summaryrefslogtreecommitdiffstats
path: root/sound/hda/hdac_controller.c
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda: hdac_controller: Implement support for use_pio_for_commands modePeter Ujfalusi2024-04-181-7/+120
| | | | | | | | | | | | | | | | | In case the use_pio_for_commands flag is set we must not enable the CORB DMA to make sure that it is not interfering with the immediate command mode. Convert the snd_hdac_bus_send_cmd/snd_hdac_bus_get_response as wrappers to call either the PIO or CORB based command handling depending on the use_pio_for_commands flag. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <20240409083812.14001-3-peter.ujfalusi@linux.intel.com>
* ALSA: hda: Using polling mode for loongson controller by defaultYanteng Si2023-06-071-1/+4
| | | | | | | | | | | | On loongson controller, RIRBSTS.RINTFL cannot be cleared, azx_interrupt() is called all the time. We disable RIRB interrupt, and use polling mode by default. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/d309a75424d438b958d90d797b4f1ba45468e090.1686128807.git.siyanteng@loongson.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Interrupt servicing and BDL setup for compress streamsCezary Rojewski2022-12-051-2/+2
| | | | | | | | | | | | | Account for compress streams when receiving and servicing buffer completed interrupts. In case of compress stream enlisting hdac_stream for data transfer, setup BDL entries much like it is the case for PCM streams. Signed-off-by: Divya Prakash <divya1.prakash@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20221202152841.672536-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ALSA: hda: Reset all SIE bits in INTCTLAmadeusz Sławiński2022-07-091-5/+2
| | | | | | | | | | | | | | | | | | | Old code resets SIE for up to 8 streams using byte accessor, but register is laid out in following way: 31 GIE 30 CIE 29:x Reserved x-1:0 SIE If there is more than 8 streams, some of them may and up with enabled interrupts. To fix this just clear whole INTCTL register when disabling interrupts. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220706120230.427296-8-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: avoid write to STATESTS if controller is in resetKai Vehmanen2021-10-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: add link_power op to hdac_bus_opsKai Vehmanen2021-02-081-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | The extended HDA bus (hdac_ext) provides interfaces for more fine-grained control of individual links than what plain HDA provides for. Links can be powered off when they are not used and if all links are released, controller can shut down the command DMA. These interfaces are currently not used by common HDA codec drivers. When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(), but there is no link to the HDA extended bus, and on controller side the links are shut down only when all codecs are suspended. This patch adds link_power() to hdac_bus ops. Controllers using the HDA extended core, can use this to plug in snd_hdac_ext_bus_link_power() to implement more fine-grained control of link power. No change is needed for plain HDA controllers nor to existing HDA codec drivers. Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210205184630.1938761-2-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: avoid reset of sdo_limitSameer Pujar2020-08-191-11/+0
| | | | | | | | | | | | | | | | By default 'sdo_limit' is initialized with a default value of '8' as per spec. This is overridden in cases where a different value is required. However this is getting reset when snd_hdac_bus_init_chip() is called again, which happens during runtime PM cycle. Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()' function which would be called only once. Fixes: 67ae482a59e9 ("ALSA: hda: add member to store ratio for stripe control") Cc: <stable@vger.kernel.org> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Unexport some local helper functionsTakashi Iwai2020-05-161-0/+1
| | | | | | | | | snd_hdac_bus_queue_event() and snd_hdac_bus_exec_verb() are used only internally in HD-audio core. Let's drop the exports and move the declarations into local.h. Link: https://lore.kernel.org/r/20200516062854.22141-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: add member to store ratio for stripe controlSameer Pujar2020-05-041-0/+12
| | | | | | | | | | | | | | | Stripe control programming is governed by following formula, which is referenced from the HD Audio specification(Revision 1.0a). { ((num_channels * bits_per_sample) / number of SDOs) >= 8 } Currently above is implemented in snd_hdac_get_stream_stripe_ctl(). This patch introduces a structure member to store the default factor of '8'. If any HW wants to use a different value, this member can be easily updated. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1588580176-2801-3-git-send-email-spujar@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Update kernel-doc function parameter descriptionsKeyon Jie2020-01-141-1/+1
| | | | | | | | | | Make W=1 throws a lot of warnings, with multiple misalignments between function params and their descriptions. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200113205638.27338-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Comment about snd_hdac_bus_update_rirb() and spinlockTakashi Iwai2019-12-141-0/+1
