets to manage multifunction devices that do not support function scoped resets. Fixes: 479380efe162 ("PCI: Avoid reset when disabled via sysfs") Reported-by: Cal Peake <cp@absolutedigital.net> Closes: https://lore.kernel.org/all/808e1111-27b7-f35b-6d5c-5b275e73677b@absolutedigital.net Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220010 Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250414211828.3530741-1-alex.williamson@redhat.com
* | PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()Zhangfei Gao2025-04-111-6/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(), but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") changed the iommu_probe_device() flow so arm_smmu_probe_device() is now invoked before the quirk, leading to failures like this: reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here! WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570 RIP: 0010:__iommu_probe_device+0x140/0x570 The SR-IOV enumeration ordering changes like this: pci_iov_add_virtfn pci_device_add pci_fixup_device(pci_fixup_header) <-- device_add bus_notify iommu_bus_notifier + iommu_probe_device + arm_smmu_probe_device pci_bus_add_device pci_fixup_device(pci_fixup_final) <-- device_attach driver_probe_device really_probe pci_dma_configure acpi_dma_configure_id - iommu_probe_device - arm_smmu_probe_device The non-SR-IOV case is similar in that pci_device_add() is called from pci_scan_single_device() in the generic enumeration path and pci_bus_add_device() is called later, after all host bridges have been enumerated. Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens before arm_smmu_probe_device(). Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/ Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> [bhelgaas: commit log, add failure info and reporter] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
* treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner2025-04-052-2/+2
| | | | | | | | | | timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge tag 'for-linus-iommufd' of ↵Linus Torvalds2025-04-011-0/+33
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd updates from Jason Gunthorpe: "Two significant new items: - Allow reporting IOMMU HW events to userspace when the events are clearly linked to a device. This is linked to the VIOMMU object and is intended to be used by a VMM to forward HW events to the virtual machine as part of emulating a vIOMMU. ARM SMMUv3 is the first driver to use this mechanism. Like the existing fault events the data is delivered through a simple FD returning event records on read(). - PASID support in VFIO. The "Process Address Space ID" is a PCI feature that allows the device to tag all PCI DMA operations with an ID. The IOMMU will then use the ID to select a unique translation for those DMAs. This is part of Intel's vIOMMU support as VT-D HW requires the hypervisor to manage each PASID entry. The support is generic so any VFIO user could attach any translation to a PASID, and the support should work on ARM SMMUv3 as well. AMD requires additional driver work. Some minor updates, along with fixes: - Prevent using nested parents with fault's, no driver support today - Put a single "cookie_type" value in the iommu_domain to indicate what owns the various opaque owner fields" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (49 commits) iommufd: Test attach before detaching pasid iommufd: Fix iommu_vevent_header tables markup iommu: Convert unreachable() to BUG() iommufd: Balance veventq->num_events inc/dec iommufd: Initialize the flags of vevent in iommufd_viommu_report_event() iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFO iommufd: Extend IOMMU_GET_HW_INFO to report PASID capability vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid vfio-iommufd: Support pasid [at|de]tach for physical VFIO devices ida: Add ida_find_first_range() iommufd/selftest: Add coverage for iommufd pasid attach/detach iommufd/selftest: Add test ops to test pasid attach/detach iommufd/selftest: Add a helper to get test device iommufd/selftest: Add set_dev_pasid in mock iommu iommufd: Allow allocating PASID-compatible domain iommu/vt-d: Add IOMMU_HWPT_ALLOC_PASID support iommufd: Enforce PASID-compatible domain for RID iommufd: Support pasid attach/replace iommufd: Enforce PASID-compatible domain in PASID path iommufd/device: Add pasid_attach array to track per-PASID attach ...
| * iommufd: Extend IOMMU_GET_HW_INFO to report PASID capabilityYi Liu2025-03-281-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PASID usage requires PASID support in both device and IOMMU. Since the iommu drivers always enable the PASID capability for the device if it is supported, this extends the IOMMU_GET_HW_INFO to report the PASID capability to userspace. Also, enhances the selftest accordingly. Link: https://patch.msgid.link/r/20250321180143.8468-5-yi.l.liu@intel.com Cc: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org> #aarch64 platform Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* | Merge tag 'mm-stable-2025-03-30-16-52' of ↵Linus Torvalds2025-04-011-5/+14
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ...