| | | | | | | | | The call of snd_hdac_bus_update_rirb() needs the bus->reg_lock spinlock protection for concurrency. Comment about it more explicitly. Link: https://lore.kernel.org/r/20191213163005.19116-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Unify get_response handlingTakashi Iwai2019-12-131-1/+10
| | | | | | | | | | | | | | | | | | Now most of the get_response handling became quite similar between HDA-core and legacy drivers, and the only differences are: - the handling of extra-long polling delay for some codecs - the debug message for the stalled communication and both are worth to share in the common code. This patch unifies the code into snd_hdac_bus_get_response(), and use this from the legacy get_response callback. It results in a good amount of code reduction in the end. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191212191101.19517-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Use waitqueue for RIRB in HDA-core helper, tooTakashi Iwai2019-12-131-2/+14
| | | | | | | | | | | | | This patch implements the same logic that was done for the legacy HD-audio controller driver by the commit 88452da92ba2 ("ALSA: hda: Use standard waitqueue for RIRB wakeup") to the HDA-core helper code, too. This makes snd_hdac_bus_get_response() waiting for the response with bus->rirb_wq instead of polling when bus->polling is false. It'll save both CPU time and response latency. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191212191101.19517-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Use standard waitqueue for RIRB wakeupTakashi Iwai2019-12-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HD-audio CORB/RIRB communication was programmed in a way that was documented in the reference in decades ago, which is essentially a polling in the waiter side. It's working fine but costs CPU cycles on some platforms that support only slow communications. Also, for some platforms that had unreliable communications, we put longer wait time (2 ms), which accumulate quite long time if you execute many verbs in a shot (e.g. at the initialization or resume phase). This patch attempts to improve the situation by introducing the standard waitqueue in the RIRB waiter side instead of polling. The test results on my machine show significant improvements. The time spent for "cat /proc/asound/card*/codec#*" were changed like: * Intel SKL + Realtek codec before the patch: 0.00user 0.04system 0:00.10elapsed 40.0%CPU after the patch: 0.00user 0.01system 0:00.10elapsed 10.0%CPU * Nvidia GP107GL + Nvidia HDMI codec before the patch: 0.00user 0.00system 0:02.76elapsed 0.0%CPU after the patch: 0.00user 0.00system 0:00.01elapsed 17.0%CPU So, for Intel chips, the total time is same, while the total time is greatly reduced (from 2.76 to 0.01s) for Nvidia chips. The only negative data here is the increase of CPU time for Nvidia, but this is the unavoidable cost for faster wakeups, supposedly. Link: https://lore.kernel.org/r/20191210145727.22054-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Revert "ALSA: hda: Flush interrupts on disabling"Takashi Iwai2019-10-281-2/+0
| | | | | | | | | | | | | | | | | | | | | This reverts commit caa8422d01e983782548648e125fd617cadcec3f. It turned out that this commit caused a regression at shutdown / reboot, as the synchronize_irq() calls seems blocking the whole shutdown. Also another part of the change about shuffling the call order looks suspicious; the azx_stop_chip() call disables the CORB / RIRB while the others may still need the CORB/RIRB update. Since the original commit itself was a cargo-fix, let's revert the whole patch. Fixes: caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333 BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/hda-bus-ops-cleanup' into for-nextTakashi Iwai2019-08-081-9/+9
|\ | | | | | | | | | | Pull HD-audio bus ops cleanups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda: Remove page allocation redirectionTakashi Iwai2019-08-081-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HD-audio core allocates and releases pages via driver's specific dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This was because some platforms require the uncached pages and the handling of page flags had to be done locally in the driver code. Since the recent change in ALSA core memory allocator, we can simply pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only difference became about this type to be passed to the core allocator. That is, it's good time for cleaning up the mess. This patch changes the allocation code in HD-audio core to call the core allocator directly so that we get rid of dma_alloc_pages and dma_free_pages io_ops. If a driver needs the uncached pages, it has to set bus->dma_type right after the bus initialization. This is merely a code refactoring and shouldn't bring any behavior changes. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: Flush interrupts on disablingChris Wilson2019-07-221-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was looking at <4> [241.835158] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [241.835181] CPU: 1 PID: 214 Comm: kworker/1:3 Tainted: G U 5.2.0-CI-CI_DRM_6509+ #1 <4> [241.835199] Hardware name: Dell Inc. OptiPlex 745 /0GW726, BIOS 2.3.1 05/21/2007 <4> [241.835234] Workqueue: events snd_hdac_bus_process_unsol_events [snd_hda_core] <4> [241.835256] RIP: 0010:input_handle_event+0x16d/0x5e0 <4> [241.835270] Code: 48 8b 93 58 01 00 00 8b 52 08 89 50 04 8b 83 f8 06 00 00 48 8b 93 00 07 00 00 8d 70 01 48 8d 04 c2 83 e1 08 89 b3 f8 06 00 00 <66> 89 28 66 44 89 60 02 44 89 68 04 8b 93 f8 06 00 00 0f 84 fd fe <4> [241.835304] RSP: 0018:ffffc9000019fda0 EFLAGS: 00010046 <4> [241.835317] RAX: 6b6b6b6ec6c6c6c3 RBX: ffff8880290fefc8 RCX: 0000000000000000 <4> [241.835332] RDX: 000000006b6b6b6b RSI: 000000006b6b6b6c RDI: 0000000000000046 <4> [241.835347] RBP: 0000000000000005 R08: 0000000000000000 R09: 0000000000000001 <4> [241.835362] R10: ffffc9000019faa0 R11: 0000000000000000 R12: 0000000000000004 <4> [241.835377] R13: 0000000000000000 R14: ffff8880290ff1d0 R15: 0000000000000293 <4> [241.835392] FS: 0000000000000000(0000) GS:ffff88803de80000(0000) knlGS:0000000000000000 <4> [241.835409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [241.835422] CR2: 00007ffe9a99e9b7 CR3: 000000002f588000 CR4: 00000000000006e0 <4> [241.835436] Call Trace: <4> [241.835449] input_event+0x45/0x70 <4> [241.835464] snd_jack_report+0xdc/0x100 <4> [241.835490] snd_hda_jack_report_sync+0x83/0xc0 [snd_hda_codec] <4> [241.835512] snd_hdac_bus_process_unsol_events+0x5a/0x70 [snd_hda_core] <4> [241.835530] process_one_work+0x245/0x610 which has the hallmarks of a worker queued from interrupt after it was supposedly cancelled (note the POISON_FREE), and I could not see where the interrupt would be flushed on shutdown so added the likely suspects. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111174 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v5.3' of ↵Takashi Iwai2019-07-081-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * treewide: Add SPDX license identifier for missed filesThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ALSA: hda: Fix a headphone detection issue when using SOFRander Wang2019-07-011-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To save power, the hda hdmi driver in ASoC invokes snd_hdac_ext_bus_link_put to disable CORB/RIRB buffers DMA if there is no user of bus and invokes snd_hdac_ext_bus_link_get to set up CORB/RIRB buffers when it is used. Unsolicited responses is disabled in snd_hdac_bus_stop_cmd_io called by snd_hdac_ext_bus_link_put , but it is not enabled in snd_hdac_bus_init_cmd_io called by snd_hdac_ext_bus_link_get. So for put-get sequence, Unsolicited responses is disabled and headphone can't be detected by hda codecs. Now unsolicited responses is only enabled in snd_hdac_bus_reset_link which resets controller. The function is only called for setup of controller. This patch enables Unsolicited responses after RIRB is initialized in snd_hdac_bus_init_cmd_io which works together with snd_hdac_bus_reset_link to set up controller. Tested legacy hda driver and SOF driver on intel whiskeylake. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: fix: lock reg_lock before calling snd_hdac_bus_update_rirbBard Liao2019-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | The patch is to fix commit 5e13cf6cd64c (ALSA: hda: add polling mode in snd_hdac_bus_get_response) spin_lock_irq should be called before snd_hdac_bus_update_rirb. Fixes: 5e13cf6cd64c ("ALSA: hda: add polling mode in snd_hdac_bus_get_response") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: add polling mode in snd_hdac_bus_get_responseBard Liao2019-05-281-0/+2
|/ | | | | | | Polling mode is useful if a machine somehow missed an expected IRQ. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Fix mismatches for register mask and value in hdac controllerKeyon Jie2019-01-091-3/+5
| | | | | | | | | | | | E.g. for azx_int_enable(), we should set both mask and value to be "AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN"(the mask was 0) to enable controller CIE and GIE. We have similar issues on setting AZX_GCTL_RESET and AZX_GCTL_UNSOL, here try to correct all of them. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: don't call skl_init_chip() to reset intel skl socYu Zhao2018-09-121-3/+4
| | | | | | | | | | | | | | | | | | | Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* sound: enable interrupt after dma buffer initializationYu Zhao2018-09-121-2/+6
| | | | | | | | | | | | | | | In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'for-next' into for-linusTakashi Iwai2017-11-131-1/+2
|\ | | | | | | | | | | Pull 4.15 updates to take over the previous urgent fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda: Abort capability probe on invalid capabilityRakesh Ughreja2017-10-241-1/+2
| | | | | | | | | | | | | | | | | | | | On reading wrong capability pointer values driver may crash, so whenever driver discovers unknown HDA capability, log it as error and stop traversing the link list further. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: Abort capability probe at invalid register readTakashi Iwai2017-10-181-0/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when it hits an invalid register value read: BUG: unable to handle kernel paging request at ffffad5dc41f3fff IP: pci_azx_readl+0x5/0x10 [snd_hda_intel] Call Trace: snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core] azx_probe_continue+0x7d5/0x940 [snd_hda_intel] ..... This happened on a new Intel machine, and we need to check the value and abort the loop accordingly. [Note: the fixes tag below indicates only the commit where this patch can be applied; the original problem was introduced even before that commit] Fixes: 6720b38420a0 ("ALSA: hda - move bus_parse_capabilities to core") Cc: <stable@vger.kernel.