| * | mm: allow compound zone device pagesAlistair Popple2025-03-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zone device pages are used to represent various type of device memory managed by device drivers. Currently compound zone device pages are not supported. This is because MEMORY_DEVICE_FS_DAX pages are the only user of higher order zone device pages and have their own page reference counting. A future change will unify FS DAX reference counting with normal page reference counting rules and remove the special FS DAX reference counting. Supporting that requires compound zone device pages. Supporting compound zone device pages requires compound_head() to distinguish between head and tail pages whilst still preserving the special struct page fields that are specific to zone device pages. A tail page is distinguished by having bit zero being set in page->compound_head, with the remaining bits pointing to the head page. For zone device pages page->compound_head is shared with page->pgmap. The page->pgmap field must be common to all pages within a folio, even if the folio spans memory sections. Therefore pgmap is the same for both head and tail pages and can be moved into the folio and we can use the standard scheme to find compound_head from a tail page. Link: https://lkml.kernel.org/r/67055d772e6102accf85161d0b57b0b3944292bf.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Balbir Singh <balbirs@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | mm/mm_init: move p2pdma page refcount initialisation to p2pdmaAlistair Popple2025-03-171-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ZONE_DEVICE page reference counts are initialised by core memory management code in __init_zone_device_page() as part of the memremap() call which driver modules make to obtain ZONE_DEVICE pages. This initialises page refcounts to 1 before returning them to the driver. This was presumably done because it drivers had a reference of sorts on the page. It also ensured the page could always be mapped with vm_insert_page() for example and would never get freed (ie. have a zero refcount), freeing drivers of manipulating page reference counts. However it complicates figuring out whether or not a page is free from the mm perspective because it is no longer possible to just look at the refcount. Instead the page type must be known and if GUP is used a secondary pgmap reference is also sometimes needed. To simplify this it is desirable to remove the page reference count for the driver, so core mm can just use the refcount without having to account for page type or do other types of tracking. This is possible because drivers can always assume the page is valid as core kernel will never offline or remove the struct page. This means it is now up to drivers to initialise the page refcount as required. P2PDMA uses vm_insert_page() to map the page, and that requires a non-zero reference count when initialising the page so set that when the page is first mapped. Link: https://lkml.kernel.org/r/6aedb0ac2886dcc4503cb705273db5b3863a0b66.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | | Merge tag 'pci-v6.15-changes' of ↵Linus Torvalds2025-03-2879-1250/+3792
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Enable Configuration RRS SV, which makes device readiness visible, early instead of during child bus scanning (Bjorn Helgaas) - Log debug messages about reset methods being used (Bjorn Helgaas) - Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan) - Add common pci-ep-bus.yaml schema for exporting several peripherals of a single PCI function via devicetree (Andrea della Porta) - Create DT nodes for PCI host bridges to enable loading device tree overlays to create platform devices for PCI devices that have several features that require multiple drivers (Herve Codina) Resource management: - Enlarge devres table[] to accommodate bridge windows, ROM, IOV BARs, etc., and validate BAR index in devres interfaces (Philipp Stanner) - Fix typo that repeatedly distributed resources to a bridge instead of iterating over subordinate bridges, which resulted in too little space to assign some BARs (Kai-Heng Feng) - Relax bridge window tail sizing for optional resources, e.g., IOV BARs, to avoid failures when removing and re-adding devices (Ilpo Järvinen) - Allow drivers to enable devices even if we haven't assigned optional IOV resources to them (Ilpo Järvinen) - Rework handling of optional resources (IOV BARs, ROMs) to reduce failures if we can't allocate them (Ilpo Järvinen) - Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory) - Fix s390 mmio_read/write syscalls, which didn't cause page faults in some cases, which broke vfio-pci lazy mapping on first access (Niklas Schnelle) - Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was disabled only for s390 (Niklas Schnelle) - Support mmap of PCI resources on s390 except for ISM devices (Niklas Schnelle) ASPM: - Delay pcie_link_state deallocation to avoid dangling pointers that cause invalid references during hot-unplug (Daniel Stodden) Power management: - Allow PCI bridges to go to D3Hot when suspending on all non-x86 systems (Manivannan Sadhasivam) Power control: - Create pwrctrl devices in pci_scan_device() to make it more symmetric with pci_pwrctrl_unregister() and make pwrctrl devices for PCI bridges possible (Manivannan Sadhasivam) - Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc. can still access devices after pci_stop_dev() (Manivannan Sadhasivam) - If there's a pwrctrl device for a PCI device, skip scanning it because the pwrctrl core will rescan the bus after the device is powered on (Manivannan Sadhasivam) - Add a pwrctrl driver for PCI slots based on voltage regulators described via devicetree (Manivannan Sadhasivam) Bandwidth control: - Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the set_pcie_cooling_state.sh test case (Yi Lai) - Avoid a NULL pointer dereference when we run out of bus numbers to assign for a bridge secondary bus (Lukas Wunner) Hotplug: - Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and NULL pointer checks (Lukas Wunner) - Drop shpchp module init/exit logging, replace shpchp dbg() with ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers (Ilpo Järvinen) - Drop 'shpchp_debug' module parameter in favor of standard dynamic debugging (Ilpo Järvinen) - Drop unused cpcihp .get_power(), .set_power() function pointers (Guilherme Giacomo Simoes) - Disable hotplug interrupts in portdrv only when pciehp is not enabled to avoid issuing two hotplug commands too close together (Feng Tang) - Skip pciehp 'device replaced' check if the device has been removed to address a deadlock when resuming after a device was removed during system sleep (Lukas Wunner) - Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo Järvinen) Virtualization: - Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar Dave) DOE: - Expose supported DOE features via sysfs (Alistair Francis) - Allow DOE support to be enabled even if CXL isn't enabled (Alistair Francis) Endpoint framework: - Convert PCI device data so pci-epf-test works correctly on big-endian endpoint systems (Niklas Cassel) - Add BAR_RESIZABLE type to endpoint framework and add DWC core support for EPF drivers to set BAR_RESIZABLE type and size (Niklas Cassel) - Fix pci-epf-test double free that causes an oops if the host reboots and PERST# deassertion restarts endpoint BAR allocation (Christian Bruel) - Fix endpoint BAR testing so tests can skip disabled BARs instead of reporting them as failures (Niklas Cassel) - Widen endpoint test BAR size variable to accommodate BARs larger than INT_MAX (Niklas Cassel) - Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) Altera PCIe controller driver: - Add DT binding and driver support for Agilex family (P-Tile, F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar) AMD MDB PCIe controller driver: - Add DT binding and driver for AMD MDB (Multimedia DMA Bridge) (Thippeswamy Havalige) Broadcom STB PCIe controller driver: - Add BCM2712 MSI-X DT binding and interrupt controller drivers and add softdep on irq_bcm2712_mip driver to ensure that it is loaded first (Stanimir Varbanov) - Expand inbound window map to 64GB so it can accommodate BCM2712 (Stanimir Varbanov) - Add BCM2712 support and DT updates (Stanimir Varbanov) - Apply link speed restriction before bringing link up, not after (Jim Quinlan) - Update Max Link Speed in Link Capabilities via the internal writable register, not the read-only config register (Jim Quinlan) - Handle regulator_bulk_get() error to avoid panic when we call regulator_bulk_free() later (Jim Quinlan) - Disable regulators only when removing the bus immediately below a Root Port because we don't support regulators deeper in the hierarchy (Jim Quinlan) - Make const read-only arrays static (Colin Ian King) Cadence PCIe endpoint driver: - Correct MSG TLP generation so endpoints can generate INTx messages (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Identify the second controller on i.MX8MQ based on devicetree 'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Freescale Layerscape PCIe controller driver: - Drop deprecated 'num-ib-windows' and 'num-ob-windows' and unnecessary 'status' from example (Krzysztof Kozlowski) - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg") arg_count to fix probe failure on LS1043A (Ioana Ciornei) HiSilicon STB PCIe controller driver: - Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe JAILLET) Intel Gateway PCIe controller driver: - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Intel VMD host bridge driver: - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t becomes a sleepable lock, to avoid calling a sleeping function from invalid context (Ryo Takakura) MediaTek PCIe Gen3 controller driver: - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi) - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program host bridge memory aperture to this syscon node (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan) - Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander Stein) - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry Baryshkov) - Make DT iommu property required for SA8775P and prohibited for SDX55 (Dmitry Baryshkov) - Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry Baryshkov) - Add endpoint DT properties for SAR2130P and enable endpoint mode in driver (Dmitry Baryshkov) - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as RESERVED (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas Cassel) Synopsys DesignWare PCIe controller driver: - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip support for DWC debugfs features (Niklas Cassel) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset via 'reg[config]' for host controllers and 'reg[addr_space]' for endpoint controllers (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) TI J721E PCIe driver: - Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce alignment requirement from 1MB to 64KB (Niklas Cassel) Xilinx Versal CPM PCIe controller driver: - Free IRQ domain in probe error path to avoid leaking it (Thippeswamy Havalige) - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for Versal Net CPM5NC Root Port controller (Thippeswamy Havalige) - Add driver support for CPM5_HOST1 (Thippeswamy Havalige) Miscellaneous: - Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer) - Use for_each_available_child_of_node_scoped() to simplify apple, kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)" * tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits) PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args() PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4 misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts PCI: endpoint: Add intx_capable to epc_features struct dt-bindings: PCI: Add common schema for devices accessible through PCI BARs PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant PCI: brcmstb: Make const read-only arrays static ...