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Fix cpu lockup when stopping the cmd dmasJeeja KP2017-05-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq()) causes hard lockup so unlock while waiting using jiffies. ---<-snip->--- <0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 <4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem <4>[ 1211.603053] irq event stamp: 13366 <4>[ 1211.603053] hardirqs last enabled at (13365): ... <4>[ 1211.603059] Call Trace: <4>[ 1211.603059] ? delay_tsc+0x3d/0xc0 <4>[ 1211.603059] __delay+0xa/0x10 <4>[ 1211.603060] __const_udelay+0x31/0x40 <4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core] <4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel] <4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core] <4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec] <4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel] <4>[ 1211.603061] pci_pm_suspend+0x71/0x140 <4>[ 1211.603062] dpm_run_callback+0x6f/0x330 <4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0 <4>[ 1211.603062] __device_suspend+0xf9/0x370 <4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60 <4>[ 1211.603063] async_suspend+0x1a/0x90 <4>[ 1211.603063] async_run_entry_fn+0x34/0x160 <4>[ 1211.603063] process_one_work+0x1f4/0x6d0 <4>[ 1211.603063] ? process_one_work+0x16e/0x6d0 <4>[ 1211.603064] worker_thread+0x49/0x4a0 <4>[ 1211.603064] kthread+0x107/0x140 <4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0 <4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40 <4>[ 1211.603065] ret_from_fork+0x2e/0x40 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419 Fixes: 38b19ed7f81ec ("ALSA: hda: fix to wait for RIRB & CORB DMA to set") Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> CC: stable <stable@vger.kernel.org> # 4.7 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v4.12' of ↵Takashi Iwai2017-05-021-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.12 A quiet release for the core, but lots of new drivers this time around: - A new, generalized, API for hooking up jacks which makes it easier to write generic machine drivers for simple cases. - Continuing fixes for issues with the x86 CPU drivers. - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132, HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with DA7213
| * ALSA: hda: Fix LLCH register readB, Jayachandran2017-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | LLCH is a 16 bit register. Use readw instead of readl API. Signed-off-by: B, Jayachandran <jayachandran.b@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ALSA: hda - Avoid tricky macrosTakashi Iwai2017-04-031-1/+1
|/ | | | | | | | | | | | | The macros _snd_hdac_chip_read() and *_write() expand to different types (b,w,l) per their argument. They were thought to be used only internally for other snd_hdac_chip_*() macros, but in some situations we need to call these directly, and they are way too ugly. Instead of saving a few lines, we just write these macros explicitly with the types, so that they can be used in a saner way. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - move bus_parse_capabilities to coreVinod Koul2016-08-091-0/+75
| | | | | | | | | HDA capability introduced recently are move to hdac core so that it can be used by legacy driver as well. Also move the capability pointers up to hdac_bus object. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: fix to wait for RIRB & CORB DMA to setJeeja KP2016-05-081-0/+17
| | | | | | | | | | | | | If the DMAs are not being quiesced properly, it may lead to stability issues, so the recommendation is to wait till DMAs are stopped. After setting the stop bit of RIRB/CORB DMA, we should wait for stop bit to be set. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Loop interrupt handling until really clearedTakashi Iwai2016-02-261-1/+6
| | | | | | | | | | | | | | | | | | | | | Currently the interrupt handler of HD-audio driver assumes that no irq update is needed while processing the irq. But in reality, it has been confirmed that the HW irq is issued even during the irq handling. Since we clear the irq status at the beginning, process the interrupt, then exits from the handler, the lately issued interrupt is left untouched without being properly processed. This patch changes the interrupt handler code to loop over the check-and-process. The handler tries repeatedly as long as the IRQ status are turned on, and either stream or CORB/RIRB is handled. For checking the stream handling, snd_hdac_bus_handle_stream_irq() returns a value indicating the stream indices bits. Other than that, the change is only in the irq handler itself. Reported-by: Libin Yang <libin.yang@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - moved alloc/free stream pages function to controller libraryJeeja KP2015-04-161-0/+58
| | | | | | | | | | Moved azx_alloc_stream_pages and azx_free_stream_pages to controller library. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add the controller helper codes to hda-core moduleTakashi Iwai2015-04-161-0/+449
This patch adds the controller helper codes to hda-core library. The I/O access ops are added to the bus ops. The CORB/RIRB, the basic attributes like irq# and iomap address, some locks and the list of streams are added to the bus object, together with the stream object and its helpers. Currently the codes are just copied from the legacy driver, so you can find duplicated codes in both directories. Only constants are removed from the original hda_controller.h. More integration work will follow in the later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 16:09:55 +0000