| * \ \ Merge branch 'pci/misc'Bjorn Helgaas2025-03-2718-70/+75
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) - Fix typos and whitespace errors (Bjorn Helgaas) * pci/misc: PCI: Fix typos tools/Makefile: Remove pci target # Conflicts: # drivers/pci/endpoint/functions/pci-epf-test.c
| | * | | PCI: Fix typosBjorn Helgaas2025-03-0818-70/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix typos and whitespace errors. Link: https://lore.kernel.org/r/20250307231715.438518-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | Merge branch 'pci/controller/dwc-cpu-addr-fixup'Bjorn Helgaas2025-03-276-91/+186
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Ioremap() msg_res region using res->start (the CPU address), not the ATU 'cpu_addr', which will be replaced with the ATU input address (which may not be the CPU address) (Frank Li) - Rename struct dw_pcie_ob_atu_cfg.cpu_addr to 'parent_bus_addr' (Frank Li) - Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init() to keep devicetree-related code together (Frank Li) - Consolidate devicetree handling in dw_pcie_host_get_resources() (Bjorn Helgaas) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Add cross-checking with .cpu_addr_fixup() and debug logging to dw_pcie_parent_bus_offset() (Frank Li) - Use devicetree 'reg[config]' via dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset for host controller (Frank Li) - Call epc_create() early in dw_pcie_ep_init() to keep devicetree-related code together (Bjorn Helgaas) - Consolidate devicetree handling in dw_pcie_ep_get_resources() (Bjorn Helgaas) - Use devicetree 'reg[addr_space]' via dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset for endpoint controller (Frank Li) - Update dw_pcie_find_index() to remove assumption that ATU input address is non-zero (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) * pci/controller/dwc-cpu-addr-fixup: PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI: dwc: Consolidate devicetree handling in dw_pcie_host_get_resources() PCI: dwc: Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init() PCI: dwc: Rename cpu_addr to parent_bus_addr for ATU configuration PCI: dwc: Use resource start as ioremap() input in dw_pcie_pme_turn_off() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.c # drivers/pci/controller/dwc/pcie-designware.h
| | * | | | PCI: intel-gw: Remove intel_pcie_cpu_addr()Frank Li2025-03-241-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove intel_pcie_cpu_addr(), the .cpu_addr_fixup() method, because the dwc core driver already handles address translation based on the devicetree description. [bhelgaas: this does require a minor dts change, but maintainer Lei Chuan Hua <lchuanhua@maxlinear.com> confirms that the driver is only used internally to Maxlinear and internal users will update dts: https://lore.kernel.org/r/BY3PR19MB507667CE7531D863E1E5F8AEBDD82@BY3PR19MB5076.namprd19.prod.outlook.com] Link: https://lore.kernel.org/r/20250305-intel-v1-1-40db3a685490@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: imx6: Remove imx_pcie_cpu_addr_fixup()Frank Li2025-03-241-17/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove imx_pcie_cpu_addr_fixup, the .cpu_addr_fixup() method, because the dwc core driver already handles address translation based on the devicetree description. Link: https://lore.kernel.org/r/20250315201548.858189-14-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
| | * | | | PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()Frank Li2025-03-243-11/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We know the parent_bus_offset, either computed from a DT reg property (the offset is the CPU physical addr - the 'config'/'addr_space' address on the parent bus) or from a .cpu_addr_fixup() (which may have used a host bridge window offset). Apply that parent_bus_offset instead of calling .cpu_addr_fixup() when programming the ATU. This assumes all intermediate addresses are at the same offset from the CPU physical addresses. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20250315201548.858189-13-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: ep: Ensure proper iteration over outbound map windowsFrank Li2025-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most systems' PCIe outbound map windows have non-zero physical addresses, but the possibility of encountering zero increased after following commit ("PCI: dwc: Use parent_bus_offset"). 'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on some hardware, which trims high address bits through bus fabric before sending to the PCIe controller. Replace the iteration logic with 'for_each_set_bit()' to ensure only allocated map windows are iterated when determining the ATU index from a given address. Link: https://lore.kernel.org/r/20250315201548.858189-12-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offsetFrank Li2025-03-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Endpoint ┌───────────────────────────────────────────────┐ │ pcie-ep@5f010000 │ │ ┌────────────────┐│ │ │ Endpoint ││ │ │ PCIe ││ │ │ Controller ││ │ bus@5f000000 │ ┌────────► │ ┌──────────┐ │ │ ││dynamically │ │ │ Outbound Transfer │ ││allocated │┌─────┐ │ Bus ┼─────►│ ATU ───────┘ ││PCI Addr ││ │ │ Fabric │Bus │ ││ ││ CPU ├───►│ │Addr │ ││ ││ │CPU │ │0x8000_0000 ││ │└─────┘Addr└──────────┘ │ ││ │ 0x7000_0000 └────────────────┘│ └───────────────────────────────────────────────┘ bus@5f000000 { compatible = "simple-bus"; ranges = <0x80000000 0x0 0x70000000 0x10000000>; pcie-ep@5f010000 { reg = <0x80000000 0x10000000>; reg-names ="addr_space"; ... }; ... }; In the diagram above, CPU writes data to outbound window address 0x7000_0000, and the bus fabric maps it to 0x8000_0000. The ATU uses bus address 0x8000_0000 as input address and maps to some PCI address dynamically allocated by a PCI device driver on the host side. The pcie-ep@5f010000 'reg[addr_space]' is the parent bus address, which is the input of PCIe controller, including the ATU. Set parent_bus_offset, the offset from the CPU address to the PCIe controller input address using dw_pcie_init_parent_bus_offset(). The parent_bus_offset is not used yet, so no functional change intended. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20250315201548.858189-11-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()Bjorn Helgaas2025-03-241-15/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consolidate devicetree resource handling in dw_pcie_ep_get_resources(). No functional change intended. Link: https://lore.kernel.org/r/20250315201548.858189-10-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
| | * | | | PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()Bjorn Helgaas2025-03-241-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move devm_pci_epc_create() to the beginning of dw_pcie_ep_init(). devm_pci_epc_create() is generic code that doesn't depend on any DWC resource, so moving it earlier keeps all the subsequent devicetree-related code together. Link: https://lore.kernel.org/r/20250315201548.858189-9-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
| | * | | | PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offsetFrank Li2025-03-242-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'ranges' property of a PCI controller's parent can indicate address translation information. Most system use 1:1 map between CPU physical and PCI controller input addresses. But some hardware, like i.MX8QXP, doesn't use 1:1 map. See below diagram: ┌─────────┐ ┌────────────┐ ┌─────┐ │ │ IA: 0x8ff8_0000 │ │ │ CPU ├───►│ ┌────►├─────────────────┐ │ PCI │ └─────┘ │ │ │ IA: 0x8ff0_0000 │ │ │ CPU Addr │ │ ┌─►├─────────────┐ │ │ Controller │ 0x7ff8_0000─┼───┘ │ │ │ │ │ │ │ │ │ │ │ │ │ PCI Addr 0x7ff0_0000─┼──────┘ │ │ └──► IOSpace ─┼────────────► │ │ │ │ │ 0 0x7000_0000─┼────────►├─────────┐ │ │ │ └─────────┘ │ └──────► CfgSpace ─┼────────────► Bus Fabric │ │ │ 0 │ │ │ └──────────► MemSpace ─┼────────────► IA: 0x8000_0000 │ │ 0x8000_0000 └────────────┘ bus@5f000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x80000000 0x0 0x70000000 0x10000000>; pcie@5f010000 { compatible = "fsl,imx8q-pcie"; reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>; reg-names = "dbi", "config"; ... }; }; Intermediate address (IA) here means the PCIe controller input address. The pcie@5f010000 'reg[config]' address is the parent bus (PCIe controller input) address of CfgSpace. The ATU in MemSpace is not explicitly described via devicetree, so we assume the offset from CPU address to intermediate MemSpace address is the same as that for CfgSpace. We could use bus@5f000000 'ranges' for the same purpose. Set parent_bus_offset using dw_pcie_init_parent_bus_offset(). The parent_bus_offset is not used yet, so no functional change intended. Link: https://lore.kernel.org/r/20250315201548.858189-8-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debugFrank Li2025-03-242-1/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dw_pcie_parent_bus_offset() looks up the parent bus address of a PCI controller 'reg' property in devicetree. If implemented, .cpu_addr_fixup() is a hard-coded way to get the parent bus address corresponding to a CPU physical address. Add debug code to compare the address from .cpu_addr_fixup() with the address from devicetree. If they match, warn that .cpu_addr_fixup() is redundant and should be removed; if they differ, warn that something is wrong with the devicetree. If .cpu_addr_fixup() is not implemented, the parent bus address should be identical to the CPU physical address because we previously ignored the parent bus address from devicetree. If the devicetree has a different parent bus address, warn about it being broken. [bhelgaas: split debug to separate patch for easier future revert, commit log] Link: https://lore.kernel.org/r/20250315201548.858189-7-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> [bhelgaas: squash Ioana Ciornei <ioana.ciornei@nxp.com> fix for NULL pointer deref when driver doesn't supply dw_pcie_ops, e.g., layerscape-pcie https://lore.kernel.org/r/20250319134339.3114817-1-ioana.ciornei@nxp.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: Add dw_pcie_parent_bus_offset()Frank Li2025-03-242-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return the offset from CPU physical address to the parent bus address of the specified element of the devicetree 'reg' property. [bhelgaas: cpu_phy_addr -> cpu_phys_addr, return offset, split .cpu_addr_fixup() checking and debug to separate patch] Link: https://lore.kernel.org/r/20250315201548.858189-6-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: Consolidate devicetree handling in dw_pcie_host_get_resources()Bjorn Helgaas2025-03-171-12/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consolidate devicetree resource handling in dw_pcie_host_get_resources(). No functional change intended. Link: https://lore.kernel.org/r/20250315201548.858189-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
| | * | | | PCI: dwc: Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init()Frank Li2025-03-171-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move devm_pci_alloc_host_bridge() to the beginning of dw_pcie_host_init(). devm_pci_alloc_host_bridge() is generic code that doesn't depend on any DWC resource, so moving it earlier keeps all the subsequent devicetree-related code together. [bhelgaas: reorder earlier in series] Link: https://lore.kernel.org/r/20250315201548.858189-4-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: Rename cpu_addr to parent_bus_addr for ATU configurationFrank Li2025-03-174-30/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename 'cpu_addr' to 'parent_bus_addr' in the DesignWare ATU configuration. The ATU translates parent bus addresses to PCI addresses, which are often the same as CPU addresses but can differ in systems where the bus fabric translates addresses before passing them to the PCIe controller. This renaming clarifies the purpose and avoids confusion. Link: https://lore.kernel.org/r/20250315201548.858189-3-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | | PCI: dwc: Use resource start as ioremap() input in dw_pcie_pme_turn_off()Frank Li2025-03-171-1/+1
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The msg_res region translates writes into PCIe Message TLPs. Previously we mapped this region using atu.cpu_addr, the input address programmed into the ATU. "cpu_addr" is a misnomer because when a bus fabric translates addresses between the CPU and the ATU, the ATU input address is different from the CPU address. A future patch will rename "cpu_addr" and correct the value to be the ATU input address instead of the CPU physical address. Map the msg_res region before writing to it using the msg_res resource start, a CPU physical address. Link: https://lore.kernel.org/r/20250315201548.858189-2-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | Merge branch 'pci/controller/xilinx-cpm'Bjorn Helgaas2025-03-271-16/+37
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Free IRQ domain in probe error path to avoid leaking it (Thippeswamy Havalige) - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for Versal Net CPM5NC Root Port controller (Thippeswamy Havalige) - Add driver support for CPM5_HOST1 (Thippeswamy Havalige) * pci/controller/xilinx-cpm: PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant PCI: xilinx-cpm: Add support for Versal Net CPM5NC Root Port controller dt-bindings: PCI: xilinx-cpm: Add compatible string for CPM5NC Versal Net host PCI: xilinx-cpm: Fix IRQ domain leak in error path of probe
| | * | | | PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variantThippeswamy Havalige2025-03-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the CPM5 check to include CPM5_HOST1 variant. Previously, only CPM5 was considered when mapping the "cpm_csr" register. With this change, CPM5_HOST1 is also supported, ensuring proper resource mapping for this variant. Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Link: https://lore.kernel.org/r/20250317124136.1317723-1-thippeswamy.havalige@amd.com
| | * | | | PCI: xilinx-cpm: Add support for Versal Net CPM5NC Root Port controllerThippeswamy Havalige2025-03-111-11/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Versal Net ACAP (Adaptive Compute Acceleration Platform) devices incorporate the Coherency and PCIe Gen5 Module, specifically the Next-Generation Compact Module (CPM5NC). The integrated CPM5NC block, along with the built-in bridge, can function as a PCIe Root Port and supports the PCIe Gen5 protocol with data transfer rates of up to 32 GT/s, and is capable of supporting up to a x16 lane-width configuration. Bridge errors are managed using a specific interrupt line designed for CPM5N. The INTx interrupt support is not available. Currently in this commit platform specific bridge errors support is not added. Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> [kwilczynski: commit log, squashed patch to fix an if-statement condition to ensure that xilinx_cpm_pcie_init_port() does not run on the CPM5NC_HOST variant from https://lore.kernel.org/linux-pci/20250311072402.1049990-1-thippeswamy.havalige@amd.com] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20250224155025.782179-4-thippeswamy.havalige@amd.com
| | * | | | PCI: xilinx-cpm: Fix IRQ domain leak in error path of probeThippeswamy Havalige2025-03-111-4/+6
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IRQ domain allocated for the PCIe controller is not freed if resource_list_first_type() returns NULL, leading to a resource leak. This fix ensures properly cleaning up the allocated IRQ domain in the error path. Fixes: 49e427e6bdd1 ("Merge branch 'pci/host-probe-refactor'") Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> [kwilczynski: added missing Fixes: tag, refactored to use one of the goto labels] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Link: https://lore.kernel.org/r/20250224155025.782179-2-thippeswamy.havalige@amd.com
| * | | | Merge branch 'pci/controller/vmd'Bjorn Helgaas2025-03-271-6/+6
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t becomes a sleepable lock (Ryo Takakura) * pci/controller/vmd: PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type
| | * | | | PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t typeRyo Takakura2025-03-181-6/+6
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> [bigeasy: reword commit message] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/r/20250218080830.ufw3IgyX@linutronix.de [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: add back report info from https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | Merge branch 'pci/controller/qcom'Bjorn Helgaas2025-03-271-0/+5
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as RESERVED (Manivannan Sadhasivam) - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry Baryshkov) - Make DT iommu property required for SA8775P and prohibited for SDX55 (Dmitry Baryshkov) - Add DT iommu and DMA-related properties for Qualcomm SM8450 (Dmitry Baryshkov) - Consolidate DMA vs non-DMA cases in DT (Dmitry Baryshkov) - Add endpoint DT properties for SAR2130P and enable endpoint mode in driver (Dmitry Baryshkov) * pci/controller/qcom: PCI: qcom-ep: Enable EP mode support for SAR2130P dt-bindings: PCI: qcom-ep: Add SAR2130P compatible dt-bindings: PCI: qcom-ep: Consolidate DMA vs non-DMA cases dt-bindings: PCI: qcom-ep: Enable DMA for SM8450 dt-bindings: PCI: qcom-ep: Describe optional IOMMU dt-bindings: PCI: qcom-ep: Describe optional dma-coherent property PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
| | * | | | PCI: qcom-ep: Enable EP mode support for SAR2130PDmitry Baryshkov2025-02-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable PCIe Endpoint mode support for the Qualcomm SAR2130P platform. This is needed, as it is not possible to use a compatible fallback on any other platform since SAR2130P uses slightly different set of clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250221-sar2130p-pci-v3-6-61a0fdfb75b4@linaro.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| | * | | | PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVEDManivannan Sadhasivam2025-02-241-0/+4
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On all Qcom endpoint SoCs, BAR0/BAR2 are 64bit BARs by default and software cannot change the type. So, mark the those BARs as 64bit BARs and also mark the successive BAR1/BAR3 as RESERVED BARs so that the EPF drivers cannot use them. Cc: stable+noautosel@kernel.org # depends on patch introducing only_64bit flag Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241231130224.38206-3-manivannan.sadhasivam@linaro.org [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| * | | | Merge branch 'pci/controller/mediatek'Bjorn Helgaas2025-03-271-15/+49
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi) - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program host bridge memory aperture to this syscon node (Lorenzo Bianconi) * pci/controller/mediatek: PCI: mediatek-gen3: Fix inconsistent indentation PCI: mediatek-gen3: Configure PBUS_CSR registers for EN7581 SoC dt-bindings: PCI: mediatek-gen3: Add mediatek,pbus-csr phandle array property PCI: mediatek-gen3: Remove leftover mac_reset assert for Airoha EN7581 SoC
| | * | | | PCI: mediatek-gen3: Fix inconsistent indentationCharles Han2025-03-051-13/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following inconsistent indentation warning: drivers/pci/controller/pcie-mediatek-gen3.c:922 mtk_pcie_parse_port() warn: inconsistent indenting Found using Smatch. No functional changes intended. Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://lore.kernel.org/r/20250305070022.4668-1-hanchunchao@inspur.com [kwilczynski: commit log, refactor if-statement around num_lanes to make it more readable, wrap overly long lines to fit 80 colums] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| | * | | | PCI: mediatek-gen3: Configure PBUS_CSR registers for EN7581 SoCLorenzo Bianconi2025-03-031-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configure PBus base address and address mask to allow the hw to detect if a given address is accessible on PCIe controller. Fixes: f6ab898356dd ("PCI: mediatek-gen3: Add Airoha EN7581 support") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20250225-en7581-pcie-pbus-csr-v4-2-24324382424a@kernel.org Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| | * | | | PCI: mediatek-gen3: Remove leftover mac_reset assert for Airoha EN7581 SoCLorenzo Bianconi2025-02-211-1/+0
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove a leftover assert for mac_reset line in mtk_pcie_en7581_power_up(). This is not harmful since EN7581 does not requires mac_reset and mac_reset is not defined in EN7581 device tree. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20250201-pcie-en7581-remove-mac_reset-v2-1-a06786cdc683@kernel.org [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| * | | | Merge branch 'pci/controller/layerscape'Bjorn Helgaas2025-03-271-1/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg") arg_count to fix probe failure on LS1043A (Ioana Ciornei) * pci/controller/layerscape: PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
| | * | | | PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()Ioana Ciornei2025-03-271-1/+1
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arg_count parameter to syscon_regmap_lookup_by_phandle_args() represents the number of argument cells following the phandle. In this case, the number of arguments should be 1 instead of 2 since the dt property looks like this: fsl,pcie-scfg = <&scfg 0>; Without this fix, layerscape-pcie fails with the following message on LS1043A: OF: /soc/pcie@3500000: phandle scfg@1570000 needs 2, found 1 layerscape-pcie 3500000.pcie: No syscfg phandle specified layerscape-pcie 3500000.pcie: probe with driver layerscape-pcie failed with error -22 Link: https://lore.kernel.org/r/20250327151949.2765193-1-ioana.ciornei@nxp.com Fixes: 149fc35734e5 ("PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com> Cc: stable@vger.kernel.org
| * | | | Merge branch 'pci/controller/j721e'Bjorn Helgaas2025-03-271-2/+3
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli) * pci/controller/j721e: PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
| | * | | | PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4Siddharth Vadapalli2025-03-261-2/+3
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e49ad667815d ("PCI: j721e: Add TI J784S4 PCIe configuration") assigned the value of .linkdown_irq_regfield for the J784S4 SoC as the "LINK_DOWN" macro corresponding to BIT(1), and as a result, the Link Down interrupts on J784S4 SoC are missed. According to the Technical Reference Manual and Register Documentation for the J784S4 SoC[1], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1", which is not the correct field for the link-state interrupt. Instead, it is BIT(10) of the "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds to the link-state field named as "ENABLE_SYS_EN_PCIE_LINK_STATE". Thus, set .linkdown_irq_regfield to the macro "J7200_LINK_DOWN", which expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs already reuse this macro since it accurately represents the "link-state" field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register. 1: https://www.ti.com/lit/zip/spruj52 Fixes: e49ad667815d ("PCI: j721e: Add TI J784S4 PCIe configuration") Cc: stable@vger.kernel.org Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> [kwilczynski: commit log, add a missing .linkdown_irq_regfield member set to the J7200_LINK_DOWN macro to struct j7200_pcie_ep_data] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Link: https://lore.kernel.org/r/20250305132018.2260771-1-s-vadapalli@ti.com
| * | | | Merge branch 'pci/controller/imx6'Bjorn Helgaas2025-03-271-69/+19
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Identify the second controller on i.MX8MQ based on devicetree 'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu) - Use devm_clk_bulk_get_all() to fetch clocks to simplify the code (Richard Zhu) * pci/controller/imx6: PCI: imx6: Use devm_clk_bulk_get_all() to fetch clocks PCI: imx6: Identify controller via 'linux,pci-domain', not address
| | * | | | PCI: imx6: Use devm_clk_bulk_get_all() to fetch clocksRichard Zhu2025-03-151-61/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_clk_bulk_get_all() helper to simplify clock handle code. No functional changes intended. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [kwilczynski: commit log, refactor to use dev_err_probe()] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20250226025628.1681206-1-hongxing.zhu@nxp.com
| | * | | | PCI: imx6: Identify controller via 'linux,pci-domain', not addressRichard Zhu2025-03-151-9/+6
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of testing the controller register address to distinguish controller 1 from controller 0 on i.MX8MQ platforms, use the PCI domain number, which comes from the devicetree 'linux,pci-domain' property. All relevant devicetrees should already supply 'linux,pci-domain', which was added by c0b70f05c87f ("arm64: dts: imx8mq: use_dt_domains for pci node"). Instead of being set directly in imx_pcie_probe(), pci->dbi_base will be set by the DWC core in dw_pcie_get_resources(). No functional changes intended. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250226024256.1678103-3-hongxing.zhu@nxp.com
| * | | | Merge branch 'pci/controller/hyperv'Bjorn Helgaas2025-03-271-1/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Correct comment to say that invalidations from a PF driver are delivered to the VF endpoint driver, not by the VF driver (Easwar Hariharan) * pci/controller/hyperv: PCI: hv: Correct a comment
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-26 19:36:11 +0000